1:2 Computer Graphics Video with S/PDIF or Stereo Audio Twisted

 TP-50
1:2 Computer Graphics Video with S/PDIF or
Stereo Audio Twisted Pair Receiver
| VGA/UXGA - 15-pin HD The TP-50 is a twisted pair receiver for computer
graphics video and unbalanced stereo audio or
S/PDIF audio signals. The unit converts the twisted
pair signal back into two computer graphics video,
stereo audio and S/PDIF audio signals simultaneously
FEATURES
Max. Resolution - WUGXA
Looping CAT 5 Input
Level (Gain) & EQ (Peaking) Controls
H & V Sync Polarity Settings
Power Connect™ System - A single connection to the transmitter or the receiver powers both units
when the devices are within 150ft (50m) of each other
Link LED - Indicates that the receiver is receiving a signal
System Range - Up to 100m (320ft)
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5
TECHNICAL SPECIFICATIONS
INPUT:
1 twisted pair with loop on an RJ−45 connector
OUTPUTS:
2 UXGA on 15−pin HD connectors, 2 unbalanced stereo audio on 3.5mm mini
jacks, 2 S/PDIF on RCA connectors
MAX. OUTPUT
LEVEL:
Video: 2Vpp @max gain.; Audio: 4.6Vpp (analog)
MAX. RESOLUTION:
WUXGA
AUDIO BANDWIDTH: 22kHz
DIFF. GAIN:
4.7%
DIFF. PHASE:
0.3Deg
K-FACTOR:
<0.05%
S/N RATIO:
Video: 62.5dB; Audio: 69.2dB
CONTROLS:
Video level: −9.5dB to +2.2dB; Video EQ: 0 to +26.3dB @50MHz
PRODUCT
DIMENSION:
12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H
PRODUCT WEIGHT:
0.2kg (0.4lbs) approx
SHIPPING
DIMENSION:
23.20cm x 12.00cm x 8.90cm (9.13" x 4.72" x 3.50" ) W, D, H
SHIPPING WEIGHT:
0.5kg (1.2lbs) approx
COUPLING:
Video: DC; Audio: Input: AC; Output: Analog:DC; S/PDIF: AC
AUDIO THD + NOISE: 0.035% @1kHz
AUDIO 2nd
HARMONIC:
0.003% @1kHz
POWER
CONSUMPTION:
12V DC, 800mA
INCLUDED
ACCESSORIES:
Power supply
OPTIONS:
RK−3T 19" rack adapter
Download PDF
Similar pages