Module No. 2072

Module No. 2072
2072-1
ABOUT THIS MANUAL
• Button operations are indicated using the letters shown in the illustration.
• Display characters appear either as black-on-white or white-on-black, depending on the model of your watch. All sample displays in this manual are shown as
black-on-white.
• Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be
found in the “REFERENCE” section.
GENERAL GUIDE
• Press A to change from mode to mode.
• When you return to the Timekeeping Mode from another mode, the Home City code appears first, followed after a few seconds by the current time. See “TIMEKEEPING MODE” for
details.
Timekeeping Mode
World Time Mode
Setting the Current Time
Seconds
Hour : Minutes
Use the following procedure to select a city (city code) as
your Home City, and then set its time and date.
• The times in the Timekeeping Mode and World Time
Mode are linked. Because of this, make sure you select
a “Home City” (the city whose time and date you are
setting), before you set the time and date.
• Changing the city code setting usually changes the time
setting and sometimes changes the date setting.
• Once you select a Home City and set its time, you can
view the current time in other cities by simply changing
the city code setting.
Daylight Saving Time automatically advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving
Time.
To toggle your Home City time between DST and Standard Time
1. In the Timekeeping Mode, hold down B until the city
code starts to flash.
2. Press B once to move the flashing to the DST On/Off
setting.
3. Press C to toggle Daylight Saving Time ( AN displayed)
and Standard Time ( Af displayed).
4. After you make the settings you want, hold down B
until the setting on the display stops flashing.
• The DST indicator appears on the display to indicate
DST indicator
that Daylight Saving Time is turned on.
To set the current time
1. In the Timekeeping Mode, hold down B until the city
code starts to flash.
2. Use A and C to scroll through the city codes until the
one you want to set as your Home City.
• C scrolls forward, while A scrolls back through city
codes.
• See the “CITY CODE TABLE” at the back of this manual for a complete list of available codes.
3. Press B to move the flashing in the sequence shown
below to select other settings.
City code
City Code
DST On/Off
Day
Month
WORLD TIME MODE
City code
The World Time Mode lets you view the current time in
any one of 40 cites around the world. You can also momentarily display the current date in the selected city and
the Timekeeping Mode time (Home City time).
Selecting the World Time City
1. In the World Time Mode, hold down B until the city
code starts to flash.
2. Use A and C to scroll through the city codes until the
one you want is on the display.
• C scrolls forward, while A scrolls back through city
codes.
• See the “CITY CODE TABLE” at the back of this manual for a complete list of available codes.
3. Hold down B until the setting on the display stops flashing.
Hour
Seconds
Minutes
Year
• See “Daylight Saving Time (DST)” for details on DST On/Off setting.
4. Press B until the seconds digits are flashing on the display.
5. While the seconds digits are selected (flashing), press C to reset the seconds to
AA.
• Pressing C while the seconds count is in the range of 30 to 59 resets the seconds
to AA and adds 1 to the minutes. In the range of 00 to 29, the minutes count is
unchanged.
6. Press B until the hour digits are flashing on the display.
7. Press C to increase the setting or A to decrease it.
8. Repeat steps 6 and 7 to set the minutes, year, month, and day.
9. After you make the settings you want, hold down B until the digits on the display
stop flashing.
Current time in the
selected city
Viewing the Current Date and Timekeeping Mode Screens
In the World Time Mode, press B to display the current date of the selected city
code, and C to display the Timekeeping Mode screen. The screen you select remains on the display for a few seconds, and then the watch returns to the current
time of the selected city code.
Year Month Day
Home city code
Home city time
Selected city code
In the Timekeeping Mode, press B to display the current date screen, and C to
display the World Time Mode screen. The screen you select remains on the display
for a few seconds, and then the watch returns to the current time.
Day of week
Home city code
Day of week
Viewing the Current Date and World Time Mode Screens
Year Month Day
File Mode
Daylight Saving Time (DST)
TIMEKEEPING MODE
In addition to normal timekeeping, use the Timekeeping Mode to set the current time
and date. You can also momentarily display the World Time screen.
PM indicator
Day Counter Mode
Selected city code
City code
Current time in the
selected city
Home city code
[Date]
[Timekeeping Mode]
• The six digits of the date screen show the year, month and day. The date indicated
in the example above is June 30, 1999.
Toggling World Time between DST and Standard Time
Use the following procedure to toggle between Standard Time and Daylight Saving
Time.
[Date]
[World Time Mode]
• The six digits of the date screen show the year, month and day. The date indicated
in the example above is June 30, 1999.
DST indicator
1. In the World Time Mode, hold down B until the city
code starts to flash.
2. Press B once to move the flashing to the DST On/Off
setting.
3. Press C to toggle Daylight Saving Time ( AN displayed)
and Standard Time ( Af displayed).
4. Hold down B until the setting on the display stops flashing.
• The DST indicator appears on the display to indicate
that Daylight Saving Time is turned on.
2072-2
DAY COUNTER MODE
FILE MODE
The Day Counter Mode lets you count the number of days
from the Timekeeping Mode’s current date to a specific
target date. An indicator flashes on the display when the
target date is reached.
• There are 10 Day Counter records, each of which can
be set with its own title and target date.
• A Day Counter record has a title field, a target date field,
and a day counter field.
indicator flashes
• When a target date is reached, the
on the display in the Timekeeping Mode and World Time
indicator also flashes in the Day Counter
Mode. The
Mode when the screen for the target is on the display.
indicator flashes on the target date each year,
• The
regardless of the year setting of the target date.
Title
Memo text
[Timekeeping Mode]
[Number]
Recalling Day Counter Data
In the Day Counter Mode, press C to scroll through the Day Counter record titles.
When the record you want is on the display, press B to view its other data (target
date and day counter).
Press .
[Title]
The File Mode lets you input up to 10 records of memo
text and number data for instant recall when you need
them.
• A File Mode record has a text field and a number field.
• Inputting data into the number field without inputting
anything in the text field causes the text field to show
---- on the display, which can be mistaken for an
empty record. Because of this, it is a good idea to always input both text and number data for each record.
• Remember that credit card and other sensitive data
can be misuse when the watch is in the hands of
another party.
• To protect against the misuse of the data, input them
in coded form that cannot be understood by others.
[Target Date]
Inputting New File Data
1. In the File Mode, press C until a record with ---(indicating no text in the text field) appears.
2. Hold down B until the flashing cursor appears on the
display.
3. Use A and C to scroll through the available characters in the following sequence.
[Day Counter]
Cursor
Press
.
Press
.
(space)
Press C .
Year Month Day
• Holding down C scrolls through the titles at high speed.
• The six digits of the target date indicate the year, month, and day. The above display indicates January 1, 2001.
• ---- appears as the title for any Day Counter record that does not have a title
assigned to it.
• The above procedure displays all 10 records, regardless of whether or not they
contain any data.
• The day counter value has a plus sign ( ) in front of it when the corresponding
target date comes after the current date, or a minus sign ( /) in front of it when the
target date comes before the current date.
• Day Counter Mode data reverts to the following defaults whenever the battery of
the watch is replaced.
First Record: Title ( NEXT), Target date ( ABABAB)
Records 2 – 10: Titles ( ----), Target date ( ABABAB)
Setting New Day Counter Data
1. In the Day Counter Mode, press C until a record with
---- (indicating no text) for the title appears.
2. Hold down B until the flashing cursor appears on the
display.
3. Use A and C to scroll through the available characters
in the following sequence.
to
4. When the character you want is at the cursor position, press B to move the cursor
to the right.
5. Repeat the steps 3 and 4 until your memo text is complete.
• You can input up to eight characters for your memo text.
6. After you input your memo text, use B to move the cursor to the number field.
• You tell when you are in the text field because of the long cursor ( -). The number
field has a short cursor ( /).
• The memo text field has spaces for eight characters, so you must press B to move
the past the 8th character in order to get to the number field.
• The number field has spaces for 24 digits. Pressing B until the cursor moves past
the 24th digit causes it to jump back to the first character of the memo text field.
7. Use A and C to change the character (space, number, plus symbol, or hyphen) at
the cursor position in the number field. The character changes in the following
sequence.
Press
.
Press
.
(space)
to
8. When the character you want is at the cursor position, press B to move the cursor
to the right.
9. Repeat steps 7 and 8 until you complete number input.
• You can input up to 24 digits for number.
10. Hold down B until the cursor disappears from the display.
Recalling File Data
1. In the File Mode, press C to scroll through the records.
• Holding down C scrolls through the records at high speed.
• Only memory text data (field) appears when you scroll through File Data records.
• All 10 File Mode records appear, regardless of whether or not they contain data.
2. Press B to toggle the screen between the memo text and number fields.
Cursor
Press
.
Press
.
(space)
to
4. When the character you want is at the cursor position, press B to move the flashing cursor to the right.
5. Repeat the steps 3 and 4 until your title is complete.
• You can input up to eight characters for your title.
6. After you input your title, press B until the year setting
appears, with the year digits flashing.
• The title field has spaces for eight characters, so you
must press B to move the cursor goes past the 8th character in order to get to the year setting.
7. Press C to increase the setting or A to decrease it.
• The year can be set in the range 1940 to 2039.
8. After you set the year, press B so the month digits are
flashing.
9. Press C to increase the setting or A to decrease it.
10. After you set the month, press B so the day digits are
flashing.
11. Press C to increase the setting or A to decrease it.
12. Hold down B until the digits on the display stop flashYear Month Day
ing.
Changing Day Counter Mode Data
1. In the Day Counter Mode, scroll through the titles until the one you want to change
is on the display.
2. Hold down B until the flashing cursor appears on the display.
3. Use B to move the flashing to the location you want to change. Each press of B
shifts the flashing in the following sequence.
Title
Year
Month
Day
• The title field has spaces for eight characters, so you must press B to move the
cursor goes past the 8th character in order to get to the year setting.
4. Use A and C to change the character or the setting.
• For details on setting the data, see “Setting New Day Counter Data” (steps 3 for
title input and 7 for year, month, and day).
• Pressing A and C at the same time while the cursor is
flashing in the title clears the title and changes the target date so it matches the current Timekeeping Mode
date.
• Pressing A and C at the same time while the year,
month, or day digits are flashing changes the target date
so it matches the current Timekeeping Mode date.
5. Hold down B until the digits on the display stop flashing.
Press B .
[Memo Text]
[Number]
Editing File Data
1. In the File Mode, scroll through the records and display the text field of the one you
want to edit.
2. Hold down B until the cursor appears on the display.
3. Use B to move the cursor to the character you want to change.
4. Use A and C to change the character.
• For details on inputting characters, see “Inputting New File Data” (steps 3 for memo
text input and 7 for number).
5. Hold down B until the cursor disappears from the display.
Deleting File Data
1. In the File Mode, scroll through the records and display the text field of the one you
want to delete.
2. Hold down B until the cursor appears on the display.
3. Press A and C at the same time to delete the data item.
• After the data item is deleted, the cursor appears on the display.
4. Hold down B until the cursor disappears from the display.
2072-3
REFERENCE
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and functions of this watch.
CITY CODE TABLE
City Code
City
GMT differential
Display Text
ADL
ADELAIDE
+9.5
Up to four characters of Day Counter Mode title and File Mode memo text can be
shown on the display. Up to six digits of numeric data can be shown in the File Mode.
Text data longer than four characters and number data longer than six digits automatically scrolls across the display from right to left.
ANC
ANCHORAGE
–09
BER
BERLIN
+01
BKK
BANGKOK
+07
CAI
CAIRO
+02
CCS
CARACAS
–04
CHI
CHICAGO
–06
DAC
DHAKA
+06
+5.5
Continuously scrolls
Separator
• A separator is inserted automatically between the last and first character or digit.
DEL
DELHI
DEN
DENVER
–07
DXB
DUBAI
+04
GUM
GUAM
+10
HKG
HONG KONG
+08
Data and Setting Scrolling
HNL
HONOLULU
–10
The A and C buttons are used in various setting screens to scroll through the available settings on the display. In most cases, holding down these buttons during a
scroll operation scrolls through the settings at high speed.
IST
ISTANBUL
+02
JED
JEDDAH
+03
12-hour/24-hour Timekeeping
JRS
JERUSALEM
+02
You can select either 12-hour or 24-hour timekeeping independently for the Timekeeping Mode and World Time Mode.
KBL
KABUL
+4.5
+05
Auto Return Feature
• If you leave a screen with flashing digits or cursor on the display for one or two
minutes without performing any operation, the watch automatically saves anything
you have input up to that point and exits the setting screen.
• If you leave the watch in Day Counter Mode and File Mode for one or two minutes
without performing any operation, it automatically changes to the Timekeeping Mode.
To toggle between the 12-hour and 24-hour formats
In the Timekeeping Mode or World Time Mode, hold down C for about two seconds
to toggle between 12-hour and 24-hour timekeeping.
• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits
for times in the range of noon to 11:59 pm. No indicator is shown from midnight to
11:59 am.
• With the 24-hour format, times are indicated in the range of 00:00 to 23:59, with no
indicator.
• With 24-hour timekeeping, only the tens digit of the seconds count appears on the
display. The units digit is not shown. 50 seconds, for example, is indicated as FA in
12-hour timekeeping and as /F in 24-hour timekeeping.
Timekeeping Mode
• The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
• The year can be set in the range of 1995 to 2039.
• The watch’s built-in full automatic calendar automatically makes allowances for different month lengths and leap years. Once you set the date, there should be no
reason to change it except after the replacement of the watch’s battery.
World Time Mode
• The current time in all World Time Mode cities is calculated in accordance with the
Greenwich Mean Time (GMT) differential for each city, based on the current Home
City time setting in the Timekeeping Mode.
• GMT differential is calculated by this watch based on Universal Time Coordinated
(UTC) data.
• The seconds count of the World Time is synchronized with the seconds count of the
Timekeeping Mode.
• The city code that is displayed when you leave the World Time Mode will still be
displayed when you enter the World Time Mode again.
KHI
KARACHI
LAX
LOS ANGELES
–08
LON
LONDON
+00
MEX
MEXICO CITY
–06
MIA
MIAMI
–05
MIL
MILAN
+01
MLE
MALE
+05
NOU
NOUMEA
+11
NYC
NEW YORK
–05
+01
PAR
PARIS
PPG
PAGO PAGO
–11
RGN
YANGON
+6.5
RIO
RIO DE JANEIRO
–03
ROM
ROME
+01
SEL
SEOUL
+09
SFO
SAN FRANCISCO
–08
SIN
SINGAPORE
+08
SYD
SYDNEY
+10
THR
TEHRAN
+3.5
TYO
TOKYO
+09
WLG
WELLINGTON
+12
YVR
VANCOUVER
–08
*Based on data as of June 1998.
Download PDF
Similar pages