Industrial 4 Port Device Server, Model SC10E4IG-L

San Telequip (P) Ltd.,
4 Crystal House, 235, Navi Peth
Off LBS Road, Pune 411 030
Phone : 020 24320023, 24324423, 65001587
email : info@santelequip.com
Connecting. Converting. Leading !
Industrial 4 Port Device Server, Model SC10E4IG-L Series
SC10E4IG-L series Device servers can conveniently and transparently
connect up to four Serial ports to an Ethernet network. Data transmission
between the Serial and Ethernet interfaces is bi-directional. You can both
centralize the management of your Serial devices, and distribute
management hosts over the network.
SC10E4IG-L series Device servers can be used to connect different devices
for remote data polling or event handling over a TCP/IP network. Each
Serial port can operates independently to provide maximum versatility.
For example, port 1 can operate in Driver mode, port 2 in TCP Server
mode, and ports 3 and 4 in TCP Client mode etc
HIGHLIGHTS
•
•
•
•
•
•
•
•
•
Data access modes include TCP Server, TCP Client, UDP, Virtual COM.
Dual 10/100 Ethernet for redundancy with full duplex auto negotiation
Dual Ethernet ports support 2 IP / 2 MAC / Dual Subnet or Switch mode and Redundant mode.
Support web-based configuration, Telnet and Console CLI.
Support VLAN tagging and QinQ function
LCD Display has four Keys for configuration and selecting the operation mode.
Built-in 15 KV ESD protection for all Serial Signals
Redundancy Dual DC power.
Password protection on Web page.+ Keypad
SPECIFICATIONS :
Ethernet port
• Number of Ports
• Fiber
• Type
• Isolation
• TCP Server
• TCP Client
• UDP
: 2*RJ45
: 1*SFP ( Optional )
: 10/100 Base-T OR 10/100/1000 Base T, 100 Base-FX
: 1.5KV
: Up to 4 connections
: Up to 4 Destinations
: Up to 4 Destinations
Operating Modes
Redundant Mode: The system will use only one port for data transfer. If the port is disconnected, the whole
system will change to another port automatically
Dual Subnet Mode : 2 Different IP’s, Different Class can communicate with our Device Server
Serial interface
• Number of ports
• Serial standards
• Connectors
• Port Isolation
:4
: RS422/RS485, DIP selectable
: 5 Pin Terminal Blocks, 3.81mm
: 2.5KV
Serial Line Protection
• 15KV ESD on all signals
• 2KV EFT protection
• 2KV surge protection
Page 1 of 2,
San Telequip (P) Ltd.,
4 Crystal House, 235, Navi Peth
Off LBS Road, Pune 411 030
Phone : 020 24320023, 24324423, 65001587
email : info@santelequip.com
Connecting. Converting. Leading !
Serial Communication Parameters
• Operation Mode
: RS422 / RS485, DIP Switch selectable.
• Baud Rate
: 300 bps to 115.2 Kbps
• Data Bits
: 5, 6, 7, 8
• Parity
: Odd, Even, None, mark, space
• Stop Bits
: 1, 2
• Flow Control
: XON/XOFF, None
Serial signals
• RS-485 (4-wire) Tx+, Tx-, Rx+, Rx-, GND / RS-422 Tx+, Tx-, Rx+, Rx-, GND
• RS-485 (2-wire) Data+, Data-, GND
LCD
: 2 Line, 22 characters , 4 Keys
Protocols
: TCP, IP, UDP, ARP, ICMP, HTTP, DHCP client, Telnet, SNMP, DNS, VLAN, QinQ, SMTP,
SNTP
: Win7, Win8, Win2008 Server, Win2012 Server
: Web Browser / Windows based Utility : Device Manager
: Serial Statistics, Syslog
Operating System
Configuration
Diagnostic
LED indicators
• PWR, SYS, ACT, TX1~4, RX1~4
Other
• MTBF
• Watch Dog Timer
:188251 hours / 21.5 years
: 20 sec Software Auto Reset
Environmental
• Storage Temperature
• Operating Temperature
• Operating Humidity
: -40 to 85°C
: -10 to 60°C
: 5% to 95% Non-condensing
Power
• Redundant Input power Dual DC inputs : 12-48VDC on 6-pin terminal block
• Power consumption
:5 Watts
• Overload current protection
: Present
• Reverse polarity protection
: Present on terminal block
Physical Characteristic
• Enclosure
• Mounting
• Dimension (W x D x H)
•
Weight (g)
Model Codification
Base Model
Page 2 of 2,
: IP-30
: DIN rail
: 52(W) x 104(D) x 136(H) mm
: 40.5(W) x 143(D) x 210(H) mm
: 600gms max
: Without LCD
: LCD
: SC10E4IG F/G-L
SC10E4IG
F/G
L
S
: Isolated 4 Port RS485/444 Gateway
: Ethernet Port : F : 10/100, G: 10/100/1000
: For LCD Option
: SFP
Download PDF
Similar pages