Fiber Optic Accessories
Alantek®
Communication
USA
Specification Sheet
Fiber Optic Splice Tray
This 12 core Fiber Optic Splice Tray is used in wall mount patch panel, easy to operate and
stackable for high fiber count applications.
Can be stack into our wall mount patch panel.
Certification and Compliance:
TIA/EIA 568.C (Optical Fiber Cabling Components Standard).
ISO/IEC 11801 (Generic cabling for customer premises).
IEC 61073-1 (Mechanical splices and fusion splice protectors for optical fibers and cables)
EN50173 (Telecommunications Infrastructure Standard for Data Centre).
2011/65/EU (ROHS2.0, Directive on Restriction of Hazardous Substances.)
Features:
Center holes for mounting of the tray.
Multiple tie down holes for securing incoming fiber.
Storage and protect splice fibers.
Large bent radius, simple to install and operate.
Durable injection-molded plastic tray and cover.
Accommodate standard heat shrink sleeves in 60mm lengths with 2.5mm shrinked diameter.
Specifications:
Part Number :
306-8RST12-0000
Dimension (LxWxH)
150 x 110 x 11 mm
Body & Cover Material
PC
Splice Capacity
12
Operating temperature
-40°C to +60°C
Optional Parts:
306-FS0030-0060
3.0mm fusion splice sleeve, 60mm
Alantek® Communications USA . This information provides a general description of product and shall not form part of any
contract. Improvement or changes may be made to the product without advanced notification
Download PDF
Similar pages