AV Receiver
Owner’s Manual
Read the supplied booklet “Safety Brochure” before using the unit.
English
CONTENTS
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7 Connecting other devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connecting an external power amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
FEATURES
6
Connecting recording devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connecting a device compatible with the trigger function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
8 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front panel (RX-V777) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
9 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . 33
10 Optimizing the speaker settings automatically (YPAO) . . . . . . . . . 34
Front panel (RX-V677) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Measuring at one listening position (single measure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Front display (indicators) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Measuring at multiple listening positions (multi measure) (RX-V777 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Rear panel (RX-V777) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Checking the measurement results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Rear panel (RX-V677) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Reloading the previous YPAO adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Warning messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
PREPARATIONS
14
11 Connecting to a network device wirelessly . . . . . . . . . . . . . . . . . . . . 42
Selecting the connection method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Connecting the unit to a wireless network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connecting a mobile device to the unit directly (Wireless Direct) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
1 Placing speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PLAYBACK
50
Connecting front speakers that support bi-amp connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Input/output jacks and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Basic playback procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Selecting an HDMI output jack (RX-V777 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
3 Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Selecting the input source and favorite settings with one touch
4 Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
(SCENE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Connecting video devices (such as BD/DVD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Configuring scene assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Connecting audio devices (such as CD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Connecting to the jacks on the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5 Connecting the FM/AM antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
6 Connecting a network cable or the wireless antenna . . . . . . . . . . . . . 30
Connecting the network cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Selecting the sound mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Enjoying stereoscopic sound fields (CINEMA DSP 3D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Enjoying unprocessed playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Enjoying pure high fidelity sound (Pure Direct) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Enjoying compressed music with enhanced sound (Compressed Music Enhancer) . . . . . . . . . . . . . . . . . . . 57
Connecting the wireless antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
En
2
Listening to FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
CONFIGURATIONS
90
Setting the frequency steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Registering favorite radio stations (presets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Radio Data System tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Operating the radio on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Playing back iPod music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Configuring input sources (Input menu) . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Input menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Configuring the SCENE function (Scene menu) . . . . . . . . . . . . . . . . . . . . 92
Scene menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Connecting an iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Configuring sound programs/surround decoders
Playback of iPod content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
(Sound Program menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Playing back music stored on a USB storage device . . . . . . . . . . . . . . . 66
Sound Program menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Configuring various functions (Setup menu) . . . . . . . . . . . . . . . . . . . . . . 97
Playback of USB storage device contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Setup menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Playing back music stored on media servers (PCs/NAS) . . . . . . . . . . . . 69
Speaker (Manual Setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Playback of PC music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
Listening to Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
Playback of Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Registering favorite Internet radio stations (bookmarks) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Multi Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Playing back music with AirPlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
ECO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Playback of iTunes/iPod music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Playing back music in multiple rooms (multi-zone) . . . . . . . . . . . . . . . . 78
Viewing information about the unit (Information menu) . . . . . . . . . 114
Preparing Zone2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Types of information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Controlling Zone2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Configuring the system settings (ADVANCED SETUP menu) . . . . . . 116
Controlling the unit from a web browser (web control) . . . . . . . . . . . . 83
ADVANCED SETUP menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
Viewing the current status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Changing the speaker impedance setting (SP IMP.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
Switching information on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Viewing the status information on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Selecting the remote control ID (REMOTE ID) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
Changing the FM/AM tuning frequency setting (TU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Switching the video signal type (TV FORMAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Configuring playback settings for different playback sources
Removing the limitation on HDMI video output (MON.CHK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
(Option menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Restoring the default settings (INIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Option menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Updating the firmware (UPDATE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Checking the firmware version (VERSION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Updating the unit’s firmware via the network . . . . . . . . . . . . . . . . . . . 119
En
3
APPENDIX
120
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Power, system and remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
USB and network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Error indications on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Ideal speaker layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Audio information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
HDMI and video information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Network information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Yamaha technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Supported devices and file formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Video signal flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Audio Return Channel (ARC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
HDMI signal compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
En
4
Accessories
Operating range of the remote control
Check that the following accessories are supplied with the product.
• Point the remote control at the remote control sensor on the unit and remain within the operating range
shown below.
 Remote control
 Batteries (AAA, R03, UM-4) (x2)
(RX-V777)
(RX-V677)
Within
6 m (20 ft)
30°
30°
30°
30°
Insert the batteries the right
way round.
 AM antenna
 FM antenna
*One of the above is supplied depending on the region of
purchase.
 YPAO microphone
 Wireless antenna
• The illustrations of the main unit and remote control used in this manual are of the RX-V777 (U.S.A.
model), unless otherwise specified.
• (RX-V777 [China, Korea, U.K. and Europe models] only)
For information on how to control external devices with the remote control, refer to “Supplement for
Remote Control” on the supplied CD-ROM.
• Some features are not available in certain regions.
• Due to product improvements, specifications and appearance are subject to change without notice.
 CD-ROM (Owner’s Manual)
 Easy Setup Guide
 Safety Brochure
• This manual explains operations using the supplied remote control.
• This manual describes all the “iPod”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod”, “iPhone”
and “iPad”, unless otherwise specified.
•
indicates precautions for use of the unit and its feature limitations.
•
indicates supplementary explanations for better use.
Accessories
En
5
FEATURES
What you can do with the unit
Wide variety of supported content
• iPod/iPhone/iPad
. p.63
• USB
. p.66
• Media server (PC/NAS)
. p.69
• Internet radio
. p.73
• AirPlay
. p.76
Supports 2- to 7.1-channel (plus presence)
speaker system. Allows you to enjoy your favorite
acoustic spaces in various styles.
• Automatically optimizing the speaker . p.34
settings to suit your room (YPAO)
• Reproducing stereo or multichannel . p.53
sounds with the sound fields like
actual movie theaters and concert halls
(CINEMA DSP)
• Enjoying compressed music with
. p.57
enhanced sound (Compressed Music
Enhancer)
• Playing back music in multiple rooms . p.78
(multi-zone)
Network contents
Control
Speakers
Audio
iPod/iPhone/iPad
Audio
USB device
HDMI Control
3D and 4K Ultra HD
signals supported
Audio
HDMI Control
Audio/Video
BD/DVD player
Audio/Video
TV
AV receiver (the unit)
Control
Audio/Video
(via HDMI/MHL)
Smartphone/Tablet
Change the input source
and favorite settings with
one touch (SCENE)
. p.51
Sequential operation of a TV,
AV receiver, and BD/DVD
player (HDMI Control)
TV remote control
. p.134
FEATURES ➤ What you can do with the unit
En
6
Full of useful functions!
Useful tips
❑ Connecting various devices (p.25)
❑ Creating 3-dimensional sound fields (p.53)
A number of HDMI jacks and various input/output jacks
on the unit allow you to connect video devices (such as
BD/DVD players), audio devices (such as CD players),
game consoles, camcorders, and other devices.
Connecting presence speakers allows you to create a
natural 3-dimensional sound field in your own room
(CINEMA DSP 3D). Even when no presence speakers
are connected, the Virtual Presence Speaker (VPS)
function produces 3D surround sound.
❑ Playing back TV audio in surround sound
with a single HDMI cable connection
(Audio Return Channel: ARC) (p.23)
The combination of video/audio input jacks does not
match an external device...
Use “Audio In” in the “Input” menu to change the
combination of video/audio input jacks so that it matches
the output jack(s) of your external device (p.26).
Video and audio are not synchronized...
Use “Lipsync” in the “Setup” menu to adjust the delay
between video and audio output (p.103).
I want to hear audio from the TV speakers...
When using an ARC-compatible TV, you only need one
HDMI cable to enable video output to the TV, audio
input from the TV, and the transmission of HDMI Control
signals.
Use “Audio Output” in the “Setup” menu to select the
output destination of signals input into the unit (p.107).
Your TV speakers may be selected as an output
destination.
I want to get more bass sounds…
HDMI Control
TV audio
Set “Extra Bass” in the “Option” menu to “On” to enjoy
enhanced bass sounds (p.89).
Video from
external device
I want to change the on-screen menu language...
❑ Various wireless connection methods (p.42)
The unit supports the Wi-Fi feature that allows the unit to
connect to your wireless router (access point) without a
network cable connection. In addition, Wireless Direct
enables connecting a mobile device to the unit directly
without router.
❑ Surround playback with 5 speakers placed
in front (p.55)
If you have surround speakers but there is no space to
place them in the rear of your room, you can place them in
the front and enjoy multi-channel surround sound with the
5 speakers placed in the front (Virtual CINEMA FRONT).
❑ Low power consumption (p.113)
Wi-Fi or
Wireless Direct
Use “Language” in the “Setup” menu to select a
language from English, Japanese, French, German,
Spanish, Russian, Italian and Chinese (p.33).
I want to update the firmware...
Use “UPDATE” in the “ADVANCED SETUP” menu to
update the unit’s firmware (p.118). If the unit is
connected to the Internet, a message will be displayed
on the TV when a firmware update is available (p.119).
Many other settings are available that let you to
customize the unit. For details, see the following pages.
The ECO mode (power saving function) reduces the
unit’s power consumption.
• Input settings (p.90)
❑ Easy operation and wireless music
playback from iPhone or Android™ device
• Sound program and surround decoder settings (p.95)
By using the application for smartphone/tablet “AV
CONTROLLER”, you can control the unit from an
iPhone, iPad, iPod touch or Android devices. Visit the
Yamaha website for details.
• Information view (such as audio signal and video
signal) (p.114)
• SCENE settings (p.93)
• Various function settings (p.98)
• System settings (p.116)
FEATURES ➤ What you can do with the unit
En
7
Part names and functions
Front panel (RX-V777)
1
2
3 4 5 6
7
8 9
:
AM
TUNING
A
MAIN ZONE
B
PURE DIRECT
ZONE 2
ZONE CONTROL
MEMORY
INFO (WPS)
PRESET
FM
INPUT
VOLUME
SCENE
BD
DVD
YPAO MIC
PHONES
TV
TONE CONTROL
NET
PROGRAM
RADIO
STRAIGHT
SILENT CINEMA
C
1 MAIN ZONE z key
Turns on/off (standby) the unit.
2 Standby indicator
Lights up when the unit is in standby mode under any of the
following conditions.
• HDMI Contorol is enabled (p.106)
• Standby Through is enabled (p.107)
• Network Standby is enabled (p.108)
• An iPod is being charged (p.63)
3 ZONE 2 key
Enables/disables the audio output to Zone2 (p.81).
4 ZONE CONTROL key
Changes the zone (main zone or the Zone2) that is controlled
by the keys and knobs on the front panel (p.81).
5 INFO (WPS) key
Selects the information displayed on the front display (p.86).
Enters the wireless network connection setup (WPS push
button configuration) by holding down for 3 seconds (p.44).
6 MEMORY key
Registers FM/AM radio stations as preset stations (p.59).
7 PRESET keys
D
VIDEO AUX
HDMI/
MHL 5V 1A
E
F G H
I
J
5V
VIDEO
2.1A
K
8 FM and AM keys
Switch between FM and AM (p.58).
9 Front display
Displays information (p.10).
0 Remote control sensor
Receives remote control signals (p.5).
A TUNING keys
Select the radio frequency (p.58).
B PURE DIRECT key
Enables/disables Pure Direct (p.57).
C INPUT knob
Selects an input source.
D PHONES jack
For connecting headphones.
E YPAO MIC jack
For connecting the supplied YPAO microphone (p.34).
F TONE CONTROL key
Adjusts the high-frequency range and low-frequency range
of output sounds (p.88).
L
G SCENE keys
Select the registered input source, sound program, and
various settings with one touch. Also, turns on the unit when
it is in standby mode (p.51).
H PROGRAM keys
Select a sound program or a surround decoder (p.52).
I STRAIGHT key
Enables/disables the straight decode mode (p.56).
J VIDEO AUX (HDMI/MHL IN) jack
For connecting a device, such as a camcorder and a game
console (p.28) or a smartphone (p.29).
K USB jack
For connecting a USB storage device (p.66) or an iPod
(p.63).
VIDEO jack
For inputting video when “USB” is selected as the input
source.
L VOLUME knob
Adjusts the volume.
Select a preset FM/AM radio station (p.59).
FEATURES ➤
Part names and functions
En
8
Front panel (RX-V677)
1
23
MAIN ZONE
4
56 7 8
9
: A
B
C
YPAO MIC
PURE DIRECT
ZONE 2
ZONE CONTROL
INFO (WPS)
MEMORY
PRESET
FM
AM
TUNING
VOLUME
SCENE
BD
DVD
PHONES
INPUT
TV
TONE CONTROL
NET
PROGRAM
RADIO
STRAIGHT
SILENT CINEMA
D
1 MAIN ZONE z key
Turns on/off (standby) the unit.
2 Standby indicator
Lights up when the unit is in standby mode under any of the
following conditions.
• HDMI Contorol is enabled (p.106)
• Standby Through is enabled (p.107)
• Network Standby is enabled (p.108)
• An iPod is being charged (p.63)
3 YPAO MIC jack
For connecting the supplied YPAO microphone (p.34).
4 ZONE 2 key
Enables/disables the audio output to Zone2 (p.81).
5 Remote control sensor
Receives remote control signals (p.5).
6 ZONE CONTROL key
Changes the zone (main zone or the Zone2) that is controlled
by the keys and knobs on the front panel (p.81).
7 INFO (WPS) key
Selects the information displayed on the front display (p.86).
Enters the wireless network connection setup (WPS push
button configuration) by holding down for 3 seconds (p.44).
VIDEO AUX
HDMI/
MHL 5V 1A
E
F G H
I
J
VIDEO
5V
2.1A
K
8 MEMORY key
Registers FM/AM radio stations as preset stations (p.59).
9 PRESET keys
Select a preset FM/AM radio station (p.59).
0 FM and AM keys
Switch between FM and AM (p.58).
A Front display
Displays information (p.10).
B TUNING keys
Select the radio frequency (p.58).
C PURE DIRECT key
Enables/disables Pure Direct (p.57).
D PHONES jack
For connecting headphones.
E INPUT keys
Select an input source.
F TONE CONTROL key
Adjusts the high-frequency range and low-frequency range
of output sounds (p.88).
L
G SCENE keys
Select the registered input source, sound program, and
various settings with one touch. Also, turns on the unit when
it is in standby mode (p.51).
H PROGRAM keys
Select a sound program or a surround decoder (p.52).
I STRAIGHT key
Enables/disables the straight decode mode (p.56).
J VIDEO AUX (HDMI/MHL IN) jack
For connecting a device, such as a camcorder and a game
console (p.28) or a smartphone (p.29).
K USB jack
For connecting a USB storage device (p.66) or an iPod
(p.63).
VIDEO jack
For inputting video when “USB” is selected as the input
source.
L VOLUME knob
Adjusts the volume.
FEATURES ➤
Part names and functions
En
9
Front display (indicators)
1
2
3
4
5
6 7
ENHANCER STEREO TUNED
OUT 1
2
89 :
A
B
PARTY SLEEP MUTE
ZONE
2
VOL.
ADAPTIVE DRC VIRTUAL
FPL L C R FPR
SL
SW
SR
SBL SB SBR
C
1 ECO
Lights up when the unit is in the eco mode (p.113).
2 HDMI
Lights up when HDMI signals are being input or output.
OUT1/OUT2 (RX-V777 only)
Indicates the HDMI OUT jacks currently outputting an HDMI
signal
OUT (RX-V677 only)
Lights up when HDMI signals are being output.
3 ENHANCER
Lights up when Compressed Music Enhancer (p.57) is
working.
4 CINEMA DSP
Lights up when CINEMA DSP or CINEMA DSP 3D (p.53) is
working.
5 STEREO
Lights up when the unit is receiving a stereo FM radio signal.
TUNED
Lights up when the unit is receiving an FM/AM radio station
signal.
6 Signal strength indicator
D
7 PARTY (RX-V777 only)
Lights up when the unit is in the party mode. (p.82)
8 SLEEP
Lights up when the sleep timer is on.
9 ZONE2
Lights up when audio output to Zone2 is enabled (p.81).
0 MUTE
Blinks when audio is muted.
A Volume indicator
Indicates the current volume.
B VIRTUAL
Lights up when the Virtual Presence Speaker (VPS) (p.53) or
the virtual surround processing (p.55) is working.
C E
F
F Speaker indicators
Indicate speaker terminals from which signals are output.
A Front speaker (L)
S Front speaker (R)
D Center speaker
F Surround speaker (L)
G Surround speaker (R)
H Surround back speaker (L)
J Surround back speaker (R)
K Surround back speaker
B Presence speaker (L)
N Presence speaker (R)
L Subwoofer
C Cursor indicators
Indicate the remote control cursor keys currently operational.
D Information display
Displays the current status (such as input name and sound
mode name). You can switch the information by pressing
INFO (p.86).
E ADAPTIVE DRC
Lights up when Adaptive DRC (p.88) is working.
Indicates the strength of the wireless network signal (p.42).
FEATURES ➤
Part names and functions
En
10
Rear panel (RX-V777)
1 2 3
4
6
5
7
9
8
0
A
B
(U.S.A. model)
TRIGGER OUT
12V 0.1A
WIRELESS
DC OUT
5V 0.5A
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
HDMI 4
HDMI 5
NETWORK
(BD/DVD)
(NET)
IN
2
1
ARC
OUT
EXTRA SP
ZONE2/F.PRESENCE
REMOTE
OPTICAL
VIDEO
(TV)
AV4
ANTENNA
COMPONENT
VIDEO
(RADIO)
AM
COAXIAL
FM
PR
AV3
Y
PR
PB
SPEAKERS
PB
AV2
VIDEO
VIDEO
FRONT
OPTICAL
CENTER
SURROUND
SURROUND BACK/BI-AMP
CENTER
Y
AV 1
MONITOR OUT
COMPONENT VIDEO
SINGLE
SINGLE
1
2
AUDIO 1
C
AUDIO 2
ZONE 2
AV 5
AV 6
AV OUT
ZONE OUT
FRONT
SURROUND
SUR. BACK
PRE OUT
DE F G
1 REMOTE IN/OUT jacks
For connecting to an infrared signal receiver/emitter that
allows you to operate the unit and other devices from another
room (p.80).
2 TRIGGER OUT jack
For connecting to a device that supports the trigger function
(p.32).
3 DC OUT jack
For connecting to an optional accessory.
4 HDMI OUT 1–2 jacks
For connecting to HDMI-compatible TVs and outputting
video/audio signals (p.23). When using ARC, TV audio signal
can also be input through the HDMI OUT 1 jack.
5 ANTENNA jacks
For connecting to FM and AM antennas (p.29).
6 MONITOR OUT jacks
COMPONENT VIDEO jacks
For connecting to a TV that supports component video and
outputting video signals (p.23).
VIDEO jack
For connecting to a TV that supports composite video and
outputting video signals (p.24).
SUBWOOFER
* The area around the video/audio output jacks is
marked in white on the actual product to
prevent improper connections.
H
7 HDMI 1–5 jacks
For connecting to HDMI-compatible playback devices and
inputting video/audio signals (p.25).
8 SPEAKERS terminals
For connecting to speakers (p.19).
9 NETWORK jack
For connecting to a network with a network cable (p.30).
0 WIRELESS jack
For connecting the supplied wireless antenna (p.30).
A VOLTAGE SELECTOR
(General model only)
Selects the switch position according to your local voltage
(p.32).
E AV 1–6 jacks
For connecting to video/audio playback devices and
inputting video/audio signals (p.25).
F AV OUT jacks
For outputting video/audio to a recording device (such as a
VCR) (p.31).
G ZONE2 OUT jacks
For connecting to the external amplifier used in Zone2 and
for outputting audio (p.79).
H PRE OUT jacks
For connecting to a subwoofer with built-in amplifier or to an
external power amplifier (p.31).
B Power cable
For connecting to an AC wall outlet (p.32).
C PHONO jacks
(Except for U.S.A. and Canada models)
For connecting to a turntable (p.28).
D AUDIO 1–2 jacks
For connecting to audio playback devices and inputting
audio signals (p.28).
FEATURES ➤
Part names and functions
En
11
Rear panel (RX-V677)
1 2 3
4
5
6
8
7
9
0
A
B
(U.S.A. model)
TRIGGER OUT
12V 0.1A
WIRELESS
DC OUT
5V 0.5A
HDMI OUT
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
NETWORK
(BD/DVD)
(NET)
IN
ARC
OUT
EXTRA SP
REMOTE
OPTICAL
ZONE2/F.PRESENCE
VIDEO
(TV)
AV4
ANTENNA
COMPONENT
VIDEO
(RADIO)
AM
COAXIAL
FM
PR
AV3
Y
PR
PB
SPEAKERS
PB
AV2
VIDEO
VIDEO
FRONT
CENTER
SURROUND
SURROUND BACK/BI-AMP
OPTICAL
Y
AV 1
MONITOR OUT
COMPONENT VIDEO
SINGLE
1
2
AUDIO 1
AUDIO 2
ZONE 2
AV 5
AV 6
AV OUT
ZONE OUT
CD E F
1 REMOTE IN/OUT jacks
For connecting to an infrared signal receiver/emitter that
allows you to operate the unit and other devices from another
room (p.80).
2 TRIGGER OUT jack
For connecting to a device that supports the trigger function
(p.32).
3 DC OUT jack
For connecting to an optional accessory.
4 HDMI OUT jack
For connecting to an HDMI-compatible TV and outputting
video/audio signals (p.23). When using ARC, TV audio signal
can also be input through the HDMI OUT jack.
5 ANTENNA jacks
For connecting to FM and AM antennas (p.29).
6 MONITOR OUT jacks
COMPONENT VIDEO jacks
For connecting to a TV that supports component video and
outputting video signals (p.23).
VIDEO jack
For connecting to a TV that supports composite video and
outputting video signals (p.24).
SUBWOOFER
PRE OUT
* The area around the video/audio output jacks is
marked in white on the actual product to prevent
improper connections.
G
7 HDMI 1–5 jacks
For connecting to HDMI-compatible playback devices and
inputting video/audio signals (p.25).
8 SPEAKERS terminals
For connecting to speakers (p.19).
9 NETWORK jack
For connecting to a network with a network cable (p.30).
0 WIRELESS jack
E AV OUT jacks
For outputting video/audio to a recording device (such as a
VCR) (p.31).
F ZONE2 OUT jacks
For connecting to the external amplifier used in Zone2 and
for outputting audio (p.79).
G SUBWOOFER PRE OUT 1–2 jacks
For connecting to a subwoofer with built-in amplifier (p.31).
For connecting the supplied wireless antenna (p.30).
A VOLTAGE SELECTOR
(General model only)
Selects the switch position according to your local voltage
(p.32).
B Power cable
For connecting to an AC wall outlet (p.32).
C AUDIO 1–2 jacks
For connecting to audio playback devices and inputting
audio signals (p.28).
D AV 1–6 jacks
For connecting to video/audio playback devices and
inputting video/audio signals (p.25).
FEATURES ➤
Part names and functions
En
12
Remote control
1 Remote control signal transmitter
1
Transmits infrared signals.
2 z (receiver power) key
2
Turns on/off (standby) the unit.
HDMI
1
2
3
5
3
3 Input selection keys
4
V-AUX
AV
1
2
3
4
AUDIO
5
6
TUNER
4
5
MAIN
USB
TV
7
TOP MENU
NET
MUTE
VOLUME
ON
SCREEN
F
G
RADIO
POP-UP/MENU
OPTION
9
H
I
J
ENTER
DISPLAY
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
4 MAIN/ZONE2 switch
Changes the zone (main zone or Zone2) that is controlled by
the remote control (p.81).
5 SCENE keys
Select the registered input source, sound program, and
various settings with one touch. Also, turns on the unit when
it is in standby mode (p.51).
6 PROGRAM keys
RETURN
B
C
D
E
HDMI OUT
SCENE
BD
DVD
PROGRAM
:
A
2
NET
PARTY
ZONE 2
6
8
1
Select an input source for playback.
HDMI 1–5 HDMI 1–5 jacks
V-AUX
VIDEO AUX jack (on the front panel)
AV 1–6
AV 1–6 jacks
AUDIO 1–2 AUDIO 1–2 jacks
TUNER
FM/AM radio
USB
USB jack (on the front panel)
NET
NETWORK sources (press repeatedly to select
a desired network source)
PHONO
(RX-V777 [except for U.S.A. and Canada models])
PHONO jacks
ENHANCER PURE DIRECT
K
Select a sound program (p.52).
7 External device operation keys
Displays menus for the HDMI Control-compatible playback
device (p.134).
8 ON SCREEN key
Displays the on-screen menu on the TV.
9 Menu operation keys
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
Cursor keys Select a menu or a parameter.
ENTER
Confirms a selected item.
RETURN
Returns to the previous screen.
0 MODE key
Switches the iPod operation modes (p.65).
(RX-V777 U.S.A. model)
A Radio keys
Operate the FM/AM radio when “TUNER” is selected as the
input source (p.58).
BAND
Switches between FM and AM radio.
PRESET
Select a preset station.
TUNING
Select the radio frequency.
External device operation keys
Let you perform playback operations when “USB” or “NET” is
selected as the input source, or control playback of the
HDMI Control-compatible playback device (p.134).
B Sound mode keys
Select a sound mode (p.52).
C INFO key
Selects the information displayed on the front display (p.86).
D SLEEP key
Switches the unit to standby mode automatically after a
specified period of time has elapsed (sleep timer). Press
repeatedly to set the time (120 min, 90 min, 60 min, 30 min, off).
E Numeric keys
Let you enter numerical values, such as radio frequencies.
MEMORY key
Registers FM/AM radio stations as presets (p.59).
F HDMI OUT key (RX-V777 only)
Selects HDMI OUT jacks to be used for video/audio output
(p.50).
G PARTY key (RX-V777 only)
Turns on/off the party mode (p.82).
H VOLUME keys
Adjust the volume.
I MUTE key
Mutes the audio output.
J OPTION key
Displays the option menu (p.87).
K DISPLAY key
Displays status information on the TV (p.86).
• (RX-V777 [China, Korea, U.K. and Europe models] only)
For information on the keys other than those above, refer to
“Supplement for Remote Control” on the supplied CD-ROM.
FEATURES ➤
Part names and functions
En
13
PREPARATIONS
General setup procedure
1 Placing speakers (p.15)
Select the speaker layout for the number of speakers that you are using and place them in your room.
2 Connecting speakers (p.19)
Connect the speakers to the unit.
3 Connecting a TV (p.23)
Connect a TV to the unit.
4 Connecting playback devices (p.25)
Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit.
5 Connecting the FM/AM antennas (p.29)
Connect the supplied FM/AM antennas to the unit.
6
Connecting a network cable or the
wireless antenna (p.30)
Connect the unit to a router (access point) with a network cable, or connect the supplied wireless antenna
for establishing a wireless network connection.
7 Connecting other devices (p.31)
Connect external devices, such as an external power amplifier (RX-V777 only) and recording devices.
8 Connecting the power cable (p.32)
After all the connections are complete, plug in the power cable.
9
Selecting an on-screen menu language
(p.33)
Select the desired on-screen menu language (default: English).
10
Optimizing the speaker settings
automatically (YPAO) (p.34)
Optimize the speaker settings, such as volume balance and acoustic parameters, to suit your room
(YPAO).
11
Connecting to a network device wirelessly
(p.42)
Connect the unit to a wireless router (access point) or a mobile device by establishing a wireless
connection.
This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!
PREPARATIONS
➤ General setup procedure
En
14
1 2 3 4 5 6 7 8 9 10 11
1 Placing speakers
Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the
representative speaker layout examples.
Caution
• Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6  MIN”. In this case, you can also use 4-ohm speakers as the front speakers.
For details, see “Setting the speaker impedance” (p.18).
Speaker system (the number of channels)
Speaker type
Front (L)
Abbr.
Function
1
Front (R)
2
Center
3
Surround (L)
4
Surround (R)
5
Surround back (L)
6
Surround back (R)
7
Surround back
8
Presence (L)
E
Presence (R)
R
Subwoofer
9
Produce front left/right channel sounds (stereo sounds).
Produces center channel sounds (such as movie dialogue and vocals).
Produce surround left/right channel sounds. Surround speakers also produce surround back channel
sounds when no surround back speakers are connected.
Produce surround back left/right channel sounds.
7.1+2
7.1
7.1
6.1
5.1
Front
5.1
4.1
3.1
2.1
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
*1
●
●
●
●
●
●
1
●
●
●
●
●
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
This channel is counted as “0.1”. You can connect 2 subwoofers (with built-in amplifier) to the unit.
*
●
Produces sounds mixed from surround back left/right channel sounds.
Produce CINEMA DSP effect sounds. In combination with CINEMA DSP 3D (p.53), the presence speakers
create a natural 3-dimensional sound field in your room.
●
●
●
*2
●
●
*2
●
●
●
●
●
●
●
●
●
If you use five speakers in the front side, use two of them as front surround speakers (*1) or presence speakers (*2). We recommend using them as front surround speakers for
enjoying unprocessed playback (p.56) or presence speakers for enjoying stereoscopic sound fields (p.53).
• For information on the ideal speaker layout, see “Ideal speaker layout” (p.128).
• If you have seven speakers, use two of them as surround back speakers or presence speakers.
To reinforce the rear left/right sounds, use them as surround back speakers.
To create a natural 3-dimensional sound field, use them as presence speakers.
• Two subwoofers connected to the unit output the same sounds.
PREPARATIONS
➤ Placing speakers
En
15
1 2 3 4 5 6 7 8 9 10 11
7.1+2-channel system
7.1-channel system (using surround back speakers)
E
R
1
9
1
2
3
4
5
6
7
This speaker system creates Virtual Presence Speaker (VPS) using the front, center and
surround speakers to produce a 3-dimensional sound field, and also allows you to
enjoy extended surround sounds using the surround back speakers.
6.1-channel system
R
1
4
5
6
7.1-channel system (using presence speakers)
E
3
4
7
• The surround back speakers and presence speakers do not produce sounds simultaneously. The unit
automatically changes the speakers to be used, depending on the selected CINEMA DSP (p.53).
9
9
9
2
1
2
9
3
5
2
3
4
5
8
This speaker system uses the front presence speakers to produce a natural
3-dimensional sound field, and is suited for enjoying 5.1-channel contents.
This speaker system creates Virtual Presence Speaker (VPS) using the front, center and
surround speakers to produce a 3-dimensional sound field, and also allows you to
enjoy extended surround sounds using the surround back speaker.
PREPARATIONS
➤ Placing speakers
En
16
1 2 3 4 5 6 7 8 9 10 11
5.1-channel system
Front 5.1-channel system (using presence speakers)
E
1
9
R
1
2
9
3
4
2
3
5
This speaker system creates Virtual Presence Speaker (VPS) using the front, center and
surround speakers to produce a 3-dimensional sound field, and is suited for enjoying
5.1-channel contents.
This speaker system uses the front presence speakers to produce a natural
3-dimensional sound field, and creates the virtual surround speakers using the front
speakers to allow you to enjoy multi-channel surround sound (Virtual CINEMA DSP).
Front 5.1-channel system (using surround speakers)
4.1-channel system
1
4
9
1
2
2
5
9
3
4
5
Even when surround speakers are placed in the front side, the unit creates the virtual
surround speakers in the rear side to allow you to enjoy multi-channel surround sound (Virtual
CINEMA FRONT) when “Layout (Surround)” (p.101) in the “Setup” menu is set to “Front”.
• You can enjoy surround sound even without the center speaker (front 4.1-channel system).
PREPARATIONS
➤ Placing speakers
En
17
1 2 3 4 5 6 7 8 9 10 11
■ Setting the speaker impedance
2.1-channel system
Under its default settings, the unit is configured for 8-ohm speakers. When using a
6-ohm speaker for any channel, set the speaker impedance to “6  MIN”. In this case,
you can also use 4-ohm speakers as the front speakers.
1
2
9
1
Before connecting speakers, connect the power cable to an AC wall
outlet.
2
While holding down STRAIGHT on the front panel, press
MAIN ZONE z.
MAIN ZONE z
Even when no surround speakers are connected, the unit creates the virtual surround
speakers using the front speakers to allow you to enjoy multi-channel surround sound
(Virtual CINEMA DSP).
• Add the center speaker to configure a 3.1-channel system.
STRAIGHT
3
Check that “SP IMP.” is displayed on the front display.
SPIMP.8MIN
4
5
Press STRAIGHT to select “6  MIN”.
Press MAIN ZONE z to set the unit to standby mode and remove the
power cable from the AC wall outlet.
You are now ready to connect the speakers.
PREPARATIONS
➤ Placing speakers
En
18
1 2 3 4 5 6 7 8 9 10 11
2 Connecting speakers
Connect the speakers placed in your room to the unit.
The following diagrams provide connections for 7.1+2-,
7.1-, and 6.1-channel systems as examples. For other
systems, connect speakers while referring to the
connection diagram for the 6.1-channel system.
7.1+2-channel system
7.1-channel system
(using surround back speakers)
EXTRA SP
ZONE2/F.PRESENCE
EXTRA SP
ZONE2/F.PRESENCE
Caution
The unit (rear)
• Remove the unit’s power cable from an AC wall outlet and turn
off the subwoofer before connecting the speakers.
• Ensure that the core wires of the speaker cable do not touch
one another or come into contact with the unit’s metal parts.
Doing so may damage the unit or the speakers. If the speaker
cables short circuit, “Check SP Wires” will appear on the front
display when the unit is turned on.
The unit (rear)
SPEAKERS
FRONT
CENTER
SPEAKERS
SURROUND
FRONT
SURROUND BACK/BI-AMP
CENTER
CENTER
SURROUND
SURROUND BACK/BI-AMP
CENTER
SINGLE
1
SINGLE
1
2
2
SUBWOOFER
SUBWOOFER
• The illustrations of the unit (rear) used in this section are of the
RX-V777.
Cables required for connection
(commercially available)
Speaker cables (x the number of speakers)
+
–
E
R
+
–
1
2
1
2
Audio pin cable (two for connecting two subwoofers)
9
3
9
4
5
6
7
9
3
4
5
6
7
PREPARATIONS ➤ Connecting speakers
En
19
1 2 3 4 5 6 7 8 9 10 11
7.1-channel system
(using presence speakers)
■ Connecting speaker cables
6.1-channel system
EXTRA SP
ZONE2/F.PRESENCE
EXTRA SP
ZONE2/F.PRESENCE
The unit (rear)
CENTER
a Remove approximately 10 mm (3/8”) of insulation from
the ends of the speaker cable and twist the bare wires of
the cable firmly together.
The unit (rear)
SPEAKERS
FRONT
Speaker cables have two wires. One is for connecting
the negative (-) terminal of the unit and the speaker, and
the other is for the positive (+) terminal. If the wires are
colored to prevent confusion, connect the black wire to
the negative and the other wire to the positive terminal.
SPEAKERS
SURROUND
FRONT
SURROUND BACK/BI-AMP
CENTER
CENTER
SURROUND
SURROUND BACK/BI-AMP
CENTER
SINGLE
1
SINGLE
1
b Loosen the speaker terminal.
c Insert the bare wires of the cable into the gap on the side
(upper right or bottom left) of the terminal.
2
2
SUBWOOFER
SUBWOOFER
d Tighten the terminal.
+ (red)
b
c
FR
ON
T
d
E
R
1
a
- (black)
2
1
2
Using a banana plug
(U.S.A., Canada, China, Australia and General models only)
9
3
9
a Tighten the speaker terminal.
3
b Insert a banana plug into the end of the terminal.
4
5
4
5
8
Banana plug
a
FR
ON
T
b
When using only one surround back speaker, connect it
to the SINGLE jack (L side).
PREPARATIONS ➤ Connecting speakers
En
20
1 2 3 4 5 6 7 8 9 10 11
Push-type speaker terminals
(RX-V677 only)
a Remove approximately 10 mm (3/8”) of insulation from
the ends of the speaker cable, and twist the bare wires of
the cable firmly together.
b Press down the tab.
c Insert the bare wires of the cable into the hole in the
terminal.
d Release the tab.
a
Connecting front speakers that
support bi-amp connections
When using front speakers that support bi-amp
connections, connect them to the FRONT jacks and
SURROUND BACK/BI-AMP jacks.
To enable the bi-amp function, set “Power Amp Assign”
(p.100) in the “Setup” menu to “5ch BI-AMP” after
connecting the power cable to an AC wall outlet.
Caution
• Before making bi-amp connections, remove any brackets or
cables that connect a woofer with a tweeter. Refer to the
instruction manual of the speakers for details. If you are not
making bi-amp connections, make sure that the brackets or
cables are connected before connecting the speaker cables.
• Surround back speakers cannot be used during bi-amp
connections.
EXTRA SP
ZONE2/F.PRESENCE
ZO EXT
NE RA
2/F SP
.PR
ES
E
NC
E
d
b
c
+ (red)
The unit (rear)
SPEAKERS
FRONT
- (black)
CENTER
SURROUND
SURROUND BACK/BI-AMP
CENTER
SINGLE
1
■ Connecting the subwoofer
2
SUBWOOFER
Use an audio pin cable to connect the subwoofer.
Audio pin cable
1
2
3
9
4
5
• The FRONT jacks and SURROUND BACK/BI-AMP jacks output the
same signals.
PREPARATIONS ➤ Connecting speakers
En
21
Input/output jacks and cables
■ Video/audio jacks
■ Video jacks
■ Audio jacks
❑ HDMI jacks
❑ COMPONENT VIDEO jacks
❑ OPTICAL jacks
Transmit digital video and digital sound through a single
jack. Use an HDMI cable.
Transmit video signals separated into three
components: luminance (Y), chrominance blue (PB),
and chrominance red (PR). Use a component video
cable with three plugs.
Transmit digital audio signals. Use a digital optical
cable. Remove the tip protector (if available) before
using the cable.
HDMI cable
Digital optical cable
Component video cable
OPTICAL
❑ COAXIAL jacks
• Use a 19-pin HDMI cable with the HDMI logo. We recommend using
a cable less than 5.0 m (16.4 ft) long to prevent signal quality
degradation.
Transmit digital audio signals. Use a digital coaxial
cable.
Digital coaxial cable
T
TOR OU
• The unit’s HDMI jacks support the HDMI Control, Audio Return
Channel (ARC), and 3D and 4K Ultra HD video transmission
features.
❑ VIDEO jacks
• Use high speed HDMI cables to enjoy 3D or 4K Ultra HD videos.
Transmit analog video signals. Use a video pin cable.
❑ HDMI/MHL jack
Transmits digital video and digital sound. Use an MHL
or HDMI cable.
COAXIAL
Video pin cable
❑ AUDIO jacks
Transmit analog stereo audio signals. Use a stereo pin
cable (RCA cable).
Stereo pin cable
MHL or HDMI cable
• The VIDEO AUX jack on the front panel of the unit supports both
MHL and HDMI connections. Use a cable that matches the jack on
your MHL-compatible mobile device. For details on an MHL
connection, see “MHL connection” (p.29). When connecting an
HDMI-compatible playback device to the VIDEO AUX jack, use an
HDMI cable.
PREPARATIONS ➤
Input/output jacks and cables
En
22
1 2 3 4 5 6 7 8 9 10 11
3 Connecting a TV
Connect a TV to the unit so that video input to the unit can be output to the TV.
You can also enjoy playback of TV audio on the unit.
To maximize the performance of the unit, we recommend connecting a TV with an HDMI
cable.
■ HDMI connection
■ Component/composite video connection
When connecting any video device with a component video cable, connect the TV to
the MONITOR OUT (COMPONENT VIDEO) jacks.
When connecting any video device with a video pin cable, connect the TV to the
MONITOR OUT (VIDEO) jack.
Connect the TV to the unit with an HDMI cable and a digital optical cable.
• If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be
output to the TV.
• (RX-V777 only)
You can connect another TV or a projector by using the HDMI OUT 2 jack (p.24).
• Operations with TV screen are available only when your TV is connected to the unit via HDMI.
HDMI OUT jack
The unit (rear)
• If you will receive TV broadcasts only from the set-top box, you do not need to make an audio cable
connection between the TV and the unit.
HDMI OUT
2
TRIGGER OUT
12V 0.1A
HDMI input
1
ARC
DC OUT
5V 0.5A
HDMI 1
HDMI OUT
HDMI 2
HDMI
(BD/DVD)
IN
2
1
HDMI
ARC
OUT
❑ COMPONENT VIDEO connection (with a component video cable)
REMOTE
OPTICAL
VIDEO
(TV)
AV4
MONITOR OUT
(COMPONENT VIDEO)
jacks
HDMI
ANTENNA
(RADIO)
AM
COAXIAL
FM
AV3
Y
AV 4 (OPTICAL) jack
PR
PB
OPTICAL
AV2
OPTICAL
AV 1
O
(TV)
AV4
COMPONENT
VIDEO
MO
COMPONENT VIDEO
OPTICAL
AUDIO 2
PR
The unit (rear)
ZONE
AV 5
AV 6
AV OUT
COMPONENT
VIDEO
PR
O
AUDIO 1
Video input
(component video)
VIDE
VIDEO
PB
ZONE O
TV
Audio output
(digital optical)
TRIGGER OUT
12V 0.1A
PR
PB
Y
DC OUT
5V 0.5A
HDMI 1
HDMI OUT
HDMI 2
PR
HDMI 3
(BD/DVD)
PB
IN
2
Y
1
ARC
OUT
PB
TOR OUT
REMOTE
OPTICAL
Y
VIDEO
(TV)
AV4
ANTENNA
Y
COMPONENT
VIDEO
(RADIO)
AM
COAXIAL
FM
PR
AV3
Y
PR
PB
PB
OPTICAL
AV2
• You do not make a digital optical cable connection between the TV and the unit in the following cases:
OPTICAL
AV 1
VIDEO
VIDEO
O
(TV)
AV4
Y
MONITOR OUT
COMPONENT VIDEO
– If your TV supports Audio Return Channel (ARC)
OPTICAL
– If you will receive TV broadcasts only from the set-top box
• If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s
power and volume with the TV’s remote control.
To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For
details on the settings, see “Information on HDMI” (p.134).
O
AUDIO 1
AUDIO 2
ZONE 2
AV 5
AV 6
AV OUT
FRONT
SU
ZONE OUT
AV 4 (OPTICAL) jack
Audio output
(digital optical)
TV
About Audio Return Channel (ARC)
• ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a
single HDMI cable, you can output video/audio to the TV or input TV audio to the unit.
• When using ARC, connect a TV with an HDMI cable that supports ARC.
PREPARATIONS ➤ Connecting a TV
En
23
1 2 3 4 5 6 7 8 9 10 11
❑ VIDEO (composite video) connection (with a video pin cable)
MONITOR OUT
(VIDEO) jack
The unit (rear)
Video input
(composite video)
TRIGGER OUT
12V 0.1A
DC OUT
5V 0.5A
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
(BD/DVD)
IN
2
1
VIDEO
ARC
OUT
VIDEO
REMOTE
OPTICAL
VIDEO
(TV)
AV4
ANTENNA
COMPONENT
VIDEO
(RADIO)
AM
COAXIAL
V
V
FM
MONITOR
PR
AV3
Y
PR
PB
PB
OPTICAL
AV2
VIDEO
VIDEO
OPTICAL
O
(TV)
AV4
AV 1
Y
MONITOR OUT
COMPONENT VIDEO
OPTICAL
O
AUDIO 1
ZONE 2
AUDIO 2
AV 5
AV 6
AV OUT
FRONT
SU
ZONE OUT
AV 4 (OPTICAL) jack
TV
Audio output
(digital optical)
■ Connecting another TV or a projector
(RX-V777 only)
The unit has two HDMI output jacks. If you connect another TV or a projector to the unit
with an HDMI cable, you can switch the TV (or projector) to be used for watching
videos with the remote control (p.50).
HDMI OUT 2 jack
TV
The unit (rear)
HDMI OUT
TRIGGER OUT
12V 0.1A
2
DC OUT
5V 0.5A
HDMI 1
HDMI OUT
1
HDMI 2
ARC
(BD/DVD)
IN
2
1
ARC
OUT
REMOTE
OPTICAL
VIDEO
ANTENNA
(RADIO)
AM
HDMI
(TV)
AV4
COAXIAL
FM
AV3
Y
TV (already connected)
AV2
VIDE
VIDEO
OPTICAL
AV 1
HDMI
PR
PB
MO
COMPONENT VIDEO
AUDIO 1
HDMI input
HDMI
AUDIO 2
ZONE
AV 5
AV 6
AV OUT
ZONE O
Projector
• HDMI Control is not available on the HDMI OUT 2 jack.
PREPARATIONS ➤ Connecting a TV
En
24
1 2 3 4 5 6 7 8 9 10 11
4 Connecting playback devices
The unit is equipped with a variety of input jacks including HDMI input jacks to allow
you to connect different types of playback devices. For information on how to connect
an iPod or a USB storage device, see the following pages.
– Connecting an iPod (p.63)
■ Component video connection
Connect a video device to the unit with a component video cable and an audio cable
(digital optical or digital coaxial). Choose a set of input jacks (on the unit) depending on
the audio output jacks available on your video device.
– Connecting a USB storage device (p.66)
Output jacks on video device
Connecting video devices (such as BD/DVD players)
Input jacks on the unit
Video
Connect video devices such as BD/DVD players, set-top boxes (STBs) and game
consoles to the unit. Depending on the video/audio output jacks available on your video
device, choose one of the following connections. We recommend using an HDMI
connection if the video device has an HDMI output jack.
• If the combination of video/audio input jacks available on the unit does not match your video device, change
its combination according to the output jacks of your device (p.26).
The unit
(rear)
Y
2
HDMI 2
1
PB
PR
Y
PB
ARC
OPTICAL
VIDEO
COMPONENT VIDEO
Y
ANTENNA
(RADIO)
AM
COAXIAL
PB
Y
FM
AV3
Y
HDMI 3
PR
(BD/DVD)
REMOTE
(TV)
AV4
HDMI 2
COMPONENT
VIDEO
PR
HDMI 1
HDMI OUT
OUT
HDMI 1
(BD/DVD)
Video output
(component video)
PR
PB
DC OUT
5V 0.5A
HDMI 1–5 jacks
AV 1 (COMPONENT VIDEO + OPTICAL)
AV 2 (COMPONENT VIDEO + COAXIAL)
AV 1–2
(COMPONENT VIDEO)
jacks
IN
Connect a video device to the unit with an HDMI cable.
Digital optical
Digital coaxial
Component video
TRIGGER OUT
12V 0.1A
■ HDMI connection
Audio
HDMI 4
HDMI 5
PR
PB
AV2
VIDE
VIDEO
OPTICAL
AV 1
MO
COMPONENT VIDEO
The unit (rear)
C
C
AV2
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
HDMI 4
HDMI 5
AUDIO 1
AUDIO 2
HDMI output
1
HDMI
ARC
AV 6
AV OUT
O
AV 1
ANTENNA
HDMI
COMPONENT
VIDEO
(RADIO)
AM
COAXIAL
ZONE
AV 5
ZONE
Video device
OPTICAL
(BD/DVD)
FM
PR
HDMI
PR
SPEAKERS
AV 1 (OPTICAL) jack or
AV 2 (COAXIAL) jack
O
OPTICAL
Audio output
(digital optical or digital coaxial)
PB
VIDEO
VIDEO
FRONT
CENTER
If you select the input source by pressing AV 1–2, the video/audio played back on the
video device will be output from the unit.
CENTER
Y
MONITOR OUT
T VIDEO
SINGLE
1
2
O1
AUDIO 2
ZONE 2
AV 5
AV 6
AV OUT
ZONE OUT
FRONT
SURROUND
SUR. BACK
PRE OUT
SUBWOOFER
Video device
If you select the input source by pressing HDMI 1–5, the video/audio played back on
the video device will be output from the unit.
• The component video signals (other than 480i/576i signals) input to AV 1–2 jacks of the unit can be output
from the MONITOR OUT (COMPONENT VIDEO) jacks only. To watch those videos, you need to connect
your TV to the MONITOR OUT (COMPONENT VIDEO) jacks of the unit (p.23). For details, refer to “Video
signal flow” (p.133).
• To watch videos input to the HDMI 1–5 jacks, you need to connect your TV to the HDMI OUT jack of the
unit (p.23).
PREPARATIONS ➤ Connecting playback devices
En
25
1 2 3 4 5 6 7 8 9 10 11
■ Composite video connection
■ Changing the combination of video/audio input jacks
Connect a video device to the unit with a video pin cable and an audio cable (digital
coaxial, digital optical, or stereo pin cable). Choose a set of input jacks (on the unit)
depending on the audio output jacks available on your video device.
If the combination of video/audio input jacks available on the unit does not match your
video device, change its combination according to the output jacks of your device. You
can connect a video device that has the following video/audio output jacks.
Output jacks on video device
Output jacks on video device
Input jacks on the unit
Input jacks on the unit
Video
Audio
Composite video
Video
Digital coaxial
AV 3 (VIDEO + COAXIAL)
Digital optical
AV 4 (VIDEO + OPTICAL)
Analog stereo
AV 5–6 (VIDEO + AUDIO)
HDMI
Audio
Video
Audio
Digital optical
HDMI 1–5
AV 1 (OPTICAL)
AV 4 (OPTICAL)
Digital coaxial
HDMI 1–5
AV 2–3 (COAXIAL)
Analog stereo
HDMI 1–5
AV 5–6 (AUDIO)
AUDIO 1–2
Analog stereo
AV 1–2
(COMPONENT
VIDEO)
AV 5–6 (AUDIO)
AUDIO 1–2
Video output
(composite video)
Component video
VIDEO
AV 3–6 (VIDEO)
jack
V
❑ Necessary setting
TRIGGER OUT
12V 0.1A
DC OUT
5V 0.5A
VIDEO
HDMI 1
HDMI OUT
(BD/DVD)
IN
2
1
V
ARC
OUT
REMOTE
OPTICAL
VIDEO
(TV)
AV4
AN
Video device
(R
AM
COAXIAL
For example, if you have connected a video device to AV 2 (COMPONENT VIDEO) and
AV 5 (AUDIO) jacks of the unit, change the combination setting as follows.
AV3
Y
OPTICAL
PR
PB
AV2
O
VIDEO
Video output
(component video)
O
OPTICAL
OPTICAL
AV 1
COMPONENT VIDEO
COAXIAL
C
C
COAXIAL
AUDIO 1
AUDIO 2
AV 5
AV 6
L
A
L
COMPONENT
VIDEO
The unit (rear)
AV 2 (COMPONENT VIDEO)
jacks
TRIGGER OUT
12V 0.1A
L
DC OUT
5V 0.5A
HDMI 1
HDMI OUT
(BD/DVD)
PR
IN
R
The unit (rear)
R
R
2
1
ARC
OUT
Y
PR
PB
REMOTE
OPTICAL
VIDEO
(TV)
AV4
AV2
Any of AV 3 (COAXIAL) jack,
AV 4 (OPTICAL) jack,
AV 5–6 (AUDIO) jacks
Audio output
(either digital optical,
digital coaxial, or analog stereo)
(RADIO
AM
COAXIAL
PR
PB
PB
Y
Y
PB
Y
AV3
Y
PR
PB
AV2
VIDEO
OPTICAL
AV 1
If you select the input source by pressing AV 3–6, the video/audio played back on the
video device will be output from the unit.
PR
ANTEN
AUDIO
COMPONENT VIDEO
L
L
L
AUDIO 1
AUDIO 2
AV 5
AV 6
AV OU
R
R
Video device
R
AV 5
• To watch videos input to the AV 3–6 (VIDEO) jacks, you need to connect your TV to the HDMI OUT jack
(p.23) or to the MONITOR OUT (VIDEO) jack (p.24) of the unit. For details, refer to “Video signal flow”
(p.133).
AV 5 (AUDIO) jacks
Audio output
(analog stereo)
PREPARATIONS ➤ Connecting playback devices
En
26
1 2 3 4 5 6 7 8 9 10 11
• The following operation is available only when your TV is connected to the unit via HDMI.
1
After connecting external devices (such as a TV and playback
devices) and power cable of the unit, turn on the unit.
2
Press AV 2 to select “AV 2” (video input jack to be used) as the input
source.
5
6
7
Use the cursor keys to select “Audio In” and press ENTER.
8
Press ON SCREEN.
Use the cursor keys to select “AV5” (audio input jack to be used).
V-AUX
AV
1
2
3
5
6
1
USB
NET
N
4
AV 2
AUDIO
TUNER
TOP MENU
2
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
3
4
5
DISPLAY
ON SCREEN
Cursor keys
ENTER
This completes the necessary settings.
If you select “AV 2” as the input source by pressing AV 2, the video/audio played back
on the video device will be output from the unit.
Press ON SCREEN.
Use the cursor keys to select “Input” and press ENTER.
Use the cursor keys (e/r) to select “AV2” (video input jack to be
used) and press the cursor key (q).
PREPARATIONS ➤ Connecting playback devices
En
27
1 2 3 4 5 6 7 8 9 10 11
Connecting audio devices (such as CD players)
Connecting to the jacks on the front panel
Connect audio devices such as CD players, MD players, and a turntable to the unit.
Depending on the audio output jacks available on your audio device, choose one of the
following connections.
Use the VIDEO AUX jack to temporarily connect a playback device to the unit.
Audio output jacks on audio device
Audio output jacks on the unit
Digital optical
AV 1 (OPTICAL)
AV 4 (OPTICAL)
Digital coaxial
AV 2–3 (COAXIAL)
Analog stereo
AV 5–6 (AUDIO)
AUDIO 1–2
Turntable (PHONO)
PHONO*
Audio output
(either digital optical,
digital coaxial, or analog stereo)
AV 1–6 jacks
AUDIO 1–2 jacks
TRIGGER OUT
12V 0.1A
Before making a connection, stop playback on the device and turn down the volume on
the unit.
❑ HDMI connection
Connect an HDMI-compatible device (such as game consoles and camcorders) to the
unit with an HDMI cable.
BD
DVD
PHONES
* RX-V777 only (except for U.S.A. and Canada models)
The unit
(rear)
Use the USB jack to connect an iPod or a USB storage device. For details, see
“Connecting an iPod” (p.63) or “Connecting a USB storage device” (p.66).
YPAO MIC
SILENT CINEMA
TONE CONTROL
TV
NET
PROGRAM
RADIO
STRAIGHT
VIDEO AUX
HDMI/
MHL 5V 1A
VIDEO
5V
2.1A
HDMI
The unit (front)
O
DC OUT
5V 0.5A
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
(BD/DVD)
OPTICAL
IN
2
1
ARC
OUT
C
REMOTE
OPTICAL
VIDEO
OPTICAL
(TV)
AV4
O
ANTENNA
COAXIAL
COMPONENT
VIDEO
(RADIO)
AM
COAXIAL
FM
L
PR
AV3
Y
PR
PB
COAXIAL
AV2
C
VIDEO
OPTICAL
VIDEO
MONITOR OUT
COMPONENT VIDEO
L
AUDIO 1
Game console
R
Y
AV 1
Audio device
L
PB
AUDIO 2
ZONE 2
AV 5
AV 6
AV OUT
FRONT
ZONE OUT
SURROUND
PR
R
R
PHONO
L
L
L
R
R
GND
Camcorder
R
GND
PHONO
PHONO jacks*
Ground lead
Turntable
Audio output (PHONO)
If you select the input source by pressing AV 1–6, AUDIO 1–2 or PHONO*, the audio
played back on the audio device will be output from the unit.
When connecting a turntable
If you select “V-AUX” as the input source by pressing V-AUX, the video/audio played
back on the device will be output from the unit.
• To watch videos input to the VIDEO AUX (HDMI IN) jack, you need to connect your TV to the HDMI OUT
jack of the unit (p.23).
• You need to prepare an HDMI cable that match the output jacks on your device.
(RX-V777 only [except for U.S.A. and Canada models])
• The PHONO jack of the unit is compatible with an MM cartridge. To connect a turntable with a
low-output MC cartridge, use a boosting transformer.
• Connecting the turntable to the GND terminal of the unit may reduce noise in the signal.
• When “USB” is selected as the input source, video signals input to the VIDEO jack are output from the
HDMI OUT and MONITOR OUT (VIDEO) jacks.
PREPARATIONS ➤ Connecting playback devices
En
28
1 2 3 4 5 6 7 8 9 10 11
❑ MHL connection
Connect an MHL-compatible mobile device (such as smartphones) to the unit with an
MHL cable. You can enjoy full HD videos and multichannel audio sources stored on the
mobile device. The VIDEO AUX jack of the unit enables you to input videos and audio
directly from the mobile device to the unit.
5 Connecting the FM/AM antennas
Connect the supplied FM/AM antennas to the unit.
Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface.
FM antenna
BD
DVD
YPAO MIC
PHONES
TONE CONTROL
TV
AM antenna
RADIO
NET
STRAIGHT
PROGRAM
SILENT CINEMA
VIDEO AUX
HDMI/
MHL 5V 1A
VIDEO
5V
2.1A
MHL
The unit (front)
The unit (rear)
TRIGGER OUT
12V 0.1A
DC OUT
5V 0.5A
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
HDMI 4
HDMI 5
NETWORK
(BD/DVD)
(NET)
IN
2
1
ARC
OUT
REMOTE
OPTICAL
VIDEO
(TV)
AV4
MHL output
ANTENNA
COMPONENT
VIDEO
(RADIO)
AM
COAXIAL
FM
PR
AV3
Y
PB
PR
SPEAKERS
PB
AV2
VIDEO
VIDEO
FRONT
OPTICAL
AV 1
Mobile device
CENTER
SURROUND
CENTER
Y
MHL
COMPONENT VIDEO
MONITOR OUT
Assembling and connecting the AM antenna
If you select “V-AUX” as the input source by pressing V-AUX, the video/audio played
back on the mobile device will be output from the unit.
• To watch videos input to the VIDEO AUX jack, you need to connect your TV to the HDMI OUT jack of the
unit (p.23).
• You need to prepare an MHL cable that match the jack on your mobile device.
• You can operate the mobile device using the menu operation keys, external device operation keys and
numeric keys on the remote control. However, some features may not be compatible, depending on the
mobile device or its application. In this case, operate the mobile device itself.
Hold down
Insert
Release
• If “Standby Through” (p.107) in the “Setup” menu is set to “On”, you can output mobile device videos/audio
to the TV or operate the mobile device using the remote control of the unit even when the unit is in standby
mode.
• The unit supplies power to the mobile device in the following conditions.
– The unit is turned on.
– The unit is in standby mode while “Standby Through” (p.107) in the “Setup” menu is set to “On”.
• Unwind only the length of cable needed from the AM antenna unit.
• The wires of the AM antenna have no polarity.
PREPARATIONS ➤ Connecting the FM/AM antennas
En
29
1 2 3 4 5 6 7 8 9 10 11
6 Connecting a network cable or the wireless antenna
Connect the unit to a router (access point) with a network cable, or connect the
supplied wireless antenna for establishing a wireless network connection.
Connecting the wireless antenna
You can enjoy Internet radio or music files stored on media servers, such as PCs and
Network Attached Storage (NAS), on the unit.
Connect the supplied wireless antenna to the unit for establishing a wireless network
connection.
For information on how to connect the unit to a network device wirelessly, see
“Connecting to a network device wirelessly” (p.42).
Connecting the network cable
Connect the unit to your router with a commercially-available STP network cable (CAT-5
or higher straight cable).
Internet
Network Attached Storage
(NAS)
WAN
b
ESS
WIREL
LAN
a
Modem
PC
Network cable
a Rotate the antenna clockwise.
The unit (rear)
Router
b Stand the antenna up straight.
WIRELESS
NETWORK
(NET)
EXTRA SP
ZONE2/F.PRESENCE
Mobile device
(such as iPod touch
and iPhone)
• Do not connect the antenna other than the supplied one.
• Do not apply excessive force on the antenna. Doing so may damage it.
• When packing the unit, remove the antenna to prevent damage.
SPEAKERS
• If you are using a router that supports DHCP, you do not need to configure any network settings for the unit,
as the network parameters (such as the IP address) will be assigned automatically to it. You only need to
configure the network settings if your router does not support DHCP or if you want to configure the network
parameters manually (p.107).
• You can check whether the network parameters (such as IP address) are properly assigned to the unit in
“Network” (p.115) in the “Information” menu.
• Some security software installed on your PC or the firewall settings of network devices (such as a router)
may block the access of the unit to the network devices or the Internet. In these cases, configure the
security software or firewall settings appropriately.
• Each server must be connected to the same subnet as the unit.
• To use the service via the Internet, broadband connection is strongly recommended.
PREPARATIONS ➤ Connecting a network cable or the wireless antenna
En
30
1 2 3 4 5 6 7 8 9 10 11
7 Connecting other devices
Connecting an external power amplifier
4 SUBWOOFER1–2 jacks
For connecting a subwoofer with built-in amplifier. When 2 subwoofers are connected, the same
sound is output from them.
(RX-V777 only)
When connecting an external power amplifier (pre-main amplifier) to enhance speaker
output, connect the input jacks of the power amplifier to the PRE OUT jacks of the unit.
The same channel signals are output from the PRE OUT jacks as from their
corresponding SPEAKERS terminals.
Caution
• To prevent the generation of loud noises or abnormal sounds, make sure the followings before making
connections.
5 CENTER jack
Outputs center channel sounds.
Connecting recording devices
You can connect video/audio recording devices to the AV OUT jacks. These jacks
output analog video/audio signals selected as the input.
– Remove the power cable of the unit and turn off the external power amplifier before connecting them.
– When using the PRE OUT jacks, do not connect speakers to the corresponding SPEAKERS
terminals.
– When using an external amplifier that does not have the volume control bypass, do not connect other
devices (except the unit) to the amplifier.
• To copy video/audio from a video device, connect the video device to the AV 5–6 jacks of the unit.
• To copy audio from an audio device, connect the audio device to the AV 5–6 jacks or AUDIO 1–2 jacks of
the unit.
• Be sure to use the AV OUT jacks only for connecting recording devices.
Video/audio input
The unit (rear)
AV OUT jacks
The unit (rear)
VIDEO
WIRELESS
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
NETWORK
(BD/DVD)
(NET)
EXTRA SP
ZONE2/F.PRESENCE
DC OUT
5V 0.5A
HDMI 1
HDMI OUT
2
HDMI 2
HDMI 3
V
HDMI 4
V
(BD/DVD)
1
ARC
L
ANTENNA
COMPONENT
VIDEO
(RADIO)
AM
VIDEO
CAL
FM
(TV)
AV4
PR
ANTENNA
AM
XIAL
L
L
R
R
COMPONENT
VIDEO
(RADIO)
FM
R
PR
SPEAKERS
PB
Video recording
device
AV3
VIDEO
FRONT
CENTER
SURROUND
Y
SURROUND BACK/BI-AMP
PR
PB
CENTER
PB
Y
AV2
VIDEO
VIDEO
CAL
MONITOR OUT
SINGLE
1
CENT
AUDIO
AV OUT
Y
SINGLE
AV 1
MONITOR OUT
COMPONENT VIDEO
SINGLE
1
2
ZONE 2
AV 6
AV OUT
ZONE OUT
FRONT
SURROUND
SUR. BACK
PRE OUT
2
SUBWOOFER
AUDIO 1
AUDIO 2
ZONE 2
AV 5
AV 6
AV OUT
ZONE OUT
FRONT
SURROUND
SUR. BACK
PRE OUT
SUBWO
12 345
1 FRONT jacks
Output front channel sounds.
2 SURROUND jacks
L
L
R
R
Audio recording
device
AUDIO
Output surround channel sounds.
3 SUR. BACK jacks
Audio input
Output surround back channel sounds. When using only one external amplifier for the surround
back channel, connect it to the SINGLE jack (L side).
PREPARATIONS ➤ Connecting other devices
En
31
1 2 3 4 5 6 7 8 9 10 11
Connecting a device compatible with the trigger function
The trigger function can control an external device in conjunction with operating the
unit (such as powering on/off and input selection). If you have a Yamaha subwoofer that
supports a system connection or a device with a trigger input jack, you can use the
trigger function by connecting the external device to the TRIGGER OUT jack.
8 Connecting the power cable
Before connecting the power cable (General model only)
Set the switch position of VOLTAGE SELECTOR according to your local voltage.
Voltages are AC 110–120/220–240 V, 50/60 Hz.
TRIGGER OUT jack
TRIGGER OUT
12V 0.1A
TRIGGER OUT
12V 0.1A
DC OUT
5V 0.5A
HDMI 1
HDMI OUT
HD
(BD/DVD)
IN
2
1
ARC
OUT
REMOTE
OPTICAL
System
connection
input
• Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC
wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a
potential fire hazard.
VIDEO
(TV)
AV4
ANTENNA
VOLTAGE SELECTOR
(RADIO)
AM
COAXIAL
AV3
Y
The unit (rear)
PR
PB
VOLTAGE SELECTOR
WIRELESS
AV2
VIDEO
OPTICAL
AV 1
220V240V
COMPONENT VIDEO
EXTRA SP
ZONE2/F.PRESENCE
110V120V
AUDIO 1
AUDIO 2
AV 5
AV 6
AV OUT
Yamaha subwoofer that
supports a system connection
UND
The unit (rear)
SURROUND BACK/BI-AMP
SINGLE
• You can configure the trigger function settings in “Trigger Output” (p.111) in the “Setup” menu.
After all the connections are complete, plug in the power cable.
The unit (rear)
WIRELESS
To an AC wall outlet
NETWORK
(NET)
EXTRA SP
ZONE2/F.PRESENCE
SPEAKERS
CENTER
SURROUND
SURROUND BACK/BI-AMP
SINGLE
PREPARATIONS ➤ Connecting the power cable
En
32
1 2 3 4 5 6 7 8 9 10 11
z
9 Selecting an on-screen menu language
HDMI
1
2
3
4
5
Select the desired on-screen menu language from English
(default), Japanese, French, German, Spanish, Russian, Italian and
Chinese.
V-AUX
AV
1
2
3
4
AUDIO
5
6
1
TUNER
USB
NET
MAIN
PARTY
ZONE 2
2
HDMI OUT
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
POP-UP/MENU
ON
SCREEN
ON SCREEN
1
2
Press z (receiver power) to turn on the unit.
3
4
Press ON SCREEN.
5
Use the cursor keys (e/r) to select “Language” and
the cursor keys (q/w) to select the desired
language.
OPTION
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
6
7
To confirm the setting, press ENTER.
To exit from the menu, press ON SCREEN.
• The information on the front display is provided in English only.
Use the cursor keys to select “Setup” and press
ENTER.
Cursor keys
ENTER
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
5
6
7
8
9
0
MEMORY
ENT
ENHANCER PURE DIRECT
4
PREPARATIONS ➤ Selecting an on-screen menu language
En
33
1 2 3 4 5 6 7 8 9 10 11
z
10 Optimizing the speaker settings automatically (YPAO)
HDMI
1
2
3
4
5
V-AUX
AV
1
2
3
4
AUDIO
5
6
1
TUNER
USB
NET
MAIN
PARTY
ZONE 2
2
The Yamaha Parametric room Acoustic Optimizer (YPAO) function
detects speaker connections, measures the distances from them to
your listening position(s), and then automatically optimizes the
speaker settings, such as volume balance and acoustic
parameters, to suit your room.
4
HDMI OUT
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
• The YPAO function of the unit adopts the YPAO-R.S.C. (Reflected Sound Control)
technology that enables to create natural sound fields like a room specifically
designed for acoustic perfection.
POP-UP/MENU
OPTION
• Place the YPAO microphone at your listening position (same height as your
ears). We recommend the use of a tripod as a microphone stand. You can
use the tripod screws to stabilize the microphone.
YPAO MIC
jack
VOLUME
ON
SCREEN
Place the YPAO microphone at your listening
position and connect it to the YPAO MIC jack on the
front panel.
The unit (front)
YPAO MIC
• Note the following regarding YPAO measurement.
– Test tones are output at high volume and may surprise or frighten small children.
– Test tone volume cannot be adjusted.
ENTER
– Keep the room as quiet as possible
RETURN
DISPLAY
BAND
MODE
TUNING
MUSIC
ENHANCER PURE DIRECT
INFO
1
2
– Do not connect headphones.
PRESET
SUR. DECODE STRAIGHT
MOVIE
– Stay in a corner of the room behind the listening position so that you do not
become an obstacle between speakers and the YPAO microphone.
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
1
2
3
Press z (receiver power) to turn on the unit.
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
Turn on the subwoofer and set the volume to half. If
the crossover frequency is adjustable, set it to
maximum.
VOLUME
MIN
MAX
CROSSOVER/
HIGH CUT
MIN
9
4
3
YPAO
5
microphone
Ear height
9
MAX
• If you are using bi-amp connection or Zone2 speakers, set “Power Amp
Assign” (p.100) in the “Setup” menu to the appropriate setting before
starting YPAO.
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
34
1 2 3 4 5 6 7 8 9 10 11
(RX-V677)
2
5
The following screen appears on the TV.
HDMI
1
3
4
5
(RX-V777 only) If desired, change the measuring
method (multi/single).
a Use the cursor keys to select “Multi Position” and press ENTER.
V-AUX
AV
1
2
3
5
6
1
b Use the cursor keys to select a setting and then press ENTER.
4
AUDIO
TUNER
MAIN
USB
2
NET
PARTY
ZONE 2
HDMI OUT
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
This completes the preparations.
VOLUME
See “Measuring at one listening position (single measure)”
(p.36) to start the measurement.
POP-UP/MENU
ON
SCREEN
Settings
OPTION
(RX-V777)
ENTER
RETURN
DISPLAY
Cursor keys
ENTER
RETURN
Yes
Select this option if you will have several listening
positions or if you want others to enjoy surround sound.
You can take measurements at up to 8 different
positions in the room. The speaker settings will be
optimized to suit the area defined by those positions
(multi measure).
No (default)
Select this option if your listening position will always be
fixed. Take the measurements at only one position. The
speaker settings will be optimized to suit that position
(single measure).
The following screen appears on the TV.
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
ENHANCER PURE DIRECT
1
2
3
5
6
7
4
8
9
0
MEMORY
ENT
• If you perform the multi measure, the speaker settings will be optimized for you to
enjoy surround sound in a wider space.
Proceed to Step 5.
• If you perform the multi measure, first place the YPAO microphone at the listening
position you will be seated most frequently.
• To cancel the operation, disconnect the YPAO microphone before starting
the measurement.
• To configure the power amplifier assignment setting, press RETURN and
select “Manual Setup” (p.100).
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
35
1 2 3 4 5 6 7 8 9 10 11
Single measure
Multi measure
(5 listening positions)
HDMI
1
2
3
4
5
Follow the procedure below for measurement. It takes about
3 minutes to perform the measurement.
V-AUX
AV
1
2
3
Measuring at one listening position
(single measure)
4
AUDIO
5
6
1
TUNER
USB
NET
MAIN
PARTY
ZONE 2
2
1
HDMI OUT
a
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
d
e
To start the measurement, use the cursor keys to
select “Measure” and press ENTER.
The measurement will start in 10 seconds. Press ENTER
again to start the measurement immediately.
bac
RADIO
VOLUME
• To cancel the measurement temporarily, press RETURN.
TOP MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
The following screen appears on the TV when the
measurement finishes.
Multi measure
Multi measure
(1 listening position + front/back/left/right) (2 listening positions + front/back)
POP-UP/MENU
Cursor keys
ENTER
RETURN
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
3
5
6
7
8
9
0
MEMORY
ENT
b
c a e
d
c
a b
d
4
• If any error message (such as E-1) or warning message (such as W-1)
appears, see “Error messages” (p.40) or “Warning messages” (p.41).
This completes the preparations. See the following page to start the
measurement.
When “Multi Position” is set to “Yes”:
“Measuring at multiple listening positions (multi measure) (RX-V777
only)” (p.37)
When “Multi Position” is set to “No”:
• To check the measurement results, select “Result”. For details, see
“Checking the measurement results” (p.39).
2
Use the cursor keys to select “Save/Cancel” and
press ENTER.
“Measuring at one listening position (single measure)” (p.36)
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
36
1 2 3 4 5 6 7 8 9 10 11
3
HDMI
1
2
3
4
5
To save the measurement results, use the cursor
keys (e/r) to select “SAVE” and press ENTER.
When “Multi Position” is set to “Yes”, follow the procedure below for
measurement. It takes about 10 minutes to measure 8 listening
positions.
V-AUX
AV
1
2
3
4
AUDIO
5
6
1
TUNER
USB
NET
MAIN
PARTY
ZONE 2
2
HDMI OUT
• If any error message (such as E-1) or warning message (such as W-1) appears,
see “Error messages” (p.40) or “Warning messages” (p.41).
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
Measuring at multiple listening positions
(multi measure) (RX-V777 only)
RADIO
1
The adjusted speaker settings are applied.
VOLUME
The measurement will start in 10 seconds. Press ENTER
again to start the measurement immediately.
POP-UP/MENU
ON
SCREEN
• To finish the measurement without saving the result, select “CANCEL”.
OPTION
ENTER
RETURN
DISPLAY
Cursor keys
ENTER
RETURN
4
Use the cursor keys (e/r) to select “YES” or “NO”
to enable/disable YPAO Volume and press ENTER.
• To cancel the measurement temporarily, press RETURN.
The following screen appears on the TV when the
measurement at the first position finishes.
BAND
MODE
TUNING
To start the measurement, use the cursor keys to
select “Measure” and press ENTER.
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
5
6
7
8
9
0
MEMORY
ENT
ENHANCER PURE DIRECT
4
• If YPAO Volume is enabled, the high- and low-frequency levels are
automatically adjusted according to the volume so that you can enjoy
natural sounds even at low volume.
• You can also enable/disable YPAO Volume in “YPAO Volume” (p.88) in the
“Option” menu.
5
2
Disconnect the YPAO microphone from the unit.
Move the YPAO microphone to the next listening
position and press ENTER.
Repeat Step 2 until measurements at all listening positions
(up to 8) have been taken.
This completes optimization of the speaker settings.
Caution
• The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
37
1 2 3 4 5 6 7 8 9 10 11
3
HDMI
1
2
3
4
5
V-AUX
AV
1
2
3
5
6
1
TUNER
USB
6
Use the cursor keys (e/r) to select “YES” or “NO”
to enable/disable YPAO Volume and press ENTER.
When you have taken measurements at 8 listening
positions, the following screen appears automatically.
4
AUDIO
MAIN
When the measurements at the positions you want
to measure are completed, use the cursor keys to
select “CANCEL” and press ENTER.
2
NET
PARTY
ZONE 2
HDMI OUT
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
POP-UP/MENU
ON
SCREEN
• If YPAO Volume is enabled, the high- and low-frequency levels are
automatically adjusted according to the volume so that you can enjoy
natural sounds even at low volume.
OPTION
Cursor keys
ENTER
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
PRESET
4
Use the cursor keys to select “Save/Cancel” and
press ENTER.
5
To save the measurement result, use the cursor
keys to select “SAVE” and press ENTER.
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
5
6
7
8
9
0
MEMORY
ENT
• You can also enable/disable YPAO Volume in “YPAO Volume” (p.88) in the
“Option” menu.
• To check the measurement results, select “Result”. For details, see
“Checking the measurement results” (p.39).
7
Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
ENHANCER PURE DIRECT
3
4
Caution
• The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).
The adjusted speaker settings are applied.
• To finish the measurement without saving the result, select “CANCEL”.
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
38
1 2 3 4 5 6 7 8 9 10 11
Checking the measurement results
3
HDMI
1
2
3
You can check the YPAO measurement results.
4
5
1
V-AUX
AV
1
2
3
4
AUDIO
5
6
TUNER
MAIN
1
USB
Reloading the previous YPAO adjustments
• You can also select “Result” from “Auto Setup” (p.98) in the “Setup” menu,
which displays the previous measurement results.
When the speaker settings you have configured manually are not
suitable, follow the procedure below to discard the manual settings
and reload the previous YPAO adjustments.
2
HDMI OUT
SCENE
BD
DVD
After the measurement, use the cursor keys to
select “Result” and press ENTER.
NET
PARTY
ZONE 2
TV
NET
PROGRAM
MUTE
TOP MENU
The following screen appears.
RADIO
1
In the “Setup” menu, select “Speaker”, “Auto
Setup”, and then “Result” (p.97).
2
Use the cursor keys to select “Setup Reload” and
press ENTER.
3
To exit from the menu, press ON SCREEN.
VOLUME
POP-UP/MENU
ON
SCREEN
1
ON SCREEN
2
OPTION
ENTER
RETURN
To finish checking the results and return to the
previous screen, press RETURN.
DISPLAY
Cursor keys
ENTER
RETURN
3
BAND
MODE
TUNING
1 Measurement result items
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
2 Measurement result details
ENHANCER PURE DIRECT
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
3 The number of measured positions (when multi
measure is performed) * RX-V777 only
2
Use the cursor keys to select an item.
Wiring
Polarity of each speaker
Reverse: The speaker cable may be connected with the
reverse polarity (+/-).
Size
Size of each speaker (cross-over frequency of the
subwoofer)
Large: The speaker can reproduce low-frequency
signals effectively.
Small: The speaker cannot reproduce low-frequency
signals effectively.
Distance
Distance from the listening position to each speaker
Level
Output level adjustment for each speaker
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
39
1 2 3 4 5 6 7 8 9 10 11
Error messages
If any error message is displayed during the measurement, resolve the problem and perform YPAO again.
Error message
Cause
E-1: No Front SP
Front speakers are not detected.
E-2: No Sur. SP
One of the surround speakers cannot be detected.
E-3: No F.PRNS SP
One of the presence speakers cannot be detected.
E-4: SBR → SBL
A surround back speaker is connected to the R side only.
When using only one surround back speaker, you need to connect it to the SINGLE jack (L side). Follow the
on-screen instructions to exit YPAO, turn off the unit, and then reconnect the speaker.
E-5: Noisy
The noise is too loud.
Keep the room quiet and follow the on-screen instructions to start the measurement again. If you select
“PROCEED”, YPAO takes the measurement again and ignores any noise detected.
E-6: Check Sur.
Surround back speakers are connected, but no surround
speakers are connected.
Surround speakers need to be connected in order to use surround back speakers. Follow the on-screen
instructions to exit YPAO, turn off the unit, and then reconnect the speakers.
E-7: No MIC
The YPAO microphone has been removed.
Connect the YPAO microphone to the YPAO MIC jack firmly and follow the on-screen instructions to start the
measurement again.
E-8: No Signal
The YPAO microphone cannot detect test tones.
Connect the YPAO microphone to the YPAO MIC jack firmly and follow the on-screen instructions to start the
measurement again. If this error occurs repeatedly, contact the nearest authorized Yamaha dealer or service
center.
E-9: User Cancel
The measurement has been canceled.
Follow the on-screen instructions to start the measurement again. To cancel the measurement, select “EXIT”.
An internal error has occurred.
Follow the on-screen instructions to exit YPAO, turn off and on the unit. If this error occurs repeatedly, contact
the nearest authorized Yamaha dealer or service center.
E-10: Internal Error
Remedy
Follow the on-screen instructions to exit YPAO, turn off the unit, and then check the speaker connections.
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
40
1 2 3 4 5 6 7 8 9 10 11
Warning messages
If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions.
However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings.
Warning message
Cause
Remedy
W-1: Out of Phase
A speaker cable may be connected with the reverse polarity
(+/-).
Select “Wiring” in “Result” (p.39) and check the cable connections (+/-) of the speaker identified by
“Reverse”.
If the speaker is connected incorrectly:
Turn off the unit and then reconnect the speaker cable.
If the speaker is connected correctly:
Depending on the type of speakers or room environment, this message may appear even if the speakers are
connected correctly. In this case, you can ignore the message.
W-2: Over Distance
A speaker is placed more than 24 m (80 ft) from the listening
position.
Select “Distance” in “Result” (p.39) and move the speaker identified by “>24.00m (>80.0ft)” within 24 m (80
ft) of the listening position.
W-3: Level Error
There are significant volume differences between the
speakers.
Check the usage environment and cable connections (+/-) of each speaker, and the volume of the
subwoofer. We recommend using the same speakers or speakers with specifications that are as similar as
possible.
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
41
1 2 3 4 5 6 7 8 9 10 11
11 Connecting to a network device wirelessly
Connect the unit to a wireless router (access point) or a mobile device by establishing a
wireless connection.
■ Connecting without a wireless router (access point)
Connect a mobile device to the unit directly.
You can use the application for smartphone / tablet “AV CONTROLLER” to control the
unit from mobiles devices or enjoy music files stored on mobiles devices on the unit.
Selecting the connection method
Select a connection method according to your network environment.
■ Connecting with a wireless router (access point)
Connect the unit to a wireless router (access point).
You can enjoy Internet radio, AirPlay, or music files stored on media servers (PC/NAS)
on the unit.
The unit
Mobile device
(such as iPhone)
Internet
For details on connection, see “Connecting a mobile device to the unit directly
(Wireless Direct)” (p.48).
Wireless router
• You cannot use Wireless Direct simultaneously with the wired (network cable) connection (p.30) or the
wireless network connection (p.43).
Modem
• When Wireless Direct is enabled, the following functions are not available.
– Internet radio
– Network services
– Playback of music stored on media servers (PC/NAS)
Mobile device
(such as iPhone)
The unit
• For details on “AV CONTROLLER”, visit the Yamaha website.
For details on connection, see “Connecting the unit to a wireless network” (p.43).
• You cannot use the wireless network connection simultaneously with the wired (network cable) connection
(p.30) or Wireless Direct (p.48).
• If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless
router (access point). In such case, place them close to each other.
PREPARATIONS
➤ Connecting to a network device wirelessly
En
42
1 2 3 4 5 6 7 8 9 10 11
z
Connecting the unit to a wireless network
HDMI
1
2
3
There are several methods to connect the unit to a wireless
network.
4
5
V-AUX
AV
1
2
3
Select a connection method according to your environment.
4
AUDIO
5
6
1
TUNER
USB
NET
MAIN
PARTY
ZONE 2
2
Do you own iOS devices
(iPhone/iPad/iPod touch)?
HDMI OUT
Yes
A (p.43)
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
No
RADIO
Does your wireless router
(access point) has a WPS
button?
VOLUME
POP-UP/MENU
ON
SCREEN
5
6
Use the cursor keys (e/r) to select “Network”.
7
Use the cursor keys (q/w) and ENTER to check
“Wireless (Wi-Fi)” and select “OK”.
Use the cursor keys (q/w) to select “Network
Connection” and press ENTER.
B (p.44)
No
C (p.45)
Cursor keys
ENTER
RETURN
Use the cursor keys to select “Setup” and press
ENTER.
ON SCREEN
OPTION
ENTER
Yes
4
DISPLAY
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
5
6
7
8
9
0
MEMORY
ENT
ENHANCER PURE DIRECT
3
4
■ A: Sharing the iOS device setting
You can easily setup a wireless connection by applying the
connection settings on iOS devices (iPhone/iPad/iPod touch).
Before proceeding, confirm that your iOS device is connected to a
wireless router.
• The checkmark indicates the current setting.
8
Use the cursor keys (q/w) and ENTER to check
“Share Wi-Fi Settings (iOS)” and select “NEXT”.
• You need iOS device with iOS 5.0 or later. For details on supported devices, see
“Supported devices and file formats” (p.131).
1
2
Press z (receiver power) to turn on the unit.
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
• Operations with TV screen are available only when your TV is connected to
the unit via HDMI.
3
Press ON SCREEN.
PREPARATIONS
➤ Connecting to a network device wirelessly
En
43
1 2 3 4 5 6 7 8 9 10 11
z
HDMI
1
2
3
4
5
V-AUX
1
2
3
6
1
Connect the iOS device to the USB jack, and disable
the screen lock on the iOS device.
The unit (front)
AV
5
9
■ B: Using the WPS push button
configuration
You can easily set up a wireless connection with one push of the
WPS button.
4
AUDIO
TUNER
MAIN
USB
VIDEO AUX
2
NET
PARTY
ZONE 2
HDMI/
MHL 5V 1A
VIDEO
5V
2.1A
2.1A
HDMI OUT
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
POP-UP/MENU
ON
SCREEN
ON SCREEN
10 Use the cursor keys (e/r) to select “NEXT” and
• This configuration does not work if the security method of your wireless router
(access point) is WEP. In this case, use other connection method.
1
2
Cursor keys
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
ENHANCER PURE DIRECT
1
2
3
5
6
7
8
9
0
MEMORY
ENT
11 Tap “Allow” in the message appeared on the iOS
device.
When the connection process finishes, “Completed”
appears on the TV screen.
12 To exit from the menu, press ON SCREEN.
Hold down INFO (WPS) on the front panel for 3
seconds.
“Press WPS button on Access Point” appears on the front
display.
press ENTER.
OPTION
ENTER
Press z (receiver power) to turn on the unit.
3
Push the WPS button on the wireless router (access
point).
When the connection process finishes, “Completed”
appears on the front display.
If “Not connected” appears, repeat from Step 1 or try
another connection method.
4
PREPARATIONS
➤ Connecting to a network device wirelessly
En
44
1 2 3 4 5 6 7 8 9 10 11
z
HDMI
1
2
3
4
5
V-AUX
AV
1
2
3
5
6
1
TUNER
USB
NET
PARTY
ZONE 2
If your wireless router (access point) does not support WPS push
button configuration method, follow the procedure below to
configure the wireless network settings.
1
2
2
HDMI OUT
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
Use the cursor keys (q/w) and ENTER to select the
desired connection method and select “NEXT”.
POP-UP/MENU
ON
SCREEN
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
• Operations with TV screen are available only when your TV is connected to
the unit via HDMI.
ON SCREEN
OPTION
Cursor keys
ENTER
ENTER
RETURN
Press z (receiver power) to turn on the unit.
RADIO
VOLUME
3
4
Press ON SCREEN.
5
6
Use the cursor keys (e/r) to select “Network”.
Use the cursor keys to select “Setup” and press
ENTER.
DISPLAY
BAND
MODE
TUNING
8
4
AUDIO
MAIN
■ C: Using other connection methods
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
ENHANCER PURE DIRECT
7
The following connection methods are available.
WPS Button
You can set up a wireless connection with the
WPS button while viewing the TV screen. Follow
the instructions displayed on the TV screen.
Share Wi-Fi
Settings (iOS)
See “Sharing the iOS device setting” (p.43).
Access Point
Scan
You can set up a wireless connection by
searching for an access point. For details on
settings, see “Searching for an access point”
(p.46).
Manual Setting
You can setup a wireless connection by entering
the required information (such as SSID)
manually. For details on settings, see “Setting up
the wireless connection manually” (p.46).
PIN Code
You can set up a wireless connection by entering
the unit’s PIN code into the wireless router
(access point). The method is available if the
wireless router (access point) supports the WPS
PIN code method. For details on settings, see
“Using the PIN code” (p.47).
Use the cursor keys (q/w) to select “Network
Connection” and press ENTER.
Use the cursor keys (q/w) and ENTER to check
“Wireless (Wi-Fi)” and select “OK”.
About WPS
WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance,
which allows easy establishment of a wireless home network.
• The checkmark indicates the current setting.
PREPARATIONS
➤ Connecting to a network device wirelessly
En
45
1 2 3 4 5 6 7 8 9 10 11
HDMI
1
2
3
4
5
V-AUX
❑ Searching for an access point
❑ Setting up the wireless connection manually
If you select “Access Point Scan” as the connection method, the
unit starts searching for access points. After a while, the list of
available access points appears on the TV screen.
If you select “Manual Setting” as the connection method, the
wireless connection setting screen appears on the TV.
AV
1
2
3
4
1
AUDIO
5
6
TUNER
MAIN
1
USB
2
NET
PARTY
ZONE 2
HDMI OUT
TV
NET
PROGRAM
MUTE
TOP MENU
1
Use the cursor keys and ENTER to enter the SSID of
the access point and select “NEXT”.
2
Use the cursor keys (q/w) and ENTER to check the
security method of the access point and select
“NEXT”.
The wireless connection setting screen appears on the TV.
SCENE
BD
DVD
Use the cursor keys and ENTER to check the
desired access point and select “NEXT”.
You need to setup the SSID (network name), encryption method
and security key for your network.
2
RADIO
Use the cursor keys and ENTER to enter the
security key and select “NEXT”.
VOLUME
POP-UP/MENU
ON
SCREEN
ON SCREEN
OPTION
Cursor keys
ENTER
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
5
6
7
8
9
0
MEMORY
ENT
ENHANCER PURE DIRECT
3
3
4
Use the cursor keys (e/r) to select “CONNECT”
and press ENTER to start the connection process.
When the connection process finishes, “Completed”
appears on the TV screen.
If “Not connected” appears, repeat from Step 1 or try
another connection method.
4
To exit from the menu, press ON SCREEN.
Settings
None, WEP, WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (AES),
Mixed Mode
PREPARATIONS
➤ Connecting to a network device wirelessly
En
46
1 2 3 4 5 6 7 8 9 10 11
3
HDMI
1
2
3
4
5
If you select “None” in Step 2, this setting is not available.
Proceed to Step 4.
V-AUX
AV
1
2
3
5
6
1
Use the cursor keys and ENTER to enter the
security key and select “NEXT”.
4
AUDIO
TUNER
MAIN
USB
HDMI OUT
If you select other method, enter either 8 to 63 character
string, or 64 hexadecimal digits.
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
If you select “PIN Code” as the connection method, the list of
available access points appears on the TV screen.
1
If you select “WEP”, enter either 5 or 13 character string, or
10 or 26 hexadecimal digits.
2
NET
PARTY
ZONE 2
❑ Using the PIN code
RADIO
The PIN code of the unit appears on the TV screen.
2
POP-UP/MENU
3
ON SCREEN
OPTION
RETURN
Use the cursor keys (e/r) to select “CONNECT”
and press ENTER to start the connection process.
When the connection process finishes, “Completed”
appears on the TV screen.
Cursor keys
ENTER
ENTER
Enter the unit’s PIN code into the wireless router
(access point).
For details on settings, refer to the instruction manual of the
wireless router (access point).
VOLUME
ON
SCREEN
Use the cursor keys and ENTER to check the
desired access point and select “NEXT”.
DISPLAY
If “Not connected” appears, repeat from Step 1 or try
another connection method.
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
4
Use the cursor keys (e/r) to select “CONNECT”
and press ENTER to start the connection process.
ENHANCER PURE DIRECT
1
2
3
5
6
7
8
9
0
MEMORY
ENT
When the connection process finishes, “Completed”
appears on the TV screen.
4
4
To exit from the menu, press ON SCREEN.
If “Not connected” appears, check that all the information is
entered correctly, and repeat from Step 1.
5
To exit from the menu, press ON SCREEN.
PREPARATIONS
➤ Connecting to a network device wirelessly
En
47
1 2 3 4 5 6 7 8 9 10 11
z
HDMI
1
2
3
4
5
2
3
7
Use the cursor keys (q/w) and ENTER to check
“Wireless Direct” and select “OK”.
Follow the procedure below to connect a mobile device to the unit
directly.
V-AUX
AV
1
Connecting a mobile device to the unit
directly (Wireless Direct)
4
AUDIO
5
6
1
TUNER
USB
NET
MAIN
PARTY
ZONE 2
2
• Wireless Direct connection may be insecure since the communication is not
strongly encrypted. The unit may operate by playback operation on wireless
devices connected to the unit without permission.
HDMI OUT
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
1
2
VOLUME
POP-UP/MENU
ON
SCREEN
ON SCREEN
Press z (receiver power) to turn on the unit.
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
• The checkmark indicates the current setting.
OPTION
Cursor keys
ENTER
ENTER
RETURN
• Operations with TV screen are available only when your TV is connected to
the unit via HDMI.
8
Use the cursor keys (q/w) and ENTER to check the
desired security method and select “NEXT”.
DISPLAY
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
ENHANCER PURE DIRECT
1
2
3
5
6
7
8
9
0
MEMORY
ENT
3
4
Press ON SCREEN.
5
6
Use the cursor keys (e/r) to select “Network”.
Use the cursor keys to select “Setup” and press
ENTER.
4
Use the cursor keys (q/w) to select “Network
Connection” and press ENTER.
Settings
None, WEP
• If you select “None”, the connection may be insecure since the
communication is not encrypted.
PREPARATIONS
➤ Connecting to a network device wirelessly
En
48
1 2 3 4 5 6 7 8 9 10 11
9
HDMI
1
2
3
4
5
If you select “None” in Step 8, this setting is not available.
Proceed to Step 10.
V-AUX
AV
1
2
3
5
6
1
TUNER
USB
NET
Use the cursor keys and ENTER to enter the
security key and select “NEXT”.
4
11 Configure the Wi-Fi settings of a mobile device.
For details on settings of your mobile device, refer to the
instruction manual of the mobile device.
a Enable the Wi-Fi function on the mobile device.
AUDIO
MAIN
PARTY
ZONE 2
Otherwise, enter either 5 or 13 character string.
2
HDMI OUT
c When you are prompted for a password, enter the security key
displayed in Step 10.
SCENE
BD
DVD
TV
NET
b Select the SSID displayed in Step 10 from the list of available
access points.
RADIO
12 To exit from the menu, press ON SCREEN.
PROGRAM
MUTE
TOP MENU
VOLUME
POP-UP/MENU
ON
SCREEN
ON SCREEN
OPTION
Cursor keys
ENTER
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
10 Use the cursor keys (e/r) to select “OK” and press
ENTER to save the setting.
The settings made appear on the TV screen.
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
5
6
7
8
9
0
MEMORY
ENT
ENHANCER PURE DIRECT
4
The SSID and security key information is required for setup
of a mobile device.
PREPARATIONS
➤ Connecting to a network device wirelessly
En
49
PLAYBACK
HDMI
1
2
3
4
5
V-AUX
AV
1
2
3
4
Input selection keys
Basic playback procedure
AUDIO
5
6
1
TUNER
USB
NET
MAIN
PARTY
ZONE 2
2
1
Turn on the external devices (such as a TV or
BD/DVD player) connected to the unit.
2
Use the input selection keys to select an input
source.
3
Start playback on the external device or select a
radio station.
HDMI OUT
HDMI OUT
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
POP-UP/MENU
ON
SCREEN
MUTE
VOLUME
ON SCREEN
Refer to the instruction manual for the external device.
OPTION
For details on the following operations, see the
corresponding pages.
Cursor keys
ENTER
ENTER
RETURN
DISPLAY
• Listening to FM/AM radio (p.58)
BAND
MODE
TUNING
• Playing back iPod music (p.63)
PRESET
• Playing back music stored on a USB storage device
(p.66)
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
ENHANCER PURE DIRECT
• Playing back music stored on media servers (PCs/NAS)
(p.69)
• Listening to Internet radio (p.73)
• Playing back music with AirPlay (p.76)
4
Selecting an HDMI output jack (RX-V777 only)
1
Press HDMI OUT to select an HDMI OUT jack.
Each time you press the key, the HDMI OUT jack to be
used for signal output changes.
VOL.
HDMI OUT 1+2
HDMI OUT 1+2
L C R
SL
SW
SR
SBL
SBR
Outputs the same signal at both the HDMI OUT 1
and HDMI OUT 2 jacks.
HDMI OUT 1
Output the signals at the selected HDMI OUT jack.
HDMI OUT 2
HDMI OUT Off
Does not output the signals at the HDMI OUT jacks.
• You can also select an HDMI output jack by selecting a scene (p.51).
• When “HDMI OUT 1+2” is selected, the unit outputs video signals at the highest
resolution supported by both TVs (or projectors) connected to the unit. (For
example, if you have connected a 1080p TV to the HDMI OUT 1 jack and a 720p
TV to the HDMI OUT 2 jack, the unit outputs 720p video signals.)
Press VOLUME to adjust the volume.
• To mute the audio output, press MUTE. Press MUTE again to unmute.
• To adjust the treble/bass settings, use the “Option” menu or TONE
CONTROL on the front panel (p.88).
On-screen input selection
a Press ON SCREEN.
b Use the cursor keys to select “Input” and press ENTER.
c Use the cursor keys to select the desired input source and
press ENTER.
PLAYBACK ➤ Basic playback procedure
En
50
Selecting the input source and favorite settings with one touch (SCENE)
HDMI
1
2
3
4
5
The SCENE function allows you to select the assigned input source,
sound program, Compressed Music Enhancer on/off, and HDMI
output jack (RX-V777 only) with just one touch.
V-AUX
AV
1
2
3
5
6
1
4
TUNER
USB
NET
AUDIO
MAIN
PARTY
ZONE 2
2
1
HDMI OUT
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
POP-UP/MENU
ON
SCREEN
SCENE
SCENE
Input
Sound
program
BD/DVD
HDMI 1
MOVIE
(Sci-Fi)
Off
HDMI OUT 1+2
TV
AV 4
STRAIGHT
On
HDMI OUT 1+2
NET
NET
RADIO
MUSIC
(7ch Stereo)
On
HDMI OUT 1+2
RADIO
TUNER
MUSIC
(7ch Stereo)
On
HDMI OUT 1+2
ENTER
• Select a sound program (p.52)
• Enable/disable Compressed Music Enhancer (p.57)
HDMI output jack
(RX-V777 only)
• (RX-V777 only)
Selecting an HDMI output jack (p.50)
2
Hold down the desired SCENE key until “SET
Complete” appears on the front display.
DISPLAY
BAND
MODE
TUNING
VOL.
PRESET
SUR. DECODE STRAIGHT
MOVIE
Compressed
Music Enhancer
Perform the following operations to prepare the
settings you want to assign to a scene.
• Select an input source (p.50)
By default, the following settings are registered for each scene.
OPTION
RETURN
1
The input source and settings registered to the
corresponding scene are selected. The unit turns on
automatically when it is in standby mode.
SCENE
BD
DVD
Press SCENE.
Configuring scene assignments
MUSIC
ENHANCER PURE DIRECT
SET Complete
L C R
SL
SW
SR
SBL
SBR
• You can also configure scene assignments in the “Scene” menu (p.92).
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
• The SCENE link playback function allows you to start playback of an external
device connected to the unit via HDMI. To enable SCENE link playback, specify
the device type in “Device Control” (p.93) in the “Scene” menu.
• (RX-V777 [China, Korea, U.K. and Europe models] only)
To control your playback device after selecting a scene with the remote control of
the unit, change the external device assigned to the SCENE keys. For details,
refer to “Supplement for Remote Control” in the supplied CD-ROM.
PLAYBACK ➤ Selecting the input source and favorite settings with one touch (SCENE)
En
51
Selecting the sound mode
HDMI
1
2
3
4
5
The unit is equipped with a variety of sound programs and
surround decoders that allow you to enjoy playback sources with
your favorite sound mode (such as sound field effect or stereo
playback).
V-AUX
AV
1
2
3
4
5
6
1
AUDIO
TUNER
MAIN
USB
2
NET
PARTY
ZONE 2
❑ Selecting a sound program suitable for movies
HDMI OUT
• Press MOVIE repeatedly.
SCENE
BD
DVD
TV
NET
RADIO
a Press ON SCREEN.
b Use the cursor keys to select “Sound Program” and press
ENTER.
c Use the cursor keys to select a sound program/surround
decoder and press ENTER.
This mode lets you enjoy sound field effects optimized for viewing
video sources, such as movies, TV programs, and games (p.53).
PROGRAM
MUTE
TOP MENU
VOLUME
POP-UP/MENU
ON
SCREEN
PROGRAM
ON SCREEN
OPTION
Cursor keys
ENTER
ENTER
RETURN
❑ Selecting a sound program suitable for music or
stereo playback
TUNING
PRESET
SUR. DECODE STRAIGHT
MUSIC
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
5
6
7
8
9
0
MEMORY
ENT
3
4
MOVIE
MUSIC
SUR.DECODE
STRAIGHT
ENHANCER
PURE DIRECT
• You can change the settings of the surround programs and surround decoders in
the “Sound Program” menu (p.94).
• The sound mode can be applied separately to each input source.
This mode lets you enjoy sound field effects optimized for listening
music sources or stereo playback (p.54).
• When you play back audio signals with a sampling rate of higher than 96 kHz, the
straight decode mode (p.56) is automatically selected.
❑ Selecting a surround decoder
BAND
• You can also switch the sound programs and surround decoder by pressing
PROGRAM.
• Press MUSIC repeatedly.
DISPLAY
MODE
MOVIE
On-screen sound program/surround decoder selection
• You can check which speakers are currently outputting sound by looking at the
speaker indicators on the unit’s front panel (p.10) or at the “Audio Signal” screen in
the “Information” menu (p.114).
• Press SUR.DECODE repeatedly.
This mode lets you enjoy unprocessed multichannel playback from
2-channel sources (p.56).
❑ Switching to the straight decode mode
• Press STRAIGHT.
This mode lets you enjoy unprocessed sounds in original channels
(p.56).
❑ Switching to the Pure Direct mode
• Press PURE DIRECT.
This mode lets you enjoy pure high fidelity sound by reducing the
electrical noise from other circuitry (p.57).
❑ Enabling Compressed Music Enhancer
• Press ENHANCER.
This mode lets you enjoy compressed music with additional depth
and breadth (p.57).
PLAYBACK ➤ Selecting the sound mode
En
52
Enjoying stereoscopic sound fields (CINEMA DSP 3D)
■ Sound programs suitable for movies (MOVIE)
The following sound programs are optimized for viewing video sources, such as
movies, TV programs, and games.
The unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP
technology (CINEMA DSP 3D). It allows you to easily create sound fields like actual
movie theaters or concert halls in your room and enjoy natural stereoscopic sound
fields.
❑ MOVIE THEATER
Standard
This program creates a sound field that emphasizes the surround feeling
without disturbing the original acoustic positioning of multichannel audio,
such as Dolby Digital and DTS. Its design is based on the concept of the
ideal movie theater, in which the audience is surrounded by beautiful
reverberations from the left, right, and rear.
Spectacle
This program delivers the scale and grandeur of spectacular movie
productions. It delivers an expansive sound space to match the
cinemascope wide-screen, and boasts a broad dynamic range, providing
everything from small delicate sounds to powerful loud booms.
Sci-Fi
This program clearly reproduces the finely elaborated sound design of the
latest Sci-Fi and SFX movies. You can enjoy a variety of
cinematographically created virtual spaces reproduced with clear
separation between dialogue, sound effects, and background music.
Adventure
This program is ideal for reproducing the sound design of action and
adventure movies precisely. The sound field restrains reverberations, but
puts emphasis on reproducing a sensation of expansiveness on both sides,
powerful space expanded widely to the left and right. The restrained depth
creates a clear and powerful space, while also maintaining the articulation
of the sounds and the separation of the channels.
Drama
This program features stable reverberations that match a wide range of
movie genres, from serious dramas to musicals and comedies. The
reverberations are modest, but suitably stereophonic. The sound effects
and background music are reproduced with a gentle echo that does not
impinge on the articulation of the dialogue. You’ll never get tired listening for
long periods.
Mono Movie
This program reproduces monaural video sources, such as classic movies,
in an atmosphere of a good old movie theater. The program creates a
pleasant space with depth, by adding breadth and the appropriate
reverberation to the original audio.
Sound program category
“CINEMA DSP” lights up
VOL.
Hall in Vienna
FPL L C R FPR
SL
SW
SR
SBL
SBR
Sound program
• To use the conventional CINEMA DSP, set “CINEMA DSP 3D Mode” (p.104) in the “Setup” menu to “Off”.
• We recommend using presence speakers in order to experience the full effect of the stereoscopic sound
fields. However, even when no presence speakers are connected, the unit creates Virtual Presence
Speaker (VPS) using the front, center, and surround speakers to produce stereoscopic sound fields. When
VPS is working, “VIRTUAL” lights up in the front display.
PLAYBACK ➤ Selecting the sound mode
En
53
❑ ENTERTAINMENT
Sports
This program allows listeners to enjoy the rich vividness of sport broadcasts
and light entertainment programs. In sports broadcasts, the commentators’
voices are positioned clearly at the center, while the atmosphere inside the
stadium is realistically conveyed by the peripheral delivery of the sounds of
the fans in a suitable space.
Action Game
This program is suitable for action games, such as car racing and fighting
games. The reality of, and emphasis on, various effects makes the player
feel like they are right in the middle of the action, allowing for greater
concentration. Use this program in combination with Compressed Music
Enhancer for a more dynamic and strong sound field.
Roleplaying Game
This program is suitable for role-playing and adventure games. This
program adds depth to the sound field for natural and realistic reproduction
of background music, special effects, and dialogue from a wide variety of
scenes. Use this program in combination with Compressed Music
Enhancer for a clearer and more spatial sound field.
Music Video
This program allows you to enjoy videos of pop, rock, and jazz concerts, as
if you were there yourself. Immerse yourself in the hot concert atmosphere
thanks to the vividness of the singers and solos on stage, a presence
sound field that emphasizes the beat of rhythm instruments, and a surround
sound field that reproduces the space of a big live hall.
■ Sound programs suitable for music/stereo playback
(MUSIC)
The following sound programs are optimized for listening to music sources.
You can also select stereo playback.
❑ CLASSICAL
Hall in Munich
This program simulates a Munich concert hall with approximately 2,500
seats that uses stylish wood for the interior finishing. Fine, beautiful
reverberations spread richly, creating a calming atmosphere. The listener’s
virtual seat is at the center left of the arena.
Hall in Vienna
This program simulates a 1,700-seat, middle-sized concert hall with a
shoebox shape that is traditional in Vienna. Pillars and ornate carvings
create extremely complex reverberations from all around the audience,
producing a very full, rich sound.
Chamber
This program creates a relatively wide space with a high ceiling, like an
audience hall in a palace. It offers pleasant reverberations that are suitable
for courtly music and chamber music.
❑ LIVE/CLUB
Cellar Club
This program simulates an intimate concert venue with a low ceiling and
homey atmosphere. A realistic, live sound field delivers powerful sounds
that make you feel as if you are sitting in the front row in front of a small
stage.
The Roxy Theatre
This program creates the sound field of a 460-seat rock music concert
venue in Los Angeles. The listener’s virtual seat is at the center left of the
hall.
The Bottom Line
This program creates the sound field at stage front in The Bottom Line, a
famous New York jazz club once. The floor can seat 300 people to the left
and right in a sound field offering real and vibrant sound.
❑ STEREO
2ch Stereo
Use this program to mix down multichannel sources to 2 channels. When
multichannel signals are input, they are down mixed to 2 channels and
output from the front speakers (this program does not utilize CINEMA DSP).
7ch Stereo
Use this program to output sound from all speakers. When you play back
multichannel sources, the unit mixes down the source to 2 channels, and
then outputs the sound from all speakers. This program creates a larger
sound field and is ideal for background music at parties.
• CINEMA DSP 3D (p.53) and Virtual CINEMA DSP (p.55) do not work when “2ch Stereo” or “7ch Stereo” is
selected.
PLAYBACK ➤ Selecting the sound mode
En
54
■ Enjoying sound field effects without surround speakers
(Virtual CINEMA DSP)
If you select one of the sound programs (except 2ch Stereo and 7ch Stereo) when no
surround speakers are connected, the unit utilizes Yamaha’s original virtual surround
technology to reproduce up to 7-channel surround sound and enable you to enjoy the
well-oriented sound field only with the front-side speakers. We recommend using
presence speakers in order to enjoy more effective stereoscopic sound field.
• When Virtual CINEMA DSP is working, “VIRTUAL” lights up in the front display.
■ Enjoying surround sound with 5 speakers placed in
front (Virtual CINEMA FRONT)
If you have surround speakers but there is no space to place them in the rear of your
room, you can place them in the front (p.17) and enjoy multi-channel surround sound
using Virtual CINEMA FRONT.
When “Layout (Surround)” (p.101) in the “Setup” menu is set to “Front”, the unit creates
the virtual surround speakers in the rear side to allow you to enjoy multi-channel
surround sound with the 5 speakers placed in the front.
• When Virtual CINEMA FRONT is working, “VIRTUAL” lights up in the front display.
■ Enjoying surround sound with headphones
(SILENT CINEMA)
You can enjoy surround or sound field effects, like a multichannel speaker system, with
stereo headphones by connecting the headphones to the PHONES jack and selecting
a sound program or a surround decoder.
PLAYBACK ➤ Selecting the sound mode
En
55
Enjoying unprocessed playback
HDMI
1
2
3
You can play back input sources without any sound field effect
processing.
4
5
V-AUX
AV
1
2
3
5
6
1
4
TUNER
USB
NET
■ Playing back in original channels
(straight decode)
AUDIO
MAIN
PARTY
ZONE 2
2
HDMI OUT
When the straight decode mode is enabled, the unit produces
stereo sound from the front speakers for 2-channel sources such as
CDs, and produces unprocessed multichannel sounds for
multichannel sources.
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
■ Playing back 2-channel sources in
multichannel (surround decoder)
The surround decoder enables unprocessed multichannel
playback from 2-channel sources. When a multichannel source is
input, it works the same way as the straight decode mode.
For details on each decoder see “Glossary” (p.129).
1
Press SUR.DECODE to select a surround decoder.
Each time you press the key, the surround decoder
changes.
VOLUME
1
POP-UP/MENU
ON
SCREEN
VOL.
Press STRAIGHT.
Each time you press the key, the straight decode mode is
enabled or disabled.
OPTION
†‡Pro Logic
bPro Logic
ENTER
bPLIIx Movie
VOL.
RETURN
STRAIGHT
DISPLAY
BAND
L C R
SL
SW
SR
SBL
SBR
bPLIIx Music
MODE
TUNING
SUR.DECODE
PRESET
bPLII Music
SUR. DECODE STRAIGHT
STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
ENHANCER PURE DIRECT
bPLII Movie
SL
L C R
SW
SR
Uses the Dolby Pro Logic decoder suitable for all
sources.
Use the Dolby Pro Logic IIx decoder (or Dolby Pro
Logic II decoder) suitable for movies.
Use the Dolby Pro Logic IIx decoder (or Dolby Pro
Logic II decoder) suitable for music.
• To enable 6.1/7.1-channel playback from 5.1-channel sources when surround
back speakers are used, set “Extended Surround” (p.104) in the “Setup” menu to
a setting other than “Off”.
bPLIIx Game
Use the Dolby Pro Logic IIx decoder (or Dolby Pro
Logic II decoder) suitable for games.
• If “Layout (Surround)” (p.101) in the “Setup” menu is set to “Front”, Virtual
CINEMA FRONT (p.55) works when multi-channel source is played back.
bPLII Game
Neo:6 Cinema
Uses the DTS Neo:6 decoder suitable for movies.
Neo:6 Music
Uses the DTS Neo:6 decoder suitable for music.
• You cannot select the Dolby Pro Logic IIx decoders when headphones are
connected or when “Surround Back” in the “Setup” menu is set to “None”.
PLAYBACK ➤ Selecting the sound mode
En
56
Enjoying pure high fidelity sound (Pure Direct)
HDMI
1
2
3
When the Pure Direct mode is enabled, the unit plays back the
selected source with the least circuitry in order to reduce the
electrical noise from other circuitry (such as the front display). It
allows you to enjoy Hi-Fi sound quality.
4
5
V-AUX
AV
1
2
3
5
6
1
4
TUNER
USB
NET
AUDIO
MAIN
PARTY
ZONE 2
2
1
HDMI OUT
TV
NET
Press PURE DIRECT.
Each time you press the key, the Pure Direct mode is
enabled or disabled.
SCENE
BD
DVD
RADIO
MUTE
TOP MENU
VOLUME
PURE DIRECT
L C R
SL
SW
SR
SBL
SBR
POP-UP/MENU
ON
SCREEN
Compressed Music Enhancer adds depth and breadth to the
sound, allowing you to enjoy a dynamic sound close to the original
sound before it was compressed. This function can be used along
with any other sound modes.
1
VOL.
PROGRAM
Enjoying compressed music with enhanced
sound (Compressed Music Enhancer)
Press ENHANCER.
Each time you press the key, Compressed Music Enhancer
is enabled or disabled.
“ENHANCER” lights up
OPTION
• When the Pure Direct mode is enabled, the following functions are not available.
ENTER
– Some settings for the speakers or sound programs
ENHANCER
VOL.
RETURN
– Operating the on-screen menu and some items in the “Option” menu
DISPLAY
– Using the multi-zone function
BAND
MODE
TUNING
– Viewing information on the front display (when not in operation)
MUSIC
ENHANCER PURE DIRECT
INFO
L C R
SL
SW
SR
SBL
SBR
– Output from the AV OUT jacks
PRESET
SUR. DECODE STRAIGHT
MOVIE
Enhancer On
PURE DIRECT
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
• Compressed Music Enhancer does not work on signals whose sampling
rate is over 48 kHz.
ENHANCER
• You can also use “Enhancer” (p.89) in the “Option” menu to enable/disable
Compressed Music Enhancer.
PLAYBACK ➤ Selecting the sound mode
En
57
Listening to FM/AM radio
HDMI
1
2
3
4
5
You can tune into a radio station by specifying its frequency or
selecting from registered radio stations.
V-AUX
AV
1
2
3
5
6
1
TUNER
USB
NET
4
AUDIO
MAIN
PARTY
ZONE 2
2
HDMI OUT
• The radio frequencies differ depending on the country or region where the unit is
being used. The explanation of this section uses a display with frequencies used
in U.K. and Europe models.
RADIO
• If you cannot obtain good reception on the radio, adjust the direction of the FM/AM
antennas.
TUNER
SCENE
BD
DVD
TV
Selecting a frequency for reception
NET
1
Press TUNER to select “TUNER” as the input
source.
2
Press BAND to select a band (FM or AM).
VOL.
PROGRAM
MUTE
TOP MENU
Setting the frequency steps
VOLUME
(Asia and General models only)
POP-UP/MENU
ON
SCREEN
At the factory, the frequency step setting is set to 50 kHz for FM and
9 kHz for AM. Depending on your country or region, set the
frequency steps to 100 kHz for FM and 10 kHz for AM.
OPTION
ENTER
RETURN
DISPLAY
BAND
BAND
MODE
TUNING
PRESET
TUNING
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
1
2
ENHANCER PURE DIRECT
Set the unit to standby mode.
When holding down STRAIGHT on the front panel,
press MAIN ZONE z.
MAIN ZONE z
FM 87.50MHz
3
Use the following keys to set a frequency.
TUNING: Increase/decrease the frequency. Hold down the
key for about a second to search stations automatically.
Numeric keys: Enter a frequency directly. For example, to
select 98.50 MHz, press “9”, “8”, “5” and “0” (or ENT).
STEREO TUNED
VOL.
FM 98.50MHz
L C R
SL
SW
SR
SBL
SBR
“TUNED” lights up when a signal is received from a radio
station.
Numeric keys
“STEREO” also lights up when a stereo signal is received.
PROGRAM
3
STRAIGHT
Press PROGRAM repeatedly to select “TU”.
TUFM50/AM9
4
5
• “Wrong Station!” appears when you enter a frequency that is out of
reception range.
• You can switch between “Stereo” (stereo) and “Mono” (monaural) for FM
radio reception in “FM Mode” (p.89) in the “Option” menu. When the signal
reception for an FM radio station is unstable, switching to monaural may
improve it.
Press STRAIGHT to select “FM100/AM10”.
Press MAIN ZONE z to set the unit to standby
mode and turn it on again.
PLAYBACK ➤ Listening to FM/AM radio
En
58
Registering favorite radio stations (presets)
HDMI
1
2
3
You can register up to 40 radio stations as presets. Once you have
registered stations, you can easily tune into them by selecting their
preset numbers.
4
5
V-AUX
AV
1
2
3
4
■ Selecting a preset station
Tune into a registered radio station by selecting its preset number.
1
Press TUNER to select “TUNER” as the input
source.
2
Press PRESET repeatedly to select the desired radio
station.
AUDIO
5
6
1
TUNER
USB
NET
MAIN
PARTY
ZONE 2
2
TUNER
HDMI OUT
• You can automatically register FM radio stations that have strong signals by using
“Auto Preset” (p.62).
SCENE
BD
DVD
TV
NET
■ Registering a radio station
RADIO
Select a radio station manually and register it to a preset number.
PROGRAM
MUTE
VOLUME
You can also enter a preset number (01 to 40) directly by
using the numeric keys after pressing PRESET once.
STEREO TUNED
VOL.
TOP MENU
POP-UP/MENU
ON
SCREEN
1
Follow “Selecting a frequency for reception” (p.58)
to tune into the desired radio station.
2
Hold down MEMORY for more than 2 seconds.
• “No Presets” appears when no radio stations are registered.
The first time that you do register a station, the selected
radio station will be registered to the preset number “01”.
Thereafter, each radio station you select will be registered
to the next empty (unused) preset number after the most
recently registered number.
• “Wrong Num.” appears when an invalid number is entered.
01:FM 98.50MHz
L C R
SL
SW
SR
SBL
SBR
OPTION
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
PRESET
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
ENHANCER PURE DIRECT
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
• “Empty” appears when a preset number not in use is entered.
• To clear preset stations, use “Clear Preset” or “Clear All Preset” (p.62).
STEREO TUNED
VOL.
Numeric keys
MEMORY
01:FM 98.50MHz
L C R
SL
SW
SR
SBL
SBR
Preset number
• To select a preset number for registering, press MEMORY once after tuning
into the desired radio station, press PRESET to select a preset number, and
then press MEMORY again.
STEREO TUNED
VOL.
02:Empty
L C R
SL
SW
SR
SBL
SBR
“Empty” (not in use) or the frequency currently registered
PLAYBACK ➤ Listening to FM/AM radio
En
59
Radio Data System tuning
• “Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not
displayed if the radio station does not provide the Radio Data System
service.
HDMI
1
2
3
(U.K. and Europe models only)
4
5
Radio Data System is a data transmission system used by FM
stations in many countries. The unit can receive various types of
Radio Data System data, such as “Program Service”, “Program
Type,” “Radio Text” and “Clock Time”, when it is tuned into a Radio
Data System broadcasting station.
V-AUX
AV
1
2
3
4
5
6
1
AUDIO
TUNER
MAIN
USB
2
NET
PARTY
ZONE 2
HDMI OUT
■ Displaying the Radio Data System
information
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
1
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
OPTION
Cursor keys
ENTER
RETURN
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
Tune into the desired Radio Data System
broadcasting station.
• We recommend using “Auto Preset” to tune into the Radio Data System
broadcasting stations (p.62).
2
Press INFO.
When “TUNER” is selected as the input source, the unit
automatically receives traffic information. To enable this function,
follow the procedure below to set the traffic information station.
1
When “TUNER” is selected as the input source,
press OPTION.
2
Use the cursor keys to select “Traffic Program”
(TrafficProgram) and press ENTER.
The traffic information station search will start in 5 seconds.
Press ENTER again to start the search immediately.
Each time you press the key, the displayed item changes.
ENHANCER STEREO TUNED
CHARGE
OUT
ENHANCER PURE DIRECT
■ Receiving traffic information
automatically
SLEEP MUTE
VOL.
ECO
ADAPTIVE DRC VIRTUAL
Program Type
INFO
SBL
SBR
• To search upward/downward from the current frequency, press the cursor
keys (q/w) while “READY” is displayed.
• To cancel the search, press RETURN.
• Texts in parentheses denote indicators on the front display.
Item name
About 3 seconds later, the corresponding information for
the displayed item appears.
The following screen appears for about 3 seconds when the
search finishes.
CHARGE
OUT
ENHANCER STEREO TUNED
CHARGE
OUT
ECO
SLEEP MUTE
VOL.
ECO
CLASSICS
ADAPTIVE DRC VIRTUAL
SBL
SBR
ENHANCER STEREO TUNED
SLEEP MUTE
VOL.
TP FM101.30MHz
ADAPTIVE DRC VIRTUAL
SBL
SBR
Traffic information station (frequency)
Information
Program Service Program service name
Program Type
Current program type
Radio Text
Information on the current program
Clock Time
Current time
DSP Program
Sound mode name
Audio Decoder
Decoder name
Frequency
Frequency
• “TP Not Found” appears for about 3 seconds when no traffic information
stations are found.
PLAYBACK ➤ Listening to FM/AM radio
En
60
Operating the radio on the TV
Menu
HDMI
1
2
3
You can view the radio information or select a radio station on the
TV.
4
5
V-AUX
Submenu
Function
FM
AM
(U.K. and Europe models only)
Switches to FM/AM.
Tuning (+/-)
Selects a frequency.
Auto (+/-)
Selects a radio station automatically.
Memory
Registers the selected station as
presets.
Direct
Enters a frequency directly.
AV
1
2
3
5
6
1
4
TUNER
USB
NET
1
AUDIO
MAIN
PARTY
ZONE 2
2
TUNER
Press TUNER to select “TUNER” as the input
source.
Manual Tuning
The playback screen is displayed on the TV.
HDMI OUT
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
■ Playback screen
RADIO
VOLUME
1
TOP MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
Moves to the browse screen (preset
station list).
Screen Off
Closes the screen display and shows
the background. Press one of the
menu operation keys to redisplay it.
3
2
POP-UP/MENU
Browse
4
Menu operation keys
Cursor keys
ENTER
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
1 Radio station information
Displays the information of the selected radio station such as the selected
band (FM/AM) and frequency.
(U.K. and Europe models only)
When tuning into a Radio Data System broadcasting station (p.60), the
Radio Data System information (“Program Service”, “Program Type,”
“Radio Text” and “Clock Time”) is also displayed.
2 Band icon
(Except for U.K. and Europe models)
Select this icon and press ENTER to switch between FM and AM.
3 TUNED/STEREO indicators
“TUNED” lights up when a signal is received from a radio station.
“STEREO” lights up when a stereo signal is received.
4 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
PLAYBACK ➤ Listening to FM/AM radio
En
61
■ Browse screen
HDMI
1
2
3
4
5
1
V-AUX
AV
1
2
3
4
5
6
1
TUNER
USB
NET
AUDIO
MAIN
PARTY
ZONE 2
3
2
HDMI OUT
2
SCENE
BD
DVD
TV
NET
RADIO
1 Preset station list
PROGRAM
MUTE
TOP MENU
VOLUME
Displays the list of preset stations. Use the cursor keys to select a preset
station and press ENTER to tune into it.
2 Preset number
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
BAND
3 Operation menu
Menu operation keys
Cursor keys
ENTER
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Menu
Submenu
Function
Memory
Registers the current station to the
preset number selected in the list.
Auto Preset
Automatically registers FM radio
stations with strong signals (up to 40
stations).
Clear Preset
Clear the preset station selected in the
list.
Clear All Preset
Clear all the preset stations.
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
ENHANCER PURE DIRECT
Utility
1 Page Up
1 Page Down
Moves to the previous/next page of the
list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows
the background. Press one of the
menu operation keys to redisplay it.
• (U.K. and Europe models only)
Only Radio Data System broadcasting stations are stored automatically by “Auto
Preset”.
PLAYBACK ➤ Listening to FM/AM radio
En
62
Playing back iPod music
HDMI
1
2
3
4
5
You can play back iPod music on the unit using a USB cable
supplied with the iPod.
V-AUX
AV
1
2
3
5
6
1
4
Follow the procedure below to operate the iPod contents and start
playback.
AUDIO
TUNER
MAIN
USB
2
USB
NET
PARTY
ZONE 2
HDMI OUT
• For details on playable iPod devices, see “Supported devices and file formats”
(p.131).
TV
NET
PROGRAM
MUTE
TOP MENU
Connecting an iPod
RADIO
POP-UP/MENU
OPTION
ENTER
RETURN
DISPLAY
Press USB to select “USB” as the input source.
The browse screen is displayed on the TV.
Connect your iPod to the unit with the USB cable supplied with the
iPod.
VOLUME
ON
SCREEN
You can control the iPod with the menu displayed on the TV screen.
1
SCENE
BD
DVD
Playback of iPod content
Cursor keys
ENTER
RETURN
1
2
Connect the USB cable to the iPod.
Connect the USB cable to the USB jack.
The unit (front)
BAND
MODE
TUNING
STRAIGHT
PRESET
VIDEO AUX
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
5
6
7
8
9
0
MEMORY
ENT
HDMI/
MHL 5V 1A
VIDEO
5V
2.1A
• If playback is ongoing on your iPod, the playback screen is displayed.
ENHANCER PURE DIRECT
3
2
4
Use the cursor keys to select an item and press
ENTER.
If a song is selected, playback starts and the playback
screen is displayed.
VOL.
Connected
L C R
SL
SW
SR
SBL
SBR
• The iPod charges while it is connected to the unit. If you set the unit to standby
mode while the iPod is charging, the iPod continues to charge up to 4 hours. If
“Network Standby” (p.108) in the “Setup” menu is set to “On”, it continues to
charge without limit.
• Disconnect the iPod from the USB jack when it is not in use.
• To return to the previous screen, press RETURN.
• To operate the iPod manually to select content or control playback, switch to the
simple play mode (p.65).
PLAYBACK ➤ Playing back iPod music
En
63
■ Browse screen
HDMI
1
2
3
1
2
3
4
5
V-AUX
AV
1
2
3
5
6
1
TUNER
USB
NET
■ Playback screen
4
1
2
AUDIO
MAIN
PARTY
ZONE 2
HDMI OUT
4
SCENE
BD
DVD
TV
NET
RADIO
1 Status indicators
PROGRAM
MUTE
TOP MENU
VOLUME
Display the current shuffle/repeat settings (p.65) and playback status
(such as play/pause).
OPTION
3 Contents list
ENTER
RETURN
DISPLAY
BAND
Menu operation keys
Cursor keys
ENTER
RETURN
MODE
TUNING
External device
operation keys
PRESET
SUR. DECODE STRAIGHT
MUSIC
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
Displays the list of iPod content. Use the cursor keys to select an item and
press ENTER to confirm the selection.
4 Item number/total
5 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Menu
1 Status indicators
Display the current shuffle/repeat settings (p.65) and playback status
(such as play/pause).
2 Playback information
2 List name
POP-UP/MENU
ON
SCREEN
MOVIE
3
5
2
Displays the artist name, album name, song title, and elapsed/remaining
time.
Use the cursor keys to select scrollable information.
3 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
Menu
Function
1 Page Up
Moves to the previous/next page of the list.
1 Page Down
10 Pages Up
Moves 10 pages forward/backward.
Play Control
10 Pages Down
Submenu
Function
a
Resumes playback from pause.
s
Stops playback.
d
Stops playback temporarily.
f
g
Return
Returns to the higher-level list.
h
Now Playing
Moves to the playback screen.
j
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
Skips forward/backward.
Searches forward/backward (by holding
down).
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu
operation keys to redisplay it.
• You can also use the external device operation keys on the remote control to
control playback.
PLAYBACK ➤ Playing back iPod music
En
64
■ Operating the iPod itself or remote control
(simple play)
HDMI
1
2
3
1
V-AUX
AV
2
3
4
6
TUNER
MAIN
1
USB
2
HDMI OUT
2
SCENE
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
1
When “USB” is selected as the input source, press
OPTION.
Operate your iPod itself or the remote control to
start playback.
2
Use the cursor keys to select “Shuffle” (Shuffle) or
“Repeat” (Repeat) and press ENTER.
Operational remote control
Function
keys
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
OPTION
Cursor keys
ENTER
RETURN
Cursor keys
Select an item.
• To return to the previous screen during menu operations, press RETURN.
ENTER
Confirms the selection.
• Texts in parentheses denote indicators on the front display.
RETURN
Returns to the previous screen.
a
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
ENHANCER PURE DIRECT
1
2
3
4
5
6
7
8
9
0
MEMORY
• During simple play, configure the shuffle/repeat settings directly on your iPod or
press MODE to display the TV menu screen and then follow the procedure below.
To display the TV menu screen, press MODE again.
NET
PARTY
ZONE 2
BD
DVD
Press MODE to switch to the simple play mode.
The TV menu screen turns off and iPod operations are
enabled.
AUDIO
5
You can configure the shuffle/repeat settings of your iPod.
4
5
1
■ Shuffle/repeat settings
External device
operation keys
MODE
External device
operation keys
d
Starts playback or stops playback
temporarily.
s
Stops playback.
f
g
h
ENT
j
Skips forward/backward.
3
Use the cursor keys (e/r) to select a setting.
Item
Shuffle
(Shuffle)
Searches forward/backward (by holding
down).
Repeat
(Repeat)
4
Setting
Function
Off (Off)
Turns off the shuffle function.
Songs (Songs)
Plays back songs in random order.
“x” appears in the TV screen.
Albums
(Albums)
Plays back albums in random order.
“x” appears in the TV screen.
Off (Off)
Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
“c” appears in the TV screen.
All (All)
Plays back all songs repeatedly.
“v” appears in the TV screen.
To exit from the menu, press OPTION.
PLAYBACK ➤ Playing back iPod music
En
65
Playing back music stored on a USB storage device
HDMI
1
2
3
4
5
You can play back music files stored on a USB storage device on
the unit.
V-AUX
AV
1
2
3
4
The unit supports USB mass storage class devices (FAT16 or
FAT32 format).
AUDIO
5
6
TUNER
MAIN
1
USB
2
HDMI OUT
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
POP-UP/MENU
ON
SCREEN
• Connect a USB storage device directly to the USB jack of the unit. Do not use
extension cables.
USB
NET
PARTY
ZONE 2
OPTION
Playback of USB storage device contents
• For details on playable file formats, see “Supported devices and file formats”
(p.131).
Follow the procedure below to operate the USB storage device
contents and start playback.
Connecting a USB storage device
1
You can control the USB memory device with the menu displayed
on the TV screen.
Connect the USB storage device to the USB jack.
1
The unit (front)
ENTER
RETURN
• Stop playback of the USB storage device before disconnect it from the USB jack.
DISPLAY
Press USB to select “USB” as the input source.
The browse screen is displayed on the TV.
RADIO
BAND
MODE
TUNING
PRESET
STRAIGHT
VIDEO AUX
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
ENHANCER PURE DIRECT
1
2
3
5
6
7
8
9
0
MEMORY
ENT
HDMI/
MHL 5V 1A
VIDEO
5V
2.1A
4
• If playback is ongoing on your USB storage device, the playback screen is
displayed.
USB storage device
VOL.
Connected
L C R
SL
SW
SR
SBL
SBR
• If the USB storage device contains many files, it may take time to load the them. In
this case, “Loading...” appears in the front display.
PLAYBACK ➤ Playing back music stored on a USB storage device
En
66
2
HDMI
1
2
3
4
5
AV
2
3
5
6
1
TUNER
USB
NET
1
2
3
If a song is selected, playback starts and the playback
screen is displayed.
V-AUX
1
■ Browse screen
Use the cursor keys to select an item and press
ENTER.
4
AUDIO
MAIN
PARTY
ZONE 2
5
2
HDMI OUT
4
SCENE
BD
DVD
TV
NET
RADIO
1 Status indicators
PROGRAM
MUTE
TOP MENU
VOLUME
2 List name
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
3 Contents list
Menu operation keys
Cursor keys
ENTER
RETURN
Displays the list of USB storage device contents. Use the cursor keys to
select an item and press ENTER to confirm the selection.
• To return to the previous screen, press RETURN.
• Files not supported by the unit cannot be selected.
• If the unit detects a series of unsupported files (such as images and hidden
files) during playback, playback stops automatically.
4 Item number/total
5 Operation menu
PRESET
SUR. DECODE STRAIGHT
MOVIE
Display the current shuffle/repeat settings (p.68) and playback status
(such as play/pause).
MUSIC
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
Menu
Function
1 Page Up
Moves to the previous/next page of the list.
1 Page Down
10 Pages Up
Moves 10 pages forward/backward.
10 Pages Down
Return
Returns to the higher-level list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
PLAYBACK ➤ Playing back music stored on a USB storage device
En
67
■ Playback screen
HDMI
1
2
3
V-AUX
AV
1
2
3
5
6
1
You can configure the shuffle/repeat settings for playback of USB
storage device contents.
1
2
4
5
■ Shuffle/repeat settings
4
AUDIO
TUNER
MAIN
USB
3
2
1
When “USB” is selected as the input source, press
OPTION.
2
Use the cursor keys to select “Shuffle” (Shuffle) or
“Repeat” (Repeat) and press ENTER.
NET
PARTY
ZONE 2
HDMI OUT
SCENE
BD
DVD
TV
NET
RADIO
1 Status indicators
PROGRAM
MUTE
TOP MENU
VOLUME
OPTION
ENTER
RETURN
DISPLAY
BAND
OPTION
Menu operation keys
Cursor keys
ENTER
RETURN
MODE
TUNING
External device
operation keys
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
• Texts in parentheses denote indicators on the front display.
2 Playback information
POP-UP/MENU
ON
SCREEN
• To return to the previous screen during menu operations, press RETURN.
Display the current shuffle/repeat settings (p.68) and playback status
(such as play/pause).
3
Displays the artist name, album name, song title, and elapsed time.
Use the cursor keys to select scrollable information.
Item
3 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
Menu
ENHANCER PURE DIRECT
Play Control
Submenu
Function
a
Resumes playback from pause.
s
Stops playback.
d
Stops playback temporarily.
Shuffle
(Shuffle)
Repeat
(Repeat)
f
g
Use the cursor keys (e/r) to select a setting.
Skips forward/backward.
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu
operation keys to redisplay it.
4
Setting
Function
Off (Off)
Turns off the shuffle function.
On (On)
Plays back songs in the current album
(folder) in random order.
“x” appears on the TV screen.
Off (Off)
Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
“c” appears on the TV screen.
All (All)
Plays back all songs in the current album
(folder) repeatedly.
“v” appears on the TV screen.
To exit from the menu, press OPTION.
• You can also use the external device operation keys (a, s, d, f, g) on
the remote control to control playback.
PLAYBACK ➤ Playing back music stored on a USB storage device
En
68
Playing back music stored on media servers (PCs/NAS)
You can play back music files stored on your PC or DLNA-compatible NAS on the unit.
• To use this function, the unit and your PC must be connected to the same router (p.30). You can check
whether the network parameters (such as the IP address) are properly assigned to the unit in “Network”
(p.115) in the “Information” menu.
• The audio may be interrupted while using the wireless network connection. In this case, use the wired
network connection.
• For details on playable file formats, see “Supported devices and file formats” (p.131).
❑ For Windows Media Player 11
1
2
3
Start Windows Media Player 11 on your PC.
4
Click “OK” to exit.
Select “Library”, then “Media Sharing”.
Check the “Share my media to” box, select the unit’s icon, and click
“Allow”.
Media sharing setup
To play back music files stored on your PC or DLNA-compatible NAS, first you need to
configure the media sharing setting on each music server.
■ For a PC with Windows Media Player installed
❑ For Windows Media Player 12
1
2
3
4
Start Windows Media Player 12 on your PC.
5
Click “OK” to exit.
• For details on media sharing settings, refer to Windows Media Player help.
■ For a PC or a NAS with other DLNA server software
installed
Refer to the instruction manual for the device or software and configure the media
sharing settings.
Select “Stream”, then “Turn on media streaming”.
Click “Turn on media streaming”.
Select “Allowed” from the drop-down list next to the unit’s model
name.
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS)
En
69
Playback of PC music contents
3
HDMI
1
2
3
Follow the procedure below to operate the PC music contents and
start playback.
4
5
V-AUX
AV
1
2
3
5
6
1
TUNER
USB
NET
You can control the PC/NAS with the menu displayed on the TV
screen.
4
AUDIO
MAIN
PARTY
ZONE 2
2
NET
HDMI OUT
1
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
Use the cursor keys to select an item and press
ENTER.
If a song is selected, playback starts and the playback
screen is displayed.
Press NET repeatedly to select “SERVER” as the
input source.
The browse screen is displayed on the TV.
RADIO
VOLUME
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
• To return to the previous screen, press RETURN.
Cursor keys
ENTER
RETURN
• Files not supported by the unit cannot be selected.
• If the unit detects a series of unsupported files (such as images and hidden
files) during playback, playback stops automatically.
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
• If playback of a music file selected from the unit is ongoing on your PC, the
playback screen is displayed.
ENHANCER PURE DIRECT
1
2
3
5
6
7
4
8
9
0
MEMORY
ENT
2
Use the cursor keys to select a music server and
press ENTER.
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS)
En
70
■ Browse screen
HDMI
1
2
3
1
2
3
4
5
V-AUX
AV
1
2
3
5
6
1
TUNER
USB
NET
■ Playback screen
4
1
2
AUDIO
MAIN
PARTY
ZONE 2
HDMI OUT
4
SCENE
BD
DVD
TV
3
5
2
NET
RADIO
1 Status indicators
1 Status indicators
PROGRAM
MUTE
TOP MENU
VOLUME
Display the current shuffle/repeat settings (p.72) and playback status
(such as play/pause).
3 Contents list
RETURN
DISPLAY
BAND
Menu operation keys
Cursor keys
ENTER
RETURN
MODE
TUNING
External device
operation keys
PRESET
SUR. DECODE STRAIGHT
MUSIC
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
3
4
5
6
7
8
9
Displays the artist name, album name, song title, and elapsed time.
Use the cursor keys to select scrollable information.
OPTION
ENTER
MOVIE
2 Playback information
2 List name
POP-UP/MENU
ON
SCREEN
0
MEMORY
ENT
Displays the list of PC content. Use the cursor keys to select an item and
press ENTER to confirm the selection.
3 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
4 Item number/total
5 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Menu
Display the current shuffle/repeat settings (p.72) and playback status
(such as play/pause).
Menu
Function
1 Page Up
Moves to the previous/next page of the list.
Play Control
1 Page Down
Submenu
Function
a
Resumes playback from pause.
s
Stops playback.
d
Stops playback temporarily.
f
10 Pages Up
g
Moves 10 pages forward/backward.
Skips forward/backward.
10 Pages Down
Return
Returns to the higher-level list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation
keys to redisplay it.
• You can also use the external device operation keys (a, s, d, f, g) on
the remote control to control playback.
• You can also use a DLNA-compatible Digital Media Controller (DMC) to control
playback. For details, see “DMC Control” (p.92).
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS)
En
71
■ Shuffle/repeat settings
You can configure the shuffle/repeat settings for the playback of PC
music content.
HDMI
1
2
3
4
5
V-AUX
AV
1
2
3
5
6
1
4
AUDIO
TUNER
MAIN
USB
1
When “SERVER” is selected as the input source,
press OPTION.
2
Use the cursor keys to select “Shuffle” (Shuffle) or
“Repeat” (Repeat) and press ENTER.
2
NET
PARTY
ZONE 2
HDMI OUT
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
RADIO
• To return to the previous screen during menu operations, press RETURN.
VOLUME
• Text in parentheses denotes indicators on the front display.
TOP MENU
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
PRESET
OPTION
Cursor keys
ENTER
RETURN
3
Use the cursor keys (e/r) to select a setting.
Item
Shuffle
(Shuffle)
Setting
Function
Off (Off)
Turns off the shuffle function.
On (On)
Plays back songs in the current album
(folder) in random order.
“x” appears on the TV screen.
Off (Off)
Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
“c” appears on the TV screen.
All (All)
Plays back all songs in the current album
(folder) repeatedly.
“v” appears on the TV screen.
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
ENHANCER PURE DIRECT
Repeat
(Repeat)
4
To exit from the menu, press OPTION.
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS)
En
72
Listening to Internet radio
HDMI
1
2
3
4
5
You can listen to Internet radio stations from all over the world.
V-AUX
Playback of Internet radio
AV
1
2
3
5
6
1
4
TUNER
USB
NET
AUDIO
MAIN
PARTY
ZONE 2
2
NET
HDMI OUT
• To use this function, the unit must be connected to the Internet (p.30). You can
check whether the network parameters (such as the IP address) are properly
assigned to the unit in “Network” (p.115) in the “Information” menu.
1
The browse screen is displayed on the TV.
• You may not be able to receive some Internet radio stations.
SCENE
BD
DVD
TV
NET
Press NET repeatedly to select “NET RADIO” as the
input source.
• The unit uses the vTuner Internet radio station database service.
RADIO
• This service may be discontinued without notice.
PROGRAM
MUTE
TOP MENU
VOLUME
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
5
6
7
8
9
0
MEMORY
ENT
ENHANCER PURE DIRECT
3
Cursor keys
ENTER
RETURN
2
Use the cursor keys to select an item and press
ENTER.
If an Internet radio station is selected, playback starts and
the playback screen is displayed.
4
• To return to the previous screen, press RETURN.
PLAYBACK ➤
Listening to Internet radio
En
73
■ Browse screen
HDMI
1
2
3
1
2
3
4
5
V-AUX
AV
1
2
3
5
6
1
TUNER
USB
NET
■ Playback screen
4
1
2
AUDIO
MAIN
PARTY
ZONE 2
HDMI OUT
4
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
RETURN
DISPLAY
BAND
Menu operation keys
Cursor keys
ENTER
RETURN
MODE
TUNING
External device
operation keys
PRESET
SUR. DECODE STRAIGHT
2 List name
2 Playback information
4 Item number/total
5 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Menu
Function
Bookmark On
(Bookmark Off)
Adds/removes the station selected in the list to/from
the “Bookmarks” folder (p.75).
MUSIC
ENHANCER PURE DIRECT
INFO
1 Playback indicator
Displays the list of Internet radio content. Use the cursor keys to select an
item and press ENTER to confirm the selection.
OPTION
ENTER
1 Playback indicator
3 Contents list
POP-UP/MENU
ON
SCREEN
MOVIE
3
5
2
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
1 Page Up
Moves to the previous/next page of the list.
Displays the station name, album name, song title, and elapsed time.
Use the cursor keys (q/w) to select scrollable information.
3 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
Menu
Play Control
Moves 10 pages forward/backward.
10 Pages Down
Return
Returns to the higher-level list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
Function
Adds the current station to the
“Bookmarks” folder (p.75).
Bookmark On
s
Stops playback.
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu
operation keys to redisplay it.
1 Page Down
10 Pages Up
Submenu
• You can also use the external device operation key (s) on the remote control to
stop playback.
• Some information may not be available depending on the station.
PLAYBACK ➤
Listening to Internet radio
En
74
Registering favorite Internet radio stations (bookmarks)
HDMI
1
2
3
By registering your favorite Internet radio stations to “Bookmarks”,
you can quickly access to them from the “Bookmarks” folder in the
browse screen.
4
5
V-AUX
AV
1
2
3
5
6
1
4
TUNER
USB
NET
3
AUDIO
MAIN
PARTY
ZONE 2
2
■ Registering the station on the
browse/playback screen
HDMI OUT
Access the vTuner website
(http://yradio.vtuner.com/) with the web browser on
your PC and enter the vTuner ID.
You can switch the language.
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
1
Select the desired Internet radio station in the
browse screen or start playback of it to display the
playback screen.
2
Press the cursor key (r) to select “Bookmark On”
and press ENTER.
VOLUME
POP-UP/MENU
ON
SCREEN
OPTION
The selected station is added to the “Bookmarks” folder.
Cursor keys
ENTER
ENTER
RETURN
Enter the vTuner ID in this area.
DISPLAY
BAND
• To remove stations from the “Bookmarks” folder, select the station in the
“Bookmarks” folder and then “Bookmark Off”.
MODE
TUNING
PRESET
• To use this feature, you need to create your personal account. Create your
account using your e-mail address.
SUR. DECODE STRAIGHT
MOVIE
MUSIC
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
■ Registering the station on the vTuner
website
1
Select any of Internet radio stations on the unit.
This operation is necessary to register the radio station for
the first time.
2
Check the vTuner ID of the unit.
4
Register your favorite radio stations.
Click the “Add” icon (❤+) next to the station name.
• To remove the station from the “Bookmarks” folder, select “Bookmarks” in
the Home screen, and then click the “Remove” icon (❤–) next to the station
name.
You can find the vTuner ID (MAC address of the unit) in
“Network” (p.115) in the “Information” menu.
PLAYBACK ➤
Listening to Internet radio
En
75
Playing back music with AirPlay
The AirPlay function allows you to play back iTunes/iPod music on the unit via network.
iTunes
Playback of iTunes/iPod music contents
Follow the procedure below to play back iTunes/iPod music contents on the unit.
PC
1
Router
The unit
Turn on the unit, and start iTunes on the PC or display the playback
screen on the iPod.
If the iTunes/iPod recognizes the unit, the AirPlay icon (
iTunes (example)
(wired or
wireless)
) appears.
iPod (example)
iPhone/iPad/
iPod touch
• If the icon does not appear, check whether the unit and PC/iPod are connected to the router properly.
• To use this function, the unit and your PC or iPod must be connected to the same router. You can check
whether the network parameters (such as the IP address) are properly assigned to the unit in “Network”
(p.115) in the “Information” menu.
2
• When using a multiple SSID router, access to the unit might be restricted depending on the SSID to
connect. Connect the iPod to the SSID which can access the unit.
On the iTunes/iPod, click (tap) the AirPlay icon and select the unit
(network name of the unit) as the audio output device.
iTunes (example)
iPod (example)
• For details on supported iPod devices, see “Supported devices and file formats” (p.131).
Network name of the unit
3
Select a song and start playback.
The unit automatically selects “AirPlay” as the input source and starts playback.
The playback screen is displayed on the TV.
• The playback screen is available only when your TV is connected to the unit via HDMI.
• You can turn on the unit automatically when starting playback on iTunes or iPod by setting “Network
Standby” (p.108) in the “Setup” menu to “On”.
PLAYBACK ➤
Playing back music with AirPlay
En
76
• You can edit the network name (the unit’s name on the network) displayed on
iTunes/iPod in “Network Name” (p.109) in the “Setup” menu.
• If you select the other input source on the unit during playback, playback on the
iTunes/iPod stops automatically.
HDMI
1
2
3
4
5
• You can adjust the unit’s volume from the iTunes/iPod during playback. To disable
volume controls from iTunes/iPod, set “Volume Interlock” (p.92) in the “Input” menu
to “Off”.
V-AUX
AV
1
2
3
5
6
1
4
AUDIO
TUNER
MAIN
USB
TV
NET
PROGRAM
MUTE
Function
a
Resumes playback from pause.
d
Stops playback temporarily.
f
g
HDMI OUT
• When you use iTunes/iPod controls to adjust volume, the volume may be
unexpectedly loud. This could result in damage to the unit or speakers. If the
volume suddenly increases during playback, stop playback on the iTunes/iPod
immediately.
RADIO
VOLUME
Skips forward/backward.
Closes the screen display and shows the
background. Press one of the menu operation
keys to redisplay it.
Screen Off
• You can also use the external device operation keys (a, s, d, f, g) on
the remote control to control playback.
■ Playback screen
TOP MENU
Submenu
Caution
SCENE
BD
DVD
Play Control
2
NET
PARTY
ZONE 2
Menu
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
BAND
Menu operation keys
Cursor keys
ENTER
RETURN
1
2
• To control iTunes playback with the remote control of the unit, you need to
configure the iTunes preferences to enable iTunes control from remote speakers
in advance.
3
iTunes (example of English version)
MODE
TUNING
External device
operation keys
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
ENHANCER PURE DIRECT
1 Playback indicator
2 Playback information
Displays the artist name, album name, song title, and elapsed/remaining
time.
Use the cursor keys (q/w) to select scrollable information.
3 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
Check this box
PLAYBACK ➤
Playing back music with AirPlay
En
77
Playing back music in multiple rooms (multi-zone)
The multi-zone function allows you to play back different input sources in the room
where the unit is installed (Main zone) and in another room (Zone2).
Preparing Zone2
For example, while you are watching TV in the living room (Main zone), another person
can listen to radio in the study room (Zone2).
Connect the device that will be used in Zone2 to the unit. The connection method varies
depending on the amplifier being used (the unit or an external amplifier).
Caution
• Remove the unit’s power cable from the AC wall outlet before connecting
speakers or an external amplifier.
• Ensure that the core wires of the speaker cable do not touch one another or
come into contact with the unit’s metal parts. Doing so may damage the unit
or the speakers. If the speaker cables short circuit, “Check SP Wires” will
appear on the front display when the unit is turned on.
Study room (Zone2)
Living room (Main zone)
• Analog audio sources (including FM/AM radio), and USB and network sources can be output to Zone2. To
listen to the playback of an external device in Zone2, you need to connect the device to the AUDIO jacks
(AV 5–6 or AUDIO 1–2 jacks) of the unit.
• (RX-V777 only)
The party mode (p.82) allows you to play back the same audio output in Main zone as Zone2, whatever the
input audio signal type.
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
78
■ Using the unit’s internal amplifier
■ Using an external amplifier
Connect the speakers placed in Zone2 to the unit with speaker cables.
Connect the external amplifier (with volume control) placed in Zone2 to the unit with a
stereo pin cable.
To utilize the EXTRA SP terminals for Zone2 speakers, set “Power Amp Assign” (p.100)
in the “Setup” menu to “7ch +1ZONE” after connecting the power cable to an AC wall
outlet.
The unit (rear)
DC OUT
5V 0.5A
HDMI 1
HDMI OUT
2
EXTRA SP
ZONE2/F.PRESENCE
HDMI 2
(BD/DVD)
1
ARC
PTICAL
VIDEO
(TV)
AV4
The unit (rear)
ANTENNA
CO
(RADIO)
AM
OAXIAL
FM
AV3
SPEAKERS
FRONT
CENTER
Y
SURROUND
ZONE2 OUT jacks
PR
PB
SURROUND BACK/BI-AMP
AV2
VIDEO
VIDEO
PTICAL
AV 1
SINGLE
MONITOR
COMPONENT VIDEO
L
R
AUDIO 1
AUDIO 2
ZONE 2
AV 5
AV 6
AV OUT
F
ZONE OUT
External amplifier
Audio input
(analog stereo)
ZONE 2
ZONE OUT
1
2
FL
FR
L
9
3
Q
W
R
1
4
2
AUDIO
5
9
6
3
7
Zone2
4
5
6
7
Zone2
Main zone
• When Zone2 output is enabled (p.81), the surround back speakers in the main zone do not output sound.
Main zone
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
79
■ Operating the unit from Zone2 (remote connection)
You can operate the unit or external devices from Zone2 using the remote control
supplied with each device if you connect an infrared signal receiver/emitter to the unit’s
REMOTE IN/OUT jacks.
Remote connections between Yamaha products
An infrared signal transmitter is not required if you are using Yamaha products that
support remote connections, as the unit does. You can transmit remote control signals
by connecting the REMOTE IN/OUT jacks with monaural mini-jack cables and an
infrared signal receiver.
REMOTE IN/OUT jacks
• (RX-V777 [China, Korea, U.K. and Europe models] only)
You can operate external devices with the supplied remote control if you register a remote control code for
each device. For details, refer to “Supplement for Remote Control” on the supplied CD-ROM.
REMOTE IN/OUT jacks
DC OUT
5V 0.5A
IN
HDMI 1
HDMI OUT
OUT
2
IN
OUT
OUT
REMOTE
REMOTE
Infrared signal
receiver
IN
TRIGGER OUT
12V 0.1A
REMOTE IN/OUT jacks
IN
HD
(BD/DVD)
1
ARC
OUT
Yamaha products
(up to six, including the unit)
REMOTE
REMOTE
OPTICAL
VIDEO
(TV)
AV4
ANTENNA
(RADIO)
AM
COAXIAL
AV3
Y
PR
PB
AV2
VIDEO
OPTICAL
AV 1
Remote control
COMPONENT VIDEO
AUDIO 2
AUDIO 1
AV 5
AV 6
Zone2
AV OUT
The unit (rear)
Infrared signal
transmitter
Infrared signal
receiver
External device
(such as a CD player)
Remote control
(supplied with each device)
Zone2
Main zone
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
80
z
Controlling Zone2
4
HDMI
1
2
3
4
5
V-AUX
AV
1
2
3
4
5
6
1
AUDIO
TUNER
MAIN
USB
2
NET
PARTY
ZONE 2
AV 5–6
AUDIO 1–2
TUNER
USB
NET
1
2
HDMI OUT
MAIN/ZONE2
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
MUTE
VOLUME
Set MAIN/ZONE2 to “ZONE2”.
Refer to the instruction manual for the external device.
Press z (receiver power).
For details on the following operations, see the
corresponding pages.
Each time you press the key, Zone2 output is enabled or
disabled.
• Listening to FM/AM radio (p.58)
• Playing back iPod music (p.63)
When Zone2 output is enabled, “ZONE2” lights up in the
front display.
SCENE
BD
DVD
3
• Playing back music stored on a USB storage device
(p.66)
Use the following keys to select an input source.
AV 5–6: AV 5–6 (AUDIO) jacks
• Playing back music stored on media servers (PCs/NAS)
(p.69)
AUDIO 1–2: AUDIO 1–2 jacks
• Listening to Internet radio (p.73)
TUNER: FM/AM radio
• Playing back music with AirPlay (p.76)
POP-UP/MENU
ON
SCREEN
Start playback on the external device or select a
radio station.
OPTION
ENTER
USB: USB jack (on the front panel)
RETURN
NET: NETWORK sources (press repeatedly to select a
desired network source)
DISPLAY
BAND
MODE
TUNING
PRESET
PHONO: PHONO jacks (RX-V777 only [except for U.S.A.
and Canada models])
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
• The on-screen operations are not available for Zone2. Use the front display
or web control (p.83) to control Zone2.
ENHANCER PURE DIRECT
• AirPlay is available in Zone2 only when AirPlay playback is ongoing in the
main zone.
SLEEP
• You cannot select USB and network sources exclusively for each zone. For
example, if you select “SERVER” for Zone2 when “USB” is selected for the
main zone, the input source for the main zone also switches to “SERVER”.
• To set the sleep timer (120 min, 90 min, 60 min, 30 min, off), press SLEEP
repeatedly. The Zone2 output will be disabled after a specified period of
time.
• To adjust the Zone2 volume, press VOLUME or MUTE (when using the
unit’s internal amplifier). When using an external amplifier, use the volume
control on it.
Caution
• To avoid unexpected noise, never play back DTS-CDs in Zone2.
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
81
■ Enjoying the same source in multiple
rooms (party mode)
HDMI
1
2
3
4
(RX-V777 only)
5
V-AUX
AV
1
2
3
4
AUDIO
5
6
1
TUNER
USB
NET
MAIN
PARTY
ZONE 2
2
HDMI OUT
PARTY
The party mode allows you to play back in Zone2 the same music
that is being played back in the main zone. During the party mode,
stereo playback is automatically selected for all zones. Utilize this
function when you want to use main zone music as background
music for a house party.
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
POP-UP/MENU
ON
SCREEN
1
Press PARTY.
Each time you press the key, the party mode is turned on or
off.
When the party mode is turned on, “PARTY” lights up in the
front display.
OPTION
ENTER
RETURN
DISPLAY
• If the party mode does not work on Zone2, set “Party Mode Set” (p.110) in
the “Setup” menu to “Enable” (default).
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
5
6
7
8
9
0
MEMORY
ENT
ENHANCER PURE DIRECT
4
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
82
Controlling the unit from a web browser (web control)
You can control the unit with the web control screen displayed in a web browser.
Web browser
• You can check the IP address of the unit in “Network” (p.115) in the “Information” menu.
• You can bookmark the unit’s IP address in the browser or create a shortcut link (p.85) to access the
web control screen quickly in the future. However, if you are using a DHCP server, the IP address of
the unit may change each time the unit is turned on.
Web control
• If you have enabled the MAC address filter (p.108), you need to specify the MAC address of your PC
to allow the PC to access the unit. For information on how to check the MAC address of your PC,
refer to its instruction manual.
Web control
• If you are using Windows 8, we recommend you start Internet Explorer in the following way.
PC
Router
The unit
– Select “Desktop” in the Start screen and click the Internet Explorer icon at the bottom left of the
screen.
• By using the application for smartphone/tablet “AV CONTROLLER”, you can control the unit from an
iPhone, iPad, iPod touch or Android devices. Visit the Yamaha website for details.
• To use this function, the unit and your PC must be connected to the same router.
• Some security software installed on your PC may block the access of the unit to your PC. In these
cases, configure the security software appropriately.
• To display the web control screen or turn on the unit from the web control when the unit is in standby
mode, set “Network Standby” (p.85) to “On”.
• We recommend using one of the following web browsers.
– Internet Explorer 9.x, 10.x or 11.x
– Safari 6.x
1
2
Start the web browser.
Enter the IP address of the unit in the address bar of the web browser.
(Example)
PLAYBACK ➤ Controlling the unit from a web browser (web control)
En
83
■ Top menu screen
■ Control screen
3
1
5
1
6
2
3
4
Moves to the control screen for the selected zone.
2 STATUS
Turns on/off the power for each zone or displays the input source and volume set for each zone.
3 SETTINGS
Moves to the settings screen.
4 PARTY MODE
(RX-V777 only)
Turns on/off the party mode (p.82).
5 SYSTEM POWER
Turns on/off the power for all zones.
6 MAIN VOLUME
Adjusts the volume or mutes the audio output for the main zone. You can also select the
increments used for volume adjustment.
7 RELOAD
Reloads the current status of the unit.
5
7
1 CONTROL
4
2
6
1 PLAY INFO
Selects an input source or controls playback for the selected zone.
2 TOP MENU
Moves to the top menu screen.
3 SCENE
Selects a scene for the selected zone.
4 POWER
Turns on/off the power for the selected zone.
5 VOLUME
Adjusts the volume or mutes the audio output for the selected zone. You can also select the
increments used for volume adjustment.
6 RELOAD
Reloads the current status of the unit.
• Multi-zone volume adjustment is not available when an external amplifier is used.
PLAYBACK ➤ Controlling the unit from a web browser (web control)
En
84
■ Settings screen
Note
• If the network settings are changed, you may need to restart the browser or regain access to the unit.
• When using the MAC address filter, make sure you specify the MAC addresses of your network
devices correctly. Otherwise, the unit will be inaccessible from your network devices such as PCs and
other external devices.
1
• Do not operate the unit during the recovery process, as this may result in the incorrect recovery of the
settings. When the recovery finishes, click “OK” to set the unit to standby mode.
• The backup does not contain user information (such as user account and password) or unit-specific
information (such as MAC address and IP address).
• Some characters entered with a PC may not appear correctly on the unit.
2
3
1 Rename
Edits the network name (the unit’s name on the network) (p.109) or the name of each zone
(p.109). Click “APPLY” to apply the changes to the unit.
Network
Selects the network connection method (p.107) or configures the network parameters (such as
IP address) (p.107). Click “APPLY” to apply the changes to the unit.
MAC Filter
Sets the MAC address filter (p.108) to limit access to the unit from the network devices. Click
“APPLY” to apply the changes to the unit.
Auto Reload
Enables/disables automatic reloading. When “Auto Reload” is “On” (enabled), the web control
screen reloads the status of the unit every 5 seconds.
Network Standby
Enables/disables the network standby function (p.108).
Backup/Recovery
Creates a backup of the unit’s settings on the PC or restores the settings from the backup.
Firmware Update
Updates the firmware of the unit by using the firmware you have downloaded on the PC.
Follow the on-screen instructions to start the firmware update.
Create Link
Creates a shortcut link to the desired control screen.
Tips
Displays tips for use of the web control.
2 BACK
Moves to the top menu screen.
3 RELOAD
Reloads the current status of the unit.
PLAYBACK ➤ Controlling the unit from a web browser (web control)
En
85
Viewing the current status
HDMI
1
2
3
4
5
V-AUX
Switching information on the front display
AV
1
2
3
4
Input source group
Item
NET RADIO
Song (song title), Album (album name), Station
(station name), DSP Program (sound mode name),
Audio Decoder (decoder name*)
PHONO
(RX-V777 only [except for U.S.A. and Canada
models])
Input (input source name), DSP Program (sound
mode name), Audio Decoder (decoder name*)
AUDIO
5
6
1
TUNER
USB
NET
MAIN
PARTY
ZONE 2
2
1
HDMI OUT
Press INFO.
Each time you press the key, the displayed item changes.
SCENE
BD
DVD
TV
NET
RADIO
VOL.
PROGRAM
MUTE
Audio Decoder
VOLUME
SL
L C R
SW
SR
* The name of the audio decoder currently activated is displayed. If no audio
decoder is activated, “Decoder Off” appears.
Item name
TOP MENU
About 3 seconds later, the corresponding information for
the displayed item appears.
POP-UP/MENU
ON
SCREEN
OPTION
Viewing the status information on the TV
ENTER
VOL.
RETURN
DISPLAY
†‡Pro Logic
DISPLAY
BAND
MODE
TUNING
SL
L C R
SW
SR
1
The following information is displayed on the TV.
Information
PRESET
Press DISPLAY.
Compressed Music Enhancer status
SUR. DECODE STRAIGHT
MOVIE
MUSIC
ENHANCER PURE DIRECT
INFO
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
ENT
• Available items vary depending on the selected input source. The displayed
item can also be applied separately to each input source group.
Input source group
Item
HDMI 1–5
V-AUX
AV 1–6
AUDIO 1–2
Input (input source name), DSP Program (sound
mode name), Audio Decoder (decoder name*)
Frequency (frequency), DSP Program (sound mode
name), Audio Decoder (decoder name*)
TUNER
USB
SERVER
AirPlay
Input source/
Party mode
status*
Volume/
YPAO
Volume
status
Audio format/
Decoder
Sound
mode
CINEMA DSP status
* (U.K. and Europe models only)
Radio Data System data is also available when the unit is
tuned into a Radio Data System broadcasting station (p.60).
Song (song title), Artist (artist name), Album (album
name), DSP Program (sound mode name), Audio
Decoder (decoder name*)
* RX-V777 only
2
To close the information display, press DISPLAY.
* During simple playback of iPod:
Input (input source name), DSP Program (sound mode
name), Audio Decoder (decoder name*)
PLAYBACK ➤ Viewing the current status
En
86
Configuring playback settings for different playback sources (Option menu)
You can configure separate playback settings for different playback sources. This
menu is available on the front panel (or on the TV screen), allowing you to easily
configure settings during playback.
1
Press OPTION.
Option menu items
• Available items vary depending on the selected input source.
• Text in parentheses denotes indicators on the front display.
• Default settings are underlined.
VOL.
Tone Control
L C R
SL
SW
SR
SBL
SBR
Front display
Item
Function
Tone Control
(Tone Control)
Adjusts the high-frequency range and low-frequency
range of sounds.
88
Enables/disables YPAO Volume.
88
Sets whether the dynamic range (from maximum to
minimum) is automatically adjusted when the volume
is adjusted.
88
YPAO Volume
(YPAO Vol.)
YPAO Volume
(YPAO Volume) Adaptive DRC
(A.DRC)
Dialogue
(Dialog)
TV screen
2
Use the cursor keys to select an item and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
3
4
Use the cursor keys (e/r) to select a setting.
To exit from the menu, press OPTION.
Page
Dialogue Level
Adjusts the volume of dialogue sounds.
(Dialog Lvl)
88
Dialogue Lift
(Dialog Lift)
88
Adjusts the perceived height of dialogue sounds.
Subwoofer Trim
Fine-adjusts the subwoofer volume.
Subwoofer/Bass (SW.Trim)
(Subwoofer/Bass) Extra Bass
Enables/disables Extra Bass.
(Extra Bass)
89
89
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer.
89
Video Processing
(Video Process.)
Enables/disables the video signal processing
settings configured in the “Setup” menu.
89
Corrects volume differences between input sources.
89
Selects a video to be output with the audio input
source.
89
FM Mode
(FM Mode)
Switches between stereo and monaural for FM radio
reception.
89
Traffic Program
(TrafficProgram)
(U.K. and Europe models only)
Automatically searches for a traffic information station.
60
Shuffle
(Shuffle)
Configures the shuffle setting for the iPod (p.65),
USB storage device (p.68), or media server (p.72).
—
Repeat
(Repeat)
Configures the repeat setting for the iPod (p.65),
USB storage device (p.68), or media server (p.72).
—
Input Trim
Input Settings (In.Trim)
(Input Settings) Video Out
(V.Out)
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
En
87
■ Tone Control (Tone Control)
Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.
Adaptive DRC (A.DRC)
Choices
Treble (Treble), Bass (Bass)
Sets whether the dynamic range (from maximum to minimum) is automatically
adjusted when the volume level is adjusted. When it is set to “On”, it is useful for
listening to playback at a low volume at night.
Setting range
-6.0 dB to Bypass (Bypass) to +6.0 dB, *0.5 dB increments
Settings
Off (Off)
The dynamic range is not automatically adjusted.
On (On)
Automatically adjusts the dynamic range when YPAO Volume is
enabled.
• If you set an extreme value, sounds may not match those from other channels.
If “On” is selected, the dynamic range becomes narrow at a low volume and wide
at a high volume.
Adjusting with the front panel controls
a Press TONE CONTROL to select “Treble” or “Bass”.
Output level
■ YPAO Volume (YPAO Volume)
Enables/disables YPAO Volume or Adaptive DRC.
On
Off
Volume: high
Output level
Volume: low
b Press PROGRAM to make an adjustment.
Input level
YPAO Volume (YPAO Vol.)
Enables/disables YPAO Volume. When YPAO Volume is enabled, the high- and
low-frequency levels are automatically adjusted according to the volume so that
you can enjoy natural sounds even at low volume.
On
Off
Input level
■ Dialogue (Dialog)
Adjusts the volume or perceive height of dialogue sounds.
Dialogue Level (Dialog Lvl)
Settings
Off (Off)
Disables YPAO Volume.
On (On)
Enables YPAO Volume.
Adjusts the volume of dialogue sounds. If dialogue sounds cannot be heard
clearly, you can turn up its volume by increasing this setting.
Setting range
0 to 3
• YPAO Volume works effectively after the measurement results of “Auto Setup” have been already saved
(p.34).
• We recommend enabling both YPAO Volume and Adaptive DRC when you are listening at lower volumes or
at night.
Dialogue Lift (Dialog Lift)
Adjusts the perceived height of dialogue sounds. If the dialogue sounds as if it is
coming from below the TV screen, you can raise its perceived height by increasing
this setting.
• This setting is available only when one of the following conditions is met.
– One of the sound programs (except for 2ch Stereo and 7ch Stereo) is selected when presence
speakers are used.
– Virtual Presence Speaker (VPS) (p.53) is working.
(You may hear dialogue sounds from the surround speakers depending on the listening position.)
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
En
88
■ Video Processing (Video Process.)
Setting range
0 to 5 (The bigger the value the higher the position)
Enables/disables the video signal processing (resolution and aspect ratio) settings
configured in “Processing” (p.105) in the “Setup” menu.
Settings
Direct (Direct)
Ideal position
Disables the video signal processing.
Processing (Processing) Enables the video signal processing.
■ Input Settings (Input Settings)
Configures the input settings.
■ Subwoofer/Bass (Subwoofer/Bass)
Adjust the subwoofer volume or bass sound.
• This setting is applied separately to each input source.
Subwoofer Trim (SW.Trim)
Input Trim (In.Trim)
Fine-adjusts the subwoofer volume.
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
Setting range
-6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)
Setting range
-6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)
Extra Bass (Extra Bass)
Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy
enhanced bass sounds, regardless of the size of the front speakers and the
presence or absence of the subwoofer.
Video Out (V.Out)
Selects a video to be output with the audio input source.
Settings
Settings
Off (Off)
Disables Extra Bass.
On (On)
Enables Extra Bass.
Off (Off)
HDMI 1–5 (HDMI1–5),
AV 1–6 (AV1–6),
Outputs video input through the corresponding video input jacks.
V-AUX (V-AUX),
USB (USB)
■ Enhancer (Enhancer)
Default
USB: USB (USB)
Others: Off (Off)
Enables/disables Compressed Music Enhancer (p.57).
• This setting is applied separately to each input source.
• You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer (p.57).
Settings
Does not output video.
• “USB” is selectable only when “USB” is selected as the input source.
Off (Off)
Disables Compressed Music Enhancer.
■ FM Mode (FM Mode)
On (On)
Enables Compressed Music Enhancer.
Switches between stereo and monaural for FM radio reception.
Settings
Default
TUNER, USB, (network sources): On (On)
Others: Off (Off)
Stereo (Stereo)
Receives FM radio in stereo sounds.
Mono (Mono)
Receives FM radio in monaural sounds.
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
En
89
CONFIGURATIONS
Configuring input sources (Input menu)
4
Use the cursor keys (q/w) to select an item and press ENTER.
You can change the input source settings using the TV screen.
1
2
Press ON SCREEN.
Use the cursor keys to select “Input” and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
3
5
6
Use the cursor keys (e/r) to select an input source to be configured
and press the cursor key (q).
Use the cursor keys to select a setting and press ENTER.
To exit from the menu, press ON SCREEN.
Input menu items
• Available items vary depending on the selected input source.
• Default settings are underlined.
The input source of the unit also changes.
Item
Function
Rename/Icon Select
Changes the input source name and icon.
91
Audio In
Combines the video jack of the selected input source with an
audio jack of others.
91
Decoder Mode
Sets the format of digital audio playback to DTS.
91
Volume Interlock
Enables/disables volume controls from iTunes/iPod via
AirPlay.
92
DMC Control
Selects whether to allow a DLNA-compatible Digital Media
Controller (DMC) to control playback.
92
• You can still switch the input source by using cursor keys (e/r) after Step 3.
CONFIGURATIONS
Page
➤ Configuring input sources (Input menu)
En
90
■ Rename/Icon Select
■ Audio In
Changes the input source name and icon displayed on the front display or TV screen.
Combines the video jack of the selected input source with an audio jack of others. For
example, use this function in the following cases.
Input sources
HDMI 1–5, V-AUX, AV 1–6, AUDIO 1–2, USB, PHONO*
* RX-V777 only (except for U.S.A. and Canada models)
■ Setup procedure
1
• Connecting a playback device that supports HDMI video output, but not HDMI audio
output
• Connecting a playback device that has component video jacks and analog stereo
jacks (such as game consoles)
Use the cursor keys (e/r) to select a template and press the cursor key (w).
Input sources
HDMI 1–5, AV 1–2
■ Setup procedure
(To input audio through a digital optical jack)
Select “AV1” or “AV4” and connect the device to the unit’s corresponding audio jacks
with a digital optical cable.
(To input audio through a digital coaxial jack)
Select “AV2” or “AV3” and connect the device to the unit’s corresponding audio jacks
with a digital coaxial cable.
2
3
4
• You cannot change the template or icon for “USB” when an iPod is connected.
(To input audio through analog audio jacks)
Use the cursor keys (e/r) to select an icon and press the cursor key (w).
Select “AV5”, “AV6”, “AUDIO1”, or “AUDIO2”, and connect the device to the unit’s
corresponding audio jacks with a stereo pin cable.
Press ENTER to enter the name edit screen.
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry.
■ Decoder Mode
Sets the format of digital audio playback to “DTS”.
For example, if the unit does not detect DTS audio and outputs noise, set “Decoder
Mode” to “DTS”.
Input sources
HDMI 1–5, V-AUX, AV 1–4
Settings
Auto
Automatically selects an audio format to match the input audio signal.
DTS
Selects DTS only. (Other audio signals are not reproduced.)
• To clear the entry, select “CLEAR”.
5
Use the cursor keys to select “OK” and press ENTER.
• To restore the default setting, select “RESET”.
6
To exit from the menu, press ON SCREEN.
CONFIGURATIONS
➤ Configuring input sources (Input menu)
En
91
■ Volume Interlock
Enables/disables volume controls from iTunes/iPod via AirPlay.
Configuring the SCENE function (Scene menu)
You can change the settings of the SCENE function (p.51) using the TV screen.
Input sources
AirPlay
Settings
Off
Disables volume controls from iTunes/iPod.
Limited
Enables volume controls from iTunes/iPod within the limited range
(-80 dB to 0 dB and mute).
Full
Enables volume controls from iTunes/iPod in the full range (-80 dB to
+16.5 dB and mute).
1
2
Press ON SCREEN.
3
Use the cursor keys (e/r) to select a scene to be configured and
press the cursor key (q).
Use the cursor keys to select “Scene” and press ENTER.
■ DMC Control
Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control
playback.
Input source
SERVER
Settings
Disable
Does not allow DMCs to control playback.
Enable
Allows DMCs to control playback.
• A Digital Media Controller (DMC) is a device that can control other network devices through the network.
When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media
Player 12) on the same network.
• You can still switch the scene by using cursor keys (e/r) after Step 3.
CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu)
En
92
4
■ Load
Use the cursor keys (q/w) to select an item and press ENTER.
Loads the settings registered for the selected scene.
Select “DETAIL” to configure the SCENE link playback setting or view the scene
assignments.
Device Control
Recalls a selected scene and starts its playback on an external device connected
to the unit via HDMI. (SCENE link playback)
Settings
5
6
Off
Disables the SCENE link playback function.
HDMI Control
Enables SCENE link playback using HDMI Control signals. Select this
if an HDMI Control-compatible device (such as a BD/DVD player) is
connected to the unit via HDMI. It also turns on the TV if it supports
HDMI Control.
Use the cursor keys and ENTER to change the setting.
To exit from the menu, press ON SCREEN.
Default
SCENE1 (BD/DVD), SCENE2 (TV): HDMI Control
SCENE3 (NET), SCENE4 (RADIO): Off
Scene menu items
Item
Function
Save
Registers the current settings in the selected scene.
Page
93
Load
Loads the settings registered for the selected scene. You can
also configure the SCENE link playback setting or view the
scene assignments.
93
Rename/Icon Select
Changes the scene name and icon.
94
Reset
Restores the default settings for the selected scene.
94
■ Save
Registers the unit’s current settings (input source, sound program/surround decoder,
Compressed Music Enhancer on/off, and HDMI output jack [RX-V777 only]) in the
selected scene.
• To control playback of an HDMI Control-compatible device by SCENE link playback, you need to set
“HDMI Control” in the “Setup” menu to “On” and perform the HDMI Control link setup (p.134).
Detail
Displays the assignments of the selected scene.
Input
Input source to be used
HDMI Output
(RX-V777 only)
HDMI OUT jack to be used
Mode
Sound program/surround decoder to be used
Enhancer
Compressed Music Enhancer on/off
• If you have changed the input assignment for a scene, you also need to change the external device
assigned to the corresponding SCENE key (p.51).
CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu)
En
93
■ Rename/Icon Select
Changes the scene name and icon displayed on the front display or TV screen.
■ Setup procedure
1
2
3
Use the cursor keys (e/r) to select an icon and press the cursor key (w).
Configuring sound programs/surround
decoders (Sound Program menu)
You can change the settings of the sound programs and surround decoders using the
TV screen.
1
2
Press ON SCREEN.
3
Use the cursor keys (e/r) to select a sound program to be
configured and press the cursor key (q).
Use the cursor keys to select “Sound Program” and press ENTER.
Press ENTER to enter the name edit screen.
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the
entry.
• To clear the entry, select “CLEAR”.
4
Use the cursor keys to select “OK” and press ENTER.
• To restore the default setting, select “RESET”.
5
• You can still switch the sound program by using cursor keys (e/r) after Step 3.
To exit from the menu, press ON SCREEN.
■ Reset
Restores the default settings (p.51) for the selected scene.
CONFIGURATIONS ➤
Configuring sound programs/surround decoders (Sound Program menu)
En
94
4
Use the cursor keys (q/w) to select an item and press ENTER.
Sound Program menu items
• Available items vary depending on the selected sound program or surround decoder.
• Default settings are underlined.
■ Settings for sound programs
• To return to the previous screen during menu operations, press RETURN.
Item
Function
Decode Type
bPro Logic*, bPLIIx Movie
(bPLII Movie), bPLIIx
Music* (bPLII Music*),
Selects a surround decoder to be used bPLIIx Game* (bPLII
in combination with the selected sound Game*), Neo:6 Cinema,
Neo:6 Music*
program.
(* Available only when
“SURROUND DECODER” is
selected)
DSP Level
Adjusts the sound field effect level.
-6 dB to 0 dB to +3 dB
Higher to enhance the sound
field effect, and lower to
reduce it.
Initial Delay
Adjusts the delay between the direct
sound and presence sound field
generation.
1 ms to 99 ms
Higher to enhance the delay
effect, and lower to reduce it.
Surround Initial Delay
Adjusts the delay between the direct
sound and surround sound field
generation.
• To restore the default settings for the selected sound program, select “Reset”.
5
6
Use the cursor keys to select a setting and press ENTER.
To exit from the menu, press ON SCREEN.
Surround Back Initial
Delay
Adjusts the delay between the direct
sound and surround back sound field
generation.
Room Size
Adjusts the broadening effect of the
presence sound field.
Surround Room Size
Adjusts the broadening effect of the
surround sound field.
Surround Back Room
Size
Adjusts the broadening effect of the
surround back sound field.
Liveness
Adjusts the loss of the presence sound
field.
Surround Liveness
Adjusts the loss of the surround sound
field.
Surround Back
Liveness
Adjusts the loss of the surround back
sound field.
CONFIGURATIONS ➤
Settings
1 ms to 49 ms
Higher to enhance the delay
effect, and lower to reduce it.
0.1 to 2.0
Higher to enhance the
broadening effect, and lower
to reduce it.
0 to 10
Higher to enhance the
reflectivity, and lower to
reduce it.
Configuring sound programs/surround decoders (Sound Program menu)
En
95
■ Settings for decoders
Item
Function
Settings
Reverb Time
Adjust the decay time of the rear
reverberant sound.
1.0 s to 5.0 s
Higher to enrich the
reverberant sound and lower
to have clear sound.
Reverb Delay
Reverb Level
Adjusts the delay between the direct
sound and reverberant sound
generation.
0 ms to 250 ms
Higher to enhance the delay
effect, and lower to reduce it.
Adjusts the volume of the reverberant
sound.
0% to 100%
Higher to strengthen the
reverberant sound, and lower
to weaken it.
The following items are available when you set “Decode Type” of “SURROUND
DECODER” to “bPLIIx Music” or “Neo:6 Music”.
Decode Type
Function
2ch Stereo
Selects whether to
automatically bypass the
DSP circuit when an
analog audio source is
played back.
Direct
Function
Settings
Panorama
Adjusts the broadening
effect of the front sound
field.
Off, On
Select “On” to wrap front left/right
channel sounds around the field
and generate a spacious sound
field in combination with the
surround sound field.
Center Width
Adjusts the broadening
effect of the center
sound field.
0 to 3 to 7
Higher to enhance the broadening
effect, and lower to reduce it
(closer to center).
Dimension
Adjusts the difference in
level between the front
and surround sound
fields.
-3 to 0 to +3
Higher to strengthen the front
sound field and lower to strengthen
the surround sound field.
Center Image
Adjusts the center
orientation level
(broadening effect) of
the front sound field.
0.0 to 0.3 to 1.0
Higher to strengthen the center
orientation level (less broadening
effect) and lower to weaken (more
broadening effect).
bPLIIx Music
The following items are available when you select “2ch Stereo” or “7ch Stereo”.
Sound program Item
Item
Settings
Auto, Off
Level
Adjusts the entire volume. -5 to 0 to +5
Front / Rear Balance
Adjusts the front and rear
volume balance.
-5 to 0 to +5
Higher to enhance the front
side, and lower to enhance
the rear side.
Left / Right Balance
Adjusts the left and right
volume balance.
-5 to 0 to +5
Higher to enhance the right
side, and lower to enhance
the left side.
Height Balance
Adjust the height volume
balance using the
presence speakers.
0 to 5 to 10
Higher to enhance the
upside, and lower to
enhance the downside. (The
presence speakers do not
produce sounds when
“Height Balance” is set to
“0”.)
Monaural Mix
Enables/disables
monaural sound output.
Off, On
Neo:6 Music
7ch Stereo
• Available items in “7ch Stereo” vary depending on the speaker system being used.
CONFIGURATIONS ➤
Configuring sound programs/surround decoders (Sound Program menu)
En
96
Configuring various functions (Setup menu)
4
Use the cursor keys (q/w) to select an item and press ENTER.
You can configure the unit’s various function with the menu displayed on the TV screen.
1
2
Press ON SCREEN.
Use the cursor keys to select “Setup” and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
3
5
6
Use the cursor keys to select a setting and press ENTER.
To exit from the menu, press ON SCREEN.
Use the cursor keys (e/r) to select a menu.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
97
Setup menu items
Menu
Item
Function
Page
Automatically optimizes the speaker settings (YPAO).
34
Selects a speaker system.
100
Front
Selects the size of the front speakers.
100
Center
Selects whether or not a center speaker is connected and its size.
100
Surround
Selects whether or not surround speakers are connected and their size.
100
Surround Back
Selects whether or not surround back speakers are connected and their size.
101
Front Presence
Selects whether or not presence speakers are connected.
101
Subwoofer
Selects whether or not a subwoofer is connected and its phase.
101
Layout
Selects a surround speaker layout when surround speakers are used.
101
Bass Cross Over
Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”.
101
Auto Setup
Power Amp Assign
Configuration
Speaker
Manual Setup
Lipsync
Distance
Sets the distance between each speaker and listening position.
102
Level
Adjusts the volume of each speaker.
102
Parametric EQ
Adjusts the tone with an equalizer.
102
Test Tone
Enables/disables the test tone output.
103
Delay Enable
Enables/disables the Lipsync adjustment for each input source.
103
Auto/Manual Select
Selects the method to adjust the delay between video and audio output.
103
Adjusts the delay between video and audio output manually.
104
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
104
Max Volume
Sets the maximum volume to prevent excessive loudness.
104
Initial Volume
Sets the initial volume for when this receiver is turned on.
104
Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level when the volume is adjusted.
104
CINEMA DSP 3D Mode
Enables/disables CINEMA DSP 3D.
104
Adjustment
Sound
Extended Surround
Selects how to play back 5.1- to 7.1-channel sources when surround back speakers are used.
104
Video
Video Mode
Enables/disables the video signal processing (resolution and aspect ratio).
105
HDMI Control
Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input).
106
HDMI
Audio Output
Selects a device to output audio.
107
Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
107
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
98
Menu
Network
Item
Page
Network Connection
Selects the network connection method.
107
IP Address
Configures the network parameters (such as IP address).
107
Network Standby
Selects whether to enable/disable the function that turns on the unit from other network devices.
108
MAC Address Filter
Sets the MAC address filter to limit access to the unit from other network devices.
108
Network Name
Main Zone Set
Multi Zone
Function
Zone2 Set
Edits the network name (the unit’s name on the network) displayed on other network devices.
109
Zone Rename
Changes the zone name (for main zone) displayed on the TV screen.
109
Max Volume
Sets the Zone2 maximum volume to prevent excessive loudness in the second zone.
110
Initial Volume
Sets the Zone2 initial volume for when the unit is turned on.
110
Zone Rename
Changes the zone name (for Zone2) displayed on the TV screen.
110
(RX-V777 only)
Enables/disables switching to the party mode.
110
Dimmer (Front Display)
Adjusts the brightness of the front display.
110
Short Message
Selects whether to display short messages on the TV screen when the unit is operated.
110
Wallpaper
Selects the image to be used as wallpaper on the TV.
110
Trigger Mode
Specifies the condition for the TRIGGER OUT jack to function.
111
Target Zone
Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
111
Power Mode
Party Mode Set
Display Set
Function
Trigger Output
Selects how to supply power through the DC OUT jack.
111
Memory Guard
Prevents accidental changes to the settings.
112
Auto Power Standby
Sets the amount of time for the auto-standby function.
112
ECO Mode
Enables/disables the eco mode (power saving mode).
113
Select an on-screen menu language.
113
DC OUT
ECO
Language
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
99
Speaker (Manual Setup)
Configures the speaker settings manually.
Front
Selects the size of the front speakers.
Settings
• Default settings are underlined.
Large
Select this option for large speakers.
The front speakers will produce all of the front channel frequency
components.
Small
Select this option for small speakers.
The subwoofer will produce front channel low-frequency components
(configurable in “Bass Cross Over”).
• “Front” is automatically set to “Large” when “Subwoofer” is set to “None”.
Center
■ Power Amp Assign
Selects a speaker system.
In addition to the 5.1- or 7.1-channel speaker system, various speaker configurations
are possible using the presence speakers, Zone2 speakers, or bi-amp connection.
Settings
Basic
Select this option when you use a normal speaker system (not using
Zone2 speakers or a bi-amp connection).
7ch +1ZONE
Select this option when you use Zone2 speakers (p.79) in addition to
the speaker system in the main zone.
5ch BI-AMP
Select this option when you connect front speakers that support
bi-amp connections (p.21).
Selects whether or not a center speaker is connected and its size.
Settings
Large
Select this option for large speakers.
The center speaker will produce all of the center channel frequency
components.
Small
Select this option for small speakers.
The subwoofer or front speakers will produce center channel
low-frequency components (configurable in “Bass Cross Over”).
None
Select this option when no center speaker is connected.
The front speakers will produce center channel audio.
Surround
Selects whether or not surround speakers are connected and their sizes.
■ Configuration
Settings
Configures the output characteristics of the speakers.
Large
Select this option for large speakers.
The surround speakers will produce all of the surround channel
frequency components.
• When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm
(6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).
Small
Select this option for small speakers.
The subwoofer or front speakers will produce surround channel
low-frequency components (configurable in “Bass Cross Over”).
None
Select this option when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual
CINEMA DSP works when you select a sound program.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
100
Surround Back
Subwoofer
Selects whether or not surround back speakers are connected and their sizes.
Selects whether or not a subwoofer is connected and its phase.
Settings
Settings
Large x1
Select this option when one large speaker is connected.
The surround back speaker will produce all of the surround back
channel frequency components.
Large x2
Select this option when two large speakers are connected.
The surround back speakers will produce all of the surround back
channel frequency components.
Small x1
Select this option when one small speaker is connected.
The subwoofer or front speakers will produce surround back channel
low-frequency components (configurable in “Bass Cross Over”).
Small x2
Select this option when two small speakers are connected.
The subwoofer or front speakers will produce surround back channel
low-frequency components (configurable in “Bass Cross Over”).
None
Select this option when no surround back speakers are connected.
The surround speakers will produce surround back channel audio.
Normal
Select this option when a subwoofer is connected (phase not
reversed). The subwoofer will produce LFE (low-frequency effect)
channel audio and low-frequency components from other channels.
Reverse
Select this option when a subwoofer is connected (phase reversed).
The subwoofer will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
Use
None
Select this option when no subwoofer is connected. The front
speakers will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
• When the bass sound is lacking or unclear, switch the subwoofer phase.
Layout
Selects a surround speaker layout when surround speakers are used.
• This setting is not available in the following cases:
Choices
Surround
–“Power Amp Assign” is set to “5ch BI-AMP”
–“Surround” is set to “None”
–“Layout (Surround)” is set to “Front”
Front Presence
Settings
Rear
Select this option when surround speakers are placed on the rear side
of the room.
Front
Select this option when surround speakers are placed on the front
side of the room. Virtual CINEMA FRONT (p.55) works in this case.
Selects whether or not presence speakers are connected.
Settings
Use
Select this option when presence speakers are connected.
None
Select this option when no presence speakers are connected.
• This setting is not available when “Power Amp Assign” is set to “5ch BI-AMP” or “7ch +1ZONE”.
• This setting is not available when “Surround” is set to “None”.
Bass Cross Over
Sets the lower limit of the low-frequency components that can be output from a
speaker whose size is set to “Small”. A frequency sound lower than the specified
value will be produced from the subwoofer or front speakers
Settings
40 Hz, 60 Hz, 80 Hz, 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz
• If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
101
■ Distance
■ Manual equalizer adjustment
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from “Meter” or “Feet”.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Subwoofer
1
2
3
Press ENTER again to enter the edit screen.
Use the cursor keys to select a speaker and press ENTER.
• To restore the default settings for all speakers, select “PEQ Data Clear” and then “OK”.
Setting range
0.30 m to 3.00 m to 24.00 m (1.0 ft to 10.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments
• To copy the parametric equalizer values acquired with “Auto Setup” (p.34) to the “Manual” fields for
fine adjustment, select “PEQ Data Copy” and then an equalizer type.
4
■ Level
Set “Parametric EQ” to “Manual” and press ENTER.
Use the cursor keys (e/r) to select a center frequency from the 7 preset bands
and the cursor keys (q/w) to adjust the gain.
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Subwoofer
Setting range
-10.0 dB to 0.0 dB to +10.0 dB (0.5 dB increments)
■ Parametric EQ
Adjusts the tone with an equalizer.
Setting range
Gain: -20.0 dB to +6.0 dB
Settings
Manual
Select this option when you want to adjust the equalizer manually.
For details, see “Manual equalizer adjustment”.
YPAO:Flat
Adjusts individual speakers to achieve the same characteristics.
YPAO:Front
Adjusts individual speakers to achieve the same characteristics as
the front speakers.
YPAO:Natural
Adjusts all speakers to achieve a natural sound.
Through
Does not use the equalizer.
• “YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the measurement results of “Auto
Setup” have already been saved (p.34). Press ENTER again to view the measurement results.
5
To fine-adjust the center frequency or Q factor (bandwidth), press ENTER
repeatedly to select an item.
Frequency: Use the cursor keys (e/r) to adjust the center frequency of the selected
band and the cursor keys (q/w) to adjust the gain.
Q: Use the cursor keys (e/r) to adjust the Q factor (bandwidth) of the selected band and
the cursor keys (q/w) to adjust the gain.
Setting range
Center frequency: 31.3 HZ to 16.0 kHz
Q factor: 0.500 to 10.080
6
To exit from the menu, press ON SCREEN.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
102
■ Test Tone
Sound
Enables/disables the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
Configures the audio output settings.
Settings
Off
Does not output test tones.
On
Outputs test tones automatically when you adjust the speaker balance
or equalizer.
■ Lipsync
Adjusts the delay between video and audio output.
Delay Enable
Enables/disables the Lipsync adjustment for each input source.
Choices
HDMI 1–5, AV 1–6, V-AUX, AUDIO 1–2
Settings
Disable
Disable the Lipsync adjustment for the selected input source.
Enable
Enables the Lipsync adjustment for the selected input source.
Auto/Manual Select
Selects the method to adjust the delay between video and audio output.
Setting range
Auto
Adjusts the delay between video and audio output automatically when
a TV that supports an automatic lipsync function is connected to the
unit via HDMI.
If necessary, you can fine-adjust the audio output timing in “Adjustment”.
Manual
Select this option when you want to adjust the delay between video
and audio output manually.
Adjust the audio output timing in “Adjustment”.
• Even if “Auto/Manual Select” is set to “Auto”, the automatic adjustment does not work depending on
the TV connected to the unit. In this case, adjust the delay manually in “Adjustment”.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
103
■ Adaptive DSP Level
Adjustment
Adjusts the delay between video and audio output manually when “Auto/Manual
Select” is set to “Manual”. You can fine-adjust the audio output timing when
“Auto/Manual Select” is set to “Auto”.
Setting range
0 ms to 500 ms (1 ms increments)
• “Offset” shows the difference between automatic adjustment and fine adjustment.
■ Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Settings
Selects whether to automatically adjust the CINEMA DSP effect level when the volume
is adjusted.
Settings
Off
Does not adjust the effect level automatically.
On
Adjusts the effect level automatically.
■ CINEMA DSP 3D Mode
Enables/disables CINEMA DSP 3D (p.53). If this function is set to “On”, CINEMA DSP
3D functions with the selected sound programs (except 2ch Stereo and 7ch Stereo).
Settings
On
Enables CINEMA DSP 3D.
Off
Disables CINEMA DSP 3D.
Maximum
Produces audio without adjusting the dynamic range.
Standard
Optimizes the dynamic range for regular home use.
■ Extended Surround
Minimum/Auto
Sets the dynamic range for clear sound even at night or at low
volumes.
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
Selects how to play back 5.1- to 7.1-channel sources when surround back speakers
are used.
■ Max Volume
Settings
Auto
Automatically selects the most suitable decoder if signals that contain
surround back channel signals are input, and reproduces the signals
in 6.1- or 7.1-channel. If two surround back speakers are connected,
the unit reproduces the 5.1-channel signals in 7.1-channel.
bPLIIx Movie
Always reproduces signals in 7.1-channel using the Dolby Pro Logic
IIx Movie decoder. This setting is available only when two surround
back speakers are connected.
bPLIIx Music
Always reproduces signals in 6.1- or 7.1-channel using the Dolby Pro
Logic IIx Music decoder. This setting is available only when one or two
surround back speakers are connected.
EX/ES
Automatically selects the Dolby EX or DTS-ES decoder, and
reproduces signals in 6.1- or 7.1-channel.
Off
Always reproduces signals in their original channels. (Even when
DTS-ES or Dolby Digital Surround EX signal is input, the unit
reproduces the signal in 5.1-channel.)
Sets the maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
■ Initial Volume
Sets the initial volume when the receiver is turned on.
Settings
Off
Sets the level to the volume level of the unit when it last entered
standby mode.
On
Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB
increments).
(This setting works only when the initial volume is set lower than “Max
Volume”.)
• Some early Dolby Digital Surround EX or DTS-ES sources do not contain a flag for reproducing surround
back channel. We recommend you set “Extended Surround” to “bPLIIx Movie” or “EX/ES” when playing
back those sources.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
104
Video
Aspect
Configures the video output settings.
Selects an aspect ratio to output HDMI video signals when “Video Mode” is set to
“Processing”.
Settings
Through
Does not convert the aspect ratio.
16:9 Normal
Outputs 4:3 video signals to a 16:9 TV with black bands on either side
of the screen.
• This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i,
1080p, or 2160p (4K) signals.
■ Video Mode
Enables/disables the video signal processing (resolution and aspect ratio).
Settings
Direct
Disables the video signal processing.
Processing
Enables the video signal processing.
Select a resolution and an aspect ratio in “Resolution” and “Aspect”.
• When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to
reduce video output delay.
• When “Video Mode” is set to “Processing” and the resolution is being converted, short messages are not
displayed on the TV screen.
Resolution
Selects a resolution to output HDMI video signals when “Video Mode” is set to
“Processing”.
Settings
Through
Does not convert the resolution.
Auto
Selects a resolution automatically in accordance with TV resolution.
480p/576p, 720p,
1080i, 1080p, 4K
Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)
• If you need to select a resolution that is not supported by your TV, set “MON.CHK” (p.117) in the
“ADVANCED SETUP” menu to “SKIP” and try again. (Note that the output video may not be
displayed on your TV normally.)
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
105
HDMI
ARC
Configures the HDMI settings.
Enables/disables ARC (p.135) when “HDMI Control” is set to “On”.
Settings
Off
Disables ARC.
On
Enables ARC.
• You do not need to change this setting normally. In case noises are produced from the speakers
connected to the unit because TV audio signals input to the unit via ARC are not supported by the
unit, set “ARC” to “Off” and use the TV’s speakers.
Standby Sync
■ HDMI Control
Enables/disables HDMI Control (p.134).
Settings
Select whether to use HDMI control to link the standby behavior of the TV and the
unit when “HDMI Control” is set to “On”.
Settings
Off
Disables HDMI Control.
On
Enables HDMI Control.
Configure the settings in “TV Audio Input”, “ARC” and “Standby
Sync”.
Off
Does not set the unit to standby mode when the TV is turned off.
On
Sets the unit to standby mode when the TV is turned off.
Auto
Sets the unit to standby mode when the TV is turned off only when the
unit is receiving TV audio or HDMI signals.
• To use HDMI control, you need to perform the HDMI Control link setup (p.134) after connecting HDMI
Control-compatible devices.
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input when “HDMI
Control” is set to “On”. The unit’s input source automatically switches to TV audio
when the TV input is switched to its built-in tuner.
Settings
AV 1–6, AUDIO 1–2
Default
AV 4
• When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for
connecting an external device because the input will be used for TV audio input.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
106
■ Audio Output
Network
Selects a device to output audio.
Configures the network settings.
• This setting (except for “HDMI OUT2” [RX-V777 only]) is available only when “HDMI Control” is set to “Off”.
Amp
Enables/disables the audio output from the speakers connected to the unit.
Settings
Off
Disables the audio output from the speakers.
On
Enables the audio output from the speakers.
HDMI OUT1, HDMI OUT2 (RX-V777 only)
HDMI OUT (RX-V677 only)
Enables/disables the audio output from a TV connected to the HDMI OUT jack.
Settings
Off
Disables the audio output from the TV.
On
Enables the audio output from the TV.
■ Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when the
unit is in standby mode. If this function is set to “On”, you can use the input selection
keys (HDMI 1–5, V-AUX) to select an HDMI input even when the unit is in standby mode
(the standby indicator on the unit blinks).
Settings
■ Network Connection
Selects the network connection method.
Settings
Wired
Select this option when you want to connect the unit to a network with
a commercially-available network cable (p.30)
Wireless (Wi-Fi)
Select this option when you want to connect the unit to a network via
the wireless router (access point). For details on settings, see
“Connecting the unit to a wireless network” (p.43).
Wireless Direct
Select this option when you want to connect a mobile device to the
unit directly. For details on settings, see “Connecting a mobile device
to the unit directly (Wireless Direct)” (p.48).
■ IP Address
Configures the network parameters (such as IP address).
DHCP
Off
Does not output videos/audio to the TV.
On
Outputs videos/audio to the TV.
(The unit consumes more power than when “Off” is selected.)
• This setting is available only when “HDMI Control” is set to “Off”.
Select whether to use a DHCP server.
Settings
Off
Does not use a DHCP server. Configure the network parameters
manually. For details, see “Manual network settings”.
On
Uses a DHCP server to automatically obtain the unit’s network
parameters (such as IP address).
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
107
■ Manual network settings
1
2
Set “DHCP” to “Off”.
Use the cursor keys (q/w) to select a parameter type and press ENTER.
IP Address
Specifies an IP address.
Subnet Mask
Specifies a subnet mask.
Default Gateway
Specifies the IP address of the default gateway.
DNS Server (P)
Specifies the IP address of the primary DNS server.
DNS Server (S)
Specifies the IP address of the secondary DNS server.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys
(q/w) to select a value.
4
5
6
7
To confirm the setting, press ENTER.
To configure another network parameter, repeat steps 2 to 4.
To save the changes, use the cursor keys to select “OK” and press ENTER.
To exit from the menu, press ON SCREEN.
■ Network Standby
Selects whether the unit can be turned on from other network devices (network
standby).
Settings
Off
Disables the network standby function.
On
Enables the network standby function.
(The unit consumes more power than when “Off” is selected.)
■ MAC Address Filter
Sets the MAC address filter to limit access to the unit from other network devices.
Filter
Enables/disables the MAC address filter.
Settings
Off
Disables the MAC address filter.
On
Enables the MAC address filter. In “MAC Address 1–10”, specify the
MAC addresses of the network devices that will be permitted access
to the unit.
• AirPlay (p.76) and DMC (p.92) operations are not subject to the MAC address filter.
MAC Address 1–10
Specifies the MAC addresses (up to 10) of the network devices that will be
permitted access to the unit when “Filter” is set to “On”.
■ Procedure
1
Use the cursor keys (q/w) to select “MAC Address 1–5” or “MAC Address
6–10” and press ENTER.
2
Use the cursor keys (q/w) to select an MAC address number and press
ENTER.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys
(q/w) to select a value.
4
5
6
To confirm the setting, press ENTER.
To save the changes, use the cursor keys to select “OK” and press ENTER.
To exit from the menu, press ON SCREEN.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
108
■ Network Name
Multi Zone
Edits the network name (the unit’s name on the network) displayed on other network
devices.
Configures the multi zone settings.
■ Procedure
1
2
Press ENTER to enter the name edit screen.
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the
entry.
■ Main Zone Set
Configures the main zone setting.
Zone Rename
Changes the zone name (for main zone) displayed on the TV screen.
• To clear the entry, select “CLEAR”.
3
Use the cursor keys to select “OK” and press ENTER.
■ Procedure
1
2
Press ENTER to enter the name edit screen.
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the
entry.
• To restore the default setting, select “RESET”.
4
To exit from the menu, press ON SCREEN.
• To clear the entry, select “CLEAR”.
3
Use the cursor keys to select “OK” and press ENTER.
• To restore the default setting, select “RESET”.
4
To exit from the menu, press ON SCREEN.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
109
■ Zone2 Set
Function
Configures the Zone2 settings.
Configures the functions that make the unit easier to use.
Max Volume
Sets the Zone2 maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
• This setting is available only when “Power Amp Assign” (p.100) is set to “7ch +1ZONE”.
Initial Volume
Sets the Zone2 initial volume for when the unit is turned on.
■ Display Set
Settings
Configures the settings related to the front display and TV screen display.
Off
On
Sets the level at the volume level of the unit when it last entered standby
mode.
Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB
increments).
(This setting works only when the initial volume is set lower than “Max Volume”.)
• This setting is available only when “Power Amp Assign” (p.100) is set to “7ch +1ZONE”.
Dimmer (Front Display)
Adjusts the brightness of the front display.
Setting range
-4 to 0 (higher to brighten)
• The front display may become dark when “ECO Mode” (p.113) is set to “On”.
Zone Rename
Short Message
Changes the zone name (for Zone2) displayed on the TV screen.
Selects whether to display short messages on the TV screen when the unit is
operated (such as input selection and volume adjustment).
You can change the zone name in the same manner as “Zone Rename” in “Main
Zone Set” (p.109).
■ Party Mode Set
(RX-V777 only)
Settings
On
Displays short messages on the TV screen.
Off
Does not display short messages on the TV screen.
Enables/disables switching to the party mode (p.82).
Wallpaper
Choice
Target: Zone 2
Selects the image to be used as wallpaper on the TV.
Settings
Settings
Disable
Disables switching to the party mode.
Enable
Enables switching to the party mode. You can turn on/off the party
mode by pressing PARTY on the remote control.
Picture 1, Picture 2,
Picture 3
Displays the selected image on the TV screen when there is no video
signal.
Gray
Displays a gray background on the TV screen when there is no video
signal.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
110
■ Trigger Output
Sets the TRIGGER OUT jack to function in sync with the power status of each zone or
input switching.
Target Zone
Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
Settings
Trigger Mode
Specifies the condition for the TRIGGER OUT jack to function.
Main
When “Trigger Mode” is set to “Power,” electronic signal transmission
is synchronized with the power status of the main zone.
When “Trigger Mode” is set to “Source,” electronic signal transmission
is synchronized with the input switching in the main zone.
Zone2
When “Trigger Mode” is set to “Power,” electronic signal transmission
is synchronized with the power status of Zone2.
When “Trigger Mode” is set to “Source,” electronic signal transmission
is synchronized with the input switching in Zone2.
All
When “Trigger Mode” is set to “Power,” electronic signal transmission
is synchronized with the power status of the main zone or Zone2.
When “Trigger Mode” is set to “Source,” electronic signal transmission
is synchronized with the input switching in the main zone or Zone2.
Settings
Power
The TRIGGER OUT jack functions in sync with the power status of the
zone specified with “Target Zone.”
Source
The TRIGGER OUT jack functions in sync with the input switching in
the zone specified with “Target Zone.”
An electronic signal is transmitted according to the setting made in
“Source.”
Manual
Select this to manually switch the output level for electronic signal
transmission with “Manual.”
Source
Specifies the output level of the electronic signal transmitted with each input,
switching when “Trigger Mode” is set to “Source”.
Choices
HDMI 1–5, AV 1–6, V-AUX, AUDIO 1–2, TUNER, PHONO*, (network sources), USB
* RX-V777 only (except for U.S.A. and Canada models)
Settings
■ DC OUT
Configures the DC OUT jack setting.
Power Mode
Selects how to supply power to the Yamaha AV accessory connected to the DC
OUT jack.
Settings
Low
Stops the electronic signal transmission when you switch to the input
source specified in this option.
High
Transmits the electronic signal when you switch to the input source
specified in this option.
Manual
Continuous
Supplies power through the DC OUT jack continuously regardless of
the power state (on/standby) of the unit.
Main Zone Power
Sync.
Supplies power through the DC OUT jack only when the main zone is
turned on.
(This setting may not work properly on some accessories.)
Switches the output level for electronic signal transmission manually when “Trigger
Mode” is set to “Manual”. This setting can also be used to confirm proper function
of the external device connected via the TRIGGER OUT jack.
Choices
Low
Stops the electronic signal transmission.
High
Transmits the electronic signal.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
111
■ Memory Guard
ECO
Prevents accidental changes to the settings.
Configures the power supply settings.
Settings
Off
Does not protect the settings.
On
Protects the settings until “Off” is selected.
• When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen.
Icon
■ Auto Power Standby
Sets the amount of time for the auto-standby function. If you do not operate the unit or if
no input signals are detected for the specified time, the unit will automatically go into
standby mode.
Settings
Off
Does not set the unit to standby mode automatically.
20 Minutes
Sets the unit to standby mode when you have not operated the unit
and no input signals are detected (or the unit is muted) for 20 minutes.
2 Hours, 4 Hours,
8 Hours, 12 Hours
Sets the unit to standby mode when you have not operated the unit for
the specified time. For example, when “2 Hours” is selected, the unit
will switch to standby mode if you do not operate it for 2 hours.
Default
U.K. and Europe models: 20 Minutes
Other models: Off
• Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the
front display.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
112
■ ECO Mode
Language
Enables/disables the eco (power saving) mode.
When the eco mode is enabled, you can reduce the unit’s power consumption.
Select an on-screen menu language.
Settings
Off
Disables the eco mode.
On
Enables the eco mode.
• The new setting will take effect after the unit is restarted.
• When “ECO Mode” is set to “On”, the front panel display may become dark.
• If you want to play audio at high volume, set “ECO Mode” to “Off”.
Settings
English
English
日本語
Japanese
Français
French
Deutsch
German
Español
Spanish
Russian
Italiano
Italian
Chinese
• The information on the front display is provided in English only.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
113
Viewing information about the unit
(Information menu)
You can view information about the unit using the TV screen.
1
2
Types of information
■ Audio Signal
Displays information about the current audio signal.
Press ON SCREEN.
Format
Audio format of the input signal
Use the cursor keys to select “Information” and press ENTER.
Channel
The number of source channels in the input signal
(front/surround/LFE)
For example, “5.1 (3/2/0.1)” means 5.1ch in total
(3 front channels, 2 surround channels, and LFE).
Input
Sampling
The number of samples per second of the input digital signal
Bitrate
The amount of data per second of the input bitstream signal
Dialogue
Output
3
The dialogue normalization level of the input bitstream signal
The speaker terminals from which signals are output
• Even when the unit is set to output bitstream signals directly, the signal may be converted depending on the
specifications and settings of the playback device.
Use the cursor keys (e/r) to select an information type.
■ Video Signal
Displays information about the current video signal.
HDMI Signal
Presence or absence of HDMI signal input/output
HDMI Resolution
Resolutions of input signal (analog or HDMI) and output signal (HDMI)
Analog Resolution
Resolutions of input signal (analog) and signal output at the MONITOR OUT
jacks (analog)
■ HDMI Monitor
4
To exit from the menu, press ON SCREEN.
Displays information about the TVs connected to the HDMI OUT jacks.
Interface
TV interface
Video Resolution
Resolutions supported by the TV
• (RX-V777 only)
Use the cursor keys (q/w) to switch between “OUT1” and “OUT2”.
CONFIGURATIONS
➤ Viewing information about the unit (Information menu)
En
114
■ Network
■ System
Displays the network information on the unit.
Displays the system information on the unit.
(When using wired or wireless [Wi-Fi] network connection)
Remote ID
The unit’s remote control ID setting (p.116)
IP address
TV Format
The unit’s video signal type (p.117)
Subnet Mask
Subnet mask
Speaker Impedance
The speaker impedance setting of the unit (p.116)
Default Gateway
The IP address of the default gateway
Tuner Freq. Step
(Asia and General models only)
The FM/AM tuning frequency setting of the unit (p.117)
DNS Server (P)
The IP address of the primary DNS server
DNS Server (S)
The IP address of the secondary DNS server
IP Address
MAC Address
MAC address
Network Name
Network name (the unit’s name on the network)
Wired/Wireless
The status of the wired or wireless connection
SSID
(When using wireless [Wi-Fi] network connection)
The SSID of the wireless network
(When using Wireless Direct)
SSID
The SSID of the wireless network
Security
Security method
Security Key
Security key
IP Address
IP address
Subnet Mask
Subnet mask
MAC Address
MAC address
Network Connection
“Wireless Direct” indication
System ID
System ID number
Firmware Version
The version of firmware installed on the unit
• If the unit detects a newer firmware over the network, “!” (exclamation mark) appears at the upper right of
the “Information” and “System” icons, and the corresponding message will be displayed in this screen. You
can update the unit’s firmware by pressing ENTER in this screen and following the procedure in “Updating
the unit’s firmware via the network” (p.119).
■ Multi Zone
Displays information about Zone2.
Input
The input source selected for Zone2
Volume
The volume setting for Zone2
CONFIGURATIONS
➤ Viewing information about the unit (Information menu)
En
115
Changing the speaker impedance setting (SP IMP.)
Configuring the system settings
(ADVANCED SETUP menu)
SP IMP.••8¬MIN
Configure the system settings of the unit while viewing the front display.
1
2
Change the unit’s speaker impedance settings depending on the impedance of the
speakers connected.
Set the unit to standby mode.
Settings
While holding down STRAIGHT on the front panel, press MAIN ZONE z.
MAIN ZONE z
PROGRAM
3
4
5
6  MIN
Select this option when you connect 6-ohm speakers to the unit. You
can also use 4-ohm speakers as the front speakers.
8  MIN
Select this option when you connect 8-ohm or higher speakers to the
unit.
Selecting the remote control ID (REMOTE ID)
STRAIGHT
Press PROGRAM to select an item.
REMOTE ID••ID1
Press STRAIGHT to select a setting.
Press MAIN ZONE z to set the unit to standby mode and turn it on again.
The new settings take effect.
Change the unit’s remote control ID so that it matches the remote control’s ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with a
unique remote control ID for its corresponding receiver.
Settings
ID1, ID2
ADVANCED SETUP menu items
■ Changing the remote control ID of the remote control
1
• Default settings are underlined.
Item
Function
Page
SP IMP.
Changes the speaker impedance setting.
116
REMOTE ID
Selects the unit’s remote control ID.
116
TU
(Asia and General models only)
Changes the FM/AM tuning frequency setting.
117
TV FORMAT
Switches the video signal type.
117
MON.CHK
Removes the limitation on HDMI video output.
117
INIT
Restores the default settings.
117
UPDATE
Updates the firmware.
118
VERSION
Checks the version of firmware currently installed on the unit.
118
To select ID1, hold down the cursor key (e) and SCENE (BD/DVD) together for
3 seconds.
To select ID2, hold down the cursor key (e) and SCENE (TV) together for
3 seconds.
CONFIGURATIONS ➤
Configuring the system settings (ADVANCED SETUP menu)
En
116
Changing the FM/AM tuning frequency setting (TU)
(Asia and General models only)
TU••••FM50/AM9
Change the FM/AM tuning frequency setting of the unit depending on your country or
region.
Settings
FM100/AM10
Select this when you want to adjust the FM frequency by 100-kHz
steps and AM by 10-kHz steps.
FM50/AM9
Select this when you want to adjust the FM frequency by 50-kHz steps
and AM by 9-kHz steps.
Switching the video signal type (TV FORMAT)
TV FORMAT•NTSC
Removing the limitation on HDMI video output
(MON.CHK)
MON.CHK••••YES
The unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jack.
Disable the monitor check function if you want to specify a resolution in “Resolution”
(p.105) when the unit cannot detect the TV’s resolution or when you want to specify a
different resolution than the detected resolution.
Settings
YES
Enables the monitor check function. (Outputs video signals with a
resolution supported by the TV only.)
SKIP
Disables the monitor check function. (Outputs video signals with a
specified resolution regardless of compatibility with the TV.)
• Reset to “YES” if the unit becomes inoperable because video from the unit cannot be displayed on the TV
after “MON.CHK” has been set to “SKIP”.
Switch the video signal type of the unit so that it matches to the format of your TV.
Settings
NTSC, PAL
Default
U.S.A., Canada, Korea and General models: NTSC
Other models: PAL
Restoring the default settings (INIT)
INIT••••CANCEL
Restores the default settings for the unit.
Choices
VIDEO
Restores the default settings for video configurations.
ALL
Restores the default settings for the unit.
CANCEL
Does not perform an initialization.
CONFIGURATIONS ➤
Configuring the system settings (ADVANCED SETUP menu)
En
117
Updating the firmware (UPDATE)
UPDATE•••••USB
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from the Yamaha website. If the unit
is connected to the Internet, you can download the firmware via the network. For
details, refer to the information supplied with updates.
■ Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select “USB” or “NETWORK” and press INFO to
start firmware update.
Choices
USB
Update the firmware using a USB memory device.
NETWORK
Update the firmware via the network.
• If the unit detects newer firmware over the network, the corresponding message will be displayed after
ON SCREEN is pressed. In this case, you can also update the unit’s firmware by following the procedure in
“Updating the unit’s firmware via the network” (p.119).
Checking the firmware version (VERSION)
VERSION••xx.xx
Check the version of firmware currently installed on the unit.
• You can also check the firmware version in “System” (p.115) in the “Information” menu.
• It may take a while until the firmware version is displayed.
CONFIGURATIONS ➤
Configuring the system settings (ADVANCED SETUP menu)
En
118
Updating the unit’s firmware via the network
HDMI
1
2
3
4
5
New firmware that provides additional features or product
improvements will be released as needed. If the unit is connected
to the Internet, you can download the firmware via the network and
update it.
V-AUX
AV
1
2
3
4
AUDIO
5
6
1
TUNER
USB
NET
MAIN
PARTY
ZONE 2
2
BD
DVD
TV
NET
PROGRAM
MUTE
Note
RADIO
• Do not operate the unit or disconnect the power cable or network cable during
firmware update. Firmware update takes about 20 minutes or more
(depending on your Internet connection speed).
TOP MENU
• If the unit is connected to the wireless network, network update may not be
possible depending on the condition of the wireless connection. In this case,
update the firmware using the USB memory device (p.118).
VOLUME
• If you want to update the firmware later, select “CLOSE” in Step 2. “!” (exclamation
mark) appears at the upper right of the “Information” and “System” icons, and a
message will be displayed in the “System” screen (p.115). You can update the
unit’s firmware by pressing ENTER in the “System” screen.
• For details on update, visit the Yamaha website.
POP-UP/MENU
ON
SCREEN
If “Update Success Please Power Off!” appears on
the front display, press MAIN ZONE z on the front
panel.
The firmware update is complete.
HDMI OUT
SCENE
3
OPTION
Cursor keys
ENTER
ENTER
RETURN
DISPLAY
• You can also update the firmware using the USB memory device from the
“ADVANCED SETUP” menu (p.118).
Information
icon
BAND
A firmware update is available if the following message is displayed
after ON SCREEN is pressed.
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
5
6
7
8
9
0
MEMORY
ENT
ENHANCER PURE DIRECT
4
Message
System Icon
1
2
Read the on-screen description.
To start the firmware update, use the cursor keys to
select “START” and press ENTER.
The on-screen display turns off.
CONFIGURATIONS ➤
Updating the unit’s firmware via the network
En
119
APPENDIX
Frequently asked questions
The new speaker system does not provide an ideal sound
balance...
If you have changed speakers or have a new speaker system, use “Auto Setup” to
optimize the speaker settings again (p.34). If you want to adjust the speaker settings
manually, use “Manual Setup” in the “Setup” menu (p.100).
Since we have small children, we want to set limitations on the
volume control...
If a small child accidentally operates the controls on the main unit or remote control, the
volume may suddenly increase. This may also cause injury or damage the unit or
speakers. We recommend using “Max Volume” in the “Setup” menu to set the maximum
volume level for the unit in advance (p.104). You can also set the maximum volume for
Zone2 (p.110).
I am occasionally startled by a sudden loud sound when turning
on the unit...
By default, the volume level when the unit last entered standby mode is automatically
applied. If you want to fix the volume, use “Initial Volume” in the “Setup” menu to set the
volume to be applied when the receiver is turned on (p.104). You can also set the initial
volume for Zone2 (p.110).
We are bothered by volume differences when switching
between input sources…
enable HDMI Control on each device and perform the HDMI Control link setup. This
setup is required every time you add a new HDMI Control-compatible device to your
system. For information on how HDMI Control works between your TV and playback
devices, refer to the instruction manuals for each device.
I want to turn off the on-screen messages displayed during
operations...
By default, short messages are displayed on the TV screen when the unit is operated
(such as input selection and volume adjustment). If the short messages bother you
when you are watching movies or sports, configure “Short Message” (p.110) in the
“Setup” menu to turn off the short messages.
I want to prevent accidental changes to the settings...
You can protect the settings configured on the unit (such as speaker settings) by
utilizing “Memory Guard” in the “Setup” menu (p.112).
The unit’s remote control is simultaneously controlling another
Yamaha product as well as the unit...
When using multiple Yamaha products, the remote control may work on another
Yamaha product or another remote control may work on the unit. If this happens,
register different remote control IDs for the devices that you want to control with each
remote control (p.116).
You can correct volume differences between input sources by utilizing “Input Trim” in
the “Option” menu (p.89).
I want to enjoy videos/audio played back on the video device
even when the unit is in standby mode…
I made HDMI connections but HDMI Control does not work at
all...
If you have connected a video device to the unit with HDMI, you can output
videos/audio played back on the video device to the TV even when the unit is in
standby mode. To use this function, set “Standby Through” (p.107) in the “Setup” menu
to “On”. You can also switch the input source using the remote control of the unit when
this function is enabled.
To use HDMI Control, you need to perform the HDMI Control link setup (p.134). After
connecting HDMI Control-compatible devices (such as BD/DVD players) to the unit,
APPENDIX
➤ Frequently asked questions
En
120
Troubleshooting
Refer to the table below when the unit does not function properly.
If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.
First, check the following:
a The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets
securely.
b The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned on.
c The connectors of each cable are securely inserted in to jacks on each device.
Power, system and remote control
Problem
Cause
Remedy
The power does not turn on.
The protection circuitry has been activated three times
consecutively. When the unit is in this condition, the standby
indicator on the unit blinks if you try to turn on the power.
As a safety precaution, capability to turn on the power is disabled. Contact your
nearest Yamaha dealer or service center to request repair.
The power does not turn off.
The internal microcomputer has frozen, due to an external electric
shock (such as lightning or excessive static electricity) or to a drop
in the power supply voltage.
Hold down MAIN ZONE z on the front panel for more than 10 seconds to
initialize and reboot the unit. (If the problem persists, disconnect the power cable
from the AC wall outlet and plug it again.)
The power turns off (standby mode) immediately.
The unit was turned on while a speaker cable was shorted.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers (p.20).
The sleep timer worked.
Turn on the unit and start playback again.
The auto-standby function kicked in because the unit was not used
for the specified time.
To disable the auto-standby function, set “Auto Power Standby” in the “Setup”
menu to “Off” (p.112).
The speaker impedance setting is incorrect.
Set the speaker impedance to match your speakers (p.116).
The protection circuitry has been activated because of a short
circuit.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers (p.20).
The internal microcomputer is frozen, due to an external electric
shock (such as lightning or excessive static electricity) or to a drop
in the power supply voltage.
Hold down MAIN ZONE z on the front panel for more than 10 seconds to
initialize and reboot the unit. (If the problem persists, disconnect the power cable
from the AC wall outlet and plug it again.)
The unit enters standby mode automatically.
The unit is not reacting.
APPENDIX ➤ Troubleshooting
En
121
Problem
The unit cannot be controlled using the remote
control.
The MHL-compatible mobile device cannot be
controlled using the remote control.
Cause
Remedy
The unit is out of the operating range.
Use the remote control within the operating range (p.5).
The batteries are weak.
Replace with new batteries.
The unit’s remote control sensor is exposed to direct sunlight or
strong lighting.
Adjust the lighting angle, or reposition the unit.
(RX-V777 [China, Korea, U.K. and Europe models] only)
The remote control is set to control external devices.
Press RECEIVER to set the remote control to control the unit (the key lights up in
orange).
The remote control IDs of the unit and the remote control are not
identical.
Change the remote control ID of the unit or the remote control (p.116).
The mobile device or its application is not externally controllable.
Directly operate the mobile device itself.
Cause
Remedy
Audio
Problem
No sound.
Another input source is selected.
Select an appropriate input source with the input selection keys.
Signals that the unit cannot reproduce are being input.
Some digital audio formats cannot be played back on the unit. To check the audio
format of the input signal, use “Audio Signal” in the “Information” menu (p.114).
The cable connecting the unit and playback device is defective.
If there is no problem with the connection, replace with another cable.
The maximum volume is set.
Use “Max Volume” in the “Setup” menu to adjust the maximum volume (p.104).
A device connected to the output jacks of the unit is not turned on.
Turn on all devices connected to the output jacks of the unit.
The playback source does not contain a signal for the channel.
To check it, use “Audio Signal” in the “Information” menu (p.114).
The currently selected sound program/decoder does not use the
speaker.
To check it, use “Test Tone” in the “Setup” menu (p.103).
Audio output of the speaker is disabled.
Perform “Auto Setup” (p.34) or use “Configuration” in the “Setup” menu to change
the speaker settings (p.100).
The volume of the speaker is set too low.
Perform “Auto Setup” (p.34) or use “Level” in the “Setup” menu to adjust the
speaker volume (p.102).
The speaker cable connecting the unit and the speaker is
defective.
If there is no problem with the connection, replace with another speaker cable.
The speaker is malfunctioning.
To check it, replace with another speaker. If the problem persists, the unit may be
malfunctioning.
The extended surround is disabled.
Use “Extended Surround” in the “Setup” menu to select a decoder to be used
(p.104).
The volume cannot be increased.
No sound is coming from a specific speaker.
No sound is coming from the surround back
speaker.
APPENDIX ➤ Troubleshooting
En
122
Problem
No sound is coming from the subwoofer.
No sound from the playback device (connected to
the unit with HDMI).
No sound from the TV (when HDMI Control is
used).
Only the front speakers work on multichannel
audio.
Cause
Remedy
The playback source does not contain LFE or low-frequency
signals.
To check if the subwoofer is working properly, use “Test Tone” in the “Setup” menu
(p.103).
Subwoofer output is disabled.
Perform “Auto Setup” (p.34) or set “Subwoofer” in the “Setup” menu to “Use”
(p.101).
The volume of the subwoofer is too low.
Adjust the volume on the subwoofer.
The subwoofer has been turned off by its auto-standby function.
Disable the auto-standby function of the subwoofer or adjust its sensitivity level.
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
The unit is set not to output audio input through HDMI jacks from
the SPEAKERS terminals.
In “Audio Output” in the “Setup” menu, set “Amp” to “On” (p.107).
The number of devices connected to the HDMI OUT jack exceeds
the limit.
Disconnect some of the HDMI devices.
The TV is set to output audio from the TV speakers.
Change the audio output setting on your TV so that the TV audio is output from the
speakers connected to the unit.
A TV that does not support ARC is connected to the unit only with
an HDMI cable.
Use a digital optical cable to make an audio connection (p.23).
(If the TV is connected to the unit with an audio cable)
The TV audio input setting does not match the actual connection.
Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack
(p.106).
(If you are trying to use ARC)
ARC is disabled on the unit or TV.
Set “ARC” in the “Setup” menu to “On” (p.106). Also, enable ARC on the TV.
The playback device is set to output 2-channel audio (such as
PCM) only.
To check it, use “Audio Signal” in the “Information” menu (p.114). If necessary,
change the digital audio output setting on the playback device.
The unit is too close to another digital or radio frequency device.
Move the unit further away from the device.
The cable connecting the unit and playback device is defective.
If there is no problem with the connection, replace with another cable.
Noise/hum is heard.
The volume of the unit is too high.
Turn down the volume. If “ECO Mode” is set to “On”, set it to “Off” (p.113).
A device connected to the unit’s output jacks is not turned on.
Turn on all devices connected to the unit’s output jacks.
The sound is distorted.
APPENDIX ➤ Troubleshooting
En
123
Video
Problem
No video.
No video from the playback device (connected to
the unit with HDMI).
Cause
Remedy
Another input source is selected on the unit.
Select an appropriate input source with the input selection keys.
Another input source is selected on the TV.
Switch the TV input to display the video from the unit.
The video signal output from the unit is not supported by the TV.
Set “MON.CHK” in the “ADVANCED SETUP” menu to “YES” (p.117).
The cable connecting the unit and TV (or playback device) is
defective.
If there is no problem with the connection, replace with another cable.
The input video signal (resolution) is not supported by the unit.
To check the information about the current video signal (resolution), use “Video
Signal” in the “Information” menu (p.114). For information about video signals
supported by the unit, see “HDMI signal compatibility” (p.136).
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
The number of devices connected to the HDMI OUT jack is over
the limit.
Disconnect some of the HDMI devices.
The TV is not connected to the unit via HDMI.
You can display the menu of the unit on the TV only when they are connected with
an HDMI cable. If necessary, use an HDMI cable to connect them (p.23).
Another input source is selected on the TV.
Switch the TV input to display the video from the unit (HDMI OUT jack).
Cause
Remedy
The menu of the unit is not displayed on the TV.
FM/AM radio
Problem
There is multi-path interference.
Adjust the FM antenna height or orientation, or place it in a different location.
Set “FM Mode” in the “Option” menu to “Mono” to select monaural FM radio
reception (p.89).
FM radio reception is weak or noisy.
Your area is too far from the FM station transmitter.
Use an outdoor FM antenna. We recommend using a sensitive multi-element
antenna.
AM radio reception is weak or noisy.
The noises may be caused by fluorescent lamps, motors,
thermostats, or other electrical equipment.
It is difficult to completely eliminate noise. It may be reduced by using an outdoor
AM antenna.
Select the station manually (p.58).
Your area is too far from the FM station transmitter.
Use an outdoor antenna. We recommend using a sensitive multi-element
antenna.
Adjust the AM antenna orientation.
Radio stations cannot be selected automatically.
The AM radio signal is weak.
Select the station manually (p.58).
Use an outdoor AM antenna. Connect it to the ANTENNA (AM) jack together with
the supplied AM antenna.
AM radio stations cannot be registered as
presets.
Auto Preset has been used.
Auto Preset is for registering FM radio stations only. Register AM radio stations
manually (p.59).
APPENDIX ➤ Troubleshooting
En
124
USB and network
Problem
Cause
Remedy
The USB device is not connected to the USB jack securely.
Turn off the unit, reconnect your USB device, and turn the unit on again.
The file system of the USB device is not FAT16 or FAT32.
Use a USB device with FAT16 or FAT32 format.
Folders and files in the USB device cannot be
viewed.
The data in the USB device is protected by the encryption.
Use a USB device without an encryption function.
The network feature does not function.
The network parameters (IP address) have not been obtained
properly.
Enable the DHCP server function on your router and set “DHCP” in the “Setup”
menu to “On” on the unit (p.107). If you want to configure the network parameters
manually, check that you are using an IP address which is not used by other
network devices in your network (p.107).
The unit does not detect the USB device.
The unit cannot connect to the Internet via a
wireless router (access point).
The wireless router (access point) is turned off.
Turn on the wireless router.
The unit and the wireless router (access point) are too far apart.
Place the unit and the wireless router (access point) closer to each other.
There is an obstacle between the unit and the wireless router
(access point).
Move the unit and the wireless router (access point) in a location where there are
no obstacles between them.
Microwave ovens or other wireless devices in your neighborhood
might disturb the wireless communication.
Turn off these devices.
Access to the network is restricted by the firewall settings of the
wireless router (access point).
Check the firewall setting of the wireless router (access point).
The media sharing setting is not correct.
Configure the sharing setting and select the unit as a device to which music
contents are shared (p.69).
Some security software installed on your PC is blocking the access
of the unit to your PC.
Check the settings of security software installed on your PC.
The unit and PC are not in the same network.
Check the network connections and your router settings, and then connect the
unit and the PC to the same network.
The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your PC to allow it to access to the unit (p.108).
The files are not supported by the unit or the media server.
Use the file format supported by both the unit and the media server. For
information about the file formats supported by the unit, see “Playing back music
stored on media servers (PCs/NAS)” (p.69).
The selected Internet radio station is currently not available.
There may be a network problem at the radio station, or the service may have
been stopped. Try the station later or select another station.
The selected Internet radio station is currently broadcasting
silence.
Some Internet radio stations broadcast silence at certain of times of the day. Try
the station later or select another station.
Access to the network is restricted by the firewall settings of your
network devices (such as the router).
Check the firewall settings of your network devices. The Internet radio can be
played only when it passes through the port designated by each radio station.
The port number varies depending on the radio station.
The unit is connected to a multiple SSID router.
Access to the unit might be restricted by the network separation function on the
router. Connect the iPod to the SSID which can access the unit.
Wireless network is not found.
The unit does not detect the PC.
The files in the PC cannot be viewed or played
back.
The Internet radio cannot be played.
The iPod does not recognize the unit when using
AirPlay.
APPENDIX ➤ Troubleshooting
En
125
Problem
Cause
Remedy
The unit and smartphone/tablet are not in the same network.
Check the network connections and your router settings, and then connect the
unit and smartphone/tablet to the same network.
The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your smartphone/tablet to allow it to access to the
unit (p.108).
It may not be possible depending on the condition of the network.
Update the firmware via the network again or use a USB memory device (p.118).
The application for smartphone/tablet “AV
CONTROLLER” does not detect the unit.
Firmware update via the network is failed.
APPENDIX ➤ Troubleshooting
En
126
Error indications on the front display
Message
Cause
Remedy
Access denied
Access to the PC is denied.
Configure the sharing settings and select the unit as a device to which music contents are shared
(p.69).
Access error
The unit cannot access the USB device.
Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
The unit cannot access the iPod.
Turn off the iPod and turn it on again.
The connected iPod is not supported by the unit.
Use an iPod supported by the unit (p.63).
Make sure your router and modem are turned on.
There is a problem with the signal path from the network to the unit.
Check the connection between the unit and your router (or hub) (p.30).
Check SP Wires
The speaker cables short circuit.
Twist the bare wires of the cables firmly and connect to the unit and speakers properly.
Internal Error
An internal error has occurred.
Contact the nearest authorized Yamaha dealer or service center.
MHL Overloaded
An overcurrent is flowing through the MHL-compatible mobile
device.
Turn off the unit and check the connection between the unit and mobile device.
No content
There are no playable files in the selected folder.
Select a folder that contains files supported by the unit.
The unit cannot detect the USB device.
Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
The unit cannot detect the iPod.
Turn off the iPod and then turn it on again.
Please wait
The unit is preparing for connecting to the network.
Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn
it on again.
RemID Mismatch
The remote control IDs of the unit and the remote control are not
identical.
Change the remote control ID of the unit or the remote control (p.116).
The unit cannot play back the songs stored on the iPod for some
reason.
Check the song data. If it cannot be played on the iPod itself, the song data or storage area may be
defective.
The unit cannot play back the songs stored on the PC for some
reason.
Check if the format of files you are trying to play is supported by the unit. For information about the
formats supported by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.69). If
the unit supports the file format, but still cannot play back any files, the network may be overloaded with
heavy traffic.
No device
Unable to play
USB Overloaded
An overcurrent is flowing through the USB device.
Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
Version error
Firmware update is failed.
Update the firmware again.
APPENDIX ➤
Error indications on the front display
En
127
Ideal speaker layout
Use this diagram as a guide. You do not need to adjust the speaker layout to the following diagram exactly.
E
R
0.5 to 1 m
(1.6 to 3.3 ft)
0.5 to 1 m
(1.6 to 3.3 ft)
1.8 m
(5.9 ft)
1
9
1.8 m
(5.9 ft)
2
3
9
Turn it slightly inward to
reduce wall reflections.
Turn it slightly inward to
reduce wall reflections.
4
5
10° to 30°
10° to 30°
1 Front speaker (L)
2 Front speaker (R)
3 Center speaker
6
7
4 Surround speaker (L)
5 Surround speaker (R)
6 Surround back speaker (L)
7 Surround back speaker (R)
0.3 m (1 ft) or more
E Presence speaker (L)
R Presence speaker (R)
9 Subwoofer
APPENDIX
➤ Ideal speaker layout
En
128
Glossary
Audio information
■ Audio decoding format
Dolby Digital
Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports
5.1-channel audio. This technology is used for audio on most DVD discs.
Dolby Digital EX
Dolby Digital EX creates total 6.1-channel audio from 5.1-channel sources that are recorded with Dolby
Digital Surround EX. This decoder adds a surround back sound to the original 5.1-channel sound.
Dolby Digital Plus
Dolby Digital Plus is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports
7.1-channel audio. Dolby Digital Plus remains fully compatible with the existing multichannel audio systems
that support Dolby Digital. This technology is used for audio on BD (Blu-ray discs).
Dolby Pro Logic II
Dolby Pro Logic II enables 5-channel playback from 2-channel sources. There are three modes available:
“Music mode” for music sources, “Movie mode” for movie sources, and “Game mode” for game sources.
Dolby Pro Logic IIx
DTS Express
DTS Express is a compressed digital audio format that supports 5.1-channel audio and allows a higher
compression rate than the DTS Digital Surround format developed by DTS, Inc. This technology is
developed for audio streaming services on the Internet and secondary audio on BD (Blu-ray discs).
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a compressed digital audio format developed by DTS, Inc. that supports
7.1-channel and 96 kHz/24-bit audio. DTS-HD High Resolution Audio remains fully compatible with the
existing multichannel audio systems that support DTS Digital Surround. This technology is used for audio on
BD (Blu-ray discs).
DTS-HD Master Audio
DTS-HD Master Audio is an advanced lossless audio format developed to offer a high-definition home
theater experience with the quality of the studio master by DTS, Inc. DTS-HD Master Audio can carry up to
eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This
technology is used for audio on BD (Blu-ray discs).
DTS Neo:6
DTS Neo:6 enables 6-channel playback from 2-channel sources. There are two modes available: “Music
mode” for music sources and “Cinema mode” for movie sources. This technology provides discrete
full-bandwidth matrix channels of surround sound.
DSD (Direct Stream Digital)
Dolby Pro Logic IIx enables 7-channel playback from 2-channel or multichannel sources. There are three
modes available: “Music mode” for music sources, “Movie mode” for movie sources and “Game mode” for
game sources (for 2-channel sources only).
DSD (Direct Stream Digital) technology stores audio signals on digital storage media, such as SACD (Super
Audio CDs). The signals are stored at a high-frequency sampling rate of 2.8224 MHz. The highest
frequency response is equal to or higher than 100 kHz, with a dynamic range of 120 dB. This technology
offers better audio quality than that used for CDs.
Dolby TrueHD
FLAC
Dolby TrueHD is an advanced lossless audio format developed by Dolby Laboratories, Inc. to offer a
high-definition home theater experience with the quality of the studio master. Dolby TrueHD can carry up to
eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This
technology is used for audio on BD (Blu-ray discs).
FLAC is a file format for lossless audio data compression. FLAC is inferior to lossy compressed audio
formats in compression rate but provides higher audio quality.
DTS 96/24
DTS 96/24 is a compressed digital audio format that supports 5.1-channel and 96 kHz/24-bit audio. This
format remains fully compatible with the existing multichannel audio systems that support DTS Digital
Surround. This technology is used for music DVDs, etc.
DTS Digital Surround
DTS Digital Surround is a compressed digital audio format developed by DTS, Inc. that supports
5.1-channel audio. This technology is used for audio on most DVD discs.
DTS-ES
DTS-ES creates total 6.1-channel audio from 5.1-channel sources that are recorded with DTS-ES. This
decoder adds a surround back sound to the original 5.1-channel sound. In the DTS-ES Matrix 6.1 format, a
surround back sound is recorded in the surround channels, and in the DTS-ES Discrete 6.1 format, a
discrete surround back channel is recorded.
MP3
One of the compressed digital audio format used by MPEG. With psychoacoustic technologies, this
compression method achieves a high compression rate. Reportedly, it is capable of compressing data
quantity by about 1/10 maintaining a certain level of audio quality.
MPEG-4 AAC
An MPEG-4 audio standard. It is used for mobile telephones, portable audio players, and audio streaming
services on Internet because it allows a high compression rate of data while maintaining better audio quality
than MP3.
PCM (Pulse Code Modulation)
PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted. This
technology is the basis of all other audio format. This technology is used as a lossless audio format called
Linear PCM for audio on a variety of media, including CDs and BD (Blu-ray discs).
APPENDIX ➤ Glossary
En
129
Sampling frequency/Quantization bit
Sampling frequency and quantization bits indicate the quantity of information when an analog audio signal
is digitized. These values are noted as in the following example: “48 kHz/24-bit”.
• Sampling frequency
Sampling frequency (the number of times the signal is sampled per second) is called the sampling rate.
When the sampling frequency is higher, the range of frequencies that can be played back are wider.
• Quantization bit
The number of quantization bits indicate the degree of accuracy when converting the sound level into a
numeric value. When the number of quantized bits is higher, the expression of the sound level is more
accurate.
WAV
Windows standard audio file format, which defines the method of recording the digital data obtained by
converting audio signals. By default, the PCM method (no compression) is used, but you can also use other
compression methods.
WMA (Windows Media Audio)
One of the compressed digital audio formats developed by Microsoft Corporation. With psychoacoustic
technologies, this compression method achieves a high compression rate. Reportedly, it is capable of
compressing data quantity by about 1/20 maintaining a certain level of audio quality.
■ Others
Bi-amplification connection (Bi-amp)
A bi-amplification connection uses two amplifiers for a speaker. When you use the bi-amplification
connection, the unit drives the tweeter and woofer in a speaker with the discrete amplifiers. As a
consequence, the tweeter and woofer provide clear audio signal without the interference.
LFE (Low Frequency Effects) 0.1 channel
This channel reproduces low-frequency bass signals and has a frequency range from 20 Hz to 120 Hz. This
channel is added to the channels for all bands with Dolby Digital or DTS to enhance low frequency audio
effects. This channel is labeled 0.1 because it is limited to only low frequency audio.
Lip sync
Video output sometimes lags behind audio output due to the complexity of signal processing caused by an
increase in video signal capacity. Lip sync is a technique for automatically correcting the timing lag
between audio and video output.
HDMI and video information
Component video signal
With the component video signal system, the video signal is separated into the Y signal for luminance and
the Pb and Pr signals for chrominance. Color can be reproduced more faithfully with this system because
each of these signals is independent.
Composite video signal
With the composite video signal system, color, brightness, and synchronization data signals are combined
and transmitted with a single cable.
Deep Color
Deep Color is a technology that HDMI specification supports. Deep Color increases the number of available
colors within the boundaries defined by the RGB or YCbCr color space. Conventional color systems
process the color using 8 bits. Deep Color processes the color with 10, 12, or 16 bits. This technology
allows HDTVs and other displays to increase from millions of colors to billions of colors and eliminate
on-screen color banding for smooth tonal transitions and subtle gradations between colors.
HDMI
HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/video
signal transmission. This interface transmits both digital audio and digital video signals using a single cable
without any loss. HDMI complies with HDCP (High-bandwidth Digital Content Protection) and provides a
secure audio/video interface. For further information on HDMI, visit the HDMI website at
“http://www.hdmi.org/”.
MHL
MHL (Mobile High-definition Link) is the interface standard for high-speed digital video signal transmission
that is developed for mobile devices. This interface transmits both digital audio and digital video signals
from mobile devices (such as smartphones) using a single cable with any loss. As with HDMI, MHL
complies with HDCP (High-bandwidth Digital Content Protection).
x.v.Color
“x.v.Color” is a technology that the HDMI specification supports. It is a more extensive color space than
sRGB and allows the expression of colors that were not hitherto possible. While remaining compatible with
the color gamut of sRGB standards, “x.v.Color” expands the color space, and thus can produce more vivid,
natural images.
Network information
SSID
SSID (Service Set Identifier) is a name that identifies a particular wireless LAN access point.
Wi-Fi
Wi-Fi (Wireless Fidelity) is a technology that allows an electronic device to exchange data or connect to the
Internet wirelessly using radio waves. Wi-Fi offers the advantage of eliminating the complexity of making
connections with network cables by using wireless connection. Only products that complete Wi-Fi Alliance
interoperability tests can carry the “Wi-Fi Certified” trademark.
WPS
WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy
establishment of a wireless home network.
APPENDIX ➤ Glossary
En
130
Yamaha technologies
Supported devices and file formats
CINEMA DSP (Digital Sound Field Processor)
Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is
best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions
(such as room size, wall material, and number of speakers) can differ so widely, it is inevitable that there are
differences in the sound that you hear. Based on a wealth of actually measured data, CINEMA DSP,
Yamaha’s original DSP technology provides the audiovisual experience of a movie theater in your own
home.
CINEMA DSP 3D
The actually measured sound field data contain the information of the height of the sound images. CINEMA
DSP 3D mode achieves the reproduction of the accurate height of the sound images so that it creates the
accurate and intensive 3D sound fields in a listening room.
Compressed Music Enhancer
The Compressed Music Enhancer feature compensates for missing harmonics in compression music
formats (such as MP3). As a result, this technology provides improved performance for the overall sound
system.
SILENT CINEMA
■ Supported devices
❑ USB devices
• This unit supports USB mass storage class devices (e.g., flash memories or portable
audio players) using FAT16 or FAT32 format.
• Do not connect devices other than USB mass storage class devices (such as USB
chargers or USB hubs), PCs, card readers, an external HDD, etc.
• USB devices with encryption cannot be used.
• Some features may not be compatible, depending on the model or manufacturer of
the USB storage device.
❑ iPod
Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for
headphones have been set for each sound program, so that accurate representations of all the sound
programs can be enjoyed on headphones.
Made for.
Virtual CINEMA DSP
iPod nano (2nd, 3rd, 4th, 5th, 6th and 7th generation)
Virtual CINEMA DSP allows the system to virtually reproduce the sound field of the surround speakers with
front left and right speakers. Even if the surround speakers are not connected, the unit creates the realistic
sound field in a listening room.
iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G
Virtual CINEMA FRONT
Virtual CINEMA FRONT allows the system to virtually reproduce the sound field of the surround speakers
with front surround speakers. Even if the surround speakers placed in the front, the unit creates the realistic
sound field in a listening room.
iPod touch (2nd, 3rd, 4th and 5th generation)
iPad (4th generation), iPad mini, iPad (3rd generation), iPad 2, iPad
(as of January 2014)
• An iPod may not be detected by the unit or some features may not be compatible,
depending on the model or software version of the iPod.
Virtual Presence Speaker (VPS)
Virtual Presence Speaker allows the system to virtually reproduce the height of the 3D sound field without
front presence speakers. Even if the front presence speakers are not connected, the unit creates the 3D
sound field in your room.
❑ AirPlay
AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X
Mountain Lion, and Mac and PC with iTunes 10.2.2 or later.
(as of January 2014)
APPENDIX ➤ Supported devices and file formats
En
131
About HTC Connect
This receiver features “HTC Connect”, a simple way to enjoy all music content from
your HTC Connect certified smartphone.
1. HTC Connect music streaming provided on this product has been developed based on
interoperability testing as defined by the HTC Connect program with the HTC Connect
compatible smartphones.
2. HTC Connect has been tested with MP3, AAC, WMA and WAV encoding formats. Other
formats may not be compatible.
■ File formats
❑ USB
• The unit supports WAV (PCM format only), MP3, WMA, MPEG-4 AAC, FLAC and
ALAC (Apple Lossless Audio Codec) files (1- or 2-channel audio only).
• The unit is compatible with sampling rate of up to 192 kHz for WAV and FLAC files,
96 kHz for ALAC files, and 48 kHz for other files.
• The unit supports gapless playback of WAV, FLAC and ALAC files.
3. High network congestion may interfere with the operation of HTC Connect.
• Digital Rights Management (DRM) contents cannot be played back.
4. Music navigation via the music progress bar is not currently supported with HTC
Connect.
❑ PC/NAS
Please check HTC website for up to date information about features, compatible
devices and audio format support: http://www.htc-connect.com/certified-devices
• The unit supports playback of WAV (PCM format only), MP3, WMA, MPEG-4 AAC,
FLAC and ALAC (Apple Lossless Audio Codec) files.
• The unit is compatible with sampling rates of up to 192 kHz for WAV and FLAC files,
96 kHz for ALAC files, and 48 kHz for other files.
• The unit supports gapless playback of WAV, FLAC and ALAC files.
• To play back FLAC files, you need to install server software that supports sharing of
FLAC files via DLNA on your PC or use a NAS that supports FLAC files.
• Digital Rights Management (DRM) contents cannot be played back.
APPENDIX ➤ Supported devices and file formats
En
132
Video signal flow
Video signals input from a video device to the unit are
output to a TV as shown below.
■ Video conversion table
• You can select the resolution and the aspect ratio applied to HDMI-output video processing in “Video Mode” (p.105) in the “Setup” menu.
• The unit does not convert 480-line and 576-line video signals interchangeably.
HDMI out
Video device
The unit
TV
Resolution
480i/
576i
480p/
576p
720p
1080i
1080p
4K
480i/576i
m
m
m
m
m
m
m
m
m
m
m
720p
m
m
m
m
1080i
m
m
m
m
1080p/50, 60 Hz
m
m
m
m
m
m
480p/576p
HDMI in
HDMI out
HDMI
HDMI
HDMI
HDMI
HDMI in
1080p/24 Hz
COMPONENT
VIDEO in
COMPONENT
VIDEO out
COMPONENT
VIDEO
COMPONENT
VIDEO
480i/576i
PR
PR
PR
PB
PB
PB
PB
Y
Y
Y
Y
VIDEO
VIDEO
out
VIDEO
VIDEO
480p/
576p
720p
1080i
480i/
576i
m
m
m
m
m
m
m
COMPONENT
VIDEO
PR
VIDEO
in
480i/
576i
m
4K
COMPONENT
VIDEO
VIDEO
out
COMPONENT VIDEO out
COMPONENT
VIDEO in
m
480p/576p
m
720p
m
1080i
VIDEO
VIDEO in
480i/576i
m
m
m
m
m
m
m
m: Available
APPENDIX ➤ Supported devices and file formats
En
133
(Example)
Information on HDMI
HDMI Control
HDMI Control
HDMI Control
HDMI Control allows you to operate external devices via HDMI. If you connect a TV that
supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as
power and volume) with TV remote control operations. You can also control playback
devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with
an HDMI cable.
For details on connections, see “Connecting a TV” (p.23) and “Connecting video
devices (such as BD/DVD players)” (p.25).
Turns on and displays
video from the playback
device
Playback starts
Press SCENE (BD/DVD)
To use HDMI Control, you need to perform the following HDMI Control link setup after
connecting the TV and playback devices.
For details on settings and operating your TV, refer to the instruction manual for the TV.
Operations available from the TV’s remote control
• Standby synchronization
• This setup is required every time you add a new HDMI Control-compatible device to your system.
• Volume control including mute
• Switching to input audio from the TV when the TV input is switched to its built-in tuner
• Switching to input video/audio from the selected playback device
• Switching between audio output devices (the unit or TV speaker)
1
2
Turn on the unit, TV, and playback devices.
Configure the settings of the unit.
a Switch the TV input to display video from the unit.
b Press ON SCREEN.
(Example)
ON
SCREEN
OPTION
HDMI Control
HDMI Control
ON SCREEN
Cursor keys
ENTER
ENTER
Playback device
also turns off
RETURN
The unit turns off
(standby)
Turn off the TV
DISPLAY
c Use the cursor keys to select “Setup” and press ENTER.
Operations available from the unit’s remote control
• Starting playback on the playback device and turning on the TV with a scene
selection (p.51)
• Switching the TV input to display the on-screen menu (when ON SCREEN is pressed)
• Controlling the playback device (playback and menu operations) using the external
device operation keys
APPENDIX
➤ Information on HDMI
En
134
d Use the cursor keys (e/r) to select “HDMI”.
Audio Return Channel (ARC)
ARC allows you to input TV audio to the unit with the HDMI cable which transmits video
signal to the TV.
Check the following after the HDMI Control settings.
1
2
e Use the cursor keys (q/w) to select “HDMI Control” and press ENTER.
f Use the cursor keys to select “On”.
g Press ON SCREEN.
3
Enable HDMI Control on the TV and playback devices (such as HDMI
Control-compatible BD/DVD players).
4
Turn off the main power of the TV and then turn off the unit and
playback devices.
5
6
7
Turn on the unit and playback devices and then turn on the TV.
Select a TV program with the TV remote control.
Check that the input source of the unit will be automatically switched
to “AV 4” and the TV audio will be played back on the unit.
If you cannot hear the TV audio, check the following:
– “ARC” (p.106) in the “Setup” menu is set to “On”.
– The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack
marked “ARC”) on the TV.
Some HDMI jack on the TV is not compatible with ARC. For details, refer to the
instruction manual for the TV.
• If the audio is interrupted while using ARC, set “ARC” (p.106) in the “Setup” menu to “Off” and use a
digital optical cable to input TV audio to the unit (p.25).
• When using ARC, connect a TV with an HDMI cable that supports ARC.
Switch the TV input to display the video from the unit.
Check the followings.
• “AV 4” is set as TV audio input at the factory. If you have connected any external device to the AV 4
jacks, use “TV Audio Input” (p.106) in the “Setup” menu to change the TV audio input assignment. To
use the SCENE function (p.51), you also need to change the input assignment for SCENE (TV).
On the unit: The input to which the playback device is connected is selected.
If not, select the input source manually.
On the TV: The video from the playback device is displayed.
8
Check that the unit is properly synchronized with the TV by turning
off the TV or adjusting the TV volume with the TV remote control.
• If HDMI Control does not work properly, try unplugging the TV in Step 2 and plugging in the TV again in
Step 3. It may solve the problem. Also, HDMI Control may not work if the number of connected devices
exceeds the limit. In this case, disable HDMI Control on the devices not in use.
• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
• We recommend using TV and playback devices from the same manufacturer so that HDMI Control works
more effectively.
• We do not assure the operation of all HDMI Control-compatible devices.
APPENDIX
➤ Information on HDMI
En
135
HDMI signal compatibility
Audio signals
Audio signal type
Audio signal format
Compatible media (example)
2ch Linear PCM
2ch, 32 to 192 kHz, 16/20/24 bit
CD, DVD-Video, DVD-Audio
Multichannel Linear PCM
8ch, 32 to 192 kHz, 16/20/24 bit
DVD-Audio, BD (Blu-ray disc),
HD DVD
DSD
2 to 5.1ch, 2.8224 MHz, 1 bit
SACD
Bitstream
Dolby Digital, DTS
DVD-Video
Bitstream
(High definition audio)
Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio, DTS-HD
BD (Blu-ray disc), HD DVD
High Resolution Audio, DTS
Express
Video signals
The unit is compatible with the video signals of the following resolutions:
• VGA
• 720p/60 Hz, 50 Hz
• 480i/60 Hz
• 1080i/60 Hz, 50 Hz
• 576i/50 Hz
• 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
• 480p/60 Hz
• 4K/60 Hz, 50Hz, 30 Hz, 25 Hz, 24 Hz
• 576p/50 Hz
• When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending
on the type of the DVD player.
• The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction
manual for each device.
• To decode audio bitstream signals on the unit, set the input source device appropriately so that the device
outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device).
For details, refer to the instruction manual for the playback device.
APPENDIX
➤ Information on HDMI
En
136
Trademarks
Manufactured under license from Dolby Laboratories. Dolby, Pro
Logic, Surround EX and the double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195;
7,272,567 & other U.S. and worldwide patents issued & pending.
DTS-HD, the Symbol, & DTS-HD and the Symbol together are
registered trademarks & DTS-HD Master Audio is a trademark of
DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
This receiver supports network connections.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
“x.v.Color” is a trademark of Sony Corporation.
iTunes, AirPlay, iPad, iPhone, iPod, iPod nano, iPod touch, and Safari
are trademarks of Apple Inc., registered in the U.S. and other
countries.
Ubiquitous WPS2.0
Copyright © 2013 Ubiquitous Corp.
MHL and the MHL logo are a trademark, registered trademark or
service mark of MHL, LLC in the United States and/or other countries.
x.v.Color™
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that
an electronic accessory has been designed to connect specifically
to iPod, iPhone, or iPad, respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, iPhone, or iPad
may affect wireless performance.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi
Alliance.
The Wi-Fi Protected Setup Identifier Mark is a mark of the Wi-Fi
Alliance.
HTC, HTC Connect and the HTC Connect Logo are either registered
trademarks or trademarks of HTC Corporation.
“SILENT CINEMA” is a trademark of Yamaha Corporation.
DLNA™ and DLNA CERTIFIED™ are trademarks or registered
trademarks of Digital Living Network Alliance. All rights reserved.
Unauthorized use is strictly prohibited.
Windows™
Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
Internet Explorer, Windows Media Audio and Windows Media Player
are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Android™
Android is a trademark of Google Inc.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS
and Thomson.
APPENDIX
➤ Trademarks
En
137
Specifications
Input jacks
Output jacks
Other jacks
• Analog Audio
• Analog Audio
• YPAO MIC x 1
[RX-V777]
[RX-V777]
[U.S.A. and Canada models]
- Speaker Out x 9 (7 ch) (FRONT L/R, CENTER,
• REMOTE IN x 1
Audio x 4 (AV 5–6, AUDIO 1–2)
SURROUND L/R, SURROUND BACK L/R*1, EXTRA SP L/R*2)
• REMOTE OUT x 1
[Other models]
*1 Note: Assignment is possible [SURROUND BACK,
• TRIGGER OUT x 1
Audio x 5 (AV 5–6, AUDIO 1–2, PHONO)
[RX-V677]
Audio x 4 (AV 5–6, AUDIO 1–2)
• Digital Audio (Supported frequencies: 32 kHz to 96 kHz)
BI-AMP (FRONT L/R)]
*2 Note: Assignment is possible [ZONE2, PRESENCE]
- Pre Out x 7 (FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R)
Optical x 2 (AV 1, AV 4)
- Subwoofer Out x 2 (SUBWOOFER 1–2, mono)
Coaxial x 2 (AV 2–3)
- AV OUT x 1
• Video
Composite x 5 (AV 3–6, VIDEO [Front Panel])
Component x 2 (AV 1–2)
• HDMI Input
HDMI x 6 (HDMI 1–5, V-AUX*)
* V-AUX: MHL input compatible
• Other
• DC OUT x 1
HDMI
• HDMI features: Deep Color, “x.v.Color,” Auto Lip Sync, ARC
(Audio Return Channel), 3D, 4K Ultra HD
• Video Format (Repeater Mode)
- ZONE2 OUT x 1
- VGA
- Headphone x 1
- 480i/60 Hz
[RX-V677]
- 576i/50 Hz
- Speaker Out x 9 (7 ch) (FRONT L/R, CENTER,
- 480p/60 Hz
SURROUND L/R, SURROUND BACK L/R*1, EXTRA SP L/R*2)
- 576p/50 Hz
*1 Note: Assignment is possible [SURROUND BACK,
- 720p/60 Hz, 50 Hz
BI-AMP (FRONT L/R)]
*2 Note: Assignment is possible [ZONE2, PRESENCE]
USB x 1 (USB2.0)
- Subwoofer Out x 2 (SUBWOOFER 1–2, mono)
NETWORK x 1 (100Base-TX/10Base-T)
- AV OUT x 1
- ZONE2 OUT x 1
- Headphone x 1
• Video
- 1080i/60 Hz, 50 Hz
- 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
- 4K/60 Hz, 50Hz, 30 Hz, 25 Hz, 24 Hz
• Audio Format
- Dolby TrueHD
- Dolby Digital Plus
- Dolby Digital
MONITOR OUT
- DTS-HD Master Audio
- Component x 1
- DTS-HD High Resolution Audio
- Composite x 1
- DTS Express
AV OUT
- DTS
- Composite x 1
- DSD 2-ch to 6-ch
• HDMI Output
[RX-V777]
HDMI OUT x 2 (HDMI OUT 1–2)
- PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)
• Content Protection: HDCP compatible
• Link Function: CEC supported
[RX-V677]
HDMI OUT x 1
APPENDIX ➤ Specifications
En
138
MHL
Compatible Decoding Formats
• Video Format (Repeater Mode)
• Decoding Format
- VGA
- Dolby TrueHD, Dolby Digital Plus
- 480i/60 Hz
- Dolby Digital, Dolby Digital EX
- 576i/50 Hz
- DTS-HD Master Audio, DTS-HD High Resolution Audio,
- 480p/60 Hz
DTS Express
- 576p/50 Hz
- DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
- 720p/60 Hz, 50 Hz
- DTS Digital Surround
- 1080i/60 Hz, 50 Hz
• Post Decoding Format
- 1080p/30 Hz, 25 Hz, 24 Hz
• Audio Format
- PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)
• Current Supply Capacity: 1.0 A
• Analog Tuner
[U.K. and Europe models]
FM/AM with Radio Data System x 1 (TUNER)
[RX-V777]
(1 kHz, 0.9% THD, 8 )
Front L/R..................................................................... 130 W/ch
Center ....................................................................... 130 W/ch
Surround L/R .............................................................. 130 W/ch
Surround Back L/R..................................................... 130 W/ch
(1 kHz, 0.9% THD, 4 )
Front L/R [U.K. and Europe models].......................... 160 W/ch
- Dolby Pro Logic
- Dolby Pro Logic II Music, Dolby Pro Logic II Movie,
Dolby Pro Logic II Game
- Dolby Pro Logic IIx Music, Dolby Pro Logic IIx Movie,
Dolby Pro Logic IIx Game
TUNER
• Rated Output Power (1-channel driven)
- DTS Neo:6 Music, DTS Neo:6 Cinema
Audio Section
• Rated Output Power (2-channel driven)
[RX-V677]
(1 kHz, 0.9% THD, 8 )
Front L/R..................................................................... 125 W/ch
Center ....................................................................... 125 W/ch
Surround L/R .............................................................. 125 W/ch
Surround Back L/R..................................................... 125 W/ch
(1 kHz, 0.9% THD, 4 )
Front L/R [U.K. and Europe models].......................... 150 W/ch
• Maximum Effective Output Power (JEITA, 1 kHz, 10% THD, 8 )
[RX-V777]
[China, Korea, Asia and General models]
(20 Hz to 20 kHz, 0.09% THD, 8 )
[RX-V777]
Front L/R ................................................................. 95 W+95 W
Front L/R..................................................................... 160 W/ch
USB
(1 kHz, 0.9% THD, 8 )
Center ........................................................................ 160 W/ch
• Capable of iPod, Mass Storage Class USB Memory
Front L/R ............................................................. 110 W+110 W
Surround L/R .............................................................. 160 W/ch
• Current Supply Capacity: 2.1 A
Center..............................................................................110 W
Surround Back L/R..................................................... 160 W/ch
Surround L/R ...................................................... 110 W+110 W
[RX-V677]
Network
Surround Back L/R ............................................. 110 W+110 W
Front L/R..................................................................... 150 W/ch
• PC Client Function
[RX-V677]
Center ........................................................................ 150 W/ch
• Compatible with DLNA ver. 1.5
(20 Hz to 20 kHz, 0.09% THD, 8 )
Surround L/R .............................................................. 150 W/ch
Front L/R ................................................................. 90 W+90 W
Surround Back L/R..................................................... 150 W/ch
[Other models]
FM/AM x 1 (TUNER)
• AirPlay supported
(1 kHz, 0.9% THD, 8 )
• Dynamic Power (IHF)
• Internet Radio
Front L/R ............................................................. 105 W+105 W
[RX-V777]
• HTC Connect supported
Center..............................................................................105 W
Front L/R (8/6/4/2 ) .................................. 130/170/195/240 W
Surround L/R ...................................................... 105 W+105 W
[RX-V677]
• WiFi function
- Capable of WPS by PIN Method and Push-Button-Method
- Capable of Direct Connection with Mobile Device
- Available Security Method: WEP, WPA-PSK (TKIP),
Surround Back L/R ............................................. 105 W+105 W
Front L/R (8/6/4/2 ) .................................. 125/165/190/235 W
• Damping Factor
Front L/R, 20 Hz to 20 kHz, 8  .............................100 or more
WPA-PSK (AES), WPA2-PSK (AES), Mixed Mode
- Radio Frequency: 2.4GHz
- Wireless Network Standard: IEEE 802.11 b/g
APPENDIX ➤ Specifications
En
139
• Input Sensitivity / Input Impedance
• Total Harmonic Distortion
• Filter Characteristics
[RX-V777]
[RX-V777]
(fc=40/60/80/90/100/110/120/160/200 Hz)
PHONO (1 kHz, 100 W/8 )
PHONO to AV OUT (20 Hz to 20 kHz, 1 V)
H.P.F. (Front, Center, Surround, Surround Back).......12 dB/oct.
[Except for U.S.A. and Canada models] .............3.5 mV/47 k
[Except for U.S.A. and Canada models]............. 0.02% or less
L.P.F. (Subwoofer) .....................................................24 dB/oct.
AV 5 etc. (1 kHz, 100 W/8 )..............................200 mV/47 k
AV 5 etc. to Front (Pure Direct)
[RX-V677]
(20 Hz to 20 kHz, 50 W, 8 )............................... 0.06% or less
AV 5 etc. (1 kHz, 100 W/8 )..............................200 mV/47 k
[RX-V677]
• Maximum Input Signal
[RX-V777]
PHONO (1 kHz, 0.1% THD)
AV 5 etc. to Front (Pure Direct)
(20 Hz to 20 kHz, 50 W, 8 )............................... 0.06% or less
• Signal to Noise Ratio (IHF-A Network)
Video Section
• Video Signal Type
[U.S.A., Canada, Korea and General models] ................NTSC
[Other models] ....................................................................PAL
• Video Signal Level
[Except for U.S.A. and Canada models] ........................ 60 mV
[RX-V777]
Composite..............................................................1 Vp-p/75 
AV 5 etc. (1 kHz, 0.5% THD, Effect On) ........................... 2.3 V
PHONO (Input Shorted 35 mV, AV OUT)
Component
[RX-V677]
[Except for U.S.A. and Canada models]............ 96 dB or more
AV 5 etc. (1 kHz, 0.5% THD, Effect On) ........................... 2.3 V
AV 5 etc. (Pure Direct) (Input 1 k Shorted, Speaker Out)
• Output Level / Output Impedance
......................................................................... 110 dB or more
Y ..........................................................................1 Vp-p/75 
Pb/Pr ................................................................0.7 Vp-p/75 
• Video Maximum Input Level........................... 1.5 Vp-p or more
[RX-V777]
[RX-V677]
• Video Signal to Noise Ratio................................ 50 dB or more
AV OUT ..............................................................200 mV/1.2 k
AV 5 etc. (Pure Direct) (Input 1 k Shorted, Speaker Out)
• Monitor Out Frequency Response
PRE OUT...................................................................1 V/1.2 k
......................................................................... 110 dB or more
SUBWOOFER ...........................................................1 V/1.2 k
ZONE2 OUT.......................................................200 mV/1.2 k
[RX-V677]
• Residual Noise (IHF-A Network)
Front L/R (Speaker Out) ..................................... 150 µV or less
[RX-V777]
SUBWOOFER ...........................................................1 V/1.2 k
PHONO (Input Shorted, 1 kHz/10 kHz)
ZONE2 OUT.......................................................200 mV/1.2 k
[Except for U.S.A. and Canada models]
AV 5 etc. (1 kHz, 50 mV, 8 ) .............................100 mV/560 
• Frequency Response
AV 5 etc. to Front (10 Hz to 100 kHz) ......................... +0/-3 dB
• RIAA Equalization Deviation
[RX-V777]
PHONO
[Except for U.S.A. and Canada models] ....................0±0.5 dB
FM Section
• Tuning Range
• Channel Separation
AV OUT ..............................................................200 mV/1.2 k
• Headphone Jack Rated Output / Impedance
Component ............................................5 Hz to 60 MHz, -3 dB
[U.S.A. and Canada models].............. 87.5 MHz to 107.9 MHz
[Asia and General models]
...................................... 87.5/87.50 MHz to 108.0/108.00 MHz
[Other models] ................................ 87.50 MHz to 108.00 MHz
................................................................ 60 dB/55 dB or more
AV 5 etc. (Input 1 k Shorted, 1 kHz/10 kHz)
................................................................ 70 dB/50 dB or more
[RX-V677]
• 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)
Mono ................................................................. 3 µV (20.8 dBf)
• Signal to Noise Ratio (IHF)
AV 5 etc. (Input 1 k Shorted, 1 kHz/10 kHz)
Mono ................................................................................71 dB
................................................................ 70 dB/50 dB or more
Stereo...............................................................................70 dB
• Volume Control
• Harmonic Distortion (IHF, 1 kHz)
Range............................................. MUTE, -80 dB to +16.5 dB
Mono ................................................................................. 0.5%
Step ................................................................................ 0.5 dB
Stereo................................................................................ 0.6%
• Tone Control Characteristics
• Antenna Input................................................ 75  unbalanced
Bass Boost/Cut............................. ±6 dB/0.5 dB Step at 50 Hz
Bass Turnover ............................................................... 350 Hz
Treble Boost/Cut..........................±6 dB/0.5 dB Step at 20 kHz
Treble Turnover..............................................................3.5 kHz
APPENDIX ➤ Specifications
En
140
AM section
• Tuning Range
[U.S.A. and Canada models] .................. 530 kHz to 1710 kHz
[Asia and General models]...... 530/531 kHz to 1710/1611 kHz
[Other models]......................................... 531 kHz to 1611 kHz
General
• Power Supply
• Reference Dimensions (W x H x D) (with wireless antenna)
[RX-V777]
[China model]
.........................435 x 234 x 381 mm (17-1/8” x 9-1/4” x 15”)
[Other models]
.................. 435 x 234 x 379 mm (17-1/8” x 9-1/4” x 14-7/8”)
[RX-V677] ..... 435 x 234 x 378 mm (17-1/8” x 9-1/4” x 14-7/8”)
• Weight
[U.S.A. and Canada models] ......................... AC 120 V, 60 Hz
[RX-V777] ......................................................10.5 kg (23.2 lbs)
[General model]............ AC 110 to 120/220 to 240 V, 50/60 Hz
[RX-V677] ......................................................10.0 kg (22.1 lbs)
[China model] ................................................. AC 220 V, 50 Hz
[Korea model]................................................. AC 220 V, 60 Hz
[Australia model] ............................................ AC 240 V, 50 Hz
* Specifications are subject to change without notice.
[U.K. and Europe models].............................. AC 230 V, 50 Hz
[Asia model] ................................... AC 220 to 240 V, 50/60 Hz
• Power Consumption
[U.S.A. and Canada models] ......................................... 400 W
[China, Asia and General models] ................................. 270 W
[Other models]................................................................ 300 W
• Standby Power Consumption
HDMI Control Off, Standby Through Off............0.1 W (Typical)
HDMI Control On, Standby Through On (No Signals)
...........................................................................1.9 W (Typical)
Network Standby On
Wired ..............................................................3.2 W (Typical)
Wi-Fi................................................................4.0 W (Typical)
Wireless Direct................................................4.1 W (Typical)
HDMI Control On, Standby Through On (No Signals),
Network Standby On (Wireless Direct) ..............5.1 W (Typical)
• Maximum Power Consumption
[Asia and General models]............................................. 590 W
• Dimensions (W x H x D)
[RX-V777]
[China model]
................... 435 x 171 x 368 mm (17-1/8” x 6-3/4” x 14-1/2”)
[Other models]
................... 435 x 171 x 365 mm (17-1/8” x 6-3/4” x 14-3/8”)
[RX-V677] ..... 435 x 171 x 364 mm (17-1/8” x 6-3/4” x 14-3/8”)
* Including legs and protrusions
APPENDIX ➤ Specifications
En
141
Index
Symbols
Exclamation mark (!)
Lock icon (o) 112
115, 119
Numerics
16:9 Normal (Aspect, Setup menu) 105
2.1-channel system 18
2ch Stereo (sound program) 54
3.1-channel system 18
4.1-channel system 17
4K Ultra HD 136
5.1-channel system 17
5ch BI-AMP (Power Amp Assign, Setup menu) 100
6.1-channel system 16, 20
7.1+2-channel system 16, 19
7.1-channel system 16, 19, 20
7ch +1ZONE (Power Amp Assign, Setup menu) 100
7ch Stereo (sound program) 54
A
A.DRC (YPAO Volume, Option menu) 88
Access denied (error indication) 127
Access error (error indication) 127
Access Point Scan (Wireless (Wi-Fi), Setup menu)
Action Game (sound program) 54
Adaptive DRC (YPAO Volume, Option menu) 88
Adaptive DSP Level (Sound, Setup menu) 104
Adjustment (Lipsync, Setup menu) 104
ADVANCED SETUP menu 116
Adventure (sound program) 53
AirPlay 76
AM radio listening 58
Amp (Audio Output, Setup menu) 107
ARC (Audio Return Channel) 135
ARC (HDMI Control, Setup menu) 106
Aspect (Video Mode, Setup menu) 105
Audio Decoder (front display information) 86
Audio file format (PC/NAS) 132
Audio file format (USB storage device) 132
Audio In (Input menu) 91
Audio Output (HDMI, Setup menu) 107
Audio Return Channel (ARC) 135
Audio Signal (Information menu) 114
Auto Power Standby (ECO, Setup menu) 112
Auto Preset (FM radio) 62
Auto Setup (Speaker, Setup menu) 34
Auto/Manual Select (Lipsync, Setup menu) 103
Automatic speaker setting optimization 34
AutoPowerStdby (ECO, Setup menu) 112
B
Banana plug 20
Basic playback operation 50
Bass (Tone Control, Option menu) 88
Bass Cross Over (Speaker, Setup menu) 101
Bitrate (Audio Signal, Information menu) 114
Bitstream 136
Bookmark Off (Internet radio, Option menu) 75
Bookmark On (Internet radio, Option menu) 75
C
46
Cellar Club (sound program) 54
Center (Speaker, Setup menu) 100
Center Image (Sound Program menu) 96
Center Width (Sound Program menu) 96
Chamber (sound program) 54
Channel (Audio Signal, Information menu) 114
Check SP Wires (error indication) 127
Check Sur. (YPAO error message) 40
CINEMA DSP 53
CINEMA DSP 3D 53
CINEMA DSP 3D Mode (Sound, Setup menu) 104
CLASSICAL (sound program subcategory) 54
Clear Preset (FM/AM radio) 62
Clock Time (Radio Data System) 60
Compressed Music Enhancer 57
Configuration (Speaker, Setup menu) 100
Crossover frequency setting (subwoofer) 34
D
DC OUT (Function, Setup menu) 111
Decode Type (Sound Program menu) 95
Decoder Mode (Input menu) 91
Decoder Off (front display information) 86
Default Gateway (IP Address, Setup menu) 108
Default Gateway (Network, Information menu) 115
Default setting restoration 117
Delay Enable (Lipsync, Setup menu) 103
Detail (Load, Scene menu) 93
Device Control (Load, Scene menu) 93
DHCP (IP Address, Setup menu) 107
Dialog (Option menu) 88
Dialog Lift (Dialogue, Option menu) 88
Dialog Lvl (Dialogue, Option menu) 88
Dialogue (Audio Signal, Information menu) 114
Dialogue (Option menu) 88
Dialogue Level (Dialogue, Option menu) 88
Dialogue Lift (Dialogue, Option menu) 88
Dialogue normalization level 114
Digital Media Controller (DMC) 92
Dimension (Sound Program menu) 96
Dimmer (Front Display) (Display Set, Setup menu) 110
Direct (Sound Program menu) 96
Direct Stream Digital (DSD) 129
Display Set (Function, Setup menu) 110
Distance (Speaker, Setup menu) 102
Distance (YPAO measurement result) 39
DLNA 69
DMC (Digital Media Controller) 92
DMC Control (Input menu) 92
DNS Server (IP Address, Setup menu) 108
DNS Server (Network, Information menu) 115
Dolby Digital EX (Extended Surround) 104
Dolby Pro Logic (surround decoder) 56
APPENDIX
➤ Index
En
142
Dolby Pro Logic II (surround decoder) 56
Dolby Pro Logic IIx (surround decoder) 56
Dolby Pro Logic IIx Movie (Extended Surround)
Dolby Pro Logic IIx Music (Extended Surround)
Drama (sound program) 53
DSD (Direct Stream Digital) 129
DSP Level (Sound Program menu) 95
DSP Program (front display information) 86
DTS Neo:6 (surround decoder) 56
DTS-ES (Extended Surround) 104
Dynamic Range (Sound, Setup menu) 104
104
104
8, 9
101
G
Ground lead
28
H
E
ECO (Setup menu) 112
ECO Mode (ECO, Setup menu) 113
Enhancer (Option menu) 89
ENHANCER (sound mode) 57
ENTERTAINMENT (sound program subcategory)
Error indication (front display) 127
EX/ES (Extended Surround, Setup menu) 104
Extended Surround (Sound, Setup menu) 104
External power amplifier 31
Extra Bass (Subwoofer/Bass, Option menu) 89
Front display brightness 110
Front display information 86
Front panel (part names and functions)
Front Presence (Speaker, Setup menu)
Function (Setup menu) 110
54
F
Filter (MAC Address Filter, Setup menu) 108
Firmware update 118
Firmware update (network) 118
Firmware update (USB) 118
Firmware Version (System, Information menu) 115
Firmware version check 118
FM Mode (Option menu) 89
FM radio listening 58
FM/AM radio tuning 58
Format (Audio Signal, Information menu) 114
Frequency (FM/AM radio) 58
Frequency step setting 58, 117
Front (Speaker, Setup menu) 100
Front / Rear Balance (Sound Program menu) 96
Front 5.1-channel system 17
Front display (part names and functions) 10
Hall in Munich (sound program) 54
Hall in Vienna (sound program) 54
HDMI (Setup menu) 106
HDMI Control (HDMI, Setup menu) 106
HDMI Monitor (Information menu) 114
HDMI OUT (Audio Output, Setup menu) 107
HDMI OUT1 (Audio Output, Setup menu) 107
HDMI OUT2 (Audio Output, Setup menu) 107
HDMI output selection 50
HDMI signal compatibility 136
Headphones 55
Height Balance (Sound Program menu) 96
High definition audio 136
HTC Connect 132
I
In.Trim (Input Settings, Option menu) 89
Indicator (part names and functions) 10
Information display (front display) 10
Information menu 114
Information switching (front display) 86
INIT (ADVANCED SETUP menu) 117
Initial Delay (Sound Program menu) 95
Initial Volume (Sound, Setup menu) 104
Initial Volume (Zone2 Set, Setup menu) 110
Input (Audio Signal, Information menu) 114
Input (front display information) 86
Input menu 90
Input Settings (Option menu) 89
Input Trim (Input Settings, Option menu) 89
Internal Error (error indication) 127
Internal Error (YPAO error message) 40
Internet radio listening 73
IP Address (Network, Information menu) 115
IP Address (Network, Setup menu) 107
iPod charge 63
iPod content playback 63
iPod content playback (AirPlay) 76
iTunes content playback (AirPlay) 76
L
Language (Setup menu) 113
Layout (Speaker, Setup menu) 101
Left / Right Balance (Sound Program menu) 96
Level (Sound Program menu) 96
Level (Speaker, Setup menu) 102
Level (YPAO measurement result) 39
Level Error (YPAO warning message) 41
LFE (Low Frequency Effects) 130
Lipsync 130
Lipsync (Sound, Setup menu) 103
LIVE/CLUB (sound program subcategory) 54
Liveness (Sound Program menu) 95
Load (Scene menu) 93
Low Frequency Effects (LFE) 130
M
MAC Address (MAC Address Filter, Setup menu) 108
MAC Address (Network, Information menu) 115
MAC Address Filter (Network, Setup menu) 108
Main Zone Set (Multi Zone, Setup menu) 109
Manual Setting (Wireless (Wi-Fi), Setup menu) 46
Manual Setup (Speaker, Setup menu) 100
Manual speaker configuration 100
Manual station preset (FM/AM radio) 59
Max Volume (Sound, Setup menu) 104
Max Volume (Zone2 Set, Setup menu) 110
Measurement result (YPAO) 39
Media sharing setup 69
Memory Guard (Function, Setup menu) 112
Menu language selection 33
MHL Overloaded (error indication) 127
APPENDIX
➤ Index
En
143
MHL-compatible mobile device 29
MON.CHK (ADVANCED SETUP menu) 117
Monaural Mix (Sound Program menu) 96
Monaural reception (FM radio) 58
Monitor check 117
Mono Movie (sound program) 53
MOVIE (sound program category) 53
MOVIE THEATER (sound program subcategory)
Multi measurement (YPAO) 37
Multi Zone (Information menu) 115
Multi Zone (Setup menu) 109
Multiple room playback 78
Multi-zone 78
MUSIC (sound program category) 54
Music Video (sound program) 54
Muting 50
Out of Phase (YPAO warning message) 41
Output (Audio Signal, Information menu) 114
Over Distance (YPAO warning message) 41
P
53
N
NAS (Network Attached Storage) 30
NAS content playback 70
Network (Information menu) 115
Network (Setup menu) 107
Network Attached Storage (NAS) 30
Network Connection (Network, Information menu) 115
Network Connection (Network, Setup menu) 107
Network information 115
Network Name (Network, Information menu) 115
Network Name (Network, Setup menu) 109
Network Standby (Network, Setup menu) 108
No content (error indication) 127
No device (error indication) 127
No F.PRNS SP (YPAO error message) 40
No Front SP (YPAO error message) 40
No MIC (YPAO error message) 40
No Signal (YPAO error message) 40
No Sur. SP (YPAO error message) 40
Noisy (YPAO error message) 40
NTSC (TV FORMAT, ADVANCED SETUP menu) 117
O
Option menu
87
PAL (TV FORMAT, ADVANCED SETUP menu) 117
Panorama (Sound Program menu) 96
Parametric EQ (Speaker, Setup menu) 102
Party mode 82
Party Mode Set (Multi Zone, Setup menu) 110
PC content playback 70
PIN Code (Wireless (Wi-Fi), Setup menu) 47
Please wait (error indication) 127
Power Amp Assign (Speaker, Setup menu) 100
Power management 112
Power Mode (DC OUT, Setup menu) 111
Preset station selection (FM/AM radio) 59
Program Service (Radio Data System) 60
Program Type (Radio Data System) 60
Pure Direct 57
PURE DIRECT (sound mode) 57
Q
Q factor
102
R
Radio Data System information 60
Radio Data System tuning 60
Radio Text (Radio Data System) 60
Rear panel (part names and functions) 11, 12
RemID Mismatch (error indication) 127
Remote control (part names and functions) 13
Remote control ID setting 116
REMOTE ID (ADVANCED SETUP menu) 116
Remote ID (System, Information menu) 115
Rename (input name) 91
Rename (network name) 109
Rename (scene name) 94
Rename/Icon Select (Input menu) 91
Rename/Icon Select (Scene menu) 94
Repeat (iPod, Option menu) 65
Repeat (PC/NAS, Option menu) 72
Repeat (USB storage device, Option menu) 68
Reset (Scene menu) 94
Resolution (Video Mode, Setup menu) 105
Reverb Delay (Sound Program menu) 96
Reverb Level (Sound Program menu) 96
Reverb Time (Sound Program menu) 96
Reverse (Wiring, YPAO measurement result) 39
Roleplaying Game (sound program) 54
Room Size (Sound Program menu) 95
S
Sampling (Audio Signal, Information menu) 114
Save (Scene menu) 93
SBR → SBL (YPAO error message) 40
Scene configuration 51
SCENE function 51
SCENE link playback 51
Scene menu 92
Sci-Fi (sound program) 53
Security (Network, Information menu) 115
Security Key (Network, Information menu) 115
Setup menu 97
Share Wi-Fi Settings (iOS)
(Wireless (Wi-Fi), Setup menu) 43
Short Message (Display Set, Setup menu) 110
Shuffle (iPod, Option menu) 65
Shuffle (PC/NAS, Option menu) 72
Shuffle (USB storage device, Option menu) 68
Signal information 114
SILENT CINEMA 55
Simple play (iPod) 65
Single measurement (YPAO) 36
Size (YPAO measurement result) 39
Sleep timer 13
Sleep timer (Zone2) 81
Sound (Setup menu) 103
Sound field effect 53
Sound mode selection 52
Sound program 53, 54
APPENDIX
➤ Index
En
144
Sound Program menu 94
SP IMP. (ADVANCED SETUP menu) 116
Speaker (Setup menu) 100
Speaker impedance 15
Speaker Impedance (System, Information menu) 115
Speaker impedance setting 18, 116
Speaker placement 15
Spectacle (sound program) 53
Sports (sound program) 54
SSID 130
SSID (Network, Information menu) 115
Standard (sound program) 53
Standby Sync (HDMI Control, Setup menu) 106
Standby Through (HDMI, Setup menu) 107
Station preset (FM/AM radio) 59
STEREO (sound program subcategory) 54
Stereo reception (FM radio) 58
STRAIGHT (sound mode) 56
Straight decode 56
Subnet Mask (IP Address, Setup menu) 108
Subnet Mask (Network, Information menu) 115
Subwoofer (Speaker, Setup menu) 101
Subwoofer Trim (Subwoofer/Bass, Option menu) 89
Subwoofer/Bass (Option menu) 89
SUR.DECODE (sound mode) 56
Surround (Speaker, Setup menu) 100
Surround Back (Speaker, Setup menu) 101
Surround Back Initial Delay (Sound Program menu) 95
Surround Back Liveness (Sound Program menu) 95
Surround Back Room Size (Sound Program menu) 95
Surround decoder 56
Surround Initial Delay (Sound Program menu) 95
Surround Liveness (Sound Program menu) 95
Surround Room Size (Sound Program menu) 95
SW.Trim (Subwoofer/Bass, Option menu) 89
System (Information menu) 115
System ID (System, Information menu) 115
T
Target Zone (Trigger Output, Setup menu)
111
Test Tone (Speaker, Setup menu) 103
The Bottom Line (sound program) 54
The Roxy Theatre (sound program) 54
Tone Control (Option menu) 88
TP (Traffic Program) 60
Traffic information (Radio Data System) 60
Traffic Program (FM radio, Option menu) 60
Treble (Tone Control, Option menu) 88
Trigger function 32
Trigger Mode (Trigger Output, Setup menu) 111
Trigger Output (Function, Setup menu) 111
TU (ADVANCED SETUP menu) 117
Tuner Frq. Step (System, Information menu) 115
TV Audio Input (HDMI Control, Setup menu) 106
TV FORMAT (ADVANCED SETUP menu) 117
TV Format (System, Information menu) 115
Volume Interlock (Input menu) 92
VPS (Virtual Presence Speaker) 7
U
Y
Unable to play (error indication) 127
UPDATE (ADVANCED SETUP menu) 118
USB Overloaded (error indication) 127
USB storage device content playback 66
User Cancel (YPAO error message) 40
Yamaha Parametric room
Acoustic Optimizer (YPAO) 34
YPAO
(Yamaha Parametric room Acoustic Optimizer)
YPAO error message 40
YPAO microphone 34
YPAO Vol. (YPAO Volume, Option menu) 88
YPAO Volume (Option menu) 88
YPAO warning message 41
V
V.Out (Input Settings, Option menu) 89
VERSION (ADVANCED SETUP menu) 118
Version error (error indication) 127
Video (Setup menu) 105
Video Mode (Video, Setup menu) 105
Video Out (Input Settings, Option menu) 89
Video Process. (Option menu) 89
Video Processing (Option menu) 89
Video Signal (Information menu) 114
Video signal flow 133
Video signal type setting 117
Video/audio input jack combination 26
Virtual CINEMA DSP 55
Virtual CINEMA FRONT 55
Virtual Presence Speaker (VPS) 7
Voltage selection 32
W
Wallpaper (Display Set, Setup menu) 110
Web control 83
Wi-Fi 130
Wired (Network Connection, Setup menu) 107
Wired/Wireless (Network, Information menu) 115
Wireless (Wi-Fi)
(Network Connection, Setup menu) 43, 107
Wireless Direct
(Network Connection, Setup menu) 48, 107
Wiring (YPAO measurement result) 39
WPS 130
WPS Button (Wireless (Wi-Fi), Setup menu) 45
WPS button configuration 44
34
Z
Zone Rename (Main Zone Set, Setup menu) 109
Zone Rename (Zone2 Set, Setup menu) 110
Zone2 Set (Multi Zone, Setup menu) 110
APPENDIX
➤ Index
En
145
© 2014 Yamaha Corporation YG105B0/EN
Download PDF
Similar pages