Industry-specific Ethernet Switches
PT-7728 Series
IEC 61850-3 24+4G-port Layer 2 Gigabit modular managed rackmount
Ethernet switches
››IEC 61850-3, IEEE 1613 (power substations), and EN 50121-4
(railway applications) compliant
››Built-in MMS server based on IEC 61850-90-4 switch data
modeling for power SCADA
››Complies with a portion of EN 50155 specifications
››Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250
switches), RSTP/STP, and MSTP for network redundancy
››VLAN Unaware: Supports priority-tagged frames to be received
by specific IEDs
››Up to 12 ports with M12 connectors
››Isolated redundant power supplies with universal 24 VDC, 48
VDC, or 110/220 VDC/VAC power supply range
››-40 to 85°C operating temperature range
Introduction
The PowerTrans PT-7728 is designed to meet the demands of power
substation automation systems (IEC 61850-3, IEEE 1613), and
railway applications (EN 50121-4), and also features critical packet
prioritization (GOOSE, SMVs, and PTP) and a built-in MMS server. The
PT-7728’s Gigabit and Fast Ethernet backbone, redundant ring, and
24 VDC, 48 VDC, or 110/220 VDC/VAC dual isolated redundant power
supplies increase the reliability of your communications and save on
cabling/wiring costs. The modular design of the PT-7728 also makes
network planning easy, and allows greater flexibility by letting you
install up to 4 Gigabit ports and 24 Fast Ethernet ports. Along with the
optional front or rear wiring, these features together make the PT-7728
suitable for a variety of industrial applications.
General Features and Benefits
•
•
•
•
•
•
•
•
Built-in MMS server for integration with power SCADA systems
Switch data modeling based on the IEC 61850-90-4 standard
IPv6 Ready logo awarded (IPv6 Logo Committee certified)
Software-based IEEE 1588v2 PTP (Precision Time Protocol) for
time synchronization of networks
VLAN Unaware: Supports priority-tagged frames to be received by
specific IEDs
DHCP Option 82 for IP address assignment with different policies
EtherNet/IP and Modbus/TCP industrial Ethernet protocols
supported
Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250
switches), RSTP/STP, and MSTP for network redundancy
• IGMP snooping and GMRP for filtering multicast traffic from
industrial Ethernet protocols
• Supports advanced VLAN capability with Q-in-Q tagging
• IEEE 802.3ad, LACP for optimum bandwidth utilization
• Bandwidth management prevents unpredictable network status
• Multi-port mirroring for online debugging
• Automatic warning by exception through email, relay output
• RMON for efficient network monitoring and proactive capability
• Automatic recovery of connected device’s IP addresses
• Line-swap fast recovery
• Configurable by web browser, Telnet/serial console, CLI, Windows
utility, and ABC-01 automatic backup configurator
Cybersecurity Features
• User passwords with multiple levels of security protect against
unauthorized configuration
• SSH/HTTPS is used to encrypt passwords and data
• Lock switch ports with 802.1X port-based network access control
so that only authorized clients can access the port
• Disable one or more ports to block network traffic
Specifications
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
1
• 802.1Q VLAN allows you to logically partition traffic transmitted
between selected switch ports
• Secure switch ports so that only specific devices and/or MAC
addresses can access the ports
• RADIUS/TACACS+ allows you to manage passwords from a central
location
• SNMPv3 provides encrypted authentication and access security
Modular Rackmount Ethernet Switch System, PT-7728
Slot 1
Slot 2
Slot 3
Slot 4
w w w. m o x a . c o m
Industry-specific Ethernet Switches
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Software Features
Management: IPv4/IPv6, SNMPv1/v2c/v3, DHCP Server/Client, BootP,
TFTP, SMTP, RARP, HTTP, HTTPS, Telnet, DHCP Option 66/67/82,
LLDP, Flow Control, Back Pressure Flow Control, SNMP Inform, Port
Mirror, Fiber Check, Syslog, RMON
Filter: IGMPv1/v2, GMRP, GVRP, 802.1Q VLAN, VLAN Unaware,
Q-in-Q VLAN, GVRP
Redundancy Protocols: STP/RSTP, MSTP, Turbo Ring v1/v2, Turbo
Chain, Link Aggregation
Security: RADIUS, TACACS+, SSL, SSH, Port Lock, Broadcast Storm
Protection
Time Management: SNTP, NTP Server/Client, IEEE 1588v2 PTP
(software-based)
Industrial Protocols: EtherNet/IP, Modbus/TCP
MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge
MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Power Substation: MMS, IEC 61850 QoS
Switch Properties
Priority Queues: 4
Max. Number of VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
Interface
Fast Ethernet: Slots 1, 2, and 3 for combinations of 2, 4, 6, or 8-port
PM-7200 Fast Ethernet modules with 10/100BaseT(X) (TP/M12
interface), 100BaseFX (SC/ST/MTRJ connector), or 100BaseSFP.
Gigabit Ethernet: Slot 4 for 2 or 4-port PM-7200 Gigabit Ethernet
combo module, 10/100/1000BaseT(X) or 1000BaseSFP
Console Port: RS-232 (RJ45)
Alarm Contact: 1 relay output with current carrying capacity of 3 A @
30 VDC or 3 A @ 240 VAC
Power Requirements
Operating Voltage:
• 18 to 36 V (24 VDC)
• 36 to 72 V (48 VDC)
• 88 to 300 VDC, 85 to 264 VAC (110/220 VDC/VAC)
Input Current: (all ports are equipped with fiber)
• Max. 2.38 A @ 24 VDC
• Max. 1.12 A @ 48 VDC
• Max. 0.59/0.30 A @ 110/220 VDC
• Max. 0.49/0.26 A @ 110/220 VAC
Overload Current Protection: Present
Connection: 10-pin terminal block
Reverse Polarity Protection: Present
Physical Characteristics
Housing: Aluminum alloy
IP Rating: IP30 protection
Dimensions: 440 x 44 x 325 mm (17.32 x 1.73 x 12.80 in)
Weight: 5900 g (13.11 lb)
Installation: 19-inch rack mounting
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F), cold start
requires min. of 100 VAC at -40°C
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
Safety: UL 60950-1
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 35 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
IEC 61000-4-11
Rail Traffic: EN 50155*, EN 50121-4
*Complies with a portion of EN 50155 specifications.
Note: Please check Moxa’s website for the most up-to-date certification status.
Transportation: NEMA TS2
Electrical Substation: IEC 61850-3, IEEE 1613
MTBF (mean time between failures)
Input Voltage:
• 24 VDC
• 48 VDC
• 110/220 VDC/VAC
Time: 393,828 hrs
Standard: Telcordia SR332
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Note: Compliant with EN 50155 on 24/48/110 VDC
Dimensions
Unit: mm (inch)
Ø6
440 (17.32)
480 (18.90)
31.8
(1.25)
37.9 (1.49)
)
.25
0
(Ø
.3
Front View
5.6 (0.22)
Side View
44 (1.73)
44 (1.73)
Top View
325 (12.80)
349.3 (13.75)
Rear View
462.6 (18.21)
2
w w w. m o x a . c o m
Industry-specific Ethernet Switches
Ordering Information
Step 1: Select Ethernet switch system
Step 2: Select interface modules
PM-7200 modules
PT-7728 with power supply
(Gigabit or Fast Ethernet)
Note: The PT-7728 Ethernet switch system is delivered without interface module.
See the PM-7200/7500 Series datasheet to choose PM-7200 interface modules.
PT-7728 Modular Rackmount Ethernet Switch System
The PT-7728 switch system consists of 16 modular managed rackmount Ethernet switch systems with 3 slots for Fast Ethernet modules, and 1 slot for
a Gigabit Ethernet module. A total of 28 or 24+4G ports can be installed, and the switch can be used in a temperature range from -40 to 85°C.
Available Models
Power Supply
Front Cabling,
Rear Cabling,
Front Display
Front Display
Isolated Power Supply 1
24 VDC
48 VDC
Isolated Power Supply 2
HV: 110/220
VDC/VAC
24 VDC
48 VDC
HV: 110/220
VDC/VAC
PT-7728-F-24
PT-7728-R-24
1
–
–
–
–
–
PT-7728-F-24-24
PT-7728-R-24-24
1
–
–
1
–
–
PT-7728-F-24-HV
PT-7728-R-24-HV
1
–
–
–
–
1
PT-7728-F-48
PT-7728-R-48
–
1
–
–
–
–
PT-7728-F-48-48
PT-7728-R-48-48
–
1
–
–
1
–
PT-7728-F-48-HV
PT-7728-R-48-HV
–
1
–
–
–
1
PT-7728-F-HV
PT-7728-R-HV
–
–
1
–
–
–
PT-7728-F-HV-HV
PT-7728-R-HV-HV
–
–
1
–
–
1
Note: The PT-7728 Ethernet switch systems provide combinations of 1 slot for a Gigabit Ethernet interface module, 3 slots for Fast Ethernet interface modules. See the
PM-7200/7500 Series datasheet to select the PM-7200 Gigabit Ethernet and Fast Ethernet interface modules that you need for your own application.
PT-7728-F series
(Front Cabling, Front Display)
PT-7728-R series
(Rear Cabling, Front Display)
Gigabit/Fast Ethernet Modules for the PT-7728
PM-7200-4GTXSFP
PM-7200-2GTXSFP
PM-7200-1MSC
PM-7200-1MST
PM-7200-2MSC
PM-7200-2MST
PM-7200-2SSC
PM-7200-8TX
PM-7200-2MSC4TX
PM-7200-2MST4TX
PM-7200-2SSC4TX
PM-7200-4MSC2TX
PM-7200-4MST2TX
PM-7200-4SSC2TX
PM-7200-6MSC
PM-7200-6MST
PM-7200-6SSC
PM-7200-8SFP
PM-7200-4M12
PM-7200-8MTRJ
PM-7200-4TX-PTP
PM-7200-4MST-PTP
PM-7200-4MSC-PTP
PM-7200-1BNC2MST-PTP
Interface Modules
Slot 1
–
–
–
–
–
–
–













–
–
–
–
Slot 2
–
–
–
–
–
–
–













–
–
–
–
Slot 3
–
–
–
–
–
–
–













–
–
–
–
Slot 4


–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Optional Accessories (can be purchased separately)
MXview: Moxa industrial network management software with 50, 100, 250, 500, 1000, or 2000 nodes
EDS-SNMP OPC Server Pro: OPC server software that works with all SNMP devices
ABC-01 Series: Configuration backup and restoration tool for managed Ethernet switches, 0 to 60°C
operating temperature
3
Package Checklist
•
•
•
•
•
•
•
PT-7728 switch
Serial Cable: CN20070
Protective caps for unused ports
2 rackmount ears
Documentation and software CD
Hardware installation guide
Warranty card
w w w. m o x a . c o m
Industry-specific Ethernet Switches
PM-7200 Series
Gigabit and Fast Ethernet modules for PT and IKS series rackmount Ethernet
switches
Specifications
Gigabit Ethernet Interface Modules, PM-7200-2G/4G Series
Interface
RJ45 Ports: 10/100/1000BaseT(X) auto negotiation speed, and auto
MDI/MDI-X connection
Fiber Ports: 1000BaseSFP slots
PM-7200-4GTXSFP
Note: The PM-7200-2G/4G series Gigabit Ethernet combo modules support 2 or
4 SFP slots. See the SFP-1G series Gigabit Ethernet information below to select
the modules for your application.
PM-7200-2GTXSFP
Fast Ethernet Interface Modules, PM-7200 Series
PM-7200-8TX
PM-7200-6MSC
PM-7200-6SSC
PM-7200-6MST
PM-7200-4MSC2TX
PM-7200-4SSC2TX
PM-7200-4MST2TX
PM-7200-2MSC4TX
PM-7200-2SSC4TX
PM-7200-2MST4TX
PM-7200-2MSC
PM-7200-2SSC
PM-7200-2MST
PM-7200-1MSC
PM-7200-1MST
PM-7200-8SFP*
PM-7200-4M12
PM-7200-8MTRJ
PM-7200-4MST-FL
PM-7200-4TX-PTP
PM-7200-4MSC-PTP
PM-7200-4MST-PTP
PM-7200-1BNC2MST-PTP
*See the SFP-1FE series Fast Ethernet information below to select modules for your system.
4
w w w. m o x a . c o m
Industry-specific Ethernet Switches
Interface
Optical Fiber
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex
mode, and auto MDI/MDI-X connection
Fiber Ports: 100BaseFX ports (SC/ST/MTRJ or SFP LC connector)
M12 Ports: 10/100BaseT(X) auto negotiation speed, and auto MDI/
MDI-X connection
BNC Ports: Time clock signal PPS (pulses per second) output for IEEE
1588 time synchronization
100BaseFX
10BaseFL
Single-mode,
Multi-mode
Single-mode
Wavelength
1300 nm
1310 nm
1550 nm
820 nm
Max. TX
-10 dBm
0 dBm
0 dBm
-7 dBm
Min. TX
-20 dBm
-5 dBm
-5 dBm
-16 dBm
RX
Sensitivity
-32 dBm
-34 dBm
-34 dBm
-34 dBm
Link
Budget
12 dB
29 dB
29 dB
18 dB
Typical
Distance
5 km a
4 km b
40 km c
80 km d
2.7 km e
Saturation
-6 dBm
-3 dBm
-3 dBm
–
80 km
Multi-mode
a. 50/125 μm, 800 MHz*km fiber optic cable
b. 62.5/125 μm, 500 MHz*km fiber optic cable
c. 9/125 μm single-mode fiber optic cable
d. 9/125 μm single-mode fiber optic cable (80 km)
e. Based on the 20 MBd data rate
Ordering Information
Rackmount Ethernet Switch System and Interface Module Compatibility Chart
Modular Rackmount Ethernet Switch System:
PT-7828/PT-7728-PTP/
PT-7728
2
4
6
8
3
5
7
M1
M2
M3
M4
PT-7710
PT-7728
2
M1
1
STAT
PWR1
PWR2
2
4
6
1
STAT
8
PWR1
MASTER
COUPLER
1
2
MODE
SPEED
FDX/HDX
RING PORT
COUPLER
PORT
3
4
5
6
4
6
8
3
5
7
M1
M2
PT-7710
2
M1
PWR1
PWR2
SPEED
FDX/HDX
2
7
FAULT
MASTER
COUPLER
1
M2
FAULT
M3
3
5
7
2
4
6
8
1
3
5
7
SPEED
FDX/HDX
LNK/ACT
RING PORT
COUPLER
PORT
MODE
LNK/ACT
MODE
M4
Slot 1 Slot 2 Slot 3 Slot 4
6
8
5
7
14
16
11
13
15
20
22
2
19
21
1
3
12
8
1
4
9
18
17
10
1
STAT
PWR2
M2
FAULT
LNK/ACT
IKS-6324
2
4
6
8
10
12
14
16
18
20
22
1
3
5
7
9
11
13
15
17
19
21
Slot 1 Slot 2
Slot 1
IEEE 1588
Interface
Modules
PM-7200-8TX
PM-7200-2MSC4TX
PM-7200-2MST4TX
PM-7200-2SSC4TX
PM-7200-4MSC2TX
PM-7200-4MST2TX
PM-7200-4SSC2TX
PM-7200-6MSC
PM-7200-6MST
PM-7200-6SSC
PM-7200-8SFP*
PM-7200-4M12
PM-7200-8MTRJ
PM-7200-4MST-FL
IKS-6324
PM-7200-1MSC/2MSC
–
–
–
–
–
–
P
P
P
P
P
P
P
P
P
P
P
P
P
P
–
–
P
P
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Slots 1-3
P
P
P
–
–
–
–
–
–
P
P
P
P
P
P
P
P
P
P
P
P
P
P
Slot 4
–
–
–
P
P
P
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Slot 1
–
–
–
–
–
–
–
–
–
P
P
P
P
P
P
P
P
P
P
P
P
P
P
Slot 2
–
–
–
–
–
P
P
P
P
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Slot 1
–
–
–
–
–
P
P
P
P
–
–
–
–
–
–
–
–
–
–
–
–
–
–
PM-7200-2GTXSFP
–
–
PM-7200-4GTXSFP
PM-7200-2SSC
PT-7710
PM-7200-1BNC2MST-PTP
–
–
PM-7200-4MST-PTP
–
Slot 4
PM-7200-4MSC-PTP
PM-7200-1MST/2MST
PT-7728-PTP
Interface Modules
Slots 1-3
PM-7200-4TX-PTP
PT-7828
PT-7728
IKS-6324
M1
M1
Gigabit Ethernet Modules, PM-7200-2G/4G Series
Available Models
Port Interface
Combo Port, 10/100/1000BaseT(X) or 1000BaseSFP*
PM-7200-2GTXSFP
2
PM-7200-4GTXSFP
4
*The PM-7200-2G/4G series Gigabit Ethernet combo modules support 2 or 4 SFP slots.
5
w w w. m o x a . c o m
Industry-specific Ethernet Switches
Fast Ethernet Modules, PM-7200 Series
Port Interface
10/100BaseT(X)
Available Models
10BaseFL
Multi-mode,
100BaseFX
Multi-mode,
Multi-mode,
Multi-mode,
Single mode,
BNC
M12
PM-7200-8TX
8
–
–
–
–
–
–
–
–
–
PM-7200-6MSC
–
–
–
6
–
–
–
–
–
–
PM-7200-6MST
–
–
–
–
6
–
–
–
–
–
PM-7200-6SSC
–
–
–
–
–
–
6
–
–
–
PM-7200-4MSC2TX
2
–
–
4
–
–
–
–
–
–
PM-7200-4MST2TX
2
–
–
–
4
–
–
–
–
–
PM-7200-4SSC2TX
2
–
–
–
–
–
4
–
–
–
PM-7200-2MSC4TX
4
–
–
2
–
–
–
–
–
–
PM-7200-2MST4TX
4
–
–
–
2
–
–
–
–
–
PM-7200-2SSC4TX
4
–
–
–
–
–
2
–
–
–
PM-7200-2MSC
–
–
–
2
–
–
–
–
–
–
PM-7200-2MST
–
–
–
–
2
–
–
–
–
–
PM-7200-2SSC
–
–
–
–
–
–
2
–
–
–
PM-7200-1MSC
–
–
–
1
–
–
–
–
–
–
PM-7200-1MST
–
–
–
–
1
–
–
–
–
–
PM-7200-8SFP
–
–
–
–
–
–
–
–
8
–
PM-7200-4M12
–
4
–
–
–
–
–
–
–
–
PM-7200-8MTRJ
–
–
–
–
–
8
–
–
–
–
PM-7200-4MST-FL
–
–
4
–
-
–
–
–
–
–
PM-7200-4TX-PTP
4
–
–
–
–
–
–
–
–
–
PM-7200-4MSC-PTP
–
–
–
4
–
–
–
–
–
–
PM-7200-4MST-PTP
–
–
–
–
4
–
–
–
–
–
PM-7200-1BNC2MST-PTP
–
–
–
–
2
–
–
–
–
1
Connector
SC Connector
SC Connector,
PPS output,
100BaseSFP
TP
ST Connector SC Connector ST Connector
MTRJ
Single mode,
connector
80 km
Package Checklist
• PM-7200 interface modules
• Warranty card
6
w w w. m o x a . c o m
Industry-specific Ethernet Switches
SFP-1G Series
1-port Gigabit Ethernet SFP modules
››Digital Diagnostic Monitor Function
››-40 to 85°C operating temperature range (T models)
››IEEE 802.3z compliant
››Differential LVPECL inputs and outputs
››TTL signal detect indicator
››Hot pluggable LC duplex connector
››Class 1 laser product, complies with EN 60825-1
EN : 60825
Specifications
Interface
Ethernet Ports: 1
Connectors: Duplex LC Connector or Simplex LC Connector (WDM-type only)
Optical Fiber
SFP-SX
Multi-Mode
OM1
OM2
300 m
550 m
850
Gigabit Ethernet SFP
SFP-LX
SFP-LH
SFP-LHX
Single-Mode Single-Mode Single-Mode
G.652
G.652
G.652
10 km
30 km
40 km
1310
1310
1310
SFP-ZX
SFP-EZX
SFP-EZX-120
Transceiver Type
Single-Mode Single-Mode Single-Mode
Fiber Cable Type
G.652
G.652
G.652
Typical Distance
80 km
110 km
120 km
Typical (nm)
1550
1550
1550
TX Range
Wave830 to 860
1270 to 1355
1280 to 1355 1280 to 1355 1280 to 1340 1530 to 1570 1530 to 1570 1530 to 1570
(nm)
length
RX Range
770 to 860
1260 to 1610
1260 to 1610 1260 to 1610 1260 to 1610 1260 to 1610 1260 to 1610 1100 to 1600
(nm)
TX Range
-4 to -9.5
-1 to -9
-3 to -9
-3 to -8
+3 to -4
+5 to 0
+5 to 0
+3 to -2
(dBm)
RX Range
0 to -18
-1 to -19
-3 to -21
-3 to -23
-1 to -24
-1 to -24
-9 to -30
-8 to -33
(dBm)
Optical
Power
Link Budget
8.5
10
12
15
20
24
30
31
(dB)
Dispersion
4.3
3.6
5
5
1
1
1
1
1
2
Penalty (dB)
Note: When connecting the SFP-LHX, ZX, EZX, or EZX-120, we recommened using an attenuator to prevent the transceiver from being damaged by excessive optical power.
SFP-10A
SFP-LSX
Multi-Mode
OM2
OM1
1 km
2 km
1310
SFP-10B
WDM Gigabit Ethernet SFP
SFP-20A
SFP-20B
Single-Mode
G.652
20 km
TX 1310, RX 1550
TX 1550, RX 1310
SFP-40A
SFP-40B
Transceiver Type
Single-Mode
Single-Mode
Fiber Cable Type
G.652
G.652
Typical Distance
10 km
40 km
Typical (nm)
TX 1310, RX 1550
TX 1550, RX 1310
TX 1310, RX 1550
TX 1550, RX 1310
TX Range
Wave1270 to 1355
1530 to 1570
1270 to 1355
1530 to 1570
1290 to 1330
1530 to 1570
(nm)
length
RX Range
1480 to 1580
1260 to 1360
1480 to 1580
1260 to 1360
1480 to 1580
1260 to 1360
(nm)
TX Range
-3 to -9
-2 to -8
+2 to -3
(dBm)
RX Range
-3 to -21
-2 to -23
-1 to -23
(dBm)
Optical
Power
Link Budget
12
15
20
(dB)
Dispersion
2
3
1
Penalty (dB)
Note: WDM-type SFP modules must be used in pairs (e.g., SFP-1G10ALC and SFP-1G10BLC)
Note: When connecting the SFP-40A and 40B, we recommend using an attenuator to prevent damage caused by excessive optical power.
Typical Distance: To reach the typical distance of specified fiber transceiver, please refer to formula: Link budget(dB) > dispersion penalty(dB) + total
link loss(dB).
7
w w w. m o x a . c o m
Industry-specific Ethernet Switches
Power Requirements
Warranty
Power Consumption: Max. 1 W
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
Safety: CE, FCC, TÜV (EN 60825), UL 60950-1
Marine: DNV, GL
Dimensions
Unit: mm (inch)
SFP-1G Series
SFP-1G Series (WDM Type)
13.4 (0.5)
13.4 (0.5)
Top View
Top View
55.5 (2.2)
6.3 (0.2)
56.6 (2.2)
13.4 (0.5)
11.28 (0.4)
55.5 (2.2)
8.15
(0.3)
8.4 (0.3)
13.4 (0.5)
8.2
(0.3)
8.4 (0.3)
45.0 (1.8)
2.6 (0.1)
8.0 (0.3)
Rear View
Rear View
13.7 (0.5)
14.0 (0.6)
Side View
13.7 (0.5)
14.0 (0.6)
Side View
Ordering Information
Gigabit Ethernet SFP Models
Standard Temperature
Wide Temperature
Models (0 to 60˚C)
Models (-40 to 85˚C)
Transeiver Type
WDM Gigabit Ethernet SFP Models
Typical Distance
Wide
Standard
Temperature
(0 to 60˚C)
Temperature
Transeiver Type
Typical Distance
(-40 to 85˚C)
SFP-1GSXLC
SFP-1GSXLC-T*
Multi-Mode
300/550 m
SFP-1G10ALC
SFP-1G10ALC-T
Single-Mode
10 Km
SFP-1GLSXLC
SFP-1GLSXLC-T
Multi-Mode
1/2 Km
SFP-1G10BLC
SFP-1G10BLC-T
Single-Mode
10 Km
SFP-1GLXLC
SFP-1GLXLC-T
Single-Mode
10 Km
SFP-1G20ALC
SFP-1G20ALC-T
Single-Mode
20 Km
SFP-1GLHLC
SFP-1GLHLC-T
Single-Mode
30 Km
SFP-1G20BLC
SFP-1G20BLC-T
Single-Mode
20 Km
SFP-1GLHXLC
SFP-1GLHXLC-T
Single-Mode
40 Km
SFP-1G40ALC
SFP-1G40ALC-T
Single-Mode
40 Km
SFP-1GZXLC
SFP-1GZXLC-T
Single-Mode
80 Km
SFP-1G40BLC
SFP-1G40BLC-T
Single-Mode
40 Km
SFP-1GEZXLC
–
Single-Mode
110 Km
–
–
–
–
SFP-1GEZXLC-120
–
Single-Mode
120 Km
–
–
–
–
*SFP-1GSXLC-T: -20 to 75˚C operating temperature
Available Models
Please refer to the Moxa Ethernet SFP Transceiver Products Compatibility Matrix on the next page for available models.
8
Package Checklist
• SFP-1G module
• Warranty card
w w w. m o x a . c o m
Industry-specific Ethernet Switches
SFP-1FE Series
1-port Fast Ethernet SFP modules
››Digital Diagnostic Monitor Function
››IEEE 802.3u compliant
››Differential PECL inputs and outputs
››TTL signal detect indicator
››Hot pluggable LC duplex connector
››Class 1 laser product; complies with EN 60825-1
EN : 60825
Specifications
Interface
Environmental Limits
Ethernet Ports: 1
Connectors: Duplex LC Connector
Operating Temperature: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Optical Fiber
Fast Ethernet SFP
SFP-S
SingleMulti-Mode
Mode
SFP-M
Transceiver Type
Fiber Cable Type
G.652
G.652
40 km
80 km
1310
1310
1550
1280 to 1340
1280 to
1340
1530 to
1570
1100 to 1650
1100 to
1600
1100 to
1600
2 km
800
MHz*Km
4 km
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
Unit: mm (inch)
Top View
13.4 (0.5)
45.0 (1.8)
55.5 (2.2)
6.3 (0.2)
56.6 (2.2)
Side View
13.7 (0.5)
14.0 (0.6)
Power Requirements
Warranty
8.2
(0.3)
8.4 (0.3)
TX Range
-8 to -18
0 to -5
0 to -5
(dBm)
RX Range
-3 to -32
-3 to -34
-3 to -34
(dBm)
Optical Link
Power Budget
14
29
29
(dB)
Dispersion
Penalty
2
3
1
1
(dB)
Note: When connecting the SFP-S or L, we recommend using an attenuator to
prevent damage caused by excessive optical power.
Safety: CE, FCC, TÜV, UL 60950-1
Marine: DNV, GL
13.4 (0.5)
Typical Distance
Typical
(nm)
Wave- TX Range
length (nm)
RX Range
(nm)
OM1/OM2
62.5/125,
50/125 μm
Standards and Certifications
SFP-L
SingleMode
Rear View
Power Consumption: Max. 1 W
Ordering Information
Available Models
Wide Temperature
(-40 to 85˚C)
SFP-1FEMLC-T
SFP-1FESLC-T
SFP-1FELLC-T
Available Models
100BaseFX, Multi-Mode,
Port Interface
100BaseFX, Single-Mode,
100BaseFX, Single-Mode,
LC Connector, 4 km
1
–
–
LC Connector, 40 km
–
1
–
LC Connector, 80 km
–
–
1
Please refer to the Moxa Ethernet SFP Transceiver Products Compatibility Matrix on the next page for available models.
9
Package Checklist
• SFP-1FE module
• Warranty card
© Moxa Inc. All rights reserved. Updated Apr. 15, 2016. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.
Download PDF
Similar pages