o
nl
ow
D
ad
BL02801-101
EN
ed
m
fro
Before You Begin
w
w
DIGITAL CAMERA
nb
de
an
.v
w
FINEPIX T500 Series
For information on related products, visit our website at
http://www.fujifilm.com/products/digital_cameras/index.html
e
Thank you for your purchase
of this product. This manual
describes how to use your
FUJIFILM digital camera and
the supplied software. Be sure
that you have read and understood its contents and the
warnings in “For Your Safety”
(P ii) before using the camera.
.b
Owner’s Manual
re
or
First Steps
Basic Photography and Playback
More on Photography
More on Playback
Movies
Connections
Menus
Technical Notes
Troubleshooting
Appendix
o
nl
ow
D
ad
For Your Safety
ed
m
fro
IMPORTANT SAFETY INSTRUCTIONS
w
w
e
.b
re
or
nb
de
ii
an
Grounding or Polarization: This video product
is equipped with a polarized alternatingcurrent line plug (a plug having one blade
wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
Overloading: Do not overload wall outlets and
extension cords as this can result in a risk of
fire or electric shock.
Power-Cord Protection: Power-supply cords
should be routed so that they are not likely
to be walked on or pinched by items placed
upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.
.v
Installation
Power Sources: This video product should be
operated only from the type of power source
indicated on the marking label. If you are
not sure of the type of power supply to your
home, consult your appliance dealer or local
power company. For video products intended to operate from battery power, or other
sources, refer to the operating instructions.
Alternate Warnings: This video product is
equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type
power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding type plug.
w
• Read Instructions: All the safety and operating instructions should be read before the
appliance is operated.
• Retain Instructions: The safety and operating
instructions should be retained for future
reference.
• Heed Warnings: All warnings on the appliance and in the operating instructions
should be adhered to.
• Follow Instructions: All operating and use
instructions should be followed.
Accessories: Do not place this video product
on an unstable cart, stand, tripod, bracket, or
table. The video product may fall, causing
serious injury to a child or adult, and serious
damage to the appliance. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with
the video product. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
Ventilation: Slots and openings in the cabinet
are provided for ventilation, to ensure reliable
operation of the video product and to protect it from overheating, and these openings
must not be blocked or covered. The openings should never be blocked by placing the
video product on a bed, sofa, rug, or other An appliance and cart
combination should
similar surface.
be moved with care.
This video product should not be placed in a
Quick stops, excesbuilt-in installation such as a bookcase or rack
sive force, and uneven
unless proper ventilation is provided or the
surfaces may cause
manufacturer’s instructions have been adthe appliance and cart
hered to. This video product should never be
combination to overturn.
placed near or over a radiator or heat register.
Attachments: Do not use attachments not
recommended by the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video
product near water—for example, near a
bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming
pool, and the like.
o
nl
ow
D
For Your Safety
ad
w
w
e
.b
re
or
nb
de
an
.v
w
Antenna Lead
in Wire
m
Ground Clamp
mally follow the operating instructions. Adjust only those controls that are covered by
the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the video
Object and Liquid Entry: Never push objects
product to its normal operation.
of any kind into this video product through
openings as they may touch dangerous volt- When the video product exhibits a distinct
age points or short out parts that could result change in performance—this indicates a
in a fire or electric shock. Never spill liquid of need for service.
any kind on the video product.
Replacement Parts: When replacement parts
Use
Cleaning: Unplug this video product from the
wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
fro
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ed
Antennas
Outdoor Antenna Grounding: If an outside
antenna or cable system is connected to the
video product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and builtup static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70, provides
information with respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Lightning: For added protection for this video
product receiver during a lightning storm, or
when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the
video product due to lightning and powerline surges.
are required, be sure the service technician
has used replacement parts specified by the
manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or
other hazards.
Safety Check: Upon completion of any service
or repairs to this video product, ask the service technician to perform safety checks to
Service
Antenna
Electric Service
Servicing: Do not attempt to service this video determine that the video product is in proper
Discharge Unit
Equipment
product yourself as opening or removing cov- operating condition.
(NEC SECTION
ers may expose you to dangerous voltage or
810-20)
other hazards. Refer all servicing to qualified
Ground Clamps
Grounding service personnel.
Conductors Damage Requiring Service: Unplug this video
Power Service Grounding
(NEC SECTION product from the wall outlet and refer servicElectrode System (NEC ART
810-21) ing to qualified service personnel under the
250. PART H)
following conditions:
Power Lines: An outside antenna system • When the power-supply cord or plug is
should not be located in the vicinity of overdamaged.
head power lines or other electric light or • If liquid has been spilled, or objects have
power circuits, or where it can fall into such
fallen into the video product.
power lines or circuits. When installing an • If the video product has been exposed to
outside antenna system, extreme care should
rain or water.
be taken to keep from touching such power • If the video product has been dropped or
lines or circuits as contact with them might
the cabinet has been damaged.
be fatal.
If the video product does not operate nor-
iii
o
nl
ow
D
ad
For Your Safety
ed
Be sure to read these notes before use
m
fro
WARNING
w
w
Do not use the camera in the bathroom or shower. This can cause
a fire or electric shock.
re
or
nb
de
Do not use in
the bathroom or
shower
an
.v
• Make sure that you use your camera correctly. Read these safety
notes and your Owner’s Manual carefully before use.
• After reading these safety notes, store them in a safe place.
w
Safety Notes
CAUTION
This icon indicates that death or serious injury can result if the
information is ignored.
This icon indicates that personal injury or material damage can
result if the information is ignored.
The icons shown below are used to indicate the nature of the instructions which are to be observed.
Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an action that
must be performed (“Required”).
WARNING
Unplug from
power socket
Avoid exposure
to water
iv
If a problem arises, turn the camera off, remove the battery, and
disconnect and unplug the AC power adapter. Continued use of
the camera when it is emitting smoke, is emitting any unusual
odor, or is in any other abnormal state can cause a fire or electric shock. Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the camera. If water
or foreign objects get inside the camera, turn the camera off,
remove the battery, and disconnect and unplug the AC power
adapter. Continued use of the camera can cause a fire or electric shock. Contact your FUJIFILM dealer.
e
WARNING
Never attempt to change or take apart the camera (never open
the case). Failure to observe this precaution can cause fire or
electric shock.
.b
About the Icons
The icons shown below are used in this document to indicate the
severity of the injury or damage that can result if the information
indicated by the icon is ignored and the product is used incorrectly
as a result.
Do not
disassemble
Do not touch
internal parts
Should the case break open as the result of a fall or other accident,
do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the
damaged parts. Remove the battery immediately, taking care
to avoid injury or electric shock, and take the product to the
point of purchase for consultation.
Do not change, heat or unduly twist or pull the connection cord and
do not place heavy objects on the connection cord. These actions
could damage the cord and cause a fire or electric shock. If the
cord is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This can cause the
camera to fall or tip over and cause injury.
Never attempt to take pictures while in motion. Do not use the
camera while you are walking or driving a vehicle. This can
result in you falling down or being involved in a traffic accident.
Do not touch any metal parts of the camera during a thunderstorm.
This can cause an electric shock due to induced current from
the lightning discharge.
Do not use the battery except as specified. Load the battery as
shown by the indicator.
Do not heat, change or take apart the battery. Do not drop or subject
the battery to impacts. Do not store the battery with metallic products. Any of these actions can cause the battery to burst or leak
and cause fire or injury as a result.
Use only the battery or AC power adapters specified for use with this
camera. Do not use voltages other than the power supply voltage
shown. The use of other power sources can cause a fire.
If the battery leaks and fluid gets in contact with your eyes, skin or
clothing, flush the affected area with clean water and seek medical
attention or call an emergency number right away.
o
nl
ow
D
ad
For Your Safety
ed
m
fro
WARNING
w
Do not cover or wrap the camera or the AC power adapter in a cloth
or blanket. This can cause heat to build up and distort the casing or cause a fire.
When you are cleaning the camera or you do not plan to use the
camera for an extended period, remove the battery and disconnect
and unplug the AC power adapter. Failure to do so can cause a
fire or electric shock.
.b
re
or
nb
de
an
.v
w
e
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
Do not use in the presence of flammable objects, explosive gases,
or dust.
When carrying the battery, install it in a digital camera or keep it
in the hard case. When storing the battery, keep it in the hard case.
When discarding, cover the battery terminals with insulation tape.
Contact with other metallic objects or batteries could cause
the battery to ignite or burst.
Keep memory cards out of the reach of small children. Because
memory cards are small, they can be swallowed by children.
Be sure to store memory cards out of the reach of small children. If a child swallows a memory card, seek medical attention or call an emergency number.
CAUTION
CAUTION
w
Do not use the charger to charge batteries other than those specified here. The supplied battery charger is for use only with the
type of battery supplied with the camera. Using the charger to
charge conventional batteries or other types of rechargeable
batteries can cause the battery to leak fluid, overheat or burst.
Unplug from
power socket
When charging ends, unplug the charger from the power socket.
Leaving the charger plugged into the power socket can cause
a fire.
Using a flash too close to a person’s eyes may temporarily affect the
eyesight. Take particular care when photographing infants and
young children.
When a memory card is removed, the card could come out of the slot
too quickly. Use your finger to hold it and gently release the card.
Injury could result to those struck by the ejected card.
Request regular internal testing and cleaning for your camera.
Build-up of dust in your camera can cause a fire or electric
shock. Contact your FUJIFILM dealer to request internal cleaning every two years. Please note that this service is not free
of charge.
Do not use this camera in locations affected by oil fumes, steam, humidity or dust. This can cause a fire or electric shock.
Remove your fingers from the flash window before the flash fires.
Failure to observe this precaution could result in burns.
Do not leave this camera in places subject to extremely high temperatures. Do not leave the camera in locations such as a sealed
vehicle or in direct sunlight. This can cause a fire.
Keep the flash window clean and do not use the flash if the window
is obstructed. Failure to observe these precautions could cause
smoke or discoloration.
Keep out of the reach of small children. This product could cause
injury in the hands of a child.
Do not place heavy objects on the camera. This can cause the
heavy object to tip over or fall and cause injury.
Do not move the camera while the AC power adapter is still connected. Do not pull on the connection cord to disconnect the AC power
adapter. This can damage the power cord or cables and cause
a fire or electric shock.
Do not use the AC power adapter when the plug is damaged or the
plug socket connection is loose. This could cause a fire or electric
shock.
v
ed
■ Cautions: Handling the Battery
• Do not transport or store with metal objects
such as necklaces or hairpins.
• Do not expose to flame or heat.
• Do not disassemble or modify.
• Use with designated chargers only.
• Do not drop or subject to strong physical
shocks.
• Do not expose to water.
• Keep the terminals clean.
• The battery and camera body may become
warm to the touch after extended use. This
is normal.
AA Alkaline/Rechargeable Ni-MH Batteries/
AA lithium batteries
Read this section if your camera uses AA
alkaline or rechargeable AA Ni-MH batteries. Information on compatible battery
types may be found elsewhere in the camera
manual.
m
fro
w
w
e
.b
re
or
nb
de
an
.v
w
■ Charging the Battery
Charge the battery in the supplied battery
charger. Charging times will increase at ambient temperatures below +10 °C (+50 °F) or
above +35 °C (+95 °F). Do not attempt to
The following describes the proper use of charge the battery at temperatures above
batteries and how to prolong their life. Incor- 40 °C (+104 °F); at temperatures below 0 °C
rect use can shorten battery life or cause leak- (+32 °F), the battery will not charge.
age, overheating, fire, or explosion.
Do not attempt to recharge a fully charged
Li-ion Batteries
battery. The battery does not however need
Read this section if your camera uses a to be fully discharged before charging.
rechargeable Li-ion battery.
The battery may be warm to the touch immeThe battery is not charged at shipment. diately after charging or use. This is normal.
Charge the battery before use. Keep the bat■ Battery Life
tery in its case when not in use.
At normal temperatures, the battery can be
■ Notes on the Battery
recharged about 300 times. A noticeable deThe battery gradually loses its charge when crease in the length of time the battery will
not in use. Charge the battery one or two hold a charge indicates that it has reached
days before use.
the end of its service life and should be reBattery life can be extended by turning the placed.
The Battery and Power Supply
Note: Check the type of battery used in
your camera and read the appropriate
sections.
ad
o
nl
ow
D
For Your Safety
■ Cautions: Handling the Batteries
• Do not expose to water, flame, or heat, or
■ Storage
store in warm or humid conditions.
Battery capacity decreases at low tempera- Performance may be impaired if the battery is
tures; a depleted battery may not function at left unused for extended periods when fully • Do not transport or store with metal objects
such as necklaces or hairpins.
when cold. Keep a fully charged spare bat- charged. Run the battery flat before storing it.
tery in a warm place and exchange as nec- If the camera will not be used for an extended • Do not disassemble or modify the batteries
or battery casing.
essary, or keep the battery in your pocket or period, remove the battery and store it in a
other warm place and insert it in the camera dry place with an ambient temperature of • Do not subject to strong physical shocks.
only when shooting. Do not place the bat- from +15 °C to +25 °C (+59 °F to +77 °F). Do • Do not use batteries that are leaking, deformed, or discolored.
tery in direct contact with hand warmers or not store in locations exposed to extremes of
• Keep out of reach of infants and small chilother heating devices.
temperature.
dren.
• Insert in the correct orientation.
camera off when not in use.
vi
o
nl
ow
D
For Your Safety
ad
m
w
w
e
.b
re
or
nb
de
an
.v
w
If fluid from the battery comes into
contact with skin or clothing, flush
the affected area with water. If fluid
enters your eyes, immediately flush the
affected area with water and seek
medical attention. Do not rub your eyes.
Failure to observe this precaution could
result in permanent visual impairment.
The camera draws a small amount of current
even when off. Ni-MH batteries that have
been left in the camera for an extended period may be drawn down to the point that
they no longer hold a charge. Battery performance may also drop if the batteries are run
down in a device such as a flashlight. Use the
discharge option in the camera setup menu
to discharge Ni-MH batteries. Batteries that
no longer hold a charge even after repeatedly being discharged and recharged have
reached the end of their service life and must
be replaced.
AC Power Adapters (Available Separately)
This section applies to all camera models.
Use only FUJIFILM AC power adapters designated for use with this camera. Other adapters could damage the camera.
• The AC power adapter is for indoor use only.
• Be sure the DC plug is securely connected
to the camera.
• Turn the camera off before disconnecting
the adapter. Disconnect the adapter by the
plug, not the cable.
• Do not use with other devices.
• Do not disassemble.
• Do not expose to high heat and humidity.
• Do not subject to strong physical shocks.
• The adapter may hum or become hot to the
touch during use. This is normal.
• If the adapter causes radio interference,
reorient or relocate the receiving antenna.
fro
If the batteries leak, clean the battery
compartment thoroughly before inserting new batteries.
■ Ni-MH Batteries
The capacity of Ni-MH batteries may be
temporarily reduced when new, after long
periods of disuse, or if they are repeatedly
recharged before being fully discharged. This
is normal and does not indicate a malfunction. Capacity can be increased by repeatedly
discharging the batteries using the discharge
option in the camera setup menu and recharging them using a battery charger (sold
separately).
Q CAUTION: Do not use the discharge option
with alkaline batteries.
ed
• Do not mix old and new batteries, batteries
with different charge levels, or batteries of
different types.
• If the camera will not be used for an extended period, remove the batteries. Note that
the camera clock will be reset.
• The batteries may be warm to the touch
immediately after use. Turn the camera
off and allow the batteries to cool before
handling.
• Battery capacity tends to decrease at low
temperatures. Keep spare batteries in a
pocket or other warm place and exchange
as necessary. Cold batteries may recover
some of their charge when warmed.
• Fingerprints and other stains on the battery
terminals can impair battery performance.
Thoroughly clean the terminals with a
soft, dry cloth before inserting them in the
camera.
Ni-MH batteries can be recharged in a battery charger (sold separately). Batteries may
become warm to the touch after charging.
Refer to the instructions provided with the
charger for more information. Use the charger with compatible batteries only.
Ni-MH batteries gradually lose their charge
when not in use.
■ Disposal
Dispose of used batteries in accord with local
regulations.
vii
w
w
or
nb
de
an
.v
w
Color Television Systems
NTSC (National Television System Committee)
is a color television telecasting specification
adopted mainly in the U.S.A., Canada, and
Japan. PAL (Phases Alternation by Line) is
a color television system adopted mainly in
European countries and China.
e
.b
re
viii
m
Handling
To ensure that images are recorded correctly,
do not subject the camera to impact or physical shocks while images are being recorded.
Electrical Interference
This camera may interfere with hospital or
aviation equipment. Consult with hospital
or airline staff before using the camera in a
hospital or on an aircraft.
fro
Notes on Copyright
Unless intended solely for personal use, images recorded using your digital camera system
cannot be used in ways that infringe copyright laws without the consent of the owner.
Note that some restrictions apply to the
photographing of stage performances, entertainments, and exhibits, even when intended
purely for personal use. Users are also asked
to note that the transfer of memory cards
containing images or data protected under
copyright laws is only permissible within the
restrictions imposed by those copyright laws.
Liquid Crystal
In the event that the LCD monitor is damaged,
care should be taken to avoid contact with liquid crystal. Take the urgent action indicated
should any of the following situations arise:
• If liquid crystal comes in contact with your
skin, clean the area with a cloth and then
wash thoroughly with soap and running
water.
• If liquid crystal enters your eyes, flush the affected eye with clean water for at least 15
minutes and then seek medical assistance.
• If liquid crystal is swallowed, rinse your
mouth thoroughly with water. Drink large
quantities of water and induce vomiting,
then seek medical assistance.
ed
Take Test Shots
Before taking photographs on important
occasions (such as at weddings or before
taking the camera on a trip), take a test shot
and view the result in the LCD monitor to ensure that the camera is functioning normally.
FUJIFILM Corporation can not accept liability
for damages or lost profits incurred as a result
of product malfunction.
ad
Using the Camera
Do not aim the camera at extremely bright
light sources, such as the sun in a cloudless
sky. Failure to observe this precaution could
damage the camera image sensor.
o
nl
ow
D
For Your Safety
Exif Print (Exif Version 2.3)
Exif Print is a newly revised digital camera file
format in which information stored with phoAlthough the display is manufactured using tographs is used for optimal color reproducextremely high-precision technology, it may tion during printing.
contain pixels that are always lit or that do not
IMPORTANT NOTICE:
light. This is not a malfunction, and images reRead Before Using the Software
corded with the product are unaffected.
Direct or indirect export, in whole or in part,
of licensed software without the permission
Trademark Information
xD-Picture Card and E are trademarks of of the applicable governing bodies is proFUJIFILM Corporation. The typefaces included hibited.
herein are solely developed by DynaComware
Taiwan Inc. Macintosh, QuickTime, and Mac
OS are trademarks of Apple Inc. in the U.S.A.
and other countries. Windows 8, Windows 7,
Windows Vista, and the Windows logo are
trademarks of the Microsoft group of companies. Adobe and Adobe Reader are either
trademarks or registered trademarks of Adobe
Systems Incorporated in the U.S.A. and/or
other countries. The SDHC and SDXC logos
are trademarks of SD-3C, LLC. The HDMI logo
is a trademark. YouTube is a trademark of
Google Inc. Facebook is a trademark of Facebook, Inc. All other trade names mentioned in
this manual are the trademarks or registered
trademarks of their respective owners.
ad
o
nl
ow
D
About This Manual
ed
m
fro
Before using the camera, read this manual and the warnings in “For Your Safety” (P ii). For information on specific topics, consult the sources below.
w
w
de
an
.v
w
Troubleshooting ............................ P 85
Having a specific problem with the
camera? Find the answer here.
e
.b
re
or
nb
Table of Contents .............................P
.............................P xi
The “Table of Contents” gives an
overview of the entire manual. The
principal camera operations are listed here.
Warning Messages and Displays ..... P 90
Find out what’s behind that flashing
icon or error message in the display.
Memory Cards
Pictures can be stored in an optional SD, SDHC, and SDXC memory cards (P 9), referred to in this manual as “memory cards”.
ix
ad
o
nl
ow
D
Frequently-Used Buttons
ed
w
w
.b
re
or
nb
de
an
.v
w
Shoot
e
x
■ Taking Pictures During Playback
y To return instantly to shooting mode,
press the shutter button halfway.
m
■ Silent Mode
y Press and hold the DISP/
BACK button to disable
camera lights and
sounds.
fro
■ Turning the Camera on in Playback Mode
y When the camera is
off, playback can be
started by pressing the
a button for about a
second.
View
■ Deleting Pictures
y Press the selector up (b)
to display deletion options.
Shooting Mode ................................................................20
Choosing a Shooting Mode ............................................20
Shooting Mode Options .................................................21
a ADVANCED FILTER ..................................................23
r MOTION PANORAMA ..............................................24
i INDIVID. SHUTTER 3D ..............................................27
Focus Lock ........................................................................29
F Macro Mode (Close-ups) ...........................................31
N Using the Flash (Intelligent Flash) ............................32
h Using the Self-Timer .................................................34
c Instant Zoom ............................................................35
w
w
e
.b
re
or
nb
de
an
.v
w
Inserting the Battery and a Memory Card.......................6
Compatible Memory Cards ...............................................9
Charging the Battery ......................................................11
Turning the Camera on and Off ......................................13
Shooting Mode ..............................................................13
Playback Mode ...............................................................13
Basic Setup ......................................................................15
m
First Steps
More on Photography
fro
Symbols and Conventions.................................................1
Supplied Accessories .........................................................1
Parts of the Camera ..........................................................2
Camera Displays ...............................................................4
Shooting ........................................................................4
Playback.........................................................................5
ed
Before You Begin
ad
For Your Safety ..................................................................ii
IMPORTANT SAFETY INSTRUCTIONS ..................................ii
Safety Notes ..................................................................iv
About This Manual ...........................................................ix
Frequently-Used Buttons .................................................x
o
nl
ow
D
Table of Contents
More on Playback
Playback Options.............................................................38
I Favorites: Rating Pictures .........................................38
Playback Zoom ...............................................................39
Multi-Frame Playback ....................................................40
A Deleting Pictures......................................................41
Viewing Panoramas ........................................................42
Basic Photography and Playback
Taking Pictures in Q (Scene Recognition) Mode ......16
Viewing Pictures .............................................................19
xi
o
nl
ow
D
ed
Menus
Recording Movies ............................................................43
Viewing Movies ...............................................................45
Using the Menus: Shooting Mode ..................................56
Using the Shooting Menu...............................................56
Shooting Menu Options .................................................57
A SHOOTING MODE....................................................57
d EXP. COMPENSATION...............................................57
N ISO........................................................................58
O IMAGE SIZE ............................................................59
T IMAGE QUALITY .....................................................60
P FINEPIX COLOR .......................................................60
D WHITE BALANCE ....................................................61
R CONTINUOUS .........................................................61
b FACE DETECTION ....................................................62
F AF MODE ...............................................................62
P PANORAMA MODE .................................................63
F MOVIE AF MODE ....................................................63
W MOVIE MODE .........................................................63
m
w
w
e
.b
re
or
nb
de
an
.v
w
Viewing Pictures on TV ...................................................46
Printing Pictures via USB ................................................47
Printing the DPOF Print Order.........................................49
Viewing Pictures on a Computer ....................................51
Windows: Installing MyFinePix Studio ...........................51
Connecting the Camera ..................................................53
Importing pictures or movies to Mac (Macintosh) ..........55
fro
Movies
Connections
xii
ad
Table of Contents
o
nl
ow
D
ad
Table of Contents
ed
The Setup Menu ..............................................................72
Using the Setup Menu....................................................72
Setup Menu Options ......................................................73
F DATE/TIME ............................................................73
N TIME DIFFERENCE ...................................................73
L a ......................................................73
o SILENT MODE.........................................................73
R RESET....................................................................74
K FORMAT ................................................................74
A IMAGE DISP. ...........................................................74
B FRAME NO. ............................................................75
G OPERATION VOL. ....................................................75
H SHUTTER VOLUME ..................................................75
e SHUTTER SOUND ....................................................76
I PLAYBACK VOLUME ................................................76
J LCD BRIGHTNESS ....................................................76
E LCD MODE .............................................................76
M AUTO POWER OFF...................................................76
L DUAL IS MODE .......................................................76
B RED EYE REMOVAL .................................................77
m BLINK DETECTION ...................................................77
R INTELLIGENT DIGITAL ZOOM ....................................78
p MOVIE ZOOM TYPE .................................................78
C AF ILLUMINATOR ....................................................79
n SAVE ORG IMAGE....................................................79
O BACKGROUND COLOR ..............................................79
c GUIDANCE DISPLAY ................................................79
Q VIDEO SYSTEM .......................................................79
S DATE STAMP ..........................................................80
m
fro
w
w
e
.b
re
or
nb
de
an
.v
w
Using the Menus: Playback Mode ..................................64
Using the Playback Menu ...............................................64
Playback Menu Options..................................................65
k PHOTOBOOK ASSIST ................................................65
b IMAGE SEARCH ......................................................66
A ERASE ...................................................................66
i MOVIE EDIT ...........................................................67
j MARK FOR UPLOAD TO ............................................68
I SLIDE SHOW ..........................................................69
B RED EYE REMOVAL .................................................69
D PROTECT ................................................................70
G CROP.....................................................................70
O RESIZE ...................................................................71
C IMAGE ROTATE .......................................................71
K PRINT ORDER (DPOF) ..............................................71
xiii
o
nl
ow
D
ad
Table of Contents
ed
Troubleshooting
Optional Accessories .......................................................81
Printing ........................................................................81
Computer Related..........................................................81
Audio/Visual .................................................................81
Digital viewer................................................................81
3D print ........................................................................81
Accessories from FUJIFILM..............................................82
Caring for the Camera .....................................................83
Storage and Use .............................................................83
Water and Sand.............................................................83
Condensation ................................................................83
Cleaning .........................................................................84
Traveling ........................................................................84
Problems and Solutions ..................................................85
Warning Messages and Displays ....................................90
m
w
w
re
or
nb
Appendix
de
an
.v
w
Memory Card Capacity ....................................................94
Specifications ..................................................................95
e
.b
xiv
fro
Technical Notes
ad
o
nl
ow
D
ed
Before You Begin
fro
m
Symbols and Conventions
w
w
w
e
.b
re
or
nb
de
an
.v
The following symbols are used in this manual:
Q : This information should be read before use to ensure correct operation.
R : Additional information that may be helpful when using the camera.
P: Other pages in this manual on which related information may be found.
Menus and other text in the LCD monitor are shown in bold. In the illustrations in this manual, displays may be simplified for explanatory purposes.
Supplied Accessories
The following items are included with the camera:
NP-45A or NP-45B
rechargeable battery
• Strap
• User Guide/
Basic Manual
AC power adapter *
USB cable
CD-ROM (contains
this manual)
Attaching the Strap
Attach the strap as
shown.
* Shape of adapter varies with region of sale.
1
ad
o
nl
ow
D
Parts of the Camera
ed
m
fro
For more information, refer to the page listed to the right of each item.
w
w
e
.b
re
or
nb
de
an
.v
w
Selector button
Move cursor up
c (instant zoom) button (P 35)
b (delete) button (P x)
Move cursor left
F (macro) button (P 31)
MENU/OK button (P 15, 56, 64, 72)
Move cursor right
N (flash) button (P 32)
Move cursor down
h (self-timer) button (P 34)
* Illustrations in this manual may be simplified for explanatory purposes.
2
Before You Begin
o
nl
ow
D
ad
Parts of the Camera
11 a (playback) button .................................................. 19
12 Strap eyelet .................................................................... 1
13 DISP (display)/BACK button .....................................5, 15
o (silent mode) button* ................................................x
14 Battery-chamber cover ................................................... 6
15 USB multi-connector .........................................46, 47, 53
16 Tripod mount
17 Memory card slot ............................................................ 7
18 Battery chamber ............................................................. 6
19 Battery latch ................................................................6, 8
m
fro
w
w
e
.b
re
or
nb
de
an
.v
w
Before You Begin
ed
1 Flash ............................................................................. 32
2 Zoom control ...........................................................17, 39
3 Shutter button .............................................................. 18
4 ON/OFF button ............................................................. 13
5 AF-assist illuminator ..................................................... 79
Self-timer lamp ............................................................ 34
6 F (movie recording) button ....................................... 43
7 Speaker......................................................................... 45
8 Lens and lens cover
9 Microphone .................................................................. 43
10 LCD monitor .................................................................... 4
*Press and hold the DISP/BACK button until o is displayed.
3
o
nl
ow
D
ad
Parts of the Camera
ed
m
fro
Camera Displays
The following types of indicator may be displayed during shooting and playback. Indicators vary with camera settings.
w
w
or
nb
de
an
.v
w
e
.b
re
■ Shooting
P
9
DATE
800
N
12/31/2050
10 : 00 AM
-1 2 3
250
F4.5
1 Shooting mode ............................................................. 20
2 Intelligent Face Detection indicator .............................. 62
3 Continuous shooting mode ........................................... 61
4 Silent mode indicator ................................................3, 73
5 Date stamp ................................................................... 80
6 Movie mode.................................................................. 63
4
7 Number of available frames .......................................... 94
8 Sensitivity ..................................................................... 58
9 Image size/Image quality ........................................59, 60
10 Focus warning .........................................................18, 90
11 FINEPIX color ................................................................ 60
12 White balance............................................................... 61
13 Battery level ................................................................... 5
14 Dual IS mode ................................................................ 76
15 Exposure compensation ................................................ 57
16 Shutter speed/Aperture
17 Date and time ............................................................... 15
18 Blur warning............................................................33, 90
19 Focus frame .................................................................. 29
20 Self-timer indicator ...................................................... 34
21 Macro (close-up) mode................................................. 31
22 Flash mode ................................................................... 32
Before You Begin
o
nl
ow
D
ad
Parts of the Camera
ed
m
fro
■ Playback
w
w
1 Playback mode indicator..........................................19, 38
2 Intelligent Face Detection indicator .............................. 62
3 Red-eye removal indicator ............................................ 69
4 3D image ...................................................................... 27
5 Advanced filter ............................................................. 23
6 Silent mode indicator ................................................3, 73
7 Gift image..................................................................... 38
8 Frame number .............................................................. 75
9 Mark for upload to ........................................................ 68
10 Photobook assist........................................................... 65
11 Favorites ....................................................................... 38
12 DPOF print indicator ..................................................... 49
13 Protected image ........................................................... 70
12 / 31 / 2050 10 : 00 AM
-1 2 3
1 / 250
F4.5
e
YouTube
.b
400
4:3N
4:3
N
re
or
nb
de
an
.v
w
100-0001
Battery Level
Battery level is shown as follows:
Indicator
D (white)
C (white)
B (red)
A (blinks red)
Description
Battery partially discharged.
Battery more than half discharged.
Low battery. Charge as soon as possible.
Battery exhausted. Turn camera off and charge battery.
Hiding and Viewing Indicators
Press DISP/BACK to cycle through shooting and playback indicators as follows:
• Shooting: Indicators displayed/indicators hidden/best framing
• Playback: Indicators displayed/indicators hidden/I favorites
Before You Begin
5
ed
w
.b
re
or
nb
de
an
.v
w
1 Open the battery-chamber cover.
w
Insert the battery and memory card as described below.
m
fro
Inserting the Battery and a Memory Card
ad
o
nl
ow
D
First Steps
e
R Be sure the camera is off before opening the
battery-chamber cover.
Q Do not open the battery-chamber cover
when the camera is on. Failure to observe
this precaution could result in damage to
image files or memory cards.
Q Do not use excessive force when handling the battery-chamber cover.
2 Insert the battery.
Align the orange stripe on the battery with
the orange battery latch and slide the battery into the camera, keeping the battery
latch pressed to one side. When inserting
the battery, be sure that the battery is secured by the orange battery latch. If the battery is not securely latched, the camera may
not turn on or may turn off without warning.
Orange stripe
Battery latch
The camera uses an NP-45A/NP-45B rechargeable battery.
Q Insert the battery in the correct orientation. Do NOT use force or attempt to insert
the battery upside down or backwards. The battery will slide in easily in the correct orientation.
6
o
nl
ow
D
ad
Inserting the Battery and a Memory Card
m
w
w
e
.b
re
or
nb
de
an
.v
w
Q Be sure card is in the correct orientation; do not insert at an angle or use
force.
fro
Holding the memory card in the
orientation shown at right, slide it in
until it clicks into place at the back
of the slot.
ed
3 Insert the memory card.
Click
Battery
Q SD/SDHC/SDXC memory cards can be locked, making
it impossible to format the card or to record or delete
images. Before inserting an SD/SDHC/SDXC memory
card, slide the write-protect switch to the unlocked
Write-protect switch
position.
4 Close the battery-chamber cover.
First Steps
7
ad
o
nl
ow
D
Inserting the Battery and a Memory Card
ed
fro
m
Removing the Battery and Memory Card
Before removing the battery or memory card, turn the camera off and open the
battery-chamber cover.
w
w
or
nb
de
an
.v
w
Battery latch
e
.b
re
To remove the battery, press the battery latch to the side, and
slide the battery out of the camera as shown.
To remove the memory card, press it in and release it slowly.
The card can then be removed by hand. When a memory card
is removed, the card could come out of the slot too quickly. Use
your finger to hold it and gently release the card.
8
First Steps
o
nl
ow
D
ad
Inserting the Battery and a Memory Card
ed
m
fro
■ Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the camera. A complete list of approved memory cards
is available at http://www.fujifilm.com/support/digital_cameras/compatibility/.
Operation is not guaranteed with other cards. The camera can not be used
with xD-Picture Cards or MultiMediaCard (MMC) devices.
w
w
e
.b
re
or
nb
de
an
.v
w
Q Memory Cards
• Do not turn the camera off or remove the memory card while the memory card is being formatted
or data are being recorded to or deleted from the card. Failure to observe this precaution
could damage the card.
• Format SD/SDHC/SDXC memory cards before first use, and be sure to reformat all
memory cards after using them in a computer or other device. For more information
on formatting memory cards, see “K FORMAT” (P 74).
• Memory cards are small and can be swallowed; keep out of reach of children. If a
child swallows a memory card, seek medical assistance immediately.
• miniSD or microSD adapters that are larger or smaller than the standard dimensions of
an SD/SDHC/SDXC memory card may not eject normally; if the card does not eject, take
the camera to an authorized service representative. Do not forcibly remove the card.
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.
• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory
card. Use a G card or better when shooting HD.
• Formatting a memory card in the camera creates a folder in which pictures are
stored. Do not rename or delete this folder or use a computer or other device to
edit, delete, or rename image files. Always use the camera to delete pictures; before
editing or renaming files, copy them to a computer and edit or rename the copies,
not the originals.
First Steps
9
ad
o
nl
ow
D
Inserting the Battery and a Memory Card
ed
m
fro
Q Batteries
• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this
precaution could prevent the battery from charging.
• Do not affix stickers or other objects to the battery. Failure to observe this precaution
could make it impossible to remove the battery from the camera.
• Do not short the battery terminals. The battery could overheat.
• Read the cautions in “The Battery and Power Supply” (P vi).
• Use only battery chargers designated for use with the battery. Failure to observe this
precaution could result in product malfunction.
• Do not remove the labels from the battery or attempt to split or peel the outer casing.
• The battery gradually loses its charge when not in use. Charge the battery one or
two days before use.
w
w
e
.b
re
or
nb
de
an
.v
w
10
First Steps
o
nl
ow
D
ad
Charging the Battery
ed
m
fro
The battery is not charged at shipment. Charge the battery before use. The
camera charges the battery internally.
w
w
de
an
.v
w
e
.b
Turn the camera off and connect the camera to the supplied AC power adapter using the supplied USB cable. Then plug the
AC power adapter into an indoor power
outlet.
re
or
nb
1 Charge the battery.
Q Be sure the connectors are in the correct orientation and then insert them fully.
R The camera operates in external power mode if the camera is turned on while
plugged into AC power.
The Charging Indicator
The charging indicator is displayed in the center of the LCD monitor.
Charging indicator
a
Battery status
Battery charging.
s
Battery fault.
Action
—
Unplug the AC power adapter from the power
outlet and reinsert the battery in the correct
orientation (P
(P 85).
The charging indicator will disappear when charging completes.
First Steps
11
ad
o
nl
ow
D
Charging the Battery
ed
fro
m
Charging via a computer
The battery can be charged by connecting the camera to a computer.
w
w
e
.b
re
or
nb
de
an
.v
w
Turn the camera off and connect the supplied USB cable as shown, making sure the
connectors are fully inserted. Connect the
camera directly to the computer; do not
use a USB hub or keyboard.
Q If the camera is turned on, charging is not available.
Q If the computer goes into sleep mode while charging, charging will stop. To
continue charging, disable sleep mode on the computer, and disconnect and
connect the USB cable.
Q Charging may be impossible depending on computer specifications, settings
or conditions.
12
First Steps
ad
o
nl
ow
D
Turning the Camera on and Off
ed
Playback Mode
To turn the camera on and begin
playback, press the a button for
about a second.
Press ON/OFF again to turn the camera
off.
Press the a button again or press
the ON/OFF button to turn the camera
off.
R Switching to Playback Mode
Press the a button to start playback.
Press the shutter button halfway to return
to shooting mode.
R Switching to Shooting Mode
To exit to shooting mode, press the shutter button halfway. Press the a button
to return to playback.
m
fro
Shooting Mode
Press the ON/OFF button to turn the
camera on. The lens will extend and
the lens cover will open.
w
w
e
.b
re
or
nb
de
an
.v
w
First Steps
13
ad
o
nl
ow
D
Turning the Camera on and Off
ed
m
fro
Q Forcibly obstructing the lens could cause damage or product malfunction.
Q Fingerprints and other marks on the lens can affect pictures. Keep the lens clean.
Q The ON/OFF button does not completely end the supply of power to the camera.
w
w
nb
de
an
.v
w
e
.b
re
or
R Auto Power Off
The camera will turn off automatically if no operations are performed for the length of
time selected for M AUTO POWER OFF (P 76).
14
First Steps
ad
o
nl
ow
D
Basic Setup
ed
m
fro
A language-selection dialog is displayed the first time the camera is turned
on. Set up the camera as described below (you can reset the clock or change
languages at any time using the F DATE/TIME or L a options in
the setup menu; for information on displaying the setup menu, see page 72).
w
w
e
.b
re
or
nb
de
an
.v
w
1 Highlight a language and press MENU/OK.
R Press DISP/BACK to skip the current step. Any steps you skip
will be displayed the next time the camera is turned on.
START MENU
ENGLISH
FRANCAIS
DEUTSCH
SET
2 The date and time will be displayed. Press the selector
left or right to highlight the year, month, day, hour, or
minute and press up or down to change. To change the
order in which the year, month, and day are displayed,
highlight the date format and press the selector up or
down. Press MENU/OK when settings are complete.
NO
DATE/TIME NOT SET
2015
2014
YY. MM. DD
2013
2012
2011
SET
1. 1 12 : 00
AM
NO
R The Camera Clock
If the battery is removed for an extended period, the camera clock will be reset and the
language-selection dialog will be displayed when the camera is turned on.
First Steps
15
ad
o
nl
ow
D
ed
Basic Photography and Playback
fro
m
Taking Pictures in Q (Scene Recognition) Mode
w
w
w
e
.b
re
or
nb
de
an
.v
This section describes how to take pictures in Q (scene recognition) mode.
The camera automatically analyzes the composition and adjusts settings appropriately.
1 Turn the camera on.
Press the ON/OFF button to turn the camera
on. Q shooting indicators will be displayed.
The g Icon
This icon indicates that the camera continuously searches for faces to select the
appropriate scene, increasing the drain on the battery.
Scene Icon
The camera selects the scene according to shooting conditions and the type of
subject: b PORTRAIT (portraits), c LANDSCAPE (landscapes), d NIGHT (poorly-lit landscapes), e MACRO (close ups), f NIGHT PORTRAIT (poorly-lit portraits), g BACKLIT PORTRAIT
(backlit portraits), a AUTO (all other scenes)
16
o
nl
ow
D
ad
Taking Pictures in Q (Scene Recognition) Mode
ed
m
fro
2 Frame the picture.
w
w
Use the zoom control to frame the picture in the display.
e
.b
re
or
nb
de
an
.v
w
Zoom indicator
Zoom out
Zoom in
Holding the Camera
Hold the camera steady with both hands and brace your
elbows against your sides. Shaking or unsteady hands can
blur your shots.
To prevent pictures that are out of focus or too dark (underexposed), keep your fingers and other objects away from
the lens and flash.
Basic Photography and Playback
17
ed
m
fro
w
Double
beep
w
e
.b
re
or
nb
de
R The lens may make a noise when the camera focuses; this
is normal.
an
.v
w
Press the shutter button halfway to focus.
ad
3 Focus.
o
nl
ow
D
Taking Pictures in Q (Scene Recognition) Mode
If the camera is able to focus, it will beep twice.
If the camera is unable to focus, the focus frame will turn red, s will be displayed. Change the composition or use focus lock (P 29).
4 Shoot.
Smoothly press the shutter button the rest of the way
down to take the picture.
Click
R If the subject is poorly lit, the flash may fire when the picture is taken. For information on using the flash when
lighting is poor, see “N Using the Flash (Intelligent Flash)”
(P 32).
The Shutter Button
The shutter button has two positions. Pressing the shutter button halfway sets
focus and exposure; to shoot, press the shutter button the rest of the way down.
18
Basic Photography and Playback
ad
o
nl
ow
D
Viewing Pictures
ed
m
fro
Pictures can be viewed in the LCD monitor. When taking important photographs, take a test shot and check the results.
w
w
e
.b
re
or
nb
The most recent picture will be displayed.
de
an
.v
w
1 Press the a button.
2 View additional pictures.
Press the selector right to view pictures in
the order recorded, left to view pictures in
reverse order.
Press the shutter button to exit to shooting
mode.
Basic Photography and Playback
19
ed
m
fro
w
w
Shooting Mode
ad
o
nl
ow
D
More on Photography
w
or
nb
de
an
.v
Choose a shooting mode according to the scene or type of subject.
e
.b
re
Choosing a Shooting Mode
1 Press MENU/OK to display the shooting menu.
2 Highlight A SHOOTING MODE and press the
SHOOTING MENU
SHOOTING MODE
selector right to display shooting mode options.
SET
EXIT
3 Highlight the desired mode and press MENU/OK.
QSCENE RECOGNITION
Selects optimum
camera settings
for certain modes.
SET
CANCEL
4 Press DISP/BACK to exit to shooting mode.
20
o
nl
ow
D
ad
Shooting Mode
m
fro
w
Description
The camera automatically analyzes the composition and selects a scene
Q SCENE RECOGNITION
according to shooting conditions and the type of subject.
Choose for crisp, clear snapshots. This mode is recommended in most
B AUTO
situations.
Options for white balance and AF mode will be fully available and expoP PROGRAM AE
sure compensation can be adjusted manually.
The camera takes two shots: one without the flash and one with.
C NATURAL & N
Capture natural lighting under low-light conditions.
D NATURAL LIGHT
Choose for portraits.
L PORTRAIT
Choose for natural skin tones when taking portraits of infants.
D BABY MODE
The shutter is released automatically when Intelligent Face Detection
K SMILE&SHOOT
detects a smiling face.
Choose for daylight shots of buildings and landscapes.
M LANDSCAPE
Take photos with filter effects.
a ADVANCED FILTER
r MOTION PANORAMA Take up to three pictures and join them together to form a panorama.
Choose when photographing moving subjects.
N SPORT
Choose this mode for poorly lit twilight or night scenes.
O NIGHT
Choose this mode for slow shutter speeds when shooting at night.
H NIGHT (TRIPOD)
Slow shutter speeds are used to capture the expanding burst of light
P FIREWORKS
from a firework.
Choose this mode to record the vivid colors in sunrises and sunsets.
Q SUNSET
w
e
.b
re
or
nb
de
an
.v
w
Scene
ed
Shooting Mode Options
More on Photography
21
ad
ed
Description
Choose for crisp, clear shots that capture the brightness of scenes domiR SNOW
nated by shining white snow.
Choose for crisp, clear shots that capture the brightness of sunlit beaches.
S BEACH
Capture indoor background lighting under low-light conditions.
U PARTY
Choose for vivid close-ups of flowers.
V FLOWER
Take clear pictures of text or drawings in print.
W TEXT
i INDIVID. SHUTTER 3D Take two shots from different angles to create a 3D image.
m
fro
Scene
o
nl
ow
D
Shooting Mode
w
w
e
.b
re
or
nb
de
an
.v
w
22
More on Photography
o
nl
ow
D
ad
Shooting Mode
ed
m
fro
w
w
an
.v
w
■ a ADVANCED FILTER
Take photos with filter effects.
Filter
G TOY CAMERA
H MINIATURE
I POP COLOR
S SOFT FOCUS *1
C CROSS SCREEN *1
u PARTIAL COLOR (RED)
v PARTIAL COLOR (ORANGE)
w PARTIAL COLOR (YELLOW)
x PARTIAL COLOR (GREEN)
y PARTIAL COLOR (BLUE)
z PARTIAL COLOR (PURPLE)
e
2 Select a filter effect and press MENU/OK.
.b
re
or
nb
de
1 Select a ADVANCED FILTER for shooting mode (P 20).
Description
Choose for a retro toy camera effect.
The tops and bottoms of pictures are blurred for a diorama effect.
Create high-contrast images with saturated colors.
Create a look that is evenly soft throughout the whole image.
Create a star pattern where lines radiate out from bright objects.
Areas of the image that are the selected color are recorded in that
color. All others areas of the image are recorded in black-and-white.
*1 To check the effect, play the picture after shooting.
R Depending on the subject and camera settings, images may in some cases be
grainy or vary in brightness and hue.
More on Photography
23
o
nl
ow
D
ad
Shooting Mode
ed
m
fro
■ r MOTION PANORAMA
In this mode, you can take up to three pictures and join them together to form
a panorama. Use of a tripod is recommended to assist in composing overlapping shots. The camera zooms all the way out and zoom remains fixed at the
widest angle until shooting is complete.
w
w
e
.b
re
or
nb
de
an
.v
w
R Operations are described in the factory settings (C AUTO).
1 Select r MOTION PANORAMA for shooting mode (P 20).
2 Press the selector up to select a frame. Press the selector left or right to
highlight a pan direction and press MENU/OK.
3 Take a photograph. Exposure and white balance for the panorama are set
with the first shot.
4 Frame the next shot to overlap with the previous picture by superimposing y on + so that they form a solid circle (z). The camera will release the
shutter automatically.
Pan direction
1
END
2 3
CANCEL
Display after 1st shot
24
1
END
2 3
CANCEL
Shutter released
More on Photography
o
nl
ow
D
ad
Shooting Mode
ed
m
fro
5 Take the last shot as described in Step 4.
w
w
e
.b
6 Press MENU/OK to save the picture.
re
or
nb
de
an
.v
w
R To end shooting and create a panorama after the first or second shot, press the
multi selector up after completing Step 3 or Step 4 and proceed to Step 6.
R Saving a panorama may take a while.
Q Panoramas are created from multiple frames. The camera may in some cases be
unable to stitch the frames together perfectly.
Q The desired results may not be achieved with moving subjects, subjects close to
the camera, unvarying subjects such as the sky or a field of grass, subjects that are
in constant motion, such as waves and waterfalls, or subjects that undergo marked
changes in brightness. Panoramas may be blurred if the subject is poorly lit.
For Best Results
For best results, be careful not to tilt the camera backward or forward or to either
side and try not to move the camera while y and + are aligned to form a solid circle.
Printing Panoramas
Depending on the page size and the size of the panorama, panoramas may print
with their edges cropped out or with wide margins at the top and bottom or at
both sides.
More on Photography
25
o
nl
ow
D
ad
Shooting Mode
ed
fro
m
Framing Panoramas Manually
Follow the steps below if the desired results are not achieved with C AUTO selected for P PANORAMA MODE:
w
w
nb
de
an
.v
w
e
.b
re
or
1 Select D MANUAL for P PANORAMA MODE in the shooting menu.
2 Select a frame and take the first shot.
3 Press MENU/OK to display a guide showing an edge of the picture you have just taken. Take
the next shot, framing it to overlap with the previous picture.
Guide
Display after 1st shot
Frame next shot
4 Repeat Step 3 to take the third shot and then press MENU/OK to display the completed panorama.
5 Press MENU/OK to save the picture.
26
More on Photography
o
nl
ow
D
ad
Shooting Mode
ed
m
fro
■ i INDIVID. SHUTTER 3D
Take two shots from different angles to create a 3D image.
w
w
an
.v
w
e
TURN
.b
re
or
nb
de
1 Select i INDIVID. SHUTTER 3D for shooting mode (P 20).
2 To choose the order in which the pictures are taken,
press the selector right to display the current order and
then press the selector left or right to choose from the
options below.
G: Take the left shot first.
H: Take the right shot first.
3 Press the shutter button to take the first shot.
R To exit without recording a picture, press DISP/BACK.
4 The first shot will be shown superimposed on the view through the lens.
Using it as a guide, frame the second shot and press the shutter release
button.
R The 3D effect may not be visible with some subjects or under some shooting conditions. For
best results, the distance the camera is moved
between shots should be about 1/30th to 1/50th of
the distance to the subject.
R The camera will turn off automatically if no operations performed for the time
selected for AUTO POWER OFF (P 76). The first shot will not be saved if the second shot is not taken before the camera turns off.
More on Photography
27
ad
o
nl
ow
D
Shooting Mode
ed
fro
m
Viewing and Printing 3D Images
• The camera displays images in 2D. Press the selector down to toggle between the
first and second shots.
• Devices equipped for 3D display, such as the FINEPIX REAL 3D V3 digital photo frame
or FINEPIX REAL 3D W3 digital camera, will display the images in 3D. Note that the
FINEPIX REAL 3D W3 only displays images of size P or smaller.
• 3D prints can be ordered from http://www.fujifilm.com/3d/print/
• The supplied software displays 3D anaglyph images. 3D photos can also be viewed
using other applications that support the MP format.
• 3D TVs that support the MP format can display images in 3D. See the manual for
your TV for details.
w
w
e
.b
re
or
nb
de
an
.v
w
Q Images are not output in 3D when printed directly from the camera.
Q 3D images are displayed in 2D in slide shows and when output on a conventional
TV.
Q 3D images can not be edited or retouched.
Note: The MP ((M
Note:
Multiulti-PPicture) format is a CIPA standard for files containing multiple still images. Files
in MP format are referred to as “MP files” and have the extension “*.MPO”. The camera uses this
format for 3D images.
28
More on Photography
ad
o
nl
ow
D
Focus Lock
ed
m
fro
To compose photographs with off-center subjects:
e
.b
re
or
nb
de
an
.v
w
and press the shutter button halfway to lock focus
and exposure. Focus and exposure will remain locked
while the shutter button is pressed halfway (AF/AE
lock).
w
w
1 Focus: Position the subject in the focus frame (U)
2 Recompose: Keep the button pressed halfway.
3 Shoot: Press the button all the way down.
More on Photography
29
ad
o
nl
ow
D
Focus Lock
ed
fro
m
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to
focus on the subjects listed below. If the camera is unable to focus, focus on another
subject at the same distance and use focus lock to recompose the photograph.
• Very shiny subjects such as mirrors or car bodies.
• Subjects that show little contrast with the background
• Fast-moving subjects.
(for example, subjects in clothing that is the same color
• Subjects photographed through a window or other re- as the background).
flective object.
• Subjects positioned in front of or behind a high-contrast
• Dark subjects and subjects that absorb rather than reflect object that is also in the focus frame (for example, a
light, such as hair or fur.
subject photographed against a backdrop of highly con• Insubstantial subjects, such as smoke or flame.
trasting elements).
w
w
e
.b
re
or
nb
de
an
.v
w
30
More on Photography
ad
o
nl
ow
D
F Macro Mode (Close-ups)
ed
m
fro
w
w
e
.b
re
or
nb
de
an
.v
w
For close-ups, press the selector left (F) and select
F. When macro mode is in effect, the camera focuses on subjects near the center of the frame. Use
the zoom control to compose pictures (P 17).
To exit macro mode, press the selector left (F) and select
H.
OFF
OFF
R Use of a tripod is recommended to prevent blur caused by camera shake.
More on Photography
31
ad
o
nl
ow
D
N Using the Flash (Intelligent Flash)
ed
m
fro
When the flash is used, the camera’s Intelligent Flash system instantly analyzes
the scene based on such factors as the brightness of the subject, its position
in the frame, and its distance from the camera. Flash output and sensitivity
are adjusted to ensure that the main subject is correctly exposed while preserving the effects of ambient background lighting, even in dimly-lit indoor
scenes. Use the flash when lighting is poor, for example when shooting at
night or indoors under low light.
w
w
e
.b
re
or
nb
de
an
.v
w
Press the selector right (N) and choose from the following flash modes:
P
AUTO FLASH
According to
shooting conditions
Option
AUTO/K
AUTO/
(AUTO FLASH)
FLASH)
N/L
(FORCED FLASH)
FLASH)
Description
The flash fires when required. Recommended in most situations.
The flash fires whenever a picture is taken. Use for backlit subjects or for natural
coloration when shooting in bright light.
P
The flash does not fire even when the subject is poorly lit. Use of a tripod is
(SUPPRESSED FLASH
FLASH)) recommended.
O/M
Capture both the main subject and the background under low light (note that
(SLOW SYNCHRO)
SYNCHRO) brightly lit scenes may be overexposed).
32
More on Photography
o
nl
ow
D
ad
N Using the Flash (Intelligent Flash)
ed
m
fro
R If the flash will fire, p will be displayed when the shutter button is pressed halfway.
At slow shutter speeds, k will appear in the display to warn that pictures may be
blurred; use of a tripod is recommended.
R The flash may fire several times with each shot. Do not move the camera until
shooting is complete.
R The flash may cause vignetting.
w
w
e
.b
re
or
nb
de
an
.v
w
K RED EYE REDUCTION / L FORCED FLASH / M RED EYE & SLOW
J icon indicates that Intelligent Face Detection and red-eye removal
are on and will be used to minimize “red-eye” caused by the flash reflecting from the retinas of portrait subjects.
More on Photography
33
o
nl
ow
D
ad
h Using the Self-Timer
ed
m
fro
w
w
e
.b
re
or
nb
de
an
.v
w
To use the self-timer, press the selector down (h)
and choose from the following options:
OFF
OFF
Option
T (OFF)
S (10 SEC)
R (2 SEC)
34
Description
Self-timer off.
The shutter is released ten seconds after the shutter button is pressed. Use for
self-portraits. The self-timer lamp on the front of the camera blinks while the
timer counts down.
The shutter is released two seconds after the shutter button is pressed. Use to
reduce blur caused by the camera moving when the shutter-release button is
pressed. The self-timer lamp will blink as the timer counts down.
More on Photography
o
nl
ow
D
ad
c Instant Zoom
ed
m
fro
In instant zoom, the area surrounding the frame is visible in the display. Use
to frame erratically moving subjects such as children, pets, and athletes at
sporting events.
w
w
or
nb
de
an
.v
w
e
.b
re
1 Position the subject in the focus frame.
Use the zoom control to frame the subject in the center of the display.
2 Choose a frame.
Press the selector up (c) to cycle through framing
options as shown below.
Horizontal,
low zoom
Horizontal,
high zoom
Vertical,
high zoom
Vertical,
low zoom
No zoom
More on Photography
35
ad
o
nl
ow
D
c Instant Zoom
ed
m
fro
The frame is displayed as shown at right. The composition can be adjusted using the zoom control.
w
w
e
.b
re
or
nb
de
an
.v
w
3 Focus and shoot.
The framed area will be enlarged to create a full-sized
picture.
R Intelligent Face Detection will not detect faces outside the selected frame.
■ Intelligent digital zoom
1 Enable intelligent digital zoom.
Select ON for the R INTELLIGENT DIGITAL ZOOM option in the setup
menu (P 78).
2 Choose a subject.
Frame the subject in the center of the display using
intelligent digital zoom.
36
More on Photography
o
nl
ow
D
ad
c Instant Zoom
ed
m
fro
3 Press the selector up (c).
w
w
The camera will zoom to the maximum optical zoom position with the
area that will be recorded using intelligent digital zoom indicated by a
frame at the center of the display.
e
.b
re
or
nb
de
an
.v
w
4 Frame the picture.
Use the zoom control to choose the area that will be included in the final
photograph.
5 Focus and shoot.
The framed area will be enlarged to create a full-sized
picture.
Q Pictures taken using the instant zoom are lower quality than pictures taken using
normal zoom.
More on Photography
37
ad
ed
m
fro
w
w
Playback Options
o
nl
ow
D
More on Playback
w
e
.b
re
100-0001
or
nb
de
an
.v
To view the most recent picture in the LCD monitor, press the a button.
Press the selector right to view pictures in the order recorded, left to view
pictures in reverse order. Keep the selector pressed to scroll rapidly to the
desired frame.
R Pictures taken using other cameras are indicated by a m (“gift image”) icon during
playback.
I Favorites: Rating Pictures
To rate the picture currently displayed in full-frame playback, press DISP/BACK
and press the selector up and down to select from zero to five stars.
38
o
nl
ow
D
ad
Playback Options
ed
m
fro
Playback Zoom
Select i to zoom in on pictures displayed in single-frame playback; select
j to zoom out. When the picture is zoomed in, the selector can be used to
view areas of the image not currently visible in the display.
w
w
e
.b
re
or
nb
de
an
.v
w
Zoom indicator
Navigation window shows
portion of image currently
displayed in LCD monitor
Press DISP/BACK to exit zoom.
R The maximum zoom ratio varies with image size. Playback zoom is not available
with cropped or resized copies saved at a size of a or smaller.
More on Playback
39
o
nl
ow
D
ad
Playback Options
ed
m
fro
Multi-Frame Playback
Selecting j when a picture is shown full-frame in the LCD monitor displays
the current image with previous and following images in the background.
Select j to increase the number of images displayed to two, nine, or one
hundred, i to view fewer images.
w
w
e
.b
re
or
nb
de
an
.v
w
100-0001
When two or more images are displayed, use the selector to highlight images
and press MENU/OK to view the highlighted image full frame. In the nine- and
hundred-frame displays, use the selector to view more pictures.
40
More on Playback
ad
o
nl
ow
D
A Deleting Pictures
ed
fro
To delete individual pictures, multiple selected
pictures, or all pictures, press the selector up (b),
and choose from the options below. Note that deleted pictures can not be recovered. Copy important pictures to a computer or other storage device before proceeding.
ERASE
m
w
w
FRAME
SELECTED FRAMES
ALL FRAMES
BACK
e
.b
re
or
nb
de
an
.v
w
SET
Option
FRAME
SELECTED FRAMES
ALL FRAMES
Description
Press the selector left or right to scroll through pictures and press MENU/OK
to delete the current picture (a confirmation dialog is not displayed).
Highlight pictures and press MENU/OK to select or deselect (pictures that
are protected or in a print order are shown by S). When the operation is
complete, press DISP/BACK to display a confirmation dialog, then highlight
OK and press MENU/OK to delete the selected pictures.
A confirmation dialog will be displayed; highlight OK and press MENU/OK to
delete all unprotected pictures. Pressing DISP/BACK cancels deletion; note
that any pictures deleted before the button was pressed can not be recovered.
R Protected pictures can not be deleted. Remove protection from any pictures you
wish to delete (P 70).
R Pictures can also be deleted by A ERASE from playback menu.
R If a message appears stating that the selected images are part of a DPOF print order,
press MENU/OK to delete the pictures.
More on Playback
41
o
nl
ow
D
ad
Viewing Panoramas
ed
m
fro
If you press the selector down when a panorama is displayed full frame, the
camera will play back the picture from left to right. To pause playback, press
the selector down; press the selector down again to resume. To delete the
panorama, press the selector up (b) when playback is paused. To exit to fullframe playback, press the selector up while panorama playback is in progress.
w
w
e
.b
re
or
nb
de
an
.v
w
PLAY
STOP
PAUSE
R The playback direction can be controlled by pressing the selector left or right.
42
More on Playback
o
nl
ow
D
ad
Movies
ed
fro
m
Recording Movies
w
w
e
.b
re
or
nb
de
an
12s
.v
REC
w
Press F to shoot a movie. During recording,
y REC and the time remaining will be displayed
in the LCD monitor and sound will be recorded via
the built-in microphone (be careful not to cover the
microphone during recording).
Time available is displayed
in monitor
To end recording, press the F button again. Recording ends automatically
when the movie reaches maximum length or memory is full.
Automatic Scene Selection
In Q mode, the camera selects the scene according to shooting conditions and the type of subject: d (portraits), d (poorly-lit landscapes), f (poorly-lit portraits), c (landscapes),
e (close-ups), g (backlit portraits), or a (other subjects).
REC
23m45s
Scene icon
43
ad
o
nl
ow
D
Recording Movies
ed
fro
m
Zoom adjustment
Zoom can be adjusted while recording is in progress. Select the type of zoom available for p MOVIE ZOOM TYPE in the setup menu.
w
w
.b
re
or
nb
de
an
.v
w
e
R Focus, exposure, and white balance are adjusted automatically throughout recording. The color and brightness of the image may vary from that displayed before
recording begins.
R Sounds made by the camera may be recorded.
Q Do not open the battery-chamber cover during shooting or saving a movie on a
memory card. Failure to observe this precaution could prevent the movie from
being played back.
Q Vertical or horizontal streaks may appear in movies containing very bright subjects.
This is normal and does not indicate a malfunction.
Q The temperature of the camera may rise if it is used to record movies for an extended period or if the ambient temperature is high. This is normal and does not
indicate a malfunction.
44
Movies
ad
o
nl
ow
D
Viewing Movies
ed
fro
During playback, movies are displayed in the LCD monitor
as shown at right. The following operations can be performed while a movie is displayed:
100-006
m
w
w
PLAY
e
.b
re
Description
Press the selector down to start playback. Press again to
pause.
Press the selector up to end playback. If playback is not in
progress, pressing the selector up will delete the movie.
Press the selector right to advance, left to rewind. If playback
Advance/
is paused, the movie will advance or rewind one frame
rewind
each time the selector is pressed.
Press MENU/OK to pause playback and display volume controls. Press the selector up or down to adjust the volume
Adjust volume
and press MENU/OK to exit. Volume can also be adjusted
from the setup menu.
or
nb
de
an
.v
w
Option
Start/pause
playback
End playback/
delete
Q Do not cover the speaker during playback.
Movies
45
o
nl
ow
D
ad
Connections
ed
m
fro
w
w
Viewing Pictures on TV
or
nb
de
an
.v
w
Connect the camera to a TV to show pictures to a group.
e
.b
re
1 Turn the camera off and connect an optional A/V cable as shown below.
Connect yellow plug
to video-in jack
Insert into
USB multi-connector
Connect white
plug to audio-in jack
Q When connecting cables, be sure the connectors are fully inserted.
R Image quality may drop during movie playback.
R To view high definition movies on a high definition TV, the optional accessory
is required (P 81, 82).
2 Tune the television to the video input channel. See the documentation
supplied with the television for details.
3 Press the a button for about a second to turn the camera on. The camera
monitor turns off and pictures and movies are played back on the TV. Note
that the camera volume controls have no effect on sounds played on the
TV; use the television volume controls to adjust the volume.
46
ad
o
nl
ow
D
Printing Pictures via USB
ed
m
fro
If the printer supports PictBridge, the camera can be connected
directly to the printer as shown below and pictures can be printed
without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.
1 Connect the supplied USB cable as shown and turn the printer on.
w
w
e
.b
re
or
nb
de
an
.v
w
2 Turn the camera on.
3 Press the selector left or right to display a picture you wish to print.
4 Press the selector up or down to choose the number of copies (up to 99).
5 Repeat steps 3–4 to select additional pictures. Press MENU/OK to display a
confirmation dialog when settings are complete.
Connections
47
ad
o
nl
ow
D
Printing Pictures via USB
ed
m
fro
6 Press MENU/OK to start printing. Printing can be interrupted by pressing
w
w
DISP/BACK, but note that some printers may not respond immediately. If the
printer stops before printing is complete, turn the camera off and then on
again.
e
.b
re
or
nb
de
an
.v
w
7 After confirming that PRINTING has cleared from the camera display, turn
the camera off and disconnect the USB cable.
R Pictures can be printed from a memory card that has been formatted in the camera.
R If no pictures are selected, the camera will print one copy of the current picture.
R Page size, print quality, and border selections are made using the printer.
Printing the Date of Recording
To print the date of recording on pictures, press DISP/BACK in the PictBridge display
and select PRINT WITH DATE s in the PictBridge menu (to print pictures without
the date of recording, select PRINT WITHOUT DATE).
48
Connections
o
nl
ow
D
ad
Printing Pictures via USB
ed
m
fro
Printing the DPOF Print Order
The K PRINT ORDER (DPOF) option in the playback menu can be used to
create a digital “print order” for PictBridge-compatible printers (P 81) or devices that support DPOF.
w
w
e
.b
re
or
nb
de
an
.v
w
DPOF
DPOF (Digital Print Order Format) is a standard that allows pictures to be
printed from “print orders” stored on a memory card. The information in
the order includes the pictures to be printed and the number of copies of
each picture.
1 Select playback mode and press MENU/OK to
display the playback menu.
2 Highlight K PRINT ORDER (DPOF) and press MENU/OK.
3 Highlight one of the following options and press MENU/OK:
• WITH DATE s: Print the date of recording on pictures.
• WITHOUT DATE: Do not print the date of recording on pictures.
R Some printers do not support date printing. See the printer manual for details.
Connections
49
ad
o
nl
ow
D
Printing Pictures via USB
ed
m
fro
4 Press the selector left or right to display a picture you wish to add to or
w
w
an
.v
w
remove from the print order.
or
nb
de
5 Press the selector up or down to choose the number of copies (up to 99).
e
.b
re
To remove a picture from the print order, press the selector down until the
number of copies is zero.
6 Repeat Steps 4–5 to complete the print order and press MENU/OK when
settings are complete.
7 A confirmation dialog will be displayed. Press MENU/OK to save the print
order.
R Print orders can contain a maximum of 999 pictures.
R If a memory card is inserted containing a print order created by another camera,
a message will be displayed. Create a new print order as described above.
50
Connections
ad
o
nl
ow
D
Viewing Pictures on a Computer
ed
m
fro
The supplied software can be used to copy pictures to a computer, where
they can be stored, viewed, organized, and printed. Before proceeding, install
the software as described below. Do NOT connect the camera to the computer
until installation is complete.
w
w
.b
re
or
nb
de
an
.v
w
e
Windows: Installing MyFinePix Studio
1 Confirm that the computer meets the following system requirements:
Windows 8/Windows 7 (SP 1)/
Windows Vista (SP 2)1
3 GHz Pentium 4 or better
(2.4 GHz Core 2 Duo or better) 2
Windows XP (SP 3)1
2 GHz Pentium 4 or better
(2.4 GHz Core 2 Duo or better) 2
512 MB or more
RAM
1 GB or more
(1 GB or more) 2
Free disk space
2 GB or more
Supports DirectX 9 or later
Supports DirectX 7 or later
GPU
(recommended
recommended))
(required; performance not guaranteed with other GPUs)
GPUs)
Video
• 1024 × 768 pixels or more with 24-bit color or better
• Built-in USB port recommended. Operation is not guaranteed with other
USB ports.
• Internet connection (broadband recommended) required to install
Other
.NET Framework (if necessary), to use auto update feature, and when performing such tasks as sharing pictures on-line or via e-mail.
• Installation of .Net Framework 3.5 SP1 required to use upload picture feature
and MapViewer.
1 Other versions of Windows are not supported. Only pre-installed operating systems are
supported; operation is not guaranteed on home-built computers or computers that have
been upgraded from earlier versions of Windows.
2 Recommended when displaying HD movies.
CPU
Connections
51
ad
o
nl
ow
D
Viewing Pictures on a Computer
ed
w
w
an
.v
w
before proceeding.
m
fro
2 Start the computer. Log in to an account with administrator privileges
e
.b
re
CD-ROM drive.
or
nb
de
3 Exit any applications that may be running and insert the installer CD in a
Windows 8/Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control”
dialog will then be displayed; click Yes (Windows 8/Windows 7) or Allow
(Windows Vista).
The installer will start automatically; click Install MyFinePix Studio and
follow the on-screen instructions to install MyFinePix Studio.
If the Installer Does Not Start Automatically (Windows 7/Windows Vista/Windows XP)
If the installer does not start automatically, select Computer or My Computer
from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX
CD window and double-click setup or SETUP.EXE.
If the Installer Does Not Start Automatically (Windows 8)
1 Select Desktop on the Start screen.
2 Select File Explorer on the taskbar.
3 Select Computer in the navigation pane.
4 Double-click the drive icon inserting the FINEPIX CD and follow the on-screen
instructions to install.
52
Connections
o
nl
ow
D
ad
Viewing Pictures on a Computer
ed
m
fro
4 If prompted to install Windows Media Player or DirectX, follow the onw
w
an
.v
w
screen instructions to complete installation.
or
nb
de
5 Remove the installer CD from the CD-ROM drive when installation is come
.b
re
plete. Store the installer CD in a dry location out of direct sunlight in case
you need to re-install the software.
Installation is now complete. Proceed to “Connecting the Camera” (P 53).
Connecting the Camera
1 If the pictures you wish to copy are stored on a memory card, insert the
card into the camera.
R Windows users may require the Windows CD when starting the software for
the first time.
Q Loss of power during transfer could result in loss of data or damage to the memory card. Charge the battery before connecting the camera.
Connections
53
ed
m
fro
w
w
e
.b
re
or
nb
de
an
.v
w
supplied USB cable as shown, making sure the connectors are fully inserted. Connect the camera directly
to the computer; do not use a USB
hub or keyboard.
ad
2 Turn the camera off and connect the
o
nl
ow
D
Viewing Pictures on a Computer
3 Press the a button for about a second to turn the camera on. After starting MyFinePix Studio, follow the on-screen instructions to copy pictures to
the computer. To exit without copying pictures, click Cancel.
54
Connections
o
nl
ow
D
ad
Viewing Pictures on a Computer
ed
m
fro
For more information on using the supplied software, start the application
and select the appropriate option from the Help menu.
w
w
an
.v
w
e
.b
re
or
nb
de
Q If a memory card containing a large number of images is inserted, there may be a
delay before the software starts and you may be unable to import or save images.
Use a memory card reader to transfer pictures.
Q Make sure that the computer does not display a message stating that copying is in
progress before turning the camera off or disconnecting the USB cable. Failure to
observe this precaution could result in loss of data or damage to the memory card.
Q Disconnect the camera before inserting or removing memory cards.
Q In some cases, it may not be possible to access pictures saved to a network server
using the supplied software in the same way as on a standalone computer.
Q The user bears all applicable fees charged by the phone company or Internet service provider when using services that require an Internet connection.
Uninstalling the Supplied Software
Only uninstall the supplied software when it is no longer required or before beginning reinstallation. After quitting the software and disconnecting the camera,
open the control panel and use “Programs and Features” (Windows 8/Windows 7/
Windows Vista) or “Add or Remove Programs” (Windows XP) to uninstall MyFinePix
Studio. Under Windows, one or more confirmation dialogs may be displayed; read
the contents carefully before clicking OK.
Importing pictures or movies to Mac (Macintosh)
Use a standard application in Mac OS such as Image Capture to import pictures or movies to Mac.
Connections
55
ed
m
fro
w
w
Using the Menus: Shooting Mode
ad
o
nl
ow
D
Menus
e
.b
re
or
nb
de
56
an
.v
w
Using the Shooting Menu
To display the shooting menu, press MENU/OK in
shooting mode. Highlight items and press the selector right to view options, then highlight an option
and press MENU/OK. Press DISP/BACK to exit when settings are complete. The options available vary with
the shooting mode selected.
o
nl
ow
D
ad
Using the Menus: Shooting Mode
ed
m
w
(defaults to Q)
w
nb
de
an
.v
w
A SHOOTING MODE
Choose a shooting mode according to the type of subject (P 20).
fro
Shooting Menu Options
e
.b
re
or
(defaults to ±0)
d EXP. COMPENSATION
Adjust exposure compensation when photo-graphing very bright, very dark, or high-contrast
subjects.
Option: +2EV – -2EV
Choose positive (+) values
to increase exposure
Choose negative (–) values
to reduce exposure
R A d icon and exposure indicator are displayed at settings other than ±0. Exposure compensation is not reset when the camera is turned off ; to restore normal exposure control, choose
a value of ±0.
R Turn the flash off when using exposure compensation.
R Exposure compensation is available only when P (PROGRAM AE) is selected for shooting
mode.
Menus
57
o
nl
ow
D
ad
Using the Menus: Shooting Mode
ed
m
fro
(defaults to AUTO)
N ISO
N ISO
Control the camera’s sensitivity to light. Higher values can reduce blur; note, however, that mottling may appear in pictures taken at high sensitivities.
w
w
3200
Dark
More noticeable
e
.b
re
or
ISO
Scene
Noise (mottling)
nb
de
an
.v
w
100
Bright
Less noticeable
Option
Description
AUTO
Sensitivity is adjusted automatically in response to shooting conditions.
3200 / 1600 / 800 / 400 /
Sensitivity is set to the specified value, which is shown in the display.
200 / 100
58
Menus
o
nl
ow
D
ad
Using the Menus: Shooting Mode
ed
(defaults to O 4:3)
m
fro
O IMAGE SIZE
O IMAGE
Choose the image size and aspect ratio at which pictures are recorded. Large pictures can be printed at large sizes with no drop in quality,
while small pictures require less memory, allowing more pictures to be
recorded.
w
w
O4:3
de
an
.v
w
Aspect ratio
e
.b
re
or
nb
Size
Size Versus Aspect Ratio
Size
Option
O
P
Q
4 : 3: Pictures have the same
proportions as the camera
display.
3
Aspect ratio
3 : 2: Pictures have the same
proportions as a frame of
35 mm film.
2
4
Menus
Prints at sizes up to
34 × 25 cm (13.5 × 10 in.)
24 × 18 cm (9.5 × 7 in.)
17 × 13 cm (7 × 5 in.)
16 : 9: Suited for display on
High Definition (HD) devices.
9
3
16
59
ad
ed
(defaults to N)
m
fro
w
w
Description
Low compression. Select for higher image quality.
High compression. Select this option to store more pictures.
e
b B&W
.b
a CHROME
re
Option
c STANDARD
or
P FINEPIX COLOR
Enhance contrast and color saturation or take pictures in black and white.
nb
de
Option
FINE
NORMAL
an
.v
w
T IMAGE QUALITY
Choose how much image files are compressed.
o
nl
ow
D
Using the Menus: Shooting Mode
(defaults to c)
Description
Standard contrast and saturation. Recommended in most situations.
Vivid contrast and color. Choose for vivid shots of flowers or enhanced greens
and blues in landscapes.
Take pictures in black and white.
R Settings other than c STANDARD are shown by an icon in the LCD monitor.
R Depending on the subject, the effects of a CHROME may not be visible in the LCD monitor.
60
Menus
o
nl
ow
D
ad
Using the Menus: Shooting Mode
ed
(defaults to AUTO)
m
fro
w
w
e
.b
re
or
nb
Description
White balance adjusted automatically.
For subjects in direct sunlight.
For subjects in the shade.
Use under “daylight” fluorescent lights.
Use under “warm white” fluorescent lights.
Use under “cool white” fluorescent lights.
Use under incandescent lighting.
de
Option
AUTO
i
j
k
l
m
n
an
.v
w
D WHITE BALANCE
For natural colors, choose a setting that matches the light source.
R Results vary with shooting conditions. Play pictures back after shooting to check colors in
the LCD monitor.
R CONTINUOUS
Capture motion in a series of pictures.
Option
ON
OFF
(defaults to OFF)
Description
The camera takes up to 3 pictures while the shutter button is pressed.
One photograph is taken each time the shutter button is pressed.
R Focus and exposure are determined by the first frame in each series.
R The flash turns off automatically. The previously selected flash mode is restored when OFF is
selected for R CONTINUOUS
CONTINUOUS..
R Frame rate varies with shutter speed.
R The number of pictures that can be recorded depends on the memory available.
Menus
61
ad
o
nl
ow
D
Using the Menus: Shooting Mode
ed
m
fro
b FACE DETECTION
Intelligent Face Detection sets focus and exposure for human faces anywhere in the frame, preventing the camera from focusing on the background in group portraits. Choose for shots that
emphasize portrait subjects.
Option: ON/OFF
w
w
e
.b
re
or
nb
de
an
.v
w
Faces can be detected with the camera in vertical or horizontal orientation; if a face is detected, it will be indicated by a green border. If there is
more than one face in the frame, the camera will select the face closest
to the center; other faces are indicated by white borders.
Q In some modes, the camera may set exposure for the frame as a whole rather than the portrait
subject.
Q If the subject moves as the shutter button is pressed, their face may not be in the area indicated by the green border when the picture is taken.
F AF MODE
This option controls how the camera selects the focus area. Regardless of the option selected,
the camera will focus on the subject in the center of the LCD monitor when macro mode is on.
Option
r CENTER
Description
The camera focuses on the subject in the center of the frame.
Position the subject in the center focus area and press the selector left. Focus will
x TRACKING
track the subject as it moves through the frame.
R Note that in x mode, the camera focuses continuously, increasing the drain on the batteries,
and that the sound of the camera focusing may be audible.
62
Menus
o
nl
ow
D
ad
Using the Menus: Shooting Mode
ed
m
w
w
(defaults to u)
e
.b
re
or
u CONTINUOUS
nb
de
an
.v
w
F MOVIE AF MODE
F MOVIE
This option controls how the camera selects the focus area for movies.
Option
r CENTER
(defaults to C)
fro
P PANORAMA MODE
Choose how panoramas are framed (P 24).
Option: C AUTO/D MANUAL
Description
The camera focuses on the subject in the center of the frame.
The camera continuously adjusts focus to reflect changes in the distance to
subjects near the center of the frame.
R Note that in u mode, the camera focuses continuously, increasing the drain on the battery,
and that the sound of the camera focusing may be audible.
W MOVIE MODE
Choose a frame size for movies.
Option
(defaults to h)
Description
h 1280 (1280 × 720) High Definition.
f (640 × 480)
Standard definition.
g (320 × 240)
Longer movie.
Menus
63
ad
o
nl
ow
D
Using the Menus: Playback Mode
ed
m
w
w
e
.b
re
or
nb
de
an
.v
w
64
fro
Using the Playback Menu
To display the playback menu, press MENU/OK in playback mode. Highlight items and press the selector
right to view options, then highlight an option and
press MENU/OK. Press DISP/BACK to exit when settings
are complete.
Menus
o
nl
ow
D
ad
Using the Menus: Playback Mode
m
w
w
e
.b
re
or
nb
de
an
.v
w
■ Creating a PhotoBook
1 Select NEW BOOK and press MENU/OK.
fro
k PHOTOBOOK ASSIST
Create books from your favorite photos.
ed
Playback Menu Options
2 Choose from the following options:
• SELECT FROM ALL: Choose from all available pictures.
• SELECT BY IMAGE SEARCH: Choose from pictures matching selected search conditions (P 66).
R Neither photographs a or smaller nor movies can be selected for photobooks.
3 Scroll through the images and press the selector up to select or deselect. To display the
current image on the cover, press the selector down. Press MENU/OK to exit when the book is
complete.
R The first picture selected becomes the cover image. Press the selector down to select a
different image for the cover.
4 Select COMPLETE PHOTOBOOK (to select all photos or all photos matching the specified
search conditions for the book, choose SELECT ALL). The new book will be added to the list
in the photobook assist menu.
Q Books can contain up to 300 pictures.
Q Books that contain no photos are automatically deleted.
■ Viewing Photobooks
Highlight a book in the photobook assist menu and press MENU/OK to display the book, then
press the selector left or right to scroll through the pictures.
Menus
65
ad
o
nl
ow
D
Using the Menus: Playback Mode
ed
m
fro
k PHOTOBOOK ASSIST (Continued)
■ Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The following options will be displayed; select the
desired option and follow the on-screen instructions.
• EDIT: Edit the book as described in “Creating a PhotoBook” (P 65).
• ERASE: Delete the book.
w
w
e
.b
re
or
nb
de
an
.v
w
Photobooks
Photobooks can be copied to a computer using the supplied MyFinePix Studio software.
b IMAGE SEARCH
Search for pictures.
1 Choose from the following options:
•
•
•
•
•
•
BY DATE: Search by date.
BY FACE: Search for faces from the face recognition database.
BY I FAVORITES: Search by rating.
BY SCENE: Search by scene.
BY TYPE OF DATA: Find all still pictures or all movies.
BY UPLOAD MARK: Find all pictures selected for upload to a specified destination.
2 Select a search condition. Only pictures that match the search condition will be displayed. To
delete or protect selected pictures or to view the search results in a slide show, press MENU/OK
and choose A ERASE (P 41), D PROTECT (P 70), or I SLIDE SHOW (P 69).
A ERASE
Delete all or selected pictures (P 41).
Option: FRAME/SELECTED FRAMES/ALL FRAMES
66
Menus
o
nl
ow
D
ad
Using the Menus: Playback Mode
ed
m
fro
w
w
.v
w
i MOVIE EDIT
Edit movies.
.b
re
or
nb
de
an
■ MOVIE TRIMMING
Remove opening or ending footage to create an edited copy of the current movie.
e
1 Display the desired movie.
2 Select i MOVIE EDIT in the playback menu, then select MOVIE TRIMMING. To remove
footage from the start of the copy, proceed to Step 3; otherwise, proceed to Step 4.
3 Press the selector down to begin playback and press it down again when the new opening
frame is reached.
4 Press MENU/OK. To remove footage from the end of the copy, proceed to Step 5; otherwise,
proceed to Step 6.
5 Press the selector down to begin playback and press it down again when the new closing
frame is reached.
6 Press MENU/OK to save the copy.
■ MOVIE JOIN
Add existing footage to the end of the current movie to create an edited copy.
1 Display the desired movie.
2 Select i MOVIE EDIT in the playback menu, then select MOVIE JOIN.
3 Press the selector left or right to highlight a movie.
4 Press MENU/OK to add the highlighted footage to the end of the current movie and save the
resulting copy, or press DISP/BACK to exit without creating a copy.
R Both movies must have been recorded at the same frame size and frame rate and have a
combined file size of no more than 2 GB.
Menus
67
ad
o
nl
ow
D
Using the Menus: Playback Mode
ed
m
fro
j MARK
j
MARK FOR UPLOAD TO
Select pictures for upload to YouTube, Facebook or MyFinePix.com using MyFinePix Studio
(Windows only).
w
w
de
an
.v
w
e
.b
re
or
nb
■ Selecting Pictures for Upload
1 Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos
and movies for upload to Facebook, or MyFinePix.com to choose photos for upload to MyFinePix.com.
2 Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press
DISP/BACK to exit when all the desired pictures are selected.
R Only movies can be selected for upload to YouTube.
R Only photos can be selected for upload to MyFinePix.com.
R During playback, selected pictures are indicated by j YouTube, j FACEBOOK or j MyFinePix.com icons.
■ RESET ALL: Deselecting All Pictures
Choose RESET ALL to deselect all pictures. If the number of pictures affected is very large, a
message will be displayed while the operation is in progress. Press DISP/BACK to exit before the
operation is complete.
■ Uploading Pictures (Windows Only)
Selected pictures can be uploaded using the YouTube/Facebook/MyFinePix.com Upload option in MyFinePix Studio.
Select with camera
Upload from computer
For information on installing MyFinePix Studio and connecting the camera to a computer, see
“Viewing Pictures on a Computer” (P 51).
68
Menus
o
nl
ow
D
ad
Using the Menus: Playback Mode
ed
m
fro
(defaults to MULTIPLE)
I SLIDE SHOW
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start.
Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at
any time by pressing MENU/OK.
w
w
re
or
nb
de
an
.v
w
Description
Press selector left or right to go back or skip ahead one frame. Select FADE-IN
for fade transitions between frames.
e
.b
Option
NORMAL
FADE-IN
NORMAL g
FADE-IN g
MULTIPLE
As above, except that camera automatically zooms in on faces selected with
Intelligent Face detection.
Display several pictures at once.
R The camera will not turn off automatically while a slide show is in progress.
B RED EYE REMOVAL
If the current picture is marked with a g icon to indicate that it was taken with Intelligent Face
Detection, this option can be used to remove red-eye. The camera will analyze the image; if redeye is detected, the image will be processed to create a copy with reduced red-eye.
1 Display the desired picture.
2 Select B RED EYE REMOVAL in the playback menu.
3 Press MENU/OK.
R Red eye may not be removed if the camera is unable to detect a face or the face is in profile.
Results may differ depending on the scene. Red eye can not be removed from pictures that
have already been processed using red-eye removal or pictures created with other devices.
R The amount of time needed to process the image varies with the number of faces detected.
R Copies created with B RED EYE REMOVAL are indicated by a e icon during playback.
Menus
69
ad
o
nl
ow
D
Using the Menus: Playback Mode
ed
m
fro
w
.b
re
or
nb
de
an
.v
w
1 Select D PROTECT in the playback menu.
2 Highlight one of the following options and press MENU/OK:
w
D PROTECT
Protect pictures from accidental deletion.
e
• FRAME: Protect selected pictures. Press the selector left or right to view pictures and press
MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.
• SET ALL: Protect all pictures.
• RESET ALL: Remove protection from all pictures.
Q Protected pictures will be deleted when the memory card is formatted (P
( 74).
G CROP
Create a cropped copy of the current picture.
1 Display the desired picture.
2 Select G CROP in the playback menu.
3 Use the zoom control to zoom in and out and use the selector to scroll the picture until the
desired portion is displayed.
4 Press MENU/OK to display a confirmation dialog.
5 Press MENU/OK again to save the cropped copy to a separate file.
R If the size of the final copy will be a, OK will be displayed in yellow.
70
Menus
o
nl
ow
D
ad
Using the Menus: Playback Mode
ed
m
fro
w
e
.b
re
or
nb
de
an
.v
w
1 Display the desired picture.
2 Select O RESIZE in the playback menu.
3 Highlight a size and press MENU/OK to display a confirmation dialog.
4 Press MENU/OK to save the resized copy to a separate file.
w
O RESIZE
Create a small copy of the current picture.
R The sizes available vary with the size of the original image.
C IMAGE ROTATE
Rotate pictures taken in tall orientation so that they are displayed in tall orientation in the LCD
monitor.
1 Display the desired picture.
2 Select C IMAGE ROTATE in the playback menu.
3 Press the selector down to rotate the picture 90 ° clockwise, up to rotate it 90 ° counterclockwise.
4 Press MENU/OK. The picture automatically be displayed in the selected orientation whenever it
is played back on the camera.
R Protected pictures can not be rotated. Remove protection before rotating pictures (P
( 70).).
R The camera may not be able to rotate pictures created with other devices.
K PRINT ORDER (DPOF)
Select pictures for printing on DPOF- and PictBridge-compatible devices (P 49).
Menus
71
ad
o
nl
ow
D
The Setup Menu
ed
m
fro
w
w
e
.b
re
or
nb
de
an
.v
w
Using the Setup Menu
1 Display the setup menu.
1.1 Press MENU/OK to display the menu for the current mode.
1.2 Press the selector left to highlight the tab for the current menu.
1.3 Press the selector down to highlight X.
SET-UP
SET
SET
EXIT
Tab
1.4 Press the selector right to place the cursor in the setup menu.
2 Adjust settings.
Highlight items and press the selector right to view options, then highlight an option and press MENU/OK. Press DISP/BACK to exit when settings
are complete.
72
Menus
o
nl
ow
D
ad
The Setup Menu
m
fro
w
w
nb
de
an
.v
w
F DATE/TIME
Set the camera clock (P 15).
ed
Setup Menu Options
e
.b
re
or
N TIME DIFFERENCE
(defaults to h)
Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the difference between local time and your home time zone:
1 Highlight g LOCAL and press the selector right.
2 Use the selector to choose the time difference between local time and your home time zone.
3 Press MENU/OK.
To switch between local time and your home time zone, highlight g LOCAL or h HOME and
press MENU/OK.
Option
h HOME
g LOCAL
Description
Switch to the time currently selected for F DATE/TIME (see above).
Switch to local time. If this option is selected, g and the time and date will
be displayed in yellow for three seconds each time the camera is turned on.
La
Choose a language (P 97).
(defaults to ENGLISH)
(defaults to OFF)
o SILENT MODE
Select ON to disable the speaker and flash in situations in which camera sounds or lights may be
unwelcome (note that the flash will still fire in C mode).
Menus
73
o
nl
ow
D
ad
The Setup Menu
ed
m
fro
R RESET
Reset all settings except F DATE/TIME, N TIME DIFFERENCE, O BACKGROUND COLOR,
and Q VIDEO SYSTEM to default values.
w
w
nb
de
an
.v
w
e
.b
re
or
1 Highlight R RESET and press the selector right to display a confirmation dialog.
2 Highlight OK and press MENU/OK.
K FORMAT
This option will format the memory card.
Q All data—including protected pictures—will be deleted from the memory card. Be sure important files have been copied to a computer or other storage device.
Q Do not open the battery-chamber cover during formatting.
A IMAGE DISP.
Choose how long pictures are displayed in the LCD monitor after shooting.
Option
3 SEC
1.5 SEC
ZOOM (CONTINUOUS)
OFF
(defaults to 1.5 SEC)
Description
Pictures are displayed for three seconds (3 SEC) or 1.5 seconds (1.5 SEC).
Colors may differ slightly from those in the final image.
Pictures are displayed until the MENU/OK button is pressed.
Pictures are not displayed after shooting.
R OFF has no effect in continuous shooting mode.
74
Menus
o
nl
ow
D
ad
The Setup Menu
ed
m
fro
(defaults to CONT.)
B FRAME NO.
New pictures are stored in image files named using a four-digit file
Frame number
number assigned by adding one to the last file number used. The file
100-0001
number is displayed during playback as shown at right. B FRAME NO.
controls whether file numbering is reset to 0001 when a new memory Directory
File
card is inserted or the current memory card is formatted.
number
number
w
w
e
.b
re
or
nb
de
an
.v
w
Option
CONTINUOUS
RENEW
Description
Numbering continues from the last file number used or the first available
file number, whichever is higher. Choose this option to reduce the number of pictures with duplicate file names.
Numbering is reset to 0001 after formatting or when a new memory card
is inserted.
R If the frame number reaches 999-9999, the shutter release will be disabled (P
( 92).
R Selecting R RESET ((P 74) sets B FRAME NO. to CONTINUOUS but does not reset the file
number.
R Frame numbers for pictures taken with other cameras may differ.
G OPERATION VOL.
(defaults to c)
Adjust the volume of the sounds produced when camera controls are operated. Choose e OFF
(mute) to disable control sounds.
H SHUTTER VOLUME
(defaults to c)
Adjust the volume of the sounds produced when the shutter is released. Choose e OFF (mute)
to disable the shutter sound.
Menus
75
o
nl
ow
D
ad
The Setup Menu
(defaults to i)
m
fro
w
w
an
.v
w
(defaults to 7)
J LCD BRIGHTNESS
Control the brightness of the display.
e
.b
re
or
nb
de
I PLAYBACK VOLUME
Adjust the volume for movie playback.
ed
e SHUTTER SOUND
Choose the sound made by the shutter.
(defaults to 0)
R When a shooting mode option other than P (PROGRAM AE) is selected, display brightness is
automatically adjusted during shooting regardless of a option selected for J LCD BRIGHTNESS in response to ambient lighting conditions.
E LCD MODE
Choose whether the display automatically dims to save power.
(defaults to U ON)
(defaults to 2 MIN)
M AUTO POWER OFF
Choose the length of time before the camera turns off automatically when no operations are
performed. Shorter times increase battery life; if OFF is selected, the camera must be turned
off manually. Note that in some situations the camera turns off automatically even when OFF
is selected.
L DUAL IS MODE
Choose from the following image stabilization options:
Option
CONTINUOUS
l CONTINUOUS
m SHOOTING
SHOOTING ONLY
OFF
76
(defaults to l)
Description
Image stabilization on.
As above, except that image stabilization is performed only when
the shutter button is pressed halfway or the shutter is released.
Image stabilization off. Choose this option when using a tripod.
Menus
o
nl
ow
D
ad
The Setup Menu
ed
m
fro
(defaults to ON)
B RED EYE REMOVAL
Choose ON to remove red-eye effects caused by the flash when shooting with Intelligent Face
Detection.
w
w
.b
re
or
nb
de
an
.v
w
R Red-eye reduction is performed only when a face is detected.
e
(defaults to ON)
m BLINK DETECTION
Choose ON to activate blink detection. If an option other than OFF is selected for A IMAGE
DISP. (P
( 74)
74), a warning will be displayed if the camera detects subjects who may have blinked
when the picture was taken. If ZOOM (CONTINUOUS) is selected, you can press the f button
to zoom in on these subjects.
Option: ON/OFF
BLINK DETECTION
BLINK DETECTION
FACE ZOOM
STORE
NEXT
STORE
ERASE
ERASE
R Blink detection is not performed if the camera fails to detect a face or when OFF is selected
for A IMAGE DISP..
DISP..
Menus
77
o
nl
ow
D
ad
The Setup Menu
ed
m
fro
(defaults to OFF)
R INTELLIGENT DIGITAL ZOOM
If ON is selected, selecting i at the maximum optical zoom position triggers intelligent digital
zoom, further magnifying the image while processing it for sharp, high-resolution results.
w
w
nb
de
an
.v
w
i
Optical zoom
j
INTELLIGENT DIGITAL
ZOOM off
e
j
INTELLIGENT DIGITAL
ZOOM on
.b
re
or
The Zoom Indicator
Intelligent
digital zoom
i
Optical zoom
R Selecting another mode may end intelligent digital zoom and restore maximum optical
zoom.
R Intelligent digital zoom may sometimes produce lower quality images than optical zoom.
R The time needed to record images increases.
R The effects are not visible in the display during shooting.
R Intelligent digital zoom is not available in continuous mode or during movie recording.
p MOVIE ZOOM TYPE
Choose the zoom type when recording movies.
(defaults to 1)
R Digital zoom produces lower quality images than optical zoom.
78
Menus
o
nl
ow
D
ad
The Setup Menu
ed
m
fro
(defaults to ON)
C AF ILLUMINATOR
If ON is selected, the AF-assist illuminator will light to assist autofocus.
Q The camera may be unable to focus using the AF-assist illuminator in some cases. If the camera is unable to focus in macro mode, try increasing the distance to the subject.
Q Avoid shining the AF-assist illuminator directly into your subject’s eyes.
w
w
e
.b
re
or
nb
de
an
.v
w
n SAVE ORG IMAGE
Select ON to save unprocessed copies of pictures taken with red-eye removal.
(defaults to OFF)
O BACKGROUND COLOR
Choose a color scheme.
c GUIDANCE DISPLAY
Choose whether to display tool tips.
(defaults to ON)
Q VIDEO SYSTEM
Choose a video mode for connection to a TV.
Option
NTSC
PAL
Menus
Description
Select this mode for connection to video devices in North America, the Caribbean, parts of Latin America, and some East Asian countries.
Select this mode for connection to video devices in the United Kingdom and
much of Europe, Australia, New Zealand, and parts of Asia and Africa.
79
ad
o
nl
ow
D
The Setup Menu
ed
m
fro
(defaults to OFF)
S DATE STAMP
To add shooting date and time, choose T + U. To add only shooting date, choose T. When
OFF is selected, no information will be added to the pictures.
w
w
nb
de
an
.v
w
e
.b
re
or
Q Added shooting date and time can not be deleted from the pictures. To take pictures without
date and time, select OFF for S DATE STAMP.
STAMP.
Q When the camera clock is not set, setting dialog will be displayed. Set the date and time ((P 15).).
Q When using S DATE STAMP,
STAMP, selecting WITHOUT DATE for K PRINT ORDER (DPOF) is
recommended (P
( 49).).
Q Date and time can not be added to the movies and the panoramas.
80
Menus
o
nl
ow
D
ad
Technical Notes
ed
fro
m
Optional Accessories
w
w
w
FINEPIX T500 Series
e
DIGITAL CAMERA
■ Printing
.b
re
or
nb
de
an
.v
The camera supports a wide range of accessories from FUJIFILM and other
manufacturers.
■ Audio/Visual
A/V cable (optional)
USB cable
(supplied)
PictBridge-compatible
printer *1
TV *1
HDMI cable
(sold separately)
SD/SDHC/SDXC
memory card
Printer *1
■ Computer Related
USB cable (supplied)
SD card slot or card reader
Computer *1
HDP-L1
HD player *2
HDTV *1
■ Digital viewer
Supports 3D display of
pictures taken using INDIVD.
SHUTTER 3D.
3D.
FINEPIX REAL 3D V3 *2 (sold separately)
■ 3D print
Photos taken in INDIVD. SHUTTER 3D.
3D.
http://fujifilm.com/3d/print/
*1 Available separately.
*2 SDXC memory card is not supported.
81
ad
o
nl
ow
D
Optional Accessories
ed
m
fro
Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the latest information on the accessories available in your region, check with your
local FUJIFILM representative or visit http://www.fujifilm.com/products/digital_
cameras/index.html.
w
w
e
.b
re
or
nb
de
an
.v
w
Rechargeable NP-45A: Additional large-capacity NP-45A rechargeable
Li-ion batteries batteries can be purchased as required.
Battery
chargers
BC-45W: Replacement battery chargers can be purchased
as required. The BC-45W charges an NP-45A/NP-45B
battery in about 120 minutes at +20 °C (+68 °F).
A/V cable
AV-C1: Use for viewing pictures on TV.
AV-C1
HD players
HDP-L1 (requires HDMI cable, available from third-party suppliers): Connect to a High Definition (HD) TV to view photographs
and movies from SD/SDHC memory cards.
Digital viewer FINEPIX REAL 3D V3:
V3 View 3D images without 3D glasses.
82
Technical Notes
ad
o
nl
ow
D
Caring for the Camera
ed
m
fro
To ensure continued enjoyment of the product, observe the following precautions.
w
w
or
nb
■ Water and Sand
Exposure to water and sand can also
damage the camera and its internal
circuitry and mechanisms. When
using the camera at the beach or
seaside, avoid exposing the camera
to water or sand. Do not place the
camera on a wet surface.
e
.b
re
Technical Notes
de
an
.v
w
Storage and Use
If the camera will not be used for an
extended period, remove the battery
and memory card. Do not store or
use the camera in locations that are:
• exposed to rain, steam, or smoke
• very humid or extremely dusty
• exposed to direct sunlight or very
high temperatures, such as in a
closed vehicle on a sunny day
• extremely cold
• subject to strong vibration
• exposed to strong magnetic fields,
such as near a broadcasting antenna, power line, radar emitter, motor,
transformer, or magnet
• in contact with volatile chemicals
such as pesticides
• next to rubber or vinyl products
■ Condensation
Sudden increases in temperature,
such as occur when entering a heated
building on a cold day, can cause condensation inside the camera. If this
occurs, turn the camera off and wait
an hour before turning it on again. If
condensation forms on the memory
card, remove the card and wait for the
condensation to dissipate.
83
ad
o
nl
ow
D
Caring for the Camera
ed
m
fro
Cleaning
Use a blower to remove dust from the lens and LCD monitor, then gently wipe
with a soft, dry cloth. Any remaining stains can be removed by wiping gently
with a piece of FUJIFILM lens-cleaning paper to which a small amount of lenscleaning fluid has been applied. Care should be taken to avoid scratching the
lens or LCD monitor. The camera body can be cleaned with a soft, dry cloth.
Do not use alcohol, thinner, or other volatile chemicals.
w
w
e
.b
re
or
nb
de
an
.v
w
Traveling
Keep the camera in your carry-on baggage. Checked baggage may suffer
violent shocks that could damage the camera.
84
Technical Notes
ad
ed
m
fro
w
w
Problems and Solutions
o
nl
ow
D
Troubleshooting
nb
de
Solution
• The battery is exhausted
exhausted:: Charge the battery ((P
P 11) or insert a fully-charged spare battery
(P 6).
• The battery is inserted incorrectly:
incorrectly: Reinsert in the correct orientation (P
(P 6).
• The battery-chamber cover is not latched
latched:: Latch the battery-chamber cover (P
(P 6).
• The battery is cold
cold:: Warm the battery by placing it in a pocket or other warm place and reinsert
it in the camera immediately before taking a picture.
• There is dirt on the battery terminals
terminals:: Clean the terminals with a soft, dry cloth.
• Q is selected for shooting mode
mode:: Select B mode to reduce the drain on the battery
(P 20).
• x TRACKING is selected for F AF MODE:
MODE: Select a different AF mode ((P
P 62).
• The battery has been charged many times
times:: The battery has reached the end of its charging
life. Purchase a new battery.
e
.b
re
or
Problem
an
.v
w
Power and Battery
The camera does not
turn on.
The battery runs down
quickly.
The camera turns off
suddenly.
Charging is slow.
The battery does not
charge. / Battery fault
icon s is displayed.
Charge the battery (P
(P 11) or insert a fully-charged spare battery ((P
P 6).
Charge the battery at room temperature (P
(P vi).
• Reinsert the battery in the correct orientation and make sure that the power connection is made
(P 6, 11).
• There is dirt on the battery terminals
terminals:: Clean the terminals with a soft, dry cloth.
• The battery has been charged many times
times:: The battery has reached the end of its charging
life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.
• The battery is too hot or too cold
cold:: Wait for the battery temperature to stabilize (P
(P 99).
85
ad
o
nl
ow
D
Problems and Solutions
ed
m
w
.b
re
or
nb
de
Select ENGLISH for L a ((P
P 15, 73).
an
.v
w
Solution
w
Problem
Menus and displays are
not in English.
fro
Menus and Displays
e
Shooting
Problem
•
•
•
No picture is taken when •
the shutter button is
•
pressed.
•
•
Solution
Memory is full:
full: Insert a new memory card or delete pictures ((P
P 7, 41).
Memory is not formatted:
formatted: Format the memory card (P
(P 74).
There is dirt on the memory card contacts
contacts:: Clean the contacts with a soft, dry cloth.
The memory card is damaged
damaged:: Insert a new memory card (P
(P 7).
The battery is exhausted
exhausted:: Charge the battery ((P
P 11) or insert a fully-charged spare battery
(P 6).
The camera has turned off automatically
automatically:: Turn the camera on ((P
P 13).
The shutter button is pressed right after shooting a panorama:
panorama: Wait for a little while
then press the shutter button (P
(P 24).
The LCD monitor goes
dark after shooting.
The LCD monitor may darken while the flash charges. Wait for the flash to charge ((P
P 32).
The camera does not
focus.
• The subject is close to the camera
camera:: Select macro mode (P
(P 31).
• The subject is far away from the camera
camera:: Cancel macro mode (P
(P 31).
• The subject is not suited to autofocus
autofocus:: Use focus lock ((P
P 29).
Macro mode is not
Choose a different shooting mode ((P
P 20).
available
Intelligent Face Detection Intelligent Face Detection is not available in the current shooting mode:
mode: Choose a differis not available.
ent shooting mode (P
(P 20).
86
Troubleshooting
o
nl
ow
D
ad
Problems and Solutions
ed
Solution
• The subject’s face is obscured by sunglasses, a hat, long hair, or other objects:
objects: Remove
the obstructions.
• The subject’s face occupies only a small area of the frame
frame:: Change the composition so that
the subject’s face occupies a larger area of the frame ((P
P 17).
• The subject’s head is tilted or horizontal
horizontal:: Ask the subject to hold their head straight.
• The camera is tilted
tilted:: Keep the camera level (P
(P 17).
• The subject’s face is poorly lit
lit:: Shoot in bright light.
The selected subject is closer to the center of the frame than the main subject. Recompose the
picture or turn face detection off and frame the picture using focus lock (P
(P 29).
• The flash is not available in the current shooting mode
mode:: Choose a different shooting mode
(P 20).
• The battery is exhausted
exhausted:: Charge the battery ((P
P 11) or insert a fully-charged spare battery
(P 6).
• The camera is in continuous mode
mode:: Select OFF for R CONTINUOUS ((P
P 61).
• The camera is in silent mode
mode:: Turn silent mode off (P
(P 73).
• The flash is off (P): Choose a different flash mode ((P
P 32).
• The desired flash mode is not available in the current shooting mode
mode:: Choose a different
shooting mode (P
(P 20).
• The camera is in silent mode
mode:: Turn silent mode off (P
(P 73).
• The subject is not in range of the flash
flash:: Position the subject in range of the flash (P
(P 97).
• The flash window is obstructed
obstructed:: Hold the camera correctly ((P
P 17).
• The lens is dirty
dirty:: Clean the lens ((P
P 84).
• The lens is blocked
blocked:: Keep objects away from the lens (P
(P 17).
• s is displayed during shooting and the focus frame is displayed in red:
red: Check focus
before shooting ((P
P 90).
• k is displayed during shooting:
shooting: Use the flash or a tripod (P
(P 33).
m
fro
Problem
w
w
e
.b
re
or
nb
de
an
.v
w
No face is detected.
Wrong subject is
selected.
The flash does not fire.
Some flash modes are
not available.
The flash does not fully
light the subject.
Pictures are blurred.
Troubleshooting
87
ad
ed
Solution
This is normal when slow shutter speeds are selected at high temperatures and does not indicate
a malfunction.
The camera has been used continuously at high temperatures. Turn the camera off and wait for
it to cool down.
Vertical purple or white lines may appear after the camera has been used continuously at high
temperatures or when a very bright object is in the frame; this phenomenon is common to all CCD
image sensors and does not indicate a malfunction. These lines are recorded in movies but do not
appear in photographs. Avoid framing bright objects when filming movies.
m
fro
Problem
o
nl
ow
D
Problems and Solutions
w
w
e
.b
re
or
nb
Vertical lines appear in
pictures.
“Smear” in the form of
vertical purple or white
lines appears in the
display.
de
an
.v
w
Pictures are mottled.
Playback
Problem
Solution
Pictures are grainy.
The pictures were taken with a different make or model of camera.
Playback zoom is unavailThe pictures were created using O RESIZE or with a different make or model of camera.
able.
• Playback volume is too low:
low: Adjust playback volume (P
(P 76).
No sound in movie
• The microphone was obstructed
obstructed:: Hold the camera correctly during recording ((P
P 17, 43).
playback.
• The speaker is obstructed
obstructed:: Hold the camera correctly during playback ((P
P 45).
Selected pictures are not Some of the pictures selected for deletion are protected. Remove protection using the device with
deleted.
which it was originally applied (P
(P 70).
File numbering is
The battery-chamber cover was opened while the camera was on. Turn the camera off before
unexpectedly reset.
opening the battery-chamber cover (P
(P 13).
88
Troubleshooting
o
nl
ow
D
ad
Problems and Solutions
Solution
The camera is not properly connected
connected:: Connect the camera properly (P
(P 46).
An A/V cable was connected during movie playback:
playback: Connect the camera once movie playback has ended.
Input on the television is set to “TV”:
“TV”: Set the TV input correctly.
The camera is not set to the correct video standard:
standard: Match the camera Q VIDEO SYSTEM setting to the TV (P
(P 79).
• The volume on the TV is too low:
low: Adjust the volume.
Match the camera Q VIDEO SYSTEM setting to the TV (P
(P 79).
w
w
e
.b
re
or
nb
de
an
•
•
•
•
.v
w
No color
The computer does not
recognize the camera.
Pictures can not be
printed.
Only one copy is printed/
the date is not printed.
The camera is unresponsive.
The camera does not
function as expected.
No sound.
Date and time added by
S DATE STAMP
are not correct.
m
No picture or sound.
fro
Problem
ed
Connections/Miscellaneous
Be sure the camera and computer are correctly connected ((P
P 53).
• The camera is not properly connected
connected:: Connect the camera correctly (P
(P 47).
• The printer is off
off:: Turn the printer on.
The printer is not PictBridge compatible.
• Temporary camera malfunction:
malfunction: Remove and reinsert the battery (P
(P 6).
• The battery is exhausted
exhausted:: Charge the battery ((P
P 11) or insert a fully-charged spare battery (P
(P 6).
Remove and reinsert the battery (P
(P 6). If the problem persists, contact your FUJIFILM dealer.
Turn silent mode off (P
(P 73).
The camera clock is not correctly set
set:: Reset the date and time (P
(P 15).
T + U or T is selected for S DATE STAMP option
option:: Added shooting date and time
Date and time are added
can not be deleted from the pictures. To take pictures without date and time, select OFF for
to the pictures.
S DATE STAMP ((P
P 80).
Troubleshooting
89
ad
o
nl
ow
D
Warning Messages and Displays
ed
m
fro
The following warnings are displayed in the LCD monitor:
w
w
w
Description
Low battery. Charge the battery ((P
P 11) or insert a fully-charged spare battery ((P
P 6).
Battery exhausted. Charge the battery (P
(P 11) or insert a fully-charged spare battery ((P
P 6).
Slow shutter speed. Pictures may be blurred; use the flash or a tripod.
The camera can not focus. Try one of the following solutions:
s
• Use focus lock to focus on another subject at the same distance, then recompose the picture
(displayed in red with red
(P 29).
focus frame)
frame)
• Use macro mode to focus when taking close-ups (P
(P 31).
Aperture or shutter speed The subject is too bright or too dark and the picture will be over- or under-exposed. If the subject
displayed in red
is dark, use the flash (P
(P 32).
FOCUS ERROR
Camera malfunction or moving parts of lens obstructed. Turn the camera off and then on again,
TURN OFF THE CAMERA
taking care not to touch the lens. If the message persists, contact a FUJIFILM dealer.
AND TURN ON AGAIN
• The memory card is not formatted or was formatted in a computer or other device
device::
Format the memory card using the K FORMAT option in the camera setup menu ((P
P 74).
CARD NOT INITIALIZED • The memory card contacts require cleaning
cleaning:: Clean the contacts with a soft, dry cloth. If
the message is repeated, format the card (P
(P 74). If the message persists, replace the card.
• Camera malfunction:
malfunction: Contact a FUJIFILM dealer.
PROTECTED CARD
The memory card is locked. Unlock the card ((P
P 7).
BUSY
The memory card is incorrectly formatted. Use the camera to format the card (P
(P 74).
e
.b
re
or
nb
de
an
90
.v
Warning
B ((red
red))
A ((blinks
blinks red)
red)
k
Troubleshooting
o
nl
ow
D
ad
Warning Messages and Displays
ed
Description
The memory card is not formatted for use in the camera. Format the card (P
(P 74).
The memory card contacts require cleaning or the memory card is damaged. Clean the contacts
with a soft, dry cloth. If the message is repeated, format the card ((P
P 74). If the message persists,
replace the card.
Incompatible memory card. Use a compatible card (P
(P 9).
Camera malfunction. Contact a FUJIFILM dealer.
The memory card is full and pictures can not be recorded or copied. Delete pictures or insert a
memory card with more free space.
• Memory card error or connection error
error:: Reinsert the card or turn the camera off and then
on again. If the message persists, contact a FUJIFILM dealer.
• Not enough memory remaining to record additional pictures
pictures:: Delete pictures or insert
a memory card with more free space.
• The memory card is not formatted
formatted:: Format the memory card (P
(P 74).
• The file is corrupt or was not created with the camera
camera:: The file can not be viewed.
• The memory card contacts require cleaning
cleaning:: Clean the contacts with a soft, dry cloth. If
the message is repeated, format the card (P
(P 74). If the message persists, replace the card.
• Camera malfunction:
malfunction: Contact a FUJIFILM dealer.
m
fro
Warning
w
w
e
.b
re
or
nb
de
an
.v
w
CARD ERROR
b MEMORY FULL
WRITE ERROR
READ ERROR
Troubleshooting
91
ad
ed
Description
The camera has run out of frame numbers (current frame number is 999-9999). Format the
memory card and select RENEW for B FRAME NO. Take a picture to reset frame numbering to 100-0001, then select CONTINUOUS for B FRAME NO. ((P
P 75).
m
fro
Warning
o
nl
ow
D
Warning Messages and Displays
w
w
or
nb
de
an
.v
w
FRAME NO. FULL
e
.b
re
PRESS AND HOLD
An attempt was made to choose a flash mode or adjust the volume with the camera in silent
THE DISP BUTTON TO
mode. Exit silent mode before choosing a flash mode or adjusting the volume ((P
P 73).
DEACTIVATE SILENT MODE
A search has returned more 5,000 results, or more than 999 frames were selected for deletion.
TOO MANY FRAMES
Perform a different search or select fewer pictures.
An attempt was made to delete or rotate to a protected picture. Remove protection and try
PROTECTED FRAME
again (P
(P 70).
a pictures can not be cropped.
a CAN NOT CROP
CAN NOT CROP
The picture is damaged or was not created with the camera.
An attempt was made to create a resized copy at a size equal to or larger than the original.
a CANNOT EXECUTE
Choose a smaller size.
CAN NOT ROTATE
An attempt was made to rotate a picture that can not be rotated.
F CAN NOT ROTATE Movies can not be rotated.
92
Troubleshooting
o
nl
ow
D
ad
Warning Messages and Displays
m
fro
Description
ed
w
w
re
or
nb
de
an
.v
No memory card inserted; insert a memory card.
w
Warning
NO CARD
INSERT A NEW CARD
NO CARD
DPOF FILE ERROR
CAN NOT SET DPOF
F CAN NOT SET DPOF
e
Troubleshooting
.b
The DPOF print order on the current memory card contains more than 999 images.
The picture can not be printed using DPOF.
Movies can not be printed using DPOF.
A connection error occurred while pictures were being printed or copied to a computer or other
COMMUNICATION ERROR
device. Confirm that the device is turned on and that the USB cable is connected.
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details).
PRINTER ERROR
To resume printing, turn the printer off and then turn it back on.
PRINTER ERROR
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If
RESUME?
printing does not resume automatically, press MENU/OK to resume.
An attempt was made to print a movie, a picture not created with the camera, or a picture in a
format not supported by the printer. Movies and some pictures created with other devices can
CANNOT BE PRINTED not be printed; if the picture is a still picture created with the camera, check the printer manual
to confirm that the printer supports the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures
can not be printed.
93
o
nl
ow
D
ad
Appendix
ed
fro
m
Memory Card Capacity
w
w
w
e
.b
re
or
nb
de
an
.v
The following table shows the recording time or number of pictures available
at different image sizes. All figures are approximate; file size varies with the
scene recorded, producing wide variations in the number of files that can be
stored. The number of exposures or length remaining may not diminish at an
even rate.
Medium
2 GB
O
Photographs
Movies*
T
O 4:3
O 3:2
O 16:9
P 4:3
P 16:9
Q 4:3
Q 16:9
h1280†
FINE
240
470
920
270
310
700
1,680
4 GB
NORMAL
470
920
1,740
530
620
1,340
3,040
9 min.
FINE
480
940
1,840
540
640
1,400
3,360
NORMAL
950
1,840
3,490
1,060
1,250
2,690
6,080
18 min.
8 GB
FINE
970
1,890
3,690
1,080
1,280
2,810
6,720
NORMAL
1,910
3,680
6,980
2,130
2,510
5,380
12,160
37 min.
f
27 min.
55 min.
111 min.
g
58 min.
116 min.
233 min.
* Individual movies can not exceed 2 GB in size or 29 minutes in length. If more than 2 GB are available, the camera will show the time remaining for a movie 2 GB in size.
† Use a G card or better when shooting HD movies.
94
Digital Camera FinePix T500 Series
16 million
1/2.3 -in., square-pixel CCD with primary color filter
SD/SDHC/SDXC memory cards
Compliant with Design Rule for Camera File System (DCF)
(DCF),, Exif 2.3, and Digital Print Order
Format (DPOF)
• Still pictures:
pictures: Exif 2.3 JPEG (compressed)
• Movies
Movies:: AVI (Motion JPEG) • Audio: Liner PCM/monaural sound
• Still pictures (3D)
(3D):: MPO
• O 4 : 3:
3: 4,608 × 3,440
• O 3 : 2:
2: 4,608 × 3,072
• O 16 : 9:
9: 4,608 × 2,592
• P 4 : 3:
3: 3,264 × 2,448
• P 16 : 9:
9: 3,072 × 1,728
• Q 4 : 3:
3: 2,304 × 1,728
• Q 16 : 9:
9: 1,920 × 1,080
Fujinon 12 × optical zoom lens, F3.4 (wide angle) – F6.9 (telephoto)
f=4.3 mm–51.6 mm (35-mm format equivalent: 24 mm–288 mm)
• Intelligent digital zoom:
zoom: Approx. 2.0 × (up to 24.0 × when combined with optical zoom)
w
w
e
.b
re
or
nb
de
an
.v
w
Appendix
m
Lens
Focal length
Digital zoom
fro
Image size (pixels)
ed
File format
ad
System
Model
Effective pixels
CCD
Storage media
File system
o
nl
ow
D
Specifications
95
ad
ed
m
fro
System
Aperture
Focus range
(distance from front of lens)
Sensitivity
o
nl
ow
D
Specifications
w
e
.b
re
or
nb
de
an
.v
w
96
w
F3.4/F8.6 (wide angle),
angle), F6.9/F17.6 (telephoto)
(telephoto);; uses Neutral Density (ND
(ND)) filter
Approx. 40 cm (1.3 ft.)–infinity (wide angle);
angle); 100 cm (3.2 ft.)–infinity (telephoto)
• Macro
Macro:: approx. 5 cm–100 cm/0.1 ft.–3.2 ft. (wide angle);
angle); 100 cm–2.0 m/3.2 ft.–6.5 ft. (telephoto)
Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 3200 (image size Q);
AUTO
Metering
256-segment throughhrough-tthehe-llens (TTL) metering
Exposure control
Programmed AE
Exposure compensation –2 EV – +2 EV in increments of 1/3 EV
Picture stabilization
Optical stabilization (lens-shift type)
Shutter speed
• AUTO mode:
mode: 1/4 s–
s–11/2,000 s
(combined mechanical and • Other modes:
modes: 8 s–1
s–1/2,000 s
electronic shutter)
Continuous
Up to 1.1 fps; max. 3 frames
Focus
• Mode
Mode:: Single AF, continuous AF
• Autofocus system:
system: Contrast-detect TTL AF
• Focus-area selection
selection:: CENTER, TRACKING
White balance
Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight fluorescent, warm white fluorescent, cool white fluorescent, and incandescent
Self-timer
Off, 10 sec., 2 sec.
Appendix
o
nl
ow
D
ad
Specifications
ed
m
fro
CCD-metered auto flash control; effective range when sensitivity is set to AUTO is approx.
50 cm–5.8 m/1.6 ft.–19.0 ft. (wide angle),
angle), 90 cm–2.8 m/2.9 ft.–9.1 ft. (telephoto)
(telephoto);; effective
range in macro mode is approx. 50 cm–5.8 m/1.6 ft.–19.0 ft. (wide angle),
angle), 90 cm–2.8 m/2.9 ft.–
9.1 ft. (telephoto)
AUTO,, N, P, O (red-eye removal off)
AUTO
off);; K, L, P, M (red-eye removal on)
FinePix T550 - T595
3.0-in. (7.6 cm),
cm), 460k-dot color LCD monitor; frame coverage approx. 96%
FinePix T500 - T545
2.7-in. (6.9 cm),
cm), 230k-dot color LCD monitor; frame coverage approx. 96%
• h 1280
1280:: 1,280 × 720 (720p)
(720p),, 30 fps
• f: 640 × 480 (VGA)
(VGA),, 30 fps
• g: 320 × 240, 30 fps
Arabic, Bulgarian, Simplified Chinese, Traditional Chinese, Czech, Danish, Dutch, English, Farsi,
Finnish, French, German, Greek, Hebrew, Hungarian, Indonesian, Italian, Japanese, Kazakh,
Korean, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, Serbian,
Slovak, Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese
w
w
Movie frame rate
Languages
e
Flash mode
LCD monitor
.b
re
or
nb
de
an
.v
w
System
Flash
Input/output terminals
A/V OUT
NTSC or PAL output with monaural sound
(audio/video output)
Digital input/output
USB 2.0 High-Speed; shares A/V OUT connector; MTP/PTP
Appendix
97
ad
o
nl
ow
D
Specifications
ed
m
fro
Power supply/other
Power supply
NP-45A/NP-45B rechargeable battery
Battery life (approximate
Battery type
Approximate number of frames
number of frames that can
FinePix T550 - T595: 200
be taken with a fully-charged NP-45A/NP-45B (type supplied with camera)
FinePix T500 - T545: 230
battery)
CIPA standard, measured in B (auto) mode using battery supplied with camera and SD memory card.
w
w
e
.b
re
or
nb
de
an
.v
w
Note: Number of shots that can be taken with battery varies with battery charge level and will
Note:
decline at low temperatures.
Charging time
Approx. 120 minutes (+20 °C/+68 °F)
Dimensions (W × H × D) 99.4 mm × 57.0 mm × 25.8 mm/3.9 in. × 2.2 in. × 1.0 in.,
excluding projections (minimum depth 18.6 mm/0.7 in.)
Shooting weight
FinePix T550 - T595
Approx. 141 g/4.9 oz., including battery and memory card
FinePix T500 - T545
Approx. 136 g/4.7 oz., including battery and memory card
Weight
FinePix T550 - T595
Approx. 124 g/4.3 oz., excluding battery, accessories, and memory card
FinePix T500 - T545
Approx. 120 g/4.2 oz., excluding battery, accessories, and memory card
Operating conditions
• Temperature
Temperature:: 0 °C – +40 °C/+32 °F – +104 °F
• Humidity
Humidity:: 10 % – 80 % (no condensation)
98
Appendix
o
nl
ow
D
ad
Specifications
m
w
w
e
.b
re
or
nb
de
an
.v
w
100 V–240 V AC, 50/60 Hz
• 100 V:
V: 10 VA
5.0 V DC, 1000 mA
0 °C – +40 °C/+32 °F – +104 °F
Approx. 42 g/1.5 oz., excluding battery
fro
AC power adapter
Rated input
Input capacity
Rated output
Operating temperature
Weight
ed
NP-45A/NP-45B rechargeable battery
Nominal voltage
DC 3.7 V
Nominal capacity
720 mAh
Operating temperature 0 °C – +40 °C/+32 °F – +104 °F
Dimensions (W × H × D) 31.0 mm × 39.6 mm × 6.0 mm/1.2 in. × 1.5 in. × 0.2 in.
Weight
Approx. 15.5 g/0.5 oz.
• 240 V:
V: 20 VA
Weight and dimensions may vary with the country or region of sale.
■ Notices
• Specifications subject to change without notice. FUJIFILM shall not be held liable for
damages resulting from errors in this manual.
• Although the LCD monitor is manufactured using advanced high-precision technology, small bright points and anomalous colors may appear, particularly in the vicinity
of text. This is normal for this type of LCD monitor and does not indicate a malfunction; images recorded with the camera are unaffected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g.,
electric fields, static electricity, or line noise).
• Due to the type of lens used, some distortion may occur at the periphery of images.
This is normal.
Appendix
99
ad
ed
m
fro
w
w
e
.b
re
or
nb
de
an
.v
w
100
o
nl
ow
D
Memo
ad
o
nl
ow
D
ed
Memo
m
fro
w
w
e
.b
re
or
nb
de
an
.v
w
101
ad
o
nl
ow
D
ed
m
fro
w
w
e
.b
re
or
nb
de
an
.v
w
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
Please contact your local distributor for repairs and technical support. (see Worldwide
Network list)
Download PDF
Similar pages