advertisement
3804 South Street
75964-7263, TX Nacogdoches
Phone: 936-569-7941
Fax: 936-560-4685
T101R 40A 120V SPST Nema 3R Time Clock
Intermatic Inc.
Catalog Number
Manufacturer
Description
T101R
Intermatic Inc.
The Nema 3R - Steel Case 125 V SPST Gray Case The Heavy Duty
Mechanical Time Switch Is Designed For Industrial, Commercial and Residential Applications. Features A High Horsepower Rating
That Is Ideal For Loads Up to 40 Amps Resistive From 120-Volts and Direct 24-Hour Time Switch Control Of Most Loads. All
Models Are Equipped With One "On" and One "Off" Tripper. The
Unit Contains A 1-Circuit Standard On/Off Single Pole Single
Throw 40 Amps, 4000 Watt Capacity, 120 Volts.
3.8 (lbs/each)
Mechanical Time Switches
Weight per unit
Product Category
Features
action amperage rating connection
Contact Configuration
Contact Rating
Poles
Timing Range
Voltage Rating
Wattage
Dimensions and Weight
Size
SPST
40
Teeter Type
1 NO
40 AMP @ 120 - 480 VAC (Resistive), 40 AMP @ 120 - 277
(Tungsten)
1
0-24
125
3
5-1/2 LENGTH X 4 WIDTH X 9-3/8 HEIGHT IN, 13.97 LENGTH X
10.16 WIDTH X 23.81 HEIGHT CM
3804 South Street
75964-7263, TX Nacogdoches
Phone: 936-569-7941
Fax: 936-560-4685
Descriptions
Description
Long Description
Product Type special features
40A 120V SPST NEMA 3R TIME CLOCK
The NEMA 3R - Steel Case 125 V SPST Gray Case The heavy duty mechanical time switch is designed for industrial, commercial and residential applications. Features a high horsepower rating that is ideal for loads up to 40 amps resistive from 120-volts and direct 24-hour time switch control of most loads. All models are equipped with one "ON" and one "OFF" tripper. The unit contains a 1-circuit standard On/Off Single Pole Single Throw 40 Amps,
4000 watt capacity, 120 volts.
T101-R/T, Steel/Gray Case
Features: Provides direct 24-Hour control of most loads, 1 to 12
ON/OFF operations each day, Minimum ON/OFF times of 1 hour,
Manual override, 1 Year Warranty
Manufacturer Information
Brand
GTIN
Manufacturers Part Number
UPC
Intermatic Inc.
00078275000056
T101R
078275000056
Taxonomies, Classifications, and Categories
Category Description TIME CLOCKS
Type Electromechanical
Packaging
Carton
Package
Weight Per each
Uses, Certifications, and Standards
Application
Enclosure
Mounting
Operating Temperature standard
1
6
3.75
Commercial, Industrial, Residential, Outdoor, HVACR
NEMA 3R Steel
WALL MOUNT
-40 to +130 DEG F, -40 to +54 DEG C cCSAus Certified, HVACR
T100 Series
Electromechanical Time Switches
T100 Series
The T100 Series Mechanical Time Switches are heavy-duty switches that have the highest horsepower ratings in the industry for industrial, commercial and residential applications.
Features
• Provides direct 24-Hour control of most loads
• Control electrical loads up to 40 Amps
• 1 to 12 ON/OFF operations each day
• Minimum ON/OFF times of 1 hour
• Manual override
• All models equipped with one ON and one OFF tripper
Ratings
Enclosure Type:
Knockouts: "- 3 ⁄
4
" nominal knockouts, one on back and on each side, and two on bottom
Switch Type:
Switch Rating:
See table
See table
Each Pole
40 Amp Resistive, 120-480 VAC
40 Amp Tungsten, Inductive or 1000 VA Pilot Duty,
120-277 VAC
2 HP (24 FLA) 120 VAC
5 HP (28 FLA) 240 VAC single-phase
Power Input: 3 W Maximum
Operating Temperature: -40°F to 130°F (-40°C to 54°C)
Shipping Weight:
Warranty:
Type 1 - 3 lbs. (1.4 kg)
Type 3R - 4 lbs. (1.8 kg)
Limited 1 year
Project:
Location:
Product Type:
Contact/Phone:
Model #:
T101R
T104PCD82
Model with
Type 1 Steel
Enclosure
Model with
Type 3R Steel
Enclosure
T101
T102
T103
T104
T104-50
T101B**
T105
T101R
T102R
T103R
T104R
-
-
-
N/A T106R
*Can be wired SPDT
**Separate Clock Motor Terminals
-
-
-
T101P
T102P
T103P
T104P
-
Model with Type 3R
Plastic
Enclosure
-
-
-
Model with
Plastic Type 3R
Enclosure with
See Through
Cover
T101PCD82
-
T103PCD82
T104PCD82
-
Switch
Type
SPST
SPST
DPST
DPST
DPST
SPST
1NO/1NC*
1NO/1NC*
Clock
Motor Volts
T101
Hz
125
208-277
125
208-277
208-277
125
125
208-277
60
50
60
60
60
60
60
60
Amps/
Pole
HP
Rating
40
40
40
40
40
40
40
40
2
2
5
5
5
2
5
2
Energy Controls
T100 Series
Specification
The time switch shall be of the 24-Hour dial type, capable of permitting up to 12 ON/OFF operations each day. The time switch shall provide a minimum ON/OFF time of 1 hour. The time switch shall be powered by ____________ (125)(208-
277) VAC,_________ (50)(60) Hz power supply. The time switch motor shall be a synchronous motor, which shall be designed to withstand a minimum of 6000 volt transients. The time switch motor shall be connected to the supply terminals with ring-type connectors and shall not require more than 3 Watts to operate the time switch. The time switch mechanism shall be a snap-in design to provide ease of mechanism removal from the enclosure. The time switch enclosure shall be a _______________(Type 1 steel)(Type 3R steel)(Type 3R plastic with see through cover) lockable enclosure. The time switch enclosure shall provide a minimum of 31 cubic inches of wiring space and provide a nonremovable cover, which shall swing open a full 180 degrees. The time switch shall provide clear terminal identification on a see-through non-curling terminal insulator. A visual indicator shall be provided in the time switch for inspecting clock motor operation. The time switch contact blades shall be a one piece design with welded silver alloy contacts and shall be designed to provide wiping action on contacts during operation to ensure reliable load switching. Terminal connections shall be made using teeter-type terminal screws to provide secure connections for wire sizes up to #8 AWG.
Switch configuration shall be ______________ (SPST)(DPST) (1NO/1NC) with a switch rating each pole:
• 40 Amp Resistive, 120-480 VAC
• 40 Amp Tungsten, Inductive or 1000 VA Pilot Duty each pole, 120-277 VAC
• 2 HP (24 FLA), 120 VAC
• 5 HP (28 FLA), 240 VAC
The time switch shall be Agency Listed under Clock Operated Switches and shall be Intermatic model ________________
(See Model Numbers Listed).
Diagrams
Equipment
Ground
Neutral
120 VAC
Input
Line
Clock
Motor
A 1 2
Model T101 SPST
To Load
Equipment
Ground
Clock
Motor
A 1 2
*277V
**208V, 240V
Neutral*/Line 2**
208-277 VAC
Input
Line 1
Model T102 SPST
To Load
Equipment
Ground
Neutral
Clock
Motor
A 1 2 3 4
Line 1
Model T103 DPST
Typical Wiring Diagram Jumper
To
Loads
Equipment
Ground
Clock
Motor
A 1 2 3 4
208-277
VAC Input
Neutral*/Line 1**
Line 2
*277VAC
**208, 240VAC
Model T104 DPST
To
Load
Equipment
Ground
Clock
Motor
Equipment
Ground
Clock
Motor
A 1 2 3 4 A 1 2 3 4
120 VAC
Input
Neutral
Line
To N.0.
Load
Model T105 (1 NO/1NC)
Jumper
See Note 3
NOTES:
1. For Single Pole Normally Open Operation - See Diagram
2. For Single Pole Normally Closed operation - move motor lead from Terminal 3 to Terminal 2. Connect LINE to Terminal 2 and LOAD to Terminal 1.
3. For Single Pole Double Throw operation - install JUMPER between Terminals 2 and 3; Connect LINE to Terminal 2; N.O. LOAD to Terminal 4 and N.C. LOAD to Terminal 1.
Connect COMMON to Terminal A.
208-277 VAC
Input
*277 VAC
**208, 240 VAC
Neutral*/Line 1**
Line 2
To N.0.
Load
Model T106R (1 NO/1NC)
Jumper
See Note 3
NOTES:
1. For Single Pole Normally Open Operation - See Diagram
2. For Single Pole Normally Closed operation - move motor lead from Terminal 3 to Terminal 2. Connect LINE to Terminal 2 and LOAD to Terminal 1.
3. For Single Pole Double Throw operation - install JUMPER between Terminals 2 and 3; Connect LINE to Terminal 2; N.O. LOAD to Terminal 4 and N.C. LOAD to Terminal 1.
Connect COMMON to Terminal A.
5"
[12.70 cm]
Type 1 Steel
Energy Controls
7 ¾"
[19.69 cm]
3"
[7.62 cm]
9 3 ⁄
8
"
[23.81 cm]
5 ½"
[13.97 cm]
Type 3R Steel
3 5 ⁄
8
"
[9.21 cm] www.intermatic.com
5 ½"
[13.97 cm]
Type 3R Plastic
9 3 ⁄
8
"
[23.81 cm]
4" [10.16 cm]
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project