PowerLite® 700U
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User’s Guide.
Wired network
Camera, USB device, or document camera
Connect the projector to your network using an Ethernet cable. See “Project over
a network” for more information.
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07
document camera to the projector’s USB-A (flat) port.
Connect the projector
4
If you don’t see an image, press the Source Search button on the
remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
5
If you need to focus the image, first slide the switch on the side of the
projector to open the air filter cover. Then raise or lower the focus lever
to sharpen the image.
6
se the arrow buttons on the remote control to highlight any of the
U
options on the Home screen, then press
. to select it. You can display
a QR code, switch between projection sources, and quickly access various
adjustment options from this screen.
7
he default language of the menu system is English. To select another
T
language, press the Menu button on the remote control. Select
Extended and press
. Select Language and press
. Select your
language and press
. Press the Menu button to exit the menu system.
USB cable
Before you can connect to the projector, you need to remove the screws and
the cable cover.
Note: To connect the projector to a wireless network, you must install the
optional Epson Wireless LAN Module (ELPAP10). To purchase the Epson
Wireless LAN Module or other accessories, see “Optional accessories.” For more
information, see the online User’s Guide.
Microphone
Connect a dynamic microphone to the Mic port, using a 3.5 mm mini-jack cable.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s PC Free feature. You can also connect other Epson document
cameras to the projector. See the online User’s Guide for details.
Using the remote control
Install the batteries as shown (two AA batteries).
Computer
Choose from the following connections. See the sections below or the online
User’s Guide for details.
USB cable
Video device
HDMI cable
Connect multiple video devices and use the Source Search button on the
projector or remote control to switch between them. For more information on
playing sound through the projector, see the online User’s Guide.
RCA video cable
(composite video)
Component video
to VGA cable
HDMI cable
Turn projector on
and off
Choose which source
to display
Audio cable
VGA cable
HDMI port
Access projector menus
Navigate projector
menus
Connect one end of an HDMI cable to one of the projector’s HDMI ports and
the other end to an HDMI port on your computer.
Change presentation
slides (USB only)
Computer port
Connect one end of a VGA cable to the projector’s Computer port, and the
other end to your computer’s
monitor port. If you are using a laptop,
switch it to external display (see “Troubleshooting”). You can also connect an
audio cable.
Turn off projector
display and sound
Control projector
volume
Wired network
configuration
Access the Home
screen
Follow the steps here to configure your projector for your wired network
using the projector’s menu system.
USB port
Connect the square end of a USB cable to the projector’s USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows® Vista or later: After turning on the projector, follow
the on-screen instructions to install the Epson® USB Display software
(EMP_UDSE.EXE; only on first connection). If the software screen does not
display automatically, open My Computer, Computer, or This PC, then
double-click EPSON_PJ_UD.
OS X 10.7.x or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
External monitor and speakers
You can connect an external monitor and external speakers to your projector
to enhance your presentations. See the online User’s Guide for details.
For more information on using the remote control, see the online User’s Guide.
Mobile media device
Connect tablets, smartphones, and other devices that support the MHL™
standard to the HDMI 1/MHL port.
Turn on your equipment
1
2
Note: To connect the projector to a wireless network, you need the optional
wireless LAN module (part number ELPAP10). For more information about
using the projector on a network, see the online User’s Guide.
1 Press the Menu button on the remote control, select the Network
menu, then press
.
Turn on your computer or video source.
ake sure the power cord is connected and plugged into an
M
electrical outlet.
MHL cable
Streaming device
Some devices may require an adapter or may not require an MHL cable. Not all
features or functions may be supported. Check your device’s documentation for
more information.
2
3
3
Press the
power button on the projector or remote control. The
projector beeps, and the Status light flashes blue and then stays on.
Note: To shut down the projector, press the
power button twice.
Choose Network Configuration and press
Select the Wired LAN menu and press
.
.
PowerLite® 700U
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User’s Guide.
Wired network
Camera, USB device, or document camera
Connect the projector to your network using an Ethernet cable. See “Project over
a network” for more information.
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07
document camera to the projector’s USB-A (flat) port.
Connect the projector
4
If you don’t see an image, press the Source Search button on the
remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
5
If you need to focus the image, first slide the switch on the side of the
projector to open the air filter cover. Then raise or lower the focus lever
to sharpen the image.
6
se the arrow buttons on the remote control to highlight any of the
U
options on the Home screen, then press
. to select it. You can display
a QR code, switch between projection sources, and quickly access various
adjustment options from this screen.
7
he default language of the menu system is English. To select another
T
language, press the Menu button on the remote control. Select
Extended and press
. Select Language and press
. Select your
language and press
. Press the Menu button to exit the menu system.
USB cable
Before you can connect to the projector, you need to remove the screws and
the cable cover.
Note: To connect the projector to a wireless network, you must install the
optional Epson Wireless LAN Module (ELPAP10). To purchase the Epson
Wireless LAN Module or other accessories, see “Optional accessories.” For more
information, see the online User’s Guide.
Microphone
Connect a dynamic microphone to the Mic port, using a 3.5 mm mini-jack cable.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s PC Free feature. You can also connect other Epson document
cameras to the projector. See the online User’s Guide for details.
Using the remote control
Install the batteries as shown (two AA batteries).
Computer
Choose from the following connections. See the sections below or the online
User’s Guide for details.
USB cable
Video device
HDMI cable
Connect multiple video devices and use the Source Search button on the
projector or remote control to switch between them. For more information on
playing sound through the projector, see the online User’s Guide.
RCA video cable
(composite video)
Component video
to VGA cable
HDMI cable
Turn projector on
and off
Choose which source
to display
Audio cable
VGA cable
HDMI port
Access projector menus
Navigate projector
menus
Connect one end of an HDMI cable to one of the projector’s HDMI ports and
the other end to an HDMI port on your computer.
Change presentation
slides (USB only)
Computer port
Connect one end of a VGA cable to the projector’s Computer port, and the
other end to your computer’s
monitor port. If you are using a laptop,
switch it to external display (see “Troubleshooting”). You can also connect an
audio cable.
Turn off projector
display and sound
Control projector
volume
Wired network
configuration
Access the Home
screen
Follow the steps here to configure your projector for your wired network
using the projector’s menu system.
USB port
Connect the square end of a USB cable to the projector’s USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows® Vista or later: After turning on the projector, follow
the on-screen instructions to install the Epson® USB Display software
(EMP_UDSE.EXE; only on first connection). If the software screen does not
display automatically, open My Computer, Computer, or This PC, then
double-click EPSON_PJ_UD.
OS X 10.7.x or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
External monitor and speakers
You can connect an external monitor and external speakers to your projector
to enhance your presentations. See the online User’s Guide for details.
For more information on using the remote control, see the online User’s Guide.
Mobile media device
Connect tablets, smartphones, and other devices that support the MHL™
standard to the HDMI 1/MHL port.
Turn on your equipment
1
2
Note: To connect the projector to a wireless network, you need the optional
wireless LAN module (part number ELPAP10). For more information about
using the projector on a network, see the online User’s Guide.
1 Press the Menu button on the remote control, select the Network
menu, then press
.
Turn on your computer or video source.
ake sure the power cord is connected and plugged into an
M
electrical outlet.
MHL cable
Streaming device
Some devices may require an adapter or may not require an MHL cable. Not all
features or functions may be supported. Check your device’s documentation for
more information.
2
3
3
Press the
power button on the projector or remote control. The
projector beeps, and the Status light flashes blue and then stays on.
Note: To shut down the projector, press the
power button twice.
Choose Network Configuration and press
Select the Wired LAN menu and press
.
.
4
5
Choose IP Settings and press
.
If your network assigns addresses automatically, make sure the DHCP
setting is on. If not, make sure DHCP is off and enter the projector’s
IP Address, Subnet Mask, and Gateway Address, as needed. Then
press Esc.
6
hen you are finished, select Complete and press
W
again to save your settings.
7
Press the Menu button to exit the menu system.
, then press
Projecting from a mobile
device
You can project wirelessly from a mobile device (iOS, Android™, or
Chromebook™) using the Epson iProjection™ app and a QR code.
1
se the following QR code to download and install the Epson iProjection
U
app.
To monitor and control your projector over the network, download and
install the Epson Projector Management software (Windows only) and
manual from your product’s support page (see “Where to get help”).
Project over a network
If you need to configure the projector for a wired network, see “Wired
network configuration” on the front of this sheet.
1
If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
••
••
••
Install the optional software
Download the Epson iProjection™ software and manual from your product’s
support page (see “Where to get help”) and install the program on each
computer that will project over the network.
Troubleshooting
••
2
If you connected the projector to a network wirelessly, make sure to
connect your mobile device to the same network.
3
Press the LAN button on the remote control to display a QR code on the
projector screen.
4
5
Start Epson iProjection on your mobile device.
Use the QR code reader feature to read the QR code displayed.
••
••
Make sure the Status light on the projector is blue and not flashing.
P
ress the Source Search button on the projector or the remote control to
switch to the correct image source, if necessary.
Press the Home button on the projector or remote control to verify the
source input and settings.
O
n Windows® 7 or later, hold down the Windows key and press P at the
same time, then click Duplicate.
If you’re using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
. You may have to hold down the
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
If you’re using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror Displays
check box.
Where to get help
Press the LAN button on the remote control. You see this screen:
Manuals
For more information about using the projector, see the online manuals. You
can view or download the manuals from the Epson website, as described below.
2
Start Epson iProjection on your computer.
Windows 10: Select
X.XX.
> EPSON Projector > Epson iProjection Ver
indows 8.x: Navigate to the Apps screen and select Epson
W
iProjection Ver. X.XX.
ther versions of Windows: Select
O
or Start > Programs or
All Programs > EPSON Projector > Epson iProjection > Epson
iProjection Ver X.XX.
S X: Double-click the Epson iProjection icon in the Applications
O
folder.
3
4
Follow the app instructions to connect your device to the projector.
For more information on setting up and using this app, visit
www.epson.com/projectorapp (U.S.) or www.epson.ca/projectorapp
(Canada).
Using web remote
You can use a standard web browser to control the projector through the
network. A “virtual remote control” on your computer screen lets you perform
many of the same functions as you can with the physical remote control.
1
Select Advanced Connection Mode and click OK.
pen your web browser and enter the IP address of the projector you
O
want to monitor in the browser window.
If you’re not sure what the IP address of the projector is, turn the
projector on and select Net. Info. - Wired LAN or Net. Info. - Wireless
LAN from the Network menu to display the IP address of the projector.
(Do not enter the leading zeroes.)
2
Enter EPSONWEB as the default user name and admin as the default
password, then click OK.
3
F rom the Projector Control menu, select Web Remote. Use the on-screen
buttons to operate the projector, as you would using the remote control.
Select equipment connected
to an HDMI port
Select the projector you want to connect to, then click Join.
If you don’t see the projector you want, click the Automatic search
button to find the projector automatically, click the Manual search
button to enter the projector’s IP address, or click the Profile button
to find the projector based on a previously saved profile.
5
6
If you see a message asking for a keyword, enter the four digits that
appear on the LAN standby screen and click OK.
Select video signal
Select wired or wireless
network signal
Internet support services
Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada)
and search for your product to download software and utilities, view manuals,
get FAQs and troubleshooting advice, or contact Epson.
Telephone support
To use the Epson PrivateLine® Support service, call (800) 637-7661. This service
is available for the duration of your warranty period. You may also speak with
a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and
7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to
change without notice. Toll or long distance charges may apply.
Registration
Register today to get product updates and exclusive offers. You can register
online at www.epson.com/webreg.
Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase screens or other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you
can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca
(Canadian sales).
Select equipment connected
to a USB port
Select USB display signal
Pause video
Turn off picture
and sound
Your computer image is projected, with a floating toolbar:
EPSON and PowerLite are registered trademarks, Epson iProjection is a trademark, and EPSON Exceed Your Vision
is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.
When you’re done presenting, click Disconnect All on the toolbar.
Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
Android is a trademark of Google Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2017 Epson America, Inc., 8/17
Printed in XXXXXX
CPD-54285
4
5
Choose IP Settings and press
.
If your network assigns addresses automatically, make sure the DHCP
setting is on. If not, make sure DHCP is off and enter the projector’s
IP Address, Subnet Mask, and Gateway Address, as needed. Then
press Esc.
6
When you are finished, select Complete and press
again to save your settings.
7
Press the Menu button to exit the menu system.
, then press
Projecting from a mobile
device
Troubleshooting
You can project wirelessly from a mobile device (iOS, Android™, or
Chromebook™) using the Epson iProjection™ app and a QR code.
••
••
1
Use the following QR code to download and install the Epson iProjection
app.
••
Install the optional software
Download the Epson iProjection™ software and manual from your product’s
support page (see “Where to get help”) and install the program on each
computer that will project over the network.
To monitor and control your projector over the network, download and
install the Epson Projector Management software (Windows only) and
manual from your product’s support page (see “Where to get help”).
Project over a network
If you need to configure the projector for a wired network, see “Wired
network configuration” on the front of this sheet.
1
If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
••
2
If you connected the projector to a network wirelessly, make sure to
connect your mobile device to the same network.
3
Press the LAN button on the remote control to display a QR code on the
projector screen.
4
5
Start Epson iProjection on your mobile device.
Use the QR code reader feature to read the QR code displayed.
••
••
Make sure the Status light on the projector is blue and not flashing.
P
ress the Source Search button on the projector or the remote control to
switch to the correct image source, if necessary.
Press the Home button on the projector or remote control to verify the
source input and settings.
O
n Windows® 7 or later, hold down the Windows key and press P at the
same time, then click Duplicate.
If you’re using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
. You may have to hold down the
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
If you’re using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror Displays
check box.
Where to get help
Press the LAN button on the remote control. You see this screen:
Manuals
For more information about using the projector, see the online manuals. You
can view or download the manuals from the Epson website, as described below.
2
Start Epson iProjection on your computer.
Windows 10: Select
X.XX.
> EPSON Projector > Epson iProjection Ver
Windows 8.x: Navigate to the Apps screen and select Epson
iProjection Ver. X.XX.
Other versions of Windows: Select
or Start > Programs or
All Programs > EPSON Projector > Epson iProjection > Epson
iProjection Ver X.XX.
OS X: Double-click the Epson iProjection icon in the Applications
folder.
3
4
Follow the app instructions to connect your device to the projector.
For more information on setting up and using this app, visit
www.epson.com/projectorapp (U.S.) or www.epson.ca/projectorapp
(Canada).
Using web remote
You can use a standard web browser to control the projector through the
network. A “virtual remote control” on your computer screen lets you perform
many of the same functions as you can with the physical remote control.
1
Select Advanced Connection Mode and click OK.
Open your web browser and enter the IP address of the projector you
want to monitor in the browser window.
If you’re not sure what the IP address of the projector is, turn the
projector on and select Net. Info. - Wired LAN or Net. Info. - Wireless
LAN from the Network menu to display the IP address of the projector.
(Do not enter the leading zeroes.)
2
Enter EPSONWEB as the default user name and admin as the default
password, then click OK.
3
From the Projector Control menu, select Web Remote. Use the on-screen
buttons to operate the projector, as you would using the remote control.
Select equipment connected
to an HDMI port
Select the projector you want to connect to, then click Join.
If you don’t see the projector you want, click the Automatic search
button to find the projector automatically, click the Manual search
button to enter the projector’s IP address, or click the Profile button
to find the projector based on a previously saved profile.
5
6
If you see a message asking for a keyword, enter the four digits that
appear on the LAN standby screen and click OK.
Select video signal
Select wired or wireless
network signal
Internet support services
Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada)
and search for your product to download software and utilities, view manuals,
get FAQs and troubleshooting advice, or contact Epson.
Telephone support
To use the Epson PrivateLine® Support service, call (800) 637-7661. This service
is available for the duration of your warranty period. You may also speak with
a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and
7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to
change without notice. Toll or long distance charges may apply.
Registration
Register today to get product updates and exclusive offers. You can register
online at www.epson.com/webreg.
Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase screens or other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you
can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca
(Canadian sales).
Select equipment connected
to a USB port
Select USB display signal
Pause video
Turn off picture
and sound
Your computer image is projected, with a floating toolbar:
EPSON and PowerLite are registered trademarks, Epson iProjection is a trademark, and EPSON Exceed Your Vision
is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.
When you’re done presenting, click Disconnect All on the toolbar.
Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
Android is a trademark of Google Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. Epson disclaims any and all rights in those marks.
CPD-54285
Download PDF
Similar pages