Copy of HEM-7300-WE_main.book

Copy of HEM-7300-WE_main.book Page 1 Friday, October 3, 2008 12:50 PM
\
Digital Automatic Blood Pressure Monitor
Model MIT Elite
• Instruction Manual
• Mode d’emploi
• Gebrauchsanweisung
• Manuale di istruzioni
• Manual de instrucciones
• Gebruiksaanwijzing
• РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
EN
FR
DE
IT
ES
NL
RU
AR
IM-HEM-7300-WE-01-10/08
5322169-0A
Copy of HEM-7300-WE_main.book Page 2 Friday, October 3, 2008 12:50 PM
Contents
Before using the unit
Introduction ................................................................................ 3
Important Safety Information .................................................... 4
1. Overview ............................................................................... 6
2. Preparation ......................................................................... 10
2.1 Installing/Replacing the Batteries.................................... 10
2.2 Setting the Date and Time .............................................. 12
Operating instructions
3. Using the Unit..................................................................... 15
3.1 How to Sit Correctly When Taking a Measurement ........ 15
3.2 Applying the Arm Cuff ..................................................... 17
3.3 Taking a Reading............................................................ 20
3.4 Using the Memory Function ............................................ 25
4. Quick Reference Guide ..................................................... 29
Care and maintenance
5. Handling Errors and Problems ......................................... 30
5.1 Error Messages............................................................... 30
5.2 Troubleshooting .............................................................. 32
6. Maintenance and Storage ................................................. 34
7. Optional Parts .................................................................... 36
8. Technical Data.................................................................... 37
9. Some Useful Information about Blood Pressure ............ 39
2
Copy of HEM-7300-WE_main.book Page 3 Friday, October 3, 2008 12:50 PM
Before using the unit
Introduction
Thank you for purchasing the OMRON MIT Elite Upper Arm Blood
Pressure Monitor.
The OMRON MIT Elite is a fully automatic blood pressure monitor,
operating on the oscillometric principle. It measures your blood
pressure and pulse rate simply and quickly. For comfortable controlled
inflation without the need for pressure pre-setting or re-inflation the
device uses its advanced “IntelliSense” technology.
The unit also stores up to 90 measurements in memory and calculates
an average reading based on the three most recent measurements
taken within 10 minutes of the last reading.
Please read this instruction manual thoroughly before
using the unit. For specific information about your own
blood pressure, CONSULT YOUR DOCTOR.
EN
3
Copy of HEM-7300-WE_main.book Page 4 Friday, October 3, 2008 12:50 PM
Important Safety Information
Important Safety Information
Consult your doctor during pregnancy, arrhythmia and arteriosclerosis. Please
read this section carefully before using the unit.
Warning:
Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
(General Usage)
• Always consult your doctor. Self-diagnosis of measurement results and selftreatment are dangerous.
• People with severe blood flow problems, or blood disorders, should consult a
doctor before using the unit. Cuff inflation can cause internal bleeding.
(Battery Usage)
• If battery fluid should get in your eyes, immediately rinse with plenty of clean
water. Consult a doctor immediately.
(Optional AC Adapter Usage)
• Never plug in or unplug the power cord from the electric outlet with wet
hands.
Caution:
Indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury to the user or patient or damage to the equipment or
other property.
(General Usage)
• Do not leave the unit unattended with infants or persons who cannot express
their consent.
• Do not use the unit for any purpose other than measuring blood pressure.
• Do not disassemble the unit or arm cuff.
• Do not inflate the arm cuff over 299 mmHg.
• Do not use a mobile phone, or other devices that emit electromagnetic fields,
near the unit. This may result in incorrect operation of the unit.
• Do not operate unit in a moving vehicle (car, airplane).
(Optional AC Adapter Usage)
• Use only the original AC adapter designed for this unit. Use of unsupported
adapters may damage and/or may be hazardous to the unit.
• Plug the AC adapter into the appropriate voltage outlet.
4
Copy of HEM-7300-WE_main.book Page 5 Friday, October 3, 2008 12:50 PM
Important Safety Information
• Do not use the AC adapter if the unit or the power cord is damaged. Turn off
the power and unplug the power cord immediately.
(Battery Usage)
• If battery fluid should get on your skin or clothing, immediately rinse with
plenty of clean water.
• Use only four “AAA” alkaline batteries with this unit. Do not use other types of
batteries.
• Do not insert the batteries with their polarities incorrectly aligned.
• Replace old batteries with new ones immediately. Replace all four batteries at
the same time.
• Remove the batteries if the unit will not be used for three months or more.
• When the batteries are replaced, you may need to reset the date and time. If
the year is flashing on the display screen, refer to “2.2 Setting the Date and
Time”.
• Do not use new and used batteries together.
General Safety Precautions
• Do not inflate the arm cuff when it is not wrapped around your arm.
• Do not apply strong shocks and vibrations to or drop the unit.
• Do not take measurements after bathing, drinking alcohol, smoking,
exercising or eating.
• Do not wash the arm cuff or immerse it in water.
• Read and follow the “Important information regarding Electro Magnetic
Compatibility (EMC)” in the Technical Data Section.
• Read and follow the “Correct Disposal of This Product” in the Technical Data
Section when disposing of the device and any used accessories or optional
parts.
Save these instructions for future reference.
5
EN
Copy of HEM-7300-WE_main.book Page 6 Friday, October 3, 2008 12:50 PM
1.Overview
1. Overview
Main unit
F
A
B
E
D
C
G
A.
B.
C.
D.
E.
6
Air jack
Date/time setting button ( )
O/I START button
Memory button ( )
AC adapter jack (for optional AC
adapter)
F. Display
G. Battery compartment
Copy of HEM-7300-WE_main.book Page 7 Friday, October 3, 2008 12:50 PM
1.Overview
Arm Cuff
H
I
J
H. Arm cuff
(Medium cuff: arm circumference 22-32 cm)
I. Air tube
J. Air plug
EN
7
Copy of HEM-7300-WE_main.book Page 8 Friday, October 3, 2008 12:50 PM
1.Overview
Display
K
L
M
O
Q
P
T
R
V
K. Systolic blood pressure
L. Diastolic blood pressure
M. Heartbeat symbol
1. Flashes during measurement
2. If flashing after measurement
complete indicates blood
pressure out of recommended
range
N. Deflation symbol
O. Memory symbol
Displayed when viewing values
stored in memory
P. Average value symbol
Displayed when viewing value for
the last three measurements
Q. Battery low symbol
R. Movement error symbol
Displayed if you move your body
during the measurement
8
S
N
S.
T.
U.
V.
U
Pulse display
Date/Time display
Irregular heartbeat symbol
Guest symbol
Copy of HEM-7300-WE_main.book Page 9 Friday, October 3, 2008 12:50 PM
1.Overview
Package contents
W
W. Storage case
X. Four “AAA” alkaline (LR03)
batteries
X
• Instruction manual
• Guarantee card
• Blood pressure pass
EN
9
Copy of HEM-7300-WE_main.book Page 10 Friday, October 3, 2008 12:50 PM
2.Preparation
2. Preparation
2.1
Installing/Replacing the Batteries
1. Turn the main unit upside down.
2. Slide the battery cover in the
direction of the arrow while
pressing the ribbed part of the
cover.
3. Install or replace four “AAA” size
batteries so that the + (positive)
and - (negative) polarities match
the polarities indicated on the
battery compartment.
4. Put the battery cover back in
place.
Slide the battery cover as
indicated, until it clicks into
place.
Note: The measurement values continue to be stored in
memory even after the batteries are replaced.
10
Copy of HEM-7300-WE_main.book Page 11 Friday, October 3, 2008 12:50 PM
2.Preparation
Battery Life & Replacement
If the battery low symbol ( ) appears on the display, replace all four
batteries at the same time.
- When the battery low symbol ( ) starts to blink, you will still be
able to use the unit for a short while. You should replace the
batteries with new ones ahead of time.
- When the symbol ( ) remains lit, the batteries are exhausted. You
should replace the batteries with new ones at once. Turn the unit off
before replacing the batteries.
• Remove the batteries if the unit will not be used for three months or
more.
• If the batteries have been removed for more than 30 seconds, the
Date/Time setting will need to be reset. See “2.2 Setting the Date and
Time” for details.
• Dispose of batteries according to applicable local regulations.
Four new “AAA” alkaline batteries will last for approximately 300
measurements, when used to take three measurements a day.
Since the supplied batteries are for monitoring use only, they may have
a shorter life and not last for 300 measurements.
11
EN
Copy of HEM-7300-WE_main.book Page 12 Friday, October 3, 2008 12:50 PM
2.Preparation
2.2
Setting the Date and Time
Your blood pressure monitor automatically stores up to 90
measurements values with the date and time. To make use of the
memory and average values functions:
• Set the unit to the correct date and time before taking a measurement
for the first time.
• If the batteries have been removed for more than 30 seconds, the
Date/Time setting will need to be set.
1. Press and hold the Date/time setting
button ( ) to adjust the date and
time. The year digits (2008) will flash
on the display.
2. Press the Memory button (
) to
advance the digits one at a time.
Notes:
• The range for the year setting is
2008 to 2030. If the year reaches
2030, it will return to 2008.
• If you hold down the Memory
button ( ), the digits will advance
rapidly.
12
Copy of HEM-7300-WE_main.book Page 13 Friday, October 3, 2008 12:50 PM
2.Preparation
3. Press the Date/time setting button
( ) to confirm the setting when the
desired number appears on the
display.
The year is set and the month digits
flash on the display.
4. Repeat steps 2 and 3 to set the
month.
The month is set and the day digits
flash on the display.
EN
5. Repeat steps 2 and 3 to set the day.
The day is set and the hour digits
flash on the display.
13
Copy of HEM-7300-WE_main.book Page 14 Friday, October 3, 2008 12:50 PM
2.Preparation
6. Repeat steps 2 and 3 to set the
hour.
The hour is set and the minutes
digits flash on the display.
7. Repeat steps 2 and 3 to set the minutes.
The minutes settings is set.
Press the Date/time setting button
( ) to turn the monitor off.
When adjusting the date and time,
press the Date/time setting button
( ) to turn the monitor on, follow
the steps above, and press the O/I START button to turn the
monitor off.
14
Copy of HEM-7300-WE_main.book Page 15 Friday, October 3, 2008 12:50 PM
Operating instructions
3.Using the Unit
3. Using the Unit
3.1
How to Sit Correctly When Taking a Measurement
You can take a measurement on either your left or right arm.
Notes:
• Measurements should be taken in a quiet place and you should be in
a relaxed, seated position. Make sure that the room is not too hot or
cold.
• Avoid eating, drinking alcohol, smoking, or exercising for at least 30
minutes before taking a measurement.
• Do not move or talk during measurement.
Correct
Posture
Sit upright
with your
back straight.
Remove tight fitting clothing from
your upper arm, and any thick
clothing such as a sweater.
Do not place the cuff over thick
clothes and do not roll up your sleeve
if it is too tight.
Place your arm on a table so
that the cuff will be at the same
level as your heart.
EN
The gap between the
chair and the top of the
table should be between
25cm to 30cm.
15
Copy of HEM-7300-WE_main.book Page 16 Friday, October 3, 2008 12:50 PM
3.Using the Unit
Notes:
• Correct posture during measurement is necessary to get accurate
results.
• You should also try to measure your blood pressure at the same time
each day. (Within 1 hour after waking up is recommended.)
Incorrect Posture
• Arched back (leaning
forwards)
• Sitting cross-legged
• Sitting on a sofa or at a low
table so that you tend to lean
forward
These situations could lead to higher blood pressure values due to
strain or the arm cuff being lower than the heart.
If the arm cuff is at a lower position than your heart use cushions
etc., to adjust the height of your arm.
16
Copy of HEM-7300-WE_main.book Page 17 Friday, October 3, 2008 12:50 PM
3.Using the Unit
3.2
Applying the Arm Cuff
Notes:
• Be sure to wrap the arm cuff correctly so that you get accurate
results.
• Measurements can be taken in light clothing. However, please
remove thick clothes, such as sweaters, before taking a reading.
• You can take a measurement on either your left or right arm. The
blood pressure can differ between the right arm and the left arm and
therefore also the measured blood pressure values can be different.
Omron recommends to always use the same arm for measurement. If
the values between the two arms differ substantially, please check
with your doctor which arm to use for your measurement.
Taking measurements on the left arm
1. Insert the air plug into the air
jack on the left side of the main
unit.
EN
17
Copy of HEM-7300-WE_main.book Page 18 Friday, October 3, 2008 12:50 PM
3.Using the Unit
2. Put your left arm through the cuff
loop.
Note: If the cuff is not assembled,
pass the end of the cuff
furthest from the tubing
through the metal D-ring to
form a loop. The smooth cloth
should be on the inside of the
cuff loop.
18
Copy of HEM-7300-WE_main.book Page 19 Friday, October 3, 2008 12:50 PM
3.Using the Unit
3. Position the arm correctly.
1) The air tube should run
down the inside of your
forearm and be in line with
your middle finger.
2) The bottom of the cuff
should be approximately 1
to 2 cm above your elbow.
3) Apply the cuff to your
upper arm so that the
coloured marker (blue
arrow under tube) is
centred on the middle of
your inner arm and points
down the inside of the
arm.
Taking measurements on the right arm
Apply the cuff so that the
air tube is at the side of
your elbow.
• Be careful not to rest
your arm on the air tube,
or otherwise restrict the
flow of air to the cuff.
• The cuff should be 1 to
2 cm above the elbow.
EN
1 to 2 cm
4. When the cuff is positioned correctly, close the fabric fastener
FIRMLY.
19
Copy of HEM-7300-WE_main.book Page 20 Friday, October 3, 2008 12:50 PM
3.Using the Unit
3.3
Taking a Reading
1. Press the O/I START button to turn on the unit.
All symbols appear on the display.
The cuff starts to inflate automatically. As the cuff inflates, the
unit automatically determines your ideal inflation level. This unit
detects the pulse during inflation. Do not move your arm and
remain still until the entire measurement process is completed.
Note: To stop the inflation or measurement, press and release
the O/I START button. The unit will stop inflating, start
deflation and will turn off.
2. When the measurement is complete, the arm
cuff completely deflates. Your blood pressure
and pulse rate are displayed.
20
Copy of HEM-7300-WE_main.book Page 21 Friday, October 3, 2008 12:50 PM
3.Using the Unit
3. Press the O/I START button to turn
the unit off.
Note: If you forget to turn the
monitor off, it will
automatically turn off after
two minutes.
Notes:
• Self-diagnosis of measured results and treatment are dangerous.
Please follow the instructions of your doctor.
• Wait 2-3 minutes before taking another blood pressure measurement.
Waiting between readings allows the arteries to return to the condition
prior to taking the blood pressure measurement.
EN
21
Copy of HEM-7300-WE_main.book Page 22 Friday, October 3, 2008 12:50 PM
3.Using the Unit
Using the Guest Mode
The monitor stores measurement values for one user in the memory.
The guest mode can be used to take a single measurement for another
user.
No measurement values are stored in the memory when the guest
mode is selected.
1. Press and hold the O/I START button for 3 seconds.
The Guest symbol (
the display.
) appears on
2. Release the O/I START button.
The cuff starts to inflate automatically.
Note: To stop the inflation, press the O/I START button. The
monitor will stop inflating, start deflating and turn off.
3. Inflation stops and the measurement is started. When the
measurement is completed, your blood pressure and pulse rate
appear on the display.
22
Copy of HEM-7300-WE_main.book Page 23 Friday, October 3, 2008 12:50 PM
3.Using the Unit
Important:
• If your systolic or diastolic pressure is outside the
standard range, the heartbeat symbol will blink
when the measurement result is displayed.
Recent research suggests that the following
values can be used as a guide to high blood
pressure for measurements taken at home.
Systolic Blood Pressure
Above 135 mmHg
Diastolic Blood Pressure
Above 85 mmHg
This criteria is for home blood pressure measurement.
For professional office blood pressure measurement criteria, please
refer to Chapter 9 “Some Useful Information about Blood Pressure”.
• Your blood pressure monitor includes an irregular
heartbeat feature. Irregular heartbeats can
influence the results of the measurement. The
irregular heartbeat algorithm automatically
determines if the measurement is usable or
needs to be repeated. If the measurement results
are affected by irregular heartbeats but the result
is valid, the result is shown together with the
irregular heartbeat symbol. If the irregular
heartbeats cause the measurement to be invalid, no result is shown.
If the irregular heartbeat symbol (
) is shown after you have taken
a measurement, repeat the measurement. If the irregular heartbeat
symbol is shown frequently, please make your doctor aware of it.
23
EN
Copy of HEM-7300-WE_main.book Page 24 Friday, October 3, 2008 12:50 PM
3.Using the Unit
What is Irregular Heartbeat?
Normal Heartbeat
An irregular heartbeat is a
heartbeat rhythm that varies by
Pulse
more than 25% from the average
heartbeat rhythm detected while Blood pressure
the unit is measuring the systolic
Irregular Heartbeat
and diastolic blood pressure.
Short Long
Pulse
If such an irregular rhythm is
detected more than twice during Blood pressure
measurement, the irregular
heartbeat symbol (
) appears on the symbol when the
measurement results are displayed.
What is Arrhythmia?
A heartbeat is stimulated by electrical signals that cause the heart
to contract.
Arrhythmia is a condition where the heartbeat rhythm is abnormal
due to flaws in the bio-electrical system that drives the heartbeat.
Typical symptoms are skipped heartbeats, premature contraction,
an abnormally rapid (tachycardia) or slow (bradycardia) pulse. This
can be caused by heart disease, aging, physical predisposition,
stress, lack of sleep, fatigue etc. Arrhythmia can only be diagnosed
by a doctor through a special examination.
Whether the appearance of the irregular heartbeat symbol (
) in
the results indicates arrhythmia or not can only be determined by
an examination and diagnosis by your doctor.
Warning:
If the Irregular heartbeat symbol (
) is shown frequently, please
make your doctor aware of it. Conducting self-diagnosis and
treatment based on measurement results are dangerous. Be sure to
follow the instructions of your doctor.
24
Copy of HEM-7300-WE_main.book Page 25 Friday, October 3, 2008 12:50 PM
3.Using the Unit
3.4
Using the Memory Function
This unit has a memory capable of storing 90 sets of readings. Every
time you complete the measurement, the unit automatically stores the
blood pressure and pulse rate.
If there are three readings within 10 minutes of the last reading, the
average of the three readings is displayed.
Note: When 90 sets of readings are stored in memory, the oldest set
will be deleted to store a new set.
1. Press the Memory button (
).
If there are three readings stored in memory that were taken
within 10 minutes of the last reading, an average value for
those reading is displayed. (If there are only two readings in
memory for that period, the average will be based on two
readings. If there is only one reading in memory for that period,
that reading will be displayed as the average value.)
EN
Note: If there are no measurements
results stored in memory, the screen
to the right is displayed.
25
Copy of HEM-7300-WE_main.book Page 26 Friday, October 3, 2008 12:50 PM
3.Using the Unit
2. While the average value is
displayed, press the Memory button
( ) again.
The result from the most recent
measurement is displayed.
The date and time are
alternately displayed.
Note: If your systolic or diastolic
pressure is outside the standard
range, the heartbeat symbol will
blink when the measurement result
is displayed. Refer to section 3.3.
26
Copy of HEM-7300-WE_main.book Page 27 Friday, October 3, 2008 12:50 PM
3.Using the Unit
3. Press the Memory button (
)
repeatedly to cycle through the
previous measurement results.
Keep the button pressed down to
cycle rapidly through the previous
results.
If the irregular heartbeat symbol was
displayed at the time of a
measurement, this is displayed when that result is displayed.
4. Press the O/I START button to turn the unit off.
If you forget to turn the unit off, it will automatically shut itself off
after two minutes.
EN
27
Copy of HEM-7300-WE_main.book Page 28 Friday, October 3, 2008 12:50 PM
3.Using the Unit
To Delete All the Values Stored in Memory
You cannot delete individual stored readings, all the readings in the
unit will be deleted.
1. Press the Memory button
(
) to turn the monitor on.
2. Press the Memory button
( ) again. While holding the
Memory button ( ), press
the O/I Start button down for
approximately 5 seconds
until the digital display
appears as it does in the illustration to the right.
3. Press the O/I START button to turn the unit off.
If you forget to turn the unit off, it will automatically shut itself off
after two minutes.
Note: If the date and time are reset to a time before the most
recent measurement, the average value will be based on
any measurements taken after the date and time were
reset. However, you can still view the readings stored in
memory.
28
Copy of HEM-7300-WE_main.book Page 29 Friday, October 3, 2008 12:50 PM
4.Quick Reference Guide
4. Quick Reference Guide
If you are using this device for the first time, please read carefully
chapter 3 of this instruction manual. To help ensure a reliable reading,
avoid eating, drinking alcohol, smoking, or exercising for at least 30
minutes before taking a measurement.
Note: Remove any tight-fitting clothing from your upper arm.
1. Sit on a chair with your feet flat on the floor and place your arm on
a table so that the arm cuff will be at the same level as your heart.
2. Apply the arm cuff to your upper arm. The coloured marker
should be centred on the inside of your arm and point down the
inside of the arm, so that the air tube runs down the inside of
your forearm and is in line with your middle finger.
3. Secure the cuff around your arm using the fabric fastener strip.
EN
4. Press the O/I START button.
When measurement is complete,
the monitor displays your blood
pressure and pulse rate, and
automatically deflates the cuff.
Notes:
• Always wait at least 2-3 minutes before taking another blood
pressure measurement.
• Please note that all measurements are stored in the memory.
If different people measure with the same device make sure
that you are aware of this fact.
29
Copy of HEM-7300-WE_main.book Page 30 Friday, October 3, 2008 12:50 PM
Care and maintenance
5.Handling Errors and Problems
5. Handling Errors and Problems
5.1
Error Messages
Error Display
Blinks or appears
continuously
30
Cause
Remedy
Movement during
measurement
Repeat measurement. Remain still
and do not talk during
measurement.
Refer to section 3.3.
Air plug disconnected.
Insert the air plug securely.
Refer to section 3.2.
Arm cuff not applied
correctly.
Apply the arm cuff correctly.
Refer to section 3.2.
Clothing is interfering with
the arm cuff.
Remove any clothing interfering
with the arm cuff.
Refer to section 3.2.
Air is leaking from the arm
cuff.
Replace cuff with new one.
Refer to Chapter 7.
The arm cuff was inflated
above 299 mmHg when
inflating the cuff manually.
Remove the arm cuff and take
another measurement.
Refer to section 3.3.
Battery power is low.
Replace all four “AAA” batteries
with new ones.
Refer to section 2.1.
Copy of HEM-7300-WE_main.book Page 31 Friday, October 3, 2008 12:50 PM
5.Handling Errors and Problems
Error Display
Cause
Device error.
Remedy
Contact your OMRON retail outlet
or distributor.
Refer to Chapter 8.
Note: The irregular heartbeat symbol may also be displayed with error messages.
EN
31
Copy of HEM-7300-WE_main.book Page 32 Friday, October 3, 2008 12:50 PM
5.Handling Errors and Problems
5.2
Troubleshooting
Problem
The reading is
extremely low (or high).
Arm cuff pressure does
not rise.
Arm cuff deflates too
soon.
Cannot measure or
readings are too high.
The unit loses power
during measurement.
32
Cause
Remedy
Arm cuff not applied
correctly.
Apply the arm cuff
correctly.
Refer to section 3.2.
Movement or talking
during measurement.
Remain still and do not
talk during
measurement.
Refer to section 3.3.
Clothing is interfering
with the arm cuff.
Remove any clothing
interfering with the arm
cuff.
Refer to section 3.1.
Is the air jack securely
inserted into the main
unit?
Make sure that the air
jack is connected
securely.
Refer to section 3.2.
Air is leaking from the
arm cuff.
Replace the arm cuff
with a new one.
Refer to chapter 7.
The arm cuff is loose.
Apply the cuff correctly
so that it is firmly
wrapped around the
arm.
Refer to section 3.2.
Is the cuff wrapped
correctly around the
arm?
Attach the arm cuff
correctly.
The cuff pressure does
not rise although the
pump motor can be
heard.
Check that the air plug
is properly connected to
the unit. Push the air
plug firmly into the air
jack.
The batteries are empty.
Replace the batteries
with new ones.
Copy of HEM-7300-WE_main.book Page 33 Friday, October 3, 2008 12:50 PM
5.Handling Errors and Problems
Problem
Nothing happens when
you press the buttons.
Other problems.
Cause
Remedy
The batteries are empty.
Replace the batteries
with new ones.
The batteries have been
inserted incorrectly.
Insert the batteries with
the correct (+/ -) polarity.
Press the O/I START button and repeat
measurement.
If the problem continues, try replacing the batteries
with new ones.
If this still does not solve the problem, contact your
OMRON retail outlet or distributor.
EN
33
Copy of HEM-7300-WE_main.book Page 34 Friday, October 3, 2008 12:50 PM
6.Maintenance and Storage
6. Maintenance and Storage
Maintenance
To protect your unit from damage, please observe the following:
• Do not subject the main unit and cuff to extreme temperatures,
humidity, moisture or direct sunlight.
• Do not fold the cuff or tubing tightly.
• Do not inflate the arm cuff over 299 mmHg.
• Do not disassemble the unit.
• Do not subject the unit to strong shocks or vibrations (for example,
dropping the unit on the floor).
• Do not use volatile liquids to clean the main unit. The unit should be
cleaned with a soft, dry cloth.
• Do not wash the arm cuff or immerse it in water.
• Do not use petrol, thinners or similar solvents to clean the arm cuff.
• Use a soft, moistened cloth and soap to clean the arm cuff.
• Do not carry out repairs of any kind by yourself. If a defect occurs,
consult your OMRON retail outlet or distributor as mentioned on the
packaging.
Calibration and Service
• The accuracy of this blood pressure monitor has been carefully tested
and is designed for a long service life.
• It is generally recommended to have the unit inspected every two
years to ensure correct functioning and accuracy. Please consult your
authorised OMRON dealer or the OMRON Customer Service at the
address given on the packaging or attached literature.
Note: Inspections are normally not covered by guarantee, please
check the included guarantee card.
34
Copy of HEM-7300-WE_main.book Page 35 Friday, October 3, 2008 12:50 PM
6.Maintenance and Storage
• Do not carry out any repairs yourself. If a defect occurs or you have
doubts about the correct functioning of the device, consult your
authorised OMRON dealer or the OMRON Customer Service.
Storage
Keep the unit in its storage case when not in use.
1. Unplug the air tube from the air jack.
2. Gently fold the air tube into the arm
cuff.
Note: Do not bend the air tube
excessively.
3. Place the arm cuff and main unit in
the storage case.
EN
Do not store the unit in the following situations:
• If the unit is wet.
• Locations exposed to extreme temperatures, humidity, direct sunlight,
dust, chemicals or corrosive vapours.
• Locations exposed to vibrations, shocks or where it will be at an
angle.
35
Copy of HEM-7300-WE_main.book Page 36 Friday, October 3, 2008 12:50 PM
7.Optional Parts
7. Optional Parts
Medium Arm Cuff
Large Arm Cuff
Arm circumference 22 - 32 cm
Arm circumference 32 - 42 cm
CM1-9997578-9
CL-MIT Elite
9999358-2
Note: CL1 cuff cannot be
used for this device.
AC Adapter
Adapter-3094298-6
(Model: AC Adapter-E1600)
Note: Q Adapter-1098336-8 and
R Adapter-9997605-0
cannot be used for this
device.
Using the Optional AC Adapter
Insert batteries into the battery compartment even when using the AC
adapter.
Notes:
• Never unplug the power cord with wet hands.
• Use only the original AC adapter designed for this unit. Use of
unsupported adapters may damage the unit.
• When storing the optional AC adapter with the main unit, be
careful not to damage the main unit or cuff.
1. Insert the AC adapter plug
into the AC adapter jack on
the right side of the main unit.
2. Plug the AC adapter into an
2
1
electrical outlet.
To disconnect the AC adapter, unplug the AC adapter from the
electrical outlet first and then immediately remove the AC adapter plug
from the main unit.
36
Copy of HEM-7300-WE_main.book Page 37 Friday, October 3, 2008 12:50 PM
8.Technical Data
8. Technical Data
Product Description
Model
Display
Measurement Method
Measurement Range
Accuracy
Inflation
Deflation
Pressure Detection
Memory
Power Source
Battery life
Operating temperature/
Humidity
Storage temperature/
Humidity/Air Pressure
Console Weight
Cuff Weight
Outer Dimensions
Cuff Dimensions
Package Content
Digital Automatic Blood Pressure Monitor
OMRON MIT Elite (HEM-7300-WE)
LCD Digital Display
Oscillometric method
Pressure: 0 mmHg to 299 mmHg
Pulse: 40 to 180/min.
Pressure: ±3 mmHg
Pulse: ±5% of display reading
Fuzzy-logic controlled by electric pump
Automatic pressure release valve
Capacitive pressure sensor
90 Measurements with date and time
4 “AAA” alkaline batteries 1.5V or AC/ DC adapter
(optional, 6V = 4W)
Approximately 300 uses when used 3 times a day with new
alkaline batteries when inflated to 170mmHg at 23°C
+10°C to +40°C
Maximum: 30 to 85% RH
-20°C to +60°C
Maximum: 10 to 95% RH
700 - 1060hPa
Approximately 240g without batteries
Approximately 130g
Approximately 74 (w) mm × 30.6 (h) mm × 157 (l) mm
Approximately 146 mm × 446 mm
(Medium cuff: arm circumference 22 to 32 cm)
Medium cuff, instruction manual, storage case, battery set,
guarantee card, blood pressure pass
EN
Note: Subject to technical modification without prior notice.
== Type
TypeBB
• This device fulfils the previsions of EC directive 93/42/EEC (Medical Device Directive).
• This blood pressure monitor is designed according to the European Standard EN1060,
Non-invasive sphygmomanometers Part 1: General Requirements and Part 3:
Supplementary requirements for electromechanical blood pressure measuring
systems.
• This OMRON product is produced under the strict quality system of OMRON
Healthcare Co. Ltd., Japan. The Core component for OMRON blood pressure
monitors, which is the Pressure Sensor, is produced in Japan.
37
Copy of HEM-7300-WE_main.book Page 38 Friday, October 3, 2008 12:50 PM
8.Technical Data
Important information regarding Electro Magnetic Compatibility (EMC)
With the increased number of electronic devices such as PC’s and mobile (cellular) telephones, medical
devices in use may be susceptible to electromagnetic interference from other devices. Electromagnetic
interference may result in incorrect operation of the medical device and create a potentially unsafe
situation.
Medical devices should also not interfere with other devices.
In order to regulate the requirements for EMC (Electro Magnetic Compatibility) with the aim to prevent
unsafe product situations, the EN60601-1-2 standard has been implemented. This standard defines the
levels of immunity to electromagnetic interferences as well as maximum levels of electromagnetic
emissions for medical devices.
This medical device manufactured by OMRON Healthcare conforms to this EN60601-1-2:2001 standard
for both immunity and emissions.
Nevertheless, special precautions need to be observed:
Do not use mobile (cellular) telephones and other devices, which generate strong electrical or
electromagnetic fields, near the medical device. This may result in incorrect operation of the unit and
create a potentially unsafe situation. Recommendation is to keep a minimum distance of 7 m. Verify
correct operation of the device in case the distance is shorter.
Further documentation in accordance with EN60601-1-2:2001 is available at OMRON Healthcare Europe
at the address mentioned in this instruction manual.
Documentation is also available at www.omron-healthcare.com.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it should not be disposed of,
with other household wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
This product does not contain any hazardous substances.
Disposal of used batteries should be carried out in accordance with the national regulations for the
disposal of batteries.
38
Copy of HEM-7300-WE_main.book Page 39 Friday, October 3, 2008 12:50 PM
9.Some Useful Information about Blood Pressure
9. Some Useful Information about Blood Pressure
What is Blood Pressure?
Blood pressure is a measure of the force of blood flowing against the
walls of the arteries. Arterial blood pressure is constantly changing
during the course of the heart’s cycle.
The highest pressure in the cycle is called the Systolic Blood Pressure;
the lowest is the Diastolic Blood Pressure.
Both pressure readings, the Systolic and Diastolic, are necessary to
enable a doctor to evaluate the status of a patient’s blood pressure.
Why is it a Good Thing to measure Blood Pressure at Home?
Having your blood pressure measured by a doctor can cause anxiety
which is itself a cause of high blood pressure. As a variety of conditions
affect blood pressure, a single measurement may not be sufficient for
an accurate diagnosis.
Many factors such as physical activity, anxiety, or the time of day, can
influence your blood pressure. Thus it is best to try and measure your
blood pressure at the same time each day, to get an accurate
indication of any changes in blood pressure. Blood pressure is typically
low in the morning and increases from afternoon to evening. It is lower
in the summer and higher in the winter.
Blood pressure is measured in millimetres of mercury (mmHg) and
measurements are written with the systolic pressure before the
diastolic e.g. A blood pressure written as 135/85, is referred to as 135
over 85 mmHg.
39
EN
Copy of HEM-7300-WE_main.book Page 40 Friday, October 3, 2008 12:50 PM
9.Some Useful Information about Blood Pressure
Upper curve: systolic blood pressure
Lower curve: diastolic blood pressure
200
mmHg
150
100
50
6
12
18
24
Time of day
Example: fluctuation within a day (male, 35 years old)
Classification of Blood Pressure by the World Heath Organization
The World Health Organization (WHO) and the International Society of
Hypertension (ISH) developed the Blood Pressure Classification
shown in this figure.
Systolic blood pressure
(mmHg)
Severe hypertension
180
Moderate hypertension
160
Mild hypertension
140
Normal systolic value
130
120
Normal blood
pressure
Optimal blood
pressure
(target value)
80
85
90
100 110
Diastolic
blood
pressure
(mmHg)
This classification is based on the blood pressure values measured on
people in a sitting position in outpatient departments of hospitals.
* There is no universally accepted definition of hypotension. However,
those having the systolic pressure below 100 mmHg are assumed as
hypotensive.
40
Copy of HEM-7300-WE_main.book Page 41 Friday, October 3, 2008 12:50 PM
9.Some Useful Information about Blood Pressure
EN
41
Copy of HEM-7300-WE_main.book Page 42 Friday, October 3, 2008 12:50 PM
9.Some Useful Information about Blood Pressure
Manufacturer
OMRON HEALTHCARE CO., LTD.
24, Yamanouchi Yamanoshita-cho, Ukyo-ku,
Kyoto, 615-0084, Japan
EU-representative
OMRON HEALTHCARE EUROPE B.V.
Kruisweg 577, 2132 NA Hoofddorp,
The Netherlands
www.omron-healthcare.com
Production Facility
EC
REP
OMRON DALIAN CO., LTD.
Economic & Technical Development Zone
Dalian 116600, China
OMRON HEALTHCARE UK LTD.
Opal Drive
Fox Milne, Milton Keynes MK15 0DG, United Kingdom
Subsidiary
OMRON Medizintechnik Handelsgesellschaft mbH
John-Deere-Str. 81a, 68163 Mannheim, Germany
www.omron-medizintechnik.de
OMRON SANTÉ FRANCE SAS
14, rue de Lisbonne, 93561 Rosny-sous-Bois Cedex, France
Made in China
42
Download PDF
Similar pages