GVA22FLEDA – 21.5″ (54cm) FHD LED LCD TV

21.5” (54cm) FHD LED LCD TV
/ GVA22FLEDA
Instruction Manual
Contents
Preface
3
Safety Precautions
3
In the carton
5
Front Back Connections of LED
6
TV Installation Drawings
7
Power Cord Connection
7
Antennas Connection
7
HDMI Connection
8
VGA Connection
8
COAX Connection
9
USB Connection
9
AV Connection
10
YPbPr Connection
10
Remote Control
11
Remote Control Instructions in TV/Media mode
11
Remote Control Setup
13
Menu Operation
14
Installation Guide
14
CHANNEL Menu
14
PICTURE Menu
17
SOUND Menu
19
TIME Menu
20
OPTION Menu
21
LOCK Menu
22
Hotel Setting
23
Input Source
24
EPG and Channel List Menu
25
Multimedia (Media) Menu
26
PVR Menu
32
Troubleshooting and Advise
28
Specifications
39
3
Preface
1.PREFACE
ThankThank
you foryou
buying
this TV
! Please
read this
manual
thoroughly
beforebefore
operating
the TV.the TV. Make
for buying
this
TV ! Please
read
this manual
thoroughly
operating
Make sure the TV was
in transit.
transit. Should the
the TV is damaged, do no
no install itit and
and contact
was not
not damaged in
your
dealer.
Check
you
have
allall
the
accessories
contact
your
dealer.
Checkthat
that
you
have
the
accessoriesaccording
accordingtotothe
themodel.
model.
2.SAFETY PRECAUTIONS
Safety
Precautions
Put the TV on stable surface.
Put the TV on a stable surface.
Do not place any material on the TV.
Do not place any material on the TV.
Minimum distances
10cm
10cm
20cm
5cm
Do
or
Donot
notuse
usethe
theTV
TVwith
withfixtures
fixturesother
other than
than those
those provided
provided or
suggested by the manufacturer.
suggested by the manufacturer.
Do not block or cover the ventilation openings on the
IfDo
younot
have
a wall
mount,
that itopenings
is steady.on the TV.
block
or cover
thecheck
ventilation
TV.
If you have a wall mount, check that it is steady.
Powercord
cordand
andcables
cablesmust
mustbe
beproperly
properlyrouted
routedand
and protected
protected to
to prevent
Power
people from stepping on them and causing the TV to fall.
prevent people from stepping on them and causing the TV to fall.
Keep the TV dry and away from humidity.
Keep the TV dry and away from humidity.
2
4
Safety Precautions
Keep the TV away from heat sources.
Keep the TV away from heat sources.
Unplug the before cleaning it. Do not use solvent or liquid to
dry cloth.
Unplug the TV before cleaning it. Do not use solvent or liquid to
cleanclean
the TV. the TV. Only clean the TV with a soft and
Only clean the TV with a soft and dry cloth.
In case of troubleshooting, do not use spare parts other than
In case of troubleshooting, do not use spare parts other than
suggested
by the manufacturer.
Using inadequate spare
thosethose
suggested
by the manufacturer.
Using inadequate spare
partsparts
can lead
to electric
shocks,
short-circuits
or other
can
lead to
electric
shocks,fireshort-circuits
fire or other
incidents.
incidents.
Unplug
the TV
during
lightening
storms
or
Unplug
the TV during
lightening
storms
or when unused
for long
periods
of time. of time.
periods
1.
2.
3.
when unused for long
1.where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
Where
the
MAINS
plug
or an appliance coupler is used as the disconnect device, the
device
shall
remain
readily
operable;
disconnect
device(battery
shall remain
readily
operable;
2.A
warning that batteries
pack or batteries
installed)
shall not be exposed to excessive
heat such as sunshine, fire or the like.
A warning that batteries (battery pack or batteries installed) shall not be exposed to
3.A warning that an apparatus with CLASS I construction shall be connected to a MAINS socket
excessive
heat such
as sunshine,
outlet
with a protective
earthing
connection. fire or the like.
IMPORTANT
INFORMATION
A warning
that an apparatus with CLASS I construction shall be connected
If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due
socket outlet with a protective earthing connection.
to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
to a MAINS
· Using cabinets or stands recommended by the manufacturer of the television.
· Only using furniture that can safely support the television.
IMPORTANT
INFORMATION
•
· Ensuring the television is not overhanging the edge of the supporting furniture.
If aplacing
television
is notonpositioned
inexample,
a sufficiently
stable
location,
it can
· Not
the television
tall furniture (for
cupboards
or bookcases)
without
hazardous
due
to falling.
injuries,
particularly
anchoring
both the
furniture
and the Many
television
to a suitable
support.
be potentially
to children, can be avoided by
· Not
standing
the televisions
on cloth or
otheras:
materials placed between the television and
taking
simple
precautions
such
•
supporting furniture.
Using cabinets
or stands
recommended
by the
manufacturer
ofitsthe
television.
· Educating
children about
the dangers
of climbing on furniture
to reach
the television or
controls.
•
Only using furniture that can safely
3 support the television.
•
Ensuring the television is not overhanging the edge of the supporting furniture.
•
Not placing the television on tall furniture (for example, cupboards or bookcases)
without anchoring both the furniture and the television to a suitable support.
•
Not standing the televisions on cloth or other materials placed between the television
and supporting furniture.
•
Educating children about the dangers of climbing on furniture to reach the television or
its controls.
5
3. IN THE CARTON
In
3. INthe
THE carton
CARTON
3. IN THE CARTON
TV
TVSET
SET
TV SET
TV SET
Remote
Control
Remote Control
Remote Control
Remote Control
1.5V
1.5V
1.5V
1.5V 1.5V
1.5V
Adaptor & Power Cord
Adapter & Power Cord
Adapter & Power Cord
Adapter & Power Cord
AAA Batteries
AAA Batteries
AAA Batteries
AAA Batteries
USER'S MANUAL
USER'S MANUAL
USER'S MANUAL
User's Manual
User's Manual
User’s Manual
User's
Manual
4
4
4
6
Front & Back Connections of LED
4. FRONT & BACK CONNECTIONS OF LED
4. FRONT & BACK CONNECTIONS OF LED
FrontFront
View
View
Front
(Picture
are View
for reference only.)
(The sample is subject to the real product.)
4. FRONT & BACK CONNECTIONS OF LED
Front View
1.
2.
3.
4.
5.
6.
7.
1. Press“SOURCE”to
select
input
source.
Press“SOURCE”to
select
the the
input
source.
1. Press“SOURCE”to
select
the input
source.
2. Press
“MENU”to
bring
the
mainmenu
menu onthe
the screen.
Press
“MENU”to
bring
upup
the
main
2. Press
“MENU”to
bring
up
the
main menuon
on thescreen.
screen.
3. Press“CH+”or “CH-”to change channels .
1.3.Press“SOURCE”to
select
the inputchannels
source. .
to change
Press“CH+”or
“CH-”
Press“CH+”or
“CH-”
to change
channels
.
4. Press“VOL+”or “VOL-”to increase or decrease the sound level.
2.4.Press
“MENU”to bring
up theincrease
main menu
the screen.
Press“VOL+”or
“VOL-”to
oron
decrease
the sound level.
Press“VOL+”or
“VOL-”to
increase
or decrease
5.
Press“POWER”
button
to turn
standby
modethe
on sound
or off. level.
to change
channels
3. Press“CH+”or
“CH-”
.
5. Press“POWER” button to turn standby mode on or off.
4. Press“VOL+”or
“VOL-”to
or red
decrease
theon
sound
level.
6.
Indicator:
Shows
standby
mode
and
green while
while your
your TV
TV is
is turned
turnedon
on. .
Press“POWER”
button
toincrease
turn
standby
mode
or
off.
6.ON/OFF
ON/OFFLED
LED
Indicator:
Shows
red in
in
standby
mode
and green
5. Press“POWER” button to turn standby mode on or off.
7.7.IR
Infrared
IRSensor:
Sensor:
Infraredsensor
sensorfor
for the
the
remote control
control
ON/OFF
LED Indicator:
Shows
red
in remote
standby
mode.. and green while your TV is turned
6. ON/OFF LED Indicator: Shows red in standby mode and green while your TV is turned on .
on.
7. IR Sensor: Infrared sensor for the remote control .
IR
Sensor:
Infrared
sensor
for the remote control.
Back
View
and
Connections
Back
View
andControl
Control
Connections
Back View and Control Connections
1.
1.DC
input socket.
socket.
1.DC IN:
IN: DC
DC input
DC IN: DC Input socket.
2.
Connect
to the
the External
External drive.
drive.
1.DC IN:
DC input
socket.to
2. USB:
USB:
Connect
Back View and Control Connections
2.
USB: Connect to the External drive.
to the External
drive.
2. USB:
3.
HDMI1/HDMI2:
Connect
the HDMI
HDMIoutput
outputjack
jack
3.Connect
HDMI1/HDMI2:
Connect
the
3. HDMI1/HDMI2:
Connect the HDMI output jack
3. HDMI1/HDMI2:
of
DVD.
ofDVD.
DVD. Connect the HDMI output jack
of
of DVD.
4. VGA: Connect the
the PC-RGB
PC-RGB output
outputjack
jackof
ofPC.
PC.
4. VGA:
Connect
the PC-RGB
output
4. VGA:
Connect
the PC-RGB
output
jack ofjack
PC.of DVD.
5. PC AUDIO : Connect
Connect the
the right
right Audio
Audioout
output
putjack
jack
5. AUDIO
PC AUDIO:
Connect
the Audio
right Audio
5. PC
: Connect
the right
out putoutput
jack jack
of PC.
of PC.of PC.
COMPONENT
IN:
Connect
the YPbPr
YPbPr
output
Connect
the
output
6. 6.COMPONENT
IN: IN:
Connect
the YPbPr
output
jack
IN: Connect
the YPbPr
output
6 . COMPONENT
DVof
D
or
VCR.
jack
VCR.
or VCR.
jack ofof
DVD
orDVD
VCR.
7. IN:
IN:
Connect
thethe
antenna.
RF
IN:
Connect
the
antenna.
7 .RF
antenna.
Connect
the antenna.
7 . RF
totoaaheadphone
set.
headphone
set.
8 . :: Connect
8 . 8.: Connect
to a headphone
set.
Connect
headphone
set.
Connect
the audio
amplifier.
9 . COAX:
Connect
audio
amplifier.
9. 9 .COAX:
Connect
thethe
audio
amplifier.
the
audio
amplifier.
COAX:
. AV10
/ Audio
IN
Connect
the Video
output
1010.
jack
: Connect
//Audio
the
Video
output
jack
AV
IN:IN
Connect
the Video/Audio
output
jack of
. :AV
the
Video
Audio
output
jack
of DVD
VCR.
DVD
or
VCR.
oforDVD
or VCR.
of DVD or VCR.
PC IN
DC IN
USB
HDMI1
1
2
3
PC
PC
ININ
VGA AUDIO
Y
DC
USB HDMI1
VGA AUDIO
AUDIO
HDMI1 VGA
DC
ININ USB
11
22
33
4
44
AV IN
COMPONENT IN
5
55
COMPONENTIN
IN
COMPONENT
Pb
Pr
RF
IN
YY
6
Pb
Pb
66
Pr
Pr
7
RFIN
IN
RF
8
COAX
77 5 88
9
55
VIDEO
COAX
COAX
99
L
R AV
AV IN
INHDMI2
VIDEO
VIDEO
10
L
L
10
10
R
R
3
HDMI2
HDMI2
33
7
5. TV INSTALLTION DRAWINGS
5. TV INSTALLTION DRAWINGS
TV Installation Drawings
Power Cord Connection
Power Cord Connection
Power Cord Connection
DC12V IN
DC12V IN
- Connect the power cord correctly as shown.
- Connect
the
powercord
cordcorrectly
correctlyas
as shown.
- Connect
the
power
- Press
the
POWER switch
of yourshown.
LED TV to switch on the LED TV.
- Press
the
POWER
switch
of your
LED
to switch
the
LED
TV.
- Press
the
POWER
switch
of
your
LED
TV TV
to switch
oninon
the
LED
TV.Blue.
The power indicator on the front panel
lights up
Green
or
The
power
indicator
thefront
frontpanel
panellights
lights up
up in
in Green
The
power
indicator
ononthe
Green or
or Blue.
Blue.
Antennas Connection
VHF
VHF
ANTENNA
ANTENNA
Antennas Connection
Antennas Connection
UHF
ANTENNA
UHF
ANTENNA
OUTDOOR
ANTENNA
OUTDOOR
AMPLIFIER
ANTENNA
AMPLIFIER
RF IN
RF IN
INDOOR
ANTENNA
INDOOR
AMPLIFIER
ANTENNA
AMPLIFIER
75 OHM
ANTENNA
75 OHM
PLUG
ANTENNA
PLUG
POWER PLUG OF
ANTENNA
POWER
PLUG OF
AMPLIFIER
ANTENNA
AMPLIFIER
To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as
To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as
To ensure
good
andfrom
sound,
TV antenna
system
needs
be installed.
Thecorrect
antenna
Shown
canpicture
be soured
TV equipment
shops,
which
will to
provide
service for
installation
Shown
can
be soured
TV equipment
shops, which
will provide
service
for correct
installation
system
as connection.
shown
can After
befrom
soured
from TV
equipment
shops,
which
will
provide
service
foras shown.
and
installation,
insert
the 75-ohm
antenna
plug
into
the antenna
jack
and connection.
75-ohm antenna
plug75-ohm
into the antenna
antenna jack
shown.
correct
installationAfter
and installation,
connection.insert
Afterthe
installation,
insert the
plugasinto
the antenna jack as shown.
6
6
8
HDMI Connection
TV Installation Drawings
TV Back
HDMI
DC IN Connection
USB
VGA
HDMI1
PC IN
COMPONENT IN
AUDIO
Pb
Y
HDMI Connection
Pr
COAX
RF IN
TV Back
AV IN
VIDEO
L
R
TV Back
PC IN
DC IN
HDMI2
TV Back
USB
HDMI1
AV IN
COMPONENT IN
VGA AUDIO
Y
Pb
Pr
RF IN
COAX
VIDEO
HDMI Cable
L
R
HDMI2
HDMI Cable
HDMI Cable
HDMI Cable
DVD or VCR Back
DVD or VCR Back
DVD or VCR Back
DVD or VCR Back
DVD or VCR
DVD or VCR
DVD or VCR
DVD or VCR
The
input
enables
the digital
transfer
of audio/video/control
signals through one
TheHDMI
HDMI
inputconnection
connection
enables
transfer
audio/video/control
The HDMI
input
connection
enablesthe
the digital
digital transfer
of of
audio/video/control
signalssignals
through one
cable
only.one cable only.
through
cable only.
VGA
Connection
VGA
Connection
VGA Connection
IN
DC IN DC
USB
PC IN PC IN
COMPONENT
COMPONENT
IN IN
USB
AUDIO Y Y PbPb
VGA VGA
AUDIO
HDMI1HDMI1
VGA Cable
PrPr
RFIN
IN
RF
TV
TVBack
Back
Audio Cable
VGA Cable
Audio Cable
Connect the RGB output of the PC to the VGA jack on the set. Connect the AUDIO output of the
PCthe
to the
PCoutput
AUDIOof
jack
thetoset
the VGA
input
source
with using
SOURCE
button
Connect
RGB
theonPC
the. Select
VGA jack
on the
set.
Connect
the AUDIO
output
of on
the
Connect the RGB output of the PC to the VGA jack on the set. Connect the AUDIO output
of the PC to the PC AUDIO jack on the set . Select the VGA input source with using SOURCE
the
remote
button
oncontrol.
the remote control.
7
thePC
remote
control.
PC to the
AUDIO
jack on the set . Select the VGA input source with using SOURCE button on
7
9
TV Installation Drawings
COAX Connection
COAX Connection
COAX Connection
AV IN
COAX
VIDEO AV LIN
R
HDMI2
COAX
VIDEO
R
HDMI2
L
TV Back
TV Back
COAX Cable
COAX Cable
COAX
COAX
the audio amplifier back
the audio amplifier back
Audio amplifier
Audio amplifier
Connect to Audio Amplifier device to the COAX output jack on the TV.
Connect to Audio Amplifier device to the COAX output jack on the TV.
Connect to Audio Amplifier device to the COAX output jack on the TV.
USB Connection
USB Connection
USB Connection
PC IN
COMPONENT IN
DC IN
USB
HDMI1
VGAPC AUDIO
IN
Pb
Y COMPONENT
INPr
RF IN
DC IN
USB
HDMI1
VGA AUDIO
Y
Pb
RF IN
Pr
TV Back
TV Back
USB Port
USB Port
Insert
USB
flash
drivetotothe
theUSB
USBport.
port.Select
Select USB
USB channel
viavia
the
SOURCE
button
Insert
thethe
USB
flash
drive
channelsource
source
the
SOURCE
button
on the USB
remote
control.
Insert
flash
drive to the USB port. Select USB channel source via the SOURCE button
on the remote control.
on the remote control.
10
TV Installation Drawings
AV Connection
AV Connection
AV Connection
AV IN
COAX
VIDEO AV LIN
R
HDMI2
COAX
VIDEO
R
HDMI2
L
TV Back
TV Back
Video cable
Video cable
DVD or VCR back
DVD or VCR back
DVD or VCR
DVD or VCR
Connect the VIDEO and AUDIO output jack of the DVD or VCR to the VIDEO jacks on the TV set
Connect
the
VIDEOMatch
and
AUDIO
output
the or
DVD
orto
VCR
toisthe
VIDEO
jacks
the
Connect
VIDEO
AUDIO
output
jack jack
of
theofDVD
VCR
the
jacks
theon
TV
setisTV
thethe
RCA
cable.and
the jack
colors:
Video
is yellow,
Audio
leftVIDEO
white,
andon
Audio
right
red.
using
set
using
the
RCA
cable.
Match
the
jack
colors:
Video
is
yellow,
Audio
left
is
white,
and
Audio
the
RCA
cable.
Match
the
jack
colors:
Video
is
yellow,
Audio
left
is
white,
and
Audio
right
is red.
using
Select the AV input source via the SOURCE button on the remote control.
Select
AV input
source
viainput
the SOURCE
button
on the remote
control.
rightthe
is red.
Select
the AV
source via
the SOURCE
button
on the remote control.
YPbPr Connection
YPbPr Connection
YPbPr Connection
TV Back
TV Back
PC IN
TV Back
TV Back
AV IN
COMPONENT IN
DC IN
USB
HDMI1
VGAPC AUDIO
IN
Pb
Y COMPONENT
INPr
RF IN
COAX
VIDEO AV LIN
R
HDMI2
DC IN
USB
HDMI1
VGA AUDIO
Y
Pb
RF IN
COAX
VIDEO
R
HDMI2
Pr
YPbPr Cable
YPbPr Cable
L
Audio Cable
Audio Cable
Y
Pb Pr
L
R
Y
Pb Pr
DVD or VCR Back
DVD or VCR Back
L
R
DVD or VCR
DVD or VCR
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV set. Connect the Audio
Connect
YPbPr
output
ofAudio
the DVD
or
VCR
toYPbPr
theTV
YPbPr
input
on
the
set. Connect
the
Connect
YPbPr
ofthe
the
DVD
or
VCR
to
the
input
on the
TVRCA
set.TV
Connect
the Audio
output
of the
thethe
DVD
oroutput
VCR
to
input
jacks
on
the
set using
the
cable.
output
of the
DVD
VCR
to green,
the
jacks
theAudio
TV
setleft
using
the
cable.the
Audio
output
oforthe
DVD
or Audio
VCR
Audio
input
jacks
on
TVRCA
set
cable.
Match
the
jacks
colors
:Y
is
Pbtoinput
isthe
blue,
Pr ison
red,
isthe
white
andusing
Audio
rightRCA
is red.
Match
the
jacks
colors
: Ysource
is
blue,
Pr is
red,
Audio
is
white
and Audio
right isright
red. is
Select
Component
input
via Pb
theis
SOURCE
button
on Audio
theleft
remote
Match
the
jacks
colors
: Ygreen,
is green,
Pb
is blue,Pr
is red,
left
iscontrol.
white
and Audio
Select Component input source via the SOURCE button on the remote control.
red. Select Component input source via the SOURCE button on the remote control.
9
9
11
7. REMOTE CONTROL
Remote
Control
7. REMOTE CONTROL
Remote Control Instructions in TV/Media mode
Remote Control
Instruction
TV/Media mode
Remote
ControlinInstructions
in TV/Media mode
STANDBY: Turn the LED TV ON or OFF.
STANDBY
Turn the
LEDthe
TV TV/RADIO
ON or OFF. mode.
TV/RADIO:
Select
STANDBY
TV/RADIO
Turn the LED
TV ON or OFF.
SOURCE:
Press
to mode.
display the OSD input source.
Select
theSOURCE
TV/RADIO
TV/RADIO
SOURCE
Select the Press
/ mode.
to select an input source, and then TV/RADIO
Press SOURCE to display the OSD input source ,
Press
▲▼OK
to to
select
an input source, and then press
SOURCE
press
confirm.
to display the OSD input source ,
Press SOURCE
OK to confirm.
PPress
MODE:
Press
to select
the source,
picture and
modes.
▲▼
to select
an input
then press
P . MODE
OK to confirm.
Press
to select
the picture
modes .the audio mode.
S.MODE:
Press
this button
to change
P . MODE
S.MODE
SLEEP:
Lets
you
select
amount
ofthe
before
Press
this
button
to change
audio
mode.your TV turn . time
Press to
select
the
picture
modes
SLEEP
S.MODE
itselfyou
offselect
automatically.
Lets
amount of time before your TV turn
Press this button to change the audio mode.
itself off automatically.
SLEEPMUTE
MUTE:
Press to mute the sound. Press again or press VOL+ to Lets you
select
amount
time Press
beforeagain
your or
TVpress
turn VOL+ to
Press
to mute
the of
sound.
un-mute
the
itself offun-mute
automatically.
the
TV.TV.
MUTE NUMBER BUTTONS
NUMBER
BUTTONS:
PressTV
0-9
to select
a TVwhen
channel
directly Press to
mute
thetosound.
again
or press
VOL+
to are
Press
0-9
select aPress
channel
directly
you
the TV. TV. The channel change after 2 seconds.
un-mute
watching
when you are watching TV. The -/-- BUTTONS
NUMBER
Press
this button
tochannel
enter Channel
Press 0-9
to select
a TV
directlyList.
are
channel
change
awhen
fter 2 you
seconds.
watching TV. The channel change after 2 seconds.
Return
the previous
channel
viewed.
-/-- Press
-/--:
this to
button
to enter
Channel
List.
MENU
Press this
button to enter Channel List.
Bringsto
upthe
theprevious
main TV menu
to the
screen.
: Return
channel
viewed.
Return EXIT
to the previous channel viewed.
Exit the main TV menu to the screen.
MENU:
MENU Brings up the main TV menu to the screen.
DISPLAY
Brings up the main TV menu to the screen.
Press
display
source
andscreen.
channel's information.
EXIT:
Exit
thetomain
TV the
menu
to the
EXIT
THUMBSTICK( ▲/ ▼/◄ / ►/ ENTER)
Exit the main TV menu to the screen.
DISPLAY:
Press
totodisplay
the
andmenus
channel’s
Allows
you
navigate
thesource
on-screen
and adjust
DISPLAY
the system settings to your preference.
display
the source and channel's information.
Press toVOL+/VOLinformation.
THUMBSTICK(
▲/ ▼/◄/ /decrease
►/ ENTER)
Press to increase
the sound level.
THUMBSTICK(
/ / the/ on-screen
ENTER): menus and adjust
Allows CH+/CHyou to navigate
the system
settings
your preference.
Press
to scan to
through
channels.
Allows
you to navigate the on-screen menus and adjust the
VOL+/VOLPress to increase / decrease the sound level.
system settings to your preference.
CH+/CHPress to scan
through
channels.
VOL+/VOL:
Press
to increase
/ decrease the sound level.
10
CH+/CH: Press to scan through channels.
10
12
7. REMOTE CONTROL
Remote
Control
Remote Control Instructions in TV/Media mode
Remote Control Instruction in TV/Media mode
HOLD: Hold on or off for current page display.
STANDBY
the LED
ON or
OFF. Teletext mode).
INDEX:Turn
Request
theTV
index
page(In
TV/RADIO
Enter toSelect
the recorded
list(Inmode.
DTV mode).
the TV/RADIO
SOURCE
SIZE: Change display size i teletext mode.
Press SOURCE to display the OSD input source ,
▲▼
to select
an input source, and then press
AUDIO:Press
Audio
select
button.
OK to confirm.
ZOOM:PPress
while playing and the picture will zoom in once.
. MODE
. alternate subtitle Press
select
the picture
SUBTITLE
: IntoDTV
mode,
pressmodes
to select
S.MODE
view/playback
of a DTV program.
Presslanguages
this button during
to change
the audio mode.
SLEEP
In teletext
mode,ofpress
display
Lets you
select amount
time to
before
yourP.100.
TV turn
itself off automatically.
AUDIO:MUTE
Audio select button.
Press to mute the sound. Press again or press VOL+ to
Recordun-mute
button:the TV.
NUMBER BUTTONS
MEDIA:Press
Press0-9
to to
display
the Media menu.
select a TV channel directly when you are
watching TV. The channel change after 2 seconds.
FAV: Press to display the FAV list.
-/-Press this button to enter Channel List.
/
: Previous/next chapter in Media mode.
to the previous
channel viewed.
: StopReturn
playing(In
Media mode).
MENU
up the main
TVmode).
menu to the screen.
: PlayBrings
or pause(In
Media
EXIT
Exit to
theenter
main TV
the screen.
EPG: Press
themenu
EPG to
menu.
DISPLAY
Press to display the source and channel's information.
THUMBSTICK( ▲/ ▼/◄ / ►/ ENTER)
Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
VOL+/VOLPress to increase / decrease the sound level.
CH+/CHPress to scan through channels.
10
13
Remote Control
Remote Control Setup
Remote
Remote Control
Control Setup
Setup
1. Open the cover.
Remote Control Setup
1. Open the
2. cover.
Uses three A size batteries. When inserting the batteries, make sure correct polarities “+”
1.
Open
the
cover.
2. Uses three A
size
batteries.When
inserting
the
batteries,
sure correct
polarities
“ + ” and “ - ”
and
“-” marks
on the batteries
line up
correctly
withmake
compartment
markings
.
2. marks
Uses
A
size
batteries.When
inserting
the
batteries,
make
sure correct
polarities
“ + ” and “ - ”
1.
Openthree
the
cover.
.
on the
batteries
line up correctly
with
compartment
markings
.
3. the
Replace
the battery
.
on
batteries
line. upcover.
correctly
with
compartment
markings
.
2.
Uses
three
A
size
batteries.When
inserting
the
batteries,
make
sure correct
polarities “ + ” and “ - ”
3. marks
Replace
the
battery
cover
3. marks
Replace
cover
.
on the
the battery
batteries
line. up correctly with compartment
markings .
3. Replace
thethe
battery
cover
. on a even surface and insert the supplied batteries into the remote
Place
remote
control
control as follows.
Place the remote control on a even surface and
Place the remote control on a even surface and
insert the supplied batteries into the remote control as follows.
Place
control
on ainto
even
surface
and
insert the1.remote
supplied
batteries
the
remote
control
follows.
Softly push
the back
cover
to
open the
batteryas
compartment.
1. Softly
the back
coverinto
to open
the battery
compartment.
insert
thepush
supplied
batteries
the remote
control
as follows.
1. Softly push the back cover to open the battery compartment.
1. Softly push the back cover to open the battery compartment.
2. Insert two
batteries(1.5V
size AAA
),please
make
matches
marks
inside the
2. Insert
two batteries(1.5V
size AAA
),please
makesure
sure the
the polarity
polarity matches
thethe
marks
inside
2. Insert two
batteries(1.5V
size AAA
),please
make
sure
the
polarity
matches
the
marks
inside the
compartment.
the
compartment.
2.
Insert two batteries(1.5V size AAA ),please make sure the polarity matches the marks inside the
compartment.
compartment.
3. Softly press the back cover to close it.
3. Softly press the back cover to close it.
3. Softly press the back cover to close it.
3. Softly press the back cover to close it.
14
Menu Operation
7 . MENU OPERATION
MENU OPERATION
OPERATION
77In..ATV/DTV
MENU
mode press the MENU button to enter the main menu. A window will appear, use ◄►
toATV/DTV
scroll
through
the
following
headings:
CHANNEL,
PICTURE,
SOUND,
TIME,
In ATV/DTV
mode
press
themenu
MENU
button
to
enter
themenu.
main menu.
A window
willOPTION
appear,
In
mode
press
the MENU
MENU
button
to enter
enter
the main
main
menu.
window
will appear,
appear,
use ◄►
◄►use
In
ATV/DTV
mode
press
the
button
to
the
AAwindow
will
use
▼following
or OK the
to menu
enter
the
sub
menus
under the
headingsSOUND,
listed above.
and
LOCK.
to
scroll
through
the
following
menu
headings:
CHANNEL,
PICTURE,
SOUND,
TIME,
OPTION
to
scroll
the
headings:
CHANNEL,
PICTURE,
TIME,
OPTION
/ through
to Press
scroll
through
following
menu
headings:
CHANNEL,
PICTURE,
SOUND,
TIME,
▼ or
or OK
OK
to enter
enter
the sub
sub
menus
under to
the
headings
listed
above.
and
LOCK.
Pressmode,
While
in MENU
press
the MENU
button
to return
the
previous
menu
window, or press
▼
to
the
menus
under
the
headings
listed
above.
and
LOCK.
Press
OPTION
andmode,
LOCK.
Press
or
OK
tobutton
enter
the
sub menus
under the
headings
listed
above.
While
in
MENU
press
the MENU
MENU button
to return
return to
to the
the previous
previous menu
menu window,
window, or
or press
press
EXITin
toMENU
exit menu
mode
completely.
While
mode,
press
the
to
While
in
MENU
mode,
press
the
MENU
button
to
return
to
the
previous
menu
window,
or
EXIT to
to exit
exit menu
menu mode
mode completely.
completely.
EXIT
press EXIT to exit menu mode completely.
INSTALLATION GUIDE
INSTALLATION GUIDE
GUIDE
INSTALLATION
Installation Guide
Installation Guide
Installation
Guide
Installation
Guide
Please
set the following
options, then
Backlight Mode
Backlight
Mode
Default
Backlight
Mode
Default
Dynamic
Default
Dynamic
Mild
Dynamic
Mild
Standard
Mild
Standard
Standard
Move
Move
Move
Select
OK
OK
OK
Select
Select
Press OK button to begin auto tuning.
Please set the following options, then
Please set the following options, then
Press OK button to begin auto tuning.
OK button to begin auto tuning.
English
OSDPress
Lauguage
OSD
Lauguage
Country
OSD
Lauguage
Country
Tune Type
Country
Tune Type
Tune Type
Move
Quit
EXIT
EXIT
EXIT
Quit
Quit
Move
Move
Select
OK
OK
OK
Select
Select
English
Australia
English
Australia
ATV+DTV
Australia
ATV+DTV
ATV+DTV
Quit
EXIT
EXIT
EXIT
Quit
Quit
Press ▲▼◄► to set the TV backlight mode and press OK to begin auto tuning.
Press
▲▼◄►
set
the
TV
backlight
mode and
andmode
press OK
OK
to
begin
auto
tuning.
Press
/ tototo
/set
/the
set
the
TV mode
backlight
and
press
to begin
Press
▲▼◄►
set
theto
OSD
language/Country/Tune
Type
andOK
press
OK
to auto
begintuning.
auto tuning.
Press
▲▼◄►
TV
backlight
press
to
begin
auto
tuning.
Press
▲▼◄►
to
set
the
OSD
language/Country/Tune
Type
and
press
OK
to
begin
auto
tuning.
Press
/ to/set/the to
setlanguage/Country/Tune
the OSD language/Country/Tune
Type OK
andtopress
OK
to begin
auto tuning.
Press
▲▼◄►
OSD
Type and press
begin
auto
tuning.
CHANNEL Menu
CHANNEL Menu
Menu
CHANNEL
CHANNEL Menu
ATV Manual Tuning
Program Edit
ATV Manual Tuning
ATV
Manual
Tuning
Signal
information
Program Edit
Program
RecordEdit
Start
Signal information
Signal
information
ed List
Record
Record Start
Record
Start
ed Mode
Record
Record ed List
ed
ListList
Record
Schedule
Record ed Mode
Mode
Record
P VR ed
File
System
Schedule List
Schedule List
P VR File System
P VR File System
Auto Scan
DTV Manual Tuning
Auto Scan
Auto
Scan
ATV
Manual Tuning
DTV Manual Tuning
DTV
ManualEdit
Tuning
Program
ATV Manual Tuning
ATV
Manual
Tuning
Signal information
Program Edit
Program
Edit
Record Start
Signal information
Signal information
Record Start
Record Start
CHANNEL
CHANNEL
CHANNEL
Move
Move
Move
MENU
MENU
MENU
Back
Back
Back
OK
OK
OK
CHANNEL
CHANNEL
CHANNEL
Select
Select
Select
EXIT
EXIT
EXIT
Quit
Move
Quit
Quit
Move
Move
MENU
MENU
MENU
Back
Back
Back
OK
OK
OK
Select
Select
Select
EXIT
EXIT
EXIT
Quit
Quit
Quit
to display
◄► to/ select
menu
OKOK
or ▼
Press
MENU
button
thethe
main
menu,
use use
CHANNEL
, press
Press
MENU
button
to display
main
menu,
to select
CHANNEL
menu,
press
or
▼
to
◄►
to
select
menu
press
OK
or
Press
MENU
button
display
the
main
menu,
use
CHANNEL
,
to
enter
and
press
menu
to
return
to
the
main
menu
,
.
to display
to select CHANNEL menu , press OK or ▼
Press
button
the
main to
menu,
use ◄►
to MENU
enter, and
press
menu to
return
the main
menu.
to
enter,, and
and press
press menu
menu to
to return
return to
to the
the main
main menu
menu..
Note
to
enter
Note
CHANNEL can be only selected under ATV/DTV mode. The CHANNEL menu is disabled while in
Note
CHANNEL
can
be onlyunder
selected
undermode.
ATV/DTV
The CHANNEL
menu iswhile
disabled
CHANNEL
can be
be only
only
selected
ATV/DTV
Themode.
CHANNEL
menu is
is disabled
disabled
in
all NOTE:
other input
modes.
CHANNEL
can
selected
under ATV/DTV
mode. The
CHANNEL
menu
while in
while
in
all
other
input
modes.
all
other
input
modes.
all other input modes.
Auto Scan
Auto
Scan
Auto
Scan
Auto
Scan
Country
Auto Scan
Auto Scan
Scan
Auto
Australia
Country
Tune Type
Country
Tune Type
Tune Move
Type
Move
Move
OK
OK
OK
OK
OK
OK
13
13
13
Australia
ATV+DTV
Australia
ATV+DTV
Exit
ATV+DTV
EXIT
EXIT
EXIT
Exit
Exit
15
Auto Scan
Auto Scan
Menu Operation
In the Auto Scan menu there are 2 options for you select from, Country and Tune Type.
In
the Auto
menu
there are
options
for you
select
from,
andIfTune
Type. ATV+DTV,
Press
to select
Country
and2 Tune
Type,
press
OK to
startCountry
scanning.
you select
◄/ ►Scan
Press ◄/ ► to select Country and Tune Type, press OK to start scanning. If you select ATV+DTV,
the firstAuto
50% Scan
of the processing is for ATV tuning, while the second 50% represents DTV tuning.
the first
50% of the processing is for ATV tuning, while the second 50% represents DTV tuning.
Auto
WhenScan
ATV tuning, you can press MENU to skip ATV tuning and start DTV tuning, or press EXIT to
When
ATV
tuning,
you
press
skip
ATV
tuning
andfrom,
startCountry
DTV
tuning,
or press
In
thetuning.
Auto
Scan
menu
there
are
2MENU
options
for
you
select
from,
Country
and
Tune
Type.
In the
Auto
Scancan
menu
there
are 2tooptions
for
you
select
and Tune
Type.EXIT to
exit
exit
tuning.
Press ◄Press
/ ► to select
and Tune
presspress
OK to
scanning.
If you
select
ATV+DTV,
/ to Country
select Country
and Type,
Tune Type,
OKstart
to start
scanning.
If you
select
Channel
Tuning
the first ATV+DTV,
50% of thethe
processing
is the
for ATV
tuning,iswhile
thetuning,
second
50%the
represents
DTV
tuning.
first 50% of
processing
for
ATV
while
second 50%
represents
Channel Tuning
Programme(s)
: press
0 ATV
TV
DTVtuning,
tuning.you
When
tuning,
youtocan
MENU
toand
skipstart
ATV DTV
tuning
and start
DTV tuning,
When ATV
canATV
press
MENU
skip
tuning
tuning,
or press
EXIT to
:: 0
0
:: 0
0
TV
DTV
DTV
Radio
or press EXIT to exit tuning.
exit tuning.
Programme(s)
Programme(s)
Programme(s)
Programme(s)
Programme(s)
: 0
Channel
Tuning
474 . 00 MHz (TV)
Programme(s)
:
474 .000 MHz (TV)
Radio
9%
TV
9%
DTV
MENU
Radio
MENU
:
0
Programme(s)
Back
0
Programme(s)
:
Back
Quit
Quit
.
474 00 MHz (TV)
9%
DTV Manual Tuning
DTV Manual Tuning
EXIT
EXIT
MENU
Back
EXIT
Quit
You can manually tune DTV channels in the CHANNEL menu.
You
canthe
manually
tune DTV
channels
in the CHANNEL
Press
◄►
buttons
to select
the channel
you wish tomenu.
tune, then press ENTER button to scan for
DTV
Manual
Tuning
Press
the ◄► buttons to select the channel you wish to tune, then press ENTER button to scan for
the channel.
You can manually tune DTV channels in the CHANNEL menu.
the channel.
DTV Manual
Press /Tuning
the buttons to select the channel you wish to tune, then press ENTER button to
You canscan
manually
DTV channels inDTV
the CHANNEL
menu.
for thetune
channel.
Manual Tuning
Press the ◄► buttons to select the channel
you wish
to tune, then press ENTER button to scan for
DTV Manual
Tuning
UHF CH 27
the channel.
UHF CH 27
OK to search
DTV Press
Manual
Tuning
Bad
Normal
Press OK
to search
UHF CH 27
Normal
Bad
Back
MENU
MENU
EXIT
Good
Good
Quit
EXIT Quit
Back
Press OK to search
Bad
Normal
Good
ATV Manual
Tuning
ATV Manual
Tuning
ATV
Manual
Tuning
You canYou
manually
tune ATV
channels
in the in
CHANNEL
menu.
can manually
tune
ATV channels
the CHANNEL
menu.
You can manually tune ATV channels in theBack
CHANNEL menu.
Quit
MENU
EXIT
ATV Manual Tuning
ATV Manual Tuning
ATV Manual Tuning
Storage To 1
◄
►
Storage
To 1
◄
You can manually tune ATV channels
in
the
CHANNEL
System DK menu. ►
◄
►
System DK
◄
►
Current CH 1
◄
►
CH 1
◄
Manual
SearchTuning ►
◄ ATV Current
►
◄
◄
◄
◄
◄
◄
◄
◄
►
►
►
►
►
►
Search
Storage
To 1
Fine - Tune
Fine
- Tune
System
DK Mhz
Frequency
511.31
Frequency 511.31 Mhz
Current CH 1
Move
Move
Save
Search
Save
EXIT
EXIT
Fine - Tune
Frequency 511.31 Mhz
14
14
Quit
Quit
►
►
16
Menu Operation
Storage
to
Storage
to: Press
/ the buttons to change the numbered location of the found channel.
press the ◄► buttons to change the numbered location of the found channel.
System:
Select
the
system
using the / buttons.
System
Current
thethe
current
channel number, press the / buttons to choose the SelectCH:
the Displays
system using
◄► buttons.
Current CH
channel you wish to modify.
Displays
thethe
current
number,
press
the ◄►the
buttons
to choosetothe
channel
you wish to modify.
Search:
Press
/ channel
buttons
to scan
through
frequencies
find
new channels.
Search
Fine tune: In case of bad reception, you can press the / buttons to make fine Press the ◄► buttons to scan through the frequencies to find new channels.
Fine tune
adjustments to the tuning. After manual tuning is complete, please press the RED In case ofkey
save anyyou
found
channels.
badto
reception,
can press
the ◄► buttons to make fine adjustments to the tuning.
After manual tuning is complete, please press the RED key to save any found channels.
Program
EditEdit
Program
Program Edit
CH . NAME
SKIP
LOCK
FAV
2 ABC TV Meihour
DTV
20 ABC HDTV
Move
Type
DTV
702 BBC Radio 2
Radio
703 BBC Radio 3
Radio
704 BBC Radio 4
Radio
714 heat
Radio
1 C-26
ATV
2 C-44
ATV
3 C-56
ATV
OK
Select
MENU
Back
Delete
Move
Skip
Rename
FAV
FAV
Use ▲▼ to navigate through the Program Edit window.
Use
/
to navigate through the Program Edit window.
DELETE
Press the RED button to delete the highlighted channel, a red circle will appear next to the channel
DELETE:
Press the RED button to delete the highlighted channel, a red circle will appear next to name.
Press the
theRED
channel
name.
key again
to confirm delete.
to return
theagain
main menu.
Press MENU
Press the
RED tokey
to confirm delete.
MOVE
Press MENU to return to the main menu.
Press ▲▼ to select the channel , press yellow button to enter the move mode, then press ▲/▼
to move the channel location, press yellow button again or press OK to confirm.
MOVE:
Press / to select the channel , press yellow button to enter the move mode, then,
Press MENU to return to the main menu.
press / to move the channel location, press yellow button again or press OK to confirm.
SKIP
Press
MENU
to the
mainyou
menu.
Press
▲ ▼totoreturn
select the
channel
wish to skip.
Press the BLUE button, a logo will appear next to the channel name and the channel will be skipped
when
you scroll
through
channels.
SKIP:
Press
/ to
selectthe
the
channel you wish to skip.
Press the BLUE button again on the highlighted channel to disable the skip function.
Press
the
BLUE
button,
a
logo will appear next to the channel name and the channel will be Press MENU to return to the main menu.
skipped when you scroll through the channels.
Press the BLUE button again on the highlighted channel to disable the skip function.
Press MENU to return to the main menu.15
17
Menu Operation
Rename(Only available in ATV)
Modify current channel name, only used in ATV mode.
Rename (Only available in ATV):
Modify
current
channel
only button
used
in
mode.
Press
green
button
again
or name,
press
to ATV
confirm.
Modify
current
channel
name,
only menu
used in
ATV mode.
Press
green
button
to
enter
RENAME
mode,
then
the change
/ / name.
/ change name.
Press
to enter RENAME mode, then use theuse
◄►▲▼
FAV green button
Rename(Only
available
inor
ATV)
Press
green
button
again
press
menu
to
confirm.the channel, then press the
Press
green
button
again
or
menu
button
to confirm.
Set
your
favorite
channel
bypress
pressing
the
▲ ▼button
buttons
to highlight
Modify
current channel name, only used in ATV mode.
FAV
button.
FAV:
Set your
favorite
channel bymode,
pressing
the the
/ buttons
to highlight the channel, then FAV
Press
buttonnext
to enter
then use
A logogreen
will appear
to theRENAME
channel name. When
you are◄►▲▼
viewing change
you canname.
press the FAV button
Set yourpress
favorite
channel
by pressing the ▲ ▼ buttons to highlight the channel, then press the
the
FAV
button.
Press
button
or channels.
press menu button to confirm.
to seegreen
a list of
your again
favorite
FAV button.
A
logo
will appear next to the channel name. When you are viewing you can press the Information
FAV
ASignal
logo will
appear next to the channel name. When you are viewing you can press the FAV button
Only
available
inchannel
DTV
Signal
Information
includes:channel
/network
/modulation/quality
button
tomode,
see
apressing
list of your
favorite
channels.
Set
your
favorite
bychannels.
the ▲
▼ buttons
to highlight the
channel,
then press the
to
see
a FAV
list
of
your
favorite
/strength.
FAV
button.
Signal
Information
Signal
Information: Only available in DTV mode, Signal Information includes: channel /
A
logoavailable
will
appear
nextmode,
to the channel
name. When
you are viewing/network
you can /modulation/quality
press the FAV button
PVR
MENU
Only
in DTV
Signal Information
includes:channel
network
/modulation/quality/strength.
to
see
aPVR
list of
your(See
favorite
channels.
page
32 for more details)
Enter
menu.
/strength.
Signal
PVR Information
MENU: Enter PVR menu. (See page 32 for more details)
PVR MENU
Press green button
to enter RENAME
Rename(Only
available
in ATV) mode, then use the ◄►▲▼ change name.
Only available in DTV mode, Signal Information includes:channel /network /modulation/quality
details)
Enter PVR menu. (See page 32 for more
PICTURE
Menu
/strength.
PICTURE Menu
PVR MENU
PICTURE
details)
Enter PVR menu. (See page 32 for more
Red
50
50
Green
50
Brightness
50
Blue
Standard
PICTURE Menu
Color Mode
Picture
50
Standard
Sharpness
Contrast
50
50
Tint
Brightness
PICTURE
Move
Screen
Blue
PICTURE
Sharpness
50
Red
Noise Reduction
50
50
Brightness
50
Color Temperature
OK
Back
Select 50
Color
Red
Quit
Move
50
Blue
MENU
Back
Aspect Ratio
OK
Noise Reduction
50
50
Middle
50
Green
Screen
PICTURE
EXIT
Middle
50
16 : 9
Aspect Ratio
50
Standard
50
Contrast
Tint
MENU
50
16 : 9
50
Aspect Ratio
Red
Noise Reduction
Green
50
50
Color Temperature
Color
Red Mode
Picture
Sharpness
PICTURE
Menu
Contrast
Picture Mode
Select16 : 9
EXIT
Quit
Middle
Screen
50
toTintdisplay
◄►PICTURE
to/select
menu ,, press
OK
Press
button
main
menu,
useuse
PICTURE
PICTURE
PressMENU
MENU
button
displaythe
the
main
menu,
to select
PICTURE
press
OK or
or ▼
Quit
Quit
Color TemperatureSelect
Move
Back
Back
Select
to enter , and
press menu
to return to the
main menu . Move
Red
MENU
OK
EXIT
enter, and press menu to return to the main menu.
MENU
OK
EXIT
to
Press
MENU
button to display the main menu, use ◄► to select PICTURE menu , press OK or ▼
Picture
Mode
to enter , and
press menu
to return
to the
Quitmain menu .
Quit
Move
Back
Move
Back
Select
Select
Picture Mode
MENU
OK
MENU
EXIT
OK
EXIT
Picture
Mode
Standard
Picture Mode
to select PICTURE menu , press OK or ▼
Press
MENU
button to display
the main menu, use ◄►
to enter , and press menu to return to the main menu .
Picture Mode
Adjust
Picture Mode
MENU
Back
Standard
EXIT
Quit
Press ◄► to select the picture mode,press MENU to return to the main menu.
Adjust
Quit
Back
You can select from the following preset modes - Dynamic, Standard, Mild or User.
Standard
Picture Mode
Only
User
mode
allows
the
adjustment
of
Contrast,
Brightness,
Colour
Sharpness, Tint is only
Press ◄► to select the picture mode,press MENU to return to the main and
Press to/ adjust
to select
the picture mode,press MENU to return tomenu.
the main menu.
available
You
can select fromfor
theNTSC.
following
Standard,Quit
Mild or User.
Adjust preset modes - Dynamic,
Back
MENU
MENU
EXIT
EXIT
You
canmode
select
fromthe
the/adjustment
following
modes
- Dynamic,
Standard,
Mild or Tint
User.is only
/ Brightness
Color
/ Sharpness/Tint
Contrast
Only
User
allows
ofpreset
Contrast,
Brightness,
Colour
and Sharpness,
Press
select
the
picture
MENU
to return Brightness,
to the main menu.
◄►
Only
User
mode
allows
themode,press
adjustment
of Contrast,
Colour and Sharpness, Tint is
available
totoadjust
for
NTSC.
You
can select
from the following
preset
modes - Dynamic, Standard, Mild or User.
/ Brightness
/ Color
/ Sharpness/Tint
Contrast
only
available
to adjust
for NTSC.
Only User mode allows the
adjustment of Contrast, Brightness, Colour and Sharpness,
Tint is only
Contrast
50
available to adjust for NTSC.
Adjust / /Sharpness/Tint
Contrast/ Brightness
/ Brightness/ Color
/ Color
Sharpness /Back
Tint
Contrast
Contrast
MENU
EXIT
Quit
50
In User mode, select from Contrast/Brightness/Color/Sharpness using ▲▼ and press ◄► to
Adjust
Quit
Back
make adjustments.
MENU
EXIT
Contrast
50
In User mode, select from Contrast/Brightness/Color/Sharpness using ▲▼ and press ◄► to
make adjustments.
Adjust
Quit
16Back
MENU
EXIT
In In
User
mode,
select
fromfrom
Contrast/Brightness/Color/Sharpness
using ▲▼
and press
◄► press
to
User
mode,
select
Contrast/Brightness/Color/Sharpness
using
/ and
16
make adjustments.
to make adjustments.
16
/
18
Color Temperature
Menu
Operation
Color Temperature
Color Temperature
Medium
Color Temperature
Adjust
Back
MENU
EXIT
Quit
You can select from
the Temperature
following preset modes Cool,
Medium or Warm. Only User mode allows
Medium
Color
adjustment of Red, Green and Blue values.
Red/Green/Blue
Adjust
MENU
Back
EXIT
Quit
User
mode
press
to select
Red/Green
or Blue,
then press
◄►Only
to adjust
YouIncan
select
from
the▲▼
following
preset
modes Cool,
Medium
or Warm.
User. mode allows
You
canMENU
selecttofrom
thetofollowing
preset
modes Cool, Medium or Warm. Only User mode allows
Press
return
main
menu.
the
adjustment of Red, Green and Blue values.
adjustment of Red, Green and Blue values.
Aspect Ratio
Red/Green/Blue
Red
/ Green
Press
▲▼ to/ Blue:
highlight Aspect Ratio and OK to enter. A window will appear at the bottom of the screen,
In User
mode
press
▲▼ to
Red/Green
or Blue,
then
press ◄►/ to adjust
.
Inpress
user
mode,
press
/ select
to the
select
Red/Green/
Blue,
then
to adjust.
◄►
to scroll
through
following
options
to get
thepress
best fit picture
on your screen - 16:9,
Press
MENU
to
return
main
menu.
to
the
Press
MENU
to return
to the main menu.
ZOOM
1, ZOOM
2, Auto,4:3.
Aspect
Ratio
Aspect
Ratio:
Noise
Reduction
Press
▲▼/to highlight
Aspect
Ratio
andand
OK to
A window
will appear
at theatbottom
of the of
screen,
Press
to
Aspect
Ratio
OKenter.
toenter.
enter.
A window
will appear
the bottom
Press ▲▼
to highlight
highlight Aspect
Ratio
and OK
to
press ◄► to scroll through the following options to get the best fit picture on your screen - 16:9,
the
/ to
scroll
throughmodes
the following
options
to getMiddle,
the best
fit picture on your
Usescreen,
◄►to press
select from
noise
reduction
as follows:
Off, Low,
High.
ZOOM 1, ZOOM 2, Auto,4:3.
screen
16:9,
ZOOM
1,
ZOOM
2,
Auto,4:3.
Note
Noise
Reduction
Noise Reduction:
Noise
is not
available
PCOK
mode.
Press ▲▼Reduction
Aspect
Ratio in
and
Press /to highlight
to highlight
Aspect
Ratio
and to
OKenter.
to enter.
Use ◄►to select from noise reduction modes as follows: Off, Low, Middle, High.
Use / to select from noise reduction modes as follows: Off, Low, Middle, High.
Note
NOTE: Noise Reduction is not available in PC mode.
Noise Reduction is not available in PC mode.
Screen( Only available in PC mode).
Screen( Only available in PC mode)
Screen
Screen( Only available in PC mode). Auto Adjust
Horizontal Pos.
50
Vertical Pos.
50
Size
Screen
50
PhaseAuto Adjust
30
Horizontal
Pos.
Quit
Back 50
Move
MENU
Vertical Pos.
EXIT
50
Auto Adjust
Size
50
Auto
Adjust:
Select “Autopress
Adjust”and
the30unit will automatically
adjust all items.
► , the press
Select
“Auto Adjust”and
unit will ,automatically
adjust all items.
Phase
Horizontal
Pos:
Allows you to use
/
buttons
to
adjust
the
Horizontal
Position.
Horizontal
Pos.
Quit
Back
Move
Vertical
Pos:toAllows
youbuttons
to use to /adjust
buttons
to adjust the
Vertical Position.
Allows you
use ◄►
the Horizontal
Position.
Auto
Adjust
Size:
AllowsPos.
you to adjust the width of image.
Vertical
Select “Auto Adjust”and press ► , the unit will automatically adjust all items.
AllowsAllows
you to use
buttons
adjust the Vertical Position.
Phase:
you ◄►
to adjust
the to
definition.
Horizontal
Pos.
Size
MENU
EXIT
Allows you to use ◄► buttons to adjust the Horizontal Position.
Allows you to adjust the width of image.
Vertical
PhasePos.
Allows
youyou
to use
to adjust the Vertical Position.
◄► buttons
Allows
to adjust
the definition.
Size
Allows you to adjust the width of image.
Phase
Allows you to adjust the definition.
17
19
Menu Operation
SOUND Menu
SOUND Menu
SOUND Menu
Sound Mode
Standard
Sound
Treble Mode
Standard
50
50
50
Bass
Treble
050
Balance
Bass
SOUND
Off0
Auto Volume
Balance
SOUND
Surround
Sound
Auto
Volume
Off
Off
SPDIF MODE
Surround
Sound
Auto
Off
Auto
SPDIF MODE
Move
Move
MENU
MENU
Back
OK
Back
OK
Select
Select
Quit
EXIT
EXIT
Quit
Press MENU button to display the main menu, use ◄► to select SOUND menu , press OK or ▼
toPress
enterMENU
to return
to the
mainuse
menu ./
, and press
buttonmenu
display
the main
menu,
to select SOUND menu press OK or
Press MENU button to display the main menu, use ◄► to select SOUND menu , press OK or ▼
to enter
and
press
menu
return
the
main
menu.
to enter
press
menu
toto
return
toto
the
main
menu
, and
.
Sound Mode
Sound Mode
Sound Mode
Music
Sound Mode
Adjust
Sound Mode
Back
MENU
Music
EXIT
Quit
Press ◄► to select from theAdjust
following sound modes:
Movie and Sports.
Quit
BackUser, Standard, Music,
MENU
EXIT
Press MENU or OK to confirm.
Press ◄► to select from the following sound modes: User, Standard, Music, Movie and Sports.
Press Bass
/ to/Balance
select from the following sound modes: User, Standard, Music, Movie and
Treble/
Sports.
Press
MENU
OK to/Bass
confirm.
Use ▲/▼ to select the or
Treble
/Balance, and press ◄► to adjust.
Press MENU or OK to confirm.
TrebleBass
and Bass
are only adjustable in User mode.
Treble/
/Balance
Treble/
Bass
/Balance:
Use
/ /Balance,
to select and
the Treble
/Bassto/Balance,
Use
▲/▼Volume
to select the Treble
/Bass
press ◄►
adjust. and press /
Auto
adjust.
Treble
and
Bass
are
only
adjustable
in User mode.
Treble
Bass
are only
User
mode.
Auto and
sound
adjust,
pressadjustable
◄► to setinON
/ OFF
.
Auto
Volume
Surround
Sound
Auto Volume:
Auto sound adjust, press
/
to to set ON OFF
Auto
sound adjust,
press ◄►
to ◄►
set ON
/ OFF
S urround
sound settings,
press
to set
ON. / OFF .
Surround
Sound: Surround sound settings, press
Surround
Sound
SPDIF MODE
/
to set ON/OFF.
S urround
sound
settings,
setto
ON
/ OFFOff/PCM/Auto,
.
Press OK
to enter
the subpress
menu◄►
, useto▲▼
select
press MENU or OK to confirm.
SPDIF MODE
SPDIF
PressMODE
OK to enter the sub menu, use / to select Off/PCM/Auto, press MENU or OK to
Press OK to enter the sub menu , use ▲▼ to select Off/PCM/Auto, press MENU or OK to confirm.
confirm.
18
20
Menu Operation
TIME Menu
TIME Menu
I
II
I
I I
I
I
I
I
I
I
31/MayOff
Off14:25
Off Time
Time
Clock
Off
I
I
I
I
I
I
II
I
31/May 14:25
14:25
31/May
Clock
Clock
I I
I
II
I
I
I
I
I
I I
I I
TIME Menu
I
TIME
TIME
TIME
On
Time
Off
OnTime
Time
Off
Off
Off
Sleep
On
TimeTimer
Sleep
Timer
Off
Off
Off
Auto
Sleep
Sleep
Auto Timer
Sleep
On
Off
On
Time
Zone
Auto
TimeSleep
Zone
Western
OnAustralia..
Western
Australia..
Western Australia..
Time Zone
Move
Move
Move
Back
Back
MENU
MENU
MENU
Select
Select
OK
OK
Back
Select
OK
EXIT
EXIT
EXIT
Quit
Quit
Quit
Auto
clock
update:
please
select
Auto
clock
update:
please
select
DTV
totoobtains
obtains
the
time.
Auto
clock
update:
please
selectDTV
DTVto
obtainsthe
thetime.
time.
Press
MENU
button
to
display
the
main
menu,
use
◄►
to select
TIME menu
, press OK
Auto
clock
update:
please
select
DTV
to
obtains
the
time.
Press
MENU
toto
display
the
main
menu,
use
select
OKoror
or ▼
▼
Press
MENUbutton
button
display
the
main
menu,
use◄►
/ toto
selectTIME
TIME menu
menu,, press
press OK
to
to enter
enter
andbutton
pressto
menu
to return
return
to the
the
main
menu
, and
Press
MENU
display
the main
menu,
use
◄►.. to select TIME menu , press OK or ▼
to
press
menu
to
to
main
menu
,
enter, and press menu to return to the main menu.
to enter , and press menu to return to the main menu .
Clock
Clock
Clock
Clock
Date
Date
Month
Date
Month
Year
Month
Year
Hour
Year
Hour
Minute
Hour
Minute
Minute
Move
Move
Press
/
/
/
Move
Clock
Clock
◄
Clock
◄
◄
◄
◄
◄
◄
◄
◄
◄
◄
◄
◄
◄
MENU
MENU
MENU
◄
Back
Back
Back
►
►
►
►
►
►
►
►
►
►
►
►
►
►
20
20
May
20
May
May
2010
2010
13
2010
13
25
13
25
►
25
Quit
Quit
EXIT
EXIT
EXIT
Quit
to set the Date/Month/Year/Hour/Minute, press MENU to confirm and return to
Press
◄►▲▼
to set
set the
the Date/Month/Year/Hour/Minute,
Date/Month/Year/Hour/Minute, press
press MENU
MENU to
to confirm
confirm and
and return
return to
to
Press
◄►▲▼
Time
menu. to
Press
◄►▲▼
to
set
the
Date/Month/Year/Hour/Minute,
press
MENU
to
confirm
and
return
to
Time
menu.
Time menu.
Time
menu.
Off
Time
OffYou
Time
Off
Time
can set a time for the TV to turn off automatically. The Repeat mode allows the unit to be
Off
Time
You
can
a
the
TV
turn
off
Repeat
mode
allows
to
to set
turned
offfor
Once,
Mon-Sat, The
Sat-Sun
or only
Sun,
use the
/ unit
to select
Youset
can
set
a time
time
for
the Every
TV to
to day,
turn Mon-Fri,
off automatically.
automatically.
The
Repeat
mode
allows
the
unit
to be
be set
set to
to
turned
Once,
day,
Mon-Sat,
or
only
Sun,
◄►
to
select
your
preference.
You
canoff
set
a timeEvery
for
the
TV
to
turn off
automatically.
mode
allows
unitand
to
be
set to
turned
off
Once,
Every
day,
Mon-Fri,
Mon-Sat,
Sat-Sun
orRepeat
only
Sun,
useto
◄►
tothe
select
your
preference.
your
preference.
Once
theMon-Fri,
Repeat
setting
hasSat-Sun
been The
made,
press
/use
select
Hour
Minute
turned
off
Once,
Every
day,
Mon-Fri,
Mon-Sat,
Sat-Sun
or
only
Sun,
use
◄►
to
select
your
preference.
Once
the
Repeat
setting
has
been
made,
press
▲▼
to
select
Hour
and
Minute
settings,
use
Once
the Repeat
has been made, press ▲▼ to select Hour and Minute settings, use ◄►
◄►
settings,
use setting
/ to adjust.
to adjust.
adjust.
Once
the Repeat setting has been made, press ▲▼ to select Hour and Minute settings, use ◄►
to
Off Time
Time
Off
to adjust.
Off Time Once
Repeat
Once
13
Once
13
28
13
28
Repeat
Hour
Repeat
Hour
Minute
Hour
Minute
Minute
Move
Move
Move
MENU
MENU
MENU
Back
Back
Back
Press
Press MENU
MENU to
to confirm
confirm and
and return
return to
to TIME
TIME menu
menu ..
Press MENU to confirm and return to TIME menu.
Press MENU to confirm and return to TIME menu .
19
19
19
28
EXIT
EXIT
EXIT
Quit
Quit
Quit
21
On Time
Menu Operation
You can specify a time, input source, channel and volume for the TV to turn on.
Press ▲▼ to select Repeat mode and use ◄► to select your preference as above.
Use ▲▼ to select the other parameters and ◄► to adjust.
On Time
On Time
You can specify a time, input source, channelOn
and
volume for the TV to turn on.
Time
You can specify a time, input source, channel and
volume for the TV to turn on.
Press / to select Repeat mode and use / to select your preference as above.
Press ▲▼ to select Repeat mode and
use ◄►◄to select
Once your
Repeat
►preference as above.
Use
/ to
toselect
select the
theother
otherparameters
parameters and
and ◄►
/ toto
adjust.
adjust.
Use ▲▼
◄
Hour
►
12
Minute
◄Time 00
►
On
DTV
◄
►
Once
1
◄◄
►►
Hour
12
◄
Volume
30
◄
►►
Minute
00
◄
►
Move
Quit
Back
Source
DTV
◄
►
1
►
Press MENU to confirm and return to Channel
TIME menu◄
.
Volume
30
◄
►
Sleep time
Source
Repeat
Channel
MENU
EXIT
Move
Press OK to enter Sleep Time sub menu,
use ▲▼Back
to set the Quit
sleep time . You can select from the
MENU
EXIT
following Sleep times: 10, 20, 30, 60, 90, 120, 180, 240 minutes or Off to disable the Sleep time
Press MENU to confirm and return to TIME menu .
Press MENU
confirm
returnto
toconfirm.
TIME menu.
function.
Thentopress
OKand
or MENU
Sleep
timePress OK to enter Sleep Time sub menu, use / to set the sleep time. You
Sleep time:
Auto
Sleep
Press
OK to
enter
TimeSleep
sub menu,
to 60,
set 90,
the120,
sleep
time
. You
can select
can select
from
theSleep
following
times:use
10, ▲▼
20, 30,
180,
240
minutes
or Offfrom
to the
Press
◄►to
select ON/OFF
. 30, 60, 90, 120, 180, 240 minutes or Off to disable the Sleep time
Sleep
10, 20,
following
disable the
Sleeptimes:
time function.
Then press OK or MENU to confirm.
This function allows you to set your TV to automatically turn off after 10 minutes if the TV detects
function.
Then
press/ OK
MENU
to confirm.
Auto Sleep:
Press
toorselect
ON/OFF.
no signal from the inputs.
Auto
SleepThis function allows you to set your TV to automatically turn off after 10 minutes Time
zone if the TV detects no signal from the inputs.
Press
◄►to select ON/OFF .
Press
to enter
Time
Zone
menu,
use
▲▼
to set time
zone
for
your
local
area.for
Press
or
MENU
TimeOK
zone:
Press
OKyou
to enter
menu,
use turn
/ off
toafter
set time
zone
local
This
function
allows
tosub
setTime
yourZone
TV
tosub
automatically
10 minutes
ifyour
theOK
TV
detects
to confirm.
no
thePress
inputs.
signal from
area.
OK or MENU to confirm.
Time zone
OPTION Menu
OPTION Menu
Press OK to enter Time Zone sub menu, use ▲▼ to set time zone for your local area. Press OK or MENU
to confirm.
OPTION
OPTION Menu
MENU
English
Subtitle Languages
2nd
English
Audio Languages 1st
English
OSD Duration
Audio Languages 2nd
English
Subtitle Languages 1st
English
Blue Screen
Country
Subtitle Languages 2nd
English
OK
Back
Select
2nd
Audio Languages
Subtitle Languages 1st
40s
On
Australia
Default
Backlight Mode
English
Audio Languages 2nd
Restore Factory Default
English
SubtitleUpdate(USB)
Languages 1st
Software
OPTION
40S
English
Audio Languages 1st
Subtitle Languages
English
EXIT
Quit
English
Move
English
2nd
1st
English
OSD Duration
OSD Language
Move
Audio Languages
Subtitle Languages
OSD Language
MENU
OSD Duration
Back
Blue Screen
2nd
Select
OK
Country
English
OPTION
Backlight Mode
OPTION
English
40s
On EXIT Quit
Australia
Default
English
Languages 2nd
Factory
Default
Press MENU to displaySubtitle
main
menu, use
◄►to select OPTION menu ,Restore
then
press
OK or ▼ to
40S
Durationmenu, use
Press MENU to displayOSD
main
/ to select OPTION menu,Software
then
press OK or to
Update(USB)
enter, press MENU to return to main menu.
enter, press MENU to return to main menu.
OSD Language
Quit
Quit
Move
Back
Move
Back
Select
Select
OSD Language: Press OK to enter
OSD Language sub menu, use / to set OSD
language.
Press OK to enter OSD Language sub menu, use ▲▼ to set OSD language.
Audio
Language
1St/2nd:
OKuse
to enter
Audio
Language
menu,
toorset
Press MENU
to display
mainPress
menu,
◄►to
select
OPTIONsub
menu
, thenuse
press/ OK
▼ to
Audio
Language 1St/2nd to main
language.
enter, press MENU to returnAudio
menu.
Press OK to enter Audio Language sub menu, use ▲▼ to set Audio language.
OSD Language
MENU
OK
EXIT
MENU
OK
Press OK to enter OSD Language sub menu, use ▲▼ to set OSD language.
20
Audio Language 1St/2nd
Press OK to enter Audio Language sub menu, use ▲▼ to set Audio language.
EXIT
22
Subtitle Language 1st/2nd
Press OK to enter Subtitle Language sub menu, use ▲▼ to set Subtitle language.
Menu Operation
Subtitle Language 1st/2nd
OSD Duration
Press OK to enter Subtitle Language sub menu, use ▲▼ to set Subtitle language.
Press OK to enter OSD Duration sub menu, use ▲▼ to select the amount of time the OSD will remain on
OSD
Duration
the screen.
Language
1st/2nd:
Press use
OK to
enter
Subtitle
Language
subthe
menu,
/ toon
Press Subtitle
OK to enter
OSD Duration
sub menu,
of time
OSDuse
will remain
▲▼
to select
the amount
Country
set
subtitle
language.
the screen.
Displays
your country
asOK
setto
inenter
the Installation
Guide,
adjustable.
OSD Duration:
Press
OSD Duration
subnot
menu,
use / to select the amount of Country
Restore
default
yourfactory
theinOSD
remain on
screen.
Displays
countrytime
as set
the will
Installation
Guide,
not adjustable.
Press
OK to eDisplays
“ yes ” orGuide,
“ no ” , and
OK again to confirm .
nter second
use
select
Country:
your menu,
country
as ▲▼
set intothe
Installation
notpress
adjustable.
Restore factory default
Note
Factory
Default:
Press
totoenter
second
/ toOK
select
“yes”
or “no”, .
PressRestore
OK to e nter
▲▼
“ yes ” menu,
or “ no ”use
again
to confirm
second
menu,
use OK
select
, and press
Use Restore Factory Reset function with caution as it will erase all channels and return
and
press
OK
again
to
confirm.
Note
your settings to factory default.
Use Restore
Factory
Reset
function
with
caution
as it
will erase
channels
returnand return
NOTE: Use
Restore
Factory
Reset
function
with
caution,
as itall
will
erase alland
channels
your settingsyour
to factory
default.
settings
to factory default settings.
LOCK Menu
LOCK Menu
LOCK Menu
Lock Channel
Off
Set Password
Lock Channel
Block Program
Set Password
Program Guide
Block
Program
Hotel
Setting
LOCK
No Block
No Block
Program Guide
LOCK
Off
Hotel Setting
Move
MENU
Back
OK
Move menu, use
Back /
Press MENU to display main
Select
EXIT
Quit
Quit, then press OK or
Select
to select
LOCK menu
MENU
EXIT
OK
to enter.
Press MENU to display main menu, use ◄►to select LOCK menu, then press OK or ▼ to enter.
A password is required to enter the Lock settings. Enter the default password ‘0000’ to unlock the
A password is required to enter the Lock settings. Enter the default password '0000' to unlock the menu.
Pressmenu.
MENU to display main menu, use ◄►to select LOCK menu, then press OK or ▼ to enter.
Press ◄ to quite password and return to main menu.
A password
is required
to enter and
the Lock
the default password '0000' to unlock the menu.
Press
quite
password
returnsettings.
tonumbers.
main Enter
menu.
Press
► toto
clear
any
incorrectly entered
The correct numbers will need to be entered to
PressPress
◄ to quite
password
and
return
to
main
menu.
to clear
any
incorrectly
entered'Wrong
numbers.
The correct
will need
be entered
enter the LOCK
sub
menu.
The message
Password'
willnumbers
be displayed
if the to
numbers
are to
Press
► tothe
clear
anysub
incorrectly
entered
numbers.
correctwill
numbers
will need
to be
enteredare
to
enter
LOCK
menu. The
message
‘WrongThe
Password’
be displayed
if the
numbers
entered
incorrectly.
enter the LOCK sub menu. The message 'Wrong Password' will be displayed if the numbers are
Press
Menu
to
return
to
Lock
menu.
entered incorrectly.
entered incorrectly.
Press
Menu
to return
to Lock
menu.
Press
Menu
to return
to Lock
menu.
Please enter password
Please enter password
Cancel
Cancel
Clear
Clear
Lock Channel
Lock
Channel
This
setting
enables a password lock for the Program Edit function under the Channel menu.
LockThis
Channel
setting
enables
password
for the Program Edit function under the Channel menu.
Press ◄►
or OK
to turna the
lock Onlock
or Off.
This setting enables a password lock for the Program Edit function under the Channel menu.
Press / or OK to turn the lock On or Off.
Press ◄► or OK to turn the lock On or Off.
21
21
23
Menu Operation
Password
Set Password
Please enter old password
Please enter new password
Set Password
Confirm new password
Please enter old password
Cancel
Clear
Please enter new password
Confirm new password
Press OK to enter sub menu.
ss OK to enter sub menu.
Cancel
Clear
Using the numeric keys enter the old password followed by your new password.
ng the numeric
keys
enter
the
old
password
followed
by your new password.
Enter
new
password
Pressthe
OK to
enter
sub menu. again to confirm.
er the new password
againkeys
to enter
confirm.
Using the numeric
the old password followed by your new password.
Enter the new password again to confirm.
Block Program
Use Program
/ to select the channel, and press Green button to lock/unlock the channel.
ck Program IfBlock
the▲▼
channel
is the
locked
you
willpress
be prompted
a password
before
you can access
Use
to select
channel
, and
Green buttomto
toenter
lock / unlock
the channel
.
Ifthe
the channel
is locked
you will
be prompted
to enter
a password
before/you
can access
channel. .
▲▼ to selectthe
channel
, and
press
Green
buttom
to lock
unlock
thethechannel
channel.
e channel is locked you will be prompted to enter a password before you can access the cha
Hotel Setting
Hotel Setting
HotelSetting
Setting
Hotel
Hotel Lock
On
Lock Channel
On
Set Source
Off
Hotel Setting
0
Channel Number
Picture Lock
Off
Max Volume
100
Hotel LockKey Lock
Off
Lock Channel
Source Lock
On
On
Set SourceClear Lock
Off
Channel Number
0
Off
Picture Lock
Move
Adjust
EXIT
Quit
Key Lock
Off
Hotel Lock
Max Volume
100
Hotel Lock
Use
/ to select
to select
the Lock
Hotel
Lock,
use
to select On/Off.
Use ▲▼
the Hotel
, use
◄►to
select/ On/Off.
Source
Lock
On:Select
Select
Hotel
thethe
following
sub-menu.
On:
HotelLock
Lock
following
sub-menu.
Off: Unable to select Hotel Lock submenu.
Off: Unable
to Lock
select Hotel Lock submenu.
Clear
Lock Channel
Use ▲▼ to select the Lock Channel , use ◄►to select On/Off.
Loch
Channel
On: Unable
to select Channel setup in the menu.
Off: Able
Channel
the menu. use
Use
/ to select
to select
thesetup
LockinChannel,
/
On: Unable to select Channel setup in menu.
22
Off: Able to select Channel setup in menu.
Move
Adjust
to select On/Off.
EXIT
Quit
Set Source
24
Use ◄► to select the default source which appears on the screen after power on.
Channel Number(available in DTV/ATV source only)
Menu Operation
Use ◄► to select the default Channel Number which appears on the screen after power on.
Picture Lock
Set Source
Use / to select the default source which appears on the screen after power on.
On: Unable to select Picture setup in the menu.
Channel Number (available in DTV/ATV source only).
Off: Able to select Picture setup in the menu.
Use / to select the default Channel Number which appears on the screen after power on.
Key Lock
Picture Lock
Use ▲▼Use
to select
use ◄►to
Key Lock
/ the
to select
the ,Picture
Lock,select
use On/Off.
/ to select On/Off.
On: To lock&invalidate
the function
key.
On: Unable to select
Picture
setup in the menu.
Off: To unlock&enable
the function
key. in the menu.
Off: Able to select
Picture setup
Max Volume
Key Lock
/ to
Key,Lock,
use select
/ to select
On/Off.
Max the
Volume
Use ▲▼Use
to select
theselect
use ◄►to
a volume
as maximum.
On:
To
lock
and
invalidate
the
unction
key.
Source Lock
To unlock
enable
unction
Source
Lockthe
Use ▲▼Off:
to select
the and
, use
OK keykey.
enter , select DTV/ATV/YPBPR/PC/HDMI1/HDMI2/AV
Max
Volume
/MEDIA source on/off.
Use / to select the Max Volume, use / to select a volume as maximum.
On: Make the source can not be selected.
Source Lock
Off: Make the source available.
Use / to select the Source Lock, use OK key to enter, select DTV/ATV/YPBPR/PC/HDMI1/
Clear Lock
HDMI2/AV/MEDIA source on or off.
Clear Lock
Use ▲▼On:
to Make
select the
the source
usebe
OK
key clear.
can ,not
selected.
Off: Make the source available.
Clear Lock
Use / to select the Clear Lock, use OK key to clear.
Use ▲▼ to select the Picture Lock, use ◄►to select On/Off.
Input Source
INPUT SOURCE
Input Source
DTV
ATV
YPBPR
PC
HDMI1
HDMI2
AV
MEDIA
Move
OK
Select
Change
Change
inputInput
EXIT
Quit
Press source
to display
the source
/ select
to select
input
source,
press
OKtoto
Press source
buttonbutton
to display
the source
menumenu.
. UseUse
▲▼ to
the the
input
source
, press
OK
confirm.confirm.
23
EPG and Channel List Menu
Menu Operation
25
Program EPG
EPG and Channel
List Menu
31 May 2010 13:00-18:00
TIME
Use ◄► to select
31 May 13 : 36
between TIME and
EPG and Channel List700Menu
BBC Radio 1 Edith Bowman
CHANNEL modes
The best rock thranks including the 3
form 1S.
702 BBC Radio 2 Steve Wright in the Afternoon
This is a list of
programs that
w will appear,are
use
◄►
Use
scheduled
to
Use
◄►totoselect
select
ND, TIME, OPTION
be
shown TIME
byTIME
theand
between
between
and
broadcaster.
d above.
CHANNEL
modes.
CHANNEL modes
-u window, TIME
or press
704 BBC Radio 4 Afternoon Play: JACK's Love
721 heat
Uptemp party Pop
TIME
31 May 2010 13:00-18:00
31 May 13 : 36
700 BBC Radio 1 Edith Bowman
The best rock thranks including the 3
form 1S.
702 BBC Radio 2 Steve Wright in the Afternoon
703 BBC Radio 3 Afternoon on 3
1/1
This is a list of
704 BBC Radio 4 Afternoon Play: JACK's Love
programs that
Quit
Move
Select
721 heat
Uptemp party Pop
This
is scheduled
a list of
are
to
be shown
by the
programs
that
Move
arebroadcaster.
scheduled to
-- select programme .
UseTIME
▲▼ to
OK
s, then
tuning.
English
Australia
ATV+DTV
EXIT
Quit
ing.
broadcaster.
EXIT
exit EPG.
Index
EXIT
be shown by the
e
Detailed information
for the highlighted
program.
Program EPG
703 BBC Radio 3 Afternoon on 3
Index
RECORD
Record
Remind
Schedule
Remind
Schedule
Detailed information
information
Detailed
for
forthe
thehighlighted
highlighted
program.
program.
1/1
Move
OK
Select
EXIT
Quit
Index
Index
RECORD
Record
OKMove
Use
▲▼
to select programme
.
View
the
highlighted
programme.
Move: Use
/
EXIT
Index
EXIT: exit EPG.
to select programme
exit to
EPG.
switch
type option.
OK: View the highlighted programme.
OK
Record
Index: switch to type option.
View the highlighted programme.
Press REC button to enter a window to book a recording, see page 34 for details.
Record: Press REC button to enter a window to book a recording, see page 34 for details.
Index
Schedule:
Press
YELLOW key to show a list of scheduled recordings.
switch
to type
option.
Press
YELLOW
key
to show
a listtoofenter
scheduled
recordings.
Remind:
Press
GREEN
button
a sub window
to book a reminder.
Record
Remind
You
can select
theachannel,
repeat
minute
and
hour,
and month using Press REC
button
to enter
window to
book mode,
a recording,
see
page
34 date
for details.
Press GREEN
button
to enter
a sub window to book a reminder.
the
/
/
/
buttons.
Schedule
o begin auto
tuning.
Schedule
You can select the channel, repeat mode, minute and hour, date and month using the ◄► ▲▼
Press YELLOW key to show a list of scheduled recordings.
buttons.
Tuning
When a reminder has been set and the time arrives, a window will appear on the Remind
When
a reminder has been set and the time arrives, a window will appear on the display and the
ation
display
and
the
channel
will
change
seconds.
Presswill
GREEN
button
to10
enter
a sub
window
to after
book 10
a reminder.
channel
change
after
seconds.
t
You
can
select
thealso
channel,
repeat
mode,
minute
and hour,
date
and month
You
can
intercept
and
confirm
the
change
by◄.
pressing
. using the ◄► ▲▼
You
can
also
intercept
and
confirm
the
change
by
pressing
de
buttons.
t
stem
When a reminder has been set and the time
arrives,
a window will appear on the display and the
Reminder
Setting
channel will change after 10 seconds.
◄ - 2 ABC TV Melbourne + ►
Quit
Select
You can also intercept and confirm the change by pressing ◄.
12
◄
►
Mode
L menu , press OK or ▼
00
◄ Setting
►
MinuteReminder
DTV
◄
Hour
◄ - 2 ABC TV Melbourne +►
►
1
◄◄
►
Date
12
►
Mode
nu is disabled while in
30
◄◄
►
Month
00
►
Minute
OK
EXIT
Favourite List
Hour
Move
Date
Month
◄
◄
◄
Select
OK
DTV
Press FAV button to display the FavoriteMove
ChannelSelect
List.
MENU
1
30
Favourite List
Press FAV button
Favourite
List to display the Favourite Channel List.
OK
24
Press FAV button to display the Favorite Channel List.
24
MENU
►
►
►
Back
Back
26
Channel List
Menu Operation
Press OK button to display a list of tuned channels.
The status of the channels (Skip/Lock/Favourite) will also be displayed, see below.
Channel
ChannelList
List
Press
to to
display
a list
of of
tuned
channels.
Channel
PressOK
OKbutton
button
display
a list
tuned
channels.List
The
status
of of
thethe
channels
(Skip/Lock/Favourite)
will
also
bebe
displayed,
see
5 Five
The
status
channels
(Skip/Lock/Favourite)
will
also
displayed,
seebelow.
below.
DTV
6 abc1
DTV
7 abc2
Channel
List
DTV
abc3
5 8Five
DTVDTV
abc5
6 9abc1
DTVDTV
C-01
7 1abc2
DTVATV
2C-01
8 2abc3
DTVATV
3S-02
9 3abc5
DTVATV
4S-03
1 4C-01
ATVATV
2 2C-01
ATV
3 3S-02
ATV
Move
OK
4 4S-03
Select
EXIT
Quit
ATV
Move
Select
Quit
Multimedia(USB) Menu
OK
EXIT
Multimedia (USB) Menu
Multimedia main menu style:
Multimedia main menu style:
Multimedia(USB) Menu
Multimedia main menu style:
Discs
Disc:C
Multimedia
Discs
PHOTO
USB Status
Multimedia
Inserted USB
device
info
USB
Status
Disc:C
PHOTO
USB 2.0
Move
MENU
Menu
OK
Select
Operation
USB 2.0
Move
MENU
Menu
OK
Select
Inserted
USB
USB
Status
USB Status
info
If a device
compatible
USB is attached the logo will appear blue. If not USB is attached the logo will be grey.
If aOperation
compatible USB is attached the logo will appear blue. If not USB is attached the logo will be
Multimedia style
grey.
Choose
from the menu across the top of the screen which file type you would like to play: Photo,
USB
Status
Multimedia
style
Movie or
Text.
IfMusic,
a compatible
USB
is attached the logo will appear blue. If not USB is attached the logo will be grey.
Choose from the menu across the top of the screen which file type you would like to play: Photo,
DISC
(HDD)
Multimedia style
Music,the
Movie
or Text.
Shows from
inserted
HDD
Discs.
assigned
a letter
from
C onwards.
Choose
the menu
across
theEach
top ofdisc
theisscreen
which
file type
you
would like to play: Photo,
DISC
(HDD)
Music, Movie or Text.
Shows the inserted HDD Discs. Each disc is assigned
a letter from C onwards.
25
DISC (HDD)
Shows the inserted HDD Discs. Each disc is assigned a letter from C onwards.
27
Menu Operation
Inserted USB device info
Displays USB version of the device that is attached, for example if a USB 2.0 device is attached,
2.0Inserted
will be displayed.
When
USB device
infono device is attached it will display 'No Device'.
Displays USB version of the device that is attached, for example if a USB 2.0 device is
Disc
Show
the current
disc.
attached,
2.0 will
be displayed. When no device is attached it will display ‘No Device’.
Operation guide
Operational
buttons
on thedisc.
remote ◄► ▲▼ , Menu and OK.
Disc: Show
the current
Multimedia main board keypress instruction:
Operation guide: Operational buttons o n the remote
/
/
/ , Menu and OK.
The follows only list MM page and other relavant function, Menu, sleep and other systerm
function
is not included.
Multimedia
main board keypress instruction:
◄ /►
The follows only list MM page and other relevant function, Menu, sleep and other system
Move
Focus to
left/right,
it can circle move.
function
is not
included.
▲/▼ /
: Move Focus to left/right, it can circle move.
/ : Turn up/down.
Turn up/down.
OK/Enter
OK/Enter:
Enter
submenu.Enter submenu.
PHOTO
PHOTO
Multimedia PHOTO’s submenu layout:
Multimedia PHOTO’s submenu layout:
1/2
C:\
Page
Disc
File folders in disc,
press ok to enter
Picture overview
Return
UP.png
200*200
1.bmp
1
Preview
2
Resolution 1024x768
Size
200KBytes
Date
2010 / 08 / 08
08 / 23 / 22
Time
2. bmp
Picture
information
Delete Current Filt
Add/Remove all
OK
Full Screen
Move
MENU
Menu
Add/Remove to playlist
EXIT
Quit
Page: Indicates the total number of pages containing files. example as per picture - ‘1/2’ Page
represents
page 1ofofpages
2. containing files. example as per picture - '1/2' represents page
Indicates the
total number
1 of 2.
Picture
list: Use / / / to scroll through the picture list. Press OK to select the picture, Picture
list
U se ◄► ▲▼ to scroll
the picture
Press OK to select the picture, a tick will appear on the file.
a tickthrough
will appear
on thelist.
file.
Press
picture
in to
fullview
screen.
PLAY to view
Press
PLAY
picture in full screen.
Preview window
Displays
a preview
of the
highlighted
picture
in highlighted
the Picture list.
Preview
window:
Displays
a preview
of the
picture in the Picture list.
26
28
Menu Operation
Slide Show
When in Picture List mode you can select multiple pictures to be viewed as part of a Slide Show.
▲▼ to scroll through the list, press OK when the desired pictures are highlighted.
Use
◄►
Slide
Show
If you wish to highlight all pictures, press the GREEN button. Press the RED button to de-select all
When in Picture List mode you can select multiple pictures to be viewed as part of a Slide
pictures. Press the PLAY button to enter Slide Show mode, the pictures will scroll after
Show.
/ / to scroll through the list, press OK when the desired pictures are
Slideapproximately
ShowUse / 5 seconds.
When highlighted.
in Picture List mode you can select multiple pictures to be viewed as part of a Slide Show.
▲▼
Use ◄►
to scroll
throughallthe
list, press
OKthe
when
the button.
desired Press
pictures
If you
wish
to highlight
pictures,
press
GREEN
the are
REDhighlighted.
button to deIf you select
wish toallhighlight
pictures,
press
the GREEN
Pressmode,
the RED
towill
de-select
pictures.allPress
the PLAY
button
to enterbutton.
Slide Show
the button
pictures
scroll all
pictures.
Press
the
PLAY
button
to
enter
Slide
Show
mode,
the
pictures
will
scroll
after
after approximately 5 seconds.
approximately 5 seconds.
A
Repeat ALL
90
Play List
Music
Rotate
Info.
90
Rotate
Zoom In
Zoom Out
Exit
Exit playing,enter previous menu.
Full screen playing of photos.
A
90
Repeat ALL
Music
Play List
Info.
Rotate
90
Rotate
Zoom In
Zoom Out
Exit Stop playing,enter list menu.
EXIT: Exit playing,
Exit playing,enter
previousenter
menu.previous menu.
screen
playing of photos.
Play: Full
previous
file.
Full screen
playing
of photos.
: Stop
playing,
enter list menu.
Play: Play
next previous
file.
file.
Stop playing,enter
list menu.
Repeat
: Play next
file.
Press
once
to repeat
pressonce,
againpress
to repeat
three times
disable the repeat function.
Repeat:
Press
once once,
to repeat
againalltophotos,
repeatpress
all photos,
presstothree
Play previous file.
Rotate times to disable the repeat function.
Clockwise/
counter clockwise
pictures.turn picture.
Rotate:
/ counterturn
clockwise
Play next
file. Clockwise
Repeat
MUSIConce, press again to repeat all photos, press three times to disable the repeat function.
Press once
to repeat
MUSIC
Rotate
Multimedia MUSIC submenu layout.
Multimed i a MUSIC submenu layout.
Clockwise/
counter
turn
pictures.
When
selectclockwise
songs
in the
list,
press
OK OK
to show
the the
songs
preview,
as follows:
When
selected
songs
in the
list,
press
to show
songs
preview,
as follows:
1/2
C:\
MUSIC
Disc
Page
Multimed i a MUSIC submenu layout.
When selected songs in the list, press OK to show the songs preview, as follows:
Return
2...
1/2
C:\
Disc
EQ
File window
Return
2564
2...
Asdkj.mp3
Dkj.mp3
200-200 2asd-200
Put.mp3
File window
EQ
2564
Full Screen
Put.mp3
Preview
200-200 2asd-200
Album:
Title:
Bit rate:
Artist:
Sampling:
Year:
Size:
Bounce
Asdkj
48K
Sarah
20K
2008
600KBytes
Page
Files
Preview
information
Delete Current Filt
Asdkj.mp3
Dkj.mp3
Move
MENU
27
Album:
Title: OK
Bit rate:
Artist:
Menu
Sampling:
Year:
Size:
Bounce all
Add/Remove
Asdkj to playlist
Add/Remove
48K
Sarah
20KEXIT Quit
2008
600KBytes
Delete Current Filt
Add/Remove all
Files
information
29
Menu Operation
MUSIC submenu equip description:
Page MUSIC submenu equip description:
Show pages.
Page:
Show pages.
Preview
window
Music picture.
Preview window: Music picture.
Files information: Show songs name and size etc.
Files information
Show songs name and size etc.
MUSIC playing condition and keys function:
MUSIC
playing
is the menu
just
like playing
software in PC, mainly have playlist, basic
MUSIC
playing
conditon
and
keys
function
processing
sign,
guide part,as
follows:
MUSICinformation,
playing is the
menu just
likeoperation
playing software
in PC,
mainly have Playlist、basic
information, processing sign, operation guide part,as follows:
Songs name
Screen Mute
AUD.MP3
Songs infor
Album: Govergirl
Title: Far Amay From Home
Artist: Groove Goverage
Bit Rate:
96k
Sampling:
48k
Year: 2002
529KBytes
Size:
Songs list
AUD.MP3
Sanple.MP3
AUD_2.MP3
MUSIC image
1/1
Remove
Remove all form playlist
00:01:00/01:00:45
Operation guide
Repeat ALL
Goto Time
Songs name
CurrentSongs
songsname:
name.Current songs name.
MUSIC
image
MUSIC
image: One image used to sign MUSIC.
One image used to sign MUSIC.
Songs list: Songs marked in Browser,from the top files on, orders by letters.
Songs list
Playing time: Show playing time and in total,such as 00:01:23/00:04:56 format.
Songs marked in Browser,from the top files on, orders by letters.
Operation
Playing
time guide: Show current operation guide.
Show playing
time sign:
and in
total,such
00:01:23/00:04:56
format.
Processing
Show
currentas
procession
time and rate.
Operation
guide
OK/ENTER: Play selected files.
Show current operation guide.
EXIT: Exit MUSIC playing menu.
Processing
sign
/ / procession
/ : Scroll time
through
Show current
andsongs
rate. on file list.
OK/Enter: Stop playing.
Play selected files.
Exit
/
: Play previous / next file.
Exit MUSIC playing menu.
▲▼◄►
Scroll through songs on file list.
Stop playing.
/
Play Time
30
Menu Operation
Fast forward and fast reverse.
Fast forward and fast reverse.
Repeat
Repeat
Repeat playing,can choose repeat 1, repeat all, and disable repeat mode.
/ : Fastchoose
forwardrepeat
and fast
reverse.
Repeat playing,can
1, repeat
all, and disable repeat mode.
Repeat: Repeat playing,can choose repeat 1, repeat all, and disable repeat mode.
MOVIE
MOVIE
MOVIE
Video format:
AVI e t c.AVI etc.
Video format:
Video format:
AVI e t c.
themenu
MOVIEand
menu
andthrough
scroll through
the
files using
/ keys.
/ the keys.
Enter theEnter
movie
scroll
the files
using
the ◄►/▲▼
Enter the movie menu and scroll through the files using the ◄► ▲▼ keys.
1/2
1/2
C:\
C:\
File list
File list
Return
Return
200* 200
200* 200
2
2
Preview window
Preview window
3
3
Resolution: 800x336
Audio Track: 800x336
1/ 1
Resolution:
Subtitle:
Audio
Track: 1/ 1
Artist:
Subtitle:
Prpgram:
Artist:
Size:
122311 KBytes
Prpgram:
Size:
122311 KBytes
File information
File information
Delete Current Filt
Delete
Current
Add/Remove
allFilt
Full Screen
Full Screen
Move
Move
MENU
MENU
OK
Add/Remove to
all playlist
OK
Add/Remove to playlist
Menu
Menu
EXIT
EXIT
Quit
Quit
Press OK
to select
filethe
and
view
preview
as above.
Press
OK to the
select
filetoand
to aview
a preview
as above.
Press OK to select the file and to view a preview as above.
Press PLAY
to
viewtothe
filethe
in file
full in
screen.
Press
PLAY
view
full
screen.
Press PLAY to view the file in full screen.
00:00:00/00:50:00
00:00:00/00:50:00
A/B
Repeat
Repeat
Repeat ALL
SetA
A/B
Play List
Info.
Slow
Step
Goto Time
Zoom In
Repeat ALL
SetA
Play List
Info.
Slow
Step
Goto Time
Zoom In
Can choose repeat1 , repeat all , repeat none .
Can choose repeat1 , repeat all , repeat none .
Set A/BRepeat: You can choose repeat 1, repeat all, repeat none.
Set A/B
Set A/B:
Set A/B circle playing.
Set A/B circle
playing.
Set A/B circle playing.
File listFile list: You can scroll through the file list using
File list
/
/
/
. Press OK to select a file andthe
view
preview,
also
selectOK
multiple
filesato
beand
played
ina preview,
▲▼
You can scroll through
filealist
usingyou
◄►can
. Press
to select
file
view
You can scroll through the file list using ◄► ▲▼ . Press OK to select a file and view a preview,
sequence.
view selected
file in full screen.
you can also select
multiplePress
filesPLAY
to betoplayed
in sequence.
you can also select multiple files to be played in sequence.
Press PLAY
to Larger
view selected
full screen.
NOTE:
files mayfile
takeinlonger
to load, please wait for the file to load.
Press PLAY to view selected file in full screen.
Note
Note
Some files may not play even though they are the correct format.
Larger files may take longer to load, please wait for the file to load.
Larger files may take longer to load, please wait for the file to load.
Some files may not play even though they are the correct format.
Some files may not play even though they are the correct format.
31
Menu Operation
Info
Displays the highlighted file's information including resolution, audio track, subtitle, artist and size.
Info
Info: Displays the highlighted file’s information including resolution, audio track, subtitle,
Goto
Displays the highlighted file's information including resolution, audio track, subtitle, artist and size.
artist
and size.
This
function
allows you to jump to a preset time during playback. Press GOTO, a window will
Goto
appear
timeallows
in hour
minutes
and
as follows
Goto:displaying
This function
you
to jump
to seconds
a preset time
during00:00:00.
playback. Press GOTO, a
This function
allows
you to
jump
to a preset
time
playback. Press GOTO, a window will
Enter
the time
would
like
to jump
theduring
numeric
window
willyou
appear
displaying
timetoinusing
hour minutes
and keys.
seconds as follows 00:00:00.
appearOK
displaying
time in hour minutes and seconds as follows 00:00:00.
Press
to time
confirm.
Enter the
you would like to jump to using the numeric keys.
Enter the time you would like to jump to using the numeric keys.
Press
confirm.
Press
OKOK
toto
confirm.
TEXT
TEXT
TEXT
C:
1/2
Pet
C:
1/2
Puppy Linux
Return
2...
200-200 2asd-200
Return
2...
200-200 2asd-200
EQ
2564
EQ
2564
jack.text
jack.text
jack1.text
Pet
Puppy Linux
Make
jack.txt
Size:
Make
Size:
60KBytes
Remove all form playlist
jack1.text
put.text
60KBytes
jack.txt
Add all to playlist
OK
Add/Remove to playlist
Remove all form playlist
Full Screen
Move
put.text
MENU
Menu
Add all to playlist
OK
EXIT
Quit
EXIT
Quit
Add/Remove to playlist
Move
Menu
Full Screen
Choose TEXT files, press OK
and it shows the
above frame.
MENU
Chose TEXT files, press OK and it shows the above frame.
Press
play
to to
start
full
screen
playing
as
Press
play
start
full
screen
playing
asfollows:
follows:
Choose
TEXT
files,
press
OK and
it shows
the above frame.
Press play to start full# Cscreen
playing as follows:
zech 0
#Danish 1
#German 2
#
#C
Ez
ne
gc
eh
l s0h 3
#
#D
Sa
pn
ai
ns
ih
s h1 4
#
G
e
r
m
#Greea
k n5 2
#
E
n
g
e
l
en_strs
_h
P i3c t u r e _ T e x t . 0 = O B R A Z
#
eS
np
_a
sn
ti
rs
_h
P i4c t u r e _ T e x t . 1 = B I L L E D E
#e Gn r_ es et kr _5P i c t u r e _ T e x t . 2 = B I L D
ee nn __ ss tt rr __ PP ii cc tt uu rr ee __ TT ee xx tt .. 03 == OP BI RC AT ZU R E
en_str_Picture_Text.1=BILLEDE
en_str_Picture_Text.2=BILD
en_str_Picture_Text.3=PICTURE
Prev page
Prev Page
Next Page
Prev.
Next
Stop
Music
Play List
Info.
Prev Page
Next Page
Prev.
Next
Stop
Music
Play List
Info.
Play previous page.
Prev
Next page
page
Play
previous
page.
Prev
Page:
Play previous page.
Play
next
page.
Next
page
Next
Page: Play next page.
Prev.
Play previous
next page.
Play
files.
Prev.
: Play previous
files.
Prev.
Next
Next: Play next files.
Play next
previous
Play
files.files.
Next
Play next files.
30
32
Menu Operation
STOP: Stop playing and Exit to browser menu.
Playlist: Show play list.
Stop Info: Displays the current file’s information including file name and size.
S top playing and Exit to Browser menu .
Playlist
PVR Menu
Show play list.
Info
PVR function is only available for DTV,includes Record,Time shift and Playback function.
Displays the current file's information including file name and size.
NOTE:
• When PVR function is in progress, please don’t unplug the power and the external
PVR menu
USB device at will.
• When PVR function is standby, the power indicator will blink with red and green
PVR function is only available for DTV,includes Record,Timeshift and Playback function.
consecutively.
Note
• When PVR function is active, the power indicator will blink with green.
When PVR function is in progress, please don’t unplug the power and the external USB device at will.
• function
Before start
recording
program,
please
external
device is
is standby,
the apower
indicator
willmake
blink sure
with the
red and
greenUSB
consecutively.
When PVR
connected.
When PVR function is active, the power indicator will blink with green.
recording,
if theplease
available
storage
space
becomes
theisrecording
will be
start While
recording
a program,
make
sure the
external
USBlow,
device
connected.
Before •
if the available
storage space becomes low, the recording will be automatically
While recording,
automatically
stopped.
stopped.
PVRSystem
File System
PVR File
PVRCHANNEL
from CHANNEL
as follows:
Enter PEnter
VR from
menu,menu,
as follows:
PVR File Syetem
Select Disk
C:
Check PVR File Syetem
Start
USB Disk
Format
Time Shift Size
Speed
Move
OK
Select
MENU
Back
USB Disk: If a compatible USB device is attached, this will indicate “PASS”. If no device is USB Disk
it will appear
grey.
If a compatible
USBattached,
device is attached,
this will
indicate 'PASS'. If no device is attached it will appear grey.
Format:
You
USB
device
will
need
to
be formatted before it can be used for PVR functions.
Format
NOTE:
Formatting
device willbefore
erase itany
on the
device, back up all Your USB
device
will needatoUSB
be formatted
canexisting
be useddata
for PVR
functions.
existing data. Larger devices will take longer to format.
Note Time Shift Size: Can’t be chosen. After check PVR File System, it means the USB passed Formatting a USB device will erase any existing data on the device, back up all existing data.
Master Format and can be used at Time Shift Space, the size is chosen by Larger devices will take longer to format.
clients when doing format.
Time Shift
Size
Speed:
Displays the speed of the attached USB device.
Can’t be chosen. After Check PVR File System,it means the USB passed Mstar Format and can be used
At Timeshift space,the size is choosen by clients when doing format.
Speed
Select Disk
33
Choose the drive for PVR, C: is the default drive.
Select Disk
Menu Operation
USB
0
C:
Disk
Select Disk
Select Disk
Choose
the
drive
for
PVR,
C:
is
the
default
drive.Move
Choose
drive for PVR, C: is the default drive.
Select the
Disk
Select Disk
OK
Select
Choose
Choose the
the drive
drive for
for PVR,
PVR, C:
C: is
is the
the default
default drive.
drive.
Check PVR File System
Select Disk
Disk
Select
Disk
Press 'OK' button to check ifUSB
yourSelect
USB device
is ready for PVR functions. If the disc is formatted
0
00 the disc is not ready it will display 'FAIL'.
and compatible it will display
'SUCCESS', ifC:
USB
Disk
USB
Disk
Disk Move
OK
Select
FileSelect
System Size
Move
Move
Check PVR File System
C:
C:
OK
OK
Select
Check
PVR
File
System
Press
'OK'
button
check if your USB device is ready for PVR functions.
If the disc is formatted
Check
PVR
File
Check
PVR
FiletoSystem
System
Hi Speed FS
PVR File System Type
Press
‘OK’
button
tocheck
check
if'SUCCESS',
you
USB
device
is ready
for PVR
functions,
If the
disc is formatted
and
compatible
it
will
display
if the
is for
not
ready
it will
display
Press
ifif your
USB
device
is
ready
functions.
IfIf the
disc
is
Press 'OK'
'OK' button
button to
to
check
your
USB
device
isdisc
ready
for PVR
PVR
functions.
the'FAIL'.
disc
is formatted
formatted
File is
System
Sizeit will display
and
compatible
display
'SUCCESS',
ififPVR
the
not
ready
and
it
will
displays
‘SUCCESS’
, ifdisc
the
disc
not
ready,
itALLwill'FAIL'.
display ‘FAIL’.
and compatible
compatible itit will
will
display
'SUCCESS',
the
disc
is
notis
ready
it
will display
'FAIL'.
File System Size
SD104 Mins
File
System
Hi Speed FS
File
System
Size
PVR File
System
Type Size
HD
29 Mins
PVR
Size
PVR File
File System
System Type
Type
Hi
HiSpeed
Speed
FS
ALL FS
PVR
PVR File
File System
System Size
Size
ALL
ALL
Move
OK
SD104 Mins
Channel - Recorded List Move
HD
Mins
HD 29
29
Mins
Select
OK
Select
Select
OK
OK
Channel - Recorded List
MENU
Back
SD104
HD
29 Mins
SD104
Mins
Move
To view a list of recorded programs.
Move
Channel
---Recorded
To
view a list
of recordedList
programs.
Channel
Recorded
List
Channel
Recorded
List
To
view
programs.
To
alist
listof
ofrecorded
recorded
programs.
Toview
view aa
list
of
recorded
programs.
Select
MENU
Back
MENU
MENU
Back
Back
Recorded List Programme
8 Simples Rules
Recorded List Programme
BeforeProgramme
Winter Comes
Recorded
List
Recorded
List
Programme
8 Simples Rules
8
Rules
Before
8 Simples
Simples
Rules
Before
Winter
Comes Winter Comes
Before
Comes
Before Winter
Winter
Comes
Before
Winter
Comes
Love
Comes Softly
Before
Winter
Comes
Before
Winter
Comes
Love
Comes
Softly
Love
Love Comes
Comes Softly
Softly
OK
Delete
INFO
Delete
INFO
INFO
INFO
Delete
Select
Delete
INFO
OK
Index
INFO
Index
INFO
Select
INFO
Index
Index
Title
Title
Index
Select
Index
Select
Recorded
List.
Title
Title
Recorded
List.
Ordering
Recorded
List.
Recorded
List.
Title:
Recorded
List.
Ordering
Show
in title right,means the current ordering way,Index key can switch option:
Ordering
Ordering
Ordering:
Show
in
title
right,
means
theorders
current
ordering
way,
Index
keyswitch
can switch
option: Show
in
title
right,means
the current
ordering
way,Index
key
can
option:
Program
me ->
Channel
->the
Time,which
make
by programme
name,
channel
order
and
record
Show
right,means
current
way,Index
key
option:
Show in
in title
title
right,means
the
current ordering
ordering
way,Index
key can
can switch
switch
option:
Program
me
->
Channel
->
Time,which
make
orders
by
programme
name,
channel
order
time.
me
->
Channel
->
Time,which
make
orders
by
programme
name,
channel
order
and
record
Program
Programme
->
Channel
->Time,
which
make
orders
by
programme
name,
channel
and recor
Program me -> Channel -> Time,which make orders by programme name, channel order and record
time.
time. order and record time.
time.
Mark
OK
OK
Index
Index
Show
current condition,recoreded programme shows no mark, if shows means recording,and
Mark
Mark
Mark
ifShow
it shows
means on the playing,if
Focused,it
shows
color
it recording,and
is gray.
Show
current
programme
shows
no
ifif shows
current,itcondition,recoreded
condition,recoreded
programme
shows
no mark,
mark,image,otherwise
shows means
means
recording,and
Show
current
condition,recoreded
shows
shows means
means recording,and
Mark:
Show
current
condition,
recordedprogramme
programme
shows no
no mark,
mark, if shows
ifif itit shows
shows ,it
,it means
means on
on the
the playing,if
playing,if Focused,it
Focused,it shows
shows color
color image,otherwise
image,otherwise itit is
is gray.
gray.
if it recording,
shows ,it
means
on the playing,if
Focused,it
shows
color image,otherwise
it is gray.
and
if it shows
, it means
on
the
playing,
if
Focused,
it
shows
color
image,
32
otherwise it is gray.
32
32
32
The programme name is construct by channel number and record channel number.
Operation guide
Show the current available operation.
▲▼
34
Up and down to move Focus to select programme.
Menu Operation
◄►/OK/Enter
Close/pop out the programme instruction.
Programme name: The programme name is construct by channel number and record Info/Display
channel
number.
Pop out
or close the programme
instruction.
Operation guide: Show the current available operation.
/ : Up and
down to move Focus to select programme.
Delete Focused
programme.
/ OK/Enter : Close/pop out the programme instruction.
Info/Display: Pop out or close the programme instruction.
DELETE: Delete Focused programme.
DELETE
PVR PVR
–Record
Mode
- Record Mode
Recorded Mode
09 Jun 18:14
20 ABC HDTV
Mode
Once
Start Time
Minute
00
Hour
00
Month
Jan
2010 / 05 / 04
Date
End Time
Minute
00
Hour
00
Month
Jan
2010 / 05 / 04
Date
Move
OK
Select
MENU
Back
Press MENU to display main menu, use ◄►to select CHANNEL menu, then press ▼ choose the
recorded mode.
Press MENU to display main menu, use / to select CHANNEL menu, then press
the recorded mode.
Shows current channel name then press ◄► to choose the channel you would like.
Title
Mode
choose
Title: Shows
current
channel ->
name
then press
/ to->choose
Press ◄►to
s witch
order:Once
Everyday
-> Weekly
Auto. the channel you would like.
Mode: Press / to show order: Once -> Everyday -> Weekly -> Auto.
Start Time
StarttoTime:
/ recording
to selecttime.
the start recording time.
Press ◄►
selectPress
the start
End Time: Press / to select the end recording time.
End Time
After theselect
abovethe
settings,
the machine
Press ◄►to
end recording
time.will display a list.
After the above settings, the machine will appear a list will burn.
33
VR functions. If the disc is formatted
Select
eady
it willDisk
display 'FAIL'.
0
35
C:
Move
ed
FS
OK
L
Menu Operation
Select
– Recorder
Schedule
vice is PVR
ready for
functions.
If the disc is formatted
PVR -PVR
Recorder
Schedule
Menu
and
function
, if the disc is not ready it will display 'FAIL'.
Menu and function
k
le System Size
System Type
Hi Speed FS
System Size
ALL
Schedule List
Time
Date
Programme Title
Channel Name
19:28-20:20
Satos Jun
New Tanks
2 ABC TV
Mode
A U TO
Result
SD104 Mins
mme
HD 29 Mins
e
OK
Select
MENU
Back
18:14 09th Jun
Move
Delete
MENU
Back
EXIT
Quit
ded List Programme
NoteNOTE:
ples Rules
List
timer recording
start according
to date
time priority.
1.List1.
timer
recording
will startwill
according
to date and
timeand
priority.
2.
2.Newly
e Winter Comes
New items
the
end of the list.
added
itemswill
willbe
beadded
last onto
the
listed.
3.It enter
the
menuthe
when
recording,Focus
on Focus
currenton
recording
plans.
3. It
enters
menu
when recording,
current recording
plans.
e Winter Comes
Comes Softly
Menu: Exit Recorder Schedule List menu, enter PVR menu, Focus on Recorder Schedule List.
Menu
Move: Move
FocusList
up menu,enter
and down. PVR menu,Focus on Recorder Schedule List;
Exit Recorder
Schedule
y can switch
option: Delete Focus items.
MoveDelete:
ramme Move
name,
channel
order
and record
Focus
upmenu.
and
down;
Exit:
Exit
Delete
INFO
Delete
Focus
items;
PVR
Shortcut
function
INFO
Index
Exit :means
rk, if shows
recording,and
Enter Record
mode.
Exit menu;
lor image,otherwise
is gray.
: Enterittime
shift mode.
Index
PVR shortcut function
NOTE:
ering way,Index
key can switch option:
ake orders by
programme
name, channel
order
and
record
Record
and Recorded
List can be
enter
from
PVR menu.
Enter Record mode;
Record: Record menu includes two kind, one is Full Mode, the other is Simple Mode. At
simple mode, there is only power indicator blinking but no operation menu display.
EnterThey
Timeshift
mode;
amme shows
no mark,
if shows
recording,and
can switch
by /means
EXIT key.
ocused,it
shows
color mode,
image,otherwise
it isshows
gray.still.
At Record
Record menu
Note
Record and Recorded List can be enter from PVR menu.
Record
32
Record menu includes two kind, one is Full Mode,the other is Simple Mode. At Simple mode, there
is only power indicator blinking but no operation menu display.
They can switch by /EXIT key.
At Record mode, Record menu shows still.
mme
36
Menu Operation
TheThe
details
details
is as
is follows:
as follows:
The details is as follows:
The details is as follows:
FullFull
Mode:
Mode:
Full Mode:
Full Mode:
Max Recording
Max Recording
Time [0000:10:20]
Time [0000:10:20]
Recording
Recording
Time [00:00:20]
Time [00:00:20]
Recording Time [00:00:20]
PlayPlay
5 Five
5 Five
FB FB
Play
FF FF
FB
5 Five
Max Recording Time [0000:10:20]
Pause StopStop
PrevPrev NextNext Pause
Pause
Stop
Prev
Next
FF
Before
Before
Winter
Winter
Comes
Comes
Before Winter Comes
y can switch option:
Channel
Channel
name
name
andand
Programme
Programme
name
name
ramme name, channel order
and record
Channel
name and Programme name
Stop
Stop
14:30
14:30
14:30
Current
Current
Time
Time
Current Time
Stop Processing;
ExitExit
Record,shows
Record,shows
Processing;
Stop:
ExitRecord,shows
Record, showsProcessing;
processing.
Exit
/Exit
/Exit
ark, if shows /means
recording,and
Exit:
Switch
Record
menu mode.
/Exit
Switch
Switch
Record
Record
menu
menu
mode;
mode;
lor image,otherwise
it is
gray. menu
Play:Switch
Enter
playback
mode,mode;
play it from the star recorded programme. Check playback Record
Play
Play
instruction
inplay
details.
Play
Enter
Enter
Playback
Playback
mode,
mode,
play
it from
it from
the start
the start
recorded
recorded
programme
programme
Check
Check
Playback
Playback
instruction
instruction
in details;
in details;
Enter Playback mode, play it from the start recorded programme Check Playback instruction in detail
Time Shift
Timeshift
Timeshift
TimeTimeshift
Shift menu
Timeshift
Timeshift
menu
menu
Time shift is similar with Record menu, includes two kind: one is Full Mode and the other is
Timeshift
menu
Timeshift
Timeshift
is similar
is similar
with
with
Record
Record
menu,
menu,
includes
includes
twotwo
kind:
kind:
oneone
is Full
is Full
Mode
Mode
andand
the the
other
other
is is
Simple
Mode. They
can switch
by Exit key.
At Time
shift mode,
Timeone
shiftiskeeps
still. and the other is
Timeshift
iscan
similar
with
menu,
two
kind:
Fullkeeps
Mode
Simple
Simple
Mode.
Mode.
They
They
can
switch
switch
byRecord
Exit
by Exit
key.
key.
At Timeshift
Atincludes
Timeshift
mode,
mode,
Timeshift
Timeshift
keeps
still.still.
Simple Mode. They can switch by Exit key. At Timeshift mode, Timeshift keeps still.
Simple
Simple
Mode:
Mode:
FullFull
Mode:
Mode:
Full
Mode:
Simple
Mode:
Simple Mode:
Full Mode:
S
S
[00:00:00/00:50:00]
[00:00:00/00:50:00]
SHIFTSHIFT
TIME/MAX
TIME/MAX
SHIFTSHIFT
TIME TIME
S
PlayPlay
S
S
SHIFT TIME/MAX SHIFT TIME [00:00:00/00:50:00]
FB FB
Play
FF FF
FB
S
PrevPrev NextNext Pause
Pause StopStop
Stop
Prev
Next
Pause
FF
Note
Note
NOTE:
Note
At Simple
At Simple
Mode,it
Mode,it
shows
shows
current
current
Timeshift
Timeshift
playing
playing
conditon,
conditon,
such
such
as Play,Pause;
as Play,Pause;
At Simple
Mode,it
shows shows
currentcurrent
Time shift
playing condition,
such as Play
oras
Pause.
AtMode
Simple
Mode,it
Timeshift
playing conditon,
such
Play,Pause;
Simple
Simple
Mode
shows
shows
on the
on the
rightright
down
down
side;
side;
Simple
Mode
shows
on
the
right
down
side.
Simple Mode shows on the right down side;
Timeshift
Timeshift
conditon
conditon
TimeTimeshift
shift condition
conditon
Timeshift
Timeshift
Start
Start
conditon
conditon
Timeshift
Enter
Enter
Timeshift
Timeshift
to press
toStart
pressconditon
,and,and
the the
image
image
paused
paused
andand
it start
it start
record
record
fromfrom
the the
paused
paused
position.
position.
Time shift start condition
Enter Timeshift to press
,and the image paused and it start record from the paused position
,and the image paused and it start record from the paused
Enter Time shift to press
Stop
Stop
Stop
position.
StopStop
Timeshift.
Timeshift.
Stop:Stop
StopTimeshift.
Time shift.
ExitExit
Exit:
Switch
Time
shift
menu mode.
Exit
Swich
Swich
Timeshift
Timeshift
menu
menu
mode.
mode.
Swich
Timeshift
menu
mode.
Play:
Enter
Time
shift
Play
condition.
Play
Play
Play
Enter
Enter
Timeshift
Timeshift
PlayPlay
condition;
condition;
Enter Timeshift Play condition;
37
Menu Operation
Time shift Play
At Time shift Play condition, the system record DTV and play it at the same time.
Timeshift Play
Time shift Play is start by press ,at Time shift Play condition, it can work Pause,Fast Forward,
At Timeshift Play condition, the system record DTV a n d play it at the same time.
Fast Rewind and it would enter A->B circle playing condition.
Timeshift Play is start by press
,at Timeshift Play condition, it can work Pause,Fast Forwa
Fast Rewind,and it would enter A->B circle playing condition.
Time shift Record
Time shift
Record condition,
Timeshift
Record similar to Record mode.
Timeshift Record condition,similar to Record mode.
Playback
Playback
is similar with Time shift,one is Full Mode,and the other is Simple Mode, they can be
Playback
switchPlayback
by Exit key.
is similar with Timeshift,one is Full Mode,and the other is Simple Mode, they can be
At Playback
Playback
switchmode,
by Exit
key. shows still.
At Playback mode,Playback shows still.
Full Mode:
Full Mode:
00:00:00/00:50:00
Play
FB
FF
Prev
Next
Pause
Stop
18:13
NOTE:Note
At Simple mode, there is only power indictor blinking but no operation menu display.
At Simple mode, there is only power indicator blinking but no operation menu display.
38
Troubleshooting and Advise
Please check if you can solve the troubleshooting by yourself.
Troubleshooting
Control
No Signal
Please check that all cables are correctly plugged
in.
No Colour Shades
Adjust the contrast, the colour and the brightness.
Stain show on the screen
Double or multiple display image
Snow on the screen
Maybe result from a lighting signal from car,
motor, neon light and other electrical devices or
appliances.
Maybe the result of an electrical wave disturb from
other TV, Computer and Game machine or Radio.
The cables of the antenna are not correctly
plugged in.
The remote control does not work
Please check the batteries order and alignment,
check that the IR of the remote control is not hidden by something.
“Zip” made noise on TV cover
Even if the display image is correct, the noise may
come from an unsteady fixation of the panel.
No Sound
Make sure that you have not press the MUTE button of the panel or of the remote control.
39
Specifications
This manual is only for you reference, any change to the design and specification will not
be advised.
SUPPORT
DVD
Model
GVA22FLEDA
Display Type
TFT LED
Resolution (Pixel)
1920 x 1080
Aspect Ratio
16: 9
Power Supply
DC 12V IN
Power Consumption
36W
TV System
PAL
Video Input Format
PAL/NTSC
Audio Output Power
L/R 2 x 3W
ANTENNA
YES
AV-IN
YES
YPbPr-IN
YES
HDMI-IN
YES
VGA (PC)-IN
YES
VGA (PC) AUDIO-IN
YES
SCART
--
EARPHONE - OUT
YES
S-VIDEO - IN
--
COAXIAL - OUT
YES
COMMON INTERFACE
--
USB
YES
Disc Physical Format
--
DVD Video Output Format
--
40
Notes
41
Notes
Download PDF
Similar pages