Cisco Catalyst 9300 Series Switches Data Sheet

Data Sheet
Cisco Catalyst 9300 Series Switches
Built for Security, IoT, Mobility, and Cloud
The Cisco® Catalyst® 9300 Series Switches are Cisco’s lead stackable enterprise switching platform built for
security, IoT, mobility, and cloud. They are the next generation of the industry’s most widely deployed switching
platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access
(SD-Access), Cisco’s lead enterprise architecture. At 480 Gbps, they are the industry’s highest-density stacking
bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized
platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready
for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run thirdparty applications and scripts natively within the switch.
The Catalyst 9300 Series is designed for Cisco StackWise® virtual technology, providing flexible deployment
with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in
a stackable (sub-50-ms) solution. The highly resilient and efficient power architecture features Cisco StackPower®,
which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE®) and Power over Ethernet Plus
(PoE+) ports. The switches are based on the Cisco Unified Access™ Data Plane 2.0 (UADP) 2.0 architecture
which not only protects your investment but also allows a larger scale and higher throughput. A modern
operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of
Things (IoT) convergence.
The Foundation of Software-Defined Access
Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility
everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software
innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable
customer revenue growth by accelerating the rollout of business services.
The Cisco Digital Network Architecture (Cisco DNA™) with SD-Access is the network fabric that powers business. It
is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network
operations. The programmable architecture frees your IT staff from time-consuming, repetitive network
configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access
enables policy-based automation from edge to cloud with foundational capabilities. These include:
●
Simplified device deployment
●
Unified management of wired and wireless networks
●
Network virtualization and segmentation
●
Group-based policies
●
Context-based analytics
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 23
Product Overview: Features
Product Highlights
●
Highest wireless scale with Wave 2 access points supported on a single switch with select models
●
UADP 2.0 Application-Specific Integrated Circuit (ASIC) with programmable pipeline and microengine
capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, access
control lists (ACLs), and quality of service (QoS) entries
●
Intel® x86 CPU complex with 8-GB memory, and 16 GB of flash and external USB 3.0 SSD pluggable
storage slot to host containers
●
USB 2.0 slot to load system images and set configurations
●
Up to 480 Gbps of local stackable switching bandwidth
●
Flexible and dense uplink offerings with 1G, Multigigabit, 10G, and 40G, with platform readiness for 25G
●
Flexible downlink options with 1G and Multigigabit links
●
Leading PoE capabilities with up to 384 ports of PoE per stack, 60W Cisco UPOE, and PoE+
●
Intelligent Power Management with Cisco StackPower technology, providing power stacking among
members for power redundancy
●
Line-rate, hardware-based Flexible NetFlow (FNF), delivering flow collection of up to 64,000 flows
●
IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks
●
Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-toIPv6 migration
●
Open IOS XE, a modern operating system for the enterprise with support for model-driven programmability
including NETCONF, RESTCONF, YANG, on-box Python scripting, streaming telemetry, container-based
application hosting, and patching for critical bug fixes. The OS also has built-in defenses to protect against
runtime attacks
●
SD-Access: The Cisco Catalyst 9300 Series Switches form the foundational building block for SD-Access,
Cisco’s lead enterprise architecture:
◦ Policy-based automation from edge to cloud
◦ Simplified segmentation and micro-segmentation, with predictable performance and scalability
◦ Automation through the Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM)
◦ Policy handled through the Cisco Identity Services Engine (ISE)
◦ Network assurance provided through the Network Data Platform
◦ Faster launch of new business services and significantly improved issue resolution time
●
Plug and Play (PnP) enabled: A simple, secure, unified, and integrated offering to ease new branch or
campus device rollouts or updates to an existing network
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 23
●
Advanced security:
◦ Encrypted Traffic Analytics (ETA): You benefit from the power of machine learning to identify and take
actions toward threats or anomalies in your network, including malware detection in encrypted traffic
(without decryption) and distributed anomaly detection
◦ Support for AES-256 with the powerful MACsec 256-bit encryption algorithm available on all models
◦ Trustworthy systems: Hardware anchored Secure Boot and Secure Unique Device Identification (SUDI)
support for Plug and Play, to verify the identity of the hardware and software
Platform Details
Switch Models and Configurations
The Cisco Catalyst 9300 Series is made up of seven different switch models. Any of the models can be used
together in a stack of up to eight units.
Figure 1.
Cisco Catalyst 9300 Series Switches
Table 1 lists port scale and power details for the Cisco Catalyst 9300 Series models.
Table 1.
Cisco Catalyst 9300 Series Switch Configurations
Model
Total 10/100/1000 or Multigigabit copper ports
Default AC
power supply
Available
PoE power
Cisco
StackWise-480
Cisco
StackPower
C9300-24T
24
350W AC
Yes
Yes
C9300-48T
48
350W AC
C9300-24P
24 POE+
715W AC
445W
Yes
Yes
Yes
Yes
C9300-48P
48 POE+
715W AC
C9300-24U
24 Cisco UPOE
1100W AC
437W
Yes
Yes
830W
Yes
Yes
C9300-48U
48 Cisco UPOE
C9300-24UX
24 Multigigabit Cisco UPOE
(100 Mbps or 1, 2.5, 5, or 10 Gbps)
1100W AC
822W
Yes
Yes
1100W AC
490W
Yes
Yes
Network Modules
The Cisco Catalyst 9300 Series Switches support optional network modules for uplink ports. The default switch
configuration does not include the network module. When you purchase the switch, you can choose from the
network modules described in Table 2.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 23
Figure 2.
Cisco Catalyst 9300 Series Network Modules
Table 2.
Network Module Numbers and Descriptions
Network module
Description
C9300-NM-4G
9300 Series 4x 1G Network Module
C9300-NM-8X
9300 Series 8x 10G Network Module
C9300-NM-2Q
9300 Series 2x 40G Network Module
C9300-NM-4M
9300 Series 4x Multigigabit Network Module
Please note: Existing 3850 network modules are also supported in the Cisco Catalyst 9300 Series platforms.
For additional details, please read our FAQs:
https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-9300-series-switches/nb-09-cat-9k-faqcte-en.pdf
Power Supplies
The Cisco Catalyst 9300 Series Switches support dual redundant power supplies. The switches ship with one
power supply by default, and the second power supply can be purchased when the switch is ordered or at a later
time. If only one power supply is installed, it should always be in power supply bay #1. The switches also ship with
three field-replaceable fans.
Figure 3.
Cisco Catalyst 9300 Series Dual Redundant Power Supplies
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 23
Table 3 lists the different power supplies available in these switches and available PoE power.
Table 3.
Power Supply Models
Models
Default power supply
Available PoE power
24-port data switch
PWR-C1-350WAC
–
48-port data switch
PWR-C1-350WAC
24-port PoE+ switch
PWR-C1-715WAC
445W
48-port PoE+ switch
PWR-C1-715WAC
437W
24-port Cisco UPOE switch
PWR-C1-1100WAC
830W
48-port Cisco UPOE switch
PWR-C1-1100WAC
822W
24-port Multigigabit Cisco UPOE switch
PWR-C1-1100WAC
490W – Support in Open Cisco IOS XE 16.6
Performance and Scalability
Performance and scalability metrics for the Catalyst 9300 Series are provided in Table 4.
Table 4.
Performance Specifications
Description
Performance
Switching capacity
208 Gbps on 24-port Gigabit Ethernet model
256 Gbps on 48-port Gigabit Ethernet model
640 Gbps on 24-port Multigigabit Ethernet model
Stacking bandwidth
480 Gbps
Total number of MAC addresses
32,000
Total number of IPv4 routes (ARP plus learned routes)
32,000 (24,000 direct routes and 8000 indirect routes)
IPv4 routing entries
32,000
IPv6 routing entries
16,000
Multicast routing scale
8000
QoS scale entries
5120
ACL scale entries
5120
Packet buffer per SKU
16 MB buffer for 24- or 48-port Gigabit Ethernet models
32 MB buffer for 24-port Multigigabit
FNF entries
64,000 flow on 24- and 48-port Gigabit Ethernet models
128,000 flows on 24-port Multigigabit
DRAM
8 GB
Flash
16 GB
VLAN IDs
4000
Total Switched Virtual Interfaces (SVIs)
2000
Jumbo frames
9198 bytes
Total routed ports per 9300 Series stack
208
Wireless
Wireless bandwidth per switch
Up to 96 Gbps on 48-port Gigabit Ethernet model
Up to 48 Gbps on 24-port Gigabit Ethernet model
Forwarding rate of switch models (with 2x 40 Gigabit Ethernet uplinks for 24-port models and 48‑port models)
Model
Forwarding rate
C9300-24T
154.76 Mpps
C9300-24P
154.76 Mpps
C9300-24U
154.76 Mpps
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 23
Description
Performance
C9300-48T
190.48 Mpps
C9300-48P
190.48 Mpps
C9300-48U
190.48 Mpps
C9300-24UX
400 Mpps
Forwarding rate for both IPv4 and IPv6
SD-Access Architecture
What if you could give time back to IT? Provide network access in minutes for any user or device to any application
– without compromise? SD-Access is industry’s first policy-based automation from network edge to cloud. Your
foundation for your digital network, Cisco® Software-Defined Access (SD-Access). Built on the principles of the
Cisco Digital Network Architecture (Cisco DNA™), SD-Access provides end-to-end segmentation to keep user,
device and application traffic separate without a redesign of the network. It automates user access policy so
organizations can make sure the right policies are set for any user or device with any application across the
network. This is all done with a single network fabric, to enable a consistent user experience anywhere without
compromising on security, meaning common user policy for LAN, WAN and
There are many challenges today in managing the network to drive business outcomes. These limitations are due
to manual configuration and fragmented tool offerings. SD-Access provides:
●
A transformational management solution that reduces operational expenses and enhances business agility
●
Consistent management of wired and wireless network provisioning and policy
●
Automated network segmentation and group-based policy
●
Contextual insights for fast issue resolution and capacity planning
●
Open and programmable interfaces for integration with third-party solutions
For an overview of key use-cases SD-Access addresses, refer to SD-Access Solution Overview.
Platform Benefits
Cisco IOS XE opens a completely new paradigm in network configuration, operation, and monitoring through
network automation. Cisco’s automation solution is open, standards-based, and extensible across the entire
lifecycle of a network device. The various automation mechanisms are outlined below.
●
Automated device provisioning is the ability to automate the process of upgrading software images and
installing configuration files on Cisco Catalyst switches when they are being deployed in the network for the
first time. Cisco provides both turnkey solutions such as Plug and Play and off-the-shelf tools such as ZeroTouch Provisioning (ZTP) and Preboot Execution Environment (PXE) that enable an effortless and
automated deployment.
●
API-driven configuration is available with modern network switches such as the Cisco Catalyst 9300
Series. It supports a wide range of automation features and provides robust open APIs over NETCONF
using YANG data models for external tools, both off-the-shelf and custom built, to automatically provision
network resources.
●
Granular visibility enables model-driven telemetry to stream data from a switch to a destination. The data
to be streamed is identified through subscription to a data set in a YANG model. The subscribed data set is
streamed to the destination at specified intervals. Additionally, Open IOS-XE enables the push model. It
provides near-real-time monitoring of the network, leading to quick detection and rectification of failures.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 23
●
Seamless software upgrades and patching supports OS resilience. Open IOS-XE supports patching,
which provides fixes for critical bugs and security vulnerabilities between regular maintenance releases.
This support lets you add patches without having to wait for the next maintenance release.
Security
●
Encrypted Traffic Analytics (ETA) is a unique capability for identifying malware in encrypted traffic coming
from the access layer. Since more and more traffic is becoming encrypted, the visibility this feature affords
for threat detection is critical for keeping your network secure at different layers.
●
AES-256 MACsec encryption is the IEEE 802.1AE standard for authenticating and encrypting packets
between switches. The Catalyst 9300 Series switches support 256-bit and 128-bit Advanced Encryption
Standard (AES) on all ports at all speeds, providing the most secure link encryption.
●
Trustworthy systems built with Cisco Trust Anchor Technologies provide a highly secure foundation
for Cisco products. With The Catalyst 9300 Series, these technologies enable hardware and software
authenticity assurance for supply chain trust and strong mitigation against man-in-the-middle attacks that
compromise software and firmware. Trust Anchor capabilities include:
◦ Image signing: Cryptographically signed images provide assurance that the firmware, BIOS, and other
software are authentic and unmodified. As the system boots, the system’s software signatures are
checked for integrity.
◦ Secure Boot: Cisco Secure Boot technology anchors the boot sequence chain of trust to immutable
hardware, mitigating threats against a system’s foundational state and the software that is to be loaded,
regardless of a user’s privilege level. It provides layered protection against the persistence of illicitly
modified firmware.
◦ Cisco Trust Anchor module: A tamper-resistant, strong cryptographic, single-chip solution provides
hardware authenticity assurance to uniquely identify the product so that its origin can be confirmed to
Cisco. This provides assurance that the product is genuine.
Resiliency and High Availability
●
StackWise-480: The Catalyst 9300 Series supports the industry’s highest back-panel stacking bandwidth
solution (480 Gbps) with StackWise-480.
●
Cisco StackPower: Cisco StackPower is an innovative power interconnect system that allows the power
supplies in a stack to be shared as a common resource among all the switches. This allows you to simply
add one extra power supply in any switch of the stack and either provide power redundancy for any of the
stack members or simply add more power to the shared pool.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 23
Figure 4.
●
Cisco Catalyst 9300 Series StackPower
High availability: The Catalyst 9300 Series supports high-availability features, including the following:
◦ Cross-stack EtherChannel provides the ability to configure Cisco EtherChannel technology across
different members of the stack for high resiliency.
◦ IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) provides rapid spanning tree convergence
independent of spanning tree timers and also offers the benefit of Layer 2 load balancing and distributed
processing.
◦ Per-VLAN Rapid Spanning Tree (PVRST+) allows rapid spanning tree (IEEE 802.1w) reconvergence on
a per-VLAN spanning tree basis, providing simpler configuration than MSTP. In both MSTP and PVRST+
modes, stacked units behave as a single spanning tree node.
◦ Switch-port auto-recovery (“err-disable” recovery) automatically attempts to reactivate a link that is
disabled because of a network error.
◦ The Catalyst 9300 Series platform delivers the best NSF/SSO resiliency architecture in a stackable
solution with sub-50-ms failover.
Flexible NetFlow
●
Flexible NetFlow (FNF): Cisco IOS® Software FNF is the next generation in flow visibility technology. It
enables optimization of the network infrastructure, reduces operation costs, and improves capacity planning
and security incident detection with increased flexibility and scalability. The Catalyst 9300 Series is capable
of up to 64,000 flow entries on 48-port and 24 port models and up to 128,00 flow entries on 24-port mGig.
Application Visibility and Control
●
NBAR2: Next-Generation Network-Based Application Recognition (NBAR2) enables advanced application
classification techniques, accuracy with up to 1400 predefined and well-known application signatures and
up to 150 encrypted applications on the Cisco Catalyst 9000 Series. The most popular applications included
are Skype, Office 365, Microsoft Lync, Cisco WebEx®, and Facebook, among many others that are
predefined and easy to configure. NBAR2 provides the network administrator with an important tool to
identify, control, and monitor end-user application usage while helping ensure a quality user experience and
securing the network from malicious attacks. NBAR2 leverages FNF to report application performance and
activities within the network to any supported NetFlow collector, such as Cisco Prime®, Cisco
Stealthwatch®, or any compliant third-party tool.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 23
QoS
●
Superior QoS: The Cisco Catalyst 9300 Series offers Gigabit Ethernet speeds with intelligent services that
keep traffic flowing smoothly, even at 10 times the normal network speed. Industry-leading mechanisms for
cross-stack marking, classification, and scheduling deliver superior performance for data, voice, and video
traffic at wire speed. Superior QoS includes granular wireless bandwidth management and fair sharing,
802.1p Class of Service (CoS) and Differentiated Services Code Point (DSCP) field classification, Shaped
Round Robin (SRR) scheduling, Committed Information Rate (CIR), and eight egress queues per port.
Service Discovery
●
Multicast DNS (mDNS) gateway: This service discovery gateway capability facilitates sharing of services
advertised using the Apple mDNS (Bonjour) protocol, such as printers, Apple TVs, and file services across
the network. Additionally, the administrator can create policies defining which services can be seen and
accessed by the users in the network. This capability facilitates a Bring-Your-Own-Device (BYOD) rollout.
Smart Operation
●
Bluetooth ready: The Catalyst 9300 Series has hardware support to connect a Bluetooth dongle to your
switch, enabling you to use this wireless interface as an IP management port interface. The port can be
used for configuration and troubleshooting using WebUI or the Command-Line Interface (CLI), and to
transfer images and configurations.
●
WebUI: WebUI is an embedded GUI-based device-management tool that provides the ability to provision
the device, to simplify device deployment and manageability, and to enhance the user experience. It comes
with the default image, so there is no need to enable anything or install any license on the device. You can
use WebUI to build configurations, and to monitor and troubleshoot the device without having CLI expertise.
●
Efficient switch operation: Cisco Catalyst 9300 Series Switches provide optimum power saving with
Energy Efficient Ethernet (EEE) on the RJ-45 ports and low-power operations for industry best-in-class
power management and power consumption capabilities. The ports support reduced power modes so that
ports not in use can move into a lower power utilization state. Other efficient switch operation features are
as follows:
◦ Per-port power consumption command allows customers to specify a maximum power setting on an
individual port.
◦ Per-port PoE power sensing measures actual power being drawn, enabling more intelligent control of
powered devices. The PoE MIB provides proactive visibility into power usage and allows you to set
different power-level thresholds.
●
RFID tags: The Catalyst 9300 Series switches have an embedded RFID tag that facilitates easy asset and
inventory management using commercial RFID readers.
●
Blue beacon: The Catalyst 9300 Series switches support a blue beacon LED for easy identification of the
switch being accessed.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 23
High-Performance IP Routing
The Cisco Express Forwarding hardware routing architecture delivers extremely high-performance IP routing in
Cisco Catalyst 9300 Series Switches, based on:
●
IP unicast routing protocols (including static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng,
and Open Shortest Path First [OSPF], Routed Access) are supported for small network routing applications
with the Network Essentials stack. Equal-cost routing facilitates Layer 3 load balancing and redundancy
across the stack.
●
Advanced IP unicast routing protocols (including Full [OSPF], Enhanced Interior Gateway Routing Protocol
[EIGRP], Border Gateway Protocol Version 4 [BGPv4], and Intermediate System-to-Intermediate System
Version 4 [IS-ISv4]) are supported for load balancing and for constructing scalable LANs. IPv6 routing
(using OSPFv3 and EIGRPv6) is supported in hardware for maximum performance.
●
Protocol-Independent Multicast (PIM) for IP multicast routing is supported, including PIM sparse mode
(PIM SM), and Source-Specific Multicast (SSM).
●
IPv6 addressing is supported on interfaces with appropriate show commands for monitoring and
troubleshooting.
Multigigabit Ethernet technology: Cisco Multigigabit Ethernet technology allows you to achieve bandwidth
speeds from 1 Gbps to 10 Gbps over traditional Category 5e cabling or above. This technology addresses the
need for exponential increases in bandwidth with the enormous growth of 802.11ac and new wireless applications
without having to replace current cabling infrastructure.
Power Over Ethernet Leadership
Cisco Universal Power over Ethernet (Cisco UPOE): PoE removes the need for wall sockets to power each
PoE-enabled device and eliminates the cost of additional electrical cabling and circuits that would otherwise be
necessary in IP phone and WLAN deployments. Cisco UPOE extends the IEEE PoE+ standard to double the
power per port to 60 watts. This facilitates delivery of network power to a broad range of devices requiring higher
power, including virtual desktop terminals, IP turrets, compact switches, building management gateways, LED
lights, wireless access points, and IP phones. The Catalyst 9300 Series supports Cisco UPOE, PoE+ and PoE,
thereby addressing the largest range of network power needs.
Tables 5 and 6 show the power supply combinations required for different PoE needs.
Table 5.
Power Supply Requirements
24-port PoE switch
48-port PoE switch
PoE on all ports (15.4W per port)
1 PWR-C1-715WAC
1 PWR-C1-1100WAC or 2 PWR-C1-715WAC
PoE+ on all ports (30W per port)
1 PWR-C1-1100WAC or
2 PWR-C1-715WAC
2 PWR-C1-1100WAC or 1 PWR-C1-1100WAC and
1 PWR-C1-715WAC
Power Supply Requirements for Cisco UPOE
Cisco UPOE (60W per port) on all
ports (24-port switch) or up to
30 ports (48-port switch)
24-port Cisco UPOE switch
48-port Cisco UPOE switch
24-port Multigigabit Cisco
UPOE switch
1 PWR-C1-1100WAC and 1 PWRC1-715WAC
2 PWR-C1-1100WAC
2 PWR-C1-1100WAC
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 10 of 23
●
Perpetual PoE: With Perpetual PoE, the PoE power is maintained during a switch reload. This is important
for IoT endpoints such as PoE-powered lights, so that there is no disruption during switch reboot.
●
Fast PoE: When power is restored to a switch, PoE starts delivering power to endpoints without waiting for
the operating system to fully load, thereby speeding up the time for the endpoint to start up.
Software Requirements
Cisco Catalyst 9300 Series Switches run on Open IOS XE 16.5.1a release or later. This software release includes
all the features listed earlier in the Platform Benefits section.
Packaging
The Cisco Catalyst 9000 family of switches introduces a new and simplified licensing package in the form of base
and add-on licenses.
●
The base licensing package includes the Network Essentials and Network Advantage licensing options
that are tied to the hardware. Between them, the base licensing packages cover switching fundamentals,
management automation, troubleshooting, and advanced switching features.
●
The add-on licensing package includes the Cisco DNA Essentials and Cisco DNA Advantage options. In
addition to on-box capabilities, the features available with this package provide Cisco innovations on the
switch, as well as on Cisco DNA Center, in the APIC-EM.
License consumption is easily determined by the package itself. While base licenses are always permanent and
without an expiration date, add-on licenses may be purchased for a 3-, 5-, or 7-year term (and hence are also
known as term-based licenses). Table 7 shows the combinations of base and add-on licenses may be purchased.
Licensing Combinations
Network Essentials
Network Advantage
*
Cisco DNA Essentials
Cisco DNA Advantage
Yes
No
Yes
*
Yes
For this combination, the Cisco DNA Essentials license must be ordered separately using Cisco Smart Software Manager.
Ordering and managing licenses with Smart Accounts: Creating Smart Accounts by using the Cisco Smart
Software Manager (SSM) enables you to order devices and licensing packages and also manage your software
licenses from a centralized website. You can set up Cisco SSM to receive daily email alerts and to be notified of
expiring add-on licenses that you want to renew.
You must order an add-on license in order to purchase a switch. When the license term expires, you can either
renew the add-on license to continue using it or deactivate the add-on license and then reload the switch to
continue operating with the base license capabilities.
Both the base and add-on licenses are also available for a 90-day evaluation period. An evaluation license is
activated temporarily, without purchase. An expired evaluation license cannot be reactivated after reload.
Note:
It is not required to deploy Cisco DNA Center just to use one of the above packages.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 11 of 23
Table 6 shows the features included in the Essentials and Advantage packages.
Table 6.
Essentials and Advantage Package Features
Features
Network
Essentials
Network
Advantage
Cisco DNA
Essentials
Cisco DNA
Advantage
Switch fundamentals
✓
Spanning Tree Protocol (STP), Rapid STP (RSTP), VLAN
Trunking Protocol (VTP), trunking, Private VLAN
(PVLAN), dynamic voice VLAN, IPv6, PnP, Cisco
Discovery Protocol, 802.1Q tunneling (Q-in-Q), Routed
Access – OSPF and RIP, Policy-Based Routing (PBR),
Virtual Router Redundancy Protocol (VRRP), Internet
Group Management Protocol (IGMP), PIM Stub,
Weighted Random Early Detection (WRED), First Hop
Security (FHS), 802.1X, MACsec-128, Control Plane
Policing (CoPP), Cisco TrustSec® SGT Exchange
Protocol (SXP), IP SLA Responder, SSO, EIGRP Stub,
Microflow Policing, Class-Based Weighted Fair Queuing
(CBWFQ), hierarchical QoS (H-QoS), Application
Reporting, Syslog, SNMP
✓
✗
✗
Advanced switch capabilities and scale
BGP, EIGRP, Hot Standby Router Protocol (HSRP), ISIS, Bootstrap Router (BSR), Multicast Source Discovery
Protocol (MSDP), Bidirectional PIM (PIM-BIDIR), Label
Switched Multicast (LSM), IP SLA, Full OSPF
✗
✓
✗
✗
Network segmentation
VPN Routing and Forwarding (VRF), Virtual Extensible
LAN (VXLAN), Cisco Locator/ID Separation Protocol
(LISP), Cisco TrustSec, SD-Wireless, Multiprotocol Label
Switching (MPLS), Layer 3 VPN (L3VPN), Multicast VPN
(mVPN)
✗
✓
✗
✗
Optimized network deployments
mDNS gateway
✗
✗
✗
✓
Automation
Netconf/YANG, PnP Agent, ZTP/Open PnP
✓
✓
✗
✗
Advanced automation
Containers, Python, Cisco IOS Embedded Event
Manager (EEM), Autonomic Networking Infrastructure
✗
✗
✓
✓
Telemetry and visibility
Streaming telemetry, sampled NetFlow, Switched Port
Analyzer (SPAN), Remote SPAN (RSPAN)
✓
✓
✗
✗
Advanced telemetry and visibility
Flexible NetFlow, Wireshark
✗
✗
✓
✓
Optimized telemetry a visibility
Encapsulated Remote SPAN (ERSPAN), Application
Visibility and Control (AVC), NBAR2
✗
✗
✗
✓
High availability and resiliency
NSF, Graceful Insertion and Removal (GIR), StackWise
Virtual, In-Service Software Upgrade (ISSU)
✗
✓
✗
✗
High availability and resiliency
Patching
✗
✗
✗
✓
Security
MACsec-256
✗
✓
✗
✗
Advanced security
Encrypted Traffic Analytics (ETA)
✗
✗
✗
✓
IOT integration
Audio Video Bridging (AVB), Precision Time Protocol
(PTP), Constrained Application Protocol (CoAP)
✗
✓
✗
✗
✗
✗
✓
✓
Switch features
Cisco DNA Center Features
Day 0 network bring-up automation
Cisco Network Plug-n-Play application, network settings,
device credentials
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 12 of 23
Features
Network
Essentials
Network
Advantage
Cisco DNA
Essentials
Cisco DNA
Advantage
Element management
Discovery, inventory, topology, software image, licensing,
and configuration management
✗
✗
✓
✓
Element management
Patching
✗
✗
✗
✓
Network monitoring
Product Security Incident Response Team (PSIRT)
compliance, end-of-life/end-of-sale reporting, telemetry
quotient, client 360, device 360, top talkers/
NetFlow/streaming telemetry collection and correlation
✗
✗
✓
✓
Static QoS configuration and monitoring
EasyQoS application
✗
✗
✓
✓
Policy-based automation
SD-Access, group-based policy for access, app
prioritization, monitoring, and path selection;
SD-Access with Integrated Wireless
✗
✗
✗
✓
Network assurance and analytics
Insights driven from analytics and machine learning for
the network, clients and applications that cover
onboarding, connectivity, and performance
✗
✗
✗
✓
Dimensions, Weight, Acoustic, Mean Time Between Failures
Table 7 shows the dimensions and mean time between failures of all models of 9300 Series switches.
Table 7.
Model Dimensions, Weight, and Mean Time Between Failures Metrics
Dimensions (H x W x D)
Model
Inches
Centimeters
C9300-24T
1.73 x 17.5 x 17.5
4.4 x 44.5 x 44.5
C9300-24P
1.73 x 17.5 x 17.5
4.4 x 44.5 x 44.5
C9300-24U
1.73 x 17.5 x 17.5
4.4 x 44.5 x 44.5
C9300-24UX
1.73 x 17.5 x 18.5
4.4 x 44.5 x 47.0`
C9300-48T
1.73 x 17.5 x 17.5
4.4 x 44.5 x 44.5
C9300-48P
1.73 x 17.5 x 17.5
4.4 x 44.5 x 44.5
C9300-48U
1.73 x 17.5 x 17.5
4.4 x 44.5 x 44.5
Model
Pounds
Kilograms
C9300-24T
16.03
7.27
C9300-24P
16.33
7.4
C9300-24U
16.63
7.54
C9300-24UX
18.18
8.25
C9300-48T
16.43
7.45
C9300-48P
16.73
7.59
C9300-48U
17.03
7.72
Weight
Mean time between failures (hours)
C9300-24T
314,790
C9300-24P
299,000
C9300-24U
238,410
C9300-24UX
214,760
C9300-48T
305,870
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 13 of 23
Dimensions (H x W x D)
C9300-48P
277,770
C9300-48U
227,410
Connectors
Table 8 shows the supported connectors for the Cisco Catalyst 9300 Series.
Table 8.
Connectors
Connectors and cabling
● 1000BASE-T ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling
● Multigigabit-T ports: RJ-45 connectors, 4-pair Cat 5E, Cat 6, Cat 6A UTP cabling
● 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling
● 100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10, dense wavelength-division multiplexing (DWDM) and
Coarse Wavelength-Division Multiplexing (CWDM) SFP transceivers: LC fiber connectors (single-mode or
multimode fiber)
● 10GBASE-SR, LR, LRM, ER, ZR, DWDM SFP+ transceivers: LC fiber connectors (single-mode or
multimode fiber)
● QSFP
● SFP+ connector
● Cisco StackWise-480 stacking ports: copper-based Cisco StackWise cabling
● Cisco StackPower: Cisco proprietary power stacking cables
● Ethernet management port: RJ-45 connectors, 4-pair Cat 5 UTP cabling
● Management console port: RJ-45-to-DB9 cable for PC connections
Power connectors
● Customers can provide power to a switch by using either the internal power or Cisco StackPower from
another member in the power stack. The connectors are located at the back of the switch.
● Internal power supply connector: The internal power supply is an auto-ranging unit. It supports input
voltages between 100 and 240 VAC. Use the supplied AC power cord to connect the AC power connector
to an AC power outlet.
For the latest Cisco transceiver module compatibility information, refer to
https://www.cisco.com/c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tableslist.html.
Management and Standards Support
Table 9 shows management and standards support for the Cisco Catalyst 9300 Series.
Table 9.
Management and Standards Support
*
Description
Specification
Management
BRIDGE-MIB
CISCO-SNMP-TARGET-EXT-MIB
CISCO-AUTH-FRAMEWORK-MIB
CISCO-STACKMAKER-MIB
CISCO-BGP4-MIB, BGP4-MIB
CISCO-MEMORY-POOL-MIB
CISCO-BRIDGE-EXT-MIB
CISCO-STP-EXTENSIONS-MIB
CISCO-BULK-FILE-MIB
CISCO-SYSLOG-MIB
CISCO-CABLE-DIAG-MIB
CISCO-TCP-MIB
CISCO-CALLHOME-MIB
CISCO-UDLDP-MIB
CISCO-CEF-MIB
CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
CISCO-CIRCUIT-INTERFACE-MIB
CISCO-VLAN-MEMBERSHIP-MIB
CISCO-ENTITY-VENDORTYPE-OID-MIB
CISCO-VTP-MIB
CISCO-CONTEXT-MAPPING-MIB
EtherLike-MIB
CISCO-DEVICE-LOCATION-MIB
HC-RMON-MIB
CISCO-DHCP-SNOOPING-MIB
IEEE8021-PAE-MIB
CISCO-EIGRP-MIB
IEEE8023-LAG-MIB
CISCO-EMBEDDED-EVENT-MGR-MIB
IF-MIB
CISCO-ENTITY-FRU-CONTROL-MIB
IGMP-MIB
CISCO-ENTITY-SENSOR-MIB
IGMP-STD-MIB
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 14 of 23
Description
Specification
ENTITY-MIB
IP-FORWARD-MIB
CISCO-ERR-DISABLE-MIB
IP-MIB
CISCO-CONFIG-COPY-MIB
IPMROUTE-STD-MIB
CISCO-FLOW-MONITOR-MIB
LLDP-EXT-MED-MIB
CISCO-FTP-CLIENT-MIB
LLDP-MIB
CISCO-HSRP-EXT-MIB
NOTIFICATION-LOG-MIB
CISCO-HSRP-MIB
OLD-CISCO-MEMORY-MIB
CISCO-IETF-ISIS-MIB
CISCO-CDP-MIB
CISCO-IF-EXTENSION-MIB
POWER-ETHERNET-MIB
CISCO-IGMP-FILTER-MIB
RMON2-MIB
CISCO-CONFIG-MAN-MIB
RMON-MIB
CISCO-IP-CBR-METRICS-MIB
SNMP-COMMUNITY-MIB
CISCO-IPMROUTE-MIB
SNMP-FRAMEWORK-MIB
CISCO-IP-STAT-MIB
SNMP-MPD-MIB
CISCO-IP-URPF-MIB
SNMP-NOTIFICATION-MIB
CISCO-L2L3-INTERFACE-CONFIG-MIB
SNMP-PROXY-MIB
CISCO-LAG-MIB
SNMP-TARGET-MIB
CISCO-LICENSE-MGMT-MIB
SNMP-USM-MIB
CISCO-MAC-AUTH-BYPASS-MIB
SNMPv2-MIB
CISCO-MAC-NOTIFICATION-MIB
SNMP-VIEW-BASED-ACM-MIB
CISCO-MDI-METRICS-MIB
TCP-MIB
CISCO-FLASH-MIB
UDP-MIB
CISCO-OSPF-MIB
CISCO-IMAGE-MIB
CISCO-OSPF-TRAP-MIB
CISCO-STACKWISE-MIB
CISCO-PAE-MIB
CISCO-PAGP-MIB
CISCO-PIM-MIB
CISCO-PING-MIB
CISCO-PORT-QOS-MIB
CISCO-PORT-SECURITY-MIB
CISCO-PORT-STORM-CONTROL-MIB
CISCO-POWER-ETHERNET-EXT-MIB
CISCO-PRIVATE-VLAN-MIB
CISCO-PROCESS-MIB
CISCO-PRODUCTS-MIB
CISCO-RF-MIB
CISCO-RTP-METRICS-MIB
CISCO-RTTMON-MIB
CISCO-SMART-INSTALL-MIB
Standards
EEE 802.1s
RMON I and II standards
IEEE 802.1w
SNMPv1, v2c, and v3
IEEE 802.1x
IEEE 802.1x-Rev
IEEE 802.3ad
IEEE 802.3af
IEEE 802.3at
IEEE 802.3x full duplex on 10BASE-T,
100BASE-TX, and 1000BASE-T ports
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p CoS prioritization
IEEE 802.1Q VLAN
IEEE 802.3 10BASE-T specification
IEEE 802.3u 100BASE-TX specification
IEEE 802.3ab 1000BASE-T specification
IEEE 802.3z 1000BASE-X specification
IEEE 802.3bz 10G BASE-T specification
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 15 of 23
Power Supply Specifications
Table 10 lists the power specifications for the Cisco Catalyst 9300 Series based on the kind of power supply used.
Table 10.
Power Specifications
Description
Specification
PWR-C1-1100WAC
PWR-C1-715WAC
PWR-C1-350WAC
Power supply rated maximum
1100W
715W
350W
Total output BTU (note: 1000
BTU/hr = 293W)
3793 BTU/hr, 1100W
2465 BTU/hr, 715W
1207BTU/hr, 350W
Input-voltage range and
frequency
115V to 240 VAC,
100 to 240 VAC,
100 to 240 VAC,
50 to 60 Hz
50 to 60 Hz
50 to 60 Hz
Input current
12-6A
10-5A
4-2A
Output ratings
-56V at 19.64A
-56V at 12.8A
-56V at 6.25A
Output holdup time
10 ms minimum at 102.5VAC
16.7 ms minimum at 100VAC
16.7 ms minimum at 100VAC
Power-supply input
receptacles
IEC 320-C16
IEC 320-C16
IEC 320-C16 (IEC60320-C16)
(IEC60320-C16)
(IEC60320-C16)
Power cord rating
13A
13A
10A
Physical specifications
(H x W x D): 1.58 x 3.25 s 13.7 in
(H x W x D): 1.58 x 3.25 x 12.20 in
(H x W x D): 1.58 x 3.25 x 12.20 in
Weight: 3 lb (1.4 kg)
Weight: 2.8 lb (1.3 kg)
Weight: 2.6 lb (1.2 kg)
Operating temperature
23° to 113°F (-5° to 45°C)
Storage temperature
-40° to 158°F (-40° to 70°C)
Relative humidity operating
and non-operating
noncondensing
5% to 90% noncondensing
Altitude
10,000 ft. (3000 meters), up to 45°C
Mean Time Between Failures
(MTBF)
Calculated MTBF must be greater than 300,000 using Telcordia SR-332, Method 1, Case 3. Demonstrated
MTBF is 500,000 hr (with 90% confidence level).
EMI and EMC compliance
FCC Part 15 (CFR 47) Class A
ICES-003 Class A
EN 55022 Class A
CISPR 22 Class A
AS/NZS 3548 Class A
BSMI Class A (AC input models only)
VCCI Class A
EN 55024, EN300386, EN 50082-1, EN 61000-3-2, EN 61000-3-3
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN 61000-6-1
Safety compliance
UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, CCC, CE Marking
LED indicators
“AC OK”: Input power to the power supply is OK
“PS OK”: Output power from the power supply is OK
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 16 of 23
Power Consumption of Standalone 9300 Series Switches
Table 11 shows the power consumption of standalone Cisco Catalyst 9300 Series Switches based on Alliance for
Telecommunications Industry Solutions (ATIS) testing using Internet Mix (IMIX) distribution stream traffic, with input
voltage of 115VAC at 60 Hz and no PoE loading. The values given are the maximum possible power consumption
numbers under the respective test scenarios.
Table 11.
Power Consumption of Standalone 9300 Series Switches
Measured P(W)
Half Port Traffic
Full Port Traffic
Weighted
No Link
PoE Test (No Traffic)
Average
Pw
SKU
FEP
Uplink
Input
0.01%
10%
30%
50%
100%
/ EEE
C9300-
350W
24T
Not
0.01%
10%
30%
50%
100%
25%
50%
90%
100%
/ EEE
115Vac
77.7
86.1
89.1
89.5
89.7
77.5
91.0
91.7
91.9
92.5
89.8
78.1
230Vac
77.4
85.4
88.5
88.7
88.8
77.0
89.8
90.7
90.9
91.3
88.7
77.7
115Vac
82.5
88.4
92.1
93.3
94.1
85.9
96.0
98.9
99.7
100.0
95.4
81.2
230Vac
81.8
87.6
90.4
92.0
92.9
84.9
94.2
96.9
97.9
98.3
93.7
80.5
115Vac
86.4
96.3
98.0
98.2
98.7
90.2
103.7
104.5
104.9
105.9
102.6
87.0
230Vac
85.4
95.1
96.6
96.8
97.3
89.1
102.1
102.9
103.3
104.2
101.0
86.0
115Vac
84.0
94.7
95.7
95.9
96.1
87.1
101.1
101.7
102.1
103.0
99.9
83.9
230Vac
83.2
93.6
94.4
94.6
95.1
86.2
99.2
100.1
100.5
101.4
98.1
83.2
115Vac
86.3
95.6
97.5
97.8
98.2
90.7
103.9
104.7
105.1
106.1
102.8
85.0
230Vac
85.4
94.5
96.2
96.4
97.0
89.7
102.2
103.2
103.6
104.5
101.2
84.3
115Vac
82.6
91.0
93.4
93.7
93.9
82.0
94.8
95.9
96.1
96.6
93.7
82.9
202.3
325.8
527.5
579.0
230Vac
81.6
89.8
92.2
92.4
92.6
81.7
93.7
94.6
94.7
95.2
92.6
82.3
199.0
318.2
510.6
559.9
115Vac
87.5
93.0
96.5
97.7
98.5
89.8
99.5
102.4
103.0
103.4
98.9
85.4
211.4
334.5
537.8
585.7
230Vac
86.1
91.3
94.4
95.8
96.6
88.9
98.5
101.5
101.9
102.4
97.9
84.6
207.9
328.0
520.3
568.2
115Vac
90.4
100.4
101.6
101.9
102.3
94.1
106.8
107.8
108.2
109.1
105.7
90.8
214.9
337.9
539.4
590.8
230Vac
89.4
99.1
100.3
100.5
100.7
92.8
106.1
106.5
106.9
107.8
104.9
89.6
211.0
329.7
522.2
571.0
115Vac
88.1
98.6
99.5
99.6
99.9
91.1
104.4
105.2
105.6
106.5
103.3
88.4
212.2
335.2
536.2
586.5
230Vac
87.1
97.2
98.1
98.3
98.8
90.0
103.3
103.9
104.3
105.2
102.1
87.5
208.0
326.8
519.3
567.6
115Vac
90.0
99.4
101.0
101.2
101.6
94.2
107.1
107.9
108.3
109.2
106.0
88.7
215.3
339.6
541.4
591.3
230Vac
89.0
97.9
99.8
100.0
100.5
93.1
105.8
106.7
107.1
108.1
104.8
87.8
211.7
331.9
524.2
572.3
115Vac
87.4
95.9
99.0
99.2
99.4
87.0
100.8
101.5
101.8
102.3
99.6
87.8
313.7
547.9
940.3
1041.4
230Vac
85.9
94.7
97.3
97.6
97.8
85.5
98.0
99.6
99.8
100.3
96.9
86.4
306.2
529.1
895.6
988.7
115Vac
92.2
97.8
101.2
102.7
103.6
95.4
105.2
108.3
109.0
109.4
104.6
94.4
321.0
554.0
943.5
1045.5
230Vac
90.6
96.1
99.4
100.9
101.7
93.7
103.4
106.4
107.2
107.6
102.8
93.2
313.5
536.6
901.5
994.6
115Vac
96.0
106.2
107.6
107.8
108.4
99.7
113.4
114.2
114.6
115.6
112.3
96.1
325.7
559.0
950.6
1053.0
230Vac
94.3
104.5
105.8
106.1
106.6
97.9
112.1
112.8
113.2
114.0
110.8
94.4
318.3
541.9
906.2
997.8
115Vac
93.4
103.9
104.8
105.0
105.5
96.5
110.4
111.3
111.5
112.4
109.2
93.4
323.2
555.8
946.7
1048.6
230Vac
91.8
102.0
103.0
103.3
103.7
94.8
108.7
109.4
109.8
110.6
107.5
91.8
314.9
538.4
902.2
994.5
115Vac
95.8
105.4
107.3
107.6
108.1
100.2
114.0
114.8
115.2
116.2
112.8
94.4
324.4
557.7
946.6
1049.0
230Vac
94.0
103.0
105.1
105.4
106.0
98.4
112.0
113.1
113.5
114.5
110.9
93.2
317.8
541.8
907.7
999.1
115Vac
81.5
94.9
95.7
95.9
96.4
80.8
98.6
100.2
101.3
102.3
97.2
82.2
230Vac
80.5
93.7
94.6
94.8
95.3
80.1
97.3
99.5
99.9
100.8
96.0
81.5
Installed
NM-41G
NM-410G
NM-240G
NM-810G
C9300-
715W
24P
Not
Installed
NM-41G
NM-410G
NM-240G
NM-810G
C9300-
1100W
24U
Not
Installed
NM-41G
NM-410G
NM-240G
NM-810G
C930048T
350W
Not
Installed
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 17 of 23
Measured P(W)
Half Port Traffic
Full Port Traffic
Weighted
No Link
PoE Test (No Traffic)
Average
Pw
SKU
FEP
Uplink
Input
0.01%
10%
30%
50%
100%
/ EEE
NM-4-
0.01%
10%
30%
50%
100%
25%
50%
90%
100%
/ EEE
115Vac
86.4
94.9
97.8
99.4
100.4
89.3
104.6
107.6
108.6
108.9
103.5
85.7
230Vac
85.3
93.8
96.6
98.4
99.1
88.2
103.4
106.2
106.9
107.2
102.3
84.8
115Vac
89.6
103.4
104.2
104.6
105.4
93.0
112.7
113.5
114.1
115.7
111.0
90.6
230Vac
89.0
102.0
102.8
103.1
103.9
91.9
111.0
111.8
112.4
114.0
109.4
89.3
115Vac
88.3
102.4
102.9
103.3
104.2
91.0
110.5
111.3
112.1
113.9
108.9
88.6
230Vac
87.3
100.9
101.4
101.8
102.7
89.9
108.8
109.6
110.3
112.1
107.2
87.6
115Vac
92.1
105.2
106.1
106.5
107.4
98.6
117.6
118.4
119.1
120.9
116.0
91.0
230Vac
91.1
103.9
104.7
105.1
106.0
97.3
115.8
116.6
117.3
119.0
114.3
90.0
115Vac
90.5
103.2
104.5
104.7
105.2
89.9
104.9
107.8
109.2
110.2
103.9
91.3
206.1
324.1
514.4
563.2
230Vac
89.4
102.2
103.4
103.6
104.1
88.9
103.7
106.9
108.4
109.3
102.7
89.9
202.9
316.9
500.6
547.5
115Vac
95.3
103.5
106.2
108.1
108.8
98.0
112.1
114.9
115.9
116.2
111.1
94.3
215.0
332.6
523.4
572.1
230Vac
94.0
102.2
105.2
106.9
107.8
96.4
111.3
114.1
115.2
115.5
110.2
93.1
211.2
324.8
509.3
555.8
115Vac
98.7
111.5
112.3
112.7
113.5
101.5
119.7
120.5
121.2
122.8
118.2
99.2
219.1
336.5
528.8
576.6
230Vac
97.1
110.7
111.5
111.9
112.7
100.6
119.2
120.0
120.7
122.3
117.6
97.9
215.5
329.5
514.2
560.5
115Vac
96.9
110.1
110.7
111.0
111.9
99.3
118.2
119.0
119.7
121.5
116.7
97.6
217.4
335.4
527.4
577.8
230Vac
95.6
109.2
109.7
110.1
111.0
98.1
117.5
118.2
119.0
120.6
115.8
96.0
213.0
326.9
511.9
558.8
115Vac
100.5
113.4
114.2
114.6
115.5
106.4
124.5
125.4
126.1
128.0
123.0
99.5
215.1
334.7
520.8
568.8
230Vac
99.4
112.8
113.5
113.9
114.9
105.3
124.0
124.9
125.6
127.4
122.5
98.4
212.3
327.4
507.4
553.1
115Vac
96.0
110.2
110.9
111.2
111.7
95.6
112.5
114.3
115.9
116.9
111.3
97.0
315.1
544.0
925.9
1023.0
230Vac
94.8
108.5
109.2
109.4
109.9
94.2
110.0
112.5
114.1
115.0
108.9
95.6
308.6
529.4
889.9
978.8
115Vac
97.4
105.8
109.0
110.7
111.0
99.9
115.1
117.8
118.9
119.2
114.0
96.4
319.2
547.3
928.0
1026.3
230Vac
95.4
103.9
107.4
108.7
110.0
98.8
113.4
116.2
117.0
117.4
112.4
94.9
314.3
535.6
896.0
984.3
115Vac
104.4
118.5
119.0
119.5
120.1
107.4
126.8
127.6
128.3
130.0
125.2
104.9
326.2
556.0
938.6
1035.6
230Vac
102.8
116.0
117.1
117.5
118.2
106.4
124.8
125.5
126.2
127.7
123.2
103.6
320.4
541.4
903.0
991.6
115Vac
102.9
117.2
117.6
118.0
119.0
104.8
123.8
124.6
125.3
127.0
122.2
102.5
324.1
552.4
934.4
1032.6
230Vac
101.2
114.9
115.5
115.9
117.0
103.9
123.0
123.7
124.4
126.1
121.4
101.7
316.9
537.9
898.2
988.3
115Vac
106.7
120.4
121.1
121.5
122.3
112.7
131.5
132.4
133.0
134.8
130.0
105.7
330.0
563.7
941.8
1043.4
230Vac
105.0
118.5
119.2
119.6
120.2
110.9
129.4
130.2
131.0
132.6
127.9
104.1
324.5
549.0
908.0
998.9
115Vac
188.0
195.7
196.8
197.4
198.9
208.8
224.6
227.0
228.6
232.0
223.8
168.6
364.2
521.6
784.3
851.4
230Vac
184.4
192.2
192.9
193.5
195.1
204.6
220.0
222.0
223.5
226.9
219.2
165.3
354.2
505.0
749.7
810.6
1G
NM-410G
NM-240G
NM-810G
C9300-
715W
48P
Not
Installed
NM-41G
NM-410G
NM-240G
NM-810G
C9300-
1100W
48U
Not
Installed
NM-41G
NM-410G
NM-240G
NM-810G
C930024XU
1100W
NM-810G
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 18 of 23
Safety and Compliance
Table 12 lists the safety and compliance information for the Cisco Catalyst 9300 Series.
Table 12.
Safety and Compliance Information
Description
Specification
● UL 60950-1
● CAN/CSA-C222.2 No. 60950-1
Safety certifications
● EN 60950-1
● IEC 60950-1
● AS/NZS 60950.1
● IEEE 802.3
Electromagnetic emissions certifications
● 47 CFR Part 15
● CISPR22 Class A
● EN 300 386 V1.6.1
● EN 55022 Class A
● EN 55032 Class A
● CISPR 32 Class A
● EN61000-3-2
● EN61000-3-3
● ICES-003 Class A
● TCVN 7189 Class A
● V-3 Class A
● CISPR24
● EN 300 386
● EN55024
● TCVN 7317
Environmental
Reduction of Hazardous Substances (ROHS) 5
Cisco Enhanced Limited Lifetime Hardware Warranty
The Cisco Catalyst 9300 Series Switches come with a Cisco Enhanced Limited Lifetime Warranty (E-LLW) that
includes Next-Business-Day (NBD) delivery of replacement hardware where available and 90 days of 8x5 Cisco
Technical Assistance Center (TAC) support.
Your formal warranty statement, including the warranty applicable to Cisco software, appears in the information
packet that accompanies your Cisco product. We encourage you to review the warranty statement shipped with
your specific product carefully before use.
Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.
For further information about warranty terms, visit https://www.cisco.com/go/warranty. Table 13 provides
information about the E-LLW.
Table 13.
E-LLW Details
Cisco E-LLW
Devices covered
Applies to Cisco Catalyst 9300 Series Switches.
Warranty duration
As long as the original customer owns the product.
End-of-life policy
In the event of discontinuance of product manufacture, Cisco warranty support is limited to 5 years from the
announcement of discontinuance.
Hardware replacement
Cisco or its service center will use commercially reasonable efforts to ship a replacement for NBD delivery,
where available. Otherwise, a replacement will be shipped within 10 working days after receipt of the Return
Materials Authorization (RMA) request. Actual delivery times might vary depending on customer location.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 19 of 23
Cisco E-LLW
Effective date
Hardware warranty commences from the date of shipment to customer (and in case of resale by a Cisco reseller,
not more than 90 days after original shipment by Cisco).
TAC support
Cisco will provide during business hours, 8 hours per day, 5 days per week, basic configuration, diagnosis, and
troubleshooting of device-level problems for up to a 90-day period from the date of shipment of the originally
purchased Cisco Catalyst 9300 Series product. This support does not include solution or network-level support
beyond the specific device under consideration.
Cisco.com access
Warranty allows guest access only to Cisco.com.
Cisco Services For Next-Generation Cisco Catalyst Fixed Switches
Achieve infrastructure excellence faster and with less risk. Cisco Catalyst 9K Services provide expert guidance
to help you successfully deploy, manage and support the new Catalyst 9K Series Switches. With unmatched
networking expertise, best practices and innovative tools, we can help you reduce overall upgrade, refresh,
and migration costs as you introduce new hardware, software and protocols into the network. Offering a
comprehensive lifecycle of services – from implementation, optimization, technical and managed services –
Cisco experts help you minimize disruption and achieve operational excellence to extract maximum value
from your DNA-ready infrastructure.
Learn more about Cisco Services for Enterprise Networks
Software Policy for Cisco Catalyst 9300 Series Switches
Software Policy For Network Stack Components
Customers with the Network Essential Stack and Network Advantage Stack software feature sets are provided with
maintenance updates and bug fixes designed to maintain compliance of the software. This includes compliance
with published specifications, release notes, and industry standards as long as the original end user continues to
own or use the product or up to one year from the end-of-sale date for the product, whichever occurs earlier.
Cisco Embedded Support for Cisco DNA Term Components
Cisco Embedded Support delivers the right support for Cisco software products and suites. It will keep your
business applications performing as expected and protect your investment. Cisco Embedded Support for the DNA
Essentials and DNA Advantage term components is included. Cisco Embedded Support provides access to TAC
support, major software updates, maintenance and minor software releases, and the Cisco Embedded Support
site, for increased productivity with anytime access.
Ordering Information
Table 16 lists ordering information for the Cisco Catalyst 9300 Series. To place an order, visit the Cisco Ordering
home page at https://www.cisco.com/en/US/ordering/or13/or8/order_customer_help_how_to_order_listing.html.
Table 14.
Ordering Information
Switches
Product Number
Product Description
C9300-24T-E
Catalyst 9300 24-port data only, Network Essentials
C9300-24T-A
Catalyst 9300 24-port data only, Network Advantage
C9300-24P-E
Catalyst 9300 24-port PoE+, Network Essentials
C9300-24P-A
Catalyst 9300 24-port PoE+, Network Advantage
C9300-24U-E
Catalyst 9300 24-port UPOE, Network Essentials
C9300-24U-A
Catalyst 9300 24-port UPOE, Network Advantage
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 20 of 23
Switches
C9300-48T-E
Catalyst 9300 48-port data only, Network Essentials
C9300-48T-A
Catalyst 9300 48-port data only, Network Advantage
C9300-48P-E
Catalyst 9300 48-port PoE+, Network Essentials
C9300-48P-A
Catalyst 9300 48-port PoE+, Network Advantage
C9300-48U-E
Catalyst 9300 48-port UPOE, Network Essentials
C9300-48U-A
Catalyst 9300 48-port UPOE, Network Advantage
Network modules
Product Number
Product Description
C9300-NM-4G
Catalyst 9300 4 x 1GE Network Module
C9300-NM-4G=
Catalyst 9300 4 x 1GE Network Module, spare
C9300-NM-8X
Catalyst 9300 8 x 10GE Network Module
C9300-NM-8X=
Catalyst 9300 8 x 10GE Network Module, spare
C9300-NM-2Q
Catalyst 9300 2 x 40GE Network Module
C9300-NM-2Q=
Catalyst 9300 2 x 40GE Network Module, spare
C9300-NM-4M
Catalyst 9300 4 x MGig Network Module
C9300-NM-4M=
Catalyst 9300 4 x MGig Network Module, spare
Stacking cables
Product Number
Product Description
STACK-T1-50CM
50CM Type 3 Stacking Cable
STACK-T1-50CM=
50CM Type 3 Stacking Cable, spare
STACK-T1-1M
1M Type 3 Stacking Cable
STACK-T1-1M=
1M Type 3 Stacking Cable, spare
STACK-T1-3M
3M Type 3 Stacking Cable
STACK-T1-3M=
3M Type 3 Stacking Cable, spare
Software licenses
Product Number
Product Description
C9300-DNA-E-24-3Y
C9300 DNA Essentials, 24-port, 3 Year Term license
C9300-DNA-E-24-5Y
C9300 DNA Essentials, 24-port, 5 Year Term license
C9300-DNA-E-24-7Y
C9300 DNA Essentials, 24-port, 7 Year Term license
C9300-DNA-A-24-3Y
C9300 DNA Advantage, 24-port, 3 Year Term license
C9300-DNA-A-24-5Y
C9300 DNA Advantage, 24-port, 5 Year Term license
C9300-DNA-A-24-7Y
C9300 DNA Advantage, 24-port, 7 Year Term license
C9300-DNA-E-48-3Y
C9300 DNA Essentials, 48-port, 3 Year Term license
C9300-DNA-E-48-5Y
C9300 DNA Essentials, 48-port, 5 Year Term license
C9300-DNA-E-48-7Y
C9300 DNA Essentials, 48-port, 7 Year Term license
C9300-DNA-A-48-3Y
C9300 DNA Advantage, 48-port, 3 Year Term license
C9300-DNA-A-48-5Y
C9300 DNA Advantage, 48-port, 5 Year Term license
C9300-DNA-A-48-7Y
C9300 DNA Advantage, 48-port, 7 Year Term license
Power supplies
Product Number
Product Description
PWR-C1-350WAC=
350WAC power supply spare
PWR-C1-715WAC=
715WAC power supply spare
PWR-C1-1100WAC=
1100WAC power supply spare
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 21 of 23
Switches
Cisco StackWise-480 and StackPower cables
STACK-T1-50CM=
Cisco StackWise-480 50cm stacking cable spare
STACK-T1-1M=
Cisco StackWise-480 1m stacking cable spare
STACK-T1-3M=
Cisco StackWise-480 3m stacking cable spare
CAB-SPWR-30CM=
Cisco Catalyst 3850 StackPower cable 30cm spare
CAB-SPWR-150CM=
Cisco Catalyst 3850 StackPower cable 150cm spare
Spare power cords
CAB-TA-NA=
AC power cord for Cisco Catalyst (North America)
CAB-TA-AP=
AC power cord for Cisco Catalyst (Australia)
CAB-TA-AR=
AC power cord for Cisco Catalyst (Argentina)
CAB-TA-SW=
AC power cord for Cisco Catalyst (Switzerland)
CAB-TA-UK=
AC power cord for Cisco Catalyst (United Kingdom)
CAB-TA-JP=
AC power cord for Cisco Catalyst (Japan)
CAB-TA-250VAC-JP=
Japan 250VAC power cord for Cisco Catalyst (Japan)
CAB-TA-EU=
AC power cord for Cisco Catalyst (Europe)
CAB-TA-IT=
AC power cord for Cisco Catalyst (Italy)
CAB-TA-IN=
AC power cord for Cisco Catalyst (India)
CAB-TA-CN=
AC power cord for Cisco Catalyst (China)
CAB-TA-DN=
AC power cord for Cisco Catalyst (Denmark)
CAB-TA-IS=
AC power cord for Cisco Catalyst (Israel)
CAB-ACBZ-12A=
AC power cord for Cisco Catalyst (Brazil), 12A/125V BR-3-20 plug up to 12A
CAB-ACBZ-10A=
AC power cord for Cisco Catalyst (Brazil), 10A/250V BR-3-10 plug up to 10A
CAB-C15-CBN
Cabinet jumper power cord, 250VAC 13A, C14-C15 connectors
Optics online reference
The Cisco Catalyst 9300 Series supports a wide range of optics. Because the list of supported optics is updated on
a regular basis, consult the tables available here for the latest QSFP+, SFP+, and SFP compatibility information:
https://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html.
Cisco Capital
Financing to Help You Achieve Your Objectives
Cisco Capital® can help you acquire the technology you need to achieve your objectives and stay competitive. We
can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital
financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment.
And there’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 22 of 23
Printed in USA
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-738977-03
08/17
Page 23 of 23
Download PDF
Similar pages