FIELDBOOK
FIELDBOOK
7” 1024x600 Sunlight Readable TFT LCD
Intel® Atom™ Z530 1.6GHz CPU, 2GB RAM
IP54, sealed I/O ports, -20°C operating
XP Tablet/XP PRO embedded/Windows 7
Fully rugged MIL-STD-810G, drop resistant from 4 ft.
Twin hot-swappable lithium polymer battery packs
Wireless connectivity, integrated GPS
The FieldBook is the latest of the next generation of rugged compact handheld
computers. It runs full Windows XP or 7 on a 1024 x 600 widescreen sunlight
readable display. It’s twin Lithium Polymer battery packs are hot swappable for
continuous operation. All ports are sealed or have rain and dust proof doors.
FieldBook is MIL-STD-810 and IP54 certified and has been drop tested to 48
inches. Equip with GPS, UXGA camera, optional 802.11 b/g/i/n, RFID scanner or
bar code reader. FieldBook is perfect for field maintenance or logistics applications.
www.logic-instrument.com
FIELDBOOK
Monitor, capture communicate, test & measure with rugged performance
specifications
Name Fieldbook
Chassis Magnesium alloy chassis
Sealed ports and connectors
CPU Intel® Atom™ Z530 (1.6GHz - 512KB L2 cache)
RAM 2 GB DDRII 533
Video Controller Intel® GMA 500 with 3D graphics
Video RAM: 256 MB
HDD 120GB SATA 1.8’’ G-sensor
Optional : 16, 32 or 64GB Solid State Drive SSD
HDD Heater for low temperature option -20°C
Audio : Intel® HD audio, Monaural 1.5W built-in speaker
2 x Mic. Array for voice recognition
Status Indicators
Power, battery status, HDD status, radio power
SECURITY
Kensington lock, Administrator and Boot password
Optional : TPM Trusted Platform Module V1.2
Display 7“ TFT LCD with touchscreen, 1024 x 600 pixel (WVGA)
Build-in ambient light sensor to adjust LCD brightness
Touchscreen LCD, volume control
Control Buttons
Power on/off/suspend, Wireless on/off (WLAN & Blt.)
Security button : equal to Ctrl + Alt + Del in Windows OS
Four Direction Keys + Enter Key, Brightness control
I/O Ports
Config #1 : 2x USB 2.0 & 1x RS232
Config #2 : 2x USB 2.0 & 1x RJ45 & 2x Audio jack
Config #3 : 1x USB 2.0 + 1x RS232 + 1x RJ45
Config #4 : 2x RS232
Docking port for office or vehicle dock + DC input jack
Expansion Slots
1x PCMCIA or Express Card 54 slot
1x SD Memory Card
Communication
Camera 2Mp-UXGA auto-focus
WLAN – Intel WiFi Link 5100(802.11 a/b/g/n) *
Optional: GPS receiver (+ external GPS antenna over cradle)
HSDPA 3G Mobile broadband (WWAN)
BlueTooth 2.1+EDR
RFID scanner 13.56MHz
1D/2D barcode reader
Power Adapter
DC Input : 100V–240V AC, 50Hz/60Hz
Optional DC Input: MIL-STD-1275 vehicle adapter
BATTERY : 2x Li-Polymer 7.4V, 2500mAh
Hot Swappable
DimensionS : 9.2” W x 5.9” H x 1.9” D (Includes corner bumbers)
Weight : 2.4 lb.
Options & Accessories
Car Adapter
Desktop Cradle *
Hand-strap
Sealed I/O Connector
* Desktop docking cradle :
4x USB, 1x RJ-45, 1x RS232, 1x DC-in, 1x VGA
2 bay battery charger
1x antena port for external GPS antenna
Vehicle docking :
4x USB, 1x RJ-45, 1x RS232, 1x DC-in, 1x VGA
1x antena port for external GPS antenna
I/O Configurations
2
3
1
4
Environmental specifications
STANDARDS / TESTS
storage
operating
-40°F to 185°F
32°F to 122°F
Optional -4°F
Temperature MIL-STD-810G
Methods 501.5, 502.5
Thermal shock
MIL-STD-810G
Method 503.5
Relative Humidity
MIL-STD-810G
Method 507.5
Dust Protection IP5x
IEC 60529 /AC2:2007
Tested
Water Protection
IPx4
IEC 60529 /AC2:2007
Tested
Rain chamber to operate at no less than 40 PSIG and no less than 4 in/hr.
10 min per axis, 6 axes
Vibration
MIL-STD-810G
Method 514.6 Procedure I
Cat. 24,
Fig. 514.6 C-17 & 514.6 C-18
Functional Shock
MIL-STD-810G
Method 516.6 Procedure I
40 g (peak) half-sine, 11 ms, 3 axis, 2 directions, 18 shocks total
Crash Shock
MIL-STD-810G
Method 516.6 Procedure V
75 g (peak) half-sine, 8 to 13 ms, 3 axis x 6 shocks, 18 shocks total
Drop
MIL-STD-810G
Method 516.6 Procedure VI
48 in (122cm) drop,
over concrete, each edge, face and corner
26 drops total (@ ambient temp)
Transit Drop
MIL-STD-810G
Method 516.6 Procedure IV
30 in (76cm) drop,
over concrete, each edge, face and corner
26 drops total (@ ambient temp)
Salt Fog
MIL-STD-810G
Method 509.5
180°F / min
-4°F to 122° F
30 min cycles x 4 cycles
95% @ 140°F RH, non condensing
5 x 48 hr cycles
0.04 g2/Hz; 20 at 1000 Hz ; -6 dB/octave 1000 to 2000 Hz
ASTM 4169-99 Truck Assurance Level II, Schedule E
5% salt solution @ 94°F
48 hr wet, 48 hr dry
* Specifications are subject to change without prior notice
NORTH AMERICA
TEL: +1 410 363 3405
usa@logic-instrument.com
GERMANY/AUSTRIA/Switzerland
TEL: +49 89 666 287 6
dach@logic-instrument.com
WORLDWIDE / FRANCE
TEL : +33 1 39 35 61 61
global@logic-instrument.com
3
4
5
Left side
Right side
6
7
8
9
6
16
10
17
11
18
12
1
2
13
19
14
20
Left side
1
Kensington Lock
2
DC in (Power in)
Top side
Front side
6
Microphone
7
Light sensor
8
LED indicators
9
Speaker
3
Optional : RFID scanner
and Barecode reader
4
Express card +
SD slot
Optional :
PCMCIA slot
HSDPA SIM card slot
10 Power ON
Optional GPS
11 Directional key
5
Bottom side
Right side
15
16
Audio in
17
Headphones
18
USB 2.0
19
RJ45 Ethernet
20
USB 2.0
Docking Port
12 Wireless ON/OFF
13 Windows Security
14 Functions key
CUSTOMIZATION
Logic Instrument’s Special and Customization group can modify the FieldBook configuration to adapt it to specific applications, like adding MILSPEC
connectors, special mounting brackets, add-in electronics. Please inquire.
Configurable rear-mount
Mission Box
Built-in waterproof Lemo connectors
for 2 RS232 ports
Desktop docking cradle
www.logic-instrument.com
Vehicle docking
Station
FIELDBOOK
15
FIELDBOOK IN ACTION
Diagnostic and maintenance tools for vehicles
Police vehicle terminal
Real time transmisions and geolocation for
big city motorcycle taxi service
Universal standalone analysis and
maintenance equipment (digital multimeter,
oscilloscope, RF testing...)
Interactive electronic technical manuals
Tactical terminal for soldier
About Logic instrument
Logic Instrument is an international company with major facilities in France, the US and in Germany specializing in rugged computers
and displays with original roots as a computer-based instrumentation company started in 1987. Logic Instrument’s Tetra products are
designed, tested and manufactured to MILSPECs, IEC and NEMA standards in our ISO-9001 certified facilities.
Products are developed on 3D solid modeling systems optimized for direct interface with our 7 axis milling machine that allows rapid
prototyping and manufacturing of customer specific special components. Systems are assembled, tested and verified in accordance
with our ISO-9001 certification.
NORTH AMERICA
TEL: +1 410 363 3405
usa@logic-instrument.com
GERMANY/AUSTRIA/Switzerland
TEL: +49 89 666 287 6
dach@logic-instrument.com
WORLDWIDE / FRANCE
TEL : +33 1 39 35 61 61
global@logic-instrument.com
© 2010 Logic instrument. All rights reserved.