Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
User manual
MCD1165
1Important2
Safety2
2 Your micro system4
Introduction4
What's in the box
4
Overview of the main unit
5
Overview of the remote control
6
3Connect8
Place the unit
Connect speakers
Connect video cables
Connect an external audio device
Connect power
8
8
8
9
9
4 Get started10
Prepare the remote control
Set clock
Turn on
Find the correct viewing channel
Select the correct TV system
Change system menu language
Turn on Progressive Scan
10
10
10
11
11
11
11
7 Listen to the radio16
Tune to a radio station
Program radio stations automatically
Program radio stations manually
Select a preset radio station
16
16
16
16
8 Other features17
Set the alarm timer
Set the sleep timer
Listen to an external device
17
17
17
9 Adjust settings18
General setup
18
Video setup
18
Audio setup
18
Preferences19
10 Product information21
Specifications
Supported disc formats
USB playability information
21
22
22
5Play12
Play from disc
12
Play from USB or recored discs
13
Play a slideshow with background music 13
Resume video play from last stopped
point13
Control play
14
Play options
14
Change the audio channel
14
6 Enjoy karaoke15
Adjust Karaoke settings
15
EN
1
English
Contents
1Important
Safety
This 'bolt of lightning' indicates uninsulated
material within the device may cause an
electrical shock. For the safety of everyone in
your household, please do not remove the
covering.
The 'exclamation mark' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WARNING: To reduce the risk of fire or electric
shock, the device should not be exposed to rain
or moisture and objects filled with liquids, such
as vases, should not be placed on the device.
CAUTION: To prevent electric shock, fully
insert the plug. (For regions with polarized
plugs: To prevent electric shock, match wide
blade to wide slot.)
•
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the device.
•
Only use attachments/accessories specified
by the manufacturer.
•
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the device.
When a cart is used, use caution when
moving the cart/device combination to
avoid injury from tip-over.
•
Unplug this device during lightning storms
or when unused for long periods of time.
•
Refer all servicing to qualified service
personnel. Servicing is required when the
device has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the device, the device has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
•
Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
Important Safety Instructions
•
Follow all instructions.
•
Heed all warnings.
•
Do not use this device near water.
•
Clean only with dry cloth.
•
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
•
Do not install near an heat sources such
as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce
heat.
2
EN
• Install the battery correctly, + and - as
marked on the device.
• The battery (packed or installed) shall
not be exposed to excessive heat such
as sunshine, fire or the like.
• Remove the battery when the device
is not used for a long time.
•
The device shall not be exposed to
dripping or splashing.
•
Do not place any sources of danger on
the device (e.g. liquid filled objects, lighted
candles).
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
English
•
Warning
•• Never remove the casing of this device.
•• Never lubricate any part of this device.
•• Never place this device on other electrical equipment.
•• Keep this device away from direct sunlight, naked
flames or heat.
•• Never look into the laser beam inside this device.
•• Ensure that you always have easy access to the power
cord, plug, or adaptor to disconnect this device from
the power.
EN
3
2 Your micro
system
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
DVD region code
Countries
Latin America
What's in the box
Check and identify the contents of your
package: [Fig. 1]
•
Main unit
•
2 x speakers
With this unit, you can:
•
1 x composite video cable (yellow)
•
•
1 x AC power cord
•
Remote control (with two AAA batteries)
•
User manual
Watch video from DVD/VCD/SVCD, or
USB storage devices;
• enjoy audio from discs, USB storage
devices, or other external devices;
• enjoy Karaoke by connecting a
microphone.
• view pictures from discs or USB storage
devices;
• listen to FM radio stations.
You can enrich sound output with below
sound effect:
Digital Sound Control (DSC)
• DSC 1: Balanced
• DSC 2: Clear
• DSC 3: Powerful
• DSC 4: Warm
• DSC 5: Bright
The unit supports these media formats:
STANDBY
SOURCE
EJECT
VOLUME
DISC/USB
FM/AUX
SUBTITLE/PRESET
OK
AUDIO/PRESET
SOUND
MIC IN
1
2
4
5
7
8
9
MENU
0
DISPLAY
OPTION
PROG
CLOCK SET
3
6
TIME
SLEEP
•
4
EN
Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
SOURCE
VOLUME
AUDIO IN
English
Overview of the main unit
[Fig. 2]
k
j
i
a
b
c
h
d
e
g
f
i
a
• Turn the unit on or off.
• Press to tune to a radio station.
• Switch to standby mode or Eco
standby mode.
b SOURCE
• Select a source: DISC, USB, FM, AUX.
c Display panel
• Show current status.
d
/
• Skip to the previous/next track.
• Press and hold to search for radio
stations automatically.
j VOLUME +/• Adjust volume.
k
• Start, pause, or resume play.
• Jack for a USB device.
e MIC IN
• Connect a microphone.
f Disc compartment
g
• Open/close the disc compartment.
h
• Stop play.
EN
5
e
Overview of the remote
control
/
• Navigate through the menu.
• Skip to previous/next album.
• Select a preset radio station.
[Fig. 3]
• Set subtitle or audio language.
a
b
c
STANDBY
EJECT
DISC/USB
FM/AUX
SUBTITLE/PRESET
d
u
t
• Set time.
f
• Return to previous display menu.
g +/-
s
OK
e
• Adjust volume.
h
f
AUDIO/PRESET
SOUND
g
h
i
j
k
l
1
2
3
4
5
6
7
8
9
MENU
0
DISPLAY
OPTION
PROG
TIME
CLOCK SET
SLEEP
r
q
p
o
/
• Skip to previous or next title, chapter,
track, or file.
i Numeric buttons
• Select a title/chapter/track to play.
• Select a preset number.
j MENU
n
m
• Access the DISC/USB menu.
k OPTION
• In DISC/USB play mode, press to
select preferred play options.
l PROG/CLOCK SET
a
• Program radio stations.
/STANDBY
• Set the clock.
• Turn the unit on or off.
m TIME/SLEEP
• Access the system menu.
n DISPLAY
b
c DISC/USB
• Select DISC or USB source.
d
/
(
/
)
• Navigate through the menu.
• Search within a track/disc/USB.
• Tune to a radio station.
6
• View clock information.
• Switch to standby mode or Eco
standby mode.
EN
• Set alarm timer or sleep timer.
• View playback information.
o
• Start, pause, or resume play.
p
• Stop play.
• During scanning, press to stop the
process.
q
English
• Mute or restore volume.
r SOUND
• Enrich sound effect with Digital Sound
Control (DSC).
s OK
• Confirm a selection.
t FM/AUX
• Select FM or AUX source.
u EJECT
• Press to open or close the disc
compartment.
EN
7
3Connect
[Fig. 4]
SPEAKER OUT
Place the unit
Connect video cables
You can select the best video connection that
your TV supports.
1
2
Place the unit near to the TV.
Place the left and right speakers at equal
distance from the TV and at an angle
of approximately 45 degrees from the
listening position.
Note
•• To avoid magnetic interference or unwanted noise,
never place this apparatus and speakers too close to
any radiation devices.
•• Place this unit on top of a table or mount it on the wall.
•• Never place this unit in an enclosed cabinet.
•• Install this unit near the AC outlet where the AC power
plug can be easily reached.
Connect speakers
Note
•• For optimal sound, use the supplied speakers only.
•• Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifications section of this manual.
8
EN
•
Option 1: Connect through a composite
video (CVBS) cable (for a standard TV).
•
Option 2: Connect through component
video cables (for a standard TV or
Progressive Scan TV).
Option 1: Connect through a
composite video cable
Connect the composite video cable (supplied)
to: [Fig. 5]
• the VIDEO socket on the back of the
unit.
• the video input socket on the TV.
TV
Option 2: Connect through
component video cables
English
Connect power
Caution
Note
•• Risk of product damage! Ensure that the power supply
•• The progressive scan video quality is only available
when a progressive scan TV is connected.
•• If your TV does not support progressive scan, you
cannot view the picture.
•• For how to activate progressive scan on your TV, refer
to the TV user manual.
Connect a progressive scan TV through
component video for higher quality video.
Connect component video cables (green/red/
blue - not supplied) to: [Fig. 6]
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•• Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•• Before you connect the AC power cord, ensure that
you have completed all other connections.
[Fig. 7]
• the component (Y, Pr, and Pb) sockets
on the back of the unit.
• the component input sockets on the
TV.
TV
COMPONENT VIDEO INPUT
Y
Pr
Pb
Connect an external audio
device
Connect audio cables (red/white - not supplied)
to:
• the AUDIO IN (L and R) sockets on
the back of the unit.
• the audio output sockets on the
external audio device.
EN
9
4 Get started
Set clock
Caution
1
In standby mode, press and hold CLOCK
SET on the remote control for more than
two seconds.
»» [24H] or [12H] hour format is
displayed.
2
Press / (or +/-) to select [24H] or
[12H] hour format
3
Press CLOCK SET to confirm.
»» The hour digits are displayed and begin
to blink.
4
Repeat steps 2-3 to set hour and minute.
•• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Note
•• If no button is pressed in 90 seconds, the system exits
Prepare the remote control
Caution
•• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•• Risk of decreased battery life! Never mix different
clock setting mode automatically.
Tip
•• You can view clock information in Eco power mode by
pressing CLOCK SET.
brands or types of batteries.
•• Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
To insert the remote control battery: [Fig. 8]
1
2
Open the battery compartment.
3
Close the battery compartment.
Insert the supplied AAA batteries with
correct polarity (+/-) as indicated.
a
10
EN
b
Turn on
Press .
»» The unit switches to the last selected
source.
Switch to standby mode
c
Press again to switch the unit to standby
mode.
»» The clock (if set) is displayed on the
panel.
Switch to ECO standby mode:
Press and hold for more than two seconds.
»» The display panel is dimmed.
•• The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
Switch between standby mode and ECO
standby mode:
Press and hold for more than two seconds.
Find the correct viewing
channel
1
2
Press DISC to switch to disc mode.
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
• Go to the lowest channel on your TV,
and then press the Channel Down
button until you see the blue screen.
• Press the source button repeatedly on
the remote control of your TV.
Tip
•• The video-in channel is between the lowest and highest
channels and may be called FRONT, A/V IN, VIDEO etc.
See the TV user manual on how to select the correct
input on the TV.
Select the correct TV system
Change this setting if the video is not displayed
correctly. By default, this setting matches the
most common setting for TVs in your country.
1
2
3
Press
.
Select [Setup] -> [Video] -> [TV System].
Select a setting and press OK.
4
5
To return to the previous menu, press
To exit the menu, press
.
.
Change system menu language
1
2
Press
3
4
Select a setting and then press OK.
.
Select [Setup] -> [General] -> [OSD
Language], and press OK.
To exit the menu, press
.
Turn on Progressive Scan
Progressive scan displays twice the number of
frames per seconds than interlaced scanning
(ordinary TV system). With nearly double the
number of lines, progressive scan offers higher
picture resolution and quality.
Before you turn on this feature, make sure that:
•
the TV supports progressive scan signals.
•
you have connected the unit with the TV
through component video.
1
2
Turn on the TV.
3
Switch the TV to the correct viewing
channel for this unit.
4
5
Press DISC, and then press
Make sure that the TV progressive scan
mode is deactivated (see the TV user
manual).
.
Select [Setup] -> [Video] -> [Progressive]
-> [On], and then press OK.
»» The progressive setup is complete.
• [PAL] - For TV with PAL color system.
• [Multi] - For TV that is compatible with
both PAL and NTSC.
EN
11
English
• [NTSC] - For TV with NTSC color
system.
Note
5Play
Use the disc menu
Play from disc
Caution
•• Risk of product damage! Never play discs with
accessories such as disc stabilizer rings or disc
treatment sheets.
•• Never put any objects other than discs into the disc
compartment.
1
Press DISC/USB repeatedly to select DISC
source. [Fig. 9]
2
3
Press
4
Press to close the disc compartment.
»» Play starts automatically.
Select an audio language
to open the disc compartment.
Insert a disc with the printed side facing
upward.
DISC/USB
When you load a DVD/(S)VCD disc, a menu
may be displayed on the TV screen.
Press MENU to access or exit disc menu
manually.
For VCD with PlayBack Control (PBC) feature
(version 2.0 only):
With the PBC feature, you can play VCD
interactively according to the menu screen.
During play, press MENU to enable/disable PBC.
»» When PBC is enabled, the menu
screen is displayed.
»» When PBC is disabled, normal play is
resumed.
During disc play, press AUDIO to select an
audio language for a DVD or DivX (Home
Theater 3.1) video.
»» The language options are displayed.
If the selected audio channel is
unavailable, the default disc audio
channel is used.
SOURCE
VOLUME
Note
EJECT
STANDBY
DISC/USB
FM/AUX
SUBTITLE/PRESET
AUDIO IN
OK
•• For some DVDs, the language can only be changed
AUDIO/PRESET
SOUND
1
2
6
5
7
8
9
MENU
0
DISPLAY
OPTION
PROG
TIME
CLOCK SET
from the disc menu. Press MENU to access the menu.
3
4
SLEEP
If play does not start automatically:
Select a title/chapter/track and then press
.
Tip
•• To play a locked DVD, enter the 6-digit parental control
password.
Select a subtitle language
During play, press SUBTITLE repeatedly to
select a subtitle language for a DVD or DivX
(Home Theater 3.1) video.
Note
•• For some DVDs, the language can only be changed
from the disc menu. Press MENU to access the disc
menu.
12
EN
Play a slideshow with
background music
You can play DivX (Home Theater 3.1)/MP3/
JPEG picture files copied onto a CD-R/RW,
recordable DVD, or USB storage device.
This device can play MP3 files and JPEG photos
simultaneously.
1
Note
Select a source.
• Press DISC/USB repeatedly to select
DISC or USB source.
2
Insert a USB storage device or disc. [Fig. 10]
»» The play starts automatically.
DISC/USB
EJECT
STANDBY
DISC/USB
FM/AUX
SUBTITLE/PRESET
FM
OK
SOURCE
VOLUME
AUDIO/PRESET
SOUND
1
4
2
5
3
6
AUDIO IN
7
MENU
OPTION
8
9
0
DISPLAY
PROG
CLOCK SET
TIME
•• The MP3 and JPEG files must be stored on the same
disc or USB storage device.
1
2
Play an MP3 file.
Navigate to the photo folder/album and
press
to start the slideshow.
»» Slideshow begins and continues till the
end of the photo folder or album.
»» Audio continues till the end of the last
file.
SLEEP
• To return to the previous menu, press
.
• To stop the slideshow, press .
To select a specified file to play:
1
2
Press
to stop play.
Press / to select a folder, and then
press OK to confirm.
• To return to the previous menu, press
.
3
4
Press
Press
/
to select a file from the folder.
to start play.
Note
•• You can only play DivX (Home Theater 3.1) videos
Resume video play from last
stopped point
Note
•• This feature is only available for CD/DVD/VCD/DivX
play.
In stop mode and when the disc has not been
.
removed, press
To cancel resume mode and stop play
completely:
In stop mode, press .
rented or purchased through the DivX registration
code of this unit.
•• Subtitle files with the following filename extensions (.srt,
.smi, .sub, .ssa, .ass) are supported but do not appear on
the file navigation menu.
•• The subtitle filename has to be the same as the file
name of the video.
EN
13
English
Play from USB or recored
discs
Control play
/
/ (
)
/
/
+/SOUND
DISPLAY
Select a folder.
Fast backward/forward.
Skip to previous or next title/
chapter/track/file.
Pause or resume play.
Stop play.
Increase or decrease the volume.
Mute or restore sound.
Enrich sound effect with DSC:
balanced, clear, powerful, warm,
and bright.
View playback information.
•
[GOTO]: during video play, specify a
position to start play by entering the
desired time or number.
•
[Slow Backward] & [Slow Forward]:
during video play, select a slow backward/
forward speed.
Change the audio channel
Note
•• This feature is only available for VCDs and DivX (Home
Theater 3.1) videos.
During play, press AUDIO repeatedly to select
an audio channel available on the disc:
• [Mono Left]
Play options
• [Mono Right]
In DISC/USB play mode, press OPTION
(option) to select different play options.
• [Stereo]
•
[PBC]: turn PlayBack Control on/off.
•
[Aspect Ratio]: select a picture display
format to fit the TV screen.
•
[Angle]: switch between camera angles.
Note
•• Some DVDs contain alternate scenes, such as scenes
recorded from different camera angles. For such DVDs,
you can select from the available alternate scenes.
•
[Microphone] turn on or off the
microphone sound output.
•
[Karaoke Setup] set different volumes of
karaoke disc.
•
[Vocal]: select various Karaoke audio
modes, or turn off original vocal.
•
[Zoom]: during video play, zoom in/out to
pan through the image.
•
[Repeat]: choose a repeat play option or
turn off the repeat function.
14
EN
• [Mix-Mono]
You can connect a microphone (not supplied)
to sing along with a music source.
Note
•• Before you connect a microphone, set the microphone
volume to the minimum to prevent howling.
1
2
Insert a Karaoke disc.
3
4
Press
5
Play a Karaoke disc and sing through the
microphone.
Connect a microphone to the MIC IN jack
on this product.
, and then select [Karaoke].
Turn on the microphone sound output
(see "Adjust karaoke settings").
1) In the [Karaoke Scoring] option, select a
level (basic/intermediate/advance).
2) In the [Karaoke Idol] option, turn on the
contest.
»» The song selection menu is displayed.
3) Input a track (VCD/SVCD) or a title/
chapter (DVD) as the first song. Up to 4 songs
can be selected.
4) Then select [Start] and press OK to start
play selected songs.
»» After all the selected songs end, a contest result is displayed.
•
[Key Shift]: adjust the pitch level that
matches your voice.
•
[Vocal]: select various Karaoke audio
modes, or turn off original vocal.
Adjust Karaoke settings
•
[Microphone]: turn on or off the
microphone sound output.
•
[Mic Volume]: adjust the microphone
volume.
•
[Echo Level]: adjust echo level.
•
[Karaoke Scoring]: turn off the function of
Karaoke scoring or select a scoring level
(basic/intermediate/advance). If a level is
selected, the score is displayed after each
song ends.
•
[Karaoke Idol]: compete for singing up to
4 songs among different signers, and the
contest result is displayed.
EN
15
English
6 Enjoy karaoke
7 Listen to the
radio
Tune to a radio station
Tip
•• Position the antenna as far as possible from TV, VCR, or
other radiation source.
•• For optimal reception, fully extend and adjust the
position of the antenna.
1
Press FM/AUX repeatedly to select FM
source.
2
Press and hold / (
/
) for more
than two seconds.
»» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station:
/
) repeatedly until you find
Press / (
optimal reception.
Program radio stations
automatically
Note
•• You can program a maximum of 20 preset radio
stations (FM).
In tuner mode, press and hold PROG for
more than two seconds to activate automatic
programming.
»» [AUTO] (auto) is displayed.
»» All available stations are programmed
in the order of waveband reception
strength, and the first programmed
radio station is broadcast automatically.
16
EN
Program radio stations
manually
1
2
Tune to a radio station.
3
Press PROG to confirm.
»» [SAVE] (save) is displayed.
4
Repeat steps 2-3 to program more
stations.
Press PROG, and then press
select a number from 1–20.
/
to
Note
•• To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press / (or press a number
directly) to select a preset radio station.
Set the alarm timer
This unit can be used as an alarm clock. You can
select CD, FM, or USB as alarm source.
Note
•• Make sure that you have set the clock correctly.
1
2
3
4
In standby mode, press and hold TIME/
SLEEP for more than two seconds.
»» The hour digits are displayed and begin
to blink.
Press
/
(or +/-) repeatedly to set hour.
Press TIME/SLEEP to confirm.
»» The minute digits are displayed and
begin to blink.
Repeat steps 2-3 to set minute, select a
source (disc, USB, or tuner), and adjust
volume.
Set the sleep timer
English
8 Other features
To set the sleep timer, in turn on mode, press
TIME/SLEEP repeatedly to select a set period
of time (in minutes).
»» When sleep timer is activated, is
displayed.
To deactivate sleep timer:
Press TIME/SLEEP repeatedly until [SLP OFF]
(sleep off) is displayed.
»» When sleep timer is deactivated,
disappears.
Listen to an external device
You can listen to an external device through this
unit with an MP3 link cable (not supplied).
1
Make sure that the external audio device is
connected to this device (see "Connect an
external audio device").
2
Press FM/AUX repeatedly to select AUX
source.
3
Start to play the external device (see the
device user manual).
Note
•• If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
Press TIME/SLEEP repeatedly to activate or
deactivate the alarm.
»» If timer is activated, is displayed.
Tip
•• If disc/USB source is selected, but no disc is placed or
no USB connected, the system switches to the tuner
source automatically.
EN
17
9 Adjust settings
•
[Multi] - For TV that is compatible with
both PAL and NTSC.
[NTSC] - For TV with NTSC color
system.
[TV Display]
The TV format determines the aspect ratio of
display according to the type of TV you have
connected.
•
1
2
3
Press
.
Select the [Setup] page.
Select a setting and press OK.
• To return to the previous menu, press
.
• To exit the menu, press
.
4:3 Pan Scan (PS)
General setup
On the [General] page, you can set the
following options:
[Disc Lock]
Lock or unlock a disc.
[OSD Language]
Select the preferred language for on-screen
display.
[DivX(R) VOD Code]
Display the DivX(R) registration code.
•• Enter this DivX registration code when you rent or
purchase a video from http://vod.divx.com/. The DivX
videos rented or purchased through the DivX® VOD
(Video On Demand) service can be played only on the
device to which it is registered.
Video setup
On the [Video] page, you can set the following
options:
[TV System]
Change this setting if the video is not displayed
correctly. By default, this setting matches the
most common setting for TVs in your country.
•
[PAL] - For TV with PAL color system.
18
EN
16:9 (Wide Screen)
•
[4:3 Pan Scan] – For 4:3 screen TV: fullheight display with the trimmed sides.
•
[4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars on the
top and bottom of the screen.
[16:9] – For wide-screen TV: display ratio
16:9.
[Progressive]
Set the video output according to the video
connection. If the composite connection is used,
this setting is not required.
•
•
Note
4:3 Letter Box (LB)
[On] – turn on progressive scan.
• [Off] – turn off progressive scan.
[Picture Setting]
Select a predefined set of picture color settings.
•
[Standard] – Original color setting.
•
[Bright] – Vibrant color setting.
•
[Soft] - Soft color setting.
•
[Personal] – Customizes the color setting.
Set the level of brightness, contrast, tint,
and color saturation, and then press OK.
Audio setup
On the [Audio] page, you can set the following
options:
[Surround Mode]
[Stereo]
• [LT/RT]
[Sound Mode]
Turn off or select your preferred sound mode.
•
[3D]
•
[Movie Mode]
• [Music Mode]
[Night Mode]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
•
[On] – enjoy quiet viewing at night (DVDs
only).
•
[Off]– enjoy surround sound with its full
dynamic range.
1) Press OK.
2) Select a rating level, and then press OK.
3) Press the numeric keys to enter the
password.
Note
•• Rated discs above the level you set in [Parental
Control] require a password to be played.
•• The ratings are country-dependent. To allow all discs to
play, select [8 Adult].
•• Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
[PBC]
Play VCD interactively according to the menu
screen.
•
Preferences
On the [Preference] page, you can set the
following options:
[Audio]
Select the preferred audio language for disc play.
[Subtitle]
Select the preferred subtitle language for disc
play.
[Disc Menu]
Select the preferred disc menu language.
Note
•• If the language you have set is not available on the disc,
the disc uses its own default language.
•• For some discs, the subtitle/audio language can only be
changed from the disc menu.
[Parental Control]
Restrict access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
English
•
[On]: the menu screen is displayed.
• [Off]: normal play is resumed.
[Password]
This setting allows you to change the password
for parental control. The default password is
000000.
1) Press the numeric keys to enter '000000'
or your last set password at [Old Password]
field.
2) Enter the new password at [New
Password] field.
3) Enter the new password again at [Confirm
PWD] field.
4) Press OK to exit the menu.
Note
•• If you forget the password, enter '000000' before you
set a new password.
[DivX Subtitle]
Select a character set that supports the DivX
subtitle.
EN
19
Note
•• Ensure that the subtitle file has the exact same file
name as the movie file. If for example the file name of
the movie is ‘Movie.avi’, and then you will need to name
the text file ‘Movie.sub’ or ‘Movie.srt’.
[Version Info]
Display the software version of this device.
[Default]
Reset all the settings to factory default, except
for the password and parental settings.
20
EN
Note
•• Product information is subject to change without prior
notice.
Specifications
Amplifier
Maximum Output Power
Frequency Response
Signal to Noise Ratio
Total Harmonic Distortion
Aux Input
70 W
60 Hz - 16 kHZ;
±3 dB
≥70 dB
<1%
600 mV RMS
Sensitivity
4 ohm
3.5" woofer + 20
mm tweeter
>84 dB/m/W
Tuner (FM)
Tuning Range
Tuning grid
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
Search Selectivity
Total Harmonic Distortion
Signal to Noise Ratio
Laser Type
Disc Diameter
Video Decoding
Video DAC
Signal System
Video Format
Video S/N
Audio DAC
Total Harmonic
Distortion
Frequency Response
Frequency Response
S/N Ratio
Semiconductor
12 cm/8 cm
MPEG-1 / MPEG-2 /
DivX
12 Bits
PAL / NTSC
4:3 / 16:9
>57 dB
24 Bits / 96 kHz
<1% (1 kHz)
4 Hz - 20 kHz (44.1
kHz)
4 Hz - 22 kHz (48 kHz)
4 Hz - 24 kHz (96 kHz)
60 Hz - 16 kHZ; ±3 dB
>70 dBA
General information
Speakers
Speaker Impedance
Speaker Driver
Disc
English
10Product
information
87.5-108 MHz
50 KHz
<22 dBf
<45 dBf
<30 dBf
<3%
>45 dB
AC power
Operation Power
Consumption
Eco Standby Power
Consumption
Dimensions
- Main Unit (W x H
x D)
- Speaker Box (W x
H x D)
- Subwoofer (W x
H x D)
Weight
- Main Unit
- Speaker Box
- Subwoofer
100-240 V~, 50/60 Hz
28 W
<0.5 W
180 x 121 x 239 mm
120 x 170 x 160 mm
170 x 265 x 250 mm
1.6 kg
2 x 1.2 kg
2.7 kg
USB
USB Direct Version
USB 5 V Power
2.0 full speed
≤500 mA
EN
21
Supported disc formats
•
Digital Video Discs (DVDs)
•
Video CDs (VCDs)
•
Super Video CDs (SVCDs)
•
Digital Video Discs + Rewritable
(DVD+RW)
•
Compact Discs (CDs)
•
Picture (Kodak, JPEG) files on CDR(W)
•
DivX(R) disc on CD-R(W):
• DivX 3.11, 4.x and 5.x
Supported MP3-CD formats:
•
ISO 9660
•
Max. title/album name: 12 characters
•
Max. title number plus album: 255.
•
Max. nested directory: 8 levels.
•
Max. album number: 32.
•
Max. MP3 track number: 999.
•
Supported sampling frequencies for MP3
disc: 32 kHz, 44.1 kHz, 48 kHz.
•
Supported Bit-rates of MP3 disc are: 32, 64,
96, 128, 192, 256 (kbps).
The following formats are not supported:
• Files like *.VMA, *.AAC, *.DLF, *.M3U,
• *.PLS, *.WAV
• Non-English Album/Title name
• Discs recorded in Joliet format
• MP3 Pro and MP3 with ID3 tag
USB playability information
Compatible USB devices:
• USB flash memory (USB2.0 or
USB1.1)
• USB flash players (USB2.0 or USB1.1)
• memory cards (requires an additional
card reader to work with this unit)
22
EN
Supported USB formats:
• USB or memory file format: FAT12,
FAT16, FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
• Directory nesting up to a maximum of
8 levels
• Number of albums/ folders: maximum
99
• Number of tracks/titles: maximum 999
• ID3 tag v2.0 or later
• File name in Unicode UTF8 (maximum
length: 32 bytes)
Unsupported USB formats:
• Empty albums: an empty album is an
album that does not contain MP3/
WMA files, and will not be shown in
the display.
• Unsupported file formats are skipped.
For example, word documents (.doc)
or MP3 files with extension .dlf are
ignored and not played.
• WMA, AAC, WAV, PCM audio files
• DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
• WMA files in Lossless format
Warning
•• Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
No power
•• Make sure that the AC power cord of the
device is connected properly.
•• Make sure that there is power at the AC
outlet.
•• As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
No sound or poor sound
•• Adjust the volume.
•• Check that the speakers are connected
correctly.
•• Check if the stripped speaker wires are
clamped.
Remote control does not work
•• Before you press any function button, first
select the correct source with the remote
control instead of the main unit.
•• Reduce the distance between the remote
control and the unit.
•• Insert the battery with its polarities (+/–
signs) aligned as indicated.
•• Replace the battery.
•• Aim the remote control directly at the
sensor on the front of the unit.
No disc detected
•• Insert a disc.
•• Check if the disc is inserted with printed
side facing upward.
•• Wait until the moisture condensation at
the lens has cleared.
•• Replace or clean the disc.
•• Use a finalized CD or correct format disc.
Disc does not play
•• Check if the disc is readable.
•• Check the disc type, color system and
regional code. Check for any scratches or
smudges on the disc.
•• Press to exit the system setup menu.
•• Disable the password for parental control
or change the rating level.
•• Moisture has condensed inside the system.
Remove the disc and leave the system
turned on for about an hour. Disconnect
and reconnect the AC power plug, and
then turn on the system again.
No picture
•• Check the video connection.
•• Turn on the TV to the correct Video-In
channel.
•• Progressive scan is activated but the TV
does not support progressive scan.
Black and white or distorted picture
•• The disc does not match the TV color
system standard (PAL/NTSC).
•• Sometimes a slight picture distortion may
appear. This is not a malfunction.
•• Clean the disc.
•• A distorted picture may appear during
progressive scan setup.
The aspect ratio of the TV screen cannot be
changed even though you have set the TV
display format.
•• The aspect ratio is fixed on the loaded
DVD disc.
•• The aspect ratio may not be changed for
some TV systems.
EN
23
English
11Troubleshooting
DivX video files cannot be played.
•• Ensure that the DivX video file is
complete.
•• Ensure that the file extension is correct.
•• Due to Digital Rights issue, the DRMprotected video files cannot be played
through an analog video connection (e.g.
composite, component and scart). Transfer
the video content onto the Disc Media
and play these files.
Audio or subtitle languages cannot be set
•• The disc is not recorded with sound or
subtitles in multiple languages.
•• The audio or subtitle language setting is
prohibited on the disc.
Cannot display some files in USB device
•• The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
•• The formats of these files are not
supported.
USB device not supported
•• The USB device is incompatible with the
unit. Try another one.
Poor radio reception
•• Increase the distance between the unit and
your TV or VCR.
•• Fully extend the FM antenna.
Timer does not work
•• Set the clock correctly.
•• Switch on the timer.
Clock/timer setting erased
•• Power has been interrupted or the power
cord has been disconnected.
•• Reset the clock/timer.
24
EN
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
Please visit www.recycle.philips.com for additional
information on a recycling center in your area.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
English
12Notice
Manufactured under license from Dolby
Laboratories.
"Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
'DVD Video' is a trademark of DVD Format/
Logo Licensing Corporation.
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an official DivX
Certified® device that plays DivX video. Visit
divx.com for more information and software
tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND:This DivX
Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD)
movies.To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go
to vod.divx.com for more information on how to
complete your registration.
DivX®, DivX Certified® and associated logos
are trademarks of Rovi Corporation or its
subsidiaries and are used under license.
This apparatus includes this label:
Note
•• The type plate is located on the back of the device.
EN
25
Specifications are subject to change without notice
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
MCD1165_UM_77_EN_V1.0
Download PDF
Similar pages