ConRep Ethernet Network Interface
>CR-DCXX05S1T1-0
Overview

The CR-DCXX05S1T1-0 is a manageable Ethernet network interface to fit the emerging deployment needs
of optical networks.

The CR-DCXX05S1T1-0 connects electrical Ethernet-based networks to optical networks easily and cost
effectively and can be used as a demarcation device.

Management via SNMP or Web interface.
Applications

Media conversion (10/100/1000Base-T to 1000Base-X or 10/100Base-T to 100Base-FX).

Can be combined with wavelength division multiplexing.

Demarcation.
Maintenance levels

Supports IEEE 802.3 ah OAM network management.
Features

Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-T, IEEE 802.3ab 1000Base-T and IEEE
802.3z 1000Base-X (CR-DC1005S1T1-0).

One 10/100/1000Base-T port (CR-DC1005S1T1-0) resp. 10/100Base-T port (CR-DC0105S1T1-0).

1000Base-X SFP port (CR-DC1005S1T1-0) resp. 100Base-FX SFP port (CR-DC0105S1T1-0).

Store and forward switching mechanism.

Auto crossover for MDI/MDIX in TP port.

Auto negotiation in TP port.

Supports Power/WAN/Status/Speed/Link Act LED

Supports 128kb packet buffer

Supports 4k MAC addresses

Supports jumbo frames on all ports up to 9728bytes size.

Complies with IEEE 802.1p Priority.

V 1.0
1/4
All information contained herein is believed to be accurate and is subject to change without notice. No responsibility is assumed for its use Cube Optics AG,
its subsidiaries and affiliates, or manufacturer, reserve the right to make changes without notice, to product design, product components and product
manufacturing methods. Some specific combinations of options may not be available. Please contact Cube Optics AG for more information.
ConRep Ethernet Network Interface
>CR-DCXX05S1T1-0

Supports QoS Classification based on TOS.

Supports Q-in-Q VLAN tunneling.

Supports bandwidth control.

Compatible with CR-DCCH16 chassis remote module management (by CR-DL-1000-PR).

Remote port management function:
o
State monitor – model/media/link/speed/duplex/activity/power
o
Port configuration – auto/speed/duplex/flow control

Supports SNMP/web managed interface.

Supports power down trap management.

Supports in-band loop back and diagnostic.

Build-in cable tray.
2/4
ConRep Ethernet Network Interface
>CR-DCXX05S1T1-0
Technical Specifications
Optical Interface
Electrical Interface
Interface Type
SFP
Data Rate
1250Mbps
Connector
RJ45
Data rate
10Mbps, 100Mbps, 1000Mbps (only CR-DC1005S1T1-0)
Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab (only CRDC1005S1T1-0),
IEEE 802.3z (only CR-DC1005S1T1-0), IEEE 802.1p, IEEE
802.1q, IEEE 802.3ah
LEDs
Product Spec
Power, WAN, status, link, speed
Jumbo Frame Size
9728k
MAC address table
4k (CR-DC1005S1T1-0)
2k (CR-DC0105S1T1-0)
Memory buffer
128k (CR-DC1005S1T1-0)
48k (CR-DC0105S1T1-0)
Power
External power supply
Input AC 120…240V
Output DC 12V
Power Consumption: 6W
Temperature
0° – 50°C (Operating)
-20° – 60°C (Storage)
Environment
Humidity
5% – 90% non condensing
Power Consumption
6W
Dimensions(WxDxH)
210x147x55mm
Shipping Weight
1.5kg
Certification
CE, FCC Class A
Ordering Information
Order Code:
CR-DC1005S1T1-0 10/100/1000Base-T to 1000Base-X Ethernet network interface
CR-DC0105S1T1-0 10/100Base-T to 100Base-FX Ethernet network interface
3/4
ConRep Ethernet Network Interface
>CR-DCXX05S1T1-0
Corporate Office:
Cube Optics AG
Robert-Koch-Strasse 30
55129 Mainz
Germany
phone: +49-6131-69851-0
fax: +49-6131-69851-79
e.mail: sales@cubeoptics.com
4/4
www.cubeoptics.com
Download PDF
Similar pages