ultrasonic flowmeter - Digital Marketing System Pvt. Ltd.

PORTABLE TYPE
ULTRASONIC FLOWMETER
FSC-2, FSS, FSD
DATA SHEET
PORTABLE TYPE ULTRASONIC FLOWMETER is a portable
type ultrasonic flowmeter utilizing the transit time measuring
method, using a clamp-on type detector.
It is a compact and lightweight instrument incorporating the
latest electronics and digital signal processing technologies,
realizing high performance and easy operation.
FEATURES
1. Compact and lightweight
The adoption of the latest electronics and digital
signal processing technologies has reduced the size
and weight of the flow transmitter by 30% and 30%,
respectively, in comparison with the Fuji conventional
portable flowmeter (Model FSC). (in comparison to
our existing model)
2. Battery operation
The flowmeter is designed for 12 hours of continuous operation via built-in battery which is rechargeable in 3 hours with the exclusive power adapter.
3. Full variety of detectors
The flowmeter is suitable for various types of detectors applicable for small to large diameter pipe (pipe
inner diameter ø13 to ø6000mm) and low to high
temperature (−40 to +200°C).
4. High accuracy and high-speed response
The flowmeter is designed for high accuracy
(±1.0%).
Response time is within 1 second.
5. Improved anti-bubble characteristic
Anti-bubble characteristic is greatly improved by
digital signal processing.
6. Excellent performance and easy operation
Large graphic LCD that is outside but easy to read.
Minimum number of function keys are used for page
selection, allowing easy setting.
While battery is working, the flowmeter is water
resistant and tolerates exposure to rain.
7. Large capacity storage by SD memory card
Measured data is periodically stored in SD memory
card. For example, in the case of 512MB (option), it
can be saved about 2 year measurement date(In case
of saving period 30 seconds, 14 kinds of saved data).
Available up to 8MB.
8. Serial communication
Use of a USB port allows easy connection to a personal computer. Measured date collection panel and
Loader software for PC (standard) which is available
for display and change of parameter (site setting) are
prepared.
9. Heat quantity (calorie) measurement
Heat quantity (calorie) may be measured by temperature input, making energy management easy for
cooling and heating.
Flow transmitter (FSC)
Detector (FSSC)
Detector for high-temperature(FSSH)
10.Graphic printer connection (option)
Easy recording with the Integral type printer.
11.Flow velocity profile measurement (option)
Flow profile may be observed in real time.
SPECIFICATIONS
Measuring objects
Measurement fluid:
Uniform liquid in which ultrasonic
waves can propagate.
Turbidity of fluid:10000 mg/L or less
State of fluid: Well-developed turbulent or laminar
flow in a filled pipe.
Fluid temperature: −40 to +200°C
Measuring range: 0···±0.3 to ±32m/s
Piping conditions
Applicable piping material:
Select from carbon steel, stainless
steel, cast iron, PVC, FRP, copper,
aluminum, acrylic or material of known
sound velocity.
Pipe size:
Flow rate measurement
ø13 to ø6000mm
Flow velocity profile measurement
ø40 to ø1000mm
EDS6-147f
Date
Oct. 6, 2017
FSC-2, FSS, FSD
Lining material: Select from no lining, tar epoxy,
mortar, rubber, Teflon, pyrex glass or
material of known sound velocity.
Note) No gap allowed between the
lining and the pipe.
Straight pipe length:
10D or more upstream and 5D or more
downstream (D: internal pipe diameter)
Refer to Japan Electric Measuring Instruments Manufactures’ Association’s
standard JEMIS-032 for details.
Performance specifications
Accuracy rating:
Pipe inner
diameter
ø13 to ø50mm
ø50 to ø300mm
ø300 to ø6000mm
Flow velocity
range
2 to 32m/s
0 to 2m/s
2 to 32m/s
0 to 2m/s
1 to 32m/s
0 to 1m/s
Accuracy
±1.5% of rate
±0.03m/s
±1.0% to 1.5% of rate
±0.02 to 0.03m/s
±1.0% to 1.5% of rate
±0.01 to 0.02m/s
Note1) Reference conditions are based on JEMIS-032.
Note2) Refer to the 4 pages for the accuracy according to kind
of detector.
Flow transmitter (Type: FSC)
Power supply: Built-in battery or AC power adapter
Built-in battery:Exclusive lithium button battery
(5000m Ah)
Continuous operation time, approx. 12
hours (without printer, back light OFF,
output current not used and at normal
ambient temperature (20°C))
Recharging time, approx. 3 hours
(power adapter used)
Recharging temperature range: 0 to
+40°C
Power consumption: Min. 3W and
Max. 16W
The consumption varies depending on
the use conditions.
Power adapter:Exclusive power adapter 100V to 240V
+10%/−15% AC (50/60Hz), 70VA or
less.
LCD:
Semi-transmissive color graphic display
240 × 320 (with back light)
Measurement value (instantaneous
flow rate, integrated flow rate) and
various settings are displayed.
Excellent visibility even outdoors in
direct sunlight.
LED display:
Status display when using AC power
adapter.
DC IN (green): Power supply status
CHARGE (red): Battery charging underway
Operation keypad:
11 buttons
(ON, OFF, ENT, ESC, MENU, , , ,
, LIGHT, PRINT)
Power failure backup:
Measurement value is backed up by
nonvolatile memory.
Clock backup with lithium battery (effective term, 10 years or more)
Response time: 1 second
2
Analog output signals:
4 to 20mA DC, one point (load resistance, 600Ω or less)
Instantaneous velocity, instantaneous
flow rate or heat quantity (calorie) after
scaling.
Analog input signal:
4 to 20mA DC, one point
(input resistance, 200Ω or
less)
Total
4 to 20mA DC, one point (in- 2 points
put resistance, 200Ω or less)
or 1 to 5V DC, one point
Used to input temperature for heat
quantity measurement, etc.
SD memory card:Used for data logger function and
recording screen data.
Available up to 8GB (Option256MB)
Compliant media
• SD memory card: speed class 2, 4, 6
• SDHC memory card: speed class 4, 6
Format
• FAT16: 64MB to 2GB
• FAT32: 4GB, 8GB
Otherwise, reading and saving are
impossible.
File format
• Date logger: CSV file
• Screen date: Bit map file
Serial communication:
USB port (device* compatible):
Mini B receptacle
Connectable number of Mini B receptacles:
1 unit
Transmission distance: 3m max.
Transmission speed: 500kbps
Data:
Instantaneous velocity, instantaneous flow rate, total value, heat
quantity (calorie) value, error information, logger data, etc.
* Device: Connected plug from PC
Printer (option): To be mounted on top of transmitter
unit
Thermal line dot printing
Note) When the Chinese display is selected,
printing is made in kanji characters.
Ambient temperature:
−10 to +55°C (Without printer)
−10 to +45°C (With printer)
Ambient humidity: 90%RH or less
Type of enclosure: IP64 (Without printer)
Enclosure case: Plastic case
Outer dimensions: H210 × W120 × D65mm (Without printer)
H320 × W120 × D65mm (With printer)
1.0kg (Without printer)
Weight:
1.2kg (With printer)
Functions
Display language: Selectable from Japanese, English,
German, French, Spanish or Chinese
(switchable by key operation).
Clock display function:
Time (year, month, day, hour, minute)
display (configurable)
Monthly error: about 1 minutes at normal temperature (20°C).
Instantaneous value display function:
Instantaneous velocity, instantaneous
flow rate display (The flow in reverse
direction is displayed with minus “−.”)
Numeric value: 10 digits (decimal point
equals 1 digit)
Unit: Metric/English system selectable
Metric system
Velocity: m/s
Flow rate:L/s, L/min, L/h, L/d, kL/d,
ML/d, m3/s, m3/min, m3/h,
m3/d, km3/d, Mm3/d, BBL/s,
BBL/min, BBL/h, BBL/d,
kBBL/d, MBBL/d
English system
Velocity: ft/s
Flow rate:gal/s, gal/min, gal/h, gal/d,
kgal/d, Mgal/d, ft3/s, ft3/min,
ft3/h, ft3/d, kft3/d, Mft3/d,
BBL/s, BBL/min, BBL/h,
BBL/d, kBBL/d, MBBL/d
Total value display function:
Display of forward or reverse total
(reverse is displayed as minus)
Numeric value: 10 digits (decimal point
is corresponding to 1 digit)
Unit: Metric/English system selectable
Metric system
Flow rate total: mL, L, m3, km3, Mm3,
mBBL, BBL, kBBL
English system
Flow rate total: gal, kgal, ft3, kft3, Mft3,
mBBL, BBL, kBBL, ACRE-ft
Consumed heat quantity (calorie) display function:
Display of consumed heating medium
Metric system
Heat flow: MJ/h, GJ/h
Total heat quantity: MJ, GJ
English system
Heat flow:MJ/h, GJ/h, BTU/h, kBTU/h,
MBTU/h, kW, MW
Total heat quantity:
MJ, GJ, BTU, kBTU, MBTU,
kWh, MWh
J
: Joule
BTU
: British thermal unit
W
: Watt
Computation function of consumed heat quantity (calorie):
This function calculates the heat
quantity received and sent with liquid
(water) in cooling and heating.
Converter
Temperature
sensor
Consumed heat quantity
q = K · Q · (T1–T2)
K : heat quantity (calorie)
conversion factor
(For heating K = 4.123,
For cooling = 4.186)
Heat
exchanger
Heat
source
Converter
T2: Fluid temperature (outlet)
Detector (Type: FSS)
Type of detector:
Classification
Type Internal pipe
diameter (mm)
Middle diameter FSSC ø50 to ø1200 (*1)
Small diameter
FSSD ø13 to ø300
Large diameter
FSSE ø200 to ø6000
High temperature FSSH ø50 to ø400
Fluid
Frequency
temperature (MHz)
-40 to 120°C
1
-40 to 100°C
2
-40 to 80°C
0.5
-40 to 200°C
2
*1) For pipes with a diameter of 300 mm or larger, we recommend to use FSSE
and mount it by Z method.
T1: Fluid temperature
(inlet)
Temperature
sensor
Temperature display function:
Fluid temperature be displayed by current input from temperature transmitter.
Metric system
Temperature unit: °C or K
English system
Temperature unit: F or K
Site data storage function:
Max. 32 locations (sites) data (pipe
size, material, fluid type and etc) can
be stored into built-in non-volantile
memory.
Damping:
0 to 100sec (every 0.1sec) configurable
for analog output and velocity/flow
rate display
Low flow cut: Equivalent to 0 to 5m/s
Output setting function:
Current output scaling, output type,
burnout setting and calibration
Serial communication function:
Instantaneous velocity, instantaneous
flow rate, total value, heat flow, error information, received waveform,
analog input, velocity profile data,
logger data, etc. may be downloaded
to personal computer.
Logger function:Instantaneous velocity, instantaneous
flow rate, total value, heat flow, error
information, received waveform, analog input, velocity profile date can be
saved in a SD memory card.
Waveform display function:
Bi-directional received waveforms may
be displayed.
Graph display function:
Flow rate trend graph may be displayed.
Printing function (option):
Hard copy output of a screen
Periodic printing (type: text, graph)
Logger date (type: text, graph)
Flow velocity profile measurement (option):
Flow velocity profile may be observed
in real time using the exclusive detector (option).
(Refer to page 5 for details.)
Detector
(type : FSS)
Q: Flow rate of the fluid
Mounting method:Mounting on outside of pipe
Sensor mounting method:
V or Z method
Signal cable:Exclusive coaxial cable, 5m (Included with
FSC)
Connection method:
Transmitter side: Exclusive connector
Detector side (FSSE): Screw terminal
Others: BNC connector
3
FSC-2, FSS, FSD
MEASURING PRINCIPLE
Ambient temperature:
–20 to +60°C
Ambient humidity:
FSSE
100%RH or less
Other
90%RH or less
Type of enclosure:
FSSC
IP65
(When waterproof BNC connector is provided)
FSSE
IP67
Others
IP52
Water-proof treatment type
IP68
(Submerged resistant structure for 5 days)
Material of detector:
Classification
Type
Sensor
case
Rail material
Plastic
Plastic
Plastic
SUS304
Aluminum alloy + Plastic
Small diameter
FSSD
Middle diameter
FSSC
Large diameter
FSSE
High temperature FSSH
With ultrasonic pulses propagated diagonally between the
upstream and downstream sensors, flow rate is measured by
detecting the time difference obtained by the flow of fluid.
Detector
Upstream sensor
θ
Flow
velocity V
t1
Output
Flow signal
transmitter
D
t2
Downstream sensor
MOUNTING OF DETECTOR
Plastic wedge
Pipe
PZT oscillator
Aluminum alloy + Plastic
Lining
———
Aluminum alloy
Material of mounting belt/wire:
Detector type Dimensions
6th digit
A
1.5mX2
Material
C
D
E
(1) When V method is used for mounting
Plastic cloth belt
Cable
SUS304
SUS304
Detector
SUS304
Flow
transmitter
3.0mX1
1.0mX4
Inner pipe diam.<ø1500mm
Inner pipe diam.<ø6000mm
B
CONFIGURATION DIAGRAM
SUS304
Extension cable(option):
Extended when the length of the detector signal cable is not sufficient.
Length: 10m, 50m
4 to 20mA
DC
(2) When Z method is used for mounting
Cable
Flow
transmitter
Detector
4 to 20mA
DC
DETECTOR SELECTION GUIDE (ACCURACY % of rate)
TYPE
FSSD
FSSC
FSSE
FSSH
Mounting
method
V*2)
Z
Inner diameter of piping ø[mm]
13 25
50
100
150
±1.5
to 2.5
250
300
400
600
1200
3000
6000
±1.0
±1.0
*1)
V
200
±1.5
±1.0
Z
±1.0
V
±1.5
±1.0
Z
±1.5
±1.0
V
±1.0
Z*1)
±1.0
*1) When FSSD or FSSH is mounted using the Z method, guide rail (option) is required additionally.
*2) For the pipe inner diameter of ø13mm, the sensor mounting dimension may be 0.0mm or less depending on pipe material and thickness.
When the sensor mounting dimension is 0.0mm or less,measurement error is about 2 to 5%.
<Description of the table>
It shows pipe thickness of each material that the sensor mounting
size is to be 0.0mm, when fixing a pipe. If the fluid is the one other
than water, and if the sound velocity of fluid is faster than the one
of water, the sensor mounting size is to be 0.0mm or more.
4
Required min. pipe thickness (fluid: water) (Unit: mm)
Steel pipe
2.15 or more
FRP
Stainless pipe
1.87 or more
Ductile cast iron
PVC pipe
3.69 or more
PEEK
Copper pipe
3.82 or more
PVDF
Cast-iron pipe
2.98 or more
Acrylic pipe
Aluminum pipe 1.99 or more
Polypropylene
3.21 or more
2.15 or more
3.69 or more
3.69 or more
2.90 or more
3.69 or more
FLOW VELOCITY PROFILE DISPLAY FUNCTION
(OPTION)
Pulse Doppler method enables the analysis and display of
the flow velocity profile in real time. The results can be used
to decide the appropriate measurement location, for flow
diagnosis, and laboratory test.
MEASUREMENT PRINCIPLE
<Pulse Doppler method>
Ultrasonic pulses are transmitted through the fluid flow.
Entrained bubbles and microscopic particles within the
fluid create frequency phase shifts (Doppler effect.) The
resulting doppler shifts are integrated across the inside
pipe diameter cross section. The resulting profile curve is a
real-time dynamic display of the flow profile within the pipe.
SPECIFICATIONS
Measuring fluid: Uniform liquid in which ultrasonic
waves can propagate.
Turbidity of fluid: Axisymmetric flow in a filled pipe.
Fluid temperature:
−40 to +100°C (FSDP2)
−40 to +80°C (FSDP1,FSDP0)
Air bubble quantity:
0.02 to 15vol% (Velocity is 1m/s)
Pipe size:
Small type sensor : ø40 to ø200mm
Middle type sensor :ø100 to ø400mm
Large type sensor :ø200 to ø1000mm
Measurement range:
0 to ±0.3 … ±Maximum Velocity (depending on the pipe diameter)
Refer to tables 1 and 2.
Note) This function is to observe flow
velocity profile, and it may be different
from actual flow rate.
DETECTOR FOR FLOW VELOCITY PROFILE
MEASUREMENT (TYPE: FSDP)
Mounting method:
on outside of existing pipe
Ambient temperature: −20 to +80°C
Ambient humidity: 100% RH or less
IP67 (waterproof BNC connector
Enclosure:
required.)
Material:
Sensor housing: PBT
Guide frame:
Aluminum alloy
Mounting belt: Plastic cloth or stainless
Sensor 1 (FSD)
Flow
Air
bubbles
Reflection
Sensor 2
(FSD)
Flow velocity
Flow
velocity
Profile 2
Piping wall
Flow
velocity
Profile 1
Center
Piping wall
The above shows an example when using two sensors.
One detector displays the flow velocity profile for a radius.
BLOCK DIAGRAM
(1) Using one sensor
Cable
Power
supply
Sensor (FSD)
Flow
Transmitter
(2) Using two sensors
Cable
Sensor (FSD)
Power
supply
Flow
Transmitter
Sensor (FSD)
5
FSC-2, FSS, FSD
Measurement range of pulse Doppler method varies with
the pipe outer diameter, wall thickness, material, and kind
of fluid. When the pipe material is stainless steel, the pipe
schedule is 20s, and fluid is water, the ranges for each
detector are as follows.
Table1
Maximum measurable flow velocity
Unit: m/s
Diameter FSDP2 FSDP1 FSDP0
40A
6.56
50A
6.52
65A
5.31
80A
4.65
90A
4.12
100A
3.69
7.25
125A
6.08
3.08
150A
5.20
2.63
200A
4.05
7.77
2.04
250A
6.38
3.30
300A
5.41
2.78
350A
4.90
2.51
400A
4.31
2.20
450A
3.80
500A
3.48
550A
3.17
600A
2.91
650A
2.71
700A
2.52
750A
2.35
800A
2.21
850A
2.08
900A
1.97
1000A
1.77
Table2
Maximum measurable flow rate
Unit: m3/h
FSDP2 FSDP1 FSDP0
33.6
52.7
72.1
86.5
102
118
231
289
147
354
179
474
908
239
1168
604
1428
735
1598
820
1858
951
2118
2358
2618
2879
3096
3357
3618
3879
4140
4400
4902
PC Loader Software
The software allows you to view and edit parameter setpoints
on your PC, and to load the following data: instantaneous
flow rate, instantaneous velocity, error information, received
waveform, analog input, and log data.
PC requirements: PC/AT compatible machine
Free hard disc capacity: 64 MB or more
Memory capacity: 32 MB or more
Operating system: ‌Windows2000/XP/Vista* or Windows
7 (Home Premium, Professional)
*‌If your OS is Windows Vista, do not use Windows Aero
because it is not supported by this software.
EU Directive Compliance
LVD (2014/35/EU)
EN 61010-1
EMC (2014/30/EU)
EN 61326-1 (Table 2)
EN 55011 (Group 1 Class A)
EN 61000-3-2 (Class A)
EN 61000-3-3
EN 61326-2-3
RoHS (2011/65/EU)
EN 50581
CODE SYMBOL
<Flow transmitter>
1 2 3 4 5 6 7 8
F SCS
<Detector>
(for transit time)
9 10 11
2 -
Description
0
S
1
2
0
1
A
B
C
2
0
1
Y
J
E
C
<Specification>
Standard
<Converter>
Basic system
Basic system + Printer
<Flow velocity profile measurement>
None
Provided (detector to measure flow
velocity profile is separately required.)
<Power adapter>
AC power + power cord (125V AC) for
Japanese and North American use
AC power + power cord (250V AC) for
European and Korean use
AC power + power cord (250V AC) for
Chinese use
Modification No.
<SD memory card>
None
Provided (512MB)
<Bound instruction manual/Language>
None (Factory-set language: English)
Provided/Japanese
(Factory-set language: Japanese)
Provided/English
(Factory-set language: English)
Provided/Chinese
(Factory-set language: Chinese)
(Note1) Instruction manual contained in CD
is the standard attached article.
(Note2) You can change the language by
key operation.
1 2 3 4 5 6 7 8
F SSC1
9 10
Description
1
<Senser type>(4th digits)
ø50 to ø1200mm
C
<Guide rail>(5th digits)
Provided (Extendable rail type)
1
<Mounting belt>(6th digits) *2
None
Stainless belt (1.0m×2)
Plastic cloth belt (3m×1)
SS belt fasten with screws (1.0m×4)
Wire ≤ ø1500mm
Y
A
B
C
D
Y
B
C
Y
B
Y
A
*1: Normally select silicone grease as acoustic coupler. Silicone grease is
tube (100g).
Select silicone-free grease for semiconductor manufacturing
equipment or the like that is vulnerable to silicone. The silicone-free
grease is water-soluble and, therefore, cannot be used in environment
exposed to water or on piping subjected to a condensation. Since the
grease does not set, a periodic maintenance (cleaning, refilling every
about 6 months at normal temperature) is necessary.
*2: Please refer to the table 1 to serect the mounting belt at 6th digits.
[Table 1] How to select at 6th digits.
Mounting method
V method
Z method
6
<Acoustic coupler> (7th digit) *1
None
Silicone-free grease (HIGH-Z)
Silicone grease (G40M)
<Water-proof treatment>(9th digit)
None
Provided (with signal cable 10m)
*Submersible in water for 5 days
<Tag plate> (10th digit)
None
Provided
≤ø300mm
B, A or C
C
≤ø600mm
C
D
≤ø1200mm
D
D
CODE SYMBOL
OPTIONAL ITEMS
Name
Specifications
Arrangement No.
1
Battery
Special type Li-ion battery
(7.4V, 2500mAh)
ZZP*TK7N6384P1
*Order in two pairs.
2
AC power
adapter
Special type power adapter and
100 to 240V +10%/−15% AC,
50/60Hz
ZZP*TK7N6380C4
3
Power code
Japan, North America:125V AC 2m
Europe, Korea: 250V AC 2m
China: 250V AC 2m
ZZP*TK7N6621P1
ZZP*TK7N6608P1
ZZP*TK7N6609P1
4
Printer
To be mounted on top of converter
Thermal serial dot system (8 x 384
dot)
ZZP*TK4J2634C1
5
Printer roll
paper
Maker: SEIKO I SUPPLY Co. Ltd.
Type: TP-211C-1
Specifications: Thermal roll paper
Width: 58mm×ø48mm
ZZP*TK7N6381P1
6
Silicone
grease
Maker: Shin-Etsu Chemical Co., Ltd.
Type:
· For standard use
G40M, 100g ZZP*45231N5
100g ZZP*TK7M0981P1
· For silicone free
· For high temperature KS62M, 100g ZZP*TK7P1921C1
7
Signal cable
Special type signal cable, 5m × 2
(connector on both - sides)
8
Extension
signal cable
Special type coaxial cable with BNC
connector
ZZP*TK468664C3
· 10m × 2
ZZP*TK468664C4
· 50m × 2
9
Analog
6-core cable, 1.5m, with connector
input/output
cable
<Detector>
(for flow velocity profile measurement)
1 2 3 4 5 6 7 8
F SD
Description
0 Y 1
<Kind>
Small type (φ40 to φ200mm)
Middle type (φ100 to φ400mm)
Large type (φ200 to φ1000mm)
P2
P1
P0
<Terminal mold>
None
0
<Structure>
General use
Y
Modification No.
1
SCOPE OF DELIVERY
<Flow transmitter : FSC>
Name of unit
1 Basic system
2
Option
Scope of delivery
1) Conversion unit
2) Power adapter and
Power connector conversion cord
3) Power cord
4) Analog input/output cord (1.5m)
5) USB cable (1m)
6) Carrying case
7) Strap
8) Special type signal cable (5m × 2)
9) C D-ROM (Instruction manual and
Loader software for PC)
1) Printer unit + rolled paper (1 roll)
2) SD memory card (512MB)
3) Bound instruction manual (including
a detector)
<Detector : FSS, FSD>
Name of unit
Scope of delivery
1 Detector for propa- 1) Sensor unit
gation time differ- 2) Signal cable conversion code
(included with FSSE)
ence (FSS)
3) Mounting belt/wire
4) Silicone grease (Article specified)
2 Detector for flow 1) Detector unit
v e l o c i t y p r o f i l e 2) Mounting belt/wire
(FSDP)
3) Silicone grease (100g)
Note 1) Silicon grease is for filling a gap between a detector and a
pipe joint area. It is provided with a detector.
Since silicon grease does not become hardened, if you use
it in the long term, periodic maintenance is required. (Under
the condition of room temperature, semiannual cleaning and
refill is recommended.)
Note 2) When you order a detector alone, an instruction manual is
not provided. Please request, if necessary (Onerous).
10 Mounting
belt /wire
ZZP*TK7N7795C1
ZZP*TK4J2639C1
· Plastic cloth belt
· Stainless wire
Nominal diameter
ø200 to ø500mm
ø200 to ø1000mm
ø200 to ø2000mm
ø200 to ø3000mm
ø200 to ø6000mm
· Stainless steel belt
ZZP*TK7G7979C1
11 Guide rail
for hightemperature
sensor
(In mounting
by the Z
method)
· Mounting bracket material:
Aluminum alloy+SUS304
For FSSH
ZZP*TK4J5917C3
12 Guide rail for
small type
detector
(In mounting
by the Z
method)
· Mounting bracket material:
Aluminum alloy+plastic
For FSSD3 (L=540mm)
ZZP*TK4J5917C1
ZZP*TK7G7980C1
ZZP*TK7G7980C2
ZZP*TK7G7980C3
ZZP*TK7G7980C4
ZZP*TK7G7980C5
ZZP*TK7P1943C1
13 SD memory Maker: Panasonic, Inc.
card
Type: RP-SDFC51CD1
Capacity: 512MB
ZZP*TK7N7680P1
14 USB cable
Maker: Sunwa Supply Inc.
Type: KU-AMB510
Specifications: Mini USB cable
(1.0m)
ZZP*TK7N6622P1
15 Signal cable
conversion
cord
M4 clamp terminal / BNC jack,
L=150mm
ZZP*TK4K6304P1
7
FSC-2, FSS, FSD
Diagram
To connect signal cables for FSSC, FSSD, FSSH, FSDP2, FSDP1, FSDP0
BNC
connector
Printer
(option)
Detector
Signal cable
BNC connector
Detector input
(the downstream side)
Flow
transmitter
To connect signal cables for FSSE
Detector input
(the upstream side)
ON
OFF
Analog input/output cable
ESC
FEED
AO analog output 4 to 20mA DC
AICH1 analog input 4 to 20mA DC or 1 to 5 V DC
AICH2 analog input 4 to 20mA DC
ENT
Print
MENU
CHARGE DC IN
PC
SD
SD memory
card
Power connector
Conversion cord
100 to 240V AC
Power cord
AC power adaptor
USB cable
for use AC adaptor
To connect PC
Pipe requirements
(D: Nominal diameter of pipe)
Type
Length of upstream straight pipe
Length of downstream straight pipe
10D or more
L ≥ 5D
90° bend
L ≥ 10D
10D or more
Detector
T-shape
L ≥ 10D
L ≥ 50D
0.5D
or more
10D or more
L ≥ 30D
L ≥ 5D
D
Diffuser
1.5D or more
L ≥ 10D
L ≥ 50D
Tapered
L ≥ 30D
L ≥ 10D
Valve
Flow controlled upstream
Flow controlled downstream
Isolation valve
Check valve
L ≥ 50D
Pump
P
Note) Source: Japan Electric Measuring Instruments Manufacturers' Association (JEMIS-032)
8
Conversion
cord
Detector
OUTLINE DIAGRAM (Unit:mm)
Flow transmitter
120±1.8
65±1.8
2-M4, Depth5 (both sides)
210±2.5
SENSOR
UPSTREAM
DOWNSTREAM
Sensor (downstream)
ON
OFF
ESC
FEED
DC12V
AI/AO
Sensor (upstream)
Analog input/output
ENT
Print
MENU
DC power input
CHARGE DC IN
Power switch
SD memory card slot
USB port
Weight : Approx. 1.0kg
9
FSC-2, FSS, FSD
OUTLINE DIAGRAM (Unit:mm)
Flow transmitter (with printer)
120±1.8
65±1.8
Printer
Approx. 320±4.5
2-M4, Depth5 (both sides)
SENSOR
UPSTREAM
DOWNSTREAM
Sensor (downstream)
ON
FEED
OFF
DC12V
AI/AO
Sensor (upstream)
ESC
Analog input/output
ENT
DC power input
Print
MENU
CHARGE DC IN
Power switch
SD memory card slot
USB port
Weight : Approx. 1.2kg
10
OUTLINE DIAGRAM (Unit:mm)
480±2
SPACING: 0 to 300
20
1
2
20
40
3
40
1
60
60
2
80
4
80
3
100
100
120
5
120
4
140
inch
6
140
5
160
160
mm
mm
6
inch
BNC connector
Scale (mm)
Scale (inch)
53
BNC CONN.
54
88max.
Lock nut
Tag plate
Rail end
Name plate
Extended rail
Sensor unit
Guide rail
<Shipment style (V method)>
L
Type.
Mfd.
(880)
700max.
400max.
40
20
1
20
1
60
2
40
2
80
3
60
3
100
4
5
100
100
80
4
5
6
inch
Absorber unit
100
Ser.No.
inch
6
100
100
120
120
140
140
160
160
mm
mm
240
Extended rail
Made in Japan
<Extended style (Longest, V method)>
Frame
240
240
Rail end (Accessories)
(H)
<Sepalate style (Z method)>
Detecter : Type FSSC
W±1
Straight plug
Type
Diameter (mm)
L
H
W
Weight
Approx. (kg)
FSDP2
φ40 to φ200
260±1.2
70
57
0.8
FSDP1
φ100 to φ400
260±1.2
72
57
0.9
FSDP0
φ200 to φ1000 350±2.0
90
85
2.0
+100
(ø2.4)
BNC Connector
5000 -0
Detector FSDP (Detector for flow velocity profile measurement)
Signal cable
Clip
(ø12.3)
Straight plug
(ø5)
AO
AI ch1
AI ch2
+100
1500 -0
100±5
Weight : approx. 0.1kg
Code color
Black (BK)
White (W)
Red (R)
Green (G)
Yellow (Y)
Brown (BN)
Clip color
Red (R)
Black (BK)
Red (R)
Black (BK)
Red (R)
Black (BK)
(+)
(−)
(+)
(−)
(+)
(−)
Mark
AO
AI ch1
AI ch2
Analog input/output cable
11
FSC-2, FSS, FSD
Detector for special application
1) detector for small diameter type
Pipe size: ø13 to 100mm (300mm max.)
Fluid temperature: –40 to 100°C
Type: FSSD□□□ 1-Y□
Specification
• Sensor frequency: 2MHz
• Mounting method: V method, Z method (FSSD3)
• Fluid temperature: –40 to 100°C
• ‌A pplicable pipe material: PVC, SS, carbon steel pipe,
copper pipe, aluminum pipe, etc.
[In case lining is removed from the pipe, Measurement
can not be conducted]
• Rated accuracy of combination with the flow transmitter
(Applicable piping: plastic, metal pipe)
Internal diameter Velocity
(mm)
ø13 to ø50
2 to 32m/s
0 to 2m/s
ø50 to ø100
2 to 32m/s
(ø300)
0 to 2m/s
•
•
•
•
•
CODE SYMBOL
<Detector>
1 2 3 4 5 6 7 8
9 10
F S SD
Y
1
Description
<Senser type>(4th digits)
ø13 to ø100mm
D
<Guide rail>(5th digits)
Provided (L=320mm)≦ø100mm
Iong rail (L=540mm)≦ø300mm
1
3
Accuracy
Y
A
B
C
±1.5% to ±2.5% of rate
±0.03 to ±0.05m/s
±1.0% of rate
±0.02m/s
Y
A
B
C
Mounting belt: according to specified code of symbol.
Material: PBT, guide rail: aluminum alloy + plastic
Type of enclosure: IP52
Acoustic coupler: according to specified code of symbol.
Mass: 0.6kg, 0.8kg
Y
Y
A
<Mounting belt>(6th digits)
None
Stainless belt (1.5m×2)
Plastic cloth belt (3m×1)
SS belt fasten with screws (1.0m×4)
<Acoustic coupler> (7th digit)
None
Silicon rubber (KE348)
Silicone-free grease (HIGH-Z)
Silicone grease (G40M)
<Water-proof treatment>(9th digit)
None
<Tag plate> (10th digit)
None
Provided
OPTIONAL ACCESSORIES
Name
Sillicon grease (GM40M)
Sillicon-free grease (HIGH-Z)
Drawing No.
ZZP*45231N5
ZZP*TK7M0981P1
Scope of delivery
• Detector, acoustic coupler and set of the mounting belt
according to specified code of symbol
OUTLINE DIAGRAM (unit: mm)
<Detector>
Saddle
Saddle
Scale(inch)
Scale(mm)
Connector
Element holder
Lock nut
inch
Cursor
540±2
Lock nut
Name prate
Spacing: 0 to 348
Distance between two
sensors 0 to 133
Scale
(mm)
320±2
mm
Connector
Scale
(inch)
Element holder
Cursor
36±0.5
90max.
90 max.
36
52.5±0.5
52.5±0.5
Weight : Approx. 0.6kg
Small diameter sensor: FSSD1
12
Weight : Approx. 0.8kg
Detector FSSD3
Detector for special application
2) detector for high temperature
Pipe size: ø50 to 400mm
Fluid temperature: –40 to 200°C
Type: FSSH1□□1-Y□
Specification
• Sensor frequency: 2MHz
• Mounting method: V method (ø50 to 250mm) or Z method
(ø150 to 400mm)
• Fluid temperature: –40 to 200°C
• A pplicable pipe material: PVC, SS, carbon steel pipe,
copper pipe, aluminum pipe,etc.
[In case lining is removed from the pipe, Measurement
can not be conducted]
• Rated accuracy of combination with the flow transmitter
(Applicable piping: plastic,metal pipe)
Internal diameter Velocity
(mm)
ø50 to ø300
2 to 32m/s
0 to 2m/s
ø300 to ø400
0.75 to 32m/s
0 to 0.75m/s
Accuracy
±1.0% of rate
±0.02m/s
±1.0% of rate
±0.0075m/s
CODE SYMBOL
<Detector>
1 2 3 4 5 6 7 8
9 10
F S SH1
Y
1
Description
<Senser type>(4th digits)
ø50 to ø400mm (-40 to 200°C)
H
<Guide rail>(5th digits)
Provided
1
Y
A
C
Y
D
Y
• Mounting belt: according to specified code of symbol.
• Material: sensor housing: SUS304
guide rail: SUS304 + aluminum alloy
• Type of enclosure: IP52
• Acoustic coupler: according to specified code of symbol.
• Mass: 1.6kg
OUTLINE DIAGRAM (unit: mm)
Y
A
<Mounting belt>(6th digits)
None
Stainless belt (1.5m×2)
SS belt fasten with screws (1.0m×4)
<Acoustic coupler> (7th digit)
None
High-temperature grease (KS62M)
<Water-proof treatment>(9th digit)
None
<Tag plate> (10th digit)
None
Provided
OPTIONAL ACCESSORIES
Name
Guide rail for high-temperature sensor
(Z method)
High-temperature grease(KS62M)
Drawing No.
ZZP*TK4J5917C3
ZZP*TK7G7983C1
<Detector>
Connector
Scale(inch)
Saddle
Scope of delivery
Scale(mm)
• Detector, acoustic coupler and set of the mounting belt
according to specified code of symbol
530±2
Distance between
two sensors 0 to 330
Name plate
Lock nut
Element holder
Cursor
ø26
33±0.5
90max.
205max.
44±1
High-temperature sensor: FSSH
13
FSC-2, FSS, FSD
Detector for special application
3) detector for large diameter type
Pipe size: ø200 to 6000mm
Fluid temperature: –40 to 80°C
Type: FSSE1□□1-□□
Specification
• Sensor frequency: 0.5MHz
• Mounting method: V or Z method
• Fluid temperature: –40 to 80°C
• A pplicable pipe material: PVC, SS, carbon steel pipe,
copper pipe, aluminum pipe,etc.
* In case lining is removed from the pipe, Measurement
can not be conducted
• Also applicable to water-proof type according to specified
code of symbol (submerged resistant structure for 5days
including 10m cable)
• Rated accuracy of combination with the flow transmitter
(Applicable piping: plastic, metal pipe)
Internal diameter Velocity
(mm)
ø200 to ø300
2 to 32m/s
0 to 2m/s
ø300 to ø1200
0.75 to 32m/s
0 to 0.75m/s
ø1000 to ø6000
1 to 32m/s
0 to 1m/s
CODE SYMBOL
<Detector>
1 2 3 4 5 6 7 8
F SSE1
9 10
Description
1
<Senser type>(4th digits)
ø200 to ø6000mm
E
<Guide rail>(5th digits)
Provided
1
Y
D
E
Y
A
B
C
Accuracy
±1.5% of rate
±0.03m/s
±1.5% of rate
±0.0113m/s
±1.0% of rate
±0.02m/s
Y
B
Y
A
• Mounting belt: according to specified code of symbol.
• Material: Sensor housing PBT, Sensor cover SUS304
• Type of enclosure: IP67
(silicon rubber is filled up on the terminal block when connecting work)
• Acoustic coupler: according to specified code of symbol.
• Mass: 1.2kg
OUTLINE DIAGRAM (unit: mm)
<Detector>
Name plate
<Mounting belt>(6th digits)
None
Wire ≤ ø1500mm
Wire ≤ ø6000mm
<Acoustic coupler> (7th digit)
None
Silicon rubber (KE348)
Silicone-free grease (HIGH-Z)
Silicone grease (G40M)
<Water-proof treatment>(9th digit)
None
Provided (with signal cable 10m)
<Tag plate> (10th digit)
None
Provided
OPTIONAL ACCESSORIES
Name
Wire rope for mounting the sensor
• Spring
• Wire rope (up to ø500mm)
• Wire rope (up to ø1000mm)
• Wire rope (up to ø1500mm)
• Wire rope (up to ø3000mm)
• Wire rope (up to ø6000mm)
Sillicon grease (GM40M)
Sillicon rubber (KE348W)
Sillicon-free grease (HIGH-Z)
Drawing No.
ZZP*TK745007P1
ZZP*TK464686C1
ZZP*TK464686C2
ZZP*TK464686C3
ZZP*TK464686C6
ZZP*TK464686C13
ZZP*45231N5
ZZP*45735N2
ZZP*TK7M0981P1
Scope of delivery
84±1
• Detector, acoustic coupler and set of the mounting belt
according to specified cord of symbol
• Signal cable conversion cord
114
<Signal cable conversion cord>
ø4.3
Wire rope
Mounting spring
150
ø19
67±1
Large sensor: FSSE
14
Cable
8
78±1
Sensor
BNC Connector
CHECKED ITEMS BEFORE PURCHASE
Following conditions may cause failure of the measurement
or to reduce the accuracy.
Please consult and ask Fuji Electric for checking with actual
equipment previously if it is hard to judge the applicability.
1)Fluid
• I f fluid contains a large amount of bubbles (approx.
12vol% or more at 1m/s flow rate)
• If fluid has bad turbidity 10000(mg/L) or more,
• If fluid contains slurry or solid materials (about 5wt%)
• If flow rate is low Reynolds No.10000 or less,
(reference: flow rate 5m 3/h with ø100mm)
• If it is circulating oil, liquid medicine of low concentration,
waste liquid and hot spring,
2)Pipe
• If inside pipe is rusty carbon steel pipe,
• If inside pipe having adhering substances and sediment
• If outer surface of cast-iron pipe is rough,
• If pipe wall is tick such as ruinous pipe, (PP material
15mm or more, PVDF material 9mm or more)
• If it is SGPW pipe,
• If lining pipe is removed from pipe, (Teflon, PVC, Glass,
etc)
• If it is rubber pipe,
3) Pipe straight run
For accurate measurement, a certain length of pipe straight
run is required both upstream and downstream of the
measurement point. Be sure to satisfy the requirements
described on Page 8.
CAUTION ON USE
1) Do not damage the sensor or signal mounted on the pipe.
2) Make sure to fill the fluid inside the pipe to measure .
3) When you use horizontal pipe, it is recommended to install
the sensor horizontally.
4) When you use the grease as acoustic coupler to install
the sensor for outdoor use, it is recommended to install
the waterproof cover to prevent from the degradation.
15
FSC-2, FSS, FSD
Caution on Safety
*Before using this product, be sure to read its instruction manual.
Global Sales Section
Instrumentation & Sensors Planning Dept.
1, Fuji-machi, Hino-city, Tokyo 191-8502, Japan
http://www.fujielectric.com
Phone: +81-42-514-8930 Fax: +81-42-583-8275
http://www.fujielectric.com/products/instruments/
Information in this catalog is subject to change without notice.
Printed in Japan
Download PDF
Similar pages