Mining Excavator
R 9350
Operating Weight with Backhoe Attachment:
302,000 kg / 665,800 lb
Operating Weight with Shovel Attachment:
310,000 kg / 683,400 lb
Engine Output:
1,120 kW / 1,500 hp
Bucket Capacity:
15.30 - 20.00 m³ / 20.0 - 26.2 yd³
Shovel Capacity:
15.30 - 20.50 m³ / 20.0 - 26.8 yd³
NTB_R9350_BT_enGB.indd 1
01.04.10 18:34
R 9350
Operating Weight with Backhoe Attachment:
302,000 kg / 665,800 lb
Operating Weight with Shovel Attachment:
310,000 kg / 683,400 lb
Engine Output:
2
1,120 kW / 1,500 hp
Bucket Capacity:
15.30 - 20.00 m³ / 20.0 - 26.2 yd³
Shovel Capacity:
15.30 - 20.50 m³ / 20.0 - 26.8 yd³
R 9350
NTB_R9350_BT_enGB.indd 2
02.04.10 14:49
Productivity and Efficiency
Customer Support
Liebherr’s R 9350 mining excavator integrates the latest
technology to perform efficiently in all types of mining environments. Even under the hardest conditions, it achieves
high productivity. Always ready for job, the R 9350 is your
key to the lowest operating and owning cost per tonne.
On site, Liebherr’s customer support delivers tailor-made
professional solutions to your project specifics and site
requirements. Liebherr offers a partnership with the goal
of mining more for less.
Reliability
More than 50 years of experience in designing and manufacturing hydraulic excavators are the basis for the outstanding reliability of the R 9350. This excavator combines innovative solutions, excellent design and Liebherr
long-life components, ensuring maximum availability and
performance throughout the whole equipment life.
Operating and Servicing
The R 9350’s operator cab creates a comfortable and
ergonomic working environment. The electronic machine
controls assure the best operator performance throughout
each shift. Furthermore, the ergonomic component access
and long service intervals assist the service team to ensure
more uptime.
Safety and Environment
The Liebherr R 9350 provides uncompromising safety for
operators and maintenance crews, with innovative technologies integrated into the machine.
R 9350
NTB_R9350_BT_enGB.indd 3
3
01.04.10 18:34
Electronic Cylinder End Position Control
• Patented system based on electronic control
• Smooth attachment movements even when
working close to cylinder end position
• No shocks when reaching attachment
end position
• No oil heating when reaching cylinder
end position
• Energy saving by limiting the oil flow
• Allows the operator to focus on loading
4
R 9350
NTB_R9350_BT_enGB.indd 4
01.04.10 18:34
Productivity and Efficiency
Liebherr’s R 9350 mining excavator integrates the latest technology to perform
efficiently in all types of mining environments. Even under the hardest conditions, it achieves high productivity. Always ready for job, the R 9350 is your key
to the lowest operating and owning cost per tonne.
Reach a New Level of Productivity
Liebherr Electronic
Machine Control
Litronic
Liebherr’s electronic machine control Litronic contributes to fast loading cycles and easy control,
even if multiple movements are required at the
same time. The electronic control of the hydraulic
system enhances pressure and flow distribution as
a function of the machine movement. Thanks to the
electronic cylinder end position control the operator can fully focus on the job.
High Digging Forces
The production-tailored attachment kinematics
combined with a mining-optimized bucket shape
ensure the highest crowd and breakout forces. Even
under tough conditions Liebherr’s R 9350 high digging force allows easy bucket penetration and high
bucket fill factors achieving high productivity.
Closed Loop
Swing Circuit
With an independent swing circuit the machine allows the maximum swing torque whilst retaining
the full oil flow for the working circuit.
Compact Machine
Design
Liebherr’s excavator design is well-balanced and
provides best machine stability. The high weight
distribution towards the undercarriage contributes
to an efficient utilization of the strong digging forces
and a favorable power to weight ratio of the uppercarriage and attachment.
Efficiency for Less Cost
Efficient Cooling
System
Liebherr’s large dimensioned cooling system reduces fan power consumption and ensures an ideal
machine temperature. The hydrostatic fans operate
always on the required level.
High Hydraulic
Efficiency
The high pressure level of Liebherr hydraulic system together with the optimized pipe and hose layout maximize the usable power transmission. The
Pressure Less Boom Down function combined with
the oil regeneration on the attachment saves energy and reduces swing back time.
Automatic Idle Control
Liebherr Buckets
The electronic control of the hydraulic
system and engine allows automatic
idle mode contributing to:
• The right size for each application
• Less fuel consumption
• Load on the engine
• Robust structural design adapted to
machine’s high digging and breakout
forces
• Customized and site-specific wear
packages configuration
• Face shovel and backhoe configuration
available
R 9350
NTB_R9350_BT_enGB.indd 5
5
01.04.10 18:34
Finite Element Analysis (FEM)
• Multibody simulations
• Fatigue calculations for longest
possible lifetimes
6
R 9350
NTB_R9350_BT_enGB.indd 6
01.04.10 18:34
Reliability
More than 50 years of experience in designing and manufacturing hydraulic excavators are the basis for the outstanding reliability of the R 9350. This excavator combines innovative solutions, excellent design and Liebherr long-life components, ensuring maximum availability and performance throughout the whole
equipment life.
Experience Liebherr Quality
Over 50 Years of
Experience
Since 1954, Liebherr has been designing, manufacturing and servicing crawler mounted excavators used
in toughest applications. Like its predecessors, Liebherr’s R 9350 benefits from this long-time experience
in the customer-focused design with modern engineering solutions and extensive mining knowledge.
Quality Management
Liebherr’s quality processes commence with the
machine design and simulations. Liebherr meets
the highest industry standards for special selections
of steels and selection of special casting materials.
During manufacturing and assembly, Liebherr quality management follows all manufacturing steps,
ensuring highest quality of each machine delivered.
Liebherr hydraulic excavator plants are ISO 9001
certified.
Heavy Duty Excavator
First-class components and machine steel structures ensure a high machine reliability, even in hard
mining conditions.
Advanced Design of All Mining Applications
Machine Design
Liebherr’s design processes include the latest and
product specific numerical engineering tools, such as
Finite Element Analyses, Fatigue Calculations, Torque
and Displacement Analysis and Multibody Simulations. These modern techniques allow reliable engineering solutions for series and special applications.
Specific Solutions
As each project is unique, Liebherr is developing and
supplying solutions to ensure performance and reliability in specific mining environments. Liebherr’s R 9350
can be customized to operate in regions with temperatures of down to -40°C / -40°F or up to 55°C / 131°F, as
well as in high-altitude regions of up to 4,500 m above
sea level. Liebherr offers specific bucket-tailored solutions for each type of application also in direct digging
conditions.
High Altitude Kit
Liebherr Components
Design to offer maximum reliability
for operation in high altitude:
• Major components developed
and manufactured in-house
• Integration in machine structure
• Designed specifically for mining
operations
• Adapted engine
• Pressurized hydraulic tank
• Liebherr Service Exchange Program
• Combination with cold kit possible
R 9350
NTB_R9350_BT_enGB.indd 7
7
01.04.10 18:34
Service Exchange Units (SEU)
Rebuild programs for components
are conducted by Liebherr-certified
repair shops, using best practice
guidance to ensure:
• Maximum component life
• Long-term reliability
• High performance
• Cost-efficiency
• High quality
8
R 9350
NTB_R9350_BT_enGB.indd 8
01.04.10 18:34
Customer Support
On site, Liebherr’s customer support delivers tailor-made professional solutions
to your project specifics and site requirements. Liebherr offers a partnership with
the goal of mining more for less.
Your Mining Partner
Parts Logistics
and Services
Liebherr parts and service follow the machine into the
field with international logistics platforms ensuring
parts supply and maintenance services worldwide.
Customized Service
and Product Support
Depending on specific requirements, Liebherr offers tailored support solutions integrating parts
exchange and management agreements, service
and maintenance on site or maintenance management agreements.
Service Exchange Units
Rebuild programs for components are conducted
by Liebherr-certified repair shops, ensuring rebuilt
component life and reliability match new component performance expectations.
Complete Training
Solutions
Dedicated to mining the Liebherr training team provides operator and maintenance staff training programs to allow cost-efficient and safe operations.
Liebherr offers customized on-site training courses
according to your needs.
Factory Support
Service Engineering
Liebherr design and field service engineers accompany the excavators throughout the whole machine
life. Liebherr’s sales and service organizations and
the Liebherr factories’ product engineering groups
provides fast and proactive support to the mining
industry.
Service Tools
Liebherr affords service tools for excavator-specific
maintenance which ensure safe working even when
hand-ling large excavator components.
Liebherr Service Tools
Liebherr Training Programs
• Fast component replacement
Competence-based training,
employing an interdisciplinary
learning strategy:
• Designed specifically for requirements
on Liebherr machines
• High operational safety
• Cost-efficiency for service operations
• Usable on different excavator sizes
• Liebherr Mining Training Centers
• Available in different languages
• Customized training
courses on site
R 9350
NTB_R9350_BT_enGB.indd 9
9
01.04.10 18:34
Electronic Machine
Controls & Diagnostics
• Electronic joysticks for easy
machine operations
• LCD operator display for
machine control and easy
service diagnostic
• Each lubrication circuit can
be set individually through
operator’s dashboard
10
R 9350
NTB_R9350_BT_enGB.indd 10
01.04.10 18:34
Operating and Servicing
The R 9350’s operator cab creates a comfortable and ergonomic working environment. The electronic machine controls assure the best operator performance
throughout each shift. Furthermore, the ergonomic component access and long
service intervals assist the service team to ensure more uptime.
Operator Workplace
Comfortable Working
Environment
The R 9350’s spacious cab offers ideal working
condi-tions and first-class comfort. The adjustable air suspen-sion seat fits to individual needs.
Best visibility over the whole working environment
is provided by the enhan-ced position of the cab.
The hanging arch hose arrange-ment allows to
oversee large areas of the uppercarriage. Additionally a camera system shows areas that can’t
be observed directly. The cab’s effective insulation
creates a quiet working environment for maximum
productivity.
Ergonomic Control
Elements
The configuration and placement of operator control
elements and monitoring displays are perfectly coordinated to support the productive performance. The
electronic control is easy and intuitive to use. The
dashboard and machine control panel are easy to access and arranged for fast overview on major machine
functions.
Easy Serviceability
Ergonomic Service
Access
The Liebherr R 9350 provides ergonomic component access for fast and efficient service. All service
points are within reach through large catwalks and
walkways. The centralized drop down flap allows
easy and safe refilling and exchange of all service
fluids, preventing spillage and reducing contamination by dust. The electronic health monitoring system
assists in trouble-shooting and maintenance tasks.
Liebherr excavators are equipped with louvers for
easy access of ground based support tools.
Extended Service
Intervals
Designed for mining operations the R 9350 offers
all features for extended machine services intervals. The filtration systems with integrated bypass
hydraulic oil filters and the large grease systems
are only two of them. The fuel tank enables an operation beyond 24 hours prior re-fuelling.
Comfort in Cab
Extended Service Intervals
• Tinted safety glass all-around with heavy
duty sun louvers on all windows
• Large fuel tank capacity for
24 hours machine endurance
• Pressurized to prevent dust penetration
• Oil sample points oil analyses
• Low vibrating and soundproof
• Air filter cyclone pre-cleaner
with automatic dust ejection
• Operator eye level of 6.60 m / 21’7’’
for clear view of truck body and overall
digging area
• Automatic single-line central
lubrication system
R 9350
NTB_R9350_BT_enGB.indd 11
11
01.04.10 18:34
Safe Machine Access
• Powered access ladder with
perforated steps
• Access ladders and catwalks feature
handrails and slip-resistant surfaces
• Emergency egress with handrail
at the front of the excavator
• Optional 45° stair access
12
R 9350
NTB_R9350_BT_enGB.indd 12
01.04.10 18:34
Safety and Environment
The Liebherr R 9350 provides uncompromising safety for operators and maintenance crews, with innovative technologies integrated into the machine.
Safety Integrated Design
Easy and Safe
Machine Access
All railings and catwalks are laid out to easily access all relevant machine areas. An optional 45°
stair helps accessing the machine comfortably. In
case of emergency stops the stair is automatically
activated.
Protected Operator
and Service Crew
The cab has an integrated FOPS structure. The armored front and attachment side windows create
a safe working environment for operators. All other
windows are of laminated safety glass. Emergency stop arrangements in the cab as well as in the
pump compartment, valve bank, engine compartment and at ground level ensure safe maintenance
tasks. Safety standards are achieved by a separated engine and pump compartment, heat insulation on turbochargers and on the exhaust system
as well as by the use of heavy duty high resistant
hydraulic hoses.
Environmental Care
Ecological Features
Throughout the whole design and manufacturing process of Liebherr machines, environmental protection
is given high priority. Material used for machine assembly is recyclable at 95 %. The hydraulic system allows the use of biodegradable hydraulic oils. The automatic idle mode contributes to less fuel consumption and less load on the engine resulting in reduced
CO2 emissions.
Electrical Drive for
Even More Power
and Efficiency
Liebherr’s fully integrated optional electrical drive
system allows for high operating efficiency and additional power. Due to the long service intervals of electrical motors, uptime can be enhanced while maintenance costs are decreased. The silent electrical drive
contributes to health and safety requirements.
Operation under
Sound Restriction
Liebherr provides solutions for operations close
to residential areas with machine-specific sound
attenuation packages. The approach is based on
both removal of noise at the source and passive
sound attenuation resulting in low machine noise
emissions.
Electric Motor
Sound Attenuation Kit
• High efficiency
• Full integration into
machine structure
• Long service intervals
• Reduced maintenance costs
• Higher component lifetime
due to less vibration
• Silent electric drive contributes to
health, safety and environmental care
• Noise-optimised fan regulation
• Increased mufflers, additional
silencers and tail pipe absorbers
• Long life sound attenuation
on doors and walls
• Sound attenuation louvers
R 9350
NTB_R9350_BT_enGB.indd 13
13
01.04.10 18:35
Technical Data
Engine
1 Cummins diesel engine
Rating per
SAE J 1995���������������� 1,120 kW/1,500 hp at 1,800 rpm
Model������������������������ QSK45 (Tier 1)
Type�������������������������� 12 cylinder turbocharged V-engine
after-cooler
two separate water cooling circuits
direct injection system
Displacement������������� 45 l/2,745 in3
Bore/Stroke���������������� 159/190 mm / 6.26/7.48 in
Engine cooling system������ fans driven via hydraulic piston motor
Air cleaner����������������������� dry-type air cleaner with pre-cleaner, with
automatic dust ejector, primary and safety
elements
Fuel tank������������������������� 5,815 l/1,536 gal
Electrical system
Voltage���������������������� 24 V
Batteries�������������������� 4 (+ 2) x 170 Ah/12 V
Alternator������������������� 24 V/260 Amp
Engine idling�������������������� sensor controlled
Electronic engine
control system����������������� engine speed sensing over the entire
­engine RPM range. Provides integration of
engine with other machine systems
Electric Motor (optional)
1 electric motor
Power output������������������� 1,200 kW/1,610 hp
Type������������������������������� 3 phase AC squirrel cage motor
Voltage���������������������������� voltage on request
Frequency����������������������� 50 Hz (or 60 Hz – dependent on country)
Revolutions���������������������� 1,500 rpm or 1,800 rpm
Motor cooling ������������������ integrated air-to-air heat exchanger
Starting method��������������� reduction of inrush current
Hydraulic System
Hydraulic pumps
for attachment and
travel drive����������������� 4 variable flow axial piston pumps
Max. flow������������������� 4 x 754 l/min. / 4 x 199 gpm
Max. hydr. pressure���� 320 bar/4,640 psi
Hydraulic pump
for swing drive������������ 2 reversible swash plate pumps, closedloop circuit
Max. flow������������������� 2 x 390 l/min. / 2 x 103 gpm
Max. hydr. pressure���� 350 bar/5,076 psi
Pump management���������� electronically controlled pressure and flow
management with oil flow optimisation
Hydraulic tank capacity����� 2,200 l/581 gal
Hydraulic system
capacity�������������������������� 4,200 l/1,110 gal
Hydraulic oil filter�������������� 1 high pressure safety filter after each high
pressure pump + fine filtration of entire
return flow
Hydraulic oil cooler����������� 2 separate coolers, 2 temperature con­
trolled fans driven via hydraulic piston
motor
14
Hydraulic Controls
Servo circuit �������������������� independant, electric over hydraulic proportional controls of each function
Emergency control������ via accumulator for all attachment functions with stopped engine
Power distribution ������������ via monoblock control valves with inte­
grated primary relief valves and flanged on
secondary valves
Flow summation��������� to attachment and travel drive
Control functions
Attachment and
swing ������������������������ proportional via joystick levers
Travel������������������������ proportional via foot pedals or hand levers
Bottom dump bucket�� proportional via foot pedals
Electric System
Electric isolation��������������� easy accessible battery isolations
Working lights������������������ high brightness halogen lights:
– 2 on working attachment
– 1 on RHS of uppercarriage
– 3 on LHS of uppercarriage
– 2 on counterweight
Xenon lights in option
Emergency stop switches�� at ground level, in hydraulic compartment,
in engine compartment and in operator cab
Electrical wiring���������������� heavy duty execution in IP 65 standard for
operating conditions of – 50 °C to 100 °C/
– 58 °F to 212 °F
Swing Drive
Hydraulic motor���������������� 2 Liebherr axial piston motors
Swing gear���������������������� 2 Liebherr planetary reduction gears
Swing ring ����������������������� Liebherr, sealed triple roller swing ring,
internal teeth
Swing speed�������������������� 0 – 3.9 rpm
Swing-holding brake��������� hydraulically released, maintenance-free,
multi-disc brakes integrated in each swing
gear
Uppercarriage
Design ���������������������������� torque resistant designed upper frame in
box type construction for superior strength
and durability
Attachment mounting ������� parallel longitudinal main girders in boxsection construction
Machine access��������������� on the cab side with a hydraulically driven
access ladder, additional emergency ladder
in front of the cab
Service Flap
Design����������������������������� hydraulically actuated service flap, with
lighting easily accessible from ground level
to allow:
– fuel fast refill
– hydraulic oil refill
– engine oil quick change
– splitterbox oil quick change
– swing gearbox oil quick change
– swing ring teeth grease barrel refilling via
grease filter
– attachment/swing ring bearing grease
barrel refilling via grease filter
– windshield wash water refilling
Other coupler type on request
R 9350
NTB_R9350_T_enGB-US_10-03.indd 14
01.04.10 10:51
Technical Data
Operator’s Cab
Design ���������������������������� resiliently mounted, sound insulated,
large windows for all around visibility,
integrated falling object protection FOPS
Operator’s seat���������������� suspended, body-contoured with shock
absorber, adjustable to operator’s weight
Cabin windows ���������������� 20.5 mm/0.8 in tinted armored glass for
front window and right hand side windows,
all other windows in tinted safety glass,
high pressure windshield-washer system
75 l/20 gal watertank,
steel sun louvers on all windows in heavy
duty design
Heating system/
Air conditioning���������������� 1 heating system + air conditioning (double
unit optionally available)
Cabin pressurization��������� ventilation with filter
Controls�������������������������� joystick levers integrated into armrest of
seat
Monitoring����������������������� via LCD-Display, data memory
Rear vision system������������ camera installation on counterweight and
right-hand side of the uppercarriage displayed over an additional LCD-display
Automatic engine
shut off���������������������������� engine self-controlled shut off
Destroking of main
pumps����������������������������� in case of low hydraulic oil level
Safety functions �������������� aditional gauges with constant display for:
engine speed, hourmeter, voltmeter, safety
mode for engine speed control and pump
regulation
Noise level (ISO 6396)������� Diesel: Lpa (inside cab) = 76 dB(A)
with oil/water fans at 100 % and AC fan at
65 %
Electric: Lpa (inside cab) = 74,7 dB(A)
with oil/water fans at 100 % and AC fan at
65 %
Central Lubrication System
Type������������������������������� Lincoln Centromatic lubrication system, for
the entire attachment/swing ring bearing
and teeth
Grease pumps ����������������� Lincoln Powermaster pump plus separate
pump for swing ring teeth
Capacity�������������������������� 200 l/53 gal bulk container for attachment/
swing ring bearing, separated 80 l/21 gal
container for swing ring teeth
Refill ������������������������������� via the service flap for both containers, fill
line with grease filters
Attachment
Design ���������������������������� box-type structure with large steel castings
in all high-stress areas
Pivots������������������������������ sealed with double side centering with
1 single floating pin per side,
all bearings with wear resistant steel
­bushings,
bolts hardened and chrominium-plated
Hydraulic cylinder������������� Liebherr design, all cylinders located in well
protected areas
Hydraulic connections������� pipes and hoses equipped with SAE splitflange connections
Kinematics����������������������� Liebherr parallel face shovel attachment
geometry, electronic controlled end-­
cushioning
Undercarriage
Design����������������������������� 3-piece undercarriage,
box type structures for center piece and
side frames (stress relieved steel work
component as a standard)
Hydraulic motor���������������� 2 axial piston motors per side frame
Travel gear����������������������� Liebherr planetery reduction gear
Travel speed�������������������� 0 – 2.5 – 3.3 km/h / 0 – 1.60 – 2.00 mph
Parking brake������������������� spring engaged, hydraulically pressure
­released wet multi-disc brakes for each
­travel motor, maintenance-free
Track components������������ D 12, maintenance-free,
forged double grouser pad
Track rollers/
Carrier rollers������������������� 9/2
Automatic track
tensioner������������������������� pressurized hydraulic cylinder with accumulator and grease tensioner
Transport������������������������� undercarriage side frames are removable
NTB_R9350_T_enGB-US_10-03.indd 15
R 9350
15
01.04.10 10:51
Dimensions
A2
F
E
A1
D
A
W1 W
OEL
H
H1
C
H2
K
P
Q
L
N
U
S
Z
B
V
G
X
A
A1
A2
C
D
E
F
H
H1
H2
K
L
P
mm/ft in
5,800/19’  
6,720/22’  
7,400/24’  3”
7,800/25’  7”
6,395/20’11”
6,395/20’11”
3,100/10’  2”
5,480/17’11”
6,500/21’  3”
7,075/23’  2”
2,280/  7’  5”
6,400/20’11”
2,494/  8’  2”
Q
S
U
Z
N
B
G
V
W
W1
X
OEL Operator’s Eye Level
mm/ft in
982/  3’2”
5,000/16’4”
8,334/27’4”
10,470/34’4”
850/  2’9”
5,850/19’2”
6,340/20’9”
11,800/38’8”
8,100/26’6”
8,700/28’6”
18,450/60’6”
6,600/21’7”
A2
F
E
A1
D
A
W1
H
OEL
H1
C
H2
K
P
Q
L
N
U
S
Z
B
V1
G
X1
A
A1
A2
C
D
E
F
H
H1
H2
K
L
16
mm/ft in
5,800/19’  
6,720/22’  
7,400/24’  3”
7,800/25’  7”
6,395/20’11”
6,395/20’11”
3,100/10’  2”
5,480/17’11”
6,500/21’  3”
7,075/23’  2”
2,280/  7’  5”
6,400/20’11”
P
Q
S
U
Z
N
B
G
V1
W1
X1
OEL Operator’s Eye Level
mm/ft in
2,494/  8’  2”
982/  3’  2”
5,000/16’  4”
8,334/27’  4”
10,470/34’  4”
850/  2’  9”
5,850/19’  2”
6,340/20’  9”
15,900/52’  1”
7,100/23’  3”
20,700/67’10”
6,600/21’  7”
R 9350
NTB_R9350_T_enGB-US_10-03.indd 16
01.04.10 10:51
Backhoe Attachment
with Gooseneck Boom 9.30 m/30’6”
ft
m
60
18
50
Digging Envelope
Stick length
16
14
40
12
10
30
8
20
4
16.30 m/53’5”
15.40 m/50’6”
10.20 m/33’5”
9.50 m/31’1”
Max. digging force (SAE)
Max. breakout force (SAE)
880 kN/197,832 lbf
1,020 kN/229,305 lbf
Operating Weight
and Ground Pressure
2
0
The operating weight includes the basic machine with backhoe
attachment and a 18.00 m3/23.5 yd3 bucket.
-2
Pad width
Weight
Ground pressure
-10
-4
-20
Max. reach at ground level
Max. teeth height
Max. dump height
Max. digging depth
6
10
0
4.20 m/13’9”
-6
mm/ft in 850/2’9”
kg/lb 302,000/665,795
kg/cm2 / psi 2.51/35.70
-8
-30
-10
18
60
16
14
50
12
40
10
30
8
6
20
4
2
10
0 m
0 ft
Buckets
For materials classe
according to VOB, Section C, DIN 18300
Typical operation
according to VOB, Section C, DIN 18300
Capacity ISO 7451
m3
yd3
Suitable for material up to a specific weight of t/m3
lb/yd3
Cutting width
mm
ft in
Weight
kg
lb
< 5
5 – 6
5 – 6
5 – 6
7–8
GP
20.00
26.16
1.7
2,867
3,700
12’1”
16,150
35,605
HD
17.00
22.24
1.9
3,204
3,400
11’1”
18,250
40,234
HD
18.00
23.54
1.8
3,035
3,400
11’1”
18,350
40,455
HD
19.00
24.85
1.6
2,698
3,600
11’9”
19,600
43,211
XHD
15.30
20.01
1.9
3,204
3,400
11’1”
20,350
44,864
GP: General purpose bucket with Esco S95 teeth
HD: Heavy-duty bucket with Esco S95 teeth
XHD:Heavy-duty rock bucket with Esco S95 teeth
NTB_R9350_T_enGB-US_10-03.indd 17
R 9350
17
01.04.10 10:51
Shovel Attachment
with Shovel Boom 6.75 m/22’1”
ft
m
60
17
Digging Envelope
Stick length
50
Max. reach at ground level
Max. dump height
Max. crowd length
Bucket opening width T
14
40
12
T
30
8
1040 kN/233,801 lbf
1300 kN/292,252 lbf
1060 kN/238,297 lbf
6
Operating Weight
and Ground Pressure
4
10
2
0
13.75 m/45’1”
11.20 m/36’8”
5.20 m/17’ 
2.50 m/  8’2”
Crowd force at ground level
Max. crowd force
Max. breakout force
10
20
4.20 m/13’9”
16
The operating weight includes the basic machine with shovel attachment and a 18.00 m3/23.5 yd3 bucket.
0
Pad width
Weight
Ground pressure
-2
-10
-4
14
50
12
40
10
8
30
6
4
20
2
10
mm/ft in 850/2’9”
kg/lb 310,000/683,432
kg/cm2 / psi 2.58/36.70
0m
0 ft
Bottom Dump Buckets
For materials classe
according to VOB, Section C, DIN 18300
Typical operation
according to VOB, Section C, DIN 18300
Capacity ISO 7546
m3
yd3
Suitable for material up to a specific weight of t/m3
lb/yd3
Cutting width
mm
ft in
kg
Weight
lb
Wear kit level
GP:
HD:
XHD:
< 5
< 5
< 5
5 – 6
5 – 6
7 – 8
7–8
GP
15.30
20.01
2.2
3,710
4,100
13’5”
29,900
65,918
I
GP
17.00
22.24
2.0
3,373
4,100
13’5”
30,600
67,461
I
GP
20.50
26.81
1.6
2,698
4,100
13’5”
31,000
68,343
I
HD
17.00
22.24
1.9
3,204
4,100
13’5”
31,620
69,710
II
HD
18.00
23.54
1.8
3,035
4,100
13’5”
31,900
70,327
II
XHD
15.30
20.01
1.9
3,204
4,100
13’5”
35,000
77,162
III
XHD
16.50
21.58
1.7
2,867
4,100
13’5”
35,950
79,256
III
General purpose bucket with Esco 85SV2 teeth
Heavy-duty bucket with Esco 85SV2 teeth
Heavy-duty rock bucket with Esco 85SV2 teeth
Level I:For non-abrasive materials, such as limestone, without flint inclusion, shot material or easily breakable rock, i.e., deteriorated rock, soft
limestone, shale, etc.
Level II: For preblasted heavy rock, or deteriorated, cracked material (classification 5 to 6, according to DIN 18300)
Level III:For highly-abrasive materials such as rock with a high silica content, sandstone etc.
18
R 9350
NTB_R9350_T_enGB-US_10-03.indd 18
01.04.10 10:51
L
L
Component Dimensions and Weights
H
L
L
H
L
H
H
L
H
Cab
L
H
Length
Height
Width
Weight
mm/ft in
mm/ft in
mm/ft in
kg/lb
3,600/11’9”
2,900/  9’6”
2,315/  7’7”
3,500/7,716
mm/ft in
mm/ft in
mm/ft in
kg/lb
2,415/7’11”
2,550/8’  4”
2,550/8’  4”
3,500/7,716
mm/ft in
mm/ft in
mm/ft in
kg/lb
2,970/9’  8”
2,930/9’  7”
2,130/6’11”
3,700/8,157
mm/ft in
mm/ft in
mm/ft in
mm/ft in
mm/ft in
mm/ft in
kg/lb
4,800/15’  8”
3,000/  9’10”
3,700/12’  1”
4,400/14’  5”
2,200/  7’  2”
2,950/  9’  8”
17,500/38,581
L
L
H
L
Cab Elevation
H
L
H
H
H
Length
Height
Width
Weight
H
H
L
Fuel Tank
H
L
H
H
L
H
L
H
L
H
H1
H
L
H
L
H1
H
L
H2
L
Powerplant
L Length
H Height
H1Height
H2Height
B Width
B1Width
Weight
B
H2
B1
H1
H1
H1
Length
Height
Width Weight
H2
H2
B
H2
B1
B
B1
B
L
L
L
BB1
Rotation Deck
(with swing ring, swing gears,
control valve bracket engine with pumps)
B1
H
L
H
L
L
Length
Height
Width
Weight
mm/ft in
mm/ft in
mm/ft in
kg/lb
8,100/26’6”
3,882/12’8”
3,700/12’1”
42,700/94,137
mm/ft in
mm/ft in
mm/ft in
kg/lb
1,100/  3’7”
3,250/10’7”
6,000/19’8”
25,320/55,821
L
H
L
H
L
H
Counterweight
H
H
L
H
L
H
Length
Height
Width
Weight
L
L
L
H
H
L
L
H
H
R 9350
19
H
NTB_R9350_T_enGB-US_10-03.indd 19
01.04.10 10:51
The right side is 2 mm smaller
H
L
H
L
Component Dimensions and Weights
H
L
The right side is 15 mm smaller (fold-out page)
L
L
H
Hydraulic Tank
L
H
H
H
L
H
Length
Height
Width
Weight
mm/ft in
mm/ft in
mm/ft in
kg/lb
4,920/16’  1”
2,900/  9’  6”
1,820/  5’11”
7,870/17,350
kg/lb
2,940/6,482
mm/ft in
mm/ft in
mm/ft in
kg/lb
2,140/7’  ”
2,960/9’8”
700/2’3”
1,900/4,189
Hydraulic Oil
L
Weight
L
L
H
Catwalk Box Left
H
H
L
H
Length
Height
Width
Weight
H
L
L
L
H
H
Catwalk Box Right
H
H
L
H
L
L
L
H
2,120/6’11”
2,960/9’  8”
950/3’  1”
800/1,764
Length
mm/ft in
Height
mm/ft in
Width over travel drive
mm/ft in
Width without travel drive mm/ft in
Weight
kg/lb
8,334/27’  4”
2,360/  7’  8”
2,055/  6’  8”
1,485/  4’10”
2 x 43,350/2 x 95,570
H
L
L
L
H
H
mm/ft in
mm/ft in
mm/ft in
kg/lb
Side Frame (two)
L
H
Length
Height
Width
Weight
H
H
L
Undercarriage Central Girder
L
H
Length
Height
Width
Weight
mm/ft in
mm/ft in
mm/ft in
kg/lb
3,670/12’ 
2,482/  8’1”
3,670/12’ 
25,600/56,438
mm/ft in
mm/ft in
mm/ft in
kg/lb
7,250/23’  9”
2,350/  7’  8”
2,400/  7’10”
25,200/55,556
L
Shovel Boom
H
L
H
L
Length
Height
Width
Weight
H
L
NTB_R9350_T_enGB-US_10-03.indd 20
R 9350
L
20
01.04.10 10:51
H
L
H
L
L
Shovel Hoist Cylinder (two)
H
H
L
L
H
L
LL
L
4,690/15’4”
550/  1’9”
2 x 3,510/2 x 7,738
L
H
Length
Height
Width
Weight
mm/ft in
mm/ft in
mm/ft in
kg/lb
4,700/15’4”
1,900/  6’2”
2,250/  7’4”
12,750/28,109
H
L
H
mm/ft in
mm/ft in
kg/lb
Shovel Stick
H
L
L Length
Ø Diameter
Weight
L
Crowd Cylinder (two)
L
L Length
Ø Diameter
Weight
H
mm/ft in
mm/ft in
kg/lb
3,350/10’11”
L
400/  1’  3”
2 x 1,470/2 x 3,241
H
L
LL
Bottom Dump Bucket
H
Application
Capacity ISO 7451
L Length
H Height
Width
Weight
H
L L
L
H
L
m3/yd3
mm/ft in
mm/ft in
mm/ft in
kg/lb
HD
18.00/23.54
4,200/13’9”
3,800/12’5”
4,200/13’9”
31,500/69,446
H
HH
L
H
H
L
Bucket Tilt Cylinder (two)
L
H
L Length
Ø Diameter
Weight
L
mm/ft in
mm/ft in
kg/lb
L
3,950/12’11”
H
450/1’  5”
2 x 2,015/2 x 4,442
L
L
H
L
Gooseneck Boom
with Stick Cylinders
L
H
H
L
Length
Height
Width
Weight
H
mm/ft in
mm/ft in
mm/ft in
kg/lb
L
L
9,800/32’1”
3,900/12’9”
2,200/  7’2”
30,700/67,682
H
L
Backhoe Hoist Cylinders (two)
L
L Length
Ø Diameter
Weight
L
mm/ft in
mm/ft in
kg/lb
4,680/15’4”
550/  1’9”
L
2 x 3,800/2 x 8,378
LL
H
H
L
H
H
L
L
NTB_R9350_T_enGB-US_10-03.indd 21
H
L
R 9350
21
H
H
01.04.10 10:51
The right side is 15 mm smaller (fold-out page)
Component Dimensions and Weights
L
H
Component Dimensions and Weights
H
L
L
H
Stick with Bucket Cylinders
mm/ft in
mm/ft in
mm/ft in
kg/lb
6,000/19’  8”
2,400/ 
7’10”
L
1,750/  5’  8”
18,940/41,756
L
Backhoe Bucket
H
L
Application
Capacity ISO 7451
L Length
H Height
Width
Weight
m3/yd3
mm/ft in
mm/ft in
mm/ft in
kg/lb
HD
18.00/23.54
4,200/13’9”
2,800/  9’2”
H
3,500/11’5”
18,155/40,025
L
H
H
L
L
Liebherr-France SAS Mining Division
49 rue Frédéric Hartmann, CS 50038, F-68025 Colmar Cedex
 +33 369 49 21 99, Fax +33 369 49 22 79
www.liebherr.com, E-Mail: info.lfr-mining@liebherr.com
NTB_R9350_T_enGB-US_10-03.indd 22
01.04.10 10:51
The right side is 2 mm smaller
Length
Height
Width
Weight
Printed in Chile RG-BK-RP LFR/SP 11003237-03.10_enGB-US All illustrations and data may differ from standard equipment. Subject to change without notice. All indicated loads are based in accordance with ISO 9248.
L
H
H
L
Download PDF
Similar pages