Samsung DVD-HD841 User Guide Manual

DVD Player
DVD-HD841
!
Downloaded from www.Manualslib.com manuals search engine
1) Read these instructions.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
This symbol indicates "dangerous voltage" inside the product that presents a
risk of electric shock or personal injury.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
This symbol indicates important
instructions accompanying the
product.
8) Do not install near any heat sources such as radiators, heat registers_ or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong.
Do not install this equipment
: To prevent damage which may result in fire or electric shock hazard, do not
expose this appliance to rain or moisture.
CAUTION
: DVD PLAYERS
USE AN INVISIBLE
LASER BEAM WHICH CAN
CAUSE HAZARDOUS
RADIATION
EXPOSURE
IF DIRECTED.
BE SURE TO OPERATE
PLAYER CORRECTLY
AS INSTRUCTED.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs_convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with cart, stand, tripod_ bracket_or table specified by the
manufacturer, or sold with the apparatus.
13) Unplug this apparatus. When a cart is used_use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture_ does
not operate normally, or has been dropped.
in a confined space such as a bookcase or similar unit.
WARNING
CAUTIONS
Caution: To prevent electric shock, match wide blade of plug to wide slot, fulty insert.
Attention: Pour eviter les chocs 6Iectriques introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond.
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to
other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with tile limits for a Class B digital device_ pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates_ uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets alt requirements of the Canadian Interference -Causing Equipment Regulations
Downloaded from www.Manualslib.com manuals search engine
CAUTION
THiS PRODUCT UTiLiZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT iN
HAZARDOUS RADiATiON EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELf
REFER SERVICING TO QUALIFIED PERSONNEL.
Note:
• This unit can be used only where the power supply is AC 120V_ 60Hz. it cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information.
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,
the DVD player cannot play the disc.
• This device is protected by U.S. Patent Nos. 4,631,603; 4,577,216; 4,8t9,098; 4,907,093; and
6_516,132. This product incorporates copyright protection technology that is protected by U.S. patents
and other intellectual property rights. Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Handlinq
Batteries for
Remote Control
Remote Control
(AK59-00025A)
(AAA Size)
(AC43-12002H)
Disc Storaae
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a coot ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
User's Manual
Video/Audio
(AK68-00342P)
Cable
(AC39-42001 R)
DVI Cable
(AK39-O0039A)
Install Batteries
in the Remote
1. Open the battery cover on the back of the
remote.
2. Insert two AAA batteries. Make sure that the
Disc Type and Characteristics
.............
Description-Front Panel ..................
Display Indicators ......................
Description-Rear Panel ..................
Tour of the Remote Control ..............
7
8
8
9
10
Connections
Choosing a Connection
.................
11
Playing a Disc ........................
Using the Search & Skip Functions ........
Using the Display Function ...............
Using the Disc and Title Menu ............
Using the Function Menu ................
Repeat Play ..........................
Program Play & Random Play ............
Stow Repeat Play ......................
15
16
16
17
18
18
19
19
Advanced Functions
Adjusting the Aspect Ratio (EZ View) .......
Selecting the Audio Language ............
Selecting the Subtitle Language ...........
Changing the Camera Angle .............
Using the Instant Replay/Skip Function .....
Using the Bookmark Function ............
Using the Zoom Function ................
Super Audio CD Playback ...............
DVD AUDIO Playback ..................
Clips Menu for MP3/WMA/JPEG
..........
FoIder Selection .......................
20
21
21
22
22
23
24
24
26
27
28
MP3/WMA Playback
Picture CD Playback
28
29
...................
...................
polarities (+ and -) are aligned correctly.
3. Replace the battery cover.
If remote doesn't operate properly
• Check the polarity + - of the batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
Downloaded from www.Manualslib.com manuals search engine
2
3
5
6
Basic Functions
Cautions
• Before connecting other components to this player_be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player's
internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity can affect normal operation of this player.
if this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don't intend to use the player for long
periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
Setup
Important Safety Instructions ..............
Precautions ...........................
Before you start ........................
General Features .......................
Changing Setup menu
Using the Setup Menu ..................
Setting Up the Language Features .........
Setting Up the Audio Options .............
Surround Sound Speaker Setup ...........
Setting Up the Display Options ............
Setting Up the Parental Control ...........
30
31
33
34
35
36
Reference
Controlling a TV with the Remote ..........
Troubleshooting .......................
Specifications
........................
Warranty ............................
38
39
41
42
Excellent
Sound
Dotby Digital, a technology developed by Dolby
Laboratories, provides crystal clear sound
reproduction.
Screen
Both regular and widescreen(16:9) pictures can be
viewed.
Slow Motion
An importantscenecan be viewedinslow motion.
Programmed Play (CD)
Youcan programtracksto play indesiredorder.
Parental Control (DVD)
Tile parental control allows users to set the level
necessary to prohibit children from viewing harmful
movies such as those with violence_ adult subject
matter, etc.
Various
On-Screen
Menu Functions
You can select various languages (Audio/Subtitle)
and screen angles while enjoying movies.
EZ VIEW (DVD)
Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
Digital Photo Viewer (JPEG)
You can view Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by pressing
the REPEAT button.
MP3/WMA
This unit can play discs created from MP3/WMA
files.
Instant Replay (DVD)
This function is used to reptay the previous
10 seconds of a movie from the current position.
Instant Skip (DVD)
This functionskipsplaybackahead10 seconds.
DVD AUDIO
DVDAUDIOisa formatspecificallydesignedto
providethe highestpossibleaudiofidelitycapable
on DVD.
DVI (Digital Visual Interface)
DVI reduces picture noise by allowing a pure digital
video signal path from the player to your TV.
This DVD player is capable of playing the following types of discs with the corresponding
DVD-VIDEO
Single-sided 240 min.
Audio
5"
+
* Discs which cannot be played with this player.
• DVD-ROM
• DVD-RAM
• CD-ROM
• CDV
• CDt
VIDEO-CD
video due to Dolby Digital and
MPEG-2 system.
• Various screen and audio functions
Single-sided 80 min.
can be easily selected through the
Double-sided 160 min.
on-screen menu.
31/2"
Audio
5"
74 min.
31/2"
20 min.
5"
74 min.
31/2"
20 min.
+
Video
• DVD contains excellent sound and
Double-sided 480 min.
Video
VIDEO
Note
Iogos:
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
• CDGs play audio only, not graphics.
* Ability to play back may depend on recording
conditions.
• DVD-R, +R
• CD-RW
• DVD+RW, -RW
* The unit may not play certain CD-R, CD-RW and
DVD-R due to the disc type or recording
conditions.
AUDIO-CD
Audio
DIGITAL
AUDIO
DVD AUDIO
Audio
+
Video
400 min.
• DVD AUDIO is a format specifically
designed to provide the highest
possible audio fidelity capable on
DVD.
74 min.
• Super Audio CD is a high quality
audio format with higher sampling
rates and fuller, richer sound as
compared to regular CD.
AUDIO
COPY PROTECTION
SACD
Audio
5"
Many DVD discs are encoded with copy
protection. Because of this, you should only
connect your DVD player directly to your TV, not
to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected DVD
discs.
This product incorporatescopyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners.
Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
SACD (Super Audio CD)
Super Audio CD is a high quality audio format with
higher sampling rates and fuller_ richer sound as
compared to regular CD.
Play Region Number
Both the DVD player and the discs are coded by region
These regional codes must match in order for the disc to
play. if the codes do not match, the disc will not play.
NTSC broadcast system in U.SA, Canada,
Korea, Japan, etc.
The Region Number for this player is described on the
rear panel of the player.
Dolby Digital disc
Stereo disc
Digital Audio disc
DTS disc
MP3 disc
Super Audio CD disc
DVD AUDIO disc
Downloaded from www.Manualslib.com manuals search engine
• CD is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration of
audio quality over time.
6
7
7
COi_ ]AL
I
COMPONENTVlDEOOUT
)
r° °l
I
Front Panel Controls
2
1. STANDBY/ON ( O/I )
• When the unit is first plugged in, the red indicator
lights. When STANDBY/ON button is pressed on,
the blue light appears and the player is turned
on.
3
4
5
6
5. STOP ( • )
• Stops disc play.
Rear Panel
6. SKIP ( _ ) / SEARCH
• Use to reverse skip a scene or music.
2. DISC TRAY
• Place the disc here.
7. PLAY/PAUSE ( ,tt )
• Begin or pause disc play
3. OPEN/CLOSE ( A )
• Press to open and close the disc tray.
8. SKIP ( I_ ) / SEARCH
• Use to forward skip a scene or music
4. Display
• Operation indicators are displayed here.
1. DIGITAL AUDIO OUT JACKS
• Use an optical or coaxial digital cable to connect
to a compatible Dotby Digital receiver.
Use to connect to an A/V Amplifier that contains
a Dolby Digital or DTS decoder.
2.5.1CH ANALOG AUDIO OUT JACKS
• Connect to an amplifier with 5.1ch analog input
jacks.
3. MIXED AUDIO OUT JACKS
• Connect to the Audio input jacks of your
television, audio/video receiver.
4. VIDEO OUT JACK
• Use a video cable to connect to the Video input
jack on your television.
• The Video Output in Setup Menu must be set to
Component (t-SCAN) or S-Video.
5. S-VIDEO OUT JACK
Front Panel Disolav
1. Disc type indicators
2. Play / Pause / Forward play
3. Displays various messages concerning operations such as PLAY, STOE LOAD ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
Downloaded from www.Manualslib.com manuals search engine
• Use the S-Video cable to connect this jack to
the S-Video jack on your television for a higher
quality picture.
• The Video Output in Setup Menu must be set to
S-Video.
6. DVI OUT JACK
• Use the DVI cable to connect this jack to the DVI
jack on your television for the best quality picture.
• The Video Output in Setup Menu must be set to
Component (P-SCAN) & DVI.
7. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with
Component Video in jacks. These jacks provide
Pr, Pb and Y video.
• tf Component (P-SCAN) & DVt Video Output is
selected in Setup Menu_interlaced scan mode
and Video_ S-Video will not work.
• If Component (I-SCAN) Video Output is selected
in Setup Menu, progressive scan and DVI mode
wilI not work.
Important Note
• Consult your TV User's Manual to find out if your
TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User's Manual's
instructions regarding Progressive Scan settings in
the TV's menu system.
• If Component(P-SCAN) & DVl Video Output is
selected in Setup Menu, Video and S-Video wili
not work.
• See page 35 to get more information on how to
use the setup menu.
Thisremote
control
canalsocontrol
most
TVs.
Seepage38.
--
2
m
3
--
4
18
8. SEARCH Buttons (_N / 1_)
• Allow you to search forward/backward through a disc.
The following shows examples
and other components.
9. STOP Button ( • )
10. MENU Button
• Brings up the DVD player's menu.
1t. RETURN Button
• Returns to a previous menu.
Before Connectino
used to connect the DVD player with a TV
the DVD Player
• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
• If you connected an externat Audio System, turn on your Audio System and set it to the correct Audio Input.
19
12. ZOOM Button
--
20
• Refer to the owner's manual of the additional components you are connecting for more information on those
particular components.
21
22
• Enlarges DVD picture.
13. AUDIO Button
• Use this buttonto access various audio functionson a disc.
14. SUBTITLE Button
Connection to an Audio System
5
'°°°
---
6
--
--
23
7
'
--
24
8
--
• Use to skip the INDEX
16. SACD/CD Button
• Selects SACD or CD playback mode.
--'-
25
26
27
17. SHUTTLE DIAL (Search mode)
• Performs fast motion play
18.TV POWER button
• Turns the TV's power on or off
19. CLEAR Button
• Use to remove menus or status displays from the screen.
20. INSTANT SKIP Button
• This function skips playback ahead 10 seconds
21. INSTANT REPLAY Button
• This function is used to replay the previous 10
seconds of a movie from the current position.
9 -10,-oooooooooo
commonly
--
'-
=
of connections
11--
28
--
29
15. INDEX Buttons
12-13-14--
------------_-_-_-30
"
--31
--
32
22. CH A/V buttons
• Channel setection.
15,-o
16--
---
33
34
23. OPENtCLOSE (A.) Button
• To open and close the disc tray.
24. DVI SEE Button
• DVI Output resolution setup
17--
--
35
DVD Function Buttons
1. DVD POWER Button
• Turns the power on or off.
2. NUMBER Buttons
3. PROG Button
• Allows you to program a specific order
4. STEP Button
• Advances play one frame at a time.
5.VOL +1- Buttons
• Control volumes.
6. TV/VlDEO Button
• Press to display atl of the available video sources
( i.e., TV, Cable, Video)
7.VIDEO SEL. Button
• Selects Video output format.
2oh Amplifier
Audio
Input
Jacks
5.1ch Analog Amplifier
Dolby Digital Decoder
Audio Input Jacks
Digital Audio Input Jack
25. SKIP Buttons (1_ t I_ )
• Use to skip the title, chapter, or track
OR
26. PLAYtPAUSE Button (_'11)
• Begin/Pause disc play.
27. INFO Button
• Displays the current disc mode.
28. DISC MENU Button
• Brings up the Disc menu.
29. ENTERtDIRECTION Button
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch
30. EZ VIEW Button
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
31. ANGLE Button
• Use to access various camera angles on a DVD.
32. REPEAT Button
• Allows you to repeat play a title, chapter, track, or disc
33. PAGE Buttons
• Use to skip the PAGE.
34. BOOKMARK Button
35. JOG DIAL (Step mode)
• Operates frame by frame play. In CD mode, performs
track search
Downloaded from www.Manualslib.com manuals search engine
!
Mixed Audio Output Jaks
Analog Audio Output Jacks
(2 Channel)
(Multi Channel)
Digital Audio Output Jack
Note
• DVD-AUDIO only ptays back two channel audio through the Digital Audio out. Multi-channel DVD-Audio discs
are output through the Analog outputs.
• Super Audio CD plays back only through the Analog outputs. (See page 33)
Connection to a TV (For Video)
TV (Normal,Widescreen,Projection,etc..)
Connection to a TV (For Proqressive scan, Diqital Video)
Progressive scan
Basic Audio
Digital Video
Component Video Jacks
Mixed Audio
Output Jacks
Digital Video Out
PC Input
Mixed Audio
Output Jacks
1. Connect a cable with the desired method.
2. Turn on your TV and DVD Player.
3. Set your TV the correct video input by pressing TV/VlDEO button on. (See page 38)
4. Select the video output according to the cable connection.
If you use the VIDEO SEL. button, you can change easily video output in stop mode.
Method 1
DVD Player + TV with Video Input Jack
(The Video Output in Setup Menu must be set to S-Video or Component (I-SCAN).)
Method 1
DVD Player + TV with Component Video Jacks.
(The Video Output in Setup Menu must be set to Component (P-SCAN) & DVI.)
Method 2
DVD Player + TV with DVt Jack.
• Depending on your TV_your hookup for Method 2 may differ from the illustration.
(The Video Output in Setup Menu must be set to Component (P-SCAN) & DVI.)
Method 2
DVD Player + TV with S-Video input Jack
(The Video Output in Setup Menu must be set to S-Video.)
Method 3
DVD Player + TV with Component Video Jacks
(The Video Output in Setup Menu must be set to Component (I-SCAN).)
Note
• If you press the VIDEO SEL. button, Video output mode is changed in reguIar sequence in stop mode.
(S-Video -_ I-SCAN -_ P-SCAN & DVI)
Downloaded from www.Manualslib.com manuals search engine
Important Note
• Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual's instructions regarding Progressive Scan
settings in the TV's menu system.
• When the Video output is Progressive Scan, Video and S-Video will not work.
• If you want to convert Video Output to Progressive Scan & DVt, you have to first connect Component cable on
your TV. Then select Component (P-SCAN) & DVt Video Output in the Setup Menu. Then change the TV's
external input to Component (525p/480p) within 10 seconds. (See Page 35)
• Use the VIDEO SEL. button to easily change the video output in stop mode. (See page 12)
• Refer to your TV user's manual.
DVI VIDEO Specifications
Before Play
When you press the DVI SEL. button DVL 480p, 72@, 768p, 1080i are selected in order.
The first press of the DVI SEL button_brings up the current resolution.
The second press allows you to change the DVt output resolution.
* The specific resolution of DVI output may not work depending on your TM
• Turn on your TV and set it to the correct Video
Input by pressing TV/VIDEO button on the TV
remote control.
Important
Note
• DVt (Digital Visual Interface)
DVt is an interface to enable the digital transmission of video signals between various digital devices.
Using DVI, the DVD player transmits a digital video signal and displays a vivid picture on a TV having a DVI
jack.
• Description of the DVI connection
DVt-D connector : digital signal only.
DVN connector : digital and analog signal.
• Though the player uses a DVt-I cable, the player outputs only a pure digital signal to the TV.
• If TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears on the screen.
• Be careful that various connectors are similar to DVI connector, for example VESA PnD, VESA DFD and so on.
• Why does Samsung use DVt?
Analog TVs require an analog video signal. However_when playing a DVD_the data transmitted to a TV is
digital. Therefore either a digital-to-analog converter(in the dvd player) or an analog-to-digital converter (in the
TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss.
DVI technology is superior because it requires no D/A conversion and is a pure digital signal from the player to
your TV.
• What is the HDCP?
HDCP(High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via DVl
from being copied. It provides a secure digital link between a video source(PC, DVD.etc) and a display
device(TV, projector, etc). Content is encrypted at the source device to prevent unauthorized copies from being
made.
• If you connected an external Audio System, turn
on your Audio System and set it to the correct
Audio Input.
After ptugging in the player, the first time you press
the DVD POWER button_this screen comes up :
If you want to select a language_ press a
NUMBER button. (This screen will only appear
when you plug in the player for the first time.)
If the language for the startup screen is not set,
the settings may change whenever you turn the
power on or off. Therefore, make sure that you
select the language you want to use.
7. Step Motion Play
(Except CD/DVD-AUDIO/SACD)
Turn the Jog dial clockwise or press the STEP button on
the remote during play
- Each time the button is pressed or Jog Dial is turned, a
new frame will appear.
- No sound is heard during STEP mode.
- Press PLAY/PAUSE ( lbll ) button to resume normal
play.
-You can only perform step motion play in the forward
direction.
8. Stow Motion Play
(Except CD/DVD-AUDIO/SACD)
Press the FWD SEARCH (I,_) button on the remote
during PAUSE or STEP mode.
- By pressing the FWD SEARCH ( _ ) button, you can
select slow motion play for 1/8, 1/4 or 1/2 of normal
speed.
- No sound is heard during slow mode.
- Press PLAY/PAUSE ( I,,11) to resume normal play.
- Reverse slow motion play will not work.
RESUME function
Play
When you stop disc play, the player remembers
where you stopped, so when you press
PLAY/PAUSE ( I_11) button again, it will pick up
where you left off. (unless the disc is removed or the
player is unplugged, or if you press the STOP ( • )
button twice,)
1. Press the OPEN/CLOSE button.
PROGRESSIVE
SCAN OUTPUT
(525p)
"CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE, IN CASE OF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO THE
'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 525p DVD PLAYER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER."
The STANDBYindicatorlightgoes out andthetray
opens.
2. Place a disc gently into the tray with the disc's
label facing up.
3. Press the PLAY/PAUSE ( I_11) button or
OPEN/CLOSE button to close the disc tray.
4. Stopping Play
Pressthe STOP( • ) buttonduringplay.
5. Removing Disc
Pressthe OPEN/CLOSEbutton.
6. Pausing Play
Press the PLAY/PAUSE ( I_11) or STEP button on the
remote during play
- Screen stops, no sound.
- To resume, press the PLAY/PAUSE ( I_11) button once
again.
Downloaded from www.Manualslib.com manuals search engine
Note
• If the player is left for about 5 minutes in pause
mode, it will stop.
• If the player is left in the stop mode for more than
about 30 minutes_ the power will automatically shut
off. (Automatic Power-Off Function)
• If the player is left in the stop mode for more than
one minute without any user interaction, a screen
saver will be activated. Press the PLAY/PAUSE
( I,,11) button to resume normal play.
• This ('_ icon indicates an invalid button press.
During
play,
youcansearch
quickly
through
a
chapter
ortrack
orusetheskipfunction
to
jump
tothenextselection.
Searchinq throuqh a Chapter or Track
acoess
the
desired
tltte
when
there
,s
When Playinq a DVDNCD/CD
more than one in the disc.
1. During play, press the INFO button on the remote.
For example, if there is more than one
movie on a DVD, each movie will be
identified.
2. Use the UP/DOWN buttons to seIect the desired
item.
3. Use the LEFT/RIGHT buttons to make the
During play, press the SERACH (<_ or I_,,)
button and press again to search at a faster speed.
• Youcan also usethe Shuttledialon the remoteby
turning.(2X,4X_8X, 16X,32X,128X)
• tn case of SuperAudioCD, whentheclip menuis off,you
can use this function.(Seepage25)
ACD/DVD-AUDIO
Skippinq
During
desired setup and then press ENTER.
•You may use the number buttons of the remote
control to directly access a title, chapter or to
start the playback from the desired time.
Usinq
the Disc Menu
1. During the playback of a DVD disc, press the
MENU button on the remote.
2. Select Disc Menu using the UP/DOWN buttons
then press the RIGHT or ENTER button.
Most DVDsodiscs
are recorded
in find a
chapters
that you
can quickly
specific passage (similar to tracks on an
audio CD).
4. To make the screen disappear, press the INFO
button again.
;
4X,
2X, 8X
8X, 32X, 128X
2X, 4X, 8X
Allows playback of the fitm from a
desired time. You must enter the starting
time as a reference.
Refers to the language of the film
soundtrack, tn the example, the
soundtrack is played in English 5.1CR.
A DVD disc can have up to eight
different soundtracks.
Usina
the Title Menu
1. During the playback of a DVD disc, press the
MENU button on the remote.
Tracks
play, press the _
or _'1
Refers
tothe
subtit,e,anguages
button.
available in the disc.
You will be able to choose the subtitle
• When playing a DVD/DVD-AUDIO, if you press the
button, it moves to the next chapter. If you press the I_N
2. Select Title Menu using the UP/DOWN buttons
then press the RIGHT or ENTER button.
languages or, if you prefer, turn them off
from the screen.
button, it moves to the beginning of the chapter. One mere
press makes it move to the beginning of the previous
A DVD disc can have up to 32 different
subtitles.
chapter.
• When playing aVCD 2.0 in Menu Off mode, aVCD 1.1,
SACD or a CD, if you press the _ button, it moves to
the next track. If you press the 1<14button, it moves to the
beginning of the track. One more press makes it move to
Note
the beginning of the previous track
• When VCD 2.0 is in Menu Off mode only, this
function works. (See page 16)
• tf a track exceeds 15 minutes when #aying a VCD and
you press the _
button, it moves forward 5 minutes, in
menu off mode. If you press the 1<14button, it moves
backward 5 minutes.
Note
CD
• Depending on a disc, the Title and Disc Menus
may not work.
• Title Menu will only be displayed if there are at
least two titIes in the disc.
Note
• When playing a VCD 2.0, you can choose Menu
On or Menu Off by using the DtSC MENU
button.
Downloaded from www.Manualslib.com manuals search engine
• You can also use the Disc Menu, using the DISC
MENU button on the remote.
• In VCD 2.0, the DtSC MENU button is used to
select Menu On or Menu Off mode.
Usinq the Function
Menu
1. Press the MENU button during playback.
2. Use the UP/DOWN buttons to highlight Function,
then press the RIGHT or ENTER button.
3. Function selection screen appears: Info_Zoom,
Bookmark, Repeat and EZ View.
- tnfo(See Page16~17)
- Zoom(SeePage24)
- Bookmark(SeePage23)
- Repeat(See Page18)
- EZ View(See Page20)
Repeat the current track chapter, title, a
chosen section (A-B), or all of the disc,
Proqram Play (CD)
When
2. Use the LEFT/RIGHT buttons to select
PROGRAM. Press the ENTER button.
olavina
a DVD/VCD/CD
1. Press the REPEAT button on the remote.
Repeat screen appears.
2. Select Chapter, Title or A-B using the
LEFT/RIGHT buttons.
1. Press the PROG button.
3. Use the LEFT/RIGHT/UP/DOWN buttons to select
the first track to add to the program.
Press the ENTER button. The seIection numbers
appear in the Program Order box.
• Chapter ( _ ) : repeats the chapter that is playing
• Title (_-_) : repeats the title that is playing.
• A-B : repeats a segment of the disc that you select.
4. Press the PLAY/PAUSE ( I_,11
) button.
The disc will be played in programmed order.
* A-B REPEAT
4. Use the UP/DOWN button to highlight one of the
5 functions. Then press the RIGHT or ENTER
button to access the function.
This feature atIows you to slowly repeat
scenes containing sports, dancing, musical
instruments being played etc. so you can
study them more closely.
When playinq a DVD/VCD
1. During ptay_press the PLAY/PAUSE ( I_11)
button.
2. Press the FWD SEARCH ( _ ) button on the
remote during PAUSE or STEP mode.
3. Press the REPEAT button on the remote.
Repeat screen appears.
• Press ENTER at the point where you want the repeat
play to start (A).
• Press ENTER at the point where you want the repeat
play to stop (B).
• To terminate the function 3tess the 'CLEAR' button.
4. Select A-B using the LEFT/RIGHT buttons.
5. Press ENTER at the point where you want the
repeat play to start (A).
• A-BREPEATdoes not allowyou to setpoint (B)until at
least5 secondshas elapsedafterpoint (A)has been
set.
• A-B REPEAT does not allow you to set point (B) until at
least 5 seconds has elapsed after point (A) has been
set.
6. Press ENTER at the point where you want repeat
play to stop (B).
DVD
7. To return to normal play, press the CLEAR button
and then press the PLAY/PAUSE ( ,11) button.
VCD/CD
Random
Play (CD)
Note
1. Press the PROG button.
• You can also directly select these functions using
their respective buttons on the remote.
2. Use the LEFT/RiGHT buttons to select RANDOM.
Press the ENTER button.
3. Press ENTER.
4.To return to normal play, press REPEAT again,
then press the LEFT/RIGHT buttons to select Off
and press ENTER.
Note
Note
• Depending on a disc, the Program and Random
Play functions may not work.
• DVD repeats play by chapter or title_CD and VCD
repeat play by disc or track.
• This unit can support a maximum of 20
programmed tracks.
• Depending on a disc, the Repeat function may not
work.
• While in playback mode, press the CLEAR button
on the remote control to cancel Programmed Play
or Random Play.
• When VCD 2.0 is in Menu Off mode only, this function works. (See page 16)
Downloaded from www.Manualslib.com manuals search engine
Note
• The disc will play from A to B repeatedly at the
speed you chose.
• When VCD 2.0 is in Menu Off mode only, this function works. (See page 16)
To play back usinq aspect ratio (DVD)
Press the EZ ViEW button.
• The screen size changes when the button is
pressed repeatedly.
• The screen zoom mode operates differently
depending on a screen setting in the initiai setup
menu.
• To ensure correct operation of the EZ ViEW
button, you should set the correct aspect ratio in
the initial setup (See page 35).
If you are usinq a 4:3 TV
1. For 16:9 aspect ratio discs
• 4:3 Letter Box
Displays the content of the DVD titIe in 16:9
aspect ratio. The black bars will appear at the
top and bottom of the screen.
• 4:3 Pan Scan
The left and right of the screen are cut off and
displays the central portion of the 16:9 screen.
• Screen Fit
If you are usina a 16:9TV
1. For 16:9 aspect ratio discs
• Wide Screen
Displays tile content of the DVD title in 16:9
aspect ratio.
• Screen Fit
The top and bottom of the screen are cut off.
When playing a 2.35:1 aspect ratio disc, the
black bars at the top and bottom of the screen
will disappear. The picture will look vertically
stretched. (Depending on a type of disc, the
black bars may not disappear completely.)
• Zoom Fit
The top_bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
2. For 4:3 aspect ratio discs
• Normal Wide
Displays the content of the DVD title in 16;9
aspect ratio. The picture will look horizontati
stretched.
• Screen Fit
The top and bottom of the screen are cut off
and the full screen appears.
The picture wilt look vertically stretched.
The top and bottom of the screen are cut off
and the full screen appears.
The picture wilt look vertically stretched.
You can select a desired language quickly and
easily with the AUDIO button.
You can select a desired subtitle quickly and
easily with the SUBTITLE button.
Usinq
Usinq
the AUDIO button
1. Press the AUDIO button.
2. The Audio changes when the button is pressed
repeatedly.
- The audiolanguagesare representedbyabbreviations.
3. Press the AUDIO button to select Stereo, Right or
Left. (On VCD/CD)
the SUBTITLE
button
1. Press the SUBTITLE button.
-The subtitlelanguagesare representedby
abbreviations
2. The subtitIe changes when the button is pressed
repeatedly.
3. To turn off the display, press the CLEAR or
RETURN button.
DVD
• Zoom Fit
The top_ bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
2. For 4:3 aspect ratio discs
• Normal Screen
Displays the content of the DVD title in 4:3
aspect ratio.
VCD/CD
• Screen Fit
The top and bottom of the screen are cut off
and the full screen appears.
The picture would look vertically stretched.
Note
• This function depends on what languages are
encoded on the disc and may not work with all
DVDs.
• Zoom Fit
The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
• A DVD disc can contain up to 32 subtitle
languages.
Note
Note
• This function may behave differently depending on
a type of disc.
• This function depends on what languages are
encoded on the disc and may not work with all
DVDs.
• Zoom Fit
• A DVD disc can contain up to 8 audio languages.
The top_bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
• Vertical Fit
• How to have the same audio language come up
whenever you play a DVD;
Refer to 'Setting Up the Language Features" on
page 32.
When a 4:3 DVD is viewed on a 16;9 T_ btack
bars wilt appear at the left and right of the
screen in order to prevent the picture from
looking horizontally stretched.
Downloaded from www.Manualslib.com manuals search engine
• How to have the same subtitle language come
up whenever you play a DVD;
Refer to 'Setting Up the Language Features" on
page 32.
!i!i!i!i!i!i!i!i!i
¸! 1 i i! !! !i ! ! i ! ! ! i i!
When
aDVD
contains
muitiple
angles
ofa
particular
scene,
youcanusetheANGLE
function.
Usina the ANGLE button
If the disc contains multiple angles, tile ANGLE
mark appears on the screen.
1. Press the ANGLE button, then ANGLE icon will
appear with the current angle number and the
number of angles available.
Usinq the Instant Replay function (DVD)
If you miss a scene, you can see it again using
this function,
If you press the INSTANT REPLAY button, the
current scene moves backward about 10 seconds,
and plays back.
* Depending on a disc, the Instant Replay function may not
work.
This feature lets you bookmark sections of a
DVD or VCD (Menu Off mode) so you can
quickiy find them at a later time.
Usina the Bookmark
Function _DVD/VCD_
1. During play, press tile BOOKMARK button on the
remote.
2. Use the LEFT/RIGHT buttons to move to the
desired bookmark icon.
3. When you reach the scene you want to mark,
press the ENTER button. The icon will change to
a number (1, 2, or 3).
2. Press the ANGLE button repeatedly to the
desired angle.
3.To remove the ANGLE icon, press the CLEAR or
RETURN button.
!
Recallinq a Marked Scene
1. During play, press tile BOOKMARK button on the
remote.
2. Use the LEFT/RIGHT buttons to select a marked
scene.
3. Press the PLAY/PAUSE ( _.11
) buttons to skip to
the marked scene.
iiii_i!i
i
4. Press the BOOKMARK button to turn Off the
display.
Clearinq a Bookmark
Usinq the Instant Skip function
(DVD)
Use this function to skip playback about 10
seconds ahead of the current scene,
Press the INSTANT SKIP button.
Note
• If the disc has only one angle, this feature won't
work. Currently, very few discs have this feature.
- Playback will skip ahead 10 seconds.
- Depending on a disc, this function may not work
1. During play, press the BOOKMARK button on the
remote.
2. Use the LEFT/RIGHT buttons to select the
bookmark number you want to deIete.
3. Press the CLEAR button to delete a bookmark
number. Press the BOOKMARK button to turn Off
the display.
Note
• Up to three scenes may be marked at a time.
• When VCD 2.0 is in Menu Off mode only, this
function works. (See page 16)
• Depending on a disc, the Bookmark function may
not work.
Downloaded from www.Manualslib.com manuals search engine
! i!
!i!i!i!i!i!i!i!i!i!i!i_il
_I
i_i_iiiiiiiii!
i!_i_i_iiiiii_ilill
iiiiiiili_!_iiiiiiiiiiii!_i!iii_i_i_ii_ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!il
!ii!ii!ii!ii!ii!ii!ii!i
!ii!ii!ii!ii!ii!ii!ii!
!ii!ii!ii!ii!ii!ii!i
!ii!ii!ii!ii!ii!ii!
!ii!ii!ii!ii!ii!i
!ii!ii!ii!ii!ii!
!ii!ii!ii!ii!i
!ii!ii!ii!ii!
!ii!ii!ii!i
!ii!ii!ii!
!ii!iiiii
Usinq the Zoom Function (DVDNCD)
1. Open the disc tray.
1. During play or pause mode, press the ZOOM
button on the remote.
A Zoom mark will be displayed on screen.
2. Place the Super Audio CD disc on the tray.
- Place the Super Audio CD disc with the labeled
side up.
2. Use the UP/DOWN or LEFT/RIGHT buttons to
select the part of the screen you want to zoom in
3. Close the tray.
- The tray closes and you should get a screen
that looks like the one below.
on.
Super Audio CD Clips Menu Off Play Function
CD Layer Play Function
1. In Stop mode_press the DISC MENU button until
the Clips menu is off.
During Super Audio CD playback, press the
SACD/CD button to playback the CD layer of a dual
layer Super Audio CD disc. (Refer to the page 16 for
setting CD playback Function).
2. During playback, press the INFO button and the
screen below appears.
3. Use the UP/DOWN buttons to select the desired
item.
3. Press the ENTER button.
- During DVD play, press ENTER to zoom in
2XI4Xl2XINormat in order.
- During VCD play, press ENTER to zoom in 2X/Normal
in order.
To access the desired Track when there
is more than one in the disc.
4. Use the LEFT/RIGHT buttons to make the
Super Audio CD Clips Menu On Play Function
1. Use the UP/DOWN buttons to select a music title.
2. Press the ENTER button to begin playback of the
music title.
- If you want to use the Repeat Function, press the
REPEAT button to change the mode_such as Off,
Track_Disc.
*Off : Normal Playback
*Track : Repeats the current music title.
*Disc : Repeats the music titles in the Super
Audio CD.
- If you want to see information about the Disc title
and Artist, press the INFO button.
- If you want to convert into regular CD mode,
press the SACD/CD button.
- During play or stop mode, you can change the
2CH or MULTI mode by using LEFT/RIGHT
buttons. (You can use this function when Super
Audio CD disc includes multi channel and 2
channel audio format.)
Downloaded from www.Manualslib.com manuals search engine
desired setup and then press ENTER.
•You may use the number buttons of the remote
control to directly access a track and to start the
playback from the desired time.
Allows playback from a desired time.
You must enter the starting time as a
reference.
To access the desired Track when there
is more than one in the disc.
Note
Allows playback from a desired time by
using the number buttons.
If you want to change the 2channet or
multi channel play or stop mode, press
AUDIO button.
- You can use this function when Super
Audio CD disc includes multi channel
and 2 channel audio format.
• 2CH :L, R
• MULTI : F/L_ F/R_ R/L, R/R, C/T, S/W
5. To make the screen disappear_ press the INFO
button again.
• Some Super Audio CD discs do not include a CD
layer.
• Depending on a disc, this function may not work.
1.Open
thedisc
tray.
2.Place
theDVD
AUDIO
disc
onthetray.
-Place
theDVD
AUDIO
disc
with
thelabeled
side
up.
3.Close
thetray.
-The
tray
closes
and
disc
plays.
Most DVD AUDIO discs are recorded in
REPEAT Play
Discs with MP3/WMA/JPEG
Group_you can change Groups with this
Function.
1. Press the REPEAT button on the remote during
playback.
songs or pictures that can be organized into
folders as shown below, They are similar to
Note
* Bonus Group playback.
• Some DVD AUDIO discs have Bonus
groups, tf you want to play a Bonus
group_you must enter the Bonus
Group code. The code is usually on the
DVD AUDIO disc case.
Usinq the Display Function
1. During play, press the INFO button on the remote.
2. Use the UP/DOWN buttons to select the desired
item.
2. Select Title (_)_ Group (_)
LEFT/RIGHT button.
using the
3. Press ENTER.
contain individual
how you use your computer to put files into
different folders.
1. Open the disc tray.
2. Place the disc on the tray.
- Place the disc with the labeled side up.
ii!!!!¸,
3. Close the tray.
- The tray closes and you should get a screen
that looks like the one below.
To access the desired Trackwhen there is
more than one on the DVDAUDIO disc
3. Use the LEFT/RIGHT buttons to make the
desired setup and then press ENTER.
• You may use the number buttons of the remote
control to directly access a Group, Track, Page
or to start the playback from the desired time.
4. To make the screen disappear_press the INFO
button again.
_i:
If pages are includedwith
the icon.
DVD-AUDIO,
you can see this
To access the desired page_you can
use this Function.
,fas,,0e
show,s,oc,
uded
with
the
....................................
DVD-AUDIO, you can see this icon.
In this case you cannot use PAGE
PRE./NEXT buttons.
If a video zone is included with the
DVD-AUDIO, you can see this icon.
In this case you cannot use PAGE
PRE/NEXT buttons.
AUDIO Format Display
During DVD AUDIO playback_press the AUDIO
button to see AUDIO Format information.
• LPCM : Linear Pulse Code Modulation.
Not compressed Audio data format.
• PPCM : Packet Pulse Code Modulation.
Paqe, Index Function
Some DVD-AUDIO discs don't audio down-mixing
These discs always output 5.1ch analog audio
regardless of audio setup.
1. Use PAGE PRE./NEXT buttons to Skip the Page
when there is more than one in a group.
• Some DVD-AUDIO discs inctudea slide show. tn
the slide show mode, this function can not use.
• PAGE is still images.You can see the still
images when playback DVD-AUDtO disc.
2. Use iNDEX PRE./NEXT buttons to Skip the Index
when there is more than one in a track.
Note Depending on a disc, this function may not work.
Folders and Files in
and Peer Folders
Current Folder
Lossless compressed Audio data format.
Allows playback of the music from a
desired time by using the number buttons.
Note
Parent Folder, Current Folder
• []
: Name of currently playing file.
• []
: Current Playback Time.
•
: Current Playback Mode : There are 4
modes. They can be selected in order by
pressing the REPEAT button.
- Off : Normal Playback
- Track : Repeats the current track.
- Folder : Repeats the current folder.
- Random : Files in the disc will be played
in random order.
Note
Some DVD-AUDIO discs don't allow audio
down-mixing. These discs always output 5.1ch
analog audio regardless of audio setup.
i_i
: MP3 file icon.
• i_
: WMA file icon.
: JPEG file icon.
•
: Folder icon.
: Current Folder icon.
Downloaded from www.Manualslib.com manuals search engine
The folder can only be selected in the Stop
mode.
1. Open the disc tray.
2. Place the disc on the tray.
- Place the disc with the labeled side up.
• To select the Parent Folder
Press the RETURN button to go to parent folder,
or use the UP/DOWN buttons to select"..' and
press ENTER to go to the _arentfolder.
3. Close the tray.
- The tray closes and you should get a screen
that looks like the one below.
CD-R MP3NVMA discs
When you record MP3 or WMA files on CD-R,
please refer to the following.
• Your MP3 orWMA files should be ISO 9660 or JOLIET
format.
ISO 9660 format and Joliet MP3 or WiVlA files are
1. Select the desired folder. (See page 28 to select
the folder)
2. Use the UP/DOWNbuttons to select a Picture file in
clips menu and then press the ENTER button.You
should get a screen that looks like the one below
compatible with Micresoft's DOS and Windows, and with
Apple's Mac. This format is the most widely used.
• To select the Peer Folder
Use the LEFT/RIGHT buttons to highlight left
window. Use the UP/DOWN buttons to select the
desired folder, then press ENTER.
MP3/WMA
Play Function
1. Select the desired folder.
2. Use the UP/DOWN or LEFT/RIGHT buttons to
• To select the Sub-Folder
select a song file.
Use the LEFT/RIGHT buttons to highlight right
window. Use the UP/DOWN buttons to select the
3. Press ENTER to begin playback of the song file.
• When naming your MP3 orWMA files, do not exceed 8
characters, and enter ".rap3, .wma" as the file
extension.
General name format of: Tifie.mp3. or Tifie.wma
When composing your tifie, make sure that you use 8
characters or less, have no spaces in the name, and avoid
the use of special characters including: (.,/,\,=,+).
• Use the INFO button on the remote control to select
the menu you want to view and then press the ENTER
button.
desired folder, then press ENTER.
• Use a decompression transfer rate of at least 128
Kbps when recording MP3 files.
Sound quality with MP3 flies basically depends on the rate
of compression/decompression you choose. Getting CD
audio sound requires an analog/digital sampling rate, that
is conversion to MP3 format, of at least 128 Kbps and up
to 160 Kbps. However, choosing higher rates, like 192
Kbps or more, only rareIy give better sound quality.
Conversely, files with decompression rates below 128
• _
:::
i!iiiiii/_iiii_
_st
i
sob-Fo,]o,o
I
Repeat/Random
@ iiiiiiiiiiiiii!iiii
so.G
mLE,
playback
Press the REPEAT button to change playback
mode. There are 4 modes, such as Off, Track,
Folder and Random.
- Off : Normal Playback
- Track : Repeats the current song file.
- Folder : Repeats the song flies which have the
same extension in the current folder.
- Random : Song files which have the same
extension will be played in random
order.
* To resume normal play, press the CLEAR button.
• (_
: Each time the ENTER button is pressed, the
picture is enlarged up to 4X.
(Normal -_ 2X -_ 4X -_ 2X -_ Normal)
• _
: The unit enters slide show mode.
*Before beginning the Slide Show, the picture interval
must be set.
sampling rate, that is conversion to WMA format, of at
least 64Kbps and up to 192Kbps.
Conversely, files with decompression rates below 64Kbps
or over 192Kbps will not be played properly.
• Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected
to prevent illegal copying. These flies are of the following
types: Windows Media (registered trade mark of
Microsoft lnc) and SDMIT'_(registered trade mark of The
SDMt Foundation)You cannot copy such files.
TM
• _
: When this icon is selected and ENTER is
pressed, the pictures change automatically
with about a 6 second interval.
• Important: The above recommendations cannot be taken
as a guarantee that the DVD player will play MP3
• _
_
: The pictures change automatically with about
a 12 second interval.
recordings, or as an assurance of sound quality. You
should note that certain technologies and methods for
MP3 file recording on CD-Rs prevent optimal playback of
• _
_
: The pictures change automatically with about
a 18 second interval.
these files on your DVD player (degraded sound quality
and in some cases, inability of the player to read the files).
• This unit can play a maximum of 3000 flies and 300
folders per disc.
Downloaded from www.Manualslib.com manuals search engine
button.
•, [Ji_]
-1 : Each time the ENTER button is pressed, the
picture rotates 90 degrees clockwise.
• Use a decompression transfer rate of at least 64Kbps
_iiiiiiiii!_iii!ili_2rid
button.
• To see the previous 6 pictures, press the _
Kbps will not be played properly.
when recording WMA files.
Sound quality with WMA files basically depends on the
rate of compression/decompression you choose.
Getting CD audio sound requires an analog/digital
: Returns to the Album Screen.
• To see the next 6 pictures, press the _
*Depending on a file size, the amount of time between
each picture may be different from the manual.
*If you don't press any button, the slide show will start
automatically in about 10 seconds by default.
Note
• If no buttons on the remote control pressed for 10
seconds, the menu will disappear.
Press the tNFO button on the remote control to
display the menu again.
• Press the STOP button to return to the clips menu.
• When playing a Kodak Picture CD_the unit
displays the Photo directly_ not the clips menu.
CD-R JPEG Discs
The Setup menu Iets you customize your DVD
player by allowing you to select various
language preferences, set up a parental level,
even adjust the player to the type of television
screen you have.
Usina the Player Menu Lanauaae
1. With the unit in Stop mode, press the MENU
button on the remote. Select Setup using
UP/DOWN buttons, then press the RIGHT or
ENTER button.
• Only files with the ".jpg" and ".JPG" extensionscan
be played
O Language Setup : Setup of the Language.
• If the disc is not closed, it will take longer to start
playing and not all of the recorded files may be
played.
O Audio Setup : Setup of the Audio Options.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet
format can be played.
• The name of the JPEG file may not be longer than 8
characters and should contain no blankspaces or
special characters(. / = +).
• Only a consecutively written multisession disc can be
played. If there is a blank segment in the muttisession
disc, the disc can be played only up to the blank
segment.
If you set the player menu, disc menu, audio
and subtitle language in advance, they will
come up automatically every time you watch a
movie.
1. With tile unit in Stop mode, press tile MENU
button.
Usinq the Disc Menu Lanquaqe
This function changes the text language only on the
disc menu screens.
1.With the unit in Stop mode, press the MENU
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4. Select Disc Menu using UP/DOWN buttons, then
press the RIGHT or ENTER button.
O Display Setup : Setup of the Display Options.
Use to select which type of screen you want to
watch and several display options.
5. Use the UP/DOWN buttons to select the desired
language.
- Select'=Others"
if the languageyou want is not listed.
O Parental Setup : Setup of the Parental Level.
Allows users to set the level necessary to
prevent children from viewing unsuitable
movies such as those with violence, adult
subject matter, etc.
4. Select Player Menu using UP/DOWN buttons,
then press the RIGHT or ENTER button.
• A maximumof 3000 imagescan be stored on a single
CD.
• Kodak Picture CDs are recommended.
• When playing a Kodak Picture CD, only the JPEG
files in the picturesfolder can be played.
6. Press the ENTER button.
• Kodak Picture CD : The JPEG files in the pictures
folder can be played automatically.
• KonicaPicture CD : If you want to see the Picture_
select the JPEG files in the clips menu
• Fuji Picture CD : If you want to see the Picture, select
the JPEG files in the clips menu
• QSS Picture CD : The unit cannot play QSS Picture
CD.
• If the number of files in 1 Disc is over 3000, only 3000
JPEG files can be played.
5. Use the UP/DOWN buttons to select the desired
language.
2. Use the UP/DOWN buttons on the remote to
access the different features.
3. Press the ENTER or RIGHT button to access the
sub features.
To make the setup screen disappear after setting
up, press the MENU button again.
• If the number of folders in 1 Disc is over 300, only
JPEG files in 300 folders can be played.
Note
Depending on a disc_some Setup Menu selections
may not work.
Downloaded from www.Manualslib.com manuals search engine
6. Press the ENTER button.
-The language is selected and the screen returns to
Language Setup menu
- To make the SETUP menu disappear, press the
RETURN or LEFT button.
-The language is selected and the screen returns to
Language Setup menu
Usinq the Audio Lanquaqe
Usinq the Subtitle Lanquaqe
1. With the unit in Stop mode, press the MENU button.
1.With the unit in Stop mode, press the MENU
button.
1.With the unit in Stop mode, press the MENU
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
2. Select Setup using UP/DOWN button& then
press the RIGHT or ENTER button.
3. Select Audio Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
button& then press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons_then press the RIGHT or ENTER button.
I_1 Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
4. Select Audio using UP/DOWN buttons, then
press the RIGHT or ENTER button.
4. Select Subtitle using UP/DOWN buttons, then
press the RIGHT or ENTER button.
O PCM Down Sampling
5. Use the UP/DOWN
5. Use the UP/DOWN
buttons to select the desired
language.
- Select "Automatic" if you want the subtitle language to
language to be the originaI language the disc is
recorded in.
be the same as the language selected as the audio
preference
- Select "Others" if the language you want is not listed.
- Select "Others" if the language you want is not listed.
Some discs may not contain the language you select
as your initial language; in that case the disc will use its
original language setting.
Note There is no analog audio output when you play
DTS sound disc
1. On : Select this when the amplifier connected to the
player is not 96KHz compatible, tn this case, the
96KHz signals will be down converted to 48KHZ.
buttons to select the desired
language.
- Select "Original" if you want the default soundtrack
O DTS
1. Off : Doesn't output digital signal.
2. On : Outputs DTS Bitstream via digital output only
Select DTS when connecting to a DTS Decoder.
2. Off : Select this when the amplifier connected to the
player is 96KHz compatible. In this case, all
signals witl be output without any changes.
4. Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
Speaker Setup (See page 34)
Note
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
• Manufactured under license from Dolby
Laboratories.' Doiby" and the doubte-D symbol are
trademarks of Dolby Laboratories.
6. Press the ENTER button.
I_t Digital Output
- The language is selected and the screen returns to
Language Setup menu.
6. Press the ENTER button.
- The language is selected and the screen returns to
Language Setup menu.
Note
• If the selected language is not recorded on the
disc, the original pre-recorded language is
selected.
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
Downloaded from www.Manualslib.com manuals search engine
1 PCM : Converts to PCM(2CH) 48kHz audio. Select
PCM when using the Analog Audio Outputs.
2 Bitstream : Converts to Dotby Digital Bitstream
(5.1CH). Select Bitstream when using the
Digital Audio Output
Note
Even when PCM Down sampling is Off
• Some discs will only output down sampIed
audio through the digital outputs.
• High sampling rate DVD-Audio discs
(192KHz or 176 4KHz) always output audio
down sampled to 96KHz or 88.2KHz through
the digital outputs.
• When playing LPCM or PPCM DVD
protected by copyright. If digital audio source
is 48KHz/16bit the Digital output is mute.
• "DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, inc.
• DVD-AUDIO
- Outputs 2 channel digital audio only.
- Some DVD-AUDIO discs do not downmix, so they
wilt not output 2 channel digital audio.
- MULTI channel DVD-AUDtO discs play back
through the analog outputs.
• Super Audio CD
Outputs analog signals only.
1.With
theunit
inStop
mode,
press
theMENU
button.
2.Select
Setup
using
UP/DOWN
buttons,
then
press
theRIGHT
orENTER
button.
3.Select
Audio
Setup
using
UP/DOWN
button&
then
press
theRIGHT
orENTER
button.
The
default
settings
:FRONT
L,R(Small),
CENTER
(Small),
SURROUND
(Small).
Select
thesize
ofthe
speakers
tobeconnected.
•Front (FL, FR)
- Large: Normally select this.
- Small: When the sound distorts or the surround
sound effects are difficult to hear, select this.
This activates the Doiby Digital bass redirection
circuitry and outputs the bass frequencies of the
speaker from the subwoofer.
1. With the unit in Stop mode, press the MENU button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Display Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4.Use
theUP/DOWN
buttons
toseIect
Speaker
Setup.
Then
press
theRIGHT
orENTER
button.
• Surround (SL, SR)
- None: If you do not connect a center speaker_
select this.
O Black Level
Adjusts the brightness of the screen.(On/Off)
I_ Video Output
Select Video Output.
1. S-Video : Select when you want to use Video and
S-Video Out.
2. Component (I-SCAN) : Select when you want to use
Video and Component 525i(Intedace) Out
• Center
- None: If you do not connect a center speaker,
select this.
- Large: Normally select this.
- Small: When the sound distorts, select this.
This activates the Dolby Digital bass redirection
circuitry and outputs the bass frequencies of the
center speaker from other speakers.
I_ Screen Messages
Use to turn on-screen messages On or Off.
3. Component (P-SCAN) & DVt : Select when you want
to use Component 525p(Progressive) Out or DVI.
* if you press the VIDEO SEL button, Video output
mode is changed in regular sequence in stop mode.
(S-Video -_ I-SCAN -_ P-SCAN & DVI)
4. Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
* if the Yes/No selection in the Display Setup sub Menu
is not made within 10 seconds, the screen returns to
the previous menu.
/iiiiiiiiiii_
- Large (Rear/Side): NormaIly select either of these
according to the rear speaker's position.
- Small (Rear/Side): When the sound distorts or the
surround sound effects are difficult to hear, select
either of these according to the rear speaker's
position. This activates the Dolby Digital bass
redirection circuitry and outputs the bass
frequencies of the rear speaker from other
speakers.
5.Use
theUP/DOWN
orLEFT/RIGHT
buttons
to
select
thedesired
item.
Then
press
theENTER
button.
Setting up TEST
The test output signals come clockwise starting from
the Front Speaker(L). Adjust Channel Balance to
match to the volume of test signals memorized in
the system.
FRONT(L) -_ CENTER -_ SUBWOOFER -_
FRONT(R) -_ SURROUND(R) -_ SURROUND(L)
O TV Aspect
Depending on the type of television you have, you may
want to adjust the screen setting (aspect ratio)
1 4:3 Letter Box : Select when you want to see the total
16:9 ratio screen DVD supplies, even though you have
a TV with a 4:3 ratio screen. Black bars will appear at
the top and bottom of the screen
2 4:3 Pan Scan : Select this for conventional size TVs
when you want to see the central portion of the 16:9
screen (Extreme left and right side of movie picture
will be cut off.)
!_1 DVI Output
This function corrects a biased TV screen to secure a
normal view.
3 16:9 Wide :You can view the full 16:9 picture on your
widescreen TV.
Note
How to make the SETUP menu disappear or return
to menu screen during set up. Press RETURN or
LEFT button.
Important Note
t_l Still Mode
These options will help prevent picture shake in still
mode and display small text clearer.
• The subwoofer test output signal is lower than the
other speakers.
1 Auto : When selecting Auto, Field/Frame mode will be
automatically converted.
• The MPEG Multichannel logo is a trademark
registered by PHtLIPS Corporation.
2 Field : Select this feature when the screen shakes in
the Auto mode.
• tf you set Front (L, R)"Small", LFE(Subwoofer)is
set "On" automatically.
Downloaded from www.Manualslib.com manuals search engine
3 Frame : Select this feature when you want to see
small letters more cleady in the Auto mode.
• Consult your TV User's Manual to find out if your
TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User's Manual's
instructions regarding Progressive Scan settings in
the TV's menu system.
• tf the screen is blocked by setting the wrong Video
Output, see page 39.
TheParental
Control
function
works
inconjunction
withDVDs
thathave
been
assigned
arating
which
helps
you
control
thetypes
ofDVDs
that
your
family
watches.
There
areupto8rating
levels
onadisc.
1.With
theunit
inStop
mode,
press
theMENU
5.Enter
your
password.
TheRe-enter
Password
button.
screen
appears
toconfirm
thepassword.
Enter
your
password
again.
2.Select
Setup
using
UP/DOWN
buttons,
then
Theplayer
islocked
(t_).
press
theRIGHT
orENTER
button.
3.Select
Parental
Setup
using
UP/DOWN
buttons,
then
press
theRIGHT
orENTER
button.
i!iiiiii
4. Use RIGHT or ENTER to select Yes if you want
to use a password. The Enter Password screen
appears.
Settinq Up the Ratinq Level
1. With the unit in Stop mode, press the MENU
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
The player is locked (t_).
6. Select the Rating Level you want using
UP/DOWN buttons.
For exampte, if you select up to Level 6, discs that
contain Level 7, 8 will not play.
-To cancelthe RatingLevel,select No usingRIGHTor
ENTERin UsePassword.
e.g) Setting up in LEVEL6.
3. Select Parental Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4. Enter your password.
The Parental Setup screen appears.
About
the Change
Password
- Highlight Change Password using UP/DOWN buttons
- Press ENTER button
The Change Password screen appears.
- Enter your new password Enter the new password again.
Note
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
• If you have forgotten your password, see page 40.
5. Select Rating Level using UP/DOWN buttons,
and press ENTER or RIGHT button.
Downloaded from www.Manualslib.com manuals search engine
The remote can also be set up to control most TVs. To program the remote, use the
code that corresponds to your brand.
Before
requesting
service
(troubieshooting),
please
check
the following.
TV Codes
Problem
BRAND
ANAM
AIWA
CODE
10, 11, 12, 13, 14, 15, 16, 17, 18
82
BANG&OLUFSEN 57
BLAUPUNKT
71
BRANDT
73
BRIONVEGA
CGE
57
52
DAEWOO
FORMENTI
FUJITSU
GRADIENTE
GRUNDIG
HITACHI
IMPERIAL
JVC
LG
LOEWE
LOEWE OPTA
MAGNAVOX
METZ
MITSUBISHI
MIVAR
NEC
NEWSAN
NOBLEX
30,31,
64
73
NORDMENDE
NOKIA
72, 73
74
53, 54, 74, 75
06, 55, 56, 57
06, 56, 57
PIONEER
RADtOLA
19, 20, 23, 24, 25, 26, 27, 28, 29,
32, 33, 34
06, 49, 57
57
84
7O
49, 52, 71
60, 72, 73, 75
52
61, 79
06, 19, 20, 21, 22, 78
06, 69
06, 57
4O
57
06, 48, 62, 65
52, 77
83
68
66
1.Turn on the TV.
58, 59, 73, 74, 75
06, 56
RADIOMARELLI 57
RCA
45, 46
REX
74
SABA
SALORA
SAMSUNG
01, 02, 03, 04, 05, 06, 07, 08, 09
41,42, 43, 44, 48
O6
SANYO
SCHNEIDER
SELECO
SHARP
Page
SIEMENS
SINGER
SINUDYNE
SONY
TELEAVA
TELEFUNKEN
THOMSON
THOMSON ASIA
• Check the batteries in the remote. They may need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it
ReinstaII batteries and try to operate the remote again
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
51 channel sound is not
being reproduced,
• 5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the "DoIby 5.1 ch" mark
on the outside
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
The _) icon appears on
screen.
74
P5
P7
Pll
P33
• The features or action cannot be completed at this time because:
1. The DVD's software restricts it
2. The DVDs software doesn't support the feature (e.g.,angles).
3. The feature is not available at the moment.
36, 37, 38, 39, 48
71
57
57
Disc Menu doesn't appear
• Check if the disc has a Menu
35, 48
73
Playmode differs from the
Setup Menu selection,
• Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
67, 73, 75, 76
72, 73, 75
80, 81
The screen ratio cannot
be changed
P15
4. You've requested a title or chapter number or search time that is
out of range.
P30~37
• The Screen Ratio is fixed on your DVDs.
P35
TOSHIBA
WEGA
47, 48, 49, 50, 51, 52
57
No audio.
• Make sure you have selected the correct Digital Output in the Audio
Options Menu.
P33
YOKO
ZENITH
06
63
The screen is blocked
• Press power on from a cold start with no disc in the unit.
Press the I_1_1
button on the front panel for 5 seconds.
The SELECT MENU LANGUAGE display will appear.
Select the number button of the desired language
4. If the TV turns off, setup is complete.
Enter other codes of the same brand if the first
code does not work.
3. While holding the TV POWER button down, enter
the code for your brand.
5. To operate the TV, use the "TV Function Buttons"
described on page 10.
Important
While holding down the TV POWER button,
enter 0 and then 1.
No operations can be
performed with the remote.
57, 72, 73, 74, 75
74
2. Point the DVD's remote at the TM
e.g} For Samsung 2 TVs
Action
CODE
PANASONIC
PHILPS
PHONOLA
CONTINENTAL
EDISON 75
EMERSON
FERGUSON
FINLUX
BRAND
Note
• The remote may not be able to control every
model TV of the brands listed.
• If you replace the remote control's batteries, set
the brand code again.
Downloaded from www.Manualslib.com manuals search engine
Forgot password
If you experience other
problems,
• Press power on from a cold start with no disc in the unit.
Press the I_,,I button on the front panel for 5 seconds.
The SELECT MENU LANGUAGE display will appear. Select the
number button of the desired language. Press the MENU button,
and then press DOWN button to select Setup, then press RIGHT or
ENTER. Press Up or Down to select Parental Setup The Parental
Setup is now unlocked as indicated on the display.
You can change your password.
• Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
P35
P36~37
Power Requirements
Power Consumption
Problem
Action
Page
Weight
General
No DVIoutput.
• ChecktheVideooutputis DVIenabled.
• Checkthe connectionbetweenthe TV andthe DVI
jackof DVDplayer.
• See ifthe TV supportsthis 480p1720p/768p/1080i
DVDplayer.
Dimensions
....
P13~14
• If snownoiseappearson the screen,it means
thatTV doesnot supportHDCP(High-bandwidthDigitalcontent
protection).
Operating Humidity Range
(DIGITAL VERSATILE DISC)
P14
CD : 5"
Disc
14 W
4.63 Ibs
W 16.93 in x D 9.84 in x H 1.93 in
.........
t4!J.t°.tt5?
...............................................................
DVD
AbnormalDVIoutput
screen,
AC 120V ~ 60Hz
(COMPACT DISC)
CD : 31/2"
(COMPACT DISC)
VCD : 5"
Composite Video
10 % to 75 %
Reading Speed : 11.45 ~ 15.09 ft/sec.
Approx. Play Time
(Single Sided, Singte Layer Disc) : 135 rain.
Reading Speed : 15.75 ~ 18.37 ft/sec.
Maximum Play Time : 74 min.
Reading Speed • 15.75 ~ 18.37 ft/sec.
Maximum Play Time : 20 min.
Reading Speed • 15.75 ~ 18.37 ft/sec.
Maximum Play Time : 74 min. (Video + Audio)
1 channel : 1.0 Vp-p (75 f_ load)
Y : 1.OVp-p (75 _ load)
Video
Component Video
Pr : 0.70 Vp-p (75 _ load)
Pb : 0.70 Vp-p (75 [_ load)
Output
S-VIDEO
DVI
2 Channel
Luminance Signal " 1.0 Vp-p (75 £_load)
Chrominance Signal : 0.286 Vp-p (75 f_ load)
Digital Visual Interface
L(I/L)_ R(2/R)
..............................................................
5.1 Channel
F)[i" Fi'l_i"R'/'L',"
"l_i'l_i"C'iI:_"
"S)'W.....................................................
48 kHz Sampling : 4 Hz to 22 kHz
Audio
•Frequency Response
Output
•S/N Ratio
110 dB
•Dynamic Range
100 dB
•Total Harmonic Distortion
96 kHz Sampling : 4 Rz to 44 kHz
0.004 %
•: Nominal specification
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
Downloaded from www.Manualslib.com manuals search engine
Warranty
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, tNC.
(SAMSUNG) and delivered new_in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for the following limited warranty period:
One (1)Year Parts and Labor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used
in the United States, and does not include transportation, installation_ removal or reinstatiation. Warranty repairs
must be performed by SAMSUNG's authorized service center. To receive warranty service, the original dated bill
of sate must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service
center. Transportation to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if
found to be defective during the limited warranty period specified above. The product must be returned during
the warranty period with transportation charges prepaid to SAMSUNG's designated service center. Prior to
returning any product for warranty service, the purchaser must contact SAMSUNG for problem determination
and service procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.
Replacement parts and products assume the remaining original warranty_or ninety (90) days, whichever is
longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal_ noncommercial use of this product and shall not apply to the following, including, but not limited to: damage which
occurs in shipment; applications and uses for which this product was not intended; failures or problems which
are caused by products or equipment not supplied by SAMSUNGI accidents, misuse, abuse_negtecL misapplication, fire, water, lightning or other acts of naturel incorrect electrical line vottage_fluctuations or surges; damage caused by improper or faulty installationl improper connection with any peripherall product alteration or modification; improper or unauthorized repaiq cosmetic damage or exterior finishl product with altered serial numbers; failure to follow operating instructions, customer adjustments, maintenance and environmental instructions
that are covered and prescribed in the instruction book; use of non-SAMSUNG or unauthorized parts, supplies,
accessories or equipment which damage this product or result in service problems; failures or problems due to
incompatibility with other equipment.
Downloaded from www.Manualslib.com manuals search engine
ELECTRONICS
HEADQUARTERS
105 Challenger Road
Ridgefield Park, NJ 07660-0511
TEL: 1-800-SAMSUNG
SERVICE DIVISION
400 Valley Road, Suite 20t
Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
www.samsungusa.com
AK68-00342P(02)
Downloaded from www.Manualslib.com manuals search engine
Download PDF
Similar pages