Philips Monitoring IntelliVue Series_2017.04_EN.indd

MOUNTING REFERENCE GUIDE
PHILIPS MONITORING
INTELLIVUE SERIES
CIM Cable Integrated Mounting System
CONTENT
General notes
3
How to create part numbers
4
Product highlights
6
Support arm pivot
7
Extended pivot arm
9
Height adjustable arm
11
Extended height adjustable arm
13
High position height adjustable arm
15
Extended high position height adjustable arm
17
Counter top
19
Cart light duty
21
Support arm pivot for FMS
23
Extended pivot arm for FMS
25
Down post for IntelliVue FMS
27
Mount for MP2/ X2
28
Support arm pivot for MP2/ X2
29
Extended pivot arm for MP2/ X2
31
Fixings
33
Fixings for anaesthesia machines
34
www.cim-med.com
-2-
GENERAL NOTES
Monitor Adaptations
All mounting systems for Philips IntelliVue series are prepared to accept the Philips Table Top Mount.
Mounting solutions for MP 80/ 90 are shown in the catalogue “VESA 75/ 100 adaptation”.
Mounting solutions for the Sure Signs/ Vital Signs are shown in the catalogue “5“ plunge plate adaptation”.
Please note!
The Philips Table Top Mount must be ordered separately by Philips.
Components’ grounding
All arms with integrated cable management are equipped with components grounding. No grounding is required for ams with
external or semi-integrated cable management with cables not being lead through joints.
Load capacity
All height adjustable arms have a load capacity of 22 kg/ 48.5 lbs. Rear mounted monitor adaptations and horizontally mounted
5“ plunge plates accept a maximum monitor weight of 18 kg/ 39.7 lbs. Additional 4 kg/ 8.8 lbs may be mounted on a down-post
underneath the front swivel part. Depending on material and tensile factor all weight indications have a 4-fold and/ or 6-fold safety
factor according to EN 60601-1, 3rd Edition regulations.
Custom-designed solutions and MRI applications
Please contact us for custom-designed solutions.
Product marking
All CIM products are CE marked. As medical product risk class 1 they are conform with the regulations MDD 93/42 ECC and
EN 60601-1, 3rd Edition. TUEV reports for numerous products especially for anaesthesia applications guarantee electrical and
mechanical safety of our products.
www.cim-med.com
-3-
HOW TO CREATE PART NUMBERS
Part numbers can be easily created by following the steps below:
Please replace the letters in green with the part no. code as per your requirements.
1.
Components’ grounding:
A
2.
3.
=
grounded
224PH/ 230PH
=
pivot arm, Philips interface
H33030PH
=
extended pivot arm, Philips interface
431PH
=
height adjustable arm, Philips interface
73130PH
=
extended height adjustable arm, Philips interface
531PH
=
high position height adjustable arm, Philips interface
83130PH
=
extended high position height adjustable arm, Philips interface
224FMS/ 230FMS
=
pivot arm, FMS interface
H33030FMS
=
extended pivot arm, FMS interface
224MP2/ 230MP2
=
pivot arm, MP2/ X2 interface
224MP2PS/ 230MP2PS
=
pivot arm, MP2/ X2 interface with power supply enclosure
33030MP2
=
extended pivot arm, MP2/ X2 interface
33030MP2PS
=
extended pivot arm, MP2/ X2 interface with power supply enclosure
Choose the arm version required:
Specify where you want to mount the arm and select the fixing (Y):
1V
=
pole ø 23 - 40 mm/ 0.9 - 1.6”
1
=
pole ø 25 mm/ 1.0”
1F
=
pole ø 35 mm/ 1.4”
1C
=
pole ø 38 mm/ 1.5”
2F
=
horizontal rails 10 x 25, 10 x 30 mm
3
=
vertical rail
3DR
=
dual vertical rails, distance 150 mm/ 5.9”
3TX
=
dual vertical rails, distance 225 mm/ 8.9”
4V
=
vertical wall channel
4U
=
vertical wall channel for arms with high mounting position
=
anaestesia machine with existing GCX channel
www.cim-med.com
-4-
HOW TO CREATE PART NUMBERS
4.
5.
6.
8
=
lateral adapter to Trumpf klinoPORT ceiling pendant
82
=
adapter to Trumpf klinoPORT frontal
9
=
Heinen & Löwenstein anaestesia machine
10
=
Maquet FLOW i anaesthesia machine
Choose the colour requested for decorative parts (C):
gr
=
RAL 7024 (dark grey)
bl
=
RAL 5013 (blue)
Choose the colour requested for the aluminium die-cast parts (D):
1
=
RAL 9016 (pure white)
2
=
RAL 9002 (grey white)
Specify the spring depending on the weight of your monitor/ device - only with height adjustable arms (X):
80
=
3 - 8 kg/ 6.6 - 17.6 lbs
95
=
5 - 11 kg/ 11 - 24.3 lbs
130
=
9 - 14 kg/ 19.8 - 30.9 lbs
175
=
13 - 17 kg/ 28.7 - 37.5 lbs
220
=
16 - 22 kg/ 35.3 - 48.5 lbs
EXAMPLE
1
2
3
4&5
6
Grounding
Arm version
Fixing
Colour
Spring tension
A
-
431PH
-
Y
.
CD
_
X
A
-
431PH
-
4V
.
gr1
_
80
www.cim-med.com
-5-
PRODUCT HIGHLIGHTS
Non-height adjustable arm
Pivot and extended pivot arms offer full cable integration and easy cleaning for infection control in all critical care areas in the
clinical environment. Our 5-years warranty guarantees reliable, trouble-free and maintenance-free operation. The swivel function at
the fixing point as well as the tilt/ swivel function of the monitor adaptation offers optimum positioning of your device. The extended
pivot arm is a two-part arm with central pivot point between the two arm sections. All bottom-mounted monitors have the safety
feature of a 20° tilt stop.
Height adjustable arm
The height adjustable arm offers full cable integration, one-wipe clean surfaces and our 5-year warranty on the entirety of the
product. Vertically and horizontally adjustable the arm offers optimal positioning of your device. A constant viewing angle when
vertically adjusted is guaranteed by a parallel linkage. Weight-optimized springs counter-balance the monitor without making
any adjustments. All bottom-mounted monitors have the safety feature of a 20° tilt stop. Individual rotational stops may be
integrated in any joint.
To provide the perfect combination of arm and monitor, the CIM articulated height adjustable arm has a simply
SAFETY
quarter-turn lock to hold the arm safely in position when removing the monitor. Furthermore the arm is equipped
with the unique safety feature of a slow-release gas spring. Should anybody try to remove the monitor before
locking the arm in position, our arm will only rise at a slow and even tempo.
www.cim-med.com
-6-
SUPPORT ARM PIVOT
Monitor adaption
prepared to accept Philips Table Top Mount
Colours to choose
decorative parts: RAL 5013 blue / RAL 7024 dark grey
aluminum parts: RAL 9016 pure white / RAL 9002 grey white
Max. load capacity support arm
18 kg/ 39.7 lbs
Max. load monitor adaptation
18 kg/ 39.7 lbs
Product weight
240 mm/ 9.5”: 1.8 kg/ 4.0 lbs; 300 mm/ 11.8”: 1.9 kg/ 4.2 lbs
Part number
A-224PH-Y.CD
arm length 240 mm/ 9.5”
A-230PH-Y.CD
arm length 300 mm/ 11.8”
Fixings
Y
4V
2F
Fixed rail clamp
Adapter for
vertical wall channel
10
Adapter for Maquet
anaesthesia machines
www.cim-med.com
/ details page 33 and 34
Vertical
rail clamp
9
Adapter for
Heinen & Löwenstein
anaesthesia machines
3
3DR
3TX
Dual vertical
rail clamp
1
1F
1C
1V
Fixed / universal
pole clamp
8
82
Lateral adapter
Trumpf
4U
Adapter for
anaesthesia machines
with existing side channel
-7-
SUPPORT ARM PIVOT
Technical data - arm length 300 mm/ 11.8”
Side view
16°
20°
16°
20°
229 mm / 9.0"
363 mm / 14.3"
229 mm / 9.0"
363 mm / 14.3"
Top view
10
5°
11
5°
10
5°
°
5
10
11
5°
5°
10
www.cim-med.com
5°
11
5°
11
-8-
EXTENDED PIVOT ARM
Monitor adaption
prepared to accept Philips Table Top Mount
Colours to choose
decorative parts: RAL 5013 blue / RAL 7024 dark grey
aluminum parts: RAL 9016 pure white / RAL 9002 grey white
Max. load capacity support arm
18 kg/ 39.7 lbs
Max. load monitor adaptation
18 kg/ 39.7 lbs
Product weight
2.85 kg/ 6.3 lbs
Part number
A-H33030PH-Y.CD
Fixings
Y
4V
2F
Fixed rail clamp
Adapter for
vertical wall channel
10
Adapter for Maquet
anaesthesia machines
www.cim-med.com
/ details page 33 and 34
Vertical
rail clamp
9
Adapter for
Heinen & Löwenstein
anaesthesia machines
3
3DR
3TX
Dual vertical
rail clamp
1
1F
1C
1V
Fixed / universal
pole clamp
8
82
Lateral adapter
Trumpf
4U
Adapter for
anaesthesia machines
with existing side channel
-9-
EXTENDED PIVOT ARM
Technical data
Side view
230 mm / 9.1"
16°
20°
16°
20°
229 mm / 9.0"
594 mm / 23.9"
230 mm / 9.1"
229 mm / 9.0"
594 mm / 23.9"
Top view
11
5°
90
°
11
5°
90
°
www.cim-med.com
°
90
± 180°
5°
11
°
90
± 180°
5°
11
- 10 -
HEIGHT ADJUSTABLE ARM
Monitor adaption
prepared to accept Philips Table Top Mount
Height adjustment
slow-flowing spring, parallel linkage for a constant viewing angle
Colours to choose
decorative parts: RAL 5013 blue / RAL 7024 dark grey
aluminum parts: RAL 9016 pure white / RAL 9002 grey white
Max. load capacity support arm
22 kg/ 48.5 lbs
Max. load monitor adaptation
22 kg/ 48.5 lbs
Product weight
3.5 kg/ 7.7 lbs
Balancing range
800 N (3 - 8 kg/ 6.6 - 17.6 lbs); 950 N (5 - 11 kg/ 11 - 24.3 lbs); 1300 N (9 - 14 kg/ 19.8 - 30.9 lbs);
1750 N (13 - 17 kg/ 28.7 - 37.5 lbs); 2200 N (16 - 22 kg/ 35.3 - 48.5 lbs)
Part number
A-431PH-Y.CD_X
Fixings
Y
4V
2F
Fixed rail clamp
Adapter for
vertical wall channel
10
Adapter for Maquet
anaesthesia machines
www.cim-med.com
/ details page 33 and 34
Vertical
rail clamp
9
Adapter for
Heinen & Löwenstein
anaesthesia machines
3
3DR
3TX
Dual vertical
rail clamp
1
1F
1C
1V
Fixed / universal
pole clamp
8
82
Lateral adapter
Trumpf
4U
Adapter for
anaesthesia machines
with existing side channel
- 11 -
HEIGHT ADJUSTABLE ARM
Technical data
26°
26°
26°
mm / 8.6"
219
/ 8.6"
219 mm
26°
mm / 17.2"
438
/ 17.2"
438 mm
Side view
450 mm / 17.7"
531 mm / 20.9"
450 mm / 17.7"
531 mm / 20.9"
Top view
90
°
90
°
www.cim-med.com
130°
130°
°
90
°
180
°
90
°
180
- 12 -
EXTENDED HEIGHT ADJUSTABLE ARM
Monitor adaption
prepared to accept Philips Table Top Mount
Height adjustment
slow-flowing spring, parallel linkage for a constant viewing angle
Colours to choose
decorative parts: RAL 5013 blue / RAL 7024 dark grey
aluminum parts: RAL 9016 pure white / RAL 9002 grey white
Max. load capacity support arm
22 kg/ 48.5 lbs
Max. load monitor adaptation
22 kg/ 48.5 lbs
Product weight
5.4 kg/ 11.9 lbs
Balancing range
800 N (3 - 8 kg/ 6.6 - 17.6 lbs); 950 N (5 - 11 kg/ 11 - 24.3 lbs); 1300 N (9 - 14 kg/ 19.8 - 30.9 lbs);
1750 N (13 - 17 kg/ 28.7 - 37.5 lbs); 2200 N (16 - 22 kg/ 35.3 - 48.5 lbs)
Part number
A-73130PH-Y.CD_X
Fixings
Y
4V
2F
Fixed rail clamp
Adapter for
vertical wall channel
10
Adapter for Maquet
anaesthesia machines
www.cim-med.com
/ details page 33 and 34
Vertical
rail clamp
9
Adapter for
Heinen & Löwenstein
anaesthesia machines
3
3DR
3TX
Dual vertical
rail clamp
1
1F
1C
1V
Fixed / universal
pole clamp
8
82
Lateral adapter
Trumpf
4U
Adapter for
anaesthesia machines
with existing side channel
- 13 -
EXTENDED HEIGHT ADJUSTABLE ARM
Technical data
26°
26°
26°
/ 8.6"
mm / 8.6"
219 mm
219
26°
230 mm / 9.1"
450 mm / 17.7"
230 mm / 9.1"
761 mm / 30.0"
450 mm / 17.7"
/ 17.2"
mm / 17.2"
438 mm
438
Side view
761 mm / 30.0"
Top view
130°
90
°
130°
90
°
°
90
°
90
www.cim-med.com
± 180°
°
180
± 180°
°
180
- 14 -
HIGH POSITION HEIGHT ADJUSTABLE ARM
Monitor adaption
prepared to accept Philips Table Top Mount
Height adjustment
slow-flowing spring, parallel linkage for a constant viewing angle
Colours to choose
decorative parts: RAL 5013 blue / RAL 7024 dark grey
aluminum parts: RAL 9016 pure white / RAL 9002 grey white
Max. load capacity support arm
22 kg/ 48.5 lbs
Max. load monitor adaptation
22 kg/ 48.5 lbs
Product weight
3.5 kg/ 7.7 lbs
Balancing range
800 N (3 - 8 kg/ 6.6 - 17.6 lbs); 950 N (5 - 11 kg/ 11 - 24.3 lbs); 1300 N (9 - 14 kg/ 19.8 - 30.9 lbs);
1750 N (13 - 17 kg/ 28.7 - 37.5 lbs); 2200 N (16 - 22 kg/ 35.3 - 48.5 lbs)
Part number
A-531PH-Y.CD_X
Fixings
Y
4U
Adapter for
vertical wall channel
www.cim-med.com
/ details page 33
3
Vertical
rail clamp
3DR
3TX
Dual vertical
rail clamp
1
1F
1C
1V
Fixed / universal
pole clamp
8
82
Lateral adapter
Trumpf
- 15 -
HIGH POSITION HEIGHT ADJUSTABLE ARM
Technical data
Side view
/ 17.2"
/ 17.2"
mmmm
438438
26°
26°
/ 8.6"
/ 8.6"
mmmm
219219
26°
26°
450 mm / 17.7"
450 mm / 17.7"
531 mm / 20.9"
531 mm / 20.9"
Top view
90
°
90
°
°
90
°
0
9
www.cim-med.com
130°
130°
°
180
°
180
- 16 -
EXTENDED HIGH POSITION HEIGHT ADJUSTABLE ARM
Monitor adaption
prepared to accept Philips Table Top Mount
Height adjustment
slow-flowing spring, parallel linkage for a constant viewing angle
Colours to choose
decorative parts: RAL 5013 blue / RAL 7024 dark grey
aluminum parts: RAL 9016 pure white / RAL 9002 grey white
Max. load capacity support arm
22 kg/ 48.5 lbs
Max. load monitor adaptation
22 kg/ 48.5 lbs
Product weight
5,4 kg/ 11.9 lbs
Balancing range
800 N (3 - 8 kg/ 6.6 - 17.6 lbs); 950 N (5 - 11 kg/ 11 - 24.3 lbs); 1300 N (9 - 14 kg/ 19.8 - 30.9 lbs);
1750 N (13 - 17 kg/ 28.7 - 37.5 lbs); 2200 N (16 - 22 kg/ 35.3 - 48.5 lbs)
Part number
A-83130PH-Y.CD_X
Fixings
Y
4U
Adapter for
vertical wall channel
www.cim-med.com
/ details page 33
3
Vertical
rail clamp
3DR
3TX
Dual vertical
rail clamp
1
1F
1C
1V
Fixed / universal
pole clamp
8
82
Lateral adapter
Trumpf
- 17 -
EXTENDED HIGH POSITION HEIGHT ADJUSTABLE ARM
Technical data
Side view
230 mm / 9.1"
230 mm / 9.1"
/ 17.2"
mm
438
/ 17.2"
mm
438
26°
26°
/ 8.6"
mm
219
/ 8.6"
mm
219
26°
26°
450 mm / 17.7"
450 mm / 17.7"
761 mm / 30.0"
761 mm / 30.0"
Top view
130°
130°
90
90°
°
°
90 °
90
www.cim-med.com
± 180°
± 180°
°
1800°
18
- 18 -
COUNTER TOP
Monitor adaption
prepared to accept Philips Table Top Mount
Colours to choose
decorative parts: RAL 5013 blue / RAL 7024 dark grey
aluminum parts: RAL 9016 pure white / RAL 9002 grey white
Maximum load
18 kg/ 39.7 lbs
Part number
Counter top with base plate (see illustration)
T-HPH-60.CD_50
height 50 mm/ 2”
T-HPH-60.CD_120
height 120 mm/ 4.7”
Counter top without base plate
www.cim-med.com
T-HPH-69.CD_50
height 50 mm/ 2”
T-HPH-69.CD_120
height 120 mm/ 4.7”
- 19 -
COUNTER TOP
Technical data - with base plate
16°
20°
16°
20°
88 mm / 3.5"
/ 6.5"mm / 6.5"
165 mm 165
/ 4.7"mm / 4.7"
120 mm 120
Side view
88 mm / 3.5"
130 mm / 5.1"
20°
20°
20°
20°
/ 5.1"mm / 5.1"
130 mm 130
Top view
130 mm / 5.1"
www.cim-med.com
- 20 -
CART LIGHT DUTY
Part number
Cart
R-002PH.CD
double wheel castors, ø 100 mm, 2 lockable
Basket big
Z-51-4Z
•
column to accept components and accessories on opposite sides
Basket small
Z-52-4Z
•
monitor adapter prepared for Philips Table Top mount
Handle
Z-HD-4Z.e1
•
colours to choose:
•
5-star base aluminum base with counter weight
•
decorative parts: RAL 5013 blue / RAL 7024 dark grey
base: RAL 9016 pure white (part no. code 1) / RAL 5013 blue (part no. code 6)
•
maximum weight: 14 kg/ 30.9 lbs
Optional Accessories
•
basket big 300 x 200 x 180 mm/ 11.8 x 7.9 x 7.1”
basket small 200 x 150 x 100 mm/ 7.9 x 5.9 x 3.9”
•
handle
www.cim-med.com
- 21 -
CART LIGHT DUTY
Technical data
22°
24°
22°
24°
35.4"
/ 35.4"
900 mm
900/mm
43.6"
/ 43.6"
mm /mm
11081108
Side view
21.5"
/ 21.5"
547 mm
547/mm
Top view
523 mm / 20.6"
523 mm / 20.6"
www.cim-med.com
- 22 -
SUPPORT ARM PIVOT FOR FMS
Monitor adaption
adapter for FMS
Colours to choose
decorative parts: RAL 5013 blue / RAL 7024 dark grey
aluminum parts: RAL 9016 pure white / RAL 9002 grey white
Max. load capacity support arm
18 kg/ 39.7 lbs
Max. load monitor adaptation
18 kg/ 39.7 lbs
Product weight
240 mm/ 9.5”: 1.9 kg/ 4.2 lbs; 300 mm/ 11.8”: 2 kg/ 4.4 lbs
Part number
A-224FMS-Y.CD
arm length 240 mm/ 9.5”
A-230FMS-Y.CD
arm length 300 mm/ 11.8”
Fixings
Y
4V
2F
Fixed rail clamp
Adapter for
vertical wall channel
10
Adapter for Maquet
anaesthesia machines
www.cim-med.com
/ details page 33 and 34
Vertical
rail clamp
9
Adapter for
Heinen & Löwenstein
anaesthesia machines
3
3DR
3TX
Dual vertical
rail clamp
1
1F
1C
1V
Fixed / universal
pole clamp
8
82
Lateral adapter
Trumpf
4U
Adapter for
anaesthesia machines
with existing side channel
- 23 -
SUPPORT ARM PIVOT FOR FMS
Technical data - arm length 300 mm / 11.8”
Side view
10
0°
70
°
10
0°
70
°
229 mm / 9.0"
380 mm / 15.0"
229 mm / 9.0"
380 mm / 15.0"
Top view
www.cim-med.com
10
5°
11
5°
10
5°
11
5°
5°
10
5°
11
5°
10
5°
11
- 24 -
EXTENDED PIVOT ARM FOR FMS, UP TO 12 KG / 26.5 LBS
Monitor adaption
adapter for FMS
Colours to choose
decorative parts: RAL 5013 blue / RAL 7024 dark grey
aluminum parts: RAL 9016 pure white / RAL 9002 grey white
Max. load capacity support arm
12 kg/ 26.5 lbs
Max. load monitor adaptation
12 kg/ 26.5 lbs
Product weight
2,8 kg/ 6.2 lbs
Part number
A-33030FMS-Y.CD
Fixings
Y
4V
2F
Fixed rail clamp
Adapter for
vertical wall channel
10
Adapter for Maquet
anaesthesia machines
www.cim-med.com
/ details page 33 and 34
Vertical
rail clamp
9
Adapter for
Heinen & Löwenstein
anaesthesia machines
3
3DR
3TX
Dual vertical
rail clamp
1
1F
1C
1V
Fixed / universal
pole clamp
8
82
Lateral adapter
Trumpf
4U
Adapter for
anaesthesia machines
with existing side channel
- 25 -
EXTENDED PIVOT ARM FOR FMS, UP TO 12 KG / 26.5 LBS
Technical data
Side view
10
0°
70
°
10
0°
70
°
229 mm / 9.0"
229 mm / 9.0"
609 mm / 24.0"
229 mm / 9.0"
229 mm / 9.0"
609 mm / 24.0"
Top view
www.cim-med.com
10
5°
165°
11
5°
10
5°
165°
11
5°
5°
10
165°
5°
11
5°
10
165°
5°
11
- 26 -
DOWN POST FOR INTELLIVUE FMS
Part number
To attach to non-height adjustable arms
Z-DP-70.1_150
length 150 mm/ 5.9”
Z-DP-70.1_300
length 300 mm/ 11.8”
Z-DPR-70.1_150
rotatable, length 150 mm/ 5.9”
Z-DPR-70.1_300
rotatable, length 300 mm/ 11.8”
To attach to height adjustable arms
www.cim-med.com
Z-DP-71.1_150
length 150 mm/ 5.9”
Z-DP-71.1_300
length 300 mm/ 11.8”
Z-DPR-71.1_150
rotatable, length 150 mm/ 5.9”
Z-DPR-71.1_300
rotatable, length 300 mm/ 11.8”
- 27 -
MOUNT FOR MP2/ X2
MP2/ X2 mount with power supply
Part no. Z-MP2PS-6
univeral horizonal rail clamp
Part no. Z-MP2PS-3
vertical rail clamp
Part no. Z-MP2PS-4Z
adapter for vertical wall channel (illustration)
Part no. Z-MP2PS-1V
universal pole clamp
MP2/ X2 mount without power supply
www.cim-med.com
Part no. Z-MP2-6
univeral horizonal rail clamp
Part no. Z-MP2-3
vertical rail clamp
Part no. Z-MP2-4Z
adapter for vertical wall channel (illustration)
Part no. Z-MP2-1V
universal pole clamp
- 28 -
SUPPORT ARM PIVOT FOR MP2/ X2
Monitor adaption
adapter for MP2/ X2
Colours to choose
decorative parts: RAL 5013 blue / RAL 7024 dark grey
aluminum parts: RAL 9016 pure white / RAL 9002 grey white
Max. load capacity support arm
18 kg/ 39.7 lbs
Max. load monitor adaptation
18 kg/ 39.7 lbs
Product weight
224MP2, 224MP2PS: 2.4 kg/ 5.3 lbs; 230MP2, 230MP2PS: 2.5 kg/ 5.5 lbs
Part number
with power supply
without power supply (illustration)
A-224MP2PS-Y.CD
A-224MP2-Y.CD
arm length 240 mm/ 9.5”
A-230MP2PS-Y.CD
A-230MP2-Y.CD
arm length 300 mm/ 11.8”
Fixings
Y
4V
2F
Fixed rail clamp
Adapter for
vertical wall channel
10
Adapter for Maquet
anaesthesia machines
www.cim-med.com
/ details page 33 and 34
Vertical
rail clamp
9
Adapter for
Heinen & Löwenstein
anaesthesia machines
3
3DR
3TX
Dual vertical
rail clamp
1
1F
1C
1V
Fixed / universal
pole clamp
8
82
Lateral adapter
Trumpf
4U
Adapter for
anaesthesia machines
with existing side channel
- 29 -
SUPPORT ARM PIVOT FOR MP2/ X2
Technical data - arm length 300 mm / 11.8”
182 mm / 7.2"
Side view
229 mm / 9.0"
182 mm / 7.2"
462 mm / 18.2"
229 mm / 9.0"
www.cim-med.com
462 mm / 18.2"
10
5
5°°
10
11
5°5°
11
5°
10
5°
11
330 mm / 13.0"
11
5°
330 mm / 13.0"
Top view
10
5°
- 30 -
EXTENDED PIVOT ARM FOR MP2/ X2, UP TO 12 KG / 26.5 LBS
Monitor adaption
adapter for MP2/ X2
Colours to choose
decorative parts: RAL 5013 blue / RAL 7024 dark grey
aluminum parts: RAL 9016 pure white / RAL 9002 grey white
Max. load capacity support arm
12 kg/ 26.5 lbs
Max. load device adaptation
12 kg/ 26.5 lbs
Product weight
3.3 kg/ 7.3 lbs
Part number
without power supply
with power supply (illustration)
A-33030MP2-Y.CD
A-33030MP2PS-Y.CD
Fixings
Y
4V
2F
Fixed rail clamp
Adapter for
vertical wall channel
10
Adapter for Maquet
anaesthesia machines
www.cim-med.com
/ details page 33 and 34
Vertical
rail clamp
9
Adapter for
Heinen & Löwenstein
anaesthesia machines
3
3DR
3TX
Dual vertical
rail clamp
1
1F
1C
1V
Fixed / universal
pole clamp
8
82
Lateral adapter
Trumpf
4U
Adapter for
anaesthesia machines
with existing side channel
- 31 -
EXTENDED PIVOT ARM FOR MP2/ X2, UP TO 12 KG / 26.5 LBS
Technical data
240 mm / 9.4"
Side view
229 mm / 9.0"
240 mm / 9.4"
229 mm / 9.0"
691 mm / 27.2"
229 mm / 9.0"
229 mm / 9.0"
Top view
www.cim-med.com
10
5°
165°
11
5°
10
5°5°
10
165°
165°
11
5°
5°
1
1
5°
10
165°
5°
11
330 mm / 13.0" 330 mm / 13.0"
691 mm / 27.2"
- 32 -
FIXINGS
Illustration
Description
Notes
Part. no
Adapter for
vertical wall channel
To mount to CIM wall channel (compatible with GCX channel)
For arms with high mounting positions
Please order separately: CIM wall channel, see catalogue accessoires
4V
4U
Fixed rail clamp
To mount to horizontal European rails 10 x 25, 10 x 30mm
for all arms
2F
Vertical rail clamp
To mount to vertical European rail 10 x 25 mm
3
Dual vertical rail clamp
To mount to two parallel vertical European rails
10 x 25, 8 x 35, 10 x 30, 10 x 50 mm
Distance between rails 150 mm/ 5.9”, e.g. Dräger pendant
3DR
3TX
Distance between rails 225 mm/ 8.9”, e.g. Trilux pendant
www.cim-med.com
Fixed pole clamp
To mount to pole ø 25 mm/ 1.0”
To mount to pole ø 35 mm/ 1.4”
To mount to pole ø 38 mm/ 1.5”
1
1F
1C
Universal pole clamp
V-block to mount to pole ø 23 - 40 mm/ 0.9 - 1.6”
1V
Lateral adapter
adapter
For Trumpf klinoPORT ceiling pendant
For Trumpf klinoPORT frontal
8
82
- 33 -
FIXINGS FOR ANAESTHESIA MACHINES
Illustration
Description
Notes
Part. no
Adapter for
Maquet
anaesthesia machines
Cone adapter for Maquet FLOW i
10
Adapter for
Heinen & Löwenstein
anaesthesia machines
Adapter for Leon/ Leon plus
9
Adapter for
anaesthesia machines
(all suppliers)
H 80 mm/ 3.1”
With existing side channel
4U
If your anaesthesia machine does not have a side channel already mounted to the machine, please order the following in addition to 4U:
Adapter for Dräger
Adapter for GE
www.cim-med.com
Dräger Primus/ Julian/ Cato/ Fabius GS/ Zeus
side channel adapter L 127 mm/ 5”
side channel adapter L 320 mm/ 12.6”
DR-J01
DR-J02
GE Avance/ Aespire/ Aestiva
side channel adapter L 200 mm/ 7.9”
DX-AES-01
- 34 -
Philips IntelliVue_2017.04_EN
CIM med GmbH • Euro-Industriepark • Margot-Kalinke-Str. 9 • 80939 Munich/ Germany
Phone +49 89. 978 94 08-0 • Telefax +49 89. 978 94 08-29 • E-mail info@cim-med.com
www.cim-med.com
Download PDF
Similar pages