Cisco ME 2600X Series Ethernet Access Switches - AV-iQ

Data Sheet
Cisco ME 2600X Series Ethernet Access Switches
Product Overview
®
The Cisco ME 2600X Series Ethernet Access Switches are the latest members of a family of switches built
specifically for Fiber to the Home (FTTH) and Fiber to the Building (FTTB) services. Expanding Cisco’s residential
FTTx portfolio from Ethernet and Fast Ethernet access to Gigabit Ethernet connections provides the increased
speed needed for quadruple play services expansion. The Cisco ME 2600X is space and power optimized to
address the ever-growing concern of maintaining or lowering network OpEx while providing higher-speed services.
The ME 2600X (Figure 1) is optimized with a low carbon footprint of 1 rack unit (1RU) with forty-four Gigabit
Ethernet user network interfaces (UNI) and four 10-Gigabit Ethernet network-to network interfaces (NNI) which can
also be used as UNIs, and maintains a 2.5W per user power profile.
Figure 1.
Cisco ME 2600X Series Ethernet Access Switches
Cisco ME 2600X Series Ethernet Access Switches provide a 1RU, fixed-form-factor platform hardware-optimized
for ANSI, ETSI, and AC power configurations:
●
Cisco ME 2600X ANSI DC Power with 44 10/100/1000 ports and four 10-Gigabit Ethernet SFP+ ports
●
Cisco ME 2600X ETSI DC Power with 44 10/100/1000 ports and four 10-Gigabit Ethernet SFP+ ports
●
Cisco ME 2600X ANSI DC Power with 44 10/100/1000 ports and four 10-Gigabit Ethernet SFP+ ports
Benefits
Created for the delivery of today’s and tomorrow’s access services, the Cisco ME 2600X Series Ethernet Access
Switches support existing and next-generation features and technology while remaining operationally simple to
deploy and manage. The series offers the following key benefits.
Powered by a High-Performance Application-Specific Integrated Circuit
Powered by a 100-Gbps power-efficient application-specific integrated circuit (ASIC), the Cisco ME 2600X is
designed to provide wire-rate Layer 2 and Layer 3 performance with Ethernet Operations, Administration, and
Management (EOAM), hierarchical quality of service (H-QoS), and Denial of Service (DoS) security, while
maintaining a low power footprint profile with 45 nm complementary metal-oxide-semiconductor (CMOS)
technology. The 100-G ASIC integrates traffic management to deliver intelligent packet switching at wire rate.
Advanced Service-Level Agreements
Service-aware quality of service (QoS) allows service providers to expand and differentiate their residential
services with highly advanced and differentiating service-level agreements (SLAs). The H-QoS capabilities of the
Cisco ME 2600X scale to 384 queues per system, three levels of scheduling, and dynamic buffer management to
address today’s most demanding residential services.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 1 of 7
Operational Efficiency for FTTx Deployments
The Cisco ME2600X includes key features that help to ensure service provider network security and environmental
hardening, lowering operational costs. This unique feature set allows the Cisco ME 2600X to be deployed in a variety
of applications, including business service with 10-Gigabit Ethernet User Network Interface (UNI) and Ethernet mobile
backhaul. These features enhance performance awareness, facilitate troubleshooting, and simplify service turn-up
and restoration, ultimately reducing operational costs. “Dying gasp” for power indicators and four external alarm inputs
to detect changes in remote sites further help service providers manage the health of network elements.
High-Performance Hardware
The Cisco ME 2600X is a nonblocking switching system providing line-rate Ethernet performance. The Cisco ME
2600X is a 1RU platform that has a hot-swappable fan tray and redundant DC power feeds to meet service
provider carrier-class requirements. High availability is achieved on the Cisco ME 2600X through proactive
diagnostic tools including Generic On-Line Diagnostics (GOLD) and Onboard Failure Logging (OBFL). These tools
help service providers to avoid potential problems before they occur and to troubleshoot and diagnose once
problems are identified.
Table 1 lists the hardware parts available for the Cisco ME 2600X.
Table 1.
Cisco ME 2600X Series Ethernet Access Switches Hardware Options
Part Number
Product Name
ME2600X-44FA-D-K9=
ME2600X Ethernet Access Switch 44xGE SFP with 4x10GE SFP+ -48V Power ANSI
ME2600X-44FE-D-K9=
ME2600X Ethernet Access Switch 44xGE SFP with 4x10GE SFP+ -48V Power ETSI
ME2600X-44FA-A-K9=
ME2600X Ethernet Access Switch 44xGE SFP with 4x10GE SFP+ AC Power
ME2600X-FAN=
ME2600X Fan Tray with Filter
The Cisco ME 2600X supports a wide range of Small Form-Factor Pluggable (SFP) and Enhanced SPF (SPF+) optic
modules. Table 2 lists their part numbers.
Table 2.
SFP and SFP+ Modules Supported with Cisco ME 2600X Series Ethernet Access Switches
Part number
SFP
SFP+
● ONS-SE-100-LX10
● ONS-SI-100-LX10
● ONS-SI-GE-LX
● ONS-SI-GE-ZX
● ONS-SI-100-FX
● ONS-SE-100-BX10U
● ONS-SE-GE-ZX
● ONS-SE-GE-BXD
● ONS-SE-100-BX10D
● GLC-BX-D
● ONS-SE-GE-BXU
● ONS-SC-GE-BXU
● GLC-BX-U
● GLC-FE-100BX-D
● ONS-SC-GE-BXD
● ONS-SI-GE-EX
● GLC-FE-100BX-U
● ONS-SI-GE-SX
● ONS-SE-ZE-EL
● ONS-SC-2G-xx.x
● ONS-SC-GE-LX
● ONS-SE-2G-xxxx
● ONS-SC+-10G-SR
● ONS-SC+-10G-ER
● ONS-SC+-10G-CU1
● ONS-SC+-10G-CU3
● ONS-SC+-10G-LR
● ONS-SE+-10G-LR
● ONS-SC+-10G-CU5
● ONS-SC+-10G-CU7
● ONS-SC+-10G-LRM
● ONS-SC+-10G-ZR
● ONS-SC+-10G-xx.x
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 2 of 7
®
Table 3 lists the key features in the Cisco IOS Software license for the Cisco ME 2600X Series Ethernet Access
Switches and Table 4 lists the software options.
Table 3.
Feature Set in Cisco ME 2600X Series Ethernet Access Switches Base Feature License
License
Features
SL-ME2600X-B
● Layer 2 (EVC, 802.1q, 802.1ad)
● DHCPv4 snooping with option-82
● Dynamic port provisioning
● ICMP rate limiting
● DHCPv4 rate limiting
● Dynamic ARP inspection
● ARP rate limiting per port
● Resilient Ethernet Protocol (REP)
● IP source guard
● MAC security
● Link Aggregation Group and Link Aggregation
● Control protocol
● Supports access control list (ACL) per EFP
● Supports storm control
● Multicast VLAN registration
● IGMP snooping
● Control plane security
Table 4.
Cisco ME 2600X Series Ethernet Access Switches Software Options
Part Number
Product Name
License Options
SL-ME2600X-B
ME2600X Base Features License
Software Options
S2600UK9-15202SA
Cisco ME 2600X Series Aggregation IOS Software: Universal Release 15.2(02)SA
Key Features
Table 5 lists the features of the Cisco ME 2600X Series Ethernet Access Switches.
Table 5.
Cisco ME 2600X Series Ethernet Access Switches Features
Description
Ethernet Services
Ethernet Virtual Connections
(EVCs)
Ethernet Security
Specification
● 802.1
● 802.1q
● 802.1ad (QinQ, Selective QinQ)
● Inner and outer VLAN classification
● 802.1
● 802.1q
● 802.1ad (QinQ, selective QinQ)
● Inner and outer VLAN classification
QoS
● Up to 416 egress queues per system
● Class-Based Weighted Fair Queuing (CBWFQ)
● Priority queuing
● 2-rate 3-color (2R3C) ingress policing, egress policing (1R2C) for LLQ
● Ingress and egress marking (class of service [CoS], DSCP)
● Egress shaping per port
● 3-level HQoS
● Classification based on inner and outer CoS or VLAN ID
● Copy inner to outer CoS
Multicast
● Multicast VLAN registration
● IGMP v2 and v3 snooping
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 3 of 7
Description
Specification
Management Security
● Authentication, authorization and accounting (AAA)
● TACACS+
● RADIUS
● Secure Shell (SSH) Protocol
● Control plane policing
● Resilient Ethernet Protocol
● Flexlink
Availability
● 802.3ad Link Aggregation Control Protocol
Manageability
● Simple Network Management Protocol (SNMP)
● MIBs
● Cisco Discovery Protocol
● Cisco Prime™ Network
● Cisco Prime Provisioning
● OSPF, IS-IS, BGP
● Dynamic Port Provisioning
● Switch Database Management (SDM)
Product Specifications
Tables 6 through 8 list product, power, and environmental specifications for the Cisco ME 3600X Series.
Table 9 lists standards and protocols, and Table 10 gives safety and compliance information. Table 11
provides ordering information.
Table 6.
Product Specifications
Cisco ME2600X-44FA-D-K9
Cisco ME2600X-44FE-D-K9
Cisco ME2600X-44FA-A-K9
Forwarding bandwidth full duplex
88 Gbps
88 Gbps
Forwarding rate
65 Mpps
65 Mpps
Configurable maximum
transmission unit (MTU)
Up to 9,600 bytes, for bridging on Gigabit and 10Gigabit Ethernet
Up to 9,600 bytes, for bridging on Gigabit and 10Gigabit Ethernet
DRAM
2 GB
2 GB
Flash
256 MB
256 MB
Packet buffer
4 MB
4 MB
Specification
Performance
Memory
Connectors and Cabling
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 4 of 7
Cisco ME2600X-44FA-D-K9
Cisco ME2600X-44FE-D-K9
Specification
SFP ports
● 10/100/1000BASE-T SFP-based ports: RJ-45
connectors, 4-pair Category 5 UTP cabling
● 100BASE-FX and -LX: Duplex LC receptacle
fiber connectors (multimode and single-mode)
● 100BASE-BX: Single-fiber LC receptacle
connector (single-mode fiber)
● 100BASE-EX: SFP module for 100 Mb port,
1310 nm wavelength, 40 km over single-mode
fiber
● 100BASE-ZX: SFP module for 100 Mb port,
1550 nm wavelength, 80 km over single-mode
fiber
● 1000BASE-BX: Single-fiber LC receptacle
connector (single-mode fiber)
● 1000BASE-SX, -LX/LH, -EX and -ZX and
CWDM and DWDM: Duplex LC receptacle fiber
connectors (multimode and single-mode fiber)
SFP+ Ports
● ONS-SC+-10G-SR
● ONS-SC+-10G-ER
Cisco ME2600X-44FA-A-K9
● 10/100/1000BASE-T SFP-based ports: RJ-45
connectors, 4-pair Category 5 UTP cabling
● 100BASE-FX and -LX: Duplex LC receptacle fiber
connectors (multimode and single-mode)
● 100BASE-BX: Single-fiber LC receptacle connector
(single-mode fiber)
● 100BASE-EX: SFP module for 100 Mb port, 1310
nm wavelength, 40 km over single-mode fiber
● 100BASE-ZX: SFP module for 100 Mb port, 1550
nm wavelength, 80 km over single-mode fiber
● 1000BASE-BX: Single-fiber LC receptacle
connector (single-mode fiber)
● 1000BASE-SX, -LX/LH, -EX and -ZX and CWDM
and DWDM: Duplex LC receptacle fiber connectors
(multimode and single-mode fiber)
● ONS-SC+-10G-LR
● ONS-SE+-10G-LR
● ONS-SC+-10G-LRM
● ONS-SC+-10G-ZR
● ONS-SC+-10G-xx.x
● ONS-SC+-10G-CUx
● ONS-SG+-CUx where x = 1, 3, or 5 meters
● SFP+ port supports 1000BASE-X except 1000BASE-T
● Management console port: RJ-45-to-DB9 cable for PC connections
● Management 10/100/1000 Ethernet: RJ-45 connector
● BITS and alarm ports: RJ-45 connector
● Per-port status LEDs: port enabled, disabled, and activity indicator
● Unit power status LED
Indicators
● Alarm status LED
● System-status LED
Dimensions (HxWxL)
1.56 in. x 17.42 in. x 9.1 in. (39.62 mm x 442.39 mm x 231.01 mm)
Weight
ME2600X-44FA-D-K9: 9.30 lbs (4.22 kg)
ME2600X-44FA-A-K9: 8.95 lbs (4.06 kg)
ME2600X-44FE-D-K9: 9.30 lbs (4.22 kg)
ME2600X-FAN=: 1.32 lb (600 g)
ME2600X-FAN=: 1.32 lb (600 g)
Mean Time Between Failure
ME2600X-44FA-D-K9: 587,750 hours
ME2600X-44FA-A-K9: 595,950 hours
ME2600X-44FE-D-K9: 584,700 hours
ME2600X-FAN=: 400,000 hours
ME2600X-FAN=: 400,000 hours
Table 7.
Power Specifications
Description
Power consumption
(includes fan tray)
Cisco ME2600X-44FA-D-K9
Cisco ME2600X-44FE-D-K9
Cisco ME2600X-44FA-A-K9
● 120W (nominal)
● 170W (maximum)
● 6.82 Btus per minute (nominal)
● 120W (nominal)
● 170W (maximum)
● 6.82 Btus per minute (nominal)
● 9.67 Btus per minute (maximum)
● Fan Tray (36W)
● 9.67 Btus per minute (maximum)
● Fan Tray (36W)
AC input voltage and frequency
100 to 240 VAC, 50 to 60Hz
DC input voltages
–40.5 to 57.6 VDC
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 5 of 7
Table 8.
Environmental Specifications
Network Equipment Building Standards (NEBS)
Operating environment and
altitude
Temperature: –40 to 149°F (–40 to +65°C)
Relative humidity
5% to 95%, noncondensing
Acoustic noise
LpA: 60.9 dB typical, 64.7 dB maximum
Altitude: 13,123 ft (4000m)
LwA: 14.1 @ 100 Hz Bel typical, 71.7 @ 1600 Hz Bel maximum
Storage environment
Temperature: –40 to 158°F (–40 to +70°C)
Altitude: 13,123.36 ft (4000m)
Table 9.
Standards and Protocols
Standards and Protocols
● IEEE 802.1s
● IEEE 802.1w
● IEEE 802.1Q VLAN
● IEEE 802.3 10BASE-T
● IEEE 802.3ad
● IEEE 802.3ah
● IEEE 802.3u 100BASE-T
● IEEE 802.3ab 1000BASE-T
● IEEE 802.1ag
● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and
1000BASE-T ports
● IEEE 802.1p CoS classification
● IEEE 802.3z 1000BASE-X
● OSPF, IS-IS, BGP, HSRP, EIGRP
Table 10.
● Management: SNMP versions 1, 2, and 3
Safety and Compliance
Type
Standards
Electromagnetic
FCC Part 15 Class
Emissions compliance
● EN 60950-1 with all amendments
● CE Marking
Safety
● CAN/CSA 22.2 NO. 60950-1, 2nd edition Amendment 1
● CSA to UL 60950-1 2nd edition
● CB to IEC 60950-1 with all country deviations
● CE Marking
NEBS
GR-63-CORE, GR-1089-CORE: Level 3, Type 2
ETSI
EN 300 019: Storage Class 1.2, Transportation Class 2.3, In-Use Class 3.2
Table 11.
Ordering Information
Product Name
Part Number
ME2600X-44FA-D-K9=
ME2600X Ethernet Access Switch 44xGE SFP with 4x10GE SFP+ -48V Power ANSI
ME2600X-44FE-D-K9=
ME2600X Ethernet Access Switch 44xGE SFP with 4x10GE SFP+ -48V Power ETSI
ME2600X-44FA-A-K9=
ME2600X Ethernet Access Switch 44xGE SFP with 4x10GE SFP+ AC Power
ME2600X-FAN=
ME2600X Fan Tray with Filter
S2600UK9-15202SA
Cisco ME 2600X Series Aggregation IOS Software Universal Release 15.2(02)SA
SL-ME2600X-B
ME2600X Base Features License
Service and Support
Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs
are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of
customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 6 of 7
prepare your network for new applications to extend network intelligence and the power of your business. For more
information about Cisco services, refer to Cisco Technical Support Services or Cisco Advanced Services.
Cisco is committed to minimizing your total cost of ownership. Cisco offers a portfolio of technical support services to
help ensure that Cisco products operate efficiently, remain highly available, and benefit from the most up-to-date
system software. The services and support programs described in Table 12 are available as part of the Cisco Carrier
Ethernet Switching Service and Support solution, and are available directly from Cisco and through resellers.
Table 12.
Service and Support
Service and Support
Features
Benefits
Advanced Services
Cisco Total Implementation Solutions (TIS),
available directly from Cisco
● Project management
● Site survey, configuration, and deployment
● Supplement existing staff
● Help ensure functions meet needs
Cisco Packaged TIS, available through
resellers
● Installation, text, and cutover
● Training
● Mitigate risk
● Major moves, adds, and changes
● Design review and product staging
Cisco SP Base Support and Service ProviderBased Onsite Support, available directly from
Cisco
Cisco Packaged Service Provider-Based
Support, available through resellers
● 24-hour access to software updates
● Web access to technical repositories
● Telephone support through the Cisco
Technical Assistance Center (TAC)
● Advance replacement of hardware parts
Printed in USA
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
● Facilitate proactive or expedited problem
resolution
● Lower total cost of ownership by taking
advantage of Cisco expertise and
knowledge
● Minimize network downtime
C78-726235-00
02/13
Page 7 of 7
Download PDF
Similar pages