We Make Good Ideas
LOCK TECHNOLOGY, INC.
552 S. Washington Street, Suite 108 • Naperville, Illinois 60540
Toll Free 1-800-421-7241 • FAX 630-983-5967
WEB: www.ltitools.com • E-mail: ltitools@ltitools.com
LTI TOOLS HAS AN AWARDS AND ROYALTY PROGRAM FOR YOUR NEW HAND TOOL IDEAS.
WE OFFER YOU INTERNATIONAL DISTRIBUTION.
IF YOU HAVE A NEW PRODUCT IDEA, PLEASE CONTACT US.
WHEEL & BRAKE
LT830A Universal Hub Shocker
Safely remove all frozen hubs instantly without
damaging the axle. Universal fit mounts to all axle bolted
hubs - 5, 6 & 8 lug hubs. Mounts to two studs using the
supplied flanged nuts in seconds. Use with 5 lb. hammer
to knock frozen hubs out of axles. Flanged nuts included
for improved safety and performance. Ideal for Dodge
and other HD trucks. Two mounting holes in 3/4” steel
back plate. 1/4” steel square tubing and striking plate.
LT4980 12 Point Socket Euro/Asian
Axle Nut Kit
AUDI - BMW - MERCEDES - VW - LEXUS - TOYOTA
The LT4980 is a convenient packaged dedicated
German/Asian axle nut kit. This kit contains 4 - 12 point
½”drive molybdenum impact sockets.
Socket sizes 24mm
30mm
32mm
36mm
Included flanged
nut sizes - 2 each
12mm - 1.50
14mm - 1.50
7/16” - 20
½” - 20
9/16”
5/8” - 18
LT4990 5 pc. Euro Axle Nut Socket Set
AUDI - VW - MERCEDES ML
in use
2
The LT4490 is an easy to use dedicated kit for German
vehicle axle nuts. The M18 ½”drive chrome
molybdenum impact socket for is rear bearing
assemblies on VW Golf/Jetta and other M/C 5 chassis
for VW/Audi. The E24 ½”drive chrome molybdenum
impact socket is for Mercedes ML axles. Also includes
19mm - 17mm - 14mm ½”hex drive sockets for internal
drive axle nuts on VW/Audi vehicles.
LT993 Brake Re-threading Kit
The LT993 re-threads damaged brake wheel cylinders,
master cylinder fittings, ABS control module fittings and
brake line fittings on vehicles. Works on vehicle where
stand alone tap and dies won’t fit. Convenient, fast and
easy vehicle applications. Compact design male/female
combo sockets.
LT4569 German Vehicle Rotating Ring
Lug Nut Removal Kit
AUDI - BMW - PORSHCE - MERCEDES BENZ - VW
THE LT993 WORKS ON -
The LT4569 easily removes rotating ring lug nut locks
from German vehicles. Use the high heat resistant
LT4569A Silicon Welding Shield to protect wheel from
heat damage. Then a Mig welder is used to apply weld
slag material at 4 front corners of lug nut. The extra weld
material welded to face of lug nut will provide an ideal
surface for the LT4569B Twist Socket to gab lug nut for
easy removal. LT4569A consumable item with factory
defect warranty only. LT4569B has a lifetime warranty.
Patent Pending on LT4569A Silicon Welding Shield.
NEW PRODUCT
LT4569A
2
IN USE
READY FOR REMOVAL
LT4569B
LT1350 Lug Ripper II
Don’t torch frozen/damaged lug nuts off - just drill out the lug
nut/stud threads only in 11 minutes or less. Doesn’t drill out the
whole lug nut, just the threads. Second generation Lug Ripper.
Easily replace damaged lug nut/stud with threads now removed.
16mm Tungsten steel drill bit w/4 carbide cutters allow for speed
& durability. Does not damage rim. Comes with a locking collar
clamp for safety. The LT1350-8 Water Bladder is now available
to purchase keeping coolant flowing with six feet of hose and a
control valve for one man operation. Includes 4 drill guides.
Packaged in a custom blow molded case. Patent Pending.
Tungsten
drill bit
w/4 carbide
cutters
up-close
LT1350-8
LT1350-8 IN USE
Drill guide sizes 17mm - 11/16”
19mm - 3/4”
21mm - 13/16”
23mm - 7/8”
Drills out female/male threads
on lug/stud only
LT890 Truck Brake Spring Tool
LT895 Eaton Truck Brake Spring Tool
The LT890 easily connects rear drum brake return
springs. Easy one hand operation. Slotted ends on tool
always hold spring at correct work angle. No need to
leverage tool against a solid surface during spring
installation. FAST - EASY - SAFE
The LT895 easily installs Eaton air brake shoe anchor
springs. Universal fit for all Eaton air brake shoe anchor
springs. FAST - EASY - SAFE
ADJUSTS
TO 3 SIZES
LT770 Universal Brake Piston Press
The LT770 Universal Brake Piston
Press is for pressing in dual brake
pistons and single brake pistons.
Universal application for most cars,
light and heavy trucks. Single piece
operation - eliminates nuts and
bolts to assemble and disassemble
on brake assemblies.
Works on all German vehicle brake caliper applications.
Every German vehicle brake caliper socket/bit when
you need it. Packaged in a custom blow molded case.
Lifetime warranty. Patent Pending.
NEW
PRODUCT
NEW &
IMPROVED
in use single piston
LT4995 German Vehicle Brake Caliper
Socket And Bit Set
in use dual piston
Includes
1/4" drive bits 9mm x 20mm
3/8" drive bits 7mm x 24mm
8mm x 24mm
9mm x 50mm
7mm x 65mm
7mm x 92mm,
11mm x 100mm
1/2" drive sockets 11.5mm x 50mm
AS22 x 48mm
3
LT4150 VW/AUDI Wheel Lock Key Kit
The LT4150 is a 23 piece factory reproduced master
wheel lug nut key/bolt kit for the removal of all 1st
generation VW/Audi factory wheel lug nut locks. This
kit includes 22 splined lug nut keys with a nylon sleeved
½”drive 17mm installer socket. Identical to factory set uses same factory part numbers. Packaged in a custom
blow molded carrying case.
LT4160 BMW Wheel Lock Bolt Kit
The LT4160 is a 21 piece factory reproduced master
wheel lug nut key/bolt kit for the removal of all 1st
generation BMW internal spline drive wheel locks. This kit
includes 20 splined lug nut keys with a nylon sleeved
½”drive 17mm installer socket. Identical to factory set uses same factory part numbers. Packaged in a custom
blow molded carrying case.
LT4155 VW 2nd Generation
Wheel Lock Master Key Set
The LT4155 is a 20 piece factory reproduced master
wheel lock key set for the removal of all 2nd generation
2009-present VW factory wheel lug nut locks. Identical
to factory set - uses same factory part numbers.
Packaged in a custom blow molded carrying case.
NO WARRANTY - CANNOT BE USED
WITH AN IMPACT GUN.
LT4165 BMW 2nd Generation
Wheel Lock Master Key Set
The LT4165 is a 20 piece factory reproduced master
wheel lock key set for the removal of all 2nd generation
2011-present BMW factory wheel lug nut locks. Identical
to factory set - uses same factory part numbers. Packaged
in a custom blow molded carrying case. NOTE: Same as
Mercedes "B" Wheel Lock Master Key Set. Covers 20
Mercedes Benz/BMW master wheel lock keys.
NO WARRANTY - CANNOT BE USED
WITH AN IMPACT GUN.
LT4170 Porsche Wheel Master Lock Set
LT4175 Audi Wheel Master Lock Set
The LT4170 is a 20 piece factory duplicate master wheel
lock key set for the removal of 2006-present Porsche
factory wheel lug nut locks. Identical to factory set - uses
same factory part numbers. Packaged in a custom blow
molded carrying case.
The LT4175 is a 20 piece factory duplicate master wheel
lock key set for the removal of 2006-present Audi factory
wheel lug nut locks. Identical to factory set - uses same
factory part numbers. Packaged in a custom blow molded
carrying case.
NO WARRANTY - CANNOT BE USED
WITH AN IMPACT GUN.
4
LT4180 Mercedes Benz “A” Wheel Lock
Master Key Set
LT4181 Mercedes Benz “C” Wheel Lock
Master Key Set
The LT4180 is a 30 piece kit that
works on 2006-present
MERCEDES BENZ factory wheel
lug nut locks. Factory duplicate uses same factory part numbers.
NOTE: Covers 30 of the 60
Mercedes factory master wheel
lock keys. Packaged in a custom
blow molded carrying case.
The LT4181 is a 10 piece factory duplicate master wheel
lock key set for the removal of 10 of the 60 Mercedes
Benz factory wheel lug nut locks. Identical to factory set
- uses same factory part numbers. Packaged in a custom
blow molded carrying case.
INDIVIDUAL LT4180
WHEEL LOCK KEY
NO WARRANTY - CANNOT BE USED
WITH AN IMPACT GUN.
NO WARRANTY - CANNOT BE USED
WITH AN IMPACT GUN.
INDIVIDUAL LT4181
WHEEL LOCK KEY
LT1230 5 Pc. ½” Drive Dual Sided Socket Lug Nut Removal Kit w/Punch
4
Use
these dedicated sockets every time you remove damaged/distorted lug nuts
with steel caps. These lug nuts become distorted due to improper leverage using
the factory supplied tire iron. Removing over-torqued lug nuts during extreme
cold/heat also distorts lug nut cap. Dual flip ½” drive impact socket design. Comes
in a custom vinyl case. Includes 4 lug nut removal tools and an Extractor Punch.
Works on damaged/distorted
lug nuts with steel caps
LT1240
LT1250
LT1260
LT1270
LT-400-7
21/21.5mm Chrome Cap Buster
18.5/19.5mm Chrome Cap Buster
22/22.5mm Chrome Cap Buster
1 1/16”/27.5mm Chrome Cap Buster
Extractor Punch
LT1233 4 Pc. ½” Drive Dual Sided Socket Lug Nut Removal Kit w/Punch
Use these dedicated sockets every time you remove damaged/distorted lug nuts
with steel caps. These lug nuts become distorted due to improper leverage using the
factory supplied tire iron. Removing over-torqued lug nuts during extreme cold/heat
NEW
PRODUCT
also distorts lug nut cap. Dual flip ½” drive impact socket design. Comes in a blow
molded carrying case. Includes 3 lug nut removal tools and an Extractor Punch.
Works on damaged/distorted
lug nuts with steel caps
LT1240
LT1250
LT1260
LT-400-7
21/21.5mm Chrome Cap Buster
18.5/19.5mm Chrome Cap Buster
22/22.5mm Chrome Cap Buster
Extractor Punch
LT1240 ½” Drive Dual Sided Socket
Lug Nut Remover Tool
21/21.5mm Chrome Cap Buster
LT1260 ½” Drive Dual Sided Socket
Lug Nut Remover Tool
22/22.5mm Chrome Cap Buster
Dual flip ½” drive impact design. Removes missing and
distorted lug nuts with chrome caps. Works on
Chrysler/Dodge 21mm chrome cap lug nuts. Use this
dedicated socket every time you remove 21mm lug nuts.
Dual flip ½” drive impact design. Removes missing and
distorted lug nuts with chrome caps. Works on all
Chrysler/Dodge 22mm chrome cap lug nuts. Use this
dedicated socket every time you remove 22mm lug nuts.
LT1250 ½” Drive Dual Sided Socket
Lug Nut Remover Tool
18.5/19.5mm Chrome Cap Buster
LT1270 ½” Drive Dual Sided Socket
Lug Nut Remover Tool
1 1/16” /27.5mm Chrome Cap Buster
Dual flip ½” drive impact design. Removes missing and
distorted lug nuts with chrome caps. Works on 19mm chrome
caps found on many GM & Chrysler vehicles. Use this
dedicated socket every time you remove 19mm lug nuts.
Dual flip ½” drive impact design. Removes missing and
distorted lug nuts with chrome caps. Works on Range
Rover/Land Rover chrome cap lug nuts. Use this dedicated
socket every time you remove 1 1/16” lug nuts.
5
LT2510, LT-2520 & LT-2530
E-Z Loader Magazine Lug Nut Sockets
The E-Z Loader is a magazine loading impact socket
for multiple lug nut removal. The E-Z Loader removes
up to 5 lug nuts at the wheel work site and allows the
mechanic to release all of the lug nuts at once. No
more rolling or lost lug nuts and wasted motion. The
E-Z Loader also adjusts type 9, 12, and 16 cubic inch
air chambers that are equipped with ½”20 threaded
rod and 3/4” nut. A real time saver. A “MUST” tool
for tire shops, brake shops, and locations with high
volume wheel removal.
LT465 12MM & 14MM Wheel Hanger Guides
Wheel Hanger Guides slide into wheel lug nut holes
without using threads aiding technicians during wheel
mounting. Saves time - no threads, no turning wheel
guides to install and remove. Works on Mercedes,
Audi, BMW, Mini Cooper, SAAB and Volvo vehicles.
Wheel Hanger Guides support wheel/tire so technician
can easily thread lug nut bolts into brake rotor. Each kit
includes one 12MM and one 14MM Wheel Hanger
Guide. Easily slides in and out of rotor holes without
using threads. Must have for removing wheels. Helps
prevent scratches on expensive wheels. Made of
durable bulletproof polycarbonate plastic. Purchase a
LT465 kit for the price of one steel hanger pin.
Available in 3 sizes:
LT2510 3/4”, 19mm
LT-2520 21mm
LT-2530 13/16”
14MM WHEEL HANGER GUIDE IN USE
12MM WHEEL HANGER GUIDE IN USE
LT-750 Brake Rotor Clamp
The LT-750 secures the rotor to prevent it from being
knocked around and allowing rust and dirt to fall
between the hub and rotor. Each 3 inch jaw is
especially designed to firmly hold the brake rotor on
the hub while brake pads are being installed to the
caliper and the slides are being serviced. The center of
the clamp jaws are formed down towards each other
like teeth. The outsides are still pointing straight out
the front of the clamp. The teeth bite into the threads
of the lug nut stud on the hub while the outside points
hold the rotor firmly in place.
LT-4000 Deluxe Hubcap &
Wheel Lock Removal Kit
The LT-4000 safely removes and replaces GM, Ford,
and Chrysler wire wheel hubcap locks on 1978-1997
vehicles. This kit also removes factory and most after
market mag wheel locking nut locks. NOW INCLUDES
the LT4200A Dual Sided Twist Socket Lug Nut
Remover. Includes instructions and is packaged in a
custom carrying case.
LT4875, LT4875A, LT4876 & LT4876A
Lug Nut Removal Flip Sockets
These Lug Nut Removal Flip Sockets are for the easy
removal of lug nuts. The thin wall flip sockets allow for
removal of lug nuts on specialty wheels and tight
tolerances. Individually packaged.
Individual Lug Nut Flip Sockets:
LT4875
3/4”, 19mm; 13/16”
LT4875A
3/4”, 19mm; 13/16”, THIN WALLED
LT4876
19mm; 21mm
LT4876A
19mm; 21mm, THIN WALLED
6
LT-760 Brake Shoe Adjuster
Pin Installer
The LT-760 quickly and safely press all 3
sizes of brake shoe adjuster lever posts into
the brake shoes (using an air hammer). The
narrow tapered end of the tool will easily
clear the bent over webbing found on most
brake shoes. A real time saver.
TORQUE SOCKETS
Wheel Torque Master Sockets will torque wheel
nuts to the correct torque the first time, every time,
on most makes and models of Foreign & Domestic
cars, light trucks, SUV’s and vans. Torque Master
Sockets are easy to use and are color coded for
quick identification. Using a torque socket avoids
over-torquing wheel
nuts and prevents
Major wheel and
Brake damage.
These tools are
designed for use
with a ½” drive
Torque Master Sockets used with
your ½” drive impact wrench
impact wrench.
BROWN
LEMON GREEN
ORANGE
TURQUOISE
GRAY
PINK
BLACK
SKY BLUE
BLUE
SAFETY PURPLE
YELLOW
RED
BEIGE
EVERGREEN
LIGHT ORANGE
WHITE
TAN
PURPLE
APPLE GREEN
BUBBLE GUM
GOLD
NEON GREEN
AQUA
SALMON
LIGHT BLUE
SILVER
LIME GREEN
MAROON
COPPER
VANILLA
NAVY BLUE
LT1500A
LT1500AA
LT1500B
LT1500BB
LT1500C
LT1500CC
LT1500D
LT1500DD
LT1500E
LT1500EE
LT1500F
LT1500G
LT1500GG
LT1500H
LT1500HH
LT1500I
LT1500J
LT1500K
LT1500L
LT1500LL
LT1500NN
LT1500OO
LT1500Q
LT1500QQ
LT1500S
LT1500SS
LT1500TT
LT1500V
LT1500VV
LT1500XX
LT1500Y
13/16” - 100 Ft/Lbs., 135 N.M.
22mm - 80 Ft/Lbs., 110 N.M.
21mm - 80 Ft/Lbs., 110 N.M
21mm - 150 Ft/Lbs., 200 N.M.
3/4”/19mm - 100 Ft/Lbs., 135 N.M.
17mm - 90 Ft/Lbs., 120 N.M.
21mm - 60 Ft/Lbs., 80 N.M.
21mm - 100 Ft/Lbs., 135 N.M.
3/4”/19mm - 80 Ft/Lbs., 110 N.M.
22mm - 140 Ft/Lbs., 190 N.M.
3/4”/19mm - 65 Ft/Lbs., 90 N.M.
17mm - 80 Ft/Lbs., 110 N.M.
1 1/16” - 80 Ft/Lbs., 110 N.M.
17mm - 45 Ft/Lbs., 75 N.M.
1 1/16” - 100 Ft/Lbs., 135 N.M.
7/8” - 120 Ft/Lbs., 160 N.M.
1” - 140 Ft/Lbs., 190 N.M.
17mm - 110 Ft/Lbs., 150 N.M.
1” - 170 Ft/Lbs., 230 N.M.
22mm - 175 Ft/Lbs., 235 N.M.
3/4”/19mm - 90 Ft/Lbs., 120 N.M.
13/16” - 75 Ft/Lbs., 100 N.M.
7/8” - 140 Ft/Lbs., 190 N.M.
22mm - 95 Ft/Lbs., 130 N.M.
3/4”/19mm - 55 Ft/Lbs., 75 N.M.
21mm - 110 Ft/Lbs., 150 N.M.
15/16” - 135 Ft/Lbs., 175 N.M.
1-1/16” - 140 Ft/Lbs., 190 N.M.
22mm - 110 Ft/Lbs., 150 N.M.
13/16” - 160 Ft/Lbs., 220 N.M.
7/8” - 100 Ft/Lbs., 135 N.M.
LT-1500-LWC Wheel Torque Socket Laminated Wall Chart
The 28.25” x 28.25” Laminated Wheel Torque Chart is a must for any high volume tire or
brake shop using Torque Master sockets. Easily allows many mechanics to quickly verify
wheel torque values from a distance. Fully updated every year and includes 31 color coded
Torque Master Socket specs and the thousands of vehicles that they work on.
LT-1500WC Wheel Torque Socket Color Wall Chart
The 14” x 14” Wheel Torque Socket Color Chart is a must for any high volume tire or brake shop using Wheel
Torque Master Sockets. Small size of chart allows you to store chart in a tool box or at a service bay. Fully updated
every year and includes 31 color coded Wheel Torque Master Socket specs and the thousands of vehicles that they
work on.
LT-1400WC Wheel Torque Extension Color Wall Chart
The 14” x 13.25” Wheel Torque Extension Color Chart is a must for any high volume tire or brake shop using Wheel
Torque Extensions. Small size of chart allows you to store chart in a tool box or at a service bay. Fully updated every
year and includes 7 color coded Wheel Torque Extension specs and the thousands of vehicles that they work on.
7
LT1500
8 Piece Wheel Torque Master Kit
LT1510
10 Piece Wheel Torque Master Kit
The LT1500 is an 8 piece Wheel Torque Master Kit.
These tools are designed for use with a ½” drive impact
wrench and come in a custom molded case with a yearly
updated color wall chart (LT-1500WC). NOW MORE
VERSATILE. (Includes sockets A, B, C, E, F, G, I & Q)
The LT1510 is a 10 piece Wheel Torque Master Kit. These
tools are designed for use with a ½” drive impact wrench
and come in a custom molded case with a yearly updated
color wall chart (LT-1500WC). NOW MORE VERSATILE.
(Includes sockets A, B, BB, C, E, F, G, I, K & Q)
LT1550 4 Piece Domestic
Wheel Torque Master Kit
LT1560 4 Piece Light Truck & SUV
Wheel Torque Master Kit
The LT1550 is a 4 piece
Domestic Wheel Torque
Master Kit. These tools are
designed for use with a ½”
drive impact wrench and
come in a custom molded
case with a yearly updated
color wall chart (LT-1500WC).
(Includes sockets A, C, E, & I)
The LT1560 is a 4 piece SUV, Light
Truck & Van Wheel Torque Master
Kit. Sockets are deep well forged to
accommodate light trucks, SUV’s
and vans. These tools are designed
for use with a ½” impact wrench
and come in a custom molded case
with a yearly updated color wall
chart (LT-1500WC).
(Includes sockets BB, I, Y & Q)
LT1590 & LT1593 9 Piece Wheel Torque Master Kits
The LT1590 & LT1593 are 9 piece Wheel Torque
Master Kits. These tools are designed for use with
a ½" drive impact wrench. These kits come with a
yearly updated color wall chart (LT-1500WC) and
are available with a custom rack (LT1590) or with a
custom case (LT1593). NOW MORE VERSATILE.
(Includes sockets A, B, BB, C, E, F, G, I & Q)
LT1595 12 Piece Wheel Torque Master Kit
The LT1595 is a 12 piece Wheel Torque Master Kit. This is
our most complete kit available today. These tools are
designed for use with a ½" drive impact wrench and come
in a wall mountable carrying case with a yearly updated
color wall chart (LT-1500WC). NOW MORE VERSATILE.
(Includes sockets A, B, BB, C, DD, E, F, G, I, K, Q & TT)
8
TORQUE EXTENSIONS
The ½" Drive Wheel Torque Extensions will torque
wheel nuts on most foreign and domestic cars and
light trucks to the correct torque, the first time, every
time, with your thin wall or regular lug nut sockets.
Since more vehicles every year have tight tolerances
around the wheel nuts, this kit will help eliminate
damage to wheels when torquing the wheel nuts.
NEW
Torque Extensions used with
your ½” drive impact wrench
and lug nut sockets
ORANGE
GRAY
BLUE
YELLOW
WHITE
PURPLE
AQUA
LT1400BB - 160 Ft/Lbs., 215 N.M.
LT1400C - 100 Ft/Lbs. , 135 N.M.
LT1400E - 80 Ft/Lbs., 110 N.M.
LT1400F - 65 Ft/Lbs., 90 N.M.
LT1400I - 120 Ft/Lbs., 160 N.M.
LT1400K - 110 Ft/Lbs., 150 N.M.
LT1400Q - 140 Ft/Lbs., 190 N.M.
LT1450 ½” Drive 4 Piece Wheel Torque
Extension Kit
LT1460 & LT1465
½” Drive Wheel Torque Extension Kits
The 4 piece extension kit does the work of 9 regular
torque sockets. The 4 piece kit includes extensions C, E,
F & I and comes in a custom molded carrying case with a
yearly updated color wall chart (LT-1400WC).
The 5 piece extension kit does the work of 13 regular
torque sockets. The 5 piece kit includes extensions C, E,
F, I & Q, a yearly updated color wall chart (LT-1400WC)
and is available with a custom molded carrying case
(LT1460) or a rack (LT1465).
LT1470 ½” Drive 7 Piece Wheel
Torque Extension Kit
LT1490 ½” Drive 9 Piece Extension
& Thin Wall Socket Kit
The 7 piece extension kit does the work of 16 regular
torque sockets. The 7 piece kit includes extensions BB, C,
E, F, I, K & Q and comes in a custom molded carrying case
with a yearly updated color wall chart (LT-1400WC).
The LT1490 is a 9 piece ½”Drive Torque Extension &
Thin Wall Socket Set. These tools are designed for use
with a ½”drive impact wrench and come in a custom
molded carrying case with a yearly updated wall chart
(LT-1400WC). Includes the 4 extensions and the 5 thin
wall sockets listed below.
EXTENSIONS
LT1400F
Yellow 65 Ft/Lbs., 90 N.N.
LT1400E
Blue 80 Ft/Lbs., 110 N.M.
LT1400C
Gray 100 Ft/Lbs., 135 N.M.
LT1400I
White 120 Ft/Lbs., 160 N.M.
THIN WALL SOCKETS
LT1490A
17mm thin wall socket
LT1490B
13/16” thin wall socket
LT1490C
19mm thin wall socket
LT1490D
21mm thin wall socket
LT1490E
7/8” this wall socket
9
LT1600B, M, N, O, P, R, S, T, U, W & Y
Heavy Duty 3/4" & 1" Drive Wheel Truck Extensions
These heavy duty truck extensions are designed to work with a 3/4” or
1” drive impact gun and your lug nut sockets on large truck wheel nuts.
3/4” Drive Truck Extensions:
LT1600O - 175 Ft/Lbs., LT1600N - 250 Ft/Lbs.,
LT1600U - 350 Ft/Lbs., LT1600M - 475 Ft/Lbs.,
1” Drive Truck Extensions:
LT1600T - 175 Ft/Lbs., LT1600R - 250 Ft/Lbs.,
LT1600S - 350 Ft/Lbs., LT1600B - 400 Ft/Lbs.,
LT1600P - 475 Ft/Lbs., LT1600Y - 550 Ft/Lbs.,
LT1600W - 650 Ft/Lbs.
TWIST SOCKETS
Twist Sockets have a fluted design which give the sockets a tight grip to
remove the most difficult fasteners. Simply place the twist socket on and twist
the damaged fastener off - it’s that easy. No more pounding, chisels or
torches. Safe and fast removal of damaged fasteners and easy removal of the
fastener from the twist socket. Available in 3/8” & ½” drive sizes.
6 flute
12 flute
LT 4500, LT 4501 3/8” Drive 9 Piece Twist Socket Fastener Removal Systems
This kit easily removes damaged
nuts, studs, pipe nipples and
bolts. Available mounted on a
3/8” rail (LT 4500) or a custom
molded case (LT 4501).
LT 4510 10mm
LT 4511 11mm, 7/16”
LT 4512 12mm
LT 4513
LT 4514
LT 4515
13mm
14mm
15mm
LT 4516
LT 4517
LT 4519
16mm, 5/8”
17mm
19mm, 3/4”
LT 4600 3/8” Drive 13 Piece Twist Socket Fastener Removal System
This kit easily removes damaged
nuts, studs, pipe nipples and
bolts. Comes mounted on a
3/8” rail, individually packaged.
LT
LT
LT
LT
LT
4510
4511
4512
4513
4514
10mm
11mm, 7/16”
12mm
13mm
14mm
LT
LT
LT
LT
4515
4516
4517
4519
15mm
16mm, 5/8”
17mm
19mm, 3/4”
LT
LT
LT
LT
4620
4621
4622
4623
3/8”
½”
9/16”
11/16”
LT 4700 3/8” Drive DEEP WELL
13 Piece Twist Socket Damaged Fastener Removal System
This kit easily removes damaged
nuts, studs, pipe nipples and bolts.
Ideal for times when a deep well
socket is needed. Comes mounted
on a 3/8” rail, individually packaged.
10
LT 4510-D
LT 4511-D
LT 4512-D
LT 4513-D
LT 4514-D
10mm
11mm, 7/16”
12mm
13mm
14mm
LT 4515-D
LT 4516-D
LT 4517-D
LT 4519-D
15mm
16mm, 5/8”
17mm
19mm, 3/4”
LT 4620-D
LT 4621-D
LT 4622-D
LT 4623-D
3/8”
½”
9/16”
11/16”
LT 4800 3/8” Drive 7 Piece Twist Socket
Oil Drain Plug Removal System
This system easily removes the
most commonly used damaged oil
drain plugs. Comes mounted on a
3/8” rail, individually packaged.
LT 4513
LT 4515
LT 4516
LT 4517
LT 4519
LT 4622
LT 4822
13mm
15mm
16mm, 5/8”
17mm
19mm, 3/4”
9/16”
22mm
LT 4400 ½” Drive 6 Piece
Twist Socket Removal Kit
This kit easily removes damaged
nuts, studs, pipe nipples and
bolts. Comes mounted on a ½”
rail, individually packaged.
LT 4400-30
LT 4400-35
LT 4400-40
LT 4400-45
LT 4400-50
LT-400-7
19mm, 3/4”
13/16”
7/8”
15/16”
1”
Extractor Punch
LT 4850 3/8” Drive 3 Piece Twist Socket
Transmission Drain Plug
Removal System
LT 4510 10mm
LT 4621 ½”
LT 4851 8mm
This system easily removes the
most commonly used damaged
transmission pan bolts. Comes
mounted on a 3/8” rail,
individually packaged.
LT 4240 ½” Drive 5 Pc. Locking Lug Nut
Twist Socket Removal Kit
Removes locked or damaged lug nuts without a key.
Now 4 sizes for maximum coverage. Lug nuts are usually
reusable. Works with a breaker bar or other related tool.
Comes mounted on a ½”rail, individually packaged.
LT 4400-30
LT 4400-35
LT 4400-50
LT 4400-70
LT-400-7
19mm, 3/4”
13/16”
1”
1 3/16”
Extractor Punch
LT 4300 3 Piece Twist Socket Lug Nut Removal System
The LT 4300 3 piece Twist Socket Lug Nut Removal System is for the removal of DAMAGED/ROUNDED
3/4"/19mm, 13/16", and 21mm lug nuts (LT4200A) and the majority of OEM and after market LOCKING
LUG NUTS (LT400-25). These sockets are dual sided. Works with a breaker bar or other related tool.
Includes an extractor punch (LT-400-7).
LT 4350 4 Piece Twist Socket Lug Nut Removal System
Removes DAMAGED/ROUNDED 3/4” & 19mm, 13/16”, and 21mm lug nuts (LT4200A). Removes the
majority of OEM and aftermarket LOCKING LUG NUTS (LT400-25). Removes DAMAGED/ROUNDED
17mm lug nuts and OEM and aftermarket LOCKING LUG NUTS (LT400-17). These sockets are DUAL
SIDED. Works with a breaker bar or other related tool. Includes an extractor punch (LT-400-7).
LT4200A Dual Sided Twist Socket Lug Nut Remover
The Dual Sided Twist Socket Lug Nut Remover is for the removal of damaged/rounded 3/4” & 19mm, 13/16", and
21mm lug nuts because of unsuccessful removal, rust or other damage. Works with a breaker bar or other related tool.
LT400-17 Dual Sided Twist Socket Lug Nut Remover
The Dual Sided Twist Socket Remover is for the removal of DAMAGED/ROUNDED 17mm lug nuts
and OEM and after market LOCKING LUG NUTS. Works with a breaker bar or other related tool.
LT400-25 Dual Sided Twist Socket Locking Lug Nut Remover
The Dual Sided Twist Socket Lug Nut Remover is for the removal of 3/4” & 19mm, 13/16”, and
21mm OEM and after market locking lug nuts. Works with a breaker bar or other related tool.
LT400-27 7/8” - 1” 6 Fluted Twist Socket
LT400-29 7/8” - 1” 12 Fluted Twist Socket
These 6 & 12 fluted twist sockets easily remove 7/8” and 1” damaged OEM &
locking aftermarket lug nuts. Works with a breaker bar or other related tool.
11
LOCKOUT KITS
LT-1000 Supreme Master
Automotive Lock Out Kit
LT-500 Grand Master
Automotive Lock Out Kit
The Supreme Master Auto Lock Out Tool Kit
contains 18 pieces and is the ultimate product
available today to handle emergency lock outs.
This kit is packaged in a custom heavy duty blow
molded carrying case with vinyl inserts, and
includes a fully illustrated instruction manual.
The LT-1000 includes model no.'s: 40, 80A, 95,
99, 100, 101, 105, 106, 108, 110, 112, 113, 114,
116, 120, 2-271’s, 275.
The Grand Master is a comprehensive 14 piece
automotive lock out tool kit. It has been
updated to include new specialty tools. This kit
includes a fully illustrated instruction manual and
comes in a heavy duty vinyl carrying case.
The LT-500 includes model no.'s: 40, 80A, 95,
100, 101, 105, 106, 108, 112, 114, 118-1,
118-2, 2-271’s.
275
LT-450 Deluxe Master
Automotive Lock Out Kit
LT-200 Mini Master
Automotive Lock Out Kit
The Mini Master is the most comprehensive
low cost kit available. Eliminates automotive
lock out problems in emergency situations. This
9 piece tool kit unlocks most domestic and
foreign cars and trucks on the road today. This
kit includes a fully illustrated instruction manual
and comes in a heavy duty vinyl carrying case.
The LT-200 includes model no.'s: 40, 80A, 95,
100, 101, 105, 106, 114, 271.
The Deluxe Master includes the Lock Tech Tool
(LT108) and is a great value. Eliminates automotive
lock out problems in emergency situations. This 11
piece tool kit unlocks most domestic and foreign
cars and trucks on the road today. This kit
includes a fully illustrated instruction manual and
comes in a heavy duty vinyl carrying case.
The LT-450 includes model no.'s: 40, 80A, 95,
100, 101, 105, 106, 108, 114, 2-271’s.
105
80A
105
80A
40
108
271
106
40
106
100
101
101
100
95
95
271
114
12
114
LT-125 Easy Access Door Unlocking Kit
The LT-125 is dual sided - two tools in one - 54” long.
Whale tail tip design tips places more working tip on
lock surfaces. Grabs and catches lock more easily. Use
with or without vinyl tips. Easy Access Door Unlocking
Tool, two Plastic Door Wedges (LT271), and Plastic
Slip Jim (LT-100). Comes packaged in a custom kraft
cardboard box. Whale tail tip design is Patent Pending.
LT-130 Easy Access Door
Unlocking System
The LT-130 is dual sided - two tools in one - 54” long.
Whale tail tip design tips places more working tip on
lock surfaces. Grabs and catches lock more easily. Use
with or without vinyl tips. Easy Access Door Unlocking
Tool, two Plastic Door Wedges (LT271), Inflate-AWedgeTM (LT275) and Plastic Slip Jim (LT-100). Comes
packaged in a custom kraft cardboard box. Whale tail
tip design is Patent Pending.
WHALE TAIL TIPS
NEW & IMPROVED
NEW &
IMPROVED
WHALE TAIL TIPS UP-CLOSE
LT140 2 Piece Easy Access &
Inflate-A-WedgeTM Kit
LT135 2 Piece Easy Access Kit
The LT135 is a 2 piece Easy Access Tool that collapses
for easy storage. It is 53”long with a rigid design for
easy through the window reach. The LT135-3B now
has whale tail tip design for more working tip on lock
surfaces. Use with or without vinyl tips. Comes in a
heavy duty bag. This kit also includes Plastic Slip Jim
(LT-100) and two Plastic Door Wedges (LT271).
WHALE TAIL TIPS
NEW & IMPROVED
135-3A
135-3B
The LT140 is a 2 piece Easy Access Tool that collapses
for easy storage. It is 53”long with a rigid design for
easy through the window reach. The LT135-3B now
has whale tail tip design tips for more working tip
on lock surfaces. Use with or without the vinyl tips.
Comes in a heavy duty vinyl bag. This kit also
includes Plastic Slip Jim (LT-100), two Plastic Door
Wedges (LT271) and Inflate-A-WedgeTM (LT275).
WHALE TAIL TIPS
NEW & IMPROVED
135-3A
135-3B
LT145 Super Multi-Purpose Easy Access
& Inflate-A-WedgeTM Kit
The LT145 is a 4 piece Easy Access Tool that collapses
for easy storage. This tool screws together WITHOUT
A COUPLER for easier access. The LT135-3B now has
whale tail tip design tips for more working tip on lock
surfaces. Use with or without vinyl tips. Includes a
middle extension piece (135-3D-1) to go across the
car for long reach applications. Also includes a shorter
tip (135-3C) for easier use with lock buttons. Rigid
design for easy through-the-window reach. This kit
also includes Plastic Slip Jim (LT-100), two Plastic Door
Wedges (LT271) and Inflate-A-WedgeTM (LT275).
NEW & IMPROVED
LT146 Quick Connect Lockout Kit
The LT146 has a super strong snap and lock design
that will not come apart during use. Fast quick
connections in tough lockout situations. The LT146-QB
& 146-QC now have whale tail tip design for more
working tip on lock surfaces. Adjustable 5 piece kit for
33” reach to an amazing 53” reach. This kit also
includes the Inflate-A-WedgeTM (LT275), Plastic Slip Jim
(LT-100) and two Plastic Door Wedges (LT271). Also
available is a 15” add-on extension - LT146-QD.
Patent Pending.
WHALE
TAIL
TIPS
NEW &
IMPROVED
146-QA
146-QB
146-QC
13
LT-260 6’ Super Jimmy &
Inflate-A-WedgeTM Kit
TM
This kit combines the Inflate-A-Wedge with the 6’
Super Jimmy for safe and quick opening of locked vehicle
doors. NOW includes the Plastic Slip Jim (LT-100).
LT271 Plastic Door Wedge
Dual use. Safely separates the door panel from the
vehicle window. Holds door window
during window regulator work.
LT275 Inflate-A-WedgeTM
The unique Inflate-A-WedgeTM allows you to safely
separate the door frame from the vehicle body to
insert a tool and unlock a vehicle.
in use
LT-270 6’ Super Jimmy Kit
The Super Jimmy allows you to open the vehicle with the
door handle, lock button or the electric lock switch.
OPENS MOST VEHICLES. No disconnection of linkage or
airbag activation problems. Comes with 2 plastic wedges
(LT271) for safe easy use. The Super Jimmy easily bends
to fit every vehicle design and breaks down for easy
storage. NOW includes the Plastic Slip Jim (LT-100).
LT276 Self Locking Door Wedge
The washboard design surface of wedge self locks in
door. Will not slide out of door during unlocking. Great
when inserting inflatable air wedges. Extra wide for extra
leverage. Use it with or without on air wedge. Great for
window regulator installation. Holds glass steady against
window rubber stripping.
in use
LOCKOUT PICKS
LT-290 European & Asian
Rocker Lock Pick Set
LT-310 Chrysler Automotive Rocker
Lock Pick Set
A six piece set of rocker picks
designed for European and
Japanese vehicles. Not for
use on transponder based
anti-theft ignition systems.
A six piece pick set will
open door & trunk locks
and start Chrysler vehicles
from 1969-1999, including
tilt columns. Not for use
with the Smart Key antitheft ignition systems.
LT-300 Ford Automotive Rocker
Lock Pick Set
A five piece pick set opens door
and trunk locks of Ford, Lincoln
and Mercury cars, vans &
trucks for model years 19691999. To start ignitions with
10-cut locks (1984 ½ - 1996)
see the LT-78 on page 16. Not
for use on transponder based
passive anti-theft systems.
14
LT-320 European & Asian Automotive
Lock Pick Set
A six piece set designed for
foreign wafer locks found in
most Japanese and European
vehicles. Includes Harpoon
pick to remove broken keys
from auto locks. Not for use
on transponder based antitheft ignition systems.
LT-620 Grand Master Lock Pick Set
LT-340A AutoMaster Super Lock Pick Set
The ultimate pick set containing 35 picks,
including the LT-280, LT-290, LT-300, LT-310,
LT-320, as well as the LT-330 tension wrench and
LT-106 gas cap pick tool packaged in a custom
leatherette case.
A complete master pick set containing 23 picks,
including the LT-290, LT-300, LT-310, LT-320, as well as
the LT-330 tension wrench and LT-106 gas cap pick
tool packaged in a custom leatherette case.
LT-280 GM Rocker Lock Pick Set
LT-340 Master Lock Pick Set
A complete pick set containing 17 picks, including the
LT-300, LT-310, LT-320, as well as the LT-330 tension
wrench and LT-106 gas cap pick tool packaged in a
custom leatherette case.
The GM Rocker Lock Pick Set consists of twelve double
ended, single sided rocker picks. This creates 24
combinations covering the one-thousand plus possible
key cut configurations for GM side bar locks.
The LT-280 will work on many GM steering column,
trunk and door locks. Not for use with 10-cut ignitions
or ignition systems equipped with PassKey.
MISCELLANEOUS
LT-230 Magnetic Nut Holder
LT-840 Air Hammer Wrench Driver
The LT-230 Magnetic Nut Holder has a flexible stainless
steel body with pivoting magnetic head to reduce the
risk of losing hard to reach nuts. Clips onto open and
box end wrenches. The LT-230 Magnetic Nut Holder
fits 3/8" - 3/4" and 10mm - 19mm wrenches. Also
available in 12 pack display (LT-230-12).
Use your air hammer to drive your wrenches in difficult
and hard to reach areas. Long reach - 19 ½”. Fits any
wrench. Use on crank pulley bolts, fan clutches, and
any inaccessible bolt or fastener. New and improved
with no welding. Fully machined from bar stock steel.
NEW &
IMPROVED
in use
wrench & air hammer not included
15
LT2650 Transmission Popper
LT598 5 Piece SAE Shockit Socket Kit
The LT2650 shifts transmissions into neutral from
under hood with no key. Use pry bar fork end to
separate transmission shift cable from transmission
selector gear. Slide hole on end of pry bar over shift
cable retaining pin on transmission selector gear to
move selector gear into NEUTRAL position. Two tools
in one - use fork end of tool to pop out body panel
grommets. Great for moving or towing vehicles with
no key. Must have tool for auto recovery. 24” long
with angled tip for easy operation
Shock loose frozen nuts and bolts. Ideal for hard to
reach situations. Custom design, punch/chisel included.
Custom punch delivers 100% of shock force to the
nut/bolt head. Magnetic socket storage rail included.
Includes 5 popular SAE sizes 3/4”
11/16”
5/8”
9/16”
½”
NEW PRODUCT
LT599 9 Piece Metric Shockit Socket Kit
The LT599 will shock loose frozen nuts and bolts. Ideal
for hard to reach work areas. Custom punch designed
for air hammer use. Packaged in a custom see-through
blow molded case. Includes 9 popular metric sizes
LT265 Dual Sided Universal Oil Cap
Removal Tool
SEE THRU CASE
Oil caps on Toyota, Nissan, Hyundai and many imports
are made of plastic and are the most difficult to remove.
Easily removes oil caps without damaging them. Slotted
end fits Toyota and most single fin caps. Double prong
side fits into slotted notched sides of Nissan caps. Use it
every day checking and changing oil.
LT735 Chrysler/Dodge Minivan Universal
Joint Steering Shaft Assembly
Roll Pin Remover
DOUBLE PRONG SIDE IN USE
LT-720 Radiator Drain Plug Remover
Removes most GM, Foreign and other
domestic radiator drain plugs from plastic
radiators. The LT-720 radiator drain plug
remover easily does the job and can be
used with a 1/4" extension.
Works on all Chrysler/Dodge minivans plus most other
front wheel drive universal joint steering shaft assemblies
connected with a roll pin. Works with air impact chisel.
Magnetic tip aids in removal and insertion of roll pins.
Machined from hardened tool steel for years of service.
A must-have tool when doing Rack and Pinion Steering
Gear work.
LT730 Subaru Axle Pin Removal Tool
The LT730 removes and installs roll pins for easy axle removal. This tool has
a magnetized tip to help the roll pin from falling into hidden access areas
around axle. The magnetized tip holds new roll pin for easy alignment and
insertion into new axle. Works on all AWD Subaru trans-axle assemblies.
16
PATENT #7,036,211
ADDITIONAL PATENTS PENDING
LT855 Texas Twister Air Hammer Pulling Kit
Now you can convert your air hammer into a pneumatic slide hammer
with the Texas Twister. Simply snap the Texas Twister curved air bit
into the collet of your hammer with one of the bits attached. Reverse
the air hammer handle in your hand now using thumb to push the
hammer trigger. Feel the 3000 air hammer blows per minute tuning
into new pulling power. One hand operation allows you to hold parts
with your other hand. Safe controlled part removal without parts and
fluids crashing to the floor. Use 21st century air hammer pulling
power to get the job done SAFE, FAST & EFFICIENT instead of a slow,
manually powered 19th century slide hammer. Extend the reach of
the tool by using the 20” extension. NOW INCLUDES two NEW
puller connectors - ½-20 to 5/8” and ½”-20 to 3/4”to connect the
Texas Twister to your 5/8” & 3/4” slide hammer bits and pullers.
Comes packaged in a custom plastic tray with a custom black ballistic
nylon carrying case.
NEW PARTS & STORAGE TRAY ADDED
air hammer
not included
LT1800 4 Piece Offset Impact Driver Set
410, 530 & 725 drivers have a 15° offset angle for greater access in tight areas.
Recessed non-turning well head prevents driver slipping off stud or fastener.
990 straight 8” extra-long non-turning straight hammer head won’t rotate off
stud. Great for strut work, hub work, front end, exhaust, spring and suspension
repair. Comes packaged in a heavy duty roll-up cordura nylon storage bag.
Includes 410, 530, 725 & 990.
OFFSET IMPACT DRIVER IN USE
LT1810 2 Piece Offset Impact Driver Set
Our two most popular impact drivers. 725 has 15° offset machined recess well
head to remove and install hard to reach stud and bolts. 990 straight 8” extra-long
hammer head with non-turning slots won’t rotate off work area. Ideal for under
the car, struts, front end, exhaust, suspension and spring repair. Comes packaged
in a heavy duty roll-up cordura nylon storage bag. Includes 725 & 990.
Individual Impact Drivers:
410 - Offset Shaft Impact Driver
530 - Offset Shaft Impact Driver
LT1820 3 Piece Offset Impact Driver Set
990 straight 8” extra-long non-turning slotted air hammer. 990SHT 6” short
non-turning slotted air hammer. 725 offset .812 machined recessed well head
to remove/install hard to reach studs and bolts. Comes packaged in a heavy
duty roll-up cordura nylon storage bag. Includes 725, 990 & 990SHT.
725 - Offset Shaft Impact Driver
990 - Straight Shaft Impact Driver
990SHT - Short Straight Shaft Impact Driver
LT1830 2 Piece Non-Turning Hammer/Impact Hammer Driver Set
990 straight 8” long non-turning slotted air hammer and 990SHT straight 6” short
non-turning slotted air hammer. Non-turning machined slots won’t rotate off work
area. Comes packaged in a heavy duty roll-up cordura nylon storage bag.
Includes 990 & 990SHT.
17
LT991 Hollow End Line Taps
PROBLEM: A/C and hydraulic line fitting threads become
corroded over time and are damaged in disconnect
process requiring complete line removal to repair.
8 piece kit
covers all
popular sizes:
14MM
16MM
18MM
20MM
22MM
24MM
27MM
1 1/8”
SOLUTION: Hollow end line taps rethread female fittings
without line removal. Hollow end tap slides over flared
end of line easily, rethreading female connector.
Use on A/C, Brakes, Oil, Trans and heater lines and coils.
LT-860 Magnetic Rechargeable
Screwdriver Holster
LT998 Hose Clamp
Holds two rechargeable screwdrivers. Conveniently store
your rechargeable screwdrivers near work area at all
times. Securely mounts to any metal surface. Holds up
to two of any popular rechargeable screwdrivers. Readily
access your rechargeable screwdrivers at any time.
IN USE
PROBLEM: Most mechanics have hose clamp removal
tools. However, they don’t work if they can’t reach the
compression tips of the hose clamp. This occurs often
when the clamp is put on erratically at the factory or by
another mechanic.
SOLUTION: Our hose clamp pliers reach around the
hose to encapsulate the clamp compression tips. Our
tool allows the mechanic to easily rotate the clamp to a
position where he can now use his clamp removal tool
or remove clamp using our tool.
NEW & IMPROVED
HANDLE
LT-870 Magnetic Air Hose Holder
Holds 3/8” - ½” shop air hose. Attaches to any metal
surface close to work area. No more air hoses on floor
for car to run over. No more searching and reaching
for air hose. Great aid for retractable air hoses.
IN USE
in use
LT865 Spark Plug Piston Lock
The LT865 is a must have tool when servicing timing
belts and chains. This unique tool prevents the
crankshaft from shifting when servicing belts and
chains. Designed with a brass end to prevent damage
to the piston. Replace one spark plug with the spark
plug piston lock to lock up motor.
LT-910 Magnetic Impact Gun Holder
The LT-910 Magnetic Impact Gun Holder gives a
secure place to hold your ½” and smaller impact gun.
Use on a tool box or other flat ferrous steel surfaces
anywhere in the shop. The tubular design mounts
with a 160 pound magnetic force. Move it to where
you need it - always handy.
impact gun
not included
in use
18
LT-220 Convert-A-Chuck Kit
Convert your 3/8" and 1/4" air
ratchet to an angle head drill. Kit
includes both the 3/8" (LT-205)
and the 1/4” (LT-210) Jacobs
Chucks, chuck key (LT-215) and
a cordless screwdriver adapter
(LT-217). Uses include: drilling,
tapping, hole sawing, and stud
removal in tight areas. Also
available individually.
LT995 Timing Gear Pliers
LT740 Funnel Lok TM
The LT995 will allow mechanic to turn timing gear when
timing belt adjustment is needed. Aids in removal and
replacement of timing gears and serpentine belt pulleys.
Includes 6 sets of interchangeable composite inserts
which safely grip timing gear teeth. Each composite
insert now mounts and swivels on 2 pins located on
the head of wrench for a secure fit and greater grip.
Performs timing gear removal by preventing rotation of
timing gear sprocket while retaining nut or bolt are
removed. Prevents camshaft rotation during timing gear
removal eliminating valve/piston interference and
subsequent damage. Securely grips all serpentine belt
pulleys. US Patent No. 7,077,036B1.
The Funnel Lok TM hands-free funnel holder is a simple,
yet revolutionary tool designed to hold any standardsize funnel firmly in place--making it easy to transfer
gasoline, oil, coolant, or any other fluids and powders
without slipping or spilling. Provides a stable “third
hand”. Shaped like a pair of pliers with spring torque
action, the Funnel LokTM features four stabilizing prongs
that can be inserted into any container or tank opening
from 1 ¼” to 2 ¼” in size. This creates a steady base
for the funnel to be held securely in place by the
adjustable rings. Made of durable ABS material. Allows
the air to vent, which eliminates the risk of blow back.
It not only prevents spills of potentially hazardous
chemicals, but its hands-free design allows containers
to fully drain.
LT940 Gas Tank Fuel Pump Removal Tool
This tool removes plastic fuel pump retaining rings. Universal
adjustable design fits most plastic retaining rings. Increased length
of ears and slots in ears allow for wider application for more
secure fit when grabbing teeth around fuel pump retaining
rings. Prevents damage to original retaining ring. Use with a ½”
drive extension and ratchet. Use to re-install old retaining ring.
ratchet & extension
not included
PAINT & BODY
LT-800 Inflatable Dent Remover - 2 pieces
The LT-800 Inflatable Dent Remover uses hand pumped air pressure to push dents out
from the inside of door and fender panels. Comes in 2 sizes: The LT-805 (8" x 8" Square
Inflatable Dent Remover) is for removing dents in tight corners or along welded seams
and panel edges. The LT-810 (14" x 8" Oblong Inflatable Dent Remover) is for longer
more accessible large dents. Each bag has 5 feet of air hose with oversize hand pump
bulb for long reach. Perfect for paintless auto body repair. Universal applications for all
automotive and truck door and body panel repair. Eliminate high points caused by body
slide hammers and picks. Pushes dents out to their normal shape eliminating excessive
bondo and sanding work. A real material and time saver.
LT-250 Wet Sanding Block System
The LT-250 eliminates water buckets and hoses when wet sanding vehicles at your
body shop. Utilizes 25 feet of plastic hose and has its own water regulator valve to
control water flow. Fast, easy clean-up reduces mess on or around the vehicle. Hooks
up to any standard water faucet or spigot.
19
LT-900 Magnetic Spray Gun Holder
The LT-900 Magnetic Spray Gun Holder will hold any cup or gravity fed spray gun without
creating holes in your spray booth. The tubular design mounts to any flat steel surface with a
160 lb. magnetic force. The LT-900 is totally portable - hang it anywhere, move it any time
and keep your spray booth brand new and hole free. Not just for spray booths. The LT- 900 is
an all purpose magnetic holder for use on your tool box or anywhere else in the shop.
LT790 Shape TipTM Tool
in use
The LT790 is designed to fit securely on most pry bars. Use to roll out high
spots, creases and crowns around dents. Accurately roll and massage out dents
and distortions without leaving tool marks. Excellent for use with today’s thin
alloy metal. Great for applying tape seam sealer. Repair bumpers, glue
upholstery and patch tires. Patent pending.
LT820 Paintless Dent Remover System
Affordable - a fraction of the price of current PDR sets.
Easy to master – training DVD included. Stainless steel
solid rod construction with EDM lockable swivel tips.
A breakthrough in PDR technology. Thirteen
interchangeable stainless and plastic tips - swivel head
action. Replaces hundred plus obsolete PDR tools.
Magnetic reflector board included. Add PDR profit
center to any automotive repair center. You don’t have
to be an auto body man to do PDR. See it work on
our web site. US Patent No. 6,543,270.
LT825D Roller Rod Paintless Dent
Removal Kit
The LT825D is the leader in roller rod paintless dent
removal technology. Finally a PDR kit made easy for you
to master. Includes seven interchangeable tips and five
stainless steel rods for over 35 rod & tip combinations.
Includes a get started training DVD. All 13 pieces fit in a
durable custom blow molded black carrying case. This
kit will make a new PDR profit center for any auto tech.
LT825-AA
LT825-BB
820-6AB
6-P
8-P
2-P
7-P
5-P
4-P
820-5AB
LT825-CC
3-P
LT825-DD
1-P
2
3
4
1
5
LT825-EE
820-7
820-19
820-P
LT825-TIP-1
LT825-MKA
reflector
board
LT825-TIP-2
LT825-MKB
interchangeable
swivel tips
up close
LT825-TIP-3
LT825-MKC
LT825-TIP-4
LT825-13
20
LT825-14
LTI TOOLS HAS AN AWARDS AND ROYALTY PROGRAM FOR YOUR NEW HAND TOOL IDEAS.
WE OFFER YOU INTERNATIONAL DISTRIBUTION.
IF YOU HAVE A NEW PRODUCT IDEA, PLEASE CONTACT US.
2/18
Download PDF
Similar pages