QuickSpecs
HP 1410 Switch series
Overview
HP 1410 Switch series
Models
HP 1410-8G Switch
HP 1410-16G Switch
HP 1410-24G-R Switch
HP 1410-24G Switch
HP 1410-8 Switch
HP 1410-16 Switch
HP 1410-24 Switch
HP 1410-24-R Switch
HP 1410-24-2G Switch
J9559A
J9560A
JG708A
J9561A
J9661A
J9662A
J9663A
JD986B
J9664A
Key features





Unmanaged Gigabit Ethernet and Fast Ethernet switches
Green features for low power consumption
Fan-less design for silent operation
QoS support
Limited Lifetime warranty
Product overview
The HP 1410 Switch Series comprises unmanaged Gigabit Ethernet and Fast Ethernet switches, designed for small businesses
looking for entry-level low-cost networking solutions that come with a limited lifetime warranty. The series consists of nine
models with flexible mounting options to meet different network switching needs. All models have quality of service (QoS)
support and IEEE 802.3x flow control features that provide outstanding data efficiency.
Simplified plug-and-play convenience is enabled by features such as auto-MDIX and autospeed negotiation. HP has innovated and
combined the latest advances in silicon technology to bring you some of the most power-efficient switches—1410-24G-R, 141016, and 1410-24 models are advanced IEEE 802.3az-compliant unmanaged Gigabit and Fast Ethernet switches. The switches
come with built-in green features and a limited lifetime warranty, making the series the right choice for organizations seeking a
networking solution that's both economical and reliable.
Features and benefits
Quality of Service (QoS)


IEEE 802.1p prioritization
delivers data to devices based on the priority and type of traffic
DiffServ Code Point (DSCP) support
allows real-time traffic prioritization based on Layer 3 TOS/DSCP parameters
Connectivity

Auto-MDIX
provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
Performance

NEW Energy-efficient Ethernet support
supports new IEEE 802.3az standard; allows lower power consumption when operated with IEEE-compliant client devices
in
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 1
QuickSpecs
HP 1410 Switch series
Overview



100 Mb/s mode only (JG708A, J9662A and J9663A switches)
Half-/full-duplex auto-negotiating capability on every port
doubles the throughput of every port
NEW Jumbo frame support
allows frames up to 9216 bytes to be switched through the network (Gigabit Ethernet models)
Mini jumbo frame support
allows frames up to 2048 bytes to be switched through the network, which supports large data transfers (J9662A and
J9663A switches)
Ease of use




Unmanaged
provides plug-and-play simplicity
Comprehensive LED display with per-port indicators
provides an at-a-glance view of status, activity, speed and full-duplex operation
Flow control
helps ensure reliable communications during full-duplex operation
Auto-speed negotiation
selects individual port speed automatically depending on client capabilities without the need for manual intervention,
allowing for simple plug-and-play operation
Flexibility


Fanless design
enables quiet operation for deployment in open spaces
NEW Internal power supply
provides operation convenience and a neat operation environment (JG708A, J9561A and JD986B switches)
Warranty and support


Limited Lifetime Warranty v2.0
Advance hardware replacement with next-business-day delivery (available in most countries). See
www.hp.com/networking/warrantysummary for duration details
Electronic and telephone support (for Limited Lifetime Warranty 2.0
limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours telephone
support is available from HP for the entire warranty period; to reach our support centers, refer to
www.hp.com/networking/contact-support; for details on the duration of support provided with your product purchase,
refer to www.hp.com/networking/warrantysummary
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 2
QuickSpecs
HP 1410 Switch series
Configuration
Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or RackShippable solution.
HP 1410-8G Switch
 8 autosensing 10/100/1000 ports
J9559A
See Configuration
Note:2
HP 1410-16G Switch
 16 autosensing 10/100/1000 ports
 1U - Height
J9560A
See Configuration
Note:2
HP 1410-24G-R Switch
 24 autosensing 10/100/1000 ports
 1U - Height
JG708A
See Configuration
Note:2
HP 1410-24G Switch
 22 autosensing 10/100/1000 ports
 2 dual-personality ports; either an RJ-45 10/100/1000 port or an open mini-GBIC slot
 1U - Height
J9561A
See Configuration
Note:1, 3
PDU Cable NA/MX/TW/JP
 C15 PDU Jumper Cord (NA/MX/TW/JP)
J9561A #B2B
PDU Cable ROW
 C15 PDU Jumper Cord (ROW)
J9561A #B2C
HP 1410-8 Switch
 8 autosensing 10/100 ports
J9661A
See Configuration
Note:2
HP 1410-16 Switch
 16 autosensing 10/100 ports
 1U - Height
J9662A
See Configuration
Note:2
HP 1410-24 Switch
 24 autosensing 10/100 ports
 1U - Height
J9663A
See Configuration
Note:2
HP 1410-24-R Switch
 24 autosensing 10/100 ports
JD986B
See Configuration
Note:2
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 3
QuickSpecs
HP 1410 Switch series
Configuration

1U - Height
HP 1410-24-2G Switch
 24 autosensing 10/100ports
 2 autosensing 10/100/1000 ports
 1U - Height
J9664A
See Configuration
Note:2
Configuration Rules:
Note 1
The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X111 100M SFP LC FX Transceiver
J4858C
J4859C
J9054C
Note 2
Localization required. (See Localization Menu for list.)
Note 3
Localization (Wall Power Cord) required on orders without #B2B or #B2C (PDU Power Cord). (See
Localization Menu)
Internal or External Power Supplies(Model Dependant)
Power supplies included
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Transceivers
SFP Transceivers
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X111 100M SFP LC FX Transceiver
J4858C
J4859C
J9054C
Cables
Multi-Mode Cables
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
Page 4
QuickSpecs
HP 1410 Switch series
Configuration
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
QK734A
QK735A
QK736A
QK737A
Page 5
QuickSpecs
HP 1410 Switch series
Technical Specifications
HP 1410-8G Switch (J9559A)
I/O ports and slots
8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T) Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
Supports a maximum of 8 autosensing 10/100/1000 ports
Dimensions
6.14(w) x 3.8(d) x 0.96(h) in (15.6 x 9.65 x 2.45 cm)
Weight
0.74 lb (0.34 kg)
Memory and processor
4 Kb EEPROM capacity; packet buffer size: 192 KB
Mounting and enclosure Wall, desktop, and under-table mounting
Performance
100 Mb Latency
< 3.6 µs (LIFO 64-byte packets)
1000 Mb Latency
< 1.2 µs (LIFO 64-byte packets)
Throughput
up to 11.9 Mpps (64-byte packets)
Switching capacity
16 Gbps
MAC address table size
4096 entries
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage
-40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage
15% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics Frequency
50/60 Hz
Maximum heat
41 BTU/hr (43.26 kJ/hr)
dissipation
Voltage
100 - 240 VAC
Current
1.0 A
Maximum power rating 12 W
Notes
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and
all modules populated.
Physical characteristics
Safety
Emissions
Immunity
The exact input voltage and frequency rating are determined by the
specific power adaptor part number ordered. Please select the correct
power adaptor country option.
CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950-1
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 6
QuickSpecs
HP 1410 Switch series
Technical Specifications
Services
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.
HP 1410-16G Switch (J9560A)
I/O ports and slots
16 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T) Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
Supports a maximum of 16 autosensing 10/100/1000 ports
Physical characteristics Dimensions
8.21(w) x 4.41(d) x 1.73(h) in (20.85 x 11.2 x 4.4 cm) (1U height)
Weight
1.43 lb (0.65 kg)
Memory and processor
512 Kb flash; packet buffer size: 512 KB
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack (hardware included); wall, desktop and under-table
mounting
Performance
100 Mb Latency
< 8.0 µs (LIFO 64-byte packets)
1000 Mb Latency
< 3.6 µs (LIFO 64-byte packets)
Throughput
up to 23.8 Mpps (64-byte packets)
Switching capacity
32 Gbps
MAC address table size
8192 entries
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage
-40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage
15% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics Frequency
50/60 Hz
Maximum heat
44 BTU/hr (46.42 kJ/hr)
dissipation
Voltage
100 - 240 VAC
Current
1.1 A
Maximum power rating 13 W
Notes
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and
all modules populated.
The exact input voltage and frequency rating are determined by the
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 7
QuickSpecs
HP 1410 Switch series
Technical Specifications
Safety
Emissions
Immunity
Services
specific power adaptor part number ordered. Please select the correct
power adaptor country option.
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.
HP 1410-24G-R Switch (JG708A)
I/O ports and slots
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T) Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
Supports a maximum of 24 autosensing 10/100/1000 ports
Physical characteristics Dimensions
17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm) (1U height)
Weight
6.61 lb (3 kg)
Memory and processor
1 MB flash; packet buffer size: 512 KB
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack (hardware included); desktop mounting
Performance
100 Mb Latency
< 8.0 µs (LIFO 64-byte packets)
1000 Mb Latency
< 3.6 µs (LIFO 64-byte packets)
Throughput
up to 35.7 Mpps (64-byte packets)
Switching capacity
48 Gbps
MAC address table size
8192 entries
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
5% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage
-40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage
5% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 16,404 ft (5 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics Frequency
50/60 Hz
Maximum heat
55 BTU/hr (58 kJ/hr)
dissipation
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 8
QuickSpecs
HP 1410 Switch series
Technical Specifications
Voltage
Current
Maximum power rating
Notes
Safety
Emissions
Immunity
Notes
Services
100 - 240 VAC
0.3 A
16 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged
in, and all modules populated.
This model provides internal power supply. Please select the correct power
cord country option.
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
IEEE 802.3az Energy Efficient Ethernet protocol is supported by the HP 1410-24G-R (JG708A), HP
1410-16 (J9662A) and HP 1410-24 (J9663A) Switches.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.
HP 1410-24G Switch (J9561A)
I/O ports and slots
22 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T) Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
2 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type
10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab 1000BASE-T Gigabit Ethernet) or an open
mini-GBIC slot (for use with mini-GBIC transceivers)
Supports a maximum of 24 Gigabit Ethernet ports
Physical characteristics Dimensions
13.23(w) x 6.65(d) x 1.73(h) in (33.6 x 16.9 x 4.4 cm) (1U height)
Weight
2.98 lb (1.35 kg)
Memory and processor
512 Kb flash; packet buffer size: 512 KB
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack (hardware included); wall, desktop and under-table
mounting
Performance
100 Mb Latency
< 8.0 µs (LIFO 64-byte packets)
1000 Mb Latency
< 3.6 µs (LIFO 64-byte packets)
Throughput
up to 35.7 Kpps (64-byte packets)
Switching capacity
48 Gbps
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 9
QuickSpecs
HP 1410 Switch series
Technical Specifications
MAC address table size
Environment
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
Electrical characteristics Frequency
Maximum heat
dissipation
AC Voltage
Current
Maximum power rating
Notes
Safety
Emissions
Immunity
Notes
Services
8192 entries
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft (3 km)
Power: 0 dB No fan
50/60 Hz
75 BTU/hr (79.13 kJ/hr)
100 - 127 / 200 - 240 VAC
0.3/0.2 A
22 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and
all modules populated.&lt;br&gt;This model provides internal power
supply. Please select the correct power cord country option.
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Use only supported genuine HP mini-GBICs with your switch.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.
HP 1410-8 Switch (J9661A)
I/O ports and slots
8 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX) Duplex:
half or full
Physical characteristics
Supports a maximum of 8 autosensing 10/100 ports
Dimensions
6.14(w) x 3.74(d) x 0.97(h) in (15.6 x 9.5 x 2.46 cm)
Weight
0.74 lb (0.34 kg)
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 10
QuickSpecs
HP 1410 Switch series
Technical Specifications
Memory and processor
Mounting and enclosure
Performance
16 Kb EEPROM; packet buffer size: 96 KB
Wall, desktop and under-table mounting
100 Mb Latency
< 3.7µs (LIFO 64-byte packets)
Throughput
up to 1.1 Mpps (64-byte packets)
Switching capacity
1.6 Gbps
MAC address table size
1024 entries
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage
-40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage
15% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics Frequency
50/60 Hz
Maximum heat
13 BTU/hr (13.72 kJ/hr)
dissipation
AC Voltage
100 - 240 VAC
Current
0.3 A
Maximum power rating 3.6 W
Notes
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and
all modules populated.
Safety
Emissions
Immunity
Services
The exact input voltage and frequency rating are determined by the
specific power adaptor part number ordered. Please select the correct
power adaptor country option.
UL 60950-1; CSA 22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 11
QuickSpecs
HP 1410 Switch series
Technical Specifications
HP 1410-16 Switch (J9662A)
Ports
16 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX)
Duplex: half or full
Supports a maximum of 16 autosensing 10/100 ports
Physical characteristics Dimensions
8.21(w) x 4.21(d) x 1.73(h) in (20.85 x 10.69 x 4.39 cm) (1U height)
Weight
1.43 lb (0.65 kg)
Memory and processor
16 Kb EEPROM; packet buffer size: 2 Mb
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack (hardware included); wall, desktop and under-table
mounting
Performance
100 Mb Latency
< 10.6 µs (LIFO 64-byte packets)
Throughput
up to 2.3 Mpps (64-byte packets)
Switching capacity
3.2 Gbps
MAC address table size
8192 entries
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage
-40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage
15% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics Frequency
50/60 Hz
Maximum heat
13 BTU/hr (13.72 kJ/hr)
dissipation
AC Voltage
100 - 240 VAC
Current
Maximum power rating
Notes
Safety
Emissions
Immunity
0.3 A
3.6 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and
all modules populated
The exact input voltage and frequency rating are determined by the
specific power adaptor part number ordered. Please select the correct
power adaptor country option.
UL 60950-1; CSA C22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 12
QuickSpecs
HP 1410 Switch series
Technical Specifications
Notes
Services
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
IEEE 802.3az Energy Efficient Ethernet protocol is supported by the HP 1410-24G-R (JG708A), HP
1410-16 (J9662A) and HP 1410-24 (J9663A) Switches.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.
HP 1410-24 Switch (J9663A)
I/O ports and slots
24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX)
Duplex: half or full
Supports a maximum of 24 autosensing 10/100 ports
Physical characteristics Dimensions
13.23(w) x 6.65(d) x 1.73(h) in (33.6 x 16.89 x 4.39 cm) (1U height)
Weight
2.98 lb (1.35 kg)
Memory and processor
16 Kb EEPROM; packet buffer size: 2 Mb
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack (hardware included); wall, desktop and under-table
mounting
Performance
100 Mb Latency
< 11 µs (LIFO 64-byte packets)
Throughput
up to 3.5 Mpps (64-byte packets)
Switching capacity
4.8 Gbps
MAC address table size
8192 entries
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage
-40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage
15% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics Frequency
50/60 Hz
Maximum heat
17 BTU/hr (17.93 kJ/hr)
dissipation
AC Voltage
100 - 240 VAC
Current
Maximum power rating
Notes
0.4 A
4.8 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and
all modules populated.
The exact input voltage and frequency rating are determined by the
specific power adaptor part number ordered. Please select the correct
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 13
QuickSpecs
HP 1410 Switch series
Technical Specifications
Safety
Emissions
Immunity
Notes
Services
power adaptor country option.
UL 60950-1; CSA 22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
IEEE 802.3az Energy Efficient Ethernet protocol is supported by the HP 1410-24G-R (JG708A), HP
1410-16 (J9662A) and HP 1410-24 (J9663A) Switches.
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.
HP 1410-24-R Switch (JD986B)
I/O ports and slots
24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX)
Duplex: half or full
Supports a maximum of 24 autosensing 10/100 ports
Dimensions
17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm)
Weight
4.41 lb (2.0 kg)
Memory and processor
8kb EEPROM; packet buffer size: 2 Mb
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack (hardware included); desktop mounting
Performance
100 Mb Latency
< 11 µs (LIFO 64-byte packets)
Throughput
up to 3.5 Mpps (64-byte packets)
Switching capacity
4.8 Gbps
MAC address table size
8192 entries
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage
-40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage
5% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 16,404 ft (5 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics Frequency
50/60 Hz
Maximum heat
21 BTU/hr (22 kJ/hr)
dissipation
Physical characteristics
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 14
QuickSpecs
HP 1410 Switch series
Technical Specifications
Safety
Emissions
Immunity
Services
AC Voltage
100 - 240 VAC
Current
Maximum power rating
Notes
1.1 A
3.6 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and
all modules populated.
This model provides an internal power supply. Please select the correct
power cord country option.
UL 60950-1; CSA 22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.
HP 1410-24-2G Switch (J9664A)
I/O ports and slots
24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX)
Duplex: half or full
2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T) Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
Supports a maximum of 24 autosensing 10/100 ports plus 2 autosensing 10/100/1000 ports
Physical characteristics Dimensions
13.23(w) x 6.65(d) x 1.73(h) in (33.6 x 16.89 x 4.39 cm) (1U height)
Weight
2.98 lb (1.35 kg)
Memory and processor
2 Kb EEPROM; packet buffer size: 2.5 Mb
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack (hardware included); wall, desktop and under-table
mounting
Performance
100 Mb Latency
< 5.6 µs (LIFO 64-byte packets)
1000 Mb Latency
< 2.2 µs (LIFO 64-byte packets)
Throughput
up to 6.5 Mpps (64-byte packets)
Switching capacity
8.8 Gbps
MAC address table size
8192 entries
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 15
QuickSpecs
HP 1410 Switch series
Technical Specifications
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
Electrical characteristics Frequency
Maximum heat
dissipation
AC Voltage
Current
Maximum power rating
Notes
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft. (3 km)
Power: 0 dB No fan
50/60 Hz
37 BTU/hr (39.03 kJ/hr)
100 - 240 VAC
0.9 A
10.8 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and
all modules populated.
The exact input voltage and frequency rating are determined by the
specific power adaptor part number ordered. Please select the correct
power adaptor country option.
Safety
UL 60950-1; CSA 22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
Emissions
FCC Rules Part 15, Subpart B Class A
Immunity
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Services
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.
Standards and protocols General protocols
(applies to all products in IEEE 802.1p Priority
series)
IEEE 802.3ab 1000BASE-T Gigabit Ethernet over twisted pair (10/100/1000 models only)
IEEE 802.3i 10BASE-T Ethernet over twisted pair
IEEE 802.3u 100BASE-TX Fast Ethernet, 100BASE-FX with autonegotiation
IEEE 802.3x Flow Control
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 16
QuickSpecs
HP 1410 Switch series
Accessories
HP 1410 Switch series
accessories
Cables
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
HP 1410-24G Switch (J9561A)
HP X111 100M SFP LC FX Transceiver
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
J9054C
Page 17
QuickSpecs
HP 1410 Switch series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP 0.5 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ833A)
Notes
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.











HP 1 m Multimode OM3
LC/LC Optical Cable
(AJ834A)
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Notes
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.

Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 18
QuickSpecs
HP 1410 Switch series
Accessory Product Details










HP 2 m Multimode OM3
LC/LC Optical Cable
(AJ835A)
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Notes
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.










Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 19
QuickSpecs
HP 1410 Switch series
Accessory Product Details

HP 5 m Multimode OM3
LC/LC Optical Cable
(AJ836A)
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cabling
Cable type:
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Notes
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a tight
buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable
and Ethernet assembly with LC duplex connectors on one end and LC
duplex connectors on other end.











Services
HP 15 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ837A)
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 20
QuickSpecs
HP 1410 Switch series
Accessory Product Details
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.











Services
HP 30 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ838A)
Notes
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.






Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 21
QuickSpecs
HP 1410 Switch series
Accessory Product Details





Services
HP 50 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ839A)
Notes
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.











HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 22
QuickSpecs
HP 1410 Switch series
Accessory Product Details
1m Cable (QK732A)
on each end.
Services
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
2m Cable (QK733A)
Notes
Services
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
5m Cable (QK734A)
Notes
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 23
QuickSpecs
HP 1410 Switch series
Accessory Product Details
Services
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
15m Cable (QK735A)
Notes
Services
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
30m Cable (QK736A)
Notes
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 24
QuickSpecs
HP 1410 Switch series
Accessory Product Details
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
50m Cable (QK737A)
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
HP X121 1G SFP LC SX
Transceiver (J4858C)
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Ports
Physical characteristics
1 LC 1000BASE-SX port; Duplex: full only
Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
A small form-factor
pluggable (SFP) Gigabit SX Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
transceiver that provides a
Operating relative humidity: 5% to 85%, noncondensing
full-duplex Gigabit
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
solution
Altitude: up to 10,000 ft. (3 km)
up to 550 m on multimode
Electrical characteristics Power consumption typical: 0.4 W
fiber.
Power consumption maximum: 0.7 W
Cabling
Type:

62.5/125 µm or 50/125 µm (core/cladding) diameter, gradedindex, low metal content, multimode fiber optic, complying with
ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:




2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 25
QuickSpecs
HP 1410 Switch series
Accessory Product Details
HP X121 1G SFP LC LX
Transceiver (J4859C)
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Ports
Physical characteristics
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full only
Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight:0.04 lb. (0.02 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
Altitude: up to 10,000 ft. (3 km)
Type:
HP X121 1G SFP LC LX
Environment
Transceiver: An SFP
format
gigabit transceiver with LC
connectors using LX
Cabling
technology.

Either single mode or multimode; 62.5/125 µm or 50/125 µm
(core/cladding) diameter, graded-index, low metal content,
multimode fiber optic, complying with ITU-T G.651 and ISO/IEC
793-2 Type A1b or A1a, respectively; Low metal content, singlemode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2
Type B1;
Maximum distance:




Notes
Services
HP X111 100M SFP LC FX Ports
Transceiver (J9054C)
Physical characteristics
Environment
2-550 m (multimode 62.5 µm core diameter, 500 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 500 MHz*km
bandwidth)
2-10,000 m (single-mode fiber)
A mode conditioning patch cord may be needed in some multimode fiber
installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX); Duplex: half or full
Dimensions
2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22
cm)
Weight
0.06 lb. (0.03 kg)
Operating temperature 32°F to 158°F (0°C to 70°C)
Operating relative
5% to 95%
humidity
Nonoperating/Storage
-40°F to 185°F (-40°C to 85°C)
temperature
Nonoperating/Storage
5% to 85%
relative humidity
Altitude
up to 10,000 ft. (3 km)
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 26
QuickSpecs
HP 1410 Switch series
Accessory Product Details
Cabling
Notes
Services
Cable type:
62.5/125 ìm or 50/125 ìm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
• 2 km (full duplex) or 412 m (half duplex)
Transmitter wavelength: 1310nm
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the J9054C 100-FX SFPLC Transceiver" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 27
QuickSpecs
HP 1410 Switch series
Summary of Changes
Date
01-Dec-2014
Action
Changed
Description of Change:
Updated Warranty and support
Changed
Updated Introduction.
Changed
30-Sep-2013
11-Sep-2013
10-Jun-2013
28-Oct-2011
Version History
From Version 12 to
13
From Version 11 to
12
From Version 10 to
11
From Version 9 to 10
From Version 8 to 9
From Version 7 to 8
From Version 6 to 7
30-Sep-2011
16-Aug-2011
24-May-2011
From Version 5 to 6
From Version 4 to 5
From Version 3 to 4
Added
Changed
Changed
09-May-2011
From Version 2 to 3
Changed
15-Mar-2011
From Version 1 to 2
Changed
Updates were made throughout the document for the
12/9 refresh.
Configuration was revised.
Configuration was added.
OM4 cables were added.
Changes were made throughout, including changing the
title.
Accessory Product Details was added.
Features and benefits and models were revised.
The Accessories section was revised. Two new models
were added to the document as well.
The Accessories section was revised. Two new models
were added to the document as well.
Changes were made throughout, including changing the
title.
16-Dec-2013
09-Dec-2013
Changed
Added
Added
Changed
To learn more, visit: www.hp.com/networking
© Copyright 2010-2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change
without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying
such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
c04164469 — DA – 13674 Worldwide — Version 13 — December 1, 2014
Page 28
Download PDF
Similar pages