MAKE THE MOST OF YOUR
L30WD-1 (pictured)
L42CC-1
Warming Drawer/Warming Drawer Cabinet
CARE & USE/INSTALLATION
LCS30 COCKTAIL STATION CARE & USE/INSTALLATION
|
1
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Read this manual carefully and completely before using your warming drawer to reduce the risk of:
•
Fire
•
Burn hazard, personal injury or property damage
•
Unapproved installation or service
This product is designed for indoor or outdoor installation. Improper installation, adjustment, alteration, service or maintenance can
cause personal or property damage and may void the warranty. Read this manual thoroughly before installation, use or service.
CAUTION: UNPLUG the warming drawer before beginning any work. Make sure you READ and UNDERSTAND these instructions
BEFORE installation. If you have any questions or concerns prior to, or during service, please call Customer Care/Tech. Support at
888-289-5969, Mon.– Fri. 6AM to 4:30PM, and Saturdays from 8AM to 1PM Pacific Time.
IMPORTANT: When using electrical appliances, basic safety precautions should always be followed including the following:
1. Read all instructions before using the warming drawer
2. Do not store or use gasoline or other flammable vapors and liquids in the drawer or in the vicinity of this or any other appliance.
3. Do not touch hot surfaces, the heating elements or drawer interior surfaces while the drawer is in use. Only touch handles or
knobs. Use only dry potholders. Using moist or damp pot holders may cause steam burns to your hands.
4. To protect against electrical shock, do not immerse cord, plugs, or base in water or other liquids.
5. Do not use foil to line the interior of the drawers. This traps heat and increases the risk of damage.
6. Close supervision is necessary when the appliance is used by or near children.
7. Do not allow the cord to touch hot surfaces.
8. Do not install on or near a hot gas or an electric burner.
9. Make sure the appliance is turned off before plugging in or removing the plug from the power receptacle.
10. Do not use this appliance for anything other than the intended use.
11. Keep the warming drawer away from water sprinklers.
12. Do not store materials, not recommended by the manufacturer, in the drawer when not in use.
13. Always place steam racks in desired position while the appliance is cool.
14. Do not obstruct the warming drawer vent ducts while cooking. You may want to close them when the unit is not in use to help
keep rain/water from getting into the drawer.
15. Do not cover food with plastic wraps or use plastic food containers in the drawer while heating. Plastics will melt and damage
the drawer interior.
16. Do not place food in sealed containers in the drawer. Pressure could build up and cause the container to burst resulting in
damage or personal injury.
17. Use care while opening a heated drawer to allow hot air and steam to escape before removing or replacing food.
18. This appliance is designed to be installed by a qualified technician and plugged into a dedicated, properly grounded, GFIC
outlet.
19. ETL listed for indoor and outdoor use.
20. Unplug the unit when not in use and before cleaning. Allow to cool before putting on or taking off parts.
21. Do not operate any appliance with damaged cord or plug, or after the appliance malfunctions or has been damaged in any
manner. Contact Lynx Customer Care Department for service facility information or additional details.
22. Do not repair or replace any part of this warming drawer. All servicing should be done by an authorized service agency.
Contact Lynx Customer Care Department for service information. 1-888-289-5969
23. Save these instructions for future reference.
L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
|
3
ELECTRICAL INFORMATION
WARNING: ELECTRICAL GROUNDING
1. Warming drawer must be installed in accordance with the local electric code or, in the absence of local codes, the latest edition
of the National Electrical Code ANSI/NFPA No. 70, or the Canadian Electrical Code CGA 1.6b 2005.
2. Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor appliance. This type of outlet should be installed by
a qualified electrician.
3. This warming drawer is equipped with a three prong (grounded) electric plug for your protection against shock hazard and must
be plugged directly into a properly grounded three prong outlet. Never cut or remove the grounding prong from this plug.
4. Use only extension cords with a 3 prong grounding plug rated for the power of the equipment and approved for outdoor use
with a “WA” marking and a tag stating “suitable for use with outdoor appliances”.
5. To protect against electric shock, do not allow any part of the power cord, extension cord, or any plugs come in contact with
water, other liquids or the ground.
6. Unplug or shut down the circuit to the warming drawer from the outlet before cleaning or when not in use for extended
periods.
7. Do not clean this product with a water spray or the like.
8. Allow the drawer to cool before putting on or taking off parts.
9. Do not use the warming drawer for purposes other than intended.
10. Do not operate the warming drawer with a damaged cord, plug or after the appliance malfunctions, or has been damaged in any
manner. Contact Lynx Customer Care for repairs. 1-888-289-5969
CONNECTION TO AC:
Installation requires an outdoor 120 VAC, 15 amp dedicated GFI protected outlet.
The warming drawer is rated as follows; 120 VAC, 60 Hz, 480 W, 4 AMP
IF SHIPMENT ARRIVED DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain this is noted on freight bill or express receipt and signed by person making
the delivery.
2. FILE CLAIM FOR DAMAGES IMMEDIATELY, regardless of extent of damage.
3. CONCEALED LOSS OR DAMAGE: If damage is unnoticed until merchandise is unpacked, notify transportation
company or carrier immediately and file a “concealed damage” claim with them. This should be done within (15)
days of date delivery is made to you. Be sure to retain container for inspection. We cannot assume responsibility
for damage or loss incurred in transit.
4
| L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
INSTALLING THE WARMING DRAWER L30WD
Support Beams
WARMING DR AWERS (cutout)
MODEL
L30WD-1
W (Width)
H (Height)
D (Depth)
28.50
10.00
20.50
W
D
20
H
Apply weather proof
sealant along the edges
of the warming drawer.
1/4
”
11 1/2”
30”
120 V Electric
Outlet Needed
TYPICAL ISLAND INSTALLATION (L30WD)
1.
2.
3.
4.
5.
6.
7.
8.
9.
Provide a 10” x 28 ½” cutout to the front of the island.
Provide support beams using metal studs.
Pull the drawer out of the drawer casing to gain access on the mounting holder at the front of the casing.
Insert the drawer casing into the island opening.
Secure the drawer casing with screws at the inside front top and bottom, using the pre-punched mounting
holes.
Re-assemble the drawer section into the drawer casing.
Apply weather proof sealant along the edges of the warmer.
Plug-in the warmer to a weather proof, and properly grounded, electrical outlet.
If installing the unit directly under a grill, please allow 2-3/16” between the grill cutout bottom and the top of
the warming drawer cutout.
IMPORTANT
• Be sure that the warming drawer is properly grounded and installed by a qualified technician. The electrical
cord has a 3 prong plug. Do not cut any of the prongs.
• Make sure that the island is free of cracks that would allow water or other liquids to get into the electrical
controls.
• Keep the warming drawer away from water sprinklers.
• When not in use, cover the island to protect from rain and harsh weather.
• If installing the unit directly under a grill, please allow 2-3/16” between the grill cutout bottom and the top of
the warming drawer cutout.
L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
|
5
INSTALLING THE WARMING DRAWER L42CC
WARMING DR AWERS (cutout)
MODEL
L42CC-14
24
W (Width)
0.25
H (Height)
D (Depth)
19.382
4.50
3/4
”
21”
D
H
W
41
”
3/4
120 V Electric
Outlet Needed
TYPICAL ISLAND INSTALLATION (L42CC)
1. Provide a 19 3/8” x 40 ¼” cutout to the front of the island.
2. Provide support beams using metal studs.
3. Pull the drawer out of the drawer casing to gain access on the mounting holder at the front of the casing.
4. Insert the drawer casing into the island opening.
5. Secure the drawer casing with screws at the inside front top and bottom, using the pre-punched mounting holes.
6. Re-assemble the drawer section into the drawer casing.
7. Apply weather proof sealant along the edges of the warmer.
8. Plug-in the warmer to a weather proof, and properly grounded, electrical outlet.
9. If installing the unit directly under a grill, please allow 2-3/16” between the grill cutout bottom and the top of
the warming drawer cutout.
IMPORTANT
• Be sure that the warming drawer is properly grounded and installed by a qualified technician. The electrical
cord has a 3 prong plug. Do not cut any of the prongs.
• Make sure that the island is free of cracks that would allow water or other liquids to get into the electrical
controls.
• Keep the warming drawer away from water sprinklers.
• When not in use, cover the island to protect from rain and harsh weather.
• If installing the unit directly under a grill, please allow 2-3/16” between the grill cutout bottom and the top of
the warming drawer cutout.
6
| L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
TEMPERATURE CONTROLS
The temperature control dial is used to select the temperature of the warming drawer.
The warming drawer should only be opened when adding or removing food. Continuous opening of the drawer
allows warm air to escape and make the food colder.
Do not use aluminum foil to line the drawer. It is an excellent heat insulator and will trap heat beneath it. This
may affect the performance of the warming drawer and the interior finish.
HEAT LIGHT ON
The heat-on blue indicator light turns on when the control knob is set and cycles “on” and “off” with the heating
element as temperature is maintained.
MOISTURE VENT CONTROL
The moisture vent control is located at the top inside of the warming drawer. It can be adjusted in any position
between “open” and “close” to maintain desired degree of moisture.
1. For crispy foods, slide the moisture vent control inward to open the vents and allow the moisture to escape.
2. For moist food, slide the moisture vent control outward to close the vents and seal the moisture inside the
drawer.
HEATING INSTRUCTIONS
1. Dry Heat
The main function of the warming drawer is to maintain food at a desired serving temperature.
Place previously prepared foods directly into the empty steam pans (no water) and set the moisture vent
control.
Set the temperature control dial. The heat-on blue indicator light will illuminate until the desired temperature is
reached.
2. Moist Heat
The warming drawer also seals moisture within the drawer to keep the food moist.
Put just enough of water, approximately ½” high, in t the steam pans.
Place the steam rack inside the steam pan.
Place the food directly on the rack or use a suitable container that will fit in the steam pans. Do not use plastic
containers or utensils.
Set the temperature control dial. The heat-on blue indicator light will illuminate until the desired temperature is
reached.
Periodically, check the water level in the steam pans and add water when necessary.
L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
|
7
CLEANING AND MAINTENANCE
The Warming Drawer is made of welded #304 stainless steel. It is non-rusting and non-magnetic.
1.
2.
3.
4.
5.
Allow the warming drawer and its accessories to cool before cleaning.
Remove steam pans and all accessories from the warming drawer.
Unplug the warming drawer prior to cleaning.
Clean all items including the drawer with a mild cleanser. Scrub dirt with a sponge.
When cleaning the front panel, always scrub in the direction of the grain. In order to maintain the luster and
highlights of the polished surface, do not use abrasives when cleaning the polished surfaces.
6. Do not use steel wool to clean the drawer and accessories.
7. Check out the slide rails and make sure they are clean and free from debris.
8. It is recommended to clean the warming drawer after every use.
TROUBLE SHOOTING GUIDE AND SERVICE
Problem
1. Warming drawer will not heat up.
2. Heat-on indicator light does not illuminate.
If Service is Required
8
What To Do
Check the following:
1. Is the unit plugged into an electrical outlet?
2. Has the GFCI protection been tripped?
3. Is the temperature control dial properly set?
4. Has the circuit breaker been tripped?
Check the following:
1. Is the unit plugged into an electrical outlet?
2. Has the GFCI protection been tripped?
3. Is the temperature control dial properly set?
4. Has the circuit breaker been tripped?
Call Lynx customer care department (888-289-5969)
Provide the following information:
• Model Number
• Serial Number
• Date of Purchase
• Name of the Dealer
| L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
CONTACTING LYNX CUSTOMER CARE
Before calling Lynx Customer Care, please make sure you
have the following information:
For warranty service, contact the Lynx Customer Care
Department for an authorized service agent near you at:
•Model number
(888) 289-5969
www.lynxgrills.com
•Date of purchase
Your satisfaction is of the utmost importance to us. If a
problem cannot be resolved to your satisfaction, please
write, fax or email us:
•Proof of purchase by the original owner
•Serial number
The serial number can be located on the rating plate which
is located on the unit or is also located on the care and use
manual.
Lynx Professional Grills
7300 Flores Street
Downey, CA 90242
Service: (888) 289-5969
Tel: (562) 299-6900
Fax: (562) 299-6978
www.lynxgrills.com
Contact Lynx for replacement parts. Parts are shipped
F.O.B. Downey, CA.
THE LYNX STORY
Lynx began with a vision.
A small group of manufacturing engineers with over a
century of collective experience had a dream. They dared
to take their extensive commercial manufacturing know-how
and create a line of outdoor cooking products that offer
commercial elegance and performance to the consumer
market.
Lynx has taken the
quality, workmanship,
service and
innovation of the
commercial market and
incorporated it into the
Lynx Professional Grills
line of consumer and
commercial products.
The combination of
creative design, superior
materials and exceptional
craftsmanship elevates
Lynx products to a class
of their own.
Lynx original commercial products are used every day in
restaurants, hotels and theme parks across the USA:
LYNX SATISFIED CUSTOMERS
• TGI Fridays
• Applebee’s
• Houston’s
• Red Lobster
• Hard Rock Café
• Wolfgang Puck’s
• Cheesecake Factory
• Red Robin
• Planet Hollywood
• Hilton
• Hyatt
• Four Seasons Marriott
Le Meridian
• Sheraton
• Conrad International
• Bellagio
• New York New York
• MGM Grand
• Treasure Island
• Mirage
• Paris
• Venetian
• Excalibur
• Mandalay Bay
• Riviera
• Desert Inn
• Hard Rock Hotel
• Disney World
L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
|
9
WARMING DRAWER CARE
STAINLESS STEEL
Lynx products are known for their attractive appearance.
We achieve this by selecting only the finest grades of
stainless steel and applying exacting workmanship.
In order to maintain this attractive appearance over the life
of the grill it is important to take the following steps:
•Use a commercially available Stainless Steel cleaner* to
clean and polish the exterior surfaces.
Doing these things on a regular basis minimizes the amount
of effort required.
Part of the appeal of your Lynx Accesory is the fine grain
finish. When removing stubborn stains:
•Do not use metallic abrasives and always rub in the
direction of the grain.
•Some household cleaning products are not suitable for
stainless steel; be sure to read the label before using on
your Lynx Accesory.
•Always use the mildest cleaning solution first, scrubbing
SPECIAL NOTE FOR LOCATIONS NEAR POOLS AND
COASTAL AREAS:
The 304 stainless steel material used in the construction of
a Lynx Grill is highly rust resistant, however, chlorine in the
air from swimming pools or the salt from sea air may cause
surface rust to appear and even create some pitting if left
on the product.
Here are a few tips to avoid this:
•Regularly wipe down the exterior surfaces with a damp
cloth. (Micro fiber cloths such as Ecloth perform very
well).
•Allow the surfaces to dry before installing the cover. Do
not cover a damp sink.
•In extreme environments apply a rust inhibitor which
leaves a microscopic protective layer on the stainless.
Products that provide a layer of vapor corrosion inhibitors
(VpCI™) protect the surface very well.
•For seasonal storage use the product referred to above,
ensure the sink is dry and then cover and secure the
cover to minimize the amount of damp air getting to the
surfaces.
THE LYNX LIMITED LIFE TIME WARRANTY PROVIDES
PROTECTION AGAINST RUST THROUGH OF PARTS THAT
RENDER THE PRODUCT INOPERATIVE. IT DOES NOT
COVER OCCASIONAL SURFACE RUST OR STAINING DUE
TO ENVIRONMENTAL CONDITIONS.
in the direction of the grain. Specks of grease may gather
in the grain of the stainless steel and bake on to the
surface, giving the appearance of rust.
For light and heavy food stains there are many different
stainless steel cleaners available.
To remove these baked-on foods use a fine to medium
grit non-metallic abrasive pad (Scotch Brite is good) in
conjunction with a stainless steel cleaner.
•Solutions used for cleaning concrete and masonry
can be very corrosive and will ‘attack’ stainless steel.
Ensure your Lynx products are well protected before
you allow the use of such chemicals.
10
| L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
THE L30WD COMPONENTS
Diagram and Parts
13
12
11
10
9
8
7
Moisture Vent Control
1
Item
Description
2
3
5
4
Part Number
Item
6
Description
Part Number
1
Heating Element
32624
8
Handle Bracket
31736
2
Thermostat
33483
9
Drawer Assembly
80826
3
Bezel
10001
10
Steam Pan Guide
32603
4
Control Knob
31419
11
Steam Pan
32640
5
Heat on Light
32630
12
Steam Rack
31967
6
Roller Guides
32217
13
Steam Pan Lid
32633
7
Drawer Handle
32634
Power Cord (not Pictured)
70078
L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
|
11
THE L42CC COMPONENTS
Diagram and Parts
13
12
11
10
4
9
5
8
7
1
2
3
6
15
16
14
Item
12
Description
Part Number
Item
Description
Part Number
1
Heating Element
32624
10
Steam Pan Guide
32603
2
Thermostat
33483
11
Steam Pan
32640
3
Heat on Light
32630
12
Steam Rack
31967
4
Control Knob
31419
13
Steam Pan Lid
32633
5
Bezel
10001
14
Storage Drawer
80879
6
Roller Guides
32217
15
Tank Drawer
80164
7
Drawer Handle
32634
16
Door Panel
80873
8
Handle Bracket
31736
Power Cord (not pictured)
70078
9
Drawer Assembly
80826
| L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
SCHEMATICS
L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
|
13
L30WD PRODUCT DIMENSIONS
14
| L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
L30WD CUT OUT DIMENSIONS (IN BLUE)
L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
|
15
L42CC PRODUCT DIMENSIONS
16
| L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
L42CC CUT OUT DIMENSIONS (IN BLUE)
L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
|
17
LYNX LIMITED WARRANTY
I. Limited Lifetime Warranty
The stainless steel housing is warranted to be free from defects
in material and workmanship when subjected to normal
domestic use and maintenance for the lifetime of the original
purchaser. This warranty excludes surface corrosion, scratches,
and discoloration which may occur during normal use. This
warranty is limited to the replacement of the defective parts,
with the owner paying a processing fee and all other costs
including labor. Failure to perform required maintenance will
void this warranty
II. Limited Five-Year Warranty
The following grill parts are warranted to be free from defects in
material and workmanship, when subjected to normal domestic
use and maintenance, for a period of five (5) years from the
original date of purchase; interiror parts, including steam pans
and lids. This warranty is limited to the replacement of the
defective parts, with the owner paying a processing fee and all
other costs including labor.
III. Limited two-Year Warranty
All other components are warranted to be free from defects
in material and workmanship, when subjected to normal
domestic use and maintenance, for a period of two (2) years
from the original date of purchase. This warranty is limited to the
replacement of the defective parts, with the consumer paying all
labor costs.
IV. Limited One-Year Warranty
For a period of one (1) year from the original date of purchase,
Lynx will replace or repair parts found to be defective at no
cost to the original purchaser. This includes the cost of shipping
replacement parts and, where necessary, service labor at
prevailing local rates by a Lynx authorized service person. Service
will be provided during normal business hours and must be
authorized in advance by Lynx.
V. Limitations & Exclusions
1) This Warranty shall apply to products purchased and located
in the United States and Canada. Products must be purchased in
the country where service is requested.
2) Warranty applies only to the original purchaser and may not
be transferred.
3) Warranty is in lieu of all other warranties expressed or implied
and all other obligations or liabilities related to the sale or use of
Lynx products.
4) Warranty shall not apply and Lynx is not responsible for
damage resulting from misuse, abuse, failure to provide
reasonable and necessary required maintenance, natural
disaster, animals, alteration of or tampering with the appliance,
accident, hostile environment, flare-up fires, improper
installation or operation, or an installation not in accordance
with the instructions contained in this manual, or the local
codes.
18
5) Lynx shall not be liable for incidental, consequential, special
or contingent damages resulting from its breach of this written
warranty or any implied warranty.
6) Some states do not allow limitations on how long an
implied warranty lasts, or the exclusions of or limitations on
consequential damages. This warranty gives you specific legal
rights and you may have other rights which vary from state to
state.
7) No one has the authority to add to or vary Lynx’s warranty, or
to create for Lynx any other obligation or liability in connection
with the sale or use of its products.
8) Limited to the replacement of defective parts with the owner
paying all other costs including labor.
VI. What is not covered: Lynx shall not be responsible for and
shall not pay for the following
1) Installation or start-up, damages or problems caused by
improper installation or use;
2) Service by an unauthorized service provider;
3) Damage or repair due to service by an unauthorized service
provider or use of unauthorized parts;
4) Warranty does not apply to products installed in any
commercial or non-residential application. Examples of excluded
applications include, but are not limited to day care centers,
schools, bed and breakfast centers, churches, private clubs, fire
stations, club houses, common areas in multi-family dwellings,
restaurants, hotels, nursing homes, food service locations and
institutional food service locations. *Contact Lynx for Common
Area Warranty.
5) To correct normal adjustments or settings, due to improper
installation, commissioning or local gas supply properties.
6) Shipping and handling costs, export duties, installation,
removal, or re-installation cost (RMA excluded).
7) Display models are sold “as is”. If you have purchased a
display model, please be advised that it is sold “as is” and that
it is subject to the following warranty exclusions: any exterior or
cosmetic damage is nonwarrantable; any missing components
will be replaced at consumers expense; major handling damage
to manifold, valve and ignition system will be serviced at
consumer’s expense; all other warranties will remain in effect.
8) The cost of a service call to diagnose complaint.
9) Modification to Lynx product will void related warranties.
| L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
LYNX COMMON AREA LIMITED WARRANTY
The Lynx Limited Warranty covers residential installations only
and is non-transferable to any other party. This ‘non-residential’
warranty applies when the product is installed in common areas
where more than a single party has rightful access to its use or
in locations considered beyond normal residential use such as
B&B’s, and private clubs.
THIS PROVISION EXCLUDES ALL COMMERCIAL APPLICATIONS,
INCLUDING, BUT NOT LIMITED TO RESTAURANTS AND
INSTITUTIONAL FOOD SERVICE LOCATIONS.
I. Limited Five-Year Warranty
The stainless steel housing is warranted to be free from defects
in material and workmanship when subjected to normal use
and maintenance for a five year period from the original
purchase date. This warranty excludes surface corrosion,
scratches, and discoloration which may occur during regular
use. This warranty is limited to the replacement of the defective
parts, with the consumer paying labor.
II. Limited One-Year Warranty
The structural integrity of the interior parts, exterior, and steam
pans are warranted to be free from defects in material and
workmanship, when subjected to normal domestic use and
service, for a period of one year from the date of purchase. This
warranty is limited to the replacement of the defective parts,
with the owner paying all other costs including labor.
III. Limited Parts & Labor Warranty
All other components are warranted to be free from
defects in material and workmanship for a period of 90 days
from the original date of purchase. Lynx will replace or repair
parts found to be defective at no cost to the original purchaser.
After the 90 day period Lynx will sell parts to the holder of this
warranty at Lynx contractor prices for an additional 9 months.
IV. Limitations & Exclusions
6) Some states do not allow limitations on how long an
implied warranty lasts, or the exclusions of or limitations
on consequential damages. This warranty gives you
specific legal rights and you may have other rights which
vary from state to state.
7) No one has the authority to add to or vary Lynx’s warranty, or
to create for Lynx any other obligation or liability in
connection with the sale or use of its products.
8) Limited to the replacement of defective parts with the
owner paying all other costs including labor.
V. What is not covered: Lynx shall not be responsible for and
shall not pay for the following:
1) Installation or start-up, damages or problems caused by
improper installation or use;
2) Service by an unauthorized service provider;
3) Damage or repair due to service by an unauthorized
service provider or use of unauthorized parts;
4) To correct normal adjustments or settings, due to
improper installation, commissioning or local gas supply
properties;
5) Shipping and handling costs, export duties, installation,
removal, or re-installation cost (RMA exluded).
6) Display models are generally sold “as is.” If you have
purchased a display model, please be advised that it is
sold “as is” and that it is subject to the following warranty
exclusions: any exterior or cosmetic damage is nonwarrantable; any missing components will be replaced at
consumer’s expense; major handling damage to
manifold, valve and ignition system will be serviced at
consumer’s expense; all other warranties will remain in effect.
7) The cost of a service call to diagnose complaint.
8) Modification to Lynx product will void related warranties.
1) This Warranty shall apply to products purchased and
located in the United States and Canada. Products must
be purchased in the country where service is requested.
2) Warranty applies only to the original location of installation
and may not be transferred.
3) Warranty is in lieu of all other warranties expressed or
implied and all other obligations or liabilities related to the sale
or use of Lynx products.
4) Warranty shall not apply and Lynx is not responsible
for damage resulting from misuse, abuse, failure to
provide reasonable and necessary required maintenance,
natural disaster, animals, alteration of or tampering with the
appliance, accident, hostile environment, flare-up fires,
improper installation or operation, or an installation not in
accordance with the instructions contained in this manual, or
the local codes.
5) Lynx shall not be liable for incidental, consequential,
special or contingent damages resulting from its breach
of this written warranty or any implied warranty.
L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
|
19
The best outdoor kitchen products come from:
Lynx Grills, Inc. 7300 Flores Street Downey, CA 90242
Service: (888)-289-5969 Fax: (562) 299-6789
www.lynxgrills.com
P/N 31949 Rev.E 9/2017
Download PDF
Similar pages