HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:
Class HC Fitness Product
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4, Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
Model No. PETL50130
Serial No.
USER’S MANUAL
Write the serial number in the space
above for future reference.
Tel:
Serial Number Decal
08457 089 009
Outside the UK: (44) 113 387 7133
Fax: (44) 113 387 7125
To help us assist you, please be prepared to give the following information:
• The MODEL NUMBER of the product (PETL50130)
QUESTIONS?
• The NAME of the product (PROFORM® 560 HR treadmill)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the PART LIST on pages 30 and 31 and the
EXPLODED DRAWING attached in the centre of this manual)
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:
08457 089 009
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road, Beeston
Leeds, LS11 8JG
UK
email: csuk@iconeurope.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual for future reference.
Part No. 200853 R0304A
Printed in USA © 2004 ICON Health & Fitness, Inc.
Visit our website at
www.iconeurope.com
Key No. Qty.
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
TREADMILL OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Note: An EXPLODED DRAWING is attached in the centre of this manual.
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
2
2
4
4
2
2
2
2
1
1
2
1
1
1
1
1
1
2
1
1
4
1
2
1
1
2
2
2
1
Description
Clevis Pin
Hairpin Cotter
Cage Nut
1 1/4” Bolt
Rear Base Pad
Wheel Housing
Wheel Bolt
Wheel
Base
Incline Stop Bracket
Incline Motor Bolt
Incline Motor
Right Handrail Bracket
Right Decal Holder
5/16” Allen Wrench
iFIT.com Cable
Motor Bracket
J-Nut
Front Roller Adj. Bolt
Front Roller/Pulley
Long Belly Pan Screw
Controller Wire
Rear Roller Star Washer
Pulse Wire
Pulse Bar
Caution Decal
Nylon Washer
Motor Pivot Bushing
Electronics Bracket
Key No. Qty.
130
131
132
133
134
135
136
137
138
139
140
141
#
#
#
#
#
#
#
#
#
#
#
Choke
Filter
Power Board
Plastic Stand-off
Ferrite Box
Splitter
Optic Disk
Photo Switch
Photo Switch Nut
Photo Switch Bolt
Photo Switch Washer
Circuit Breaker
12” Green Wire, F/Ring
6” Green Wire, 2 Ring
4” Green Wire, F/Ring
12” Blue Wire, 2 F
4” Blue Wire, 2 F
4” Blue Wire, M/F
4” Black Wire, M/F
4” Black Wire, 2 F
12” White Wire, 2 F
6” Red Wire, M/F
User’s Manual
* Includes all parts shown in the box
# These parts are not illustrated
Specifications are subject to change without notice.
PROFORM is a registered trademark of ICON Health & Fitness, Inc.
2
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Description
31
PART LIST—Model No. PETL50130
R0304A
To locate the parts listed below, see the EXPLODED DRAWING attached in the centre of this manual.
Key No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31*
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
2
1
1
2
4
45
1
2
4
1
2
1
2
2
2
2
2
1
2
1
7
2
1
1
1
1
1
1
1
1
1
1
1
1
2
7
2
1
1
1
2
1
1
1
2
1
5
1
1
1
Description
Key No. Qty.
Foot Rail Cover
Left Foot Rail
Left Front Endcap
Belt Guide
Belt Guide Screw
3/4” Screw
Left Decal Holder
Cushion Spring
Catch Screw/Isolator Screw
Warning Deal
Rear Platform Bolt
Latch Catch
Spring Bolt (Bottom)
Spring Bolt (Top)
Front Isolator
Front Platform Screw
Platform Pivot Bolt
Magnet
Lift Frame Spacer
Motor Pivot Bolt
Wheel Nut
Frame Spacer
Reed Switch Clip
Reed Switch
Reed Switch Screw
Lift Frame
Motor Tension Nut
Motor
Pulley/Flywheel/Fan
Motor Belt
Motor Assembly
Motor Tension Bolt
Motor Tension Washer
Motor Star Washer
Motor Bracket Bolt
Small Screw
Ground Wire
Transformer
Hood
Controller
Power Cord
iFIT.com Wire Nut
iFIT.com Wire
Receptical
Static Decal
On/Off Switch
Belly Pan Screw
Belly Pan
Photo Switch Wire
Filter Wire
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74*
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
30
1
1
1
1
2
1
1
1
1
2
2
1
1
1
2
2
4
1
1
1
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1
1
1
1
2
2
1
1
1
1
1
2
2
Description
Left Front Endcap
Walking Belt
Walking Platform
Frame
Platform Nut
Right Foot Rail
Rear Roller
Right Rear Foot
Allen Wrench
Rear Roller Adj. Bolt
Rear Roller Washer
Right Rear Endcap
Left Rear Foot
Left Rear Endcap
Small Endcap Screw
Endcap Washer
Front Endcap Screw
Left Handrail
Left Upright
Latch Knob
1” Bolt
Internal Washer
Left Handrail Bracket
Latch Assembly
Latch Knob Sleeve
Latch Pin Collar
Latch Spring
Right Console Plate
Pin Clip
Latch Pin
Right Handrail
Right Upright
Wire Harness
Left Accessory Tray
Console Base
Fan Screws
Fan
Console
Fan Housing
Right Accessory Tray
Key/Clip
1 1/4” Screw
2” Sliver Screw
Access Door
Console Back
Tie Holder
Releasable Tie
Plastic Tie
Base Endcap
Front Base Pad
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the treadmill.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
10. If an extension cord is needed, use only a 3conductor, 1mm2 (14-gauge) cord that is no
longer than 1.5 m (5 ft.).
2. Use the treadmill only as described in this
manual.
11. Keep the power cord away from heated
surfaces.
3. Place the treadmill on a level surface, with at
least 2.5 m (8 ft.) of clearance behind it and
0.5 m (2 ft.) on each side. Do not place the
treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
12. Never move the walking belt whilst the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 5 if the treadmill is not working properly.)
4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
13. Never start the treadmill whilst you are standing on the walking belt. Always hold the
handrails whilst using the treadmill.
5. Do not operate the treadmill where aerosol
products are used or oxygen is administered.
14. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
15. The pulse sensor is not a medical device.
Various factors, including the user’s movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
7. The treadmill should be used only by persons
weighing 115 kg (250 lbs.) or less. Never
allow more than one person on the treadmill
at a time.
8. Wear appropriate exercise clothes whilst
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended
for both men and women. Always wear athletic shoes. Never use the treadmill with bare
feet, wearing only stockings, or in sandals.
16. Never leave the treadmill unattended whilst it
is running. Always remove the key, unplug
the power cord, and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 5 for the location of the on/off switch.)
17. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADMILL on page 24.)
You must be able to safely lift 20 kg (45 lbs.)
to raise, lower, or move the treadmill.
9. When connecting the power cord (see page
10), plug the power cord into an earthed circuit. No other appliance should be on the
same circuit. When replacing the fuse, an
ASTA approved BS1362 type should be fitted
to the fuse carrier. A 13 amp fuse should be
used.
18. When folding or moving the treadmill, make
sure that the storage latch is fully closed.
3
SUGGESTED STRETCHES
19. Whilst using iFIT.com CDs and videos, an
electronic “chirping” sound will alert you
when the speed and/or incline of the treadmill
is about to change. Always listen for the
“chirp” and be prepared for speed and/or incline changes. In some instances, the speed
and/or incline may change before the personal trainer describes the change.
22. Inspect and properly tighten all parts of the
treadmill every three months.
23. Never drop or insert any object into any
opening.
24.
DANGER: Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the
maintenance and adjustment procedures described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service representative only.
20. Whilst using iFIT.com CDs and videos, you
can manually override the speed and incline
settings at any time by pressing the speed
and incline buttons. However, when the next
“chirp” is heard, the speed and/or incline will
change to the next settings of the CD or video
program.
21. Always remove iFIT.com CDs and videos from
your CD player or VCR when you are not
using them.
25. The treadmill is intended for in-home use
only. Do not use the treadmill in any
commercial, rental, or institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce.
1. Toe Touch Stretch
1
Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts, then
relax. Repeat 3 times. Stretches: Hamstrings, back of knees and
back.
2. Hamstring Stretch
2
Sit with one leg extended. Bring the sole of the opposite foot toward
you and rest it against the inner thigh of your extended leg. Reach
toward your toes as far as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Hamstrings, lower back and
groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat 3
times for each leg. To cause further stretching of the achilles tendons, bend your back leg as well. Stretches: Calves, achilles tendons and ankles.
3
4
4. Quadriceps Stretch
The decals shown below have been placed on your treadmill. If a decal is missing
or illegible, please call our Customer Service Department to order a free replacement decal. Apply the decal in the location shown. Note: The decals are not shown
actual size.
With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your buttocks as possible. Hold for 15 counts, then relax. Repeat 3 times for
each leg. Stretches: Quadriceps and hip muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward. Pull
your feet toward your groin area as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip
muscles.
4
29
5
BEFORE YOU BEGIN
EXERCISE GUIDELINES
WARNING:
Before beginning this
or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with preexisting health problems.
The pulse sensors are not medical devices.
Various factors, including your movement,
may affect the accuracy of heart rate readings.
The sensors are intended only as exercise aids
in determining heart rate trends in general.
The following guidelines will help you to plan your exercise program. For more detailed exercise information, obtain a reputable book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recommended heart rates for fat burning and aerobic exercise.
To find the proper heart rate for you, first find your age
near the bottom of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age. The three numbers define your “training zone.” The lower two numbers are recommended
heart rates for fat burning; the higher number is the
recommended heart rate for aerobic exercise.
To measure your heart rate during exercise, use the
pulse sensor. If your heart rate is too high or too low,
adjust the speed and incline of the treadmill.
Fat Burning
To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for en-
For maximum fat burning, adjust the speed and incline
of the treadmill until your heart rate is near the middle
number in your training zone.
Congratulations for purchasing the PROFORM® 560
HR treadmill. The 560 HR treadmill offers an impressive array of features to help you achieve your fitness
goals in the convenience of your home. From the advanced console to the cushioned walking platform, the
560 HR treadmill is designed to make each workout
more effective and enjoyable. And when you’re not exercising, the treadmill can be folded away, taking less
than half the floor space of conventional treadmills.
Aerobic Exercise
For your benefit, read this manual carefully before
ergy. Only after the first few minutes does your body
begin to use stored fat calories for energy. If your goal
is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in
your training zone.
If your goal is to strengthen your cardiovascular system, your exercise must be “aerobic.” Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the speed and incline of the treadmill until your
heart rate is near the highest number in your training
zone.
WORKOUT GUIDELINES
using the treadmill. If you have questions after reading this manual, please call our Customer Service
Department at 08457 089 009. To help us assist you,
please note the product model number and serial number before calling. The model number of the treadmill
is PETL50130. The serial number can be found on a
decal attached to the treadmill (see the front cover of
this manual for the location).
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Fan
Accessory Tray
Console
Handrail
Handgrip Pulse Sensor
Latch Knob
Key/Clip
Each workout should include the following three parts:
A Warm-up—Start each workout with 5 to 10 minutes
of stretching and light exercise. A proper warm-up increases your body temperature, heart rate and circulation in preparation for exercise.
Training Zone Exercise—After warming up, increase
the intensity of your exercise until your pulse is in your
training zone for 20 to 60 minutes. (During the first few
weeks of your exercise program, do not keep your
pulse in your training zone for longer than 20 minutes.)
Breathe regularly and deeply as you exercise—never
hold your breath.
A Cool-down—Finish each workout with 5 to 10 minutes of stretching to cool down. This will increase the
flexibility of your muscles and will help prevent postexercise problems.
Circuit Breaker
On/Off switch
Walking Belt
Foot Rail
BACK
Cushioned Walking Platform
RIGHT SIDE
EXERCISE FREQUENCY
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest between workouts. After a few months, you may complete up to five workouts each week if desired. The key
to success is to make exercise a regular and enjoyable
part of your everyday life.
28
Rear Roller
Adjustment Bolts
5
PROBLEM: The walking belt is off-centre or slips when walked on
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the
top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,
non-abrasive cleaner.
Assembly requires the included hex keys and your own phillips screwdriver
ters
, rubber mallet
, and adjustable spanner
.
1 1/4” Bolt (104)–4
b. If the walking belt slips when walked on, first remove the
key and UNPLUG THE POWER CORD. Using the allen
wrench, turn both rear roller bolts clockwise 1/4 of a turn.
When the walking belt is correctly tightened, you should
be able to lift each side of the walking belt 5–7 cm (2–3 in.)
off the walking platform. Be careful to keep the walking
belt centred. Plug in the power cord, insert the key, and
walk on the treadmill for a few minutes. Repeat until the
walking belt is properly tightened.
b
PROBLEM: The displays of the console do not function properly
2” Silver Screw (93)–2
1 1/4” Screw (92)–2
a
wire cut-
For help identifying the assembly hardware, refer to the drawings below. Note: The assembly hardware and other
small parts are packaged in separate part bags. Do not open the part bags until instructed to do so. (The
part bags are not labeled according to the order in which they are to be opened.) If a part is not found in
the part bags, check to see if the part has been preassembled.
3/4” Screw (6)–16
SOLUTION: a. If the walking belt is off-centre, first remove the key and
UNPLUG THE POWER CORD. If the walking belt has
shifted to the left, use the allen wrench to turn the left
rear roller bolt clockwise 1/2 of a turn; if the walking belt
has shifted to the right, turn the bolt counterclockwise
1/2 of a turn. Be careful not to overtighten the walking belt.
Plug in the power cord, insert the key and run the treadmill
for a few minutes. Repeat until the walking belt is centred.
SOLUTION: a. Remove the key from the console and UNPLUG THE
POWER CORD. With the help of a second person,
carefully tip the Base (109) down as shown. Remove
the four Long Belly Pan Screws (121). Note: A phillips
screwdriver with at least a 5” shaft is required.
Wheel Bolt (107)–2
a
121
121
1” Bolt (71)–2
Internal Star
Washer (72)–6
Wheel Nut (21)–2
1. Open part bag B. Identify the Right Upright (82) (the
Left Upright [69] has a large round hole in the location
shown). Lay the Right Upright flat, and cut the plastic
ties off the lower end. Next, feed the Wire Harness (83)
into the bottom of the Right Upright and pull it out of the
hole in the top. Note: There may be a tie on the end of
the Wire Harness to help you pull it through the hole.
Attach the Right Upright (82) to the bracket on the right
side of the Base (109) with two 1 1/4” Bolts (104) and
two Internal Star Washers (72). (Note: It may be helpful
to use a rubber mallet to fully insert the Right Upright
into the bracket.) Do not tighten the Bolts yet. Be
careful not to damage the Wire Harness.
Attach the Left Upright (69) to the left side of the
Base (109) in the same way. Note: There is not a wire
harness on the left side.
6
109
With the help of a second person, carefully raise the
Upright (82) as shown. Carefully pivot the Hood (39)
off.
1
39
82
83
82
69
Locate the Reed Switch (24) and the Magnet (18) on
the left side of the Pulley (120). Turn the Pulley until
the Magnet is aligned with the Reed Switch. Make
sure that the gap between the Magnet and the
Reed Switch is about 3 mm (1/8 in.). If necessary,
loosen the Screw (25) and move the Reed Switch
slightly. Retighten the Screw. Reattach the Hood, and
run the treadmill for a few minutes to check for a correct speed reading.
Bracket
Hole
72
104
109
27
3 mm
25
24
Top
View
120
18
TROUBLESHOOTING
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please call our Customer Service Department.
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet. (See page 10.) If an extension cord is needed, use only a 3-conductor, 1 mm2 (14-gauge) cord that is no longer than 1.5
m (5 ft.). Important: The treadmill is not compatible with GFCI-equipped outlets.
2. Open part bag C. See drawing 2a. Attach a Wheel (108)
to each Wheel Housing (106) with a Wheel Bolt (107)
and a Wheel Nut (21) as shown. Do not overtighten the
Wheel Nuts.
See drawing 2b. Insert a Wheel Housing (106) into the
Base (109). (Note: It may be helpful to use a rubber mallet
to fully insert the Wheel Housing.) Next, press a Base
Endcap (99) into the Base.
2a
106
106
107
21
108
108
2b
99
Repeat this step on the opposite side of the treadmill.
109
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.
c. Check the circuit breaker located on the treadmill
near the power cord. If the switch protrudes as
shown, the circuit breaker has tripped. To reset the
circuit breaker, wait for five minutes and then press
the switch back in.
d. Check the on/off switch located on the treadmill
near the power cord. The switch must be in the on
position.
c
Tripped
106
3. With the help of a second person, carefully tip the
Uprights (69, 82) down so the treadmill pivots on the
Wheels (108) as shown.
Reset
3
On
Position
6
69
100
Tighten a 3/4” Screw (6) into one side of the Base (109)
and one of the Wheel Housings (106). Attach a long Rear
Base Pad (105) and a short Front Base Pad (100) to the
Base with four additional 3/4” Screws (6) as shown.
d
107
PROBLEM: The power turns off during use
Repeat this step on the opposite side of the treadmill.
SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see c. above). If the
circuit breaker has tripped, wait for five minutes and then press the switch back in.
With the help of a second person, carefully raise the
Uprights (69, 82) to the vertical position.
82
100
109
6
105
106
109
b. Make sure that the power cord is plugged in. If it is plugged in, unplug it, wait for five minutes, and
then plug it back in.
108 6
6 105
c. Remove the key from the console. Reinsert the key fully into the console.
6
d. Make sure that the on/off switch is in the on position.
106
e. If the treadmill still will not run, please call our Customer Service Department.
PROBLEM: The walking belt slows when walked on
SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm (14-gauge) cord that is no longer
than 1.5 m (5 ft.).
2
b. If the walking belt is overtightened, treadmill performance
may decrease and the walking belt may be permanently
damaged. Remove the key and UNPLUG THE POWER
CORD. Using the included allen wrench, turn both rear
roller adjustment bolts counterclockwise 1/4 of a turn.
When the walking belt is properly tightened, you should
be able to lift the edges of the walking belt 5–7 cm (2–3
in.) off the walking platform. Be careful to keep the walking belt centred. Plug in the power cord, insert the key
and run the treadmill for a few minutes. Repeat until the
walking belt is properly tightened.
26
b
5–7 cm
4. Open part bag A. With the help of a second person,
hold the Console Base (85) near the Uprights (69, 82) as
shown.
Connect the Wire Harness (83) to the wire harness in
the Right Handrail Bracket (113). Make sure to connect
the connectors properly (see the inset drawing). The
connectors should slide together easily and snap
into place. If the connectors do not slide together easily
and snap into place, turn one connector and try to connect them again. IF THE CONNECTORS ARE NOT
CONNECTED PROPERLY, THE CONSOLE MAY BE
DAMAGED WHEN THE POWER IS TURNED ON.
Insert the wires harnesses into the Right Upright (82).
108
4
71
72
73
85
71
69
72
83
Rear Roller Adjustment Bolts
Hold the Handrail Brackets (73, 113) on top of the
Uprights (69, 82). Finger tighten two 1” Bolts (71) with
Internal Star Washers (72) into the Handrail Brackets
and the tops of the Uprights as shown. Press the
Handrail Brackets towards the centre of the treadmill. Then, tighten both Bolts.
7
113
82
83
5. Hold the Pulse Bar (125) near the Console Base (85).
Connect the Pulse Wire (124) on the Pulse Bar to the indicated wire on the Console Base. The connectors
should slide together easily and snap into place. If
the connectors do not slide together easily and snap into
place, turn one connector and try to connect them again.
Insert the wires into the hole in the Console Base.
HOW TO LOWER THE TREADMILL FOR USE
5
1. Hold the treadmill firmly with your right hand. Pull the
latch knob to the left and hold it. Pivot the treadmill down
until the frame is past the latch pin.
Have a second person hold the Pulse Bar (125) firmly on
the Console Base (85). Attach the Pulse Bar to the
Console Base with two 1 1/4” Screws (92) in the locations shown. Be careful not to damage the Pulse
Wire (124) or the wire on the Console Base. Next,
tighten two 2” Silver Screws (93) into the Console Base
and the Pulse Bar in the locations shown. Note: The
correct Screws must be used in the correct locations, or the Pulse Bar may be damaged.
6. Identify the Left and Right Handrails (68, 81) (see the
end views of the Handrails in the inset drawing). The
curved edges of the Handrails should be on the outside.
Latch
Knob
93
92
125
Latch
Pin
124
93
85
Frame
124
92
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. To decrease the possibility of injury, bend your legs and keep your back straight.
6
68
Slide the Right Handrail (81) onto the Right Handrail
Bracket (113), and press the lip on the front of the Right
Handrail under the Console Base (85). (Note: It may be
helpful to tip the Right Handrail and to tap it with a rubber mallet to correctly position it.) Tighten three 3/4”
Screws (6) into the Right Handrail as shown. Note: It
may be necessary to move the lower end of the Right
Handrail slightly to align the lower screw hole.
6
Lip
85
81
Curved Edge
113
Attach the Left Handrail (68) in the same way.
6
See assembly step 1. Tighten the four 1 1/4” Bolts
(104).
7. Press the Latch Knob Sleeve (75) into the Left Upright
(69). Note: It may be helpful to use a rubber mallet to
fully insert the Latch Knob Sleeve.
Remove the Latch Knob (70) from the Latch Pin (80).
Make sure that the Latch Pin Collar (76) and the Spring
(77) are on the Latch Pin. (Note: If there are two Latch
Pin Collars, place one on each side of the Spring.) Insert
the Latch Pin into the Left Upright (69) and tighten the
Latch Knob onto the Latch Pin.
(81)
(68)
7
70
77
76
75
80
69
8. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may
be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the
walking belt (see page 27). To protect the floor or carpet, place a mat under the treadmill.
8
25
HOW TO FOLD AND MOVE THE TREADMILL
If you purchase the optional chest pulse sensor (see page 23), follow the steps below to install the receiver and the short jumper wire included with the chest pulse sensor.
HOW TO FOLD THE TREADMILL FOR STORAGE
1. Make sure that the power cord is unplugged. Remove
the indicated 3/4” Screw (6) and the Access Door (94) from
the back of the Console Back (95).
Before folding the treadmill, adjust the incline to the
lowest position. If this is not done, the treadmill may be
permanently damaged. Next, unplug the power cord.
CAUTION: You must be able to safely lift 20 kg (45 lbs.) to
raise, lower, or move the treadmill.
2. Remove the paper from the adhesive pad on the back of
the receiver (A). Hold the receiver so the small cylinder is near the lower edge of the receiver and is facing the Console (88) as shown. Firmly press the receiver onto the indicated corner of the Access Door (94).
Connect the wire on the receiver to the indicated wire extending from the Console.
1. Hold the treadmill in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep
your back straight. As you raise the treadmill, make sure
to lift with your legs rather than your back. Raise the
treadmill about halfway to the vertical position.
3. Make sure that no wires are pinched. Reattach the
Access Door (94) with the 3/4” Screw (6). The other wires
included with the receiver may be discarded.
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the latch knob to
the left and hold it. Raise the treadmill until the frame is past
the latch pin. Slowly release the latch knob. Make sure that
the frame is securely held by the latch pin.
To protect the floor or carpet from damage, place a mat
under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position
in temperatures above 30°C (85°F).
Latch
Knob
Latch
Pin
Frame
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the frame is
securely held by the latch pin.
1. Hold the upper ends of the handrails. Place one foot on the
base as shown.
2. Tilt the treadmill back until it rolls freely on the front wheels.
Carefully move the treadmill to the desired location. To reduce the risk of injury, use extreme caution whilst moving the treadmill. Do not move the treadmill over an uneven surface.
3. Place one foot on the base, and carefully lower the treadmill
until it is resting in the storage position.
24
Base
9
95
A
Wire
Cylinder
88
Wire
94
6
THE INFORMATION MODE/DEMO MODE
TREADMILL OPERATION
THE PERFORMANT LUBETM WALKING BELT
Your treadmill features a walking belt coated with PERFORMANT LUBETM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such
substances will deteriorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
1
Socket on treadmill
This product must be earthed. If it should malfunction or break
down, earthing provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped
with a power cord having an equipment-earthing conductor and a
earthing plug.
Two power cords are included. Select the one that will fit your
outlet. See drawing 1. Plug the indicated end of the power cord
into the socket on the treadmill. Next, lift the tab on the ferrite
box and clamp the ferrite box around the power cord. Fasten
the included plastic tie just behind the ferrite box and cut off the
excess plastic tie. The plastic tie will prevent the ferrite box
from sliding along the power cord. See drawing 2. Plug the
power cord into an appropriate outlet that is properly installed
and earthed in accordance with all local codes and ordinances.
Important: The treadmill is not compatible with GFCI-equipped
outlets.
Ferrite Box
Plastic Tie
Tab
2
Outlet
Important: If the power cord is damaged, it must be replaced with a
manufacturer-recommended power cord.
DANGER: Improper connection of the equipment-earthing conductor can result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as
to whether the product is properly earthed. Do not modify the plug provided with the product—if it will
not fit the outlet, have a proper outlet installed by a qualified electrician.
10
console is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the displays and indicators on the console will automatically light in a preset sequence, although the
buttons on the console will not operate. If a “d” appears
in the Heart Rate display whilst the information
mode is selected, press the Speed – button so the
display is blank.
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been used and the total number of miles that the walking belt has moved. The information mode also allows
you to switch the console from miles per hour to kilometres per hour. In addition, the information mode allows you to turn on and turn off the demo mode.
To exit the information mode, remove the key from the
console.
To select the information mode, hold down the Stop
button whilst inserting the key into the console. When
the information mode is selected, the following information will be shown:
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor provides hands-free operation and allows you to use the console’s heart rate
programs. To purchase a chest pulse sensor, call
08457 089 009.
The Calories/Distance display will show the total number of miles (or kilometres)
that the walking belt has
moved.
The Pace/Time display will
show the total number of
hours the treadmill has been
used.
An “E” for English or an “M”
for metric will appear in the
Speed display. Press the
Speed + button to change
the unit of measurement.
IMPORTANT: The Heart Rate display should be
blank. If a “d” appears in the display, the console is in
the “demo” mode. This mode is intended to be used
only when a treadmill is displayed in a store. Whilst the
23
Hold the handrails, step onto the walking belt, and
begin walking. During the program, an electronic
“chirping” sound will alert you when the speed
and/or incline of the treadmill is about to change.
CAUTION: Always listen for the “chirp” and be
prepared for speed and/or incline changes.
HOW TO USE PROGRAMS DIRECTLY FROM
OUR WEB SITE
To use programs from our Web site, the treadmill must
be connected to your home computer. See HOW TO
CONNECT YOUR COMPUTER on page 19. In addition, you must have an internet connection and an internet service provider. A list of specific system requirements is found on our Web site.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console. However, when the next “chirp” is
heard, the speed and/or incline will change to
the next settings of the program.
Follow the steps below to use a program from our
Web site.
1
To stop the walking belt at any time, press the
Stop button on the console. The Pace/Time display will begin to flash. To restart the program,
press the Start button or the Speed + button. After
a moment, the walking belt will begin to move at 1
mph. When the next “chirp” is heard, the speed
and incline will change to the next settings of
the program.
Insert the key into the console.
See HOW TO TURN ON THE POWER on page 12.
2
Select the iFIT.com mode.
When the key is inserted, the manual
mode will be selected.
To use a program from
our Web site, press the
iFIT.com button. The indicator on the button will light.
3
Go to your computer and start an internet
connection.
4
Start your web browser, if necessary, and go to
our Web site at www.iFIT.com.
5
Follow the desired links on our Web site to select a program.
When the program is completed, the walking belt
will stop and the Pace/Time display will begin to
flash. Note: To use another program, press the
Stop button and go to step 5.
Note: If the speed or incline of the treadmill
does not change when a “chirp” is heard, make
sure that the iFIT.com indicator is lit and that
the Pace/Time display is not flashing. In addition, make sure that the audio cable is properly
connected, that it is fully plugged in, and that it
is not wrapped around a power cord.
8
Read and follow the on-line instructions for using a
program.
6
Follow your progress with the matrix and the
displays.
See step 5 on page 12.
Follow the on-line instructions to start the
program.
9
When you start the program, an on-screen countdown will begin.
7
Fan Button
When you are finished exercising, remove the
key from the console.
See step 7 on page 15.
Return to the treadmill and stand on the foot
pads. Find the clip attached to the key and slide
the clip onto the waistband of your clothes.
Clip
Key
Note: If there are sheets of clear plastic on the console, remove them.
FEATURES OF THE CONSOLE
The treadmill console offers an impressive array of
features designed to help you get the most from your
workouts.
Whilst the manual mode of the console is selected, the
speed and incline of the treadmill can be changed with
the touch of a button. As you exercise, the console will
display instant exercise feedback. You can even measure your heart rate using the handgrip pulse sensor or
the optional chest pulse sensor (see page 23).
In addition, the console offers four preset programs.
Each program automatically controls the speed and incline of the treadmill as it guides you through an effective workout. Two heart rate programs are also offered.
Each program adjusts the speed and incline of the
treadmill to keep your heart rate near a target heart rate
whilst you exercise.
The console also features iFIT.com interactive technology. Having iFIT.com technology is like having a personal trainer in your home. Using the included audio
cable, you can connect the treadmill to your home
stereo, portable stereo, computer, or VCR and play
special iFIT.com CD and video programs (iFIT.com
CDs and videocassettes are available separately).
iFIT.com CD and video programs automatically control
the speed and incline of the treadmill as a personal
trainer guides you through every step of your workout.
High-energy music provides added motivation. To purchase iFIT.com CDs or videocassettes, visit our
Web site at www.iFIT.com.
With the treadmill connected to your computer, you
can also go to our Web site at www.iFIT.com and access programs directly from the internet. Additional options are soon to be available. See www.iFIT.com for
more information.
To use the manual mode of the console, follow the
steps beginning on page 12. To use a preset program,
see page 14. To use a heart rate program, see page
16. To use an iFIT.com CD or video program, see
page 20. To use iFIT.com programs directly from
our Web site, see page 22.
When the on-screen countdown ends, the program
will begin and the walking belt will begin to move.
22
11
the Speed + and – buttons. Each time a button
is pressed, the speed
setting will change by
0.1 mph; if a button is
held down, the speed
setting will change in increments of 0.5 mph. To
change the speed setting quickly, press the Quick
Speed buttons. Note: The console can display
speed and distance in either miles or kilometres. For simplicity, all instructions in this section refer to miles.
HOW TO TURN ON THE POWER
1
Plug in the power cord (see page 10).
2
Locate the on/off
switch on the treadmill
near the power cord.
Move the on/off switch
to the on position.
3
On
Position
Stand on the foot rails of the treadmill. Find the clip
attached to the key (see the drawing on page 11)
and slide the clip onto the waistband of your
clothes. Next, route the cord attached to the clip
under the handgrip pulse sensor, and insert the
key into the console. After a moment, the displays
and various indicators will light. Test the clip by
carefully taking a few steps backward until the
key is pulled from the console. If the key is not
pulled from the console, adjust the position of
the clip.
To stop the walking belt, press the Stop button.
The Pace/Time display will begin to flash. To
restart the walking belt, press the Start button or
the Speed + button.
Note: The first time the treadmill is used, observe
the alignment of the walking belt, and align the
walking belt if necessary (see page 27).
4
HOW TO USE THE MANUAL MODE
1
Insert the key fully into the console.
5
See HOW TO TURN ON THE POWER above.
2
Select the manual mode.
• If you are using your portable CD player and
the CD skips, set the CD player on the floor or
another flat surface instead of on the console.
To stop the walking belt at any time, press the
Stop button on the console. The Pace/Time display will begin to flash. To restart the program,
press the Start button or the Speed + button. After
a moment, the walking belt will begin to move at 1
mph. When the next “chirp” is heard, the
speed and incline will change to the next settings of the CD or video program.
5
Press the Start button or the Speed + button to
start the walking belt.
6
12
Measure your heart rate if desired.
See step 6 on page 13.
When the CD or video program is completed, the
walking belt will stop and the Pace/Time display
will begin to flash. Note: To use another CD or
video program, press the Stop button or remove
the key and go to step 1 on page 20.
Change the incline of the treadmill as desired.
Note: If the speed or incline of the treadmill
does not change when a “chirp” is heard:
To change the incline of
the treadmill, press the
Incline buttons. Each time
a button is pressed, the
incline will change by
0.5%.
• Make sure that the iFIT.com indicator is lit and
that the Pace/Time display is not flashing. If
the Pace/Time display is flashing, press the
Start button or the Speed + button on the
console.
Follow your progress with the matrix and the
displays.
• Adjust the volume of your CD player or VCR.
If the volume is too high or too low, the console may not detect the program signals.
7
Turn on the fan if desired.
See step 7 on page 13.
8
When you are finished exercising, remove the
key from the console.
See step 7 on page 15.
CAUTION: Always remove iFIT.com CDs and
videocassettes from your CD player and VCR
when you are finished using them.
Incline display—This
display shows the incline
level of the treadmill.
A moment after the button is pressed, the walking
belt will begin to move at 1 mph. Hold the handrails
and begin walking. As you exercise, change the
speed of the walking belt as desired by pressing
Follow your progress with the matrix and the
displays.
See step 5 on page 12.
The matrix—When the
manual mode or the
iFIT.com mode is selected, the matrix will
display a 1/4-mile (400
m) track. As you exercise, the indicators
around the track will light in succession until the
entire track is lit. The track will then darken and
the indicators will again begin to light in succession.
When the key is inserted, the manual
mode will be selected
and the indicator on the
Manual Control button
will light. If you have selected a program, press the Manual Control button
to reselect the manual mode.
3
• Make sure that the audio cable is properly
connected, that it is fully plugged in, and that
it is not wrapped around a power cord.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console. However, when the next “chirp” is
heard, the speed and/or incline will change to
the next settings of the CD or video program.
21
HOW TO CONNECT YOUR VCR
HOW TO USE IFIT.COM CD AND VIDEO
PROGRAMS
Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 19.
To use iFIT.com CDs or videocassettes, the treadmill
must be connected to your portable CD player, portable
stereo, home stereo, computer with CD player, or
VCR. See HOW TO CONNECT THE TREADMILL TO
YOUR CD PLAYER, VCR, OR COMPUTER on pages
18 to 20. Note: To purchase iFIT.com CDs or videocassettes, visit our Web site at www.iFIT.com.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the AUDIO OUT jack on your
VCR.
Follow the steps below to use an iFIT.com CD or video
program.
A
1
ANT. IN
VIDEO AUDIO
IN
RF OUT
CH
3 4
OUT
Insert the key into the console.
See HOW TO TURN ON THE POWER on page 12.
AUDIO OUT
Heart Rate display—
This display shows
your heart rate when
you use the handgrip
pulse sensor or the
optional chest pulse
sensor.
6
To use the handgrip pulse sensor, first make
sure that your
hands are clean.
Next, stand on
the foot rails
Contacts
and hold the
handgrip pulse
sensor with your palms on the metal contacts.
Avoid moving your hands. When your pulse is
detected, two dashes (– –) will appear in the Heart
Rate display, and then your heart rate will be
shown. For the most accurate heart rate reading, continue to hold the contacts for about 15
seconds.
Speed display—This
display shows the
speed of the walking
belt. Note: When the
Metric indicator beside
the display is lit, the
console will display speed and distance in kilometres; when the Metric indicator is not lit, the console will display speed and distance in miles. To
change the unit of measurement, see THE INFORMATION MODE/DEMO MODE on page 23.
RIGHT
LEFT
Audio
Cable
2
Adapter
Select the iFIT.com mode.
When the key is inserted, the manual
mode will be selected.
To use iFIT.com CDs or
videocassettes, press
the iFIT.com button. The
indicator on the button will light.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA Y-adapter (available
at electronics stores). Next, remove the wire that is
currently plugged into the AUDIO OUT jack on your
VCR and plug the wire into the unused side of the
RCA Y-adapter. Plug the RCA Y-adapter into the
AUDIO OUT jack on your VCR.
3
Insert the iFIT.com CD or videocassette.
If you are using an iFIT.com CD, insert the CD
into your CD player. If you are using an iFIT.com
videocassette, insert the videocassette into your
VCR.
A
4
B
Press the PLAY button on your CD player or
VCR.
ANT. IN
VIDEO AUDIO
IN
A moment after the button is pressed, your personal trainer will begin guiding you through your
workout. Simply follow your personal trainer’s
instructions. Note: If the Pace/Time display is
flashing, press the Start button or the Speed +
button on the console. The treadmill will not respond to a CD or video program whilst the
Pace/Time display is flashing.
RF OUT
CH
3 4
OUT
RCA Y-adapter
Audio
Cable
Adapter
Wire removed from
AUDIO OUT jack
7
Calories/Distance display—This display
shows the approximate
number of calories you
have burned and the
distance that you have
walked or run. The display will change from one
number to the other every few seconds, as shown
by the indicators beside the display.
Turn on the fan if desired.
To turn on the fan, press the button below the fan.
To turn on the fan at high speed, press the button
a second time. To turn off the fan, press the button a third time. Note: A few minutes after the
walking belt is stopped, the fan will automatically
turn off.
8
Pace/Time display—
Whilst the manual
mode or the iFIT.com
mode is selected, this
display will show your
pace (in minutes per
mile) and the elapsed time. Whilst a program is selected (except for the heart rate Self Select program), the display will show your pace and the
time remaining in the program. The display will
change from one number to the other every few
seconds, as shown by the indicators beside the
display.
When you are finished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to the lowest
setting. The incline must be at the lowest setting
when the treadmill is folded to the storage position or the treadmill will be damaged. Next, remove the key from the console and put it in a secure place. Note: If the displays and various indicators on the console remain lit after the key is
removed, the console is in the “demo” mode.
See page 23 and turn off the demo mode.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position and unplug the power cord.
To reset the displays, press the Stop button, remove the key, and then reinsert the key.
During the CD or video program, an electronic
“chirping” sound will alert you when the speed
and/or incline of the treadmill is about to change.
CAUTION: Always listen for the “chirp” and be
prepared for speed and/or incline changes. In
some instances, the speed and/or incline may
change before the personal trainer describes
the change.
20
Measure your heart rate if desired.
13
The speed setting for the
first segment is shown in
the flashing Current
Segment column of the
matrix. (The incline settings are not shown in
the matrix.) The speed
settings for the next four
segments are shown in
the columns to the right.
HOW TO USE PRESET PROGRAMS
1
Insert the key fully into the console.
See HOW TO TURN ON THE POWER on
page 12.
2
Select one of the preset programs.
When the key is inserted, the manual
mode will be selected.
To select a preset program, press the right
Select Program button
repeatedly until one of
the four preset program indicators lights.
When only three seconds remain in the first segment of the program, both the Current Segment
column and the column to the right will flash and a
series of tones will sound. If the speed and/or incline of the treadmill is about to change, the Speed
display and/or the Incline display will flash to alert
you. When the first segment ends, all speed settings will move one column to the left. The speed
setting for the second segment will then be shown
in the flashing Current Segment column and the
treadmill will automatically adjust to the speed and
incline settings for the second segment. Note: If all
of the indicators in the Current Segment column
are lit after the speed settings have moved to the
left, the speed settings may move downward so
that only the highest indicators appear in the matrix. If some of the indicators in the Current
Segment column are not lit when the speed settings move to the left again, the speed settings will
move back up.
The diagrams beside the preset program indicators show how the speed and incline of the treadmill will change during the preset programs. When
a preset program is selected, the Speed display
will flash the maximum speed setting of the program for a few seconds, and the Incline display will
flash the maximum Incline setting. The Pace/Time
display will show how long the program will last.
The matrix will show
the first four speed settings of the program.
3
The program will continue in this way until the
speed setting for the last segment is shown in the
Current Segment column of the matrix and the
last segment ends. The walking belt will then slow
to a stop.
Press the Start button or the Speed + button to
start the program.
HOW TO CONNECT YOUR HOME STEREO
HOW TO CONNECT YOUR COMPUTER
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
Note: If your computer has a 3.5 mm LINE OUT
jack, see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the adaptor. Plug the
adaptor into the LINE OUT jack on your stereo.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your computer.
Current Segment
A
A
CD
VCR
LINE OUT
Amp
LINE OUT
LINE OUT
Audio
Cable
Audio
Cable
Adaptor
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the splitter. Plug the splitter into the PHONES jack on your computer. Plug
your headphones or speakers into the other side of
the splitter.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the adaptor. Plug the
adaptor into an RCA Y-adaptor (available at electronics stores). Next, remove the wire that is currently plugged into the LINE OUT jack on your
stereo and plug the wire into the unused side of the
Y-adaptor. Plug the Y-adaptor into the LINE OUT
jack on your stereo.
B
PHONES
B
CD
Audio
Cable
VCR
If the speed or incline setting is too high or too low
at any time during the program, you can manually
override the setting by pressing the Speed or
Incline buttons. Every few times a Speed button is
pressed, an additional indicator will light or darken
in the Current Segment column. (If any of the
columns to the right of the Current Segment column have the same number of lit indicators as the
Current Segment column, an additional indicator
may light or darken in those columns as well.)
Note: When the next segment of the program
begins, the treadmill will automatically adjust
to the speed and incline settings for the next
segment.
A moment after the button is pressed, the treadmill will automatically adjust to the first speed and
incline settings of the program. Hold the handrails
and begin walking.
Each program is divided into several time segments of different lengths. One speed setting and
one incline setting are programmed for each segment. Note: The same speed setting and/or incline setting may be programmed for two or more
consecutive segments.
14
Amp
Splitter
LINE OUT
Headphones/Speakers
Audio
Cable
RCA
Y-adaptor
Adaptor
Wire removed from
LINE OUT jack
19
HOW TO CONNECT YOUR PORTABLE STEREO
HOW TO CONNECT THE TREADMILL TO YOUR
CD PLAYER, VCR, OR COMPUTER
Note: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
3.5 mm LINE OUT jack, see instruction B. If your
stereo has only a PHONES jack, see instruction C.
To use iFIT.com CDs, the treadmill must be connected
to your portable CD player, portable stereo, home
stereo, or computer with CD player. See pages 18 and
19 for connecting instructions. To use iFIT.com videocassettes, the treadmill must be connected to your
VCR. See page 20 for connecting instructions. To use
iFIT.com programs directly from our Web site, the
treadmill must be connected to your home computer.
See page 19 for connecting instructions.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the adaptor. Plug the
adaptor into an AUDIO OUT jack on your stereo.
4
6
A
5
AUDIO OUT
7
Follow your progress with the displays.
Measure your heart rate if desired.
See step 6 on page 13.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position and unplug the power cord.
LEFT
Audio
Cable
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your CD player. Plug your headphones into the
PHONES jack.
Adaptor
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your stereo.
A
PHONES LINE OUT
PHONES
B
Headphones
Audio
Cable
LINE OUT
Audio
Cable
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the splitter. Plug the splitter into the PHONES jack on your CD player. Plug
your headphones into the other side of the splitter.
C. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the splitter. Plug the splitter into the PHONES jack on your stereo. Plug your
headphones into the other side of the splitter.
B
PHONES
C
PHONES
Audio
Cable
Splitter
PHONES
Audio
Cable
Headphones
Splitter
Headphones
18
When you are finished exercising, remove the
key from the console.
When the program ends, make sure that the incline of the treadmill is at the lowest setting.
Next, remove the key from the console and put it in
a secure place. Note: If the displays and various
indicators on the console remain lit after the
key is removed, the console is in the “demo”
mode. See page 23 and turn off the demo mode.
RIGHT
Note: If your CD player has separate LINE OUT and
PHONES jacks, see instruction A below. If your CD
player has only one jack, see instruction B.
Turn on the fan if desired.
See step 7 on page 13.
See step 5 on page 12.
HOW TO CONNECT YOUR PORTABLE CD PLAYER
LINE OUT
To stop the program at any time, press the Stop
button. The Pace/Time display will begin to flash.
To restart the program, press the Start button or
the Speed + button. The walking belt will begin to
move at 1 mph. When the next segment of the program begins, the treadmill will automatically adjust
to the speed and incline settings for the next segment.
15
During heart rate programs, the matrix will
show a moving graphic
that represents your
heart rate. Each time a
heartbeat is detected,
an additional peak will
appear.
HOW TO USE HEART RATE PROGRAMS
CAUTION: If you have heart problems, or if you are over 60 years of age and
have been inactive, do not use the heart rate
programs. If you are taking medication regularly, consult your physician to find whether
the medication will affect your exercise heart
rate.
1
4
When a heart rate program is selected, the
word “AGE” and the current age setting will flash
in the Heart Rate display. If you have already
entered your age, simply press the Enter button. If
you have not entered your age, press the + and –
buttons beside the Enter button to enter your age.
Then, press the Enter button.
Put on the optional chest pulse sensor (see
page 23).
You must wear the optional chest pulse sensor
to use a heart rate program.
2
Insert the key fully into the console.
See HOW TO TURN ON THE POWER on
page 12.
3
Enter your age.
5
Enter a maximum speed.
After you have entered
your age, the letters
“SPd” and the maximum
speed setting of the program will flash in the
Heart Rate display. If
desired, press the + and – buttons beside the
Enter button to change the maximum speed setting. When the desired setting is shown, press the
Enter button.
Select a heart rate program.
When the key is inserted, the manual
mode will be selected.
To select a heart rate
program, press the left
Select Program button
repeatedly until one of
the two heart rate program indicators lights.
If the 85% Max. program is selected, go to step
7. If the Self Select program is selected, go to
step 6.
The diagrams beside the heart rate program indicators show how the target heart rate will change
during the programs. During the 85% Max. program, your heart rate will reach approximately
85% of your estimated maximum heart rate; during the Self Select program, your heart rate will remain near a level that you select.
6
7
the current target heart rate, the speed and/or incline of the treadmill may automatically change to
bring your heart rate closer to the target heart rate.
Press the Start button or the Speed + button to
start the program.
A moment after the button is pressed, the treadmill will automatically adjust to the first speed and
incline settings of the program. Hold the handrails
and begin walking.
If your pulse is not detected during the program,
the letters “PLS” will flash in the Heart Rate display and the speed and incline of the treadmill
may automatically decrease until your pulse is detected. If this occurs, see the instructions included
with the optional chest pulse sensor.
Each heart rate program is divided into several time
segments of different lengths. One target heart rate
is programmed for each segment. Note: If the Self
Select program is selected, the same target heart
rate is programmed for all segments.
To stop the program, press the Stop button. Heart
rate programs cannot be stopped temporarily and
then restarted. To use a heart rate program again,
reselect the program and start it at the beginning.
During each segment, the console will regularly
compare your heart rate to the current target heart
rate. If your heart rate is too far below or above
the target heart rate, the speed of the treadmill will
automatically increase or decrease to bring your
heart rate closer to the target heart rate. If the
speed reaches the maximum speed setting of the
program (see step 5 on page 16) and your heart
rate is still too far below the current target heart
rate, the incline of the treadmill will also increase
to bring your heart rate closer to the target heart
rate.
8
See step 5 on page 12.
Note: During heart rate
programs, the display
around the Heart Rate
display will show your
heart rate as a percentage of your estimated
maximum heart rate.
During the last three seconds of each segment, a
series of tones will sound and the Speed display
and the Incline display will flash.
9
16
Turn on the fan if desired.
See step 7 on page 13.
The program will continue until the last segment
ends. The walking belt will then slow to a stop.
you are finished exercising, remove the
10 When
key from the console.
If the speed or incline setting is too high or too low
at any time during the program, you can adjust the
setting with the Speed or Incline buttons. However,
each time the console compares your heart rate to
See step 7 on page 15.
Enter a target heart rate.
After you have entered a
maximum speed setting,
the letters “PLS” and the
target heart rate setting
for the program will flash
in the Heart Rate display. If desired, press the + and – buttons beside
the Enter button to change the target heart rate
setting. When the desired setting is shown, press
the Enter button.
Note: Your estimated maximum heart rate is determined by subtracting your age from 220. For
example, if you are 30 years old, your estimated
maximum heart rate is 190 beats per minute
(220 – 30 = 190).
Follow your progress with the displays.
17
EXPLODED DRAWING—Model No. PETL50130
31*
30
33
32
35
36
37
29
127
1
To identify the parts shown on this EXPLODED
DRAWING, see the PART LIST on pages 30
and 31 of the user’s manual.
34
127
117
24
25
28
27
26
2
R0304A
130 38
23
36
36
36
22
19
3
17
21
18
129
36
66
65
4
9
15
7
6
119
128
16
67
6
40
21
128
131
65
133
21
5 14
8
132
19
20
120
22
66
133
36
9
12
16
13
17
52
10
39
51
50
14
11
55
53
9
6
67
15
64
122
4
49
42
5
61
43
114
60
11
57
123
6
6
8
121
62
13
47
63
6
123
121
1
115
59
58
6
134
47
56
60
46
141
55
61
6
45
44
54
78
116
47
41
121
48
47
6
47
121
EXPLODED DRAWING—Model No. PETL50130
73
74*
118
75
113
88
89
71
77
79
72
80
81
6
69
86
84
37
6
6
68
87
36
71
72
70
86
85
R0304A
135
83
78
92
93
6
82
118
111
125
6
6
6
21
90
95
139
112
111
136
21
110
104
6
137
140
6
138
6
94
6
103
72
100
101
6
83
6
6
106
103
6
107
6
102
101
36
6
72
105
6
6
6
6
99
104
6
109
108
6
100
21
6
98
126
6
106
6
105
21
108
107
6
92
93
99
102
126
124
97
36
6
96
91
Download PDF
Similar pages