Hardness testing equipment
and Seismometers
Hardness testing
equipment
PRE 1306
Stationary and mobile hardness testing equipment
for all areas of application.
Hardness Testing Equipment
CONTENTS
Rockwell hardness testing equipment
Overview· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4
Measuring program for automatic
indentation measurement - VLPAK· · · · · · · 28
Durotwin· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5
AR, ARK and ATK overview· · · · · · · · · · · · · · · · 7
AR-10 / AR-20 · · · · · · · · · · · · · · · · · · · · · · · · · · · 8
Brinell hardness testing equipment
ABK-1· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 29
ARK-600 / ATK-600· · · · · · · · · · · · · · · · · · · · · · · 9
WIZHARD · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 10
Special accessories · · · · · · · · · · · · · · · · · · · · · · · 12
Mobile hardness testing equipment
Rebound hardness testing equipment
HARDMATIC HH-411· · · · · · · · · · · · · · · · · · · · · 30
Vickers hardness testing equipment
Special accessories for HARDMATIC HH-411· · 32
Overview· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 14
AVK-C0 · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 15
Hardness testing equipment for foam,
rubber and plastic
HV-100· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 16
HARDMATIC HH-300 overview · · · · · · · · · · · · 33
Special accessories · · · · · · · · · · · · · · · · · · · · · · 18
HH-300 long version· · · · · · · · · · · · · · · · · · · · · 34
HH-300 compact version · · · · · · · · · · · · · · · · · 35
Mikrovickers hardness testing equipment
Special accessories for HARDMATIC HH-300· · 36
Overview· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 19
HM-100 · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 20
Conversion tables· · · · · · · · · · · · · · · · · · · · · · · 38
HM-200· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 23
Additional information · · · · · · · · · · · · · · · · · · 40
Special accessories · · · · · · · · · · · · · · · · · · · · · · 25
INDEX
Code No.
963-102 R
963-103
810-200D
810-201D
810-218D
810-257D
810-208D
810-202D
810-203D
810-204D
810-160D
810-163D
810-981D
810-165D
810-985D
810-124D
810-125D
810-959D
810-126D
810-969D
810-128D
810-352D
810-353D
VLPAK
810-265-1
810-298
811-335-1
811-337-1
811-336-1
811-338-1
811-331
811-333
811-332
811-336
Model
DUROTWIN DT10
DUROTWIN-PLUS DT20
AR-10
AR-20
ARK-600
ATK-600
Wizhard HR-511
Wizhard HR-521
Wizhard HR-522
Wizhard HR-523
AVK-C0
HV-112
HV-113
HV-114
HV-115
HM-101
HM-102
HM-103
HM-112
HM-113
HM-114
HM-211
HM-221
Page
4
7
9
10
14
16
19
23
ABK-1
HH-411
28
29
30
HH-300
33
3
Rockwell Hardness Testing Equipment
963-102R : DT10 Durotwin
963-103: DT20 Durotwin Plus
810-200D: AR-10
• Sturdy and simple manual operation:
Rockwell, Super Rockwell
(scale N, T) and *Brinell
hardness testing equipment.
• Basic model with
analog display.
Automatic application
and retraction of the
additional test force.
810-201D: AR-20
810-218D: ARK-600
• Basic model with
analog display.
Force is changed using the
handwheel.
• The large and very
clear digital display
reduces reading errors.
810-257D: ATK-600
810-208D: HR-511 Wizhard
810-202D: HR-521 Wizhard
810-203D: HR-522 Wizhard
810-204D: HR-523 Wizhard
• A cost-efficient testing
device that performs 2
different hardness
tests: Rockwell and Super
Rockwell (scale N, T).
• Three different types of
hardness test: Rockwell,
Super Rockwell (scale N, T)
and Brinell* with one
device. With extension
arm for measuring
inaccessible points.
* External optosensoric measurement of indentations for
Brinell hardness testing!
Rockwell Hardness Testing Equipment
Model DT DUROTWIN
Equipment features
Sturdy and easy-to-operate manual device
Applicable for both Rockwell and Super Rockwell (scale N, T) testing
Standard or optional use for Brinell hardness testing
(external optosensoric measurement of the Brinell imprint)
Analog display of the
hardness values
Calibration value
0.5 HR B; C
1.0 HR N; T
Spider for applying
advance test force
Hand lever for applying
additional test force
DT20
DT10
Technical specifications
Model
Durotwin DT10
Code No.
963-102 R
Super Rockwell
Rockwell
(scale N, T)
Test method
Advance test
force
Durotwin Plus DT20
(N)
Total test force (N)
Test force regulation
Display
Max. height of
workpiece
Max. depth of
workpiece
Weight
98,07
29,42
Rockwell
963-103
Super Rockwell
(scale N, T)
98,07
29,42
Brinell
-
294,2 / 306,5 / 612,9 /
1226 / 1839
Manual regulation of test force + additional test force (load, duration, disengagement)
588,4 / 980,7 / 1471
147,1 / 294,2 / 441,3
588,4 / 980,7 / 1471
147,1 / 294,2 / 441,3
Analog
105 mm (with spindle cover)
107 mm (without spindle cover)
Microscope*
150 mm (from the center of the penetrating object)
44 kg
48 kg
* Special accessory
5
Overview of test devices
Model
Durotwin
Durotwin with Brinell retrofit package
Code No.
963–102 R
963–102 R + 56AAE552
Rockwell
Scales A – D – C
Scales A – D – C
(diamond indenter)
(diamond indenter)
Scales F – B – G
Scales F – B – G
(1/16“ steel ball indenter)
(1/16“ steel ball indenter)
Scales H – E – K*
Scales H – E – K*
(1/8“ steel ball indenter)
(1/8“ steel ball indenter)
Super Rockwell (scale N, T) Scales 15N – 30N – 45N
Scales 15N – 30N – 45N
(diamond indenter)
(diamond indenter)
Scales 15T – 30T – 45T
Scales 15T – 30T – 45T
(1/16“ steel ball indenter)
(1/16“ steel ball indenter)
Brinell
Scale HBW1/30
–
(1 mm carbide ball)
Scale HBW2.5/187.5
–
(2.5 mm carbide ball)
–
–
–
–
Durotwin Plus
963–103
Scales A – D – C
(diamond indenter)
Scales F – B – G
(1/16“ steel ball indenter)
Scales H – E – K*
(1/8“ steel ball indenter)
Scales 15N – 30N – 45N
(diamond indenter)
Scales 15T – 30T – 45T
(1/16“ steel ball indenter)
Scale HBW5/125*
(5 mm carbide ball)
Scale HBW2.5/187.5
(2.5 mm carbide ball)
Scale HBW2.5/62.5
(2.5 mm carbide ball)
Scale HBW2.5/31.25
(2.5 mm carbide ball)
* Special accessory
Standard accessories
Special accessories
Code No. 19BAA072Diamond indenter
Code No. 19BAA074
Steel ball indenter 1/16“
– Steel balls 1/16“ (5 balls)
– Flat table Ø 64 mm
– V-Anvil Ø 41 mm,
opening 25 mm
– Dust protection cover
– Hardness test block 60-65 HRC
– Hardness test block 60-64 HR30N
– Adjusting level
Additional standard accessories for Durotwin Plus
Code No. 19BAA279Carbide indenter Ø 2.5 mm
Code No. 19BAA283Replacement carbide indenter Ø 2.5 mm
(1 indenter)
– Hardness test block
350 HBW 2.5/187.5
Code No. 19BAA072 DDiamond indenter
(incl. MPA certificate)
Code No. 19BAA075
Steel ball indenter 1/8“
Code No. 19BAA082
Steel balls 1/16“ (10 balls)
Code No. 19BAA083
Steel balls 1/8“ (10 balls)
Code No. 075202
Round table Ø 200 mm
For further special accessories, see pages 12 and 13
Additional special accessories for Durotwin Plus
Code No. 19BAA280Carbide indenter Ø 5 mm
Code No. 19BAA162Replacement carbide indenter Ø 5 mm
(1 indenter)
Code No. 19BAA318 D Microscope 40 x
Code No. 19BAA319 D Microscope 100 x
Standard accessories for Brinell retrofit package
Code No. 56AAE552
Brinell retrofit package for
963-102 R
Code No. 19BAA277
Carbide Indenter Ø 1 mm
Code No. 19BAA279
Carbide Indenter Ø 2.5 mm
– Hardness test block
350 HBW 2.5/187.5
– Additional weight 187.5
Rockwell Hardness Testing Equipment
Model AR, ARK, ATK
Equipment features
Analog standard models with automatic loading, duration and disengagement of additional test force
Test methods HRA, HRC, HRD (diamond cone) HRF, HRB, HRG (steel ball 1/16”)
Automatic zero positioning of the analog gauge when applying test forces with the spindle wheel
AR-10 Rockwell
AR-20 Rockwell
Calibration value 0.5 HR
Change of test force
Manual
Change of
test force
Handwheel
Manual advance test force
Automatic additional
test force
Equipment features
Digital standard models with automatic loading, duration and disengagement of additional test force
ATK-600 with Rockwell and Super Rockwell (scale N, T) testing
Large LED display with tolerance evaluation function
ARK-600 Rockwell
ATK-600 Rockwell / Super Rockwell (scale N, T)
Digit increments 0.1 HR (Rockwell)
0.2 HR Super Rockwell (scale N, T)
Easy operation using
dust-protected control panel
Sturdy
spindle cover
Evaluation function OK/Not OK
Manual advance test force with
load navigator
Handwheel for changing test force
Data output
RS 232C, SPC (DIGIMATIC)
7
Rockwell Hardness Testing Equipment
Model AR-10 / AR-20
AR-20
AR-10
Standard accessories
Code No. 19BAA072Diamond Indenter AR-10, AR-20
Code No. 19BAA074
1/16“ Steel ball Indenter
Code No. 810-039
Flat table (Ø 64 mm)
Code No. 19BAA111
Dust protection cover
Code No. 19BAA123
Hardness test block (30 - 35HRC)
Code No. 19BAA125
Hardness test block (60 - 65HRC)
Code No. 19BAA126
Hardness test block (90 - 95HRB)
Technical specifications
Code No.
Model
Advance test
N
force
Total test force
N
Conversion of total
test force
Test force regulation
Test force
application time
Display
Function
Max. size of
workpiece
Dimensions
Weight
Power supply
810-200D
AR-10
810-201D
AR-20
98,07
588,4; 980,7; 1471
Advance testforce: fixed, otherwise manual
Advance testforce: fixed, using handwheel
(Set by removing weights)
Advance test force: Manual adjustment
Additional testforce: Automatic (load, duration, disengagement)
Automatic: 3 - 5 s
Manual: At operator’s discretion
Pointer display on scale; smallest calibration value: 0.5 HR
Automatic gauge: No need for zero positioning.
Height: 0 - 140 mm
Height: 0 - 165 mm
(standard flat table)
(standard flat table)
Depth: 115 mm (from the center of the indenter shaft)
approx. 215 (W) x 455 (D) x 682 (H) mm
Depth: 122 mm (from the center of the indenter shaft)
approx. 210 (W) x 486 (D) x 680 (H) mm
approx. 38 kg
approx. 40 kg
230V AC, approx. 30VA or less, 20VA or less for AR-10
Rockwell Hardness Testing Equipment
Model AR-600 / ATK-600
ARK-600
ATK-600
Standard accessories
Code No. 19BAA072Diamond Indenter ARK-600
Code No. 19BAA073Diamond Indenter ATK-600
Code No. 19BAA074
1/16“ steel ball Indenter
Code No. 810-039
Flat table (Ø 64 mm)
Code No. 19BAA111
Dust protection cover
Code No. 19BAA123
Hardness test block (30 - 35HRC)
Code No. 19BAA125
Hardness test block (60 - 65HRC)
Code No. 19BAA126
Hardness test block (90 - 95HRB)
Code No. 19BAA128
Hardness test block (64 - 69HR30N) ATK-600
Code No. 19BAA129
Hardness test block (70 - 79HR30N) ATK-600
Technical specifications
Code No.
Model
Advance test force
Total test force
Conversion of total test force
Test force regulation
Test force application time
Display
Function
External output
Max. size of workpiece
Dimensions
Weight
Power supply
N
810-218D
ARK-600
98,07
810-257D:
ATK-600
29,42, 98,07
N
558,4; 980,7; 1471
147,1; 294,2; 441,3; 588,4;
980,7; 1471
Advance testforce: fixed, otherwise rotary control
Advance test force: Manual, with advance test force monitored by navigator for load application
Additional testforce: Automatic (load, duration, disengagement)
Automatic 3 - 5 s
Manual: At operator’s discretion
Digital 4-digit LED display
Digital 4-digit LED display
Resolution: Rockwell / 0.1 HR
Resolution: 0.1 HR
Super Rockwell (scale N, T) / 0.2 HR
OK/Not OK evaluation function/Navigator function for force application / Correction function for hardness value
RS-232C / SPC (DIGIMATIC)
Height: 0 - 140 mm (standard flat table)
10 - 150 mm (optional round table)
Depth: 122 mm (from the center of the indenter shaft)
approx. 210 (W) x 486 (D) x 680 (H) mm
approx. 210 (W) x 486 (D) x 720 (H) mm
approx. 40 kg
approx. 42 kg
230V AC, approx. 30VA or less
9
Rockwell Hardness Testing Equipment
Model HR Wizhard
The HR-500 series comprises the latest hardness testing equipment fitted with special electronic control to measure 3
different types of hardness: Rockwell, Super Rockwell (scale N, T) and the indenting process for Brinell hardness testing.
Equipment features
Various test forces for Rockwell, Super Rockwell (scale N, T) and Brinell
Electronic real-time load control for precise setting
– this prevents the application of excessive test force
Auto-stop elevator with automatic application of advance test force
Spout-shaped extending arm for better access to inner
and outer surfaces
Graphic presentation of statistical results and
a wide range of statistics.
OK/Not OK evaluation function
Automatic test force selection:
The required hardness test is defined in advance
and the test force selected automatically.
Control unit with
membrane keypad
• The machine allows hardness testing on inner surfaces, which was previously not possible without causing damage.
The smallest measurable diameter
is 34 mm (standard) using the special diamond indenter (19BAA292 optional accessory) Indenter
Indenter
Indenter
• The control panel can be installed on top of the test machine, which is very useful in cramped spaces. This installation requires a special
mounting plate (19BAA295 optional accessory) With touch
screen (Touch-
sensitive control
panel)
Control unit with membrane keypad
• Simple control panel offering only the most important basic functions.
With touch screen
•Control panel offering a wide range
of functions, various statistical
calculation models and graphic
presentation of the test results in addition to the basic functions.
Technical specifications
Codespecifications
No.
Technical
810-208D
HR-511
Model
Advance test force (N)
Total test force (N)
Super Rockwell (scale N,T)
810-202D
HR-521
810-203D
HR-522
29.42; 98.07
810-204D
HR-523
147,1; 294,2; 441,3
Total test force (N)
Rockwell (N)
588,4; 980,7; 1471
Brinell (ball Ø / kg)
HBW 1/10; HBW 1/30; HBW 2.5/6.25;
HBW 2.5/15.625; HBW 2.5/31.25; HBW 2.5/62.5; HBW 2.5/187.5;
HBW 5/25; HBW5/62.5; HBW 5/125; HBW 10/100
HBW 2.5/187.5
Test force regulation
Automatic (load, duration, disengagement)
Vertical table elevation
Motor-driven (manual
operation also possible)
Manual (advance test force with automatic brake)
Control panel
Test force reversal
Test force application time
Control unit
Max. size of workpiece
Touch screen
Switch operated
0 - 120S (in increments of 1 s.)
Height: 250 mm (long version: 395 mm)* Depth: 150 mm (from the center of the intenter shaft)
Min. diameter of pipe-shaped
or ring-shaped sample
Min. caliper: 35mm (if the optional indenter is used: 22 mm)
Hardness value, test conditions,
Hardness value, test conditions, OK/Not OK evaluation result, statistical evaluation,
OK/Not OK evaluation result
XR control chart, translation of a hardness value
Rockwell hardness testing, Super Rockwell (scale N, T) hardness testing, Brinell hardness testing (optional measuring
microscope and optional indenter required)
Conversion function [HV, HK, HR (Rockwell hardness A, B, C, D, F, G /
—
Super Rockwell (scale N, T) 15T, 30T, 45T, 15N, 30N, 45N) tensile strength]
OK/Not OK evaluation
Continuous measuring function (for samples of the same thickness)
Offset correction
Cylindrical, spherical, offset, multi-point offset
Statistical calculations (max./min., average, standard deviation, upper/lower limit, Code No. of OK/Not OK parts) Model
HR-511 only via data output (no display available)
—
Preparation of graphs (XR control charts)
6 languages are supported: German, English, French, Italian, Spanish and Japanese (except HR-511).
RS-232, Centronics, SPC (DIGIMATIC)
AC 230 V
approx. 250 (W) x 670 (D) x 605 (H) mm, approx. 60 kg
Control panel (width x depth x height): approx. 165 (W) x 260 (D) x 105 (H) mm, approx. 0.75 kg
Display
Function
Language versions
Output
Power supply
Main unit dimensions
Weight
*Long versions for larger workpieces available on request.
Standard accessories
Designation
Technical specifications
Rockwell Super Rockwell
(scale N, T)
Steel ball Indenter
1/16”
Replacement steel ball 1/16” 10 balls
Flat table
Ø 64mm
V-Anvil
Ø 40mm 120° opening
Diamond Indenter
Additional information for
Brinell testing
Code No.
19BAA073
19BAA074
19BAA082
810-039
810-040
Designation
Plastic dust protection cover
Hardness test block
Hardness test block
Hardness test block
Hardness test block
Hardness test block
Adjusting level
Code No.
Technical pecifications
30 - 35HRC
60 - 65HRC
90 - 95HRB
64 - 69HR30N
70 - 79HR30T
19BAA517
19BAA123
19BAA125
19BAA126
19BAA128
19BAA129
19BAA098
Designation
Fuse
Accessories storage box
Instruction manual
Warranty card
The relation between test force and indenter for Brinell testing is indicated below.
The following Indenter (optional accessory) and a measuring microscope are needed to test Brinell hardness.
Brinell
19BAA277:
19BAA279:
19BAA280:
19BAA284:
Ø1 Indenter for Brinell hardness testing
Ø2.5 Indenter for Brinell hardness testing
Ø5 Indenter for Brinell hardness testing
Ø10 Indenter for Brinell hardness testing
HBW1/10
HBW2.5/6.25
HBW1/30
HBW2.5/15.625
HBW2.5/31.25
HBW5/25
HBW2.5/62.5
HBW5/62.5
HBW2.5/187.5
HBW5/125
HBW10/100
11
Special Accessories
Special accessories for Rockwell hardness testing
equipment
810-038
810-037
810-027
Round table (only for the HR series)
Outer diameter Ø 250 mm
For large specimen up to 85 kg
(machine must be firmly fixed to the
base)
Round table
Outer diameter Ø180 mm
For large specimen
Variable support arm
810-030
Point anvil, diamond
(Outer diameter Ø10mm)
For sheet specimen (Super Rockwell
tests only: DT series, ATK-600, R
series)
810-043
Point anvil
(Outer diameter Ø12mm)
For sheet specimen
810-040
810-044
V-Anvil (large)
(Outer diameter Ø 40 mm,
Opening 30 mm; 120°)
For cylindrical specimen
Point anvil
(Outer diameter Ø5.5 mm)
For sheet specimen
810-041
264-504-5D
V-Anvil (small)
(Outer diameter Ø40mm)
Opening 6 mm; 90°)
For cylindrical specimen
Digimatic Mini Processor
DP-1VR
810-042
V-Anvil (small)
(Outer diameter Ø10mm,
Opening 8 mm; 120°)
For cylindrical specimen
*The DP-1VR is supplied without
a connecting cable (must be
ordered separately).
(only for the HR series)
Length 250 mm
810-029
V-Anvil
Length 400 mm
Opening 50 mm; 120°
810-026
Fine adjusting table for
Jominy hardness testing
(Jominy test)
(Length 400mm
slot width 50mm)
For cylindrical samples
(only for the HR series)
Signal line (1m)
ARK-600, ATK-600 (937386)
HR series (937387)
300
810-048
Console
Unit: mm
700
400
554
For digital hardness testing
equipment only.
Special accessories: Hardness test blocks
with DKD/MPA certificate
Code No.
19BAA031D
19BAA034D
19BAA037D
19BAA038D
19BAA039D
19BAA040D
19BAA044D
19BAA046D
19BAA047D
19BAA048D
19BAA049D
19BAA054D
19BAA027D
19BAA166D
56AAE498D
56AAE501D
19BAA123D
19BAA124D
19BAA125D
19BAA126D
19BAA127D
19BAA128D
19BAA129D
Designation
Hardness test block 60HRB
Hardness test block 90HRB
Hardness test block 30HRC
Hardness test block 40HRC
Hardness test block 50HRC
Hardness test block 60HRC
Hardness test block 63.6 HR30N
Hardness test block 81, 2HR30N
Hardness test block 76.2HR15N
Hardness test block 84.7HR15N
Hardness test block 89.9HR15N
Hardness test block 77.3HR30T
Hardness test block 200HBW 2.5 / 187.5
Hardness test block 200HBW 10 / 1000
Hardness test block 350HBW 2.5/187.5
Hardness test block 100HBW 5/125 Alu
Hardness test block approx. 30HRC*
Hardness test block approx. 40HRC*
Hardness test block approx. 60HRC*
Hardness test block approx. 90HRB*
Hardness test block approx. 30HRB Alu*
Hardness test block approx. 64HR30N*
Hardness test block approx. 74HR30T*
* with factory certificate
Further hardness test blocks available on request.
Special accessories: Penetrating objects
Rockwell Indenters
Diamond cone indenter
Code No.
19BAA072D*
For type
all
Diamond cone indenter for small bores
19BAA292
1, 2, 3, 4
1/8“ steel ball indenter
1/16“ steel ball indenter
10 replacement 1/8“ steel balls
10 replacement 1/16“ steel balls
19BAA075
19BAA074
19BAA083
19BAA082
all
all
all
all
Brinell Indenters
1 mm carbide indenter
5 replacement 1 mm carbide balls
2.5 mm carbide indenter
5 replacement 2.5 mm carbide balls
5 mm carbide indenter
1 replacement 5 mm carbide ball
10 mm carbide indenter
1 replacement 10 mm carbide ball
Code No.
19BAA277
19BAA281
19BAA279
19BAA283
19BAA280
19BAA162
19BAA284
19BAA163
For type
2, 3, 4, 5
2, 3, 4, 5
1, 2, 3, 4, 5, 6
1, 2, 3, 4, 5, 6
2, 3, 4, 6
2, 3, 4, 6
2, 3, 4
2, 3, 4
- Replacement balls can be supplied with DKD/
MPA certificate on request.
* with DKD/MPA certificate
1 Wizhard HR-511
2 Wizhard HR-521
3 Wizhard HR-522
4 Wizhard HR-523
5 Durotwin DT-10 with Brinell retrofit package
6 Durotwin Plus DT-20
13
Vickers Hardness Testing Equipment
These models offer a wide selection - from low-cost manual to multi-purpose devices with automatic
revolver for switching from objective to indenter.
810-160D: AVK-C0
Low-cost manual
model
810-163D: HV-112
•Test force levels
from HV0.2 - HV20
•motorized
revolver
•Equipped with statistical calculation function etc.
810-165D: HV-114
•Test force levels
from HV1 - V50
•motorized revolver
•Equipped with statistical calculation function etc.
810-981D: HV-113
810-985D: HV-115
•Test force levels from HV0.2 - HV20
•Equipped with TV camera and screen
•motorized revolver
•Equipped with statistical
calculation function etc.
•Test force levels from HV1 - HV50
•Equipped with TV camera and screen
•motorized revolver
•Equipped with statistical
calculation function etc.
Vickers Hardness Testing Equipment
AVK-CO
Equipment features
The basic Vickers hardness testing machine - cost-efficient and simple!
Analog microscope to measure the diagonals,
the hardness value is read from the external Vickers table
Illumination
Camera connection
Analog measuring microscope
Ocular 10x (standard)
Manual Objective changer
10x Objective
Test force setting
Standard accessories
Hardness test block
700HV10
Diamond Indenter
19BAA060
(for Vickers)
19BAA098 Adjusting level
19BAA110 Plastic dust protection cover
Flat table
810-039
Outer Ø 64 mm
V-Anvil (large) Ø 40 mm,
810-040
opening 30 mm/120°
V-Anvil (small) Ø 40 mm,
810-041
opening 6 mm/90°
810-064 10 x Objective
Vickers table
19BAA016
Start button
Technical specifications
Code No.
810-160D
Model
AVK-C0
Test force
N
9,807
49,03
98,07
196,1
294,2
490,3
Loading process
Automatic (load, duration, disengagement)
Test force application time
5, 10, 15, 20, 30S switchable
Speed of
Reduced speed for final test force application
test force application
Objective
10 x
Magnification
100 x
Smallest digit increments
1 µm
Max. size of workpiece
Height 205 mm, Depth 165 mm (from the center of the indenter shaft)
Power supply
230V, 60VA max.
Dimensions (W x H x D)
200 x 705 x 600 mm
Weight
50 kg
15
Vickers Hardness Testing Equipment
Model HV-100
Equipment features
Camera connection
The motor-driven revolver enables switchovers between indenter
and objective via control panel.
For ergonomic and user-friendly operation, the control panel is
detached from the actual test machine.
The simple and intuitive operation of the touch screen allows the performance
of all important functions.
Use of 2 objectives for measurement.
Fast and easy statistical analysis of measuring results
Convenient display of imprints and other information
on the TV screen (HV-113/HV-115)
Digital measuring
microscope
Motor-driven
objective changer
Illumination
Test force setting
Control panel
LCD touch screen
810-163D: HV-112
810-165D: HV-114
Technical specifications
Code No.
Model
Test force
Observation and
N
measurement
Loading process
Application time
810-163D
810-981D
HV-112
HV-113
1,961 / 2,942 / 4,903 / 9,807 /
810-165D
810-985D
HV-114
HV-115
9,807 / 19,61 / 29,42 / 49,03 /
24,51 / 49,03 / 98,07 / 196,1
98,07 / 196,1 / 294,2 / 490,3
Ocular
Screen
Ocular
Automatic (load, duration, disengagement)
5 - 99 s
Speed of force application
20 / 50 / 100 / 150 µm/s
Max. size of workpiece
Optical path
Objective
Resolution
Max. measurement length
Conversion of hardness
Max. height 210 mm (if using a flat anvil), max. depth 170 mm
Beam split ocular/camera output 50/50
10 x , 20 x
0.1 µm
10 x : 700 µm, 20 x : 350 µm
Soft: HV, HK, tensile strength, HRA, HRB, HRF, HRG, HR15T, HR30T, HR45T
values
Objective changer
Output
Outer dimensions
Weight
Power supply
Screen
Hard: HV, HK, HS, HRB, tensile strength, HRA, HRC, HRD, HR15N, HR30N, HR45N
Motor-driven
RS-232C, Centronics, SPC (DIGIMATIC), external
Main unit: approx. 245 (W) x 515 (D) x 770 (H) mm Display: approx. 165 (W) x 260 (D) x 105
(H) mm
approx. 50 kg
230V 50/60Hz approx. 70VA max.
Digital measuring microscope
Camera
Motorized objective changer
Illumination
Test force setting
Screen
Control panel
LCD touch screen
810-981D: HV-113
810-985D: HV-115
Standard accessories
10x Objective
20x Objective
Diamond Indenter
Flat table Ø 64 mm
V-Anvil Ø 40 mm
810-040
Opening 30 mm; 120°
V-Anvil Ø 40 mm
810-041
Opening 30 mm; 90°
Halogen lamp (6V/20W)
19BAA219
installed
19BAA016 Hardness test block (700HV10)
19BAA110 Dust protection cover
810-615
810-618
19BAA060
810-039
Control panel functions (touch screen)
j Statistical functions
k Tolerance evaluation
l Measurement compensation when measuring
cylindrical or spherical surfaces
m Diagonals D1 and D2 readings
n Hardness value readings
o Test conditions, such as test force or application time
p Conversion to other hardness scales
q Automatic Objective changer control
17
Special Accessories
Special accessories for Vickers hardness testing
equipment
810-038
Round table
Outer diameter Ø 250 mm
For large specimen
810-016
Vise
(opening width 45mm)
264-504-5D
Digimatic Mini
Processor
DP-1VR
810-037
Round table
Outer diameter Ø180 mm
For large specimen
810-012
XY table 50 x 50 mm
Table dimensions 125 x 125 mm
810-017
Vise
(opening width
100mm)
Console
810-048
*Cable not included
Signal cable (1m)
HM series (937387)
300
19BAA219D
Halogen lamp 6V20W
Code No.
19BAA060D
700
Designation
Diamond Indenter
Vickers (incl. DKD/MPA
400
554
19BAA0063
certificate)
Diamond Indenter
19BAA0445
Knoop
Camera adapter
for CCD camera to
camera output
Hardness test blocks
with DKD/MPA certificate
Code No.
Designation
19BAA002D
Hardness test block 240HV 0.3
19BAA003D
Hardness test block 300HV 0.3
19BAA004D
Hardness test block 400HV 0.3
19BAA005D
Hardness test block 540HV 0.3
19BAA006D
Hardness test block 620HV 0.3
19BAA007D
Hardness test block 720HV 0.3
19BAA008D
Hardness test block 840HV 0.3
19BAA011D
Hardness test block 240HV10
19BAA012D
Hardness test block Macro 300HV10
19BAA014D
Hardness test block Macro 540HV10
19BAA015D
Hardness test block 620HV10
19BAA016D
Hardness test block 720HV10
Additional hardness test blocks available on request.
Objectives*
Objective 5 x AVK-C
810-063
Objective 5 x HV
810-616
Objective 10 x AVK-C
810-064
Objective 10 x HV
810-617
Objective 20 x AVK-C
810-065
Objective 20 x HV
810-618
Objective 40 x AVK-C
810-066
Objective 50 x HV
810-619
* Installation by Mitutoyo
Mikrovickers Hardness Testing Equipment
810-124D: HM-101
• Manual model,
hardness values
read from an
external table.
810-959D: HM-103
• Measurement on an
external screen and
display on a
simple control panel.
810-125D: HM-102
• Digital model
with simple control panel.
810-969D: HM-113
• Measurement on an
external screen and
display on a
multi-purpose control panel.
810-126D: HM-112
810-128D: HM-114
810-126D: HM-211
810-128D: HM-221
• Digital model with
multi-purpose control panel.
HV 0.01 - HV 1 resp.
HV 0.001 - HV 2
• With motorized revolver and option for connecting
up to 4 objectives.
• Measurements from
HV 0.01 - HV 1 resp.
HV 0.00005 - HV 2
19
Mikrovickers hardness testing equipment
Model HM-100
Equipment features
Hardness testing machine in acc. with ISO 6507-1 and JIS B7725
Mikrovickers hardness testing machine with Vickers testing from HV 0.001 - HV2
(depending on the type of machine)
Option to connect up to 3 Objectives, that can all be used for indentation measurement
(except HM-101)
Additional option to connect a Knoop Indenter
Manual Objective changer
Camera connection
Measuring microscope (digital)
Ocular 10x (standard)
Illumination unit
Objective change
Switching between and
selecting Indenter and Objective
Test force setting button
Objectives
10 x , 50 x , 100 x
(Standard: varies, depending
on the model. See column with
technical specifications.)
Digital
micrometer screws
Rear view
Vise
Standard vise (standard accessories)
Max. opening width 45 mm
RS-232C plug
Connecting port for
automatic table control
SPC connection
XY table
Table: 100 x 100 mm
Traversing range: 25 x 25 mm
Centronics
connection
Start button
Note: HM-101 has different technical specifications.
The photo shows model HM-112.
Photo: Rear view of models HM-112, 114
Handle for table elevation
Leveling screw
For horizontal adjustment
Control panel for optimal user comfort
Control panel with membrane keys (control unit)
Touch screen (touch-sensitive control panel)
HM-102
HM-103
Selector switch
Position value
Code No. of
measurement points
Diagonal value
Diagonal value
Correction
Hardness value
OK/Not OK
assessment
Hardness value
Print command
Duration of measuring force
Scroll keys
Type of hardness
OK/Not OK
assessment
Conversion value
Start switch
Zero position
Menu key
Start key
•The control panel with membrane keys is simple
and intuitive to operate and only offers the basic
functions needed for hardness testing, such as
diagonal and hardness value display, OK/NG
assessment setting, display of results and start
button for applying test force.
Measuring force
Light
setting
Duration of
measuring force
Selector switch
• The touch panel uses symbol keys and is therefore easy to
understand and operate while offering a wide range of
functions. Various additional functions are available alongside
the basic hardness testing functions, such as conversion of
measurement results into other hardness scales, setting mismatch
values, operating the lighting system and displaying the position
coordinates of the XY table.
Test force application
locking function
High level of positioning
accuracy
Large test force range
• A safety function prevents the
application of test force if the lens
changer is not in indenting position, thus preventing damage to the intenter if malfunctions occur.
• The repetition accuracy when switching between • The test force ranges between HV
indenter and objective is very high, enabling
0.001 and HV 2 (HM-114), enabling
you to identify and test the required position
hardness testing in the widest range
with a high level of accuracy. As such, targets
of applications - from relatively soft
in microranges can be measured easily and very
films to hard materials.
precisely.
*Imprint in a solid-state image
21
Technical specifications
810-124D
Code No.
Model
Test force
810-125D
HM-101
HM-102
98.07; 245.2; 490.3; 980.7
10; 25; 50; 100
1961; 2942; 4903; 9807
200; 300; 500; 1000
mN gf
mN
gf
Loading process
Speed of force
application
810-128D
HM-112
HM-114
9.807; 19.61; 29.42; 49.03; 98.07; 245.2; 490.3
1; 2; 3; 5; 10; 25; 50
980.7; 1961; 2942; 4903; 9807; 19610
100; 200; 300; 500; 1000; 2000
Automatic (load, duration, disengagement)
5 - 30 sec.
(any setting)
Application time
810-126D
5 - 60 sec.
5 - 99 sec.
approx. 60 µm/s
Max. size of workpiece
Optical path
Objectives
Smallest digit
increments
Max. measurement
length
XY table
Table top
Traversing range
Smallest calibration
Micrometer screw
Position input for
fine adjustment
table
1, 3, 10, 33 µm/s (245 mN or less), approx. 60 µm/s or more
Height: 95 mm Depth: 150 mm
Beam split ocular/camera output 50/50
10 x (observation)
50 x (measurement)
10 x , 50 x (measurement possible with both objectives)
10 x , 50 x , 100 x measurement possible with all objectives
0.2 µm
0.1 µm
0.01 µm (0.1 μm for 10 x and 50 x Objectivees)
140 µm
10 x : 700 µm, 50 x : 140 µm
10 µm
1 µm
—
Input via SPC interface to the hardness testing machine
For each objective
—
Control panel
functions
—
Data output
—
Touch screen operation
D1 and D2 diagonal readings; hardness value readings; XY table position reading;
test conditions, such as test force or application time; tolerance evaluation; measurement value compensation when
measuring
on cylindrical or spherical surfaces; translation to other hardness scales:
LEDdisplay
Soft: HV, HK, HBS, tensile strength, HRA, HRB, HRF, HRG, HR15T, HR30T, HR45T
Hard: HV, HK, HS, HBS, tensile strength, HRA, HRC, HRD, HR15N, HR30N, HR45N
Statistical functions:
Code No. of values, max., min., average, range, upper limit, lower limit, standard deviation,
Code No. of OK/Not OK evaluations, storage and editing of 256 values.
SPC output DIGIMATIC
RS-232C output
Centronics output
I/O for X-Y auto. measuring table
Main unit (width x depth x height): approx. 410 x 600 x 590 mm (without control panel)
approx. 42 kg
230 V
approx. 60VA or less (approx. 20VA or less for HM-101, approx. 105 VA or less with camera system)
Standard accessories
System configuration
Code No.
Model
810-124D
810-125D
810-959D
810-126D
810-969D
810-128D
HM-101
HM-102
HM-103
HM-112
HM-113
HM-114
10 x : 700 µm, 50 x : 140 µm, 100 x : 70 µm
with digital micrometer
100 x 100 mm
25 x 25 mm
Objective calibration
Dimensions
Weight
Power supply
Power consumption
140 µm
with analog micrometer
Main unit
See technical specifications for HM-102)
(See technical specifications for HM-112)
: Standard accessories
810-629
CCD camera
TV screen
—
810-617
810-619
810-620
19BAA058
19BAA059
810-074
810-011
19BAA133
: Special accessories 19BAA007
810-016
19BAA445
19BAA109
19BAA219
10x Objective for measurement (WD 5.6 mm)
50x Objective for measurement (WD 0.4 mm)
100x Objective for measurement (WD 0.3 mm)
Diamond Indenter (HM-101, 102, 103, 112, -113
Diamond Indenter (HM-114)
XY measuring table (digital) 100 x 100 mm,
measuring range 25 x 25 mm HM-112, 113, 114
XY measuring table (digital) 100 x 100 mm,
Spacer/Cleaner (material: bakelite)
Hardness test block 700HV0.3
Vise, opening: 51 mm
Camera adapter for CCD camera
Dust protection cover
Halogen lamp, 6V, 20W (installed)
Vickers hardness table for determining the hardness value (HM-101)
Mikrovickers Hardness Testing Equipment
Model HM-200
Equipment feature
Hardness testing machine in acc. with ISO 6507-2 and JIS B 7725
Multi-purpose
Built-in LCD color display with touch screen operation
Standard motorized/manual Objective changer
This machine works without weights, only by applying electromagnetic test force
Objective changer can be fitted with up to 4 objectives and up to 2 indenters (Knoop/Vickers)
Objectives with very good working distance
Standard camera connection
Test forces from 0.05 - 2000 gf
3. Automatic revolver button (manual operation possible!)
1. Measuring microscope (digital)
2. Illumination unit
• For automatic switching between
indenter and objectives
• Objectives: Can hold up to 4
Standard: 10X, 50X (HM-211)
10X, 50X, 100X (HM-221)
• Indenter mount:
up to 2
standard indenter:
Vickers Indenter (1)
7. Optical path (camera)
5. XY table (digital)
Table surface: 100 x 100 mm
Traversing range: 25 x 25 mm
Standard equipped with digital
micrometer screws!
6. Touch-sensitive control panel
Don‘t just track the test process, but also check
the hardness values in different scales or the test
conditions.
8. Path selector
4. Vise
Standard vise
Max. opening: 51 mm
9. Rear view
23
Objective with very good working distance
The use of these special objectives ensures a comfortable working distance between objective and test specimen,
thus dramatically reducing the risk of the components colliding during focusing.
With integrated, adjustable aperture diaphragm
Use this function to set the best possible contrast for capturing indentation diagonals.
Energy saving function
The integrated energy saving function automatically switches off the illumination and control panel
if the appliance is not operated for a specific period of time (between 1 and 60 minutes, can be set at minute increments).
Technical specifications
Code No.
Model
810-353D
HM-221
mN
98.07
980.7 0.4903 0.9807 1.961
2.942
4.903
9.807
19.61 29.42, 49.03
98.07
gf
10
100
0.05
0.1
0.2
0.3
0.5
1
2
3
5
10
Test force
mN
1961
196.1
294.2
490.3
980.7
1961
2942
4903
9807
19610
gf
200
20
30
50
100
200
300
500
1000
2000
At a test force of less than 0.9807 mN (0.1 gf) can only be set at 0.4903 mN (0.05 gf)
Test forces of up to 980.7 mN (100 gf)
Test forces from 0.9807 mN (0.1 gf) up to 9.807 mN (1 gf)
Variable test force can be set in increments of 9.807 mN (1 gf)
can be set in increments of 0.9807 mN (0.1 gf)
(1 setting
Test forces of 9.807 mN (1 gf) - 980.7 mN (100 gf)
can be stored)
Test forces of more than 980.7 mN (100 gf)
can be set in increments of 9.807 mN (1 gf)
can be set in increments of 98.07 mN (10 gf)
Test forces of more than 980.7 mN (100 gf) can be set in increments of 98.07 mN (10 gf).
Loading process
Electromagnetic generation of test force with automatic control (application of force, application time and disengagement)
Application time
can be set from 0 - 999 seconds
Max. size of
133 mm (height), 160 mm (depth - from the center of the penetrating object)
workpiece
Optics
Infinitely corrected, halogen light source, variable diaphragm opening, path change for optics: microscope/camera
10X for measuring, 50X for measuring
10X for measuring, 50X for measuring, 100X for measuring
Objective
(up to 4 objectives can be mounted)
(up to 4 objectives can be mounted)
Max. measuring
Objectives: 10X: 700 µm, 50X:140 µm
10X Objectives: 700µm, 50X: 140 µm, 100 X: 70µm
length
Mechanical,
can
also
be operated manually
Revolver rotation
With digital micrometer, size 100x100 mm/ traversing range: 25x25 mm/ digit increments: 1 µm
XY table
Display on touch-sensitive color LCD
Data display
Diagonal
length:
max.
5-digits,
min. 0.01µm (Objectivees with at least 50X magnification)
functions
Hardness values: max. 4-digit, min. 0.1
Force application, application time and disengagement, OK/Not OK evaluation (OK/±NG), translation, Indenter (HV/HK), XY table position
Compensation
Cylindrical and spherical shape, reading errors
functions
Hardness
translation
choice of SAE / ASTM / BSi860 / DIN / Mitutoyo
Assistant for test
conditions
Statistics
output
Data
output
Dimensions
(WxHxD)
Weight
Energy
consumption
810-352D
HM-211
196.1
294.2
490.3
20
30
50
2942
4903
9807
300
500
1000
Calculates test forces based on material thickness and expected Vickers hardness
Code No. of measured values, Max. measured value, Min. measured value, average, range, upper tolerance, lower tolerance,
Code No. of OK parts, Code No. of +Not OK and -Not OK
Standard deviation (n-1), standard deviation(n)
SPC DIGIMATIC, Centronics, RS232C
Outer dimensions: approx. 400 x 625 x 600 mm, mounted: at least 600 x 780 x 1000 mm
approx. 43 kg
230V AC, 50/60Hz, 90VA
Special Accessories
Standard accessories HM-200
Code No. Designation
19BAA407 Ocular measurement
810-617
Objective
19BAA439 Objective
19BAA440 Objective
19BAA058 Diamond Indenter
19BAA059 Diamond Indenter
11BAA578 Mounting shaft
02DEA204 Mounting shaft
810-074
XY measuring table (digital)
Description
Digital version, Ocular 10X
10X, for measuring, W.D.
5.6 mm, standard for HM211/221
50X, W.D. 1.1 mm,
standard for HM-211/221
100X, for measuring,
W.D. 2.5mm, standard for
HM-221
Vickers for HM-211
Vickers for HM-221
38 mm with two clamping
screws
76 mm with two clamping
screws
100 x 100 mm table,
Measuring range: 25 x 25
mm
Units
1
Code No.
Designation
Spacer/
19BAA133
Cleaner
1
810-016
938905
11BAA961
19BAA522
02DEA471
1
1
Vise
Optical filter
Protective cap
Camera adapter
Dust protection cover
Material: bakelite
1
12V 50W (installed)
19BAA207 Halogen lamp
1
Units
700HMV0.3,
Ø 25 mm x 6 mm
Opening: 51 mm
green
for ocular
­19BAA007 Hardness test block
1
Description
11BAB908 Fuse
250V AC, 2A
1
1
1
1
1
1
2
1
1
Special accessories for enhancing and optimizing the HM-200 test system
CCD
camera
Automaticmeasurement(810-355-1)
Videocamera810-354D
CCDcamera
Video
screen
Integratingthesecomponents
simplifiesevaluation
Framegrabber
Cameraadapter
Integratingthesecomponents
preventstesterrorscausedbythe
operator:automaticmeasurement
oftheindentationdiagonaland
calculationofthehardnessvalue
PC
Software
Automaticpositioning
(810-356D)
Combinationwithcomponentsforautomatic
measurement!
Increasesthroughputandsimplifiesmulti-point
testingthankstoautomatedpositioningofthetest
specimen
AutomaticXYtable
PC
PC-ATdrive
Automatic
positioning
Enginecontrolcircuit
board/DigitalI/O
Auto-focusunit(810-357)
PC-ATdrive
AFtable
Tubelens(samplefocus)
HM-211: 810-352D
HM-221: 810-353D
Code No.
810-352D
810-355-1
810-356D
810-357
Integratingtheauto-focuscomponents
togetherwithautomaticpositioningand
measurementproducesaquickandfully
automatedhardnesstestingsystem
PC
Joystick
Joystickcircuitboard
Designation
CCD video camera with external screen
CCD video camera for connection to a computer
Description
Simplified measurement of indentation diagonals on an external screen
Simplified measurement of indentation diagonals on a PC screen using
and evaluation software VL-Pak
VL-Pak software support. This software supports automatic measurement of
Automatic XY table
Auto-focus unit to enhance the XY table
the hardness indentation, for example.
Automatic movement to preset positions using VL-Pak software
Automatic focus on the workpiece surface for fully
automatic measurement
25
Special Accessories
Special accessories for Mikrovickers hardness testing
equipment
810-013
810-020
Thin sheet holder
Universal sample holder
Prevents measurement
distortions due to bending
when testing the hardness
of sheets with a thickness of
5 mm and less.
(sample thickness max. 30 mm)
For precise alignment of the test surface and
indenter axis if the test specimen is not exactly
parallel.
Cannot be used with automated hardness testing
machines.
(e.g.: scalpel blades etc.)
810-015
810-018
Wire holder
Rotating table (smallest increment 1°)
(vertical version)
Specimen can be rotated into different positions
for measuring on this test table.
For wire or balls with a Ø of between
0.4 mm and 3 mm for end measurements (e.g.: wire,
piano strings etc.)
810-014
810-017
Wire holder
Vise
(horizontal version)
For thin wires with a Ø of between 0.4 and 3
mm for side measurements. (e.g.: wire, piano
strings etc.)
For samples up to 100 mm.
810-019
810-012
Special slewing vise
XY table
For aligning the test surface, with an
opening width of 37 mm, a slewing
angle of ±150º and a rotating angle
of ± 25º.
(50 mm X/Y elevation)
810-085
Sample holder for
thin sheets etc.
Measuring window:
25 x 10 mm
Max. thickness of workpiece: 3 mm
For positioning the specimen by up
to 50 mm in X and Y direction.
Measuring
window
810-084
Rotating universal sample holder
(sample thickness max. 30 mm)
For precise alignment of the test surface and
Indenter axis if the test specimen is not exactly
parallel. Cannot be used with automated
hardness testing machines.
Special accessories for Mikrovickers hardness testing equipment
Indenter
Code No.
19BAA058D
19BAA059HD
19BAA061
19BAA062
Designation
Vickers Indenter
incl. DKD/MPA certificate
for HM-101, 102, 103, 112, 113, 211
Vickers Indenter
incl. DKD/MPA certificate
for HM-114, 221
Knoop Indenter
for HM-101, 102, 103 -112, -113, -211
Knoop Indenter
for HM-114, 221
Code No. 264-504-5D
Digimatic Mini Processor DP-1VR
For printing hardness values, statistics
*The signal line for the DP-1VR is not included and must be
ordered separately (see below)
Signal line (1m)
Code No. 937387 for Model HM (except HM-101)
Hardness test blocks incl. DKD/MPA certificate
Code No.
19BAA002D
19BAA003D
19BAA004D
19BAA005D
19BAA006D
19BAA007D
19BAA008D
19BAA011D
19BAA012D
19BAA014D
19BAA015D
19BAA016D
Designation
Hardness test block 240HV 0.3
Hardness test block 300HV 0.3
Hardness test block 400HV 0.3
Hardness test block 540HV 0.3
Hardness test block 620HV 0.3
Hardness test block 720HV 0.3
Hardness test block 840HV 0.3
Hardness test block 240HV10
Hardness test block 300HV10
Hardness test block 540HV10
Hardness test block 620HV10
Hardness test block 720HV10
Objectives for Vickers and Microvickers
Special accessories (installation by Mitutoyo) / possibly standard accessories (already installed)
Code No.
810-063
810-064
810-065
810-066
810-616
810-617
810-618
810-619
810-620
19BAA439
19BAA440
19BAA158-2
02DEA052
11AAB412
11AAB413
11AAB414
11AAB250
Designation
Magnification
Objective
Objective
Objective
Objective
Objective
Objective
Objective
Objective
Objective
Objective
Objective
Objective holder
Objective holder
Objective set, holder and Objective
Objective set, holder and Objective
Objective set, holder and Objective
13 corrector plates, 0.8 - 2 mm
5x
10x
20x
40x
5x
10x
20x
50x
100x
50x
100x
5x
20x
100x
Working
distance
13.5 mm
5.6 mm
1.8 mm
0.4 mm
0.3 mm
1.1 mm
2.5 mm
Remarks
AVK-C
AVK-C
AVK-C
AVK-C
HM-100/HM-200/HV-100
HM-100/HM-200/HV-100
HM-100/HM-200/HV-100
HM-100
HM-100
HM-200
HM-200
HM-100/HV-100
HM-200
HM-200
HM-200
HM-200
HM-100/HM-200/HV-100
27
VLPAK Measuring Program
for Automatic Indentation Measurement
Reduces operator influence on the hardness measurement.
Detection time just 0.3 seconds, i.e. dramatic increase in measuring performance and throughput.
Automatic detection in just 0.3 seconds.
(when using a PC with the recommended
performance specifications)
This very fast automatic measuring software detects the
indentation in 0.3 seconds, displays the hardness and
thus considerably shortens the required measuring time.
During hardness measurement, the indentation
diagonal is measured on the TV screen; critical
factors include the measurement deviations caused
by the operator and the worktime savings.
The VLPAK automatic length measuring program
automatically measures the indentation diagonal
and converts the result into a hardness value;
thus reducing measuring errors caused by
operator measuring deviations. It also determines
the hardness in a flash, in just 0.3 seconds,
thus dramatically increasing performance and
throughput during hardness testing.
You can easily combine it with your hardness
testing machine (*HM-112, 114 etc.) without
any problems and take advantage of its
additional functions.
The software is user friendly and allows you
to perform settings and data processing on a
Windows PC, where it demonstrates its superb
efficiency and ability to perform.
Equipped with automatic measuring
function for Vickers and Knoop hardness
testing
Fully automatic measurement of Vickers and
Knoop hardness is possible. The software also has
a template function that you can use to measure
indentations manually right on the PC screen.
Screen for automatic
measurement
Screen for manual measurement
Measurements are easily performed using
the mouse
Operators can perform all operations - from setting
to measurement - on a PC (Windows operating
system). MS-Excel can be used for various
measurement result processing tasks.
Brinell Hardness Testing Equipment
ABK-1
Suitable for testing workpieces
with up to 3000 kgf.
Hydraulic Brinell hardness testing machine ABK-1
ABK-1 is a hardness testing machine that is easy to operate and extremely
accurate. It is used for testing raw materials, cast/forged parts and special
steel.
A large indentation can create a smooth surface even when measuring rough
surfaces.
The handle for vertical table operates on a special bearing
to ensure even and soft upward and downward movements.
By distributing weights appropriately test forces between 4903N (500kgf) and
29420N (3000kgf) may be generated. Two different size carbide indenters (10 mm
and 5 mm) can be used, depending on the sample.
Technical specifications
Code No.
Model
Test force
Standard accessories
810-265-1
ABK-1
N 4903 7355 9807 14710 19614 24517 29420
kgf 500 750 1000 1500 2000 2500 3000
Test force
conversion
Test load
regulation
Test force
application time
Max. size of
workpiece
Manual (selection by replacement)
Outer
dimensions
approx. 430 (W) x 510 (D) x 1100 (H) mm
Weight
approx. 180 kg
Manual (load, duration, disengagement)
Manual (any setting)
Max. height
Max. depth
0 - 200 mm
155 mm
Designation
Technical specifications
Weight
Weight
Weight
For 4903N (500kgf)
For 2452N (250kgf)
For 9807N (1000kgf)
5mm (carbide ball)
10 mm (carbide ball)
20 x
Plastic
Indenter
Indenter
Measuring microscope
Dust protection cover
Hardness calculation
table
Accessories storage box
Operators‘ manual
Quantity
1
2 sets
2 sets
1
1
1
1
1
1
1
29
Mobile Rebound Hardness Testing Device
HARDMATIC HH-411
Equipment features
The HH-411 hardness tester uses the rebound method and is used to test metals;
it is particularly compact and easy and intuitive to operate. Hardness is measured in Leeb values.
810-298: HH-411
Wide range of detectors
Equipped with data storage function
In addition to the standard universal hydraulic impactor (type
D), users can choose from a wide range of special hydraulic
impactors for special measuring tasks.
Type DC: For cramped spaces, e.g. measuring in pipes
Type D+15: Narrow design for measuring in slots
Type DL: For measurements in the tightest ranges, such as
welded seams or gear wheels
Up to 1800 measuring results can be stored - the ideal device
for on-site control measurements.
With automatic alignment correction
When using rebound hardness testers, gravity influences
the measurement result - depending on the orientation
of the hydraulic impactor relative to the vertical when
pressing against the sample surface.
Free choice of hardness scale, depending on your
individual measurement application
The HL hardness value (L value: acc. to ASTM A 956) can be
converted into Vickers, Brinell, Rockwell C, Rockwell B and
Shore hardness values and tensile strength. The conversion
can be performed following the test resp. even during the test
in conversion mode.
Extremely simple to operate
The hydraulic impactor is simply pressed against the sample
surface and the button triggered (biro principle) - hardness
testing does not get any easier than this.
Technical specifications
Code No.
810-298
Model
HH-411
Carbide ball on the tip of the impactor
Hydraulic impactor
(Type D: ASTM A 956 specification)
Display
7 segments, LED display
Leeb hardness: 1 - 999HL
Digit increments 1HL
Vickers hardness: 43 - 950HV
Digit increments 1HV
Brinell hardness: 20 - 894HB
Digit increments 1HB
Rockwell hardness (C scale): 19.3 Display range
Digit increments 0.1HRC
(varies, depending on the conversion 68.2HRC
Rockwell hardness (B scale): 13.5 table used)
Digit increments 0.1HRB
101.7HRB
Shore hardness: 13.2 - 99.3HRS
Digit increments 0.1HS
Tensile strength: 499 - 1996 MPa
Digit increments 1MPa
Automatic angle correction, mismatch; OK/Not OK evaluation
Data storage: 1800 test values; Conversion (see “display range” for details)
Function
Statistical calculations (average, min./max., scatter range, standard deviation)
Auto-sleep; Display of Code No. of measurements
Sample requirements
Output
Power supply
Operating environment
Outer diameters and weight
Min. sample thickness 5 mm, min. weight 5 kg
(Samples weighing between 0.1 and 5 kg are securely fixed to a massive block weighing at least 5 kg for measuring purposes.)
Test position: min. 5 mm from the edge of the sample, min. space between test points 3 mm
Sample surface quality: within Ra 10 µm
RS-232C, SPC (DIGIMATIC)
Two LR 6 batteries, AC adapter (special accessory)
Temperature: 0 - 40°C Air humidity: 95% (without condensation)
Display: approx. 70 (W) x 110 (D) x 35 (H) mm, approx. 200g
Hydraulic impactor:
approx. Ø 28 x 175 mm,approx. 120g
Note: The rebound testing device cannot be used for measuring the hardness of elastic materials - such as rubber.
The rigidity of the sample affects the measuring result. Thin sheets, in particular, may not be tested using this device.
Standard accessories
Code No.
19BAA450-01
—
—
—
810-287
—
19BAA457
19BAA459
19BAA460
19BAA451
19BAA452
—
19BAA265
—
Designation
UD-410 display
LR 6 battery
Operators‘ manual
Belt
UD-41 hydraulic impactor1
Impactor
Carbide ball
Wrench
Hydraulic impactor cable
Stop cap
Stop cap (small)
Test machine storage and
transport container
Hardness comparison block
Hardness comparison block
storage and transport container
Technical specifications
Quantity
—
1
—
2
—
1
—
1
Type D approx. Ø 28 x 175mm, approx. 120 g (stop cap Ø 22 mm)
1
—
1
in the impactor
1
For replacing the carbide ball
1
—
1
Ø 22 mm
1
Ø 14 mm
1
Display and hydraulic impactor storage and transport container
1
corresponds to 800HLD
1
—
1
31
Special Accessories
Special Accessories
Code No.
One display (UD-410) can be used in combination with various detectors.
810-290: UD-414
Application: Suitable for
measuring slots and gaps as
found on gear wheels and
welded corners.
810-289: UD-413
Application: Suitable for
measuring in narrow slots.
Digimatic Mini Processor
264-504-5D
DP1-VR
937387
Signal line
09EAA069D Printing roll
19BAA238
Signal line
526688D
19BAA243
19BAA244
19BAA245
19BAA246
19BAA247
AC adapter
Hardness test block
Hardness test block
Hardness test block
Hardness test block
Hardness test block
19BAA248
19BAA249
810-288: UD-414
Application: Suitable for measuring the inside
walls of cylinders. The hydraulic impactor is
short and therefore guarantees the requisite
stability at the measuring position.
19BAA250
19BAA251
19BAA457
19BAA458
810-287
810-288
810-289
810-290
Technical specifications
For printing measurement data, various
statistics, etc.
For connecting DP-1VR and display (1 m)
For DP-1VR (1 roll)
For connecting PC and display RS-232C
(for DOS/V PC)
880HLD (Ø 115 mm, t33 mm, 3.7 kg)
830HLD (Ø 115 mm, t33 mm, 3.7 kg)
730HLD (Ø 115 mm, t33 mm, 3.7 kg)
620HLD (Ø 115 mm, t33 mm, 3.7 kg)
520HLD (Ø 115 mm, t33 mm, 3.7 kg)
For measuring convex cylindrical
Stop capcylinder (3)
surfaces (R10 to 20 mm): for types D
and DC
For measuring concave cylindrical
Stop caphollow cylinder (4) surfaces (R14 to 20 mm): for types D
and DC
Stop cap
For measuring convex spherical surfaces
ball (5)
(R10 to 27.5 mm): for types D and DC
For measuring concave spherical
Stop cap hollow ball (6)
surfaces (R13.5 to 20 mm): for types D
and DC
Carbide ball
For types D, DC and D+15
Impactor
For type DL
Type D approx. Ø 28 x 175 mm, approx.
UD-411 detector
120 g (stop cap Ø 22 mm)
Type DC approx. Ø 22 x 85 mm, approx.
UD-412 detector
50 g (stop cap Ø 22 mm)
Type D+15 approx. Ø 28 x 190 mm,
UD-413 detector
approx. 130 g (stop cap Ø 11 mm)
Type DL approx. Ø 28 x 230 mm,
UD-414 detector
approx. 140 g (stop cap Ø 4 mm)
Application Examples
810-289
810-290
810-288
Quantity
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Hardness Testing Equipment for Foam, Rubber and Plastic
Hardmatic Model HH-300
Compact design
HH-333, 334
HH-337, 338
HAR D
Hardmatic HH-300 models are slimline and easy to operate, and compactly designed for easy handling. Both types
are available with analog or digital display.
Plastic
Hard rubber
Long version
HH-331, 332
General types of rubber
HH-335, 336
SOF T
Elastomers
Hard foam
Soft foam
Overview
Code No.
Model
Process
811-332
HH-332
Shore A
811-334
HH-334
Shore D
811-336-01 811-338-01
HH-336
HH-338
Shore A
Shore D
811-331
HH-331
Shore A
811-333
HH-333
Shore D
811-335-01 811-337-01
HH-335
HH-337
Shore A
Shore D
33
Hardmatic Model HH-300
Long version
Equipment features
The head on the long version has a narrow cylindrical shape (Ø24 x 85mm). This enables it to
measure hardness both in slots or bore holes and on open surfaces. In addition, the operator can
perform measurements without bringing his hands close to the sample surface. This is helpful when
surface temperatures are high: for example immediately after the molding process.
To perform a measurement, simply press the hardness testing
device against the sample and read the displayed value.
Technical specifications
Code No.
Model
Type
811-331
HH-331
811-332
HH-332
Display
Analog
Digital
811-334
HH-334
Analog
Digital
Long version
Type of sample
Shore hardness
Rubber/soft plastic
Hard rubber, hard plastic
Type D
Type A
Prevailing standard
Needle shape
811-333
HH-333
JIS K 6253, JIS K 7215, ASTM D 2240, ISO 868, ISO 7619
Shaft diameter
Shape of needle tip
Tip angle
Tip diameter
Tip curvature
Pressure surface
Protrusion of test needle over
pressure surface
Scale divisions
Test force application
Functions
Outer dimensions
Weight
Power supply
Standard accessories
Ø 1.25 ± 0.15 mm
Truncated cone
35° ± 0,25°
Ø 0.79 ± 0.01mm
—
Cone
35° ± 1°
—
Ø 0 ± 0.01mm
Ø18mm
2.5mm
1 hardness unit (HH-329, 331, 333, 335, 337) 0.5 hardness unit (HH-330, 332, 334, 336, 338)
Coil spring
“Hold” function, DIGIMATIC
“Hold” function, DIGIMATIC
Analog pointer
Analog pointer
data output
data output
Analog approx. 56 (W) x 33.5 (D) x 186 (H) mm Digital approx. 60 (W) x 28.5 (D) x 193 (H) mm
320 g
310 g
320 g
310 g
—
Silver oxide cell battery SR 44
—
Silver oxide cell battery SR 44
•Hardness testing device, main unit • Instruction manual • Silver oxide cell battery SR44 (HH-332, 334)
• Storage and transport container • Warranty card
Compact version
Hardmatic Model HH-300
Equipment features
The compact design fits easily into your hand, thus permitting very comfortable measurements.
Technical specifications
Code No.
Model
Type
Display
Type of sample
Shore hardness
Applicable standards
Needle shape Shaft diameter
Shape of needle tip
Tip angle
Tip diameter
Tip curvature
Pressure surface Ø
Protrusion of test needle
over pressure surface
Scale divisions
Test force application
Functions
Outer dimensions
Weight
Power supply
Standard accessories
811-335-1
HH-335
Analog
811-336-1
HH-336
Digital
811-337-1
HH-337
Compact version
Analog
811-338-1
HH-338
Digital
Hard rubber/hard plastic
Type A
Type D
JIS K 6253, JIS K 7215, ASTM D 2240, ISO 868, ISO 7619
Ø 1.25 ± 0.15 mm
Truncated cone
Cone
35° ± 0,25°
30° ± 0,25°
Ø 0.79 ± 0.01mm
—
—
0.1 ± 0.01 mm
Ø 18 mm
Rubber/soft plastic
2.5 mm
1 hardness unit (HH-331, 333, 335, 337) 0.5 hardness unit (HH-332, 334, 336, 338)
Coil spring
Coil spring
“Hold” function
“Hold” function
Analog pointer
Analog pointer
DIGIMATIC data output
DIGIMATIC data output
approx. 56 (B) x 33.5 (T) x 144 (H) mm
approx. 60 (W) x 28.5 (D) x 151 (H) mm
300 g
290 g
300 g
290 g
—
Silver oxide cell battery SR 44
—
Silver oxide cell battery SR 44
•Hardness testing device, main unit • Instruction manual • Silver oxide cell battery SR44 (HH-336, 338) • Storage and transport container • Warranty card
35
Digital devices - Hold function
Analog devices - Analogue pointer
prior to measurement
Analogue pointer
Pointer
during measurement
After pressing the hold button
Holds the display value at all times during measuring so that you
always have the measurement results available at a glance.
The slave pointer in the analog display is ideal for measuring
peak values.
Special accessories
Digimatic Mini Processor DP-1VR (special
model) HH-332, 334, 336, 338
The HH-300 series can also print out hardness measurement
results and statistics - such as min./max. values, standard
deviations and averages - via the Digimatic interface.
A special DP-1VR model and the process-oriented RS-232C
interface can transfer measuring results to your PC.
19BAA406
DP-1VR (special model)
Mounting shaft
HH-329, 335, 336, 337, 338
The optional mounting shaft can be
used to tension a test machine in a
conventional box column drill and thus
keep the measuring position stable. If you
additionally fit the shaft with electronic
scales, the measuring results will be as
stable as if you had used the measurement
stand from the CTS series.
19BAA180
Test sample set
Code No. 64AAA964
Made of rubber
Hardness 30, 60, 90 Shore “A”
One unit - 3 applications
Measurement / Test stand for various applications
For measuring hardness
For testing the spring force of the main unit.
More stable results with fewer deviations can be achieved when measuring
hardness by attaching the supplied weight directly to the hardness testing
device than when applying force manually.
All 4 models can be used for the listed applications by purchasing the
corresponding optional accessory
Technical specifications
Code No.
Suitable models
Application
Hardness measurement
Test force
Weight
Application
Manual measurement at firm pressure
Test force
Weight
Application
Testing spring force
Weight
Weights
Weight attachment
811-019
HH-331, 332
811-012
HH-333, 334
811-013
HH-335, 336
811-014
HH-337, 338
9.81 N
j
49.05 N
j+l+m
9.81 N
j
49.05 N
j+l+m
9.81 N
j+o
49.05 N
j+l+o
9.81 N
j+o
49.05 N
j+l+o
L: — / H: j
L: j+n / H: l
L: — / H: j+k
L: j+n / H: l
jCTS-101, 102, 103, 104 Measuring / Testing k103 MeasuringlCTS-102, 104 Measuring / Testing
m102, 104 MeasuringnCTS-102, 104 Measuring / Testing o101, 102, 103, 104 Measuring
jØ64x23,5 lØ78x110 m
jØ64x23,5 lØ78x110
jØ64x23,5 kØ20x19
Ø20x25 nØ40x25
jØ 64x23,5 oØ40x13
mØ20x25nØ40x25oØ40x13
oØ40x13
oØ40x13
j580 g k34.8 g l3950 g m50 g n187,4 g o130 g
Outer diameter
(unit: mm)
Weight, main unit
Stand
Outer dimensions
Vertical elevation
Max. sample thickness
Sample table dimensions
Weight, total
approx. 9 kg
Ø 148 x height (max.) 420 mm
12 mm
approx. 90 mm
Ø 90 mm
approx. 13 kg
approx. 9 kg
approx. 13 kg
Standard accessories for measurement and test stands
Weight n
Technical
Quantity 811-019 811-012 811-013
specifications
—
1
—
1
Measuring /
1
Testing
Testing
1
—
—
Measuring /
1
—
—
Testing
Measuring /
1
—
—
Testing
Testing
1
—
Weight o
Testing
Designation
Main unit
Tool kit
Weight j
Weight k
Weight l
Weight m
2
Operators‘ manual —
1
Warranty card —
1
811-014
—
1) Hardness
measurement
2) Testing spring
force
3) Manual
measurement
37
Conversion table for hardness values
This table is for reference purposes to allow the approximate translation of hardness values determined on one and the same metal sample using different hardness
testing methods into other hardness values. In view of the strongly differing test methods, the values determined using the method indicated in the product
specification should be used - and not values translated from other test methods - for quality assurance purposes.
Conversion of hardness values for non-alloyed and low-alloy steel and cast steel acc. to DIN EN ISO 18265 table A.1
76,0
80,7
85,5
90,2
95,0
99,8
HRB
—
41,0
48,0
52,0
56,2
—
HRF
—
—
82,6
—
87,0
—
HRC
—
—
—
—
—
—
Rockwell hardness
HRA
HRD
—
—
—
—
—
—
—
—
—
—
—
—
HR15N
—
—
—
—
—
—
HR30N
—
—
—
—
—
—
HR45N
—
—
—
—
—
—
105
109
114
119
124
128
133
138
143
147
152
156
162
166
171
176
181
185
190
195
199
204
209
214
219
223
228
233
238
242
247
252
257
261
266
271
276
280
285
295
304
314
323
333
62,3
—
66,7
—
71,2
—
75,0
—
78,7
—
81,7
—
85,0
—
87,1
—
89,5
—
91,5
92,5
93,5
94,0
95,0
96,0
96,7
—
98,1
—
99,5
—
(101)
—
(102)
—
(104)
—
(105)
—
—
—
—
—
—
—
90,5
—
93,6
—
96,4
—
99,0
—
(101,4)
—
(103,6)
—
(105,5)
—
(107,2)
—
(108,7)
—
(110,1)
—
(111,3)
—
(112,4)
—
(113,4)
—
(114,3)
—
(115,1)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
20,3
21,3
22,2
23,1
24,0
24,8
25,6
26,4
27,1
27,8
28,5
29,2
29,8
31,0
32,2
33,3
34,4
35,5
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
60,7
61,2
61,6
62,0
62,4
62,7
63,1
63,5
63,8
64,2
64,5
64,8
65,2
65,8
66,4
67,0
67,6
68,1
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
(69,6)
70,1
70,6
71,1
71,6
72,1
72,6
73,0
73,4
73,8
74,2
74,6
74,9
75,6
76,2
76,8
77,4
78,0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
(41,7)
42,5
43,4
44,2
45,0
45,7
46,4
47,2
47,8
48,4
49,0
49,7
50,2
51,3
52,3
53,6
54,4
55,4
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
(19,9)
21,1
22,2
23,2
24,3
25,2
26,2
27,1
27,9
28,7
29,5
30,4
31,1
32,5
33,9
35,2
36,5
37,8
Tensile strength
Vickers
Brinell hardness
MPa
255
270
285
305
320
335
hardness HV10
HB*
80
85
90
95
100
105
350
370
385
400
415
430
450
465
480
495
510
530
545
560
575
595
610
625
640
660
675
690
705
720
740
755
770
785
800
820
835
850
865
880
900
915
930
950
965
995
1030
1060
1095
1125
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200
205
210
215
220
225
230
235
240
245
250
255
260
265
270
275
280
285
290
295
300
310
320
330
340
350
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
40,3
41,1
41,7
42,2
43,1
43,7
44,3
44,9
45,3
46,0
46,5
47,1
47,5
48,4
49,4
50,2
51,1
51,9
Translation ISO 18265 - 50.5 HRC - A.1 - HV
Standard Code No.
hardness value from translation (table value)
table used for translation
method used to experimentally determine hardness
Example of a translation:
In the case of a result produced by means of translation, this notation
must indicate which method was used to directly determine hardness.
Table left (continued)
Tensile strength
Vickers
Brinell hardness
MPa
1155
1190
1220
1255
1290
1320
1350
1385
1420
1455
1485
1520
1555
1595
1630
1665
1700
1740
1775
1810
1845
1880
1920
1955
1995
2030
2070
2105
2145
2180
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
hardness HV10
HB*
360
370
380
390
400
410
420
430
440
450
460
470
480
490
500
510
520
530
540
550
560
570
580
590
600
610
620
630
640
650
660
670
680
690
700
720
740
760
780
800
820
840
860
880
900
920
940
342
352
361
371
380
390
399
409
418
428
437
447
456
466
475
485
494
504
513
523
532
542
551
561
570
580
589
599
608
618
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
HRB
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
HRF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
HRC
36,6
37,7
38,8
39,8
40,8
41,8
42,7
43,6
44,5
45,3
46,1
46,9
47,7
48,4
49,1
49,8
50,5
51,1
51,7
52,3
53,0
53,6
54,1
54,7
55,2
55,7
56,3
56,8
57,3
57,8
58,3
58,8
59,2
59,7
60,1
61,0
61,8
62,5
63,3
64,0
64,7
65,3
65,9
66,4
67,0
67,5
68,0
Rockwell hardness
HRA
HRD
68,7
52,8
69,2
53,6
69,8
54,4
70,3
55,3
70,8
56,0
71,4
56,8
71,8
57,5
72,3
58,2
72,8
58,8
73,3
59,4
73,6
60,1
74,1
60,7
74,5
61,3
74,9
61,6
75,3
62,2
75,7
62,9
76,1
63,5
76,4
63,9
76,7
64,4
77,0
64,8
77,4
65,4
77,8
65,8
78,0
66,2
78,4
66,7
78,6
67,0
78,9
67,5
79,2
67,9
79,5
68,3
79,8
68,7
80,0
69,0
80,3
69,4
80,6
69,8
80,8
70,1
81,1
70,5
81,3
70,8
81,8
71,5
82,2
72,1
82,6
72,6
83,0
73,3
83,4
73,8
83,8
74,3
84,1
74,8
84,4
75,3
84,7
75,7
85,0
76,1
85,3
76,5
85,6
76,9
HR15N
78,6
79,2
79,8
80,3
80,8
81,4
81,8
82,3
82,8
83,2
83,6
83,9
84,3
84,7
85,0
85,4
85,7
86,0
86,3
86,6
86,9
87,2
87,5
87,8
88,0
88,2
88,5
88,8
89,0
89,2
89,5
89,7
89,8
90,1
90,3
90,7
91,0
91,2
91,5
91,8
92,1
92,3
92,5
92,7
92,9
93,0
93,2
HR30N
56,4
57,4
58,4
59,3
60,2
61,1
61,9
62,7
63,5
64,3
64,9
65,7
66,4
67,1
67,7
68,3
69,0
69,5
70,0
70,5
71,2
71,7
72,1
72,7
73,2
73,7
74,2
74,6
75,1
75,5
75,9
76,4
76,8
77,2
77,6
78,4
79,1
79,7
80,4
81,1
81,7
82,2
82,7
83,1
83,6
84,0
84,4
HR45N
39,1
40,4
41,7
42,9
44,1
45,3
46,4
47,4
48,4
49,4
50,4
51,3
52,2
53,1
53,9
54,7
55,6
56,2
57,0
57,8
58,6
59,3
59,9
60,5
61,2
61,7
62,4
63,0
63,5
64,1
64,7
65,3
65,7
66,2
66,7
67,7
68,6
69,4
70,2
71,0
71,8
72,2
73,1
73,6
74,2
74,8
75,4
* The Brinell hardness values to 450 HB were determined using the steel ball as Indenter, and above this level using the carbide ball.
NOTE: The figures in brackets indicate hardness values that are outside the definition range of the standardized hardness testing method, but which are practically used as approximate values in
many cases.
39
Additional information
Minimum
thicknessof
thesample
t:mm
0.001
0.002
0.003
0.005
Vickershardnessvalue
Hv
d
h
2000
t
F
HV=0.1891 2
d
t>1.5d
h=d
7
t:Minimumthicknessofthesamplemm
d:Diagonallengthmm
h:Penetrationdepthmm
Diagonal
lengths
d:mm
0.01
1000
0.02
0.03
0.05
500
300
200
0.1
100
0.2
0.3
0.5
50
30
20
[Example]
Testforce
F:N
4.903X10-3
Hardness
symbol
HV0.0005
9.807X10-3
0.001
0.002
0.003
0.005
0.001
0.002
0.003
0.005
0.01
0.02
0.03
0.05
0.1
0.01
19.61X10-3
29.42X10-3
49.03X10-3
98.07X10-3
0.02
0.03
0.05
0.1961
0.2942
0.4903
0.1
0.9807
1.961
2.942
4.903
0.2
0.3
0.5
0.2
0.3
0.5
Bildverarbeitungsmessgeräte
9.807
19.61
29.42
49.03
98.07
196.1
294.2
490.3
1
2
3
5
1
1
2
2
3
t:Minimumthicknessofthesample:0.15mm
HV:Hardnessvalueofthesample:185HV1
d:Diagonallength:0.11mm
f:Testforce:9.807N
Koordinatenmessgeräte
10
20
30
50
Formmessgeräte
Optische Messgeräte
Sensorsysteme
Härteprüfgeräte
und Seismografen
t
(mm)
10 20
30
40 50 60 70
HRD
HRC
80 90 100
t
(mm)
3.3
3.15
3
2.85
2.7
2.55
2.4
2.25
2.1
1.95
1.8
1.65
1.5
1.35
1.2
1.05
0.9
0.75
Minimum thickness of the sample
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
Linear Scale
Minimum thickness of the sample
Minimum thickness of the sample
Rockwell
Super Rockwell (scale N, T) hardness
t
(mm)
1.2
1.0
HRT
0.8
0.6
HRN
0.4
0.2
0
10 20
30
40 50
60 70
80 90 100
15N
30N
20 30
40 50
60 70
HRA
Rockwell hardness
Handmessgeräte und
Datenübertragungssysteme
1.4
HRK
HRG
HRB
80
90 100
HRH
HRE
HRF
15T
45N
30T
45T
Super Rockwell hardness
(scales N, T)
Rockwell hardness
Note: All information about our products in this printed material, particularly the illustrations, drawings, measurement and
performance specifications, as well as other technical specifications are to be interpreted as approximate average values. In this respect, changes in construction, technical specification, measures and weights remain reserved. Our specified
standards, similar technical regulations as well as the technical specifications, descriptions and illustrations of products are
accurate on the date of printing. Furthermore, our general terms of business in the currently applicable revision are binding.
Only the offers we make are definitive.
Mitutoyo Messgeräte GmbH
Borsigstr. 8-10
41469 Neuss
T +49 (0)2137-102-0
F +49 (0)2137- 86 85
info@mitutoyo.de
www.mitutoyo.de
© MITUTOYO / D 1207 PRE 1306
Vickers
Download PDF
Similar pages