Caddy® Arc 151i_201i_XA00133920 - Alas-Kuul

Caddy® Arc 151i/201i
Portable solutions for professional welding
The Caddy® name has always been synonymous with
robust and durable welding tools designed for the
professional welder. Introducing the fifth generation of
portable welding equipment from ESAB the latest
Caddy® machines have over 30 years experience in
inverter technology built in.
Designed for durability
The machines are equipped with the large OKC 50 cable
connectors for higher durability. The compact design, with its
impact resistant polymer casing, is light and easy to carry, yet the
size does not compromise the important cooling of the internal
components. Large heat sinks and clever design make for a
cooler running machine with a longer life expectancy when used
in harsh working environments. The design also helps to keep all
sensitive parts inside the machine clean and dust free. Caddy® is
built in accordance with IP23, which means it can be used
outdoors – even in the rain. The control panels are easy to
understand and use. The durable design and the superior welding
performance give you a machine that you can rely on day after
day.
Power factor correction - PFC
The Caddy® Arc 151i/201i are 230 V single-phase power sources
equipped with a PFC circuit making it possible to use the full
range of the machine on a 16 A fuse. The PFC also protects the
machines against fluctuating mains voltage and makes it safer to
use with a generator. Caddy® Arc 151i/201i can operate with
extra long mains cables, over 100 m, giving you a very larger
working radius.
Control panels
The basic control panel Caddy® A31 has only one knob for
current setting making it extremely easy to set. The more
advanced Caddy® A33 panel gives you a digital display, hot-start
and arc force control to fine tune the welding, a choice of MMA or
TIG welding, LiveTig™ start in TIG mode, two memories and
remote control facility. Both panels are easy to understand and
set, even when wearing welding gloves.
MMA and ArcPlus™ II
Caddy® Arc supplies direct current and you can weld most
metals including alloyed and non alloyed steel, stainless steel
and cast iron. With Caddy® Arc 151i you can weld most
electrodes from Ø1.6 -3.2 mm and some 4 mm electrodes.
Caddy® Arc 201i welds electrodes up to Ø 4 mm. The Caddy®
A33 control panel has the latest regulator, ArcPlus™ II, that
provides a more intense, yet smooth and stable arc that is easy
to control. Arc Plus™ II generates smaller droplets, the arc burns
smoothly and there is no need to pause at the edges when
weaving. ArcPlus™ II offers even better welding characteristics,
simplifies your work and gives you better weld quality with less
need for post weld treatment.
TIG welding
With Caddy® Arc you can easily TIG-weld. All you need is a TIGtorch with a gas valve, a gas regulator and a cylinder of gas.
With panel Caddy® A31 you use scratch-start. Panel Caddy®
A33 gives you LiveTig™ start that electronically controls the start
current. You can weld mild steel or stainless steel with or without
filler material.
• Adjustable hot start (A33) - easy to strike the electrode. Helps
you to avoid starting problems.
• Adjustable arc force (A33) - sets the intensity of the arc for
improved weld quality.
Applications
• Professional welding tool
• In and outdoor installation on site
• In and outdoor repair and maintenance on site
• In and outdoor fabrication
XA00133920
• ArcPlus™ II (A33) - better welding characteristics, simplifies your
work and gives you better weld quality with less after treatment.
• Extra long mains cable capability – gives extra large working
radius
Technical data
Caddy® Arc 151i
Caddy® Arc 201i
Mains voltage V/ph Hz
230/1 50/60
230/1 50/60
Fuse (slow), A
16
16
Recommended generator size, kVA
10
12
Permitted load at 40ºC, MMA
20% duty cycle, A/V
150/26
170/26,8
60% duty cycle, A/V
100/24
130/25,2
100% duty cycle, A/V
90/23,6
110/24,4
Permitted load at 40ºC, TIG
25% duty cycle, A/V
150/16
220/18,8
60% duty cycle, A/V
120/14,8
150/16,0
100% duty cycle, A/V
110/14,4
140/15,6
Setting range MMA (A31), A
8 - 150
Setting range MMA (A33), A
4 - 170
Setting range TIG (A33), A
3 - 220
Open circuit voltage, U0 max, V
A31 without VRD function 1)
58-72
A33 VRD function deactivated 2)
55-60
55-60
A33 VRD function activated 2)
<35
<35
Power factor at max. current
0,99
0,99
Efficiency at max. current
80
81
Dimensions lxwxh, mm
418 x 188 x 208
418 x 188 x 208
Weight, kg
7,9
8,3
Enclosure class
IP 23
IP 23
Application classification
S
S
Standards
IEC/EN 60974-1, IEC/EN 60974-10
1) Valid for power sources without VRD specifications on the rating plate.
2) Valid for power sources with VRD specifications on the rating plate. The VRD function is explained in the
instructions manual for the control panel if the panel has that function.
Ordering information
Caddy® Arc 151i, A31 package incl. 3 m MMA
welding and return cable kit (”screw” type holder)
Caddy® Arc 151i, A33 package incl. 3 m MMA
welding and return cable kit (”screw” type holder)
Caddy® Arc 201i, A33 package incl. 3 m MMA
welding and return cable kit (”screw” type holder)
0460 445 881
0460 445 883
0460 445 884
Delivery content: 3 m of mains cable with plug
Quality accessories for the quality welder
ESAB offers a wide range of accessories. For information on the
complete product range, go to our web-site: www.esab.com or
contact your local ESAB dealer.
Unrivalled service and support
Our commitment and ability to deliver the expected service
and support starts immediately after the order is confirmed.
We endeavour to offer our customers an after sales
service, which is second to non. A strong and skilful
service organisation is prepared to offer service and
maintenance, calibration, validation and upgrading of
equipment and software.
The service organisation will offer standardised solutions
for the reconditioning or modification of existing products.
ESAB AB
Box 8004
SE-402 77 GÖTEBORG SWEDEN
Phone: +46 31 50 90 00 Fax +46 31 22 04 49
E-mail: info@esab.se
www.esab.com
2012-07-26 / ESAB reserves the right to alter specifications without prior notice
ACCESSORIES
Shoulder strap
0460 265 003
Trolley (for 5 to 10 l gas cylinder)
0459 366 885
Trolley (for 20 to 50 l gas cylinder)
0459 366 887
Trolley (for 20 to 50 l gas cylinder)
0460 330 880
Remote control MMA 1, incl. 10 m cable
0349 501 024
Remote control AT1
0459 491 896
Remote control AT1 CoarseFine
0459 491 897
Connection cables for AT1 and AT1 CoarseFine:
5 m cable
0459 552 880
10 m cable
0459 552 881
15 m cable
0459 552 882
25 m cable
0459 552 883
Foot pedal FS 002, incl. 5 m cable
0349 090 886
TIG torch TXH™ 150V OKC50, 4m
0460 011 843
TIG torch TXH™ 150V OKC50, 8m
0460 011 883
TIG torch TXH™ 200V OKC50, 4m
0460 012 841
TIG torch TXH™ 200V OKC50, 8m
0460 012 881
Welding helmet Albatross 1000, 90x110
0349 502 204
Welding helmet Eye-Tech Mono 10/11, weight 480 g 0700 000 888
Electrode holder Confort 200
0700 006 004
Electrode holder Handy 200,
0700 006 003
Electrode holder Prima 200,
0700 006 006
Work clamp MP 200
0367 558 880
Chipping hammer SH2
0000 663 000
Chipping hammer SH3
0683 200 001
Welding gloves Heavy Duty Basic
0700 005 007
Welding gloves Heavy Duty Regular
0700 005 008
Welding gloves Heavy Duty Excel, L
0700 005 009
Download PDF
Similar pages