ENG
ENGLISH
OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the your set and
retain it for future reference.
MONITOR SIGNAGE MODELS
72WS70MS
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
CONTENTS
4
5
LICENSES
ASSEMBLING AND
PREPARING
23
- Viewing movies
27
- Viewing photos
30
- Listening to music
32
- Viewing the Contents List
33
- DivX® VOD Guide
34
- Using PIP/PBP
5
Accessories
6
Parts and buttons
7
Portrait Layout
36 CUSTOMIZING SETTINGS
8
Mounting on a wall
36
Accessing main menus
37
- PICTURE settings
40
- AUDIO settings
41
- TIME settings
42
- OPTION settings
47
- NETWORK settings
9
REMOTE CONTROL
11
USING THE MONITOR
11
Connecting to a PC
12
- RGB connection
12
- DVI-D connection
13
- HDMI connection
13
- Display Port connection
14
Adjusting the screen
14
- Selecting an image mode
14
- Customizing image options
15
- Customizing PC display options
15
Adjusting the sound
15
- Selecting an sound mode
16
- Customizing sound options
16
Using additional options
16
- Adjusting aspect ratio
18
- Using the input list
19 ENTERTAINMENT
19
- Connecting to a wired network
20
- Network Status
21
- Connecting USB storage devices
22
- Browsing files
48 MAKING CONNECTIONS
49
Connecting to a HD receiver, DVD,
Camcorder, Camera, Gaming Device or
VCR player
49
- HDMI connection
49
- Component connection
50
- AV(CVBS) connection
50
Connecting to a USB
51
Connecting to the LAN
51
- LAN connection
52
Daisy Chain Monitors
53 TROUBLESHOOTING
56 SPECIFICATIONS
TABLE OF CONTENTS
61 CONTROLLING THE MULTIPLE
PRODUCT
61
Connecting the cable
61
RS-232C Configurations
61
Communication Parameter
62
Command reference list
64
Transmission / Receiving protocol
ENG
ENGLISH
60 IR CODES
3
4
LICENSES
ENGLISH
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified device must be registered in order to play purchased DivX Videoon-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX Certified to play DivX video up to HD 1080p, including premium
content.
DivX , DivX Certified and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
ASSEMBLING AND PREPARING
5
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
POWER
ENERGY
MONITOR
INPUT
OFF
ON
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
PSM
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
S.MENU
OK
BACK
TILE
EXIT
ID
ON
OFF
Remote control and Batteries
Power Cord
CD (Owner's Manual)
/ Card
D-sub 15 pin signal cable
CAUTION
Do not use any pirated items to ensure the safety and product life span.
yy
Any damages or injuries by using pirated items are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
ENG
ENGLISH
ASSEMBLING AND PREPARING
6
ASSEMBLING AND PREPARING
Parts and buttons
ENGLISH
ENG
IR Receiver /
Power Indicator
 Lighting On: Turned on
 Lighting Off: Turned off
Screen Marks
Screen Buttons
Connection panel
Screen Marks
Description
INPUT
Changes the input source.
MENU
Accesses the main menus, or saves your input and exits the menus.
Adjust the up and down.
Adjusts the volume level.
AUTO/SET
Displays the current signal and mode.
Press this button to adjust the screen automatically (available only in RGB mode)
Turns the power on or off.
/I
IR Receiver
This is where the unit receives signals from the remote control.
Power Indicator
This Indicator lights up red when the display operates normally(on mode). If the display
In sleep mode (In Power Saving mode), this indicator color changes to amber.
NOTE
You can set the Power indicator to on or off by selecting OPTION in the main menu.
yy
ASSEMBLING AND PREPARING
7
Portrait Layout
When installing in a Portrait Layout, rotate the
monitor clockwise 90 degrees (when facing the
screen).
ENG
ENGLISH
- Only on some models.
8
ASSEMBLING AND PREPARING
Mounting on a wall
CAUTION
ENGLISH
ENG
For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
10 cm
10 cm
10 cm
10 cm
Disconnect the power before installing or
yy
moving the monitor. Otherwise electric shock
may occur.
If you install the Monitor on a ceiling or
yy
slanted wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
yy
cause damage to the Monitor and void your
warranty.
Use screws and wall mounts that meet the
yy
VESA standard. Any damages or injuries by
misuse or using an improper accessory are
not covered by the warranty.
10 cm
If you intend to mount the Monitor to a wall, attach
Wall mounting interface (optional parts) to the back
of the set.
When you install the Monitor using the wall
mounting interface (optional parts), attach it
carefully so it will not fall.
1 Please, Use the screw and wall mount interface
in accordance with VESA Standards.
2 If you use screw longer than standard, the
monitor might be damaged internally.
3 If you use improper screw, the product might
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
4 VESA compatible.
5 Please use VESA standard as below.
785mm(31 inch) or greater
yy
* Fastening screw: Diameter 6.0 mm x Pitch 1.0
mm x Length 10 mm
NOTE
Use screws that are listed on the VESA
yy
standard screw specifications.
The wall mount kit includes an installation
yy
manual and necessary parts.
The wall mount bracket is optional. You can
yy
obtain additional accessories from your local
dealer.
The length of screws may differ depending
yy
on the wall mount. Be sure to use the proper
length.
For more information, refer to the instructions
yy
supplied with the wall mount.
REMOTE CONTROL
9
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the Monitor correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
yy
may damage the remote control.
Make sure to point the remote control at the
yy
remote control sensor on the Monitor.
ENERGY SAVING
Adjusts the brightness of
the screen to reduce energy
consumption.
/ I (POWER)
Turns the Monitor on or off.
MONITOR ON / OFF
Turn off the monitor and then
turn it back on.
POWER
ARC
Selects the Aspect Ratio
Mode.
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
Number and Alphabet buttons
Enters numbers.
The alphabet selection is not
applicable.
DEF
MNO
WXYZ
CLEAR
This button selection is not
applicable.
MARK
Volume Up / Down
Adjusts the volume level.
ARC
PSM
PSM
Selects the Picture Status
Mode.
INPUT
Selects the input mode.
INPUT
OFF
ON
1/a/A Button
This button selection is not
applicable.
ENERGY
MONITOR
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
S.MENU
MUTE
Mutes all sounds.
OK
BACK
ID
TILE
EXIT
BRIGHTNESS Key
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to move
to the next file list.
ENG
ENGLISH
REMOTE CONTROL
10
REMOTE CONTROL
ENGLISH
ENG
POWER
ENERGY
MONITOR
MENU (See p.36)
Accesses the main menus
or saves your input and exit
menus.
INPUT
OFF
ON
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
Navigation buttons
Scrolls through menus or
options.
PSM
OK
Selects menus or options and
confirms your input.
AUTO
S.MENU
S.MENU
(SuperSign Menu Key)
This button selection is not
applicable.
OK
BACK
TILE
ID
ON
ID ON/OFF
When more than one monitor
is present in the same room,
this allows you to control them
individually.
E
MUTE
MENU
BACK
Allows the user to move back
one step.
P
BRIGHT A
NESS G
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
OFF
EXIT
EXIT
Clears all on-screen displays
and returns to Monitor
viewing from any menu.
TILE
Selects the TILE Mode.
USB Menu control buttons
Controls media playback.
USING THE MONITOR SET
11
Connecting to a PC
Your Monitor supports the Plug & Play* feature.
* Plug & Play: This is the function that allows a PC
to use the monitor without installing a driver.
NOTE
It is recommended to use the Monitor with
yy
the HDMI connection for the best image
quality.
Use a shielded signal interface cable, such
yy
as D-sub 15 pin signal cable and DVI cable,
with a ferrite core to maintain standard
compliance for the product.
If you turn the Monitor on when the set
yy
becomes cold, the screen may flicker. This
is normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
CAUTION
yyConnect the signal
input cable and tighten
it by turning the screws
clockwise.
yyD o n o t p r e s s t h e
screen with your finger for a long time as
this may result in temporary distortion on the
screen.
Avoid displaying a fixed image on the screen
yy
for a long period of time to prevent image
burn. Use a screensaver if possible.
ENG
ENGLISH
USING THE MONITOR
12
USING THE MONITOR SET
Transmits the analog video signal from your PC to
the Monitor. Connect the PC and the Monitor
set with the 15 pin signal cable as shown the
following illustrations.
Select RGB input source on the monitor.
Transmits the digital video signal from your PC to
the Monitor. Connect the PC and the Monitor
set with the DVI cable as shown the following
illustrations.
Select DVI-D input source on the monitor.
(not included)
(not included)
(not included)
Macintosh Adapter
(not included)
RGB OUT (PC)
AUDIO OUT
NOTE
Use the standard Macintosh
yy
adapter since an incompatible
adapter is available in the
market. (Different signaling
system)
Apple computers may require an adapter to
yy
connect to this monitor. Call or visit their web
site for more information.
AUDIO OUT
DVI-D connection
DVI OUT
ENGLISH
ENG
RGB connection
USING THE MONITOR SET
13
Transmits the digital video and audio signals from
your PC to the Monitor. Connect the PC and the
Monitor with the HDMI cable as shown in the
following illustrations.
Select HDMI input source.
Transmits the digital video and audio signals from
your PC to the Monitor. Connect the PC and the
Monitor with the Display Port cable as shown in
the following illustrations.
Select Display Port input source.
(not included)
NOTE
Use a High Speed HDMI™ Cable.
yy
Please check the PC environment if you
yy
cannot hear the sound in HDMI mode. Some
PCs require you to manually change the
default audio output to HDMI.
If you want to use HDMI PC mode, you must
yy
set PC/DTV to PC mode.
When HDMI PC is used, a compatiblity
yy
problem might occur.
DP OUT
(not included)
HDMI
Display Port connection
ENG
ENGLISH
HDMI connection
14
USING THE MONITOR SET
ENGLISH
ENG
Adjusting the screen
Customizing image options
Selecting an image mode
Customize basic and advanced options of each
image mode for the best screen performance.
Display images in its optimized settings by
selecting one of the preset image modes.
1 Press MENU to access the main menus.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to
PICTURE and press OK.
3 Press the Navigation buttons to scroll to
Picture Mode and press OK.
4 Press the Navigation buttons to scroll to an
image mode you want and press OK.
Mode
Vivid
2 Press the Navigation buttons to scroll to
PICTURE and press OK.
3 Press the Navigation buttons to scroll to
Picture Mode and press OK.
4 Press the Navigation buttons to scroll to an
image mode you want and press OK.
5 Select and adjust the following options, and
then press OK.
Description
Adjusts the video image for the retail
environment by enhancing the contrast,
brightness, color, and sharpness.
Standard
Adjusts the image for a normal
environment.
Cinema
Optimizes the video image for a cinematic
look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and
dynamic actions by emphasizing primary
colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast
gaming screen such as PCs or games.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Option
Description
Backlight
djusts the brightness of the screen
A
by controlling the LCD backlight. If
you decrease the brightness level,
the screen becomes darker and the
power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient
of the video signal. You may use
Contrast when the bright parts of the
picture are saturated.
Brightness
Adjusts the base level of the signal in
the picture. You may use Brightness
when the dark areas of the picture are
saturated.
Sharpness
Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and
green levels.
Color Temp.
Set to warm to enhance hotter Colors
such as red, or set to cool to make
picture bluish.
Advanced
Customizes the advanced options.
Refer to the Advanced image options.
(See p.39)
Control
Picture Reset
Restores the options to the default
setting.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
USING THE MONITOR SET
15
Adjusting the sound
Customize options of each image mode for the
best image quality.
This function works in the following mode:
yy
RGB[PC] mode.
Selecting an sound mode
1 Press MENU to access the main menus.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to
2 Press the Navigation buttons to scroll to
3 Press the Navigation buttons to scroll to
3 Press the Navigation buttons to scroll to Sound
4 Select and adjust following options, and then
4 Press the Navigation buttons to scroll to a
PICTURE and press OK.
Screen and press OK.
press OK.
Option
Description
This Monitor has 5 preset sound modes to
compliment different types of video content.
AUDIO and press OK.
Mode and press OK.
sound mode you want and press OK.
Mode
Description
Resolution
Selects a proper resolution. See
“Customizing PC display options”.
Standard
Select when you want standard-quality
sound.
Auto
Adjusts the screen position, clock, and
phase automatically.
The displayed image may be unstable for
a few seconds while the configuration is
in progress.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Sport
Select when you watch sport events.
Game
Selects when you play games.
Config.
Position/
Adjusts the options when the picture is
Size/Phase not clear, especially when characters are
shaky. Run Auto Config. before adjusting
these.
Reset
Restores the options to the default
setting.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ENG
ENGLISH
Customizing PC display options
16
USING THE MONITOR SET
Customizing sound options
ENGLISH
ENG
You may customize options of each sound mode
for the best sound quality.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to
AUDIO and press OK.
Using additional options
Adjusting aspect ratio
Resize the image to view the image at its optimal
size by pressing ARC while you are watching
content.
3 Press the Navigation buttons to scroll to Sound
Mode and press OK.
CAUTION
4 Press the Navigation buttons to scroll to a
sound mode you want and press OK.
5 Select and adjust following options, and then
press OK.
Option
Description
Infinite
LG's Infinity Sound option provides 5.1
Sound
channel stereo quality sound from two
If a fixed image displays on the screen for a
yy
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
If the aspect ratio is set to 4:3 for a long
yy
period of time, image burn may occur on the
letterboxed area of the screen.
speakers.
Treble
Controls the dominant sounds in the
output. When you turn up the treble, it
NOTE
will increase the output of the higher
frequency range.
Bass
Controls the softer sounds in the
output. When you turn up the bass, it
You can also change the image size by
yy
accessing the main menus.
will increase the output of the lower
frequency range.
Reset
Resets the sound mode to the default
setting.
MODE AV Component RGB
Display
DVI-D
HDMI
Port
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ARC
PC
DTV
PC
DTV
PC
DTV
PC
16:9
o
o
o
o
o
o
o
o
o
Just Scan
x
o
x
o
x
o
x
o
x
1:1
x
x
o
x
o
x
o
x
o
4:3
o
o
o
o
o
o
o
o
o
Zoom
o
o
x
o
x
o
x
o
x
Cinema
Zoom 1
o
o
x
o
x
o
x
o
x
USING THE MONITOR SET
17
- 4:3 : This selection will allow you to view a
picture with an original 4:3 aspect ratio, black
bars will appear on both the left and right of the
screen.
- Just Scan : This Selection will allow you view
the picture of best quality without loss of original
picture in high resolution image. Note: If there is
noise in original Picture, You can see the noise
at the edge.
- Zoom : This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
Just Scan
- 1:1 : The aspect ratio is not adjusted from the
original. (Only Display Port PC, HDMI PC,
DVI-D PC, RGB PC)
- Cinema Zoom 1 : Choose Cinema Zoom
when you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
ENG
ENGLISH
- 16:9 : This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
18
USING THE MONITOR SET
Using the input list
ENGLISH
ENG
Selecting an input source
1 Press INPUT to access the input source list.
-The connected device displays on each input
source.
2 Press the Navigation buttons to scroll to one of
the input sources and press OK.
Input source
Description
AV(CVBS)
Watch video from a VCR or other
external devices.
Component
Watch content from a DVD or other
external devices, or through a
digital set-top box
RGB
View a PC display on the screen
Display Port
Watch content from a PC, DVD
of Digital set-top box other high
definition devices
DVI-D
View a PC display on the screen
HDMI
Watch content from a PC, DVD
of Digital set-top box other high
definition devices
ENTERTAINMENT
19
Connecting to a wired network
(Depending on model)
1 Press MENU to access the main menus.
Connect the display to a local area network (LAN)
via the LAN port as shown on the following illustration and set up the network settings.
This monitor only supports a wired network connection.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
For detail information, contact your internet provider or router manual.
LAN
Router
@
Internet
Internet
To set up the network seetings: (Even if your display has already connected automatically, running
setup again will not harm anything),
LAN
WAN
2 Press the Navigation buttons to scroll to NETWORK and press OK.
3 Press the Navigation buttons to select Network Setting and press OK.
4 If you already set Network Setting, select
Resetting. The new connection settings resets
the current network settings.
5 Select IP Auto Setting or IP Manual Setting.
-If selecting IP Manual Setting, press the
Navigation and Number buttons. IP addresses will need to be input manually.
-IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area network (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broadband modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be determined.
6 When you are finished, press EXIT.
ETHERNET
Cable modem
CAUTION
yy
Do not connect a modular phone cable to the
LAN port.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
CAUTION
yy
Network setting menu will not be available
until the display is connected to physical
network.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
ENG
ENGLISH
ENTERTAINMENT
20
ENTERTAINMENT
NOTE
ENGLISH
ENG
yy
If you want to access the Internet directly on
your display, the internet connection should
always be on.
yy
If you cannot access the Internet, check
the network conditions from a PC on your
network.
yy
When you use Network Setting, check the
LAN cable or check if DHCP in the router is
turned on.
yy
If you do not complete the network settings,
the network may not work properly.
Tips for Network setting
yy
Use a standard LAN cable with this display. Cat5
or better with a RJ45 connector.
yy
Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
home network, quickly power off and/or disconnect the power cable of the home network router
or cable modem. Then power on and/or connect
the power cable again.
yy
Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable
terms of service. For details, contact your ISP.
yy
LG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions associated with your internet connection, or other
connected equipment.
yy
LG is not responsible for problems within your
internet connection.
yy
You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
yy
Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
Internet connection.
yy
Any fees charged by an ISP including, without
limitation, connection charges are your responsibility.
yy
A 10 Base-T or 100 Base-TX LAN port is
required when using a wired connection to this
display. If your internet service does not allow for
such a connection, you will not be able to connect the display.
yy
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices you
can connect at the same time. (If your ISP limits
sub-scription to one device, this display may
not be allowed to connect when a PC is already
connected.)
yy
The use of a “Router” may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
Network Status
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and press OK.
3 Press the Navigation buttons to select Network Status.
4 Press OK to check the network status.
5 When you are finished, press EXIT.
Option
Setting
Test
Close
Description
Return to the network setting menu.
Test the current network status after setting the network.
Return to the previous menu.
ENTERTAINMENT
Connecting USB storage devices
or
CAUTION
yy
Do not turn the display off or remove a USB
storage device while the EMF(my media)
Menu is activated, as this could result in
loss of files or damage to the USB storage
device.
yy
Back up your files saved on a USB storage
device frequently, as you may lose or damage the files and this may be not covered by
the warranty.
Tips for using USB storage devices
yy
Only a USB storage device is recognizable.
yy
If the USB storage device is connected
through a USB hub, the device is not recognizable.
yy
A USB storage device using an automatic
recognition programme may not be recognized.
yy
A USB storage device which uses its own
driver may not be recognized.
yy
The recognition speed of a USB storage
device may depend on each device.
yy
Please do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
yy
Please do not connect the USB storage
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction or fail to be played. Never forget
to use only a USB storage device which has
normal music files, image files or movie files.
yy
Please use only a USB storage device which
was formatted as a FAT32 file system or
NTFS file system provided with the Windows operating system. In case of a storage
device formatted as a different utility program
which is not supported by Windows, it may
not be recognized.
yy
Please connect power to a USB storage
device(over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
yy
Please connect a USB storage device with
the cable offered by the device maker.
yy
Some USB storage devices may not be supported or operated smoothly.
yy
File alignment method of USB storage
device is similar to Window XP and filename
can recognize up to 100 English characters.
yy
Be sure to back up important files since data
stored in a USB memory device may be
damaged. We will not be responsible for any
data loss.
ENG
ENGLISH
You can connect USB storage devices such as
a USB flash memory, external hard drive to the
display and use multimedia features .
Connect a USB flash memory or USB memory
card reader to the Display as shown on the following illustration. The My media screen appears.
21
22
ENTERTAINMENT
ENGLISH
ENG
yy
If the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
- Please use a power adaptor for an external
power source. We do not guarantee an USB
cable for an external power source.
yy
If your USB memory device has multiple
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
yy
If a USB memory device is connected to a
USB multi-card reader, its volume data may
not be detected.
yy
If the USB memory device does not work
properly, disconnect and reconnect it.
yy
How fast a USB memory device is detected
differs from device to device.
yy
If the USB is connected in Standby Mode,
specific hard disk will automatically be
loaded when the display is turned on.
yy
The recommended capacity is 1 TB or less
for a USB external hard disk and 32 GB or
less for USB memory.
yy
Any device with more than the recommended
capacity may not work properly.
yy
If a USB external hard disk with a “Energy
Saving” function does not work, turn the
hard disk off and on again to make it work
properly.
yy
USB storage devices below USB 2.0 are
supported as well. But they may not work
properly in the movie list.
yy
Maximum of 999 folders or files can be recognized under one folder.
yy
It is recommended to use a certified USB
storage device and cable. Otherwise, a USB
storage device may not be detected or a
playback error may occur.
yy
Only a USB memory stick can be used to
play back the files distributed and stored
by SuperSign Manager. A USB hard disk or
multi-card reader will not work.
yy
Only an FAT 32 file formatted storage device
can play back the files distributed and stored
by SuperSign manager.
yy
A USB 3.0 storage device may not work.
Browsing files
Access the photo, music, or movie lists and browse
files.
1 Connect a USB storage device.
2 Press MENU to access the main menus.
3 Press the Navigation buttons to scroll to My
Media and press OK.
4 Press the Navigation buttons to choose
from Movie List, Photo List, Music List or
Contents List and press OK.
Movie List
Photo List
Music List
2
1
Page 1/1
Photo List
USB External
001
002
010
011
Drive1
Page 1/1
003
004
005
006
012
013
014
015
Move
To Music List
Contents List
View
Change Numbers
007
008
Page Change
Mark Mode
009
4
5
Mark
Exit
3
No.
Description
1
Moves to upper level folder
2
Current page/Total pages
Corresponding buttons on the
remote control
Current page/ total pages of
contents under the folder
4
focused on 1
Contents under the folder
5
focused on 1
Buttom
Description
Repeatedly, press the GREEN button to
converted to Movie List->Photo List,
Green
Photo List->Music List, Music Listbutton
>Contents List or Contents List->Movie
List.
Yellow A method to view in 5 large thumbnail
button or simple list.
Blue
Convert to Mark Mode.
button
3
ENTERTAINMENT
Supported File Formats
Photo JPEG
Type
Movie
Supported file format
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T
RP,TP,ASF,WMV,FLV)
JPG
Video format : DivX 3.11, DivX4, DivX5. DivX6
Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10
beta-1/beta-2,
Profile
supported
file format
yy SOF0:
baseline
yy SOF1:
Extend
Sequential
yy SOF2:
Progressive
Photo size
yy Min: 64 x 64
yy Max Type:
1366 x 768
Bit rate
32 kbps to 320
kbps
32 kHz, 44.1
kHz, 48 kHz
(MPEG1 L3)
PNG
BMP
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.
mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.
avi(motion-jpeg)/*.
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting
file
Item
Music MP3
Sampling
rate
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,
JPEG, Sorenson H.263
16 kHz, 22.05
kHz, 24 kHz
(MPEG2 L3)
Audio format : Dolby Digital, AAC, Mpeg, MP3,
LPCM, HE-AAC, ADPCM, WMA
Bit rate : within 32 kbps to 320 kbps(MP3)
8kHz, 11.025
kHz, 12 kHz
(MPEG2.5 L3)
External Subtitle format : *.smi/*.srt/*.sub
(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
Photo
Internal Subtitle format : only, XSUB (It is the
subtitle format used in DivX6 files)
JPEG
Music
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
yy You can play JPEG files only.
yy Non-supported files are displayed in the form
of predefined icon.
MP3
Bit rate 32 to 320
yy Sampling rate MPEG1 Layer3 : 32 kHz, 44.1
kHz, 48 kHz
yy Sampling rate MPEG2 Layer3 : 16 kHz, 22.05
kHz, 24 kHz
yy Sampling rate MPEG2.5 Layer3 : 8 kHz,
11.025 kHz, 12 kHz
File Extensions : *.cts/ *.cse
Content
(when
Movie
using
File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*.
SuperSign
trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*.
Manager)
wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*.
mkv(motion JPEG)
Video format: MPEG1, MPEG2, MPEG4,H.264/
AVC, DivX 3.11, DivX4, DivX5. DivX6,
Xvid 1.00,Xvid 1.01, Xvid 1.02, Xvid 1.03,Xwvid
1.10-beta1/2, JPEG, VC1(WVC1/WMV3)
Audio format: MP2,MP3,Dolby Digital, LPCM,
AAC, HE-AAC,LPCM, ADPCM, WMA, MP3
Viewing movies
Play video files on display. Your display shows all
of the video files saved in a USB storage device or
shared folder on a PC.
1 Press the Navigation buttons to scroll to My
Media and press OK.
2 Press the Navigation buttons to scroll to Movie
List and press OK.
3 Press the Navigation buttons to scroll to a
folder you want and press OK.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
ENG
ENGLISH
File
Extensions
23
24
ENTERTAINMENT
ENGLISH
ENG
Drive1
USB1 USB Drive
001
002
005
006
Page 1/1
003
Move
To Photo list
6 Control playback by using the following buttons.
Page 1/1
Movie List
Change Numbers
004
Play
Page Change
Mark
01:02:30 / 02:30:25
Option
Exit
Mark Mode
Hide
Exit
Page 1/1
Movie List
Mark Mode
Drive1
USB1 USB Drive
001
002
005
Page 1/1
003
004
Button
051. Apple_ ......
02:30:25
006
Description
Stops the playback
Plays a video
Pauses or resumes the playback
Scans backward in a file
Move
Play Marked
Mark All
Unmark All
Mark
Page Change
Exit Mark Mode
Scans forward in a file
Mark
Exit
Show the Option menu.
Hide the menu on the full-sized screen.
Menu
Play Marked
Description
Play the selected movie file.
Once a movie file finishes playing,
the next selected one will be played
automatically.
Mark All
Mark all movie files on the screen.
Unmark All
Deselect all marked movie files.
Exit Mark Mode Exit the Mark Mode.
5 Play a movie.
NOTE
yy
Non-supported files are displayed the preview
image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
Return to Movie List.
Skips to specific points in a file during playback. The time of a specific
or
point will appear on the status bar. In
some files, this function may not work
properly.
Press the
ENERGY
SAVING
ENERGY SAVING button
repeatedly to increase the brightness
of your screen.
ENTERTAINMENT
Tips for using playing video files
When you are watching the movie by Movie
yy
List function, you can adjust an image by
Energy Saving key on the remote control.
User setup for each image mode does not
operate.
Video options
1 Press MENU to access the Pop-Up menus.
2 Press the Navigation buttons to scroll to Set
Video Play., Set Video. or Set Audio. and
press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
yy
When replaying the video file after stopping,
you can play from where it stopped previously.
ENG
ENGLISH
yy
Some user-created subtitles may not work
properly.
yy
Some special characters are not supported
in subtitles.
yy
HTML tags are not supported in subtitles.
yy
Subtitles in languages other than the supported languages are not available.
yy
The screen may suffer temporary interruptions (image stoppage, faster playback, etc.)
when the audio language is changed.
yy
A damaged movie file may not be played
correctly, or some player functions may not
be usable.
yy
Movie files produced with some encoders
may not be played correctly.
yy
If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
yy
HD videos with a maximum of
1920x1080@25/30P or 1280x720@50/60P
are supported, depending on the frame.
yy
Videos with resolutions higher than
1920X1080@25/30P or 1280x720@50/60P
may not work properly depending on the
frame.
yy
Movie files other than the specified types and
formats may not work properly.
yy
Max bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
yy
We do not guarantee smooth playback of
profiles encoded level 4.1 or higher in H.264/
AVC.
yy
DTS Audio codec is not supported.
yy
A movie file more than 30 GB in file size is
not supported for playback.
yy
A DivX movie file and its subtitle file must be
located in the same folder.
yy
A video file name and its subtitle file name
must be identical for it to be displayed.
yy
Playing a video via a USB connection that
doesn’t support high speed may not work
properly.
yy
Files encoded with GMC(Global Motion
Compensation) may not be played.
25
26
ENTERTAINMENT
When you select the Set Video Play,,
ENGLISH
ENG
1 Press the Navigation buttons to scroll to show
Code Page
Latin1
German, Italian, Swedish, Finnish,
the Picture Size, Audio Language, Subtitle
Language or Repeat.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
Support Language
English, Spanish, French,
Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic,
Welsh, Irish, Catalan,Valencian
Bosnian, Polish, Croatian, Czech,
Latin2
Slovak, Slovenian, Serbian,
Hungarian
Menu
Picture Size
Description
Selects your desired picture
Audio
format during movie play.
Changes the Language Group of the
Language
audio during movie play. Files
with a single audio track cannot be
Latin4
Estonian, Latvian, Lithuanian
Cyrillic
Bulgarian, Macedonian, Russian,
Ukrainian, Kazakh
Greek
Greek
Korean
Korean
selected.
Subtitle Lan-
Turn on/off the subtitle.
guage
Language
Activated for SMI subtitle and
can select the language within the
subtitle.
Code Page
Can select the font for subtitle.
When set to default, same font as
general menu will be used.
Sync
Adjusts the time synchronisation of
the subtitle from -10 secs to +10 secs
by steps of 0.5 secs during movie
play.
Position
Changes the position of the
subtitle either up or down during
movie play.
Size
Selects your desired Subtitle size
during movie play.
Repeat
Turn on/off repeat function of
movie playback. When turned on, the
file within the folder will be played
back repeatedly. Even when the
repeated playback
is turned off, it can run the playback if
the file name is similar to the previous
file.
NOTE
yy
Only 10,000 of sync blocks can be supported within the subtitle file.
yy
When playing a video, you can adjust the
Picture Size by pressing the RATIO button.
yy
Subtitles in your language are only supported when the OSD menu is also in this
language.
yy
The code page options may be disabled depending on the language of the subtitle files.
yy
Select the appropriate code page for the
subtitle files.
ENTERTAINMENT
When you select the Set Video,,
appropriate adjustments.
Page 1/1
Photo List
USB1 USB Drive
001
Drive1
002
010
011
Page 1/1
003
004
005
006
012
013
014
015
When you select the Set Audio,,
Move
View
Change Numbers
To Music List
008
009
Page Change
Mark
Exit
Mark Mode
1 Press the Navigation buttons to scroll to show
the Sound Mode, Clear Voice II or Balance.
007
Page 1/1
Photo List
Mark Mode
USB1 USB Drive
Drive1
Page 1/1
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
001
010
002
011
003
004
005
006
012
013
014
015
Move
Viewing photos
View Marked
Mark All
007
Mark
Unmark All
008
009
Page Change
Exit Mark Mode
Mark
Exit
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
View Marked
Display the selected photo file.
1 Press the Navigation buttons to scroll to My
Mark All
Mark all photo files on the screen.
Unmark All
Deselect all marked photo files.
Media and press OK.
2 Press the Navigation buttons to scroll to Photo
List and press OK.
3 Press the Navigation buttons to scroll to a
folder you want and press OK.
Menu
Description
Exit Mark Mode Exit the Mark Mode.
5 View photos.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
NOTE
yy
Non-supported files are displayed the preview image by icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
ENG
ENGLISH
1 Press the Navigation buttons to scroll to make
27
28
ENTERTAINMENT
Using photo options
ENGLISH
ENG
Use the following options while viewing photos.
ENER- Press the ENERGY SAVING button
GY SAVING repeatedly to change the brightness of
your screen.
Option
yy Slide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
yy TransitionEffect: Set the view mode
of the slideshow.
yy BGM: Selects a music folder for the
background music.
NOTE
yyYou cannot change the music
folder while the background
music is playing.
yyYou can only select the MP3
folder saved on the device that
currently displays the photo.
2/13
Slideshow
Options
Option
BGM
Hide
Exit
Number of selected photos
Option
Description
Slideshow Starts or stops a slideshow with selected
photos.
If there are no selected photos, all photos saved in the current folder display
during a slideshow.
Select Option to set the speed and view
mode of the slideshow.
BGM
Turns the background music on or off.
To set the background music folder,
select Option.
You can adjust Option by MENU button
on the remote control.
Rotate
Rotates photos clockwise (90°, 180°,
270°, 360°).
NOTE
yyThe supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than the
supported resolution size.
Zoom
Enlarges the image to 200% or 400%.
NOTE
yyZoom to 200% or 400% only
work for image of 1372×772
pixel size or larger.
yyFor image of 960×540 pixel
size or larger, only zoom to
400% works properly.
Hide
Hides the option window.
To display the options, press OK.
EXIT
Return to Photo List.
Photo options
1 Press MENU to show the Option menus.
2 Press the Navigation buttons to scroll to Set
Photo View., Set Video. or Set Audio. and
press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
ENTERTAINMENT
29
When you select the Set Photo View,
2 Press the Navigation buttons to scroll to make appropriate adjustments.
Transition Effect Option
Option
Description
Sliding
Pushes the current slide out of view as it plays to the next slide.
Stairs
Pushes the current slide in a staircase shape as it plays to the next slide.
Door Open
/Close
Pushes the current slide like opening or closing the door as it plays to the next slide.
Shutter
Pushes the current slide like drawing or pulling down the blind as it plays to the next slide
Fade In
Fades the slide out slowly before playing to the next slide.
ENG
ENGLISH
1 Press the Navigation buttons to scroll to select Slide Speed,Transition Effect or BGM.
30
ENTERTAINMENT
When you select the Set Video,
Listening to music
ENGLISH
ENG
1 Press the Navigation buttons to scroll to make
appropriate adjustments.
1 Press the Navigation buttons to scroll to My Media and press OK.
2 Press the Navigation buttons to scroll to Music
When you select the Set Audio,
1 Press the Navigation buttons to scroll to show
the Sound Mode, Clear Voice II or Balance.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
List and press OK.
3 Press the Navigation buttons to scroll to a folder
you want and press OK.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Music List
USB1 USB Drive
Drive1
001. - B01.mp3
00:00
Page 1/1
002. -B02.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Move
Play
Page Change
Change Numbers
To Movie List
Mark Mode
Mark
Exit
Page 1/1
Music List
Mark Mode
USB1 USB Drive
Drive1
001. - B01.mp3
00:00
Page 1/1
002. -B02.mp3
00:00
003. B03.mp3
00:00
004. - B04.mp3
00:00
005. - B05.mp3
00:00
Move
Play Marked
Menu
Play Marked
Mark All
Unmark All
Mark All
Mark
Page Change
Unmark All
Exit Mark Mode
Exit
Description
Display the selected music file.
Mark all music files on the screen.
Deselect all marked music files.
Exit Mark Mode Exit the Mark Mode.
5 Play music.
Mark
ENTERTAINMENT
6 Control playback by using the following buttons.
004. - B04.mp3
00:00
Drive1
005. - B05.mp3
00:00
Page 1/1
006. - B06.mp3
00:00
007. - B07.mp3
00:00
005. - B05.mp3
02:30 / 03:25
Option
Play with Photo
Button
NOTE
008. - B08.mp3
00:00
Hide
Exit
Description
Stops playback
Plays a music file
Pauses or resumes playback
Skips to the next file
Skips to the previous file
or
When playing,
When you press the
button, the previous music file will be played.
Green
button
ENERGY
SAVING
Option
Hide
EXIT
or
When you press the
button, the next
music file will be played.
Start playing the selected music files and
then move to the Photo List.
Press the
ENERGY SAVING button
repeatedly to change the brightness of
your screen.
Show the Option menu.
Hides the option window.
To display the options, press OK.
When you press the EXIT button while
the Music player is displayed, only the
music will be stopped and the player will
not return to normal viewing.
When you press the EXIT button while
the music is stopped or while the music
player is hidden, the player will return to
normal viewing.
When using the < or > button during
playback a cursor indicating the position
can be played.
yy
Non-supported files are displayed the preview image by icon only .
yy
Abnormal files are displayed in the form of
bitmap .
yy
A damaged or corrupted music does not play
but displays 00:00 in playtime.
yy
A music downloaded from a paid service with
copyright protection does not start but displays inappropriate information in playtime.
yy
If you press OK,
buttons, screen saver is
stopped.
yy
The PLAY( ), Pause( ),
,
,
buttons on the remote control are also available
in this mode.
yy
You can use the
button to select the next
music and the
button to select the previous music.
file name
002. B02.mp3
00:31 / 04:04
Time elapsed /Duration
ENG
ENGLISH
3 file(s) Marked
Tips for playing music files
This unit doesn't support the ID3 Tag
yy
embedded MP3 files.
Page 1/1
Music List
31
32
ENTERTAINMENT
Music options
ENGLISH
ENG
1 Press MENU to access the Pop-Up menus.
2 Press the Navigation buttons to scroll to Set Audio Play. or Set Audio. and press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
When you select the Set Audio Play.,
Viewing the Contents List
Plays back the stored files using the Export option
in SuperSign Manager.
1 Press the Navigation buttons to scroll to My
Media and press OK.
2 Press the Navigation buttons to scroll to Contents List and press OK.
3 Press the Navigation buttons to scroll to a
folder you want and press OK.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
test1.cts
07/01/2011
1 Press the Navigation buttons to scroll to select
Page 1/1
Contents List
USB1 USB Drive
Drive1
Page 1/1
test2.cts
07/01/2011
test3.cts
07/01/2011
test4.cts
07/01/2011
test5.cts
07/01/2011
the Repeat or Random.
Move
2 Press the Navigation buttons to scroll to make
To Movie List
Change Numbers
Play
P
Page Change
Exit
appropriate adjustments.
NOTE
When you select the Set Audio,,
1 Press the Navigation buttons to scroll to select
the Sound Mode, Clear Voice II or Balance.
2 Press the Navigation buttons to scroll to make
appropriate adjustments.
yy
While playing media files from Contents List,
only the BACK, EXIT or Volume button are
available. Selecting the BACK or EXIT button
stops playing media files and returns to the
screen view mode.
yy
If there is the AutoPlay folder in the USB
device and its files are in supported formats,
they can be played back automatically when
the USB device is connected to the monitor.
ENTERTAINMENT
33
DivX® VOD Guide
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10
digit DivX registration code from your device at
www.divx.com/vod.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to MY
MEDIA and press OK.
3 Press the Blue button.
4 Press the Navigation buttons to scroll to DivX
Reg. Code and press OK.
5 View the registration code of your display.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
You must register your device
to play DivX protected videos.
Registration code : **********
Register at http://vod.divx.com
Close
NOTE
yy
While you are checking the registration code,
some buttons may not work.
yy
If you use the DivX registration code of
another device, you cannot play the rented
or purchased DivX file. Make sure to use the
DivX registration code assigned to your TV.
yy
The video or audio files that are not converted by the standard DivX codec may be
corrupted or not be played.
yy
The DivX VOD code allows you to activate
up to 6 devices under one account.
ENG
ENGLISH
DivX® VOD Registration
34
ENTERTAINMENT
DivX® VOD Deregistration
ENGLISH
ENG
You should deregister your device with 8 digit DivX
deregistration code from your device at www.divx.
com/vod.
1 Press MENU to access the main menus.
Using PIP/PBP
Videos or pictures stored on the USB device can
be displayed on a single monitor by dividing them
into the main and subscreens. (See p.46)
2 Press the Navigation buttons to scroll to MY
MEDIA and press OK.
1 Press the MENU button to move to OPTION
3 Press the Blue button.
4 Press the Navigation buttons to scroll to Deactivation and press OK.
5 Press the Navigation buttons to select Yes to
and press OK.
2 Press PIP/PBP to select PIP or PBP and then
press OK.
confirm.
PIP/PBP
Mode
Deregistration code :
********
Deregister at http://vod.divx.com
Continue with registration?
Yes
Move
Prev.
Off
Position
PIP
Size
PBP
No
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
Once the deregistration is executed, you
yy
must register your device again to see
DivX® VOD contents.
3 Select Movie List or Photo List from My
Media.
Movie List
Photo List
Music List
Contents List
ENTERTAINMENT
4 Select a file you want and then press OK.
6 For sound select either Main or Sub. You must
Drive1
USB1 USB Drive
001
002
005
006
Page 1/1
003
004
051. Apple_ ...
02:30:25
Select the sound path.
Main
Move
Change Numbers
Play
Page Change
Sub
Mark
Exit
Mark Mode
7 The sub screen is displayed on the main screen.
5 Select the PIP or PBP icon from the play list.
01:02:30 / 02:30:25
Exit
Hide
Option
< MOVIE LIST >
2/13
Slideshow
BGM
< PHOTO LIST >
Option
Hide
Exit
ENG
ENGLISH
to select the output sound before running the
PIP or PBP function.
Page 1/1
Movie List
To Photo list
35
36
CUSTOMIZING SETTINGS
ENGLISH
ENG
CUSTOMIZING SETTINGS
Accessing main menus
MARK
ARC
PSM
1 Press MENU to access the main menus.
P
BRIGHT A
NESS G
E
MUTE
MENU
2 Press the Navigation buttons to scroll to one of the following menus and
press OK.
S.MENU
OK
BACK
3 Press the Navigation buttons to scroll to the setting or option you want
and press OK.
AUTO
TILE
EXIT
ID
ON
OFF
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE (See p.37)
Adjusts the image size,
quality, or effect.
PICTURE
OPTION (See p.42)
Customizes the general
settings.
OPTION
AUDIO (See p.40)
Adjusts the sound quality,
effect, or volume level.
AUDIO
NETWORK
TIME
MY MEDIA
NETWORK (See p.47)
Sets up the network
setting.
TIME (See p.41)
Sets the time, date, or
Timer feature.
MY MEDIA (See p.22)
Display and play movie,
photo and music content
stored on your USB
CUSTOMIZING SETTINGS
PICTURE settings
PICTURE
Move
37
OK
1 Press MENU to access the main menus.
Energy Saving
2 Press the Navigation buttons to scroll to PICTURE and
press OK.
Smart Energy Saving
Picture Mode
Screen
3 Press the Navigation buttons to scroll to the setting or
option you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
The available picture settings are described in the following:
Setting
Aspect Ratio
Description
Changes the image size to view images at its optimal size (See p.16).
Sets to automatically adjust the screen brightness corresponding to the surroundings.
Energy Saving Level
Smart Energy
Saving
Picture Mode
Auto
Adjust automatically
Off
Disables Energy Saving function
Minimum/
Medium/
Maximum
Selects the brightness level of the backlight.
Screen off
The screen turns off in 3 seconds.
Adjusts the backlight and contrast depending on the screen brightness.
Level
Off
Disables the Smart Energy Saving function.
On
Enables the Smart Energy Saving function to save power consumption as much
as the value set in the smart energy saving rate.
Selects one of the preset image or customizes options in each mode for the best Monitor screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the Monitor .
Mode
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, Colour, and sharpness.
Standard
Adjusts the image for the normal environment.
Cinema
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and dynamic actions by emphasizing primary
Colours such as white, grass, or sky blue.
Game
Optimizes the video image for a fast gaming screen such as PCs or games.
ENG
ENGLISH
Aspect Ratio
38
CUSTOMIZING SETTINGS
Setting
ENGLISH
ENG
SCREEN
(In RGB
Mode Only)
Description
Customizes the PC display options in RGB mode.
Option
Resolution
Selects a proper resolution. See “Customizing PC display options”.
Auto Config.
Adjusts the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky. Run Auto Config. before adjusting these.
Reset
Restores all options to the default setting.
Picture Mode options
Setting
Description
Backlight
djusts the brightness of the screen by controlling the LCD backlight. If you decrease the
A
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture. You may use Brightness when the dark part
of the picture is saturated.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Color Temp.
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Advanced Control
Customizes the advanced options. Refer to the Advanced image options. (See p.39).
Picture Reset
Restores the options to the default setting.
NOTE
When using the Smart Energy Saving function, the screen may look saturated in the white area of a
yy
still image.
If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is
yy
disabled.
CUSTOMIZING SETTINGS
39
Advanced Control
Description
Adjusts the contrast to keep it at the best level according to the brightness of the screen.
The
picture is improved by making bright parts brighter and dark parts darker. (Function works in
the following mode - AV(CVBS), Component, HDMI-DTV, Display Port-DTV)
Dynamic Color
(Off/High/Low)
Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances
hue, saturation and luminance so that red, blue, green and white look more vivid. (Function
works in the following mode - AV(CVBS), Component, HDMI-DTV, Display Port-DTV)
Clear White
(Off/High/Low)
Make the white area of screen brighter and more white.
Skin Color
(-5 to 5)
It detects the skin area of video and adjusts it to express a natural skin color.
Noise Reduction
(Off/High/Medium/Low)
educes screen noise without compromising video quality. (Function works in the following
R
mode - AV(CVBS), Component, HDMI-DTV, Display Port-DTV)
Digital Noise Reduction This option reduces the noise produced while creating digital video signals.
(Off/High/Medium/Low)
Gamma
(High/Medium/Low)
Set your own gamma value. On the monitor, high gamma values display whitish images and
low gamma values display high contrast images.
Black Level
(High/Low)
Low: The picture of the screen gets darker.
High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - AV(CVBS), Component, HDMI-DTV, Display PortDTV)
ENG
ENGLISH
Setting
Dynamic Contrast
(Off/High/Medium/Low)
40
CUSTOMIZING SETTINGS
AUDIO settings
AUDIO
ENGLISH
ENG
1 Press MENU to access the main menus.
Clear Voice II
2 Press the Navigation buttons to scroll to AUDIO and press
Sound Mode
Move
OK
Balance
OK.
Digital Audio Input
Speaker
3 Press the Navigation buttons to scroll to the setting or
option you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Clear Voice ll
By differentiating the human sound range from others,it helps users makes dialog easier to
understand.
Balance
Adjusts balance between the left and right speakers according to your room environment.
Sound Mode
Mode
Standard
Select when you want standard-quality sound.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Sport
Select when you watch sport events.
Game
Selects when you play games.
Digital Audio
Input
HDMI/Display Port: Outputs the sound of digital signal from HDMI and display ports through the
monitor speaker.
Audio In: Outputs the sound through the monitor speaker by connecting HDMI and display ports
to the Audio In port.
Speaker
ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.)
OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.
Sound Mode options
Setting
Description
Infinite Sound
LG's Infinity Sound option provides 5.1 channel stereo sound from two speakers.
Treble
Controls the dominant sounds in the output. When you turn up the treble, it will increase the
output to the higher frequency range.
Bass
Controls the softer sounds in the output. When you turn up the bass, it will increase the output
to the lower frequency range.
Reset
Resets the sound mode to the default setting.
CUSTOMIZING SETTINGS
TIME settings
TIME
2 Press the Navigation buttons to scroll to TIME and press
On Time
OK
Off Time
OK.
Sleep Timer
Power On Delay
3 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
Auto Off
Automatic Standby
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
Off/On Time
Sets the time to turn on or off the Monitor.
Sleep Timer
Sets the length of time until the Monitor to turns off. When you turn the Monitor off and turn
it on again, the Sleep Timer will be set to off.
Power on delay
When connecting multiple monitors and turning the power on, the monitors are turned on individually
to prevent overload.
Auto off
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
Automatic
Standby
If you do not use the monitor for more than 4 hours, it will be in off mode automatically.
NOTE
yyOff/On Time can be saved for up to seven schedules; the Monitor is turned on or off at the preset time in the schedule
list. If multiple preset times are stored in the schedule list, this function works at the nearest time from the current time.
yyThe scheduled power-off function works properly only when the device time is set correctly.
yyWhen the scheduled power-on and power-off times are the same, the power-off time has priority over the power-on time
if the set is turned on, and vice versa if the set is turned off.
yy"The ""Automatic Standby"" and ""Auto off"" functions may not be available in some countries."
ENG
ENGLISH
1 Press MENU to access the main menus.
Clock
Move
41
42
CUSTOMIZING SETTINGS
OPTION settings
OPTION
Move
OK
ENGLISH
ENG
Language
1 Press MENU to access the main menus.
Power Indicator
2 Press the Navigation buttons to scroll to OPTION and press
OK.
ISM Method
DPM Select
Fail Over
3 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
Factory Reset
Set ID
Tile Mode
PIP/PBP
-To return to the previous level, press BACK.
Key Lock
Product/Service Info.
4 When you are finished, press EXIT.
Portrait Mode
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Language
To choose the language in which the control names are displayed.
Power Indicator
Use this function to set the power indicator on the front side of the product to On or Off.
ISM Method
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal
Leave on normal if you don't foresee image burn in being a problem.
Orbiter
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White Wash
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
DPM Select
A user can choose to turn the power saving mode on / off.
Fail Over
If there is no input signal, it automatically switches to another input with signal.
Setting
Off
Stops auto switch of the input source.
Auto
Switches to another input source with video signal if no video signal comes
from the current input source.
Manual
Selects the priority of input source for auto switch.
When several input sources are found, the input source with a higher priority
will be selected.
Factory Reset
Select this option to return to the default factory settings.
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 99) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
CUSTOMIZING SETTINGS
Setting
Description
Tile Mode
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB Cable by distributor and
RS-232C.
Tile mode and choose Tile alignment and set the ID of the current product to
set location.
* Only after pressing the SET button the adjustments made to the settings will
be saved.
- Tile mode : column x row ( c = 1, 2, 3, 4, 5 r = 1, 2, 3, 4, 5)
- 5 x 5 available.
- Configuration of an integration screen is also available as well as
configuration of One by one Display.
Auto Config.
Adjusts the screen position automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
PC Position
Moving the screen position horizontally and vertically.
PC Size
Adjust the horizontal and vertical size of the screen taking into account the size
of the bezel.
Natural
The image is omitted by the distance between the screens to be naturally
shown.
Reset
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
NOTE
yyIf Tile Mode is enabled, Smart Energy Saving and the Auto option in Energy Saving will be
disabled to provide the same picture quality as other displays.
PIP/PBP
Videos or photos stored on the USB device can be displayed on a single monitor by dividing them
into the main and subscreens.
Option
Mode
Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Position
Adjusts the position of the subscreen (top left, bottom left, top right, bottom
right) The default value is inthe bottom right.
Size
Adjusts the size of the subscreen (Size 0-10). The default size of the PIP (Size:
0) is 480x240; the maximum size (Size: 10) is 960x540.
NOTE
yyThe Position and Size options are enabled only in PIP mode.
ENG
ENGLISH
Tile Mode
43
44
CUSTOMIZING SETTINGS
Setting
Description
Key input does not work. This prevents invalid key input.
Product/Service
Info.
Displays the model name, software version, serial number, IP address, MAC address and home
page.
Portrait mode
Rotate OSD clockwise (90°,270°)
Option
Rotate OSD clockwise 90°.
270°
Rotate OSD clockwise 270°.
Speaker
Digital Audio Out
Sound Mode
Balance
Move
Clear Voice II
Clear Voice II
Balance
Sound Mode
AUDIO
Digital Audio Out
Speaker
Move
OK
90°
AUDIO
ENGLISH
ENG
Key Lock
OK
90°
270°
CUSTOMIZING SETTINGS
Tile Mode
Tile Mode - Natural mode
Off
When the Tile Mode
option is disabled
When active, the part of the image that would
normally be displayed in the gap between the
monitors is omitted.
1X2
When using 2 monitors
Before
ID 2
ID 1
Tile ID
3X3
When using 9 monitors
2X2
When using 4 monitors
ID 2
ID 3
ID 4
ID 2
ID 3
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
ID 1
4X4
When using 16 monitors
ID 1
ID 2
ID 3
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
ID 10
ID 11
ID 12
ID 13
ID 14
ID 15
ID 16
5X5
When using 25 monitors
ID 1
ID 2
ID 3
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
ID 10
ID 11
ID 12
ID 13
ID 14
ID 15
ID 16
ID 17
ID 18
ID 19
ID 20
ID 21
ID 22
ID 23
ID 24
ID 25
After
ENG
ENGLISH
This monitor can be tiled with additional monitors
to create a large tiled display.
ID 1
45
46
CUSTOMIZING SETTINGS
PIP/PBP
ENGLISH
ENG
Displays videos or photos stored in the USB device
on a single monitor by dividing it into the main and
sub screens. (See p.34)
NOTE
yyThe subscreen is only supported when using the
USB device.
Sub
USB
Mode
*PIP(Picture In Picture): Displays the Sub screen
in the main screen.
*PBP(Picture By Picture): Displays the Sub
screen next to the main screen.
Sub
screen
Main
screen
PIP
PBP
Position
Adjusts the position of the subscreen (top left,
bottom left, top right, bottom right)
top left
top right
bottom left
bottom right
Size
Adjusts the size of the subscreen (Size 0-10).
PBP
960x1080
10 : 960x540
PIP
0:
480x270
< 1920x1080 >
Main
Component
O
RGB
O
HDMI/DVI-D/Display Port
O
AV
X
yyYou can only change the size and position in PIP
mode.
yyWith PBP selected, the Aspect Ratio option in the
PICTURE menu is disabled (Fixed as 16:9).
yyWhile running the PBP function, the Tile Mode function
does not work.
yyYou must select the output sound before running
the PIP or PBP functions. (Select either Main or
Sub.)
yyIf you fail to select Main or Sub from the sound
selection box, and if the OSD disappears after
either a period of time or when the Exit or Back
key is pressed, the PIP/PBP subscreen is not
activated.
yyYou cannot change the sound while running the
PIP or PBP functions. If you want to change the
sound, please restart PIP/PBP.
yyThe picture quality of the subscreen is set
according to the values selected in the main menu,
not the USB device.
yyEven when the power is turned off or on, if the
USB device is connected, the PIP/PBP mode plays
again from where it left off.
yyIf you play videos you selected in PIP/PBP mode,
the videos will play back repeately in succession.
yyThe buttons below work in PIP mode.
Button
Photo
Movie
CUSTOMIZING SETTINGS
NETWORK settings
NETWORK
Move
1 Press MENU to access the main menus.
Network Setting
2 Press the Navigation buttons to scroll to NETWORK and
press OK.
Network Status
Server IP Setting
Server IP Status
3 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Player Name
Sets the player name used in SuperSign Manager.(Up to 20 characters)
Network Setting
Configure the network settings.
Network Status
Display the network status.
- Internet is connected : Extermally connected
- Home network is connected : Only internally connected
- Not connected : When there is no network connection
Server IP Setting
Sets the IP address of the computer (server) on which SuperSign Manager is installed.
Server IP Status
Displays the connection status with the server.
- Not connected : When there is no network connection with SuperSign server
- Waiting for approval : When network connection with SuperSign server has been made, but
access to server has not been approved by the server
- Rejected : When network connection with SuperSign server has been made, but access to
server has been rejected by the server
- Internet is connected : When network connection with SuperSign server has been made and
access to server has also been approved by the server
CAUTION
When setting the Player Name, input delay may occur if you press the buttons on the remote control
yy
continuously.
OK
ENG
ENGLISH
Player Name
47
48
MAKING CONNECTIONS
MAKING CONNECTIONS
ENGLISH
ENG
Connect various external devices to the ports on the Monitor’s back panel.
1 Find an external device you want to connect to your Monitor shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
HD Receiver
HDMI - See p.49
Component - See p.49
AV(CVBS) - See p.50
DVD
HDMI - See p.49
Component - See p.49
AV(CVBS) - See p.50
Speaker
VCR
AV(CVBS) - See p.50
Component - See p.49
USB
Memory storage – See p.21
PC
RGB - See p.12
DVI-D - See p.12
HDMI - See p.13
Display Port - See p.13
LAN - See p.51
Camcorder/Camera
HDMI - See p.49
Component - See p.49
AV(CVBS) - See p.50
Gaming device
HDMI - See p.49
Component - See p.49
AV(CVBS) - See p.50
NOTE
If you connect a gaming device to the Monitor, use the cable supplied with the gaming device.
yy
MAKING CONNECTIONS
Connect a HD receiver, DVD, or VCR player to the
Monitor and select an appropriate input mode.
Component connection
Transmits the analog video and audio signals
from an external device to the Monitor. Connect
the external device and the Monitor with the 15
pin signal to RCA cable as shown on the following
illustration. To display images by using progressive
scan, make sure to use the component cable.
HDMI connection
Transmits the digital video and audio signals from
an external device to the Monitor. Connect the
external device and the Monitor with the HDMI
cable as shown on the following illustration.
AUDIO OUT
(not included)
NOTE
Use a High Speed HDMI™ Cable.
yy
High Speed HDMI™ Cables are tested to
yy
carry an HD signal up to 1080p and higher.
VIDEO
(not included)
HDMI
(not included)
ENG
ENGLISH
Connecting to a HD receiver,
DVD, Camcorder, Camera,
Gaming Device or VCR player
49
50
MAKING CONNECTIONS
ENGLISH
ENG
AV(CVBS) connection
Connecting to a USB
Transmits the analog video and audio signals
from an external device to the Monitor. Connect
the external device and the Monitor with the 15
pin signal to RCA cable as shown on the following
illustration.
Connect a USB storage device such as s USB
flash memory, external hard drive, MP3 player or
a USB memory card reader to the Monitor and
access the USB menu to use various multimedia
files.
or
(not included)
VIDEO
OUT
(not included)
AUDIO
OUT
MAKING CONNECTIONS
Connecting to the LAN
LAN
PC
B Using a router(Switch)
Monitor
Switch
Network
PC
C Using the Internet.Network
LAN
Network
Monitor
PC
ENG
ENGLISH
A Connect PC to Monitor directly.
LAN
NOTE
Using LAN establishes communication
yy
between your PC and the monitor and
enables to use the OSD menus on the PC as
well as on the monitor.
LAN connection
Monitor
51
52
MAKING CONNECTIONS
Daisy Chain Monitors
Monitor 1
Monitor 2
Monitor 3
Monitor 4
15-pin D-Sub Signal Cable
(Max 3m)
VIDEO
RGB
Mode
Component
Mode
AUDIO
OUT
RGB OUT (PC)
VIDEO
OUT
ENGLISH
ENG
Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
To use different products connected to each other Connect one end of the signal input cable (15-pin D-Sub
Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector
of other products
AV(CVBS)
Mode
NOTE
The number of monitors that can be connected to one output may vary depending on signal status
yy
and cable loss. If the signal status is good, and there is no cable loss, it is possible to connect up to
9 monitors. If you want to connect more than this number of monitors, it is recommended to use a
distributor.
When multi-connecting in/out cascade format, no loss cables are recommended.
yy
TROUBLESHOOTING
53
No image is displayed
Problem
Resolution
Is the product power cord
connected?
yy See if the power cord is properly connected to the outlet.
Is the power indicator light on?
yy See if the power switch is turned on.
yy May need service.
yy Adjust brightness and contrast again.
yy Backlight may need repair.
ower is on, power indicator
P
is red but the screen appears
extremely dark.
The power indicator amber?
oes the 'Out of range'
D
message appear?
oes the 'Check signal cable'
D
message appear?
yy If the product is in power saving mode, move the mouse or press any
key.
yy Turn both devices off and then back on.
yy The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB, HDMI, DVI-D, Display Port : 1920 x 1080 @ 60 Hz
yy The signal cable between PC and product is not connected. Check
the signal cable.
yy Press the 'INPUT' menu in the remote Control to check the input
signal.
'Unknown Product' message appears when the product is connected.
Problem
Did you install the driver?
Resolution
yy Install the product driver, which is provided with the product, or
download it from the web site. (http://www.lg.com)
yy See if the plug&play function is supported by referring to the video
card user manual.
ENG
ENGLISH
TROUBLESHOOTING
54
TROUBLESHOOTING
ENGLISH
ENG
'Key Lock On' message appears.
Problem
The 'Key Lock On' message
appears when pressing the
Menu button.
Resolution
The Lock function prevents the OSD settings from being changed
inadvertently. To release the lock, go to Menu and Option and disable
the Key Lock option.
The screen image looks abnormal.
Problem
Resolution
Is the screen position wrong?
yy D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Position OSD
menu.
yy See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
Do thin lines appear on the
yy D-Sub analog signal - Press the "AUTO" button in the remote control
background screen?
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Clock OSD
menu.
Horizontal noise appears or the yy D-Sub analog signal - Press the "AUTO" button in the remote control
characters look blurred.
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Phase OSD
menu.
The screen is displayed
yy The proper input signal is not connected to the signal port. Connect
abnormally.
the signal cable that matches with the source input signal.
After-image appears on the product.
Problem
After-image appears when the
product is turned off.
Resolution
yy If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
TROUBLESHOOTING
55
The audio function does not work.
No sound?
Resolution
Sound is too dull.
yy See if the audio cable is connected properly.
yy Adjust the volume.
yy See if the sound is set properly.
yy Adjust the Clear Voice ll, Treble and Bass appropriately.
Sound is too low.
yy Adjust the volume.
Screen color is abnormal.
Problem
Resolution
Screen has poor color resolution yy Set the number of colors to more than 24 bits (true color) Select
(16 colors).
Control Panel - Display - Settings - Color Table menu in Windows.
creen color is unstable or
S
mono-colored.
yy Check the connection status of the signal cable. Or, re-insert the PC
video card.
Do black spots appear on the
screen?
yy Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
The power suddenly turned off.
Resolution
yy Is the sleep timer set?
yy Check the power control settings. Power interrupted
ENG
ENGLISH
Problem
56
SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
LCD Panel
Screen Type
Video Signal
Pixel Pitch
Max. Resolution
1830.616 mm Wide (72 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1830.616 mm
0.831 mm (H) x 0.831 mm (V)
RGB : 1920 X 1080 @60 Hz
HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB : 1920 X 1080 @60 Hz
HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
Input Connector
Power
Rated Voltage
Power Consumption
Environmental
conditions
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
RGB : 30 kHz to 83 kHz
HDMI,DVI-D, Display Port : 30 kHz to 83 kHz
RGB : 56 Hz to 75 Hz
HDMI,DVI-D, Display Port : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
15-pin D-Sub, HDMI, DVI-D, Display Port, RS-232C, LAN,
USB, Audio
100-240 V~ 50/60 Hz 5.7 A
On Mode : 500 W Typ.
Sleep Mode (RGB) : ≤ 1 W
Sleep Mode (HDMI, DVI-D, Display Port)
: ≤ 1 W (Set Only) / ≤ 2 W (With External Device)
Off Mode : ≤ 0.5 W
0 °C to 40 °C
10 % to 80 %
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
ENG
ENGLISH
Dimensions
(Width x Height x
Depth) / Weight
1677.4 mm x 979.4 mm x 100.7 mm / 57.0 kg
* Applicable only for models that support the speakers
Audio
57
RMS Audio Output
Input Sensitivity
Speaker Impedance
10 W + 10 W (R + L)
0.7 Vrms
8Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
58
SPECIFICATIONS
Dimensions
(Unit : mm)
4331:
49::17
6;1:
<319
<:<17
;<:18#+Dfwlyh#Duhd,
6;1:
48<818#+Dfwlyh#Duhd,
6;1:
6;1:
5;<1:
59415
86;1:
933
70P9#+Zdoo#Prxqw,
733
533
ENGLISH
ENG
The illustrations in this manual may differ from the actual product and accessories.
Please see the "Mounting on a wall" section for sizes of screws. ( See p.8 )
5615
4964
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
59
DTV Mode
RGB (PC) supported mode
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
Resolution
Component
HDMI,Display
Port (DTV)
640 x 350
31.469
70.8
480i
o
x
o
o
720 x 400
31.468
70.8
480p
640 x 480
31.469
59.94
576i
o
x
640 x 480
37.5
75
576p
o
o
800 x 600
37.879
60.317
720p
o
o
800 x 600
46.875
75
1080i
o
o
832 x 624
49.725
74.55
1080p
o
o
1024 x 768
48.363
60
1024 x 768
60.123
75.029
1280 x 720
44.772
59.855
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1280 x 1024
79.98
75.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
Power Indicator
Mode
Product
On Mode
Sleep Mode
Off Mode
Red
Amber
-
NOTE
HDMI,DVI-D,Display Port (PC) supported mode
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
640 x 480
31.469
59.94
800 x 600
37.879
60.317
1024 x 768
48.363
60
1280 x 720
44.772
59.855
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
When the cable is connected to the HDMI or
yy
the display port, you can select the PC/DTV
mode optionally. It is recommended you to
set to the PC mode when connecting to PC;
the DTV mode when connecting to DTV.
NOTE
Vertical frequency: To enable the user to
yy
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
Horizontal frequency: The horizontal interval
yy
is the time to display one vertical line. When
1 is divided by the horizontal interval, the
number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
ENG
ENGLISH
Resolution
60
IR CODES
IR CODES
ENGLISH
ENG
Code (Hexa)
Function
Note
95
R/C BUTTON
08
R/C BUTTON
ON/OFF
0B
R/C BUTTON
C4
R/C BUTTON
(Discrete IR Code)
C5
R/C BUTTON
(Discrete IR Code)
43
R/C BUTTON
40
Up
R/C BUTTON
41
Down
R/C BUTTON
07
Left
R/C BUTTON
06
Right
R/C BUTTON
44
R/C BUTTON
28
R/C BUTTON
5B
R/C BUTTON
4D
R/C BUTTON
02
Volume
R/C BUTTON
03
Volume
R/C BUTTON
09
R/C BUTTON
E0
(
UP)
E1
(
Down) R/C BUTTON
to
R/C BUTTON
10 to 19
Number Key
72
Red Key
R/C BUTTON
71
Green Key
R/C BUTTON
63
Yellow Key
R/C BUTTON
61
Blue Key
R/C BUTTON
7B
R/C BUTTON
R/C BUTTON
5A
AV(CVBS)
Discrete IR Code
BF
Component
Discrete IR Code
D5
RGB
Discrete IR Code
CE
Display Port
Discrete IR Code
C6
DVI-D
Discrete IR Code
E9
HDMI
Discrete IR Code
76
(4:3)
Discrete IR Code
77
(16:9)
Discrete IR Code
AF
(ZOOM,Cinema Zoom 1)
Discrete IR Code
79
99
R/C BUTTON
(Discrete IR Code)
Auto Config.
R/C BUTTON
(Discrete IR Code)
B1
R/C BUTTON
B0
R/C BUTTON
BA
R/C BUTTON
8F
R/C BUTTON
8E
R/C BUTTON
CONTROLLING THE MULTIPLE PRODUCT
Use this method to connect several products to a single PC. You can control several products at a
yy
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 99 without being duplicated.
yy
Connecting the cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
yy
product on/off, select an input source or adjust the OSD menu from your PC.
Monitor 1
PC
Monitor 2
Monitor 3
Monitor 4
RS-232C Cable (not included)
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
PC
D-Sub 9
(Female)
Set
D-Sub 9
(Female)
Communication Parameter
Baud Rate : 9600 buad Rate (UART)
yy
Data Length : 8 bit
yy
Parity Bit : None
yy
Stop Bit : 1bit
yy
Flow Control : None
yy
Communication Code : ASCII code
yy
Use a crossed (reverse) cable
yy
3-Wire Configurations (Not Standard)
PC
D-Sub 9
(Female)
Set
D-Sub 9
(Female)
ENG
ENGLISH
CONTROLLING THE MULTIPLE PRODUCT
61
62
CONTROLLING THE MULTIPLE PRODUCT
Command reference list
ENGLISH
ENG
COMMAND
1
Power
k
2
Aspect Ratio
3
Screen Mute
4
DATA
a
00H to 01H
k
c
01H to 1FH
k
d
00H to 01H
Volume Mute
k
e
00H to 01H
5
Volume Control
k
f
00H to 64H
6
Contrast
k
g
00H to 64H
7
Brightness
k
h
00H to 64H
8
Color
k
i
00H to 64H
9
Tint
k
j
00H to 64H
10 Sharpness
k
k
00H to 64H
11 OSD Select
k
l
00H to 01H
12 Remote Lock/ key Lock
k
m
00H to 01H
13 Treble
k
r
00H to 64H
14 Bass
k
s
00H to 64H
15 Audio Balance
k
t
00H to 64H
16 Abnomal state
k
z
FFH
17 White Balance Red Gain
j
m
00H to FEH
18 White Balance Green Gain
j
n
00H to FEH
19 White Balance Blue Gain
j
o
00H to FEH
20 ISM mode
j
p
01H to 08H
21 Energy Saving
j
q
00H to 05H
22 Auto configuration
j
u
01H
23 Remocon Key
m
c
Key Code
24 Fail Over Select
m
i
00H to 02H
25 Fail Over Input Select
m
j
Refer ’25. Fail Over Input Select’
26 4 Hours Off
m
n
00H to 01H
27 Tile Mode Check
d
z
FFH
28 Tile Mode
d
d
00H to 55H
29 Tile H Position
d
e
00H to 14H
30 Tile V Position
d
f
00H to 14H
31 Tile H Size
d
g
00H to 64H
32 Tile V Size
d
h
00H to 64H
33 Tile ID Set
d
i
01H to 19H
34 Natural Mode (In Tile mode)
d
j
00H to 01H
35 Picture mode (PSM)
d
x
00H to 04H
36 Sound mode
d
y
00H to 05H
37 Fan Fault check
d
w
FFH
38 Elapsed time return
d
l
FFH
39 Temperature value
d
n
FFH
40 Lamp fault check
d
p
FFH
41 Speaker
d
v
00H to 01H
42 Sleep Time
f
f
00H to 08H
CONTROLLING THE MULTIPLE PRODUCT
COMMAND
63
DATA
f
g
00H to 01H
44 Power On Delay
f
h
00H to 64H
45 Language
f
i
00H to 12H
46 DPM Select
f
j
00H to 01H
47 Reset
f
k
00H to 03H
48 Power Indicator
f
o
00H to 01H
49 Serial no.
f
y
FFH
50 S / W Version
f
z
FFH
51 Time 1(Years/ Months/ Days)
f
a
Refer to ‘Time 1’
52 Time 2(Hours/ Minutes/Seconds)
f
x
Refer to ‘Time 2’
53 Off Timer(Repeat mode/ Time)
f
e
Refer to ‘Off Timer’
54 On Timer(Repeat Mode/ Time)
f
d
Refer to ‘On Timer’
55 On Timer Input
f
u
Refer to ‘On Timer Input’
56 H Position
f
q
00H to 64H
57 V Position
f
r
23H to 41H
58 H Size
f
s
00H to 64H
59 Input Select
x
b
20H to D0H
60 Color Temperature
x
u
00H to 64H
Note : When using the product with a USB DivX player, all commands except for Power (k a), Key (m c),
yy
Abnormal state (k z), Fan Fault check (d w), Elapsed time return (d l), Temperature value (d n), Lamp
fault Check (d p), Serial no.Check (f y), and S/W Version (f z) are not executed and handled as errors.
ENG
ENGLISH
43 Auto Sleep
64
CONTROLLING THE MULTIPLE PRODUCT
Transmission / Receiving protocol
ENGLISH
ENG
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command. (k, j, m, d, f, x)
* [Command 2]: Second command.(a to u)
* [Set ID]: Set up the Set ID number of product.
range : 01H to 63H. by setting '0', server can control all products.
* In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be checked the ack
message. Because all sets will send the ack message, so it's impossible the check the whole ack messages.
* [DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
* [Cr]: Carriage Return (ASCII code '0 x 0 D')
* [ ]: ASCII code Space (0 x 20)
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of
the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* If there is error, it returns NG
CONTROLLING THE MULTIPLE PRODUCT
* Real data mapping
Decimal Num.
(Real Value)
0
0
A
F
10
20
64
10
15
16
32
100
03. Screen Mute (Command: k d)
To select screen mute on / off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data
00: Screen mute off (Picture on)
01 : Screen mute on (Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
01. Power (Command: k a)
To control Power On/Off of the set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data
00 : Power Off
01 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
To show the status of Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Data
00 : Power Off
01 : Power On
04. Volume Mute (Command: k e)
To control On/Off of the Volume Mute.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data
00 : Volume Mute On (Volume Off)
01 : Volume Mute Off (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data
00 : Volume Mute On (Volume Off)
01 : Volume Mute Off (Volume On)
02. Aspect Ratio (Command: k c)
To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in
the Screen menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data
01 : Normal Screen (4 : 3)
02 : Wide Scran (16 : 9)
04 : Zoom
(AV,Component,HDMI/Display Port DTV)
09 : Just Scan
(Component,HDMI/Display Port DTV)
* When the RGB, DVI-D, HDMI/ Display Port PC
mode (1:1)
10 to 1F : Cinema Zoom 1 to 16
( AV, Component, HDMI/Display Port DTV)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
05. Volume Control (Command: k f)
To adjust Volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H to Max : 64H
ENG
ENGLISH
Hexadecimal Num.
(Setting Value)
65
66
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
06. Contrast (Command: k g)
To adjust screen contrast.
You can also adjust the contrast in the Picture menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H to Max : 64H
* Refer to 'Real data mapping ’.
07. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust the brightness in the Picture
menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping ’.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
* Refer to 'Real data mapping ’.
09. Tint (Command: k j)
To adjust the screen tint.
You can also adjust the tint in the Picture menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step R50
64H : Step G50
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
* Tint Real data mapping
0 : Step 0 to Red
64 : Step 100 to Green
10. Sharpness (Command: k k) (Video input only)
To adjust the screen Sharpness.
You can also adjust the sharpness in the Picture
menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping ’.
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H to Max : 64H
08. Color (Command: k i) (Video Timing only)
To adjust the screen color.
You can also adjust the color in the Picture menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping ’.
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H to Max : 64H
11. OSD Select (Command: k l)
To control OSD on/off to the set.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data
00: OSD Off
01: OSD On
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data
00: OSD Off
01: OSD On
CONTROLLING THE MULTIPLE PRODUCT
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data
00: Off
01: On
15. Balance (Command: k t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step L50
64H : Step R50
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step 0 to L50
64H : Step 100 to R50
* Balance : L50 to R50
13. Treble (Command: k r)
To adjust treble.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data
00~64: Treble 0~100
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
16. Abnormal state (Command: k z)
Used to Read the power off status when Stand-by
mode.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data
FF : Read
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
14. Bass (Command: k s)
To adjust bass.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data
00~64: Bass 0~100
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
Data
00 : Normal (Power on and signal exist)
01 : No signal (Power on)
02 : Turn the monitor off by remote control
03 : Turn the monitor off by sleep time function
04 : Turn the monitor off by RS-232C function
08 : Turn the monitor off by off time function
09 : Turn the monitor off by auto off function
ENG
ENGLISH
12. Remote Lock /Key Lock (Command: k m)
To control Remote Lock on/off to the set.
This function, when controlling RS-232C, locks the
remote control and the local keys.
67
68
CONTROLLING THE MULTIPLE PRODUCT
17. White Balance Red Gain (Command: j m)
To adjust white balance red gain.
ENGLISH
ENG
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data
00~FE: Red gain 0~254
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
20. ISM mode (Command: j p)
Used to select the afterimage preventing function.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data
01 : Inversion
02 : Orbiter
04 : White Wash
08 : Normal
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
18. White Balance Green Gain (Command: j n)
To adjust white balance green gain.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data
00~FE: Green gain 0~254
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
21. Energy Saving (Command: j q)
To reduce the power consumption of the Monitor.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
04: Auto
00: Off
01: Minimum
02: Medium
03: Maximum
05: Screen off
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
19. White Balance Blue Gain (Command: j o)
To adjust white balance blue gain.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data
00~FE: Blue gain 0~25
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
22. Auto Config. (Command: j u)
To adjust picture position and minimize image
shaking. Automatically. NB : Only applies to RGB(PC)
mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data
01 : To set
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
26. 4 Hours Off (Command: m n)
To set the 4 Hours Off function.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data
Key code : Refer to ‘IR CODES’.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
Data
00: 4 Hours Off Off
01: 4 Hours Off On
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
24. Fail Over Select (Command: m i)
To select Fail Over mode.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
27. Tile Mode Check (Command: d z)
To check Tile Mode status.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data
FF: Check Tile Mode status
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
00: Tile Mode Off
01: Tile Mode On
Data2
00 to 0F: Tile Col Value
Data3
00 to 0F: Tile Row Value
25. Fail Over Input Select (Command: m j)
To select fail over mode.
* Only available in Fail Over manual mode.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3]
[ ][Data4][Cr]
Data(Priority 1~4)
60: RGB
70: DVI-D
90: HDMI
C0: Display Port
* Use 0x70 as data for DVI-D input, 0x90 as data
for HDMI input, 0xC0 as data for DisplayPort input,
regardless their input labels.
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
ENG
ENGLISH
23. Key (Command: m c)
To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
69
70
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
28. Tile Mode (Command: d d)
Change a Tile Mode.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data
Description
00 or 11
12
13
14
Tile mode is off.
1 x 2 mode (column x row)
1 x 3 mode
1 x 4 mode
...
1 x 2 mode
...
55
31. Tile H Size (Command: d g)
To set the Horizontal size.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
* Refer to 'Real data mapping ’.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
* The data can not be set to 0X or X0 except 00.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
29. Tile H Position (Command: d e)
To set the Horizontal position.
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
32. Tile V Size (Command: d h)
To set the Vertical size.
Transmission
[d][h][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 14H
00H : Step -10(Left)
14H : Step 10(Right)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
Data
Min : 00H to Max : 64H
* Refer to 'Real data mapping ’.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
30. Tile V Position (Command: d f)
To set the Vertical position.
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
33. Tile ID Set (Command: d i)
To assign the Tile ID for Tiling function.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 14H
00H : Step -10(Down)
14H : Step 10(Up)
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
Data
Min : 01H to Max : 19H
(Hexadecimal code)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
37. Fan Fault check (Command: d w)
To check the Fan fault of the Set.
Transmission
[d][w][ ][Set ID][ ][Data][Cr]
Data
00 : Natural Off
01 : Natural On
ff : Read Status
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
* The data is always FF (in Hex).
Data
ff : Read Status
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
35. Picture Mode (Command: d x)
To adjust the picture mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data Structure
38. Elapsed time return (Command: d l)
To read the elapsed time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data(Hex)
Mode
00
01
02
03
04
Vivid
Standard
Cinema
Sport
Game
* Data is the status value of the Fan fault.
Data
00 : Fan fault
01 : Fan Ok
02 : N/A (Not Avaliable)
* The data is always FF(in Hex).
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* The data is always FF(in Hex).
(Hexadecimal code)
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
36. Sound Mode (Command: d y)
To adjust the Sound mode.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
Data Structure
Data(Hex)
Mode
01
02
03
04
05
Standard
Music
Cinema
Sport
Game
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
39. Temperature value (Command: d n)
To read the inside temperature value.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
* The data is always FF(in Hex).
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* The data is 1 byte long in Hexadecimal.
ENG
ENGLISH
34. Natural Mode (Command: d j)
To assign the Tile Natural mode for Tiling function.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
71
72
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
40. Lamp fault Check (Command: d p)
To check lamp fault.
Transmission
[d][p][ ][Set ID][ ][Data][Cr]
43. Auto Sleep (Command: f g)
Set Auto Sleep.
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
* The data is always FF(in Hex).
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
Data
00 : Off
01 : On
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
* The data is 1 byte long in Hexadecimal.
Data
00 : Lamp Fault
01 : Lamp Ok
02 : N/A (DPM/Power Off)
41. Speaker (Command: d v)
Turn the speaker on or off.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
42. Sleep Time (Command: f f)
Set Sleep Time.
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
Data
00 : Off
01 : 10
02 : 20
03 : 30
04 : 60
05 : 90
06 : 120
07 : 180
08 : 240
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
44. Power On Delay (Command: f h)
Set the schedule delay when the power is turned on
(Unit: second).
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data
00H to 64H (Data value)
* Refer to 'Real data mapping ’.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE PRODUCT
Data
00 : Czech
01 : Danish
02 : German
03 : English
04 : Spanish (EU)
05 : Greek
06 : French
07 : Italian
08 : Dutch
09 : Norwegian
0a : Portuguese(EU)
0b : Portuguese(Brazil)
0c : Russian
0d : Finnish
0e : Swedish
0f : Korean
10 : Simplified Chinese
11 : Japanese
12 : Traditional Chinese
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
47. Reset (Command: f k)
Execute the Picture, Screen and Factory Reset
functions.
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data
00 : Picture Reset
(Reset the values set in the PICTURE menu.)
01 : Screen Reset
(Reset the values set in under the Screen option.)
02 : Factory Reset
(Reset the values set in the OPTION menu.)
03 : Audio Reset
(Reset the values set in the AUDIO menu.)
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
48. Power Indicator (Command: f o)
To set the LED for Power Indicator
Transmission
[f][o][ ][Set ID][ ][Data][Cr]
Data
00 : Off
01 : On
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
46. DPM Select (Command: f j)
Set the DPM (Display Power Management) function.
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
49. Serial no.Check (Command: f y)
Check the Serial no.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data
00 : Off
01 : On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
Data
FF (to read the serial numbers)
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data1] to [Data13][x]
* The data format is ASCII Code.
ENG
ENGLISH
45. Language (Command: f i)
Set the OSD language.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
73
74
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
50. S/W Version (Command: f z)
Check the software version.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
52. Time 2(Hour/ Minute/ Second) (Command: f x)
To set the Time 2(Hour/ Minute/ Second) values.
Transmission
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data
FFH : Read
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
Data1
00 to 17: 00 to 23 hours
Data2
00 to 3B: 00 to 59 minutes
Data3
00 to 3B: 00 to 59 seconds
* Enter “fx [Set ID] ff” for checking Time 2 values.
** This command won’t work if Time 1 has not been
set in advance.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
51. Time 1(Year/ Month/ Day) (Command: f a)
To set the Time 1(Year/ Month/ Day) values.
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
53. Off Timer(Repeat Mode/ Time) (Command: f e)
To set the Off Timer(Repeat mode/ Time) function.
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 1
00 to 14: 2010 to 2030
Data 2
01 to 0C: January to December
Data 3
01 to 1F: 1 to 31
* Enter “fa [Set ID] ff” for checking Time 1 values.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
Data2
00 to 17: 00 to 23 Hours
Data3
00 to 3B: 00 to 59 Minutes
* Enter “fe [Set ID] ff” for checking Off Timer(Repeat
mode/ Time) values.
* Check if Time1 and Time2 have been set before
setting this function.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
CONTROLLING THE MULTIPLE PRODUCT
Data1
00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
Data2
00 to 17: 00 to 23 Hours
Data3
00 to 3B: 00 to 59 Minutes
* Enter “fd [Set ID] ff” for checking On Timer(Repeat
mode/ Time) values.
* Check if Time1 and Time2 have been set before
setting this function.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
55. On Timer Input (Command: f u)
To set the On Timer Input function.
Transmission
[f][u][ ][Set ID][ ][Data][Cr]
56. H Position (Command: f q)
To set the Horizontal position.
* Only available for Tile Off mode.
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data
00~64: Left 50 ~ Right 50
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
57. V Position (Command: f r)
To set the Vertical position.
* Only available for Tile Off mode.
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
Data
23~41: Bottom 15~Top 15
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
Data
20 : AV
40 : Component
60 : RGB
70 : DVI-D
90 : HDMI
C0 : Display Port
* Check if Time1 and Time2 and On Timer(Repeat
Mode/Time) functions have been set before setting
this function.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
58. H Size (Command: f s)
To set the Horizontal size.
* Only available for Tile Off mode.
Transmission
[f][s][ ][Set ID][ ][Data][Cr]
Data
00~64: Size -50 ~ +50
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
54. On Timer(Repeat Mode/ Time) (Command: f d)
To set the On Timer(Repeat mode/ Time) function.
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
75
76
CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
ENG
59. Input Select (Command: x b)
To select input source for the Set.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data
20: AV(CVBS)
40: Component
60: RGB(PC)
70: DVI-D
90: HDMI(DTV)
A0: HDMI(PC)
C0: Display Port(DTV)
D0: Display Port(PC)
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
60. Color Temperature (Command: x u)
To adjust the screen color temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data
00~64: Warm 50~Cool 50
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
To obtain the source code under GPL, LGPL,
MPL and other open source licenses, that is
contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping and handling)
upon email request to opensource@lge.com.
This offer is valid for three (3) years from the
date on which you purchased the product.
Important
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
WARRANTY VOID
IF REMOVED
3850TAZ209Y
Warranty void if removed.
WARNING -This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be required
to take adequate measures.
Temporary noise is normal when powering ON or
OFF this device.
Download PDF
Similar pages