Installation_Guide_Premier_Series_C update warranty 2017

INSTALLATION GUIDE
Kraus Stainless Steel
Undermount Kitchen Sink
KBU10 / KBU11 / KBU12 / KBU14 / KBU15/ KBU16 /
KBU17 / KBU21 / KBU22 / KBU23 / KBU24 / KBU25
/ KBU26 / KBU27 / KBU28 / KBU29
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. January 11, 2018
Congratulations on the purchase of your new
Kraus plumbing fixture!
Please keep teh box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
1
Prior to Installation:
•
Make sure that you have all necessary parts by checking the parts list. If any part is
missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a
replacement
•
Inspect the sink prior to installation to make sure that it has not been damaged or
during shipping
•
Use the cut-out template provided by Kraus
•
Observe all plumbing and building codes according to your state requirements
•
Not recommended to be installed with laminate countertop
Parts List
• Cut-Out Template
• Mounting Hardware
• Bottom Grids
• Drain
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or Customerservice@kraususa.com
The step-by-step guidelines in the installation instructions are a general reference for installing
a Kraus Sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended
to install all Kraus products by hiring a licensed professional.
2
J
Adjustable wrench
Phillips screwdriver
Hex wrench
Silicone Sealant
Safety Goggles
Drill
Phillips Screwdriver
Putty Knife
Silicone
Sealant
Silicone Adhesive
Jig Saw
B
Hex wrench
Scissors
Phillips screwdriver
Adjustable wrench
Tape Measure
Pencil
Screwdriver
Tools You Will Need
J
F
Tools you will need:
NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Undermount
sinks with countertop materials other than wood, marble, or granite
I
Dimensions
18 3/4”
23 3/8”
20 3/4”
526mm
584mm
3
KBU11
20 3/4” x 17 3/4” x 9”
Min Cabinet Size: 24”
Matching Grid: KBG-11
Drain Model #: BST-1
9”
230mm
23”
9”
9”
KBU10
23 3/8” x 21” x 9”
Min Cabinet Size: 27”
Matching Grid: KBG-10
Drain Model #: BST-1
KBU12
23” x 17 1/2” x 9”
Min Cabinet Size: 27”
Matching Grid: KBG-12
Drain Model #: BST-1
445mm
403mm
534mm
230mm
594mm
21”
476mm
229mm
542mm
17 1/2”
21”
21 5/16”
15 14/16”
400mm
15 3/4”
×
535mm
478mm
18 13/16”
×
450mm
D
×
17 3/4”
×
Dimensions
750mm
13”
17 3/4”
31 1/2”
330mm
450mm
800mm
15”
19 3/4”
381mm
179mm
7”
10”
9”
255mm
229mm
500mm
KBU14
31 1/2” x 18 3/8” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-14
Drain Model #: BST-1
KBU15
19 3/4” x 20 1/2” x 9”
Min Cabinet Size: 24”
Matching Grid: KBG-15
Drain Model #: BST-1
×
470mm
419mm
29 1/2”
18 1/2
520mm
470mm
18 1/2”
16 1/2”
×
467mm
413mm
×
18 3/8”
16 1/4”
×
20 1/2”
×
KBU16
15” x 18 1/2” x 7”
Min Cabinet Size: 18”
Drain Model #: ST-1
×
×
×
U17
U17
KBU22
13 1/8”
332mm
13
1/8”
332mm
15
1/8”
382mm
15
1/8”
420mm
254mm
32 1/4”
820mm
32 1/4”
18”18”
14 1/2”
368mm
14 1/2”
368mm
178mm
KBU21
29 1/8” x 19 1/2” x 9”
Min Cabinet Size: 33”
Matching Grid: KBG-21-1
and KBG-21-2
Drain Model #: BST-1 & ST-1
218mm
218mm
8 1/2”
8 1/2”
7”
228mm
9”
7” 7”
179mm
179mm
820mm
KBU17
15 1/8” x 12 3/4” x 7”
Min Cabinet Size: 18”
Drain Model #: ST-1
457mm
457mm
409mm
409mm
368mm
748mm
382mm
16 1/8”
16 1/8”
14 1/2”
368mm
14 1/2”
10”
29 1/8”
403mm
14”
356mm
16 1/2”
15 7/8”
446mm
17 1/2”
495mm
19 1/2”
324mm
324mm
274mm
274mm
12 3/4”
12 3/4”
10 3/4”
10 3/4”
KBU22
KBU22
32 1/4” x 18” x 8 1/2”
Min Cabinet Size: 36”
Matching Grid: KBG-22-1
and KBG-22-2
Drain Model #: BST-1 & ST-1
4
KBU23
KBU23
Dimensions
KBU24
18”
400mm
456mm
15 3/4”
400mm
355mm
8”
203mm
8”
203mm
796mm
KBU29
31 3/8” x 18” x 8”
Min Cabinet Size: 36”
Matching Grid: KBG-29-1 and KBG-29-2
Drain Model #: BST-1 & ST-1
5
521mm
521mm
20 1/2”
18 1/2”
471mm
20 1/2”
471mm
18 1/2”
449mm
449mm
391mm
391mm
15 3/8”
15 3/8”
17 3/4”
17 3/4”
9”
229mm
9”
229mm
187mm 187mm
7 3/8” 7 3/8”
181mm
181mm
9”
228mm
470mm
981mm
KBU28
38 5/8” x 20 1/2” x 9”
Min Cabinet Size: 42”
Matching Grid: KBG-28-1
and KBG-28-2
Drain Model #: BST-1 & ST-1
521mm
18 1/2”
470mm
521mm
20 1/2”
450mm
400mm
15 3/4”
18 1/2”
450mm
38 5/8”
190mm
9”
228mm
190mm
7 1/2”
9”
228mm
18”
456mm
15 3/4”
31 3/8”
17 7/10”
450mm
340mm
KBU27
34 3/8” x 20 1/2” x 9”
Min Cabinet Size: 39”
Matching Grid: KBG-27-1
and KBG-27-2
Drain Model #: BST-1 & ST-1
14”
14”
34 3/8”
872mm
KBU26
30 3/4” x 19 1/2” x 9”
Min Cabinet Size: 36”
Matching Grid: KBG-26-1
and KBG-26-2
Drain Model #: BST-1 & ST-1
355mm
17 3/4”
520mm
450mm
17 7/10”
13 3/8”
17 3/4”
280mm
782mm
7 1/2”
30 3/4”
×
470mm
20 1/2”
418mm
368mm
16 1/2”
11”
420mm
KBU25
32 3/8” x 20 1/2” x 9”
Min Cabinet Size: 36”
Matching Grid: KBG-25-1
and KBG-25-2
Drain Model #: BST-1 & ST-1
×
18 1/2”
×
14 1/2”
16 1/2”
7 1/8”
7 1/8”
9” 9”
7” 7”
9” 9”
495mm
444mm
17 1/2”
19 1/2”
×
×
450mm
822mm
KBU24
32” x 20 5/8” x 9”
Min Cabinet Size: 36”
Matching Grid: KBG-24-1
and KBG-24-2
Drain Model #: BST-1 & ST-1
×
450mm
822mm
32 3/8”
229mm
229mm
178mm
178mm
229mm
229mm
×
290mm
813mm
KBU23
31 1/2” x 20 1/2” x 9”
Min Cabinet Size: 36”
Matching Grid: KBG-23-1
and KBG-23-2
Drain Model #: BST-1 & ST-1
×
330mm
20 1/2”
800mm
32”
813mm
32”
17 3/4”
290mm
11 3/8” 32 3/8” 17 3/4”
9”
400mm
11 3/8”
13”
13”
330mm
228mm
266mm
470mm
470mm
419mm
419mm
15 3/4”
400mm
15 3/4”
10 1/2”
266mm
10
1/2”
18 1/2”
18 1/2”
16 1/2”
16 1/2”
524mm
524mm
473mm
473mm
20 5/8”
20 5/8”
18”18”
16”16”
17 3/4”
450mm
17
3/4”
450mm 311/2”
800mm
311/2”
18 5/8”
18 5/8”
457mm
457mm
406mm
406mm
470mm
470mm
521mm
521mm
1818
1/2”
1/2”
2020
1/2”
1/2”
KBU24
DETERMINE REVEAL TYPE
1. Determine Reveal Type
DETERMINE REVEAL TYPE
tive Reveal
Use scissors to cut along
the line of the paper template
for your desired
DETERMINE
REVEAL
TYPE
reveal type (Negative, Positive, or Flushed Reveal)
3/8“ Positive Reveal
3/8“ Positive Reveal
3/8“ Positive Reveal
Zero Reveal
Flushed/Zero Reveal
Flushed/Zero Reveal
Flushed/Zero Reveal
1/8“ Negative Reveal
ative Reveal
KRAUS Recommended Installation Type
1/8“ Negative Reveal
3/8”POSITIV
3/8”POSITIVE
1/8“ Negative Reveal
3/8”POSITIV
1/8”NEGATI
1/8”NEGATIVE
FLUSHED/ZERO
3/8”POSITIV
1/8”NEGATI
1/8”NEGATI
FLUSHED/ZERO
FLUSHED/ZERO
FLUSHED/ZERO
Centerline
6
Step1
2. Position Template
• Check the cut-out template against the actual sink to ensure a proper
sized cut-out
• Place the cut-out template in the desired location on the countertop
NOTE: Make sure clearance is suitable for backsplash, faucet, and plumbing for the sink
Step2
3. Trace Template
• Trace template on countertop with a pencil
Step6
1/2
3/8
7
4. Cut Countertop
• Cut the opening in the countertop by carefully following the traced line
Step3
Please use the appropriate saw that best fits your countertop
NOTE:
material
8
Determine location for mounting brackets; space
5. Set up Mounting Brackets
3/8”POSITIVE
1/8”NEGATIVE
Centerline
• Turn countertop over and align sink with countertop. Decide location for
mounting brackets
• Mounting holes should be ½” from edge of sink
Step5
Step6
1/2"
(13mm)
Step5
6. Drill Hole in Countertop
3/8
1/2
1/2"
(13mm)
• Drill 3/8” diameter x 1/2” deep hole in the countertop
3/8
9
1/2
7. Install Anchors
Step6
• Insert anchors into drilled holes and lightly tap with a hammer until flush
Step7
8. Secure Sink to Countertop
• Use a bead of silicone (or preferred adhesive) around the rim of the sink.
Check the alignment of the sink to the cutout in the countertop. Place sink
over cutout hole and press firmly
10
9. Attach Mounting Hardware
Step8
• Attach mounting hardware to secure bowl. Remove excess sealant
from inside lip
• Allow sealant to set for 30 – 60 minutes
NOTE:
11
Use acetone or rubbing alcohol to remove any excess sealant
10. Install Plumbing Fixtures
• Connect drain to sink. Connect trap to drain. Connect water supply
connections to faucet according to manufacturer’s instructions
• Run water into sink and check for leaks
Step9
12
Codes / Standards Applicable:
Kitchen Sink Warranty
Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”).
Kraus extends this warranty to the original purchaser for personal household use of the “Kitchen Sink” in its original
location. The warranty is non-transferable.
Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal
usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade
professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or
replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and
is not transferable to a subsequent owner.
Restrictions
This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at
discount outlets, unauthorized dealers, and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard
water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance,
alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using
abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire
brushes, as these will damage and wear down the finish.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions
supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.
This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus
insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not
allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential
damages, and Kraus accepts no liability for such damages.
This warranty does not cover Marine or Outdoor Installation.
This warranty does not cover any free gifts included with purchase.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of
merchantability and fitness for a particular purpose, or compliance with any code.
Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto
Rico shipping charges may apply). International shipping fees are not included.
13
Commercial Warranty
Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial,
and business use.
All incidental or consequential damages are specifically excluded. No additional warranties, express or implied are given,
including but not limited to, any implied warranty of merchantability or fitness for a particular purpose.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long
an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to
date comprehensive warranty, go to www.kraususa.com/warranty
If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com
If you are a plumbing contractor or trade professional please contact a Kraus
Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com
If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide:
1. Proof of purchase.
2. A description of the problem.
Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/maintenance
14
IMPORTANT
Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information
REGISTER TODAY
http://www.kraususa.com/registration
www.kraususa.com
Download PDF
Similar pages