TL-SG3424P Datasheet-2012-Maypdf

Datasheet
TP-LINK
TM
24-Port Gigabit L2 Managed
PoE Switch with 4 Combo SFP Slots
TL-SG3424P
Overview
The TL-SG3424P provides 24 10/100/1000Mbps ports that supports 802.3at/af-compliant
PoE , with a total PoE power supply up to 320W, powerful and flexible enough for users to
deploy wireless access points or IP-based network surveillance cameras. The switch also
comes equipped with 4 combo SFP slots, expanding your network flexibly. In addition, it
provides high performance, enterprise-level QoS, advanced security strategies and rich
layer 2 management features. With all these advanced features, the JetStreamTM Gigabit L2
Managed PoE Switch is an ideal choice for small and medium business networking.
TL-SG3424P has robust security and management features. The IP-MAC-Port-VID Binding
and Access Control List (ACL) functions protect against broadcast storm, ARP and Denialof-Service (DoS) attacks, etc. Quality of Service (QoS, L2 to L4) provides enhanced traffic
management capabilities to move your data smoother and faster. Anymore, the easy-to-use
web management interfaces, along with CLI, SNMP and RMON, mean faster setup and
configuration with less downtime. For workgroup and departments requiring cost-sensitive
Layer 2 Switch and gigabit capability, TP-LINK JetStreamTM Gigabit L2 Managed PoE Switch
TL-SG3424P provides you the ideal access-edge solution.
www.tp-link.com
Copyright © 2012 TP-LINK Technologies Co., Ltd. All rights reserved.
Datasheet
PoE Features
Standard: 802.3at/af compliant with
up to 30W per port
PoE+ Ports: 24 Ports
Power Supply: 320W
PoE Schedule (Time-based Settings)
Layer 2 Features
Link Aggregation Control
Protocol (LACP)
4K VLAN
GVRP (GARP VLAN Registration
Protocol)
STP/RSTP/MSTP
IGMP Snooping
LLDP (LLDP-MED)
Security Strategies
IP-MAC-Port-VID Binding
Access Control List (L2~L4 ACL)
802.1x and RADIUS
Authentication
Support DoS defend
Port Security
SSL and SSH encryptions
Quality of Service
4 priority queues
IEEE 802.1P
DSCP QoS
Management
Web-based GUI
Command Line Interface
SNMP v1/v2c/v3
RMON (1, 2, 3, 9 group)
24 / 7
Global technical support
Details:http://www.tp-link.com/
support/Localesupport.asp
German/Austrian/Swiss users are
not included
www.tp-link.com
TP-LINK JetStreamTM 24-Port Gigabit L2
Managed PoE Switch with 4 Combo SFP Slots
TL-SG3424P
IEEE 802.3at/af-compliant Power over Ethernet
The TL-SG3424P provides 24 10/100/1000Mbps ports that support 802.3at/af-compliant PoE , with a total
PoE power supply up to 320W, powerful and flexible enough for users to deploy wireless access points,
surveillance cameras, IP phones and other PoE supported devices. The switch also comes equipped with 4
combo SFP slots, expanding your network’s flexibility. In addition, it provides high performance,
enterprise-level QoS, advanced security strategies and rich layer 2 management features. With all these
advanced features, the JetStream™ Gigabit L2 Managed PoE+ Switch is an ideal choice for small and
medium business networki ng.
Secure Networking
This JetStreamTM Gigabit L2 Managed PoE Switch provides IP-MAC-Port-VID Binding, Port Security, Storm
control and DHCP Snooping which protect against broadcast storms, ARP attacks, etc. It integrates some
typical DoS attacks to select. You can protect these attacks more easily ever than before. In addition, the
Access Control Lists (ACL, L2 to L4) feature restricts access to sensitive network resources by denying
packets based on source and destination MAC address, IP address, TCP/UDP ports and even VLAN ID.
Moreover, the switch supports 802.1X authentication, which is used in conjunction with a RADIUS server
to require some authentication information before access to the network is allowed. Guest VLAN function
supports to enable the non-802.1X clients to access the specific network resource.
Advanced QoS features
To integrate voice, data and video service on one network, the switch applies rich QoS policies. Administrator
can designate the priority of the traffic based on a variety of means including IP or MAC address, TCP or
UDP port number, etc, to ensure that voice and video are always clear, smooth and jitter free. In conjunction
with the Voice VLAN the switch supporting, the voice applications will operate with much smoother
performance.
Abundant Layer 2 features
For more application of layer 2 switches, TL-SG3424P supports a complete lineup of layer 2 features,
including 802.1Q tag VLAN, Port Mirroring, STP/RSTP/MSTP, Link Aggregation Control Protocol and 802.3x
Flow Control function. Any more, the switch provides advanced features for network maintenance. Such
as Loop Back Detection, Cable Diagnostics and IGMP Snooping. IGMP snooping ensures the switch
intelligently forward the multicast stream only to the appropriate subscribers while IGMP throttling &
filtering restrict each subscriber on a port level to prevent unauthorized multicast access.
Enterprise Level Management Features
TL-SG3424P is easy to use and manage. It supports various user-friendly standard management features,
such as intuitive web-based Graphical User Interface (GUI)or industry-standard Command Line Interface
(CLI), either administration traffic can be protected through SSL or SSH encryptions. SNMP (v1/2/3) and
RMON support enables the switch to be polled for valuable status information and send traps on abnormal
events. In addition, integrated NDP/NTDP protocol, the switch supports to be managed by the
commander switch through IP clustering function more easily.
Copyright © 2012 TP-LINK Technologies Co., Ltd. All rights reserved.
Datasheet
Specifications
Hardware Features & Performance
Product Picture
TL-SG3424P
Model
Hardware Features
Connector
10/100/1000Mbps
Base-T Ports
24
Combo
100/1000Mbps
SFP slots*
4
Console Port
1
Power Supply
100-240VAC, 50/60Hz
FAN Quantity
0
Certifications
CE, FCC
Standard: 802.3at/af compliant
PoE Features
PoE Ports: 24 Ports
PoE Power Supply: 320W
Dimensions (W × D × H)
Environment
17.3 × 13 × 1.7 in. (440 × 330 × 44 mm)
19-inch Rack mount Steel Case, 1U Height
Operating Temperature: 0°C~40°C (32°F~104°F), Storage Temperature: -40°C~70°C (-40°F~158°F)
Operating Humidity: 10%~90% non-condensing, Storage Humidity: 5%~90% non-condensing
Performance
Switch Capacity
48Gbps
Forwarding Rate
35.7Mpps
MAC Address Table
Jumbo Frame
8k
10KB
Software Features
L2 Switching Features
Link Aggregation
– Support static link aggregation
– Support 802.3ad LACP
– Up to 8 aggregation groups, containing 8 ports per
group
Spanning Tree Protocol(STP)
– IEEE 802.1D Spanning Tree Protocol
– IEEE 802.1s Multiple Spanning Tree Protocol
– IEEE 802.1w Rapid Spanning Tree Protocol
– STP Security: Loop back detection, TC Protect, BPDU
Filter/Protect, Root Protect
www.tp-link.com
Multicast
– Support IGMP Snooping V1/V2/V3, up to 256 groups
– Support multicast VLANs, IGMP Immediate Leave,
Unknown IGMP Throttling, IGMP Filtering, Static
Multicast IP
VLAN
– Support IEEE802.1Q with 4K VLAN groups and 4K VIDs
– Support Port VLAN, Protocol VLAN and MAC-based
VLAN
– Support GARP/GVRP feature
IEEE 802.3x flow control for Full Duplex mode and
backpressure for Half Duplex mode
Copyright © 2012 TP-LINK Technologies Co., Ltd. All rights reserved.
Datasheet
Support 802.1p CoS/DSCP priority
Support 4 priority queues
Queue scheduling: SP, WRR, SP+WRR
Port/Flow- based Rate Limiting
Voice VLAN assure voice applications much
smoother performance
DHCP Option 82
CPU Monitoring
Port Mirroring (Many to One)
Cable Diagnostics feature
Ping/Tracert feature
SNTP
Integrated NDP/NTDP feature
System Log
Advanced Security Strategies
Ethernet Protocols
IP-MAC-Port-VID Binding
Static/Dynamic Port Security (MAC-based)
DoS defend feature
Dynamic ARP Inspection
802.1x authentication
– Support 802.1x port/MAC based authentication
– Support Radius authentication and accountability
– Guest VLAN
Access Control List (ACL)
– L2~L4 package filtering based on source and
destination MAC address, IP address, TCP/UDP
ports, 802.1p, DSCP, protocol and VLAN ID
– Time based ACL
Support Broadcast, Multicast and Unknown
unicast Storm Control
Secure web management through HTTPS and
SSLv2/v3/TLSv1
Secure remote command line interface(CLI)
management with SSH v1/V2
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX/FX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
IEEE 802.3av GVRP
IEEE 802.3ad Link Aggregation
IEEE 802.3x Flow control
IEEE 802.1p QoS
IEEE 802.1q VLANs / VLAN tagging
IEEE 802.1v Protocol VLAN
IEEE 802.1d Spanning Tree Protocol (STP)
IEEE 802.1s Multiple Spanning Tree (MSTP)
IEEE 802.1w Rapid Spanning Tree (RSTP)
IEEE 802.1x Network Login Security
Quality of Service (QoS)
Management
Support Web-based GUI management mode
Support Command Line Interface(CLI) through
console port, telnet management mode
SNMP v1/v2c/v3
RMON (1, 2, 3, 9 groups)
DHCP/BOOTP Client
DHCP Snooping
www.tp-link.com
MIBs
MIB II (RFC1213)
Interface MIB (RFC2233)
Ethernet Interface MIB (RFC1643)
Bridge MIB (RFC1493)
P/Q-Bridge MIB (RFC2674)
RMON MIB (RFC2819)
RMON2 MIB (RFC2021)
Radius Accounting Client MIB (RFC2620)
Radius Authentication Client MIB (RFC2618)
Remote Ping, Traceroute MIB (RFC2925)
Support TP-LINK private MIBs
Copyright © 2012 TP-LINK Technologies Co., Ltd. All rights reserved.
Datasheet
Ordering Information
Host Switch
Product Model
Description
TL-SG3424P
JetStreamTM 24-Port Gigabit L2 Managed PoE Switch with 4 Combo SFP Slots
SFP Modules
Product Model
Description
TL-SM311LS
Gigabit SFP module, Single-mode, LC interface, Up to 10km distance
TL-SM311LM
Gigabit SFP module, Multi-mode, LC interface, Up to 550m distance
TL-SM321A
Gigabit WDM Bi-Directional SFP Module, single-mode, LC connector, TX:1550nm/RX:1310nm, 10km
TL-SM321B
Gigabit WDM Bi-Directional SFP Module, single-mode, LC connector, TX:1310nm/RX:1550nm, 10km
Media Converter
Product Model
Description
MC210CS
Gigabit single-mode SC SFP Transceiver, up to 15Km, chassis mountable
MC200CM
Gigabit multi-mode SC SFP Transceiver, up to 550m, chassis mountable
MC220L
Gigabit SFP slot supporting mini-GBIC modules, chassis mountable
MC1400
14-slot power supply chassis for TP-LINK Media Converter, 19-inch rack-mountable
* The switch supports 100/1000Mbps SFP module at full-duplex mode. When using the SFP port with a 100M module or a gigabit
module, you need to configure its corresponding Speed and Duplex mode through firmware.
By factory default, the Speed and Duplex mode of SFP port is 1000Mbps Full-duplex.
www.tp-link.com
Copyright © 2012 TP-LINK Technologies Co., Ltd. All rights reserved.
Download PDF
Similar pages