How to use the operating instructions

FL611-PFQX2072ZA-en.PDF Page 1 Thursday, December 21, 2006 11:10 AM
High Speed Laser Fax and Copier
Operating Instructions
Model No.
FOR FAX ADVANTAGE ASSISTANCE:
— PHONE CALL
1-800-HELP-FAX (1-800-435-7329)
— E-MAIL TO
consumer_fax@us.panasonic.com
for customers in the U.S.A. or Puerto
Rico
— REFER TO
www.panasonic.com
for customers in the U.S.A. or Puerto
Rico
KX-FL611
Please read these operating
instructions before using the unit
and save for future reference.
This unit is compatible with
Caller ID. To use this feature,
you must subscribe to the
appropriate service of your
service provider.
This model is designed to be
used only in the U.S.A.
FL611-PFQX2072ZA-en.book Page i Thursday, December 21, 2006 11:10 AM
Location of Controls
How to use the operating instructions
When following operating instructions, always keep the front cover page (next page) open for easy
reference to the buttons.
OPEN
i
FL611-PFQX2072ZA-en.book Page ii Thursday, December 21, 2006 11:10 AM
Location of controls
Please keep this page open when following operating instructions.
For a description of each button, see page 10.
A
B
J K L M
C
D
N O P Q
Buttons (Listed in alphabetical order)
AUTO ANSWER H
FLASH L
BROADCAST C
HANDSET MUTE K
CALLER ID PRINT R
HELP N
CALLER ID SEARCH S
LOWER T
CALLER IQ E
MANUAL BROAD D
COLLATE F
MENU P
COPY START W
MONITOR M
DIRECTORY PROGRAM O
NAME/TEL NO. T
FAX START V
NAVIGATOR Q
E F G
R S T
U
H I
V
W
QUICK SCAN START I
REDIAL/PAUSE J
RESOLUTION G
SET V
Station keys B
STOP U
TONE A
VOLUME Q
ii
FL611-PFQX2072ZA-en.book Page 2 Thursday, December 21, 2006 11:10 AM
Thank you for purchasing a Panasonic fax machine.
Things you should keep a record of
Attach your sales receipt here.
For your future reference
Date of purchase
Serial number (found on the rear of the unit)
Dealer’s name and address
Dealer’s telephone number
Caution:
L The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer
or other electronic device, including fax machines, to send any message unless such message clearly
contains in a margin at the top or bottom of each transmitted page or on the first page of the
transmission, the date and time it is sent and an identification of the business or other entity, or other
individual sending the message and the telephone number of the sending machine or such business,
other entity, or individual. (The telephone number provided may not be a 900 number or any other
number for which charges exceed local or long-distance transmission charges.)
In order to program this information into your fax machine, you should complete the instructions on
page 28 to page 30.
L Do not rub or use an eraser on the printed side of recording paper, as the print may smear.
ENERGY STAR:
L As an ENERGY STAR® Partner, Panasonic has determined that this product meets the ENERGY
STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.
Trademarks:
L openLCR and openLCR.com are the trademarks of openLCR.com, Inc.
L All other trademarks identified herein are the property of their respective owners.
Copyright:
L This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for
internal use only. All other reproduction, in whole or in part, is prohibited without the written consent
of Panasonic Communications Co., Ltd.
© 2004 Panasonic Communications Co., Ltd. All Rights Reserved.
2
FL611-PFQX2072ZA-en.book Page 3 Thursday, December 21, 2006 11:10 AM
Important Information
Important
Safety
1For
Fax
Instructions
Advantage
Informationassistance, call 1-800-435-7329.
Important safety
instructions
When using this unit, basic safety precautions
should always be followed to reduce the risk of
fire, electric shock, or personal injury.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked
on this unit.
3. Unplug this unit from power outlets before
cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this unit near water, for example
near a bathtub, wash bowl, kitchen sink, etc.
5. Place the unit securely on a stable surface.
Serious damage and/or injury may result if
the unit falls.
6. Do not cover slots and openings on the unit.
They are provided for ventilation and
protection against overheating. Never place
the unit near radiators, or in a place where
proper ventilation is not provided.
7. Use only the power source marked on the
unit. If you are not sure of the type of power
supplied to your home, consult your dealer or
local power company.
8. For safety purposes this unit is equipped with
a grounded plug. If you do not have this type
of outlet, please have one installed. Do not
defeat this safety feature by tampering with
the plug.
9. Do not place objects on the power cord.
Install the unit where no one can step or trip
on the cord.
10. Do not overload power outlets and extension
cords. This can result in the risk of fire or
electric shock.
11. Never push any objects through slots in this
unit. This may result in the risk of fire or
electric shock. Never spill any liquid on the
unit.
12. To reduce the risk of electric shock, do not
disassemble this unit. Take the unit to an
authorized service center when service is
required. Opening or removing covers may
expose you to dangerous voltage or other
risks. Incorrect reassembly can cause
electric shock when the unit is subsequently
used.
13. Unplug this unit from power outlets and refer
servicing to an authorized service center
when the following conditions occur:
A. When the power cord is damaged or
frayed.
B. If liquid has been spilled into the unit.
C. If the unit has been exposed to rain or
water.
D. If the unit does not work normally by
following the operating instructions.
Adjust only controls covered by the
operating instructions. Improper
adjustment may require extensive work
by an authorized service center.
E. If the unit has been dropped or physically
damaged.
F. If the unit exhibits a distinct change in
performance.
14. During thunderstorms, avoid using
telephones except cordless types. There may
be a remote risk of an electric shock from
lightning.
15. Do not use this unit to report a gas leak, when
in the vicinity of the leak.
SAVE THESE
INSTRUCTIONS
CAUTION:
Installation
L After moving the unit from cold areas to
warmer areas, let the unit adjust to the
warmer temperature and do not connect the
unit for about 30 minutes. If the unit is
connected too soon after a sudden climate
change, condensation may form inside the
unit causing malfunction.
L Never install telephone wiring during a
lightning storm.
L Never install telephone jacks in wet locations
unless the jack is specifically designed for
wet locations.
L Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
L Use caution when installing or modifying
telephone lines.
L Do not touch the plug with wet hands.
For Fax Advantage assistance, call 1-800-435-7329.
3
FL611-PFQX2072ZA-en.book Page 4 Thursday, December 21, 2006 11:10 AM
Important Information
Laser radiation
L The printer of this unit utilizes a laser. Use of
controls or adjustments or performance of
procedures other than those specified herein
may result in hazardous radiation exposure.
Fuser unit
L The fuser unit gets hot. Do not touch it.
L During or immediately after printing, the area
near the recording paper exit (1) also gets
warm. This is normal.
have read them, open the drum unit
protection bag. The drum unit contains a
photosensitive drum. Exposing it to light may
damage the drum. Once you have opened
the protection bag:
– Do not expose the drum unit to light for
more than 5 minutes.
– Do not touch or scratch the green drum
surface.
– Do not place the drum unit near dust or
dirt, or in a high humidity area.
– Do not expose the drum unit to direct
sunlight.
WARNING:
L To prevent the risk of fire or electrical shock,
do not expose this product to rain or any type
of moisture.
L This product contains a CR Coin Cell
Lithium Battery which contains
Perchlorate Material - special handling
may apply.
See www.dtsc.ca.gov/
hazardouswaste/perchlorate
2
1
2
Fuser unit
Toner cartridge
L Be careful of the following when you handle
the toner cartridge:
– Do not leave the toner cartridge out of the
protection bag for a long time. It will
decrease the toner life.
– If you ingest any toner, drink several
glasses of water to dilute your stomach
contents, and seek immediate medical
treatment.
– If any toner comes into contact with your
eyes, flush them thoroughly with water,
and seek medical treatment.
– If any toner comes into contact with your
skin, wash the area thoroughly with soap
and water.
– If you inhale any toner, move to an area
with fresh air and consult local medical
personnel.
Drum unit
L Read the instructions on page 12 before you
begin installation of the drum unit. After you
4
For best performance
Toner cartridge and drum unit
L In the printing process, heat is used to fuse
toner onto the page. As a result, it is normal
for the machine to produce an odor during
and shortly after printing. Be sure to use this
unit in an area with proper ventilation.
L To extend the life of the drum unit, the unit
should never be turned OFF immediately
after printing. Leave the power turned ON for
a minimum of 30 minutes after printing.
L Do not cover slots or openings on the unit.
Inspect the air circulation vents regularly and
remove any dust build-up with a vacuum
cleaner (2).
L When replacing the toner cartridge or drum
unit, do not allow dust, water, or liquids to
come in contact with the drum. This may
affect print quality.
Environment
L Keep the unit away from electrical noise
generating devices, such as fluorescent
lamps and motors.
L The unit should be kept free from dust, high
temperature and vibration.
L The unit should not be exposed to direct
sunlight.
L Do not place heavy objects on top of the unit.
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 5 Thursday, December 21, 2006 11:10 AM
Important Information
L When you leave the unit unused for a long
period of time, unplug this unit from power
outlet.
L The unit should be kept away from heat
sources such as heaters, kitchen stoves, etc.
It should not be placed in rooms where the
temperature is less than 10 °C (50 °F) or
greater than 32.5 °C (90.5 °F). Damp
basements should also be avoided.
Recording paper
L Store unused paper in the original packaging,
in a cool and dry place. Not doing so may
affect print quality.
Routine care
L Wipe the outer surface of the unit with a soft
cloth. Do not use benzine, thinner, or any
abrasive powder.
For Fax Advantage assistance, call 1-800-435-7329.
5
FL611-PFQX2072ZA-en.book Page 6 Thursday, December 21, 2006 11:10 AM
Table of Contents
1. Introduction and
Installation
1. Table of Contents
Accessories
1.1 Included accessories..........................8
1.2 Accessory information ......................10
Finding the Controls
1.3 Description of buttons....................... 10
1.4 Overview .......................................... 11
Installation
1.5 Toner cartridge and drum unit ......... 12
1.6 Paper tray and paper tray cover ....... 14
1.7 Paper stacker....................................15
1.8 Document stacker............................. 15
1.9 Handset cord ....................................16
1.10 Recording paper............................... 16
2. Preparation
Connections and Setup
2.1 Connections .....................................18
2.2 Selecting the way to use your fax
machine............................................19
2.3 Case 1: FAX ONLY ...........................20
2.4 Case 2a: Distinctive Ring (1 phone line
with 2 or more phone numbers) ....... 21
2.5 Case 2b: Distinctive Ring (using with
voice mail service)............................ 22
2.6 Case 3: EXT. TAM (External Telephone
Answering Machine) .........................23
2.7 Case 4: TEL ONLY ...........................25
2.8 Case 5: FAX with PC MODEM (one
phone number) ................................. 26
Help Button
2.9 Help function ....................................27
Volume
2.10 Adjusting volume ..............................27
Initial Programming
2.11 Date and time ................................... 28
2.12 Your logo...........................................29
2.13 Your fax number ............................... 30
4. Fax
Sending Faxes
4.1 Sending a fax manually .................... 37
4.2 Documents you can send ................. 38
4.3 Sending a fax using one-touch dial
feature and navigator directory......... 39
4.4 Broadcast transmission .................... 39
Receiving Faxes
4.5 Receiving a fax manually – Auto answer
OFF .................................................. 41
4.6 Receiving a fax automatically – Auto
answer ON........................................ 42
4.7 Junk fax prohibitor (preventing fax
reception from undesired callers) ..... 42
5. Distinctive Ring
Distinctive Ring
5.1 Distinctive Ring service from your
phone company ................................44
5.2 Using two or more phone numbers on a
single telephone line.........................44
5.3 Using three or more phone numbers on
a single telephone line...................... 44
5.4 Programming the ring pattern assigned
for fax................................................ 45
6. Copy
Copying
6.1 Making a copy ..................................46
7. Programmable Features
Features Summary
7.1 Programming ....................................48
7.2 Basic features...................................49
7.3 Advanced features............................50
7.4 Direct commands for programming
features.............................................52
8. Help
3. Telephone
Automatic Dialing
3.1 Storing names and telephone numbers
for the one-touch dial feature and
navigator directory............................32
3.2 Making a phone call using one-touch
dial feature or navigator directory ..... 33
Caller ID
3.3 Caller ID service ............................... 34
3.4 Viewing and calling back using caller
information........................................ 35
3.5 Storing caller information into the onetouch dial feature and navigator
directory............................................36
6
Error Messages
8.1 Error messages – Reports ............... 54
8.2 Error messages – Display ................ 54
Troubleshooting
8.3 When a function does not work, check
here .................................................. 57
Replacement
8.4 Replacing the toner cartridge and the
drum unit .......................................... 61
Jams
8.5 Recording paper jam ........................64
8.6 Document jams - sending................. 66
Cleaning
8.7 Cleaning the inside of the unit .......... 67
FL611-PFQX2072ZA-en.book Page 7 Thursday, December 21, 2006 11:10 AM
Table of Contents
9. Caller IQ Feature
Caller IQ Feature
9.1 openLCR service for the Caller IQ
feature .............................................. 70
9.2 To turn the Caller IQ ON / OFF......... 70
9.3 Updating the rate table (downloading
the rate table) ...................................70
9.4 Downloading information .................. 71
9.5 Viewing information .......................... 71
9.6 Printing information .......................... 71
10.General Information
Printed Reports
10.1 Reference lists and reports .............. 72
Specifications
10.2 Specifications ...................................73
FCC and Other Information
10.3 FCC and Other Information .............. 76
Limited Warranty
10.4 Limited Warranty .............................. 78
Customer Services
10.5 Customer Services directory ............ 80
11.Index
11.1 Index................................................ 81
7
FL611-PFQX2072ZA-en.book Page 8 Thursday, December 21, 2006 11:10 AM
1. Introduction and Installation
1 Introduction and Installation
1.1 Included accessories
Item
Part number*1
Quantity
1
Power cord
PFJA1030Z
1
----------
2
Telephone line cord
PQJA10075Z
1
----------
3
Handset
PFJXE0805Z
1
----------
4
Handset cord
PFJA1029Z
1
----------
5
Paper stacker
PFKS1096Z1
1
----------
6
Paper tray
PFKS1108Z1
1
----------
7
Paper tray cover
PFKV1100Z1
1
No need to install when
using legal paper.
8
Drum unit
KX-FA84
1
See page 75.
9
Toner cartridge
(starter toner cartridge)
----------
1
prints about 800 lettersized pages with a 5%
image area (page 74).
j
Operating instructions
PFQX2072Z
1
----------
k
Quick installation guide
PFQW2202Z
1
----------
l
A4 paper guides
PFZXFL511M
2
No need to install when
using letter or legal
paper.
No.
Notes
*1 Part numbers are subject to change without notice.
1
2
3
4
5
6
7
8
9
j
k
l
L No need to
install when
using letter or
legal paper.
8
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 9 Thursday, December 21, 2006 11:10 AM
1. Introduction and Installation
Note:
L If any items are missing or damaged, contact the place of purchase.
L Save the original carton and packing materials for future shipping and transportation of the unit.
For Fax Advantage assistance, call 1-800-435-7329.
9
FL611-PFQX2072ZA-en.book Page 10 Thursday, December 21, 2006 11:10 AM
1. Introduction and Installation
G {RESOLUTION}
1.2 Accessory information
Accessories for this unit can be ordered online,
by fax, or by telephone.
– Replacement toner cartridge (KX-FA83)
– Replacement drum unit (KX-FA84)
L To ensure that the unit operates properly, we
recommend the use of a Panasonic toner
cartridge and drum unit.
To place an order online (for customers in
the U.S.A. ONLY)
Visit our web site:
http://www.panasonic.com/store
L For questions regarding online orders:
E-mail: direct@us.panasonic.com
Telephone: 1-866-888-2929
To place an order by fax
Fax: 1-800-237-9080
Include:
– your name, shipping address and telephone
number
– credit card type, number, expiration date and
your signature
– part number and quantity
To place an order by telephone
Telephone: 1-800-332-5368
Finding the Controls
1.3 Description of buttons
L Keep the front cover page open for button
locations.
A {TONE}
L To change from pulse to tone temporarily
during dialing when your line has rotary
pulse services.
B Station keys
L To use the one-touch dial feature (page
32, 33, 39).
C {BROADCAST}
L To transmit a document to multiple parties
(page 39, 40).
D {MANUAL BROAD}
L To transmit a document to multiple parties
manually (page 39, 40).
E {CALLER IQ}
L To use the Caller IQ feature (page 70).
F {COLLATE}
L To make a collated copy (page 47).
10
L To select a resolution (page 37, 46).
H {AUTO ANSWER}
L To turn the auto answer setting ON/OFF
(page 41, 42).
I {QUICK SCAN START}
L To store a scanned document into
memory, and then send it (page 37).
J {REDIAL/PAUSE}
L To redial the last number dialed.
L To insert a pause during dialing.
K {HANDSET MUTE}
L To mute your voice to the other party
during a conversation. Press again to
resume the conversation.
L {FLASH}
L To access special telephone services or
for transferring extension calls.
M {MONITOR}
L To initiate dialing.
N {HELP}
L To print helpful information for quick
reference (page 27).
O {DIRECTORY PROGRAM}
L To store or edit names and telephone
numbers (page 32).
P {MENU}
L To initiate or exit programming.
Q {NAVIGATOR}{VOLUME}
L To adjust volume (page 27).
L To search for a stored item (page 33, 39).
L To select features or feature settings
during programming (page 48).
L To navigate to the next operation.
R {CALLER ID PRINT}
L To print the Caller ID list (page 35).
S {CALLER ID SEARCH}
L To view caller information (page 35).
T {LOWER}{NAME/TEL NO.}
L To select stations 12–22 for the one-touch
dial feature (page 32, 33, 39).
L To change the display of the caller
information (page 35).
U {STOP}
L To stop an operation or programming
session.
V {FAX START}{SET}
L To start sending or receiving a fax.
L To store a setting during programming.
W {COPY START}
L To copy a document (page 46).
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 11 Thursday, December 21, 2006 11:10 AM
1. Introduction and Installation
1.4 Overview
1
7
2
8
3
4
j
9
5
k
6
l
1 Handset
2 Speaker
3 Document guides
4 Paper tray cover
5 Tension plate
6 Paper tray
7 Paper stacker*1
8 Document stacker*1
9 Recording paper exit
j Document exit
k Front cover
l Document entrance
*1 The paper stacker and document stacker
may not be shown in all illustrations.
For Fax Advantage assistance, call 1-800-435-7329.
11
FL611-PFQX2072ZA-en.book Page 12 Thursday, December 21, 2006 11:10 AM
1. Introduction and Installation
3
Installation
1.5 Toner cartridge and
drum unit
Place the toner cartridge (1) into the drum
unit (2) vertically.
1
The included toner cartridge is a starter toner
cartridge. It will print about 800 letter-sized
pages with a 5 % image area (page 74).
Caution:
L Read the following instructions before
you begin installation. After you have read
them, open the drum unit protection bag.
The drum unit contains a photosensitive
drum. Exposing it to light may damage the
drum. Once you have opened the
protection bag:
– Do not expose the drum unit to light for
more than 5 minutes.
– Do not touch or scratch the green
drum surface.
– Do not place the drum unit near dust or
dirt, or in a high humidity area.
– Do not expose the drum unit to direct
sunlight.
L Do not leave the toner cartridge out of the
protection bag for a long time. It will
decrease the toner life.
1
Before opening the protection bag of the new
toner cartridge, shake it vertically more than
5 times.
2
4
Firmly press down the toner cartridge to
snap into position.
5
Turn the two levers (1) on the toner
cartridge firmly.
1
2
Remove the toner cartridge and drum unit
from the protection bags. Peel off the seal
(1) from the toner cartridge.
6
Make sure that the triangles (1) match, to
install the toner cartridge correctly.
1
1
12
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 13 Thursday, December 21, 2006 11:10 AM
1. Introduction and Installation
7
Lift open the front cover (1), holding OPEN
(2).
9
Close the front cover (1) by pushing down
on both sides, until locked.
1
1
2
L If the lower glass (3) is dirty, clean it with
a soft and dry cloth.
Toner save feature
If you want to reduce toner consumption, set the
toner save setting to ON (feature #79 on page
51). The toner cartridge will last approximately
40 % longer. This feature may lower the print
quality.
3
8
L While the unit displays “PLEASE WAIT”,
do not open the front cover, or disconnect
the power cord.
Install the drum and toner unit (1) by holding
the tabs.
2
1
L Do not touch the transfer roller (2).
For Fax Advantage assistance, call 1-800-435-7329.
13
FL611-PFQX2072ZA-en.book Page 14 Thursday, December 21, 2006 11:10 AM
1. Introduction and Installation
1.6 Paper tray and paper
tray cover
1
Insert the paper tray (1) into the slot (2) on
the back of the unit.
1
2
2
Note:
L Do not place the unit in an area where the
paper tray may be obstructed (i.e., by a wall,
etc.).
L Keep this surface (4) away from walls etc.
more than 50 mm (131/32") to let the unit cool
down.
To remove the paper tray
Pull the paper tray forward in the direction of the
arrow.
Pull the tension plate forward (1) and attach
the paper tray cover (2), then push the
tension plate back (3).
2
1
4
3
When you use legal paper, do not attach the
paper tray cover.
14
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 15 Thursday, December 21, 2006 11:10 AM
1. Introduction and Installation
1.7 Paper stacker
1.8 Document stacker
Line up the slots (1) in the paper stacker with
the pegs (2) on the bottom of the unit, then
insert the two tabs of the paper stacker into the
slots on the unit (3).
Pull the document stacker (1) forward gently
until it clicks into place, then press the center
part of the document stacker (2) to open the
extender (3).
2
3
1
1
Note:
L Do not place the unit in an area where the
paper stacker may be easily bumped into.
L Document and recording paper will be
ejected from the front of the unit. Do not place
anything in front of the unit.
L The paper stacker can hold up to
approximately 100 sheets of printed paper.
Remove the printed paper before the paper
stacker becomes full.
2
3
For Fax Advantage assistance, call 1-800-435-7329.
15
FL611-PFQX2072ZA-en.book Page 16 Thursday, December 21, 2006 11:10 AM
1. Introduction and Installation
2
Pull the tension plate forward (1).
1.9 Handset cord
Connect the handset cord (1).
1
3
Remove the paper tray cover (1).
1
1
1.10 Recording paper
A4, letter or legal size recording paper can be
used for fax messages.
The unit can hold:
– Up to 250 sheets of 60 g/m2 to 75 g/m2 (16 lb.
to 20 lb.) paper.
– Up to 230 sheets of 80 g/m2 (21 lb.) paper.
– Up to 200 sheets of 90 g/m2 (24 lb.) paper.
Please refer to page 74 for information on
recording paper.
L The unit is set for letter size paper by default.
If you want to use legal or A4 size paper,
change the setting (feature #16 on page 49).
1
4
Insert the paper, print-side down (1).
1
Before inserting a stack of paper, fan the
paper to prevent paper jams.
2
2
L The paper should not be over the tabs
(2).
L If the paper is not inserted correctly,
readjust the paper, or the paper may jam.
16
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 17 Thursday, December 21, 2006 11:10 AM
1. Introduction and Installation
Correct
Incorrect
L “L” is shown on the A4 paper guide for the left
side.
“R” is shown on the A4 paper guide for the
right side.
Note:
L When you use letter or legal paper, you do
not need to install the A4 paper guides.
L Change the recording paper size to “A4”
(feature #16 on page 49).
5
Attach the paper tray cover (1).
1
6
Push the tension plate back (1).
1
To use A4 size paper
Insert the tabs on the A4 paper guides (1) into
the slots.
1
For Fax Advantage assistance, call 1-800-435-7329.
17
FL611-PFQX2072ZA-en.book Page 18 Thursday, December 21, 2006 11:10 AM
2. Preparation
2 Preparation
2For
Connections
Fax Advantage
and Setup
assistance, call 1-800-435-7329.
2.1 Connections
Caution:
L When you operate this product, the power
outlet should be near the product and
easily accessible.
1 Telephone line cord
L Connect to a single telephone line jack
(RJ11).
2 Power cord
L Connect to the power outlet
(120 V, 60 Hz).
3 [EXT] jack
L Remove the stopper if attached.
4 Answering machine (not included)
If you use this unit with a computer or
subscribe to an xDSL service
Fax transmission/reception may be disturbed,
noise interference may be heard during
telephone conversation, or Caller ID (page 34)
may not function properly. A filter to prevent this
is provided from your service company. Please
attach the filter (1) to the telephone line cord of
the fax machine.
1
3
4
1
2
5
Note:
L To avoid malfunction, do not position the fax
machine near appliances such as TVs or
speakers which generate an intense
magnetic field.
L If any other device is connected to the same
telephone line, this unit may disturb the
network condition of the device.
Using surge protectors
L The warranty does not cover damage due to
power line surges or lightning. For additional
protection, we recommend the use of a surge
protector (5).
18
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 19 Thursday, December 21, 2006 11:10 AM
2. Preparation
2.2 Selecting the way to
use your fax machine
Depending on your situation, you can select the
way you prefer to use your fax machine in Quick
Setup feature #00.
You can print out the Quick Setup Guide as a
reference.
– Case 1: FAX ONLY (page 20)
– Case 2a: Distinctive Ring (1 phone line with 2
or more phone numbers) (page 21)
– Case 2b: Distinctive Ring (using with voice
mail service) (page 22)
– Case 3: EXT. TAM (page 23)
– Case 4: TEL ONLY (page 25)
– Case 5: FAX with PC MODEM (one phone
number) (page 26)
L About case 5, see page 26 for details.
{MENU} {A}{B}
1
2
{SET}
Press {MENU}.
Press {#} then {0}{0}.
QUICK SETUP
PRESS SET
3
Press {SET}.
L The Quick Setup Guide will be printed.
4
Press {A} or {B} repeatedly to display the
desired setting.
5
6
Press {SET}.
Press {MENU}.
For Fax Advantage assistance, call 1-800-435-7329.
19
FL611-PFQX2072ZA-en.book Page 20 Thursday, December 21, 2006 11:10 AM
2. Preparation
2.3.4 How faxes are received
2.3 Case 1: FAX ONLY
2.3.1 Your situation
Leave {AUTO ANSWER} turned ON. When the
other party sends a fax, the fax machine will
receive it automatically.
You wish to use the fax machine only for fax
reception/transmission.
2.3.2 Telephone wiring image in
house or office
Fax machine
Single
telephone
line
(1 phone
number)
2.3.3 How to setup
{MENU} {A}{B}
1
2
{SET}
Press {MENU}.
Press {#} then {0}{0}.
QUICK SETUP
PRESS SET
3
Press {SET}.
L The Quick Setup Guide will be printed.
4
Press {A} or {B} repeatedly to display the
following.
SELECT A SETUP
=FAX ONLY
[±]
5
Press {SET}.
L The {AUTO ANSWER} light is ON.
6
Press {MENU}.
Note:
L The ring count is set to 2. You can change the
ring setting in feature #06 (page 49).
20
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 21 Thursday, December 21, 2006 11:10 AM
2. Preparation
3
2.4 Case 2a: Distinctive
Ring (1 phone line with 2
or more phone numbers)
2.4.1 Your situation
You wish to use this unit to receive faxes using
one phone number and to handle phone calls
using another phone number. You must get an
additional phone number by subscribing to your
telephone company’s Distinctive Ring service.
L Distinctive Ring service may be called Identa
Ring service. The name of the service
depends on the telephone company.
2.4.2 Telephone wiring image in
house or office
2 numbers example
Room
Room
Single
telephone
line
(2 phone
numbers)
Answering
Fax machine
machine
Facsimile No.
Telephone No. (555-1333)
(555-1111)
2.4.3 How to setup
{MENU} {A}{B}
Press {#} then {0}{0}.
QUICK SETUP
PRESS SET
4
Press {SET}.
L The Quick Setup Guide will be printed.
5
Press {A} or {B} repeatedly to display the
following.
SELECT A SETUP
=DIST. RING [±]
6
Press {SET}.
L The {AUTO ANSWER} light is ON.
7
Press {MENU}.
L You cannot change the receiving mode
while the Distinctive Ring feature is
activated.
2.4.4 How phone calls and faxes
are received
If the number assigned for phone calls is called,
the fax machine and answering machine will ring
and then the answering machine will record
voice message automatically.
If the number assigned for fax is called, all the
phones will ring but only the fax machine will
respond and receive the incoming fax. The fax
machine will answer before the answering
machine will.
If you subscribe to three or more phone
numbers on a single telephone line
Each phone number will be assigned a different
ring pattern by the phone company.
To use one number for fax, program the ring
pattern assigned for fax (feature #32 on page 45)
by referring to the ring pattern table (page 44).
{SET}
1
Subscribe to Distinctive Ring service at your
local telephone company to get a new phone
number.
2
Press {MENU}.
For Fax Advantage assistance, call 1-800-435-7329.
21
FL611-PFQX2072ZA-en.book Page 22 Thursday, December 21, 2006 11:10 AM
2. Preparation
2.5 Case 2b: Distinctive
Ring (using with voice mail
service)
2.5.1 Your situation
You have already subscribed to voice mail
service and also wish to receive a fax
automatically.
You must get an additional phone number by
subscribing to your telephone company’s
Distinctive Ring service.
L Distinctive Ring service may be called Identa
Ring service. The name of the service
depends on the telephone company.
2.5.2 Telephone wiring image in
house or office
2 numbers example
Room
Extension
telephone
(555-1333)
Room
Single
telephone
line
(2 phone
numbers)
Fax machine
(555-1333)
Telephone company service
Voice mail
(555-1111)
22
Subscribe to Distinctive Ring service at your
local telephone company to get a new fax
number.
L You do not need to apply to a voice mail
service for the new number.
2
3
Press {MENU}.
Press {#} then {0}{0}.
QUICK SETUP
PRESS SET
4
Press {SET}.
L The Quick Setup Guide will be printed.
5
Press {A} or {B} repeatedly to display the
following.
SELECT A SETUP
=DIST. RING [±]
6
Press {SET}.
L The {AUTO ANSWER} light is ON.
7
Press {MENU}.
L You cannot change the receiving mode
while the Distinctive Ring feature is
activated.
2.5.4 How phone calls and faxes
are received
If the number assigned for phone calls is called,
a voice message will be recorded in the voice
mail service. The fax machine will ignore the
incoming call.
If the number assigned for fax is called, the fax
machine will ring. If an extension telephone is
connected on the same line, it will also ring.
Then the fax machine will start fax reception
automatically.
If you subscribe to three or more phone
numbers on a single telephone line
Each phone number will be assigned a different
ring pattern by the phone company.
To use one number for fax, program the ring
pattern assigned for fax (feature #32 on page 45)
by referring to the ring pattern table (page 44).
2.5.3 How to setup
{MENU} {A}{B}
1
{SET}
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 23 Thursday, December 21, 2006 11:10 AM
2. Preparation
L The {AUTO ANSWER} light is ON.
2.6 Case 3: EXT. TAM
(External Telephone
Answering Machine)
2.6.1 Your situation
You wish to use the fax machine and your
answering machine in the same room.
2.6.2 Telephone wiring image in
house or office
Single
telephone
line
(1 phone
number)
Fax
machine
Answering
machine
2.6.3 How to setup
{MENU} {A}{B}
1
2
{SET}
{FAX START}
Press {MENU}.
Turn on your answering machine.
Adjust the ring setting of the answering
machine to 4 or less.
L This will allow the answering machine to
answer the call first.
2.6.4 How phone calls and faxes
are received
At first your answering machine will pick up the
call.
L If the call is a phone call, the answering
machine will record a voice message
automatically.
L If a fax calling tone is detected, the answering
machine will be disconnected and the call will
be switched to the fax machine. The fax
machine will receive a fax automatically.
Receiving a voice message and fax
document in one call
The caller can leave a voice message and send
a fax document during the same call. Inform the
caller of the following procedure beforehand.
1. The caller calls your unit.
L The answering device will answer the call.
2. The caller can leave a message after the
greeting message.
3. The caller presses {*} {#} {9} (preselected fax activation code).
L The unit will activate the fax function.
4. The caller presses the start button to send a
document.
Note:
L To receive fax documents using the
extension telephone, make sure remote fax
activation is turned ON (feature #41 on page
50) beforehand. The default setting is ON.
Press {MENU}.
Press {#} then {0}{0}.
QUICK SETUP
PRESS SET
3
Press {SET}.
L The Quick Setup Guide will be printed.
4
Press {A} or {B} repeatedly to display the
following.
SELECT A SETUP
=EXT. TAM
[±]
5
6
7
8
Press {SET}.
If the answering machine is turned OFF
The fax machine will ring 5 times and receive
faxes automatically.
With the fax machine
1. Lift the handset to answer the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {FAX START}.
3. Replace the handset.
For Fax Advantage assistance, call 1-800-435-7329.
23
FL611-PFQX2072ZA-en.book Page 24 Thursday, December 21, 2006 11:10 AM
2. Preparation
L The fax machine will start reception.
With an extension telephone
If you have another telephone connected to the
same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the
handset of the extension telephone.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {*} {#} {9} (pre-selected fax
activation code) firmly.
L The fax machine will start reception.
3. Replace the handset.
Note:
L To receive fax documents using the
extension telephone, make sure remote fax
activation is turned ON (feature #41 on page
50) beforehand. The default setting is ON.
24
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 25 Thursday, December 21, 2006 11:10 AM
2. Preparation
6
2.7 Case 4: TEL ONLY
2.7.1 Your situation
You wish to use the fax machine and an
extension telephone in a different room. Most
incoming calls are phone calls and the fax
machine is seldom used for fax reception.
2.7.2 Telephone wiring image in
house or office
Room
Extension
telephone
Room
Single
telephone
line
(1 phone
number)
Fax machine
2.7.3 How to setup
{MENU} {A}{B}
1
2
{SET}
{FAX START}
Press {MENU}.
2.7.4 How phone calls and faxes
are received
You have to answer all calls manually.
You can receive a fax with the fax machine and
an extension telephone.
With the fax machine
1. Lift the handset to answer the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {FAX START}.
L The fax machine will start reception.
3. Replace the handset.
With an extension telephone
If you have another telephone connected to the
same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the
handset of the extension telephone.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {*} {#} {9} (pre-selected fax
activation code) firmly.
L The fax machine will start reception.
3. Replace the handset.
Note:
L To receive fax documents using the
extension telephone, make sure remote fax
activation is turned ON (feature #41 on page
50) beforehand. The default setting is ON.
Press {MENU}.
Press {#} then {0}{0}.
QUICK SETUP
PRESS SET
3
Press {SET}.
L The Quick Setup Guide will be printed.
4
Press {A} or {B} repeatedly to display the
following.
SELECT A SETUP
=TEL ONLY
[±]
5
Press {SET}.
L The {AUTO ANSWER} light is OFF.
For Fax Advantage assistance, call 1-800-435-7329.
25
FL611-PFQX2072ZA-en.book Page 26 Thursday, December 21, 2006 11:10 AM
2. Preparation
2.8 Case 5: FAX with PC
MODEM (one phone
number)
2.8.1 Your situation
You wish to use a computer connected via
MODEM and the fax machine on a single
telephone line.
The fax machine and the computer are in the
same room and you do not want the computer to
answer incoming calls automatically.
2.8.2 Telephone wiring image in
house or office
Single
telephone
line
(1 phone
number)
Fax
machine
2
Confirm the automatic answer feature on the
computer is set to OFF.
Note:
L You can also select “FAX ONLY” by #00
(page 20).
2.8.4 How faxes are received
When receiving calls, the fax machine will
automatically answer all calls and only receive
fax documents.
Note:
L If you use your computer as an answering
machine, please refer to page 23.
L When the fax machine is using the telephone
line (e.g., during phone calls, fax
sending/receiving), the telephone line is busy
and MODEM cannot be used.
L When the PC is using the telephone line, the
following will be displayed:
EXT. IN USE
Computer
“EXT. IN USE” means MODEM or an
extension telephone is in use on the same
line.
Do not use the fax machine while the
message is displayed, or else the PC
activities could be disturbed.
2.8.3 How to setup
{A}{B}
1
L You can change the ring count setting by
pressing {A} or {B}.
Press {SET} to complete the ring count
setting.
L The {AUTO ANSWER} light is ON.
{SET}
Set the fax machine to FAX ONLY mode by
pressing {AUTO ANSWER} repeatedly to
display the following.
FAX ONLY MODE
3 RINGS
[±]
L The display will show the number of rings
before the fax machine answers a call in
FAX ONLY mode.
26
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 27 Thursday, December 21, 2006 11:10 AM
2. Preparation
Help Button
2.9 Help function
2.10 Adjusting volume
The unit contains helpful information which can
be printed for quick reference.
Basic settings:
How to set the date, time, your logo and fax
number.
Feature list:
How to program the features.
Directory:
How to store names and numbers in the
directory and how to dial them.
Fax sending/receiving:
Help with problems sending/receiving faxes.
Copier:
How to use the copier function.
Q and A:
Frequently asked questions and answers.
Errors:
Explanation of error messages shown on the
display.
Reports:
List of available reports.
Caller ID:
How to use the Caller ID features.
{A}{B}
{SET}
Ringer volume
4 levels (high/medium/low/off) are available.
While the unit is idle, press {A} or {B}.
L If any documents are in the document
entrance, you cannot adjust the volume.
Confirm that there are no documents in the
entrance.
To turn the ringer OFF
1. Press {B} repeatedly to display “RINGER
OFF= OK?”.
2. Press {SET}.
L When a call is received, the unit will not
ring and will display “INCOMING CALL”.
L To turn the ringer back ON, press {A}.
Ringer pattern
L You can select one of three ringer patterns
(feature #17 on page 49).
{HELP}
{<}{>}
1
2
3
{SET}
Press {HELP}.
Press {<} or {>} repeatedly to display the
desired item.
Handset receiver volume
5 levels (high to low) are available.
While using the handset, press {A} or {B}.
Monitor volume
8 levels (high to low) are available.
While using the monitor, press {A} or {B}.
Initial Programming
Press {SET}.
L The selected item will be printed.
Volume
For Fax Advantage assistance, call 1-800-435-7329.
27
FL611-PFQX2072ZA-en.book Page 28 Thursday, December 21, 2006 11:10 AM
2. Preparation
Note:
L The other party’s fax machine will print the
date and time on the top of each page you
send according to your unit’s date and time
setting.
L The accuracy of the clock is approximately
±60 seconds a month.
2.11 Date and time
You must set the date and time.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
{MENU}
{SET}
{<}{>}
1
Press {MENU}.
SYSTEM SETUP
PRESS NAVI.[( )]
2
Press {<} or {>} repeatedly to display the
following.
If you have subscribed to a Caller ID
service
The date and time will be automatically set
according to the received caller information.
L If the time has not previously been set, Caller
ID will not adjust the clock.
If you have registered with openLCR
service
The date and time will be automatically set.
SET DATE & TIME
PRESS SET
3
Press {SET}.
L The cursor (|) will appear on the display.
M:|
01/D:01/Y:04
TIME: 12:00AM
4
Enter the current month/date/year by
selecting 2 digits for each.
Example: August 10, 2004
Press {0}{8} {1}{0} {0}{4}.
M:08/D:10/Y:04
TIME: |
12:00AM
5
Enter the current hour/minute by selecting 2
digits for each. Press {*} to select “AM” or
“PM”.
Example: 10:15PM (12 hour clock entry)
1. Press {1}{0} {1}{5}.
M:|
08/D:10/Y:04
TIME: 10:15AM
2. Press {*} repeatedly to display “PM”.
M:|
08/D:10/Y:04
TIME: 10:15PM
6
Press {SET}.
L The next feature will be displayed.
7
Press {MENU} to exit.
28
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 29 Thursday, December 21, 2006 11:10 AM
2. Preparation
Keypad
Characters
2.12 Your logo
{5}
J
The logo can be your name or the name of your
company.
{6}
K L
l
5
M N O m n
o
6
{7}
P Q R S p
q
r
{8}
T U V t
v
8
{9}
W X Y Z w x
{0}
0
(
)
% & ¥
{MENU}
{STOP}
{SET}
{<}{>}{A}{B}
{FLASH}
{HANDSET MUTE}
1
Press {MENU}.
SYSTEM SETUP
PRESS NAVI.[( )]
2
Press {<} or {>} repeatedly to display the
following.
YOUR LOGO
PRESS SET
3
Press {SET}.
L The cursor (|) will appear on the display.
s
7
y
z
9
!
"
#
$
@ @ ^
’
→
u
< >
To change capital or lowercase letter.
{FLASH}
To enter a hyphen.
{HANDSET
MUTE}
To insert a space.
{STOP}
To delete a digit.
Note:
L To enter another character that is located on
the same dial key, press {>} to move the
cursor to the next space.
To enter your logo
Example: “BILL”
1. Press {2} 2 times.
LOGO=|
B
2. Press {4} 3 times.
LOGO=B|
I
4
Enter your logo, up to 30 characters. See the
following character table for details.
5
Press {SET}.
L The next feature will be displayed.
3. Press {5} 3 times.
LOGO=BI|
L
4. Press {>} to move the cursor to the next
space and press {5} 3 times.
Press {MENU} to exit.
Note:
L Your logo will be printed on the top of each
page sent from your unit.
To select characters with the dial keypad
Keypad
Characters
{1}
1
[
]
{
}
+
–
/
,
.
_
`
:
;
?
|
{2}
A B C a
b
c
2
{3}
D E F d
e
f
3
{4}
G H I
h
i
4
g
k
{#}
LOGO=|
6
j
LOGO=BIL|
L
To change capital or lower-case letters
Pressing the {#} key will change to capital or
lower-case alternately.
1. Press {2} 2 times.
LOGO=|
B
=
2. Press {4} 3 times.
For Fax Advantage assistance, call 1-800-435-7329.
LOGO=B|
I
29
FL611-PFQX2072ZA-en.book Page 30 Thursday, December 21, 2006 11:10 AM
2. Preparation
3. Press {#}.
LOGO=B|
i
2.13 Your fax number
4. Press {5} 3 times.
LOGO=Bi|
l
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character, and make the correction.
To delete a character
Press {<} or {>} to move the cursor to the
character you want to delete and press {STOP}.
L To erase all characters, press and hold
{STOP}.
To insert a character
1. Press {<} or {>} to move the cursor to the
position to the right of where you want to
insert the character.
2. Press {HANDSET MUTE} to insert a space
and enter the character.
To select characters using {A} or {B}
Instead of pressing the dial keys, you can select
characters using {A} or {B}.
1. Press {B} repeatedly to display the desired
character. Characters will be displayed in the
following order:
1 Uppercase letters
2 Number
3 Symbol
4 Lowercase letters
L If you press {A}, the order will be
reversed.
2. Press {>} to insert the character.
3. Return to step 1 to enter the next character.
{MENU}
{FLASH}
1
{STOP}
{<}{>}
{SET}
Press {MENU}.
SYSTEM SETUP
PRESS NAVI.[( )]
2
Press {<} or {>} repeatedly to display the
following.
YOUR FAX NO.
PRESS SET
3
Press {SET}.
L The cursor (|) will appear on the display.
NO.=|
4
Enter your fax number, up to 20 digits.
Example:
NO.=1234567|
5
Press {SET}.
L The next feature will be displayed.
6
Press {MENU} to exit.
Note:
L Your fax number will be printed on the top of
each page sent from your unit.
L The {*} button enters a “+” and the {#}
button enters a space.
Example: +234 5678
Press {*}{2}{3}{4}{#}{5}{6}{7}{8}.
L To enter a hyphen in a telephone number,
press {FLASH}.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
To delete a number
Press {<} or {>} to move the cursor to the
number you want to delete and press {STOP}.
30
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 31 Thursday, December 21, 2006 11:10 AM
2. Preparation
L To erase all numbers, press and hold
{STOP}.
For Fax Advantage assistance, call 1-800-435-7329.
31
FL611-PFQX2072ZA-en.book Page 32 Thursday, December 21, 2006 11:10 AM
3. Telephone
L To program other items, repeat steps 2 to
6.
3 Telephone
Automatic
Dialing
3.1 Storing names and
telephone numbers for the
one-touch dial feature and
navigator directory
For rapid access to frequently dialed numbers,
the unit provides the one-touch dial feature (22
items) and navigator directory (100 items).
L Station 1 to 3 can be used alternatively as
broadcast keys (page 39).
L You can also send faxes using one-touch dial
feature and navigator directory (page 39).
7
Press {DIRECTORY PROGRAM}.
Helpful hints:
L You can confirm the stored items by printing
the telephone number list (page 72).
Note:
L A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character/number, and then make the
correction.
Station keys
To delete a character/number
Press {<} or {>} to move the cursor to the
character/number you want to delete, and press
{STOP}.
L To erase all characters/numbers, press and
hold {STOP}.
3.1.2 Storing navigator directory
items
{LOWER}
{SET}
{<}{>}{A}{B} {STOP}
{DIRECTORY PROGRAM}
1
2
3
Press {DIRECTORY PROGRAM}.
4
5
6
Press {SET}.
7
Press {DIRECTORY PROGRAM}.
3.1.1 Storing one-touch dial item
1
2
Press {DIRECTORY PROGRAM}.
Select the desired station key.
For stations 1–3:
1. Press one of the station keys.
Example:
STATION 1
DIAL MODE
[±]
2. Press {SET}.
For stations 4–11:
Press one of the station keys.
For stations 12–22:
Press {LOWER}, then press one of the
station keys.
3
Enter the name, up to 10 characters (see
page 29 for instructions).
4
5
6
Press {SET}.
32
Enter the telephone number, up to 30 digits.
Press {SET}.
Press {>}.
Enter the name, up to 10 characters (see
page 29 for instructions).
Enter the telephone number, up to 30 digits.
Press {SET}.
L To program other items, repeat steps 3 to
6.
Helpful hints:
L For your convenience, HELP-FAX (1-800435-7329) has been stored in the directory. If
you cannot solve a problem, call the number
(page 33). If not needed, you can erase it
(page 33).
L You can confirm the stored items by printing
the telephone number list (page 72).
Note:
L If “SPACE= 5 DIRS.” is displayed, you can
store only 5 more items.
L A hyphen or a space entered in a telephone
number counts as 2 digits.
FL611-PFQX2072ZA-en.book Page 33 Thursday, December 21, 2006 11:10 AM
3. Telephone
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character/number, and then make the
correction.
To delete a character/number
Press {<} or {>} to move the cursor to the
character/number you want to delete, and press
{STOP}.
L To erase all characters/numbers, press and
hold {STOP}.
3.1.3 Editing a stored item
1
Press {>}.
L Confirm that there are no documents in
the document entrance.
2
Press {A} or {B} repeatedly to display the
desired item.
3
4
Press {DIRECTORY PROGRAM}.
3.2 Making a phone call
using one-touch dial
feature or navigator
directory
Before using this feature, store the desired
names and telephone numbers in one-touch dial
feature and navigator directory (page 32).
L Keep the front cover page open for button
locations.
3.2.1 Using one-touch dial
feature
1
2
Edit the name. For further details, see the
storing procedure on page 32.
6
Press {SET}.
L If you do not need to edit the telephone
number, skip to step 8.
7
Edit the telephone number. For further
details, see the storing procedure on page
32.
8
Press {SET}.
L To edit other items, repeat steps 2 to 8.
9
Press {STOP}.
3.1.4 Erasing a stored item
1
Press {>}.
L Confirm that there are no documents in
the document entrance.
2
Press {A} or {B} repeatedly to display the
desired item.
3
4
Press {DIRECTORY PROGRAM}.
5
Press {SET}.
L To erase other items, repeat steps 2 to 5.
6
Press {STOP}.
Press {#}.
L To cancel erasing, press {STOP}.
Select the desired station key.
For stations 1–11:
Press the desired station key.
Press {*}.
L If you do not need to edit the name, skip
to step 6.
5
Press {MONITOR} or lift the handset.
For stations 12–22:
Press {LOWER}, then press the desired
station key.
L The unit will start dialing automatically.
3.2.2 Using the navigator
directory
1
Press {>}.
L Confirm that there are no documents in
the document entrance.
2
Press {A} or {B} repeatedly to display the
desired item.
3
Press {MONITOR} or lift the handset.
L The unit will start dialing automatically.
To search for a name by initial
Example: “LISA”
1. Press {>}.
L Confirm that there are no documents in
the document entrance.
2. Press {A} or {B} to initiate the navigator
directory.
3. Press {5} repeatedly to display any name
with the initial “L” (see the character table,
page 29).
L To search for symbols (not letters or
numbers), press {*}.
4. Press {A} or {B} repeatedly to display
“LISA”.
L To stop the search, press {STOP}.
33
FL611-PFQX2072ZA-en.book Page 34 Thursday, December 21, 2006 11:10 AM
3. Telephone
L To dial the displayed party, press
{MONITOR} or lift the handset.
Caller ID
3.3 Caller ID service
This unit is compatible with the Caller ID
service offered by your local telephone
company. To use this unit’s Caller ID
features, you must subscribe to Caller ID
service.
Make sure the following ring setting is set to
2 or more rings beforehand.
– FAX ring setting (feature #06 on page 49)
3.3.1 How Caller ID is displayed
The calling party’s name or telephone number
will be displayed after the 1st ring. You then have
the option of whether or not to answer the call.
The unit will automatically store caller
information (name, telephone number and the
time of the call) of the 30 most recent calls. Caller
information is stored by the most recent to the
oldest call. When the 31st call is received, the
oldest call is deleted.
Caller information can be viewed on the display
one item at a time (page 35) or confirmed by
printing the Caller ID list (page 35).
L When caller information is received and it
matches a telephone number stored in the
unit’s one-touch dial or navigator directory,
the stored name will be displayed.
L If the unit is connected to a PBX (Private
Branch Exchange) system, caller information
may not be received properly. Consult your
PBX supplier.
L If the unit cannot receive caller information,
the following will be displayed:
“OUT OF AREA”: The caller dialed from an
area which does not provide Caller ID
service.
“PRIVATE CALLER”: The caller requested
not to send caller information.
“LONG DISTANCE”: The caller made a long
distance call.
To confirm caller information by printing
the Caller ID list
– To print manually, see page 35.
– To print automatically after every 30 new
calls, activate feature #26 (page 50).
34
FL611-PFQX2072ZA-en.book Page 35 Thursday, December 21, 2006 11:10 AM
3. Telephone
3.4 Viewing and calling
back using caller
information
You can easily view caller information and call
back.
Important:
L Calling back will not be possible in the
following cases:
– The telephone number includes data
other than numbers (i.e., * or #).
– The caller information does not
include a telephone number.
{MONITOR}
{NAME/TEL NO.}
Display while viewing
L When the unit could not receive a name, the
display will show “NO NAME RCVD”.
L When no calls have been received, the
display will show “NO CALLER DATA”.
To edit a telephone number before calling
back
Press {*} repeatedly after step 2. Each time
you press {*}, the telephone number will be
changed as follows:
1
1 - Area code - Local telephone number
(“1” added)
2
Local telephone number only (area code
omitted)
3
Area code - Local telephone number
4
1 - Local telephone number (“1” added
and area code omitted)
To stop viewing
Press {STOP} after step 2.
3.4.1 Printing the Caller ID list
{MENU}
{<}{A}{B}
{STOP}
{FAX START}
{CALLER ID PRINT} {SET}
{CALLER ID SEARCH}
1
2
3
1
Press {CALLER ID PRINT} to start printing.
L The display will show “ALL ERASE OK?”
after printing.
2
Press {STOP} to exit the program.
L To erase all of the stored caller
information, press {SET} instead of
{STOP}.
Press {CALLER ID SEARCH}.
Press {A} to search from the most recently
received caller information.
L If you press {B}, the display order will be
reversed.
Press {MONITOR} or lift the handset to
return the call.
L The unit will start dialing automatically.
L To send a fax, insert the document FACE
DOWN and press {FAX START}.
To change the way caller information is
displayed
Press {NAME/TEL NO.} repeatedly after step 2.
Example:
SAM LEE
11:20AM Jul 20 ,
b
1-134-567-8901
11:20AM Jul 20 ,
3.4.2 Erasing all caller
information
1
Press {MENU} repeatedly to display
“CALLER SETUP”.
2
Press {SET}.
L “CALL LIST ERASE” will be displayed.
3
Press {SET}.
L To cancel erasing, press {STOP}, then
{MENU}.
4
5
Press {SET}.
Press {STOP} to exit the program.
3.4.3 Erasing specific caller
information
1
Press {CALLER ID SEARCH}.
L Check mark (,) on the display means the call
has already been viewed or answered.
35
FL611-PFQX2072ZA-en.book Page 36 Thursday, December 21, 2006 11:10 AM
3. Telephone
2
Press {A} or {B} repeatedly to display the
desired item.
3
Press {<}.
L To cancel erasing, press {STOP} 2 times.
4
Press {SET}.
L To erase other items, repeat steps 2 to 4.
5
Press {STOP} to exit the program.
3.5 Storing caller
information into the onetouch dial feature and
navigator directory
L Keep the front cover page open for button
locations.
Important:
L This feature is not available in the
following cases.
– The telephone number includes data
other than numbers (i.e., * or #).
– The caller information does not
include a telephone number.
1
2
Press {CALLER ID SEARCH}.
3
4
Press {DIRECTORY PROGRAM}.
Press {A} or {B} repeatedly to display the
desired item.
Select the station key or navigator directory.
For stations 1–3:
1. Press the desired station key.
2. Press {SET}.
3. Press {SET}.
For stations 4–11:
1. Press the desired station key.
2. Press {SET}.
For stations 12–22:
1. Press {LOWER}, then press the desired
station key.
2. Press {SET}.
For navigator directory:
1. Press {<} or {>}.
2. Press {SET}.
5
36
Press {SET}.
Note:
L You can confirm the stored items by printing
the telephone number list (page 72).
L The unit can only store a name of up to 10
characters long.
L To edit a name or number, see page 33.
L If caller information does not include the
caller’s name, enter the name manually. See
the instructions on page 32.
L If you assign an item to a station key which
already contains an item, the previous item
will be replaced.
L If you use stations 1–3 as broadcast keys,
you cannot store caller information for
stations 1–3 (page 39).
FL611-PFQX2072ZA-en.book Page 37 Thursday, December 21, 2006 11:10 AM
4. Fax
4 Fax
Sending
Faxes
4.1 Sending a fax manually
1
– “STANDARD”: For printed or typewritten
documents with normal-sized characters.
– “FINE”: For documents with small print.
– “SUPER FINE”: For documents with very
small print. This setting is effective only when
the other party has a compatible fax
machines.
– “PHOTO”: For documents containing
photographs, shaded drawings, etc.
– “PHOTO WITH TEXT”: For documents
containing photographs and text.
L Using the “FINE”, “SUPER FINE”, “PHOTO”
and “PHOTO WITH TEXT” settings will
increase transmission time.
L If the resolution setting is changed during
feeding, it will be effective from the next page.
{MONITOR}
{STOP}
{REDIAL/PAUSE}
{FAX START}
{SET}
{RESOLUTION}
{QUICK SCAN START}
1
Adjust the width of the document guides (1)
to fit the actual size of the document.
2
Insert the document (up to 20 pages) FACE
DOWN until a single beep is heard and the
unit grasps the document.
L If the document guides are not adjusted
to fit the document, re-adjust them.
3
If necessary, press {RESOLUTION}
repeatedly to select the desired resolution.
4
5
6
Press {MONITOR}.
Dial the fax number.
To redial the last number
1. Press {REDIAL/PAUSE}.
2. Press {FAX START}.
L If the line is busy, the unit will automatically
redial the number.
L To cancel redialing, press {STOP}, then
press {SET}.
To send more than 20 pages at a time
Insert the first 20 pages of the document. Add
the other pages (up to 20 at a time) on top of the
previously inserted pages before the last page
feeds into the unit.
To predial a fax number
You can dial the fax number first before inserting
the document. This is convenient if you need to
refer to the document for the other party’s fax
number.
1. Enter the fax number.
2. Insert the document.
3. Press {FAX START}.
When a fax tone is heard:
Press {FAX START}.
When the other party answers your call:
Lift the handset and ask them to press their
start button. When the fax tone is heard,
press {FAX START}.
Note:
L After pressing {FAX START}, you can
replace the handset.
To select the resolution
Select the desired resolution according to the
type of document.
Sending from memory (Quick scan feature)
You can scan the document into memory before
sending.
1. Insert the document.
2. Enter the fax number.
3. Press {QUICK SCAN START}.
Transmitting reservation (Dual Access)
feature
You can send the document even when the unit
is just receiving a fax or sending a fax from
memory (up to 3 reservations).
37
FL611-PFQX2072ZA-en.book Page 38 Thursday, December 21, 2006 11:10 AM
4. Fax
1. Insert the document during fax reception or
fax memory transmission.
Maximum document size
600 mm
(23 5/8")
2. Enter the fax number using the dial keypad,
one-touch dial or navigator directory.
3. Press {QUICK SCAN START} or {FAX
START}.
L The document will be fed into the unit and
scanned into memory. The unit will then send
the data. If the document exceeds the
memory capacity, transmission will be
canceled. You must send the entire
document manually.
216 mm
(8 1/2")
Effective scanning area
L Shaded area will be scanned.
To stop transmission
Press {STOP}.
4 mm
Printing a sending report
A sending report provides you with a printed
record of transmission results. To print sending
reports, make sure feature #04 is activated
(page 49). For an explanation of error messages,
see page 54.
4 mm
4 mm
4 mm(5/32")
208 mm(8 3/16")
Printing a journal report
A journal report provides you with a printed
record of the 30 most recent faxes. To print
manually, see page 72. To print automatically
after every 30 new fax transmissions and
receptions, make sure feature #22 is activated
(page 50). For an explanation of error messages,
see page 54.
4.2 Documents you can
send
128 mm
(5")
Minimum document size
128 mm
(5")
38
216 mm(8 1/2")
Document weight
L Single sheet:
45 g/m2 to 90 g/m2 (12 lb. to 24 lb.)
L Multiple sheets:
60 g/m2 to 80 g/m2 (16 lb. to 21 lb.)
Note:
L Remove clips, staples or other fasteners.
L Do not send the following types of
documents: (Make a copy of the document
and send the copy.)
– Chemically treated paper such as carbon
or carbonless duplicating paper
– Electrostatically charged paper
– Badly curled, creased or torn paper
– Paper with a coated surface
– Paper with a faint image
– Paper with printing on the opposite side
that can be seen through the other side,
such as newsprint
L Check that ink, paste or correction fluid has
dried completely.
L To send a document with a width of less than
210 mm (81/4"), we recommend using a copy
machine to copy the original document onto
letter-sized paper, then sending the copied
document.
FL611-PFQX2072ZA-en.book Page 39 Thursday, December 21, 2006 11:10 AM
4. Fax
4.3 Sending a fax using
one-touch dial feature and
navigator directory
Before using this feature, store the desired
names and telephone numbers into one-touch
dial feature and navigator directory (page 32).
L Keep the front cover page open for button
locations.
1
Adjust the width of the document guides to fit
the actual size of the document.
2
Insert the document (up to 20 pages) FACE
DOWN until a single beep is heard and the
unit grasps the document.
L If the document guides are not adjusted
to fit the document, re-adjust them.
3
4
4.4 Broadcast
transmission
By storing one-touch dial and navigator directory
items (page 32) into the broadcast memory, you
can send the same document to multiple parties
(up to 20). Your programmed items will remain in
the broadcast memory, allowing frequent re-use.
L The broadcast function utilizes stations 1–3.
The one-touch dial function will be disabled.
L Keep the front cover page open for button
locations.
4.4.1 Programming items into
the broadcast memory
1
2
Press {DIRECTORY PROGRAM}.
Select the desired broadcast key.
If necessary, press {RESOLUTION}
repeatedly to select the desired resolution
(page 37).
For BROADCAST 1-2:
Enter the fax number.
2. Press {A} or {B} repeatedly to select
“BROADCAST”.
1. Press the desired {BROADCAST} key.
Using stations 1–11:
For MANUAL BROADCAST:
Press the desired station key.
1. Press {MANUAL BROAD}.
Using stations 12–22:
Press {LOWER}, then press the desired
station key.
Using navigator directory:
Press {<} or {>}, then press {A} or {B}
repeatedly to display the desired item and
press {FAX START}.
2. Press {A} or {B} repeatedly to select
“MANUAL BROAD”.
3
4
Program items.
Using stations 1–11:
Press the desired station key.
Using stations 12–22:
Fax auto redial
If the line is busy or if there is no answer, the unit
will automatically redial the number.
L To cancel redialing, press {STOP}, then
press {SET}.
If your unit does not send a fax
L Confirm that you have entered the number
correctly, and that the number is a fax
number.
L Confirm that the other party’s fax machine is
answering by turning ON the connecting tone
feature (feature #76, page 51).
Press {SET}.
Press {LOWER}, then press the desired
station key.
Using navigator directory:
Press {A} or {B} repeatedly to display the
desired item, and press {SET}.
Using the dial keypad (only for MANUAL
BROAD):
Enter the fax number and press {SET}.
L To program other items, repeat this step
(up to 20 items).
5
Press {SET} after programming all of the
desired items.
L To program another broadcast key,
repeat steps 2 to 5.
6
Press {STOP} to exit.
39
FL611-PFQX2072ZA-en.book Page 40 Thursday, December 21, 2006 11:10 AM
4. Fax
Note:
L If you program the wrong item, press {STOP}
after step 4 to erase the item.
L Confirm the stored items by printing a
broadcast programming list (page 72).
4.4.2 Adding a new item into the
broadcast memory
After initial programming, you can add new items
(up to a combined total of 20).
1
Press {>}.
L Confirm that there are no documents in
the document entrance.
2
Press {A} or {B} repeatedly to display the
desired broadcast memory
(“<BROADCAST1>”, “<BROADCAST2>” or
“<MANUAL BROAD>”).
3
4
5
Press {DIRECTORY PROGRAM}.
6
Press {SET}.
L To add other items, repeat steps 5 and 6
(up to 20 items).
7
Press {DIRECTORY PROGRAM} to exit.
Press {*}.
Press {A} or {B} repeatedly to display the
desired item you want to add.
Note:
L When adding new items to the MANUAL
BROADCAST memory, you can only select
stored items.
4.4.3 Erasing a stored item from
the broadcast memory
1
Press {>}.
L Confirm that there are no documents in
the document entrance.
2
Press {A} or {B} repeatedly to display the
desired broadcast memory
(“<BROADCAST1>”, “<BROADCAST2>” or
“<MANUAL BROAD>”).
3
4
5
Press {DIRECTORY PROGRAM}.
6
7
Press {SET}.
40
Press {#}.
Press {A} or {B} repeatedly to display the
desired item you want to erase.
L To cancel erasing, press {STOP}.
Press {SET}.
L To erase other items, repeat steps 5 to 7.
8
Press {DIRECTORY PROGRAM} to exit.
4.4.4 Sending the same
document to pre-programmed
parties
1
2
Insert the document FACE DOWN.
3
Press the desired {BROADCAST} (1-2) or
{MANUAL BROAD}.
L The document will be fed into the unit and
scanned into memory. The unit will then
send the data to each party, calling each
number sequentially.
L After transmission, the stored document
will be erased from memory
automatically, and the unit will
automatically print a report (broadcast
sending report).
If necessary, press {RESOLUTION}
repeatedly to select the desired resolution
(page 37).
Note:
L If you select “FINE”, “SUPER FINE”,
“PHOTO” or “PHOTO WITH TEXT”
resolution, the number of pages that the unit
can send will decrease.
L If the document exceeds the memory
capacity, sending will be canceled.
L If a party is busy or does not answer, it will be
skipped and redialed later.
To cancel broadcast transmission
1. Press {STOP} while “BROADCASTING” is
displayed.
L The display will show “SEND
CANCELED?”.
2. Press {SET}.
FL611-PFQX2072ZA-en.book Page 41 Thursday, December 21, 2006 11:10 AM
4. Fax
Receiving Faxes
4.5 Receiving a fax
manually – Auto answer
OFF
4.5.1 Activating TEL mode
Set the fax machine to TEL mode by pressing
{AUTO ANSWER} repeatedly to display the
following.
TEL MODE
L The {AUTO ANSWER} light is OFF.
To stop receiving
Press {STOP}.
How to receive faxes with an extension
telephone
If you have another telephone connected to the
same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the
handset of the extension telephone.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {*} {#} {9} (default fax activation
code) firmly.
L The fax machine will start reception.
3. Replace the handset.
Note:
L To receive fax documents using the
extension telephone, make sure remote fax
activation is turned ON (feature #41 on page
50) beforehand. The default setting is ON.
{STOP}
{FAX START}
How to receive phone calls and faxes
1. Lift the handset to answer the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {FAX START}.
CONNECTING.....
3. Replace the handset.
L The unit will start fax reception.
L If you do not answer the call within 10
rings, the unit will temporarily switch to fax
reception. The other party can then send
a fax.
41
FL611-PFQX2072ZA-en.book Page 42 Thursday, December 21, 2006 11:10 AM
4. Fax
4.6 Receiving a fax
automatically – Auto
answer ON
4.6.1 Activating FAX ONLY mode
1
Press {AUTO ANSWER} repeatedly to
display the following.
FAX ONLY MODE
3 RINGS
[±]
L The display will show the ring setting in
FAX ONLY mode.
L The {AUTO ANSWER} light is ON.
2
If you wish to change the ring setting, press
{A} or {B} repeatedly to display the desired
setting, and press {SET}.
4.7 Junk fax prohibitor
(preventing fax reception
from undesired callers)
If you subscribe to Caller ID service, this feature
prevents fax reception from calls that do not
show caller information.
Additionally, you can store undesirable phone
numbers in the junk fax prohibitor list; faxes sent
from these phone numbers will not be received
by your fax machine.
L Keep the front cover page open for button
locations.
Important:
L This feature does not work when:
– the unit is set to the TEL mode, or
– manual reception is performed.
4.7.1 Activating the junk fax
prohibitor
1
Press {MENU} repeatedly to display “JUNK
FAX PROH.”.
2
3
4
5
Press {>}.
Press {A} or {B} repeatedly to select “ON”.
Press {SET}.
Press {MENU} to exit.
L While the junk fax prohibitor is activated,
“JUNK FAX ON” is displayed.
4.7.2 Storing undesired callers
You can register up to 10 undesired numbers
from the Caller ID list (page 34) if you do not wish
to receive faxes from them.
{A}{B}
1
Press {MENU} repeatedly to display “JUNK
FAX PROH.”.
2
Press {>} repeatedly to display “JUNK
LIST SET”.
3
4
Press {SET}.
{SET}
How faxes are received
When receiving calls, the unit will automatically
answer all calls and only receive fax documents.
42
Press {A} or {B} repeatedly to display the
party you wish to prevent fax reception from.
5
Press {SET}.
L To program other parties, repeat steps 4
to 5.
6
Press {STOP} to exit the program.
FL611-PFQX2072ZA-en.book Page 43 Thursday, December 21, 2006 11:10 AM
4. Fax
Note:
L If there is no space to store new items, “LIST
FULL” is displayed in step 3 or step 5. Erase
unnecessary items.
To display the junk fax prohibitor list
1. Press {MENU} repeatedly to display “JUNK
FAX PROH.”.
2. Press {>} repeatedly to display “JUNK
LIST DISP.”.
3. Press {SET}.
4. Press {A} or {B} to display the items on the
list.
5. Press {MENU} to exit the program.
To print the junk fax prohibitor list
1. Press {MENU} repeatedly to display “JUNK
FAX PROH.”.
2. Press {>} repeatedly to display “JUNK
LIST PRINT”.
3. Press {SET}.
4. Press {MENU} to exit the list.
To erase an item from the junk fax
prohibitor list
1. Press {MENU} repeatedly to display “JUNK
FAX PROH.”.
2. Press {>} repeatedly to display “JUNK
LIST DISP.”.
3. Press {SET}.
4. Press {A} or {B} repeatedly to display the
desired item.
5. Press {<}.
L To cancel erasing, press {STOP}, then
press {MENU}.
6. Press {SET}.
L The item is erased.
L To erase other items, repeat steps 4 to 6.
7. Press {MENU} to exit the list.
43
FL611-PFQX2072ZA-en.book Page 44 Thursday, December 21, 2006 11:10 AM
5. Distinctive Ring
5 Distinctive
Distinctive
Ring
Ring
5.1 Distinctive Ring
service from your phone
company
This service is convenient if you wish to have a
different number for your fax machine and
telephone, even when you use them on a single
telephone line.
Distinctive Ring is a service offered by your local
telephone company which allows you to use
several telephone numbers on one telephone
line. When a call is made to one of your phone
numbers, the telephone company sends a ring
pattern to your telephone line to indicate which
number the call is intended for. By setting up this
unit for Distinctive Ring, you can make the fax
machine automatically start fax reception when
a call comes to the fax number.
To use this service, you must subscribe to
the Distinctive Ring service offered by your
local telephone company.
5.2 Using two or more
phone numbers on a
single telephone line
5.2.1 Activating the Distinctive
Ring feature
How phone calls and faxes are received
If the incoming call is for the fax number, the fax
machine will ring with the assigned ring pattern
and automatically start fax reception.
If the incoming call is for the phone number, the
fax machine will keep on ringing.
5.3 Using three or more
phone numbers on a
single telephone line
You may wish to use three or more phone
numbers for a single telephone line. In order to
distinguish which number the call was
addressed to, a different ring pattern must be
assigned for each number.
Example: Using three phone numbers
Telephone
number
Ring pattern
Use
012 1234
Standard
ring
Personal
012 5678
Double ring
Business
012 9876
Triple ring
Fax
To use one phone number for the fax, program
the ring pattern assigned for the fax in feature
#32 (page 45). In the example, the ring pattern
assigned for fax is a triple ring, so you should
program “C” (triple ring).
Ring pattern
Settings in
feature #32
Standard ring (one long
ring)
“A”
1st ring
{MENU}
{SET}
2nd ring
Double ring (two short rings)
“B”
{A}{B}
1
2
3
4
5
Press {MENU}.
Press {#}, then {3}{1}.
1st ring
Press {A} or {B} repeatedly to select “ON”.
Triple ring (short-long-short
rings)
Press {SET}.
Press {MENU} to exit.
1st ring
44
2nd ring
2nd ring
“C”
FL611-PFQX2072ZA-en.book Page 45 Thursday, December 21, 2006 11:10 AM
5. Distinctive Ring
Ring pattern
Settings in
feature #32
Other triple ring (shortshort-long rings)
“D”
1st ring
2nd ring
5.4 Programming the ring
pattern assigned for fax
L Keep the front cover page open for button
locations.
1
2
3
4
Set feature #31 to “ON” (page 44).
5
6
Press {SET}.
Press {MENU}.
Press {#}, then {3}{2}.
Press {A} or {B} repeatedly to select the
ring pattern assigned for fax.
“A”: Standard ring (one long ring)
“B”: Double ring (two short rings)
“C”: Triple ring (short-long-short-rings)
“D”: Other triple ring (short-short-long rings)
“B-D” (default): The fax will respond to calls
with any of ring tone patterns “B”, “C” and
“D”
Press {MENU} to exit.
45
FL611-PFQX2072ZA-en.book Page 46 Thursday, December 21, 2006 11:10 AM
6. Copy
6 Copy
Copying
6.1 Making a copy
1
– “PHOTO”: For documents containing
photographs, shaded drawings, etc.
– “PHOTO WITH TEXT”: For documents
containing photographs and text.
L If you select “STANDARD”, copying will be
done using “FINE” mode.
To stop copying
Press {STOP}.
6.1.1 More copying features
{A}{B} {COLLATE}
{STOP}
{COPY START}
{RESOLUTION}
1
2
Adjust the width of the document guides (1)
to fit the actual size of the document.
Insert the document (up to 20 pages) FACE
DOWN until a single beep is heard and the
unit grasps the document.
L If the document guides are not adjusted
to fit the document, re-adjust them.
3
If necessary, press {RESOLUTION}
repeatedly to select the desired resolution.
4
Press {COPY START}.
L If necessary, enter the number of copies
(up to 99).
5
Press {COPY START}, or wait for 20
seconds.
L The unit will start copying.
Note:
L Any document which can be sent as a fax can
also be copied (page 38).
To select the resolution
Select the desired resolution according to the
type of document.
– “FINE”: For printed or typewritten
documents with small print.
– “SUPER FINE”: For documents with very
small print.
46
To enlarge a document
1. Insert the document, then press {COPY
START}.
2. Press {A} repeatedly to select from “105%”
to “200%” by changing the enlargement rate
5% at a time.
3. Press {COPY START}.
L The unit will only enlarge the center of the
upper part of the document. To make an
enlarged copy of the bottom of the
document, turn the document around,
and then make a copy.
Example: 150% enlarged copy
Original document
A B
Enlarged copy
A B
C D
C D
To reduce a document
1. Insert the document, then press {COPY
START}.
2. Press {B} repeatedly to select from “50%” to
“95%” by changing the reduction rate 5% at a
time.
3. Press {COPY START}.
Example: 70% reduced copy
Original document
A B
Reduced copy
A B
C D
C D
FL611-PFQX2072ZA-en.book Page 47 Thursday, December 21, 2006 11:10 AM
6. Copy
To collate multiple copies
The unit can collate multiple copies in the same
order as the original document pages.
1. Insert the document, then press {COLLATE}
repeatedly to display “COLLATE=ON”.
2. Enter the number of copies (up to 99).
3. Press {COPY START}.
Example: Making 2 copies of a 4-page
original document
4
3
4
2
4
1
3
3
2
4
2
3
1
2
1
Collated pages
1
Uncollated pages
Note:
L The unit will store the documents into
memory while collating the copies. If memory
becomes full while storing, the unit will only
print out the stored pages.
L After copying, the collating feature will turn
OFF automatically.
47
FL611-PFQX2072ZA-en.book Page 48 Thursday, December 21, 2006 11:10 AM
7. Programmable Features
L The setting you selected is set, and the
next feature will be displayed.
7 Programmable
Features
Summary
Features
7.1 Programming
7
To exit programming, press {MENU}.
Note:
L To exit programming, press {MENU} at any
time.
{MENU}
{SET}
{<}{>}{A}{B}
7.1.1 Programming basic
features
1
2
Press {MENU}.
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L The current setting of the feature will be
displayed.
3
Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
4
Press {SET}.
L The setting you selected is set, and the
next feature will be displayed.
5
To exit programming, press {MENU}.
7.1.2 Programming advanced
features
1
2
3
4
Press {MENU}.
Press {<} or {>} repeatedly to display
“ADVANCE SETTINGS”.
Press {SET}.
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L The current setting of the feature will be
displayed.
5
Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
6
Press {SET}.
48
To program by entering the program code
number directly
You can select a feature by directly entering the
program code (# and a 2-digit number) instead of
using {<} or {>}.
1. Press {MENU}.
2. Press {#} and the 2-digit code (page 49 to
page 51).
3. Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
4. Press {SET}.
5. To exit programming, press {MENU}.
FL611-PFQX2072ZA-en.book Page 49 Thursday, December 21, 2006 11:10 AM
7. Programmable Features
7.2 Basic features
Code #00: Setting the Quick Setup
QUICK SETUP
PRESS SET
See page 19 for details.
Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
answering machine remotely by pressing this ID
to retrieve recorded voice messages.
1. Press {MENU}.
2. Press {#} then {1}{2}.
3. Press {A} or {B} repeatedly to select “ON”.
4. Press {SET}.
5. Enter your ID from 1 to 5 digits, using 0–9,
{*} and {#}.
L The default ID is “11”.
6. Press {SET}.
7. Press {MENU}.
See page 28 for details.
Code #13: Setting the dialing mode
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 29 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 30 for details.
Code #04: Printing a sending report
SENDING REPORT
MODE=ERROR
[±]
To print a sending report for fax transmission
results (page 38).
“ERROR” (default): A sending report will be
printed only when fax transmission fails.
“ON”: A sending report will be printed after every
transmission.
“OFF”: Sending reports will not be printed.
DIALING MODE
MODE=TONE
[±]
If you cannot dial, change this setting depending
on your telephone line service.
“TONE” (default): For tone dial service.
“PULSE”: For rotary pulse dial service.
Code #16: Setting the recording paper size
PAPER SIZE
=LETTER
[±]
“LETTER” (default): Letter size paper.
“LEGAL”: Legal size paper.
“A4”: A4 size paper.
Code #17: Setting the ringer pattern
RINGER PATTERN
MODE=A
[±]
You can select “A” (default), “B” or “C”.
Code #06: Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=3
[±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select “1”, “2”, “3” (default), “4” or “5
EXT.TAM” (External Telephone Answering
Machine).
Code #12: Enabling remote operation for an
answering machine
REMOTE TAM ACT.
MODE=OFF
[±]
If you are using the unit with an answering
machine, activate this feature, and program the
remote activation ID. You can access the
49
FL611-PFQX2072ZA-en.book Page 50 Thursday, December 21, 2006 11:10 AM
7. Programmable Features
8. Press {SET}.
7.3 Advanced features
9. Enter the transmission start time.
L Press {*} repeatedly to select “AM” or
“PM”.
Code #22: Setting the journal report to print
automatically
10. Press {SET}.
AUTO JOURNAL
MODE=ON
[±]
“ON” (default): The unit will print a journal report
automatically after every 30 new fax
transmissions and receptions (page 38).
“OFF”: The unit will not print a journal report, but
will keep a record of the last 30 fax transmissions
and receptions.
Code #23: Sending documents overseas
OVERSEAS MODE
MODE=ERROR
[±]
If you cannot send a fax overseas even if the
number is correct and the line is connected,
activate this feature before sending the fax.
This feature improves the reliability by reducing
the transmission speed.
“NEXT FAX”: This setting is effective only for the
next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
“ERROR” (default): When the previous fax
transmission fails and you wish to re-send the
document.
“OFF”: Deactivates this feature.
Note:
L This feature is not available for broadcast
transmission.
L Calling charges may be higher than usual.
Code #25: Sending a fax at a specific time
DELAYED SEND
MODE=OFF
[±]
This feature allows you to take advantage of lowcost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1. Insert the document.
2. If necessary, press {RESOLUTION}
repeatedly to select the desired resolution
(page 37).
3. Press {MENU}.
4. Press {#} then {2}{5}.
5. Press {A} or {B} repeatedly to select “ON”.
6. Press {SET}.
7. Enter the fax number.
50
L To cancel after programming, press {STOP}
then {SET}.
Code #26: Setting the Caller ID list to be
printed automatically
AUTO CALL. LIST
MODE=ON
[±]
“ON” (default): The unit will print the Caller ID list
automatically after every 30 new calls (page 34).
“OFF”: The unit will not print the Caller ID list, but
will keep records of the information for the last 30
callers.
Code #31: Activating the Distinctive Ring
feature
DISTINCTIVE RING
MODE=OFF
[±]
See page 44 for details.
Code #32: Setting the ring pattern for fax
(Distinctive Ring feature)
FAX RING PATTERN
RING=B–D
[±]
See page 45 for details.
Code #37: Receiving other size documents
AUTO REDUCTION
MODE=ON
[±]
To receive a fax document that is longer than
your recording paper.
“ON” (default): The unit will fit received
documents onto your recording paper.
“OFF”: The unit will print the original size.
Code #39: Changing the display contrast
LCD CONTRAST
MODE=NORMAL [±]
“NORMAL” (default): For normal contrast.
“DARKER”: Used when the display contrast is too
light.
Code #41: Changing the fax activation code
FAX ACTIVATION
MODE=ON
[±]
If you wish to use an extension telephone to
receive faxes, activate this feature and program
the activation code.
FL611-PFQX2072ZA-en.book Page 51 Thursday, December 21, 2006 11:10 AM
7. Programmable Features
1. Press {MENU}.
6. Press {SET}.
use these tones to confirm the status of the other
party’s machine.
“ON” (default): You will hear connecting tones.
“OFF”: Deactivates this feature.
L If the ring back tone continues, the other
party’s machine may not be a fax machine or
may have run out of paper. Check with the
other party.
L The connecting tone volume cannot be
adjusted.
7. Press {MENU}.
Code #79: Setting toner save feature
2. Press {#}, then {4}{1}.
3. Press {A} or {B} repeatedly to select “ON”.
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0–9,
{*} and {#}.
L The default code is “;#9”.
L Do not enter “0000”.
Code #44: Setting the memory reception alert
RECEIVE ALERT
MODE=ON
[±]
To alert you with a beeping sound when a
received fax document is stored into memory
due to some existing problem.
The slow beeps will continue until you clear the
printing problem and make sure the unit is
supplied with enough paper to print the stored
document.
“ON” (default): You will be alerted to a reception
problem by a beeping sound.
“OFF”: Deactivates this feature.
Code #46: Setting friendly reception
FRIENDLY RCV
MODE=ON
[±]
To receive a fax automatically when you answer
a call and hear a fax calling tone (slow beep).
“ON” (default): You do not have to press {FAX
START} for fax reception.
“OFF”: You have to press {FAX START} for fax
reception.
TONER SAVE
MODE=OFF
[±]
“ON”: The toner cartridge will last longer.
“OFF” (default): Deactivates this feature.
Note:
L This feature may lower the print quality by
reducing toner consumption.
Code #80: Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO
[±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {A} or {B} repeatedly to select “YES”.
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
Code #68: Setting the Error Correction Mode
(ECM)
ECM SELECTION
MODE=ON
[±]
This feature is available when the
transmitting/receiving fax machines are ECM
compatible.
“ON” (default): To send a fax even if there is
static interference on the telephone line.
“OFF”: Deactivates this feature.
Code #76: Setting the connecting tone
CONNECTING TONE
MODE=ON
[±]
If you often have trouble when sending faxes,
this feature allows you to hear connecting tones:
fax tone, ring back tone and busy tone. You can
51
FL611-PFQX2072ZA-en.book Page 52 Thursday, December 21, 2006 11:10 AM
7. Programmable Features
7.4 Direct commands for
programming features
{#}{1}{2} Remote activation ID
– {1}:“ON”
– {2}:“OFF” (default)
L If you select “ON”, then enter your ID from 1
to 5 digits using 0-9, {*} and {#}.
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 49 to
page 51.
{#}{1}{3} Dialing mode
– {1}:“PULSE”
– {2}:“TONE” (default)
1
2
3
{#}{1}{6} Paper size
– {1}:“LETTER” (default)
– {2}:“A4”
– {3}:“LEGAL”
4
5
Press {MENU}.
Press {#} and the 2-digit code number.
Press the desired direct command to display
the desired setting.
L This step may be slightly different
depending on the feature.
Press {SET}.
To exit programming, press {MENU}.
7.4.1 Program code and direct
command button
{#}{0}{0} Quick Setup
– {1}: “FAX ONLY” (default)
– {2}: “DIST. RING”
– {3}: “EXT. TAM”
– {4}: “TEL ONLY”
L Press {SET} before pressing the direct
command button.
{#}{0}{1} Date and time
L Enter the date and time using the dial
keypad. See page 28 for details.
{#}{0}{2} Your logo
L Enter your logo using the dial keypad. See
page 29 for details.
{#}{0}{3} Your fax number
L Enter your fax number using the dial keypad.
See page 30 for details.
{#}{0}{4} Sending report
– {1}:“ON”
– {2}:“OFF”
– {3}:“ERROR” (default)
{#}{0}{6} FAX ring count
– {1}:“1”
– {2}:“2”
– {3}:“3” (default)
– {4}:“4”
– {5}:“5 EXT.TAM”
52
{#}{1}{7} Ringer pattern
– {1}:“A” (default)
– {2}:“B”
– {3}:“C”
{#}{2}{2} Automatic journal report
– {1}:“ON” (default)
– {2}:“OFF”
{#}{2}{3} Overseas mode
– {1}:“NEXT FAX”
– {2}:“OFF”
– {3}:“ERROR” (default)
{#}{2}{5} Delayed send
– {1}:“ON”
– {2}:“OFF” (default)
L If you select “ON”, next enter the fax number
and transmission time using the dial keypad
(see feature #25 on page 50 for details).
{#}{2}{6} Automatic Caller ID list
– {1}:“ON” (default)
– {2}:“OFF”
{#}{3}{1} Distinctive Ring
– {1}:“ON”
– {2}:“OFF” (default)
{#}{3}{2} Fax ring pattern
– {1}:“A”
– {2}:“B”
– {3}:“C”
– {4}:“D”
– {5}:“B-D” (default)
{#}{3}{7} Auto reduction
– {1}:“ON” (default)
– {2}:“OFF”
{#}{3}{9} Display contrast
– {1}:“NORMAL” (default)
FL611-PFQX2072ZA-en.book Page 53 Thursday, December 21, 2006 11:10 AM
7. Programmable Features
– {2}:“DARKER”
{#}{4}{1} Fax activation code
– {1}:“ON” (default)
– {2}:“OFF”
L If you select “ON”, next enter your code from
2 to 4 digits using 0-9, {*} and {#}.
{#}{4}{4} Memory reception alert
– {1}:“ON” (default)
– {2}:“OFF”
{#}{4}{6} Friendly reception
– {1}:“ON” (default)
– {2}:“OFF”
{#}{6}{8} ECM selection
– {1}:“ON” (default)
– {2}:“OFF”
{#}{7}{6} Connecting tone
– {1}:“ON” (default)
– {2}:“OFF”
{#}{7}{9} Toner save
– {1}:“ON”
– {2}:“OFF” (default)
{#}{8}{0} Set default
– {1}:“YES”
– {2}:“NO” (default)
L If you select “YES”, press {SET} 2 times,
then press {MENU} to exit.
53
FL611-PFQX2072ZA-en.book Page 54 Thursday, December 21, 2006 11:10 AM
8. Help
8 Help
8For
Error
Fax
Messages
Advantage assistance, call 1-800-435-7329.
8.1 Error messages –
Reports
If a problem occurs during fax transmission or
reception, one of the following messages will be
printed on the sending and journal reports (page
38).
COMMUNICATION ERROR
(Code: 40-42, 46-72, FF)
L A transmission or reception error occurred.
Try again or check with the other party.
COMMUNICATION ERROR
(Code: 43, 44)
L A line problem occurred. Connect the
telephone line cord to a different jack and try
again.
L An overseas transmission error occurred. Try
using the overseas mode (feature #23, page
50).
DOCUMENT JAMMED
L The document is jammed. Remove the
jammed document (page 66).
ERROR-NOT YOUR UNIT
(Code: 54, 59, 70)
L A transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.
JUNK FAX PROH. REJECT
L The junk fax prohibitor feature of this unit
rejected fax reception.
MEMORY FULL
L The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 16)
or clear the jammed paper (page 64).
NO DOCUMENT
L The document was not fed into the unit
properly. Re-insert it and try again.
OTHER FAX NOT RESPONDING
L The other party’s fax machine is busy or has
run out of recording paper. Try again.
L The other party’s fax machine rings too many
times. Send the fax manually (page 37).
L The other party’s machine is not a fax
machine. Check with the other party.
L The number you dialed is not in service.
PRESSED THE STOP KEY
L {STOP} was pressed and fax communication
was canceled.
54
THE COVER WAS OPENED
L The front cover was opened. Close it and try
again.
OK
L Fax transmission or reception was
successful.
8.2 Error messages –
Display
If the unit detects a problem, one or more of the
following messages will appear on the display.
—————————————————————
CALL SERVICE
L There is something wrong with the unit.
Contact our service personnel.
—————————————————————
CHANGE DRUM
b
CHANGE SUPPLIES
L There is something wrong with the drum unit.
Replace the drum unit and the toner cartridge
(page 61).
—————————————————————
CHECK DOCUMENT
L The document was not fed into the unit
properly. Re-insert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 67) and try
again.
—————————————————————
CHECK DRUM
L The drum unit is not inserted properly. Reinsert it correctly (page 12).
—————————————————————
CHECK MEMORY
L The memory (telephone numbers,
parameters, etc.) has been erased. Reprogram.
—————————————————————
COVER OPEN
L The front cover is open. Close it.
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 55 Thursday, December 21, 2006 11:10 AM
8. Help
—————————————————————
DIRECTORY FULL
L There is no space to store new items in
navigator directory. Erase unnecessary items
(page 33).
—————————————————————
DRUM LIFE OVER
REPLACE DRUM
unit. Press {STOP} to clear the message.
Divide the document into sections.
—————————————————————
MODEM ERROR
L There is something wrong with the unit’s
modem. Contact our service personnel.
—————————————————————
NO FAX REPLY
b
CHANGE SUPPLIES
L The drum life is complete. Replace the drum
unit immediately (page 61).
—————————————————————
FAILED PICK UP
L Recording paper was not fed into the unit
properly. Re-insert the recording paper (page
66).
—————————————————————
L The other party’s fax machine is busy or has
run out of recording paper. Try again.
—————————————————————
OUT OF PAPER
L Recording paper is not installed or the unit
has run out of paper. Install paper (page 16).
L Recording paper is not fed into the unit
properly. Reinstall paper (page 16).
—————————————————————
PAPER JAMMED
FAX IN MEMORY
L The unit has a document in memory. See the
other displayed message instructions to print
out the document. For fax memory capacity,
see page 73.
—————————————————————
FAX MEMORY FULL
L The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 16)
or clear the jammed paper (page 64).
L When performing memory transmission, the
document being stored exceeded the
memory capacity of the unit. Send the entire
document manually.
—————————————————————
LOW TEMP.
L The inside of the unit is extremely cold and
cannot be operated. Use the unit in a warmer
area. While the unit cannot be operated, the
received documents are temporarily stored
into the memory, and will be printed out
automatically when the unit warms up.
—————————————————————
L A recording paper jam occurred. Clear the
jammed paper (page 64).
—————————————————————
PLEASE WAIT
L The unit is warming up. Wait for a while.
—————————————————————
REDIAL TIME OUT
L The other party’s fax machine is busy or has
run out of recording paper. Try again.
—————————————————————
REMOVE DOCUMENT
L The document is jammed. Remove the
jammed document (page 66).
L Attempted to send a document longer than
600 mm (235/8"). Press {STOP} to remove
the document. Divide the document into two
or more sheets and try again.
—————————————————————
REPLACE DRUM
SOON
L The drum life is near to an end. Replace the
drum unit as soon as possible (page 61).
MEMORY FULL
L When making a copy, the document being
stored exceeded the memory capacity of the
For Fax Advantage assistance, call 1-800-435-7329.
55
FL611-PFQX2072ZA-en.book Page 56 Thursday, December 21, 2006 11:10 AM
8. Help
—————————————————————
TONER EMPTY
b
CHANGE SUPPLIES
L The toner life is complete. Replace the toner
cartridge immediately (page 61).
—————————————————————
TONER LOW
b
CHANGE SUPPLIES
L The toner life is near to an end. Replace the
toner cartridge as soon as possible (page
61).
—————————————————————
TRANSMIT ERROR
L A transmission error occurred. Try again.
—————————————————————
WARM UP
L The inside of the unit is too cold. Let the unit
warm up. Wait for a while.
—————————————————————
WRONG PAPER
L The fax message was printed on paper which
is shorter than letter size paper. Use the
appropriate size paper (page 74).
56
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 57 Thursday, December 21, 2006 11:10 AM
8. Help
Troubleshooting
8.3 When a function does not work, check here
8.3.1 Initial settings
Problem
Cause & Solution
I cannot hear a dial tone.
L If you use a splitter to connect the unit, remove the splitter and
connect the unit to the wall jack directly. If the unit operates
properly, check the splitter.
L Disconnect the unit from the telephone line and connect a known
working telephone. If the working telephone operates properly,
contact our service personnel to have the unit repaired. If the
working telephone does not operate properly, contact your
telephone company.
L The power cord or telephone line cord is not connected. Check the
connections.
L If you connected the fax machine through a computer modem,
connect the fax machine directly to a telephone line jack.
I cannot make calls.
L The dialing mode setting may be wrong. Change the setting.
(feature #13 on page 49).
The unit does not ring.
L The ringer volume is turned OFF. Adjust it (page 27).
8.3.2 General
Problem
Cause & Solution
The other party complains
they only hear a fax tone
and cannot talk.
L FAX ONLY mode is set. Tell the other party the number is only used
for faxes.
L Change to TEL mode by pressing {AUTO ANSWER}.
L If you use a Distinctive Ring service, make sure you have set the
same ring pattern assigned by the telephone company (page 44).
The {REDIAL/PAUSE}
button does not function
properly.
L If this button is pressed during dialing, a pause will be inserted. If
pressed immediately after a dial tone is obtained, the last number
dialed will be redialed.
The receiving mode does
not function properly.
L The Distinctive Ring is set (feature #31 on page 44).
During programming, I
cannot enter the code or
ID number.
L All or part of the number is the same. Change the number: feature
#12 (page 49) and #41 (page 50).
The unit beeps.
L Recording paper has run out. Press {STOP} to stop the beeps and
install paper.
Whenever I try to retrieve
my voice mail messages, I
am interrupted by the fax
tone.
L You are probably entering {*} {#} {9}. This is the default setting
for the fax activation code. If you use a voice mail service, turn the
fax activation feature OFF or reprogram the activation code
(feature #41 on page 50).
For Fax Advantage assistance, call 1-800-435-7329.
57
FL611-PFQX2072ZA-en.book Page 58 Thursday, December 21, 2006 11:10 AM
8. Help
8.3.3 Fax – sending
Problem
Cause & Solution
I cannot send documents.
L The telephone line cord is connected to the EXT jack on the unit.
Connect to the LINE jack (page 18).
L The other party’s fax machine is busy or has run out of recording
paper. Try again.
L The other party’s machine is not a fax machine. Check with the
other party.
L The other party’s fax machine failed to answer the fax
automatically. Send the fax manually (page 37).
I cannot send a fax
overseas.
L Use the overseas transmission mode (feature #23 on page 50).
L Add two pauses at the end of the telephone number or dial
manually.
The other party complains
that letters on their
received document are
distorted or not clear.
L If your line has special telephone services such as call waiting, the
service may have been activated during fax transmission. Connect
the unit to a line that does not have these services.
L Another telephone on the same line is off the hook. Hang up the
extension telephone and try again.
L Try copying the document. If the copied image is clear, there may
be something wrong with the other party’s machine.
The other party complains
that black lines, white
lines or smudges appear
on their received
document.
L The glass or rollers are dirty with correction fluid, etc. Clean them
(page 67). Please do not insert a document before correction fluid
has dried completely.
8.3.4 Fax – receiving
Problem
Cause & Solution
I cannot receive
documents.
L When you have a single telephone line and subscribe to a voice
mail service, you must also subscribe to a Distinctive Ring service
(page 44).
L The telephone line cord is connected to the EXT jack on the unit.
Connect to the LINE jack (page 18).
I cannot receive
documents automatically.
L The receiving mode is set to TEL mode. Set to FAX ONLY mode by
pressing {AUTO ANSWER}.
L The time taken to answer the call is too long. Decrease the number
of rings before the unit answers a call (feature #06 on page 49).
The display shows
“CONNECTING.....”, but
faxes are not received.
L The incoming call is not a fax. Change the receiving mode to TEL
mode by pressing {AUTO ANSWER}.
A blank sheet is ejected.
L The other party placed the document in their fax machine the
wrong way. Check with the other party.
58
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 59 Thursday, December 21, 2006 11:10 AM
8. Help
Problem
Cause & Solution
The printing quality is
poor.
L If documents can be copied properly, the unit is working normally.
The other party may have sent a faint document or there may be
something wrong with the other party’s machine. Ask them to send
a clearer copy of the document or to check their fax machine.
L Some paper has instructions recommending which side to print on.
Try turning the paper over.
L You may have used paper with a cotton and/or fiber content that is
over 20%, such as letterhead or resume paper.
L The remaining toner is low. Replace the toner cartridge (page 61).
L We recommend you replace the drum unit every fourth time you
replace the toner cartridge (page 61). To check the drum life and
quality, please print the printer test list (page 72).
L The toner save mode is ON (feature #79 on page 51).
The other party complains
that they cannot send a
document.
L The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper (page 16)
or clear the jammed paper (page 64).
L The unit is not in FAX ONLY mode. Press {AUTO ANSWER}
repeatedly to turn ON the {AUTO ANSWER} light.
I cannot select the desired
receiving mode.
L If you want to set FAX ONLY mode:
– press {AUTO ANSWER} repeatedly to turn ON the {AUTO
ANSWER} light.
L If you want to set TEL mode:
– press {AUTO ANSWER} repeatedly to turn OFF the {AUTO
ANSWER} light.
L The Distinctive Ring of feature #31 is activated (page 44).
8.3.5 Copying
Problem
Cause & Solution
The unit will not make a
copy.
L You cannot make a copy during programming. Make the copy after
programming.
L The document was not fed into the unit properly. Re-insert the
document.
L Recording paper is not installed or the unit has run out of paper.
Install paper (page 16).
A black line, a white line or
smudge appears on the
copied document.
L The glass or rollers are dirty with correction fluid, etc. Clean them
(page 67). Please do not insert a document before correction fluid
has dried completely.
For Fax Advantage assistance, call 1-800-435-7329.
59
FL611-PFQX2072ZA-en.book Page 60 Thursday, December 21, 2006 11:10 AM
8. Help
Problem
Cause & Solution
The printing quality is
poor.
Original
Copy
ABC
L Some paper has instructions recommending which side to print on.
Try turning the paper over.
L You may have used paper with a cotton and/or fiber content that is
over 20%, such as letterhead or resume paper.
L The remaining toner is low. Replace the toner cartridge (page 61).
L We recommend you replace the drum unit every fourth time you
replace the toner cartridge (page 61). To check the drum life and
quality, please print the printer test list (page 72).
L The toner save mode of feature #79 is ON (page 51).
8.3.6 Using an answering machine
Problem
Cause & Solution
I cannot receive
documents automatically.
L Your greeting message on the answering machine is too long.
Shorten the message. Record a message up to 10 seconds long.
L The answering machine rings too many times. Set to 1 or 2 rings.
I cannot receive voice
messages.
L Check if the answering machine is turned ON and connected to the
fax machine properly (page 23).
L Set the number of rings on the answering machine to 1 or 2.
I cannot retrieve recorded
voice messages on the
answering machine from
a remote location.
L You did not program your remote access code into your fax
machine correctly. Program the same code that is programmed on
the answering machine on the fax machine with feature #12 (page
49).
I pressed the remote
access code to access the
answering machine
remotely, but the line was
disconnected.
L The code may include “#” which is used for certain features
provided by telephone companies. Change the code on the
answering machine to another number which does not include “#”.
Also change the code of the fax machine with feature #12 (page
49).
Callers complain that they
cannot send a document.
L Your answering machine has run out of recording tape. Rewind the
tape to record messages.
L You set the answering machine to only give a greeting message.
8.3.7 If a power failure occurs
L The unit will not function.
L The unit is not designed for making emergency telephone calls when the power fails. Alternative
arrangements should be made for access to emergency services.
L Fax transmission and reception will be interrupted.
L If any fax documents are stored in the memory, they will be lost. When power is restored, a power
down report will be printed stating which documents in memory have been erased.
60
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 61 Thursday, December 21, 2006 11:10 AM
8. Help
Replacement
1
Before opening the protection bag of the new
toner cartridge, shake it vertically more than
5 times.
2
Remove the new toner cartridge from the
protection bag. Peel off the seal (1) from the
toner cartridge.
8.4 Replacing the toner
cartridge and the drum
unit
When the display shows the following, replace
the toner cartridge.
TONER LOW
TONER EMPTY
We recommend you replace the drum unit
every fourth time you replace the toner
cartridge. To check the drum life and quality,
please print the printer test list (page 72). To
ensure that the unit operates properly, we
recommend the use of Panasonic toner
cartridge (Model No. KX-FA83) and drum unit
(Model No. KX-FA84). See page 10 for
accessory information.
To maintain print quality and machine life, we
recommend you to clean slots and openings
(page 4) and the inside of the unit (page 67)
when replacing the toner cartridge and/or drum
unit.
Caution:
L We cannot be responsible for any damage
to the unit or degradation of print quality
which may occur from the use of a nonPanasonic toner cartridge and drum unit.
L The drum unit contains a photosensitive
drum. Exposing it to light may damage the
drum.
Once you have opened the protection
bag:
– Do not expose the drum unit to light for
more than 5 minutes.
– Do not touch or scratch the green
drum surface.
– Do not place the drum unit near dust or
dirt, or in a high humidity area.
– Do not expose the drum unit to direct
sunlight.
L Do not unplug the fax machine. Loss of
fax documents in memory may occur.
L Do not leave the toner cartridge out of the
protection bag for a long time. It will
decrease the toner life.
L Do not add toner to the toner cartridge.
1
3
Lift open the front cover (1), holding OPEN
(2).
1
2
3
Caution:
The fuser unit (3) gets hot. Do not
touch it.
4
Tap on the used toner cartridge several times
to allow the remaining toner to fall into the
For Fax Advantage assistance, call 1-800-435-7329.
61
FL611-PFQX2072ZA-en.book Page 62 Thursday, December 21, 2006 11:10 AM
8. Help
drum unit. Remove the drum and toner unit
(1) by holding the two tabs.
6
Remove the used cartridge (1) from the
drum unit (2).
1
2
2
1
L Do not touch the transfer roller (2).
L If you replace the toner cartridge and the
drum unit at the same time, skip to step 7.
5
3
L The toner may stick to the cartridge and
the drum unit. Be careful when handling.
See page 4 for details.
L Do not drop the toner on the green drum
surface (3).
L Put the used toner cartridge into the
protection bag.
Turn the two levers (1) on the used toner
cartridge firmly, until the triangles (2) match.
7
1
If you replace the drum unit at the same time,
remove the new drum unit from the
protection bag.
Place the new toner cartridge (1) into the
drum unit (2) vertically.
1
2
2
62
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 63 Thursday, December 21, 2006 11:10 AM
8. Help
8
Firmly press down the toner cartridge to
snap into position.
11 Install the drum and toner unit (1) by holding
the tabs.
1
9
Turn the two levers (1) on the toner
cartridge firmly.
1
12 Close the front cover (1) by pushing down
on both sides, until locked.
1
10 Make sure that the triangles (1) match, to
install the toner cartridge correctly.
1
L While the unit displays “PLEASE WAIT”,
do not open the front cover, or disconnect
the power cord.
L If the lower glass (2) is dirty, clean it with
a soft and dry cloth.
Waste disposal method
Waste material should be disposed of under
conditions which meet all national and local
environmental regulations.
2
For Fax Advantage assistance, call 1-800-435-7329.
63
FL611-PFQX2072ZA-en.book Page 64 Thursday, December 21, 2006 11:10 AM
8. Help
Jams
8.5 Recording paper jam
8.5.1 When the recording paper
has jammed in the unit
When the recording paper has jammed
near the recording paper exit:
1. Pull the tension plate forward (1), then
remove the paper tray cover (2).
The display will show the following.
2
PAPER JAMMED
1
Lift open the front cover (1), holding OPEN
(2).
1
1
2. Remove the recording paper (1), then
remove the drum and toner unit (2) to
allow the jammed paper (3) to pull free
from the rear cabinet.
2
3
Caution:
The fuser unit (3) gets hot. Do not
touch it.
2
1
2
Remove the jammed paper.
When the recording paper has jammed
near the drum and toner unit:
Remove the jammed paper (1) carefully by
pulling it toward you.
3
2
3. Lift both green levers (1) forward until
they stop.
1
L Do not touch the transfer roller (2).
1
64
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 65 Thursday, December 21, 2006 11:10 AM
8. Help
4. Remove the jammed paper (1) from the
fuser unit by pulling it upwards carefully,
then install the drum and toner unit.
L Before re-inserting, make sure to fan and
straighten the recording paper.
1
1
5. Push back the levers (1) to the original
position.
5
Attach the paper tray cover (1), then push
back the tension plate (2).
1
2
1
3
Close the front cover (1) by pushing down
on both sides, until locked.
1
4
Re-insert the recording paper (1).
For Fax Advantage assistance, call 1-800-435-7329.
65
FL611-PFQX2072ZA-en.book Page 66 Thursday, December 21, 2006 11:10 AM
8. Help
8.5.2 When the recording paper
is not fed into the unit properly
The display will show the following.
FAILED PICK UP
8.6 Document jams sending
1
1
Pull the tension plate forward (1), then
remove the paper tray cover (2). Remove
the recording paper (3).
Lift open the front cover (1), holding OPEN
(2).
1
3
2
2
1
3
Caution:
The fuser unit (3) gets hot. Do not
touch it.
2
Re-insert the recording paper. Attach the
paper tray cover, then push back the tension
plate (see steps 5 to 6 on page 17).
L Before re-inserting, make sure to fan and
straighten the recording paper.
2
Hold the center part of the front cover (1),
and pull open the inner cover (2).
1
2
3
L Do not touch the transfer roller (3).
66
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 67 Thursday, December 21, 2006 11:10 AM
8. Help
3
Remove the jammed document carefully
(1).
Cleaning
8.7 Cleaning the inside of
the unit
Clean the inside of the unit when:
– Document frequently misfeed.
– Black line, a white line or a dirty pattern
appear on the original document when
sending or copying.
1
4
5
Push back the inner cover.
Close the front cover (1) by pushing down
on both sides, until locked.
1
Caution:
L Be careful when handling the drum and
toner unit.
See the caution for the drum unit on page
61 for details.
L Do not use paper products, such as paper
towels or tissues, to clean the inside of
the unit.
1
Disconnect the power cord and the
telephone line cord.
2
Lift open the front cover (1), holding OPEN
(2).
1
Note:
L Do not pull out the jammed document forcibly
before opening the front cover.
2
3
Caution:
The fuser unit (3) gets hot. Do not
touch it.
3
Clean the document separation roller (1)
with a cloth moistened with isopropyl rubbing
alcohol, and let all parts dry thoroughly.
1
For Fax Advantage assistance, call 1-800-435-7329.
67
FL611-PFQX2072ZA-en.book Page 68 Thursday, December 21, 2006 11:10 AM
8. Help
4
Hold the center part of the front cover (1),
and pull open the inner cover (2).
8
Clean the lower glass (1) with a soft and dry
cloth.
1
1
2
3
9
L Do not touch the transfer roller (3).
5
Reinstall the drum and toner unit (1) by
holding the tabs.
Clean the document feeder roller (1) with a
cloth moistened with isopropyl rubbing
alcohol, and let all parts dry thoroughly.
Clean the upper glass (2) with a soft and dry
cloth.
1
1
10 Close the front cover (1) by pushing down
2
6
7
on both sides, until locked.
Push back the inner cover.
1
Remove the drum and toner unit (1) by
holding the two tabs.
1
11 Reconnect the power cord and the telephone
line cord.
68
For Fax Advantage assistance, call 1-800-435-7329.
FL611-PFQX2072ZA-en.book Page 69 Thursday, December 21, 2006 11:10 AM
8. Help
Note:
L Do not touch the transfer roller (1).
1
For Fax Advantage assistance, call 1-800-435-7329.
69
FL611-PFQX2072ZA-en.book Page 70 Thursday, December 21, 2006 11:10 AM
9. Caller IQ Feature
9 Caller
9For
Caller
assistance,
IQIQ
Feature
Feature
please call openLCR: 1-866-openLCR (1-866-673-6527)
9.1 openLCR service for
the Caller IQ feature
This unit is compatible with service provided by
openLCR.
L If you have any questions regarding the
openLCR service, visit
www.openLCR.com or call openLCR at 1866-openLCR (1-866-6736527).
L NEITHER PANASONIC
COMMUNICATIONS CO., LTD. NOR
PANASONIC CORPORATION OF NORTH
AMERICA IS IN ANY WAY AFFILIATED
WITH, OR RESPONSIBLE FOR THE ACTS
OR OMISSIONS OF, OPENLCR.COM, INC.
NEITHER PANASONIC
COMMUNICATIONS CO., LTD. NOR
PANASONIC CORPORATION OF NORTH
AMERICA NOR ANY OF THEIR
EMPLOYEES OR AFFILIATES OR
CUSTOMERS MAKE ANY WARRANTIES
OR REPRESENTATIONS, EITHER
EXPRESS OR IMPLIED, TO ANY
CUSTOMER OR ANY OTHER THIRD
PARTY WITH RESPECT TO ANY OF THE
SERVICES PROVIDED BY
OPENLCR.COM, INC., NOR ASSUME NOR
CREATE ANY OTHER OBLIGATION OF
ANY KIND ON BEHALF OF
OPENLCR.COM, INC.
L The Caller IQ service can only be activated
after registering with openLCR at
www.openLCR.com. More information
regarding the openLCR service is available
on the Internet at www.openLCR.com.
If you do not wish to use the Caller IQ feature,
you can turn it OFF temporarily.
Note:
L Before subscribing to openLCR service, you
cannot change the following settings.
9.2 To turn the Caller IQ
ON / OFF
FLASH/LIGHT/OFF
{SET}
1
2
3
Press {CALLER IQ}.
4
Press {SET}.
L When the Caller IQ feature is turned ON,
the CALLER IQ indicator will turn ON.
L When the Caller IQ feature is turned OFF,
the CALLER IQ indicator will turn OFF.
To turn ON:
Press {1}.
To turn OFF:
Press {3}.
9.3 Updating the rate table
(downloading the rate
table)
If you register through the openLCR web site or
move to another area, you have to download the
rate table manually.
L Keep the front cover page open for button
locations.
1
2
3
4
70
Press {0}.
Press {CALLER IQ}.
Press {#}.
Press {SET}.
Follow the voice prompt to start
downloading.
For assistance, please call openLCR: 1-866-openLCR (1-866-673-6527)
FL611-PFQX2072ZA-en.book Page 71 Thursday, December 21, 2006 11:10 AM
9. Caller IQ Feature
During download
L The CALLER IQ indicator will flash and the
display will show the following.
DOWNLOADING
L While downloading, you cannot do other
operations such as making/answering calls
or sending/receiving documents.
L Depending on where you live, the call for
downloading may be a long distance call and
will take about 1-2 minutes. You will be
charged for the cost of the call.
L When the download is completed, the
CALLER IQ indicator will stop flashing but will
remain lit up and the display will show
“DOWNLOAD OK!”
L If “DOWNLOAD ERROR. TRY AGAIN.” is
displayed, the unit was unable to download
from openLCR.
Try downloading manually again.
Automatic download
The fax machine will automatically download the
latest rate table when:
– the rate table in the fax machine reaches the
expiry date; usually between 60-90 days after
last update,
– the fax machine is being polled by openLCR
service center.
To stop downloading
1. Press {STOP}.
2. Press {SET}.
9.4 Downloading
information
4
Follow the voice prompt to start
downloading.
9.5 Viewing information
L Keep the front cover page open for button
locations.
1
2
3
Press {CALLER IQ}.
Press {2}.
Press {SET}.
L The items of information which you
selected on the web are displayed.
Example:
openLCR.com
1: Weather
b
2: Stock
4
Select the desired information by pressing
the desired information number, using the
dial keypad.
5
Press {A} or {B} repeatedly to find more
information.
6
Press {CALLER IQ} to stop viewing.
9.6 Printing information
L Keep the front cover page open for button
locations.
1
2
3
Press {CALLER IQ}.
Press {1}.
Press {SET} to start printing.
This enables you to view information such as
weather, lottery results and stock quotes on the
LCD display. Each time you download the data
from openLCR, the information will be updated.
To view up-to-date information, you will need to
download the information to your unit.
If you access the openLCR web site at
www.openLCR.com and program the system
setup and phone book, you will need to
download this data to the fax machine.
L Keep the front cover page open for button
locations.
1
2
3
Press {CALLER IQ}.
Press {#}.
Press {SET}.
For assistance, please call openLCR: 1-866-openLCR (1-866-673-6527)
71
FL611-PFQX2072ZA-en.book Page 72 Thursday, December 21, 2006 11:10 AM
10. General Information
10 General
Printed
Reports
Information
10.1 Reference lists and
reports
You can print out the following lists and reports
for your reference.
Setup list:
provides you with the current settings of the
basic and advanced programming features
(page 49 to page 51).
Telephone number list:
provides you with names and numbers which are
stored in the one-touch dial feature and
navigator directory.
Journal report:
keeps records of fax transmission and reception.
This report can be printed automatically after
every 30 fax communications (feature #22 on
page 50).
Broadcast programming list:
provides you with names and numbers which are
stored in the broadcast memory (page 39).
Printer test:
allows you to check the print quality of your unit.
If the test print has a dirty pattern, or blurred
points or lines, clean the inside of the unit (page
67). If printing quality is still poor, replace the
toner cartridge and drum unit.
{MENU}
{STOP}
{<}{>}
{SET}
1
Press {MENU} repeatedly to display “PRINT
REPORT”.
2
Press {<} or {>} repeatedly to display the
desired item.
3
Press {SET} to start printing.
L To stop printing, press {STOP}.
4
Press {MENU}.
72
FL611-PFQX2072ZA-en.book Page 73 Thursday, December 21, 2006 11:10 AM
10. General Information
Specifications
10.2 Specifications
Applicable lines:
Public Switched Telephone Network
Fax memory capacity:
Approx. 120 pages of memory transmission
Approx. 170 pages of memory reception
(Based on the ITU-T No. 1 Test Chart in standard
resolution.)
Document size:
Max. 216 mm (81/2") in width, Max. 600 mm
(235/8") in length
Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm – 800 nm
Emission duration: Continuous
Effective scanning width:
208 mm (83/16")
Print speed:
Approx. 14 ppm (pages per minute)
Effective printing width:
Letter/Legal: 208 mm (83/16")
A4: 202 mm (715/16")
Printing resolution:
600 × 600 dpi
Transmission time*1:
Approx. 8 s/page (ECM-MMR)*2
Scanning density:
Horizontal: 8 pels/mm (203 pels/inch)
Vertical: 3.85 lines/mm (98 lines/inch) – in
standard resolution,
7.7 lines/mm (196 lines/inch) – in
fine/photo/photo with text resolution,
15.4 lines/mm (392 lines/inch) – in super fine
resolution
*1 Transmission speed depends upon the
contents of the pages, resolution, telephone
line conditions and capability of the other
party’s machine.
*2 Transmission speed is based upon the ITU-T
No. 1 Test Chart. If the capability of the other
party’s machine is inferior to your unit, the
transmission time may be longer.
ITU-T No.1 Test Chart
Photo resolution:
64-level
Scanner type:
Contact Image Sensor
Printer type:
Laser Printer
Data compression system:
Modified Huffman (MH), Modified READ (MR),
Modified Modified READ (MMR)
Modem speed:
14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400
bps; Automatic Fallback
Operating environment:
10 °C – 32.5 °C (50 °F – 90.5 °F), 20 % – 80 %
RH (Relative Humidity)
Dimensions:
Approx. height 370 mm × width 430 mm × depth
480 mm (149/16" × 1615/16" × 187/8")
Mass (Weight):
Approx. 9.2 kg (20.2 lb.)
Power consumption:
Standby: Approx. 3 W
Transmission: Approx. 11 W
Reception: Approx. 290 W
Copy: Approx. 290 W
Maximum: Approx. 900 W (When the fuser lamp
turns on)
Power supply:
120 V AC, 60 Hz
73
FL611-PFQX2072ZA-en.book Page 74 Thursday, December 21, 2006 11:10 AM
10. General Information
Recording paper specifications
Recording paper size:
Letter: 216 mm × 279 mm (81/2" × 11")
Legal: 216mm × 356 mm (81/2" × 14")
A4: 210 mm × 297 mm (81/4" × 1111/16")
Recording paper weight:
60 g/m2 to 90 g/m2 (16 lb. to 24 lb.)
Toner life
Toner life depends on the amount of content in a
received, copied or printed document. The
following is the approximate relationship
between image area and toner life for
replacement toner cartridge (Model No. KXFA83). Toner life varies in actual usage.
5 % image area
Note for recording paper:
L Do not use the following types of paper:
– Paper with a cotton and/or fiber content
that is over 20 %, such as letterhead
paper or paper used for resumes
– Extremely smooth or shiny paper, or
paper that is highly textured
– Coated, damaged or wrinkled paper
– Paper with foreign objects attached, such
as tabs or staples
– Paper which has dust, lint or oil stains
– Paper that will melt, vaporize, discolor,
scorch or emit dangerous fumes near
200 °C (392 °F), such as vellum paper.
These materials may transfer onto the
fusing roller and cause damage.
– Moist paper
– Inkjet paper
L Some paper only accepts print on one side.
Try using the other side of the paper if you are
not happy with the print quality or if
misfeeding occurs.
L For proper paper feeding and best print
quality, we recommend using long-grained
paper.
L Do not use paper of different types or
thickness at the same time. This may cause a
paper jam.
L Avoid double-sided printing.
L Do not use paper printed from this unit for
double-sided printing with other copiers or
printers. This may cause a paper jam.
L To avoid curling, do not open paper packs
until you are ready to use the paper. Store
unused paper in the original packaging, in a
cool and dry location.
Approx. 2,500 sheets of letter size paper can be
printed.
10 % image area
Approx. 1,200 sheets of letter size paper can be
printed.
15 % image area
Approx. 800 sheets of letter size paper can be
printed.
74
FL611-PFQX2072ZA-en.book Page 75 Thursday, December 21, 2006 11:10 AM
10. General Information
Note:
L The image area changes with the depth,
thickness and size of the characters.
L If you turn on the toner save feature, the toner
cartridge will last approx. 40% longer.
Drum life
The included drum unit or Model No. KX-FA84
can print approx. 10,000 letter-sized sheets at 20
sheets per print job, and approx. 5,000 lettersized sheets at 1 sheet per print job regardless
of the content of the image area. The actual
drum life is determined by various factors, such
as temperature, humidity and type of paper, etc.
Note:
L Design and specifications are subject to
change without notice.
L The pictures and illustrations in these
instructions may vary slightly from the actual
product.
75
FL611-PFQX2072ZA-en.book Page 76 Thursday, December 21, 2006 11:10 AM
10. General Information
FCC and Other Information
10.3 FCC and Other Information
This equipment complies with Part 68 of the FCC
rules and the requirements adopted by the ACTA.
On the rear of this equipment is a label that
contains, among other information, a product
identifier in the format US:ACJ----------.
If requested, this number must be provided to the
telephone company.
• Registration No .....(found on the rear of the unit)
• Ringer Equivalence No. (REN)
...............................(found on the rear of the unit)
A plug and jack used to connect this equipment to
the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with
this product. It is designed to be connected to a
compatible modular jack that is also compliant.
The REN is used to determine the number of
devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in
the devices not ringing in response to an incoming
call. In most but not all areas, the sum of RENs
should not exceed five (5.0).To be certain of the
number of devices that may be connected to a
line, as determined by the total RENs, contact the
local telephone company. For products approved
after July 23,2001,the REN for this product is part
of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by
## are the REN without a decimal point (e.g.,03 is
a REN of 0.3).
Connection to party line service is subject to state
tariffs. Contact the state public utility commission,
public service commission or corporation
commission for information.
If your home has specially wired alarm equipment
connected to the telephone line, ensure the
installation of this equipment does not disable your
alarm equipment. If you have questions about
what will disable alarm equipment, consult your
telephone company or a qualified installer.
This equipment is hearing aid compatible as
defined by the FCC in 47 CFR Section 68.316.
WHEN PROGRAMMING EMERGENCY
NUMBERS AND(OR) MAKING TEST CALLS TO
EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to the
dispatcher the reason for the call.
2) Perform such activities in the off-peak hours,
such as early morning or late evenings.
The software contained in this equipment to allow
user access to the network must be upgraded to
recognize newly established network area codes
and exchange codes as they are placed into
service. Failure to upgrade the premises systems
or peripheral equipment to recognize the new
codes as they are established will restrict the
customer and the customer's employees from
gaining access to the network and to these codes.
CAUTION:
If this equipment causes harm to the telephone
network, the telephone company will notify you in
advance that temporary discontinuance of service
may be required. But if advance notice isn't
practical, the telephone company will notify the
customer as soon as possible. Also, you will be
advised of your right to file a complaint with the
FCC if you believe it is necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this
happens the telephone company will provide
advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, for
repair or warranty information, please contact a
Factory Servicenter or other Authorized Servicer. If
the equipment is causing harm to the telephone
network, the telephone company may request that
you disconnect the equipment until the problem is
resolved.
76
Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate this
device.
NOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
FL611-PFQX2072ZA-en.book Page 77 Thursday, December 21, 2006 11:10 AM
10. General Information
— Reorient or relocate the receiving antenna.
— Increase the separation between the
equipment and receiver.
— Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
— Consult the dealer or an experienced radio/TV
technician for help.
77
FL611-PFQX2072ZA-en.book Page 78 Thursday, December 21, 2006 11:10 AM
10. General Information
Limited Warranty
10.4 Limited Warranty
PANASONIC CONSUMER ELECTRONICS COMPANY,
DIVISION OF PANASONIC CORPORATION OF
NORTH AMERICA
One Panasonic Way, Secaucus, New Jersey 07094
PANASONIC PUERTO RICO, INC.
San Gabriel Industrial Park,
Ave. 65 de Infantería, Km. 9.5,
Carolina, Puerto Rico 00985
Panasonic Facsimile Product
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic
Consumer Electronics Company or Panasonic Puerto Rico, Inc. (collectively referred to as “the warrantor”)
will, for the length of the period indicated on the chart below, which starts with the date of original purchase
(“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b)
replace it with a new or a refurbished product. The decision to repair or replace will be made by the
warrantor.
FAX categories
Thermal Transfer Facsimile
Laser Facsimile
Parts
Labor
6 Months
6 Months
1 (one) Year
1 (one) Year
Batteries, antennas, ink film, toner cartridge, drum unit, and ink cartridge (as may be applicable), and
cosmetic parts (cabinet) are not warranted under this Limited Warranty.
During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” Limited
Warranty period, there will be no charge for parts. You must carry-in or mail-in your product during the
Limited Warranty period. This Limited Warranty only applies to products purchased and serviced in the
United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only
covers products purchased as new. A purchase receipt or other proof of the original purchase date is
required for Limited Warranty service.
Carry-In or Mail-In Service
For Carry-In or Mail-In Service in the United States call 1-800-HELP-FAX (1-800-435-7329)
For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax (787)-768-2910.
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT
COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER
damages which occurred in shipment, or failures which are caused by products not supplied by the
warrantor such as non Panasonic ink film, toner cartridge or drum unit, or failures which result from
accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up
adjustments, signal reception problems, misadjustment of consumer controls, improper maintenance,
power line surge, improper voltage supply, lightning damage, modification, or commercial use (such as in a
hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a
Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY
COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF
THIS LIMITED WARRANTY. (As examples, this excludes damages for lost time, cost of having someone
remove or re-install an installed unit if applicable, or travel to and from the servicer. The items listed are not
exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
78
FL611-PFQX2072ZA-en.book Page 79 Thursday, December 21, 2006 11:10 AM
10. General Information
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations
on how long an implied Limited Warranty lasts, so the exclusions may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have other rights which vary from
state to state. If a problem with this product develops during or after the Limited Warranty period, you may
contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the
warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR
RESPONSIBILITY.
For In Limited Warranty product service
• Call toll-free 1-800-HELP-FAX (1-800-435-7329)
for the location of an authorized servicenter.
For out of Limited Warranty technical and
troubleshooting support: Panasonic offers two
value based, cost effective, solutions:
1. Panasonic Continued Services 900 fee
based support: 1-900-FAX-HELP (1-900-3294357)
This exceptional service is charged directly to
your telephone bill at only $2.49 per minute.
2. Panasonic Premier Service Club (PPSC):
1-800-435-7329
PPSC provides toll free troubleshooting support
at only $7.99 for a one time sampler or $23.95
for a one year or 5 call membership. These
services are billed directly to your major credit
card.
When you ship the product
• Carefully pack your unit, preferably in the original
carton.
• Attach a letter, detailing the symptom or problem,
to the outside of the carton.
• Send the unit to an authorized servicenter,
prepaid and adequately insured.
• Do not send your unit to the Panasonic
Consumer Electronics Company or to any
executive or regional sales office. These
locations do not repair consumer products.
Both of these comprehensive programs provide
real time, live agent support for customers who
are not eligible for coverage under the limited
warranty.
Terms and prices are subject to change without
notice.
79
FL611-PFQX2072ZA-en.book Page 80 Thursday, December 21, 2006 11:10 AM
10. General Information
Customer Services
10.5 Customer Services directory
Customer Services Directory
Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Servicenter; purchase Parts and Accessories; or make Customer
Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/consumersupport
or E-mail us via:
consumer_fax@us.panasonic.com
Contact:
For in Limited Warranty programming and Troubleshooting Support:
Fax Advantage assistance and Service Location finder: 1-800-HELP-FAX (435-7329)
For out of Limited Warranty technical and troubleshooting support:
Panasonic offers two value based, cost effective, solutions:
1. Panasonic Continued Services 900 fee based support: 1 900 FAX HELP (1 900 329 4357)
This exceptional service is charged directly to your telephone bill at only $2.49 per minute.
2. Panasonic Premier Service Club (PPSC): 1 800 435 7329
PPSC provides toll free troubleshooting support at only $7.99 for a one time sampler or $23.95 for a
one year or 5 call membership. These services are billed directly to your major credit card.
Both of these comprehensive programs provide real time, live agent support for customers who are not
eligible for coverage under the limited warranty. Terms and prices are subject to change without notice.
For hearing or speech impaired TTY users, TTY: 1-866-741-6422
Accessory Purchases
Purchase Parts, Accessories and Instruction Books online for all Panasonic
Products by visiting our Web Site at:
http://www.pasc.panasonic.com
or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
Service in Puerto Rico
Panasonic Puerto Rico, Inc.
San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5, Carolina, Puerto Rico 00985
Phone (787) 750-4300 Fax (787) 768-2910
80
FL611-PFQX2072ZA-en.book Page 81 Thursday, December 21, 2006 11:10 AM
11. Index
11. Index
11.1 Index
Collation: 47
Enlarge: 46
Reduce: 46
# #00 Quick Setup: 19
#01 Date and time: 28
#02 Your logo: 29
#03 Your fax number: 30
#04 Sending report: 38, 49
#06 FAX ring count: 49
#12 Remote activation ID: 49
#13 Dialing mode: 49
#16 Paper size: 49
#17 Ringer pattern: 27
#22 Automatic journal report: 38, 50
#23 Overseas mode: 50
#25 Delayed send: 50
#26 Automatic Caller ID list: 50
#31 Distinctive Ring: 44
#32 Fax ring pattern: 45
#37 Auto reduction: 50
#39 Display contrast: 50
#41 Fax activation code: 50
#44 Memory reception alert: 51
#46 Friendly reception: 51
#68 ECM selection: 51
#76 Connecting tone: 51
#79 Toner save: 51
#80 Set default: 51
D Date and time (Feature #01): 28
Delayed transmission (Feature #25): 50
Dialing mode (Feature #13): 49
Direct command: 52
Display
Contrast (Feature #39): 50
Error messages: 54
Distinctive Ring service (Feature #31): 44
Document size: 38
Drum life: 75
Drum unit: 12, 61
A Accessories
A4 Paper guide: 17
Paper stacker: 15
Paper tray: 14
Paper tray cover: 14
Advanced features: 50
Alert
Memory reception (Feature #44): 51
Answering machine: 23
Auto reduction (Feature #37): 50
L Logo (Feature #02): 29
B Basic features: 49
Broadcast transmission: 39
C Caller ID
Calling back: 35
Storing: 36
Caller ID list (Feature #26): 34, 50
Caller IQ feature: 70
Character table: 29
Cleaning: 67
Connecting tone (Feature #76): 51
Connections: 18
Copy: 46
E ECM selection (Feature #68): 51
Error messages: 54
Extension telephone: 41
F Fax activation code (Feature #41): 50
Fax number (Feature #03): 30
Friendly reception (Feature #46): 51
H Help: 27
J Jams
Document: 66
Recording paper: 64
Journal report (Feature #22): 38, 50
Junk fax prohibitor: 42
M Memory reception alert (Feature #44): 51
N Navigator directory
Making a phone call: 33
Sending faxes: 39
Storing: 32
O One-touch dial
Making a phone call: 33
Sending faxes: 39
Storing: 32
openLCR service: 70
Overseas mode (Feature #23): 50
P Paper size (Feature #16): 49
Power failure: 60
Programming: 48
Q Quick scan: 37
Quick Setup (Feature #00): 19
R Receiving faxes
Automatically: 42
Manually: 41
Recording paper: 16
81
FL611-PFQX2072ZA-en.book Page 82 Thursday, December 21, 2006 11:10 AM
11. Index
Recording paper size: 74
Redialing: 37, 39
Remote activation ID (Feature #12): 49
Reports
Broadcast programming: 72
Broadcast sending: 40
Caller ID: 35, 50
Journal: 38, 72
Power down: 60
Printer test: 72
Sending: 38, 49
Setup: 72
Telephone number: 72
Reset (Feature #80): 51
Resolution: 37, 46
Ringer pattern (Feature #17): 27, 49
Ring pattern for Distinctive Ring (Feature
#32): 45
Ring setting
FAX ONLY (Feature #06): 49
S Sending faxes
Broadcast: 40
From memory: 37
Manually: 37
Navigator directory: 39
One-touch dial: 39
Sending report (Feature #04): 38, 49
Set default (Feature #80): 51
Storing
Broadcast: 39
Navigator directory: 32
One-touch dial: 32
T Toner cartridge
Installing: 12
Replacing: 61
Toner life: 74
Toner save (Feature #79): 13, 51
V Volume: 27
82
FL611-PFQX2072ZA-en.book Page 83 Thursday, December 21, 2006 11:10 AM
83
FL611-PFQX2072ZA-en.book Page 84 Thursday, December 21, 2006 11:10 AM
KX-FL611
Proof of Purchase
Panasonic FAX ADVANTAGE PROGRAM
Free peace of mind,
direct from Panasonic
NO EXTRA COST
FAX ADVANTAGE PROGRAM
■
■
1-year limited warranty 1: parts, labor, and toll-free
help line 2
Free overnight replacement 3 and repair program
The Panasonic Fax Advantage Consumer Service Program.
Panasonic knows that if your fax machine is not up and running,
neither is your business. That’s why we created the Panasonic
Fax Advantage Program. Included at no extra cost with the
purchase of a new and unused Panasonic Fax Machine, the Fax
Advantage Program can provide a free replacement unit3
overnight if your original unit is in need of repair.
Here’s how it works:
1. If you have a problem with your fax that you purchased new
and unused while it is covered by the period of limited
warranty1, call our toll-free help-line at 1-800-HELP-FAX2.
2. Talk to one of our technical experts to diagnose your problem
over the phone.
3. If repairs are necessary and you are entitled to service under
the terms and conditions of the limited warranty4, we will send
a refurbished replacement unit to you by overnight service
delivery.
A second option available under our limited warranty is to mail-in
or carry-in your fax to one of our Regional Service centers, where
the unit will be repaired and returned to you.
Instructions:
If you choose to receive a replacement unit under the Fax
Advantage Program, Panasonic will provide a replacement unit
which will be completely refurbished, quality-tested by Panasonic
technicians and individually hand-inspected before it is shipped
to you. You will keep the replacement unit and send the original
unit to us in the replacement unit’s box. Contact the shipper who
will pick up the unit at no charge to you, should it be determined
that you are entitled to warranty service. A proof-of-purchase
must be included with the returned product. Any unit that is
replaced by Panasonic and not shipped with proper proof-ofpurchase by you will be subject to a minimum $100.00 charge.
The original unit must be properly packaged in the same manner
as the replacement unit, utilizing the packing materials provided.
Damage due to improper or inadequate packing will be charged
to you as an out-of-warranty cost.
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of
North America
One Panasonic Way, Secaucus, New Jersey 07094
If our 1-800-HELP-FAX technicians determine that your unit
may be an “out-of-box failure”5, we will attempt to provide you
with a factory-new replacement unit6. You must ship a copy of
your receipt with your original unit to verify that you purchased
the unit within 10 days prior to your 1-800-HELP-FAX call.
Requirements:
You must give our technicians a valid credit card number
(Discover, VISA, Master Card, or American Express/Optima).
Product that is not returned to Panasonic by 10 business days
after shipment of the replacement product will be charged to
your credit card account at Panasonic’s Suggested Retail Price
(see dealer for details). If your original unit is not eligible for
warranty service, your card will be charged for the non-warranty
repair of the unit at Panasonic’s current rate for parts and labor
and for any shipping charges associated with this program. If
you do not wish to pay out-of-warranty repair costs, you will be
responsible for returning the replacement unit to Panasonic and
for paying all shipping charges associated with this program
including the overnight delivery of the replacement product to
you, shipment of the problem unit to Panasonic, shipment of
the replacement unit back to Panasonic and the return of your
original unit back to you. Credit status will be verified prior to
sending the replacement product.
1. See dealer for limited warranty details.
2. After the fax advantage program, contact our Continued
Services Technical Support Line at 1-900-FAX-HELP (1900-329-4357), for fee based technical support.
3. Replacement unit is refurbished.
4. Replacement program is only available in the 50 United
States and is subject to termination at any time without
advance notice.
5. “Out-of-box failure” is an inoperable unit that was purchased
no more than 10 days prior to your 1-800-HELP-FAX call,
and would otherwise qualify for warranty service under the
terms and conditions of the limited warranty.
6. Panasonic reserves the right to send a refurbished unit.
Panasonic Puerto Rico, Inc.
San Gabriel Industrial Park,
Ave. 65 de Infantería, Km. 9.5,
Carolina, Puerto Rico 00985
PFQX2072ZCCM0904DT2126
CM0904DT2126
PFQX2072ZC
Download PDF
Similar pages