Index: WMGBCMP600
CURRENT CLAMP-ON METER
WITH WIRELESS DATA TRANSMISSION
re
Wi
ansmission
up
to
!
export@sonel.pl
www.sonel.pl
ta tr
0m
Sonel S.A.
ul. Wokulskiego 11
58-100 Świdnica, PL
tel. +48 74 85 83 860
fax +48 74 85 83 809
es
a
sd
10
l
CMP-600
· AC and DC current measurement (TRUE RMS) up to 600A.
· AC and DC voltage measurement (TRUE RMS) up to 600V.
· Acoustic signalling programmable for instances of exceeding the MAX/MIN values set.
· Resistance measurement and continuity test:
- continuity test with acoustic signalling (for resistance below 1000).
· Frequency measurement.
· Diode test.
· Wireless cooperation with many transmitters.
· CMP-600R compatible with a computer via a USB interface. Software provided.
· Comfortable case for the meter and accessories.
CMP-600
· AC and DC current measurement (TRUE RMS) up to 600A.
· AC and CD voltage measurement (TRUE RMS) up to 600V.
· Acoustic signalling programmable for instances of exceeding the MAX/MIN
values set.
· Resistance measurement and continuity test:
- continuity test with acoustic signalling (for resistance below 1000).
· Frequency measurement.
· Diode test.
· Can be wirelessly connected to many transmitters.
· CMP-600R receiver made compatible with a computer via a USB interface.
· Additionally:
- safe, insulated measuring clamps (30mm or a 35x10mm rack),
- automatic range selection switchable to the manual range selection mode
- “HOLD" function for holding measured values on the LCD,
AC and DC current measurement TRUE RMS (50...500Hz)
Range
Resolution
Accuracy (DC)
Accuracy (AC)
400A
0,1A
±(1,8% m.v. + 10 digits)
±(1,8% m.v. + 10 digits)
for f=50...500Hz
600A
1A
±(1% m.v. + 5 digits)
±(1% m.v. + 5 digits)
for f=50...500Hz
DC voltage measurement
Range
Resolution
Accuracy
400mV
0,1mV
±(0,75% m.v. + 3 digits)
4V
0,001V
40V
0,01V
400V
0,1V
600V
1V
±(1% m.v. + 3 digits)
- legible LCD,
- “DC ZERO" function – DC of the instrument can be zeroed, and the absolute
measurement mode can be restored, at any time,
AC voltage measurement TRUE RMS (50...500Hz)
Range
Resolution
4V
0,001V
- storage of minimum and maximum values,
40V
0,01V
- estimates of electric energy costs made by the program provided.
400V
0,1V
600V
1V
- relative measurement mode for AC,
Electric security:
- measurement category
- casing protection class acc. to EN 60529
Accuracy
±(1,5% m.v. + 10 digits)
±(1,5% m.v. + 5 digits)
Resistance measurement
CAT III 600V acc. to EN 61010-1:2004
IP40
Other technical data:
- power supply for transmitter and receiver
2 1.5V batteries type LR6
- display
LCD, 4 digits
- uninterrupted work time
300h transmission off, 100h transmission on (t=2s)
- transmitter’s dimensions
220 x 64 x 35 mm
- receiver’s dimensions
179 x 72 x 32 mm
- transmitter’s weight (without batteries)
ca. 251 g
- receiver’s weight (without batteries)
ca. 177 g
- LCD refresh rate
3x/s transmission off and 1x/s transmission on
- transmission frequency
433,62MHz
- polarisation
automatic, negative polarisation indicated (-)
- accordance with the following standards
EN 61010-1:2004, EN 61010-2-032
Rated operational conditions:
- operating temperature
- storage temperature
-10..+50°C, rel. hum. < 80%
-20..+60°C, rel. hum. < 70%
Standard equipment of CMP-600:
- test leads (2 pcs.)
- 1.5V AA battery (4 pcs.)
- case for the meter and accessories
- CD
- operating manual
- guarantee card
WAPRZCMP1
Range
Resolution
400Ω
0,1Ω
4kΩ
0,001kΩ
40kΩ
0,01kΩ
Accuracy
±(1% m.v. + 5 digits)
400kΩ
0,1kΩ
4MΩ
0,001MΩ
±(3% m.v. + 5 digits)
40MΩ
0,01MΩ
±(5% m.v. + 5 digits)
Frequency measurement
Range
Resolution
5Hz
0,001Hz
50Hz
0,01Hz
500Hz
0,1Hz
5kHz
0,001kHz
50kHz
0,01kHz
100kHz
0,1kHz
Accuracy
±(0,7% m.v. + 5 digits)
Continuity test
Range
Resolution
Accuracy
400Ω
0,1Ω
not specified
Diode test
Additional equipment of CMP-600:
- adapter to facilitate measurements of AC-16 current
WAADAAC16
Range
Resolution
Accuracy
1V
0,001V
±(10% m.v. + 5 digits)
„m.v.”- measured value
v.1
Download PDF
Similar pages