Single 10/100 BASE-TX Filtered Connector Integrated LED Support

NUMBER : RD-SDRJLBC-060TC1
DATE : 2005/09/08 I(REV:A1)
Single 10/100 BASE-TX Filtered Connector Integrated LED
Support Auto MDIX
MODEL NO. : RJLBC-060TC1
Features
◎
◎
◎
◎
◎
◎
◎
RoHS Compliant
Fully shielded magnetics protect data from internally generated digital noise
Reduces the overall length of the signal path for improved common mode performance
Implements full common mode termination scheme with used and unused twisted pairs
Meets IEEE802.3 Baseline Wander Compensation specification
Integrates high voltage capacitor to chassis ground
Supports all major transceivers with matched turns ration and complete integration of
specified termination
Design for 100base-tx transmission over UTP-5 cable
Operating TEMP. range: -40℃ to +85℃
Storage TEMP. range: -55℃ to + 125℃
Primary OCL inductance: 350μH MIN. at 100KHz/0.1Vrms with 8mA DC bias
With the LED lamp
◎
◎
◎
◎
◎
Typical Performance Characteristics@ 25C
Insertion Loss
(dB MAX)
Return Loss
(dB Min @100±15Ω)
MHz
1~100
-1.0
MHz
1~30 40 50 60~80
-16 -14 -12 -10
Differential to
Common
Mode Rejection
(dB MIN)
MHz
1~100
-33
Schematic Design on MDI Interface Circuitry
Cross talk
(dB MIN)
CMRR
(dB MIN)
Isolation
Voltage
(Vrms min)
MHz
20 40 60 80 100
-47 -40 -37 -35 -33
MHz
1~100
-30
1500
NUMBER : RD-SDRJLBC-060TC1
DATE : 2005/09/08 I(REV:A1)
MODEL NO. : RJLBC-060TC1
Dimension: mm
#1
TOLERANCE:±0.15 (unless otherwise specified)
#8
Yellow
Green
RECOMMENDED P.C.B LAYOUT
COMPONENT SIDE OF BOARD
NUMBER : RD-SDRJLBC-060TC1
DATE : 2005/09/08 I(REV:A1)
MODEL NO. : RJLBC-060TC1
Ordering Information
RJLBC – 060
TC1
Cartridge Type
RJ45
Series NO.
Requirements:
1. Design and Construction
Product shall be of design, construction and physical dimensions specified on
applicable product drawing.
2. Materials and Finish
A. Contact:
RJ Contact : Phosphor Bronze, Thickness=0.30mm
Finish :Contact Area : 6μ”min. Gold over 50μ”min. Nickel
RJ Joint Contact : Phosphor Bronze, Thickness=0.3mm
Finish : 80μ”min. Sn over 50μ”min. Nickel
LED Joint Contact : Brass, Thickness=0.50mm
Finish : 80μ”min. Sn over 50μ”min. Nickel
B. Plastic Part :
(1) Set Housing : Thermoplastic, PBT, Black
UL FILE NO. : E107536
Manufacturer : SHIKONG SYNTHETIC FIBERS CORP.
Grade : E202G30BK
Flame Class : UL 94V-0
(2) Insert : Thermoplastic, PBT, Black
UL FILE NO. : E107536
Manufacturer : SHIKONG SYNTHETIC FIBERS CORP.
Grade : E202G30BK
Flame Class : UL 94V-0
(3) Spacer : Thermoplastic, PBT, Black
UL FILE NO. : E107536
Manufacturer : SHIKONG SYNTHETIC FIBERS CORP.
NUMBER : RD-SDRJLBC-060TC1
DATE : 2005/09/08 I(REV:A1)
MODEL NO. : RJLBC-060TC1
Grade : E202G30BK
Flame Class : UL 94V-0
C. Shield Material :
Cartridge t=0.25mm
10μ”-20μ” Thick Nickel over Brass.
D. LED Lamp
(a) Lens Color : Transparent with color
(b) Emitted Color : Yellow &Green
(c) View Angle : 65∘
(d) Wave Length : Yellow 585nm ; Green 568nm
(e)Recommended operation current (IF):20 mA
3. Ratings
(1) Voltage rating : 125 VAC
(2) Current rating : 1.5A
Durability :
(1)1000 cycles with no function damage for RJ-45 . Abnormalities shall be present
after the test.
(2)Low Level Contact Resistance : ΔR=30mΩ maximum (final)
(3)The sample should be mounted in the tester and fully mated and unmated 500
times per hour at the rate of 25mm/min.EIA-364-09C.
NUMBER : RD-SDRJLBC-060TC1
DATE : 2005/09/08 I(REV:A1)
Model NO.: RJLBC-060TC1
1.
2.
3.
4.
Unit weight :5.7 grams
package : 100 pcs / tray / 0.61 kgms
Carton : 1000 pcs / 10 layers of tray
Gross weight : 6.6455 kgms
Package drawing:
Download PDF
Similar pages