HDMI Extender 50m IR with POC DEAR

HDMI Extender 50m IR with POC
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting product. Please keep this manual
for future reference.
1.0 INTRODUCTION
The HDMI Extender over Single Cat5e/6 with IR extends high definition video and audio signals
and IR, at a distance of up to 164ft/50m over a single Cat5e/6 cable. Features EDID management,
which allows and encourages source and display “handshake” for seamless integration. With only
one cost effective Cat5e/6 cable, high definition sources with HDMI outputs can be connected to
high definition displays with HDMI inputs over long distances. Deep color video, DTS-HD or Dolby
True HD audio is supported and compatible with the extender. In addition, the extender is also
equipped with pass-through which allows for source control.
The extender includes two units: transmitting unit and receiving unit. The transmitting unit is
used to capture the HDMI input with IR signals and carries the signals via one cost effective
Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and
reconstructing IR control signals. The extender offers the most convenient solution for HDMI
extension over a single Cat5e/6 with long distance capability, and is the perfect solution for any
application
2.0 FEATURES
1.Aluminum housing,small size and light weight.
2.HDMI Loop out for Local Display,cascading via additional HDMI loop out port
3.copy EDID from receiver display or loop out display
4.Support power over cable function
5.1080p resolution up to 50m over a single Cat5e or Cat6 cable.
7. Allows HDMI Audio/Video and IR signals to be transmitted over a single Cat5e/6 cable.
8.Transmission Range: Extends 1080p resolution up to 164ft/50m over a single Cat5e or Cat6
cable.
9.Works with HDMI and HDCP compliant devices
10.Supports up to 1080p High Definition resolution.
11.Compact design for an easy and flexible installation.
3.0 PACKAGE
HDMI Transmitter …………………………………………………………………………………1pcs
HDMI Receiver ……………………………………………………………………………………..1pcs
IR Tx cable …………………………………………………………………………………………….1pcs
IR Rx cable …………………………………………………………………………………………….1pcs
5V1A DC Power Supply Adaptor…………………………………………………………….1pcs
User Manual …………………………………………………………………………………………1pcs
4.0 SPECIFICATIONS
Video
Bandwidth................................................................................Single-link
165Mhz
[4.95Gbps]
Video Support…………………………………………………………………………480i/480p/720p/1080i/1080p@60
Audio Support…………………………………………….Surround Sound (up to 7.1 ch) or stereo digital audio
Transmission Range…................................................... HD [1080p 24-bit color] – up to 50m [164ft]
Input TMDS Signal……………………………………………………………………………………………………………3.3 volts
Input DDC Signal……………………………………………………………………………………………………….5.0 volts/P-P
ESD Protection……………….... Human Body Model: ±8kv(air –gap discharge) ±4kv (contact charge)
HDMI connector…………………………………………………………………………………………….Type A 19 pin female
RJ-45 connector…………………………………………………………………………………………………………..WE/SS 8P8C
3.5mm connector………………………………………………………………………(TX and RX) IR Receiver/IR Blaster
Housing…………………………………………………………………………………………………………………Metal enclosure
Power Supply……………………………………………………………………………………………………………………5V1A DC
Power consumption………………………………………………………………………….1.5 watts (TX); 1.0 watts (RX)
Operation temperature…………………………………………………………...........0℃ to 40 ℃/32℉ to 104℉
Storage temperature……………………………………………………………………-20℃to 60 ℃/-4℉ to 104℉
Relative humidity…………………………………………………………………………..20~90 % RH (no condensation)
5. Panel descriptions
5.1 Transmitting unit
1. HDMI in: This slot is where you connect the HDMI output port of your source equipment such
as DVD/Blu-ray players or Set-Top-Box with an HDMI cable.
2. EDID: The switcher can switch copy EDID function, switch to right position, the extender will
copy hdmi loop out display EDID information to source. Switch to left position,
the extender will copy Receiver display EDID to source.
3. HDMI out: This slot is to connect the HDMI in put of your display such as an HDTV.
4. IR out: Connect the IR Blaster cable included in the package for IR signal transmission.
Pace the IR blaster in direct line-of-sight of the equipment to be controlled.
5. Power LED: This LED will illuminate when the device is connected with power supply.
6. CAT: Connect the CAT output of the transmitter with the CAT input of the receiver with CAT5E/6
cable.
7. Link LED: This LED will illuminate when the device is connected to HDMI source.
8. DC 5V: Connect from 5V DC power supply into the unit and connect the adaptor to an AC
outlet.
5.2 Receiver unit
1. EQ switcher: HDMI Receiver equalizer switcher.
2. HDMI out: This slot is to connect the HDMI input port of your display such as an HDTV.
3. IR in: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is
within the direct line-of-sight of the IR receiver.
4. Power LED: This LED will illuminate when the device is connected with power supply.
5. CAT: Connect the CAT input of the receiver with the CAT output of the transmitter with CAT5E/6
cable.
6. Lock LED: This LED will illuminate when the HDMI signal from the transmitter is stable.
7. DC 5V: Connect from 5V DC power supply into the unit and connect the adaptor to an AC
outlet.(For POC function, the receiver does not need power supply)
5.3 RX Equalizer distance adjust
If you see flickering or blinking image on the display, adjust the EQ switch to improve the cable
skew. MAX stands for the strongest HDMI signal level for the longest possible transmission length
while MIN stands for the weakest HDMI signal level for short
transmission length. Adjust the signal level from MIN to MAX until desired video quality is
displayed .
Recommended EQ setting
Position
Cable Length
Position
under 15m (49.5ft)
30-40m
(99ft
Cable Length
15-30m (49.5 ft - 99ft)
-
132ft)
6.CONNECTION DIAGRAM
40-50m(132ft – 164ft)
7. CONNECT AND OPERATE
Connect a source such as a Blu-Ray Player, game
console, A/V Receiver, Cable or Satellite Receiver, etc.
to the HDMI input on the Transmitting unit.
2. Connect a display such as an HDTV or HD Projector to the HDMI output on the Receiving unit.
3. Connect a single Category 5e/6 up to 164ft/50m to the output of the Transmitting unit, and the
other end to the input of the Receiving unit.
4. For power, plug both the Transmitting unit and Receiving unit with the included power supplies.
5. Power on each device in the same sequence (receiver and transmitter will already be powered
when either unit is plugged in.)
At this point the display connected should display the source signal connected to the extender set.
If no signal is being displayed, check the receiver EQ swithcer. If a display is having dif+iculty
receiving a signal, see EDID section and perform EDID learning or access the display's menu and
adjust the resolution (lowest to highest until signal is displayed). A 24 Hz vertical refresh rate may
work better than 60 Hz or higher. Use the source remote at the receiver emitter to test IR
functionality. If the IR remote function is not responding, check the emitters to ensure they are
placed correctly and are plugged into the correct IR jacks on the Extender set receiving and
transmitting
units.
Wideband IR(30KHz---60KHz) introduction
R BLASTER (TX)
To control the source: Plug IR Blaster into IR TX port of transmitter unit; place blaster in front of
the IR eye of the source.
IR RECEIVER (RX)
I
To control the source: Plug IR Receiver into IR RX port of receiver unit; place receiver at or near
display.
Download PDF
Similar pages