PRAIRIE RIDGE
Wooden Swing Set
Model: 55006
••
••
••
••
Owner's Manual
Frequently Asked Questions
Assembly Instructions
Warranty Information
Manufacturer: Backyard Discovery
3001 North Rouse
Pittsburg, KS 66762
1-800-856-4445
Register your new swing set on-line @ www.swingsetsonline.com
(you will also find any updates on assembly instructions and
information to order replacement parts)
Features the
fastening system.
Save this assembly manual for future reference in the event that
you need to order replacement parts.
INS-55006-A-PRAIRIE RIDGE PC-Eng-12/26/12
Made in China
STOP
PARE
Missing A Part?
CALL US BEFORE GOING
BACK TO THE STORE!
The store where you made your purchase
does not stock parts for this item.
If you have assembly questions or if you need parts,
whether they are missing or damaged
Call Toll-Free Help Line or visit www.swingsetsonline.com
¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA!
La tienda donde realizó la compra no almacena piezas de este producto.
Si tiene preguntas sobre el ensamblaje o si necesita piezas debido a que
faltan o están dañadas
llame gratis a la línea de ayuda
1-800-856-4445
PLEASE READ THIS BEFORE STARTING ASSEMBLY
POR FAVOR LEA ESTAS INSTRUCCIONES ANTES DE COMENZAR EL ENSAMBLAJE
•
•
•
•
•
•
•
•
•
•
•
READ THE ASSEMBLY MANUAL COMPLETELY, PAYING SPECIAL ATTENTION TO THE IMPORTANT TIPS AND
SAFETY INFORMATION.
AFTER YOU HAVE READ THE ASSEMBLY MANUAL, YOU WILL BE ABLE TO DECIDE IF YOU NEED PROFESSIONAL
HELP TO COMPLETE THE ASSEMBLY OF THE STRUCTURE.
SEPARATE AND IDENTIFY ALL PARTS TO MAKE SURE THAT YOU HAVE ALL OF THE PARTS LISTED.
IF YOU CAN’T FIND ALL OF THE PARTS, CHECK THE PACKING MATERIAL. SMALL PARTS MAY HAVE FALLEN INTO IT
DURING SHIPMENT.
IF YOU HAVE PROBLEMS WITH THE ASSEMBLY OR IF ANY PART IS MISSING OR
DAMAGED, PLEASE CALL THE
HELP LINE 1-800-856-4445 OR VISIT www.swingsetsonline.com
LEA EL MANUAL DE ENSAMBLAJE COMPLETAMENTE, PRESTANDO ESPECIAL ATENCIÓN A LOS CONSEJOS ÚTILES
IMPORTANTES Y A LA INFORMACIÓN SOBRE SEGURIDAD.
DESPUÉS DE QUE HAYA LEÍDO EL MANUAL DE ENSAMBLAJE, PODRÁ DECIDIR SI NECESITA AYUDA PROFESIONAL
PARA EFECTUAR EL ENSAMBLAJE DE LA ESTRUCTURA.
SEPARE E IDENTIFIQUE TODAS LAS PIEZAS PARA COMPROBAR QUE DISPONE DE TODAS LAS PARTES INDICADAS.
SI NO PUEDE ENCONTRAR TODAS LAS PIEZAS, REVISE EL MATERIAL DE EMPAQUE. ES POSIBLE QUE ALGUNAS
PIEZAS PEQUEÑAS PUEDAN HABERSE CAÍDO ALLÍ DURANTE EL ENVÍO.
MANTÉNGASE ALEJADO DE LOS NIÑOS MENORES A LA EDAD RECOMENDADA.
SI TIENE PROBLEMAS CON EL ENSAMBLAJE O SI ALGUNA PIEZA FALTA O ESTÁ DAÑADA, LLAME A LA LÍNEA DE
AYUDA AL 1-800-856-4445 O VISITE www.swingsetsonline.com
PLEASE HAVE THE FOLLOWING INFORMATION WHEN YOU MAKE YOUR CALL:
1 – MODEL NUMBER OF THE PRODUCT LOCATED ON THE FRONT OF THE ASSEMBLY MANUAL
2 – DESRIPTION OF THE PART FROM THE PARTS LIST
POR FAVOR TENGA VISIBLE LA SIGUIENTE INFORMACIÓN CUANDO LLAME:
1 - NÚMERO DE MODELO DEL PRODUCTO QUE SE ENCUENTRA UBICADO AL FRENTE DEL MANUAL
DE ENSAMBLAJE
2 - DESCRIPCIÓN DE LA PIEZA QUE SE ENCUENTRA EN LA LISTA DE PIEZAS
Owner’s Manual Play Set
Dear Customer:
Please read entire booklet completely before beginning the assembly process.
Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use.
The Company does not warranty any of its residential structures subjected to commercial use such as:
Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
WARNING: This Symbol points out important safety instructions which, if not followed, could endanger
the personal safety of yourself and your children and/or damage your property. You MUST read and
follow all instructions in this manual before attempting to use this playcenter.
WARNING: Children must NOT use this playcenter until unit has been completely assembled
and inspected by an adult to insure set has been properly installed and anchored.
Please follow all recommendations below. Failure to do so may result in the warranty being void and/or safety
violations that could result in serious injury. This manual contains helpful information concerning Assembly
Preparation, Installation Procedure, and Required Maintenance. Always keep the safety of your children in mind as
your play structure is being built and as your children play on the set. Before your children play on the set please
review the Operation Instructions with them to help ensure their safety.
PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. KEEP THEM IN A SAFE PLACE WHERE YOU CAN
REFER TO THEM AS NEEDED. IN ORDER TO PROVIDE YOU WITH THE MOST EFFICIENT SERVICE, IT IS REQUIRED THAT
YOU PROVIDE US WITH THE PART NUMBERS WHEN ORDERING PARTS.
For Your Records:
Please take time and fill out the information below. This information will be needed for warranty issues.
Where Purchased: ____________________
Date of Purchase: ____________________
Installation Date: _____________________
Installed by: _________________________
Tracking Number: ____________________
Staple Receipt Here
Tracking Number Reference Label
Tracking ID number on the carton and back of the ID plate are included for tracking purposes
associated with warranty claims.
Rev5/09/12
Owner’s Manual Play Set
Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height.
Positioning Your Playcenter
1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult
helper. Place in a flat area of your yard to minimize ground preparation.
2. Choose a level location for the equipment. This can reduce the likelihood of the play set
tipping over and loose-fill surfacing material washing away during heavy rains.
3. Place the equipment not less than 6 ft (1.8 m) from any structure or obstruction such as a
fence, garage, house, overhanging branches, laundry lines, or electrical wires.
4. Provide enough room so that the children can use the equipment safely. For example, for
structures with multiple play activities, a slide should not exit in front of a swing.
5. It is a good idea to place your Playcenter in an area that is convenient for adults to watch
children at play.
6. Create a site free of obstacles that could cause injuries – such as low overhanging tree
branches, overhead wires, tree stumps and/or roots, large rocks, bricks and concrete.
Additional suggestions in the Suggested Playground Surfacing Section.
7. Do not build your playset on top of surfacing material.
8. Locate bare metal platforms and slides out of direct sunlight to reduce the likelihood of serious
burns. A slide that faces north will receive the least direct sunlight.
9. Separate active and quiet activities from each other. For example, locate sandboxes away
from swings or use a guardrail or barrier to separate the sandbox from the movement of the
swings.
Suggested Playground Surfacing
Do not install home playground equipment over concrete, asphalt, packed earth, grass, carpet,
or any other hard surface. A fall onto a hard surface can result in serious injury to the
equipment user.
Do not install loose fill surfacing over hard surfaces such as concrete or asphalt.
Shredded bark mulch, wood chips, fine sand and fine gravel, are added as shock absorbing
materials after assembly. If used properly these materials can absorb some of the impact of a
child’s fall.
All surface material should extend a minimum of 6 feet in all directions around the play area.
Do not apply playground surfacing until after the unit is completely constructed. Playset should
not be built on top of surfacing.
Use containment, such as digging out around the perimeter and/or lining the perimeter with
landscape edging.
Installations of rubber tiles or poured-in-place surfaces (other than loose-fill materials)
generally require a professional and are not “do-it-yourself” projects.
Shall use Playground Surfacing Materials (other than loose-fill material) which comply with the
safety standard ASTM F1292 Standard Specification of Impact Attenuation of Surfacing
Materials within the Use Zone of Playground Equipment.
Rev5/09/12
Owner’s Manual Play Set
The following chart explains the fall height in feet from which a life threatening head injury
would not be expected
Critical Heights in feet (m) of Tested Materials
Material
Uncompressed Depth
Compressed Depth
Wood Chips
Double-Shredded bark mulch
Engineered Wood Fibers
Fine Sand
Coarse Sand
Fine Gravel
Medium Gravel
6" (152mm)
7' (2.13m)
6' (1.83m)
6' (1.83m)
5' (1.52m)
5' (1.52m)
5' (1.52m)
5' (1.52m)
9" (228mm)
10' (3.05m)
10' (3.05m)
7' (2.13m)
5' (1.52m)
5' (1.52m)
7' (2.13m)
5' (1.52m)
12" (304mm)
11' (3.35m)
11' (3.35m)
>12' (3.66m)
9' (2.74m)
6' (1.83m)
10' (3.05m)
6' (1.83m)
to 9" (228mm)
10' (3.05m)
7' (2.13m)
6' (1.83m)
5' (1.52m)
4' (1.22m)
6' (1.83m)
5' (1.52m)
Shredded Tires*
10-12' (3.0-3.6m)
N/A
N/A
N/A
*This data is from tests conducted by independent testing laboratories on a 6-inch depth of uncompressed shredded tire samples produced by four manufacturers. The tests
reported critical heights, which varied from 10 feet to greater than 12 feet. It is recommended that persons seeking to install shredded tires as a protective surface request test
data from the supplier showing the critical height of the material when it was tested in accordance with ASTM F1292.
Operating Instructions:
NOTE: Your children’s safety is our #1 concern. Observing the following statements
and warnings reduces the likelihood of serious or fatal injury. Please review these
safety rules regularly with your children.
1. This Playcenter is designed for specific number of occupants whose combined weight should
not exceed a designated weight on the elevated floor or the swing area, the total Unit capacity
is outlined in the Basic Setup Dimensions section of instruction manual. The maximum fall
height and recommended play area is also available in the Basic Setup Dimensions section of
the manual for the specific unit.
2. On-site adult supervision is required.
3. Instruct children not to walk close to, in front of, behind, or between moving swings or other
moving playground equipment.
4. Instruct children to sit in and never stand on swings
5. Instruct children not to twist the chains and ropes and not to loop them over the top support
bar, since this may reduce the strength of the chain or rope.
6. Instruct children not to jump from swings or other playground equipment in motion.
7. Instruct children to not to push empty seats. The seat may hit them and cause serious injury.
8. Instruct and teach children to sit in the center of the swings with their full weight on the seats.
9. Instruct children not to use the equipment in a manner other than intended.
10. Instruct children to always go down slides feet first. Never slide head first.
11. Instruct children to look before they slide to make sure no one is at the bottom.
12. Instruct children to never run up a slide, as this increases their chances of falling.
13. The parents should dress children appropriately. (Examples would include the use of wellfitting shoes and the avoidance of ponchos, scarfs, and other loose-fitting clothing that is
potentially hazardous while using equipment).
14. Instruct children not to climb when the equipment is wet.
15. Instruct children to never jump from a fort deck. They should always use the ladder, ramp or
slide.
16. Instruct children to never crawl or walk across the top of monkey bars.
17. Instruct children to never crawl on top of a fort roof.
Rev5/09/12
Owner’s Manual Play Set
18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that
they cannot be looped back on it.
19. Instruct children not to attach items to the playground equipment that are not specifically
designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet
leashes, cables and chain as they may cause a strangulation hazard.
20. Instruct children to never wrap their legs around swing chain.
21. Instruct children to never slide down the swing chain.
22. Instruct children to remove their bike or other sports helmet before playing on playground
equipment.
Maintenance Instructions:
At the beginning of each play season:
• Tighten all hardware.
• Lubricate all metallic moving parts per manufacturer’s instructions.
• Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose,
cracked, or missing.
• Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or
other deterioration. Replace as needed.
• Check metal parts for rust. If found, sand and repaint using a non Lead-based paint meeting
the requirements of 16 CFR 1303.
• Check all wood members for deterioration and splinters. Sand down splinters and replace
deteriorating wood members.
• Reinstall any plastic parts, such as swing seats or any other items that were removed for the
cold season.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and
to maintain appropriate depth. Replace as necessary.
Twice a month during play season:
• Tighten all hardware.
• Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose,
cracked, or missing.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and
to maintain appropriate depth. Replace as necessary.
• Once a month during play season.
• Lubricate all metallic moving parts per manufacturer’s instructions.
• Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or
other deterioration. Replace as needed.
At the end of each play season or when the temperature drops below 32° F:
• Remove plastic swing seats and other items as specified by the manufacturer and take
indoors or do not use.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and
to maintain appropriate depth. Replace as necessary.
Rev5/09/12
Owner’s Manual Play Set
Additional Maintenance:
• Check the swing beam and hardware every two weeks due to wood expansion and
contraction. It is particularly important that this procedure be followed at the beginning of each
season.
• Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season
causing splinters to appear. Light sand may be necessary to maintain a safe playing
environment. Treat your playset with stain regularly, to help prevent severe checking/splitting
and other weather damage.
• A waterbourne transparent stain has been applied to your playset. This is done for color only.
Once or twice a year, depending on your climate conditions, you must apply some type of
protection (sealant) to the wood of your unit. Prior to the application of sealant, lightly sand any
“rough” spots on your playset. Please not this is a requirement of your warranty.
• Assembling and maintaining the playset on a level location is very important. As your children
play, your playset will slowly dig its way into the soil, and it is very important that it settles
evenly. Make sure the playset is level and true one each year or at the beginning of each play
season.
Disposal Instructions:
When the Playcenter use is no longer desired, it should be disassembled and disposed of in such a
way that no unreasonable hazards will exist at the time the unit is discarded.
Third Party Assembly:
Customer may, in their sole discretion, elect to use a third party person or service to assemble this
product. Backyard Discovery assumes no responsibility or liability for any charge incurred by the
Customer for any assembly services’.
Please see our warranty for more information about damaged and missing part replacement
coverage. Backyard Discovery will not reimburse Customer for the price of parts purchased.
Rev5/09/12
Owner’s Manual Play Set
APPENDIX A
Information on Playground Surfacing Materials:
The following information is from the United States Consumer Product Safety Commission’s
Information Sheet for playground surfacing material; also see the following website for additional
information: www.cpsc.gov/cpscpub/pubs/323.html.
X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY
HANDBOOK9
X3.1 Select Protective Surfacing—One of the most important things you can do to reduce the likelihood of
serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The
protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with ASTM
Specification F 1292. There are different types of surfacing to choose from; whichever product you select, follow these
guidelines:
X3.1.1 Loose-Fill Materials:
X3.1.1.1 Maintain a minimum depth of 9 inches of loose-fill materials such as wood mulch/chips, engineered
wood fiber (EWF), or shredded/recycled rubber mulch for equipment up to 8 feet high; and 9 inches of sand or pea
gravel for equipment up to 5 feet high. NOTE: An initial fill level of 12 inches will compress to about a 9-inch depth of
surfacing overtime. The surfacing will also compact, displace, and settle, and should be periodically refilled to maintain at
least a 9-inch depth.
X3.1.2 Use a minimum of 6 inches of protective surfacing for play equipment less than 4 feet in height. If
maintained properly, this should be adequate. (At depths less than 6 inches, the protective material is too easily
displaced or compacted.) NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard
surface. A fall onto a hard surface can result in serious injury to the equipment user. Grass and dirt are not considered
protective surfacing because wear and environmental factors can reduce their shock absorbing effectiveness. Carpeting
and thin mats are generally not adequate protective surfacing. Ground level equipment such as a sandbox, activity wall,
playhouse or other equipment that has no elevated play surface – does not need any protective surfacing.
X3.1.3 Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape
edging. Don’t forget to account for water drainage.
X3.1.3.1 Check and maintain the depth of the loose-fill surfacing material. To maintain the right amount of loosefill materials, mark the correct level on play equipment support posts. That way you can easily see when to replenish
and/or redistribute the surfacing.
X3.1.3.2 Do not install loose-fill surfacing over hard surfaces such as concrete or asphalt.
X3.1.4 Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles — You may be interested in using surfacing
other than loose-fill materials – like rubber tiles or poured-in-place surfaces.
X3.1.4.1 Installations of these surfaces generally require a professional and are not “do-it-yourself” projects.
X3.1.4.2 Review surface specification before purchasing this type of surfacing. Ask the installer/manufacturer for
a report showing that the product has been tested to the following safety standard: ASTM F 1292 Standard Specification
for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment. This report should show the
specific height for which the surface is intended to protect against serious head injury. This height should be equal to or
greater than the fall height – vertical distance between a designated play surface (elevated surface for standing, sitting, or
climbing) and the protective surfacing below – of your play equipment.
X3.1.4.3 Check the protective surfacing frequently for wear.
X3.1.5 Placement — Proper placement and maintenance of protective surfacing is essential. Be sure to:
X3.1.5.1 Extend surfacing at least 6 feet from the equipment in all directions.
X3.1.5.2 For to-fro swings, extend protective surfacing in front of and behind the swing to a distance equal to
twice the height of the top bar from which the swing is suspended.
9
This information has been extracted from the CPSC publications “Playground Surfacing — Technical
Information Guide” and “Handbook for Public Playground Safety.” Copies of these reports can be obtained by sending a
postcard to the: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C., 20207 or call the
toll-free hotline: 1-800-638-2772.
Rev5/09/12
Owner’s Manual Play Set
The American Society for Testing and Materials takes no position respecting the validity of any parent right
asserted in connection with any item mentioned in this standard. Users of this standard are expressly advised that
determination of the validity of any such parent rights, and the risk of infringement of such rights, are entirely their own
responsibility.
The standard is subject to revision at any time by the responsible technical committee and must be reviewed
every five years and if not revised, either approved or withdrawn. Your comments are invited either for revision of this
standard or for additional standards and should be addressed to ASTM Headquarters. Your comments will receive
careful consideration at a meeting of the responsible technical committee, which you may attend. If you feel that your
comments have not received a fair hearing you should make your views known to the ASTM Committee on Standards.
100 Barr Harbor Drive, West Conshohocken, PA 19428.
Rev5/09/12
Play Set Assembly Manual FAQs:
1. Does the area for the playset need to be level?
Yes. Backyard Discovery recommends the playset be positioned on a flat level area for
maximum safety and durability. The stakes provided should be used to secure it firmly to the
ground.
2. What size area is recommended for the playset?
Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the playset
for maximum safety.
3. What age range is appropriate for the playsets?
Backyard Discovery playsets are recommended for children ages 3 – 10 years.
4. Is the wood treated with chemicals?
Backyard Discovery uses 100% Chinese Cedar wood which is naturally bug resistant, decay
and rot resistant. To help ensure your child’s safety, our wood is completely chemical free and
we do not use pressure-treated wood. The stain we use is a top coat using a water-based
product that is for appearance only.
5. How often should the playset be stained?
Backyard Discovery recommends the playset be stained once each year. A water or oil based
stain can be used at the customer’s discretion.
6. Why does it seem that my swing set is developing cracks?
Wood is a natural material; no two pieces are exactly alike. Each piece has its own
characteristics and personality and reacts differently to climate changes. When any wood
product is exposed to the elements, it develops “wood checks”. A check is the radial separation
of the wood fibers running with the grain of the wood. These are caused by the varying
temperature and moisture conditions. A check is not a crack – it does not affect the strength or
durability of the wood or structural integrity of the play set.
7. Do Backyard Discovery playsets come with a warranty?
Yes. All Backyard Discovery products carry a 1-year replacement warranty on all parts for
manufacturer’s defect. Our wood carries a 5 year warranty on rot and decay as well. Please see
warranty details for more information.
8. What is the best way to get started assembling the playset?
Backyard Discovery recommends taking all the parts out of the boxes and arranging them by
part number before you begin any assembly. This will not only allow faster assembly, but will
also identify any parts that may be missing or damaged so they can be replaced before
assembly. If parts are missing or need replacement, go to
Rev5/20/10 BRS
www.swingsetsonline.com/support.aspx and follow the prompts to order them. Next, read the
assembly manual and get the tools ready for the job as
recommended in the manual. If the assembly manual is lost or misplaced a new one can be
printed from Backyard Discovery’s website: www.swingsetsonline.com.
9. The playset seems to rock or sway too much. What’s wrong?
Rocking is caused by uneven ground or obstructions such as rocks, roots, etc. under the ground
rails. These should be removed and the ground underneath re-leveled to prevent rocking. Also
ensure the playset is securely staked to the ground using the stakes provided.
10. The 2”x4” boards do not measure 2”x 4”. Why not?
In the U.S. it is common practice to describe lumber dimensions using the rough cut sizes from
the sawmill and not the finished dimensions. Retailers, home stores, etc. all use this accepted
practice for describing lumber dimensions. However, Backyard Discovery playsets are designed
and constructed using the actual dimensions so everything fits properly and remains so during
the life of the playset.
11. The end beam is not straight up and down. Why not?
This is normal. Backyard Discovery designs playsets this way to ensure the strongest structure
possible. The slight angle adds strength and reduces rocking and twisting.
12. The S-hooks for the swings won’t close. What is wrong?
Backyard Discovery recommends placing them on a hard surface such as concrete (don’t do
this on anything that will dent such as metal or finished wood or glass which will break!). It will
take quite a few strokes, but the hooks will close.
For more information and frequently asked questions, please refer to our website at
www.swingsetsonline.com.
Rev5/20/10 BRS
Tools Required for Installation:
(These are the tools that are generally required for assembly of our outdoor products. These tools
are not included with the outdoor product purchase.)
(Square)
(Level 24")
(Tape Measure)
(Phillips Screw Driver)
(Cordless Drill or Electric Drill)
(Ladder)
(1/8" & 3/8" Drill Bits)
(An Adult w/ an Adult Helper)
(Claw Hammer)
(Drill Attachments: Phillips
Head & Socket Driver)
(Rubber Mallet - Optional)
Basic Setup Dimensions
Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such
as a fence, garage, house, overhanging branches, laundry lines, or electrical wires.
21'-9 3/4"
[6.6]
10'-9 3/16"
[3.3]
6'-0"
[1.8]
Safe Play Zone
6'-0"
[1.8]
General Information:
Your set has been designed and engineered for
children only and for residential use only.
A maximum of 150 lbs. per child is
recommended for play activities designed for
individual use.
A maximum of 120 lbs. per child is
recommended for play activities designed for
multiple child use.
A maximum of 9 children is recommended for
this swing set.
8'-10 1/2"
[2.7]
6'-9 3/8"
[2.1]
Safe play height: 14'-9 7/8" [2.7 m]
Maximum fall height: 6'-10 1/4" [2.1 m]
Important Assembly Notes
1) While assembling unit, take time before and after each phase to make sure fort is level. If fort is
not level, assembly will be difficult and improper assembly may result. Extra care must be taken to
insure the fort is square.
2) Tighten bolts securely, tighten nuts on bolts flush to the tube or member, and place caps over
exposed bolts snug to the nut.
3) Pay close attention to the ITEMS NEEDED FOR EACH PHASE. They can be a valuable aid when
sorting your wood and hardware. Assembly will be made easier if items are sorted by phase.
4) Pay close attention to make sure you are using the correct hardware in the correct phases. Using
incorrect hardware may result in improper assembly.
5) Whenever a T-nut is used, follow these directions. Place T-nut in pre-drilled hole. Tap in with hammer.
Place bolt with washers in the opposite side. Hand tighten to make sure the bolt is in the T-nut.
DO NOT over tighten.
6) Read the steps of each phase thoroughly. The written steps may include important information not
shown in the illustrations.
Parts Identification
Wood Components
(NOT TO SCALE)
E1 - UPRIGHT - W101261
(1) 1 3/8"x3 3/8"x81 3/4" (36x86x2076)
E2 - UPRIGHT - W101260
(2) 1 3/8"x3 3/8"x81 3/4" (36x86x2076)
E3 - UPRIGHT - W101256
(1) 1 3/8"x3 3/8"x81 3/4" (36x86x2076)
E4 - MONKEY BAR TOP - W103945
(2) 1 3/8"x3 3/8"x71 3/8" (36x86x1814)
E5 - MONKEY BAR ANGLE BRACES - W103948
(2) 1 3/8"x3 3/8"x54 1/2" (36x86x1385)
E6 - MONKEY BAR UPRIGHTS - W103946
(2) 1 3/8"x3 3/8"x82 7/8" (36x86x2105)
E77 - ANGLE BRACE - W100991
(2) 1 3/8"x3 3/8"x74 3/8" (36x86x1890)
F71 - STANDARD ANGLE BRACE - W100689
(6) 1 3/8"x2 3/8"x13" (36x60x330)
G1 - MONKEY BAR GROUND BOARD - W103947
(1) 1"x5 1/4"x79 1/2" (24x134x2020)
H1 - SERVING SHELF SUPPORT - W101604
(1) 1"x3 3/8"x30 3/4" (24x86x780)
H3 - SERVING BOARD SUPPORT - W101606
(2) 1"x3 3/8"x3 3/8" (24x86x86)
H4 - BENCH SEAT SUPPORT - W102470
(2) 1"x3 3/8"x6 1/2" (24x86x166)
H5 - BENCH UPRIGHT - W102471
(2) 1"x3 3/8"x11 3/4" (24x86x300)
H6 - BENCH GROUND BOARD - W102472
(2) 1"x3 3/8"x18 1/8" (24x86x460)
Parts Identification
Wood Components
(NOT TO SCALE)
H74 - LEFT UPRIGHT - W100608
(1) 1"x3 3/8"x50 3/4" (24x86x1290)
H75 - RIGHT UPRIGHT - W100609
(1) 1"x3 3/8"x50 3/4" (24x86x1290)
H76 - LADDER RUNG - W100611
(4) 1"x3 3/8"x18 1/8" (24x86x460)
H79 - END SUPPORT - W100992
(1) 1"x3 1/2"x42" (24x86x1072)
H80 - GROUND BOARD - W100990
(1) 1"x3 3/8"x87 3/8" (24x86x2218)
J1 - WINDOW LEDGE - W103951
(1) 1"x2 3/8"x22" (24x60x560)
J2 - END FLOOR CLEAT - W100710
(4) 1"x2 3/8"x3 3/8" (24x60x86)
J3 - FLOOR JOIST - W100984
(1) 1"x2 3/8"x60 1/8" (24x60x1528)
K1 - ROOF SWING BEAM SUPPORT - W100682
(1) 5/8"x5 1/4"x51 5/8" (16x134x1310)
K2 - ROOF SUPPORT - W103949
(1) 5/8"x5 1/4"x51 5/8" (16x134x1310)
K3 - SERVING BOARD - W101605
(1) 5/8"x5 1/4"x28 3/4" (16x134x729)
K9-1 - WALL BOARD - W100713
(6) 3/8"x3 3/8"x15 3/4" (11x86x400)
K9-2 - WALL BOARD - W103950
(4) 3/8"x3 3/8"x30 1/4" (11x86x768)
K9-3 - WALL BOARD - W101257
(2) 3/8"x3 3/8"x42" (11x86x1068)
Parts Identification
Wood Components
(NOT TO SCALE)
K9-4 - WALL BOARD - W101239
(2) 3/8"x3 3/8"x37 3/8" (11x86x950)
K9-5 - WALL BOARD - W101259
(6) 3/8"x3 3/8"x21 3/8" (11x86x544)
L1 - FLOOR RAIL - W101254
(1) 5/8"x4 3/8"x60 1/8" (16x112x1528)
L2 - GROUND BOARD - W100684
(2) 5/8"x4 3/8"x60 1/8" (16x112x1528)
L3 - GROUND BOARD - W101602
(1) 5/8"x4 3/8"x46 7/8" (16x112x1191)
L4 - FLOOR RAIL - W101603
(1) 5/8"x4 3/8"x30" (16x112x762)
L5 - GROUND BOARD - W100686
(1) 5/8"x4 3/8"x30" (16x112x762)
L6 - ARCHED RAIL - W100694
(1) 5/8"x4 3/8"x60 1/8" (16x112x1528)
L7 - SCULPTURED RAIL - W100695
(1) 5/8"x4 3/8"x60 1/8" (16x112x1528)
L8 - SCULPTURED RAIL - W101240
(1) 5/8"x4 3/8"x35 1/2" (16x112x902)
L9 - END FLOOR BOARD - W102863
(2) 5/8"x4 3/8"x29 7/8" (16x112x760)
M1 - TENT SUPPORT - W101601
(1) 5/8"x3 3/8"x59 1/4" (16x86x1504)
M2 - BENCH SEAT - W102469
(2) 5/8"x3 3/8"x27 3/8" (16x86x694)
M3 - TARP SUPPORT - W100692
(2) 5/8"x3 3/8"x60 1/8" (16x86x1528)
Parts Identification
Wood Components
(NOT TO SCALE)
M4 - TARP TOP SUPPORT - W100693
(1) 5/8"x3 3/8"x60 1/8" (16x86x1528)
M5 - FACE BOARD - W101599
(2) 5/8"x3 3/8"x43 1/8" (16x86x1094)
M6 - LOWER FACE BOARD - W101598
(2) 5/8"x3 3/8"x38 5/8" (16x86x982)
M7 - WALL BOARD - W100708
(1) 5/8"x3 3/8"x35 1/4" (16x86x895)
M8 - WALL RAIL - W100700
(1) 5/8"x3 3/8"x35 7/8" (16x86x910)
M9 - ANGLE BRACE - W100696
(1) 5/8"x3 3/8"x35 5/8" (16x86x904)
M10 - SAFETY BOARD - W100701
(1) 5/8"x3 3/8"x33 7/8" (16x86x860)
M11 - UPPER FACE BOARD - W102866
(2) 5/8"x3 3/8"x26 5/8" (16x86x676)
M12 - ROCK WALL ARCH BOARD - W102862
(1) 5/8"x3 3/8"x30" (16x86x762)
M13 - FLOOR RAIL - W102867
(1) 5/8"x3 3/8"x60 1/8" (16x86x1528)
M14 - FLOOR SUPPORT BOARD - W103944
(1) 5/8"x3 3/8"x30" (16x86x762)
Parts Identification
Wood Components
(NOT TO SCALE)
M16 - TARP SUPPORT - W101237
(1) 5/8"x3 3/8"x29 1/8" (16x86x740)
M17 - PICKET - W100705
(4) 5/8"x3 3/8"x27 1/8" (16x86x690)
M73 - REAR SUPPORT - W100610
(1) 5/8"x3 3/8"x19 1/4" (16x86x488)
M77 - SLIDE BRACE - W100544
(1) 5/8"x3 3/8"x17 1/4" (16x86x438)
M78 - CENTER SLIDE BRACE - W100545
(2) 5/8"x3 3/8"x17 1/4" (16x86x438)
SB74 - SWING BEAM EXTENDED - W102419
(1) 2"x5 1/4"x89 1/2" (50x134x2274)
SP1 - FLOOR SUPPORT CLEAT - W100711
(2) 1"x1"x53 3/8" (24x24x1356)
W71 - SWING BEAM SUPPORT - W102420
(1) 2"x3 3/8"x49 5/8" (50x86x1260)
(3) FP1 - FLOOR PANEL - W102861
(2) WP1 - WALL PANEL - W102865
Parts Identification
Hardware
(17) B - NUT BARREL WH 5/16x5/8 - H100004
(30) Z - LAG SCREW WH 5/16x2 - H100027
(38) D - NUT BARREL WH 5/16x7/8 - H100005
(2) C - NUT BARREL WH 5/16x1 1/2 - H100006
(13) AA - LAG SCREW WH 5/16x2 1/2 - H100028
(8) F - BOLT WH 5/16x1 - H100008
(4) BB - LAG SCREW HEX 5/16x2 - H100067
(3) G - BOLT WH 5/16x1 1/4 - H100009
(2) - LAG SCREW HEX 5/16x2-1/2 - H100068
(25) H - BOLT WH 5/16x1 1/2 - H100010
(2) NZ - BOLT HEX 5/16x3 - H100048
(6) J - BOLT WH 5/16x1 3/4 - H100011
(2) AN - BOLT HEX 5/16x2-3/4 - H100047
(13) K - BOLT WH 5/16x2 - H100012
(2) AK - BOLT HEX 5/16x2 - H100044
(2) M - BOLT WH 5/16x2 1/2 - H100014
(1) KA - BOLT WH 5/16x4 1/2 - H100021
(4) AE - BOLT WH 5/16x5 3/4 - H100032
(4) AH - BOLT HEX 5/16x1-1/2 - H100041
(4) AG - BOLT HEX 5/16x1 - H100040
Parts Identification
Hardware
(29) BG - T-NUT 5/16 - H100074
(4) BX - WASHER SPLIT 5/16 - H100095
(7) BE - T-NUT 1/4 - H100072
(41) CG - WASHER LOCK INT 8x15 - H100108
(7) AY - BOLT PTH 1/4x1 - H100061
(30) CC - WASHER FLAT 8x19 - H100104
(7) CH - SCREW TAPPING 14x1-1/2 - H100109
(61) BN - SCREW PFH 8x1 - H100085
(22) CE - WASHER FLAT 9x18 - H100106
(50) BR - SCREW PFH 8x1 1/8 - H100088
(22) CD - WASHER FLAT 8x27 - H100105
(24) BQ - SCREW PFH 8x1 1/4 - H100087
(124) BP - SCREW PFH 8x1 1/2 - H100086
(4) CB - WASHER SAFETY 17x30 - H100103
(28) BS - SCREW PFH 8x1 3/4 - H100089
(39) CK - SCREW PFH 8x2 - H100111
(94) AC - WASHER LOCK EXT 8x19 - H100030
(9) BV - SCREW PFH 8x2 1/4 - H100091
(26) BW - SCREW PFH 8x3 - H100092
(51) AD - WASHER LOCK EXT 12x19 - H100031
Parts Identification
(4) KY - BOLT WH 1/4x1/2" - H100141
(9) KS - NUT BARREL WH 1/4x5/8 - H100136
(4) KT - BOLT WH 1/4x1 - H100137
(2) - T-30 Torx Wrench - H100114
(15) CM - BOLT WH 5/16x1/2 - H100115
(4) BZ - SWING HANGER QUICK LINK - H100099
(7) CY - SCREW PWH 8x5/8 - H100128
(4) BY - SWING HANGER QUICK LINK - H100097
(13) CT - SCREW TAPPING 8x1/2 - H100123
(2) - T-40 Torx Wrench - A100041
Hardware
(2) - BOLT HEX 5/16x3-1/4 - H100050
(2) - T-30 Torx Bit - H100147
(9) KW - WASHER LOCK EXT 8x15 - H100139
(17) CJ - NUT LOCK 5/16 - H100110
(2) - T-40 Torx Bit - A100042
(11) XI - JOINT CONNECTOR 5/16 X 2 1/2 - H100065
Parts Identification
Accessories
(NOT TO SCALE)
(1) DN - GLIDER SEAT DARK GREEN - A100025
(2) DO - CAPTAINS GLIDER ARM YELLOW - A100026
(6) EA - HAND GRIP YELLOW PLASTIC - A100043
(5) EC - METAL RUNG 559 - A100045
(2) EJ - L BRACKET 54x67 - A100053
(4) XK - SQUARE ANGLE BRACKET - A100413
(1) EM - SLIDE BED 8' YELLOW - A100056
(1) HY - TARP 1522x2119 - A100062
(1) EL - SLIDE RAIL 8' GREEN LEFT - A100055
(1) EK - SLIDE RAIL 8' GREEN RIGHT - A100054
Parts Identification
Accessories
(NOT TO SCALE)
(1) HC - BYD ID TAG (LARGE) 2011 WITH AGES - A100164
(1) TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326
(2) EW - GLIDER SUPPORT BYD GREEN - A100065
(4) EX - GLIDER BUSHING BYD GREEN - A100066
(1) TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325
(4) EY - TUBING CAP GLIDER SUPPORT - A100067
(2) XF - TRIANGLE PLATE - A100411
(2) GD - L BRACKET 66x66x127 - A100140
(4) XH - MONKEY BAR LADDER RUNG - A100412
(2) FB - SWING SEAT YELLOW - A100070
(4) EZ - CHAIN GREEN 51.25" - A100068
(8) FA - QUICK LINK - A100069
(4) JD - CHAIN GREEN 45" - A100092
(1) SQ - "A" REVISION TAG - A100314
(8) KC - METAL GROUND STAKE BROWN - A100178
4 Ft Ladder
Phase 1 & 2
Phase Notes
• Assemble with hardware as shown.
• Center rungs in rail grooves.
QTY
1
DESCRIPTION
LEFT UPRIGHT
LABEL
H74
4
8
LADDER RUNG
SCREW PFH 8x2
H76
SCREW PFH 8x2
H74
H76
QTY
1
8
DESCRIPTION
RIGHT UPRIGHT
SCREW PFH 8x2
H75
SCREW PFH 8x2
LABEL
H75
4 Ft Ladder
Phase 3
Phase Notes
• Assemble with hardware as shown.
M73
SCREW PFH 8x2
QTY
1
4
DESCRIPTION
REAR SUPPORT
SCREW PFH 8x2
LABEL
M73
(1)
SB74 - SWING BEAM EXTENDED - W102419
2"x5 1/4"x89 1/2" (50x134x2274)
(2) GD - L BRACKET 66x66x127 - A100140
(1) TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326
(1) TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325
4 FT GREEN EXTENDED
SWING BEAM WITH GLIDER
(3)
STEP 1
ATTACH (2) GD BRACKETS TO SB74 SWING BEAM
USING (2) 2-3/4" BOLTS, FLAT WASHERS AND 5/16"
LOCK NUT, AS SHOWN.
BOLT WH
5/16x1-3/4
BOLT HEX
(2)
5/16x2-3/4
GD
(3)
NUT BARREL
WH 5/16x7/8
(4)
WASHER
FLAT 8x27
(2)
NUT LOCK
5/16
ATTACH TB AND TC SWING BEAM EXTENSION
BRACKETS TO SB74 SWING BEAM USING (3) 1-3/4"
BOLTS AND 7/8" BARREL NUTS, AS SHOWN.
SB74
FOR EASE OF ASSEMBLY LATER
FINGER TIGHTEN THESE FASTENERS
TB
TC
(1)
W71 - SWING BEAM SUPPORT - W102420
2"x3 3/8"x49 5/8" (50x86x1260)
(1)
(2)
H80 - GROUND BOARD - W100990
1"x3 3/8"x87 3/8" (24x86x2218)
E77 - ANGLE BRACE - W100991
1 3/8"x3 3/8"x74 3/8" (36x86x1890)
(1)
H79 - END SUPPORT - W100992
1"x3 1/2"x42" (24x86x1072)
STEP 2
ATTACH H80 GROUND BOARD TO (2) E77
ANGLED SUPPORT BOARDS USING (2) 2"
BOLTS, LOCK WASHERS AND 7/8" BARREL
NUTS, AS SHOWN.
(4)
ATTACH (2) E77 ANGLED SUPPORT BOARDS
TO W71 SUPPORT USING 4- 1/2" BOLT, LOCK
WASHERS AND 7/8" BARREL NUT, AS SHOWN.
(1)
ATTACH H79 BOARD TO W71 BOARD USING
(2) 2" LAG SCREWS AND LOCK WASHERS.
NEXT, SECURE THE ENDS OF H79 BOARD TO
E77 ANGLED SUPPORTS USING (2) 2" BOLTS,
LOCK WASHERS AND 7/8" BARREL NUTS, AS
SHOWN.
(5)
LAG SCREW
WH 5/16x2
NUT BARREL
WH 5/16x7/8
WASHER
WASHER
(7) LOCK EXT (5) LOCK EXT
12x19
8x19
E77
E77
H79
H80
BOLT WH
5/16x4-1/2
(2)
W71
BOLT WH
5/16x2
STEP 3
INSERT W71 BOARD INTO TB AND TC BRACKET OPENING AND SECURE USING (2) 1-3/4"
BOLTS AND 7/8" BARREL NUTS, AS SHOWN.
INSERT (2) 2-1/2" BOLTS, LOCK WASHERS AND 1-1/2" BARREL NUTS INTO THE EDGE OF
W71 BOARD, AS SHOWN.
(2)
(2)
BOLT WH
5/16x1-3/4
(2)
BOLT WH
5/16x2-1/2
NUT BARREL
WH 5/16x7/8
NUT BARREL
(2)
WH 5/16x1-1/2
WASHER
WASHER
(2) LOCK EXT (2) LOCK EXT
12x19
8x19
SB74
FINISH TIGHTENING THESE FASTENERS
TB
TC
W71
THESE BOLTS ARE REQUIRED
FOR IMPROVED STRUCTUAL
STRENGHT OF W71 SUPPORT
AND MUST BE INSTALLED.
(4) EY - TUBING CAP GLIDER SUPPORT - A100067
(4) EX - GLIDER BUSHING BYD GREEN - A100066
(2) EW - GLIDER SUPPORT BYD GREEN - A100065
STEP 4
USING EW GLIDER SUPPORTS AS A GUIDE, USE A 3/16" TO PRE DRILL HOLES INTO SB74
SWING BEAM.
ATTACH (2) EW GLIDER SUPPORT BARS TO SB74 SWING BEAM USING (2) 5-3/4" BOLTS,
FLAT WASHERS AND 5/16" LOCK NUTS AND (2) 2-1/2" LAG SCREWS, AS SHOWN.
INSERT (4) SWING HANGER QUICK LINKS INTO (4) EX BUSHINGS AND THEN ATTACH
SWING HANGER QUICK LINKS TO EW GLIDER SUPPORTS USING (4) FLAT WASHERS AND
5/16" LOCK NUTS, AS SHOWN.
(4)
SWING
HANGER (2) BOLT WH
5/16x5-3/4
QUICK LINK
INSERT (4) EY GLIDER SUPPORT CAPS INTO THE ENDS OF EW GLIDER SUPPORTS, AS
SHOWN.
(6)
WASHER
FLAT 8x27
LAG SCREW
(2)
WH 5/16x2-1/2
NUT LOCK
(6)
5/16
SB74
EW
EW
EY
EX
STEP 5
INSERT (4) SWING HANGER QUICK LINK INTO SB74 SWING BEAM USING (4) SAFETY
WASHERS, FLAT WASHERS AND 5/16" LOCK NUTS, AS SHOWN.
(4)
NUT LOCK
5/16
(4)
WASHER
FLAT 8x27
(4)
WASHER
SAFETY
17x30
SB74
(4)
SWING
HANGER
QUICK LINK
(2)
E4 - MONKEY BAR TOP - W103945
1 3/8"x3 3/8"x71 3/8" (36x86x1814)
(4) XK - SQUARE ANGLE BRACKET - A100413
(5) EC - METAL RUNG 559 - A100045
(2) XF - TRIANGLE PLATE - A100411
STEP 1
LAY TWO E4 MONKEY BAR TOP FLAT ON GROUND.
(10)
ATTACH EC RUNGS TO E4 MONKEY BAR BOARDS
JOINT
CONNECTOR
5/16 X 2-1/2
E4
EC
(10)
(10)
WASHER
FLAT 8x19
WASHER
LOCK INT
8x15
E4
STEP 2
ATTACH XF BRACKETS TO OUTSIDE OF E4 BOARDS, AND XK BRACKETS TO INSIDE AND
OUTSIDE OF E4 BOARDS AS SHOWN.
NUT LOCK 5/16
(2)
(2)
BOLT HEX
5/16x1-1/2
BOLT HEX
5/16x2
WASHER FLAT 8x19
XK
WASHER FLAT 8x19
WASHER LOCK INT 8x15
BOLT HEX 5/16x2
(6)
WASHER
FLAT 8x19
(4)
WASHER
LOCK INT
8x15
(4)
T-NUT 5/16
(2)
WASHER FLAT 8x19
WASHER LOCK INT 8x15
BOLT HEX 5/16x1-1/2
XF
NUT LOCK
5/16
(2)
E6 - MONKEY BAR UPRIGHTS - W103946
1 3/8"x3 3/8"x82 7/8" (36x86x2105)
(4) XH - MONKEY BAR LADDER RUNG - A100412
STEP 3
TAP XH LADDER RUNGS INTO E6 BOARDS USING A RUBBER
MALLET OR HAMMER AND A BLOCK.
E6
XH
E6
(1)
G1 - MONKEY BAR GROUND BOARD - W103947
1"x5 1/4"x79 1/2" (24x134x2020)
STEP 4
USING G1 AS A GUIDE PRE DRILL 3/16"
HOLES IN CENTER OF E6 BOARDS.
ATTACH G1 GROUND BOARD TO E6 BOARDS
AS SHOWN.
E6
(2)
LAG SCREW
HEX
5/16x2-1/2
E6
(2)
(2)
G1
LAG SCREW HEX 5/16x2-1/2
(2 PLCS)
WASHER FLAT 8x19
(2 PLCS)
WASHER LOCK INT 8x15
(2 PLCS)
WASHER
FLAT 8x19
WASHER
LOCK INT
8x15
(2)
E5 - MONKEY BAR ANGLE BRACES - W103948
1 3/8"x3 3/8"x54 1/2" (36x86x1385)
STEP 5
USING G1 BOARD AS A GUIDE DRILL (2) 3/16" HOLES IN EACH
E5 BOARD.
ATTACH (2) E5 BOARDS TO E6 AND G1 BOARDS AS SHOWN.
(4)
BOLT HEX 5/16x3-1/4
(2PLCS)
(2)
BOLT HEX
5/16x3-1/4
T-NUT 5/16
(2 PLCS)
E6
(6)
WASHER
FLAT 8x19
(6)
WASHER
LOCK INT
8x15
(2)
T-NUT 5/16
WASHER FLAT 8x19
(2 PLCS)
E6
WASHER LOCK INT 8x15
(2 PLCS)
WASHER LOCK INT 8x15
(4 PLCS)
E5
WASHER FLAT 8x19
(4 PLCS)
E5
LAG SCREW HEX 5/16x2
(4 PLCS)
G1
LAG SCREW
HEX 5/16x2
TOP ASSEMBLY
LADDER ASSEMBLY
STEP 6
ATTACH E4 BOARDS TO E6 BOARDS USING XF
TRIANGLE BRACE AS SHOWN.
WASHER LOCK INT 8x15
(2 PLCS)
WASHER FLAT 8x19
(2 PLCS)
BOLT HEX 5/16x3
(2 PLCS)
T-NUT 5/16
(2 PLCS)
BOLT HEX 5/16x1-1/2
(2 PLCS)
E4
WASHER FLAT 8x19
(2 PLCS)
XF
WASHER LOCK INT 8x15
(2 PLCS)
E4
XF
E6
E6
BOLT HEX
5/16x1-1/2
(2)
(2)
BOLT HEX
5/16x3
(2)
T-NUT 5/16
(4)
WASHER
FLAT 8x19
(4)
WASHER
LOCK INT
8x15
(2) EA - HAND GRIP YELLOW PLASTIC - A100043
STEP 7
PRE DRILL WITH 1/8" BIT AND ATTACH EA
HAND GRIPS AS SHOWN.
(4)
E6
E6
WASHER LOCK INT 8x15
(4 PLCS)
WASHER FLAT 9x18
(4 PLCS)
SCREW TAPPING 14x1-1/2
(4 PLCS)
67 1/4"
EA
SCREW
TAPPING
14x1-1/2
(4)
WASHER
FLAT 8x19
(4)
WASHER
LOCK INT
8x15
8 FOOT SLIDE ASSEMBLY
PHASE 1
STEP 1
TOP
● PLACE SLIDE BRACE CENTERED ON THE BOTTOM 1/4" FROM THE EDGE. TRANSFER HOLES
ON THE BOARD THROUGH THE SLIDE BED AS SHOWN BELOW. USE A 3/8" DRILL BIT.
● ATTACH SLIDE BRACE TO SLIDE USING HARDWARE SHOWN.
QTY
1
3
3
3
1
DESCRIPTION
SLIDE BRACE
BOLT WH 5/16x1/2
NUT BARREL WH 5/16x5/8
WASHER LOCK EXT 12x19
SLIDE BED 8' YELLOW
(SEE SLIDE ASSEMBLY
INSTALLATION STEP FOR
TOP MOUNTING HOLE
DRILLING LOCATIONS).
BOTTOM
SLIDE BED 8' YELLOW
NUT BARREL WH 5/16x5/8
WASHER LOCK EXT 12x19
M77 SLIDE BRACE
BOLT WH 5/16x1/2
USE M77 SLIDE BRACE AS A TEMPLATE
FOR DRILLING BOTTOM HOLE PATTERN
IN SLIDE BED. BE SURE TO PLACE
SLIDE BRACE UP 1/4" FROM BOTTOM
EDGE OF SLIDE BED BEFORE MARKING
HOLE PATTERN.
TIP: PREBENDING THE ENDS WILL EASE ASSEMBLY.
REV 8/02/11 BRS
8 FOOT SLIDE ASSEMBLY
PHASE 2
STEP 2
● PLACE 1 SLIDE RAIL ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF THE
SLIDE RAIL (FIG. 1). PUT SLIDE SUPPORT BOTTOM INTO THE SUPPORT POCKET AT THE BOTTOM OF THE
RAIL AND HAVE A HELPER BEND THE SLIDE BED TOWARDS THE TOP OF THE SLIDE AND INSERT
THE BED INTO THE SLIDE CAVITY. MAKE SURE SLIDE BED IS COMPLETELY DOWN IN THE SLIDE
CAVITY. SECURE USING (12) 3" WOOD SCREWS AT EACH OF THE PILOT HOLE LOCATIONS AS SHOWN BELOW.
● PLACE THE OTHER SLIDE RAIL ON A FLAT SURFACE WITH THE SLIDE CAVITY UP. HAVE A HELPER
HOLD THE TOP END OF SLIDE BED AND BEGIN INSERTING THE SLIDE BED AND SLIDE BRACES INTO
THE CAVITY AND SUPPORT POCKETS STARTING AT THE BOTTOM OF SLIDE AND WORKING UP TO
THE TOP(FIG. 2). SECURE USING (12) 3" WOOD SCREWS AT EACH OF THE PILOT HOLE LOCATIONS AS SHOWN BELOW.
SLIDE RAIL 8' GREEN RIGHT
NOTE:
MAKE CERTAIN
SUPPORTS AND SLIDE
BED ARE FULLY
ENGAGED WITHIN
CHANNEL OF SLIDE
RAILS.
M78 CENTER SLIDE BRACE
SLIDE RAIL 8' GREEN LEFT
QTY
DESCRIPTION
2
24
M78 CENTER SLIDE BRACE
SCREW PFH 8x3
1
1
SLIDE RAIL 8' GREEN RIGHT
SLIDE RAIL 8' GREEN LEFT
SCREW PFH 8x3
FIG. 1
FIG. 2
TIP: A HELPER IS REQUIRED FOR THIS PHASE.
(2)
E2 - UPRIGHT - W101260
1 3/8"x3 3/8"x81 3/4" (36x86x2076)
(2)
M5 - FACE BOARD - W101599
5/8"x3 3/8"x43 1/8" (16x86x1094)
STEP 1
ATTACH E2 BOARDS TO M5 BOARDS USING HARDWARE AS SHOWN
THROUGH PRE DRILLED HOLES.
NOTE THE ORIENTATION OF THE HOLES WITH THE E2 BOARDS.
(6)
E2
E2
SCREW PFH 8x1 1/2
(6 PLCS)
M5
LINE UP HOLES
WITH PILOT IN E2
M5
NOTE THE HOLES
THAT ARE USED
SCREW PFH
8x1 1/2
(1)
E3 - UPRIGHT - W101256
1 3/8"x3 3/8"x81 3/4" (36x86x2076)
(1)
E1 - UPRIGHT - W101261
1 3/8"x3 3/8"x81 3/4" (36x86x2076)
(2)
M6 - LOWER FACE BOARD - W101598
5/8"x3 3/8"x38 5/8" (16x86x982)
(1)
L5 - GROUND BOARD - W100686
5/8"x4 3/8"x30" (16x112x762)
STEP 2
ATTACH THE L5 BOARDS AND THE M6 BOARD TO THE E3 AND E1 BOARDS
USING HARDWARE AS SHOWN THROUGH PRE DRILLED HOLES.
NOTE THE ORIENTATION OF THE E3 AND E1 BOARDS.
(4)
LAG SCREW
WH 5/16x2
(10)
E3
M6
E1
M6
(4)
WASHER
LOCK EXT
8x19
SCREW PFH 8x1 1/2
(10 PLCS)
L5
LAG SCREW WH 5/16x2
(4 PLCS)
WASHER LOCK EXT 8x19
(4 PLCS)
SCREW PFH
8x1 1/2
(2)
L2 - GROUND BOARD - W100684
5/8"x4 3/8"x60 1/8" (16x112x1528)
STEP 3
(8)
ATTACH THE L2 BOARDS TO THE E1, E3 AND E2 BOARDS USING
HARDWARE AS SHOWN THROUGH PRE DRILLED HOLES.
BOLT WH 5/16x1 1/2
(8 PLCS)
NUT BARREL
WH 5/16x7/8
(8)
WASHER
LOCK EXT
12x19
(8)
BOLT WH
5/16x1 1/2
(8)
WASHER
LOCK EXT
8x19
NUT BARREL WH 5/16x7/8
(8 PLCS)
WASHER LOCK EXT 8x19
(8 PLCS)
WASHER LOCK EXT 12x19
(8 PLCS)
E1
E3
E2
L2
E2
L2
(1)
L3 - GROUND BOARD - W101602
5/8"x4 3/8"x46 7/8" (16x112x1191)
(1)
M9 - ANGLE BRACE - W100696
5/8"x3 3/8"x35 5/8" (16x86x904)
(1)
M10 - SAFETY BOARD - W100701
5/8"x3 3/8"x33 7/8" (16x86x860)
STEP 4
ATTACH M10 AND L3 BOARDS TO THE M5 BOARDS USING HARDWARE AS
SHOWN THROUGH PRE DRILLED HOLES.
(2)
NUT BARREL
WH 5/16x5/8
ATTACH M9 BOARD TO THE M10 AND THE L3 BOARD USING HARDWARE AS
SHOWN THROUGH PRE DRILLED HOLES.
(6)
E2
LAG SCREW WH 5/16x2 1/2
(2 PLCS)
(2)
E2
M5
LAG SCREW
WH 5/16x2 1/2
BOLT WH
5/16x1
(8)
WASHER
LOCK EXT
8x19
(2)
WASHER
LOCK EXT
12x19
M5
WASHER LOCK EXT 8x19
(2 PLCS)
M10
M9
L3
BOLT WH 5/16x1
(2 PLCS)
WASHER LOCK EXT 8x19
(2 PLCS)
WASHER LOCK EXT 12x19
(2 PLCS)
NUT BARREL WH 5/16x5/8
(2 PLCS)
(1)
L1 - FLOOR RAIL - W101254
5/8"x4 3/8"x60 1/8" (16x112x1528)
(1)
M13 - FLOOR RAIL - W102867
5/8"x3 3/8"x60 1/8" (16x86x1528)
STEP 5
ATTACH M13 BOARD TO THE E1 BOARD AND THE E2 BOARD USING HARDWARE
SHOWN THROUGH PRE DRILLED HOLES. NOTE THE ORIENTATION OF HOLES THAT
WILL BE USED LATER IN THE M13 BOARD.
ATTACH L1 BOARD TO E3 BOARD AND E2 BOARD USING HARDWARE AS SHOWN
THROUGH PRE DRILLED HOLES.
BOLT WH 5/16x2
(8 PLCS)
T-NUT 5/16
(8 PLCS)
WASHER LOCK EXT 8x19
(8 PLCS)
E1
E3
M13
E2
L1
E2
(8)
BOLT WH
5/16x2
(8)
T-NUT 5/16
(8)
WASHER
LOCK EXT
8x19
(1)
M14 - FLOOR SUPPORT BOARD - W103944
5/8"x3 3/8"x30" (16x86x762)
(1)
L4 - FLOOR RAIL - W101603
5/8"x4 3/8"x30" (16x112x762)
STEP 6
ATTACH L4 BOARD TO E2 BOARDS AND ATTACH M14 BOARD TO E1 AND E3
BOARDS USING HARDWARE AS SHOWN THROUGH PRE DRILLED HOLES.
(6)
LAG SCREW
WH 5/16x2
(6)
WASHER
LOCK EXT
8x19
WASHER LOCK EXT 8x19
(6 PLCS)
LAG SCREW WH 5/16x2
(6 PLCS)
M14
E2
E2
L4
E1
E3
THESE HOLES GO
TOWARDS BOTTOM
OF BOARD
(2)
SP1 - FLOOR SUPPORT CLEAT - W100711
1"x1"x53 3/8" (24x24x1356)
(2)
(4)
F71 - STANDARD ANGLE BRACE - W100689
1 3/8"x2 3/8"x13" (36x60x330)
J2 - END FLOOR CLEAT - W100710
1"x2 3/8"x3 3/8" (24x60x86)
STEP 7
FIRST ATTACH A F71 BRACE TO A M13 BOARD AND A F71 BRACE TO A L1
BOARD USING HARDWARE AS SHOWN THROUGH PRE DRILLED HOLE.
(2)
NUT BARREL
WH 5/16x7/8
PRE DRILL WITH 3/16" BIT AND ATTACH THE F71 BRACES TO E2 BOARDS.
(2)
ATTACH A SP1 BOARD TO M13 BOARD AND L1 BOARD RESTING ON F71
BRACES. USING HARDWARE AS SHOWN THROUGH PRE DRILLED HOLES.
(2)
ATTACH J2 BOARDS TO EACH E2 BOARD AND TO THE E1 AND E3 BOARDS. THE
TOP OF THE J2 BOARDS SHOULD BE FLUSH WITH THE TOP OF THE SP1
BOARDS. ATTACH THROUGH PRE DRILLED HOLES WITH HARDWARE SHOWN.
WASHER LOCK EXT 8x19
(2 PLCS)
BOLT WH 5/16x1 1/2
(2 PLCS)
WASHER LOCK EXT 12x19
(2 PLCS)
NUT BARREL WH 5/16x7/8
(2 PLCS)
E1
E2
M13
FLUSH
J2
SP1
E3
E2
L1
F71
SCREW PFH 8x1 1/2
(18 PLCS)
LAG SCREW WH 5/16x2 1/2
(2 PLCS)
VERIFY THAT FORT IS
STILL SQUARE, BEFORE
FASTENING F71 BOARDS
TO E2 BOARDS
WASHER LOCK EXT 8x19
(2 PLCS)
45 13/16"
LAG SCREW
WH 5/16x2 1/2
BOLT WH
5/16x1 1/2
(18)
SCREW PFH
8x1 1/2
(4)
WASHER
LOCK EXT
8x19
(2)
WASHER
LOCK EXT
12x19
(4)
F71 - STANDARD ANGLE BRACE - W100689
1 3/8"x2 3/8"x13" (36x60x330)
(1)
J3 - FLOOR JOIST - W100984
1"x2 3/8"x60 1/8" (24x60x1528)
STEP 8
ATTACH F71 BRACES TO L4 AND M14 BOARDS THROUGH PRE DRILLED HOLES WITH
HARDWARE AS SHOWN
(4)
NUT BARREL
WH 5/16x7/8
(4)
BOLT WH
5/16x1 1/2
PRE DRILL E1, E3, AND E2 UPRIGHTS AND FASTEN F71 BRACES TO THEM WITH
HARDWARE AS SHOWN
ATTACH J3 FLOOR JOIST TO M14 AND L4 BOARDS WITH BOTTOM OF J3 JOIST BEING
3/8" FROM BOTTOM OF M14 AND L4 BOARDS WITH HARDWARE SHOWN THROUGH PRE
DRILLED HOLES.
(4)
NUT BARREL WH 5/16x7/8
(4 PLCS)
WASHER LOCK EXT 12x19
(4 PLCS)
WASHER LOCK EXT 8x19
(4 PLCS)
SCREW PFH
8x1 1/2
(8)
WASHER
LOCK EXT
8x19
(4)
WASHER
LOCK EXT
12x19
L4
BOLT WH 5/16x1 1/2
(4 PLCS)
E2
F71
LAG SCREW WH 5/16x2
(4 PLCS)
E2
WASHER LOCK EXT 8x19
(4 PLCS)
J3
E3
M14
E1
3/8"
VERIFY THAT FORT IS
STILL SQUARE, BEFORE
FASTENING F71 BOARDS
TO E1, E2 AND E3 BOARDS
(2)
L9 - END FLOOR BOARD - W102863
5/8"x4 3/8"x29 7/8" (16x112x760)
STEP 9
PLACE L9 BOARDS ON THE J3 FLOOR JOIST AND J2 SUPPORT BOARDS. L9
BOARD WILL SIT UP AGAINST THE E2 BOARDS AND THE E3 AND E1 BOARD AS
SHOWN.
ATTACH L9 BOARDS TO J2 BOARDS AND J3 FLOOR JOIST THROUGH PRE
DRILLED HOLES.
SCREW PFH 8x1 1/2
(10 PLCS)
(10)
E3
E2
J2
L1
SP1
L4
J3
L9
E2
E1
M13
SCREW PFH
8x1 1/2
(3) FP1 - FLOOR PANEL - W102861
STEP 10
ATTACH FP1 FLOOR PANELS TO SP1 BOARDS AND J3 FLOOR JOIST
USING HARDWARE AS SHOWN THROUGH PRE DRILLED HOLES.
FP1
SCREW PFH 8x1 1/2
(45 PLCS)
(45)
SCREW PFH
8x1 1/2
(1)
M12 - ROCK WALL ARCH BOARD - W102862
5/8"x3 3/8"x30" (16x86x762)
(2)
M11 - UPPER FACE BOARD - W102866
5/8"x3 3/8"x26 5/8" (16x86x676)
STEP 11
ATTACH 1/4" T-NUTS TO M12 BOARDS AS SHOWN.
ATTACH M11 BOARDS TO E1 BOARD AND E3 BOARD WITH HARDWARE AS SHOWN
THROUGH PRE DRILLED HOLES.
(4)
LAG SCREW
WH 5/16x2
(4)
WASHER
LOCK EXT
8x19
(4)
T-NUT 1/4
LAG SCREW WH 5/16x2
(4 PLCS)
E3
WASHER LOCK EXT 8x19
(4 PLCS)
SCREW PFH 8x1 1/2
(4 PLCS)
E1
M12
M11
T-NUT 1/4
(4 PLCS)
SCREW PFH
8x1 1/2
(8)
ATTACH M12 BOARD TO E3 AND E1 BOARDS THROUGH PRE DRILLED HOLES WITH
HARDWARE AS SHOWN.
M11
(1)
L6 - ARCHED RAIL - W100694
5/8"x4 3/8"x60 1/8" (16x112x1528)
(1)
L7 - ARCHED SCULPTURED RAIL - W100695
5/8"x4 3/8"x60 1/8" (16x112x1528)
STEP 12
ATTACH L6 BOARD AS SHOWN TO E1 AND E2 BOARDS THROUGH PRE DRILLED
HOLES USING HARDWARE AS SHOWN.
(8)
ATTACH L7 BOARD AS SHOWN TO E3 AND E2 BOARDS THROUGH PRE DRILLED
HOLES USING HARDWARE AS SHOWN.
E1
E3
L6
(8)
NUT BARREL
WH 5/16x7/8
BOLT WH
5/16x1 1/2
(8)
WASHER
LOCK EXT
8x19
(8)
WASHER
LOCK EXT
12x19
L7
E2
E2
NUT BARREL WH 5/16x7/8
(8 PLCS)
WASHER LOCK EXT 8x19
(8 PLCS)
WASHER LOCK EXT 12x19
(8 PLCS)
BOLT WH 5/16x1 1/2
(8 PLCS)
(1)
K1 - ROOF SWING BEAM SUPPORT - W100682
5/8"x5 1/4"x51 5/8" (16x134x1310)
(1)
K2 - ROOF SUPPORT - W103949
5/8"x5 1/4"x51 5/8" (16x134x1310)
STEP 13
ATTACH 5/16 T NUTS TO K1 BOARD AS SHOWN AND ATTACH TO E2
BOARDS THROUGH PRE DRILLED HOLES WITH HARDWARE AS SHOWN.
ATTACH K2 BOARD TO E1, E2, AND E3 BOARDS WITH HARDWARE AS
SHOWN THROUGH PRE DRILLED HOLES.
(8)
WASHER LOCK EXT 8x19
(8 PLCS)
LAG SCREW WH 5/16x2
(8 PLCS)
E3
T-NUT 5/16
(6 PLCS)
K2
K1
E2
E1
E2
LAG SCREW
WH 5/16x2
(8)
WASHER
LOCK EXT
8x19
(6)
T-NUT 5/16
(1)
M1 - TENT SUPPORT - W101601
5/8"x3 3/8"x59 1/4" (16x86x1504)
(2) WP1 - FLOOR PANEL - W102865
STEP 14
ATTACH M1 BOARD TO K1 AND L4 BOARDS AS SHOWN.
ATTACH WP1 WALL PANELS TO M1, K1 AND L4 BOARDS AS SHOWN.
SCREW PFH
8x1 1/8
(28)
(3)
M1
K1
BOLT WH
5/16x1 1/4
(3)
WASHER
LOCK EXT
8x19
(1)
T-NUT 5/16
WP1
L4
SCREW PFH 8x1 1/8
(28 PLCS)
WASHER LOCK EXT 8x19
(3 PLCS)
BOLT WH 5/16x1 1/4
(3 PLCS)
T-NUT 5/16
(1 PLCS)
(1)
M8 - WALL RAIL - W100700
5/8"x3 3/8"x35 7/8" (16x86x910)
(1)
M7 - WALL BOARD - W100708
5/8"x3 3/8"x35 1/4" (16x86x895)
STEP 15
ATTACH M7 BOARD TO L6 BOARD AND M13 BOARD THROUGH PRE DRILLED
HOLES USING HARDWARE AS SHOWN.
(2)
NUT BARREL
WH 5/16x5/8
ATTACH M8 BOARD TO M7 BOARD AND E1 BOARD USING HARDWARE AS
SHOWN THROUGH PRE DRILLED HOLES.
SCREW PFH
8x1 3/4
(2)
(2)
BOLT WH
5/16x1
(2)
BOLT WH 5/16x1
(2 PLCS)
SCREW PFH
8x1 1/8
(2)
WASHER
LOCK EXT
8x19
(2)
WASHER
LOCK EXT
12x19
NUT BARREL WH 5/16x5/8
(2 PLCS)
WASHER LOCK EXT 8x19
(2 PLCS)
WASHER LOCK EXT 12x19
(2 PLCS)
L6
M7
E1
M8
SCREW PFH 8x1 1/8
(2 PCLS)
SCREW PFH 8x1 3/4
(2 PCLS)
11 1/2"
1 13/16"
M13
(4)
M17 - PICKET - W100705
5/8"x3 3/8"x27 1/8" (16x86x690)
STEP 16
ATTACH M17 PICKETS TO L6 AND M8 BOARDS USING SPACING AND HARDWARE
AS SHOWN THROUGH PRE DRILLED HOLES.
SCREW PFH 8x1 1/8
(16 PLCS)
L6
M17
(16)
M8
3 1/8"
(5 SPCS)
1 13/16"
SCREW PFH
8x1 1/8
(4)
K9-2 - WALL BOARD - W103950
3/8"x3 3/8"x30 1/4" (11x86x768)
(6)
(1)
K9-1 - WALL BOARD - W100713
3/8"x3 3/8"x15 3/4" (11x86x400)
J1 - WINDOW LEDGE - W100709
1"x2 3/8"x29 1/2" (24x60x750)
STEP 17
PLACE 2 K9-2 BOARDS ON FLOOR AGAINST L7 AND K4 BOARDS, AND AGAINST E3 BOARD
LIP OF K9-2 TOUCHING E3 BOARD AND ATTACH WITH HARDWARE AS SHOWN THROUGH
PRE DRILLED HOLES.
ATTACH (6) K9-1 BOARDS AND THE OTHER (2) K9-2 BOARDS L7 AND K4 BOARD AGAINST
PREVIOUSLY ATTACHED K9-2 BOARDS.
ATTACH J1 SHELF TO TOP OF K9-1
BOARDS AND THROUGH PRE DRILLED
HOLES IN K9-1.
L7
K9-2
(28)
SCREW PFH
8x1
E3
PRE-DRILL 2 HOLES IN K9-2 BOARDS AND
FASTEN AS SHOWN.
K9-2
(14)
J1
FRONT
BACK
L1
ORIENTATION OF
K9 BOARDS
K9-1
1 3/4"
SCREW PFH 8x1 1/2
(14 PLCS)
BACK
WALL BOARD
(20 PLCS)
SCREW PFH
8x1 1/2
(2)
M3 - TARP SUPPORT - W100692
5/8"x3 3/8"x60 1/8" (16x86x1528)
STEP 18
ATTACH M3 BOARDS TO K1 AND K2 BOARDS THROUGH PRE DRILLED HOLES USING
HARDWARE AS SHOWN.
SCREW PFH 8x2
(8 PLCS)
(8)
SCREW PFH
8x2
M3
K1
K2
M3
(1)
M16 - TARP SUPPORT - W101237
5/8"x3 3/8"x29 1/8" (16x86x740)
(1)
M4 - TARP TOP SUPPORT - W100693
5/8"x3 3/8"x60 1/8" (16x86x1528)
STEP 19
ATTACH M16 BOARD AS SHOWN TO K2 BOARD.
(4)
SCREW PFH
8x2
(2)
NUT BARREL
WH 5/16x5/8
(2)
BOLT WH
5/16x1
(2)
WASHER
LOCK EXT
8x19
(2)
WASHER
LOCK EXT
12x19
ATTACH M4 BOARD FLUSH TO TOP OF M1 AND M16
BOARDS AS SHOWN.
SCREW PFH 8x2
(4 PLCS)
M4
K1
K2
M16
M1
BOLT WH 5/16x1
(2 PLCS)
WASHER LOCK EXT 8x19
(2 PLCS)
NUT BARREL WH 5/16x5/8
(2 PLCS)
WASHER LOCK EXT 12x19
(2 PLCS)
(1)
HY - TARP 1522x2119 - A100062
1/32"x59 7/8"x83 3/8" (.4x1522x2119)
STEP 20
CENTER HY TARP OVER M4 TARP TOP SUPPORT AND ATTACH USING (4) 1/2" TAPPING
SCREWS, AS SHOWN.
NEXT, DRAPE HY TARP EVENLY OVER (2) M3 TARP SUPPORTS AND WRAP UNDERNEATH
AND UP THE BACK SIDE OF M3 SUPPORT APPROXIMATELY 1-13/16" FROM THE TOP AND
ATTACH USING (8) 1/2" TAPPING SCREWS, AS SHOWN.
(12)
SCREW TAPPING 8x1/2
(12 PLCS)
SCREW
TAPPING
8x1/2
(2)
K9-3 - WALL BOARD - W101257
3/8"x3 3/8"x42" (11x86x1068)
(2)
K9-4 - WALL BOARD - W101239
3/8"x3 3/8"x37 3/8" (11x86x950)
(1)
(6)
L8 - SCULPTURED RAIL - W101240
5/8"x4 3/8"x35 1/2" (16x112x902)
K9-5 - WALL BOARD - W101259
3/8"x3 3/8"x21 3/8" (11x86x544)
STEP 21
ATTACH L8 BOARD TO E3 BOARD FLUSH WITH THE UNDERSIDE OF L1 BOARD
USING HARDWARE AS SHOWN FIG. 1.
(1)
STARTING AGAINST E3 BOARD, ATTACH A K9-3 BOARD FLUSH WITH THE BOTTOM
OF THE SP1 BOARD USING HARDWARE AS SHOWN.
FLUSH ALONG THE BOTTOM ATTACH THE A K9-3, THE (6) K9-5 BOARDS, AND THE
OTHER K9-3 AND K9-4 BOARDS AS SHOWN.
(1)
USING L8 BOARD AS A GUIDE, USE A 3/8" DRILL BIT, PRE DRILL HOLE TO ATTACH
HARDWARE AS SHOWN FIG. 2.
(2)
BOLT WH 5/16x1
NUT BARREL
WH 5/16x5/8 (1)
BOLT WH
5/16x1
WASHER
LOCK EXT
8x19
(1)
(2)
NUT BARREL
WH 5/16x7/8
BOLT WH
5/16x1 1/2
WASHER
LOCK EXT
12x19
WASHER LOCK EXT 8x19
WASHER LOCK EXT 8x19
BOLT WH 5/16x1 1/2
(28)
NUT BARREL WH 5/16x5/8
FIG. 2.
SCREW PFH
8x1
NUT BARREL WH 5/16x7/8
WASHER LOCK EXT 12x19
WASHER LOCK EXT 12x19
FIG. 1.
L1
L8
E3
SCREW PFH 8x1
K9-4
K9-3
(28 PLCS)
K9-3
BACK
FRONT
K9-4
L2
(2)
H3 - SERVING BOARD SUPPORT - W101606
1"x3 3/8"x3 3/8" (24x86x86)
(1)
H1 - SERVING SHELF SUPPORT - W101604
1"x3 3/8"x30 3/4" (24x86x780)
(1)
K3 - SERVING BOARD - W101605
5/8"x5 1/4"x28 3/4" (16x134x729)
STEP 22
ATTACH H3 SHELF SUPPORTS TO K3 AND H1 BOARDS USING HARDWARE
AS SHOWN THROUGH PRE DRILLED HOLES.
K3
SCREW PFH 8x1 1/2
(4)
SCREW PFH
8x2
(9)
SCREW PFH
8x1 1/2
(22)
SCREW PFH
8x1 1/4
H1
H3
SCREW PFH 8x2
STEP 23
ATTACH THE SHELF BUILT IN THE PREVIOUS STEP TO THE K9-3, K9-4,
AND K9-5 WALL BOARDS BY RESTING THE K3 BOARD ON TOP OF THE
OPENING AND FASTENING WITH HARDWARE SHOWN THROUGH PRE
DRILLED HOLES.
SCREW PFH 8x1 1/4
(22 PLCS)
(4) EA - HAND GRIP YELLOW PLASTIC - A100043
STEP 24
ATTACH EA HANDLE TO E2 BOARD USING HARDWARE AS SHOWN (FIG. 1).
INSERT 1/4" T-NUTS INTO M7 BOARD AND ATTACH EA HANDLE AS SHOWN (FIG.
2).
(6)
BOLT PTH
1/4x1
(2)
ATTACH 2 EA HANDLES TO M11 BOARDS USING PREVIOUSLY INSERTED T-NUTS.
(2)
M7
SCREW
TAPPING
14x1-1/2
T-NUT 1/4
(8)
WASHER
FLAT 9x18
(8)
WASHER
LOCK INT
8x15
E2
M11
M11
EA
8"
T-NUT 1/4
(2 PLCS)
BOLT PTH 1/4x1
(6 PLCS)
FIG. 2
FIG. 1
WASHER LOCK INT 8x15
(8PLCS)
SCREW TAPPING 14x1-1/2
(2PLCS)
WASHER FLAT 9x18
(8PLCS)
(2)
M2 - BENCH SEAT - W102469
5/8"x3 3/8"x27 3/8" (16x86x694)
(2)
H4 - BENCH SEAT SUPPORT - W102470
1"x3 3/8"x6 1/2" (24x86x166)
(2) EJ - L BRACKET 54x67 - A100053
H5 - BENCH UPRIGHT - W102471
(2)
1"x3 3/8"x11 3/4" (24x86x300)
(2)
H6 - BENCH GROUND BOARD - W102472
1"x3 3/8"x18 1/8" (24x86x460)
STEP 27
ATTACH (2) EJ BRACKETS TO H6
BENCH GROUND BOARDS USING
(2) 1/2" BOLT, LOCK WASHERS
AND 7/8" BARREL NUT, AS
SHOWN.
(2)
BOLT WH
5/16x1/2
(24)
(2)
SCREW PFH
8x1 3/4
WASHER
LOCK EXT
12x19
(2)
NUT BARREL
WH 5/16x7/8
ATTACH H5 BENCH UPRIGHTS TO H6 BENCH GROUND
BOARDS USING (8) 1-3/4" WOOD SCREWS, AS SHOWN.
ATTACH H4 BENCH SEAT SUPPORTS TO H5 BENCH
UPRIGHTS USING (8) 1-3/4" WOOD SCREWS, AS SHOWN.
ATTACH M2 BENCH SEATS TO H4 BENCH
SEAT SUPPORTS USING (8) 1-3/4" WOOD
SCREWS, AS SHOWN.
(1) - BENCH ASSEMBLY
STEP 26
USING BENCH ASSEMBLY BRACKETS AS A TEMPLATE, DRILL TWO 3/8" THRU HOLES
AND ATTACH EJ BRACKET TO L2 GROUND BOARD USING (2) 1/2" BOLTS, LOCK
WASHERS AND 5/8" BARREL NUTS, AS SHOWN.
(2)
BOLT WH
5/16x1/2
(2)
WASHER
LOCK EXT
12x19
(2)
7-1/2" BENCH LOCATION
NUT BARREL WH 5/16x5/8
(2 PLCS)
BOLT WH 5/16x1/2
(2 PLCS)
WASHER LOCK EXT 12x19
(2 PLCS)
NUT BARREL
WH 5/16x5/8
(1) - SLIDE ASSEMBLY
STEP 27
CENTER THE WAVE SLIDE ASSEMBLY IN OPENING, AS SHOWN.
USING A 3/8" DRILL BIT, DRILL THREE THROUGH HOLES INTO THE SLIDE BED AND
DECK BOARDS, AS SHOWN BELOW.
(3)
BOLT WH
5/16x1/2
(3)
WASHER
LOCK EXT
12x19
ATTACH THE SLIDE ASSEMBLY TO THE DECK USING (3) 1/2" BOLTS, LOCK WASHERS
AND 5/8" BARREL NUTS, AS SHOWN.
7 5/8"
6 5/16"
6 5/16"
HOLES SHOULD BE APPX
1-1/2" FROM BACK OF SLIDE
1 1/4"
BOLT WH 5/16x1/2
(3 PLCS)
WASHER LOCK EXT 12x19
(3 PLCS)
NUT BARREL WH 5/16x5/8
(3 PLCS)
(3)
NUT BARREL
WH 5/16x5/8
(1) - LADDER ASSEMBLY
STEP 28
CENTER LADDER ON 'M13' BOARD AND PILOT DRILL 3/16" HOLES FOR LADDER
ATTACHMENT.
ATTACH THE LADDER ASSEMBLY TO M13 FLOOR RAIL SUPPORT USING (2) 2-1/2"
LAG SCREWS AND LOCK WASHERS, AS SHOWN.
(2)
LAG SCREW
WH 5/16x2 1/2
(2)
WASHER
LOCK EXT
8x19
WASHER LOCK EXT 8x19
(2 PLCS)
LAG SCREW WH 5/16x2 1/2
(2 PLCS)
(1) - SWING BEAM ASSEMBLY
(1) HC - BYD ID TAG (LARGE) 2011 WITH AGES - A100164
STEP 29
ATTACH SWING BEAM ASSEMBLY TO K1 ROOF SWING BEAM SUPPORT USING (4) 1"
BOLTS, SPLIT WASHERS AND FLAT WASHERS, AS SHOWN BELOW.
ATTACH HC I.D. TAG TO SB74 SWING BEAM USING (4) 5/8" PFH SCREWS, AS SHOWN.
(4)
(4)
SCREW PWH
8x5/8
BOLT HEX
5/16x1
(4)
WASHER
SPLIT 5/16
(8)
WASHER
FLAT 8x27
WASHER SPLIT 5/16
(4 PLCS)
WASHER FLAT 8x27
(4 PLCS)
BOLT HEX 5/16x1
(4 PLCS)
SCREW PWH 8x5/8
(4 PLCS)
(1) - MONKEY BAR ASSEMBLY
STEP 30
ATTACH MONKEY BAR ASSEMBLY TO K2 BOARD USING HARDWARE AS
SHOWN.
(4)
BOLT WH
5/16x1/2
(4)
T-NUT 5/16
T-NUT 5/16
(4 PLCS)
K2
BOLT WH 5/16x1/2
(4 PLCS)
(4) EZ - CHAIN GREEN 51.25" - A100068
(2) FB - SWING SEAT YELLOW - A100070
(2) DO - CAPTAINS GLIDER ARM YELLOW - A100026
(4) JD - CHAIN GREEN 45" - A100092
(1) DN - GLIDER SEAT DARK GREEN - A100025
STEP 31
ATTACH FB SWING SEAT TO (2) EZ CHAINS USING (2) FA QUICK LINKS, AS SHOWN.
REPEAT PROCESS TO ASSEMBLE SECOND SWING ASSEMBLY. NOW, ATTACH EZ
CHAINS TO SWING HANGER QUICK LINKS ALREADY ASSEMBLED TO THE SWING
BEAM.
(8)
QUICK LINK
ATTACH (2) DO CAPTAINS GLIDER ARMS TO DN GLIDER SEAT USING 5 3/4 BOLTS
WITH FLAT WASHERS AND LOCK NUTS AS SHOWN
ATTACH (4) JD CHAINS TO SWING HANGER QUICKLINKS ALREADY ASSEMBLED TO
THE SWING BEAM AND ATTACH GLIDER.
(2)
BOLT WH
5/16x5 3/4
(2)
WASHER
FLAT 8x27
(2)
NUT LOCK
5/16
EZ
FB
FA
DN
BOLT WH 5/16x5 3/4
(2 PLCS)
NUT LOCK 5/16
(2 PLCS)
WASHER FLAT 8x27
(2 PLCS)
DO
(1) SQ - "A" REVISION TAG - A100314
(8) KC - METAL GROUND STAKE BROWN - A100178
Anchoring Instructions
STAKE A
STAKE A
(4)
BOLT WH
1/4x1/2"
BOLT WH
1/4x1
(4)
STAKE A
(8)
WASHER
LOCK EXT
8x15
WASHER
FLAT 9x18
(8)
(8)
NOTE:
NUT BARREL
WH 1/4x5/8
(2)
FAILURE TO USE GROUND STAKES CAN
VOID WARRANTY & CAUSE INJURY!
STAKE B
SCREW PWH
8x5/8
STAKE B
STAKE B
STEP 32
ATTACH TO MONKEY BAR AND SWING
BEAM USING 1" BOLTS, FLAT
WASHERS, 8X19 LOCK WASHERS AND
5/8" BARREL NUTS IN PLACES WHERE
"STAKE A" IS NOTED.
STAKE B
STAKE B
TWIST STAKES INTO GROUND
AGAINST GROUND BOARDS WHERE
SHOWN. ATTACH TO FORT ASSEMBLY
USING 1/2" BOLTS, 8X15 LOCK
WASHERS, WASHERS AND 5/8"
BARREL NUTS IN ALL PLACES WHERE
"STAKE B" IS NOTED.
FINAL STEP
SQ
DOUBLE CHECK EVERY BOLT,
SCREW AND NUT FOR TIGHTNESS.
MAKE SURE EVERY BOARD IS
SECURE AND MAKE SURE THE
PLAY SET IS LEVEL.
M13
ENJOY YOUR NEW PLAY SET!
STEP 33
ATTACH SQ I.D.TAG TO THE INSIDE OF M13
FLOOR RAIL USING (2) 5/8" PWH SCREWS,
AS SHOWN.
STAKE A
STAKE A
Limited Warranty
This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery
brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time
Products.
Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of
one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood,
hardware, and accessories. All wood carries a five (5) year pro-rated warranty against rot and decay. Refer to
the schedule below for charges associated with replacement of parts under this Limited Warranty. In addition,
Backyard Discovery will replace any parts within the first 30 days from date of purchase found to be missing
from or damaged in the original packaging.
This warranty applies to the original owner and registrant and is non-transferable. Regular maintenance is
required to assure maximum life and performance of this product and failure by the owner to maintain the
product according to the maintenance requirements may void this warranty. Maintenance guidelines are
provided in the Owner’s Manual.
This Limited Warranty does not cover:
•
•
•
•
•
•
•
•
Labor for any inspection
Labor for replacement of any defective item(s)
Incidental or consequential damages
Cosmetic defects which do not affect performance or integrity of a part or the entire product
Vandalism, improper use, failure due to loading or use beyond the capacities stated in the applicable
Assembly Manual.
Acts of nature including but not limited to wind, storms, hail, floods, excessive water exposure
Improper installation including but not limited to installation on uneven, unlevel, or soft ground
Minor twisting, warping, checking, or any other natural occurring properties of wood that do not affect
performance or integrity
Backyard Discovery products have been designed for safety and quality. Any modifications made to the
original product could damage the structural integrity of the unit leading to failure and possible injury.
Modification voids any and all warranties and Backyard Discovery assumes no liability for any modified
products or consequences resulting from failure of a modified product.
This product is warranted for RESIDENTIAL USE ONLY. Under no circumstance should a Backyard Discovery
product be used in public settings. Such use may lead to product failure and potential injury. Any and all public
use will void this warranty. Backyard Discovery disclaims all other representations and warranties of any kind,
express or implied.
This Warranty gives you specific legal rights. You may have other rights as well which vary from state to state
or province to province. This warranty excludes all consequential damages, however, some states do not allow
the limitation or exclusion of consequential damages and therefore this limitation may not apply to you.
Pro Rated Part Replacement Schedule
Product Age
All Parts
0-30 days from date of purchase
31 days to 1 year
Customer Pays
$0 and free shipping
$0 + S&H
Wood Rot and Decay Only
1 year
2 years
3 years
4 years
5 years
Over 5 years
$0 and free shipping
20% + S&H
40% + S&H
60% + S&H
80% + S&H
100% + S&H
Rev5/20/10 BRS
Download PDF
Similar pages