advertisement
OWNER’S MANUAL
3D Blu-ray™ / DVD Home
Theater System
Please read this manual carefully before operating your set and retain it for future reference.
BH7520T (BH7520T, S72T1-S/W, S72B1-C)
P/NO : SAC35376208
Getting Started
3
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.
CAUTION : CLASS 1M VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. DO NOT VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.
1
1
4
Getting Started
This device is equipped with a portable battery or accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the
European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled bin symbol is attached to batteries/ accumulators of Your product it means they are covered by European Directive
2006/66/EC.
2. This symbol may be combined with chemical symbols for mercury(Hg), cadmium(Cd) or lead(Pb) if the battery
Contains more that 0.0005% of mercury,0.002% of cadmium or 0.004% of lead.
3. All batteries/accumulators should be disposed separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
4. The correct disposal of Your old batteries/accumulators will help to prevent potential negative consequences for the environment, animal and human health.
5. For more detailed information about disposal of Your old batteries/ accumulators, please contact Your city office, waste disposal service or the shop where You purchased the product.
Getting Started
5
Notes on Copyrights
y Because AACS (Advanced Access Content
System) is approved as content protection system for Blu-ray Disc format, similar to use of
CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product.
y Furthermore, BD-ROM Mark and BD+ are additionally used as content protection systems for Blu-ray Disc format, which imposes certain restrictions including playback restrictions for
BD-ROM Mark and/or BD+ protected contents.
To obtain additional information on AACS, BD-
ROM Mark, BD+, or this product, please contact an authorized Customer Service Centre.
y Many BD-ROM/DVD discs are encoded with copy protection. Because of this, you should only connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted picture from copy-protected discs.
y This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi. Reverse engineering or disassembly is prohibited.
y Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use, display, distribution, or revision of television programs, videotapes, BD-ROM discs, DVDs, CDs and other materials may subject you to civil and/ or criminal liability.
Important Notice for TV colour system
The colour system of this player differs according to currently playing discs.
For example, when the player plays the disc recorded in the NTSC colour system, the image is output as an NTSC signal.
Only the multi system colour TV can receive all signals output from the player.
y If you have a PAL colour system TV, you will see just distorted images when using discs or video contents recorded in NTSC.
y The multi system colour TV changes the colour system automatically according to input signals.
In case that the colour system is not changed automatically, turn it off and then on to see normal images on screen.
y Even if the disc recorded in NTSC colour system are well displayed on your TV, these may not be recorded correctly on your recorder.
>
Caution y Watching a 3D content for a long period time may cause dizziness or tiredness.
y It is not recommended to watch a movie in 3D mode for infirm, child and pregnant woman.
y If you are experiencing headache, tiredness or dizziness while viewing contents in 3D, it is strongly recommended to stop the playback and rest until you feel normal.
1
6
Table of Contents
Table of Contents
1 Getting Started
8 – Playable Discs and symbols used in this manual
9 – About the “ 7” Symbol Display
11 – AVCHD (Advanced Video Codec High
12 – Certain System Requirements
2 Connecting
17 – Attaching the speakers to the player
19 – ARC (Audio Return Channel) function
22 Connections with external device
24 Connecting to your Home Network
26 – Wireless Network Connection
29 – Playback content in the USB device
3 System Setting
31 – Adjust the Setup Settings
4 Operating
40 – Playing a file on a disc/USB device
42 – Playing a file on a network server
44 – Basic operations for video and audio content
45 – Basic operations for photo content
46 – Repeating a specific portion
46 – Viewing content information
47 – Changing content list view
47 – Selecting a subtitle file
48 – Options while viewing a photo
48 – Listening to music while slide show
49 – Displaying content information onscreen
50 – Playing from selected time
50 – Selecting a subtitle language
50 – Hearing a different audio
50 – Watching from a different angle
51 – Changing the TV Aspect Ratio
51 – Changing subtitle code page
51 – Changing the Picture Mode
52 – Presetting the Radio Stations
52 – Deleting all the saved stations
52 – Improving poor FM reception
5 Troubleshooting
57 – Open source software notice
6 Appendix
58 Controlling a TV with the Supplied
58 – Setting up the remote to control your
59 – Network update notification
61 About Nero MediaHome 4 Essentials
62 – Installing Nero MediaHome 4
62 – Sharing files and folders
67 Audio Output Specifications
71 Important Information Relating to
Table of Contents
7
3
4
1
2
5
6
1
8
Getting Started
Introduction
Playable Discs and symbols used in this manual
Media/Term Logo Symbol
Blu-Ray
e y u i
Description
y Discs such as movies that can be purchased or rented.
y “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.
y BD-R/RE discs that are recorded in BDAV format.
y BD-R/RE discs that contain Movie, Music or
Photo files.
y ISO 9660+JOLIET, UDF and UDF Bridge format
DVD-ROM
DVD-R
DVD-RW
DVD+R
DVD+RW
(12 cm)
r o y u i y Discs such as movies that can be purchased or rented. y Movie mode and finalized only y Supports the dual layer disc also
Finalized AVCHD format y DVD±R/RW discs that contain Movie, Music or
Photo files.
y ISO 9660+JOLIET, UDF and UDF Bridge format
DVD-RW
(VR)
(12 cm)
Audio CD
(12 cm)
r
VR mode and finalized only
Audio CD
CD-R/RW
(12 cm)
Note
Caution
–
– t y u i
,
> y CD-R/RW discs that contain Movie, Music or
Photo files.
y ISO 9660+JOLIET, UDF and UDF Bridge format
Indicates special notes and operating features.
Indicates cautions for preventing possible damages from abuse.
,
Note y Depending on the conditions of the recording equipment or the CD-R/RW (or
DVD±R/RW) disc itself, some CD-R/RW (or
DVD±R/RW) discs cannot be played on the unit.
y Depending on the recording software & the finalization, some recorded discs (CD-R/RW,
DVD±R/RW, BD-R/RE) may not be playable.
y BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a
DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.
y If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.) y This player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. y Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including
CD-R containing MP3 or WMA files) and these require certain pre-existing conditions to ensure compatible playback.
y Customers should note that permission is required in order to download MP3 /
WMA files and music from the Internet.
Our company has no right to grant such permission. Permission should always be sought from the copyright owner.
y You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live System, you cannot use it on LG player. (Mastered/Live File System :
Disc format system for windows Vista)
Getting Started
9
About the “7” Symbol Display
“7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media.
Compatibility Notes
y Because BD-ROM is a new format, certain disc, digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact an authorized
Customer Service Center.
y This unit allows you to enjoy functions such as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-ROM supporting
BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1). Secondary video and audio can be played from a disc compatible with the picture-inpicture function. For the playback method, refer to the instructions in the disc. y Viewing high-definition content and upconverting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input on your display device.
y Some BD-ROM and DVD discs may restrict the use of some operation commands or features.
y Dolby TrueHD, Dolby Digital Plus and DTS-HD are supported with maximum 5.1 channels if you use HDMI connection for the audio output of the unit.
y You can use a USB device to store some disc related information, including downloaded online content. The disc you are using will control how long this information is retained.
1
1
10
Getting Started
File requirement
Movie files
File
Location
Disc,
USB
DLNA
File
Extension
“.avi”, “.divx”,
“.mpg”, “.mpeg”,
“.mkv”, “.mp4”,
“.asf”, “.wmv”,
“.m4v” (DRM free), “.vob”,
“.3gp”
“.avi”, “.divx”,
“.mpg”, “.mpeg”,
“.mkv”, “.mp4”,
“.asf”, “.wmv”,
".m4v (DRM free)
Codec Format Audio Format
DIVX3.xx, DIVX4.xx,
DIVX5.xx, DIVX6.xx
(Standard playback only), XVID, MPEG1 SS,
H.264/MPEG-4 AVC,
MPEG2 PS, MPEG2 TS,
VC-1 SM (WMV3)
Dolby Digital,
DTS, MP3,
WMA, AAC,
AC3
DIVX3.xx, DIVX4.xx,
DIVX5.xx, DIVX6.xx,
(Standard playback only), XVID, MPEG1 SS,
H.264/MPEG-4 AVC,
MPEG2 PS, MPEG2 TS,
VC-1 SM (WMV3)
Dolby Digital,
DTS, MP3,
WMA, AAC,
AC3
Subtitle
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), VobSub
(.sub), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt), TMPlayer
(.txt), DVD Subtitle System (.txt)
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), SubViewer
1.0 (.sub), SubViewer 2.0 (.sub/.
txt), TMPlayer (.txt), DVD Subtitle
System (.txt)
Music files
File
Location
Disc,
USB
DLNA
File
Extension
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free),
“.flac”
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free)
Sampling Frequency
within 32 - 48 kHz
(WMA), within 16 - 48 kHz (MP3) within 32 - 48 kHz
(WMA), within 16 - 48 kHz (MP3)
Bitrate Note
within 32 - 192 kbps (WMA), within
32 - 320 kbps (MP3)
Some wav files are not supported on this player.
within 32 - 192 kbps (WMA), within
32 - 320 kbps (MP3)
Some wav files are not supported on this player.
Photo files
File
Location
Disc,
USB,
DLNA
File
Extension
“.jpg”, “.jpeg”,
“.png”, “.gif”
Recommended
Size
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
Note
Progressive and lossless compression photo image files are not supported.
y Supplied bundle DLNA server for Macintosh edition has limitations in file compatibility, such as ASF, WMA and WMV.
,
Note y The file name is limited to 180 characters. y Maximum files/folder: Less than 2 000
(total number of files and folders) y Depending on the size and number of the files, it may take several minutes to read the contents on the media. y File compatibility may differ depending on the server. y Because the compatibility on DLNA server are tested on the bundle DLNA server
(Nero MediaHome 4 Essentials Windows edition) environment, file requirements and playback functions may differ depending on media servers.
y The file requirements on page 10 are
not always compatible. There may have some restrictions by file features and media server’s ability. y Playing a movie subtitle files are only available on DLNA media server created by supplied Nero MediaHome 4 Essentials software on this player package.
y The files from removable media such as USB drive, DVD-drive etc. on your media server may not be shared properly.
y This unit cannot support the ID3 Tag embedded MP3 file.
y The total playback time of audio file indicated on the screen may not correct for
VBR files.
y HD movie files contained on the CD/DVD or
USB 1.0/1.1 may not played properly.
Blu-ray Disc or USB 2.0 are recommended to play back HD movie files.
y This player supports H.264/MPEG-4 AVC profile Main, High at Level 4.1. For a file with higher level, the warning message will appear on the screen.
y This player does not support files that are recorded with GMC
*
1
or Qpel
*
2
.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
Getting Started
11
,
Note y A “avi” file which is encoded “WMV 9 codec” is not supported.
y This player supports UTF-8 files even it contains Unicode subtitle contents. This player can not support the pure Unicode subtitle files.
y Depending on the types of file or ways of recording, it may not play back.
y A disc which was recorded by multi-session on normal PC is not supported on this player.
y To be playback a movie file, movie file name and Subtitle file name must be the same.
y If video codec is MPEG2 TS or MPEG2 PS, subtitle does not play back.
y The total playback time of music file indicated on the screen may not correct for
VBR files.
AVCHD (Advanced Video
Codec High Definition)
y This player can playback AVCHD format discs.
These discs are normally recorded and used in camcorders.
y The AVCHD format is a high definition digital video camera format.
y The MPEG-4 AVC/H.264 format is capable of compressing images at higher efficiency than that of the conventional image compressing format.
y This player can playback AVCHD discs using
“x.v.Color” format.
y Some AVCHD format discs may not play depending on the recording condition.
y AVCHD format discs need to be finalized.
y “x.v.Color” offers a wider color range than normal
DVD camcorder discs.
1
1
12
Getting Started
About DLNA
This Player is a DLNA Certified digital media player that can display and play movie, photo and music content from your DLNA-compatible digital media server (PC and Consumer Electronics).
The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics, computing industry and mobile device companies.
Digital Living provides consumers with easy sharing of digital media through your home network.
The DLNA certification logo makes it easy to find products that comply with the DLNA
Interoperability Guidelines. This unit complies with
DLNA Interoperability Guidelines v1.5.
When a PC running DLNA server software or other DLNA compatible device is connected to this player, some setting changes of software or other devices may be required. Please refer to the operating instructions for the software or device for more information.
Certain System Requirements
For high definition video playback: y High definition display that has HDMI input jack.
y BD-ROM disc with high definition content.
y HDMI or HDCP capable DVI input on your display device is required for some content (as specified by disc authors).
Regional Code
This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”.
System Select
Press B (OPEN/CLOSE) when a disc is inserted, and do not remove the disc. Press and hold M
(PAUSE) for more than five seconds while [OPEN] is displayed in the display window.
Getting Started
13
Remote control
Battery Installation
Remove the battery cover on the rear of the Remote Control, and insert two R03 (size AAA) batteries with 4 and 5 matched correctly.
• • • • • • a • • • • • •
1 (POWER): Switches the player
ON or OFF.
B (OPEN/CLOSE): Ejects a disc.
FUNCTION: Changes input mode.
0-9 numerical buttons: Selects numbered options in a menu.
CLEAR: Removes a mark on the search menu or a number when setting the password.
REPEAT (h): Repeats a desired section or sequence.
• • • • • • b • • • • • c/v (SCAN): Searches backward or forward.
C/V (SKIP): Goes to the next or previous chapter / track / file.
Z (STOP): Stops playback.
z (PLAY): Starts playback.
M (PAUSE): Pauses playback.
SPEAKER LEVEL: Sets the sound level of desired speaker.
SOUND EFFECT: Selects a sound effect mode.
VOL +/-: Adjusts speaker volume.
OPTICAL: Changes input mode to optical directly.
MUTE: Mute the unit.
• • • • • • c • • • • •
HOME ( ): Displays or exits the
[Home Menu].
3D SOUND: Selects a 3D sound effect mode.
INFO/MENU (m): Displays or exits On-Screen Display.
Direction buttons: Selects an option in the menu.
PRESET +/-: Selects programme of Radio.
TUNING +/-: Tunes in the desired radio station.
ENTER (b): Acknowledges menu selection.
BACK ( ): Exits the menu or resumes playback. The resume play function may not work depending on the BD-ROM disc.
TITLE/POP-UP: Displays the DVD title menu or BD-ROM’s pop-up menu, if available.
DISC MENU: Accesses menu on a disc.
• • • • • • d • • • • •
Colored (R, G, Y, B) buttons:
- Use to navigate BD-ROM menus.
They are also used for [MOVIE],
[PHOTO], [MUSIC], [Premium] and
[LG Apps] menu.
- B button: Selects mono/ stereo in FM mode.
SUBTITLE: Selects a subtitle language.
AUDIO: Selects an audio language or audio channel.
SLEEP: Sets a certain period of time after which the unit will switch to off.
MIC/ECHO (Optional):
Selects the microphone mode or microphone’s echo mode. After selecting the desired mode, press
VOL +/- to adjust microphone volume or microphone’s echo volume.
? : Marked button is not available.
1
1
14
Getting Started
Front panel
a Disc Slot b Display Window c Remote Sensor d MIC 1/2 (Optional) e PORT. IN f USB Port g Operation buttons
R (OPEN/CLOSE)
T (PLAY / PAUSE)
I (STOP)
F (Function)
Changes the input source or function.
VOL. -/+
1 (POWER)
>
Caution
Precautions in using the touch buttons y Use the touch buttons with clean and dry hands.
- In a humid environment, wipe out any moisture on the touch buttons before using.
y Do not press the touch buttons hard to make it work.
- If you apply too much strength, it can damage the sensor of the touch buttons.
y Touch the button that you want to work in order to operate the function correctly.
y Be careful not to have any conductive material such as metallic object on the touch buttons. It can cause malfunctions.
Rear panel
a AC power cord b Speakers connectors c Cooling Fan d OPTICAL IN e Antenna Connector f AUX (L/R) INPUT g LAN port h HDMI IN 1/2 i HDMI OUT TO TV j VIDEO OUT
Getting Started
15
1
D
A
B
A
F
D
C
16
A
A
A
Positioning the system
E
A
The following illustration shows an example of
A positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes.
For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (
A
).
A B C D E F G
2
A
A
A
F
A
F
A
A
F
F
A
B
B
C
C
G
G
A
B
A
A
A
F
C
G
B
A
A
A
C
A
A
F
A
A
E
E
G
B
C
B
A
A
A
E
F
D
A
A
F
D
A
D
A
C
G
A
A
A
A
A
D
C
A
A
A
D
G
A
G
A
B
A
A
A
A
A
A
A
A
A
A A
A B
B C
C D
A
D
E
A
A
B
Front left speaker (L)/
E F G
A
Front right speaker (R):
A B C D E F G
Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible.
C
E
D F G
Place the center speaker above or below the monitor or screen.
D
Surround left speaker (L)/
E
Surround right speaker (R):
A
A
A B C D
A
A B C D
E
E
F facing slightly inwards.
F
Subwoofer:
The position of the subwoofer is not so critical, because low bass sounds are not highly directional.
But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce the wall reflections.
G
Unit
>
Caution y Be careful to make sure children not to put their hands or any objects into the *speaker duct.
*Speaker duct: A hole for plentiful bass sound on speaker cabinet (enclosure).
y Place the center speaker at a safe distance from the child’s reach.
Otherwise it may result in the speaker falling down and causing personal injury and/or property damage.
y The speakers contain magnetic parts, so colour irregularity may occur on the CRT
TV screen or PC monitor screen. Please use the speakers away from the TV screen or PC monitor screen.
y Before using the subwoofer, remove the protective vinyl.
Speaker Connection
Attaching the speakers to the player
1. Connect speaker wires to the player.
Each speaker wire is color-coded. Use matching color wires for corresponding speakers.
Color
Grey
Blue
Green
Speaker Position
Rear Rear right
Rear
Center
Rear left
Center
Orange
Red
Sub woofer
Front
Any front position
Front right
White Front Front left
2. Connect the speaker wire to the terminal on the speaker.
Make sure the wire marked black goes in to the terminal marked “–” (minus) and the other wire goes in to the terminal marked “+” (plus).
Connecting
17
2
2
18
Connecting
Connecting to Your TV
Make one of the following connections, depending on the capabilities of your existing equipment.
,
Note y Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player.
Use only one of the connections described in this manual.
y Please refer to the manuals of your TV, stereo system or other devices as necessary to make the best connections.
y Make sure the player is connected directly to the TV. Tune the TV to the correct video input channel.
y Do not connect your player via your VCR.
The image could be distorted by the copy protection system.
HDMI Connection
If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High speed HDMI™ cable with Ethernet). Connect the
HDMI jack on the player to the HDMI jack on a
HDMI compatible TV or monitor.
Rear of the unit
TV
HDMI cable
Set the TV’s source to HDMI (refer to TV’s Owner’s manual).
Additional Information for HDMI
y When you connect a HDMI or DVI compatible device make sure of the following:
- Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
y Not all HDCP-compatible HDMI or DVI devices will work with this player.
- The picture will not be displayed properly with non-HDCP device.
,
Note y If a connected HDMI device does not accept the audio output of the player, the HDMI device’s audio sound may be distorted or may not output.
y When you use HDMI connection, you can change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 20.)
y Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Setup] menu (see page
y Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again.
y When the HDMI connection with HDCP is not verified, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable.
y If there are noises or lines on the screen, please check the HDMI cable (length is generally limited to 4.5 m(15 ft.)).
What is SIMPLINK?
Connecting
19
ARC (Audio Return Channel) function
The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of this player.
To use this function:
- Your TV must support the HDMI-CEC and ARC function and the HDMI-CEC and ARC must be set to On.
- The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about
ARC function, refer to your TV manual.
- You must use the HDMI cable (Type A, High
Speed HDMI™ cable with Ethernet).
- You must connect with the HDMI IN that supports the ARC function using the HDMI OUT on this player.
- You can connect only one Home Theater to TV compatible with ARC.
2
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off, etc.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as shown above.
,
Note
Depending on the disc type or playing status, some SIMPLINK operation may differ from your purpose or not work.
2
20
Connecting
Video Connection
Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers.
Rear of the unit
Resolution Setting
The player provides several output resolutions for
HDMI OUT jack. You can change the resolution using [Setup] menu.
1. Press HOME ( ).
2. Use A/D to select the [Setup] and press ENTER
(b). The [Setup] menu appears.
3. Use W/S to select [DISPLAY] option then press D to move to the second level.
4. Use W/S to select the [Resolution] option then press ENTER (b) to move to the third level.
Video cable
TV
5. Use W/S to select the desired resolution then press ENTER (b) to confirm your selection.
,
Note y If your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows:
1. Press HOME ( ) to disappear the HOME menu.
y When you set the resolution to 576i with
HDMI connection, actual resolution is outputted to 576p.
y If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].
y If you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution.
y The 1080p video output frame rate may be automatically set to either 24 Hz or
60 Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc.
y The resolution of the VIDEO OUT jack is always outputted at 576i resolution.
Connecting
21
Antenna connection
Connect the supplied antenna for listening to the radio.
Rear of the unit
,
Note
After connecting the FM wire antenna, keep it as horizontal as possible. Be sure to fully extend the FM wire antenna.
2
2
22
Connecting
Connections with external device
AUX Connection
You can enjoy the sound from an external component through the speakers of this system.
Connect the analog audio output jacks of your component into the AUX L/R (INPUT) on this unit.
And then select the [AUX] option by pressing
FUNCTION and ENTER (b).
You can also use the F (Function) button on the front panel to select the input mode.
PORT. IN connection
You can enjoy the sound from your portable audio player through the speakers of this system.
Connect the headphones (or line out ) jack of the portable audio player into the PORT. IN socket of this unit. And then select the [PORTABLE] option by pressing FUNCTION and ENTER (b).
You can also use the F (Function) button on the front panel to select the input mode.
Rear of the unit
MP3 player, etc...
Red
White
To the audio output jacks of your component
(TV, VCR, etc.)
Connecting
23
OPTICAL IN connection
You can enjoy the sound from your component with a digital optical connection through the speakers of this system.
Connect the optical output jack of your component into the OPTICAL IN jack on the unit. And then select the [OPTICAL] option by pressing FUNCTION and ENTER (b). Or press OPTICAL to select directly.
You can also use the F (Function) button on the front panel to select the input mode.
HDMI IN 1/2 connection
You can enjoy the pictures and sound from your component through this connection.
Connect the HDMI OUT jack of your component into the HDMI IN 1 or 2 jack on this unit. And then select the [HDMI IN 1/2] option by pressing
FUNCTION and ENTER (b).
You can also use the F (Function) button on the front panel to select the input mode.
Rear of the unit
Rear of the unit
2
To the digital optical output jack of your component
To the HDMI
OUT jack of your component
(set-top box, digital satellite receiver, video game machine, etc.)
,
Note y You cannot change the video resolution in the HDMI IN 1/2 mode. Change the video resolution of the connected component.
y If the video output signal is abnormal when your personal computer is connected to
HDMI IN 1/2 jack, change the resolution of your personal computer to 576p, 720p,
1080i or 1080p.
y The video signal from the HDMI input cannot be output from the component or composite video outputs.
y The player sends audio from the HDMI inputs to both the HDMI output and to the unit’s speakers.
2
24
Connecting
Connecting to your
Home Network
This player can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal wireless module.
By connecting the unit to a broadband home network, you have access to services such as software updates, BD-LIVE interactivity and on-line content services.
Wired network connection
Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference.
Please refer to the documentation for your network device for further instructions.
Connect the player’s LAN port to the corresponding port on your Modem or Router using a commercially available LAN or Ethernet cable.
,
Note y When plugging or unplugging the LAN cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock.
y Do not connect a modular phone cable to the LAN port.
y Since there are various connection configurations, please follow the specifications of your telecommunication carrier or internet service provider.
y If you want to access content from DLNA servers, this player must be connected to the same local area network with them via a router.
y To set your PC as a DLNA server, install the supplied Nero MediaHome 4 on your PC.
Broadband service
Router
DLNA certified servers
Rear of the unit
Connecting
25
Wired Network Setup
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow.
Preparation
Before setting the wired network, you need to connect the broadband internet to your home network.
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER (b).
Advanced Setting
If you want to set the network settings manually, use W/S to select [Advanced Setting] on the
[Network Setting] menu and press ENTER (b).
1. Use W/S to select [Wired] and press ENTER
(b).
2. Use W/S/A/D to select the IP mode between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP address automatically.
2
2. Read the preparations for the network settings and then press ENTER (b) while [Start] is highlighted.
,
Note
If there is no DHCP server on the network and you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using
W/S/A/D and numerical buttons. If you make a mistake while entering a number, press
CLEAR to clear the highlighted part.
Network will automatically be connected to the unit.
3. Select [Next] and press ENTER (b) to apply network settings.
Network connection status is displayed on the screen.
4. Press ENTER (b) while [Close] is highlighted to finish the wired network settings.
2
26
Connecting
Wireless Network Connection
Another connection option is to use an Access Point or a wireless router. The network configuration and connection method may vary depending on the equipment in use and the network environment.
Wireless
Communication
DLNA certified servers
Access Point or
Wireless Router
Wireless Network Setup
For the wireless network connection, the player needs to be set up for network communication.
This adjustment can be done from the [Setup] menu. Adjust the [NETWORK] setting as follow.
Setting up the access point or the wireless router is required before connecting the player to the network.
Preparation
Before setting the wireless network, you need to:
- connect the broadband internet to the wireless home network.
- set the access point or wireless router.
- note the SSID and security code of the network.
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER (b).
2. Read the preparations for the network settings and then press ENTER (b) while [Start] is highlighted.
Broadband service
Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings.
For best performance, a direct wired connection from this player to your home network’s router or cable/DSL modem is always the best option.
If you do chose to use the wireless option, note that performance can sometimes be affected by other electronic devices in the home.
If wired network is not connected to the unit, all available networks are displayed on the screen.
3. Use W/S to select a desired SSID of wireless network and press ENTER (b).
If you have security on your access point, you need to input the security code as necessary.
Connecting
27
Advanced Setting
If you want to set the network settings manually, use W/S to select [Advanced Setting] on the
[Network Setting] menu and press ENTER (b).
1. Use W/S to select [Wireless] and press ENTER
(b).
,
Note y WEP security mode generally have 4 keys available on an access point setting. If your access point or wireless router use WEP security, enter the security code of the key
“No.1” to connect on your home network.
y An Access Point is a device that allows you to connect to your home network wirelessly.
4. Use W/S/A/D to select the IP mode between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP address automatically.
,
Note
If there is no DHCP server on the network and you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using
W/S/A/D and numerical buttons. If you make a mistake while entering a number, press
CLEAR to clear the highlighted part.
5. Select [Next] and press ENTER (b) to apply network settings.
Network connection status is displayed on the screen.
6. Select [Close] and press ENTER (b) to complete the network connection.
[AP List] - Scans all available access points or wireless routers within range and display them as a list.
[Network name (SSID)] – Your access point may not be broadcasting its network name
(SSID). Check your access point settings through your computer and either set your access point to broadcast SSID, or manually enter the network name in [Network name(SSID)].
[PBC] – If your access point or wireless router that supports the PBC (Push Button
Configuration) method, select this option and press the Push Button on your access point within 120 counts. You do not need to know the network name (SSID) and security code of your access point.
[PIN] – If your access point supports the PIN
Code configuration method based on WPS(Wi-
Fi Protected Setup), select this option and note the code number on the screen. And then, enter the PIN number on a setting menu of your access point to connect. Refer to the documentation for your network device.
2. Follow the instructions of each connection method on the screen.
,
Note
To use PBC and PIN network connection, security mode of your access point must be set to OPEN or AES.
2
2
28
Connecting
Notes on Network Connection:
y Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/ or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.
y Depending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.
y Our company is not responsible for any malfunction of the player and/or the internet connection feature due to communication errors/malfunctions associated with your broadband internet connection, or other connected equipment.
y The features of BD-ROM discs made available through the Internet Connection feature are not created or provided by our company, and our company is not responsible for their functionality or continued availability. Some disc related material available by the Internet Connection may not be compatible with this player. If you have questions about such content, please contact the producer of the disc.
y Some internet contents may require a higher bandwidth connection.
y Even if the player is properly connected and configured, some internet contents may not operate properly because of internet congestion, the quality or bandwidth of your internet service, or problems at the provider of the content.
y Some internet connection operations may not be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your broadband Internet connection.
y Any fees charged by an ISP including, without limitation, connection charges are your responsibility.
y A 10 Base-T or 100 Base-TX LAN port is required for wired connection to this player. If your internet service does not allow for such a connection, you will not be able to connect the player.
y You must use a Router to use xDSL service.
y A DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or you may be limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this player may not be allowed to connect when a PC is already connected.) y The use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.
y The wireless network operate at 2.4GHz radio frequencies that are also used by other household devices such as cordless telephone,
Bluetooth® devices, microwave oven, and can be affected by interference from them.
y Turn off all unused network equipment in your local home network. Some devices may generate network traffic.
y For the purpose of the better transmission, placing the player from the access point as close as possible.
y In some instances, placing the access point or wireless router at least 0.45 m (1.5 ft.) above the floor may improve the reception.
y Move closer to the access point if possible or reorient the player so there is nothing between it and the access point.
y The reception quality over wireless depends on many factors such as type of the access point, distance between the player and access point, and the location of the player.
y Set your access point or wireless router to
Infrastructure mode. Ad-hoc mode is not supported.
USB device connection
This player can play movie, music and photo files contained in the USB device.
Playback content in the USB device
1. Insert a USB device to the USB port until it fits into place.
When you connect the USB device on the HOME menu, the player plays a music file contained in the
USB storage device automatically. If the USB storage device is containing various types of files, a menu for the file type selection will appear.
File loading may takes few minutes depending on the number of content stored in the USB storage device. Press ENTER (b) while [Cancel] is selected to stop loading.
2. Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b).
4. Select the [USB] option using W/S, and press
ENTER (b).
Connecting
29
,
Note y This player supports USB flash drive/external
HDD formatted in FAT16, FAT32 and NTFS when accessing files (music, photo, movie).
However, for BD-Live, only FAT16 and FAT32 formats are supported. Use the USB flash drive/external HDD formatted in either
FAT16 or FAT32 when using BD-Live.
y The USB device can be used for the local storage for enjoying BD-LIVE discs with
Internet.
y This unit can support up to 4 partitions of the USB device.
y Do not extract the USB device during operation (play, etc.). y A USB device which requires additional program installation when you have connected it to a computer, is not supported.
y USB device: USB device that supports
USB1.1 and USB2.0.
y Movie, music and photo files can be played.
For details of operations on each file, refer to relevant pages.
y Regular back up is recommended to prevent data loss.
y If you use a USB extension cable, USB HUB or USB Multi-reader, the USB device may not be recognized.
y Some USB device may not work with this unit.
y Digital camera and mobile phone are not supported.
y USB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device.
2
5. Select a file using W/S/A/D, and press
PLAY or ENTER (b) to play the file.
6. Withdraw the USB device carefully.
3 System Setting
3
30
System Setting
Settings
Initial Setup
When you turn on the unit for the first time, the initial setup wizard appears on the screen. Set the display language, network settings and speaker setup on the initial setup wizard.
1. Press 1 (POWER).
The initial setup wizard appears on the screen.
2. Use W/S/A/D to select a display language and press ENTER (b).
5. Use W/S/A/D to select the IP mode between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP address automatically.
6. Select [Next] and press ENTER (b) to apply network settings.
3. Read and prepare the preparations for the network settings and then press ENTER (b) while [Start] is highlighted.
Network connection status is displayed on the screen.
For details on network settings, refer to
"Connecting to your Home Network" on page
24.
7. Select [Next] and press ENTER (b).
8. Press ENTER (b) to verify the test tone signals of the speakers.
If wired network is connected , the network connection setting will automatically be finished.
4. All available networks are displayed on the screen. Use W/S to select [Wired Network] or desired SSID of wireless network and press
ENTER (b).
After verifying the test tone signals, press ENTER
(b) while [Stop] is highlighted.
Select [Next] and press ENTER (b).
If you have security on your access point, you need to input the security code as necessary.
9. Check all the settings that you have set in the previous steps.
System Setting
31
Adjust the Setup Settings
You can change the settings of the player in the
[Setup] menu.
1. Press HOME ( ).
Press ENTER (b) while [Finish] is highlighted to finish the initial setup settings. If there is any settings to be changed, use A/D to select
[Previous] and press ENTER (b).
2. Use A/D to select the [Setup] and press
ENTER (b). The [Setup] menu appears.
3
3. Use W/S to select the first setup option, and press D to move to the second level.
4. Use W/S to select a second setup option, and press ENTER (b) to move to the third level.
5. Use W/S to select a desired setting, and press
ENTER (b) to confirm your selection.
3
32
System Setting
[DISPLAY] Menu
TV Aspect Ratio
Select a TV aspect ratio option according to your TV type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars above and below the picture.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
[16:9 Original]
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen.
,
Note
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is set to higher than 720p.
Resolution
Sets the output resolution of the HDMI video signal.
Refer to page 20 for details about the resolution
setting.
[Auto]
If the HDMI OUT jack is connected to
TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV.
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[576p]
Outputs 576 lines of progressive video.
[576i]
Outputs 576 lines of interlaced video.
1080p Display Mode
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display compatible with 1080p/24 Hz input.
,
Note y When you select [24 Hz], you may experience some picture disturbance when the video switches video and film material.
In this case, select [50 Hz].
y Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of the video output will be 50 Hz to match the video source format.
HDMI Color Setting
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your display device.
[YCbCr]
Select when connecting to a HDMI display device.
[RGB]
Select when connecting to a DVI display device.
3D Mode
Select the type of output mode for Blu-ray 3D disc playback.
[Off]
Blu-ray 3D disc playback will output as 2D mode like a normal BD-ROM disc playback.
[On]
Blu-ray 3D disc playback will output as 3D mode.
Wallpaper
Changes the background of the initial screen.
Home Menu Guide
This function allows you to display or delete the guide bubble on the Home Menu. Set this option to [On] for displaying guide.
System Setting
33
[LANGUAGE] Menu
Display Menu
Select a language for the [Setup] menu and onscreen display.
Disc Menu/Disc Audio/
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the disc was recorded.
[Other]
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b) to enter the corresponding 4-digit number
according to the language code list on page
[Off] (Disc Subtitle only)
Turn off Subtitle.
,
Note
Depending on the disc, your language setting may not work.
3
3
34
System Setting
[AUDIO] Menu
Each disc has a variety of audio output options. Set the player’s Audio options according to the type of audio system you use.
,
Note
Since many factors affect the type of audio output, see “Audio Output Specifications” on
Digital Output
[PCM Stereo] (HDMI only)
Select if you connect this unit’s HDMI OUT jack to a device with two-channel digital stereo decoder.
[PCM Multi-Ch] (HDMI only)
Select if you connect this unit’s HDMI OUT jack to a device with multi-channel digital decoder.
[DTS Re-Encode] (HDMI only)
Select if you connect this unit’s HDMI OUT jack to a device with DTS decoder.
[BitStream] (HDMI only)
Select if you connect this unit’s HDMI OUT jack to a device with LPCM, Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS and DTS-HD decoder.
,
Note y When [Digital Output] option is set to [PCM
Multi-Ch], the audio may output as PCM
Stereo if the PCM Multi-Ch information is not detected from HDMI device with EDID.
y If the [Digital Output] option is set to [DTS
Re-Encode], the DTS Re-Encode audio is outputted for BD-ROM discs with secondary audio and the original audio is outputted for the other discs (like [BitStream]).
y This setting is not available on the input signal from an external device.
Speaker Setup
To obtain the best possible sound, use the speaker setup display to specify the volume of the speakers you have connected and their distance from your listening position. Use the test to adjust the volume of the speakers to the same level.
[Speaker]
Select a speaker that you want to adjust.
[Volume]
Adjust the output level of each speaker.
[Distance]
Adjust the distance between each speaker and the listening position.
[Test/ Stop test tone]
The speakers will emit a test tone.
[OK]
Confirms the setting.
[Cancel]
Cancels the setting.
HD AV Sync
Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use W S to scroll up and down through the delay amount, which you can set at anything between 0 and 300 ms.
System Setting
35
Semi Karaoke
When a chapter/ title is fully finished, this function shows the score on the screen with a fanfare sound.
[On]
When you finished singing a score will appear on the screen.
[Off]
Fanfare and score do not appears on the screen.
,
Note y When you watch movies, “Off ” the Semi
Karaoke at the Setup menu or enjoy it without connecting the microphone if the fanfare or score appears during changing a chapter.
y The Semi Karaoke function is available only when a microphone is connected. y The fanfare and score is applied for only BD-
ROM and DVD-title playback.
DRC (Dynamic Range Control)
This function allows you to listen to a movie at a lower volume without losing clarity of sound.
[Off]
Turns off this function.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD audio output.
[Auto]
The dynamic range of the Dolby TrueHD audio output is specified by itself.
And the dynamic range of the Dolby Digital and Dolby Digital Plus are operated as same as the [On] mode.
,
Note
The DRC setting can be changed only when a disc is not inserted or the unit is in complete stop mode.
3
3
36
System Setting
[LOCK] Menu
The [LOCK] settings affect only BD-ROM and DVD playback.
To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created.
If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password twice, and press ENTER (b) to create a new password.
Password
You can create or change the password.
[None]
Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
[Change]
Enter the current password and press ENTER
(b). Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
If you forget your password
If you forget your password, you can clear it using the following steps:
1. Remove any disc that might be in the player.
2. Select [Password] option in the [Setup] menu.
3. Use Number buttons to enter “210499”. The password is cleared.
,
Note
If you make a mistake before pressing ENTER
(b), press CLEAR. Then input the correct password.
DVD Rating
Blocks playback of rated DVD based on their content. (Not all discs are rated.)
[Rating 1-8]
Rating one (1) has the most restrictions and rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not active and the disc plays in full.
Blu-ray Disc Rating
Set an age limit of BD-ROM play. Use number buttons to input an age limit for BD-ROM viewing.
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with corresponding ratings recorded on them.
,
Note
The [Blu-ray Disc Rating] will be applied only for the BD disc that containing the Advanced
Rating Control.
Area Code
Enter the code of the area whose standards were used to rate the DVD video disc, based on the list
[NETWORK] Menu
The [NETWORK] settings are needed to use the software update, BD Live and on-line content services.
Connection Setting
If your home network environment is ready to connect the player, the player needs to be set the wired or wireless network connection for network communication. (See “Connecting to your Home
Network” on page 24-28.)
Connection Status
If you want to check the network status on this player, select the [Connection Status] options and press ENTER (b) to check whether a connection to the network and the internet have been established.
BD-LIVE connection
You can restrict Internet access when BD-LIVE functions are used.
[Permitted]
Internet access is permitted for all BD-LIVE contents.
[Partially permitted]
Internet access is permitted only for BD-
LIVE contents which have content owner certificates. Internet access and AACS Online functions are prohibited for all BD-LIVE contents without a certificate.
[Prohibited]
Internet access is prohibited for all BD-LIVE contents.
System Setting
37
Premium/LG Apps
[Country Setting]
Select your area for displaying proper services and contents on the [Premium] and [LG Apps] feature.
Device Name
You can make a network name using virtual keyboard. This player will be recognised by the name you are entering on your home network.
Wi-Fi Direct
This player is a Wi-Fi Direct™ certified device. Wi-Fi
Direct™ is the technology that devices to connect each other without connecting to an Access point or a router. Set this option to [On] for activating
the Wi-Fi Direct™ mode. Refer to page 42 for the
device connection.
[OTHERS] Menu
DivX VOD
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the deactivation code.
,
Note
All the downloaded videos from DivX(R) VOD with this player’s registration code can only be played on this unit.
3
3
38
System Setting
Network Play
This function allows you to control the playback of media streamed from DLNA media server by a
DLNA certified smartphone. Most DLNA certified smartphone has a function to control the playback media on your home network. Set this option to
[On] for allowing your smartphone to control this unit. Refer to instructions of your DLNA certified smartphone or the application for more detailed information.
,
Note y This unit and the DLNA Certified Smartphone must be connected to the same network.
y To use the [Network Play] function using a
DLNA certified smartphone, press HOME
( ) to display the home menu before connecting to this unit.
y While controlling the unit using the [Network
Play] function, the remote control may not work.
y Available file formats described on page
10 are not always supported on [Network
Play] function.
Auto Power Off
The screen saver appears when you leave the player in Stop mode for about five minutes. If you set this option to [On], the unit automatically turns off within 20 minutes since the Screen Saver is displayed. Set this option to [Off ] to leave the screen saver until the unit is operated by the user.
,
Note
Depending on the function, this function may not be available.
Initialize
[Factory Set]
You can reset the player to its original factory settings.
[Blu-ray Storage Clear]
Initializes the BD-Live contents from the connected USB storage.
,
Note
If you reset the player to its original factory settings using [Factory Set] option, you have to set all the activation for the on-line services and network settings again.
Software
[Information]
Displays the current software version.
[Update]
You can update the software by connecting the unit directly to the software update server
(see page 59-60).
Disclaimer Notice
Press ENTER (b) to view the notice of Network
Service Disclaimer.
System Setting
39
Sound Effect
You can select a suitable sound mode. Press SOUND
EFFECT repeatedly until the desired mode appears on the front panel display or the TV screen. The displayed items for the equalizer maybe different depending on sound sources and effects.
[Natural Plus]: You can enjoy the natural sound effect same as 5.1 channel.
[Natural]: You can enjoy comfortable and natural sound.
[Bypass]: Software with multichannel surround audio signals is played according to the way it was recorded.
[Bass Blast]: Reinforce the bass sound effect from front left and right speaker and subwoofer.
[Clear Voice]: This mode makes voice sound clear, improving the quality of voice sound.
[Game]: You can enjoy more virtual sound while playing video games.
[Night]: This may be useful when you want to watch movies at low volumes late at night.
[Up Scaler]: When listening to MP3 files or other compressed music, you can enhance the sound.
This mode is available only to 2 channel sources.
[Loudness]: Improves bass and treble sound.
[User EQ]: You can adjust the sound by raising or lowering the level of specific frequency.
Setting the [User EQ]
1. Use W/S to select the desired frequency.
2. Use A/D to select the desired level.
Select [Cancel] option then press ENTER (b) to cancel the setting.
Select [Reset] option then press ENTER (b) to reset the all adjustments.
3D Sound Effect
3D Sound features create a wider spot so you can enjoy more immersive and cinematic surround sound. Press 3D SOUND repeatedly until the desired mode appears on the front panel display or the TV screen.
[3D Music]: This mode delivers outstanding surround sound, providing a concert hall-like music experience in your home.
[3D Movie]: This mode delivers outstanding surround sound, providing a theater-like movie experience in your home.
3
4 Operating
4
40
Operating
General Playback
Using [HOME] menu
The home menu appears when you press HOME
( ). Use W/S/A/D to select a category and press ENTER (b).
k
,
Note
Depending on the region, [LG Apps] service and [Search] function may not be available at the moment. The service may become available in these regions through at software update later.
a [Music] - Plays audio contents. b [Movie] - Plays video contents. c [Photo] - Plays photo contents.
d
[Premium] - Displays the Premium Home screen.
e [LG Apps] - Displays the [LG Apps] screen.
f [Input] - Changes input mode.
g [Setup] - Adjusts the system settings.
h
[Search] - Searching an on-line content by inputting a keyword on the search menu. i [LG Apps] - Displays the [LG Apps] screen.
j
[Favorite Apps] - Shortcut for user’s favorite
Apps.
k [My Apps] - Displays the My Apps screen.
Playing a Disc
erot
1. Insert a disc in the disc slot.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts automatically.
2. Press HOME ( ).
3. Select [Movie] or [Music] using A/D, and press
ENTER (b).
4. Select [Blu-ray Disc], [DVD], [VR] or [Audio] option using W/S, and press ENTER (b).
,
Note y Playback functions described in this manual are not always available in every files and media. Some functions can be restricted depending on many factors.
y Depending on the BD-ROM titles, a USB device connection may be needed for the proper playback.
y Unfinalized DVD VR format discs may not be played in this player.
y Some DVD-VR discs are made with CPRM data by DVD RECORDER. This unit cannot support these kinds of discs.
Playing a file on a disc/USB device
yui
This player can play movie, music and photo files contained in the disc or USB device.
1. Insert a data disc in the disc slot or connect a
USB device.
2. Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b).
4. Select [Data] or [USB] option using W/S, and press ENTER (b).
5. Select a file using W/S/A/D, and press d(PLAY) or ENTER (b) to play the file.
Operating
41
Playing Blu-ray 3D disc
e
This player can play the Blu-ray 3D discs which contains separate views for the left and right eyes.
Preparation
In order to playback Blu-ray 3D title in stereoscopic 3D mode, you need to: y
Check your TV is 3D capable and has HDMI input(s).
y Wear 3D glasses to enjoy the 3D experience if it is necessary.
y Check whether the BD-ROM title is the Bluray 3D disc or not.
y Connect an HDMI cable (High Speed HDMI™
Cable with Ethernet) between the player’s
HDMI output and TV’s HDMI input.
1. Press HOME ( ), and set the [3D Mode] option
on the [Setup] menu to [On] (page 33).
2. Insert a disc in the disc slot.
The playback starts automatically.
3. Refer to the owner’s manual of your 3D-ready
TV for the further instruction.
You may need to adjust the display settings and focus on your TV’s setting for the improved 3D effect.
>
Caution y Watching a 3D content for a long period time may cause dizziness or tiredness.
y It is not recommended to watch a movie in 3D mode for infirm, child and pregnant woman.
y If you are experiencing headache, tiredness or dizziness while viewing contents in 3D, it is strongly recommended to stop the playback and rest until you feel normal.
Enjoying BD-Live™
e
BD-ROM supporting BD-Live that has a network extension function allows you to enjoy more functions such as downloading new movie trailers by connecting this unit to the internet.
1. Check the network connection and settings
(pages 24-28).
2. Insert a USB storage device to the USB port on the front panel.
A USB storage device is needed to download bonus content.
3. Press HOME ( ), and set the [BD-LIVE
connection] option on the [Setup] menu (page
Depending on a disc, the BD-Live function may not be operated if [BD-LIVE connection] option is set to [Partially Permitted].
4. Insert a BD-ROM with BD-Live.
The operations are differ depending on the disc.
Refer to the manual supplied with the disc.
>
Caution
Do not extract the connected USB device while content is being downloaded or a Bluray disc is still in the disc slot. Doing so may damage the connected USB device and BD-
Live features may not operate properly with the damaged USB device anymore. If the connected USB device seems damaged from such an action, you can format the connected
USB device from the PC and reuse it with this player.
,
Note y Some BD-Live contents may be restrictively accessed in some territories by contents provider’s own decision.
y It may take up to several minutes to load and start enjoying BD-Live contents.
4
4
42
Operating
Playing a file on a network server
yui
This player can play video, audio and photo files located in a DLNA server through your home network.
1. Check the network connection and settings
(pages 24-28).
2. Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b).
4. Select a DLNA media server on the list using
W/S, and press ENTER (b).
Wi-Fi Direct™ Connection
Connecting to a Wi-Fi Direct™ certified device
yui
This player can play movie, music and photo files located in a Wi-Fi Direct™ certified device. The Wi-Fi
Direct™ technology make the player to be directely connected to a Wi-Fi Direct™ certified device without connecting to a network device such as an access point.
1. Set the [Wi-Fi Direct] option on the [Setup]
2. Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b).
4. Select [Wi-Fi Direct] option using W/S, and press ENTER (b).
If you want to rescan available media server, press the green (G) colored button.
5. Select a file using W/S/A/D, and press
ENTER (b) to play the file.
,
Note
y The file requirements are described on page
y The thumbnail of the unplayable files can be displayed, but those cannot be played on this player.
y The subtitle file name and movie file name have to be the same and located at the same folder.
y The playback and operating quality may be affected by your home network condition.
y You may experience connection problems depending on your server’s environment.
y To set your PC as a DLNA server, install the supplied Nero MediaHome 4 on your PC.
5. Select a Wi-Fi Direct™ device on the list using
W/S, and press ENTER (b).
Wi-Fi Direct™ connection will be automatically proceeded.
If the Wi-Fi Direct™ device supports the PIN
Code configuration method based on WPS(Wi-
Fi Protected Setup), select a device on the list and press yellow (Y) coloured button. Note the
PIN number on the screen. And then, enter the
PIN number on a setting menu of the device to connect.
If you want to rescan available Wi-Fi Direct™ device, press the green (G) coloured button.
,
Note
When you connect this unit from other Wi-Fi
Direct™ devices, PIN connection method is not available.
6. Select a server that shared from the connected
Wi-Fi Direct™ device using W/S, and press
ENTER (b) to navigate the server.
Operating
43
Connecting to a Wi-Fi available devices
yui
This player can connect to a general Wi-Fi device using Wi-Fi Direct™ function.
1. Set the [Wi-Fi Direct] option on the [Setup]
2. Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b).
4. Select [Wi-Fi Direct] option using W/S, and press ENTER (b).
To select a server from the device list, files or folders must be shared by DLNA server from the connected Wi-Fi Direct™ device.
7. Select a file using W/S/A/D, and press
ENTER (b) to play the file.
,
Note y For the purpose of the better transmission, placing the player from the Wi-Fi Direct™ certified server as close as possible.
y This unit can connect only 1 device at a time. Multiple connection is not available. y If you try to connect wireless network while a device is connected by Wi-Fi Direct™ function , Wi-Fi Direct™ connection will be force disconnected.
y If this player and a Wi-Fi Direct™ device are connected to the different local area network, Wi-Fi Direct™ connection may not available.
y If a Wi-Fi Direct™ certified device is not in
Wi-Fi direct standby mode, this product can’t find the device.
y This product cannot connect to a
Wi-Fi direct™ device which is in Group
Owner mode.
5. Press red (R) coloured button to display the
[SSID], [Security Option] and [Encription] of the player.
6. On your Wi-Fi device, make a network connection to this player, using [Network name
(SSID)], [Security Option] and [Encription] at step 5 above.
7. Press BACK ( ) twice to display the device list.
4
4
44
Operating
8. Select a server that shared from the connected
Wi-Fi device using W/S, and press ENTER (b) to navigate the server.
To select a server from the device list, files or folders must be shared by DLNA server from the connected device.
9. Select a file using W/S/A/D, and press
ENTER (b) to play the file.
,
Note
In case of connection to a Wi-Fi equipped device, PIN connection does not work.
Basic operations for video and audio content
To stop playback
Press Z (STOP) while playback.
To pause playback
Press M (PAUSE) while playback.
Press d (PLAY) to resume playback.
To play frame-by-frame (Video)
Press M (PAUSE) while movie playback.
Press M (PAUSE) repeatedly to play Frame-by-Frame playback.
To scan forward or backward
Press c or v to play fast forward or fast reverse during playback.
You can change the various playback speeds by pressing c or v repeatedly.
To slow down the playing speed
While the playback is paused, press v repeatedly to play various speeds of slow motion.
To skip to the next/previous chapter/track/file
During playback, press C or V to go to the next chapter/track/file or to return to the beginning of the current chapter/track/file.
Press C twice briefly to step back to the previous chapter/track/file.
In the file list menu of a server, there may have many types of contents in a folder together. In this case, press C or V to go to the previous or next content with same type.
Operating
45
Basic operations for photo content
To play a slide show
Press d (PLAY) to start slide show.
To stop a slide show
Press Z (STOP) while slide show.
To pause a slide show
Press M (PAUSE) while slide show.
Press d (PLAY) to re-start the slide show.
To skip to the next/previous photo
While viewing a photo in full screen, press A or D to go to the previous or next photo.
Using the disc menu
ero
To display the disc menu
The menu screen may be displayed first after loading a disc which contains a menu. If you want to display the disc menu while playback, press DISC
MENU.
Use W/S/A/D buttons to navigate through menu items.
To display the Pop-up menu
Some BD-ROM discs contain Pop-up menu that appears while playback.
Press TITLE/POPUP while playback, and use W/S/
A/D buttons to navigate through menu items.
Resume playback
eroyt u
The unit records the point where you pressed the
Z (STOP) depending on the disc.
If “MZ (Resume Stop)” appears on the screen briefly, press d (PLAY) to resume playback (from the scene point).
If you press Z (STOP) twice or unload the disc,
“Z(Complete Stop)” appears on the screen. The unit will clear the stopped point.
,
Note y The resume point may be cleared when a button is pressed (for example; 1 (POWER),
B (OPEN/CLOSE), etc).
y On BD-ROM discs with BD-J, the resume playback function does not work.
y If you press Z (STOP) once during BD-ROM interactive title playback, the unit will be in
Complete Stop mode .
Last Scene Memory
er
This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the unit or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled.
,
Note y Last Scene Memory function for a previous disc is erased once a different disc is played.
y This function may not work depending on the disc. y On BD-ROM discs with BD-J, the last scene memory function does not work.
y This unit does not memorize settings of a disc if you switch off the unit before commencing to play it.
4
4
46
Operating
Advanced Playback
Repeat Playback
erotu y
During playback, press REPEAT (h) repeatedly to select a desired repeat mode.
Blu-ray Disc / DVD / Movie files
jA- – Selected portion will be repeated continually.
jChapter – The current chapter will be played back repeatedly.
jTitle – The current title will be played back repeatedly.
jAll – All the tracks or files will be played back repeatedly.
To return to normal playback, press REPEAT (h) repeatedly to select [Off ].
Audio CDs/Music files
;Track– The current track or file will be played back repeatedly.
:All – All the tracks or files will be played back repeatedly.
l – The tracks or files will be played back in random order.
l:All – All the tracks or files will be played back repeatedly in random order.
kA-B – Selected portion will be repeated continually. (Audio CD only)
To return to normal playback, press CLEAR.
,
Note y If you press V once during Repeat
Chapter/Track playback, the repeat playback cancels.
y This function may not work on some disc or title.
Repeating a specific portion
eroty
This player can repeat a portion you have selected.
1. While playback, press REPEAT (h) to select
[A-] at the beginning of the portion you wish to repeat.
2. Press ENTER (b) at the end of the portion. Your selected portion will be repeated continually.
3. To return to normal playback, press REPEAT
(h) repeatedly to select [Off].
,
Note y You cannot select a portion less than 3 seconds.
y This function may not work on some disc or title.
Viewing content information
y
The player can display the content information.
1. Select a file using W/S/A/D.
2. Press INFO/MENU (m) to display the option menu.
3. Select the [Information] option using W/S, and press ENTER (b).
The file information appears on the screen.
While movie playback, you can display the file information by pressing TITLE/POPUP.
,
Note
The information displayed on the screen may not correct comparing actual content information.
Changing content list view
yui
On the [Movie], [Music] or [Photo] menu, you can change the content list view.
Method 1
Press red (R) colored button repeatedly.
Operating
47
Selecting a subtitle file
y
If the subtitle file name is different from the movie file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
1. Use W/S/A/D to select the subtitle file you wish to play in the [Movie] menu.
2. Press ENTER (b).
Press ENTER (b) again to deselect the subtitle file. Selected subtitle file will be displayed when you play the movie file.
,
Note y If you press
Z (STOP) while playback, the subtitle selection is cancelled.
y This function is not available for playing file on a server via home network.
4
Method 2
1. On the content list, press INFO/MENU (m) to display the option menu.
2. Use W/S to select the [View Change] option.
3. Press ENTER (b) to change the content list view.
4
48
Operating
Options while viewing a photo
i
You can use various options during viewing a photo in full screen.
1. While viewing a photo in full screen, press INFO/
MENU (m) to display the option menu.
2. Select an option using W/S.
Listening to music while slide show
i
You can display photo files while listening to music files.
1. While viewing a photo in full screen, press INFO/
MENU (m) to display the option menu.
2. Use W/S to select [Music Select] option, and press ENTER (b) to display the [Music Select] menu.
3. Use W/S to select a device, and press ENTER
(b).
Device that you can select are differ depending on the location of the photo file you are displaying in full screen.
Photo location
Disc, USB
DLNA server
Available Device
Disc, USB
DLNA server
4. Use W/S to select a file or a folder you wish to play.
a Current photo/Total number of photos
– Use A/D to view previous/next photo.
b Slide Show – Press ENTER ( b) to start or pause slide show.
c Music Select – Select the background
music for the slide show (page 48).
d Music –Press ENTER ( b) to start or pause background music.
e Rotate – Press ENTER ( b) to rotate the photo clockwise.
f Zoom – Press ENTER ( b) to display the
[Zoom] menu.
g Effect – Use A/D to select a transition effect between photos in a slide show.
h Speed – Use A/D to select a delaying speed between photos in a slide show.
3. Press BACK ( ) to exit the option menu.
Select g and press ENTER (b) to display the upper directory.
,
Note
When selecting music file from a server, folder selection is not available. Only file selection is available.
5. Use D to select [OK], and press ENTER (b) to complete music selection.
Operating
49
On-Screen display
You can display and adjust various information and settings about the content.
Displaying content information on-screen
eroy
1. While playback, press INFO/MENU (m) to show various playback information.
2. Select an option using W/S.
3. Use A/D to adjust the selected option value.
4. Press BACK ( ) to exit the On-Screen display.
,
Note y If no button is pressed for a few seconds, the on-screen display disappears.
y A title number cannot be selected on some discs.
y Available items may differ depending on discs or titles.
y If an interactive Blu-ray Disc is playing back, some setting information is displayed on the screen but prohibited to be changed.
4
a Title – current title number/total number of titles b Chapter – current chapter number/total number of chapters c Time – elapsed playing time/total playback time d Audio – selected audio language or channel e Subtitle – selected subtitle.
f Angle – selected angle/total number of angles g TV Aspect Ratio – selected TV aspect Ratio h Picture Mode – selected picture mode
4
50
Operating
Playing from selected time
eroy
1. Press INFO/MENU (m) during playback. The time search box shows the elapsed playing time.
2. Select the [Time] option and then input the required start time in hours, minutes, and seconds from left to right.
For example, to find a scene at 2 hours, 10 minutes, and 20 seconds, enter “21020”.
Press A/D to skip the playback 60 seconds forward or backward.
3. Press ENTER (b) to start playback from selected time.
,
Note y This function may not work on some disc or titles.
y This function may not work depending on the file type and ability of the DLNA server.
Hearing a different audio
eroy
1. During playback, press INFO/MENU (m) to display the On-Screen display.
2. Use W/S to select the [Audio] option.
3. Use A/D to select desired audio language, audio track or audio channel.
,
Note y Some discs allow you to change audio selections only via the disc menu. In this case, press TITLE/POP-UP or DISC MENU button and choose the appropriate audio from the selections on the disc menu.
y Immediately after you have switched sound, there may be a temporary discrepancy between the display and actual sound.
y On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH] in the on-screen display.
y You can select the [Audio] option on the
On-Screen display directely by pressing
AUDIO button.
Selecting a subtitle language
eroy
1. During playback, press INFO/MENU (m) to display the On-Screen display.
2. Use W/S to select the [Subtitle] option.
3. Use A/D to select desired subtitle language.
4. Press BACK ( ) to exit the On-Screen display.
,
Note y Some discs allow you to change subtitle selections only via the disc menu. If this is the case, press TITLE/POPUP or DISC MENU button and choose the appropriate subtitle from the selections on the disc menu.
y You can select the [Subtitle] option on the
On-Screen display directely by pressing
SUBTITLE button.
Watching from a different angle
er
If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback.
1. During playback, press INFO/MENU (m) to display the On-Screen display.
2. Use W/S to select the [Angle] option.
3. Use A/D to select desired angle.
4. Press BACK ( ) to exit the On-Screen display.
Changing the TV Aspect Ratio
eoy
You can change the TV aspect ratio setting while playback.
1. During playback, press INFO/MENU (m) to display the On-Screen display.
2. Use W/S to select the [TV Aspect Ratio] option.
3. Use A/D to select desired option.
4. Press BACK ( ) to exit the On-Screen display.
,
Note
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Setup] menu is not changed.
Operating
51
Changing the Picture Mode
eroy
You can change the [Picture mode] option while playback.
1. During playback, press INFO/MENU (m) to display the On-Screen display.
2. Use W/S to select the [Picture Mode] option.
3. Use A/D to select desired option.
4. Press BACK ( ) to exit the On-Screen display.
Setting the [User] option
1. During playback, press INFO/MENU (m) to display the On-Screen display.
2. Use W/S to select the [Picture Mode] option.
3. Use A/D to select the [User setting] option, and press ENTER (b).
Changing subtitle code page
y
If the subtitle is displayed in broken letter, you can change the subtitle code page to view the subtitle file properly.
1. During playback, press INFO/MENU (m) to display the playback menu.
2. Use W/S to select the [Code Page] option.
3. Use A/D to select desired code option.
4. Use W/S/A/D to adjust the [Picture Mode] options.
Select [Default] option then press ENTER (b) to reset the all video adjustments.
5. Use W/S/A/D to select the [Close] option, and press ENTER (b) to finish setting.
4
4. Press BACK ( ) to exit the On-Screen display.
4
52
Operating
Radio Operations
Be sure that the antennas are connected.
Listening to the radio
1. Press FUNCTION until TUNER (FM) appears in the display window. The last received station is tuned in.
2. Press and hold TUNING (-/+) for about two seconds until the frequency indication starts to change. Scanning stops when the unit tunes in a station. Or Press TUNING (-/+) repeatedly.
3. Adjust the volume by pressing VOL (+/-).
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned down the volume.
1. Press FUNCTION until the TUNER (FM) appears in the display window.
2. Select the desired frequency by using TUNING
(-/+).
3. Press ENTER (b) a preset number will flash in the display window.
4. Press PRESET (-/+) to select the preset number you want.
5. Press ENTER (b). The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
Deleting a saved station
1. Press PRESET (- / +) to select a preset number you want to delete.
2. Press CLEAR, the preset number will blink in the display window.
3. Press CLEAR again, to delete the selected preset number.
Deleting all the saved stations
Press and hold CLEAR for two seconds.
“ERASE ALL” will flash up. Press CLEAR again. Then all the saved stations are deleted.
Improving poor FM reception
Press B (blue) (MONO/STEREO) colored button on the remote control. This will change the tuner from stereo to mono and usually improve the reception.
Using the Premium
You can use various content services via Internet with the Premium feature.
1. Check the network connection and settings
(pages 24-28).
2. Press HOME ( ).
3. Select the [Premium] using A/D, and press
ENTER (b).
Operating
53
Using the LG Apps
You can use the LG application services on this player via Internet. You can easily find and download various applications from LG App store.
Depending on the region, the LG Apps service may not be available at the moment. The service will become available in these regions through at software update.
1. Check the network connection and settings
(page 24-28).
2. Press HOME ( ).
3. Select the [LG Apps] using A/D, and press
ENTER (b).
4. Select an on-line service using W/S/A/D, and press ENTER (b).
,
Note y Detailed information of each service, contact to the content provider or visit suppot link of the service.
y The content of Premium services and service related information, including user interface, is subject to changes. Please refer to the web site of each service for most upto-date information.
y Using Premium features with wireless network connection may result in improper streaming speed by interference from household devices that are using radio frequencies.
y When you are first time to access [Premium] or [LG Apps] feature, current country setting appears. If you want to change the country setting, select [EDIT] and press ENTER (b).
4. Select a category using A/D, and press ENTER
(b).
5. Use W/S/A/D to select an application, and press ENTER (b) to display the information.
6. Press ENTER (b) while [Install] icon is highlighted. The application will be installed to the player.
To install an application to the player, user
needs to sign in. Refer to page 54 for more
information of signning in.
7. Press yellow (Y) colored button to display the
[My Apps] screen.
8. Select the installed application and press ENTER
(b) to excute it.
,
Note
To install a paid application, you need to be a paid member. Visit www.lgappstv.com for more information.
4
4
54
Operating
Signing in
To use the [LG Apps] feature, you need to sign in with your account.
1. On the [LG Apps] or [My Apps] screen, press red
(R) colored button.
2. Fill the [ID] and [Password] field using the virtual keyboard.
If you do not have an account, press red (R) colored button to register.
3. Use W/S/A/D to select [OK], and press
ENTER (b) to sign in with your account.
If you select the [Auto Sign In] check box, your ID and password are remembered and automatically signed in without entering them.
,
Note y If you want to sign in with other account, press red (R) colored button on [LG Apps] or
[My Apps] screen, and select [Change User] option.
y To view the information of your account and applications, press red (R) colored button on
[LG Apps] or [My Apps] screen, and select
[Account Setting] option.
Managing my Apps
You can move or delete an installed application in the [My Apps] menu.
Move an application
1. Select an application, and press green (G) colored button to display the options.
2. Use W/S to select [Move], and press
ENTER(b).
3. Use W/S/A/D to select a position you want to move to, and press ENTER (b).
Delete an application
1. Select an application, and press green (G) colored button to display the options.
2. Use W/S to select [Delete], and press
ENTER(b).
3. Use A/D to select [Yes], and press ENTER (b) to confirm.
Troubleshooting
55
Troubleshooting
General
Symptom Cause & Solution
The Power does not turned on.
y Plug the power cord into the wall outlet securely.
The unit does not start playback.
The angle cannot be changed.
y Multi-angles are not recorded on the DVD Video being played.
Cannot play movie, photo or music files.
y The files are not recorded in a format that the unit can play.
y The unit does not support the codec of the movie file.
The remote control does not work properly.
y Insert a playable disc. (Check the disc type, color system, and regional code.) y Insert the disc with the playback side down.
y Clean the disc.
y Cancel the Rating function or change the rating level.
The unit is plugged in, but the power will not turn on or off.
The unit is not operating normally.
y The remote control is not pointed at the remote sensor of the unit.
y The remote control is too far from the unit.
y There is an obstacle in the path of the remote control and the unit.
y The batteries in the remote control are exhausted.
You can reset the unit as follows.
y Unplug the power cord, wait at least five seconds, and then plug it in again.
5
5
56
Troubleshooting
Network
Symptom Cause & Solution
BD-Live feature does not work.
y The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space.
y Ensure that the unit is correctly connected to the local area network and can access the internet (see page 24-28).
y Your broadband speed may not fast enough to use the BD-LIVE features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended.
y The [BD-LIVE connection] option in the [Setup] menu is set to
[Prohibited]. Set the option to [Permitted].
Streaming video services (such as YouTube™, etc.) are often stopped or “buffer” during playback.
Shared folder or files from your
PC or a media server are not displayed on the device list.
y Your broadband service speed may not be fast enough to stream video services. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended.
y The firewall or anti-virus software on your media server is running.
Turn off the firewall or anti-virus software running on your media server.
y The player is not connected to the local area network that your media server is connected.
Cannot connect the player to the access point or wireless
LAN router.
Access point is not displayed on the “Access point name” list.
y The wireless communication may be interrupted from household devices that are using radio frequencies. Move the player away from them.
y The access point or wireless LAN router may not broadcast its SSID.
Set your access point to broadcast its SSID through your computer.
y Your network device such as access point may not set with available frequency range and channel that this player can support.
Try setting the frequency range and channel on the network device setting.
Troubleshooting
57
Picture
Symptom
There is no picture.
Picture noise appears
Blu-ray 3D disc playback does not output 3D views.
Cause & Solution
y Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen.
y Connect the video connection securely.
y Check the [HDMI Color Setting] in the [Setup] menu is set to the appropriate item that conforms to your video connection.
y Your TV may not support the resolution you have set on the player.
Change the resolution that your TV accepts.
y The player’s HDMI OUT jack is connected to a DVI device that does not support copyright protection.
y You are playing a disc recorded in a colour system that is different from your TV.
y Set the resolution which your TV accepts.
y Connect the player to your TV with HDMI cable (Type A, High Speed
HDMI™ Cable with Ethernet).
y Your TV may not support “HDMI 3D mandatory format”. y The [3D Mode] option in the [Setup] menu is set to [Off ].
Set the option to [On].
Sound
Symptom
There is no sound or the sound is distorted.
Cause & Solution
y The unit is in scan, slow motion, or pause mode.
y The sound volume is low.
y Check the speaker cable connection. (page 17)
Customer Support
You can update the Player using the latest software to enhance the products operation and/or add new features. To obtain the latest software for this player (if updates have been made), please visit http://www.lg.com/global/support or contact LG Electronics customer care centre.
Open source software notice
To obtain the corresponding source code under GPL, LGPL, MPL and other open source licenses, please visit http://opensource.lge.com. All referred license terms, warranty disclaimers and copyright notices are available to download with the source code.
5
6
58
Appendix
Controlling a TV with the Supplied Remote
Control
You can control your TV using the buttons below.
By pressing
1 (TV POWER)
AV/INPUT
PR/CH W/S
You can
Turn the TV on or off.
Switch the TV’s input source between the TV and other input sources.
Scan up or down through memorized channels.
VOL +/– Adjust the volume of the TV
,
Note
Depending on the unit being connected, you may not be able to control your TV using some of the buttons.
Setting up the remote to control your TV
You can operate your TV with the supplied remote control.
If your TV is listed in the table below, set the appropriate manufacturer code.
1. While holding down 1 (TV POWER) button, and press the manufacturer code for your
TV with the numerical buttons (see the table below).
Manufacturer Code Number
LG 1(Default), 2
Zenith
GoldStar
Samsung
1, 3, 4
1, 2
6, 7
Sony
Hitachi
8, 9
4
2. Release the 1 (TV POWER) button to complete setting.
Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.
Appendix
59
Network Software
Update
Network update notification
From time to time, performance improvements and/or additional features or services may be made available to units that are connected to a broadband home network. If there is new software available and the unit is connected to a broadband home network, the player will inform you about the update as follows.
Option 1:
1. The update menu will appear on the screen when you turn off the player.
2. Use A/D to select a desired option and then press ENTER (b).
Software Update
You can update the player using the latest software to enhance the products operation and/or add new features. You can update the software by connecting the unit directly to the software update server.
,
Note y Before updating the software in your player, remove any disc and USB Device from the player.
y Before updating the software in your player, turn the player off and then turn it back on.
y During the software update procedure,
do not turn off the player or disconnect
AC power, or do not press any button.
y If you cancel the update, turn off the power and turn it on for stable performance.
y This unit cannot be updated to previous software version.
1. Check the network connection and settings
(page 24-28).
2. Select [Software] option in the [Setup] menu then press ENTER (b).
3. Select [Update] option, and press ENTER (b).
[OK]
Starts the software update.
[Cancel]
Exits the update menu and turns the power off.
Option 2:
If the software update is available from the update server, the “Update” icon appears in the Home menu. Press blue (B) colored button to start the update procedure.
The player will check for the newest update.
,
Note y Pressing ENTER ( b) while checking for the update will end the process.
y If there is no update available, the Message,
“No update is found.” appears. Press ENTER
(b) to return to the [Home Menu].
6
6
60
Appendix
4. If newer version exists, the message “Do you want to download it?” appears.
5. Select [OK] to start update. (Selecting [Cancel] will end the update.)
6. The player starts downloading the newest update from the server. (Downloading will takes several minutes depending on your home network condition)
7. When downloading is completed, the message,
“Download is complete. Do you want to update?” appears.
8. Select [OK] to start updating. (Selecting [Cancel] will end the update and downloaded file will not be re-usable. To update software the next time, the software update procedure has to be started from the beginning again.)
>
Caution
Do not turn off the power during the software update.
9. When update is completed, the power will be turned automatically in a few seconds.
10. Turn the power back on. The system now operates with the new version.
,
Note
The Software Update function may not work properly depending on your internet environment. In this case, you can obtain the latest software from the authorized LG
Electronics Service Centre then update your
player. Refer to “Customer Support” on page
Appendix
61
About Nero
MediaHome 4
Essentials
Nero MediaHome 4 Essentials is a software for sharing movie, music and photo files stored on your computer to this player as a DLNA-compatiable digital media server.
,
Note y The Nero MediaHome 4 Essentials CD-
ROM is designed for PCs and should not be inserted in this player or in any product other than a PC.
y The supplied Nero MediaHome 4 Essentials
CD-ROM is a customized software edition only for sharing files and folders to this player.
y The supplied Nero MediaHome 4 Essentials software does not support following functions: Transcoding, Remote UI, TV control, Internet services and Apple iTunes y The supplied Nero MediaHome 4 Essentials software can be downloaded at http://www.
lg.com/global/support. Find the download link on the web page of this product. y This manual explains operations with the English version of Nero MediaHome
4 Essentials as examples. Follow the explanation referring to the actual operations of your language version.
System Requirements
Windows PC
y Windows® XP (Service Pack 2 or higher), Windows
Vista® (no Service Pack required), Windows® 7
(no Service Pack required), Windows® XP Media
Center Edition 2005 (Service Pack 2 or higher),
Windows Server® 2003 y Windows Vista® 64-bit edition (application runs in 32-bit mode) y Windows® 7 64-bit edition (application runs in
32-bit mode) y Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome standalone y 1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors y Memory: 256 MB RAM y Graphics card with at least 32 MB video memory, minimum resolution of 800 x 600 pixels, and 16bit color settings y Windows® Internet Explorer® 6.0 or higher y DirectX® 9.0c revision 30 (August 2006) or higher y Network environment: 100 Mb Ethernet, WLAN
Macintosh
y Mac OS X 10.5 (Leopard) or 10.6 (Snow Leopard) y Macintosh computer with an Intel x86 processor y Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome standalone y Memory: 256 MB RAM
6
6
62
Appendix
Installing Nero MediaHome 4
Essentials
Windows
Start up your computer, and insert the supplied CD-
ROM disc into your computer’s CD-ROM drive. An installation wizard will walk you through the quick and uncomplicated installation process. To install
Nero MediaHome 4 Essentials, proceed as follows:
1. Close all Microsoft Windows programs and exit any anti-virus software that may be running.
2. Insert the supplied CD-ROM disc into your computer’s CD-ROM drive.
3. Click [Nero MediaHome 4 Essentials].
4. Click [Run] to start installation.
5. Click [Nero MediaHome 4 Essentials]. The installation is prepared and the installation wizard appears.
6. Click the [Next] button to display the serial number input screen. Click [Next] to go to the next step.
7. If you accept all conditions, click [I accept the License Conditions] check box and click
[Next]. Installation is not possible without this agreement.
8. Click [Typical] and click [Next]. The installation process is started.
9. If you want to take part in the anonymous collection of data, select the check box and click the [Next] button.
10. Click the [Exit] button to complete the installation.
Mac OS X
1. Start up your computer, and insert the supplied
CD-ROM disc into your computer’s CD-ROM drive.
2. Browse the CD-ROM drive and open the
“MediaHome_4_Essentials_MAC” folder.
3. Double-click the “Nero MediaHome.dmg” image file. The Nero MediaHome window is opened.
4. In the Nero MediaHome window, drag the Nero
MediaHome icon either to the Applications folder within the window or to any other desired location.
5. You can now start the application by doubleclicking the Nero MediaHome icon in the location you dragged it to.
Sharing files and folders
On your computer, you must share the folder contained movie, music and/or photo content to play them on this player.
This parts explains the procedure for selecting the shared folders on your computer.
1. Double-click the “Nero MediaHome 4 Essentials” icon.
2. Click [Network] icon on the left and define your network name in the [Network name] field. The
Network name you enter will be recognized by your player.
3. Click [Shares] icon on the left.
4. Click [Local Folders] tab on the [Shares] screen.
5. Click [Add] icon to open the [Browse Folder] window.
6. Select the folder containing the files you want to share. The selected folder is added to the list of shared folders.
7. Click [Start Server] icon to start the server.
,
Note y If the shared folders or files are not displayed on the player, click the folder on the [Local
Folders] tab and click [Rescan Folder] at the
[More] button.
y Visit www.nero.com for more information and software tools
Appendix
63
Area Code List
Choose an area code from this list.
Area Code Area Code Area Code Area Code
Afghanistan AF Fiji FJ Monaco MC Singapore SG
Argentina
Australia
Austria
AR
AU
AT
Finland
France
Germany
FI
FR
DE
Mongolia
Morocco
Nepal
MN
MA
NP
Slovak Republic
Slovenia
South Africa
SK
SI
ZA
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
BE
BT
BO
BR
KH
CA
CL
CN
Great Britain
Greece
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
GB
GR
GL
HK
HU
IN
ID
IL
Netherlands
Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
NL
AN
NZ
NG
NO
OM
PK
PA
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
TW
TH
TR
KR
ES
LK
SE
CH
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
CO
CG
CR
HR
CZ
DK
EC
EG
SV
ET
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
Maldives
Mexico
IT
JM
JP
KE
KW
LY
LU
MY
MV
MX
Paraguay
Philippines
Poland
Portugal
Romania
Russian
Federation
Saudi Arabia
Senegal
PY
PH
PL
PT
RO
RU
SA
SN
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
UY
UZ
VN
ZW
UG
UA
US
6
6
64
Appendix
Language code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
Language Code Language Code Language Code Language Code
Afar 6565 French 7082 Lithuanian 7684 Sindhi 8368
Afrikaans
Albanian
Amharic
Arabic
6570
8381
6577
6582
Frisian
Galician
Georgian
German
7089
7176
7565
6869
Macedonian
Malagasy
Malay
Malayalam
7775
7771
7783
7776
Singhalese
Slovak
Slovenian
Spanish
8373
8375
8376
6983
Armenian
Assamese
Aymara
7289
6583
6588
Azerbaijani
Bashkir
6590
6665
Basque 6985
Bengali; Bangla 6678
Bhutani 6890
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
6976
7576
7178
7185
7265
7387
7273
7285
Maori
Marathi
Moldavian
Mongolian
Nauru 7865
Nepali
Norwegian
Oriya
7773
7782
7779
7778
7869
7879
7982
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Telugu
Thai
8385
8387
8386
8476
8471
8465
8469
8472
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Chinese
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
6672
6682
6671
7789
6669
9072
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
7383
7378
7365
7165
7384
7465
7578
7583
7575
7589
7579
7585
Laotian
Latin
7679
7665
Latvian, Lettish 7686
Lingala 7678
Panjabi 8065
Pashto, Pushto 8083
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian 8279
Russian 8285
Samoan
Sanskrit
Scots Gaelic
Serbian 8382
Serbo-Croatian 8372
Shona
7065
8076
8084
8185
8377
8365
7168
8378
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
8590
8673
8679
6789
8779
8872
8479
8482
8475
8487
8575
8582
7473
8979
9085
Appendix
65
Trademarks and
Licenses
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™,
BONUSVIEW™ and the logos are trademarks of the Blu-ray Disc Association.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,392,195; 7,272,567; 7,333,929; 7,212,872 & other
U.S. and worldwide patents issued & pending.
DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD
Master Audio | Essential is a trademark of DTS,
Inc. Product includes software. © DTS, Inc. All
Rights Reserved.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
Java is a trademark of Oracle and/or its affiliates.
The Wi-Fi Protected Setup Mark is a trademark of the Wi-Fi Alliance.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
6
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or certification marks of the Digital Living Network Alliance.
6
66
Appendix
Cinavia Notice
This product uses Cinavia technology to limit the use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks.
When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box
86851, San Diego, CA, 92138, USA.
This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010
Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
Appendix
67
Audio Output Specifications
Source
Jack/Setting
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM Stereo
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM Multi-Ch
PCM 5.1ch
PCM 5.1ch
PCM 5.1ch
PCM 5.1ch
PCM 5.1ch
PCM 2ch
PCM 5.1ch
PCM 5.1ch
HDMI OUT
DTS Re-encode
*
3
DTS
DTS
DTS
DTS
DTS
DTS
DTS
DTS
BitStream
*
1
*
2
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
*1 The secondary and interactive audio may not be included in the output bitstream if [Digital
Output] option is set to [BitStream]. (Except
LPCM Codec : the output always include interactive and secondary audio.)
*2 This player automatically selects the HDMI audio according to the decoding capability of the connected HDMI device even though [Digital
Output] option is set to [BitStream].
*3 If the [Digital Output] option is set to [DTS reencode], the audio output is limited to 48 kHz and 5.1Ch. If the [Digital Output] option is set to [DTS re-encode], the DTS Re-encode audio is outputted for BD-ROM discs, and the original audio is outputted for the other discs (like
[BitStream]).
y The audio is outputted as PCM 48 kHz/16 bit for
MP3/WMA file and PCM 44.1kHz/16 bit for Audio
CD while playback.
y With digital audio connection (HDMI OUT),
Disc Menu button sounds of BD-ROM may not be heard if the [Digital Output] option is set to
[BitStream].
y If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
y Multi-channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. y This setting is not available on the input signal from an external device.
6
6
68
Appendix
Specifications
General
Power requirements
Power consumption
Dimensions (W x H x D)
Net Weight (Approx.)
Operating temperature
Operating humidity
Inputs/Outputs
VIDEO OUT
HDMI IN/OUT (video/audio)
ANALOG AUDIO IN
DIGITAL IN (OPTICAL)
PORT. IN
MIC IN
Tuner
FM Tuning Range
Refer to main label on the rear panel.
Refer to main label on the rear panel.
Approx. 440 X 65 X 297 mm
3.3 kg
5 °C to 35 °C (41 °F to 95 °F)
5 % to 90 %
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
19 pin (Type A, HDMI™ Connector)
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
3 V (p-p), Optical jack x 1
0.5 Vrms (3.5 mm stereo jack)
6.3 mm jack
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Amplifier
Power output (4 Ω/ 3 Ω), (RMS), THD 10 %
Total 1100 W
Front
Center
180 W x 2
180 W
Rear
Sub-Woofer
180 W x 2
200 W (Passive)
Appendix
69
System
Laser
Wavelength
Signal system
Frequency response
Harmonic distortion
Dynamic range
LAN port
Wireless LAN (internal antenna)
Bus Power Supply (USB)
Speakers
Front speaker (Left/ Right)
Type 2 Way 3 speaker
Impedance Rated 4 Ω
Input Power 180 W
Rear speaker (Left/ Right)
Type 2 Way 3 speaker
Impedance Rated 4 Ω
Input Power
Center speaker
Type
180 W
2 Way 3 speaker
Impedance Rated 4 Ω
Input Power
Subwoofer
Type
180 W
1 Way 1 speaker
Impedance Rated 3 Ω
Input Power 200 W
Semiconductor laser
405 nm / 650 nm
Standard PAL/NTSC color TV system
20 Hz to 18 kHz (48 kHz, 96 kHz, 192 kHz sampling)
Less than 0.05 %
More than 80 dB
Ethernet jack x 1, 10BASE-T / 100BASE-TX
Integrated IEEE 802.11n (2.4 GHz band) wireless networking access, compatible with 802.11b/g Wi-Fi networks.
DC 5 V 0 2.1 A
Max. Input power
Net Dimensions
(W x H x D)
Net Weight
Max. Input power
Net Dimensions
(W x H x D)
Net Weight
Max. Input power
Net Dimensions
(W x H x D)
Net Weight
Max. Input power
Net Dimensions
(W x H x D)
Net Weight
360 W
250 X 1200 X 250 mm
4.1 kg
360 W
250 X 1200 X 250 mm
4.1 kg
360 W
330 x 93 x 74 mm
1.3 kg
400 W
251 X 336 X 347 mm
6.3 kg y Design and specifications are subject to change without notice.
6
6
70
Appendix
Maintenance
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.
Keeping the exterior surfaces clean
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.
y Do not use volatile liquids such as insecticide spray near the unit. y Wiping with strong pressure may damage the surface.
y Do not leave rubber or plastic products in contact with the unit for a long period of time.
Maintaining the Unit
The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished.
For details, please contact your nearest authorized service center.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center to out.
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.
Important Information
Relating to Network
Services
All information, data, documents, communications, downloads, files, text, images, photographs, graphics, videos, webcasts, publications, tools, resources, software, code, programs, applets, widgets, applications, products and other content
(“Content”) and all services and offerings (“Services”) provided or made available by or through any third party (each a “Service Provider”) is the sole responsibility of the Service Provider from whom it originated.
The availability of and access to Content and
Services furnished by the Service Provider through the LGE Device are subject to change at any time, without prior notice, including, but not limited to the suspension, removal or cessation of all or any part of the Content or Services.
Should you have any inquiry or problem related to the Content or Services, you may refer to the
Service Provider’s website for the most up-todate information. LGE is neither responsible nor liable for customer service related to the Content and Services. Any question or request for service relating to the Content or Services should be made directly to the respective Content and Service
Providers.
Please note that LGE is not responsible for any
Content or Services provided by the Service
Provider or any changes to, removal of, or cessation of such Content or Services and does not warrant or guaranty the availability of or access to such
Content or Services.
Appendix
71
6
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Blu-Ray player Black
- 1100 W 5.1 channels
- Dolby Digital, Dolby Digital Plus, Dolby TrueHD
- 3D Full HD
- FM radio Radio Data System (RDS)
- Wi-Fi Ethernet LAN