Product Highlights
Gigabit Ethernet Speed
High-speed ports provide Gigabit Ethernet
technology while remaining backward compatible for
connections to older computers and equipment
Revolutionary Energy Efficiency
Innovative D-Link Green features help to conserve
energy without affecting performance so you can
reduce operating costs and protect the environment
Smart and Flexible Management
Powerful switch management functions can be
performed through a web management interface or
through the D-Link Network Assistant Utility
DGS-1100 Series
Gigabit Smart Switches
Features
D-Link’s DGS-1100 Series provide an affordable solution for SOHOs and Small and Medium
Physical
that require simple network management. Most models comes in a compact desktop-sized
• Various selection of port counts, with or without
PoE and fiber support
• Fanless design for silent operation (non-PoE
models only)
Green Technology
Businesses as well as enterprise deployment, such as in branch offices and meeting rooms
metal case and features a wide selection of Gigabit port configurations with optional Gigabit
fibre uplink ports. There are 4 switches in the series supporting Power-over-Ethernet with 2
of the switches in the offering high-power-budget PoE for businesses looking to power VoIP
phones, wireless access points or network cameras. The 10-port DGS-1100-10MP supports up
to 30W on eight ports with a power budget of 130W, whereas the DGS-1100-26MP provides 24
• Link Status detection
PoE-enabled ports, a power budget of 370W, and all PoE-enabled ports supports up to 30W.
• IEEE 802.3az compliant
Advanced management features, diagnostic and troubleshooting tools, and energy efficient
• Time-based PoE (PoE models excluding DGS1100-08P)
technologies provide a flexible solution to suit your networking requirements.
Advanced Features
Easy to deploy
• IGMP Snooping
The DGS-1100 Series supports an intuitive D-Link Network Assistant Utility and a web-based
• Bandwidth Control
management interface. The D-Link Network Assistant Utility allows customers to discover all
• IEEE 802.1Q VLAN traffic segregation
switches in the D-Link Smart Switch family within the same L2 network segment. With this
• Port-based VLAN
utility, users do not need to change the IP address of their PC, which also makes the initial setup
• IEEE 802.1p QoS
of the Smart Switches quick and easy. Switches within the same L2 network segment that are
• Surveillance VLAN
• Voice VLAN
Management Features
• Client-based utility or web-based GUI
• Built-in SNMP MIB1
Surveillance Features (MP Models)
• Full PoE budget and ultra-high power ports
• Per-port 6 kV surge protection
connected to the user’s PC are displayed on-screen for instant access. This allows for extensive
switch configuration and basic setup of discovered devices, including password changes and
firmware upgrades. The graphic web-based management interface provides a user-friendly
interface that enables network administrators to remotely control their network down to the
port level.
DGS-1100 Series Gigabit Smart Switches
Auto Surveillance VLAN and Bandwidth Control
The DGS-1100 Series supports Auto Surveillance VLAN (ASV), and Auto Voice
VLAN, which are best suited for VoIP and video surveillance deployments.
Auto Surveillance VLAN consolidates data and surveillance video transmission
through a single DGS-1100 Series switch, thus sparing businesses the expense
of dedicated hardware and facilities. ASV also ensures the quality of real-time
video for monitoring and control without compromising the transmission
of conventional network data. The Auto Voice VLAN technology enhances
the VoIP service by automatically placing voice traffic from an IP phone to
an assigned VLAN. With higher priority and individual VLAN, these features
guarantee the quality and security of VoIP traffic. Bandwidth Control can
reserve bandwidth on a per port basis for important functions that require
larger bandwidth or have high priority.
Easy Troubleshooting
The DGS-1100 Series features Loopback Detection and Cable Diagnostics to
help network administrators find and solve network problems quickly and
easily. Loopback Detection is used to detect loops created by a specific port
and automatically shut down the affected port. The Cable Diagnostics feature
is designed for network administrators to quickly examine the quality of the
If the worst should happen to your network you need the very best
support and fast. Downtime costs your business money. D-Link
Assist maximises your uptime by solving technical problems
quickly and effectively. Our highly trained technicians are on
standby around the clock, ensuring that award-winning support
is only a phone call away.
With a choice of three affordable service offerings covering all
D-Link business products, you can select the package that suits
you best:
D-Link Assist Gold - for comprehensive 24-hour support
D-Link Assist Gold is perfect for mission-critical environments
where maximum uptime is a high priority. It guarantees four hour
around-the-clock response. Cover applies 24/7 for every day of the
year including holidays.
copper cables, recognise the cable type, and detect cable errors.
D-Link Assist Silver - for prompt same-day assistance
Advanced Features
D-Link Assist Silver is designed for ‘high availability’ businesses that
require rapid response within regular working hours. It provides a
four hour response service Monday to Friday from 8am to 5pm,
excluding holidays.
DGS-1100 Series is equipped with advanced security features such as Static
MAC, Storm Control, and IGMP Snooping. Static MAC allows users to create a
MAC whitelist for specific ports, helping administrators limit network access
to authorised devices only. Storm Control monitors broadcast, multicast, or
unknown unicast traffic and will start blocking or discarding packets which
could flood the network when the defined threshold is exceeded. IGMP
Snooping is able to reduce the loading of L3 multicast routers and save
bandwidth in network throughput.
PoE Support
The DGS-1100-08P/24P/10MP/26MP provide support for Power over Ethernet
(PoE), reducing deployment time for IP cameras, VoIP phones, and access
points. Dedicated power adapters are no longer required, as the DGS-110024P/10MP/26MP comply with IEEE 802.3af and 802.3at PoE standards and
provide up to 30 watts per port. The DGS-1100-08P complies with the 802.3af
standard and provides up to 15.4 watts per por.
D-Link Assist Bronze - for guaranteed response on the
next business day
D-Link Assist Bronze is a highly cost-effective support solution for
less critical environments. Response is guaranteed within eight
business hours Monday to Friday from 8am to 5pm, excluding
holidays.
D-Link Assist can be purchased together with any D-Link business
product. So whether you’re buying switching, wireless, storage,
security or IP Surveillance equipment from D-Link, your peace
of mind is guaranteed. D-Link Assist also offers installation and
configuration services to get your new hardware working quickly
and correctly.
DGS-1100 Series Gigabit Smart Switches
Technical Specifications
General
DGS-1100-08
Size
Number of Ports
Port Functions
DGS-1100-16
DGS-1100-18
Desktop
• 8 10/100/1000 Mbps
•
•
•
•
•
DGS-1100-24
DGS-1100-26
11-inch Desktop/Rackmount Size, 1U Height
• 16 10/100/1000 Mbps
IEEE 802.3 compliant
IEEE 802.3u compliant
IEEE 802.3ab compliance
IEEE 802.3az compliant
Auto-negotiation
• 16 10/100/1000 Mbps
• 2 SFP 1000 Mbps
•
•
•
• 24 10/100/1000 Mbps
• 24 10/100/1000 Mbps
• 2 SFP 1000 Mbps
Auto MDI/MDIX
IEEE 802.3x Flow Control supports Full-Duplex mode
Supports half/full-duplex operation (full/half
at 10/100 Mbps, full at 1000 Mbps)
Performance
Switching Capacity
16 Gbps
32 Gbps
36 Gbps
48 Gbps
52 Gbps
Maximum Forwarding Rate
11.9 Mpps
23.81 Mpps
26.79 Mpps
35.71 Mpps
38.69 Mpps
MAC Address Table Size
8K Entries
8K Entries
16K Entries
Packet Buffer
2 Mbits
512 Kbits
1.5 Mbits
Flash Memory
2 Mbyte
8K Entries
16K Entries
512 Kbits
1.5 Mbits
8 Mbyte
LEDs
Power (per device)





Link/Activity/Speed (per port)





4.89 watts
9.31 watts
14.88 watts
13.94 watts
19.04 watts
Power Consumption
Maximum
Physical
Power Input
MTBF
100 to 240 V AC
50 to 60 Hz External
Power Adapter
503,585 hours
100 to 240 V AC
50 to 60 Hz Internal Power Supply
2,827,541 hours
Acoustics
Heat Dissipation
2,671,256 hours
2,406,109 hours
2,277,645 hours
0 dB(A)
16.68 BTU/hr
31.77 BTU/hr
50.77 BTU/hr
47.57 BTU/hr
64.97 BTU/hr
Weight
0.42 kg (0.925 lbs)
1.53 kg (3.37 lbs)
1.56 kg (3.44 lbs)
1.63 kg (3.59 lbs)
1.66 kg (3.66 lbs)
Dimensions
171 x 98 x 28 mm
(6.7 x 3.85 x 1.1
inches)
280x 180x 44 mm
(11.02 x 7.08 x 1.73
inches)
280x 180x 44 mm
(11.02 x 7.08 x 1.73
inches)
280x 180x 44 mm
(11.02 x 7.08 x 1.73
inches)
280x 180x 44 mm
(11.02 x 7.08 x 1.73
inches)
Ventilation
Fanless
Operating Temperature
0 to 40 °C (32 to 104 °F)
-5 to 50 °C (23 to 122 °F)
Storage Temperature
-10 to 70 °C (14 to 158 °F)
-40 to 70 °C (-40 to 158 °F)
Operating Humidity
10% to 95%
non-condensing
0% to 95% non-condensing
Storage Humidity
5% to 95%
non-condensing
0% to 95% non-condensing
FCC Class A, CE Class A,
VCCI Class A, C-Tick
FCC Class A, CE Class A, VCCI Class A, C-Tick, BSMI, CCC
cUL, CE LVD
cUL, CE LVD, CB, BSMI, CCC
EMI
Safety
DGS-1100 Series Gigabit Smart Switches
Technical Specifications
General
Size
Number of Ports
Port Functions
DGS-1100-08P
DGS-1100-10MP
DGS-1100-24P
DGS-1100-26MP
Desktop
11-inch Desktop/Rackmount
Size, 1U Height
11-inch Desktop/Rackmount
Size, 1U Height
19-inch Rackmount
Size, 1U Height
• 8 10/100/1000 Mbps
(Ports 1 to 8 are PoE
enabled)
•
•
•
•
•
• 8 10/100/1000 Mbps
(Ports 1 to 8 are PoE
enabled)
• 2 SFP 1000 Mbps
IEEE 802.3 compliant
IEEE 802.3u compliant
IEEE 802.3ab compliance
IEEE 802.3af / 802.3at (excluding DGS-1100-08P)
IEEE 802.3x Flow Control supports Full-Duplex mode
• 24 10/100/1000 Mbps
(Ports 1 to 12 are PoE
enabled)
•
•
•
•
•
• 24 10/100/1000 Mbps
(Ports 1 to 24 are PoE
enabled)
• 2 Combo 1000 Mbps
Support manual/auto MDI/MDIX configuration
Auto-negotiation
Support Half/Full-Duplex operation
IEEE 802.3az compliant
Per-port 6 kV surge protection2
Performance
Switching Capacity
16 Gbps
20 Gbps
48 Gbps
52 Gbps
Maximum Forwarding Rate
11.9 Mpps
14.88 Mpps
35.71 Mpps
38.69 Mpps
MAC Address Table Size
8K Entries
16K Entries
8K Entries
16K Entries
Packet Buffer
2 Mbits
1.5 Mbits
512 Kbits
1.5 Mbits
Flash Memory
2 Mbyte
16 MBytes
8 Mbyte
16 MBytes
PoE Standard
802.3af
802.3af/802.3at
802.3af/802.3at
802.3af/802.3at
PoE Capable Ports
Port 1 to 8
Port 1 to 8
Port 1 to 12
Port 1 to 24
PoE Power Budget
64 W
130 W
100 W
370 W
Power (per device)




Link/Activity/Speed (per port)




78.8 watts (PoE on)
141.4 watts (PoE on)
128.32 watts (PoE on)
387 watts (PoE on)
PoE
LEDs
Power Consumption
Maximum
Physical
Power Input
MTBF
100 to 240 V AC, 50 to 60 Hz
External Power Supply
100 to 240 V AC
50 to 60 Hz Internal Power Supply
708,219 hours
291, 575 hours
563,292 hours
269, 291 hours
0 dB(A)
45.4 dB(A)
44.5 dB(A)
56 dB(A)
268.87 BTU/hr
570.51 BTU/hr
437.85 BTU/hr
1470.46 BTU/hr
0.706 kg (1.553 pounds)
1.83 kg
2.15 kg (4.74 lbs)
3.81 kg
Dimensions
190 x 120 x 38 mm
280 x 180 x 44 mm
280x 230x 44 mm
440 x 290 x 44 mm
Ventilation
Fanless
1 x Fan
1 Fan
2 x Fan
Acoustics
Heat Dissipation
Weight
Operating Temperature
0 to 40 °C (32 to 104 °F)
-5 to 50 °C (23 to 122 °F)
Storage Temperature
-10 to 70 °C (14 to 158 °F)
-40 to 70 °C (-40 to 158 °F)
Operating Humidity
10% to 95% non-condensing
0% to 95% non-condensing
Storage Humidity
5% to 95% non-condensing
0% to 95% non-condensing
EMI
Safety
FCC Class A, CE Class A,
VCCI Class A, C-Tick
FCC/IC, CE, VCCI, RCM, BSMI
FCC Class A, CE Class A, VCCI
Class A, C-Tick, BSMI, CCC
FCC/IC, CE, VCCI, RCM, BSMI
cUL, CE LVD
cUL, UL, GS, CB
cUL, CE LVD, CB, BSMI, CCC
cUL, UL, GS, CB
DGS-1100 Series Gigabit Smart Switches
Software Features (DGS-1100-10MP/16/18/24/24P/26P/26MP)
VLAN
• Port-based VLAN
• 802.1Q tagged VLAN
• Auto Surveillance VLAN
• Voice VLAN
• Management VLAN
• Asymmetric VLAN
• VLAN Group
• Supports 128 static VLAN groups
• Max. 4094 VIDs
L2 Features
• Flow Control
• 802.3x Flow Control
• HOL Blocking Prevention
• Jumbo Frames up to 9216 Bytes
• IGMP Snooping
• IGMP v1/v2/v3 awareness Snooping
• Supports 64 Groups
• IGMP Snooping Querier
• 802.3ad Link Aggregation:
• DGS-1100-16: Support max 8 groups per device and 8 ports per group
• DGS-1100-10MP: Support 5 groups per device and 8 ports per group
• DGS-1100-18: Support max 9 groups per device and 8 ports per group
• DGS-1100-24P: Support max 12 groups per device and 8 ports per group
• DGS-1100-26: Support max 13 groups per device and 8 ports per group
• DGS-1100-26MP: Support 13 groups per device and 8 ports per group
• Loopback Detection
• Ethernet Ring Protection Switching2
• G.8032 ERPS
• Cable Diagnostics
• LLDP
• Port Mirroring
• One-to-One
• Many-to-One
• Statistics
• Tx Ok
• Tx Error
• Rx Ok
• Rx Error
• Spanning Tree Protocol
• 802.1D STP
• 802.1w RSTP
Quality of Service (QoS)
• 802.1p Quality of Service
• 4 queues per port
• Queue Handling
• Strict
• Weighted Round Robin (WRR)
• Port-based Bandwidth Control (Rate Limiting)
• Ingress: 8 Kbps
• Egress: 64 Kbps
Security
• D-Link Safeguard
• Traffic Segmentation
• Broadcast/Multicast/Unknown Unicast Storm Control
• DoS Attack Prevention
• SSL
Management
• Web-based GUI (Supports IPv4/IPv6)
• D-Link Network Assistant Utility
Green Technology
• Power Saving by
• Link Status
• LED Shut-Off
• Port Shut-Off
• System Hibernation
• Compliant with IEEE 802.3az Energy Efficient
Ethernet
MIB/RFC Standards
• RFC 768 UDP
• RFC 791 IP
• RFC 792 ICMP
• RFC 793 TCP
• RFC 826 ARP
• RFC 1213 MIB II
• RFC1493 Bridage MIB
• RFC1907 SNMPv2 MIB
• RFC1215 MIB Traps Convention
• RFC2233 Interface Group MIB
• RFC2665 Ether-like MIB
• 802.1p MIB RFC4363
• ZoneDefense MIB
• Private MIB
• RFC 951 BootP client
• RFC 1542 BootP/DHCP client
• RFC 4363 802.1p
• RFC 2236 IGMP Snooping
DGS-1100 Series Gigabit Smart Switches
Software Features (DGS-1100-08/08P)
VLAN
• Port-based VLAN
• 802.1Q tagged VLAN
• Surveillance VLAN
• Voice VLAN
• Management VLAN
• VLAN Group
• Supports 32 static VLAN groups
• Max. 4094 VIDs
L2 Features
• Flow Control
• 802.3x Flow Control
• HOL Blocking Prevention
• Jumbo Frames up to 9216 Bytes
• IGMP Snooping
• IGMP v1/v2 Snooping
• Supports 32 Groups
• Static Trunk
• 2 groups, 2-4 ports per group
• Loopback Detection
• Cable Diagnostics
• Port Mirroring
• One-to-One
• Statistics
• Tx Ok
• Tx Error
• Rx Ok
• Rx Error
Quality of Service (QoS)
• 802.1p Quality of Service
• 4 queues per port
• Queue Handling
• Strict
• Weighted Round Robin (WRR)
• Bandwidth Control
• Port-based (Ingress/Egress, min. granularity 8 Kb/s)
Security
• Static MAC Address
• up to 32 entries
• Broadcast/Multicast/Unknown Unicast Storm Control
Management
• Web-based GUI (Supports IPv4)
• Client-based Utility (SmartConsole Utility)
D-Link Green
• Power Saving by
• Link Status
• Cable Length
RFC Standard List
• RFC 768 UDP
• RFC 791 IP
• RFC 792 ICMP
• RFC 793 TCP
• RFC 826 ARP
Optional SFP Transceivers
1
2
DEM-310GT
1000BASE-LX, single-mode, 10 km
DEM-311GT
1000BASE-SX, multi-mode, 550 m
DEM-314GT
1000BASE-LHX, single-mode, 50 km
Supported by the DGS-1100-10MP/16/18/24/24P/26/26MP
For DGS-1100-10MP/26MP only
For more information: www.dlink.com
D-Link European Headquarters. D-Link (Europe) Ltd., D-Link House, Abbey Road, Park Royal, London, NW10 7BX.
Specifications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners. ©2015 D-Link Corporation. All rights reserved. E&OE.
Updated December 2015
• Compliant with IEEE 802.3az Energy Efficient Ethernet
• Compliant with RoHS 6
• RFC 951 BootP client
• RFC 1542 BootP/DHCP client
• RFC 1945 HTTP/1.0
• RFC 2647 802.1p
• RFC 2236, 4451 IGMP Snooping
Download PDF
Similar pages