ProJet® MJP 5600
Composite multi-material 3D printer
ProJet MJP 5600
Printing Modes
UHD Mode
UHDS Mode
XHD Mode
XHDS Mode
Ultra High Definition
Ultra High Definition-Single
Xtreme High Definition
Xtreme High Definition-Single
Net Build Volume (xyz)*
20.4 x 15 x 11.8 in (518 x 381 x 300 mm)
Resolution (xyz)
UHD Mode
UHDS Mode
XHD Mode
XHDS Mode
Accuracy (typical)
600 x 600 x 1600 DPI; 16 μ layers
600 x 600 x 1600 DPI; 16 μ layers
750 x 750 x 2000 DPI; 13 μ layers
750 x 750 x 2000 DPI; 13 μ layers
±0.001-0.002 inch per inch (0.025-0.05 mm per 25.4 mm) of part dimension.
Accuracy may vary depending on build parameters, part geometry and size, part orientation, and post-processing.
Build Materials
VisiJet CR-BK
VisiJet CR-WT 200**
VisiJet CR-CL 200**
VisiJet CE-BK
VisiJet CE-NT
Rigid Plastic Black
Rigid Plastic White
Rigid Plastic Clear
Elastomeric Black
Elastomeric Natural
Support Material
VisiJet S500 non-toxic wax material for hands- free melt-away supports
Material Packaging
Build and support materials in clean 4.41 lbs (2 kg) bottles
(printer holds 4 build and 4 support bottles with auto-switching)
Electrical
110-127 VAC, 50/60 Hz, 15A, single phase
200-240 VAC, 50 Hz, 10A, single phase
Single C14 receptacle
Dimensions (WxDxH)
3D Printer Crated
3D Printer Uncrated
79 x 65 x 80 in (2007 x 1650 x 2032 mm)
66.9 x 35.4 x 63.8 in (1700 x 900 x 1620 mm)
Weight
3D Printer Crated
3D Printer Uncrated
2600 lbs (1180 kg)
2060 lbs (935 kg)
3D Sprint™ Software
Easy build job set-up, submission and job queue management; Automatic part placement and build optimization tools;
Part stacking and nesting capability; Extensive part editing tools; Automatic support generation; Job statistics reporting tools
E-mail Notice Capability
Yes
Network Compatibility
Network ready with 10/100/1000 base Ethernet interface
Client Hardware Recommendation
Minimum 320Gb internal hard drive capacity
OpenGL 1.1 Compatible
1280 x 1024 resolution or better
USB 2.0 host, single USB type A receptacle / 3.0 USB thumb drives supported at 2.0 USB speeds for export of log files
Client Operating System
Input Data File Formats Supported
Post-Processing
Operating Temperature Range
Noise
5-Year Printhead Warranty
Certifications
*
**
Maximum part size is dependent on geometry, among other factors
Respectively replaces former VisiJet® CR-WT and VisiJet® CR-CL
Windows® 7, Windows 8 or Windows 8.1 (Service Pack)
stl, ctl, slc, 3dprint
ProJet Finisher XL for easy removal of eco-friendly wax supports
64-82 ºF (18-28 ºC)
< 65 dBa estimated (at medium fan setting)
Standard
CE
VisiJet® Base Materials for the ProJet MJP 5600
The VisiJet composite family of materials is precisely mixed by the ProJet MJP 5600 print head on-the-fly to achieve superior mechanical properties and custom
performance characteristics to meet your exacting specifications. This ingenuous system simultaneously prints and blends together flexible and rigid material
composites, layer-by-layer at the pixel level, in a variety of colors and shades including opaque, clear, black or white and numerous shades of gray.
Properties
Condition
VisiJet CR-BK
VisiJet CR-WT 200*
VisiJet CR-CL 200*
VisiJet CE-NT
VisiJet CE-BK
Composition
UV curable
plastic
UV curable
plastic
UV curable
plastic
UV curable
elastomeric
UV curable
elastomeric
Description
Rigid ABS-like
Rigid ABS-like
Rigid
polycarbonate-like
Elastomeric
Elastomeric
Color
Opaque black
Opaque white
Translucent clear
Translucent natural
Opaque black
Bottle Quantity (kg)
2
2
2
2
2
Solid Density (g/cm3)
1.18
1.18
1.18
1.12
1.12
Tensile Strength (MPa)
ASTM D638
45-52
37-47
37-47
0.2-0.4
0.2-0.4
Tensile Modulus (MPa)
ASTM D638
2200-2900
1000-1600
1000-1600
0.27-0.43
0.27-0.43
Elongation at Break
ASTM D638
7-11 %
7-16 %
7-16 %
160-230 %
160-230 %
Flexural Strength (MPa)
ASTM D790
63-76
61-72
61-72
N/A
N/A
Flexural Modulus (MPa)
ASTM D790
1800-2100
1400-2000
1400-2000
N/A
N/A
Impact Strength
(Notched Izod) (J/m)
ASTM D256
17-24
16-19
16-19
N/A
N/A
Shore A Hardness
ASTM 2240
N/A
N/A
N/A
27-33
27-33
Shore D Hardness
ASTM 2240
78-83
76-80
76-80
N/A
N/A
24 hr Water Absorption
ASTM D570
0.5%
0.5%
0.5%
0.9%
0.6%
D648
61 °C
41°C
46 °C
41°C
46 °C
41°C
N/A
N/A
N/A
N/A
N/A
N/A
N/A
3.1 - 3.7
3.1 - 3.7
Heat Distortion Temp
@ 0.45 MPa
@ 1.82 MPa
Tear Resistance (kN/m)
**
ASTM D624
Respectively replaces former VisiJet® CR-WT and VisiJet® CR-CL
DISCLAIMER: It is the responsibility of each customer to determine that its use of any VisiJet® material is safe, lawful and technically suitable to the customer’s intended
applications. The values presented here are for reference only and may vary. Customers should conduct their own testing to ensure suitability for their intended application.
VisiJet® Composite Combinations for the ProJet MJP 5600
In addition to printing in pure base materials, the ProJet MJP 5600 can mix any two base materials together pixel-by-pixel to achieve your targeted properties,
in up to twelve different composite ratios. An entire object can be printed in any of these composites, or a user can easily select a specific region of a part to be
any number of different material combinations.
PROPERTIES
ASTM
MULTI-MATERIAL COMPOSITES (VisiJet CR-BK + VisiJet CE-BK)
RBK-EBKD75
RBK-EBKD70
RBK-EBKD65
RBK-EBKD60
RBK-EBKD55
RBK-EBKA90
RBK-EBKA80
RBK-EBKA70
RBK-EBKA60
RBK-EBKA50
RBK-EBKA40
Description
Very
rigid
Slightly
rigid
Rigid
Rigid
Slightly
rigid
Slightly
flexible
Slightly
flexible
Flexible
Flexible
More
flexible
Very
flexible
Appearance*
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Material Name
Tensile Strength (MPa)
D638
19-27
12-16
8-10
4-5
2-3
1.4-1.9
1.3-1.7
.75-1.1
.48-.77
.35-.48
.23-.32
Flexural Strength (MPa)
D790
18-21
12-13
7-7.4
3.9-4.2
1.6-1.9
N/A
N/A
N/A
N/A
N/A
N/A
Flexural Modulus (MPa)
D790
450-750
350-550
150-250
70-180
30-80
N/A
N/A
N/A
N/A
N/A
N/A
Impact Strength (J/m)
(Notched Izod)
D256
18-25
22-30
32-52
29-42
74-114
N/A
N/A
N/A
N/A
N/A
N/A
Shore A Hardness, Scale A
D2240
N/A
N/A
N/A
N/A
N/A
86-92
75-85
65-75
55-65
45-55
35-45
Shore D Hardness, Scale D
D2240
70-80
65-75
60-70
55-65
50-60
N/A
N/A
N/A
N/A
N/A
N/A
D624
N/A
N/A
N/A
N/A
N/A
44-62
25-32
18-23
11-17
6.6-9.3
6.5-8.5
Tear Resistance (kN/m)
*
Visual approximation. No guarantee that part output will match exactly to software or datasheet values.
PROPERTIES
ASTM
Material Name
Description
RBK-ENTD78
RBK-ENTD75
RBK-ENTD70
RBK-ENTD65
RBK-ENTD60
RBK-ENTD55
RBK-ENTA90
RBK-ENTA80
RBK-ENTA70
RBK-ENTA60
RBK-ENTA50
RBK-ENTA40
Very
rigid
Slightly
rigid
Rigid
Rigid
Slightly
rigid
Slightly
rigid
Slightly
flexible
Slightly
flexible
Flexible
Flexible
More
flexible
Very
flexible
Light
brown
Light
brown
Light
brown
Light
tan
Light
tan
Light
tan
Light
amber
Light
amber
Translucent Translucent Translucent Translucent
dark brown dark brown
brown
brown
Appearance*
Tensile Strength (MPa)
D638
30-39
19-27
12-16
8-10
4-5
2-3
1.4-1.9
1.3-1.7
.75-1.1
.48-.77
.35-.48
.23-.32
Flexural Strength (MPa)
D790
18-21
12-13
7-7.4
3.9-4.2
1.6-1.9
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Flexural Modulus (MPa)
D790
450-750
350-550
150-250
70-180
30-80
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Impact Strength (J/m)
(Notched Izod)
D256
18-25
22-30
32-52
29-42
74-114
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Shore A Hardness, Scale A
D2240
N/A
N/A
N/A
N/A
N/A
N/A
86-92
75-85
65-75
55-65
45-55
35-45
Shore D Hardness, Scale D
D2240
75-81
70-80
65-75
60-70
55-65
50-60
N/A
N/A
N/A
N/A
N/A
N/A
D624
N/A
N/A
N/A
N/A
N/A
N/A
44-62
25-32
18-23
11-17
6.6-9.3
6.5-8.5
Tear Resistance (kN/m)
*
MULTI-MATERIAL COMPOSITES (VisiJet CR-BK + VisiJet CE-NT)
Visual approximation. No guarantee that part output will match exactly to software or datasheet values.
DISCLAIMER: It is the responsibility of each customer to determine that its use of any VisiJet® material is safe, lawful and technically suitable to the customer’s intended applications.
The values presented here are for reference only and may vary. Customers should conduct their own testing to ensure suitability for their intended application.
VisiJet® Composite Combinations
PROPERTIES
ASTM
MULTI-MATERIAL COMPOSITES (VisiJet CR-WT 200** + VisiJet CE-BK)
RWT-EBKD75
RWT-EBKD70
RWT-EBKD65
RWT-EBKD60
RWT-EBKD55
RWT-EBKA90
RWT-EBKA80
RWT-EBKA70
RWT-EBKA60
RWT-EBKA50
RWT-EBKA40
Description
Very
rigid
Slightly
rigid
Rigid
Rigid
Slightly
rigid
Slightly
flexible
Slightly
flexible
Flexible
Flexible
More
flexible
Very flexible
Appearance*
Very light
grey
Lighter
grey
Light
grey
Light
grey
Light
grey
Medium
light grey
Grey
Medium
dark grey
Dark
grey
Darker
grey
Very dark
grey
Material Name
Tensile Strength (MPa)
D638
19-27
12-16
8-10
4-5
2-3
1.4-1.9
1.3-1.7
.75-1.1
.48-.77
.35-.48
.23-.32
Flexural Strength (MPa)
D790
18-21
12-13
7-7.4
3.9-4.2
1.6-1.9
N/A
N/A
N/A
N/A
N/A
N/A
Flexural Modulus (MPa)
D790
450-750
350-550
150-250
70-180
30-80
N/A
N/A
N/A
N/A
N/A
N/A
Impact Strength (J/m)
(Notched Izod)
D256
18-25
22-30
32-52
29-42
74-114
N/A
N/A
N/A
N/A
N/A
N/A
Shore A Hardness, Scale A
D2240
N/A
N/A
N/A
N/A
N/A
86-92
75-85
65-75
55-65
45-55
35-45
Shore D Hardness, Scale D
D2240
70-80
65-75
60-70
55-65
50-60
N/A
N/A
N/A
N/A
N/A
N/A
D624
N/A
N/A
N/A
N/A
N/A
44-62
25-32
18-23
11-17
6.6-9.3
6.5-8.5
Tear Resistance (kN/m)
*
Continued
Visual approximation. No guarantee that part output will match exactly to software or datasheet values.
Respectively replaces former VisiJet® CR-WT and VisiJet® CR-CL
**
PROPERTIES
ASTM
MULTI-MATERIAL COMPOSITES (VisiJet CR-WT 200** + VisiJet CE-NT)
RWT-ENTD75
RWT-ENTD70
RWT-ENTD65
RWT-ENTD60
RWT-ENTD55
RWT-ENTA90
RWT-ENTA80
RWT-ENTA70
RWT-ENTA60
RWT-ENTA50
RWT-ENTA40
Description
Very
rigid
Slightly
rigid
Rigid
Rigid
Slightly
rigid
Slightly
flexible
Slightly
flexible
Flexible
Flexible
More
flexible
Very flexible
Appearance*
Very light
white
Lighter
white
Light
tan
Light
tan
Light
tan
Medium
tan
Medium
tan
Tan
Tan
Amber
Amber
Material Name
Tensile Strength (MPa)
D638
19-27
12-16
8-10
4-5
2-3
1.4-1.9
1.3-1.7
.75-1.1
.48-.77
.35-.48
.23-.32
Flexural Strength (MPa)
D790
18-21
12-13
7-7.4
3.9-4.2
1.6-1.9
N/A
N/A
N/A
N/A
N/A
N/A
Flexural Modulus (MPa)
D790
450-750
350-550
150-250
70-180
30-80
N/A
N/A
N/A
N/A
N/A
N/A
Impact Strength (J/m)
(Notched Izod)
D256
18-25
22-30
32-52
29-42
74-114
N/A
N/A
N/A
N/A
N/A
N/A
Shore A Hardness, Scale A
D2240
N/A
N/A
N/A
N/A
N/A
86-92
75-85
65-75
55-65
45-55
35-45
Shore D Hardness, Scale D
D2240
70-80
65-75
60-70
55-65
50-60
N/A
N/A
N/A
N/A
N/A
N/A
D624
N/A
N/A
N/A
N/A
N/A
44-62
25-32
18-23
11-17
6.6-9.3
6.5-8.5
Tear Resistance (kN/m)
*
Visual approximation. No guarantee that part output will match exactly to software or datasheet values.
Respectively replaces former VisiJet® CR-WT and VisiJet® CR-CL
**
VisiJet® Composite Combinations
PROPERTIES
ASTM
MULTI-MATERIAL COMPOSITES (VisiJet CR-CL 200** + VisiJet CE-BK)
RCL-EBKD75
RCL-EBKD70
RCL-EBKD65
RCL-EBKD60
RCL-EBKD55
RCL-EBKA90
RCL-EBKA80
RCL-EBKA70
RCL-EBKA60
RCL-EBKA50
RCL-EBKA40
Description
Very
rigid
Slightly
rigid
Rigid
Rigid
Slightly
rigid
Slightly
flexible
Slightly
flexible
Flexible
Flexible
More
flexible
Very flexible
Appearance*
Clear
Clear
Light
clear
Light
clear
Light
clear
Medium
light clear
Medium
clear
Medium
clear
Dark
clear
Darker
clear
Very dark
clear
Material Name
Tensile Strength (MPa)
D638
19-27
12-16
8-10
4-5
2-3
1.4-1.9
1.3-1.7
.75-1.1
.48-.77
.35-.48
.23-.32
Flexural Strength (MPa)
D790
18-21
12-13
7-7.4
3.9-4.2
1.6-1.9
N/A
N/A
N/A
N/A
N/A
N/A
Flexural Modulus (MPa)
D790
450-750
350-550
150-250
70-180
30-80
N/A
N/A
N/A
N/A
N/A
N/A
Impact Strength (J/m)
(Notched Izod)
D256
18-25
22-30
32-52
29-42
74-114
N/A
N/A
N/A
N/A
N/A
N/A
D2240
N/A
N/A
N/A
N/A
N/A
86-92
75-85
65-75
55-65
45-55
35-45
70-80
65-75
60-70
55-65
50-60
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
44-62
25-32
18-23
11-17
6.6-9.3
6.5-8.5
Shore A Hardness, Scale A
Shore D Hardness, Scale D D2240
Tear Resistance (kN/m)
*
Continued
D624
Visual approximation. No guarantee that part output will match exactly to software or datasheet values.
Respectively replaces former VisiJet® CR-WT and VisiJet® CR-CL
**
PROPERTIES
ASTM
Material Name
Description
RCL-ENTD75
RCL-ENTD70
RCL-ENTD65
RCL-ENTD60
RCL-ENTD55
RCL-ENTA90
RCL-ENTA80
RCL-ENTA70
RCL-ENTA60
RCL-ENTA50
RCL-ENTA40
Very
rigid
Slightly
rigid
Rigid
Rigid
Slightly
rigid
Slightly
flexible
Slightly
flexible
Flexible
Flexible
More
flexible
Very flexible
Light
clear tan
Light
clear tan
Medium
clear tan
Medium
clear tan
Medium
clear tan
Very clear
Light
Light
white
clear white clear white
Appearance*
Translucent Translucent
tan
amber
Translucent
amber
Tensile Strength (MPa)
D638
19-27
12-16
8-10
4-5
2-3
1.4-1.9
1.3-1.7
.75-1.1
.48-.77
.35-.48
.23-.32
Flexural Strength (MPa)
D790
18-21
12-13
7-7.4
3.9-4.2
1.6-1.9
N/A
N/A
N/A
N/A
N/A
N/A
Flexural Modulus (MPa)
D790
450-750
350-550
150-250
70-180
30-80
N/A
N/A
N/A
N/A
N/A
N/A
Impact Strength (J/m)
(Notched Izod)
D256
18-25
22-30
32-52
29-42
74-114
N/A
N/A
N/A
N/A
N/A
N/A
D2240
N/A
N/A
N/A
N/A
N/A
86-92
75-85
65-75
55-65
45-55
35-45
70-80
65-75
60-70
55-65
50-60
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
44-62
25-32
18-23
11-17
6.6-9.3
6.5-8.5
Shore A Hardness, Scale A
Shore D Hardness, Scale D D2240
Tear Resistance (kN/m)
*
MULTI-MATERIAL COMPOSITES (VisiJet CR-CL 200** + VisiJet CE-NT)
D624
Visual approximation. No guarantee that part output will match exactly to software or datasheet values.
Respectively replaces former VisiJet® CR-WT and VisiJet® CR-CL
**
VisiJet® Composite Combinations
PROPERTIES
Continued
MULTI-MATERIAL COMPOSITES (VisiJet CE-BK + VisiJet CE-NT)
Material Name
EBK-ENT-R89
EBK-ENT-R78
EBK-ENT-R64
EBK-ENT-R50
EBK-ENT-R36
EBK-ENT-R22
EBK-ENT-R11
Description
Very flexible
Very flexible
Very flexible
Very flexible
Very flexible
Very flexible
Very flexible
Appearance*
Translucent
dark brown
Translucent
brown
Translucent
brown
Light
brown
Light
brown
Light
amber
Light
amber
Mechanical Properties
Similar properties to VisiJet CE-NT or VisiJet CE-BK base materials
Visual approximation. No guarantee that part output will match exactly to software or datasheet values.
*
PROPERTIES
Material Name
Description
Appearance*
Mechanical Properties
MULTI-MATERIAL COMPOSITES (VisiJet CR-WT 200** + VisiJet CR-CL 200**)
RWT-RCL-R89
RWT-RCL-R78
RWT-RCL-R64
RWT-RCL-R50
RWT-RCL-R36
RWT-RCL-R22
RWT-RCL-R11
Rigid
Rigid
Rigid
Rigid
Rigid
Rigid
Rigid
Translucent
white
Translucent
white
Translucent
white-clear
Translucent
white-clear
Translucent
white-clear
Light
white-clear
Light
clear
Similar properties to VisiJet CR-WT 200 or VisiJet CR-CL 200 base materials
Visual approximation. No guarantee that part output will match exactly to software or datasheet values.
Respectively replaces former VisiJet® CR-WT and VisiJet® CR-CL
*
**
PROPERTIES
Material Name
Description
Appearance*
Mechanical Properties
MULTI-MATERIAL COMPOSITES (VisiJet CR-BK + VisiJet CR-CL 200**)
RBK-RCL-L10
RBK-RCL-L20
RBK-RCL-L30
RBK-RCL-L40
RBK-RCL-L50
RBK-RCL-L60
RBK-RCL-L70
Rigid
Rigid
Rigid
Rigid
Rigid
Rigid
Rigid
Translucent
black
Translucent
black
Translucent
dark clear
Translucent
dark clear
Translucent
clear
Translucent
clear
Translucent
clear
Similar properties to VisiJet CR-BK or VisiJet CR-CL 200 base materials
Visual approximation. No guarantee that part output will match exactly to software or datasheet values.
Respectively replaces former VisiJet® CR-WT and VisiJet® CR-CL
*
**
PROPERTIES
Material Name
Description
Appearance*
Mechanical Properties
MULTI-MATERIAL COMPOSITES (VisiJet CR-BK + VisiJet CR-WT 200**)
RBK-RWT-L10
RBK-RWT-L20
RBK-RWT-L30
RBK-RWT-L40
RBK-RWT-L50
RBK-RWT-L60
RBK-RWT-L70
Rigid
Rigid
Rigid
Rigid
Rigid
Rigid
Rigid
Darker grey
Medium dark grey
Grey
Medium light grey
Light grey
Lighter grey
Very light grey
Similar properties to VisiJet CR-BK or VisiJet CR-WT 200 base materials
Visual approximation. No guarantee that part output will match exactly to software or datasheet values.
Respectively replaces former VisiJet® CR-WT and VisiJet® CR-CL
*
**
www.3dsystems.com
Warranty/Disclaimer: The performance characteristics of these products may vary
according to product application, operating conditions, material combined with, or with
end use. 3D Systems makes no warranties of any type, express or implied, including,
but not limited to, the warranties of merchantability or fitness for a particular use.
© 2017 by 3D Systems, Inc. All rights reserved. Specifications subject to change without
notice. 3D Systems, ProJet and VisiJet are registered trademarks and the 3D Systems
logo and 3D Sprint are trademarks of 3D Systems, Inc.
11-17