A compact and versatile package

EH415ST
A compact and
versatile package
Optoma EH415ST Projector offers all the features you need
in limited spaces, including 3500 ANSI lumens of brightness, 15,000:1
contrast ratio, 90” view within a meter. Full support for Crestron
Roomview, Telnet, Extron, AMX and PJ-Link, allow almost all
aspects of the EH415ST to be controlled across a network, keeping
you in control wherever you are. Also, the environmentally friendly
EH415ST has energy saving features including Eco+ lamp power
management, <0.5W standby mode and auto power off, saving
you both time and money.
EH415ST
Short Throw Lens
System Integration Control
Project an impressive 90” diagonal image from less than 1 meter away.
Stand alone or wall mounted the EH415ST eliminates shadows on the
screen and allows you to present with ease.
Using Crestron Roomview, multiple EH415ST can be monitored over LAN and
also provide the user with an email message alert in case an error occurs or a
lamp fails. The web browser interface and full support for Extron’s IP Link,
AMX dynamic device discovery and PJ-Link protocols, allow almost all
aspects of the EH415ST to be controlled across a network, reducing
installation costs and keeping you in control wherever you are. While RS-232
connectivity ensures legacy support for existing control systems.
3D Technology
Using the inherent speed of DLP® technology, Optoma Full 3D projectors
can output video and images at an astonishing rate of 120Hz, allowing you
to show full screen, full colour, stereoscopic 3D. The 3D effect is generated
by splitting this signal into two standard video streams, one for each eye.
Using DLP® Link™ technology, the 3D glasses synchronise with the image
on screen to filter each stream to the correct eye. Your brain then combines
the two streams to make them jump into life. The EH415ST supports
multiple 3D formats from various devices such as PC, Blu-ray 3D™, Sony®
PS3, Microsoft® Xbox 360 or 3D TV broadcast systems.
DICOM Sim. Display Mode
DICOM is the international standard for medical images and related
information for doctors and for patients. The EH415ST offers DICOM Sim.
Display Mode*, specifically tuned for viewing greyscale images and details
of the images, perfect for viewing X-rays and scans during medical training
program or discussion.
Easy Lamp Replacement
In applications requiring smooth continuous operation, minimizing service
time is essential. The EH415ST lamp can quickly be replaced without the need
to remove the projector from where it is installed.
Input/Output Connections
01.USB Power
05.HDMI 1
09.VIDEO
13.AUDIO2-IN
02.VGA-IN
06.RJ45
10.12V RELAY OUT
14.Kensington Lock
01
02
* for medical training or dicussion only
03.VGA-OUT
07.USB(Service)
11.AUDIO OUT
03
04
07
05
04.HDMI 2
08.RS-232C
12.AUDIO1-IN
06
08
09
14
10
11
without
DICOM Sim. display mode
12
13
with
DICOM Sim. display mode
Specification
EH415ST
Display Technology
Texas Instruments DLP® technology / 1080P DMD Chip
Native Resolution
Native: 1920 x 1080 (1080P) Support Computer signal up to WUXGA/60Hz
Brightness / Contrast Ratio
3500 ANSI Lumens / 15,000 :1
Display Colors
1073.4 million colors (10bit)
Image Size
30~300 inch
Throw Ratio (Projection distance/width)
0.5 :1 (Projection distance/width) Fixed Lens
Digital Keystone Correction
± 20° Vertical
Aspect Ratio
16:9 Native, 16:10/4:3 Compatible
Scan Rate
Horizontal : 15,31 ~ 90 kHz / Vertical : 50 ~85 Hz
Computer Compatibility
WUGXA, UXGA, SXGA+,SXGA, SVGA, XGA, VGA Compression, VESA standards, PC & Macintosh compatible
Video Compatibility
Full NTSC, PAL PAL-M, PAL-N, SECAM
Input / Output Connections
HDMI x2, VGA(YPbPr/ RGB) x1, VGA Out x1, Composite Video x1, +12V Relay output x1, USB Power,
Audio in x1(Mini-Jack), Audio in x1(RCA), Audio Out x1(Mini-Jack), RS232 Control x1, RJ45 Controlx1, USB (service) x1
Uniformity
85 %
Speaker
10W
Noise
37 dB (ECO mode)
Lamp Life
7000 hrs (DB = On) / 4000 hrs (ECO mode) / 3000 hrs (Bright mode)
Power Supply
Universal AC 100 ~ 240V, 50/60Hz @110VAC
Dimensions (WxDxH) / Weight
286 x 266 x 124 mm / 3.4kg
*Optoma reserves the right to change this brochure without prior notice, please refer to www.optoma.com for any change
*Optoma guarantees that in normal use,Optoma DLP® color quality will be indistinguishable from when new. Please note that worn lamps will give slight variance. Exclusions: (1) Guarantee is voided if the projector
is subject to damage through mis-use. (2) Guarantee may be void in industrial or commercial entertainment environments where dust or smoke is particularly excessive (3) Guarantee will not apply if lamp brightness
is below 50% due to wear or if the projector is not working due to other fault. Typical lamp life achieved through testing. Will vary according to operational use and environment conditions. Optoma guarantees that
in normal use, the DLP® imager guarantee will retain quality for at least 5 years providing consistent pixel performance. Exclusions: (1) Guarantee is voided if the projector is subject to damage through mis-use. (2)
Guarantee may be void in industrial or commercial entertainment environments where dust or smoke is particularly excessive. Copyright © 2015, Optoma Corporation. All other product names and company names
used herein are for identifications purposes only and may be trademarks or registered trademarks of their respective owners. Errors and omissions excepted, all specifications are subject to change without notice.
DLP®, BrilliantColor™ and the DLP logo are registered trademarks of Texas Instruments.
Download PDF
Similar pages