SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
Table of Contents
Usage Notice
Precautions ........................................................................................................ 2
Introduction
Product Features ............................................................................................... 4
Package Overview ............................................................................................. 5
Product Overview ............................................................................................... 6
Main Unit ...................................................................................................... 6
Control Panel ............................................................................................... 7
Connection Ports ......................................................................................... 8
IR Remote Control ....................................................................................... 9
Installation
Connecting the Projector ................................................................................... 10
Powering On/Off the Projector ........................................................................... 11
Powering On the Projector ........................................................................... 11
Powering Off the Projector ........................................................................... 12
Adjusting the Projected Image .......................................................................... 13
Adjusting the Projector’s Height .................................................................. 13
Adjusting the Projector’s Zoom/Focus ......................................................... 14
User Controls
Control Panel & Remote Control ....................................................................... 15
Onscreen Display Menus ................................................................................. 18
How to Operate ............................................................................................ 18
Menu Tree .................................................................................................... 19
Picture .......................................................................................................... 20
Image ........................................................................................................... 22
System ......................................................................................................... 24
Display ......................................................................................................... 25
Appendices
Troubleshooting ................................................................................................. 27
Replacing the Lamp .......................................................................................... 30
1
English
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
Usage Notice
Precautions
Please follow all warnings, precautions, and maintenance
procedures as recommended in this user’s guide.
Warning- Do not look into the lens. The bright light may cause
eye injury.
Warning- To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture.
Warning- To prevent the risk of electric shock, do not open or
disassemble the product.
Warning- Please allow the unit to cool down before changing the
lamp; carefully follow the lamp replacement instructions listed under “ Replacing the lamp.”
Warning- This product self-detects the life cycle of the lamp and
will display a warning message when the lamp is
about to expire. Be sure to replace the lamp when it
disaplays warning messages.
Warning- After installing a new lamp, reset the lamp life using
the onscreen menu.
Warning- Before turning off the product, follow the cooling fan
to run for several minutes.
Warning- Turn on the projector first and then select the signal
sources.
Warning- When the lamp reaches the end of its life, it will burn
out and may make a loud “popping” sound. If this
occurs, the projector will not turn back on until the
lamp module has been replaced. To replace the lamp,
follow the procedures listed under “Replacing the
Lamp.”
2
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
Usage Notice
Do:
Turn off the product before cleaning.
Use a soft cloth moistened with mild detergent to clean the
display housing.
Disconnect the power plug from AC outlet if the product is not
being used for a long period of time.
Do not:
Block the slots and openings on the unit provided for
ventilation.
Place in direct sunlight.
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
- Extremely heat, cold or humidity.
- In areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
3
English
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
Introduction
Product Features
This product is a WXGA single chip 0.79-inch DLPTM
projector featuring:
True WXGA resolution 1280 x 720 addressable pixels
17-pounds (7.72 kgs) compact design
Single chip DLPTM technology
Power zoom and focus
HDTV compatible (480i/p, 576i/p, 720p, 1080i )
NTSC/PAL/SECAM, and HDTV compatible
Hi-tech DVI-I connection for digital and analog video
connectivity
IR remote control
User-friendly multilingual onscreen display menu
Advanced electronic keystone correction
User-friendly control panel
SXGA compression
250-watt replaceable UHP lamp
Vertical lens shift
HDCP compliant
4
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
Introduction
Package Overview
This projector comes with all the items shown below. Check to
make sure your unit is complete.
Projector Unit
Power Cord
User’s Manual/
Warranty Card
Battery x 2
Due to the difference in applications
for each country,
some regions may
have different
accessories.
5
IR Remote Control
S-Video Cable
English
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
Introduction
Product Overview
Main Unit
1
2
4
3
5
6
1.
2.
3.
4.
5.
6.
Control Panel
Power Socket & Power Switch
Height Adjustment Foot
Lens
IR Receiver
Connection Ports
6
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
Introduction
Control Panel
1
2
3
1. Lens Shift (Up/Down)
2. Zoom/Focus Shift
-Zoom: Up/Down
-Focus: Right/Left
3. Key Pad
- Resync
- Source
- Menu/Exit
- Enter
7
English
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
Introduction
Connection Ports
4
1
11
5
10
6
7
2
1
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
8
3
Lamp/Temp & Power LEDS
Power Socket
Power Switch
IR Receiver
Component Connector
BNC Connector
+12V Relay Connectors
RS-232 Connector
S-Video Input Connector
Composite Video Input Connector
DVI-I Input Connector
8
9
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
Introduction
Wireless Remote Control
Power On/Off
Display Hide
Brightness
Freeze
Contrast
Re-sync
Zoom
Keystone Adjustment
Menu/Exit
Hue Adjustment
Format
Optics Zoom
Four Directional
Select Keys
Optics Focus
Enter
Composite Source
S-Video Source
Component Source
(YPbPr)
BNC Source
DVI-I Source
9
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
Installation
Connecting the Projector
DVI-I Output
Video Output
5
1
2
DVD Player
3
Antenna
Digital Tuner Output
RS-232
1. Power Cord
2. RCA Component Cable for
YPbPr
3. BNC Cable for RGB/Component
4. S-Video Cable
5. Composite Video Cable
+12V Relay Outputs
4
S-Video Output
To ensure that the projector properly displays source material from your
computer, please configure the display settings of your graphics card to less
than or equal to 1280 x 720 resolution. Be sure that the timing of the display
setting is compatible with the projector.
10
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
Installation
Powering On/Off the Projector
Powering On the Projector
1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely
connected.
3. Turn on the main power switch on the side of the projector.
4. Turn on the lamp by pressing the “Power” button on the side
of the projector. The startup screen will display in approximately one minute.
5. Turn on your source (computer, notebook, video player etc),
the projector will automatically detect your source.
If the screen displays “No Signal,” make sure the signal cables are
securely connected.
If you connect multiple sources at the same time, use the “Source”
button on the remote control or control panel to select your desired
source.
Turn on the
projector first and
the signal sources
next.
3
Power Button
I
O
1
2
Lens Cap
Power Switch
11
English
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
Installation
Powering Off the Projector
1. Press the “Power” button to turn off the projector lamp.
2. After pressing the “Power” button, you will see the message
“Power off the lamp? Video Mute” displayed on the
projector’s screen. Press the “Power” button again to confirm,
otherwise the message will disappear after five seconds.
key is pressed instead, the projector
Please note that if the
will enter the “Video Mute” mode and no image will be
displayed. To exit the “Video Mute” mode, press the “Power”
button again.
3. The “Power” LED indicator will flash for about 120 seconds
while the lamp cools. After the “Power” indicator stops
flashing, you may then turn off the main power switch on the
side of the projector. If you want to turn on the projector, you
must press “Power” within 90 seconds of when the “Power”
indicator light begins to flash.
4. Do not restart the projector immediately following a power
off procedure.
Note: If the “TEMP” indicator flashes orange for approximately
ten seconds, the projector will display “Fan Fail. ” Please contact
your local reseller or service center.
Note: If the “TEMP” indicator illuminates orange, the projector has
overheated. The projector will display “Over Temperature.” The
projector will then automatically shut down. Under normal
conditions, the projector may be restart. However, if the problem
persists, you should contact your local reseller or service center.
Note: If the “LAMP” indicator illuminates red, the lamp may of
failed. Please contact your local reseller or service center.
12
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
Installation
Adjusting the Projected Image
Adjusting the Projector’s Height
The projector is equipped with four adjustable feet to modify
the height of the projector.
To raise or lower the projector :
1. Locate the adjustable foot you wish to modify on the under
side of the projector.
2. Rotate the foot counterclockwise to raise the projector or
clockwise to lower it. Repeat with the remaining feet as
needed.
3. Reset the projector on its feet and re-adjust as needed.
Adjustable foot
13
English
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
Installation
Adjusting the Projector’s Zoom/Focus
You may adjust the Zoom shift to zoom the lens in or out. Press
to zoom in or
to zoom out. To adjust focus of an image, press the
focus shift buttons
and . The projector will focus at distances
from 3.28 to 32.80 feet (1.19 to 10m).
Zoom/
Focus Shift
14
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
User Controls
Control Panel & Remote Control
There are two ways for you to control the functions: with
control panel and remote control.
Control Panel
Remote Control
Using the Remote Control
Power
4 “Power” turns on the projector’s lamp, refer to the “Powering
On/Off the Projector” section on page 11~ 12 for more details.
Hide
4 “Hide” immediately turns the screen black. Press “Hide” a
second time to restore the display.
Brightness
4 Adjust the brightness of the image.
Freeze
4 Press “Freeze” to pause the screen image.
15
English
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
User Controls
Contrast
4 “Contrast” controls the degree of difference between the
lightest and darkest parts of the picture.
Hue
4 “Hue” adjusts the color balance from red to green.
H.Keystone & V.Keystone
4 Correct image distortion caused by rotating and tilting the
projector.
Re-Sync
4 Automatically synchronizes the projector to the input source.
Zoom
4 Press “Zoom” to display the zoom menu.
Press
or
button to zoom in or zoom out of an image.
Focus
4 Press “Focus” to display the focus menu, then use
or
to
focus in or out of an image.
Format
4 Display the “Format” section of the onscreen display menu
to select the desired aspect ratio.
Menu/Exit
4 Display or exits the onscreen display menu.
Four Directional Select Keys
to zoom the lens in or out.
4 Use
Use
to
focus the image.
4
Or
Press
“Menu/Exit”
then use
4
to select items
or make adjustments to your selection.
Enter
4 Confirm your item selection.
S-Video
4 Press “S-Video” to choose S-Video source.
Composite
4 Press “Composite” to choose video source.
BNC
4 Press “BNC” to choose Analog RGB or YPbPr video
from the BNC input.
16
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
User Controls
DVI
4 Press “DVI” to select input from the DVI-I connector
RCA
4 Press “RCA” to select input from the RCA component video
connector.
Using the Control Panel
Power
4 The power switch is located near the power socket on the side
of the projector. Use it to power on/off the projector. Please
refer to the “Powering On/Off the Projector” section on pages
11~ 12.
Lens Shift
4 Turn the Lens Shift dial clockwise to shift the projected
image in an up ward direction. Turn the Lens Shift dial counter
clockwise to shift the projected image in a down ward
direction.
Zoom/Focus
4 Press
or
to zoom in or out.
4 Press or to focus the image.
4 Press “Menu/Exit,” then use
to
select items or make adjustments to your selection.
Re-Sync
4 Automatically synchronizes the projector to the input source.
Source
4 Press “Source” to choose RGB, DVI-Digital, DVI-Analog,
S-Video, Composite, Component, and HDTV sources.
Menu/Exit
4 Display or exit the the onscreen display menus.
Enter
4 Confirm your selection.
17
English
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
User Controls
Onscreen Display Menus
How to Operate
4 The projector has multilingual onscreen display menus that allow
you to make image adjustments and change a variety of settings.
The projector automatically detects the source.
4 To launch the menu, press “Menu/Exit” on the Remote Control or
Control Panel.
4 When the main menu is displayed, use
to select it.
While making a selection, press “Enter” to go into the sub-menu.
To exit the menu, press “Menu/Exit”.
4 When a sub-menu is displayed, use
item and adjust the settings with
to select the desired
.
To exit the sub-menu, press “Menu/Exit.”
4 After using
to make selections to the sub-menu, press
“Enter” to confirm your changes and return to the the main menu.
Press “Menu/Exit” to return to the main menu. If you don’t
press “Enter” to confirm your changes and exit the menu, the
items will not to be modified.
Item
Main menu
Sub-menu
18
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
User Controls
Menu Tree
PICTURE............... Mode
Cinema/Normal/Vivid
Contrast
Brightness
Color (Video only)
Tint (Video only)
Sharpness
Gamma
Current/All
Reset
1/2/3
IMAGE................... White Peaking
Film/Video/TV
Color Temp
R Contrast/G Contrast/B Contrast/R
Image Mode
Brightness/G Brightness/
Advanced Adjustment
B Brightness
Signal
Horizontal/Vertical/Frequency/
Phase
Reset
Current/All
English/French/Japanese/Spanish/
Chinese(Simplified)(Traditional)/
Italian/Portugese/Deutsch/Korean
SYSTEM................. Language
Lamp Hour/Lamp Reminding/Lamp
Bulb
Hour Reset
Source Lock
On/Off
Auto Shutdown
On/Off
Blanking
Blue/Black
Eco Mode
On/Off
Projection
Front Desktop/Front Ceiling/Rear
DISPLAY............... Format
Desktop/Rear Ceiling
V.Keystone
16:9=>Native/Window/16:9/Letter
H.Keystone
Box
Digital Zoom
-50~+50
+1~32
19
English
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
User Controls
PICTURE
Mode
There are three factory presets optimized for various types of
pictures: Cinema, Normal, and Vivid. You can customize contrast,
brightness, intensity, color, tint, sharpness, and gamma for each
preset mode.
Contrast
Contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white with an image.
4 Press to decrease the contrast.
4 Press to increase the contrast.
Brightness
Adjust the brightness of the image.
4 Press
4 Press
Color
to darken an image.
to lighten an image.
Adjust a video image from black and white to fully saturated
color.
The “Color” sub
menu is not
supported under
the digital RGB
input source.
The “Tint” sub
menu is not
supported under
the digital RGB,
component video
or analog RGB
input sources.
4 Press
4 Press
Tint
to decrease the amount of color in an image.
to increase the amount of color in an image.
Adjust the color balance of red and green.
4 Press to increase the amount of green in an image.
4 Press to increase the amount of red in an image.
Sharpness
Adjust the sharpness of an image.
4 Press
4 Press
to decrease the sharpness.
to increase the sharpness.
20
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
User Controls
PICTURE
Gamma
Gamma affects how dark scenery is displayed. With a greater
gamma value, dark scenery will appear brighter. Use
to
adjust gamma values.
Reset
Return the adjustments and settings to factory default values.
4Current: Returns the current menu’s settings to factory default
values.
4All: Returns the settings for all menus to factory default values.
21
English
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
User Controls
IMAGE
White Peaking
Use the white segment control to set the white peaking level of
the DMD chip. “0” stands for minimal peaking, and “10” stands
for maximum peaking. If you prefer a stronger image, adjust
toward the maximum setting. For a smoother, more natural
image, adjust toward the minimum setting.
Color Temp
Adjust the color temperature. The range is from “1” to “3.” At a
higher temperature, the screen looks colder; at a lower
temperature, the screen looks warmer.
Image Mode
There are three factory presets optimized for various types of
images:
4 Film : For home theater
4 Video : For video mode
4 TV : For TV
Advanced Adjustment
Use
or
to select R (Red), G (Green), or B (Blue) for brightness
and contrast.
Signal
The “Signal” sub
menu is supported
under the Analog
RGB and Analog
YPbPr input
sources.
4Horizontal: Adjusts the horizontal position.
4Vertical: Adjusts the vertical position.
4Frequency: Changes the display data frequency to match the
frequency of your computer’s graphic card. When you experience a vertical flickering bar, use this function to make an
adjustment.
4Phase : Synchronizes the signal timing of the display with the
graphics card. If you experience an unstable or flickering image,
use this function to correct it.
22
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
User Controls
IMAGE
Reset
Return the adjustments and settings to factory default values.
The“Deinterlacing”
sub menu is
supported under the
S-video, composite
video, and component video input
sources.
4Current: Return the current menu’s settings to factory
default values.
4All: Return all menu settings to factory default values.
23
English
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
User Controls
SYSTEM
Language
Display a multilingual menu. Use
preferred language.
and
to select your
Bulb
4 Lamp Hour: Display the cumulative lamp operating time.
4 Lamp Reminding: Select this function to show or hide the
warning message when the lamp replacing reminder message
is displayed. The message will show up when the lamp reaches
1,500 hours at normal mode.
4 Lamp Hour Reset: Reset the lamp life hour after replacing a
new lamp.
Source Lock
When source lock is turned off, the projector will search for other
signals if the current input signal is lost. When source lock is
turned on, it willl continue to search for the “lost signal” after
“Source “ is pressed.
Auto Shutdown
Determine the time interval to shutdown the system if there is no
signal input. Select “On” in the Auto Shutdown menu to turn the
projector off automatically.
Blanking
Use this feature to display a black or blue screen when there is no
signal is available.
Eco Mode
This is also known as “Economy Mode.” Selecting “On” decreases
the fan noise from the projector as well as increasing the contrast
ratio and reducing the brightness. You may find this is the best
mode for watching movies.
24
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
User Controls
DISPLAY
Projection
4
Front-Desktop
The factory default setting.
4
Rear-Desktop
When you select this function, the projector reverses the image
so you can project from behind a translucent screen.
4
Front-Ceiling
When you select this function, the projector turns the image
upside down for ceiling-mounted projection.
4
Rear-Ceiling
When you select this function, the projector reverses and inverts the image at same time. Using this setting enables you
to project from behind a translucent screen with ceiling
mounted projection.
25
English
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
User Controls
DISPLAY
Format
4Native: Original image size.
416:9: The standard widescreen display format of the projector
4Letterbox: Letterbox mode zooms a letterboxed image intended
for 4:3 display to full screen wide.
Original
The letterbox
4Window: When a 4:3 image is bigger than a 16:9 screen, select
the “Window” mode to fit the image onto the screen without
changing the projection distance.
Original
Window
V. Keystone
Correct image distortion caused by tilting the projector vertically.
H. Keystone
Correct image distortion caused by rotating the projector
horizontally.
Digital Zoom
Provide different magnification ratios to zoom an image. Images
will be centered after zooming.
26
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
Appendices
Troubleshooting
If you experience a problem with your projector, please
refer to the following information. If a problem persists,
please contact your local reseller or service center.
Problem: No image appears on screen.
4 Ensure that all the cables and power cord are correctly and
securely connected as described in the “Installation” section.
4 Ensure that connector pins are not bent or broken.
4 Make sure that the projection lamp has been securely installed.
Please refer to the “Replacing the lamp” section.
4 Ensure that you have removed the lens cap and that the projector
is turned on.
4 Ensure that the “Hide” feature is not enabled.
Problem: Partial, scrolling, or incorrectly displayed images.
4 Press “Re-Sync” on the remote control or control panel.
4 If using a PC:
For Windows 3.x:
1. In the Windows Program Manager, double click the “Windows
Setup” icon in the Main group.
2. Verify that your display resolution setting is less than or equal
to 1280 x 720.
For Windows 95, 98, 2K, XP:
1. Open the “My Computer” icon. Next, open the “Control Panel”
folder, and double click the “Display” icon.
2. Select the “Settings” tab.
3. (Above in “Windows 3.x). Click on the “Advanced Properties”
button. Verify that your display resolution setting is less than
or equal to 1280x720.
If the projector is still not projecting the image, you may need to
adjust your monitor display setting. To do this, please refer to the
following instructions.
27
English
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
Appendices
4. Verify the resolution is less than or equal to 1024 x 768.
5. Select the “Change” button under the “Monitor” tab .
6. Click on “Show all devices. ” Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
7. Verify that the resolution setting of the monitor display is less
than or equal to 1280 x 1024.
4 If using a Notebook PC:
1. First, follow the steps above to adjust resolution of the
computer.
2. Switch the Notebook PC display to the “external display only”
or “CRT only” mode.
4 If you experience difficulty changing resolutions or your
monitor freezes, restart all the equipment including the projector.
Problem: The screen of the Notebook or PowerBook computer
is not displaying your presentation.
4 If using a Notebook PC:
Some Notebook PCs may deactivate their own screens when a
second display device is in use. Each has a different way of
reactivating. Refer to your computer’s documentation for
detailed information.
Problem: Image is unstable or flickering
4 Use “Phase” to correct it. See page 22 for more information.
4 Change the monitor color setting on your computer.
Problem: Image has a vertical flickering bar
4 Use “Frequency” to make an adjustment. See page 22 for more
information.
4 Check and reconfigure the display mode of your graphics card to
ensure compatibility.
.
28
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
English
Appendices
Problem: Image is out of focus
4 Adjust the focus using the remote control.
Problem: Image is reversed.
4 Press “Menu,” then select “Display” to adjust the projection
setting.
Problem: Lamp burns out or makes a popping sound
4 If the lamp makes a loud popping sound, it has most likely
expired. The projector will not turn on until the lamp module has
been replaced. To replace the lamp, follow the procedure in the
“Replacing the Lamp” section on page 30.
29
English
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
Appendices
Replacing the Lamp
The projector displays a warning message “Lamp may fail soon !
Replacement Suggested !” When you see this message, please
contact your local reseller or service center.
Make sure the projector has cooled down for at least 30 minutes
before changing the lamp.
Warning:
Lamp compartment is
hot! Allow it to cool
down before changing
lamp!
3
2
1
Lamp Replacing Procedure:
Warning: To
reduce the risk of
personal injury, avoid
dropping the lamp
module or touching
the lamp bulb. If
dropped, the bulb
may shatter and cause
injury.
Turn off the power to the lamp by pressing the power button.
Allow the projector to cool down at least 30 minutes.
Turn off the main power switch.
Disconnect the power cord.
Use screw driver to remove the screw on the side of projector
as indicated above .
6. Remove the cover.
1.
2.
3.
4.
5.
7. Remove the lamp module.
To replace the lamp module, reverse the above mentioned steps.
30
Download PDF
Similar pages