Always there to help you
Register your product and get support at
www.philips.com/support
Question?
Contact
Philips
User manual
MCM2350
Contents
1Important
2
Safety2
Notice2
2 Your Micro Music System
4
Introduction4
What's in the box
4
Overview of the main unit
5
Overview of the remote control
6
3 Get started
Connect speakers
Connect power
Prepare the remote control
Demonstrate the features
Power on
Set the clock
Select a source
7
10
5 Listen to the radio
12
6 Adjust sound
13
Tune to a radio station
Program radio stations automatically
Program radio stations manually
Select a preset radio station
Select a preset sound effect
Adjust volume level
Mute sound
14
8 Product information
16
9Troubleshooting
18
Set the alarm timer
Set the sleep timer
Listen to an external device
14
14
14
Specifications
USB playability information
Supported MP3 disc formats
16
17
17
7
7
7
8
8
8
9
4Play
Play from disc
Play from USB
Control play
Skip tracks
Program tracks
7 Other features
10
10
10
11
11
12
12
12
12
13
13
13
EN
1
1Important
Safety
Warning
Safety
Read and understand all instructions before
you use this micro music system. If damage is
caused by failure to follow the instructions, the
warranty does not apply.
•• Never remove the casing of this apparatus.
•• Never lubricate any part of this apparatus.
•• Never look into the laser beam inside this apparatus.
•• Never place this apparatus on other electrical
equipment.
•• Keep this apparatus away from direct sunlight, naked
flames or heat.
•• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.
•
•
•
This 'bolt of lightning' indicates uninsulated
material within the device may cause an
electrical shock. For the safety of everyone in
your household, please do not remove the
covering.
The 'exclamation mark' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WARNING: To reduce the risk of fire or electric
shock, the device should not be exposed to rain
or moisture and objects filled with liquids, such
as vases, should not be placed on the device.
CAUTION: To prevent electric shock, fully
insert the plug. (For regions with polarized
plugs: To prevent electric shock, match wide
blade to wide slot.)
•
•
•
The device shall not exposed to dripping
or splashing.
Do no place any source of danger on the
device (e.g. liquid filled objects. lit candles).
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Make sure that there is enough free space
around the product for ventilation.
Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
• Install all batteries correctly, + and - as
marked on the unit.
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Batteries (packed or installed) shall not
be exposed to excessive heat such as
sunshine, fire or the like.
• Remove batteries when the unit is not
used for a long time.
Only use attachments/accessories specified
by the manufacturer.
Notice
Any changes or modifications made to this
device that are not expressly approved by
Gibson Innovations may void the user’s
authority to operate the equipment.
2
EN
Compliance
Hereby, Gibson Innovations declares that this
product is in compliance with the essential
requirements and other relevant provisions
of Directive 2014/53/EU. You can find the
Declaration of Conformity on www.philips.com/
support.
This apparatus includes this label:
Care of the environment
negative consequences for the environment and
human health.
Removing the disposable batteries
To remove the disposable batteries, see battery
installation section.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Disposal of your old product and battery
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This symbol on a product means that the
product is covered by European Directive
2012/19/EU.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Care for your product
•
•
•
This symbol means that the product contains
batteries covered by European Directive
2013/56/EU which cannot be disposed of with
normal household waste.
Inform yourself about the local separate
collection system for electrical and electronic
products and batteries. Follow local rules and
never dispose of the product and batteries
with normal household waste. Correct disposal
of old products and batteries helps prevent
•
Do not insert any objects other than discs
into the disc compartment.
Do not insert warped or cracked discs into
the disc compartment.
Remove the discs from the disc
compartment if you are not using the
product for an extended period of time.
Only use microfiber cloth to clean the
product.
Note
•• The type plate is located on the back of the product.
EN
3
2 Your Micro
Music System
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can:
• enjoy audio from discs, USB devices, and
other external devices;
• listen to radio stations.
You can enrich sound output with below
sound effect:
• Digital Sound Control (DSC)
The unit supports these media formats:
What's in the box
Check and identify the contents of your
package:
• Main unit
• Remote control (with one AAA battery)
• Speaker boxes (×2)
• Short user manual
• Safety and notice
4
EN
Overview of the main unit
ab c
kj
a
d ef
i h g
• Turn on the product.
• Switch to standby mode or ECO
power standby mode.
b AUDIO IN
• Connect external audio devices.
c Display panel
• Show current status.
d
e
•
•
•
•
/
Skip to previous/next track.
Search within a track/disc.
Tune to a radio station.
Adjust time.
l
m
n
j SOURCE
• Select a source: DISC, USB, TUNER,
AUDIO IN.
k
• Connect USB storage devices.
l SPEAKER OUT socket
• Connect with the speakers.
m FM ANT
• Improve FM reception.
n AC MAINS ~
• Start or pause play.
f VOLUME knob
• Adjust volume.
g
h
• Open or close the disc compartment.
• Stop play.
• Erase a program.
i Disc compartment
EN
5
• Search within a track/disc/USB.
• Tune to a radio station.
• Adjust time.
Overview of the remote
control
e
a
b
r
c
q
p
d
o
n
e
m
l
f
g
h
• Play tracks randomly.
f ALBUM/PRESET /
• Select a preset radio station.
• Skip to previous/next album.
g DISPLAY
• Adjust display brightness.
• During playback, display the play
information.
h SLEEP/TIMER
• Set sleep timer.
• Set alarm timer.
i CLOCK
• Set the clock.
• View clock information.
k
j PROG
• Program tracks.
• Program radio stations.
• Auto store FM radio stations.
j
k
i
• Mute or unmute the sound.
l SOUND
• Enrich sound effect with Digital Sound
Control (DSC).
m VOL +/• Adjust volume.
n
a
• Turn the unit on or off.
• Switch to standby mode or ECO
power standby mode.
b CD
• Select CD source.
c USB
• Select USB source.
d
/
• Skip to the previous/next track.
6
EN
o
p
• Play a track or all tracks repeatedly.
• Stop play or erase a program.
• Start, pause, or resume play.
q FM
• Select FM source.
r AUDIO IN
• Select AUDIO IN source.
3 Get started
Caution
•• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Connect power
Caution
•• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•• Before you connect the AC power cord, ensure that
you have completed all other connections.
Always follow the instructions in this chapter in
sequence.
Connect speakers
Note
•• Insert the stripped portion of each speaker wire into
the socket completely.
•• For better sound quality, use the supplied speakers only.
1
2
3
4
For the right speaker, find the sockets on
the back of the main unit marked "R".
Insert the red wire into the red (+) socket,
and the black wire into the black (-) socket.
For the left speaker, find the sockets on the
main unit marked "L".
Repeat step 2 to insert the left speaker
wire.
To insert each speaker wire:
1
2
3
Hold down the socket flap.
Insert the speaker wire fully.
Release the socket flap.
Connect the power cable to the wall socket.
Prepare the remote control
Caution
•• Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
To insert the remote control battery:
1
2
3
Open the battery compartment.
Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
Close the battery compartment.
EN
7
Demonstrate the features
In standby mode, press to demonstrate
features of this device.
»» The features are displayed one by one
across the display panel.
• To turn off the demonstration, press
again.
Power on
Note
•• The product switches to ECO power standby mode
after 15 minutes in standby mode.
Switch between standby mode and ECO
powerstandby mode:
• Press and hold for more than two
seconds.
Note
•• If no button is pressed over 15 minutes in standby
mode, this product goes to ECO standby mode
automatically.
Press .
»» The product switches to the last selected
source.
Switch to standby mode
Set the clock
Press again to switch the product to standby
mode.
»» The clock (if set) is displayed on the
panel.
1
•
In standby mode, press to switch
between working mode and standby
mode.
Note
2
3
•• The product switches to standby mode after 15
minutes inactive.
Switch to ECO power standby mode
Press and hold for more than two seconds.
»» The red ECO power standby indicator
turns on.
•
8
In Eco power standby mode, press to
switch between working mode and ECO
power standby mode.
EN
4
In standby mode, press and hold CLOCK
for more than two seconds to enter the
clock setting mode.
»» [24H] or [12H] is displayed.
Press
/
to select 24H or 12H hour
format, and then press CLOCK.
»» The hour digits begin to blink.
Press
/
to set the hour, and then
press CLOCK.
»» The minute digits begin to blink.
Press
/
to set the minute, and then
press CLOCK.
»» The set clock is displayed.
Note
•• To view clock information in working mode, press
CLOCK.
•• If no button is pressed in 90 seconds during setting,
the product exits clock setting without saving earlier
operations.
Select a source
On the main music system
Press SOURCE repeatedly to select a source.
• [DISC]: the disc in the disc compartment
• [USB]: .mp3 files stored on the connected
USB storage device
• [TUNER]: the FM tuner
• [AUDIO IN]: the audio input through the
AUDIO IN socket
On the remote control
Press CD, FM, USB, orAUDIO IN to select
each source directly.
• CD: the disc in the disc compartment
• FM: the FM tuner
• USB: the .mp3 files stored on the
connected USB storage device
• AUDIO IN:the audio input through the
AUDIO IN socket
EN
9
4Play
Play from disc
1
2
3
4
Press CD to select CD source.
Press
to open the disc compartment.
Insert a disc with the label side up.
Press to close the disc compartment.
»» Play starts automatically. If not, press
.
Control play
/
/
Play from USB
Note
•• Make sure that the USB device contains playable audio
content.
1
2
10
Insert a USB device into the
socket.
Press USB to select the USB source.
»» Play starts automatically. If not, press
.
EN
VOL +/SOUND
DISPLAY
Start, pause, or resume play.
Stop play.
Select an album or a folder.
Press to skip to the previous or
next track.
Press and hold to search
backward/forward within a track.
Play a track or all tracks
repeatedly.
Play tracks randomly.
Increase or decrease the volume.
Mute or unmute sound.
Select a preset sound equalizer.
Adjust display brightness.
Skip tracks
When playing a CD:
Press
/
to select tracks.
When playing an MP3 disc and USB:
1
2
Press
Press
/
to select an album or a folder.
/
to select a track or a file.
Program tracks
This function allows you to program 20 tracks
in the desired sequence.
1
2
3
4
5
In stop mode, press PROG to activate the
program mode.
»» [PROG] (program) and [001 PR 01]
are displayed.
For MP3 tracks, press
album.
/
to select an
Press
/
to select a track, and then
press PROG to confirm.
Repeat steps 2 to 3 to program more
tracks.
Press
to play the programmed tracks.
»» During play, [PROG] (program) is
displayed.
To erase the program
Press twice.
EN
11
5 Listen to the
radio
Tune to a radio station
Tip
•• Position the antenna as far as possible from TV, VCR, or
Program radio stations
manually
1
2
3
other radiation source.
•• For optimal reception, fully extend and adjust the
position of the antenna.
1
2
3
Press FM to select FM source.
Press and hold
/
for more than two
seconds.
»» The radio tunes to a station with
strong reception automatically.
Repeat step 2 to tune to more stations.
To tune to a weak station:
Press
/
repeatedly until you find optimal
reception.
Program radio stations
automatically
Note
•• You can program a maximum of 20 preset radio
stations (FM).
In tuner mode, press and hold PROG for
more than two seconds to activate automatic
programming.
»» All available stations are programmed
in the order of waveband reception
strength.
»» The first programmed radio station is
broadcast automatically.
12
EN
4
Tune to a radio station.
Press PROG to activate program mode.
»» [PROG] (program) displays on the
screen.
Press / to allocate a number from
1–20 to this radio station, and then press
PROG to confirm.
»» The preset number and the frequency
of the preset station are displayed.
Repeat steps 1-3 to program more
stations.
Note
•• To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press
number.
/
to select a preset
6 Adjust sound
The following operations are applicable to all
supported media.
Select a preset sound effect
•
Press SOUND repeatedly to select a
preset sound effect.
• DSC1, DSC2, DSC3, DSC4, and DSC5
Adjust volume level
•
•
On the remote control, press VOL +/repeatedly.
On the main unit, rotate the volume knob.
Mute sound
•
Press
to mute or unmute the sound.
EN
13
7 Other features
Activate/deactivate alarm timer
In standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate timer.
»» If timer is activated, is displayed.
Set the alarm timer
This product can be used as an alarm clock. You
can select the disc, FM, or .mp3 files on a USB
storage device as alarm source.
Note
Tip
•• Alarm timer is not available in AUDIO IN mode.
Note
•• If CD/USB source is selected, but no disc is placed
or no USB device is connected, the TUNER source is
selected automatically.
•• Make sure that you have set the clock correctly.
•• If the selected alarm source is unavailable, this product
switches to FM mode automatically.
1
2
3
4
5
In normal standby mode, press and hold
SLEEP/TIMER for two seconds.
»» The hour digits blink.
»»
is displayed.
Press
/
repeatedly to set the hour,
and then press SLEEP/TIMER to confirm.
»» The minute digits blink.
Press
/
to set the minute, and then
press SLEEP/TIMER to confirm.
»» The last selected alarm source blinks.
Press
/
to select an alarm source
(DISC, USB or Tuner), and then press
SLEEP/TIMER to confirm.
»» VOL_XX (XX indicates the volume
level of alarm) blinks.
Press
/
to set the alarm volume,
and then press SLEEP/TIMER to confirm.
Set the sleep timer
This music system can switch to standby
automatically after a set period of time.
• When the music system is turned on, press
SLEEP/TIMER repeatedly to select a set
period of time (in minutes).
»» When sleep timer is activated, is
displayed.
To deactivate sleep timer
• Press SLEEP/TIMER repeatedly until [OFF]
(sleep off) is displayed.
»» When sleep timer is deactivated,
disappears.
Listen to an external device
You can listen to an external device through this
unit with an MP3 link cable.
1
14
EN
Connect an MP3 link cable (not supplied)
between:
• AUDIO IN jack (3.5 mm) on the
product,
• and the headphone jack on an external
device.
2
3
Press AUDIO IN to select AUDIO IN
source.
Start to play the device (see the device
user manual).
AUDIO IN
EN
15
8Product
information
•• Product information is subject to change without prior
notice.
Amplifier
S/N Ratio
Total Output Power
Frequency Response
Maximum 70W
60 Hz - 20 kHz; ±3 dB
Signal to Noise Ratio
Total Harmonic
Distortion
Aux Input
≥ 75 dBA
< 1%
600 mV ± 100 mV
RMS 22kohm
Speakers
8 ohm
20mm Tweeter,
100mm Woofer
83 ± 3dB/m/W
Tuner (FM)
Tuning Range
Tuning grid
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
Search Selectivity
Total Harmonic Distortion
Signal to Noise Ratio
16
EN
Laser Type
Disc Diameter
Support Disc
Audio DAC
Total Harmonic
Distortion
Frequency Response
Specifications
Sensitivity
USB Direct Version
2.0 Full Speed
Disc
Note
Speaker Impedance
Speaker Driver
USB
87.5-108 MHz
50 KHz
<22 dBf
<45 dBf
<30 dBf
<3%
>45 dB
Semiconductor
12 cm/8 cm
CD-DA, CD-R, CDRW, MP3-CD
24 Bits/44.1 KHz
<3% (1 KHz)
20 Hz - 20 kHz (44.1
KHz)
≥80 dBA
General information
AC power
Operation Power
Consumption
Eco Standby Power
Consumption
Dimensions
- Main Unit
(W x H x D)
- Speaker Box
(W x H x D)
Weight
- Main Unit
- Speaker Box
220-240 V~, 50/60 Hz
<25 W
<0.5 W
180 x 121 x 227 mm
140 x 260 x 182 mm
1.62 kg
1.72 kg x 2
USB playability information
Compatible USB devices:
• USB flash memory (USB2.0 or USB1.1)
• USB flash players (USB2.0 or USB1.1)
• memory cards (requires an additional card
reader to work with this unit)
Supported USB formats:
• USB or memory file format: FAT12, FAT16,
FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
• Directory nesting up to a maximum of 8
levels
• Number of albums/ folders: maximum 99
• Number of tracks/titles: maximum 999
• File name in Unicode UTF8 (maximum
length: 32 bytes)
Unsupported USB formats:
• Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
will not be shown in the display.
• Unsupported file formats are skipped. For
example, word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
• WMA, AAC, WAV, PCM audio files
• DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
• WMA files in Lossless format
Supported MP3 disc formats
•
•
•
•
•
ISO9660, Joliet
Maximum title number: 128 (depending on
file name length)
Maximum album number: 99
Supported sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
Supported Bit-rates: 32~256 (kbps),
variable bit rates
EN
17
9Troubleshooting
Warning
•• Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
No power
•• Make sure that the AC power cord of the
device is connected properly.
•• Make sure that there is power at the AC
outlet.
•• As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
No sound or poor sound
•• Adjust the volume.
•• Check that the speakers are connected
correctly.
•• Check if the stripped speaker wires are
clamped.
No response from the unit
•• Disconnect and reconnect the AC power
plug, then turn on the unit again.
•• As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
Remote control does not work
•• Before you press any function button, first
select the correct source with the remote
control instead of the main unit.
•• Reduce the distance between the remote
control and the unit.
18
EN
••
••
••
Insert the battery with its polarities (+/–
signs) aligned as indicated.
Replace the battery.
Aim the remote control directly at the
sensor on the front of the unit.
No disc detected
•• Insert a disc.
•• Check if the disc is inserted upside down.
•• Wait until the moisture condensation at
the lens has cleared.
•• Replace or clean the disc.
•• Use a finalized CD or correct format disc.
Cannot display some files in USB device
•• The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
•• The formats of these files are not
supported.
USB device not supported
•• The USB device is incompatible with the
unit. Try another one.
Poor radio reception
•• Increase the distance between the unit and
your TV or other radiation sources.
•• Fully extend the FM antenna.
Timer does not work
•• Set the clock correctly.
•• Switch on the timer.
Clock/timer setting erased
•• Power has been interrupted or the power
cord has been disconnected.
•• Reset the clock/timer.
Copyright © 2015 Gibson Innovations Limited. Revised Edition © 2017
This product has been manufactured by, and is sold under the responsibility of Gibson
Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and
are used under license.
MCM2350_12_UM_V3.0
Download PDF
Similar pages