WALLVIEW™ PRO HE100
WITH HSDS™
Vaddio™ EZCamera™ Interface
Module and Quick-Connect™ PRO
The Vaddio WallVIEW PRO HE100 is built around the
Panasonic® AW-HE100 high definition pan/tilt/zoom
camera. With three megapixel 1/3” CCDs and a 13X
optical zoom lens, the WallVIEW PRO HE100 is an ideal
choice for a wide range of high definition video
applications.
The WallVIEW PRO HE100’s active
electronics deliver high definition or standard definition
video up to 500’ (152.4m) over standard Cat. 5 cable. The
WallVIEW PRO HE100 system includes the EZCamera
Interface Module (EZIM) and Quick-Connect PRO (QCP)
interface. Vaddio’s HE100 WallVIEW system utilizes a 12
VDC version of the HE100, not the standard AC powered
version of the camera sold by Panasonic.
The WallVIEW PRO HE100 uses high speed differential
signaling (HSDS) for the video signals which gives this
Figure 1: WallVIEW PRO HE100 System
system high definition video quality over longer Cat. 5
with Camera, EZIM and Wall Mount
cabling distances and the ability to adjust the signal
depending on the length of the cabling used.
The WallVIEW PRO has many new features including a four position distance adjustment for Cat. 5 cabling,
Y-Gain adjustment for cable length compensation, 1-RU rack mount Quick-Connect PRO (QCP) interface
and the small EZCamera Interface Module (EZIM) which can be paired with several different HD or SD
cameras available today.
Overall, the WallVIEW PRO HE100 is superb for a wide range of high definition shooting applications. It is
also highly suitable for applications in which images are displayed on large-screen displays, such as in
houses of worship, in auditoriums of teaching hospitals, in corporate boardrooms, at sporting events,
tradeshows or concerts and for distance-learning applications in which clear, high definition images are
required.
WHAT’S INCLUDED
•
•
•
•
•
•
•
•
•
•
Panasonic AW-HE100 High Definition PTZ
Camera (3 – 1/3” CCDs)
Vaddio EZCamera Interface Module (EZIM)
Vaddio EZIM HE 100 HD Break-out Cable
Vaddio Quick-Connect PRO (QCP) (1-RU
Rack Mount Interface)
Panasonic IR Remote
36V PowerRite™ Power Supply
EZCamera Protocol Adapter (RS-232 to RS-422)
Vaddio Thin Profile Wall Mount HE100
Mounting Hardware
Documentation
TECHNICAL FEATURES
Distances up to 500’ (152.4m) with HSDS
The WallVIEW PRO HE100 uses high speed
differential signaling (HSDS) which allows higher
definition video signals to be conveyed over
longer Cat. 5 cabling distances.
EZCamera Interface Module (EZIM)
The EZCamera Interface Module is a small
camera interface module that mounts to the back
of the wall mount and is a interface for several
HD or SD PTZ cameras available today. The
EZIM uses a multi-pin connector and cable
assemblies for maximum flexibility.
Quick-Connect PRO (QCP)
The 1-RU QCP has (high definition) analog
component video (Y, Pb, Pr) for 1080i or 720p
output on BNC connectors.
Distance Adjustments
Because the WallVIEW PRO HE100 uses active
electronics, there are four cable length
adjustments (<100’, 200’, 300’ 400’+) which
equalize the length of the Cat. 5 twisted pairs and
vastly improves the SD and HD video
performance.
©2008 Vaddio – All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Vaddio, EZIM, HSDS, ProductionVIEW,
Quick-Connect, WallVIEW, PowerRite, are registered trademarks of Vaddio. All other trade marks are property of their respective owners. Document
Number 102208 Rev. A
TECHNICAL FEATURES (CONTINUED)
Luminance Gain Adjustment
A luminance gain control (Y-Gain) is also
provided which allows for enhanced control and
fine tuning of the video signals when longer Cat.
5 cabling runs are required.
Superior Power Regulation
The WallVIEW PRO HE100 uses the PowerRite
36V power supply which is the key to providing
the electrical current that the larger PTZ camera
motors, like the AW-H700 or EVI-HD1, require to
operate properly. The EZIM regulates the power
to run the system at optimum efficiency.
Wall Mount Included
With each system, a Wall Mount Bracket is
provided. The Wall Mount can be attached to the
wall with anchors or can be mounted directly to a
standard 3-gang wall box. There are pre-drilled
and tapped mounting holes for the EZCamera
Interface Module on the back of the Wall Mount
to make installation easy.
Complete System
The WallVIEW PRO HE100 comes complete and
includes everything the installer needs to
accomplish a professional installation. Three Cat.
5 cable runs for Power, Video and Control are
required to complete the installation. A fourth
Cat. 5 is only needed for daisy-chain control
configurations.
TECHNICAL IMAGES
Figure 2: Quick-Connect PRO (QCP) interface front panel and rear panel images with functional callouts.
RJ-45 for HD or SD
Video Signals
For PowerRite 36 VDC 2A
Power Supply
HD or SD Outputs on
BNC Connectors
POWER RJ-45 with 4-pair Cat. 5 cable
dedicated to supply power to camera
Video Adjustments for Y-Gain and
Distance (up to 500’)
Camera Select Switch – Designed
for future use
IR Gain Adjust and Feed Through from Camera – This is an
unused feature with the Panasonic AW-HE100 camera
Figure 3: EZCamera Interface Module (EZIM) with four (4) RJ-45 connectors for POWER, RS-232 IN & OUT and VIDEO (HD or SD
with IR), Top View (left) and Isometric View (right)
EZIM ISO View
EZIM Top View
RJ-45 Connectors for Video,
Power – RS-232 Ports are
unused with the HE100
Toll Free 800-572-2011 ● Phone 763-971-4400 ● FAX 763-971-4464 ● www.vaddio.com
Mounting Flange for
securing the EZIM
to camera mounts
DB-25 Connector
for Camera Breakout Cable
SYSTEM CONNECTIVITY
Figure 4:
Basic system connectivity of a WallVIEW PRO HE100 System and ProductionVIEW™ Super Joystick Controller
HD Video to Switcher/Display
Quick-Connect PRO Universal
Cat. 5 Cables Up to 500’
High Speed Differential Signaling
RS-232 to RS422 Adapter
Vaddio HD Interface Cable
for WallVIEW HE100
RS-232
DB-25M
①
②
③
④
RS-422
Connector List
① DB-15HD (Y,PB,PR)
Vaddio ProductionVIEW
Super Joystick
② RS-232 IN (not used)
③ RS-232 OUT (not used)
④ POWER (EIAJ4)
RS-422
AW-HE100 on Wall Mount,
EZIM with RS-422 Adapter
Mounted Behind Camera
TECHNICAL SPECIFICATIONS
WallVIEW PRO HE100
WallVIEW PRO HE100 999-6105-000 (NTSC)
WallVIEW PRO HE100 999-6105-001 (PAL)
Part Numbers
•
Quick-Connect PRO Interface (QCP)
Connectors
Power Connector: EIAJ4
Power RJ-45: Supplies 36V to EZCamera Interface Module Regulator
IR: 2-Pin Phoenix type spring cage connector
Video Outputs: BNC Connectors for HD Analog Component (Y,PB,PR) or SD
Video RJ-45: Transports HD or SD video from camera depending on camera selection switch position
Camera Select Switch
Currently unused with the Panasonic camera.
Video Adjustments
Y-Gain (luminance gain) for fine tuning over longer cable distances
Distance Compensation: 100’, 200’, 300’, 400’+
Cat. 5 Cable Distance
Up to 500’ (152.4m) for Video, Power, Control (RS-232 ports are unused with Panasonic camera)
Power Supply
36 VDC, 2.78 Amp
Dimensions
1-RU Rack Mount 1.75” H x 19” W x 6” D (4.4 cm x 48.3 cm x 15.2 cm)
•
EZCamera Interface Module (EZIM)
Connectors
Four (4) RJ-45 Connectors
One DB-25 for Power, Video, Control & IR
Cable Assemblies
For Panasonic AW-HE100: DB-25M to DB-15HD/RJ-45/EIAJ4 Power Connector
Power Regulator
Supplies 12VDC to Cameras
Dimensions
Approx. 3” H x 4.5” W x 1.2” D (7.6 cm x 11.4 cm x 3 cm)
•
Wall Mount HE100
Materials
Dimensions
Weight
12-Gauge CRS with Black Powder Coat Paint
8” H x 8.75” W x 13.5” D (20.3 cm x 22.2 cm x 34.3 cm)
Approx. 6 lbs. (2.7 kg)
Toll Free 800-572-2011 ● Phone 763-971-4400 ● FAX 763-971-4464 ● www.vaddio.com
Download PDF
Similar pages