SPECIFICATIONS Vertical Anemometer RM Young 27106-T

SPECIFICATIONS
Vertical Anemometer RM Young 27106-T
FEATURES
• Allows measurement of
vertical component of wind
speed
•
The vertical anemometer
is designed to give an
increasing signal for
updraft winds. Since the
anemometer signal reads
both positive and negative
wind speeds, zero wind
speed corresponds to the
mid-range of the signal
measured by the NRG
Symphonie logger. A
propeller anemometer
SCM #3745 is required for
proper signal conditioning
by the Symphonie logger,
and the 27106-T connects
to the Symphonie’s wiring
panel with a shielded 2conductor cable.
0 – 2.5 Volts DC output
SPECIFICATIONS
Description
Output signal
Sensor type
propeller anemometer
Applications
measuring vertical component of wind velocity
Sensor range
0.5 m/s (1.1 mph) to 40 m/s (89 mph)
Instrument compatibility
NRG Symphonie logger (with vertical anemometer
SCM)
Signal type
millivolt voltage
Transfer function
m/s = 0.01800 x mV
Accuracy
+/- 1%
Recommended load resistance >10 k Ohms
Output signal range
+/- 2250 mV
Response characteristics Swept diameter of rotor
200 mm (7.9 inches)
Installation
Mounting
• connector threads onto 3/4 inch pipe size mast
• sensor mounts to threaded connector
Physical
Connections
• cable solders to connector
• sensor plugs into threaded connector
Global leader in wind measurement technology
110 Riggs Road · Hinesburg · VT 05461 USA · TEL (802) 482-2255 · FAX (802) 482-2272 · EMAIL sales@nrgsystems.com
\\sol\sales\salesout\spec sheets\2244kitspec.doc
Rev 1.0
15 January 2009
Download PDF
Similar pages