WIRING CAT 5 CABLES
RJ 45 PIN NUMBERS.
Hold the plug as shown below
with the contacts facing up and
the retaining clip underneath.
Sound Leisure digital jukeboxes can be connected to a variety of
additional units.There are a full range or remote selectors
available, any number of which can be connected to a main
jukebox, along with ancillary devices such as Sound Leisure's DJ
console and the Ind:e games console.
1 2 3 4 5 6 7 8
Any device connected to a Sound Leisure main jukebox will
require a category 5 network cable to connect the remote
machine to the main jukeboxes.
Depending on the type of machine to be connected and the
number of machines to be connected to the main jukebox, either
a 'straight through' or 'Cross Over' cable will be required. If two
units of more are to be connected to any jukebox an additional
'router' will always be required.
Consult the 'jukebox connection Matrix' info sheet for details of
which cables are required to connect any combination of Sound
Leisure Jukeboxes. This can be downloaded from the Digital
section Sound Leisure's 'Support' pages, online at
www.soundleisure.com.
IMPORTANT NOTE
CAT5 cables MUST be wired exactly as shown below. CAT 5 relies on twisted pairs of
cables to maintain signal strength. Arranging the individual wires in ANY alternative
combinations will result in poor signal quality or total loss of signal quality, under which
circumstances the jukebox will not connect to the secondary device.
CAT5 CABLE WIRING DETAILS
Cross Over Category 5 Ethernet cable
Pin
Number
Pin
Co lour
1
o/w
2
o
Pin
Number
1
2
Straight Through Category 5 Ethernet cable
3 4
5
7 8
6
g/w bl bl/w g br/w b
3
4
5
6
7
8
Pin
Number
Pin
Co lour
1
o/w
2
o
Pin
Number
1
2
www.soundleisure.com
3 4
5
7 8
6
g/w bl bl/w g br/w b
3
4
5
6
7
8