28 23 29-1 section 28 23 29 h.264 5 megapixel superior hd

Honeywell Performance Series 5 MP IP Fisheye Camera
www.honeywell.com/security
Guide Specifications in CSI Format
800-23260 Rev A
SECTION 28 23 29
H.264 5 MEGAPIXEL SUPERIOR HD PERFORMANCE SERIES IP FISHEYE CAMERA
PART 1 GENERAL
1.1
SECTION INCLUDES
A.
1.2
Provide a high definition 5 megapixel superior HD, indoor IP fisheye camera system for
video surveillance, including design, supply, installation, and commissioning.
RELATED SECTIONS
NOTE TO SPECIFIER: Include related sections as appropriate if video surveillance system is integrated
to other systems.
1.3
A.
Section 26 05 00: Common Work Results for Electrical, for interface and coordination with
building electrical systems and distribution.
B.
Section 28 05 13: Conductors and Cables for Electronic Safety and Security, for cabling
between system servers, panels, and remote devices.
C.
Section 28 05 28: Pathways for Electronic Safety and Security, for conduit and raceway
requirements.
D.
Section 28 23 00: Video Surveillance Equipment, for interface with, and administration of
video recording equipment.
E.
Section 28 23 23: Video Surveillance Systems Infrastructure.
F.
Section 28 23 29: Video Surveillance Remote Devices and Sensors.
REFERENCES
A.
Reference Standards: Provide systems that meet or exceed the requirements of the
following publications and organizations as applicable to the work of this Section.
1.
Canadian ICES-003.
2.
Canadian Standards Association (CSA).
3.
Conformity for Europe (CE).
4.
Electronic Industry Association (EIA).
5.
Federal Communications Commission (FCC).
28 23 29-1
Honeywell Performance Series 5 MP IP Fisheye Camera
www.honeywell.com/security
1.4
6.
Institute of Electronic and Electrical Engineers (IEEE).
7.
Joint Photographic Experts Group (JPEG).
8.
National Television Systems Committee (NTSC).
9.
Phase Alternating Line (PAL).
10.
Underwriters Laboratories Inc. (UL).
11.
IP Code (Ingress Protection Rating) per IEC 60529.
Guide Specifications in CSI Format
800-23260 Rev A
SYSTEM DESCRIPTION
A.
The 5 megapixel indoor IP fisheye camera, HFD5PR1, shall provide:
1.
2.
3.
Superior Image Quality
a.
Full HD 5 megapixel (2592 × 1944) resolution, 1-12 fps image with a 1/3" 5
megapixel progressive scan CMOS sensor.
b.
Digital WDR, ensuring glare-free images.
c.
Electronic day/night functionality providing vivid color images by day and clear
black-and-white images at night.
d.
Image dewarping makes the fisheye output easy to view and scan for intruders.
e.
Embedded PTZ control within the fisheye video allows users to control the part
of the 360° view to focus on.
f.
Excellent low-light performance with 3D noise reduction, and together with
H.264 High Profile codec saving storage and bandwidth.
Flexible Surveillance Solution
a.
1.42 mm, F2.6, fixed fisheye lens.
b.
H.264 and MJPEG codec with dual stream support.
c.
–22°F to 104°F (–30°C to 40°C) working temperature.
d.
Security features include individual signed certificates and data encryption.
e.
Cameras can be retrofitted on many existing NVR installations without requiring
additional storage.
Easy to Install and Use
a.
Built-in PoE (Power over Ethernet) eliminates separate power supply and
associated wiring; 12 V DC inputs where PoE power is unavailable.
b.
Remote configuration through web client or from the NVR.
c.
Included accessories: security screw driver, mounting screws, drywall anchors,
mounting template, and waterproof joint for network cable.
28 23 29-2
Honeywell Performance Series 5 MP IP Fisheye Camera
www.honeywell.com/security
4.
Onboard Video Storage
a.
1.5
1.6
Guide Specifications in CSI Format
800-23260 Rev A
Supports up to 64 GB microSDHC card for local video storage when network is
interrupted.
SUBMITTALS
A.
General: Submittals shall be made in accordance with the Conditions of the Contract and
Submittal Procedure Section.
B.
Manufacturer’s Product Data: Submit manufacturer’s data sheets indicating systems and
components proposed for use, including instruction manuals.
C.
Shop Drawings: Submit installation drawings, including connection diagrams for interfacing
equipment, list of connected equipment, and locations for major equipment components.
Shop drawings shall indicate surrounding construction as provided for the Project.
D.
Project Record Drawings: Indicate location of equipment and wiring on project record
drawings. Submit an electronic version of the project record drawings not later than
Substantial Completion of the Project.
E.
Operation and Maintenance Data: Submit manufacturer’s operation and maintenance data
customized to the system installed. Include operator manuals.
F.
Field Tests: Submit results of field testing of every device, including date, testing personnel,
retesting date (if applicable), and confirmation that every device passed field testing.
G.
Maintenance Service Agreement: Submit a sample copy of the manufacturer’s maintenance
service agreement, including cost and services for a one year period for Owner’s review.
Maintenance shall include, but not be limited to, labor and materials to repair the system,
tests and adjustments, and regular inspections.
QUALITY ASSURANCE
A.
Manufacturer: Minimum 10 years experience in manufacturing and maintaining video
surveillance systems. Manufacturer shall provide toll-free technical assistance and support
available 24/7.
B.
Manufacture Location: Provide equipment assembled in China.
C.
Installer: Minimum 2 years experience installing similar systems and shall be acceptable to
the manufacturer of the video surveillance system.
D.
Regulatory Requirements:
1.
Emissions: FCC, Part 15B; EN 55032.
2.
Immunity: EN 50130-4; EN 55024.
3.
Safety: North America UL Listed to UL/CSA 60950-1; EU – EN 60950-1.
4.
RoHS: EN50581: 2012.
28 23 29-3
Honeywell Performance Series 5 MP IP Fisheye Camera
www.honeywell.com/security
E.
F.
1.7
1.8
Guide Specifications in CSI Format
800-23260 Rev A
Environmental Requirements:
1.
Operating temperatures shall be between –22°F (−30°C) and 104°F (40°C).
2.
Relative Humidity: Less than 95%, non-condensing.
Power Requirements:
1.
Input Voltage: 12 V DC +/-10%, PoE IEEE 802.3af.
2.
Power Consumption: PoE (802.3af) Class 0, 12 V DC 6.0 W.
DELIVERY, STORAGE, AND HANDLING
A.
Packing and Shipping: Deliver products in manufacturer’s labeled packages.
B.
Storage and Protection: Store and handle products in accordance with manufacturer’s
requirements, in a facility where environmental conditions are within recommended limits.
WARRANTY
A.
Manufacturer’s Guarantee: Five (5) years from the manufacture date code under normal use
and service for the video surveillance system.
PART 2 PRODUCTS
2.1
MANUFACTURERS
A.
Specified Manufacturer: Honeywell 5 megapixel indoor IP fisheye
camera, www.honeywell.com/security.
B.
Accepted Part Numbers:
1.
2.2
SYSTEM COMPONENTS
A.
2.3
HFD5PR1: Network DN Fisheye Camera, 1/3" CMOS, 5 MP, 1.42 mm fixed fisheye
lens, PoE, H.264.
5 megapixel low light, indoor IP fisheye camera, camera housing, cabling, and a web based
GUI that provides complete control of camera settings and live video access.
OPERATIONAL REQUIREMENTS
A.
The 5 MP low light, indoor IP fisheye camera system shall meet or exceed the following
camera specifications:
1.
Image Sensor: 1/3" 5 MP Progressive CMOS.
28 23 29-4
Honeywell Performance Series 5 MP IP Fisheye Camera
www.honeywell.com/security
Guide Specifications in CSI Format
800-23260 Rev A
2.
Total Pixels: 2592 × 1944.
3.
Minimum Illumination: 0.01 lux color / 0.001 lux BW @ F2.6.
4.
Wide Dynamic Range: Digital WDR.
5.
Backlight Compensation: BLC/HLC/DWDR.
6.
Day/Night: Auto (Electronic)/Color/BW.
7.
Gain Control: Auto/Manual.
8.
Noise Reduction: 3DNR.
9.
Privacy Masking: Up to 4 areas.
10.
Electronic Shutter Speed: Auto, Manual, 1/3(4) to 1/100,000 seconds.
11.
Video Standard: NTSC/PAL.
12.
White Balance: Auto/Manual.
13.
Signal-to-Noise Ratio: >50 dB.
14.
WDR: Digital WDR.
15.
Audio Stream: 1/1 channel In/Out (Built-in Mic).
16.
Audio Compression: G.711a/G.711u.
17.
Lens: 1.42 mm fixed fisheye lens, F2.6.
18.
Horizontal Angle of View: 185°.
B.
The 5 MP low light, indoor IP fisheye camera system shall provide day/night functionality
with electronic day/night switching.
C.
The 5 MP low light, indoor IP fisheye camera system shall provide, in high contrast lighting
conditions, higher quality images and significantly better dynamic range than conventional IP
cameras.
D.
The 5 MP low light, indoor IP fisheye camera system shall provide up to 4 fully configurable
privacy zones to mask sensitive areas of a video image.
E.
The 5 MP low light, indoor IP fisheye camera system shall support three (3) installation
modes to select for the installation orientation of the camera: Ceiling, Wall or Floor
installation modes.
F.
The 5 MP low light, indoor IP fisheye camera system shall include the following 11 display
options to allow the user to display the 360° video in the best mode for any surveillance
scenario:
1.
Original 360° image display mode displays the entire view of the 360° image in a
round image layout.
2.
Single panorama image display mode displays the entire view of the 360° image in a
flattened panoramic layout with sub image(s) that focus on one or more areas in the
360° image.
28 23 29-5
Honeywell Performance Series 5 MP IP Fisheye Camera
www.honeywell.com/security
G.
Guide Specifications in CSI Format
800-23260 Rev A
3.
Double panorama image display mode splits the 360° image into two (2) horizontal
180° flattened panoramic layouts.
4.
Original 360° image with three EPTZ (virtual PTZ) region images display mode
displays the 360° image in a quarter of the screen and three inset EPTZ region
images in the other three quarters of the screen.
5.
Four sub images with original 360° image inset or side-by-side, with 4 sub images that
focus on different regions in the 360° image.
6.
Original 360° image with eight sub images display mode with 8 sub images that focus
on different regions in the 360° image.
7.
Two vertical panorama images with original 360° image inset or side-by-side display
mode, with the vertical panorama images splitting the 360° image into two (2) vertical
180° flattened layouts (ceiling installation mode only).
8.
180° expanded rectangular panorama display mode (wall installation mode only),
displaying the entire 360° image in an expanded rectangular image.
9.
180° expanded rectangular panorama with three sub images display mode, with 3 sub
images that focus on different regions in the 360° image (wall installation mode only).
10.
180° expanded rectangular panorama inset or side-by-side with four sub images
display mode, with 4 sub images that focus on different regions in the 360° image
(wall installation mode only).
11.
180° expanded rectangular panorama with eight sub images display mode, with 8 sub
images that focus on different regions in the 360° image (wall installation mode only).
The 5 MP low light, indoor IP fisheye camera system shall include, as standard, a web
based GUI that provides complete control of the camera settings. The web based GUI shall:
1.
Permit 20 users @ 5 MP resolution at 10 Mbps in simultaneous unicast.
2.
Provide multiple user access levels with password protection.
3.
Offer video access from a web browser. The web browser shall offer live viewing for
up to 20 users @ 5 MP resolution at 10 Mbps with full-control of all camera settings
available to the administrator.
4.
Be easily discovered through Honeywell IPC Config Tool or other appropriate device
search tools.
5.
Be available to record streaming video or snapshot images to a PC hard disk. The
administrator must have the ability to turn the recording function on or off through the
web based GUI.
6.
Require the following hardware as a minimum for the web browser:
a.
Operating system: Windows 7 32-bit/64-bit
b.
Processor: Intel® Pentium® M processor, 2.16 GHz or faster
Intel® Core™2 Duo processor, 2.0 GHz or faster
c.
System memory (RAM): 2 GB
d.
Graphics card: AGP graphics card 64 MB RAM, DirectDraw
28 23 29-6
Honeywell Performance Series 5 MP IP Fisheye Camera
www.honeywell.com/security
H.
Guide Specifications in CSI Format
800-23260 Rev A
e.
Network card: 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
f.
Web browser: Microsoft Internet Explorer 11.0 or later
g.
Viewer: ActiveX control plug-in for Internet Explorer
The 5 MP low light, indoor IP fisheye camera system shall support IPv4/v6, HTTP, TCP/IP,
DHCP, IGMP, DDNS, RTSP, RTP, UDP, FTP, ICMP, SMTP, PPPoE, HTTPS, SSL, UPnP,
IEEE 802.1X, IP Filter, SNMP, QoS, Bonjour, DNS, and NTP protocols.
NOTE TO SPECIFIER: Some development may be required in specific user cases to support some of
these protocols in the field as naturally the protocols will mature over time.
I.
J.
The 5 MP low light, indoor IP fisheye camera system shall provide dual H.264 and/or
H.264/MJPEG video streams simultaneously. The streams shall have the following
functions:
1.
Main Stream: Support for 5 MP (2560x1920) and 3 MP (2048x1520) resolution at 1-12
frames per second (NTSC/PAL). The camera can also support lower resolutions at 130/25 frames per second: UXGA (1600x1200), 1.3M (1280x960), 720p (1280x720),
D1 (704x576/704x480), CIF (352x288/352x240) resolutions.
2.
Sub Stream: 1-25/30 fps D1 (704x576/704x480), CIF (352x288/352x240).
3.
The 5 MP low light, indoor IP fisheye camera shall transmit additional H.264 or
MJPEG video streams simultaneously with the primary H.264 or MJPEG stream (up
to 2 streams).
4.
The bit rate for the H.264 and MJPEG streams can be set to constant or variable bit
rate. The resolutions and frame rates for all streams are adjustable by the
administrator.
5.
The fully featured 5 MP low light, indoor IP fisheye camera shall support three (3)
H.264 profiles: High profile, Main profile, and Baseline profile.
The 5 MP low light, indoor IP fisheye camera system shall feature web GUI menus for
programming camera parameters. A minimum of the following menus must be available:
1.
Live
2.
Playback
3.
Camera Conditions Setup
4.
a.
Conditions
b.
Profile Management
Video Setup
a.
Video
b.
Snapshot
c.
Overlay
d.
Path
28 23 29-7
Honeywell Performance Series 5 MP IP Fisheye Camera
www.honeywell.com/security
5.
Audio Setup
6.
Network Setup
7.
a.
TCP/IP
b.
P2P
c.
Connection
d.
PPPoE
e.
DDNS
f.
IP Filter
g.
SMTP (Email)
h.
UPnP
i.
SNMP
j.
Bonjour
k.
Multicast
l.
802.1x
m.
QoS
n.
Certificate
Event Setup
a.
8.
Video Detection
1)
Motion Detection
2)
Video Tamper
b.
Heat Map
c.
Alarm
d.
Abnormality
1)
SD Card
2)
Network
3)
Illegal Access
Storage Setup
a.
Schedule
1)
Record Schedule
2)
Snapshot Schedule
3)
Holiday Schedule
28 23 29-8
Guide Specifications in CSI Format
800-23260 Rev A
Honeywell Performance Series 5 MP IP Fisheye Camera
www.honeywell.com/security
b.
c.
9.
10.
Guide Specifications in CSI Format
800-23260 Rev A
Destination
1)
Path
2)
Local
3)
FTP
4)
NAS
Record Control
System Setup
a.
General
b.
Date&Time
c.
Account
d.
Default
e.
Import/Export
f.
Auto Maintain
g.
Upgrade
Information
a.
Version
b.
Log
c.
Online User
K.
The 5 MP low light, indoor IP fisheye camera system must provide the option of restoring all
displays, alarms, camera settings, and diagnostic settings to factory default with a Web GUI
command. In addition, the unit shall offer a simple “reboot” with a Web GUI command.
L.
The 5 MP low light, indoor IP fisheye camera system should provide a warning message
through relay output/FTP/Email/HTTP, upload an image through FTP/Email or record video
to a micro SD card/network recorder upon motion detection. The administrator must have
the ability to turn the motion detection function on or off through the web GUI.
M.
The 5 MP low light, indoor IP fisheye camera system should provide a warning message
through relay output/FTP/Email, or record video to a micro SD card upon network failure
detection, the minimum detecting period is 5 seconds. The administrator must have the
ability to turn the network failure detection function on or off through the web GUI.
N.
The 5 MP low light, indoor IP fisheye camera system should provide micro SD card
recording for backup when there is an event (Alarm, Motion detection, Network failure
detection) or scheduling. The administrator must have the ability to turn the recording
function on or off through the web GUI. The micro SD card storage size can be varied from 8
GB to 64 GB. The micro SD card can be inserted, replaced or removed by the installer or the
user. The 5 MP low light, indoor IP fisheye camera does not come with a micro SD card
28 23 29-9
Honeywell Performance Series 5 MP IP Fisheye Camera
www.honeywell.com/security
Guide Specifications in CSI Format
800-23260 Rev A
installed. It is recommended to use a high quality micro SD card for recording, such as a
Class 10 micro SD card.
NOTE TO SPECIFIER: IMPORTANT! Any damaged files on an installed micro SD card incurred by
malfunction or error in files saved on the micro SD card, regardless of the cause, are not guaranteed by
Honeywell.
2.4
O.
The 5 MP low light, indoor IP fisheye camera system shall provide Network share recording
for backup when there is an event (alarm, motion detection) or scheduling. The administrator
must have the ability to turn the recording function on or off through the web GUI.
P.
The 5 MP low light, indoor IP fisheye camera shall include one (1) on-board alarm inputs for
normally open or normally closed dry contacts.
Q.
The 5 MP low light, indoor IP fisheye camera shall include one (1) on-board alarm output for
normally open or normally closed dry contacts. The camera shall have the ability to perform
the relay out signal to the alarm equipment.
R.
The 5 MP low light, indoor IP fisheye camera housing shall consist of die cast aluminum with
a white powder coat finish (RAL9003).
S.
The 5 MP low light, indoor IP fisheye camera shall be available in indoor configurations
designed for installation with wall, surface, corner, pole and ceiling mount configurations.
SERIES INTEGRATIONS
A.
B.
The following accessories are compatible with the 5 MP low light, indoor IP fisheye camera:
1.
HQA-PM2 – Pole Mount Adapter, Off-White (requires compatible junction box: HQABB2)
2.
HQA-BB2 – Junction Box, Off-White
3.
HQA-WK – Wall Mount Bracket, Off-White
The following embedded NVRs are recommended for the 5 MP low light, indoor IP fisheye
camera:
1.
HEN081*4: 8-channel, 2 HDD, 8 PoE, 4K, H.265
2.
HEN161*4: 16-channel, 2 HDD, 16 PoE, 4K, H.265
3.
HEN321*4: 32-channel, 2 HDD, 16 PoE, 4K, H.265
4.
HEN162*4: 16-channel, 4 HDD, 16 PoE, 4K, H.265
5.
HEN322*4: 32-channel, 4 HDD, 16 PoE, 4K, H.265
6.
HEN642*4: 64-channel, 4 HDD, 16 PoE, 4K, H.265
7.
HEN163*4: 16-channel, 8 HDD, 16 PoE, 4K, H.265, RAID 5&6
8.
HEN323*4: 32-channel, 8 HDD, 16 PoE, 4K, H.265, RAID 5&6
9.
HEN643*4: 64-channel, 8 HDD, 16 PoE, 4K, H.265, RAID 5&6
28 23 29-10
Honeywell Performance Series 5 MP IP Fisheye Camera
www.honeywell.com/security
Guide Specifications in CSI Format
800-23260 Rev A
NOTE TO SPECIFIER: * = hard drive capacity in TB.
2.5
SYSTEM HARDWARE
A.
B.
C.
2.6
The 5 MP low light, indoor IP fisheye camera system shall have the following mechanical
specifications:
1.
Unit Dimensions (W × H): 4.33 × 2.13 inches (110.0 × 54.0 mm).
2.
Unit Weight: 0.55 lb (0.25 kg).
The 5 MP low light, indoor IP fisheye camera system shall have the following electrical
specifications:
1.
Input Voltage: 12 V DC +/-10%, PoE IEEE 802.3af Class 0.
2.
Power Consumption: PoE (802.3af) Class 0, 12 V DC, 6.0 W.
The 5 MP low light, indoor IP fisheye camera system shall be designed to meet the following
environmental conditions:
1.
Operating temperature: –22°F (−30°C) to 104°F (40°C).
2.
Relative Humidity: Less than 95%, non-condensing.
3.
Emissions: FCC - Part 15B; EU – EN 55032.
4.
Immunity: EN 50130-4; EN 55024.
5.
Safety: North America UL Listed to UL/CSA 60950-1; EU – EN 60950-1.
6.
RoHS: EN 50581: 2012.
MANUFACTURER SUPPORT
A.
Manufacturer shall provide customer service, pre-sales applications assistance, after-sales
technical assistance, access to online technical support, and online training using Web
conferencing.
B.
Manufacturer shall provide 24/7 technical assistance and support by means of a toll-free
telephone number at no extra charge.
PART 3 EXECUTION
3.1
EXAMINATION
A.
Examine site conditions prior to installation. Notify Architect and Owner in writing if
unsuitable conditions are encountered. Do not start installation until site conditions are
acceptable.
28 23 29-11
Honeywell Performance Series 5 MP IP Fisheye Camera
www.honeywell.com/security
3.2
3.3
INSTALLATION
A.
All components of the camera system shall be thoroughly tested before shipping to the
project location.
B.
Camera system shall be installed, programmed, and tested in accordance with
manufacturer’s instructions and recommendations.
1.
Coordinate interfaces with other products with Owner’s representative where
appropriate.
2.
Provide conduit, cable, and wire for complete and reliable installation. Obtain Owner’s
approval for exact location of cameras, boxes, conduit, cable, and wiring runs prior to
installation.
3.
Install conduit, cable, and wire parallel and square with building lines, including raised
floor areas. Do not exceed 40 percent fill in conduits. Gather and tie wires for orderly
installation.
4.
Coordinate with other trades to provide proper sequencing of installation.
FIELD COMMISSIONING AND CERTIFICATION
A.
3.4
Guide Specifications in CSI Format
800-23260 Rev A
Field Commissioning: Test camera system as recommended by manufacturer, including the
following:
1.
Conduct complete inspection and testing of equipment, including verification of
operation with connected equipment.
2.
Test devices and demonstrate operational features for Owner’s representative and
authorities having jurisdiction, as applicable.
3.
Correct deficiencies until satisfactory results are obtained.
4.
Submit written copies of test results.
TRAINING
A.
Conduct on-site system administrator and security/surveillance operator training in
accordance with the manufacturer’s instructions and recommendations. Training shall
include, but not be limited to: camera administration, provisioning, configuration, operation,
and diagnostics.
END OF SECTION
28 23 29-12
Download PDF
Similar pages