Fiber Optic Mode Converter/Repeater Model

Model
TC3004
“MAXI” Fiber Optic
Mode Converter/Repeater
• Converts Multimode to Single Mode
(and vice versa)
• Data Rates up to 622 Mbps
• Distances up to 100km
• Repeats Multimode and Single Mode
Signals
TC3004 Stand Alone
• Local & Remote Loopback
• Local Dry Contact Alarm Relay
• 8 Diagnostic LED Indicators
• Built-In Redundant Power Supply
• Two-way Single Fiber Communication
(option, single mode)
• Test Signal Generator (optional)
TC3004 Rackmount
T
he TC3004 “MAXI” Multimode-to-Single Mode Fiber Optic Converter
converts multimode formats to single mode formats, or vice versa, for data
transmission up to 622 Mbps. Transmission distances to more than 100km are
possible with the Laser 1550nm option (34dB loss budget).
The MAXI will convert or repeat wavelengths 1300nm Multimode or
1300/1550nm Single Mode. It is compatible with all popular communication
technologies including Ethernet, Token Ring, TAXI, OC1/OC3, ATM, FDDI and
SONET.
The MAXI provides users with several key features including Local &
Remote Loopback, a Test Signal Generator, Dry Contact Relay Alarm, Audible
Alarm Buzzer, Power Redundancy, and standalone or rackmount modularity.
The Test Signal Generator and Dry Contact Alarm are particularly beneficial. The Signal Generator (160 Mbps) helps technicians conduct various
installation tests including fiber link verifications. The Dry Contact Alarm Relay,
which includes an audible alarm buzzer, identifies Optical Signal Loss on
either the multimode or single mode ends.
Applications
The MAXI Mode Converter is used
to convert multimode to single mode,
or vice versa, in a variety of LAN
and Telephony communication
environments including PABX,
Ethernet, Token Ring, FDDI, ATM &
SONET (OC1 & OC3). This conversion is done to cross-connect
different fiber types, regenerate
optical signals and/or extend transmission distances.
Power redundancy is load sharing and switches over automatically in the
event of a failure. Power can be either 12VDC (standard), 24VDC, -48VDC, or
115/230VAC with an external power cube. Standalone versions are modular,
i.e. used either in a standalone case or in a rackmount assembly. Standard
connectors are SC, ST or FC type.
Four DIP switches and eight LED indicators are provided to help installation
and troubleshooting. A hardened temperature version (-20°C to 70°C), Model
TC3005T, is also available.
TC Communications, Inc.
17881 Cartwright Rd. Irvine, CA 92614 U.S.A.
Tel: (949) 852-1972, Fax: (949) 852-1948
Sales: (800) 569-4736
Web Site: www.tccomm.com
E-mail: sales@tccomm.com
LAN/WAN
100Mbps
Ethernet Switch
1300nm Multimode or
1300/1550nm Single Mode
ATM Switch
or Router
Typical applications using TC3004 Fiber Optic Mode Converter/Repeaters
A terminal block connector on
the TC3004 rear panel provides
for the dry contact relay alarm.
Normally in the OPEN position,
any loss of optical signal will
trigger an alarm condition and
force the switch to the CLOSED
position. This relay can be
used in conjunction with an
external device to monitor the
condition of the link.
Visual Indicators
Data Rates
.....................................up to 622 Mbps .............PWRA, PWRB, VCCA, VCCB,
..........MM RX, MM TX, SM RX, SM TX
Optical
Transmitter......................ELED/LASER Alarm
Receiver................................PIN Diode Dry Contact....................Normal OPEN
Wavelength
Power
................................1300nm Multimode
Standard..........12VDC @800mA (max)
....................1300/1550nm Single Mode
Optional................24VDC, -48VDC, or
Fiber Optic Connectors ........................
...............115/230VAC with power cube
SM .................................. SC, ST, FC
MM ........................................ SC, ST Temperature
Operating ..................... -10°C to 50°C
Loss Budgets*
LED .............................16dB 1300nm Hi-Temp (optional) ....... -20°C to 70°C
Storage.......................... -40°C to 90°C
Multimode @62.5/125 nm
Humidity
.............95% non-condensing
ELED ..................16dB 1300/1550nm
Single Mode @9/125 nm
LASER ...........00.........25dB 1300nm
Single Mode @9/125 nm
HI-PWR LASER...4dB 1300/1550nm
Single Mode @9/125 nm
Physical (Standalone Unit)
Height...........................(3.53 cm) 1.39"
Width..........................(18.13 cm) 7.14"
Depth..........................(16.59 cm) 6.53"
Weight.........................(512 gm) 1.5 lbs
*Any two wavelengths are available on each unit
System
10
Bit Error Rate ............1 in 10 or better
Note - Information contained in this data sheet is subject to change without prior notice. 010B
®
#1045959
TC Communications, Inc.
17881 Cartwright Road
Irvine, CA 92614 U.S.A.
Factory Tel: (949) 852-1972
Fax: (949) 852-1948
Sales Office
U.S.A. Domestic International
(800) 569-4736
(949) 852-1973
Web Site: www.tccomm.com
E-mail: sales@tccomm.com
9/09
Download PDF
Similar pages