Fast Ethernet 100BASE-TX to 100BASE-FX

Table of Contents
Select Media Converter
Select Switch
This electronic version of Transition's 2007 catalog can be navigated using a
combination of the bookmarks on the left and the navigation buttons at the top of
each page.
Request a New 2007 Printed Catalog
YOUR NETWORK
ENTERPRISE
GOV / ED
RETAIL
SERVICE PROVIDER
INDUSTRIAL
VIDEO
OUR SOLUTIONS
MEDIA CONVERSION
SWITCHING
CONNECTIVITY
AGGREGATION
Product Catalog 2007
Table of Contents
Select Media Converter
Select Switch
Corporate Overview
Founded in 1987 as Transition Engineering, the
company's first products adapted coaxial cable
to twisted-pair cables; connecting terminals to
mainframe computers. The company was
renamed Transition Networks, Inc. in 1995 and
experienced continued rapid growth as its
products evolved from general Ethernet
networking equipment to a complete line of
conversion technology solutions. In 1998,
Transition Networks was purchased by
Communication Systems, Inc, (AMEX: JCS).
Today, Transition Networks, Inc. offers a full
suite of networking connectivity solutions that
make networks perform better, faster and more
reliably while helping companies leverage their
existing networking infrastructure. The
company’s Transition Networks brand of media
converters makes conversion between disparate
media types possible; providing conversion
technology solutions that offer the necessary
adaptations without affecting the performance,
nature or appearance of the network. These
media conversion technologies are offered
across a broad spectrum of networking
protocols including Ethernet, Fast Ethernet,
Gigabit, T1/E1, DS3, ATM, RS232/485, video,
power over Ethernet, and many more. Transition
Networks offers its products in chassis, stand
alone, and PCI form factors. Our devices are
SNMP manageable and can be managed via our
graphical interface Focal Point, web browser, or
command line interface.
In the fall of 2005, Communication Systems, Inc.
announced the integration of MILAN
Technologies into Transition Networks. This
integration expanded the Transition Networks
product portfolio to include a complete line of
MILAN branded multilayer switches. The MILAN
switch products are designed to facilitate lowcost network evolution with unique solutions;
easing the stress on networks caused by highbandwidth applications.
Based in Minneapolis, Transition Networks
distributes
hardware-based
connectivity
solutions exclusively through a network of
resellers in more than 100 countries.
<2>
Call us at 800-526-9267 or 952-941-7600
Market Opportunity
Why Transition Networks?
Computer networks have evolved into an
indispensable asset for corporations around the
world. These complex systems of cables, jacks,
patch panels, switches, routers, and servers
provide the foundation for the communications
of our global economy. Many corporations view
their networks as a strategic advantage over
their competition and focus on constant
improvement in performance of their networks.
Free Worldwide Technical Support
While network managers yearn for the latest
equipment and higher speeds, budgetary
restrictions impose limitations and precipitate a
less than homogenous network. Inevitably,
network administrators must contend with a
variety of protocols, speeds, and media in their
networks. Media conversion technology was
developed to address these problems and has
evolved from a stop gap technology into a
technology that offers network administrators
new choices for deploying fiber optics into their
networks cost effectively.
Conversion technology enables network
evolution, allowing network planners to migrate
to new technologies without overhauling
existing infrastructure investments or being
locked into less flexible and more expensive
networking equipment. Fiber provides the
distance and bandwidth capability needed for the
network backbone, making it the core
technology for network evolution.
Transition Networks leverages its expertise in
fiber and physical connectivity into a full suite of
product offerings unmatched by other industry
players. Our products are used by a wide variety
of customers including enterprise, government,
education, retail, industrial, security, and service
providers.
Product Quality
Transition Networks’ conversion products are
known for their ruggedness and reliability. They
have a 99.4 percent customer acceptance rating,
meaning that approximately one in 1,000
experience failure in the field. All Transition
Networks brand of media converters carry a
lifetime warranty.
MILAN by Transition
Networks offers a five-year warranty on wired
products.
For further information call 800-526-9267 or
+1-952-941-7600, or visit the Web site at
www.transition.com.
via the web or telephone
Built to Perfection
99.4% of Transition Networks’s products
are delivered without functional failure
ISO 9001 2000
Quality System Certified
ISO 14001
Environmental Certification
Lifetime Warranty
on all Transition Networks brand products
(including power supply and fan)
100% Channel
100% of Transition Networks’s products are
distributed exclusively through the channel
Transition NOW
• “Chat” Live via the Web
• Free Live Web-based training
with 12 – 16 seminars per month
Media Converters by Network Type
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
Network Type
Product Number
Description
Product Type
Ethernet
Ethernet
Ethernet
Ethernet
Ethernet
Power Over Ethernet
Ethernet or Token Ring
Ethernet or Fast Ethernet
Ethernet or Fast Ethernet
Fast Ethernet
Fast Ethernet
Fast Ethernet
Fast Ethernet
Fast Ethernet
Fast Ethernet
Fast Ethernet
Power Over Fast Ethernet
Fast Ethernet or ATM
Fast Ethernet or ATM
10/100
10/100
10/100
10/100
10/100 Bridging
10/100 Bridging
10/100 Bridging
10/100 Bridging
10/100 Bridging
10/100 Bridging
10/100 Bridging
10/100 Bridging
10/100 Bridging - PoE
10/100 Bridging - PoE
10/100 Bridging Industrial
10/100 Bridging Industrial
10/100 Bridging Industrial
10/100 Bridging Industrial
10/100 Bridging Industrial
100/1000 Bridging
10/100/1000 Ethernet
10/100/1000 Ethernet
10/100/1000 Bridging
10/100/1000 Bridging
10/100/1000 Bridging
10/100/1000 Bridging
1000 Bridging
Gigabit Ethernet
Gigabit Ethernet
Gigabit Ethernet
Gigabit Ethernet
Gigabit Ethernet
Gigabit Ethernet
Gigabit Ethernet
Gigabit Ethernet
Gigabit Ethernet
Gigabit Ethernet
Gigabit Ethernet
Gigabit Ethernet
Gigabit Ethernet
Gigabit Ethernet
Protocol Independent
Protocol Independent
ATM/OC-X
ATM/OC-X
ATM/OC-X
STM/OC-3
DS3-E3/T3
DS3-E3/T3
High Speed Serial
High Speed Serial
RS232
RS232
RS232
RS232 Industrial
RS232/422/485
RS422/485
RS422/485
RS422/485 Industrial
T1/E1
T1/E1
4x T1/E1/J1
4x T1/E1/J1
4x T1/E1/J1 + 10/100 Ethernet
4x T1/E1/J1 + 10/100 Ethernet
E&M, 2/4-wire
POTS 2-wire
POTS 2-wire
Analog Video
Analog Video
Analog Video
Analog Video
CETTF10xx-x0x
E-TBT-FRL-05(xxxx)
E-TBT-FRL-Nxx-01(xx)
J/E-CF-02(xx)
J/E-CX-TBT-02
SEPOE101x-150
F-SM-MM-05
CSEFE10xx-10x
SSEFE10xx-10x
CFETF101x-105
CFETF10xx-2xx
CRMFE10xx-20x
E-100BTX-FX-05(xxxx)
E-100BTX-FX-Nxx-01(xx)
J/FE-CF-03(xx)
SRMFE10xx-20x
SFEPE101x-1x0
CFMFF1xxx-20x
F-SM-MM-02 or SFMFF1x29-20x
CBFTF1010-130
SBFTF1010-130
CSETF101x-205
SSETF101x-205
CFBRM10xx-1xx
SFBRM10xx-1xx
SFBRM10xx-18x
MIL-FT240TX
CBFTF10xx-1xx
SBFTF10xx-xxx
J/E-PSW-FX-02(xx)
Mx/E-PSW-FX-01(xx)
SPOEB10xx-100
J/POE-CF-01(xx)
SISTF101x-111-LRx
SISTF101x-141-LRx
SISTF1010-1x0-LRx
SIBTF10xx-1xx-Mx
SISTM101x-1xx-LRx
CFBRM13xx-1xx
CGFEB10xx-1xx
SGFEB10xx-10x
CBFFG10xx-1xx
SBFFG10xx-1xx
CMEFG10xx-11x
SMEFG10xx-1xx
SFBRM13xx-1xx
1000MCC-1
CCH-MCMxx-xx-xxx
CFMFF1xxx-22x
CBFFG13xx-1xx
SBFFG13xx-1xx
CFMFF13xx-28x
CGETF10xx-11x
J/GE-CF-01(xxx)
SFMFF1xxx-22x
SFMFF13xx-28x
SGETF10xx-110
TN-GB-xM5
TN-SFP-xxx
TN-SFP-xxx-Cxx
CFMFF040-100
SFMFF040-100
CFMFF1xxx-21x
F-SM-MM-06(xx)
SFMFF131x-210
SSTM1EOxx
CCSCF30xx-10x
SCSCF30xx-10x
CPSVT26xx-10x
SPSVT26xx-10x
CRS2F311x-100
SRS2F311x-100
J/RS232-xF-01(xx)
SDSFE311x-100
SDSFE311x-120
CRS4F3x1x-100
SRS4F3x1x-100
SDSFE321x-110
CSDTFx0xx-1xx
SSDTFx0xx-1xx
C4TEF10xx-10x
S4TEF10xx-10x
C4TEF10xx-11x
S4TEF10xx-11x
CEMTF10xx-10x
CAPTF33xx-1xx
SAPTF33xx-1xx
CVIDF20xx-15x
CVIDF201x-110
J/VD-xX-01
SVIDF201x-xxx
10BASE-T to 10BASE-FL MM or SM
10BASE-T to 10BASE-FL MM or SM
10BASE-T to 10BASE-FL MM
10BASE-T to 10BASE-FL MM - Just Convert-IT™
10BASE-T to 10BASE2 - Just Convert IT™
10BASE-T to 10BASE-FL MM or SM
MM to SM
10BASE-T to 10BASE-FL or 100BASE-TX to 100BASE-FX
10BASE-T to 10BASE-FL or 100BASE-TX to 100BASE-FX
100BASE-TX to 100BASE-FX MM or SM Class A
100BASE-TX to 100BASE-FX MM or SM Class B
100BASE-TX to 100BASE-FX MM or SM with Remote Mgmt.
100BASE-TX to 100BASE-FX MM or SM
100BASE-TX to 100BASE-FX MM or SM
100BASE-TX to 100BASE-FX MM or SM - Just Convert-IT™
100BASE-TX to 100BASE-FX MM or SM with Remote Mgmt.
100BASE-TX to MM or SM
MM to SM
MM to SM
10/100BASE-TX Redundant Link Protector
10/100BASE-TX Redundant Link Protector
10/100BASE-TX to 10/100BASE-SX MM
10/100BASE-TX to 10/100BASE-SX MM
10/100BASE-TX to 100BASE-X MM or SM
10/100BASE-TX to 100BASE-X MM or SM
10/100BASE-TX to 100BASE-X MM or SM
10/100BASE-TX Port Selector Transceiver
10/100BASE-TX to 100BASE-FX MM or SM
10/100BASE-TX to 100BASE-FX MM or SM
10/100BASE-TX to 100BASE-FX MM or SM - Just Convert-IT™
10/100BASE-TX to 100BASE-FX MM or SM
10/100BASE-TX to 100BASE-FX MM or SM
10/100BASE-TX to 100BASE-FX MM or SM - Just Convert-IT™
10/100BASE-TX to 100BASE-FX MM or SM
(4) 10/100BASE-TX to (1) 100BASE-FX MM or SM
(5) 10/100BASE-TX or (8) 10/100BASE-TX
(1), (3) or (4) 10/100BASE-TX to (1) or (2) 100BASE-FX MM or SM
(8) or (6) 10/100BASE-TX to (2) 100BASE-FX
100BASE-FX to 1000BASE-X MM or SM
10/100/1000BASE-TX to 1000BASE-SX/LX MM or SM
10/100/1000BASE-TX to 1000BASE-SX/LX MM or SM
10/100/1000BASE-TX to 1000BASE-X
10/100/1000base-T to 1000BASE-X
10/100/1000BASE-TX to 1000BASE-BX/SX/LX MM or SM
10/100/1000BASE-TX to 1000BASE-BX/SX/LX MM or SM
100BASE-FX to 1000BASE-X
SC
1000BASE-T to 1000BASE-SX MM
1000BASE-SX MM to 1000BASE-LX SM
1000BASE-X to 1000BASE-X
1000BASE-X to 1000BASE-X
1000BASE-SX MM to 1000BASE-LX SM retiming
1000BASE-T to 1000BASE-SX/LX MM or SM
1000BASE-T to 1000BASE-SX/LX MM or SM - Just Convert-IT™
1000BASE-SX MM to 1000BASE-LX SM
1000BASE-SX MM to 1000BASE-LX SM retiming
1000BASE-T to 1000BASE-SX/LX MM or SM
1000BASE-SX or LX
1000BASE-SX or LX
CWDM Wavelengths
(2) slots for SFP modules
(2) slots for SFP modules
MM to SM
MM to SM
MM to SM
(2) Mini BNC to MM or SM
(2) BNC to MM or SM
(2) BNC to MM or SM
26-pin to MM or SM
26-pin to MM or SM
DB9 to MM or SM
DB9 to MM or SM
DB9 to MM - Just Convert-IT™
DB9 to MM or SM
DB9 to RJ-45 or MM or SM
DB9 or Terminal Block to MM or SM
DB9 or Terminal Block to MM or SM
Terminal Block to MM or SM
(2) BNC or RJ-48 to MM or SM
(2) BNC or RJ-48 to MM or SM
(4) RJ-48 to MM or SM + 6-pin DIN
(4) RJ-48 to MM or SM + 6-pin DIN
(4) RJ-48 + (1) 10/100 RJ-45 to MM or SM + 6-pin DIN
(4) RJ-48 + (1) 10/100 RJ-45 to MM or SM + 6-pin DIN
Twisted Pair to MM or SM
Twisted Pair to MM or SM
Twisted Pair to MM or SM
BNC to MM or SM
BNC to MM or SM
BNC to MM or SM - Just Convert-IT™
Analog CCTV Video + Data: Transmitter and Receiver
Point System™ Chassis Card
Stand-Alone
PCI-Based
Stand-Alone
Stand-Alone
Stand-Alone
Stand-Alone
Point System™ Chassis Card
Stand-Alone
Point System™ Chassis Card
Point System™ Chassis Card
Point System™ Chassis Card
Stand-Alone
PCI-Based
Stand-Alone
Stand-Alone
Stand-Alone
Point System™ Chassis Card
Stand-Alone
Point System™ Chassis Card
Stand-Alone
Point System™ Chassis Card
Stand-Alone
Point System™ Chassis Card
Stand-Alone
Stand-Alone
Stand-Alone
Point System™ Chassis Card
Stand-Alone
Stand-Alone
Mini Stand-Alone
Stand-Alone
Stand-Alone
Industrial Stand-Alone Converter
Industrial Stand-Alone Redundant Switch
Industrial Stand-Alone Switch
Substation Industrial Switch
Industrial Stand-Alone Switch
Point System™ Chassis Card
Point System™ Chassis Card
Stand-Alone
Point System™ Chassis Card
Stand-Alone
Point System™ Chassis Card
Stand-Alone
Stand-Alone
Mode Conditioning Cable
Stand-Alone
Point System™ Chassis Card
Point System™ Chassis Card
Stand-Alone
Point System™ Chassis Card
Point System™ Chassis Card
Stand-Alone
Stand-Alone
Stand-Alone
Stand-Alone
GBIC Module
Small Form Factor Pluggable
Small Form Factor Pluggable
Point System™ Chassis Card
Stand-Alone
Point System™ Chassis Card
Stand-Alone
Stand-Alone
Stand-Alone
Point System™ Chassis Card
Stand-Alone
Point System™ Chassis Card
Stand-Alone
Point System™ Chassis Card
Stand-Alone
Stand-Alone
Industrial Device Server
Stand-Alone Device Server
Point System™ Chassis Card
Stand-Alone
Industrial Device Server
Point System™ Chassis Card
Stand-Alone
Point System™ Chassis Card
Stand-Alone
Point System™ Chassis Card
Stand-Alone
Point System™ Chassis Card
Point System™ Chassis Card
Stand-Alone
Point System™ Chassis Card
Point System™ Chassis Card
Stand-Alone
Stand-Alone
Table of Contents
Select Media Converter
Select Switch
Page
33
74 – 75
133
77
76
78
79
34
80
35
36
37
81 – 82
133
83
84
86
38
85
42
92
39
87
40
88
89
91
43 – 46
93 – 95
96
99
97
98
124
125
126
128
127
41
47 – 48
100
49
101
51
103
90
55
108
53
50
102
54
52
105
106
107
104
134
135
136
56
109
57
111
111
110
58
112
59
113
60
114
115
129
130
61
116
131
62 – 63
117 – 118
64
119
65
120
66
67
121
68
69
122
123
<3>
Table of Contents
Select Media Converter
Select Switch
Switch Selection Table
Transition Networks offers a large selection of MILAN switches to meeting your networking needs including fully managed switches in a
wide range of port counts. Below is a matrix of switches with their corresponding features to help you select the switch that best meets
your needs.
Gigabit
Fast Ethernet
Click on switch part
number to go to that
product page.
To view a definition of a feature,
place your cursor over the
question mark.
Feature/Protocol
SM801x
SM2401M-STK
SM4804G
SM8002TG
SM24004TG
page
144 & 145
147
151
152
153
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
L2/L3
Yes
Yes
Yes
Yes
Security Features
?
802.1Q VLANs
?
802.1x Authentication
?
L2/L3/L4 ACLs
?
MAC-based Security
?
Private VLANs
RADIUS Authentication
(Management)
?
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
?
SSH
Yes
Yes
?
SSL
Yes
Yes
?
TACACS+ Authentication
(Management)
Yes
Yes
Network Performance Features
?
802.1p Prioritization
?
Bandwidth Provisioning
?
CoS Queues Per Port
?
IPToS
?
LACP
?
RSTP
?
STP
?
TCP/UDP Port Prioritization
?
WFQ
Yes
2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
2
4
4
8
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Management & Monitoring Features
?
Command Line Interface
Yes
Yes
Yes
Yes
?
DHCP Client
Yes
Yes
Yes
Yes
?
DSCP Remark
?
Event log
Yes
Yes
?
Port Labeling
Yes
?
RMON
Yes
Yes
Yes
Yes
Yes
?
SNMPv1
Yes
Yes
Yes
Yes
Yes
?
SNMPv2
Yes
Yes
Yes
Yes
?
SNMPv3
?
SNTP
?
Telnet
TFTP download/upload
?
?
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Web-based Management
General Features
<4>
?
Auto MDI / MDI-X
Yes
Yes
Yes
Yes
Yes
?
Auto-Negotiation
Yes
Yes
Yes
Yes
Yes
?
Flow Control
Yes
Yes
Yes
Yes
Yes
?
GVRP
Yes
Yes
Yes
Yes
Yes
?
IGMP Query Mode
Yes
Yes
Yes
Yes
Yes
?
IGMP Snooping
Yes
Yes
Yes
Yes
Yes
?
IP Stacking
?
Jumbo Frames
Yes
Hardware Stacking
Yes
Yes
Yes
?
?
MAC Table Size
8K
8K
8K
8K
16K
?
Max Static VLANs
255
255
255
255
255
?
Port Trunking
Yes
Yes
Yes
Yes
Yes
?
SPF
?
Static MAC Entry
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Table of Contents
Select Media Converter
Select Switch
Table of Contents
What’s New?
100/1000 Bridging Media Converter . . . . . . . . . . . . . . . .41
10/100BASE-TX Redundant Link Protector . . . . . . . . . . .42
Value 10/100 Bridging Media Converter . . . . . . . . . . . . .46
OAM/IP-Based Remotely Managed Media Converters . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .49, 50, 89, 90, 101 & 102
Gigabit Ethernet Media Converter . . . . . . . . . . . . . . . . . .52
Analog CCTV Video + Data Receiver . . . . . . . . . . .69 & 123
4-Slot Media Converter Shelf . . . . . . . . . . . . . . . . . . . . .71
Twisted Pair to Coax Media Converter . . . . . . . . . . . . . . .76
Fault-Tolerant Redundant Media Converter . . . . . . . . . . .91
Fault-Tolerant Redundant Link Protector . . . . . . . . . . . . .92
Conversion Technology Products
Point System™ Platform . . . . . . .20 – 31
Point System™ Chassis
Specifications . . . . . . . . . . . . . .20 – 21
Point System™ Features . . . . . .22 – 23
SNMP Management
Platform . . . . . . . . . . . . . . . . . .24 – 31
Plug-n-Play Universal Module System . . . . . . . . . . . . .108
STM-1/OC-3 Media Conversion . . . . . . . . . . . . . . . . . . .110
Industrial Media Converters . . . . . . . . . . . . . . . . . . . . .124
Industrial Switches . . . . . . . . . . . . . . . . . . . . . . .125 & 126
Managed Redundant Industrial Switch . . . . . . . . . . . . .127
Ethernet AUI to RJ-45 Transceiver . . . . . . . . . . . . . . . .132
Small Form Factor Pluggables CWDM Wavelengths . . .136
Course Wavelength Division Multiplexing (CWDM) . . .137
8-port 100BASE-FX Managed Switch . . . . . . . . . . . . . .146
Power Over Ethernet (PoE) Switches . . . . . . . . .148 & 149
Click on any
description or page
number to go to that
product page.
Media Conversion Solutions
Enterprise . . . . . . . . . . . . . . . . . . . . . . . .7
Government / Education . . . . . . . . . . . .8
Industrial . . . . . . . . . . . . . . . . . . . . . . . .9
Retail . . . . . . . . . . . . . . . . . . . . . . . . . .10
Service Provider . . . . . . . . . . . . .11 – 12
Video . . . . . . . . . . . . . . . . . . . . . . . . . .13
Advanced Features
Auto-Negotiation . . . . . . . . . . . . . . . . .14
AutoCross™ . . . . . . . . . . . . . . . . . . . . .14
Far End Fault . . . . . . . . . . . . . . . . . . . .14
Link Pass Through . . . . . . . . . . . . . . . .15
Transparent Link Pass Through . . . . . .15
Pause . . . . . . . . . . . . . . . . . . . . . . . . . .15
Remote Management . . . . . . . . . . . . . .15
Automatic Link Restoration . . . . . . . . .16
Loopback . . . . . . . . . . . . . . . . . . . . . . .16
Bandwidth Allocation . . . . . . . . . . . . . .16
Remote Firmware Upgrade . . . . . . . . .16
Source Address Change . . . . . . . . . . . .17
Last Gasp . . . . . . . . . . . . . . . . . . . . . . .17
Single Fiber . . . . . . . . . . . . . . . . . . . . .17
Remote Fault Detect . . . . . . . . . . . . . . .17
Advanced Certification
NEBS . . . . . . . . . . . . . . . . . . . . . . . . . .18
ROHS Compliance . . . . . . . . . . . . . . . .18
Waste Electronic Equipment (WEE) . . .18
Environmental Stewardship . . . . . . . . .18
CISPR Class B . . . . . . . . . . . . . . . . . . .18
FCC Class A & B . . . . . . . . . . . . . . . . .18
Point System™ Slide-In-Module Media
Converters . . . . . . . . . . . . . . . . . .32 – 69
Point System™ Part Number Key . . .32
Ethernet . . . . . . . . . . . . . . . . . .33 – 35
Fast Ethernet . . . . . . . . . . . . . . .35 – 38
10/100 . . . . . . . . . . . . . . . . . . . . . . .39
100/1000 Bridging . . . . . . . . . . . . . .41
10/100 Bridging . . . . . . . . . . . .40 – 46
10/100/1000 Ethernet . . . . . . . 47 – 48
10/100/1000 Bridging . . . . . . . . . . . .49
Gigabit Ethernet . . . . . . . . . . . .50 – 55
Optical Line Conversion . . . . . . . . . .56
ATM / OC-X . . . . . . . . . . . . . . . . . . . .57
DS3/T3/E3 . . . . . . . . . . . . . . . . . . . . .58
High Speed Serial . . . . . . . . . . . . . . .59
RS232 . . . . . . . . . . . . . . . . . . . . . . . .60
RS422/485 . . . . . . . . . . . . . . . . . . . .61
T1/E1 . . . . . . . . . . . . . . . . . . . .62 – 65
E&M, 2/4-wire . . . . . . . . . . . . . . . . . .66
POTS, 2-wire . . . . . . . . . . . . . . . . . . .67
Analog CCTV Video . . . . . . . . . .68 – 69
Stand-Alone Media Converters
. . . . . . . . . . . . . . . . . . . . . . . . .70 – 123
PCI Media Converters . . . . . . . . . . . .133
GBIC Modules . . . . . . . . . . . . . . . . . .134
Small Form Factor Pluggables
. . . . . . . . . . . . . . . . . . . . . . . .135 – 136
Course Wavelength Division Multiplexing
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
Connectivity Products
Network Interface Cards . . . . .138 – 141
PCMCIA Adapter Cards . . . . . . . . . . .142
Switching Solutions
Managed Switches . . . . . . . . . .143 – 153
Unmanaged Switches . . . . . . .154 – 162
PoE Injectors & Splitters . . . . . . . . . .163
Networking Cables
Patch Cords . . . . . . . . . . . . . . .164 – 165
Reference
Fiber Optic Guide . . . . . . . . . . .166 – 167
Switching Glossary . . . . . . . . .168 – 169
Industrial Test Levels . . . . . . . . . . . . .170
Fiber Optic Connector Specs . .171 – 181
Product Number Index . . . . . .182 – 188
Mounting Options . . . . . . . . . . .70 – 71
Wide Input Power Supplies . . . . . . .72
Just Convert-IT™ . . . . . . . . . . . . . . .73
Ethernet . . . . . . . . . . . . . . . . . .74 – 80
Fast Ethernet . . . . . . . . . . . . . . .81 – 86
10/100 . . . . . . . . . . . . . . . . . . . . . . .87
10/100 Bridging . . . . . . . . . . . .88 – 99
10/100/1000 Ethernet . . . . . . . . . . .100
10/100/1000 Bridging . . . . . .101 – 103
Gigabit Ethernet . . . . . . . . . .104 – 106
Optical Line Conversion . . . .107 – 109
ATM / OC-X . . . . . . . . . . . . . .110 – 111
DS3/T3/E3 . . . . . . . . . . . . . . . . . . . .112
High Speed Serial . . . . . . . . . . . . . .113
RS232 . . . . . . . . . . . . . . . . . .114 – 115
RS422/485 . . . . . . . . . . . . . . . . . . .116
T1/E1 . . . . . . . . . . . . . . . . . .117 – 120
POTS, 2-wire . . . . . . . . . . . . . . . . . .121
Analog CCTV Video . . . . . . . .122 – 123
Industrial Media Converters . . .124 – 127
Substation Industrial Switches . . . . .128
Industrial Device Servers . . . . .129 – 131
Call us at 800-526-9267 or 952-941-7600
<5>
Table of Contents
Select Media Converter
Select Switch
Media Conversion Solutions
Transition Networks offers the widest variety of media conversion solutions for network extension. Our solutions
section explores some typical applications that illustrate how our products can be utilized in your network.
What is Media Conversion?
Put simply, media converters transparently connect one type of media, or cabling,
to another—for example: copper to fiber.
Media converters allow the use of fiber where and when it is needed; effectively
integrating new equipment into your existing cabling network. This gives the
network administrator power to:
Extend the lifespan of existing non-fiber based equipment
Extend the distance of an existing network
Extend the distance between two like devices
fiber optic
Integrate data and telecommunication networks over fiber
copper
Click on a solution
to go to that page.
Enterprise Applications
Internal LAN Deployments
Campus Deployments
Metro Area Networks
Page 7
Government / Education Applications
Internal LAN Deployments
Campus Deployments
Page 8
Industrial Applications
Factory Floor Deployments
Extended Temperature Applications
Page 9
Retail Applications
Large Warehouse Retail Applications
Internal LAN Deployments
Page 10
Traditional Voice & Data Applications
Data Solutions
Cell Tower Applications
DSL Backhaul Applications
POTS Applications
Page 11
Service Provider Applications
Internet Services
Transparent LAN Services
Page 12
Video Applications
Analog Video
IP Video
Page 13
<6>
Visit our website at www.transition.com
media conversion
solutions for
Enterprise Applications
Table of Contents
Select Media Converter
Select Switch
enterprise
Use
Media Converters for Internal LAN Deployments
Connect enterprise switches to a
fiber backbone running up the
vertical risers in a multi story
office building
Connect legacy workgroup copper
switches with copper interfaces to
a fiber backbone.
Use
gov / ed
industrial
retail
service provider
video
Media Converters in Campus Deployments
Connect multiple buildings on your
campus using media converters to
convert copper interfaces to fiber;
maximizing efficiencies and saving
money
Use T1/E1 media converters to
connect PBXs over fiber between
departments
Enterprise level networks are the privately
owned networks within a business or
organization. Media converters are a costeffective solution to integrate different
media and equipment in today's less than
homogeneous network environments.
Media conversion technology offers
network administrators new choices for
deploying fiber optics into their networks
cost effectively.
Applications for media conversion
solutions:
Ease migration and flexibility
Simple to install and transparent to the
network, media converters allow for
network growth when and where you
need it.
Maximize rack space or real estate
using high-density conversion solutions
from Transition Networks.
Monitor and configure remote devices
with the SNMP management provided with
Transition's managed conversion solutions.
Use
Media Converters in Metro Area Networks
Connect offices located throughout
the metro. Companies can eliminate
or reduce the number of leased
lines required to connect offices
using long haul media converters.
The biggest advantage to this
configuration is that the companies
have created a network capable of
10 or 100 or 1000 Mbps speeds,
significantly faster than dial up or
T1 connections.
Maximize distance and savings using
media converters to convert to fiber
signaling.
Future proof your network using
media converters to support high speed
protocols.
Avoid EMI and security issues using
fiber optic technology.
Keep up with technology without forklift
upgrades using low cost media
conversion solutions.
Recommended Product Families
Use
MILAN POE Switches to connect and power WAPs & VOIP
Point System™ Chassis
Ethernet, Fast Ethernet and Gigabit
media converters
Long Haul Media Conversion Products
Call us at 800-526-9267 or 952-941-7600
<7>
media conversion
solutions for
Use
Government / Education Applications
Table of Contents
Select Media Converter
Select Switch
Media Converters in Education Applications
School District Headquarters
• Chassis based solution
• Use existing copper switch
• Hot swappable media converter
cards
• Redundant Power Supplies
• SNMP Management Module
Whether it's a an educational campus or a
government agency campus, a wide area
network operating at local area network
speeds can be a major contributor to the
success of any organization.
Each School
• Stand-Alone media converter to
receive fiber and connect to main
copper switch
• Optional remote management
• Chassis based converters may be
helpful if fiber is used within
individual schools
Traditionally, when organizations link
multiple buildings in their campuses they
would choose between dial-up and T1/E1
connections ranging in speeds from
56Kbps to 1.544Mbps. Compare this to
Ethernet with speeds from 10Mbps to
1000Mbps. Media converters can be used
to deploy fiber optic cable as a high-speed
backbone between buildings; providing a
campus environment with connections at
Ethernet speeds.
Media converters connect disparate
media types:
• Transparently connect coax, twisted
pair, and fiber cable
• Connect new technologies to legacy
systems
Fiber cable in the outside plant protects
Use
Media Converters in Government Applications
data from the negative effects of
electrical storms:
• On fiber, data travels as waves of light,
versus electrical pulses on copper cable
• Data can be corrupted and networks
can fail due to lightening strikes
• Government agencies will value the
security benefits of transmitting
sensitive data through unsecured areas
on fiber cable
An all-inclusive Ethernet network
provides communications at LAN
network speeds:
• 10Mbps, 100Mbps, and 1000Mbps
connections are significantly faster than
dial-up or T1/E1 connections
• Combine media converters, fiber cable,
and existing copper switches to create a
high-speed backbone between schools
Recommended Product
Families
Protect investments in RJ-45 based
Point System™ Chassis loaded with
copper networking equipment:
• Experience the benefits of fiber without
the expense of replacing copper-based
networking equipment
Ethernet media converters
Redundant Power Supplies for
Point System™ Chassis
SNMP Management Module
Fiber offers unlimited bandwidth
Stand-Alone Ethernet Media
possibilities:
• Future Proofing - Fiber can handle
tomorrow’s faster technologies
Converters
<8>
Visit our website at www.transition.com
media conversion
solutions for
Industrial Applications
Table of Contents
Select Media Converter
Select Switch
enterprise
Use
gov / ed
industrial
Media Converters for Industrial Applications
retail
service provider
video
Industrial Conversion Solutions from
Transition Networks:
Eliminate EMI concerns easily & affordably
by converting electrical signaling into fiber
optic signaling.
Extend the life of copper equipment and
avoid costly equipment upgrades.
Maximize efficiency and control by
using SNMP management to access
remote devices.
Future proof networks allowing
companies to keep up with technology
while keeping within budget.
Connect legacy equipment such as
PLCs and automation systems to high
speed networks.
Increase product uptime and reliability
by using Extended Temperature converters
in non-climate controlled environments.
Reduce quality issues using quality
converters from Transition Networks
backed by a lifetime warranty on all
Transition Networks brand products,
including power supplies.
Recommended Product Families
Extended Temperature Ethernet and
Fast Ethernet:
E-TBT-FRL-05(xxHT) and
E-100BTX-FX-05(xxHT)
High Speed Serial:
CPSVT26xx and SPSVT26xx
RS232 and RS485:
CRS2F3111, SRS2F3111, CRS4F3111 &
SRS4F3111
Industrial Media Converters
SISTF10xx-111
Industrial Unmanaged Switches
SISTF10xx-141
SISTF1010-150
SISTF1010-180
Industrial Managed Switches
SISTM10xx-162
SISTM1010-180
Device Servers
SDSFE3xxx-1xx
Substation Unmanaged Switches
SIBTF10xx-1xx
Call us at 800-526-9267 or 952-941-7600
<9>
media conversion
solutions for
Use
Retail Applications
Table of Contents
Select Media Converter
Select Switch
Media Converters in Retail Applications
Retail sales companies are seeing the
benefits of having state of the art
information technology systems in their
stores. Instant access to sales volumes
and inventory levels has allowed store
managers to control costs while ensuring
they have the right mix of products on their
shelves.
Large warehouse retailers in particular can
benefit from using media converters while
deploying fiber cabling to connect their
point of sale equipment, receiving dock
workstations, and printers back to the main
computer room over long transmission
distances.
Network signals can travel farther on
fiber optic cable than on twisted pair:
• 2 km on multimode
• 20 km on single mode
• Long haul options
for 40, 60, 80 & 120 km
Solutions requiring less equipment cost
less:
• Use fiber to create direct links between
the main computer room and the end
stations
• Reduce the number of communication
closets required with a copper solution
Media converters allow fiber to be
deployed into twisted pair networks:
• Protect investments made in UTP
based hubs and switches
• Copper switches cost less than their
fiber equivalents
Recommended Product
Families
Savings of 40% are often realized with
the installation of copper switches and
media converters versus an all fiber
solution.
Point System™ Chassis loaded with
Ethernet media converters, a
redundant power supply, and a
management module
POE switches allow for centralized and
managed power distribution and backup.
Stand-Alone Ethernet media
Low port count switches connect
converters
multiple devices over fiber in a very
cost-effective manner.
Chassis Based Solution in Main Computer
Room
Hot swappable media converters
Redundant Power Supplies
SNMP Management
Stand-Alone Converters at the End
Stations
Optional remote management
Allows use of copper NIC's
Wall mount brackets are available
< 10 >
Visit our website at www.transition.com
media conversion
solutions for
Traditional Voice & Data Applications
T1/E1, ATM, V.35/X.21/RS530, POTS, E&M
Use
Table of Contents
Select Media Converter
Select Switch
Media Converters for Data Solutions
enterprise
gov / ed
industrial
retail
service provider
video
T1/E1 converters offer remote end
management to assist in troubleshooting
without sending a technician to the
remote site.
Loopback allows the network to be fully
tested during installation and assist in
troubleshooting the network.
Media converters allow service providers
to deploy traditional voice and data
solutions to customers.
Chassis-based Solution in Data Center:
Hot-swappable converters
Power Supplies:
Use
Media Converters in DSL Backhaul Applications
OC3, V.35, IP DSLAM Backhaul
applications
• AC
• 48VDC
• Redundant power
• Hot-swappable
SNMP Management
NEBS Compliance
Stand-alone Devices used for Customer
Premise Equipment:
Low Cost
Use
Media Converters in Cell Tower Applications
Use Transition Networks OC12 single
mode to multimode converters to
connect remote cell towers.
Use
Ease of Installation
Remote Management available for many
protocols
Media Converters in POTS Applications
Transition Networks POTS converters
allow fiber to be deployed where
lightening strikes may cause network
outages.
4x T1/E1, 10/100 Ethernet & RS232 Fiber Mux
Use 4x T1/E1 converters to transport
multiple T1/E1 lines and RS232 data
channel over one fiber.
Monitor local & remote end device
Configure remote devices using in-
bound management
Troubleshoot the segment using
Loopback and channel monitor port
Call us at 800-526-9267 or 952-941-7600
< 11 >
ethernet
media conversion
solutions for
Service Providers
Table of Contents
Select Media Converter
Select Switch
Use
Media Converters for Internet Services
Data Delivery in multi-tenant dwellings
802.1P provisions traffic to packet
order sensitive data such as VoIP and
video
Ethernet Solutions
The simplicity, ease of use, and low costs
have made Ethernet an excellent option for
many service providers that are offering
data solutions. Media converters are a
perfect choice for last mile delivery, back
haul applications and any network
extension need.
Spanning tree offers network
redundancy for customers
Redundant links for mission critical
applications
Remote Management
Upstream and downstream bandwidth
control allows service providers to
offer an array of services
10Mbps, 100, 10/100, 1000,
10/100/1000Mbps media converters
Remote Loopback assists in
diagnosing network problems
Reduce fiber strand counts with MILAN
switching solutions
Use
Media Converters for Transparent LAN Services
Connect remote locations to the main
office in Metropolitan Area Networks
Complete control of the equipment
with unified SNMP management on media
converters and switches
Modular chassis allow hardware to be
purchased when customers are acquired
Stand-alone devices offer a low cost,
easy to install CPE device
Remote Management helps
troubleshoot problems at remote
locations
Reach customers up to 125 km
(77.7 miles)
Physical LAN link established for
security data connections
Chassis-based Solution in Data Center
Hot-swappable converters
Power Supplies:
• AC
• 48VDC
• Redundant power
• Hot-swappable
SNMP Management
NEBS Compliance
Use
Media Converters in COs and as CPE devices in Ethernet
Access Networks
Provide cost-effective Ethernet services
to customer
Remotely monitor and manage devices
in-band
Provide different service levels using
Bandwidth Allocation
Easily troubleshoot the segment using
remote Loopback
< 12 >
Visit our website at www.transition.com
Video Surveillance Applications
media conversion
solutions for
Video Surveillance or Security over Fiber
enterprise
gov / ed
industrial
retail
Table of Contents
Select Media Converter
Select Switch
service provider
video
Analog
Video Networks
Transport analog video over fiber optic
cabling
Realize the improved bandwidth, quality
and transmission distance of fiber optics
Media converters available for:
Fixed analog cameras
PTZ analog cameras
Available in stand alone or chassis-
based form factors
Extended operating temperature for non-
temp controlled environments
IP
Video Networks
Cost-effectively integrate IP cameras into
your network with:
Industry-leading Ethernet Media
Conversion portfolio
Managed or un-managed
Chassis-based or stand-alone
Office-grade, extended temp or
industrial grade
Multi-layer managed and un-managed
Ethernet switches
Power-over-Ethernet (PoE) Media
Converters, injectors and switches
Enterprise-class 802.11g Wireless
Access Points and Adapters
Video security and surveillance are now
a corporate and government strategy
reality. Whether retailers are monitoring
for shoplifting or employee theft,
corporations identifying visitors and
employees or monitoring hazardous
work areas, governments and
municipalities combating street crime
and terrorism, casinos preventing
cheating and fraud or even homeowner’s
protecting their families and assets, one
cannot deny the benefits of an effective
video security system.
In the ever increasing reach of today’s
video security and surveillance systems,
many security professionals are finding
that the quality, bandwidth and distance
needed to perform even the most basic
surveillance is beyond the reach of
coaxial and UTP cabling, posing an
insurmountable hurdle when trying to
monitor the many outreach locations of
a typical surveillance installation.
IP-based video security systems are
limited to 100 meters (328 feet) or
less over UTP cabling infrastructure
Analog-based CCTV video security
systems are limited to 228 meters
(750 feet) or less over coaxial cabling
infrastructure
Video media conversion solutions from
Transition Networks can help you to:
Integrate fiber optic cabling into your
existing video surveillance network
Access existing fiber infrastructure to
transport video from established
surveillance network
Realize the benefits of fiber optic
cabling
Extend surveillance network reach
with increased video transport
distances of over 10km
Reduce video quality issues common
with UTP and coaxial cabling
Improved security of the closed video
system
Immunity to interference from high
voltages, EMI and RFI
Improved reliability and overall
transmission performance
Call us at 800-526-9267 or 952-941-7600
< 13 >
Table of Contents
Select Media Converter
Select Switch
Advanced Product Features
Auto-Negotiation
(802.3u)
Auto-Negotiation allows devices to perform automatic configuration to achieve the best possible mode of
operation over a link. Devices with this feature will broadcast their speed (10Mbps, 100Mbps, etc.) and
duplex (half/full) capabilities to other devices and negotiate the best mode of operation between the two
devices.
No user intervention required to determine best mode of operation
Optimal link established automatically
Quick and easy installation
While the inclusion of this feature is beneficial, the ability to disable it is equally beneficial. In the event of a
non-negotiating end device trying to connect to a negotiating device, the mode of operation will drop to the
least common denominator between the two devices (i.e. 100Mbps, half-duplex). Disabling this feature
gives the user the ability to force the connection to the best mode of operation when trying to link with a
non-negotiating device. Most Transition converters with Auto-Negotiation will allow you to disable this
feature.
AutoCross™
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X
configuration.
Eliminates an entire category of troubleshooting
No need to identify cable type—straight-through or crossover
No user intervention required to determine correct button / switch settings
If someone tells you media conversion
is a commodity product that anyone can
bring to market, they probably haven't
looked at the extensive product suite
offered by Transition Networks. With the
industry's most comprehensive offering
of full-featured products, Transition's
media converters stand out as "the
choice" among industry IT professionals.
Generally, media converters are low-level
OSI model devices with no IP or MAC
addresses and therefore are transparent
to the network. This "transparency"
makes them very inexpensive and easy
to use, but also can make
troubleshooting the network very
difficult. In an effort to overcome this
difficulty and to make media converters
"visible" to network managers, Transition
has designed their full-featured products
to include the most advanced features
on the market today, including:
• Auto-Negotiation
• AutoCross™
• Far End Fault
• Link Pass Through
Far
• Transparent Link Pass Through
End Fault (802.3u)
Far End Fault (FEF) is a troubleshooting feature that is generally used in conjunction with Link Pass Through
to notify both end devices of a loss of link. In the event of a loss of the fiber RX signal on the far end
converter the converter will automatically generate a Far End Fault signal and send it on its TX fiber port to
notify the near end converter of a fiber link loss. Link Pass Through will then disable the copper links on
both ends; alerting both end devices of network trouble (see diagram below).
Both end devices automatically notified of link loss
Prevents loss of valuable data unknowingly transmitted over invalid link
Allows for quick diagnosis and resolution of network problems
• Pause
• Remote Management
• Automatic Link Restoration
• Loopback
• Bandwidth Allocation
• Remote Firmware Upgrade
• Source Address Change
• Last Gasp
• Single Fiber Optics
Transition Networks’s media converters that include the FEF feature do not need to be used as pictured
above as they will work with other network devices that support Far End Fault per IEEE standards.
< 14 >
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
Advanced Product Features
advanced
features
certification
Link
Pass Through
Link Pass Through is a troubleshooting feature that prevents media converters from isolating link failures
and it allows end devices to be notified in the event of a loss of link. Link Pass Through provides the media
converter with the ability to monitor both the fiber and the copper RX ports for a loss of signal. If a loss of
RX signal occurs on one media port, the converter will automatically disable the TX signal on the other port.
By shutting down the fiber TX port, the link failure is “passed through” to the remote converter and device
(see diagram below).
End device automatically notified of link loss
Prevents loss of valuable data unknowingly transmitted over an invalid link
Pause
(IEEE 802.3xy)
PAUSE signaling is an IEEE feature that
temporarily suspends data transmission
between two devices in the event that
one of the devices becomes
overwhelmed. In the event that a device
needs some time to clear network
congestion, it will send out a PAUSE
signal to the other end device, which will
then wait a pre-determined amount of
time before re-transmitting the data.
Transition's converters will pass PAUSE
signaling unhindered; ensuring that the
message is delivered to the end device.
PAUSE enabled devices allowed to work
properly
Prevents loss of valuable data
transmission
Reduces bottlenecks and allows for
efficient use of network devices
Transparent
Link Pass Through
Transparent Link Pass Through will notify an end device of a link failure just like Link Pass Through,
however it uses a different method for “passing through” this information. Transparent Link Pass Through
sends a link-loss signal over the fiber, instructing the remote converter to shut down the copper port thus
notifying the end device, while maintaining the fiber link between the two converters (see diagram below).
End device automatically notified of link loss
Fiber link remains up as it carries a link-loss signal
PAUSE signaling is not standardized
over fiber media. Transition's media
converters will communicate this
signaling over fiber between the
converters to pass this signaling on to
the other end device.
Remote
Management
All chassis-based converters from
Transition Networks® can be managed
through SNMP. Now, select stand-alone
products can also be managed through
SNMP when used in conjunction with a
chassis based converter. While chassis
based products are generally placed in
the telecommunications room, standalone converters are generally placed in
remote locations away from network
administrators. Remote in-band
management over fiber allows
administrators access to the remote
device to check status and
enable/disable features or the device
itself.
Visibility of remote converters for
network administrators
Allows for centralized management of
media converters
Call us at 800-526-9267 or 952-941-7600
< 15 >
Table of Contents
Select Media Converter
Select Switch
Advanced Product Features
Automatic
Link Restoration
After a link failure condition has been corrected, Transition Networks's converters will automatically
re-establish link in all network conditions.
No need to reset devices
Transition Networks's converters will automatically re-establish link when connected to switches if
link was lost. With other manufacturers' converters the user must reset the converter to re-establish
the link.
Auto-Negotiation Enabled
Automatic Link Restoration allows the users to continue using Auto-Negotiation with Link Loss
Notification features. With other manufacturers' converters the user must disable Auto-Negotiation
and hard set the link.
Link Pass Through Activated in both directions
Automatic Link Restoration on Transition Networks's products allows users to continue using Link
Loss Notification feature activated in both directions. Many competitive solutions allow for Link Loss
Notification activation only in one direction. If Link Loss feature is activated in both directions,
competitive products are put in a "deadly embrace" and they cannot restore the link without resetting
the converters.
Bandwidth
Effectively manage bandwidth usage in
the network to support critical processes
or activities
Provide only the contracted amount of
bandwidth to paying customers
Provide only the bandwidth necessary
to end users
Remote
Loopback
Select Transition Networks products are equipped with Loopback. This feature puts a converter in a
special mode that enables the device to loop back the signal from the RX port to the TX port on
either media for testing and troubleshooting purposes. Test signals from a tester (Firebird, etc.) can
then be inserted into the link and looped back as received by a device to test a particular segment of
the link (i.e. copper or fiber). Loopback can be either local or remote depending on the location of the
converter in the link.
Allows network diagnostics from local or remote location
Quickly pinpoints problem areas of end to end link by testing a particular segment
Some converters have separate copper and fiber loopback functions that can be enabled separately,
while others will loopback both copper and fiber at the same time when enabled. Please refer to the
specific product page for details.
< 16 >
Visit our website at www.transition.com
Allocation
Bandwidth allocation is an important
feature found on select converters
which allows network administrators to
set the bandwidth of the converter in
64KB increments via SNMP
management. The bandwidth can be
allocated in any multiple of 64KB from
0Kb up to the full bandwidth capability
of the media converter and can be
entered in either KB or Mb values.
Firmware Upgrade
New product features are continuously
being added to Transition Networks's
products. These improvements are also
available for many products already
installed in the field. Management
modules and many media converters
can be updated remotely via firmware
upgrade. The remote upgrade feature
eliminates the need to ship the
products back to the manufacturer.
The firmware upgrades can be
performed by a user either locally via a
Console port or remotely via TFTP.
The upgrades do not require the
reconfiguration of the SNMP
management or converter feature
settings.
Table of Contents
Select Media Converter
Select Switch
Advanced Product Features
advanced
features
certification
Single
Fiber
Single fiber technology offers a 50% savings in fiber utilization. It is an attractive solution to maximize
the usage of a limited number of fiber runs.
In a traditional optical link, a fiber pair consists of two uni-directional strands. The single fiber
technology multiplexes two optical wavelengths of 1310nm and 1550nm into a single strand fiber. In
a single fiber media converter each wavelength is responsible for either the transmit or receive
function. Consequently, the bi-directional transmission is achieved by using a single strand. The
converters in a single fiber scenario "match" each other's wavelengths. Converter A transmits at the
wavelength of 1310nm and receives at 1550nm while the other converter transmits at 1550nm and
receives at 1310nm. Therefore, converters are usually used in pairs.
Single fiber technology is available on all Transition Networks Media Converters in maximum distance
ranges from 20 to 120km.
Source
Address Change
Select bridging media converters are
capable of detecting and reporting changes
in the MAC (Ethernet hardware) address
of the attached equipment. This feature
is very useful when administrators intend
that only a particular physical device be
attached to a particular port.
When the MAC address of a connected
device changes (new device is inserted)
the administrator receives the trap with the
notification of a change.
Last
Gasp
Select Transition Networks products are
equipped with Last Gasp. This feature
enables the device to store a small amount
of power to enable it to send out an SNMP
trap to alert the management console in
the event of a power failure.
Notification of an impending power
loss before it happens
Allows for quicker resolution of the
power loss
Remote
Fault Detect
Remote Fault Detect (RFD) is a trouble shooting feature found on Gigabit Ethernet copper-to- fiber
media converters. By enabling Remote Fault Detect on the remotely located media converter, the
status of the fiber link will be monitored and any link failures will be reported back to the local
converter. Should the remote converter lose its fiber RX signal, Remote Fault Detect will force the
converter to shut down its fiber TX port. If Link Pass Though is enabled on both ends, then the
copper ports will also be shut down to notify both end devices of the link failure.
Enable Remote Fault Detect on the remote device
Local end-device will be notified of remote fiber RX loss
Call us at 800-526-9267 or 952-941-7600
< 17 >
Table of Contents
Select Media Converter
Select Switch
Advanced Certification
Network
Equipment Building System (NEBS)
There are three levels of
NEBS approvals.
Transition Networks’s
Point System™ meets the
NEBS Level 3
requirements:
The Point System™ has been built to meet NEBS (Network Equipment Building System) requirements.
NEBS is a major test of quality that is extremely valuable for any organization supplying or purchasing
network equipment. A product that is NEBS certified has passed a suite of tests ensuring that the
product will:
Operate reliably and be serviceable
Not negatively affect other service providing equipment
Level 1:
Minimum environmental compatibility
Operate properly in adverse environmental conditions
Applications: Prototype equipment,
equipment used for non-vital services
Not cause harm to the environment or personnel
Ensure equipment compatibility with the telephone industry's electrical environment
Level 2:
Assures limited equipment operability in
controlled or normal environment
Simplify equipment planning and installation
Applications: equipment used in data
NEBS criteria are designed to accomplish the following:
Protect telecommunications equipment from service outages caused by incompatible equipment
Prevent interference to licensed radio transmitters and other close proximity telecommunications
equipment
centers or failure-tolerant services
Level 3:
Assures maximum equipment operability
Applications: critical network equipment
Minimize the risk of fires to telecommunications equipment
Ensure equipment operation under the range of temperature, humidity, vibration, and airborne
contamination present in telecommunications locations
(e.g. switches, transport products,
power systems)
Ensure equipment and service survivability in the event of earthquake
CISPR
Protect personnel from injury
ROHS
Compliance
All Transition Networks products are now available for shipment in compliance with the European Union
Commission Decision of August 18, 2005, Directive 2002/95/EC on the Reduction of Hazardous Substances
(RoHS), which takes effect on July 1, 2006.
The RoHS Directive prohibits the sale into the European Union of electronic equipment containing certain
amounts of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated
diphenylethers (PBDEs). Their maximum contents are defined at a maximum concentration value of less
than 0.1% by weight in homogenous material. An additional substance, cadmium, is restricted to 0.01% in
homogenous material.
The RoHS Directive allows a lead-in-solder exemption for telecommunication products and Transition
Networks will be taking this exemption. Our component vendors and sub-contract manufacturers are
continuing to remove lead from the entire process whereby this exemption will no longer be required.
There is no change in the model number or ordering procedure.
Waste
Electronic Equipment (WEEE)
CISPR
Stewardship
While the RoHS and WEEE directives are limited to the European Union other countries are considering
similar legislation. Transition Networks will continue to monitor the development of new legislation and
implement any new requirements. Transition Networks is currently ISO14001 compliant and will continue to
work to minimize our impact on the environment.
< 18 >
CISPR Class B is an international standard
that covers the amount of interference
from electromagnetic signals allowed from
electronics in homes and multi-tenant
dwellings. It is more stringent than the
Class A certifications required of most
electronics. Point System™ products have
been tested to meet all requirements of
Class A. Transition’s 18-slot Point
System™ chassis (CPSMC1800-200) is
also FCC Class B and CISPR Class B
compliant (residential).
In order to maintain Class B rating all
devices in the system must also be
Class B rated.
Transition Networks is also working to implement the WEEE recycling program with its partners in the EU.
The WEEE directive addresses the problem of product recycling products and requires product to be labeled
to identify participation in the program. The EU approved “double-crossed wheelie bin” symbol will affixed
to the product, and recycling instructions included in the user’s manual.
Environmental
Class B
CISPR is the acronym standing for the
Comité International Spécial des
Perturbations Radioélectriques
(International Special Committee on Radio
Interference) of IEC.
Visit our website at www.transition.com
Class A
FCC (Federal Communications
Commission) is the regulatory body that
establishes standards for interstate
telecommunication services in the United
States. Part of the FCC’s responsibilities is
to establish standards for radiated
emissions for a variety of operating
environments such as residential and
commercial structures. FCC Class A
describes requirements for radiated
emissions in commercial structures while
FCC Class B describes emissions
requirements for residential applications.
In addition to being FCC & CISPR Class A
compliant (commercial use) Transition’s
18-slot Point System™ chassis
(CPSMC1800-200) is also FCC Class B and
CISPR Class B compliant (residential).
Table of Contents
Select Media Converter
Select Switch
Products
The Point System™—Slide-In-Module Media Converters housed in a multi-slot chassis
SNMP Management; High-density applications; Redundant power
Pages 20 – 69
Stand-Alone Media Converters
Single point of conversion; Mid to low density applications; Rack or Wall Mountable
Pages 70 – 123
Corning Plug and Play™ Gigabit Ethernet Media Conversion Module
Integrate fiber optic cabling into your Data Center with the highest density, scalable
copper-to-fiber solution on the market today.
Page 108
Analog Video Media Conversion
Our Analog Only and Analog with Data video products give you the flexibility and
functionality you need to build or extend your video surveillance system.
Pages 68 – 69 & 122 – 123
Industrial Stand-Alone Media Converters, Switches & Device Servers
Hardened devices designed to reliably operate in harsh environments such as those
found on factory floors, outdoor enclosures or other hazardous environments.
Pages 124 – 131
PCI Media Converters
Installs directly into the PCI slot on a workstation or server; No additional power
required.
Page 133
GBICs and Small Form Factor Pluggables
Copper to Fiber connections via the GBIC or SFP port on switches and routers;
Economical; Hot-swappable
Pages 134 – 136
CWDM for Optical Networks
While utilizing existing infrastructure, CWDM products allow you to transmit multiple
protocols over an existing duplex fiber link.
Page 137
Network Interface Cards & PCMCIA Adapter Cards
Low-cost fiber connectivity; Redundant fiber connections available
Pages 138 – 142
Managed & Unmanaged Switches
Full selection of low port count to high port count Ethernet switching solutions
Pages 143 – 162
POE Switches, Converters and Accessories
Power & data over a single CAT-5: a new technology for wireless access points, VOIP
phones & network cameras
Pages 78, 86, 97, 98, 148 – 150 & 163
Fiber and Copper Patch Cords
Page 164 – 165
Call us at 800-526-9267 or 952-941-7600
< 19 >
Table of Contents
Select Media Converter
Select Switch
Point System Chassis Specifications
™
1-slot Point System™ Chassis
with external power
Ordering Info
1-slot Point System™ Chassis with
external power supply
CPSMC0100-210
1-slot Point System™ Chassis with
internal power supply
CPSMC0100-226
1-slot Point System™ Chassis with
two external power supplies
Note: The following slide-in-modules cannot be used with any of
the 1-slot Point System™ Chassis: C4TEF, CAPTF, CBFTF-120,
CBFTF-140, CEMTF, CGFEB or CMEFG.
1-slot Chassis Specifications
Dimensions
Power
Environment
-200 model:
Width: 3.85" [98 mm]
Depth: 5.67" [145 mm]
Height: 1.06" [27 mm]
-210 model:
Width: 6.1" [155 mm]
Depth: 5.88" [149 mm]
Height: 1.5" [38 mm]
-226 model:
Width: 4.4" [113 mm]
Depth: 5.67" [145 mm]
Height: 1.06" [27 mm]
-200 model: External AC/DC
included: wall mount 12V DC, 0.5A
unregulated
-210 model: Internal AC/DC
included: 12VDC, 1.25A,
unregulated
-226 model:
First External AC/DC included:
12VDC, 1.25A, 100 – 240VAC,
50/60Hz, Regulated, UL Listed
Second External AC/DC included:
12VDC, 2.5A, 100 – 240VAC,
50/60Hz, Regulated, UL Listed
0 – 50°C operating; 5% – 95%
humidity, non-condensing;
0 – 10,000 ft. altitude
Shipping Weight
2.0 lbs. [0.90 kg]
Compliance
-226 model: UL Listed
-200, -210 & -226 models:
EN55024; CISPR22/EN55022
Class A & B; FCC Class A & B;
[Class B-compliant only when using
Class B-compliant media
converters.] CE Mark
Warranty
8-slot Point System™ Chassis
with internal power
Ordering Info
CPSMC0100-200
2-slot Point System™ Chassis
Lifetime
Ordering Info
CPSMC0200-200
2-slot Point System™ Chassis
CPSMC0800-100
8-slot Point System™ Chassis
CPSMC0200-210
2-slot Point System™ Chassis with
Last Gasp option
CPSMC0810-100
8-slot Point System™ Chassis with
-48V power supply
CPSMC0200-221
2-slot Point System™ Chassis with
two external power supplies;
Includes Las Gasp option
8-slot Chassis Specifications
CPSMC0200-226
2-slot Point System™ Chassis with
two external power supplies
2-slot Chassis Specifications
Slots
(2) slots for slide-in-modules
Dimensions
Width: 5.5" [140 mm]
Depth: 5.7" [145 mm]
Height: 2.2" [56 mm]
Power
Environment
-200 & -210 models:
External AC/DC 12V DC 1.5 A
-221 & -226 models:
First External AC/DC included:
12VDC, 1.25A, 100 – 240VAC,
50/60Hz, Regulated, UL Listed
Second External AC/DC included:
12VDC, 2.5A, 100 – 240VAC,
50/60Hz, Regulated, UL Listed
0 – 50°C; 5% – 95% humidity, noncondensing; 0 – 10,000 ft. altitude
Slots
(8) slots in front for slide-inmodules
Unit LEDs
Power, Link, Receive, Transmit (with
use of optional LED module)
Dimensions
Width: 17.0” [430 mm]
Depth: 10.5” [267 mm]
Height: 1.75” [45 mm]
Power
Universal Input 100 – 240V,
50/60 Hz, 3.0 – 1.5 A
Environment
0 – 40°C; humidity: 5% – 95% noncondensing; 0 – 10,000 feet altitude
Shipping Weight
8.0 lbs. [3.6 kg]
Compliance
UL Listed; EN60950; FCC & CISPR
Class A; CE Mark
Warranty
Lifetime
Optional
Accessories
Description
CPSMM-120
Single Slot Master Management
Module (see page 24)
Shipping Weight
2.0 lbs. [0.90 kg]
Compliance
-221 & -226 models: UL Listed
-200, -210, -221 & -226 models:
EN55024; CISPR22/EN55022 Class
A&B; FCC & CISPR Class A&B
[Class B-compliant only when using
Class B-compliant media
converters.] CE Mark
CPSMM-200
Dual Slot Master Management
Module (see page 24)
CPSMM-210
Single Slot Expansion Management
Module (see page 24)
CPSMP-180
Redundant power supply 120/240
VAC
Lifetime
CPSMP-190
Redundant -48V power supply
CPSFP-200
Face Plate (required for all empty
slots) [5 included with chassis]
CPSLD-100
LED power status panel
CPSRE-238
23” Rack Mount Ears (1 set)
Warranty
Optional
Accessories
CPSMM-120
Description
Single Slot Master Management
Module (see page 24)
CPSMM-210
Single Slot Expansion Management
Module (see page 24)
SPS-1872-SA
18 – 60VDC; 17 – 30VMRS input;
external power supply; output
12.6VDC; 1.0A max. (see page 72)
CPSRE2-190
19" rack mount ears
Mounting Options (see page 70)
Optional Accessories
Description
SPS-1872-SA
18 – 60VDC; 17 – 30VMRS
input; external power supply;
output 12.6VDC; 1.0A max.
(see page 67)
CPSRE1-190
19" rack mount ears for
CPSMC0100-210
Mounting Options (see page 70)
WMBD
DIN Rail Mount Bracket
WMBP
Wall Mount Bracket
WMBV
Vertical Wall Mount Bracket
< 20 >
WMBD
DIN Rail Mount Bracket
WMBP
Wall Mount Bracket
WMBV
Vertical Wall Mount Bracket
Point System™ Chassis Options
Number of Ports
Class
Redundant Power Option
Rack Height
LEDs
19-slot
Class A
CPSMP-200 (AC)
CPSMP-210 (DC)
[rear loading]
2U
Optional LED Module: Power, Link, Receive, Transmit
18-slot
Class B*
CPSMP-200 (AC)
CPSMP-210 (DC)
[rear loading]
2U
Power, Link, Receive, Transmit
13-slot
Class A
CPSMP-120 (AC)
CPSMP-130 (DC)
CPSMP-140
[front loading]
2U
Power
8-slot
Class A
CPSMP-180 (AC)
CPSMP-190
[rear loading]
1U
Optional LED Module: Power, Link, Receive, Transmit
2-slot
Class B*
yes
2.2" [56 mm] First Power, Second Power
1-slot
Class B*
yes
1.0" [25 mm] First Power, Second Power
*when using Class B compliant Slide-In-Modules
Table of Contents
Select Media Converter
Select Switch
Point System Chassis Specifications
™
chassis specifications
features
snmp management
13-slot Point System™ Chassis
18-slot Point System™ Chassis
19-slot Point System™ Chassis
Ordering Information
Ordering Information
Ordering Information
CPSMC1300-100
13-slot Point System™ Chassis
CPSMC1800-200
18-slot Point System™ Chassis
CPSMC1900-100
19-slot Point System™ Chassis
CPSMC1310-100
13-slot Point System™ Chassis with
-48V power supply
CPSMC1810-200
18-slot Point System™ Chassis with
-48V power supply
CPSMC1910-100
19-slot Point System™ Chassis with
-48V power supply
CPSMC1320-100
13-slot Point System™ Chassis with
24V DC power supply
18-slot Chassis Specifications
19-slot Chassis Specifications
Slots
(18) slots in front for slide-inmodules;
(2) slots in back for power supply
modules
Slots
(19) slots in front for slide-inmodules
(2) slots in back for power supply
modules)
Unit LEDs
Power & In Use LEDs for each
installed power supply module
Unit LEDs
Power, Link, Receive, Transmit (with
use of optional LED module)
Dimensions
Width: 17.0” [430 mm]
Depth: 14.3” [363 mm]
Height: 3.5” [89 mm]
Dimensions
Width: 17.0” [430 mm]
Depth: 14.3” [363 mm]
Height: 3.5” [89 mm]
Power
Input Range: 85 – 265 VAC at
47 – 63 Hz.; Rated at 110 watts
max.
NOTE: Power supply modules
supply +12VDC at 9A maximum.
Only one power supply module
provides power to the chassis and
installed modules; the second power
supply is redundant in case the first
fails.
Power
Universal Input 100 – 240V; 50/60
Hz; 3.0 – 1.5 A
Environment
0 – 60°C*; humidity: 5% – 95%
non-condensing; 0 – 10,000 feet
altitude
(*0 – 60°C when redundant power
or fan module is used; 0 – 50°C if
single power supply is used.)
Shipping Weight
17.5 lbs. [7.9 kg]
0 – 60°C*; 5% – 95% humidity
non-condensing; 0 – 10,000 feet
altitude
(*0 – 60°C when redundant power
or fan module is used; 0 – 50°C if
single power supply is used.)
Compliance
UL Listed; EN60950; FCC & CISPR
Class A; CE Mark
Warranty
Lifetime
13-slot Chassis Specifications
Slots
(13) slots in front for slide-inmodules
(2) slots in front for power supplies
Unit LED
Power
Dimensions
Width: 17.0” [430 mm]
Depth: 12.0” [305 mm]
Height: 3.5” [89 mm]
Power
Universal Input 100 – 240V; 50/60
Hz; 3.0 – 1.5 A
Environment
0 – 50°C; humidity; 5% – 95% noncondensing; 0 – 10,000 feet altitude
Shipping Weight
15 lbs. [7.0 kg]
Compliance
UL Listed; EN55022 Class A;
EN55024; EN61000; CE Mark
Warranty
Lifetime
Environment
Optional
Accessories
Description
CPSMM-120
Single Slot Master Management
Module (see page 24)
CPSMM-200
Dual Slot Master Management
Module (see page 24)
CPSMM-210
Single Slot Expansion Management
Module (see page 24)
CPSMP-120
Redundant power supply 120/240
VAC
CPSMP-130
Redundant -48V power supply
CPSMP-140
CPSFP-200
CPSRE-230
Shipping Weight
17.5 lbs. [7.9 kg]
Compliance
CPSMC18x0-200: UL Listed, CE
Mark, EN55022, EN55024,
EN61000, FCC Class B, CISPR
Class B and NEBS
Warranty
Lifetime
Redundant 24V DC power supply
Optional
Accessories
Description
Face Plate (required for all empty
slots) [10 included with chassis]
CPSMM-120
23” Rack Mount Ears (1 set)
Single Slot Master Management
Module (see page 24)
Description
CPSMM-120
Single Slot Master Management
Module (see page 24)
CPSMM-200
Dual Slot Master Management
Module (see page 24)
CPSMM-210
Single Slot Expansion Management
Module (see page 24)
CPSMP-200
Redundant power supply 120/240
VAC
CPSMP-210
Redundant -48V power supply
CPSFM-200
Fan Module
CPSMM-200
Dual Slot Master Management
Module (see page 24)
CPSFP-200
Face Plate (required for all empty
slots) [15 included with chassis]
CPSMM-210
Single Slot Expansion Management
Module (see page 24)
CPSLD-100
LED power status panel
CPSRE-230
23” Rack Mount Ears (1 set)
Note: To maintain FCC Class B rating, CPSMM-200 should
be used.
Call us at 800-526-9267 or 952-941-7600
Optional
Accessories
CPSMP-200
Redundant power supply 120/240
VAC
CPSMP-210
Redundant -48V power supply
CPSFM-200
Fan Module
CPSFP-200
Face Plate (required for all empty
slots) [15 included with chassis]
CPSRE-230
23” Rack Mount Ears (1 set)
< 21 >
Table of Contents
Select Media Converter
Select Switch
Point System Chassis Features
™
Point
System™ Features
The Point System™ is a cost effective, fully configurable, managed modular media conversion platform, that
provides users with the flexibility to build their own custom media conversion system. The system includes
rack mountable chassis and modular, hot-swappable slide-in-cards. Each Point System™ Slide-In-Module
media converter, regardless of protocol, can be slid into the same chassis and provide managed media
conversion services to suit a custom network application.
The Point System™ modular media conversion system is a desired solution in enterprise and service
provider networks, because it offers:
Cost Savings
Is Point System™ What I Need?
I need one place to convert multiple links.
I need redundant power supplies.
Flexibility
I need SNMP managed media converters.
Maximum Control
I will be adding links in the future.
Reliability
I will be upgrading protocols in the future.
Potential for Future Growth
Cost Savings
Transition’s media converters allow users to only pay for fiber ports used when adding fiber to their
networks. Combining media conversion with copper-based equipment can save up to 45% in cost. The
Point System™'s modular design allows users to add converters as they need to add fiber to their network.
Therefore, users can utilize their existing copper-based equipment and not buy fixed multiport fiber devices.
If you answered YES to the majority of the
questions the Point System™ was designed
for you.
Flexibility
( I need one place to convert multiple links)
( I need one place to convert multiple protocols/speeds)
Because the cards are modular, users can add them gradually when fiber is added to the network and the
network grows. All card blades are hot-swappable and powered by chassis power supplies. The modularity
also means that the Point System™ supports a mix of various protocols in the chassis. For example, a 19slot chassis could be populated with 19 homogenous or unique converters (e.g. (Ethernet, T1/E1, ATM or
OC-12). Network designs differ widely, so Transition Networks has introduced a variety of chassis models
to address each specific need. The chassis cabinets are available in 19, 18, 13, 8, 2, or 1 slots.
Why Point System™?
Maximum Control
( I need SNMP managed media converters)
Administrators continuously monitor the network, allowing them to quickly respond to and troubleshoot
possible issues. Configuring the network is essential to the administrators as no one has a perfect network
that can run without any intervention. To improve the efficiency and save response time administrators turn
to SNMP management because it offers them considerable cost savings by eliminating the need to send a
technician to a remote location and by improving the accuracy of the configuration.
Power Surge Protection
The Point System™ offers a full control over the media conversion process. This full control translates into
three major aspects of network management. It offers:
A complete monitoring capability where cards can be monitored for power status, link status,
individual card settings and connection options. The chassis cabinet itself provides information
about internal temperature conditions, redundancy configuration of each power supply and
current power consumption by each power supply.
Active configuration of the media conversion platform (drive-by-wire). The users have the ability
to power on or off chassis card slots and reconfigure each power supply’s mode
(primary/secondary). Each media converter card provides a distinct set of user configurable
features such as Auto-negotiation Disable/Enable; Force 100Mbps/Full Duplex; Assign priority
level threshold (IEEE 802.1P); etc.
Alarm notification capability. Failure conditions and specific events discovered by Point
System™ are reported to multiple user-defined destinations in the form of an SNMP Trap.
This full control is protected by sophisticated SNMP Management Security Features (page 31) to ensure that
only authorized personnel can access the management.
< 22 >
Visit our website at www.transition.com
Complete Modularity
SNMP Management
Management Redundancy
Power Redundancy
Hot-swappable converters
Remote firmware upgrade
Scalability
Point System Chassis Features
™
Table of Contents
Select Media Converter
Select Switch
chassis specifications
features
Point
System™ Features
Reliability
( I need redundant power supplies or redundant management)
Network uptime is crucial and the Point System™ includes several features that will ensure your network
will stay up and running. The Point System™ chassis offers a redundant power option. Each chassis is
shipped with one power supply. The chassis can accommodate a second power supply. Power supplies are
available for AC or DC power. The power supplies are hot swappable so they can be replaced while the
chassis is running. The instant fail-over bus ensures that if one power supply fails, the second power supply
will keep the chassis up and running.
snmp management
Point System™ Product Family
Point System™ Chassis
Redundancy of SNMP management is also available by placing two primary management modules in a
chassis or a stack of chassis. The management modules negotiate primary and secondary responsibility to
manage the chassis or stack of units. In the event the primary management module fails the secondary unit
takes control.
Furthermore, each individual converter maintains its feature configuration within a microcontroller on the
converter card. If a management module fails the cards will stay up and running because the configuration
information is not lost with the loss of a management module. Each card and power supply has built in
surge protection to protect the unit from power surges. The power supplies are equipped with a standard 4amp fuse and can be repaired in the field.
Point System™ Slide-InModule Media Converters
When multiple chassis are connected to each other the SNMP management protection in case of failure
becomes critical. Healing Bus enables the users to maintain full control of the daisy chained chassis so that
the failure of any one module will not effect remaining modules in the stack.
Future Growth
( I will be adding links in the future)
Point System™ bridges the gap between continuous development of new networking technologies and the
long-term nature of an investment in networking gear. Transition Networks has implemented several
features that will allow you to keep your Point System™ Chassis current.
Each of the management modules can be updated via firmware upgrade. So, as network
technologies advance and new converters are introduced, the management module of today can
support the media converter of tomorrow.
Point System™
Management Modules
Similarly, our media converters can also be updated in the field. The firmware upgrade can be
performed either:
• locally via a Console port or
• remotely via TFTP.
Furthermore, a new converter addition does not require the reconfiguration of the SNMP
management settings.
Point System™ Components
The typical Point System™ will consist of four major components:
Chassis Cabinet (19, 18, 13, 8, 2, or 1 slots) (pages 20 – 21)
Management card for SNMP management (page 24)
Media Converter Slide-In-Modules (pages 32 – 65)
Focal Point™ 2.1
SNMP Management Platform
System Accessories (GUI, redundant power supplies, fans, rack
extensions, etc.)
Call us at 800-526-9267 or 952-941-7600
< 23 >
Table of Contents
Select Media Converter
Select Switch
Point System SNMP Management
™
Point
System™ SNMP Management
Point System™ Management Modules
CPSMM-120 - Single Slot Master Management Module
The most popular management card. This device occupies a single slot in the Point System™
chassis and it fully supports all management features. The CPSMM-120 has a DB-9 serial
interface for the CLI (command line interface) as well as a 10BASE-T RJ-45 interface for
network management. The CPSMM-120 should be used when the Point System™ chassis is
intended to be used as a single device (when the user does not intend to stack multiple Point
System™ Chassis together.)
CPSMM-200 - Dual Slot Master Management Module
The CPSMM-200 should be used when the user intends to manage multiple stacked chassis
(up to 8 chassis per stack) via a single IP or if the application requires an FCC/CISPR Class B
rating.
This device occupies two slots in a Point System™ chassis and will also fully support all
management features. The CPSMM-200 has a DB-9 serial interface as well as a 10BASE-T
interface similar to the CPSMM-120. However, it also includes two (2) additional RJ-45 ports
("in" and "out") to accommodate stacking of multiple Point System™ Chassis. The CPSMM200 also differs from the CPSMM-120 in that it is FCC/CISPR Class B rated (can be used in
residential applications.)
CPSMM-210 - Single Slot Expansion Management Module
This device, used in conjunction with the CPSMM-200 (or CPSMM-120 when inserted in the
same chassis) management module, allows the user to manage up to eight Point System™
chassis together in a "virtual cabinet". This brings the total number of media converters
managed by a single IP to 143. The CPSMM-210 has two RJ-45 ports ("in" and "out") used for
stacking multiple Point System™ chassis. The CPSMM-210 incorporates a self-healing bus so
that the failure of any one module will not effect remaining modules in the stack.
The CPSMM-210 should be used when the user has a requirement to stack multiple chassis.
The CPSMM-210 also has a FCC/CISPR Class B rating for deployment in residential
applications.
Specifications
Specifications
Product Number
CPSMM-120
Single Slot Master Management
Module
Protocol
IP, UDP, SNMP, TCP, TFP, ARP, ICMP,
TFTP, HTTP
Ports
DB-9 (x1), RJ-45 (x1)
LEDs
Power, Link, TX, RX
MIB Supported
MIB I , MIB II
Storage Temp
-40 – 80° C
Operating Temp
Altitude
Shipping Weight
Dimensions
0 – 50° C
0 – 10,000 ft.
1 lb. [0.45 kg]
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Compliance
FCC & CISPR Class A;
CE Mark
Warranty
Lifetime
< 24 >
Specifications
Product Number
CPSMM-200
Dual Slot Master Management Module
Protocol
IP, UDP, SNMP, TCP, TFP, ARP, ICMP,
TFTP, HTTP
Ports
DB-9 (x1), RJ-45 (x3)
LEDs
Power, Link, TX, RX
MIB Supported
MIB I , MIB II
Storage Temp
-40 – 80° C
Operating Temp
0 – 50° C
Altitude
0 – 10,000 ft.
Shipping Weight
2 lbs. [0.90 kg]
Dimensions
Width: 2.0" [51 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Compliance
FCC & CISPR Class B;
CE Mark
Warranty
Lifetime
Product Number
CPSMM-210
Single Slot Expansion Management
Module: Used in conjunction with
CPSMM-120 or CPSMM-200
Protocol
IP, UDP, SNMP, TCP, TFP, ARP, ICMP,
TFTP, HTTP
Ports
RJ-45 (x2)
LEDs
Power, Link
MIB Supported
MIB I , MIB II
Storage Temp
-40 – 80° C
Operating Temp
0 – 50° C
Altitude
0 – 10,000 ft.
Shipping Weight
1 lb. [0.45 kg]
Dimensions
Width: .086" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Compliance
FCC & CISPR Class B; CE Mark
Warranty
Lifetime
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
Point System SNMP Management
™
chassis specifications
features
Point
snmp management
System™ SNMP Management
All Point System™ Slide-in-Modules can be SNMP managed.
The card inside the chassis slot is connected to the backplane. Through the backplane the management card
communicates with each card in the chassis and sends requests for status and configuration. Each card has
a set of predefined features that are known to the management card so the user can receive current status
and can enable or disable all configurable features. The information about these manageable features are
included in the MIB document so the management application software can access this document and ask
for a particular feature to be changed accordingly. The user communicates with the management card over
the Ethernet cloud or directly through the serial port.
Remote Management
Select Transition converters can be remotely managed. This enables administrators to monitor & configure
remotely located stand-alone converters straight from the Network Management Station (NMS) without
leaving the office. IEEE802.3ah standard is implemented on remotely managed 10/100 and 10/100/1000
converters. These products also comply with MEF 9 and MEF 14 Carrier Ethernet technical specifications.
SNMP v.1, Telnet, HTTP, TFTP are the standard protocols used by The Point System™ SNMP Agent.
Chassis cabinets can be daisy chained (max 8 can be stacked) and managed via a single IP.
Group Control String
One of the most distinguished features of
the Point System™ management solution
is "Group Control String". This feature
allows users to put similar cards in
functional groups. If the user needs to
enable or disable a certain feature, it does
not have to be done on each card
individually. To save time changes can be
applied to these groups of cards at the
same time by a single click.
The following suite of features are currently available and manageable on Transition’s converters:
The following information is provided by
the management:
• Auto-Negotiation enabled/disabled
• Loopback copper enabled/disabled
• AutoCross enabled/disabled
• Loopback fiber enabled/disabled
Part Number
• Link Pass Through enabled/disabled
• Chassis reset
Serial Number
• Far End Fault enabled/disabled
• Module reset
Description
• Bandwidth Allocation
• Module - software mode/hardware mode
• Remote Loopback
• Power Supply - hardware mode/software mode
• Pause enabled/disabled
• Signal detect
• 802.1P enabled/disabled
• Line build out
• Port mirroring enabled/disabled
• Redundant management mode
(Primary/Secondary)
• Pause enabled/disabled
• Source Address Change
• Redundant Power Supply mode
(Primary/Secondary)
Firmware revision level
Software revision level
Power Status - Chassis
Power Status - Converter
Port Number
Port Type
• AIS fiber enabled/disable
Speed of operation
• AIS Copper enabled/disabled
Mode (Full/half duplex)
Alert Notification Features
The users can receive information about possible failures happening on the network. These notifications are
referred to as traps. The traps inform administrators either about the failure or when the failure was
removed and the network is back to its full operational capability. Several events are considered trappable;
which means when they happen a trap will be generated. The management module is capable of generating
the traps to up to four user specified IPs. The following traps are generated by Transition Networks
management agent:
Link up/down
Feature On/Off Status
Module - inserted/removed
Operating Temperature
Power Consumption
RMON Statistics
pSError(111) - A monitored MIB variable (e.g. Fiber
Link) has changed from its 'operational' state to its
'error' state.
pSErrorClear(112) - A monitored MIB variable has
changed from its 'error' state back to its
'operational' state.
pSDeviceInserted(113) - A new slide-in device was
detected on the bus.
pSDeviceRemoved(114) - A slide-in device that had
previously been detected on the bus has not been
recording its presence for a long time, and is
presumed to have been physically removed.
pSPowerLost(116) - The cabinet (e.g. chassis) into
which this management module is installed has lost
power and is running on capacitors. Both the
cabinet and the management module must support
the Last Gasp feature for this trap to be sent.
pSCabinetInserted(117) - A new cabinet was
detected.
Digital Monitoring of Optical Interfaces
(DMI)
VLAN Status and Settings
QOS Status and Settings
pSCabinetRemoved(118) - A cabinet that had
previously been detected has not been heard from
in a long time, and is presumed to have been
physically removed.
pSDeviceColdStart(115) - A slide-in device has
indicated that it has rebooted. This is most common
when the device is initially powered up, but in some
cases this trap indicates a warm start.
Call us at 800-526-9267 or 952-941-7600
< 25 >
Table of Contents
Select Media Converter
Select Switch
Point System SNMP Management
™
Point
System™ SNMP Management
SNMP Management Access Methods
There are several ways to access media conversion management and perform
maintenance or monitoring functions.
Focal Point™ 2.1 Features
It can be accessed via:
Transition's Focal Point™ 2.1 Graphical User Interface (GUI) Application
Web-Based application, standard web browser already installed on the
network (Internet Explorer, Netscape, Opera)
Command line interface via:
• Console Port
• Telnet
Graphical User Interface (GUI)
The management capabilities of Focal Point™ and Web Based are almost identical.
Users who already use other management platforms such as HPOV or Cisco Works
can also manage Transition Networks' converters with these applications. Focal Point™
2.1 is then used as Plug-in within HPOV or Cisco Works. Other NMS application can
also be used to Manage Transition's products provided the users imported the
Transition's MIB (available on-line) into these applications. This process is called
Compiling the MIBs.
Focal Point™ 2.1—(Free of Charge)
Transition Networks SNMP software management platform, Focal Point™ 2.1,
is free of charge and is available to users with any chassis or management
card purchase. Focal Point™ 2.1 is designed to offer full SNMP read/write management
capabilities via a user friendly graphical user interface (GUI).
Focal Point™ 2.1 software allows the user to enable and disable features incorporated
into each of the media converter modules. See page 24 for list of manageable
converter features.
Focal Point™ 2.1 has several new unique features to simplify network administration.
The new features include:
Universal Trap Viewer allows viewers to receive all traps, including traps
from third party devices, on the network
Service providers can utilize the RMON tools compatible with JDBC
database
One-click-telnet
Upgrade tool
Live-chat with Transition Networks Tech support personnel
Direct links to product literature such as datasheets, manuals and release
notes
Email notification and audible alarms
Focal Point™ 2.1's newly designed screens are very intuitive, and easy to navigate.
Customers can now navigate between multiple agents from within one screen and
switch between chassis cabinets through the drop down menu. The Focal Point™ 2.1
has two types of views: a summary screen, that reports the converter's link status and
its critical features, and a detailed screen that brings up everything about the particular
device. These views provide quick access to network management.
One of the most important features of this package is an integrated Trap Viewer
application.
It allows users to see and log received traps from IP based network equipment
(including third party devices). Traps are displayed in a user friendly, readable format.
Users can filter traps to read desired messages only.
Product Configuration
Transition's Focal Point™ 2.1 supports the following software platforms:
MS Windows® 95/98/Me
MS Windows® NT 4.0 (x86), 2000, XP
HP OpenView NNM 5.0 or Higher
Sun Solaris 2.5 or higher, HP OpenView NNM 4.11 or higher
HP-UX 10.20 or higher, HP OpenView NNM 4.11 or higher
Java™ Runtime Engine (JRE™) 2 version 1.4.0 or higher required;
(included in installation CD)
< 26 >
Visit our website at www.transition.com
Status monitoring
Enables/disables converter features
Universal Trap Viewer Allows viewers to
receive all traps, including traps from third
party devices, on the network.
One-click-telnet
Upgrade tool
Live-chat with Transition Networks Tech
Support personnel
Direct links to product literature
Table of Contents
Select Media Converter
Select Switch
Point System SNMP Management
™
chassis specifications
features
Main
snmp management
Screen
The main screen allows users to enter new or select existing IPs of all agents (management cards).
When the IP is entered/selected the list of available chassis is displayed.
List of previously accessed IPs are
stored in the program. No need to
retype the IP once entered.
Cabinet
View Screen
Displays the selected chassis information. Each converter is displayed with
connectors, LEDs, and status (e.g. ALERT).
An Alert is displayed if a link is
lost or if there is another problem
LEDs display actual status
Specific cards with connectors are displayed
Group Control String for ease of simultaneous
feature changes on multiple cards
View other chassis managed by the same agent
Ability to switch agents (management
cards) and view them from the same
window
Immediate access to trap server/viewer; telnet,
technical support & upgrade agent.
Call us at 800-526-9267 or 952-941-7600
Agent & card summaries for ease
of monitoring
< 27 >
Point System SNMP Management
™
Converter
Table of Contents
Select Media Converter
Select Switch
Card Screen
An individual card can be highlighted by clicking on the converter in the Chassis
Screen. A screen is displayed that allows the network administrator to edit the
converter’s configuration.
Links to product literature
Enable & disable various features such
as Bandwidth Allocation; Loopback or
Auto-Negotiation
Specific Group Control String can be
assigned to the cards
Management
Module Screen
Displays the interface for the primary management card.
Shows revision level of software &
firmware
Management Module specific
system contact, name, and
location
Provides uptime for each Management
Module
Administrator specified IP addresses to
receive TN traps
< 28 >
Visit our website at www.transition.com
Point System SNMP Management
™
Table of Contents
Select Media Converter
Select Switch
chassis specifications
features
TrapViewer
snmp management
Screen
Displays traps received from Transition’s as well as third party devices.
Traps Filters enable users to view only desired trap types (e.g. Link Down)
RMON statistics represented in graphical format and the database file.
Alerts
Filter Traps
Call us at 800-526-9267 or 952-941-7600
< 29 >
Point System SNMP Management
™
Agent
Table of Contents
Select Media Converter
Select Switch
Summary (Web-based) Screen
Transition Networks’s Point System™ products can be managed via the Internet.
Web Based Management offers all of the same read/write functionality of Focal
Point™, but allows the network manager to access their converters with any
browser software.
Click to view Cabinet Summary
User defined description
Search via user defined groups
Cabinet
View (Web-based) Screen
Displays all of the cards in the selected chassis.
Click to view card
Summary of converter’s critical info
Card
View (Web-based) Screen
Allows user to view and change settings.
Assign to user defined group
(Group Control String; see page 25)
< 30 >
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
Point System SNMP Management
™
chassis specifications
features
Command
Line Interface management (CLI)
snmp management
CLI offers the most comprehensive set of management features. CLI is used during the initial setup (set IPs
etc.) and trouble shooting, but can also be used in day-to-day Point System™ management (converter
management, firmware upgrades, management security features, etc.)
Advanced
Management Security
Point System™ offers a comprehensive approach to
SNMP management security. It was designed with
several levels of access protection to ensure that
network management is accessible only to those
who are authorized.
Password (a.k.a. Community names)
Two levels of access privileges are password
protected.
Read access (monitor ONLY) - a Community
Name with a particular set of privileges to
monitor the network without the right to change
any of its configuration
Read/Write (View & make changes) - a
Community Name with an extended set of
privileges to monitor the network as well as
actively change any of its configuration
Firewall
Transition Networks management agent contains an
internal IP firewall. This built-in filter examines each
incoming packet to determine whether to forward it
to the management or to discard it. The decision is
based on user-defined rules. These rules are
entered in the Command Line Interface. Once the
rule is entered the firewall matches packets based
on source IP address, destination protocol,
destination port, or some combination of the three.
Each rule also contains a "drop" or "pass" action,
making it possible to configure the filter with either
a "default accept" or a "default deny" philosophy.
FILTERMAC
Filtermac can be used in conjunction with its
firewall feature. The FILTERMAC allows the user to
specify up to four trusted Ethernet Hardware
addresses (i.e. MAC addresses) that are permitted
to send IP packets to the Agent. Once this feature is
used no other MAC addresses are permitted access
to the management information.
SNMP Lock
SNMP messages originating from outside of the
local subnet are ignored unless the Management
Module has a Telnet session connected to the same
IP address. This feature is designed to make it
much more difficult for outside intruders to make
changes to management settings via a method
known as "IP Spoofing." In an IP Spoofing attack,
the intruder configures an attacking computer to
assume the identity of a trusted computer (NMS) in
order to bypass firewall security measures. This
deters intrusions by making the IP spoofing of
SNMP datagrams much more difficult.
Security Update
RIDS
Reactive Intrusion Detection System
automatically bans any IP station sending
questionable traffic that causes HTTP errors.
This command can be combined with the
FireWall (FWALL) for advanced security such
as to protect an authorized station from ever
being banned.
HTTP Port
This command allows the user to change the
TCP port for the web server operation.
Typically Port 80 is used for World Wide
Web HTTP traffic, but this can be changed to
provide protection from hackers probing the
internet for vulnerable ports.
Lock/Unlock CLI
LOCK / UNLOCK - The LOCK command allows the
CLI to be locked so that no commands can be
entered.
(Unsolicited log messages are still displayed, and
SNMPLOCK functionality is still active when the
console is locked.) Once the console is locked, it
remains locked to all users regardless of the access
method until UNLOCK command is used.
Traps
The Agent sends Coldstart traps when it is rebooted
and enterprise specific Error/Error Clear traps when
Ethernet link goes down or up. Unexpected receipt
of these traps could indicate that an attack is in
progress.
Call us at 800-526-9267 or 952-941-7600
< 31 >
Table of Contents
Select Media Converter
Select Switch
Point System Part Number Key
™
_ _ _ _ _ _ _ _ _ - _ _ _
C
S
< 32 >
Chassis card
2xx
1xx
x1x, x2x
xx1
Stand-Alone converter
4TEF
Remotely Managed 4x T1, Ethernet &
RS232 Mux
APTF
POTS 2-wire
BFTF
10/100 Bridging
BFFG
CSCF
OAM/IP-Based Remotely Managed
Bridging Media Converter
DS3
DSFE
Fast Ethernet Device Server
FEPE
Power Over Fast Ethernet
EMTF
2/4-wire, Leased Line, E&M
EPOE
Power Over Ethernet
ETTF
10BASE-T to 10BASE-FL
FBRM
10/100BASE-TX to 100BASE-FX
OAM/IP Based Remotely Managed
FEPE
Power Over Fast Ethernet
FETF
100BASE-TX to 100BASE-FX
FMFF
Single Mode to Multimode Fiber or
Optical Line Converter
GETF
1000BASE-T to 1000BASE-SX/LX
GFEB
10/100/1000BASE-T to 1000BASE-SX/LX
ISTF
Industrial Stand-Alone Converter
(10/100BASE-TX to 100BASE-FX)
ISTM
Industrial Stand-Alone Managed
(10/100BASE-TX to 100BASE-FX)
MEFG
Remotely Managed IEEE 802.3ah
10/100/1000BASE-TX to
1000BASE-BX/SX/LX
POEB
Power Over Ethernet
10/100BASE-TX to 100BASE-FX
PSVT
High Speed Serial to Fiber
RMFE
Remotely Managed Fast Ethernet
RS2F
RS232 to Fiber
RS4F
RS422/485 to Fiber
SDTF
T1/E1
SEFE
10BASE-T to 10BASE-FL or 100BASE-TX
to 100BASE-FX speed selectable
SETF
10/100BASE-TX to 10/100BASE-SX
VIDF
Analog CCTV Video: NTSC, PAL, SECAM
10
11
12
13
14
15
16
17
RJ-45
18
19
Multimode (MT-RJ)
20
22
24
26
27
29
30
31
32
33
35
Single BNC
39
40
41
Multimode (LC)
FCC Class B (residential)
FCC Class A (commercial)
Product Configurations
Revision Level
Multimode (ST)
Single Mode (ST)
Multimode (SC)
Single Mode (SC)
Single Mode (SC) Long Haul
Single Mode (SC) Xtra Long Haul
Single Mode (SC) Long Wave 1550
Single Mode (LC)
Single Mode (ST) Long Haul
Extended Multimode (SC)
26-pin connector
Multimode (ST) Long Haul
Single Fiber (SC)
Dual BNC
DB-9 connector
Terminal Block connector
RJ-11
Single Mode (SC) Long Wave 1550
Extended
SFP slot
5-position Terminal Block
Visit our website at www.transition.com
point system™
slide-in-module
media converter
Table of Contents
Select Media Converter
Select Switch
Ethernet 10BASE-T to 10BASE-FL
Ethernet Copper to Fiber Media Converter
ethernet
CETTF10xx-x0x
fast ethernet
10/100 bridging
100/1000 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
e&m, 2/4-wire
pots 2-wire
video
Integrate mixed cabling environments in either switched or shared
Ethernet networks.
Connect legacy 10BASE-T devices to a fiber based cabling
infrastructure.
Extend Network Distance & Connect Unlike Devices
Extend Network Distance
Two 10BASE-T to 10BASE-FL
Media Converters used backto-back extend the distance
between two 10BASE-T
devices up to 5 km (3.1 mi.)
using multimode fiber or up to
40 km (24.9 mi.) using single
mode fiber without a repeater.
Connect Unlike Devices
Connect your workgroup to a
distant server or a central
switch; or extend distances
between like and unlike devices
in either full or half-duplex
modes.
Specifications
See pages 171 – 181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™ 10BASE-T; 10BASE-FL
4-position Switch
Fiber Port: Enables / disables network traffic on the fiber
port; (Up = enabled)
Copper Port: Enables / disables network traffic on the copper
port; (Up = enabled)
AutoCross™: Enables / disables AutoCross™ function;
(Up = enabled)
Link Pass Through: Enables / disables Link Pass Through
function; (Up = enabled)
3-position Jumper
Status LEDs
Dimensions
Hardware: Converter mode is determined by 4-position
switch settings
Software: Converter mode is determined by most recently
saved on-board microprocessor settings.
PWR (Power): On for normal operation;
LKF (Link Fiber): Steady LED indicates good fiber link and
normal operation;
RXF (Receive Fiber): Flashing LED indicates data reception
on fiber link;
LKC (Link Copper): Steady LED indicates good copper link
and normal operation;
RXC (Receive Copper): Flashing LED indicates data
reception on copper link
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
2.3 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
EN55022; EN55024; EN61000; CE Mark
Warranty
Lifetime
See Also:
Ethernet Stand-Alone Media Converters
pages 74 – 75
Call us at 800-526-9267 or 952-941-7600
Features (both Class A & B)
Can be used with any Point System™ Chassis
(see pages 20 & 21)
AutoCross™ (see page 14)
Link Pass Through (see page 15)
Automatic Link Restoration (see page 16)
Remote Firmware Upgrade
(see page 16)
See pages 171–181 for complete fiber optic connector specs.
Ordering Info: Class A
Ordering Info: Class B
CETTF1011-105
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 850nm MM (ST)
[2 km/1.2 mi.] Link Budget: 13.5 dB
CETTF1011-200
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 850nm mm (ST)
[2 km/1.2 mi.] Link Budget: 13.5 dB
CETTF1013-105
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 850nm MM (SC)
[2 km/1.2 mi.] Link Budget: 13.5 dB
CETTF1013-200
10BASE-T (RJ-45)[100 m/328 ft.]
to 10BASE-FL 850nm MM (SC)
[2 km/1.2 mi.] Link Budget: 13.5 dB
CETTF1018-105
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 850nm MM (MT-RJ)
[2 km/1.2 mi.] Link Budget: 13.5 dB
CETTF1027-200
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 1300nm MM (ST)
[5 km/3.1 mi.] Link Budget: 13.5 dB
CETTF1027-105
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 1300nm MM (ST)
[5 km/3.1 mi.] Link Budget: 13.5 dB
CETTF1012-200
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 1310nm SM (ST)
[20 km/12.4 mi.] Link Budget: 7.0 dB
CETTF1012-105
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 1310nm SM (ST)
[20 km/12.4 mi.] Link Budget: 7.0 dB
CETTF1014-200
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 7.0 dB
CETTF1014-105
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 15.0 dB
CETTF1022-200
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 1310nm SM (ST)
[40 km/24.9 mi.] Link Budget: 19.0 dB
CETTF1022-105
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 1310nm SM (ST)
[40 km/24.9 mi.] Link Budget: 19.0 dB
CETTF1015-105
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 14.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
CETTF1029-105
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 1310nm TX / 1550nm RX
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
FCC & CISPR Class A devices
comply with radiated emissions
standards for commercial
applications in the United States
(FCC Class A) and Europe (CISPR
Class A).
FCC & CISPR Class B devices
comply with radiated emissions
standards for residential applications
in the United States (FCC Class B)
and Europe (CISPR Class B).
CETTF1029-106
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 1550nm TX / 1310nm RX
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
< 33 >
point system™
slide-in-module
media converter
Ethernet or Fast Ethernet 10BASE-T to 10BASE-FL or 100BASE-TX to 100BASE-FX
CSEFE10xx-10x
Speed Selectable Media Converter
Selectable speed setting:
The converter can be set to 10Mbps
or 100Mbps. Both copper and fiber
ports are automatically set to the
same speed.
Provides easy migration path from
10Mbps to 100Mbps networks
Converts copper to fiber to assist
with fiber integration into your copper
network
Extend Network Distance
Transition Networks's speed
selectable copper to fiber Media
Converter allows you to extend
the distance between copper
based connections with the use of
fiber optic cable. The ability to
select the speed of converter
allows for easy migration from a
10Mbps network today to a
100Mbps network in the future.
This converter is a true layer 1
device as both the copper and
fiber ports operate at the same
speed setting (i.e. 100BASE-TX to
100BASE-FX). For 10Mbps
applications, these devices must
be used in pairs.
Ethernet
Use the 10BASE-T to 10BASE-FL
speed setting (back-to-back) to extend
the distance between two 10BASE-T
devices up to 40 km (24.9 mi.) using
single mode fiber without a repeater.
Specifications
See pages 171–181 for complete fiber optic connector specs.
Automatic Link Restoration (see page 16)
Standards
IEEE Std. 802.3™
Remote Firmware Upgrade (see page 16)
Switches
Switch 1: Link Pass Through on/off
Switch 2: 10Mb or 100Mb operation
Supports single mode fiber
3-position Jumper
Hardware: Converter mode is
determined by DIP switch settings
Software: Converter mode is
determined by most recently saved
on-board microprocessor settings
Status LEDs
PWR (Power): Lit for normal
operation
F-ACT (Fiber Activity): Blinking = data
reception on the fiber link
F-100 (Fiber Speed):
ON = link at 100Mb
F-10 (Fiber Speed):
ON = link at 10Mb
C-ACT (Copper Activity): Blinking =
data reception on the copper link
C-100 (Copper Speed):
ON = link at 100Mb
C-10 (Copper Speed):
ON = link at 10Mb
Management Features
Report local converter status to chassis:
• Copper/fiber link status
• Hardware/Software mode
• 10Mb or 100Mb speed setting
• Link Pass Through on/off setting
Write operation includes:
• Enable/disable Link Pass Through
• Set speed to 10Mb or 100Mb
Can be used with any Point System™ Chassis
(see pages 20 & 21)
See Also:
Ethernet or Fast Ethernet Speed Selectable
Stand-Alone Media Converters
page 80
Visit our website at www.transition.com
See pages 171–181 for complete fiber
optic connector specs.
CSEFE1012-100
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE-FL or 100BASE-FX 1310nm
SM (ST)
[20 km/12.4 mi.] Link Budget: 17.0 dB
CSEFE1022-100
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE-FL or 100BASE-FX 1310nm
SM (ST)
[40 km/24.9 mi.] Link Budget: 26.0 dB
Features
Link Pass Through (see page 15)
Ordering Info
CSEFE1014-100
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE-FL or 100BASE-FX 1310nm
SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
Fast Ethernet
Use the 100BASE-TX to 100BASE-FX
setting to extend the distance between
any two 100BASE-TX devices up to 40
km (24.9 mi.) using single mode fiber.
Or interface directly with a 100BASEFX compliant port on any device to
provide a 100BASE-TX port interface.
AutoCross™ (see page 14)
< 34 >
Table of Contents
Select Media Converter
Select Switch
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
3.6 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A; EN55024;
EN60950 Class A; FCC Class A;
CE Mark
Warranty
Lifetime
CSEFE1015-100
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE-FL or 100BASE-FX 1310nm
SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
CSEFE1029-100
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE-FL or 100BASE-FX 1310nm
TX / 1550nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CSEFE1029-101
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE-FL or 100BASE-FX 1550nm
TX / 1310nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
point system™
slide-in-module
media converter
Table of Contents
Select Media Converter
Select Switch
Fast Ethernet 100BASE-TX to 100BASE-FX [Class A]
CFETF10xx-105
Fast Ethernet Class A Media Converter
ethernet
fast ethernet
10/100 bridging
100/1000 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
e&m, 2/4-wire
pots 2-wire
video
Integrate fiber into a copper environment
Provides a fiber interface when connected to devices with
RJ-45 ports.
Extend Network Distance:
Extend Network Distance
Deploy fiber in a strategic and
economical manner by using Fast
Ethernet converters. Fast Ethernet
converters can extend distances that
copper cannot reach.
Ordering Info [Class A]
See pages 171–181 for complete fiber
optic connector specs.
CFETF1011-105
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Features
CFETF1013-105
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Round trip delay of only 40 bit
times —far below the Class II
rating of 92 bit times.
CFETF1018-105
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm MM (MT-RJ)
[2 km/1.2 mi.] Link Budget: 14.5 dB
Auto-Negotiation (see page 14)
AutoCross™ (see page 14)
Link Pass Through (see page 15)
Automatic Link Restoration
(see page 16)
Remote Firmware Upgrade
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™
3-position Jumper
Hardware: Converter mode is determined by 4-position switch
settings.
Software: Converter mode is determined by most recently
saved on-board microprocessor settings.
(see page 16)
Can be used with any Point
System™ Chassis
(see pages 20 & 21)
CFETF1014-105
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
4-position Switch
Auto-Negotiation (UP = enabled): Allows detection of, and
adaptation to, full-duplex or half-duplex mode in device
attached to copper link.
Link Pass Through (UP = enabled): Allows a fault EITHER on
the copper OR on the fiber side of the media converter to stop
signal and data transmission on the other side.
AutoCross™ (UP = enabled): Allows straight-through twisted
pair cable to be used for crossover connections.
Status LEDs
Power: Indicates that DC power is connected
TX (Link Copper): ON indicates TP link; Blinking indicates TP
receive;
FX (Link Fiber): ON indicates fiber link; Blinking indicates
Fiber receive
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
CFETF1015-105
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
CFETF1016-105
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
CFETF1017-105
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
FCC & CISPR Class A devices comply
with radiated emissions standards for
commercial applications in the United
States (FCC Class A) and Europe
(CISPR Class A).
3.4 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CE Mark, FCC Class A; CISPR Class A; VCCI Class 1
Warranty
Lifetime
FCC & CISPR Class B devices comply
with radiated emissions standards for
residential applications in the United
States (FCC Class B) and Europe
(CISPR Class B).
[See CFETF10xx-205 for Class B
product.]
See Also:
Fast Ethernet Stand-Alone Media
Converters
pages 81 –82
Call us at 800-526-9267 or 952-941-7600
< 35 >
point system™
slide-in-module
media converter
Table of Contents
Select Media Converter
Select Switch
Fast Ethernet 100BASE-TX to 100BASE-FX [Class B]
CFETF10xx-2xx
Fast Ethernet Class B Media Converter
Integrate fiber into copper
based environments that require
Class B rated products.
Can be used with any Point
System™ Chassis (see pages. 20 &
21)
Should be used in the 18-slot Class
B Point System™ Chassis if Class B
ratings are required.
Features
Round trip delay of only 40 bit times
—far below the Class II rating of 92 bit times.
Auto-Negotiation (see page 14)
AutoCross™ (see page 14)
Link Pass Through (see page 15)
Far End Fault (FEF) Detection (see page 14)
Automatic Link Restoration (see page 16)
Pause (see page 15)
Remote Firmware Upgrade (see page 16)
The following converter management features are available
in conjunction with the Point System™:
Reporting Features
Report converter status to management software:
• TP & Fiber Link status
• Hardware switch settings
• Fault
• TP cable length
Write operation includes:
• Power on/off device
• Full or half-duplex
• Pause enable/disable
• LPT enable/disable
• FEF enable/disable
• AutoCross™ enable/disable
Ordering Info [Class B]
See pages 171–181 for complete fiber optic connector specs.
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™
Switches
SW1: Auto-Negotiation (UP = ON)
SW2: Pause (UP = ON)
SW3: Link Pass Through (UP = ON)
SW4: Far End Fault (UP = ON)
Internal Jumpers
AutoCross™ Jumper: Enable/disable AutoCross™
Hardware/Software Jumper: Hardware: Converter mode is determined by 4-position
switch settings
Software: Converter mode is determined by most recently
saved on-board microprocessor settings.
Status LEDs
PWR (Power): On = connection to external power
LKF (Fiber Link): On = Fiber Link
RXF (Fiber Receive): Blinking = data reception on
fiber link
RXC (Copper Receive): Blinking = data reception on
copper link
LKC (Copper Link): On = Copper Link
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
3.4 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A & B; FCC Class A & B; CE Mark
Warranty
Lifetime
See Also:
Fast Ethernet Stand-Alone Media
Converters
pages 81 –82
< 36 >
Visit our website at www.transition.com
CFETF1011-205
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
CFETF1013-205
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
CFETF1039-205
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (LC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
CFETF1018-205
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm MM (MT-RJ)
[2 km/1.2 mi.] Link Budget: 14.5 dB
CFETF1014-205
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
CFETF1019-205
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (LC)
[20 km/12.4 mi.] Link Budget: 17.3 dB
CFETF1015-205
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
CFETF1016-205
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
CFETF1017-205
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
CFETF1029-205
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CFETF1029-206
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CFETF1029-207
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CFETF1029-208
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CFETF1029-209
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
CFETF1029-210
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[60 km/37.3 mi.] Link Budget: 28.0 dB
CFETF1029-211
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[80 km/49.7 mi.] Link Budget: 33.0 dB
CFETF1029-212
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[80 km/49.7 mi.] Link Budget: 32.0 dB
point system™
slide-in-module
media converter
Fast Ethernet 100BASE-TX to 100BASE-FX
Remotely Managed Fast Ethernet Media Converter
In-band management of stand
alone Fast Ethernet media
converters
Remote Loopback assists in
diagnosing network problems
Upstream and downstream
bandwidth control allows
service providers to offer an
array of services
With the Remotely Managed Fast
Ethernet Media Converter, service
providers can now monitor and
manage the entire optical link from
the Central Office (CO) to the
Customer Premise Equipment (CPE).
They also have the ability to remotely
change the bandwidth offered to the
customer in increments of 64KBps and
choose the appropriate mode of
connection straight from their Network
Management Centers.
Remotely Managed Fast Ethernet
Converters should be used in pairs.
Typical installation will include a
chassis card installed in the Point
System™ locally and a stand-alone converter (SRMFE)
installed at the remote location.
Auto-Negotiation (see page 14)
Table of Contents
Select Media Converter
Select Switch
CRMFE1011-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
CRMFE1013-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
CRMFE1018-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm MM (MT-RJ)
[2 km/1.2 mi.] Link Budget: 14.5 dB
Specifications
Standards
IEEE Std. 802.3™
3-position Jumpers
Jumper (J2): Enable/Disable
AutoCross™
Jumper (J6):
Hardware: Converter mode is
determined by 4-position switch
settings
Software: Converter mode is
determined by most recently saved
on-board microprocessor settings.
Far End Fault (FEF) (see page 14)
Automatic Link Restoration (see page 16)
4 position Switch
Remote Management (see page 15)
Loopback (see page 16)
Bandwidth Allocation (see page 16)
Remote Firmware Upgrade (see page 16)
Can be used with any Point System™ Chassis
(see pages 20 & 21)
Status LEDs
Remotely Managed Fast Ethernet
Stand-Alone Media Converters
Pos 1: Auto-Neg: (ON) Advertises
100Mb/s full/half-duplex during autonegotiation; (OFF) (Used primarily
when connecting to hub) Operates at
100Mb/s in duplex mode of attached
device.
Pos 2: PAUSE: Applies only if Switch
1 is UP AND media converter is
connected to Auto-Negotiating
device(s) capable of Pause Control
Frame propagation. (UP) ALLOWS
negotiation of Pause Control Frame.
(DOWN) Does NOT allow negotiation
of Pause Control Frame.
Pos 3: Link Pass Through: (UP)
enabled; (DOWN) disabled
Pos 4: Far End Fault: (UP) enabled;
(DOWN) disabled
Power
LKF (Fiber Link)\
RXF (Fiber Receive)
RXC (Copper Receive)
LKC (Copper Link)
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
3.4 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A & B +
EN55024; FCC Class A & B; CE Mark
Warranty
Lifetime
page 84
Call us at 800-526-9267 or 952-941-7600
10/100 bridging
100/1000 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
e&m, 2/4-wire
pots 2-wire
video
See pages 171 – 181 for complete fiber
optic connector specs.
Link Pass Through (see page 15)
See Also:
fast ethernet
Ordering Info
AutoCross™ (see page 14)
Pause (see page 15)
ethernet
CRMFE10xx-20x
See pages 171–181 for complete fiber optic connector specs.
Features
with remote management &
bandwidth allocation
CRMFE1014-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
CRMFE1015-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
CRMFE1016-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
CRMFE1017-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
CRMFE1035-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm SM (SC)
[120 km/74.6 mi.] Link Budget: 36.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
CRMFE1029-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CRMFE1029-201
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CRMFE1029-202
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CRMFE1029-203
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
< 37 >
point system™
slide-in-module
media converter
Fast Ethernet or ATM/OC-3/SDH/SONET
Single Mode to Multimode Media Converter
Connect single mode fiber
cable to devices with multimode
ports.
single mode to
multimode fiber
CFMFF1xxx-20x
Table of Contents
Select Media Converter
Select Switch
Can be used with any Point
System™ Chassis
(see pages 20 & 21)
Protocol Transparency
Extend Network Distance
Convert multimode
100 – 155Mbps interfaces to
single mode fiber on a port-byport basis and extend ATM or
Fast Ethernet over single mode
fiber up to 80 km.
Features
Link Pass Through (see page 15)
Card Manageability:
Automatic Link Restoration
• MM/SM signal detect
(see page 16)
• Hardware/software mode
Remote Firmware Upgrade
• Fiber port enable/disable
multimode or single mode
(see page 16)
Ordering Info [Class B]
See pages 171–181 for complete fiber optic connector specs.
CFMFF1313-200
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™
3-position Jumper
Hardware: Software mode is disabled.
Software: Converter mode is determined by most recently
saved on-board microprocessor settings.
Status LEDs
Dimensions
Power Consumption
Power: Steady green LED indicates connection to external
AC power
LKS (Single mode Fiber Link): Steady LED indicates single
mode fiber link
LKM (Multimode Fiber Link): Steady LED indicates
multimode fiber link
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
3.5 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
UL Listed; C-UL Listed (Canada); CISPR/EN55022 Class A;
EN55024; EN61000; FCC Class A; CE Mark
Warranty
Lifetime
See Also:
Fast Ethernet or ATM/OC-3/SDH/SONET StandAlone Media Converters
page 85
< 38 >
Visit our website at www.transition.com
CFMFF1314-200
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
CFMFF1315-200
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
CFMFF1316-200
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to 1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
CFMFF1317-200
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
CFMFF1329-200
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to 1310nm TX/1550nm RX single fiber
SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CFMFF1329-201
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CFMFF1329-202
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to 1310nm TX/1550nm RX single fiber
SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CFMFF1329-203
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to 1550nm TX/1310nm RX single fiber
SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CFMFF1414-200
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
CFMFF1429-200
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to 1310nm TX/1550nm RX single fiber
SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CFMFF1415-200
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
CFMFF1429-201
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to 1550nm TX/1310nm RX single fiber
SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CFMFF1429-202
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to 1310nm TX/1550nm RX single fiber
SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CFMFF1429-203
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to 1550nm TX/1310nm RX single fiber
SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
point system™
slide-in-module
media converter
10/100 10/100BASE-TX to 10/100BASE-SX
CSETF101x-205
10/100BASE-SX Media Converter
Lowest possible cost solution
Ideal for building backbone and
for fiber installation up to 60
meters (100BASE-SX).
horizontal cabling applications
where cost and 10/100 autonegotiation are critical.
10/100 on fiber is possible with
10/100BASE-SX.
ethernet
fast ethernet
10/100 bridging
100/1000 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
e&m, 2/4-wire
pots 2-wire
video
Extend Network Distance
Extend Network Distance
Used in pairs, this media
converter can extend distances
between two twisted pair
switches or a switch and a server
up to 60 meters over multimode
fiber (100BASE-SX).
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
CSETF1011-205
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10/100BASE-SX 850nm multimode
(ST) [60 m/ 197 ft.]
Connect Remote Devices
Using a single 10/100BASE-SX
media converter, a switch with a
copper port can be connected to
a switch or any other
10/100BASE-SX compliant device
with an existing fiber interface.
CSETF1013-205
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10/100BASE-SX 850nm multimode
(SC) [60 m/ 197 ft.]
Features
Auto-Negotiation
Table of Contents
Select Media Converter
Select Switch
Specifications
(see page 14)
See pages 171–181 for complete fiber optic connector specs.
AutoCross™ (see page 14)
Standards
IEEE Std. 802.3™; compliant with
pending TIA/EIA 785 specification
Link Pass Through (see page 15)
Status LEDs
PWR (Power)
SX-ACT (Fiber Activity)
SX-100 (Fiber Speed)
SX-10 (Fiber Speed)
TX-ACT (Copper Activity)
TX-100 (Copper Speed)
TX-10 (Copper Speed)
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
3.6 watts
Automatic Link Restoration (see page 16)
Remote Firmware Upgrade
(see page 16)
Can be used with any Point System™ Chassis
(see pages 20 & 21)
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A & B; FCC
Class A & B; CE Mark
Warranty
Lifetime
See Also:
10/100BASE-SX
Stand-Alone Media Converters
page 87
Call us at 800-526-9267 or 952-941-7600
< 39 >
point system™
slide-in-module
media converter
10/100 Bridging 10/100BASE-TX to 100BASE-X
OAM/IP-Based Remotely Managed Media Converter
OAM/IP-Based
remotely managed
CFBRM10xx-1xx
Table of Contents
Select Media Converter
Select Switch
Applications:
• Ethernet in the First Mile (EFM)
• Fiber to the Premise (FTTP), E-Line and E-LAN
• Enterprise markets
Remotely Manage 10/100 Converters
Features
MEF 9 & MEF 14 Carrier
Ethernet Certification
Ordering Info
Two selectable remote
optic connector specs.
management modes:
• IP-Based remote management
• In-Band OAM 802.3ah
(remote device managed by
local peer)
CFBRM1011-100
CFBRM1011-110 (DMI model)
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
See pages 171–181 for complete fiber
CFBRM1013-100
CFBRM1013-110 (DMI model)
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SNMP v1, v2*
AutoCross™ (see page 14)
CFBRM1014-100
CFBRM1014-110 (DMI model)
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-LX10 1310nm SM (SC)
[20 km/6.2 mi.] Link Budget: 16.0 dB
Auto-Negotiation (see page 14)
Pause (see page 15)
Transparent Link Pass Through
CFBRM1015-100
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
(see page 15)
Specifications
Far-End-Fault (see page 14)
See pages 171–181 for complete fiber optic connector specs.
Remote Loopback (see page 16)
Standards
IEEE Std. 802.3™, IEEE Std. 802.3ah,
IEEE Std. 802.1P, IEEE Std. 802.1Q,
IEEE Std. 802.1X
Data Rate
Copper: 10/100
Fiber: 100 Mbps
4 egress queues
Filtering Addresses
8K MAC Addresses
Ipv4 IP TOS and DiffServ QOS classification, IPv6
RAM Buffers
256K (2 Mb)
Traffic class
Max Frame Size
802.3ac tagged: 1628 bytes
untagged: 1632 bytes
CFBRM1035-100
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1550nm SM (SC)
[120 km/74.6 mi.] Link Budget: 36.0 dB
Dimensions
CFBRM1040-100
10/100BASE-TX (RJ-45) [100 m]
to SFP slot (empty)
Double VLAN tagging (QinQ)
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
5.1 watts
IEEE 802.1x™ Port based security
Single Fiber Products
Recommended use in pairs (see page 17)
Environment
See chassis specifications
RADIUS client
Shipping Weight
1 lb. [0.45 kg]
RMON counters for each port
Regulatory Compliance
CISPR/EN55022 Class B, EN55024,
EN61000, FCC Class B, CE Mark
Bandwidth allocation per port (see page 16)
Warranty
Lifetime
Non-Intrusive Echo
IEEE 802.1p™ QOS packet classification with
IEEE 802.1q™ VLAN, 4096 entries
Static MAC, 64 entries
DMI Optical Management
USB port for basic setup
Cable diagnostic function for TP ports
8K MAC addresses
Remote Firmware Upgrade (see page 16)
*Future firmware upgrade; Please contact Transition
Networks for upgrade availability.
See Also:
OAM/IP-Based Remotely Managed
Stand-Alone Media Converters
page 88 - 90
< 40 >
Visit our website at www.transition.com
CFBRM1016-100
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
CFBRM1017-100
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
CFBRM1029-100
CFBRM1029-110 (DMI model)
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-BX-U 1310nm TX/1550nm
RX Bi-Di single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CFBRM1029-101
CFBRM1029-111 (DMI model)
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-BX-D 1550nm TX/1310nm
RX Bi-Di SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
Note: all units feature USB port for local
management application.
Single fiber options for 40 km, 60 km,
80 km and 120 km are available upon
request. Please contact Transition
Networks.
point system™
slide-in-module
media converter
Table of Contents
Select Media Converter
Select Switch
100/1000 Bridging 100BASE-FX to 1000BASE-X
OAM/IP-Based Remotely Managed Media Converter
ethernet
fast ethernet
CFBRM13xx-1xx
10/100 bridging
100/1000 bridging
NEW
Applications:
• Ethernet in the First Mile (EFM)
• Fiber to the Premise (FTTP), E-Line and E-LAN
• Enterprise markets
Features
MEF 9 & MEF 14 Carrier
Ethernet Certification
Two selectable remote
management modes:
• IP-Based remote management
• In-Band OAM 802.3ah
(remote device managed by
local peer)
SNMP v1, v2*
AutoCross™ (see page 14)
Auto-Negotiation
Ipv4 IP TOS and DiffServ QOS
classification, IPv6 Traffic class
Remotely Manage 100/1000 Converters
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
e&m, 2/4-wire
pots 2-wire
video
IEEE 802.1q™ VLAN, 4096
entries
Static MAC, 64 entries
Double VLAN tagging (QinQ)
IEEE 802.1x™ Port based
security
RADIUS client
RMON counters for each port
Bandwidth allocation per port
(see page 16)
(see page 14)
DMI Optical Management
Pause (see page 15)
Transparent Link Pass Through
(see page 15)
Far-End-Fault (see page 14)
Remote Loopback
USB port for basic setup
Cable diagnostic function for
TP ports
8K MAC addresses
Remote Firmware Upgrade
(see page 16)
IEEE 802.1p™ QOS packet
classification with four egress
queues
(see page 16)
*Future firmware upgrade; Please
contact Transition Networks for
upgrade availability.
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™, IEEE Std. 802.3ah, IEEE Std. 802.1P,
IEEE Std. 802.1Q, IEEE Std. 802.1X
Data Rate
Fiber: 100BASE-FX
Fiber 2: 1000BASE-X
Filtering Addresses
8K MAC Addresses
RAM Buffers
256K (2 Mb)
Max Frame Size
802.3ac tagged: 1628 bytes
untagged: 1632 bytes
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
5.1 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class B, EN55024, EN61000,
FCC Class B, CE Mark
Warranty
Lifetime
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
CFBRM1313-100
CFBRM1313-110 (DMI Options)
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-SX 850nm Ext. MM (SC)
[62.5/125µm fiber: 300 m/984 ft.] or
[50/125µm fiber: 550 m/1804 ft.]
Link Budget: 7.0 dB
CFBRM1314-100
CFBRM1314-110 (DMI Options)
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-LX10 1310nm SM (SC)
[20 km/6.2 mi.] Link Budget: 12.0 dB
CFBRM1315-100
CFBRM1315-110 (DMI Options)
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 19.0 dB
CFBRM1317-100
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 22.0 dB
Single Fiber Products
Recommended use in pairs
CFBRM1329-100
CFBRM1329-110 (DMI Options)
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-BX-U 1310nm TX /
1490nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
CFBRM1329-101
CFBRM1329-111 (DMI Options)
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-BX-D 1490nm TX /
1310nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
Single fiber options for 40 km, 60 km,
80 km and 120 km are available upon
request. Please contact Transition
Networks.
Note: All units feature USB port for local
management application.
CFBRM1335-100
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-LX 1550nm SM (SC)
[125 km/77.7 mi.]
Link Budget: 27.0 dB
See Also:
OAM/IP-Based Remotely Managed
Stand-Alone Media Converters
page 88-90
Call us at 800-526-9267 or 952-941-7600
< 41 >
point system™
slide-in-module
media converter
Table of Contents
Select Media Converter
Select Switch
10/100BASE-TX Redundant Link Protector
CBFTF1010-130
Fault-Tolerant Redundant Link Protector
NEW
Fault-tolerant redundant
connections
Auto-Negotiation (see page 14)
Easy to install and use
Nine diagnostic LEDs
Supports half and full-duplex
Optional 3-port switch mode
transmission
AutoCross™ on all 3 ports
(see page 14)
IEEE 802.3 compliant
Can be used with any Point
System™ Chassis
Fault-Tolerant Redundant Connections
Features
CBFTF1010-130
10/100BASE-TX Link Protector
Transceiver
The Redundant Link Protector is a 10/100 Ethernet
fault-tolerant transceiver. It significantly reduces
network downtime, adding a new level of redundancy
to 10/100 Ethernet connections. It also provides a
redundant path for critical 10/100 devices.In a
10/100 Ethernet network, a critical device such as a
file server may be connected to the rest of the
network through a hub or a switch. A common
problem in this configuration is that the server is
often connected to the network through a single
cable. If the cable fails, then the server is
disconnected from the rest of the network. Similarly,
if a port of a hub or switch to which the server is
connected fails, the server is disconnected from the
network.
The Redundant Transceiver has three
ports: one for the critical (main) device,
one for the default (primary) path for the
critical device, and another (backup) for
the backup path. It is a smart device that
will not send any signal on a path that is
not active. If the primary path loses its
link, then the transceiver will immediately
(in less than one microsecond) switch to
the backup path.
When the primary path re-establishes its
link, the Redundant Link Protector will
automatically switch back to the primary
path.
Optional functionality, controlled via a dip
switch, allows the unit to move from the
fault-tolerant mode to a 3-port switch
mode.
The following management features are
available when the converter is used in a
managed Point System™ chassis:
Ordering Info
(3) 10/100BASE-TX (RJ-45)
[100 m]
Specifications
Standards
IEEE Std. 802.3
• Copper Link Status
RJ-45 Connectors
Type: 8-position, RJ-45 receptacle:
1: TX+
2: TX3: RX+
4: NC (no connection)
• Copper Port Speed
Dip Switches
SW1: Auto-Negotiation Enable/Disable
SW2: 10/100Mbps
SW3: Full/Half Duplex
SW4: Redundancy/Switch
System LEDs
Power (PWR): Indicates the presence of
POWER
Primary (PRI): Indicates a link is
established on the Primary port
Backup (BKP): Indicates the link has
moved over to the Backup port.
Per Port LEDs
Lower Right:
Green indicates 100Mbps;
Orange indicates 10Mbps;
Flashing indicates Activity
Lower Left:
Green indicates full-duplex; Off half-duplex
Dimensions
Width: 0.86" [12 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Read Management features:
• Media Converter Power
• Duplex Mode
• Hardware Switch Settings
Write Management features:
• Power on/off device
• Enable Redundancy / 3-port Switch
mode
Individual Port Control:
• Enable/disable Auto-Negotiation
• Force Full or Half Duplex
• Force 10Mbps or 100Mbps
5: NC (no connection)
6: RX7: NC (no connection)
8: NC (no connection)
Power Consumption 2.4 watts
See Also:
10/100 Redundant Link Protector
Stand-Alone Media Converter
page 92
< 42 >
Visit our website at www.transition.com
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory
Compliance
FCC Class A, EN55024, UL 60950,
CE Mark
Warranty
Lifetime
point system™
slide-in-module
media converter
Table of Contents
Select Media Converter
Select Switch
10/100 Bridging 10/100BASE-TX to 100BASE-FX
Extend network distance up to
120 KM: Bridging media
converters will provide
conversion and integration
solutions for half-duplex and fullduplex environments.
ethernet
fast ethernet
CBFTF10xx-10x
10/100 Bridging Media Converter
10/100 bridging
100/1000 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
e&m, 2/4-wire
pots 2-wire
video
Convert 10/100 on copper to
straight 100 on fiber.
Half or Full-Duplex on both
ports
Features
Remote Firmware Upgrade (see page 16)
Fully manageable
Source Address Change (SAC) (see page 17)
LED indications for all operation modes
Can be used with any Point System™ Chassis
Auto-Negotiation (see page 14)
Read Management Features
• Media Converter Power
• Copper & Fiber Link Status
• Copper Port Speed
• Hardware Switch Settings
AutoCross™ (see page 14)
Link Pass Through (see page 15)
Far End Fault (FEF) (see page 14)
Automatic Link Restoration (see page 16)
Specifications
Write Management Features
• Enable/disable Auto-negotiation on Copper
• Force 10Mb/s or 100Mb/s on Copper
• Force Full or Half-duplex on Copper or Fiber
• Select Advertised Modes (when AutoNegotiation is Enabled)
• Enable/disable:
- Pause
- Source Address Change
- Monitor Port (advanced filters available)
- Link Pass Through
- Far End Fault
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™
Data Rate
10Mbps; 100Mbps
Filtering Addresses
4K MAC addresses
CBFTF1011-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
CBFTF1017-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
CBFTF1013-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
CBFTF1035-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
100BASE-FX 1550nm SM (SC)
[120 km/74.6 mi.] Link Budget: 36.0 dB
CBFTF1039-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1300nm MM (LC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
Filtering & Forwarding Rate
RAM Buffers
14,880pps for Ethernet;
148,800 pps for Fast Ethernet
256KB
Max Packet Size
1536 bytes
Switches
SW1 (TP): Auto-Negotiation On/Off
SW2 (TP): 10Mbps or 100Mbps with Auto-Negotiation Off
SW3 (TP): Half or Full-duplex with Auto-Negotiation Off
SW4 (Fiber): Half or Full-duplex
SW5: AutoCross™ On/Off
SW6: Link Pass Through On/Off
Status LEDs
PWR (Power)
FD (Fiber Duplex)
LACT (Fiber Link/Activity)
Duplex/Link (Copper)
Speed (Copper)
CBFTF1018-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1300nm MM (MT-RJ)
[2 km / 1.2 mi.] Link Budget: 14.5 dB
Dimensions
Width: 0.86” [22 mm]
Depth: 5.0” [127 mm]
Height: 3.4" [86 mm]
Power Consumption
4.9 watts
Environment
See chassis specifications
CBFTF1014-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
FCC Class A, VCCI Class 1, CISPR22/EN55022 Class A,
EN55024, EN61000, CE Mark
Warranty
Lifetime
CBFTF1019-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310nm SM (LC)
[20 km/12.4 mi.] Link Budget: 17.3 dB
CBFTF1015-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
See Also:
10/100 Bridging
Stand-Alone Media Converters
pages 93 – 95
Call us at 800-526-9267 or 952-941-7600
CBFTF1016-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
CBFTF1029-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310nm TX/1550nm RX
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CBFTF1029-101
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CBFTF1029-102
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CBFTF1029-103
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
< 43 >
point system™
slide-in-module
media converter
10/100 Bridging Multiport 10/100BASE-TX to 100BASE-FX
10/100 Bridging Multiport Media Converter
Table of Contents
Select Media Converter
Select Switch
CBFTF10xx-1xx
10 or 100Mbps on all TP ports
Half or full-duplex on all ports, including fiber
Extend Network Distance
Applications
Extend network distance up to 120 KM
Bridging media converters will provide conversion and integration
solutions for half-duplex and full-duplex environments.
Features
Auto-Negotiation (see page 14)
AutoCross™ (see page 14)
Far End Fault (FEF) (see page 14)
Automatic Link Restoration (see page 16)
Each port fully manageable
Individual switches for both TP ports
(-110 only)
LED indications for all operation modes
Port mirroring mode on TX ports
Specifications
See pages 171–181 for complete fiber optic connector specs.
Remote Firmware Upgrade (see page 16)
Standards
IEEE Std. 802.3™
Source Address Change (SAC) (see page 17)
Data Rate
10Mbps; 100Mbps
Fiber Redundancy Mode (-140 only)
When failure on primary fiber occurs it is detected by a converter; fiber two
(secondary) is activated and becomes the primary link. The original fiber link (1)
is put in the disabled state. It becomes secondary until the failure on primary
Fiber occurs.
Read Management features:
• Media Converter Power
• Fiber Link Status
• Copper Link Status
• Copper Port Speed
• Hardware Switch Settings
Write Management features:
• Enable/disable Auto-negotiation on Copper
• Force 10Mb/s or 100Mb/s on Copper
• Force Full or Half-duplex on Copper
• Force Full or Half-duplex on Fiber
• Select Advertised Modes (When Auto-Negotiation is Enabled)
• Enable/disable Pause
• Enable/disable Source Address Change
• Enable/disable Monitor Port (Advanced filters available)
• Enable/disable Far End Fault
See Also:
10/100 Bridging
Stand-Alone Media Converters
pages 93 – 95
< 44 >
Visit our website at www.transition.com
Filtering Addresses
4K MAC addresses
Filtering & Forwarding Rate
14,880pps for Ethernet;
148,800 pps for Fast Ethernet
RAM Buffers
256KB
Max Packet Size
1536 bytes
Switches
SW1 (TP1): Auto-Negotiation On/Off
SW2 (TP1): 10Mbps or 100Mbps with Auto-Negotiation Off
SW3 (TP1): Half or Full-duplex with Auto-Negotiation Off
SW4 (Fiber1): Half or Full-duplex
SW5: AutoCross™ On/Off
SW6: Fiber Redundancy On/Off (xBFTF10xx-14x only)
SW7 (TP2): Auto-Negotiation On/Off
SW8 (TP2): 10Mbps or 100Mbps with Auto-Negotiation Off
SW9 (TP2): Half or Full-duplex with \Auto-Negotiation Off
SW10 (TP2): Monitor On/Off
Status LEDs
PWR (Power)
FD (Fiber Duplex)
LACT (Fiber Link/Activity)
Duplex/Link (Copper)
Speed (Copper)
Dimensions
CBFTF10xx-11x:
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
CBFTF10xx-12x & -14x:
Width: 1.72" [44 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
CBFTF10xx-11x: 4.9 watts
CBFTF10xx-12x & -14x: 9.0 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
FCC Class A, VCCI Class 1, CISPR22/EN55022 Class A,
EN55024, EN61000, CE Mark
Warranty
Lifetime
point system™
slide-in-module
media converter
10/100 Bridging Multiport 10/100BASE-TX to 100BASE-FX
Table of Contents
Select Media Converter
Select Switch
ethernet
fast ethernet
10/100 bridging
-110 models can be used with any Point System™
Chassis (see pages 20 & 21)
-120 models cannot be used with the 1-Slot Point
System™ Chassis (see pages 20 & 21)
-140 models cannot be used with the 1-Slot Point
System™ Chassis (see pages 20 & 21)
Ordering Info
Ordering Info
Ordering Info
See pages 171–181 for complete fiber optic
connector specs.
See pages 171–181 for complete fiber optic
connector specs.
See pages 171–181 for complete fiber optic
connector specs.
CBFTF1011-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1300nm multimode (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
CBFTF1011-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1300nm multimode (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
CBFTF1011-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1300nm multimode (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
CBFTF1013-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1300nm multimode (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
CBFTF1013-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1300nm multimode (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
CBFTF1013-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1300nm multimode (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
CBFTF1018-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1300nm multimode (MT-RJ)
[2 km / 1.2 mi.] Link Budget: 14.5 dB
CBFTF1018-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1300nm multimode (MT-RJ)
[2 km / 1.2 mi.] Link Budget: 14.5 dB
CBFTF1018-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1300nm multimode (MT-RJ)
[2 km / 1.2 mi.] Link Budget: 14.5 dB
CBFTF1014-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm single mode (SC)
[20 km / 12.4 mi.] Link Budget: 16.0 dB
CBFTF1014-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm single mode (SC)
[20 km / 12.4 mi.] Link Budget: 16.0 dB
CBFTF1014-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1310nm single mode (SC)
[20 km / 12.4 mi.] Link Budget: 16.0 dB
CBFTF1015-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm single mode (SC)
[40 km / 24.9 mi.] Link Budget: 26.0 dB
CBFTF1015-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm single mode (SC)
[40 km / 24.9 mi.] Link Budget: 26.0 dB
CBFTF1015-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1310nm single mode (SC)
[40 km / 24.9 mi.] Link Budget: 26.0 dB
CBFTF1016-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm single mode (SC)
[60 km / 37.3 mi.] Link Budget: 29.0 dB
CBFTF1016-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm single mode (SC)
[60 km / 37.3 mi.] Link Budget: 29.0 dB
CBFTF1016-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1310nm single mode (SC)
[60 km / 37.3 mi.] Link Budget: 29.0 dB
CBFTF1017-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1550nm single mode (SC)
[80 km / 49.7 mi.] Link Budget: 29.0 dB
CBFTF1017-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1550nm single mode (SC)
[80 km / 49.7 mi.] Link Budget: 29.0 dB
CBFTF1017-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1550nm single mode (SC)
[80 km / 49.7 mi.] Link Budget: 29.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
Single Fiber Products
Recommended use in pairs (see page 17)
Single Fiber Products
Recommended use in pairs (see page 17)
CBFTF1029-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm TX / 1550nm RX single
fiber single mode (SC)
[20 km / 12.4 mi.] Link Budget: 19.0 dB
CBFTF1029-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm TX / 1550nm RX single
fiber single mode (SC)
[20 km / 12.4 mi.] Link Budget: 19.0 dB
CBFTF1029-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1310nm TX / 1550nm RX single
fiber single mode (SC)
[20 km / 12.4 mi.] Link Budget: 19.0 dB
CBFTF1029-111
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1550nm TX / 1310nm RX single
fiber single mode (SC)
[20 km / 12.4 mi.] Link Budget: 19.0 dB
CBFTF1029-121
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1550nm TX / 1310nm RX single
fiber single mode (SC)
[20 km / 12.4 mi.] Link Budget: 19.0 dB
CBFTF1029-141
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1550nm TX / 1310nm RX single
fiber single mode (SC)
[20 km / 12.4 mi.] Link Budget: 19.0 dB
CBFTF1029-112
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm TX / 1550nm RX single
fiber single mode (SC)
[40 km / 24.9 mi.] Link Budget: 25.0 dB
CBFTF1029-122
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm TX / 1550nm RX single
fiber single mode (SC)
[40 km / 24.9 mi.] Link Budget: 25.0 dB
CBFTF1029-142
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1310nm TX / 1550nm RX single
fiber single mode (SC)
[40 km / 24.9 mi.] Link Budget: 25.0 dB
CBFTF1029-113
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1550nm TX / 1310nm RX single
fiber single mode (SC)
[40 km / 24.9 mi.] Link Budget: 25.0 dB
CBFTF1029-123
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1550nm TX / 1310nm RX single
fiber single mode (SC)
[40 km / 24.9 mi.] Link Budget: 25.0 dB
CBFTF1029-143
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1550nm TX / 1310nm RX single
fiber single mode (SC)
[40 km / 24.9 mi.] Link Budget: 25.0 dB
Call us at 800-526-9267 or 952-941-7600
100/1000 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
e&m, 2/4-wire
pots 2-wire
video
< 45 >
point system™
slide-in-module
media converter
Value 10/100 Bridging 10/100BASE-TX to 100BASE-FX
Table of Contents
Select Media Converter
Select Switch
CBFTF10xx-15x
Value 10/100 Bridging Media Converter
Low cost conversion of 10/100 copper to straight 100 on fiber
Same quality & reliability as full-featured bridging converters
Extend Network Distance
Extend Network Distance
Extend network distance up to
40 KM.
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
Cost-effective managed bridging
media converter. It provides
conversion and basic integration
for 10 or 100Mbps; half and full
duplex environments.
CBFTF1011-155
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
CBFTF1013-155
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Features
AutoCross™ (see page 14)
Auto-Negotiation
(see page 14)
CBFTF1018-155
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (MT-RJ)
[2 km/1.2 mi.] Link Budget: 14.5 dB
10Mbps or 100Mbps
Half or full-duplex on all ports
Far End Fault (FEF) Detection
(see page 14)
Specifications
LED indications for all operation modes
See pages 171–181 for complete fiber optic connector specs.
Read Management features:
Standards
IEEE Std. 802.3™; EN55022
Class A; EN55024
• Media Converter Power
Data rate
10Mbps; 100Mbps
• Copper & Fiber Link Status
Filtering Addresses
1K MAC addresses
• Copper Port Speed
Filtering & Forwarding Rate
14,880pps for Ethernet;
148,800 pps for Fast Ethernet
• Hardware Switch Settings
RAM Buffers
128KB
• Serial Number
Switches
SW1: TP1: Enable/Disable AutoNegotiation
SW2: TP1: Force Half or Full duplex
with Auto-Negotiation off
SW3: TP1: Force 10Mbps or
100Mbps with Auto-Negotiation OFF
SW4: FBR: Half or Full duplex
• Chassis Slot Number
Write Management features:
• Enable/disable Auto-Negotiation on Copper
• Force 10Mb/s or 100Mb/s on Copper
Jumpers
FEF enable/disable
Hardware/software mode
• Force Full-duplex or Half-duplex on Copper or
Fiber
Unit LED
Power: Green - ON: power applied to
board
Copper LEDs
TLNK (Link/Activity)
TDPX (Full Duplex/Collision)
TSPD (Full speed)
Fiber LEDs
FLNK (Link/Activity)
FDPX (Full Duplex/Collision)
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
4.1 watts
• Select Advertised Modes
(when Auto-Negotiation is enabled)
See Also:
Just Convert-It™ 10/100 Bridging
Stand-Alone Media Converters
pages 96
< 46 >
Visit our website at www.transition.com
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
FCC & CISPR Class A; EN55022;
EN55024; EN60950; CSA Certified;
CE Mark
Warranty
Lifetime
CBFTF1014-155
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm sM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
CBFTF1015-155
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
CBFTF1029-155
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CBFTF1029-156
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1550nm TX / 1310nm
RX single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CBFTF1029-157
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CBFTF1029-158
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1550nm TX / 1310nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
point system™
slide-in-module
media converter
10/100/1000 Ethernet 10/100/1000BASE-T to 1000BASE-SX/LX
10/100/1000 Ethernet Media Converter
Extend Network Distance
This solution offers a low-cost
integration option for network
managers who want to migrate from
10/100 networks to Gigabit Ethernet.
Gigabit only switches can now be
connected to 10/100 networks up to
125 km away over single mode fiber
or up to 80 km over single fiber
without the need to upgrade the
10/100 side; allowing network
ethernet
fast ethernet
CGFEB10xx-10x
10/100 bridging
10/100/1000
managers to add new equipment
gradually.
100/1000 bridging
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
e&m, 2/4-wire
pots 2-wire
video
In addition to the standard 220
meters with standard SX optics,
Transition Networks also offers a
proprietary solution that will allow
users to transmit up to 2 km over
multimode (62.5/125µm) fiber
(xGFEB1024-100).
Note: CGFEB cards cannot be used in the
1-Slot Point System™ Chassis
(see pages 20 & 21)
Extend Network Distance
Table of Contents
Select Media Converter
Select Switch
Features
Auto-Negotiation (see page 14)
IEEE 802.1P priority mapping
AutoCross™ on TX port
(see page 14)
Remote Firmware Upgrade
Link Pass Through (see page 15)
Automatic Link Restoration
(see page 16)
Pause (see page 15)
(see page 16)
Source Address Change (SAC)
(see page 17)
DMI, Digital diagnostics per
SFF-8472
Specifications
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3ab™, IEEE Std. 802.1P™, IEEE Std. 802.3™
Data Rate
Copper: 10/100/1000 Mbps
Fiber: 1000 Mbps
Filtering Addresses
4K MAC Addresses
RAM Buffers
256K
Dip Switches
Switch 1: TX - Enable/Disable Auto-Negotiation
Switch 2: TX - Force 10Mbs or 100Mbs with Autoneg. off
Switch 3: TX - Force Half or Full duplex with Autoneg. off
Switch 4: FBR - Enable/Disable Auto-Negotiation
Switch 5: not used
Switch 6: Enable/Disable LPT
Jumpers
Status LEDs
Jumper (ED): Enable/Disable AutoCross™
Jumper (HS):
Hardware: Converter mode is determined by 6-position
switch settings
Software: Converter mode is determined by most recently
saved on-board microprocessor settings
TP (Duplex/Link/Activity):
Yellow: ON = Half-duplex Link; BLINK = Activity;
Green: ON = Full-duplex Link; BLINK = Activity
TP (10Mbs/100Mbs/1000Mbs):
Off = 10Mbs; Yellow = 100Mbs; Green = 1000Mbs
DPX (Fiber Duplex):
Green: ON = Full; OFF = Half
LACT (Fiber Link/Activity):
Green: ON = Link; BLINK = Activity
PWR (Power): Green: ON = Power applied to board
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
6.5 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A, EN55024, EN61000, FCC Class A,
CE Mark
Warranty
Lifetime
CGFEB1013-100
10/100/ 1000BASE-T (RJ-45) [100 m]
to 1000BASE-SX 850nm multimode (SC)
[62.5/125µm: 220 m/722 ft.]
[50/125µm: 550 m/1804 ft.]
Link Budget: 7.0 dB
CGFEB1024-100
10/100/ 1000BASE-T (RJ-45) [100 m]
to 1000BASE-LX 1310nm Extended MM
(62.5/125 µm fiber only) (SC)
[up to 2 km] Link Budget: 7.0 dB
CGFEB1014-100
10/100/ 1000BASE-T (RJ-45) [100 m]
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
CGFEB1015-100
10/100/ 1000BASE-T (RJ-45) [100 m]
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB
CGFEB1017-100
10/100/ 1000BASE-T (RJ-45) [100 m]
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 20.0 dB
CGFEB1035-100
10/100/ 1000BASE-T (RJ-45) [100 m]
to 1000BASE-LX 1550nm SM (SC)
[125 km/77.7 mi.] Link Budget: 27.0 dB
CGFEB1029-101
10/100/ 1000BASE-T (RJ-45) [100 m]
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
CGFEB1029-102
10/100/ 1000BASE-T (RJ-45) [100 m]
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
CGFEB1029-103
10/100/ 1000BASE-T (RJ-45) [100 m]
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
CGFEB1029-104
10/100/ 1000BASE-T (RJ-45) [100 m]
to 1000BASE-LX 1510nm TX / 1590nm
RX single fiber single mode (SC)
[80 km/49.6 mi.] Link Budget: 24.0 dB
CGFEB1029-105
10/100/ 1000BASE-T (RJ-45) [100 m]
to 1000BASE-LX 1590nm TX / 1510nm
RX single fiber single mode (SC)
[80 km/49.6 mi.] Link Budget: 24.0 dB
See pages 135 & 136 for Compatible SFP
Modules.
CGFEB1040-100
10/100/ 1000BASE-T (RJ-45) [100 m]
to 1000BASE-X SFP Slot (empty)
See right for SFP modules.
Single Fiber Products
Recommended use in pairs (see page 17)
CGFEB1029-100
10/100/ 1000BASE-T (RJ-45) [100 m]
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
Call us at 800-526-9267 or 952-941-7600
< 47 >
point system™
slide-in-module
media converter
10/100/1000 Ethernet 10/100/1000BASE-T to 1000BASE-SX/LX
with built-in
fiber tap
CGFEB10xx-11x
10/100/1000 Ethernet with built-in Fiber Tap
Table of Contents
Select Media Converter
Select Switch
Convert
10/100/1000
Copper to Fiber &
Monitor Critical
Network Segments
Product size distorted for demonstration purposes.
Features
802.1P Priority Mapping
Auto-Negotiation (see page 14)
1000BASE-SX Tap Port
AutoCross™ (see page 14)
Fiber tap clones traffic; offering complete
access to network traffic at line rate.
Link Pass Through (see page 15)
Pause (see page 15)
Automatic Link Restoration (see page 16)
Remote Firmware Upgrade (see page 16)
No latency associated with the fiber tap
No dB loss on fiber. Active device does not
compromise optical budget to monitor network
performance.
Users can view all fiber traffic including faults &
timing errors.
SNMP managed TX or RX monitoring
CGFEB cards cannot be used in the 1-slot Point
System™ Chassis (see pages 20 & 21)
Source Address Change (SAC) (see page 17)
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3ab™, IEEE Std. 802.1P™,
IEEE Std. 802.3™
Data Rate
Copper: 10/100/1000 Mbps
Fiber: 1000 Mbps
Filtering Addresses
4K MAC Addresses
RAM Buffers
256K
Dip Switches
Switch 1: TX - Enable/Disable AutoNegotiation
Switch 2: TX - Force 10Mbs or 100Mbs
with Auto-Negotiation off
Switch 3: TX - Force Half or Full duplex
with Auto-Negotiation off
Switch 4: FBR - Enable/Disable AutoNegotiation
Switch 5: not used
Switch 6: Enable/Disable LPT
Jumpers
Jumper (ED): Enable/Disable
AutoCross™
Jumper (HS):
Hardware: Converter mode is
determined by 6-position switch
settings
Software: Converter mode is
determined by most recently saved onboard microprocessor settings
Status LEDs
TP (Duplex/Link/Activity)
TP (10Mbs/100Mbs/1000Mbs)
DPX (Fiber Duplex)
LACT (Fiber Link/Activity)
PWR (Power)
Dimensions
Width: 1.68" [43 mm]
Depth: 4.91" [125 mm]
Height: 3.42" [87 mm]
Power Consumption
6.5 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A, EN55024,
EN61000, FCC Class A, CE Mark
Warranty
Lifetime
< 48 >
Visit our website at www.transition.com
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
CGFEB1013-110
Port 1 10/100/ 1000BASE-T (RJ-45) [100 m/328 ft.]
Port 2 1000BASE-SX 850nm multimode (SC)
[220/550 m/722/1804 ft.]* Link Budget: 7.0 dB
Port 3 1000BASE-SX 850nm multimode (SC)
[220/550 m/722/1804 ft.]* Link Budget: 7.0 dB
CGFEB1024-110
Port 1 10/100/ 1000BASE-T (RJ-45) [100 m/328 ft.]
Port 2 1000BASE-SX 1310nm Extended multimode
(62.5/125µm fiber only) (SC) [up to 2 km]
Link Budget: 7.0 dB
Port 3 1000BASE-SX 850nm multimode (SC)
[220/550 m/722/1804 ft.]* Link Budget: 7.0 dB
CGFEB1014-110
Port 1 10/100/ 1000BASE-T (RJ-45) [100 m/328 ft.]
Port 2 1000BASE-LX 1310nm single mode (SC)
[10 km / 6.2 mi.] Link Budget: 7.0 dB
Port 3 1000BASE-SX 850nm multimode (SC)
[220/550 m/722/1804 ft.]* Link Budget: 7.0 dB
CGFEB1015-110
Port 1 10/100/ 1000BASE-T (RJ-45) [100 m/328 ft.]
Port 2 1000BASE-LX 1310nm single mode (SC)
[25 km / 15.5 mi.] Link Budget: 15.0 dB
Port 3 1000BASE-SX 850nm multimode (SC)
[220/550 m/722/1804 ft.]* Link Budget: 7.0 dB
CGFEB1017-110
Port 1 10/100/ 1000BASE-T (RJ-45) [100 m/328 ft.]
Port 2 1000BASE-LX 1550nm single mode (SC)
[65 km / 40.4 mi.] Link Budget: 20.0 dB
Port 3 1000BASE-SX 850nm multimode (SC)
[220/550 m/722/1804 ft.]* Link Budget: 7.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
CGFEB1029-110
Port 1 10/100/ 1000BASE-T (RJ-45) [100 m/328 ft.]
Port 2 1000BASE-LX 1310nm TX / 1550nm RX single
fiber single mode (SC)
[20 km / 12.4 mi.] Link Budget: 13.0 dB
Port 3 1000BASE-SX 850nm multimode (SC)
[220/550 m/722/1804 ft.]* Link Budget: 7.0 dB
CGFEB1029-111
Port 1 10/100/ 1000BASE-T (RJ-45) [100 m/328 ft.]
Port 2 1000BASE-LX 1550nm TX / 1310nm RX single
fiber single mode (SC)
[20 km / 12.4 mi.] Link Budget: 13.0 dB
Port 3 1000BASE-SX 850nm multimode (SC)
[220/550 m/722/1804 ft.]* Link Budget: 7.0 dB
*62.5/125µm fiber: 220 m / 722 ft.;
50/125µm fiber: 550 m / 1804 ft.
point system™
slide-in-module
media converter
10/100/1000 Bridging 10/100/1000BASE-TX to 1000BASE-X
OAM/IP-Based Remotely Managed Media Converter
CBFFG10xx-1xx
NEW
Table of Contents
Select Media Converter
Select Switch
10/100/1000
Applications:
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
e&m, 2/4-wire
pots 2-wire
video
• Ethernet in the First Mile (EFM)
• Fiber to the Premise (FTTP), E-Line and E-LAN
• Enterprise markets
Remotely Manage 10/100/1000 Converters
Features
MEF 9 & MEF 14 Carrier
Ethernet Certification
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
Two selectable remote
CBFFG1013-100
CBFFG1013-110 (DMI Options)
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-SX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 7.0 dB
management modes:
• IP-Based remote management
• In-Band OAM 802.3ah
(remote device managed by
local peer)
CBFFG1014-100
CBFFG1014-110 (DMI Options)
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
SNMP
AutoCross™ (see page 14)
CBFFG1015-100
CBFFG1015-110 (DMI Options)
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB
Auto-Negotiation (see page 14)
Pause (see page 15)
Transparent Link Pass Through (see page 15)
Far-End-Fault (see page 14)
Remote Loopback
(see page 16)
CBFFG1017-100
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 21.0 dB
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™, IEEE Std. 802.3ah,
IEEE Std. 802.1P, IEEE Std. 802.1Q,
IEEE Std. 802.1X
IEEE 802.1p™ QOS packet classification with
4 egress queues
Data Rate
Copper: 10/100/1000
Fiber: 1000 Mbps
Ipv4 IP TOS and DiffServ QOS classification, IPv6
Filtering Addresses
8K MAC Addresses
Traffic class
RAM Buffers
256K (2 Mb)
IEEE 802.1q™ VLAN, 4096 entries
Max Frame Size
802.3ac tagged: 1628 bytes
untagged: 1632 bytes
Static MAC, 64 entries
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
VLAN Tunneling
Power Consumption
5.1 watts
IEEE 802.1x™ Port based security
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class B, EN55024,
EN61000, FCC Class B, CE Mark
Warranty
Lifetime
Non-Intrusive Echo
Double VLAN tagging (QinQ)
RADIUS client
RMON counters for each port
Bandwidth allocation per port (see page 16)
DMI Optical Management
USB port for basic setup
Cable diagnostic function for TP ports
ethernet
fast ethernet
10/100 bridging
100/1000 bridging
CBFFG1035-100
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-LX 1550nm SM (SC)
[120 km/77.7 mi.] Link Budget: 27.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
CBFFG1029-100
CBFFG1029-110 (DMI Options)
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-BX-U 1310nm TX/1550nm
RX Bi-Di SM (SC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
CBFFG1029-101
CBFFG1029-111 (DMI Options)
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-BX-D 1550nm TX/1310nm
RX Bi-Di SM (SC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
CBFFG1029-102
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-LX 1310nm TX/1550nm RX
Bi-Di SM (SC)
[40 km/24.8 mi.] Link Budget: 20.0 dB
CBFFG1029-103
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-LX 1550nm TX/1310nm RX
Bi-Di SM (SC)
[40 km/24.8 mi.] Link Budget: 20.0 dB
Note: all units feature USB port for local
management application.
8K MAC addresses
Remote Firmware Upgrade (see page 16)
*Future firmware upgrade; Please contact Transition
Networks for upgrade availability.
See Also:
10/100/100 OAM/IP-Based Remotely
Managed Stand-Alone Media Converters
pages 101-102
Call us at 800-526-9267 or 952-941-7600
< 49 >
point system™
slide-in-module
media converter
1000BASE Bridging 1000BASE-X to 1000BASE-X
OAM/IP-Based Remotely Managed Media Converter
Table of Contents
Select Media Converter
Select Switch
CBFFG13xx-1xx
NEW
Applications:
• Ethernet in the First Mile (EFM)
• Fiber to the Premise (FTTP), E-Line and E-LAN
• Enterprise markets
Features
MEF 9 & MEF 14 Carrier
Ethernet Certification
Two selectable remote
management modes:
• IP-Based remote management
• In-Band OAM 802.3ah
(remote device managed by
local peer)
Ipv4 IP TOS and DiffServ QOS
classification, IPv6 Traffic class
Remotely Manage 1000BASE Converters
IEEE 802.1q™ VLAN, 4096
entries
Static MAC, 64 entries
Double VLAN tagging (QinQ)
IEEE 802.1x™ Port based
security
SNMP v1, v2*
RADIUS client
Auto-Negotiation
RMON counters for each port
(see page 14)
Bandwidth allocation per port
Pause (see page 15)
(see page 16)
Transparent Link Pass Through
DMI Optical Management
Ordering Info
(see page 15)
USB port for basic setup
See pages 171–181 for complete fiber optic connector specs.
Far-End-Fault (see page 14)
8K MAC addresses
Remote Loopback
Remote Firmware Upgrade
(see page 16)
(see page 16)
IEEE 802.1p™ QOS packet
*Future firmware upgrade; Please
contact Transition Networks for
upgrade availability.
CBFFG1313-100
CBFFG1313-110 (DMI Options)
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
classification with four egress
queues
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™, IEEE Std. 802.3ah, IEEE Std. 802.1P, IEEE
Std. 802.1Q, IEEE Std. 802.1X
Data Rate
Fiber: 1000BASE-X
Fiber 2: 1000BASE-X
Filtering Addresses
8K MAC Addresses
RAM Buffers
256K (2 Mb)
Max Frame Size
802.3ac tagged: 1628 bytes
untagged: 1632 bytes
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
5.1 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class B, EN55024, EN61000,
FCC Class B, CE Mark
Warranty
Lifetime
See Also:
1000BASE Bridging, OAM/IP-Based
Remotely Managed Stand-Alone Media
Converters
pages 101-102
< 50 >
Visit our website at www.transition.com
CBFFG1314-100
CBFFG1314-110 (DMI Options)
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-LX10 1310nm SM (SC)
[10 km / 6.2 miles]
CBFFG1315-100
CBFFG1315-110 (DMI Options)
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-LX 1310nm SM (SC)
[30 km / 18.6 miles]
CBFFG1317-100
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-LX 1550nm SM (SC)
[65 km / 40.4 miles]
CBFFG1335-100
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-LX 1550nm SM (SC)
[120 km / 74.6 miles]
CBFFG1340-100
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-X SFP Slot (Empty)
Single Fiber Products
Recommended use in pairs (see page 17)
CBFFG1329-100
CBFFG1329-110 (DMI Options)
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-BX-U 1310nm TX /
1490nm RX single fiber SM (SC)
[20 km / 12.4 miles]
CBFFG1329-101
CBFFG1329-111 (DMI Options)
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-BX-D 1490nm TX /
1310nm RX single fiber SM (SC)
[20 km / 12.4 miles]
*[220 m/722 ft.: 62.5/125µm fiber]
*[550 m/1804 ft.: 50/125µm fiber]
point system™
slide-in-module
media converter
10/100/1000 802.3ah Bridging 10/100/1000BASE-T to 1000BASE-X
10/100/1000 802.3ah Bridging Media Converter
CMEFG10xx-1xx
ethernet
fast ethernet
10/100 bridging
100/1000 bridging
10/100/1000
gigabit ethernet
Applications
• Ethernet in the First Mile (EFM)
• Fiber to the Premise (FTTP), E-Line and E-LAN
• Enterprise markets
Remote Link Loss detection &
notification
Features
IEEE 802.3ah™ compliant
RMON Statistics
In-band OAM management
(Operation, Administration &
Maintenance)
Automatic Link Restoration
(see page 16)
10/100/1000Mbs Auto-Negotiation
or forced mode operation on the TP
interface (see page 14)
Fiber Auto-Negotiation
enable/disable to support legacy
devices (see page 14)
AutoCross™ (see page 14)
Transparent Link Pass Through
(see page 15)
QoS Management
Static VLANs
Remotely Manage 10/100/1000 Converters
Symmetric and Asymmetric Pause
(see page 15)
Remote Loopback assists in
diagnosing network problems (per
802.3ah) (see page 16)
Bandwidth allocation: Upstream
and downstream in 64KB increments
(see page 16)
Remote Firmware Upgrade
(see page 16)
DMI management interface for
optical monitoring of temperatures
and power on -110 models.
802.1Q VLAN Tagging
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™; IEEE Std. 802.3ah™;
IEEE Std. 802.1P; IEEE Std. 802.1Q
Data Rate
Copper: 10/100/1000 Mbps
Fiber: 1000 Mbps
Filtering Addresses
4K MAC Addresses
RAM Buffers
256K (2 Mb)
Status LEDs
TP (Duplex/Link/Activity)
TP (10Mbs/100Mbs/1000Mbs)
DPX (Fiber Duplex)
LACT (Fiber Link/Activity)
PWR (Power)
Dimensions
Table of Contents
Select Media Converter
Select Switch
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
e&m, 2/4-wire
pots 2-wire
video
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
5.1 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A, EN55024, EN61000,
FCC Class A, CE Mark
Warranty
Lifetime
Note: CMEFG cards cannot be used in the 1-Slot Point System™
Chassis (see pages 20 & 21)
See Also:
10/100/1000 802.3ah Bridging
Stand-Alone Media Converters
page 103
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
CMEFG1013-100: Link Budget: 7.0 dB
CMEFG1013-110 (with DMI mgmt.)
Link Budget: 8.5 dB
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-SX 850nm multimode (SC)
[62.5/125 µm: 220 m/722 ft.]
[50/125 µm: 550 m/1804 ft.]
CMEFG1039-100
CMEFG1039-110 (with DMI mgmt.)
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-SX SFP Bundle: 850nm
multimode (LC)
[62.5/125 µm: 220 m/722 ft.]
Link Budget: 7.5 dB
[50/125 µm: 550 m/1804 ft.]
Link Budget: 7.5 dB
CMEFG1019-100
CMEFG1019-110 (with DMI mgmt.)
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX SFP Bundle: 1310nm
single mode (LC)
[10 km/6.2 mi.] Link Budget: 11.5 dB
CMEFG1014-100: Link Budget: 7.0 dB
CMEFG1014-110 (with DMI mgmt.)
Link Budget: 12.0 dB
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX-10 1310nm SM (SC)
[10 km/6.2 mi.]
CMEFG1015-100: Link Budget: 15.0 dB
CMEFG1015-110 (with DMI mgmt.)
Link Budget: 19.0 dB
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[30 km/18.6 mi.]
CMEFG1017-100
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 21.0 dB
CMEFG1035-100
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1550nm SM (SC)
[120 km/74.6 mi.] Link Budget: 27.0 dB
CMEFG1040-100
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-X SFP Slot (empty)
See page 135-136 for SFP modules.
Single Fiber Products
Recommended use in pairs (see page 17)
CMEFG1029-100: Link Budget: 14.0 dB
CMEFG1029-110 (with DMI mgmt.)
Link Budget: 11.0 dB
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-BX-U 1310nm TX / 1490nm
RX single fiber single mode (SC)
[20 km/12.4 mi.]
CMEFG1029-101: Link Budget: 14.0 dB
CMEFG1029-111 (with DMI mgmt.)
Link Budget: 11.0 dB
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-BX-D 1490nm TX / 1310nm
RX single fiber single mode (SC)
[20 km/12.4 mi.]
CMEFG1029-102
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-BX-U 1310nm TX / 1490nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
CMEFG1029-103
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-BX-D 1490nm TX / 1310nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
Single fiber options for 40 km, 60 km,
80 km and 120 km are available upon
request. Please contact Transition
Networks.
Call us at 800-526-9267 or 952-941-7600
< 51 >
point system™
slide-in-module
media converter
Gigabit Ethernet 1000BASE-T to 1000BASE-SX/LX
Gigabit Ethernet Media Converter
Table of Contents
Select Media Converter
Select Switch
CGETF10xx-11x
NEW
Migrate to Gigabit Ethernet in a
cost-effective manner.
Used in conjunction with lower cost
1000BASE-T switches, companies can
take advantage of the high bandwidth
Gigabit Ethernet offers without all of
the higher costs.
Transition Networks’s 1000BASE-T to
SX/LX converters allow users to
extend the bandwidth to those users
outside the reach of the 1000BASE-T
standard (up to 125 km).
Migrate to Gigabit Ethernet
Features
Copper & Fiber Auto-Negotiation (see page 14)
Transparent Link Pass Through (see page 15)
Automatic Link Restoration (see page 16)
Remote Fault Detect (see page 17)
Loopback (see page 16)
Pause (see page 15)
Remote Firmware Upgrade (see page 16)
DMI - Diagnostic Monitoring Interface
SFP supporting DMI is used.
supported on CGETF1040-110 when an
DMI models have four functions:
• Transmit Power
• Receive Power
• Transmit bias current
• Temperature
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
Within each function, the device will send a trap (i.e. error) whenever a high or
low warning event or a high or low alarm event occurs (for a total of 16 traps).
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3ab™ and IEEE Std. 802.3™
6-position Switch
SW1: Remote Fiber Fault Detect (Down=Enabled)
SW2: Symmetric Pause
SW3: Asymmetric Pause
SW4: Transparent Link Pass Through (UP=Enabled)
SW5: Fiber Auto-Negotiation (Down=Enabled)
SW6: Loopback (Down=Enabled)
3-position Jumper
Hardware: Converter mode is determined by 6-position
switch settings
Software: Converter mode is determined by most recently
saved on-board microprocessor settings.
Status LEDs
PWR (Power): ON=connection to external AC power
LKF (Fiber Link): ON=fiber connection
RXC (Copper Receive): Flashing=Receiving data on copper
link; ON=Copper Link connection
Duplex: ON=Copper Link connection
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
5.4 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A + EN55024; FCC Class A; CE Mark
Warranty
Lifetime
CGETF1039-110
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-SX 850nm multimode (LC)
via SFP
[62.5/125µm fiber: 220 m/722 ft.]
LInk Budget: 8.0 dB
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 8.0 dB
CGETF1024-110
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm Extended MM
(62.5/125µm fiber only) (SC)
[2 km/1.2 mi.] Link Budget: 7.0 dB
CGETF1014-110
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
CGETF1015-110
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB
CGETF1017-110
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 21.0 dB
CGETF1035-110
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1550nm SM (SC)
[125 km/77.7 mi.] Link Budget: 27.0 dB
CGETF1040-110
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-X SFP Slot (empty)
See Also:
Gigabit Ethernet
Stand-Alone Media Converters
page 104
< 52 >
CGETF1013-110
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m/722 ft.]
LInk Budget: 7.0 dB
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
Visit our website at www.transition.com
Single Fiber Products
Recommended use in pairs
CGETF1029-110
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
CGETF1029-111
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
CGETF1029-112
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
CGETF1029-113
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
point system™
slide-in-module
media converter
Gigabit Ethernet/Fibre Channel 1000BASE-SX to 1000BASE-LX
Gigabit Ethernet/Fibre Channel Optical Mode Converter
optical
mode conversion
ethernet
fast ethernet
10/100 bridging
100/1000 bridging
10/100/1000
CFMFF1xxx-22x
gigabit ethernet
Used individually or in pairs, this media converter can extend Gigabit
Ethernet over single mode fiber up to 125 km. Convert 1000BASE-SX
ports on a Gigabit Ethernet switch to 1000BASE-LX on a port-by-port
basis. Ideal for campus area networks or other applications requiring
the distance advantages of single mode fiber.
Table of Contents
Select Media Converter
Select Switch
Extend Network Distance
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
e&m, 2/4-wire
pots 2-wire
video
Features
Link Pass Through (page 15)
Automatic Link Restoration
Card manageability:
• Multimode signal detect
(see page 16)
• Hardware/software mode
Protocol Transparency
• Fiber port enable/disable
multimode
Extended Multimode SX
capability (up to 2 km
62.5/125µm fiber)
• Fiber port enable/disable single
mode
Specifications
Remote Firmware Upgrade
See pages 171–181 for complete fiber optic connector specs.
(see page 16)
Can be used with any Point
System™ Chassis
Standards
IEEE Std. 802.3™
3-position Jumper
Hardware: Software mode is disabled.
Software: Converter mode is determined by most recently
saved on-board microprocessor settings.
Ordering Info
Status LEDs
PWR (Power): Steady green LED indicates connection to
external AC power
LKS (Single mode fiber link): Steady LED indicates single
mode fiber link
LKM (Multimode fiber link): Steady LED indicates
multimode fiber link
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
CFMFF1313-220
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget 7.0 dB
to 1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget 7.0 dB
Power Consumption
3.5 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
UL LIsted; C-UL Listed (Canada); CISPR/EN55022
Class A & B + EN55024; FCC Class A & B; CE Mark
Warranty
Lifetime
See pages 171–181 for complete fiber optic connector specs.
CFMFF1324-220
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget 7.0 dB
to 1000BASE-LX 1310nm Extended MM
(62.5/125µm fiber only) (SC)
[up to 2 km] Link Budget: 7.0 dB
CFMFF1424-220
1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
to 1000BASE-LX 1310nm Extended MM
(62.5/125µm fiber only) (SC)
[up to 2 km] Link Budget: 7.0 dB
CFMFF1314-220
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
CFMFF1414-220
1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
CFMFF1315-220
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB
See Also:
Gigabit Ethernet
Stand-Alone Media Converters
page 106
CFMFF1317-220
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1310nm SM (SC)
[65 km/40.4 mi.] Link Budget: 20.0 dB
CFMFF1335-220
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1550nm SM (SC)
[125 km/77.7 mi.] Link Budget: 27.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
CFMFF1329-220
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
CFMFF1329-221
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
CFMFF1329-222
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
CFMFF1329-223
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
Call us at 800-526-9267 or 952-941-7600
< 53 >
point system™
slide-in-module
media converter
Gigabit Ethernet 1000BASE-SX to 1000BASE-LX
Gigabit Media Converter with Signal Retiming & Regeneration
Transition Networks's Gigabit
Ethernet optical mode converters now
include signal retiming, regeneration
and re-amplification to maintain signal
integrity and allow for maximum
network distance without signal
degradation.
Convert 1000BASE-SX ports over to
1000BASE-LX on a port-by-port
basis. Used individually or in pairs,
this media converter can extend
Gigabit Ethernet over single mode
fiber up to 125 km. Or cascade two
or more converters in a link to
achieve even greater distances.
Features
Auto-Negotiation (see page 14)
Link Pass Through (see page 15)
Automatic Link Restoration
(see page 16)
Pause (see page 15)
CFMFF13xx-28x
Can be used with any Point
System™ Chassis (pages 20 & 21)
Management Features
Report local converter status to
chassis management software:
• Converter power status
• Hardware/Software mode
status
• Single Mode and Multimode
link status
• Auto-Negotiation, Link Pass
Through and Pause settings.
Write operation includes:
• Power on/off converter
• Enable/disable Single Mode
port
• Enable/disable Multimode port
• Enable/disable Auto-Negotiation
• Enable/disable Link Pass
Through
• Select Pause Advertisement(s)
Extend Network Distance
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
(see page 16)
CFMFF1324-280
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1310nm Extended MM
(SC) (62.5/125µm fiber only)
[up to 2 km] Link Budget: 7.0 dB
Extended multimode SX capability
(up to 2 km 62.5/125µm fiber)
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™
Status LEDs
PWR (Power): Lit for normal operation
LKS (Single Mode Fiber Link): ON = Fiber Link
LKM (Multimode Fiber Link): ON = Fiber Link
ACT (Activity): Blinking = data reception on either fiber link
Switches
Switch 1: Fiber Auto-Negotiation on/off
Switch 2: Link Pass Through on/off
Switch 3&4: Pause configuration determined by combined
setting
3-position Jumper
Hardware: Converter mode is determined by DIP switch
settings
Software: Converter mode is determined by most recently
saved on-board microprocessor settings
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
3.5 watts
Environment
0 – 50°C operating;
5% – 95% humidity non-condensing;
0 – 10,000 ft. altitude
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
EN55024; CISPR22/EN55022 Class A; FCC Class A; CE Mark
Warranty
Lifetime
CFMFF1314-280
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 33.0 dB
CFMFF1414-280
1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
CFMFF1315-280
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB
CFMFF1317-280
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 21.0 dB
CFMFF1335-280
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1550nm SM (SC)
[125 km/77.7 mi.] Link Budget: 27.0 dB
See Also:
Gigabit Ethernet Optical Mode
Stand-Alone Media Converters
*[62.5/125µm fiber: 220 m / 722 ft.];
*[50/125µm fiber: 550 m / 1804 ft.]
page 107
< 54 >
Table of Contents
Select Media Converter
Select Switch
Distances of hundreds of
kilometers are possible when
cascading two or more devices in the
same link.
Remote Firmware Upgrade
Dimensions
with signal retiming
/regeneration
Visit our website at www.transition.com
Single Fiber Products
Recommended use in pairs (see page 17)
CFMFF1329-280
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
CFMFF1329-281
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
CFMFF1329-282
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
CFMFF1329-283
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
CFMFF1329-286
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1510nm TX / 1590nm
RX single fiber single mode (SC)
[80 km/49.6 mi.] Link Budget: 24.0 dB
CFMFF1329-287
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1590nm TX / 1510nm
RX single fiber single mode (SC)
[80 km/49.6 mi.] Link Budget: 24.0 dB
point system™
slide-in-module
media converter
Gigabit Ethernet Mode Conditioning Cable
Gigabit Ethernet Media Converter Accessory
Table of Contents
Select Media Converter
Select Switch
ethernet
fast ethernet
10/100 bridging
100/1000 bridging
10/100/1000
1000MCC-1
Corporate, industrial or education campuses can now utilize the
multimode infrastructure already in place. Users can now upgrade their
networks to Gigabit speeds in the most economical manner.
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
e&m, 2/4-wire
pots 2-wire
video
Low Cost Alternative to Recabling
Extend Gigabit Ethernet over
multimode cable up to 500 meters*
when used in conjunction with
xFMFF1314-220, xGETF1014-110 or
xGFEB1014-100. It can also extend the
distance up to 2 km* when used in
conjunction with xFMFF1315-220,
xGFEB1015-100 or xGETF1015-110.
Low cost alternative to recabling
IEEE-802.3z compliant Gigabit Mode
Conditioning cable allows network
managers to upgrade their multimode
backbone to gigabit speeds without
costly recabling.
The Mode Conditioning Cable eliminates
the effects of Differential Mode Delay
(DMD) by providing an offset launch of
the single mode core, into the 62.5 or
50 µm multimode core.
Alternative solution to Gigabit products
with “24” connector designation for
distances up to 2 km on multimode
fiber.
*Distances not guaranteed. Distance
extension is largely dependent on
quality of fiber and connectors.
Ordering Info
1000MCC-1
Mode Conditioning Cable 62.5/50µm
(1 meter cable length); SC connectors
CFMFF1314-220 (see page 53)
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
to 1000BASE-LX 1310nm SM (SC)
[500 m/1640 ft.]
SFMFF1314-220 (see page 106)
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
to 1000BASE-LX 1310nm SM (SC)
[500 m/1640 ft.]
SFMFF1315-220 (see page 106)
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
to 1000BASE-LX 1310nm SM (SC)
[2 km / 1.2 mi.]
Standards
IEEE Std. 802.3z™
Connectors
SC
Warranty
Lifetime
To be used in conjunction
with any of the following converters:
To be used in conjunction with any of the following converters:
CFMFF1315-220 (see page 53)
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
to 1000BASE-LX 1310nm SM (SC)
[2 km / 1.2 mi.]
Specifications
1000MCC-1LC
Mode Conditioning Cable
62.5/50µm (1 meter cable length);
SC to LC connectors
CGETF1014-110 (see page 52)
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[500 m/1640 ft.]
SGETF1014-110 (see page 104)
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[500 m/1640 ft.]
CGETF1015-110 (see page 52)
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[2 km / 1.2 mi.]
SGETF1015-110 (see page104)
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[2 km / 1.2 mi.]
TN-SFP-LX1 (see page 135)
(model with DMI)
1000BASE-LX 1310nm (LC) SM
[500 m/1640 ft.]
Link Budget: 11.5 dB
TN-SFP-LX3 (see page 135)
1000BASE-LX 1310nm (LC) SM
[2 km / 1.2 mi.]
Link Budget: 19.0 dB
CGFEB1014-100 (see page 47)
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[500 m/1640 ft.]
SGFEB1014-100 (see page 100)
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[500 m/1640 ft.]
CGFEB1015-100 (see page 47)
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[2 km / 1.2 mi.]
SGFEB1015-100 (see page 100)
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[2 km / 1.2 mi.]
Connect Single Mode connector from
the cable to TX port of an LX
converter.
Distances not guaranteed. Distance
extension is largely dependent on
quality of fiber and connectors.
Call us at 800-526-9267 or 952-941-7600
< 55 >
point system™
slide-in-module
media converter
Optical Line Converter with SFP slots
CFMFF4040-100
Small Form Factor Pluggable Conversion
Universal platform to
accommodate any optical
conversion options available via
SFP interfaces.
These converters offer an
excellent upgrade path for
networks. Today’s Fast Ethernet
applications can be upgraded to
Gigabit speeds tomorrow with a
simple SFP swap. The converter
remains installed, managed and
fully operational at any of these
speeds.
(2) SFP Slots for SFP interfaces
Protocol Transparency
Enterprise Application
Ordering Info
CFMFF4040-100
SFP Slot (empty) to SFP Slot (empty)
See Pages 135 & 136 for Compatible SFP
Modules.
Service Provider Application
Two SFP module slots allow for
seamless connectivity between
different wavelengths or fiber
modes for speeds up to 2.5Gbps.
Protocol independence allows for
use in broad range of applications
including Fast and Gigabit
Ethernet, FDDI, ESCON, SONET
OC-3, OC-12, OC-24 and Fibre
Channel.
Digital diagnostics provide vital
information about the state of
your optical connection.
Specifications
Standards
Multi-Source Agreement (MSA); Small
Form Factor Pluggable (SFP) Status
Features
LEDs
LK1: Link on Port 1
LK2: Link on Port 2
PWR: Power
allowing for cost-effective transponder functionality.
Link Pass Through (see page 15)
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
DMI, Digital diagnostics per SFF-8472
Power Consumption
Preconfigured bundles with SFP modules
2 watts with TN-SFP-xx modules
installed
Environment
See chassis specifications
Regulatory Compliance
FCC Class A; EN55024 (CISPR 22)
Class A; ICES-003; CISPRB; CE Mark
Warranty
Lifetime
CWDM and DWDM SFP-ready platform
installed.
Automatic Link Restoration (see page 16)
Remote Firmware Upgrade
(see page 16)
Can be used with any Point System™ Chassis
(see pages 20 & 21)
Optical Intrusion Detection
Monitor the physical layer of optical networks for
signal strength degradation. The user can specify the
threshold for sudden signal strength deterioration.
Such a change often indicates a physical intrusion or
fiber damage.
See Also:
Stand-Alone Optical Line Converters
page 109
< 56 >
Table of Contents
Select Media Converter
Select Switch
Visit our website at www.transition.com
point system™
slide-in-module
media converter
OC12 ATM/SONET/SDH Single Mode to Multimode
Single Mode to Multimode Media Converter
Table of Contents
Select Media Converter
Select Switch
ethernet
fast ethernet
10/100 bridging
100/1000 bridging
10/100/1000
CFMFF1xxx-21x
gigabit ethernet
atm/oc-x
Connect single mode fiber cable to devices with multimode ports
Protocol Transparency
Can be used with any Point System™ Chassis (see pages 20 & 21)
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
e&m, 2/4-wire
pots 2-wire
video
Features
OC-12 over SONET/SDH or ATM
Link Pass Through (see page 15)
Automatic Link Restoration (see page 16)
Remote Firmware Upgrade
(see page 16)
Card manageability:
• Multimode/Single Mode signal detect
• Hardware/software mode
• Fiber port enable/disable multimode
• Fiber port enable/disable single mode
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™
3-position Jumper
Hardware: Software mode disabled.
Software: Converter mode is determined by most recently
saved on-board microprocessor settings.
Status LEDs
PWR (Power): Steady green LED indicates connection to
external AC power
LKS (Single mode fiber link): Steady LED indicates single
mode fiber link
LKM (Multimode fiber link): Steady LED indicates
multimode fiber link
Dimensions
Power Consumption
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
3.5 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
UL Listed; C-UL Listed (Canada); CISPR/EN55022 Class A;
FCC Class A; CE Mark
Warranty
Lifetime
See Also:
OC12 ATM/SONET/SDH
Stand-Alone Media Converters
page 111
Call us at 800-526-9267 or 952-941-7600
Extend Network Distance
Convert multimode 622
Mbps interfaces to single
mode fiber on a port-by-port
basis and extend ATM or
SONET over single mode
fiber up to 60 km.
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
CFMFF1314-210
622 Mbps fiber optic 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 12.0 dB
to 622 Mbps fiber optic 1310nm
single mode (SC)
[15 km/9.3 mi.] Link Budget: 11.0 dB
CFMFF1329-213
622 Mbps fiber optic 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 7.0 dB
to 622 Mbps 1550nm TX / 1310nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 22.0 dB
CFMFF1316-210
622 Mbps fiber optic 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 12.0 dB
to 622 Mbps fiber optic 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CFMFF1429-210
622 Mbps fiber optic 1310nm SM (SC)
[15 km/9.3 mi.] Link Budget: 13.0 dB
to 622 Mbps 1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
CFMFF1317-210
622 Mbps fiber optic 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 7.0 dB
to 622 Mbps fiber optic 1550nm SM (SC)
[60 km/37.3 mi.] Link Budget: 25.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
CFMFF1329-210
622 Mbps fiber optic 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 7.0 dB
to 622 Mbps 1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
CFMFF1329-211
622 Mbps fiber optic 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 7.0 dB
to 622 Mbps 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
CFMFF1429-211
622 Mbps fiber optic 1310nm SM (SC)
[15 km/9.3 mi.] Link Budget: 13.0 dB
to 622 Mbps 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
CFMFF1429-212
622 Mbps fiber optic 1310nm SM (SC)
[15 km/9.3 mi.] Link Budget: 13.0 dB
to 622 Mbps 1310nm TX / 1550nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 23.0 dB
CFMFF1429-213
622 Mbps fiber optic 1310nm SM (SC)
[15 km/9.3 mi.] Link Budget: 13.0 dB
to 622 Mbps 1550nm TX / 1310nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 22.0 dB
CFMFF1329-212
622 Mbps fiber optic 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 7.0 dB
to 622 Mbps 1310nm TX / 1550nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 23.0 dB
< 57 >
point system™
slide-in-module
media converter
Table of Contents
Select Media Converter
Select Switch
DS3-T3/E3 Coax to Fiber
CCSCF30xx-10x
DS3-T3/E3 Coax to Fiber Media Converter
Extend a DS3 or E3 over fiber
Integrate Voice & Data on Fiber Network
The DS3-T3/E3 copper to fiber
media converter will provide a
solution for those users that
desire to extend the point of
presence of their DS3 or E3
Connection or use it to connect
remote locations via T3/E3.
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
CCSCF3011-100
(2) Coax (BNC)
to 1300nm multimode (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
Features
CCSCF3013-100
(2) Coax (BNC)
to 1300nm multimode (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
Upgrade from Multiple T1
AIS (Alarm Indication Signal) All
1’s or Blue detected on both ports.
(unframed)
AIS generated in both directions
CCSCF3018-100
(2) Coax (BNC)
to 1300nm multimode (MT-RJ)
[2 km / 1.2 mi.] Link Budget: 14.5 dB
selectable Blue or 1’s.
Digital Loopback on fiber & copper
ports
CCSCF3014-100
(2) Coax (BNC)
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Coax Line build out for operation
less than 255 feet or 255 feet to 1000
feet.
Specifications
Switch selectable DS3/T3 or E3 rate
Remote Firmware Upgrade (see page 16)
LED indications for all operation modes
Supports fractional/channelized DS3/E3
See pages 171–181 for complete fiber optic connector specs.
Standards
ANSI, ITU-TS, AT&T, ETSI, G.703,
G.921 and G.956
Switches
SW1: DS3/E3 selector: On for E3
SW2: Coax Line build out: On for less
than 255 feet of cable
SW3: AIS (unframed) transmit: On for
transmit AIS if receive loss of carrier
SW4: AIS Blue/AIS All 1’s:
On for Blue alarm
Front Switch: Right/Left – loop-back
fiber/copper, Center – Normal
Reporting features:
• Report converter status to chassis management
software:
• Coax & Fiber Link status
• Line Build out
• DS3/T3/E3 mode
• Hardware/Software mode
• Coax & Fiber AIS
• Local Coax & Fiber Loopback
Jumpers
Write operation includes:
• Coax Loopback
• Fiber Loopback
Status LEDs
See Also:
DS3-T3/E3
Stand-Alone Media Converters
page 112
< 58 >
CCSCF3015-100
(2) Coax (BNC)
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
Visit our website at www.transition.com
Jumper (J3): Hardware/Software
mode
Jumper (J11): Connect output coax
port to chassis ground (per G.703)
Jumper (J12): Connect input coax
port to chassis ground (per G.703)
Power: On for normal operation
SDC copper: Green – Link is up;
Green Flashing – Coax is in loop-back
mode; Yellow – AIS (unframed)
detected.
SDC Fiber: Green – Link is up; Green
Flashing – Fiber is in loop-back mode;
Yellow – AIS (unframed) detected.
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
6.0 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A; FCC Class A;
CE Mark
Warranty
Lifetime
CCSCF3016-100
(2) Coax (BNC)
to 1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
CCSCF3017-100
(2) Coax (BNC)
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
CCSCF3029-100
(2) Coax (BNC)
to 1310nm TX / 1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CCSCF3029-101
(2) Coax (BNC)
to 1550nm TX / 1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CCSCF3029-102
(2) Coax (BNC)
to 1310nm TX / 1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CCSCF3029-103
(2) Coax (BNC)
to 1550nm TX / 1310nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
point system™
slide-in-module
media converter
with remote
management
High Speed Serial: V.35 / X.21 / RS449 / RS530 / RS232
Remotely Managed High Speed Serial Media Converter
CPSVT26xx-10x
Table of Contents
Select Media Converter
Select Switch
Connect High Speed Serial signals on copper to fiber
Supports multiple protocols through the use of a universal 26-pin
ethernet
fast ethernet
10/100 bridging
100/1000 bridging
10/100/1000
gigabit ethernet
atm / oc-x
ds3-t3/e3
high speed serial
serial interface connector.
Extend the point of presence of a copper V.35 / X.21 / RS449 /
rs232
rs422/485
t1/e1
e&m, 2/4-wire
pots 2-wire
video
RS530 / RS232 connection at data rates up to 10 Mbps.
Features
Supports remote management of a stand-alone converter
Copper & Fiber Loopback
Extend Distance Between Routers
(see page 16)
LED indications for Fiber Link, Loopback & Data
Ability to use a combination of any copper interface
(RS449 to V.35, RS530 to X.21, DTE-DTE, DTE-DCE, DCE-DCE, etc.)
All interfaces converted at the physical level.
Synchronous or asynchronous capability
Remote Firmware Upgrade
(see page 16)
Management Features
Report converter status to chassis
management software
• Local Fiber Link status
• Local/Remote Hardware/Software
mode
• Local/Remote Speed select
• Local/Remote Loopback
• Local/Remote Cable type
reporting, near end
• Local/Remote Clock polarity
setting
Write operation includes:
• Local or Remote Loopback
• Local or Remote Speed Select
See pages 171–181 for complete fiber optic connector specs.
Standards
ITU-T; ISO-2593
Data Rate
1.2 Kb/s to 10 Mb/s
Switches
Side panel, external DCE speed switch, sixteen position:
Jumpers
Status LEDs
Dimensions
See pages 171–181 for complete fiber optic connector specs.
CPSVT2611-100
26-pin
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Specifications
• 0 – TT = Receive CLK
• 1 – 56 Kbps
• 2 – 64 Kbps
• 3 – 112 Kbps
• 4 – 128 Kbps
• 5 – 256 Kbps
• 6 – 384 Kbps
• 7 – 512 Kbps
Ordering Info
• 8 – 768 Kbps
• 9 – 1.024 Mbps
• A – 1.544 Mbps
• B – 2.048 Mbps
• C – 3.072 Mbps
• D – 4.096 Mbps
• E – 6.144 Mbps
• F – Asynchronous Mode
Speeds can also be set on
DCE converters locally or
remotely via software.
Front Panel, Loop-back
Selector Switch:
Right Position: Loop Fiber
Back & Loop Copper Back
Left Position: Normal
Operation
Jumper (J4): Hardware/Software mode
Jumper (J6): RX Clock Polarity: Set to sample the receive
data on the rising or falling edge of the receive clock.
Jumper (J7): TX Clock Polarity: Set to sample the transmit
data on the rising or falling edge of the receive clock.
Smart Serial Link: Green - Link is up;
Green Flashing - In loop-back mode;
Fiber: Green - Link is up;
Green Flashing - In loop-back mode;
Power: Green - ON power applied to board
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
5.0 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022, EN55024, EN60950 Class A; FCC Class A;
CE Mark
Warranty
Lifetime
Call us at 800-526-9267 or 952-941-7600
CPSVT2613-100
26-pin
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
CPSVT2614-100
26-pin
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
CPSVT2629-100
26-pin
to 1310nm TX / 1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CPSVT2629-101
26-pin
to 1550nm TX / 1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CPSVT2629-102
26-pin
to 1310nm TX / 1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CPSVT2629-103
26-pin
to 1550nm TX / 1310nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
Cable Assemblies
[cable length: 3 meters / 10 feet]
21DCE-3
DB-15 (FT) (26-pin) to (DCE) [3 m/10 ft.]
21DTE-3
DB-15 (MT) (26-pin) to (DTE) [3 m/10 ft.]
232DCE-3
DB-25 (FT) (26-pin) to (DCE) [3 m/10 ft.]
232DTE-3
DB-25 (MT) (26-pin) to(DTE) [3 m/10 ft.]
35DCE-3
V.35 (FT) (26-pin) to (DCE) [3 m/10 ft.]
35DTE-3
V.35 (MT) (26-pin) to (DTE) [3 m/10 ft.]
449DCE-3
DB-37 (FT) (26-pin) to (DCE) [3 m/10 ft.]
449DTE-3
DB-37 (MT) (26-pin) to (DTE) [3 m/10 ft.]
530DCE-3
DB-25 (FT) (26-pin) to (DCE) [3 m/10 ft.]
530DTE-3
DB-25 (MT) (26-pin) to (DTE) [3 m/10 ft.]
Copper Distances
Standard
Range*
RS232/V.24
15 meters
RS449/V.36
1.2 km
V.35
600 meters
X.21
1.2 km
RS530
1.2 km
*For reference only. Contact Transition
Networks for detailed range information.
< 59 >
point system™
slide-in-module
media converter
RS232 Copper to Fiber
Table of Contents
Select Media Converter
Select Switch
with remote
management
Remotely Managed RS232 Media Converter
CRS2F311x-100
Ideal for campus or business environments where remote devices
can be networked in a point-to-point configuration and distances are
greater than the 15 meter limitation of conventional copper serial
cables.
Extend Network Distance
Extend Network Distance
Link a remote terminal to a host
computer: Connect multiple
devices, such as security
scanners, POS devices, remote
terminals and building
access/alarming systems to a
host computer.
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
CRS2F3111-100
DB-9 [15 m/49 ft.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Transition Networks's serial
RS232 to Fiber Media Converter
allows you to extend the distance
between serial connections with
the use of fiber optic cable. This
full-featured converter transmits
the full complement of RS232
flow control/handshaking signals
optically and supports full or halfduplex asynchronous data
transmission at speeds up to
115Kb/s.
CRS2F3113-100
DB-9 [15 m/49 ft.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
CRS2F3114-100
DB-9 [15 m/49 ft.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
CRS2F3115-100
DB-9 [15 m/49 ft.]
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
The diagnostic features included on this converter make installation easy and intuitive. A
DTE/DCE switch eliminates the frustration over selecting the appropriate cable. A Loopback
switch allows for complete diagnostic testing prior to system turn-up or during
troubleshooting. Unit and Port LEDs allow for quick status information of the converter.
Features
Read/write access to remote stand-alone
unit
Local or Remote Loopback
on copper and fiber (see page 16)
DTE/DCE switch for easy installation
with straight-through cabling
Full/Half-duplex asynchronous
transmission at speeds up to 115Kb/s
Supports the following flow control
signaling:
1. DCD - Data Carrier Detect
2. RXD - Receive Data
3. TXD - Transmit Data
4. DTR - Data Terminal Ready
5. SG - Signal Ground
6. DSR - Data Set Ready
7. RTS - Request To Send
8. CTS - Clear To Send
Remote Firmware Upgrade
(see page 16)
< 60 >
Management Features
Report converter status to chassis
management software:
• Local Fiber Link status
• Local/Remote Hardware/Software mode
• Local/Remote Loopback
• Local/Remote DTE/DCE mode
• Local/Remote link status
Write operation includes:
• Local Loopback
• Remote Loopback
Can be used with any Point System™
Chassis (see pages 20 & 21)
See Also:
RS232
Stand-Alone Media Converters
pages 114 – 115
Visit our website at www.transition.com
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
EIA/TIA-574, EIA/TIA RS-232E
Data Rate
115 Kb/s
Switches
DTE/DCE: Select appropriate position
Loop-back: Norm = normal operation;
Loop = Fiber and copper loop-back
Status LEDs
P (Power): Lit for normal operation
RX: Steady = Copper Link;
Flashing = Rx Data
FL: Steady = Fiber Link;
Flashing = Loop back mode
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
5.0 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR22/EN55022 Class A + EN55024;
EN60950 Class A; FCC Class A; CE
Mark
Warranty
Lifetime
point system™
slide-in-module
media converter
Table of Contents
Select Media Converter
Select Switch
RS422/485 Copper to Fiber
RS422/485 Copper to Fiber Media Converter
ethernet
fast ethernet
10/100 bridging
100/1000 bridging
10/100/1000
gigabit ethernet
atm / oc-x
ds3-t3/e3
high speed serial
CRS4F3x1x-100
Ideal for campus or business environments where remote devices
can be networked in either a point-to-point or point to multi-point
configuration.
rs232
rs422/485
Link a remote terminal to a host computer.
Connect multiple devices, such as security
scanners, POS devices, remote terminals and
building access/alarming systems to a host
computer.
Extend Network Distance
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
CRS4F3111-100
DB-9 [1.2 km/0.7 mi.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Transition Networks's serial RS-422/485 to
Fiber Media Converter allows you to extend the
distance between serial connections with the
use of fiber optic cable. This full-featured
converter operates in 2-wire mode for RS-422
and either 2-wire or 4-wire mode for RS-485
and supports full or half-duplex data
transmission at speeds up to 1.25 Mb/s.
Connect Multiple Devices
CRS4F3113-100
DB-9 [1.2 km/0.7 mi.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
CRS4F3114-100
DB-9 [1.2 km/0.7 mi.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Features
RS422 or RS485 operation
CRS4F3115-100
DB-9 [1.2 km/0.7 mi.]
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
2-wire or 4-wire in operation in RS-485 mode
Full/Half-duplex transmission at speeds up to
CRS4F3211-100
Terminal Block [1.2 km/0.7 mi.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
1.25 Mb/s
Remote Firmware Upgrade
t1/e1
e&m, 2/4-wire
pots 2-wire
video
(see page 16)
Can be used with any Point System™ Chassis
(see pages 20 & 21)
Specifications
Standards
EIA/TIA RS-422, EIA/TIA RS-485
Management Features
Report converter status to chassis
management software:
• Local Fiber Link status
• Receive data activity on the copper link
• Local Switch settings
• 130 ohm resistor on Rx
• 130 ohm resistor on Tx
• 1k ohm "pull down"
• 1k ohm "pull up"
• 2-wire / 4-wire operation
• RS-485 / RS-422 operation
Switches
SW1: 130 ohm resistor Rx
(Down = enable)
SW2: 130 ohm resistor Tx
(Down = enable)
SW3: 1k ohm "pull-down"
(Down = enable)
SW4: 1k ohm "pull-up"
(Down = enable)
SW5: 2-wire / 4-wire
(Down = 4-wire)
SW6: RS-485 / RS-422
(Down = RS-422)
See pages 171–181 for complete fiber optic connector specs.
Status LEDs
PWR: Power: Lit for normal operation
RXC: Steady = Data Rx on copper link;
Flashing = Rx Data at low speed
RXF: Steady = Fiber Link
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
5.0 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR22/EN55022; EN55024;
EN60950 Class A; FCC Class A;
CE Mark; UL 1950
Warranty
Lifetime
CRS4F3213-100
Terminal Block [1.2 km/0.7 mi.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
CRS4F3214-100
Terminal Block [1.2 km/0.7 mi.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
CRS4F3215-100
Terminal Block [1.2 km/0.7 mi.]
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
See Also:
RS422/485
Stand-Alone Media Converters
page 116
Call us at 800-526-9267 or 952-941-7600
< 61 >
point system™
slide-in-module
media converter
T1/E1 Copper to Fiber
Remotely Managed T1/E1 Media Converter
with remote
management
Table of Contents
Select Media Converter
Select Switch
CSDTFx0xx-1xx
The Remotely Managed T1/E1 copper to fiber media converter will provide a
solution for users who desire to extend their T1 or E1 circuits over fiber and
remotely manage them “in-band” from admin locations.
Features
Provide Campus Interconnects
Remote in-band management
With the exception of
Ethernet, T1/E1 is one of
the most common
campus/ metropolitan
area networking
interconnects. A copper to
fiber conversion on the
premise side of the T1/E1
makes it easier to
integrate voice traffic,
frame relay or IP type
traffic on your fiber
network.
Remote Management
Stand-alone can be
managed remotely when
used with a managed
chassis.
(see page 15)
Local or Remote Loopbacks on copper or fiber in software mode
(see page 16)
Loopback
switch facilitates local installation
Converts the copper ports on T1/E1 devices, such as a PBX or
T1/E1 Router, to multimode or single mode fiber
Switch selectable RJ-48 connectors for T1 or E1
Jitter attenuators optimize Bit Error Rate (BER) performance
Network debug procedures make BER testing more convenient
Built-in troubleshooting with the addition of a
selectable TAOS (Transmit All Ones) switch on the fiber and copper
interfaces allows the network engineer to test all T1/E1 equipment on
that network segment and ensure the network link
Dry Relay Contacts enable the media converter to be tied into a
separate alarm circuit commonly found in a T1/E1 twisted pair
environment. Contacts will be activated on loss of power or loss of
fiber link.
Remote Firmware Upgrade (see page 16)
LED provides Alarm Indication Signal (AIS)
Can be used with fractional T1/E1 circuits
Point System™ Management Features
Report local or remote converter status
• Copper & Fiber Link status
• Hardware switch settings: LBO, AIS Copper, AIS Fiber, HW/SW
• AIS detected Copper & Fiber
• Model Number
• Copper & Fiber Connector
Extend T1 Networks
Extend T1 to other
buildings in a campus or
MAN from 2 km to 80 km
for voice or data
applications.
Local or remote command operations include:
• Loopback Copper & Fiber
• AIS transmitted on Fiber on loss of Copper link
• AIS Transmitted on Copper on loss of Fiber link
• Boot-load firmware
See next page for Ordering Info
See Also:
T1/E1
Stand-Alone Media Converters
pages 117 – 118
< 62 >
Visit our website at www.transition.com
point system™
slide-in-module
media converter
T1/E1 Copper to Fiber
Table of Contents
Select Media Converter
Select Switch
with remote
management
ethernet
fast ethernet
10/100 bridging
100/1000 bridging
10/100/1000
gigabit ethernet
atm / oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
CSDTF1011-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 850nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 13.5 dB
CSDTF3011-115
(2) Coax (BNC) [100 m / 328 ft.]
850nm multimode (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
CSDTF1013-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 850nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 13.5 dB
CSDTF3013-115
(2) Coax (BNC) [100 m / 328 ft.]
850nm multimode (SC)
[2 km / 1.2 mi.] Link Budget: 13.5 dB
CSDTF1018-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1300nm multimode (MT-RJ)
[2 km/1.2 mi.] Link Budget: 14.5 dB
CSDTF3018-115
(2) Coax (BNC) [100 m / 328 ft.]
1300nm multimode (MT-RJ)
[2 km / 1.2 mi.] Link Budget: 14.5 dB
CSDTF1027-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1300nm multimode (ST)
[5 km / 3.1 mi.] Link Budget: 13.5 dB
CSDTF3027-115
(2) Coax (BNC) [100 m / 328 ft.]
1300nm multimode (ST)
[5 km / 3.1 mi.] Link Budget: 13.5 dB
CSDTF1012-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
1310nm single mode (ST)
[8 km / 5 mi.] Link Budget: 7.0 dB
CSDTF3012-115
(2) Coax (BNC) [100 m / 328 ft.]
1310nm single mode (ST)
[8 km / 5 mi.] Link Budget: 7.0 dB
CSDTF1022-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1310nm single mode (ST)
[15 km / 9.3 mi.] Link Budget: 10.0 dB
CSDTF3022-115
(2) Coax (BNC) [100 m / 328 ft.]
1310nm single mode (ST)
[15 km / 9.3 mi.] Link Budget: 10.0 dB
CSDTF1014-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
CSDTF3014-115
(2) Coax (BNC) [100 m / 328 ft.]
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
CSDTF1015-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 30.0 dB
CSDTF3015-115
(2) Coax (BNC) [100 m / 328 ft.]
1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 30.0 dB
CSDTF1016-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 33.0 dB
CSDTF3016-115
(2) Coax (BNC) [100 m / 328 ft.]
to 1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 33.0 dB
CSDTF1017-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
CSDTF3017-115
(2) Coax (BNC) [100 m / 328 ft.]
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
Single Fiber Products
Recommended use in pairs (see page 17)
CSDTF1029-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1310nm TX / 1550nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CSDTF3029-115
(2) Coax (BNC) [100 m / 328 ft.]
to 1310nm TX / 1550nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CSDTF1029-106
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1550nm TX / 1310nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CSDTF3029-116
(2) Coax (BNC) [100 m / 328 ft.]
to 1550nm TX / 1310nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CSDTF1029-107
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1310nm TX / 1550nm RX single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CSDTF3029-117
(2) Coax (BNC) [100 m / 328 ft.]
to 1310nm TX / 1550nm RX single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CSDTF1029-108
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1550nm TX / 1310nm RX single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CSDTF3029-118
(2) Coax (BNC) [100 m / 328 ft.]
to 1550nm TX / 1310nm RX single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
Call us at 800-526-9267 or 952-941-7600
t1/e1
e&m, 2/4-wire
pots 2-wire
video
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
ITU-T, ANSI, AT&T, ETSI
Switches
SW1: 1, 2, 3: Line Build out for short
haul/DB in Long Haul (see table)
Short Haul mode:
SW1: Pos 4 not used
SW2 - 1: Transmit all ones into copper
on loss of fiber link (Up = Disabled)
SW2 - 2: Transmit all ones (AIS) into
fiber on loss of copper link (Up =
Disabled)
SW2 - 3: Long Haul/Short Haul
(Up = Short Haul)
SW2 - 4: T1/E1 selection (Up = T1)
3-position Jumper
Hardware: Converter mode is
determined by 4-position switch
settings
Software: Converter mode is
determined by most recently saved onboard microprocessor settings.
Status LEDs
PWR (Power): Steady green LED
indicates connection to external AC
power
SDC (Signal Detect/Copper): On
indicates twisted pair link is up
SDF (Signal Detect/Fiber): On indicates
fiber link is up
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0v [127 mm]
Height: 3.4" [86 mm]
Power Consumption
6.0 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A; FCC Class A;
CE Mark
Warranty
Lifetime
< 63 >
point system™
slide-in-module
media converter
Table of Contents
Select Media Converter
Select Switch
4x T1/E1/J1 Copper to Fiber Transport Mux
C4TEF10xx-10x
4x T1/E1/J1 Copper to Fiber Transport Mux
Low cost transport capability:
(4) T1/E1/J1 and (1) RS232 data channel line
Target applications of the converter include: FTTx, such as Fiber-to-the-Business, Fiberto-the-Building, Fiber-to-the-MDU and Fiber-to-the-Home.
The product provides physical layer status
monitoring and alarm classification functions
for Telecom operators to manage their fiber
optic network and reduce operation and
maintenance costs.
Application
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
Note: RS-232 cable included with each
card (6-pin DIN to DB-9)
Copper connections are compatible with
G.703 and AMI/B8ZS/HDB3; while the optical
connection will run at 155Mbps. A hardwarebased solution guarantees the constant bit
rate of TDM transport without requiring
traffic management.
C4TEF1011-100
1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
C4TEF1013-100
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
Features
Automatic Link Restoration (see page 16)
Remote Management (see page 15)
Local and Remote Loopback (see page 16)
AIS/TAOS
LEDs for each data port
DIP switches for line code, line length,
local loopback or remote loopback
T1/E1/J1 mode settings
Dry Relay Contacts on each TDM port
Mirror Port (SNMP selectable)
Local (AUX) Management Interface (RS232 connector)
Switch selection for Data or Management mode on RS232
Access to complete status information on local and remote
device
Access to local and remote configuration
Switch or SNMP selected Baud rate operation
Remote Firmware Upgrade (see page 16)
C4TEF1014-100
1310nm single mode (SC)
[20 km/12.4 mi.]
Link Budget: 16.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
Specifications
See pages 171–181 for complete fiber optic connector specs.
AMI/B8ZS/HDB3; G.703
Telecordia TR-NWT-001089: FCC Part
68, UL1459; ITU-T, ANSI, AT&T, ETSI;
TBR 12; PD 7024: 1994 (NTR 4)
Switches
Numerous switch settings for line
coding, line buildout, loopback (per
port), AIS setting, data/mgmt RS-232
and RS-232 port speed and parity
C4TEF1017-100
1550nm single mode (SC)
[80 km/49.7 mi.]
Link Budget: 29.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
Jumper
Hardware: Converter mode is
determined by DIP switch settings
Software: Converter mode is
controlled by the most recently saved,
on-board microprocessor settings.
C4TEF1035-100
1550nm single mode (SC)
[120 km/74.6 mi.]
Link Budget: 36.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
Dimensions
Width: 1.72" [44 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
6.0 watts
Local command operations include:
• Loopback Fiber & T1/E1 per channel
• AIS TX on fiber on loss of copper link & AIS TX on copper on
loss of fiber link
• Serial connection speed and parity
(Software Mode)
• T1/E1 Mirror Port Modes (Port Trapping)
• Boot-load firmware upgrades
Remote converter status:
• Fiber Link status
• Copper Link Status for each T1/E1
• Hardware switch settings: LBO, AIS on C/F, HW/SW, speed
• AIS detected Fiber & Copper
• Model Number
• Copper & Fiber Connectors
Remote Commands:
• Loopback Fiber & T1/E1 per channel
• Serial connection speed and parity (Software Mode)
• AIS TX on fiber on loss of copper link & AIS TX on copper on
loss of fiber link
< 64 >
Visit our website at www.transition.com
C4TEF1016-100
1310nm single mode (SC)
[60 km/37.3 mi.]
Link Budget: 29.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
Standards
SNMP Management Features
Report local converter status:
• Fiber Link Status
• Copper Link Status for each T1/E1
• Hardware switch settings: LBO, AIS on C/F, HW/SW, speed
• AIS detected Fiber & Copper
• Model Number
• Copper & Fiber Connectors
C4TEF1015-100
1310nm single mode (SC)
[40 km/24.9 mi.]
Link Budget: 26.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
Single Fiber Products
Recommended use in pairs (see page 17)
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
FCC Class A; VCCI Class A; EN 55022
(CISPR 22) Class A; ICES-003
Warranty
Lifetime
Note: C4TEF cards cannot be used with the 1-Slot Point
System™ Chassis (pages 20 & 21)
See Also:
4x T1 Transport Mux
Stand-Alone Media Converters
page 119
C4TEF1029-100
1310nm TX/1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
C4TEF1029-101
1550nm TX / 1310nm RX single
fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
C4TEF1029-102
1310nm TX / 1550nm RX single
fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
C4TEF1029-103
1550nm TX / 1310nm RX single
fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
point system™
slide-in-module
media converter
4x T1/E1/J1 + 10/100 Ethernet Copper to Fiber Transport Mux
4x T1/E1/J1 + 10/100 Ethernet Transport Mux
Low cost transport capability:
(4) T1/E1/J1; (1) Ethernet and (1) RS232
data channel line
Target applications include: FTTx, such
as Fiber-to-the-Business, Fiber-to-theBuilding, Fiber-to-the-MDU and Fiber-tothe-Home.
Copper connections compatible with
G.703, AMI/B8ZS/HDB3, 10/100BASE-TX,
and RS232 channel; while the optical
connection runs at 155Mbps.
TDM traffic is not mapped to Ethernet.
A hardware-based solution guarantees the
constant bit rate of TDM transport without
requiring traffic management. Provides
physical layer status monitoring and alarm
classification functions for Telecom
operators to manage their fiber optic
network and reduce operation and
maintenance costs.
SNMP Management Features
Report local converter status:
• Fiber Link Status
• Copper Link Status for each T1/E1
• Hardware switch settings: LBO, AIS on
C/F, HW/SW, speed
• AIS detected Fiber & Copper
• Model Number
• Copper & Fiber Connectors
Features
Auto-Negotiation for 10/100BASE-TX
(page 14)
AutoCross™ (auto MDI/MDI-X) (page 14)
Transparent Link Pass Through for
Ethernet (page 15)
Automatic Link Restoration (page 16)
Pause (Flow Control) (see page 15)
Remote Management (see page 15)
Local and Remote Loopback (page 16)
Remote Fiber Loss Signaling
AIS/TAOS
LEDs for each data port
DIP switches for line code, line length,
local loopback or remote loopback
T1/E1/J1 mode settings
Dry Relay Contacts on each TDM port
Local (AUX) Management Interface
(RS232 connector)
Switch selection for Data or Management
mode on RS232 interface
Access to complete status information
on local and remote device
Access to local and remote configuration
Switch or SNMP selected Baud rate
operation
802.1Q VLAN Management
Remote Firmware Upgrade (see page 16)
t1 / e1
e&m, 2/4-wire
pots 2-wire
video
Application
Remote converter status:
• Fiber Link status
• Copper Link status for each T1/E1
• Hardware switch settings: LBO, AIS on
C/F, HW/SW, speed
• AIS detected Fiber & Copper
• Model Number
• Copper & Fiber Connectors
Remote Commands:
• Loopback Fiber & T1/E1 per channel
• Serial connection speed and parity
(Software Mode)
• AIS TX on fiber on loss of copper link
& AIS TX on copper on loss of fiber link
• T1/E1 Monitor Modes
• Ethernet settings (Software Mode):
• Force speeds and modes on
10/100TX
• Enable/Disable: Auto-Negotiation;
Link Pass Through; Flow Control;
& AutoCross™
IEEE Std. 802.3™ 2003; Telecordia TR-NWT-001089: FCC
Part 68, UL1459; ITU-T, ANSI, AT&T, ETSI; TBR 12; PD
7024: 1994 (NTR 4); AMI/B8ZS/HD83; G.703
Numerous switch settings for line coding, line buildout,
loopback (per port), AIS setting, data/mgmt RS-232, RS-232
port speed and parity;
Ethernet port settings: Auto-Negotiation, Force speed/duplex
and enable Transparent Link Pass Through
Jumper
Hardware: Converter mode is determined by DIP switch
settings
Software: Converter mode is controlled by the most recently
saved, on-board microprocessor settings.
Dimensions
Width: 1.72" [44 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
ethernet
fast ethernet
10/100 bridging
100/1000 bridging
10/100/1000
gigabit ethernet
atm / oc-x
ds3-t3/e3
high speed serial
rs232
rs422 / 485
• Loopback Fiber & T1/E1 per channel
• AIS TX on fiber on loss of copper link
& AIS TX on copper on loss of fiber link
• Serial connection speed and parity
(Software Mode)
• T1/E1 Mirror Port Modes
• Boot-load firmware upgrades
• Ethernet settings:
• Auto-Negotiation Enable/Disable
• Force speeds and modes on
10/100TX
See pages 171–181 for complete fiber optic connector specs.
Switches
Table of Contents
Select Media Converter
Select Switch
Local command operations include:
Specifications
Standards
C4TEF10xx-11x
6.0 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
FCC Class A; VCCI Class A; EN 55022 (CISPR 22) Class A;
ICES-003
Warranty
Lifetime
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
Note: RS-232 cable included with each card (6-pin DIN to DB-9)
C4TEF1011-110
1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
C4TEF1035-110
1550nm single mode (SC)
[120 km/74.6 mi.] Link Budget: 36.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
C4TEF1013-110
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
Single Fiber Products
Recommended use in pairs (see page 17)
C4TEF1014-110
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
C4TEF1015-110
1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
C4TEF1016-110
1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
C4TEF1017-110
1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
C4TEF1029-110
1310nm TX/1550nm RX single fiber
SM (SC) [20 km/12.4 mi.] LB: 19.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
C4TEF1029-111
1550nm TX/1310nm RX single fiber
SM (SC) [20 km/12.4 mi.] LB: 19.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
C4TEF1029-112
1310nm TX/1550nm RX single fiber
SM (SC) [40 km/24.9 mi.] LB: 25.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
C4TEF1029-113
1550nm TX/1310nm RX single fiber
SM (SC) [40 km/24.9 mi.] LB: 25.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
Note: C4TEF cards cannot be used with the 1-Slot Point System™ Chassis
(pages 20 & 21)
Call us at 800-526-9267 or 952-941-7600
< 65 >
point system™
slide-in-module
media converter
Table of Contents
Select Media Converter
Select Switch
2/4-wire, Leased Line, E&M Copper to Fiber
2/4-wire, Leased Line, E&M Media Converter
The Transition E&M or 2/4-wire
phone line converter is intended
to connect central-office voice
grade signals to distant legacy
PBX equipment utilizing E&M
signaling.
CEMTF10xx-10x
Voice Grade Signal to Fiber
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
CEMTF1011-100
Twisted Pair (RJ-45) [5 km 3.1 mi.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
The E&M control circuits enable
the audio transmission and
provide a contact closure at the
distant end. The electrical
interface is provided through an
RJ-45 female connector. Supports
2 or 4 wire voice path and E&M
signaling types I, II, III, IV and V.
Settings can be changed via
internal jumpers.
CEMTF1013-100
Twisted Pair (RJ-45) [5 km 3.1 mi.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
CEMTF1014-100
Twisted Pair (RJ-45) [5 km 3.1 mi.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
CEMTF1015-100
Twisted Pair (RJ-45) [5 km 3.1 mi.]
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
Features
Specifications
Supports E&M signaling types I, II, III, IV and V
See pages 171–181 for complete fiber optic connector specs.
Signaling types selectable via internal jumpers
Analog Port Standards Compliance
TIA/EIA 464B,ANSI T1.409-1996,
ANSI TR.5
Supports 2/4 wire voice path
The electrical interface is provided through a
RJ-45 female connector
Standards Compliance
FCC Part 68; EIA/TIA-464-B
E&M Signaling Types
I, II, III, IV and V by option Jumpers
Voice frequency
300Hz – 3KHz
E&M Analog copper port RJ-45
Remote Firmware Upgrade
(see page 16)
Max. Loop Length
2000 ohms
Status LEDs
LED colors are Green
SDF (Fiber Link): On indicates fiber
link up;
ACT (Active): On indicates Local unit
Off Hook;
PWR (Power): On indicates power is
on
Note: CEMTF cards cannot be used with the
1-Slot Point System Chassis™ (pages 20 & 21)
< 66 >
Visit our website at www.transition.com
Dimensions
Width: 2.9" [74 mm]
Depth: 4.8" [122 mm]
Height: 1.4" [36 mm]
Power Consumption
7 watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Emissions Compliance
FCC Class A; VCCI Class A; EN 55022
(CISPR 22) Class A; ICES 003
Safety Compliance
CISPR A; CE Mark
Warranty
Lifetime
CEMTF1029-100
Twisted Pair (RJ-45) [5 km 3.1 mi.]
to 1310nm TX / 1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CEMTF1029-101
Twisted Pair (RJ-45) [5 km 3.1 mi.]
to 1550nm TX / 1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
CEMTF1029-102
Twisted Pair (RJ-45) [5 km 3.1 mi.]
to 1310nm TX / 1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
CEMTF1029-103
Twisted Pair (RJ-45) [5 km 3.1 mi.]
to 1550nm TX / 1310nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
point system™
slide-in-module
media converter
Table of Contents
Select Media Converter
Select Switch
POTS 2-wire Copper to Fiber
POTS 2-wire Copper to Fiber Media Converter
Connect central-office voice grade
signals to distant Plain Old Telephone
equipment (POTS) utilizing standard
telephone signaling. Two units are
required to implement an end to end
system. Unit A connects to a
telephone line or PBX and has the
ability to detect ringing voltages and
to act as a telephone (LINE SIDE
FXS). Unit B is the reciprocal unit and
has the ability to act as a Central
Office and connects to a telephone
device (CUSTOMER SIDE FXO).
Loop Extender / Isolator
ethernet
fast ethernet
10/100 bridging
100/1000 bridging
10/100/1000
gigabit ethernet
atm / oc-x
ds3-t3/e3
high speed serial
rs232
rs422 / 485
t1 / e1
CAPTF33xx-1xx
Automatic Ring Down
e&m, 2/4-wire
pots 2-wire
video
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
Line Side FXS: CAPTF3311-100
Customer Side FXO: CAPTF3311-110
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Specifications
See pages 171–181 for complete fiber optic connector specs.
Features
Standards
Audio transmission
FCC Part 68, TBR21
Analog Port (Telephone Emulation or FXS)
Connector: RJ-11
Impedance: 600 ohms
REN: 0.48
Loop Current: 20 to 100 ma.
Insertion Loss: 0.0 +/-1.0 dB at 1000
Hz when both ports are terminated at
600 ohms
Caller ID
Automatic Ring Down
Dual or single fiber options
SNMP Management
Ringing at the distant end
Electrical interface is provided through an RJ-11 female
connector
Remote Firmware Upgrade (see page 16)
Note: CAPTF cards cannot be used with the 1-Slot Point
System Chassis™ (pages 20 & 21)
Analog Port (Central Office Emulation or FXO)
Impedance: 600 ohms
Battery Source: 48 VDC +/- 5V
Ringing Supply: 90Vp-p
Ring Frequency: 15 – 30 Hz.
(Reproduces frequency detected by
side A)
Ring Cadence: Reproduces cadence
detected by side A
Insertion Loss: 1.0 +/- 1.0 dB @ 1000
Hz when both ports are terminated at
600 ohms
Voice Frequency
300Hz – 3KHz
Switches/Option Jumpers Automatic Ring Down / Normal
Status LEDs
Dimensions
POTS 2-wire
Stand-Alone Media Converters
page 121
Call us at 800-526-9267 or 952-941-7600
Width: 2.9" [74 mm]
Depth: 4.8" [122 mm]
Height: 1.4" [36 mm]
Line Side FXS: CAPTF3314-100
Customer Side FXO: CAPTF3314-110
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Line Side FXS:
CAPTF3315-100 Link Budget: 7.0 dB
Customer Side FXO:
CAPTF3315-110 Link Budget: 26.0 dB
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1310nm single mode (SC)
[40 km/24.9 mi.]
Single Fiber Products
Recommended use in pairs (see page 17)
Line Side FXS: CAPTF3329-100
Customer Side FXO: CAPTF3329-110
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
Line Side FXS: CAPTF3329-101
Customer Side FXO: CAPTF3329-111
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
Line Side FXS: CAPTF3329-102
Customer Side FXO: CAPTF3329-112
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Line Side FXS: CAPTF3329-103
Customer Side FXO: CAPTF33129-113
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
Emissions Compliance
FCC Class A; VCCI Class A; EN 55022
(CISPR 22) Class A; ICES 003
Note: Single Fiber products should be
paired by application:
Safety Compliance
CISPR A; CE Mark
Warranty
Lifetime
Loop Extender/Isolator Application
Line Side FXS: CAPTF3329-100
Customer Side FXO: CAPTF3329-111
Power Consumption
See Also:
LED colors are Green
SDF (Fiber Link): On indicates fiber
link up;
ACT (In Use): On indicates unit in use;
Flashing indicates ringing;
PWR (Power): On indicates power is
on
Line Side FXS: CAPTF3313-100
Customer Side FXO: CAPTF3313-110
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
7 watts
Automatic Ring Down Application
Line Side FXS: CAPTF3329-102
Customer Side FXO: CAPTF3329-103
< 67 >
point system™
slide-in-module
media converter
Analog CCTV Video: NTSC, PAL, SECAM Copper to Fiber
Analog CCTV Video Copper to Fiber Media Converter
Transition Networks’s Point
System™ Chassis Video Media
Receiver, when paired with our
camera-mounted transmitter
J/VD-TX-01, enables the transport
of analog CCTV video over fiber
infrastructure for extended reach
video surveillance or security
installations. And with Transition’s
unique Extended Fiber Receive
Mode, the RX sensitivity can be
adjusted to accommodate even
greater fiber link distances.
Ordering Info
CVIDF2011-150: Video Receiver (single)
BNC (75 ohm)
to Multimode (ST)
[1 km / 0.6 mi.] (normal mode)
[2 km / 1.2 mi.] (extended mode)
CVIDF2011-155: Video Receiver (dual)
(2) BNC (75 ohm)
to (2) Multimode (ST)
[1 km / 0.6 mi.] (normal mode)
[2 km / 1.2 mi.] (extended mode)
CVIDF2013-150: Video Receiver (single)
BNC (75 ohm)
to Multimode (SC)
[1 km / 0.6 mi.] (normal mode)
[2 km / 1.2 mi.] (extended mode)
CVIDF2013-155: Video Receiver (dual)
(2) BNC (75 ohm)
to (2) Multimode (SC)
[1 km / 0.6 mi.] (normal mode)
[2 km / 1.2 mi.] (extended mode)
Specifications
Video Formats
NTSC, PAL, SECAM
Optical Specs
Multimode: 850nm
6.0 dB Link Budget or
11.0 dB Link Budget
Single Mode: 1310nm
10.0 dB Link Budget or
15.0 dB Link Budget
Features
AM Modulation
NTSC, PAL, SECAM compatibility
Status LEDs
PWR (Power): ON = power connected
RX1: ON=Fiber Video feed in Channel 1
RX2: ON = Fiber Video feed in
Channel 2 (dual only)
Jumpers
JP1: Normal/Extended Mode (Circuit 1)
JP5: Normal/Extended Mode (Circuit 2)
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
2 watts (single card)
3 watts (dual card)
Compatible with all video CCTV equipment
Real Time Full Color Video
Automatic Gain Control
Link Pass Through (see page 15)
Video Specification:
Input Video: .5 to 2-volt pk-pk (75 ohms)
Bandwidth: 5 Hz – 10 MHz
Differential Gain: < 5 %
Differential Phase: < 5°
Tilt: < 1%
Signal/Noise Ratio: 60dB
Extended Fiber Receive Mode
Single or Dual Video Channel configurations
See Also:
Analog CCTV Video
Stand-Alone Media Converters
page 122
< 68 >
CVIDF20xx-15x
Connect uni-directional analog video devices over fiber
The chassis card is available in
either a single video channel or
the dual video channel
configuration, allowing for density
flexibility that can be tailored to
your application. All video
conversion is performed in real time and the
Automatic Gain Control feature automatically
adjusts the video contrast and brightness to
maintain the quality and integrity of the original
video stream.
•
•
•
•
•
•
Table of Contents
Select Media Converter
Select Switch
Visit our website at www.transition.com
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
FCC Class A, EN55022 Class A,
EN55024, CE Mark
Warranty
Lifetime
CVIDF2012-150: Video Receiver (single)
BNC (75 ohm)
to Single Mode (ST)
[10 km / 6.2 mi.] (normal mode)
[20 km / 12.4 mi.] (extended mode)
CVIDF2012-155: Video Receiver (dual)
(2) BNC (75 ohm)
to (2) Single Mode (ST)
[10 km / 6.2 mi.] (normal mode)
[20 km / 12.4 mi.] (extended mode)
point system™
slide-in-module
media converter
Table of Contents
Select Media Converter
Select Switch
Analog CCTV Video + Data Receiver
ethernet
fast ethernet
10/100 bridging
100/1000 bridging
10/100/1000
gigabit ethernet
atm / oc-x
ds3-t3/e3
high speed serial
rs232
rs422 / 485
t1/e1
e&m, 2/4-wire
pots
CVIDF201x-110
V
D
Transition Networks's Point System™
Chassis Analog Video + Data Receiver,
when paired with our cameramounted transmitter SVIDF201x-100,
enables the transport of analog CCTV
video and PTZ serial data over fiber
infrastructure for extended reach
video surveillance or security
installations. And with Transition’s
unique Extended Fiber Receive
Mode, the RX sensitivity can be
adjusted to accommodate even
greater fiber link distances.
NEW
video
Connect uni-directional analog video devices over fiber
Ordering Info
Video Receiver
(monitor/controller side)
CVIDF2011-110
BNC (75 ohm) [228 m/750 ft.]
to 850nm Multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
CVIDF2013-110
BNC (75 ohm) [228 m/750 ft.]
to 850nm Multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
The RX chassis cards receive the
video signal on fiber and convert it
back to an analog composite video
stream and output the video on
coaxial cable to the monitor. In
addition, the RX card receives the
data stream from the PTZ controller
and transmits it over the fiber cable to
the other end of the link.
CVIDF2012-110
BNC (75 ohm) [228 m/750 ft.]
to 1310nm Single Mode (ST)
[20 km/12.4 mi.] Link Budget: 15.0 dB
All conversion is performed in real
time. Automatic gain control maintains the desired quality
of the video stream’s contrast and brightness for extended
distances. No field adjustments are necessary.
Specifications
Video Formats
NTSC, PAL, SECAM
Data Formats
RS-232, RS-422, RS-485
Features
Data Rate
Serial: 115 kb/s
AM Modulation
Jumpers
JP1: Enable/Disable Automatic Gain
Control
JP2: Normal/Extended Mode
JP3: Hardware/Software Mode
Supports RS-232, RS-422 or RS485 data transmission
for PTZ camera functionality
Status LEDs
PWR (Power): ON = Power connected
V (video): ON = video signal present
D (data): ON = data transmitted
Automatic Gain Control
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
3 watts
Environment
See chassis specifications
NTSC, PAL, SECAM compatibility
Real Time Full Color Video
Transparent to Data Encoding/Compatible with Major
CCTV Camera Manufacturers
Altitude
0 – 10,000 feet
Operating Humidity
5% – 95% non-condensing
• Input Video: 0.5 to 2-volt pk-pk (75 ohms)
Shipping Weight
1 lb. [0.45 kg]
• Receiver: 9 – 16 VAC/DC
Compliance
CISPR/EN55022 Class A + EN55024;
EN60950 Class A; FCC Class A;
CE Mark
Warranty
Lifetime
Video Specification:
• Differential Gain: < 5 %
• Differential Phase: < 5°
• Tilt: < 1%
• Signal/Noise Ratio: 60dB
See Also:
Analog CCTV Video + Data
Stand-Alone Media Converters
page 123
Call us at 800-526-9267 or 952-941-7600
< 69 >
Table of Contents
Select Media Converter
Select Switch
Mounting Options
stand-alone
media converter
E-MCR-04(x)
12-slot Media Converter Rack
Features
Cost
Flexible Design for
Small, Growing Networks
Simplify your media
converter installation with
Transition Networks’s
Media Converter Rack. This
rack-mountable unit
supports up to 12
Transition Networks’s
stand-alone media
converters. The unique
enclosure design makes
multiple connections and
consolidates them into a
single device; making
network connections easier
and more efficient.
Easily rackmount Transition
Networks media converters
that you already own, or
buy stand-alone today and
rack mount in the future.
Convenience
Allows you to mount one or
more stand-alone units in a
convenient enclosure with a
single power supply.
Flexibility
Remove one or more
converters as needed and
use them as stand-alone
media converters.
Space Saving Design
The device is powered by a
single internal universal
power supply; eliminating
the need for multiple power
connections. The unit saves
space in the wiring closet
and reduces the number of
power cords required. The
stand-alone media
converters can also be
removed and powered
externally in different
situations as your network
needs change.
Reduce Network
Downtime
Once installed, the media
converter units are hotswappable to avoid network
downtime.
Specifications
Ordering Info
Dimensions
Width: 17.0" [432 mm]
Depth: 15.0" [381 mm]
Height: 5.0" [127 mm]
Power Supply
Universal, internal power supply;
AC85 – 264V, 47 – 63 Hz.
Environment
0 – 50°C, 10% – 90% humidity
(non-condensing), 0 – 10,000 feet
Shipping Weight
12 lbs. [5.2 kg]
Regulatory Compliance
UL Listed; C-UL Listed (Canada);
CISPR/EN55022 Class A; FCC Class A;
CE Mark
Warranty
Lifetime
E-MCR-04
12-slot Media Converter Rack
E-MCR-04(T)
12-slot Media Converter Rack (Tall)
(for use with the CPSMC0100-200
Single-Slot chassis)
Wall Mount Brackets
Wall Mount Brackets are small simple “L-shaped” tabs that
allow a single Transition Networks media converter to be
mounted anywhere needed. The brackets are sold in pairs
and are available in several sizes and types to match the
different sized media converters and space requirements.
WMBL; WMBP; WMBS
WMBV; WMBD
Specifications
Shipping Weight
1 lb. [0.45 kg]
Warranty
Lifetime
Ordering Info
WMBD
5.0" [127 mm] DIN Rail Mount Bracket
Fits all Stand-Alone Converters; Single or Dual
Slot Point System™ Chassis
WMBD-E
4.3" [109 mm] DIN Rail Mount Bracket
(Extended)
Fits all Stand-Alone Converters with piggyback
power supply attached
WMBD-F
3.3" [84 mm] DIN Rail Mount Bracket (flat)
Fits all Stand-Alone Converters
3.25" [82 mm] wide
WMBD-FS
3.1" [79 mm] DIN Rail Mount Bracket
(flat, small)
Fits Stand-Alone Converters 3.0" [76 mm] wide
WMBJ-V
2.75” [70 mm] Wall mount bracket kit for
Analog Video products including:
J/VD-TX-01xx
J/VD-MRX-01xx
SVIDF201x-100
< 70 >
Visit our website at www.transition.com
WMBL
4.0" [102 mm]
Fits Stand-Alone Converters size 4.7" [119 mm]
WMBP
5.0" [127 mm]
Fits Single or Dual Slot Point System™ Chassis
WMBS
3.2" [81 mm]
Fits Stand-Alone Converters size 3.9" [99 mm]
WMBV
5.0" [127 mm]
Vertical Mount
Fits all Stand-Alone Converters;
Single or Dual Slot Point System™ Chassis
WMBV-E
4.7" [119 mm]
Extended Vertical Mount Fits all Stand-Alone
Converters with piggyback power supply
attached
stand-alone
media converter
Table of Contents
Select Media Converter
Select Switch
Mounting Options
RMS19-SA4-01
4-slot Media Converter Shelf
NEW
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
Rack mount up to 4 stand-alone media converters in one
convenient un-powered shelf.
Features
Space Saving Save rack space in low density
deployments: 19-inch rack mount, 1RU high.
Flexible Mix and match up to 4 Transition Networks
stand-alone media converters (excluding double-high
models).
Specifications
Dimensions
Width: 17.0" [432 mm]
Depth: 6.0" [152 mm]
Height: 1.75" [44 mm]
Shipping Weight
3 lbs. [1.35 kg]
Warranty
Lifetime
Ordering Info
RMS19-SA4-01
4-slot Media Converter Shelf
Non-power design Don’t pay for power supplies twice.
This low cost design allows the use of the power supplies
that ship with the media converter.
Power Cord Tie-Downs Eliminates the accidental
disconnection of power supplies from the media
converters.
Converter Mounting Brackets Securely mounts the
converters to the shelf.
Call us at 800-526-9267 or 952-941-7600
< 71 >
stand-alone
media converter
Table of Contents
Select Media Converter
Select Switch
Wide Input External Power Supplies
SPS-1872-xx
Piggy-Back Power Supply
Attached to Converter
Piggy-Back Power Supply
and Converter
Transition Networks’s wide input external power
supplies allow you to provide a wide range of
input voltages to power your stand-alone
converters and chassis. Input voltages of 18 –
60VDC and 24 – 30VMRS allow for installation
of any of Transition’s stand-alone media
converters in most industrial, telecom and
commercial applications, as well as HVAC and
building control environments.
Multiple form factors allow flexibility to meet
your application. The stand-alone form factor
can be used with all Transition stand-alone
media converters as well as the single-slot and
dual-slot Point System™ Chassis. The piggy
back form factor allows the power supply to
attach directly to the converter and eliminate the
power cable commonly found between the
power supply and the converter. Once the piggy
back supply is attached to the converter, the
combined assembly is much easier to wall
mount or attach to DIN-rail environments than
using a separate supply.
Stand-Alone Power Supply
Specifications
Input Voltage
18 – 60VDC; 24 – 30VMRS
Isolation Voltage
(Dielectric withstand) Meets IEC 950 for
one minute
1500 VAC: Output/Input
1500 VAC: Input/Safety GND
1500 VAC: Output/CASE
Output Voltage
12.6 VDC
Output Current
1.0A
Load Regulation
±5% at 10% load to full rated load
Over Load Protection (OLP)
When the average power rating
exceeds 125% – 150% of
maximum power, output voltages
reduced to a safe dissipation
level; protects against short
circuit of any output.
No Load Protection No damage to power supply when
operating at no load
Transient Protection No voltage spike at power-on, power-off,
or power failure
Power Distribution
+12.6VDC at 1.0A maximum
Power Consumption 6 watts max. @ 18VDC input, 12.6VDC
output
Efficiency
70% (typical)
Noise and Ripple
±40mV peak-to-peak of output voltage
(typical)
MTBF
Greater than 60,000 hours with typical
load operating at 20°C temperature
(calculated according to MIL-HDBK-217E)
Regulatory Compliance
Dimensions
UL Listed EN60950; CISPR/EN55022
Class A; FCC Class A; CE Mark;
EN55024
SPS-1872-SA:
Width: 3.9" [99 mm]
Depth: 3.1" [79 mm]
Height: 1.0" [25 mm]
SPS-1872-CC:
Width: 4.6" [117 mm]
Depth: 3.1" [79 mm]
Height: 1.0" [25 mm]
SPS-1872-PS:
Width: 4.6" [117 mm]
Depth: 3.4" [86 mm]
Height: 1.0" [25 mm]
SPS-1872-DPS:
Width: 4.6" [117 mm]
Depth: 3.4" [86 mm]
Height: 1.8" [46 mm]
< 72 >
Visit our website at www.transition.com
Shipping Weight
1 lb. [0.45 kg]
Environment
Operating: 0 – 50°C
Storage: -20 – +85°C
Humidity: 5 – 95% non-condensing
Altitude: 0 – 10,000 ft.
Warranty
Lifetime
Ordering Info
SPS-1872-CC
Piggy-Back
For use with: Non-Point System™
stand-alone media converters
3.0" wide (E-TBT-FRL-05;
E-100BTX-FX-05; etc.)
SPS-1872-DPS
Piggy-Back
For use with: Double High Point
System™ stand-alone media
converters (SBFTF10xx-140 and
SBFTF10xx-120)
SPS-1872-PS
Piggy-Back
For use with: Point System™ standalone media converters 3.25" wide
(SBFTF1011-100; SGETF1013-100,
etc.)
SPS-1872-SA
Stand-Alone
For use with: All stand-alone media
converters; Single-Slot Point System™
Chassis; Dual-Slot Point System™
Chassis
stand-alone
media converter
Table of Contents
Select Media Converter
Select Switch
Just Convert-IT™
The Just Convert-IT™ line of media converters
is a low-cost, no-frills model, which offers the
same quality and reliability as our full-featured
product line.
Transition Networks's Just Convert-IT™ Line
has several offerings:
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
When to use Just Convert-IT™
media converters:
Network management is NOT an
issue
Cost is a critical factor
Mid to low density applications
Minimal features are required
Ethernet: Convert 10BASE-T to 10BASE-FL
Simply upgrade twisted pair networks to fiber and end the
problems of difficult installations associated with traditional
converters. Use Transitions 10BASE-T to 10BASE-FL model
to connect legacy networking equipment, such as a printer
that does not support a fiber optic connection, to an
Ethernet fiber optic backbone.
Ethernet: Convert 10BASE-T to 10BASE2
Convert a coaxial segment into a twisted pair
segment. Provides one BNC 10BASE2 compliant port
and one RJ-45 twisted pair connector.
Ordering Info
Ethernet (pages 76 & 77)
Gigabit Ethernet (continued)
J/E-CF-02
10BASE-T to 10BASE-FL MM (ST)
[2 km/ 1.2 miles]
J/GE-CF-01(LX2)
1000BASE-T to 1000BASE-LX SM (SC)
[25 km/15.5 miles]
J/E-CF-02(SC)
10BASE-T to 10BASE-FL MM (SC)
[2 km/ 1.2 miles]
J/GE-CF-01(LX6)
1000BASE-T to 1000BASE-LX SM (SC)
[65 km/40.4 miles]
J/E-CF-02(SM)
10BASE-T to 10BASE-FL SM (ST)
[20 km/12.4 miles]
J/GE-CF-01(LX101)
1000BASE-T to 1000BASE-LX 1550nm
TX / 1310nm RX single fiber single
mode (SC) [20 km/12.4 miles]
J/E-CX-TBT-02
10BASE-T to 10BASE2 (BNC)
[185 m / 607 ft.]
Fast Ethernet (page 83)
Fast Ethernet: Convert 100BASE-TX to 100BASE-FX
Connect copper to fiber in a Fast Ethernet environment.
Available for single mode and multimode fiber.
10/100 Bridging: Convert 10/100BASE-TX to 10/100BASE-FX
Connect a half-duplex device, such as a hub, to fiber.
Available for single mode and multimode fiber.
Gigabit: Convert 1000BASE-T to 1000BASE-SX/LX
Connect copper to fiber in a Gigabit Ethernet
environment. Available for single mode and multimode
fiber.
J/FE-CF-03
100BASE-TX to 100BASE-FX MM (ST)
[2 km/ 1.2 miles]
J/FE-CF-03(SC)
100BASE-TX to 100BASE-FX MM (SC)
[2 km/ 1.2 miles]
J/FE-CF-03(SM)
100BASE-TX to 100BASE-FX SM (SC)
[20 km/12.4 miles]
J/FE-CF-03(LH)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
J/FE-CF-03(100)
100BASE-TX to 100BASE-FX 1310nm
TX / 1550nm RX single fiber single
mode (SC) [20 km/12.4 miles]
J/FE-CF-03(101)
100BASE-TX to 100BASE-FX 1550nm
TX / 1310nm RX single fiber single
mode (SC) [20 km/12.4 miles]
10/100 Bridging (page 96)
RS232: Convert Copper to Fiber
Extend the distance between serial connections with
the use of fiber optic cable.
J/E-PSW-FX-02
10/100BASE-TX to 100BASE-FX MM
(ST) [2 km/ 1.2 miles]
J/E-PSW-FX-02(SC)
10/100BASE-TX to 100BASE-FX MM
(SC) [2 km/ 1.2 miles]
J/E-PSW-FX-02(SM)
10/100BASE-TX to 100BASE-FX SM
(SC) [20 km/12.4 miles]
Analog CCTV Video: NTSC, PAL, SECAM
Connect uni-directional analog video devices over fiber,
J/E-PSW-FX-02(100)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
J/E-PSW-FX-02(101)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
Power over Ethernet: Convert Copper to Fiber
Power over Cat5 to remotely located devices.
Gigabit Ethernet (page 105)
J/GE-CF-01(SX)
1000BASE-T to 1000BASE-SX MM
(SC) [62.5/125µm: 220 m / 722 ft.]
[50/125µm: 550 m / 1804 ft.]
J/GE-CF-01(LX1)
1000BASE-T to 1000BASE-LX SM (SC)
[10 km/6.2 miles]
Call us at 800-526-9267 or 952-941-7600
RS232 (page 115)
J/RS232-CF-01
(DB-9) (female) [15 m/49 ft.]
to MM (ST) [2 km/1.2 miles]
J/RS232-CF-01(SC)
(DB-9) (female) [15 m/49 ft.]
to MM (SC) [2 km/1.2 miles]
J/RS232-TF-01
(DB-9) (male) [15 m/49 ft.]
to MM (ST) [2 km/1.2 miles]
J/RS232-TF-01(SC)
(DB-9) (male) [15 m/49 ft.]
to MM (SC) [2 km/1.2 miles]
Power over Ethernet (page 98)
J/POE-CF-01
10/100BASE-TX to 100BASE-FX MM
(ST) [2 km/1.2 miles]
J/POE-CF-01(SC)
10/100BASE-TX to 100BASE-FX MM
(SC) [2 km/1.2 miles]
J/POE-CF-01(SM)
10/100BASE-TX to 100BASE-FX SM
(SC) [20 km/12.4 miles]
Analog Video (page 122)
J/VD-TX-01: Video Transmitter
BNC (75 ohm)
to Multimode (ST) [1 km/ 0.6 miles]
J/VD-RX-01: Video Receiver
BNC (75 ohm)
to Multimode (ST) [1 km/ 0.6 miles]
J/VD-MRX-01: Miniature Video Receiver
BNC (75 ohm)
to Multimode (ST) [1 km/ 0.6 miles]
J/VD-TX-01(SC): Video Transmitter
BNC (75 ohm)
to Multimode (SC) [1 km/ 0.6 miles]
J/VD-RX-01(SC): Video Receiver
BNC (75 ohm)
to Multimode (SC) [1 km/ 0.6 miles]
J/VD-MRX-01(SC): Miniature Video Receiver
BNC (75 ohm)
to Multimode (SC) [1 km/ 0.6 miles]
J/VD-TX-01(SM): Video Transmitter
BNC (75 ohm)
to Single Mode (ST) [10 km/ 6.2 miles]
J/VD-RX-01(SM): Video Receiver
BNC (75 ohm)
to Single Mode (ST) [10 km/ 6.2 miles]
J/VD-MRX-01(SM): Miniature Video Receiver
BNC (75 ohm)
to Single Mode (ST) [10 km/ 6.2 miles]
< 73 >
stand-alone
media converter
Table of Contents
Select Media Converter
Select Switch
Ethernet 10BASE-T to 10BASE-FL
E-TBT-FRL-05(xx)
Ethernet Copper to Fiber Media Converter
Integrate mixed cabling environments using either switched or
shared Ethernet.
Extend Network Distance
Extend Network Distance & Connect Unlike Devices
Two 10BASE-T to 10BASE-FL
Media Converters used back-toback extend the distance between
two 10BASE-T devices up to 5 km
(3.1 mi.) using multimode fiber or
up to 40 km (24.9 mi.) using
single mode fiber without a
repeater.
Ordering Info
See pages 171-181 for complete fiber
optic connector specs.
E-TBT-FRL-05
10BASE-T (RJ-45) [100 m/328 ft.]
10BASE-FL 850nm multimode (ST)
[2 km/ 1.2 mi.] Link Budget: 13.5 dB
E-TBT-FRL-05(SC)
10BASE-T (RJ-45) [100 m/328 ft.]
10BASE-FL 850nm multimode (SC)
[2 km/ 1.2 mi.] Link Budget: 13.5 dB
Connect Unlike Devices
Connect your workgroup to a
distant server or a central switch;
or extend distances between like
and unlike devices in either full or
half-duplex modes.
E-TBT-FRL-05(MT)
10BASE-T (RJ-45) [100 m/328 ft.]
10BASE-FL 850nm MM (MT-RJ)
[2 km/ 1.2 mi.] Link Budget: 13.5 dB
E-TBT-FRL-05(L)
10BASE-T (RJ-45) [100 m/328 ft.]
10BASE-FL 1300nm MM (ST)
[5 km/ 3.1 mi.] Link Budget: 13.5 dB
Specifications
E-TBT-FRL-05(SM)
10BASE-T (RJ-45) [100 m/328 ft.]
10BASE-FL 1310nm SM (ST)
[20 km/12.4 mi.] Link Budget: 7.0 dB
Features
See pages 171–181 for complete fiber optic connector specs.
AutoCross™ (see page 14)
Standards
IEEE Std. 802.3™ 10BASE-T,
10BASE-FL
Link Pass Through (see page 15)
Switch
S1: Enables/disables Link Pass
Through
Automatic Link Restoration (see page 16)
Status LEDs
PWR (Power): ON = connection to
external AC power
Link: ON = unit is receiving link
pulses from a compliant device
RX (Receive): ON = packets are being
received
E-TBT-FRL-05(LH)
10BASE-T (RJ-45) [100 m/328 ft.]
10BASE-FL 1310nm single mode (ST)
[40 k/24.9 mi.] Link Budget: 10.0 dB
Dimensions
Width: 3.0" [76 mm]
Depth: 3.9" [99 mm]
Height: 1.0" [25 mm]
Power
External AC/DC required; 12VDC,
0.5A, unregulated, standard
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-CC (see page 72)
Piggy Back Power Supply
Environment
0 – 50°C; 5% – 95% humidity noncondensing; 0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed, C-UL Listed (Canada)
Regulatory Compliance
FCC Class A, CISPR22/EN55022
Class A, EN55024, EN61000,
CE Mark
Warranty
See Also:
Ethernet 10BASE-T to 10BASE-FL Point
System™ Slide-In-Module Media
Converters
page 33
< 74 >
Visit our website at www.transition.com
Lifetime
E-TBT-FRL-05(XC)
10BASE-T (RJ-45) [100 m/328 ft.]
10BASE-FL 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 7.0 dB
Optional Accessories
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-FS (see page 70)
DIN Rail Bracket (flat, small) 3.1" [79 mm]
WMBS (see page 70)
Wall Mount Bracket 3.2" [81 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
stand-alone
media converter
Ethernet 10BASE-T to 10BASE-FL Extended Temperature
mounting options
E-TBT-FRL-05(xxHT)
Ethernet Copper to Fiber Media Converter
ethernet
Extended Temperature Capable: Designed to operate in environments
where ambient temperatures can rise as high as 70°C (158°F).
Table of Contents
Select Media Converter
Select Switch
Connect remote devices such as
IP based surveillance cameras or
signaling equipment in a nonclimate controlled enclosure.
Deliver 10Mbps data access in
residential or commercial
environments inside a nonclimate controlled pedestal
enclosure.
Extended Temperature Applications (to 70°C)
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
E-TBT-FRL-05(HT)
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 850nm multimode (ST)
[2 km/ 1.2 mi.] Link Budget: 13.5 dB
E-TBT-FRL-05(SCHT)
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 850nm multimode (SC)
[2 km/ 1.2 mi.] Link Budget: 13.5 dB
This converter can also be
deployed in industrial
environments where excessive
heat may be a concern. (Note that
this device is rated to meet
“temperature” requirements of
industrial environments only.)
E-TBT-FRL-05(SMHT)
10BASE-T (RJ-45) [100 m/328 ft.]
10BASE-FL 1310nm single mode (ST)
[20 km/12.4 mi.] Link Budget: 23.0 dB
E-TBT-FRL-05(XCHT)
10BASE-T (RJ-45) [100 m/328 ft.]
10BASE-FL 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
E-TBT-FRL-05(XLHT)
10BASE-T (RJ-45) [100 m/328 ft.]
10BASE-FL 1310nm single mode (SC)
[50 km/31.1 mi.] Link Budget: 33.0 dB
Features
Specifications
AutoCross™ (see page 14)
See pages 171–181 for complete fiber optic connector specs.
Link Pass Through (see page 15)
Automatic Link Restoration (see page 16)
Call us at 800-526-9267 or 952-941-7600
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
Optional Accessories
Standards
IEEE Std. 802.3™ 10BASE-T;
10BASE-FL
Switch
S1: Enables/disables Link Pass
Through
Status LEDs
Power: On for normal operation;
Link: Steady LED indicates unit is
receiving link pulses from a compliant
device;
Receive: Flashing or lit LED indicates
packets are being received
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Dimensions
Width: 3.0" [76 mm]
Depth: 3.9" [99 mm]
Height: 1.0" [25 mm]
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
Power
External AC/DC required; 9V DC. 1.0A;
unregulated; standard
Environment
-25° C to +70° C; 5% – 95% humidity
non-condensing;
0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance
CISPR22/EN55022 Class A;
FCC Class; CE Mark
Warranty
Lifetime
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-CC (see page 72)
Piggy Back Power Supply
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-FS (see page 70)
DIN Rail Bracket (flat, small) 3.1" [79 mm]
WMBS (see page 70)
Wall Mount Bracket 3.2" [81 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
< 75 >
stand-alone
media converter
Ethernet Just Convert-IT™ 10BASE-T to 10BASE2
J/E-CX-TBT-02
Twisted Pair to Coax Media Converter
Table of Contents
Select Media Converter
Select Switch
Connect legacy coax devices to a 10BASE-T network.
Connect Legacy Equipment
Features
Protects your equipment
Ordering Info
investment by allowing you to
upgrade—not replace—your
current network.
J/E-CX-TBT-02
10BASE-T (RJ-45)
[100 m/328 ft.]
to 10BASE2 (BNC)
[185 m / 607 ft.]
Provides one RJ-45 twisted
pair connector and one BNC
10BASE2 compliant port.
Supports up to 24 devices
daisy-chained on one coax
segment per twisted pair
segment.
MDI/MDI-X selection switch
allows converter to be connected
to either a workstation/NIC or
hub, switches and routers without
changing the cable type.
BNC T-connector included
for daisy chain applications.
Specifications
Note: not rack-mountable
Standards
IEEE Std. 802.3™ 10BASE-T,
10BASE2
Switches
MDI/MDI-X: Selects correct RJ-45
port setting
Status LEDs
PWR (Power): ON = Connected to
external power
BNC/ACT (BNC Activity):
Flashing = 10BASE2 data traffic
TP/ACT (TP Activity):
ON = 10BASE-T link connection;
Flashing = 10BASE-T data traffic
COL (Collision):
Flashing = Collision present
Dimensions
Width: 2.75" [71 mm]
Depth: 3.7" [94 mm]
Height: 1.0" [25 mm]
Power
External AC/DC: 5V DC, 1.0 A
Environment
0 – 50°C, 5% – 90% humidity noncondensing, 0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance
CISPR22/EN55022 Class A,
FCC Class A, CE Mark
Warranty
Lifetime
< 76 >
Visit our website at www.transition.com
Ethernet Just Convert-IT™ 10BASE-T to 10BASE-FL
stand-alone
media converter
Connect Legacy Equipment:
Connect an existing 10BASE-T segment or device to an Ethernet fiber
optic backbone.
The “Just Convert-It™” 10BASE-T
to 10BASE-FL Media Converter is
an inexpensive, no frills way to
extend the distance between
Ethernet connections with the use
of fiber optic cable, while
maintaining the same quality and
reliability found on Transition's
full-featured line of products.
ethernet
Table of Contents
Select Media Converter
Select Switch
Connect Legacy Equipment
See pages 171–181 for complete fiber
optic connector specs.
J/E-CF-02
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 850nm MM (ST)
[2 km/ 1.2 mi.] Link Budget: 13.5 dB
J/E-CF-02(SC)
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 850nm MM (SC)
[2 km/ 1.2 mi.] Link Budget: 16.5 dB
Features
J/E-CF-02(SM)
10BASE-T (RJ-45) [100 m/328 ft.]
10BASE-FL 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 7.0 dB
allow for
quick status information
way to extend
distance
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-CC (see page 72)
Piggy Back Power Supply
Automatic Link Restoration
(see page 16)
Can be rack-mounted in the
E-MCR-04
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Specifications
See pages 171–181 for complete fiber optic connector specs.
Call us at 800-526-9267 or 952-941-7600
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
Ordering Info
Unit and Port LEDs
Cost-effective
mounting options
J/E-CF-02(xx)
Ethernet Copper to Fiber Media Converter
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
Standards
IEEE Std. 802.3™ 10BASE-T;
10BASE-FL
Status LEDs
Power: On for normal operation;
Copper: Steady = Link;
Flashing = Rx Data
Fiber: Steady = Link;
Flashing = Rx Data
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
Dimensions
Width: 3.0" [76 mm]
Depth: 3.9" [99 mm]
Height: 1.0" [25 mm]
WMBD-FS (see page 70)
DIN Rail Bracket (flat, small) 3.1" [79 mm]
Power
External AC/DC; 12VDC, 0.5 A min
Power Consumption
2.8 watts
Environment
0 – 50° C; 5% – 95% humidity noncondensing; 0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL listed and CSA certified
Regulatory Compliance
CISPR22/EN55022; EN55024;
EN60950 Class A; FCC Class A;
CE Mark
Warranty
Lifetime
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBS (see page 70)
Wall Mount Bracket 3.2" [81 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
< 77 >
Power over Ethernet 10BASE-T to 10BASE-FL
stand-alone
media converter
SEPOE101x-150
Power over Ethernet Copper to Fiber PSE
Media Converter
Enables enterprises to power
network devices directly over the
existing CAT5 data connection.
The Power over Ethernet (POE)
converter emulates IEEE
802.3af™ Power Sourcing
Equipment (PSE), and is
compatible with Powered Devices
(PD) that comply with the IEEE
802.3af™ standard. The Power
over Ethernet (POE) converter will
detect the presence of a device
that needs power and inject the
applicable current into the data
cable.
Power over Cat5 to Remotely Located Devices
Attractive solution for delivering power over CAT5 to
powered devices such as access points, Voice over
IP (VoIP) products, access servers, outdoor routers,
and internet kiosks.
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
SEPOE1011-150
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 850nm multimode (ST)
[2 km/ 1.2 mi.] Link Budget: 13.5 dB
SEPOE1013-150
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 850nm multimode (SC)
[2 km/ 1.2 mi.] Link Budget: 13.5 dB
Optional Accessories
(sold separately)
Mounting Options:
WMBL (see page 70)
Wall Mount Bracket 4.0” [102 mm]
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™
Allows for use of fiber switches with POE solution
on remote end.
Switches
Switch 1: MDI Power:
UP = Enable; DOWN = Disable
Switch 2: MDI Link Pass Through:
UP = Enable; DOWN = Disable
Features
Status LEDs
Power: Lit for normal operation
MDI Fault: ON = over-current detected
MDI ON: ON = MDI port supplying
power
TP Link: ON = Link on copper port
Fiber Link: ON = Link on fiber port
TP ACT: Flashing = data activity on
copper link
Fiber Act: Flashing = data activity on
fiber link
Dimensions
Width: 7.3" [185 mm]
Depth: 4.4" [112 mm]
Height: 1.2" [30 mm]
Power Consumption
45 watts max.
Power Output
16.8 watts max.
Power
48 VDC +/- 5% @ 1 A maximum
Operating Temperature
0 – 50° C [32° – 122°F]
48VDC input power supply
-48VDC output per port
12W max load
Overload protection
PD Auto-sensing
Enable/Disable power MDI
Auto-Negotiation
(see page 14)
Link Pass Through (see page 15)
Automatic Link Restoration
< 78 >
Table of Contents
Select Media Converter
Select Switch
(see page 16)
Visit our website at www.transition.com
Storage Temperature
-25° – 85° C [-13° – 185°F]
Environment
5 – 95% humidity non-condensing;
altitude 0 – 10,000 ft.
Shipping Weight
2 lbs. [0.90 kg]
Regulatory Compliance
UL Listed; CISPR22/EN55022 Class A;
EN 55024 Class A; CE Mark
Warranty
Lifetime
WMBD-P
DIN Rail Mount Bracket POE
stand-alone
media converter
Ethernet/Token Ring/Continuous Duty Cycle Single Mode to Multimode
Single Mode to Multimode Media Converter
mounting options
F-SM-MM-05
ethernet
Protocol Transparency:
500Kbps – 30Mbps speed range in continuous duty cycle
Table of Contents
Select Media Converter
Select Switch
Extend Network Distance
Extend Network Distance
Ethernet or Token Ring Networks:
Connect distant networks or
devices up to 20 km in an
existing single mode network.
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
F-SM-MM-05
850nm multimode (ST)
[2 km/ 1.2 mi.] Link Budget: 13.5 dB
to 1310nm single mode (ST)
[20 km/12.4 mi.] Link Budget: 7.0 dB
Save money by purchasing
Ethernet devices with lower cost
multimode fiber interfaces and
use converters to introduce single
mode fiber only where you
need it.
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-CC (see page 72)
Piggy Back Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
Specifications
See pages 171–181 for complete fiber optic connector specs.
Call us at 800-526-9267 or 952-941-7600
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
Standards
IEEE Std. 802.5j
WMBD-FS (see page 70)
DIN Rail Bracket (flat, small) 3.1" [79 mm]
Status LEDs
Power: Lit for normal operation
Link: (Left) Lit for MM link
Link: (Right) Lit for SM link
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
Dimensions
Width: 3.0" [76 mm]
Depth: 4.7" [119 mm]
Height: 1.0" [25 mm]
Power
External AC/DC required; 12V DC.
0.5A; unregulated; standard
Power Consumption
3.1 watts
Environment
Operating temperature 0° – 50° C;
5% – 90% humidity non-condensing;
0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance
CISPR/EN55022 Class A; EN55024;
EN61000; FCC Class A; CE Mark
Warranty
Lifetime
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
< 79 >
stand-alone
media converter
Ethernet or Fast Ethernet 10BASE-T to 10BASE-FL or 100BASE-TX to 100BASE-FX
SSEFE10xx-10x
Speed Selectable Media Converter
Table of Contents
Select Media Converter
Select Switch
Selectable speed setting:
The converter can be set to 10Mbps or 100Mbps. Both copper and
fiber ports are automatically set to the same speed.
Transition Networks's speed
selectable copper to fiber Media
Converter allows you to extend
the distance between copper
based connections with the use of
fiber optic cable. The ability to
select the speed of converter
allows for easy migration from a
10Mbps network today to a
100Mbps network in the future.
This converter is a true layer 1
device as both the copper and
fiber ports operate at the same
speed setting (i.e. 100BASE-TX to
100BASE-FX). For 10Mbps
applications, these devices must
be used in pairs.
Extend Network Distance
Ethernet
Use the 10BASE-T to 10BASE-FL
speed setting (back-to-back) to extend
the distance between two 10BASE-T
devices up to 40 km (24.9 mi.) using
single mode fiber without a repeater.
SSEFE1022-100
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE or 100BASE 1310nm SM (ST)
[40 km/24.9 mi.] Link Budget: 26.0 dB
Features
Specifications
See pages 171–181 for complete fiber optic connector specs.
Link Pass Through (see page 15)
Standards
IEEE Std. 802.3™
Switches
Switch 1: Link Pass Through on/off
Switch 2: 10Mb or 100Mb operation
Status LEDs
PWR (Power): Lit for normal
operation
F-ACT (Fiber Activity): Blinking = data
reception on the fiber link
F-100 (Fiber Speed): ON = link at
100Mb
F-10 (Fiber Speed): ON = link at
10Mb
C-ACT (Copper Activity): Blinking =
data reception on the copper link
C-100 (Copper Speed): ON = link at
100Mb
C-10 (Copper Speed): ON = link at
10Mb
Ethernet or Fast Ethernet Speed Selectable
Point System™ Slide-In-Module Media
Converters
page 34
3.6 watts
Power
External AC/DC required; 12VDC,
0.5A; unregulated; standard
(provided)
Environment
0 – 50°C operating;
5% – 95% humidity non-condensing;
0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed; C-UL Listed (Canada)
Regulatory Compliance
CISPR/EN55022 Class A; EN55024;
EN60950 Class A; FCC Class A;
CE Mark
Warranty
< 80 >
Visit our website at www.transition.com
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Power Consumption
See Also:
SSEFE1012-100
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE-FL or 100BASE-FX 1310nm
SM (ST)
[20 km/12.4 mi.] Link Budget: 17.0 dB
SSEFE1015-100
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE or 100BASE 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
AutoCross™ (see page 14)
Dimensions
See pages 171-181 for complete fiber
optic connector specs.
SSEFE1014-100
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE or 100BASE 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
Fast Ethernet
Use the 100BASE-TX to 100BASE-FX
setting to extend the distance between
any two 100BASE-TX devices up to 40
km (24.9 mi.) using single mode fiber.
Or interface directly with a 100BASEFX compliant port on any device to
provide a 100BASE-TX port interface.
Automatic Link Restoration (see page 16)
Ordering Info
Lifetime
Single Fiber Products
Recommended use in pairs (see page 17)
SSEFE1029-100
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE-FL or 100BASE-FX 1310nm
TX / 1550nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SSEFE1029-101
10BASE-T or 100BASE-TX (RJ-45)
[100 m/328 ft.]
to 10BASE-FL or 100BASE-FX 1550nm
TX / 1310nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS (see page 72)
Piggy Back Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-E (see page 70)
DIN Rail Bracket (Extended) 4.3" [109 mm]
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
WMBV-E (see page 70)
Extended Vertical Mount 4.7" [119 mm]
stand-alone
media converter
Table of Contents
Select Media Converter
Select Switch
Fast Ethernet 100BASE-TX to 100BASE-FX
Fast Ethernet Media Converter
Extend Network Distance
Used in pairs, this media converter
can extend distances between two
twisted pair switches or a switch and
a server up to 2 km over multimode
fiber or up to 120 km over single
mode fiber.
mounting options
E-100BTX-FX-05(xxxx)
Connect Remote Devices
Using one media converter, a switch
with a copper port can be connected
to a switch with an existing fiber
interface.
ethernet
fast ethernet
single fiber model
Extend Network Distance
Features
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
Operates under heavy traffic loads without excess heat, so there is no need
for a failure-prone internal fan.
Round trip delay of only 40 bit times —far below the Class II rating of 92 bit
times
Auto-Negotiation (see page 14)
AutoCross™ (see page 14)
Link Pass Through (see page 15)
Far End Fault (FEF) (see page 14)
Automatic Link Restoration (see page 16)
Pause (see page 15)
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
The converters will automatically re-establish link when connected to two
10/100 auto-negotiating switches if link is lost. With other manufacturers’
converters the user must intervene to re-establish link.
E-100BTX-FX-05
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm MM (ST)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
E-100BTX-FX-05(SC)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
Specifications
See pages 171–181 for complete fiber optic connector specs.
E-100BTX-FX-05(LC)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (LC)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
Standards
IEEE Std. 802.3™ 100BASE-FX,
100BASE-TX
Switches
SW1: Auto-Negotiation On/Off
SW2: Pause TX On/Off
SW3: Link Pass Through On/Off
SW4: Far End Fault On/Off
E-100BTX-FX-05(MT)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm MM (MT-RJ)
[2 km/ 1.2 mi.] Link Budget: 14.5 dB
Jumpers
Jumper Block 1: AutoCross™ enable
Status LEDs
Power
SDF or LKF (Link Fiber)
SDC or LKC (Link Copper)
RXF (Receive Fiber)
RXC (Receive Copper)
E-100BTX-FX-05(SM)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Dimensions
Width: 3.0" [76 mm]
Depth: 4.7" [119 mm]
Height: 1.0" [25 mm]
Power
External AC/DC required: 12 VDC,
0.5 A, unregulated, standard
Environment
0 – 50°C, 5% – 95% humidity non-condensing, 0 – 10,000
feet altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance
FCC Class A, EN55024, EN55022 Class A, EN61000, CE Mark
Warranty
Lifetime
E-100BTX-FX-05(SMLC)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (LC)
[20 km/12.4 mi.] Link Budget: 17.3 dB
E-100BTX-FX-05(LH)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
E-100BTX-FX-05(XL)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
E-100BTX-FX-05(LW)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
E-100BTX-FX-05(XLW)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm SM (SC)
[120 km/74.6 mi.] Link Budget: 36.0 dB
See Also:
Fast Ethernet 100BASE-TX to 100BASE-FX Point
System™ Slide-In-Module Media Converters
page 35 & 36
Visit our website at www.transition.com
Single Fiber Products
Recommended use in pairs (see page 17)
E-100BTX-FX-05(100)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
E-100BTX-FX-05(101)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
E-100BTX-FX-05(102)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[40 km/ 24.9 mi.] Link Budget: 25.0 dB
E-100BTX-FX-05(103)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[40 km/ 24.9 mi.] Link Budget: 25.0 dB
E-100BTX-FX-05(104)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[60 km/37.3 mi.] Link Budget: 16.0 dB
E-100BTX-FX-05(105)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[60 km/37.3 mi.] Link Budget: 26.0 dB
E-100BTX-FX-05(106)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[80 km/49.7 mi.] Link Budget: 33.0 dB
E-100BTX-FX-05(107)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[80 km/49.7 mi.] Link Budget: 32.0 dB
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-CC (see page 72)
Piggy Back Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-FS (see page 70)
DIN Rail Bracket (flat, small) 3.1" [79 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket
5.0" [127 mm]
< 81 >
Fast Ethernet 100BASE-TX to 100BASE-FX Extended Temperature
stand-alone
media converter
E-100BTX-FX-05(xxHT)
Fast Ethernet Media Converter
Table of Contents
Select Media Converter
Select Switch
Extended Temperature Capable:
Designed to operate in environments where ambient temperatures can
rise as high as 65°C (149°F).
Connect remote devices such as
IP based surveillance cameras or
signaling equipment in a nonclimate controlled enclosure.
Deliver 100Mbps data access in
residential or commercial
environments inside a nonclimate controlled pedestal
enclosure.
Extended Temperature Applications (to 65°C)
Ordering Info
See pages 171-181 for complete fiber
optic connector specs.
E-100BTX-FX-05(HT)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
E-100BTX-FX-05(SCHT)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
This converter can also be
deployed in industrial
environments where excessive
heat may be a concern. (Note that
this device is rated to meet
“temperature” requirements of
industrial environments only.)
E-100BTX-FX-05(SMHT)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
E-100BTX-FX-05(LHHT)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
Specifications
Features
Auto-Negotiation
(see page 14)
AutoCross™ (see page 14)
Link Pass Through (see page 15)
Far End Fault Detection
See pages 171-181 for complete fiber optic connector specs.
Standards
Jumper Block 1: AutoCross™ enable
Switches
SW1: Auto-Negotiation On/Off
SW2: Pause TX On/Off
SW3: LPT On/Off
SW4: FEF On/Off
Status LEDs
Power: Lit for normal operation
SDF (Signal Detect Fiber):
Lit for fiber link
SDC (Signal Detect Copper):
Lit for copper link
RXF (Receive Fiber):
Flashing = RX data
RXC (Receive Copper):
Flashing = RX data
(see page 14)
Pause (see page 15)
Visit our website at www.transition.com
IEEE Std. 802.3™ 100BASE-FX;
100BASE-TX
Jumpers
Automatic Link Restoration (see page 16)
< 82 >
E-100BTX-FX-05(XLHT)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 33.0 dB
Dimensions
Width: 3.0" [76 mm]
Depth: 4.7" [119 mm]
Height: 1.0" [25 mm]
Power
External AC/DC required; 9V DC. 1.0A;
unregulated; standard
Environment
-25° C to +65° C; 5% – 95% humidity
non-condensing; 0 – 10,000 feet
altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance
FCC Class A; EN55024; EN55022
Class A; EN61000; CE Mark
Warranty
Lifetime
E-100BTX-FX-05(LWHT)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-CC (see page 72)
Piggy Back Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-FS (see page 70)
DIN Rail Bracket (flat, small) 3.1" [79 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
stand-alone
media converter
Fast Ethernet Just Convert-IT™ 100BASE-TX to 100BASE-FX
mounting options
ethernet
J/FE-CF-03(xx)
Fast Ethernet Media Converter
fast ethernet
Table of Contents
Select Media Converter
Select Switch
Extend Network Distance
Extend Network Distance
in Full-Duplex Networks: Used in pairs, this media
converter can extend distances between two
twisted pair switches or a switch and a server up
to 2 km over multimode fiber or up to 20 km over
single mode fiber.
Ordering Info
J/FE-CF-03
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
J/FE-CF-03(SC)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
Connect Remote Devices
Using a single 100BASE-TX to FX media converter,
a switch with a copper port can be connected to a
switch or any other 100BASE compliant device
with an existing fiber interface.
J/FE-CF-03(SM)
100BASE-TX (RJ-45) [100 m/328 ft.]
100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
J/FE-CF-03(LH)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
Features
Auto-Negotiation
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
(see page 14)
Single Fiber Products
Recommended use in pairs (see page 17)
AutoCross™ (see page 14)
Automatic Link Restoration (see page 16)
Interoperable with other 100BASE-TX/FX NICs,
Specifications
hubs or switches
Standards
IEEE Std. 802.3u™ 100BASE-TX and
100BASE-FX
Provides LEDs for easy network monitoring
Switches
SW1: Auto-Negotiation On/Off
SW2: Full/Half Duplex
Rack-mountable in the E-MCR-04
Status LEDs
Power
Copper: Link & Receive
Fiber: Link & Receive
J/FE-CF-03(100)
100BASE-TX (RJ-45) [100 m/328 ft.]
100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
J/FE-CF-03(101)
100BASE-TX (RJ-45) [100 m/328 ft.]
100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
Optional Accessories
Dimensions
Width: 3.0" [76 mm]
Depth: 3.93" [100 mm]
Height: 0.98" [25 mm]
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-CC (see page 72)
Piggy Back Power Supply
Power
External AC/DC required; +12VDC,
0.5A
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Environment
0 – 60° C; 5% – 95% humidity noncondensing; 0 – 10,000 feet altitude
Shipping Weight
2 lbs. [0.90 kg]
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
Regulatory Compliance
CISPR/EN55022 Class A + EN55204;
FCC Class A; CE Mark
Warranty
Lifetime
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-FS (see page 70)
DIN Rail Bracket (flat, small) 3.1" [79 mm]
WMBS (see page 70)
Wall Mount Bracket 3.2" [81 mm]
Call us at 800-526-9267 or 952-941-7600
< 83 >
Fast Ethernet 100BASE-TX to 100BASE-FX
stand-alone
media converter
SRMFE10xx-20x
Remotely Managed Fast Ethernet Media Converter
In-band management of stand
alone Fast Ethernet media
converters
Remote Loopback assists in
diagnosing network problems
With the Remotely Managed Fast
Ethernet Media Converter, service
providers can now monitor and
manage the entire optical link
from the Central Office (CO) to
the Customer Premise Equipment
(CPE).
Remotely Managed Fast Ethernet
Converters should be used in pairs. Typical
installation will include a chassis card installed in the
Point System™ locally and a stand-alone converter
(SRMFE) installed at the remote location.
(see page 14)
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
SRMFE1011-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
SRMFE1013-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
SRMFE1018-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm MM (MT-RJ)
[2 km/ 1.2 mi.] Link Budget: 14.5 dB
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™
3-position Jumper
Jumper J2: Enable/disable AutoCross™
Jumper J6:
Hardware: Converter mode determined by
4-position switch settings
Software: Converter mode determined by
most recently saved on-board
microprocessor settings.
Features
4 position Switch
Pos 1 Enable/disable twisted pair auto-negotiation
AutoCross™ (see page 14)
Pos 2 Enable/disable twisted pair pause
Link Pass Through (see page 15)
Pos 3 (UP) Enables Link Pass Through.
(DOWN) Disables Link Pass Through
Far End Fault (FEF)
Pos 4 (UP) Enables Far End Fault
(DOWN) Disables Far End Fault.
(see page 14)
Automatic Link Restoration (see page 16)
Pause
Status LEDs
(see page 15)
Loopback
Table of Contents
Select Media Converter
Select Switch
Upstream and downstream
bandwidth control allows
service providers to offer an
array of services
When used in conjunction with a
managed Point System™ Chassis
card, (CRMFE10xx-200), this
stand-alone unit can be managed
remotely. This Fast Ethernet
media converter provides a fullymanaged conversion between 100BASE-TX and
100BASE-FX signals at Customer Premises.
Auto-Negotiation
with remote management &
bandwidth allocation
(see page 16)
Remote Management
Dimensions
Width: 3.25" [83 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Power Consumption
4 watts
Power
External AC/DC required; 12V DC
0.5A; unregulated; standard
Environment
0 – 50° C; 5% – 95% humidity noncondensing; 0 – 10,000 feet altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance
CISPR/EN55022 Class A & B +
EN55024; FCC Class A & B; CE Mark
Warranty
Lifetime
See Also:
Fast Ethernet Remotely Managed
Point System™ Slide-In-Module Media
Converters
page 37
Power
LKF (Fiber Link)
RXF (Fiber Receive)
RXC (Copper Receive)
LKC (Copper Link)
SRMFE1014-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
SRMFE1015-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
SRMFE1016-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
SRMFE1017-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
SRMFE1029-200
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SRMFE1029-201
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SRMFE1029-202
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
SRMFE1029-203
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS or SPS-1872-SA
(see page 72)
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
WMBD or WMBL (see page 70)
Wall Mount Brackets
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
< 84 >
Visit our website at www.transition.com
stand-alone
media converter
Fast Ethernet or ATM/SONET Single Mode to Multimode
Single Mode to Multimode Media Converter
mounting options
ethernet
F-SM-MM-02 & SFMFF1xxx-20x
fast ethernet
Link Pass Through (see page 15)
Automatic Link Restoration (see page 16)
Extend Network Distance
Extend distances up to 80 km with these network protocols that use
1300nm wavelength for fiber optic transmission. In fact, distances can
be extended in any networking protocol between 100Mbps and
155Mbps.
Save money by purchasing Fast Ethernet devices with lower cost
multimode fiber interfaces and use converters to introduce single mode
fiber only where you need it.
Extend Network Distance
Table of Contents
Select Media Converter
Select Switch
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
SFMFF1313-200
1300nm multimode (SC)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
to 1300nm multimode (SC)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
F-SM-MM-02
1300nm multimode (SC)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
SFMFF1415-200
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
F-SM-MM-02(LH)
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
F-SM-MM-02(XL)
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to 1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
SFMFF1417-200
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3
Status LEDs
PWR: Steady green LED indicates connection to external AC
power
LKM or Link (Left): Lit for MM Link
LKS or Link (Right): Lit for SM Link
Dimensions
Width: 3.0" [76 mm]
Depth: 4.7" [119 mm]
Height: 1.0" [25 mm]
Power
External AC/DC required; 12V DC. 0.5A; unregulated;
standard
Environment
0 – 50° C; 5% – 90% humidity non-condensing;
0 – 10,000 feet altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance
CISPR/EN55022 Class A; EN55024; EN61000; FCC Class A;
CE Mark
Warranty
Lifetime
See Also:
Fast Ethernet or ATM/OC-3/SDH/SONET
Point System™ Slide-In-Module Media
Converters
page 38
Call us at 800-526-9267 or 952-941-7600
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
SFMFF1329-204
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
1310nm TX / 1550nm RX single fiber
single mode (SC)
[60 km/37.3 mi.] Link Budget: 28.0 dB
SFMFF1329-205
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
1550nm TX / 1310nm RX single fiber
single mode (SC)
[60 km/37.3 mi.] Link Budget: 27.0 dB
SFMFF1429-200
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
1310nm TX / 1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SFMFF1429-201
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to 1550nm TX / 1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SFMFF1429-202
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to 1310nm TX / 1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
F-SM-MM-02(LW)
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
SFMFF1429-203
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to 1550nm TX / 1310nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
Optional Accessories
SFMFF1329-200
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SFMFF1329-201
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
1550nm TX / 1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SFMFF1329-202
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
1310nm TX / 1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
SFMFF1329-203
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
1550nm TX / 1310nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
(sold separately)
F-SM-MM-02:
SPS-1872-CC (see page 72)
Wide Input (18 – 72VDC) Piggy Back
Power Supply
WMBD-FS (see page 70)
DIN Rail Bracket (flat, small) 3.1" [79 mm]
SFMFF1x29-20x:
SPS-1872-PS (see page 72)
Wide Input (18 – 72VDC) Piggy Back
Power Supply
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
F-SM-MM-02 or SFMFF1x29-20x:
SPS-1872-SA (see page 72)
Wide Input (18 – 72VDC) Stand-Alone
Power Supply
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
< 85 >
stand-alone
media converter
Power Over Ethernet 100BASE-TX to 100BASE-FX
SFEPE101x-1x0
Power over Ethernet PSE Media Converter
Enables enterprises to provide
power to network devices over
the existing CAT5 data
connection.
Transition's AC or DC powered PoE
media converters are Power Sourcing
Equipment (PSE) and are fully
compatible with Powered Devices
(PD) that comply with the
IEEE802.3af™: 2003 standard. The
converters also include a PD
signature sensing and power
monitoring features per the IEEE
802.3af standard.
Combine data received over a
fiber optic link with -48VDC
power; providing power to Data
Terminal Equipment (DTE) Power
Devices (PD) over unshielded
twisted pair cable
Power over Cat5 to Remotely Located Devices
SFEPE10xx-1xx products can operate
in two modes: IEEE 802.3af mode as
well as “legacy mode”. In the IEEE 802.3af mode the POE
is fully compatible with devices that comply with the
IEEE802.3af standard. The POE converter is also capable of
inserting power on either the spare pairs or data pairs of
the MDI.
In the “legacy mode” POE can be configured for reverse
polarity, 12 VDC, 24 VDC, or 48 VDC power insertion; as
well as for other non-IEEE802.3af
compatible PDs.
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
SFEPE1011-100: AC Powered PSE
SFEPE1011-110: DC Powered PSE
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
Switches
IEEE Std. 802.3™; IEEE Std. 802.3af
1&2:
3:
4:
5:
6:
7:
8:
9:
10:
Different voltages & modes are switch selectable.
Features
Internal AC or DC power supply
PWR (power): Lit for normal
operation
MDI Fault: ON = over-current detected
MDI ON: ON = MDI port supplying
power
TX Link: ON = Link on copper port
TX Act: Flashing = data activity on
copper link
FX Link: ON = Link on fiber port
FX Act: Flashing = data activity on
fiber link
Dimensions
Width: 7.3" [185 mm]
Depth: 4.4" [112 mm]
Height: 1.2" [30 mm]
Power
Models SFEPE10xx-100:
90 – 250VAC Internal
(Power Cord Supplied)
Legacy Mode (Non IEEE802.3af)
12, 24, or 48 VDC PSE Output Voltage with Reverse
Polarity Selection
Signal Pair and Spare Pair Power Insertion
Over-Current Protection
Under-Current Detection
Minimum Load Sensing
Set voltage output on twisted pair
IEEE 802.3af mode / Legacy mode
Voltage polarity
MDI power on signal pairs / spare
pairs
Enable / disable Auto-negotiation
Enable / disable Pause
Enable / disable Link Pass Through
Enable / disable Far End Fault
Enable / disable AutoCross™
Status LEDs
IEEE802.3af Power Over Ethernet Compatible Mode
Fault Protection Input
Exceeds IEEE802.3af ripple requirements on PSE MDI
power leads
Models SFEPE10xx-110:
18 – 60VDC; 24 – 48VAC Internal
(Power Cord Supplied)
Max 16.8 Watts Power output capacity at legacy 48 VDC
Power Consumption
45W Max
PSE MDI Power Enable/Disable
Operating Temperature
0 – 50° C [32° – 122°F]
Auto-Negotiation (see page 14)
AutoCross™ (see page 14)
Link Pass Through (see page 15)
Storage Temperature
-25° – 85° C [-13° – 185°F]
Environment
5 – 95% humidity non-condensing;
altitude 0 – 10,000 ft.
Shipping Weight
2 lbs. [0.90 kg]
Regulatory Compliance
EN55022:1994+A1:1996+A2:1997
Class A; FCC Part 15 Subpart B;
UL 1950
Warranty
Lifetime
Far End Fault (FEF) (see page 14)
Automatic Link Restoration (see page 16)
Pause (see page 15)
< 86 >
Table of Contents
Select Media Converter
Select Switch
Visit our website at www.transition.com
SFEPE1013-100: AC Powered PSE
SFEPE1013-110: DC Powered PSE
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SFEPE1014-100: AC Powered PSE
SFEPE1014-110: DC Powered PSE
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Optional Accessories
(sold separately)
Mounting Options:
WMBD-P
DIN Rail Mount Bracket POE
WMBL (see page 70)
Wall Mount Bracket 4.0” [102 mm]
Table of Contents
Select Media Converter
Select Switch
10/100 10/100BASE-TX to 10/100BASE-SX
stand-alone
media converter
Lowest possible cost solution
for fiber installation up to 60
meters (100BASE-SX)
fast ethernet
10/100 bridging
Ideal for building backbone and
horizontal cabling applications
where cost and 10/100 autonegotiation are critical.
Extend Network Distance
mounting options
ethernet
SSETF101x-205
10/100BASE-SX Media Converter
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
Extend Network Distance
Used in pairs, this media converter can extend
distances between two twisted pair switches or a
switch and a server up to 60 meters over multimode
fiber (100BASE-SX).
Ordering Info
Connect Remote Devices
SSETF1013-205
10/100BASE-TX (RJ-45) [100 m/328 ft.]
10/100BASE-SX 850nm multimode (SC)
[60 m/ 197 ft.]
SSETF1011-205
10/100BASE-TX (RJ-45) [100 m/328 ft.]
10/100BASE-SX 850nm multimode (ST)
[60 m/ 197 ft.]
Using a single 10/100BASE-SX media converter, a
switch with a copper port can be connected to a
switch or any other 10/100BASE-SX compliant
device with an existing fiber interface.
Features
Auto-Negotiation
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS (see page 72)
Piggy Back Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Specifications
(see page 14)
AutoCross™ (see page 14)
Link Pass Through (see page 15)
Efficient and Reliable
The 10/100 SX Media Converter operates easily
under heavy traffic loads without generating excess
heat; meaning a failure-prone internal fan is
unnecessary.
Operation
Operates as TIA SP4360A Type I, II device
Standards
IEEE Std. 802.3™; 100BASE-TX,
10BASE-FL, Draft TIA 100BASE-SX-SP4360A
Recommended Optic Cable 62.5/125 µm multimode fiber;
50/125 µm multimode fiber
Optional Optic Cable
Status LEDs
Automatic Link Restoration (see page 16)
100/140 µm multimode fiber;
85/125 µm multimode fiber
PWR (Power): ON = Connection to the
external AC or DC power
SX-ACT (Fiber Activity): Flashing = Data
reception on the fiber link
SX-100 (Fiber Speed):
ON = Fiber link at 100 Mb/s
SX-10 (Fiber Speed):
ON = Fiber link at 10 Mb/s
TX-ACT (Copper Activity): Flashing = Data
reception on the copper link
TX-100 (Copper Speed):
ON = Copper link at 100 Mb/s
TX-10 (Copper Speed):
ON = Copper link at 10 Mb/s
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Power
External AC/DC required; 12V DC. 0.5A;
unregulated; standard
Environment
0 – 50° C; 5% – 90% humidity noncondensing; 0 – 10,000 feet altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL listed and CSA certified
Regulatory Compliance
See Also:
10/100SX Point System™ Slide-In-Module
Media Converters
page 39
Call us at 800-526-9267 or 952-941-7600
Warranty
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-E (see page 70)
DIN Rail Bracket (extended) 4.3" [109 mm]
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
WMBV-E (see page 70)
Vertical Wall Mount Bracket (extended)
4.7" [119 mm]
FCC Class A, CISPR/EN55022 Class A,
CE Mark
Lifetime
< 87 >
stand-alone
media converter
OAM/IP-Based Remotely Managed 10/100BASE-TX to 100BASE-X
OAM/IP-Based Remotely Managed Media Converter
SFBRM10xx-1xx
Table of Contents
Select Media Converter
Select Switch
Applications:
• Ethernet in the First Mile (EFM)
• Fiber to the Premise (FTTP), E-Line and E-LAN
• Enterprise markets
Remotely Manage 10/100 Converters
Features
MEF 9 & MEF 14 Carrier
Ethernet Certification
Two selectable remote
management modes:
• IP-Based remote management
• In-Band OAM 802.3ah
(remote device managed by
local peer)
Ordering Info
See pages 171-181 for complete fiber
optic connector specs.
SFBRM1011-100
SFBRM1011-110 (DMI model)
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SFBRM1013-100
SFBRM1013-110 (DMI model)
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SNMP v1, v2*
AutoCross™ (see page 14)
Auto-Negotiation (see page 14)
SFBRM1014-100
SFBRM1014-110 (DMI model)
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-LX10 1310nm SM (SC)
[20 km/6.2 mi.] Link Budget: 16.0 dB
Pause (see page 15)
Transparent Link Pass Through
(see page 15)
Far-End-Fault (see page 14)
Specifications
See pages 171-181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™, IEEE Std. 802.3ah,
IEEE Std. 802.1P, IEEE Std. 802.1Q,
IEEE Std. 802.1X
Data Rate
Copper: 10/100
Fiber: 100 Mbps
4 egress queues
Filtering Addresses
8K MAC Addresses
Ipv4 IP TOS and DiffServ QOS classification, IPv6
Traffic class
RAM Buffers
256K (2 Mbps)
Max Frame Size
802.3ac tagged: 1628 bytes
untagged: 1632 bytes
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Remote Loopback (see page 16)
Non-Intrusive Echo
IEEE 802.1p™ QOS packet classification with
IEEE 802.1q™ VLAN, 4096 entries
Static MAC, 64 entries
Double VLAN tagging (QinQ)
IEEE 802.1x™ Port based security
Environment
0 – 50°C; 5% – 95% humidity noncondensing; 0 – 10,000 ft. altitude
Power
Input: 100-240 VAC, 1A
Output: 12VDC, 1.25A
RADIUS client
RMON counters for each port
Bandwidth allocation per port (see page 16)
DMI Optical Management
USB port for basic setup
Cable diagnostic function for TP ports
Shipping Weight
2 lbs. [0.90 kg]
Regulatory Compliance
CISPR/EN55022 Class B, EN55024,
EN61000, FCC Class B, CE Mark
Warranty
Lifetime
SFBRM1015-100
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
SFBRM1016-100
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
SFBRM1017-100
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
SFBRM1035-100
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1550nm SM (SC)
[120 km/74.6 mi.] Link Budget: 36.0 dB
SFBRM1040-100
10/100BASE-TX (RJ-45) [100 m]
to SFP slot (empty)
Single Fiber Products
Recommended use in pairs (see page 17)
SFBRM1029-100
SFBRM1029-110 (DMI model)
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-BX-U 1310nm TX/1550nm
RX Bi-Di single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SFBRM1029-101
SFBRM1029-111 (DMI model)
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-BX-D 1550nm TX/1310nm
RX Bi-Di SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
8K MAC addresses
Remote Firmware Upgrade (see page 16)
*Future firmware upgrade; Please contact Transition
Networks for upgrade availability.
See Also:
10/100 OAM / IP-Based Point System™ SlideIn-Module Media Converters
pages 40-41
< 88 >
Visit our website at www.transition.com
Note: all units feature USB port for local
management application.
stand-alone
media converter
OAM/IP-Based Remotely Managed 10/100BASE-TX to 100BASE-X
OAM/IP-Based Remotely Managed Media Converter
For Indoor and Protected Outdoor Applications
mounting options
ethernet
fast ethernet
SFBRM10xx-18x
NEW
10/100 bridging
Indoor/Protected Outdoor Applications (-40°C – 65°C)
• Ethernet in the First Mile (EFM)
• Fiber to the Premise (FTTP), E-Line and E-LAN
• Enterprise markets
Features
Table of Contents
Select Media Converter
Select Switch
Remotely Manage 10/100 Converters
MEF 9 & MEF 14 Carrier
Ethernet Certification
Two selectable remote
management modes:
• IP-Based remote management
• In-Band OAM 802.3ah
(remote device managed by
local peer)
Ordering Info
See pages 171-181 for complete fiber
optic connector specs.
SFBRM1011-180
SFBRM1011-190 (DMI model)
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SFBRM1013-180
SFBRM1013-190 (DMI model)
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SNMP v1, v2*
AutoCross™ (see page 14)
SFBRM1014-180
SFBRM1014-190 (DMI model)
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-LX10 1310nm SM (SC)
[20 km/6.2 mi.] Link Budget: 16.0 dB
Auto-Negotiation (see page 14)
Pause (see page 15)
Transparent Link Pass Through (see page 15)
Far-End-Fault (see page 14)
Remote Loopback (see page 16)
Specifications
See pages 171-181 for complete fiber optic connector specs.
Standards
IEEE 802.1p™ QOS packet classification with
4 egress queues
IEEE Std. 802.3™, IEEE Std. 802.3ah,
IEEE Std. 802.1P, IEEE Std. 802.1Q,
IEEE Std. 802.1X
Data Rate
Copper: 10/100
Fiber: 100 Mbps
Traffic class
Filtering Addresses
8K MAC Addresses
IEEE 802.1q™ VLAN, 4096 entries
RAM Buffers
256K (2 Mb)
Max Frame Size
802.3ac tagged: 1628 bytes
untagged: 1632 bytes
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Ipv4 IP TOS and DiffServ QOS classification, IPv6
Static MAC, 64 entries
Double VLAN tagging (QinQ)
IEEE 802.1x™ Port based security
RADIUS client
Environment
-40 – 65°C; 5% – 95% humidity noncondensing; 0 – 10,000 ft. altitude
RMON counters for each port
Power
Input: 100-240 VAC, 1A
Output: 12VDC, 1.25A
Shipping Weight
2 lbs. [0.90 kg]
Regulatory Compliance
CISPR/EN55022 Class B, EN55024,
EN61000, FCC Class B, CE Mark
Warranty
Lifetime
Bandwidth allocation per port (see page 16)
DMI Optical Management
USB port for basic setup
Cable diagnostic function for TP ports
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
SFBRM1015-180
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
SFBRM1016-180
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
SFBRM1017-180
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
SFBRM1035-180
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1550nm SM (SC)
[120 km/74.6 mi.] Link Budget: 36.0 dB
SFBRM1040-180
10/100BASE-TX (RJ-45) [100 m]
to SFP slot (empty)
Single Fiber Products
Recommended use in pairs (see page 17)
SFBRM1029-180
SFBRM1029-190 (DMI model)
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-BX-U 1310nm TX/1550nm
RX Bi-Di single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
Remote Firmware Upgrade (see page 16)
SFBRM1029-181
SFBRM1029-191 (DMI model)
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-BX-D 1550nm TX/1310nm
RX Bi-Di SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
*Future firmware upgrade; Please contact Transition
Networks for upgrade availability.
SFBRM1029-182
10/100BASE-TX (RJ-45) [100 m]
to 100BASE-FX 1310nm TX/1550nm RX
Bi-Di SM (SC)
[40 km/24.8 mi.] Link Budget: 25.0 dB
8K MAC addresses
See Also:
10/100 OAM / IP-Based Point System™
Slide-In-Module Media Converters
pages 40 - 41
Call us at 800-526-9267 or 952-941-7600
SFBRM1029-183
10/100BASE-TX (RJ-45) [100 m/]
to 100BASE-FX 1550nm TX/1310nm RX
Bi-Di SM (SC)
[40 km/24.8 mi.] Link Budget: 25.0 dB
Note: all units feature USB port for local
management application.
< 89 >
Table of Contents
Select Media Converter
Select Switch
1000 Bridging 100BASE-FX to 1000BASE-X
stand-alone
media converter
OAM/IP-Based Remotely Managed Media Converter
SFBRM13xx-1xx
NEW
Applications:
• Ethernet in the First Mile (EFM)
• Fiber to the Premise (FTTP), E-Line and E-LAN
• Enterprise markets
Features
MEF 9 & MEF 14 Carrier
Ethernet Certification
Two selectable remote
management modes:
• IP-Based remote management
• In-Band OAM 802.3ah
(remote device managed by
local peer)
SNMP v1, v2*
AutoCross™ (see page 14)
Auto-Negotiation
Ipv4 IP TOS and DiffServ QOS
classification, IPv6 Traffic class
IEEE 802.1q™ VLAN, 4096
entries
Static MAC, 64 entries
Double VLAN tagging (QinQ)
IEEE 802.1x™ Port based
security
RADIUS client
RMON counters for each port
Bandwidth allocation per port
(see page 16)
(see page 14)
Pause (see page 15)
Transparent Link Pass Through
(see page 15)
Far-End-Fault (see page 14)
Remote Loopback
(see page 16)
IEEE 802.1p™ QOS packet
classification with four egress
queues
DMI Optical Management
USB port for basic setup
Cable diagnostic function for
TP ports
8K MAC addresses
Remote Firmware Upgrade
(see page 16)
*Future firmware upgrade; Please
contact Transition Networks for
upgrade availability.
Specifications
See pages 171-181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™, IEEE Std. 802.3ah, IEEE Std. 802.1P,
IEEE Std. 802.1Q, IEEE Std. 802.1X
Data Rate
Fiber: 100BASE-FX
Fiber 2: 1000BASE-X
Filtering Addresses
8K MAC Addresses
RAM Buffers
256K (2 Mb)
Max Frame Size
802.3ac tagged: 1628 bytes
untagged: 1632 bytes
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Environment
0 – 50°C; 5% – 95% humidity non-condensing;
0 – 10,000 ft. altitude
Power
Input: 100-240 VAC, 1A
Output: 12VDC, 1.25A
Shipping Weight
2 lbs. [0.90 kg]
Regulatory Compliance
CISPR/EN55022 Class B, EN55024, EN61000,
FCC Class B, CE Mark
Warranty
Lifetime
See Also:
10/100 OAM / IP-Based Point System™
Slide-In-Module Media Converters
pages 40-41
< 90 >
Remotely Manage 1000BASE Converters
Visit our website at www.transition.com
Ordering Info
See pages 171-181 for complete fiber optic connector specs.
SFBRM1313-100
SFBRM1313-110 (DMI Options)
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-SX 850nm Ext. MM (SC)
[62.5/125µm fiber: 300 m/984 ft.] or
[50/125µm fiber: 550 m/1804 ft.]
Link Budget: 7.0 dB
SFBRM1314-100
SFBRM1314-110 (DMI Options)
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-LX10 1310nm SM (SC)
[20 km/6.2 mi.] Link Budget: 12.0 dB
SFBRM1315-100
SFBRM1315-110 (DMI Options)
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 19.0 dB
SFBRM1317-100
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 22.0 dB
SFBRM1335-100
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-LX 1550nm SM (SC)
[125 km/77.7 mi.]
Link Budget: 27.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
SFBRM1329-100
SFBRM1329-110 (DMI Options)
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-BX-U 1310nm TX /
1490nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
SFBRM1329-101
SFBRM1329-111 (DMI Options)
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-BX-D 1490nm TX /
1310nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
SFBRM1329-102
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-BX-U 1310nm TX /
1490nm RX SM (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
SFBRM1329-103
100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
to 1000BASE-BX-D 1490nm TX /
1310nm RX SM (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
Table of Contents
Select Media Converter
Select Switch
10/100BASE-TX Redundant Port Selector
stand-alone
media converter
mounting options
ethernet
fast ethernet
MIL-FT240TX
Fault-Tolerant Redundant Media Converter
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
Fault-Tolerant Redundant Connections
Features
Fault-tolerant redundant connections
Ordering Info
Easy to install and use
MIL-FT240TX
10/100BASE-TX Port Selector
Transceiver
Supports half and full-duplex transmission
AutoCross™ on all 3 ports
Auto-Negotiation
(3) 10/100BASE-TX (RJ-45)
[100 m]
(see page 14)
(see page 14)
Optional Accessories
IEEE 802.3 compliant
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS (see page 72)
Piggy Back Power Supply
Nine diagnostic LEDs
Power supply available for international
applications
The MILAN by Transition FT240TX Redundant Port
Selector is a 10/100 Ethernet fault-tolerant
transceiver. It significantly reduces network
downtime, adding a new level of redundancy to
10/100 Ethernet connections. It also provides a
redundant path for critical 10/100 devices.In a
10/100 Ethernet network, a critical device such as a
file server may be connected to the rest of the
network through a hub or a switch. A common
problem in this configuration is that the server is
often connected to the network through a single
cable. If the cable fails, then the server is
disconnected from the rest of the network. Similarly,
if a port of a hub or switch to which the server is
connected fails, the server is disconnected from the
network.
The FT240TX Redundant Transceiver has three ports:
one for the critical (main) device, one for the default
(primary) path for the critical device, and another
(backup) for the backup path. It is a smart device
that will not send any signal on a path that is not
active. If the primary path loses its link, then the
FT240TX will immediately (in less than one
microsecond) switch to the backup path.
When the primary path re-establishes its link, the
FT240 Redundant Port Selector will automatically
switch back to the primary path.
Call us at 800-526-9267 or 952-941-7600
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Specifications
Standards
IEEE Std. 802.3
RJ-45 Connectors
Type: 8-position, RJ-45 receptacle:
1: TX+
2: TX3: RX+
4: NC (no connection)
Dip Switches
System LEDs
5: NC (no connection)
6: RX7: NC (no connection)
8: NC (no connection)
SW1: Auto-Negotiation Enable/Disable
SW2: 10/100Mbps
SW3: Full/Half Duplex
SW4: non-functioning
Power (PWR): Indicates the presence of
POWER
Primary (PRI): Indicates a link is
established on the Primary port
Backup (BKP): Indicates the link has
moved over to the Backup port.
Per Port LEDs
Lower Right:
Green indicates 100Mbps;
Orange indicates 10Mbps;
Flashing indicates Activity
Lower Left:
Green indicates full-duplex; Off half-duplex
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Power
Domestic
Input: 120 VAC @ 60 Hz.
Output: 12 VDC, 0.5 Amp
International
Input: 100 – 240 VAC @ 50 Hz.
Output: 12 VDC, 1.25 Amp
Operating temperature
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-E (see page 70)
DIN Rail Bracket (extended) 4.3" [109 mm]
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
WMBV-E (see page 70)
Vertical Wall Mount Bracket (extended)
4.7" [119 mm]
0 – 50°C (32°F – 122°F)
Storage temperature
-15°C – 65°C (-5°F – 149°F)
Relative humidity
5% – 95%
Altitude
0 – 10,000 ft.
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed & CSA Certified
Regulatory Compliance
FCC Class A, EN55024, UL 60950,
CE Mark
Warranty
Comprehensive 5 years
< 91 >
stand-alone
media converter
Table of Contents
Select Media Converter
Select Switch
10/100BASE-TX Redundant Link Protector
SBFTF1010-130
Fault-Tolerant Redundant Link Protector
NEW
Fault-tolerant redundant
connections
Auto-Negotiation (see page 14)
Easy to install and use
Nine diagnostic LEDs
Supports half and full-duplex
Optional 3-port switch mode
transmission
IEEE 802.3 compliant
AutoCross™ on all 3 ports
(see page 14)
Fault-Tolerant Redundant Connections
Features
The Redundant Link Protector is a 10/100 Ethernet
fault-tolerant transceiver. It significantly reduces
network downtime, adding a new level of redundancy
to 10/100 Ethernet connections. It also provides a
redundant path for critical 10/100 devices.In a
10/100 Ethernet network, a critical device such as a
file server may be connected to the rest of the
network through a hub or a switch. A common
problem in this configuration is that the server is
often connected to the network through a single
cable. If the cable fails, then the server is
disconnected from the rest of the network. Similarly,
if a port of a hub or switch to which the server is
connected fails, the server is disconnected from the
network.
The Redundant Transceiver has three ports: one for
the critical (main) device, one for the default
(primary) path for the critical device, and another
(backup) for the backup path. It is a smart device
that will not send any signal on a path that is not
active. If the primary path loses its link, then the
transceiver will immediately (in less than one
microsecond) switch to the backup path.
When the primary path re-establishes its link, the
Redundant Link Protector will automatically switch
back to the primary path.
SBFTF1010-130
10/100BASE-TX Link Protector
Transceiver
(3) 10/100BASE-TX (RJ-45)
[100 m]
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS (see page 72)
Piggy Back Power Supply
Specifications
Standards
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
IEEE Std. 802.3
RJ-45 Connectors
Type: 8-position, RJ-45 receptacle:
1: TX+
2: TX3: RX+
4: NC (no connection)
Dip Switches
System LEDs
SW1: Auto-Negotiation Enable/Disable
SW2: 10/100Mbps
SW3: Full/Half Duplex
SW4: Redundancy/Switch
Power (PWR): Indicates the presence of
POWER
Primary (PRI): Indicates a link is
established on the Primary port
Backup (BKP): Indicates the link has
moved over to the Backup port.
Lower Right:
Green indicates 100Mbps;
Orange indicates 10Mbps;
Flashing indicates Activity
Lower Left:
Green indicates full-duplex; Off half-duplex
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Power
Domestic
Input: 120 VAC @ 60 Hz.
Output: 12 VDC, 0.5 Amp
International
Input: 100 – 240 VAC @ 50 Hz.
Output: 12 VDC, 1.25 Amp
Operating temperature
See Also:
< 92 >
Visit our website at www.transition.com
5: NC (no connection)
6: RX7: NC (no connection)
8: NC (no connection)
Per Port LEDs
Optional functionality, controlled via a dip switch,
allows the unit to move from the fault-tolerant mode
to a 3-port switch mode.
10/100 Redundant Link Protector
Point System™ Slide-In-Module Media
Converters
page 42
Ordering Info
0 – 50°C (32°F – 122°F)
Storage temperature
-15°C – 65°C (-5°F – 149°F)
Relative humidity
5% – 95%
Altitude
0 – 10,000 ft.
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed & CSA Certified
Regulatory
Compliance
FCC Class A, EN55024, UL 60950,
CE Mark
Warranty
Lifetime
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
10/100 Bridging 10/100BASE-TX to 100BASE-FX
stand-alone
media converter
10/100 Bridging Media Converter
mounting options
ethernet
fast ethernet
SBFTF10xx-10x
10/100 bridging
Extend network distance up to
10Mbps or 100Mbps on all TP
120 KM
Bridging media converters will
provide conversion and
integration solutions for half and
full-duplex environments.
ports
Table of Contents
Select Media Converter
Select Switch
Half or full-duplex on all ports
including fiber
Features
Auto-Negotiation
(see page 14)
Link Pass Through (see page 15)
(see page 14)
Each port fully manageable
Automatic Link Restoration (see page 16)
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™
Data Rate
10Mbps; 100Mbps
Filtering Addresses
4K MAC addresses
Filtering & Forwarding Rate
14,880pps for Ethernet;
148,800pps for Fast Ethernet
RAM Buffers
256KB
Switches
SW1 (TP): Auto-Negotiation On/Off
SW2 (TP): 10Mbps or 100Mbps with Auto-Negotiation Off
SW3 (TP): Half or Full-duplex with Auto-Negotiation Off
SW4 (Fiber): Half or Full-duplex
SW5: AutoCross™ On/Off
SW6: Link Pass Through On/Off
Dimensions
SBFTF1011-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SBFTF1013-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SBFTF1039-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1300nm MM (LC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
Specifications
Status LEDs
Ordering Info [Class B]
See pages 171–181 for complete fiber optic connector specs.
AutoCross™ (see page 14)
Far End Fault (FEF) Detection
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
PWR (Power): On = connection to external power
FD (Fiber Duplex): On = Full-duplex; Off = Half-duplex
LACT (Fiber Link/Activity): On = Link; Blinking = Activity
Duplex/Link (Copper):
On (Yellow) = Half-duplex Link; Blinking (Yellow) = Halfduplex Activity;
On (Green) = Full-duplex Link;
Blinking (Green) = Full-duplex Activity
Speed (Copper): Yellow = 10 Mbps; Green = 100 Mbps
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Power
External AC/DC; 12VDC, 0.8A min
Environment
0 – 50°C; 5% – 90% humidity non-condensing; 0 – 10,000
feet altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed
Regulatory Compliance
FCC Class A, VCCI Class 1, CISPR22/EN55022 Class A,
EN55024, EN61000, CE Mark
Warranty
Lifetime
See Also:
10/100 Bridging Point System™
Slide-In-Module Media Converters
page 43 - 46
Call us at 800-526-9267 or 952-941-7600
SBFTF1018-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1300nm MM (MT-RJ)
[2 km / 1.2 mi.] Link Budget: 14.5 dB
SBFTF1014-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
SBFTF1019-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310nm SM (LC)
[20 km/12.4 mi.] Link Budget: 17.3 dB
SBFTF1015-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
SBFTF1016-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
SBFTF1017-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
SBFTF1035-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1550nm SM (SC)
[120 km/74.6 mi.] Link Budget: 36.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
SBFTF1029-100
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310nm TX/1550nm RX
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SBFTF1029-101
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SBFTF1029-102
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
SBFTF1029-103
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
SBFTF1029-104
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber SM (SC)
[60 km/37.3 mi.] Link Budget: 28.0 dB
SBFTF1029-105
10/100BASE-TX (RJ-45)
[100 m / 328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber SM (SC)
[60 km/37.3 mi.] Link Budget: 27.0 dB
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS (see page 72)
Piggy Back Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
< 93 >
stand-alone
media converter
10/100 Bridging 10/100BASE-TX to 100BASE-FX Multiport
SBFTF10xx-1xx
10/100 Bridging Multiport Media Converter
Extend network distance up to 120 KM
Extend Network Distance
Bridging media converters will provide conversion
and integration solutions for half-duplex and fullduplex environments.
Features
Auto-Negotiation
(see page 14)
AutoCross™ (see page 14)
10Mbps or 100Mbps on all TP ports
Half or full-duplex on all ports including fiber
Far End Fault (FEF) Detection
(see page 14)
Specifications
Each port fully manageable
Individual switches for both TP ports (-110 only)
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™
LED indications for all operation modes
Data Rate
10Mbps; 100Mbps
Automatic Link Restoration (see page 16)
Filtering Addresses
4K MAC addresses
Filtering & Forwarding Rate
14,880pps for Ethernet;
148,800pps for Fast Ethernet
Source Address Change (SAC) (see page 17)
Fiber Redundancy Mode (-140 only)
When failure on primary fiber occurs it is detected
by a converter; fiber two (secondary) is activated
and becomes the primary link. The original fiber link
(1) is put in the disabled state. It becomes
secondary until the failure on primary fiber occurs.
RAM Buffers
256KB
Switches
SW1 (TP1): Auto-Negotiation On/Off
SW2 (TP1): 10Mbps or 100Mbps with Auto-Negotiation Off
SW3 (TP1): Half or Full-duplex with Auto-Negotiation Off
SW4 (Fiber1): Half or Full-duplex
SW5: AutoCross™ On/Off
SW6: Fiber Redundancy On/Off (xBFTF10xx-14x only)
SW7 (TP2): Auto-Negotiation On/Off
SW8 (TP2): 10Mbps or 100Mbps with Auto-Negotiation Off
SW9 (TP2): Half or Full-duplex with Auto-Negotiation Off
SW10 (TP2): Monitor On/Off
Status LEDs
PWR (Power)
FD (Fiber Duplex)
LACT (Fiber Link/Activity)
Duplex/Link (Copper)
Speed (Copper)
Dimensions
SBFTF10xx-11x:
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
SBFTF10xx-12x & -14x:
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 2.0" [50 mm]
See Also:
10/100 Bridging Point System™
Slide-In-Module Media Converters
Power
External AC/DC; 12VDC, 0.8A min
Environment
0 – 50°C; 5% – 90% humidity non-condensing;
0 – 10,000 feet altitude
Shipping Weight
3 lbs. [1.35 kg]
Safety Compliance
Wall Mount Power Supply: UL Listed
Regulatory Compliance
FCC Class A, VCCI Class 1, CISPR22/EN55022 Class A,
EN55024, EN61000, CE Mark
Warranty
Lifetime
page 43 – 46
< 94 >
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
stand-alone
media converter
Table of Contents
Select Media Converter
Select Switch
10/100 Bridging 10/100BASE-TX to 100BASE-FX Multiport
Ordering Info
Ordering Info
Ordering Info
See pages 171–181 for complete fiber optic
connector specs.
See pages 171–181 for complete fiber optic
connector specs.
See pages 171–181 for complete fiber optic
connector specs.
SBFTF1011-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1300nm multimode (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SBFTF1011-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1300nm multimode (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SBFTF1011-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1300nm multimode (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SBFTF1013-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1300nm multimode (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SBFTF1013-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1300nm multimode (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SBFTF1013-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1300nm multimode (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SBFTF1018-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1300nm multimode (MT-RJ)
[2 km / 1.2 mi.] Link Budget: 14.5 dB
SBFTF1018-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1300nm multimode (MT-RJ)
[2 km / 1.2 mi.] Link Budget: 14.5 dB
SBFTF1018-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1300nm multimode (MT-RJ)
[2 km / 1.2 mi.] Link Budget: 14.5 dB
SBFTF1014-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm single mode (SC)
[20 km / 12.4 mi.] Link Budget: 16.0 dB
SBFTF1014-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm single mode (SC)
[20 km / 12.4 mi.] Link Budget: 16.0 dB
SBFTF1014-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1310nm single mode (SC)
[20 km / 12.4 mi.] Link Budget: 16.0 dB
SBFTF1015-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm single mode (SC)
[40 km / 24.9 mi.] Link Budget: 26.0 dB
SBFTF1015-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm single mode (SC)
[40 km / 24.9 mi.] Link Budget: 26.0 dB
SBFTF1015-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1310nm single mode (SC)
[40 km / 24.9 mi.] Link Budget: 26.0 dB
SBFTF1016-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm single mode (SC)
[60 km / 37.3 mi.] Link Budget: 29.0 dB
SBFTF1016-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm single mode (SC)
[60 km / 37.3 mi.] Link Budget: 29.0 dB
SBFTF1016-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1310nm single mode (SC)
[60 km / 37.3 mi.] Link Budget: 29.0 dB
SBFTF1017-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1550nm single mode (SC)
[80 km / 49.7 mi.] Link Budget: 29.0 dB
SBFTF1017-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1550nm single mode (SC)
[80 km / 49.7 mi.] Link Budget: 29.0 dB
SBFTF1017-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1550nm single mode (SC)
[80 km / 49.7 mi.] Link Budget: 29.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
Single Fiber Products
Recommended use in pairs (see page 17)
Single Fiber Products
Recommended use in pairs (see page 17)
SBFTF1029-110
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km / 12.4 mi.] Link Budget: 19.0 dB
SBFTF1029-120
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km / 12.4 mi.] Link Budget: 19.0 dB
SBFTF1029-140
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km / 12.4 mi.] Link Budget: 19.0 dB
SBFTF1029-111
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km / 12.4 mi.] Link Budget: 19.0 dB
SBFTF1029-121
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km / 12.4 mi.] Link Budget: 19.0 dB
SBFTF1029-141
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km / 12.4 mi.] Link Budget: 19.0 dB
SBFTF1029-112
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[40 km / 24.9 mi.] Link Budget: 25.0 dB
SBFTF1029-122
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[40 km / 24.9 mi.] Link Budget: 25.0 dB
SBFTF1029-142
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[40 km / 24.9 mi.] Link Budget: 25.0 dB
SBFTF1029-113
(2) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[40 km / 24.9 mi.] Link Budget: 25.0 dB
SBFTF1029-123
(5) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (1) 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[40 km / 24.9 mi.] Link Budget: 25.0 dB
SBFTF1029-143
(4) 10/100BASE-TX (RJ-45) [100 m / 328 ft.]
to (2) 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[40 km / 24.9 mi.] Link Budget: 25.0 dB
Optional Accessories
Optional Accessories
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS (see page 72)
Piggy Back Power Supply
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-DPS (see page 72)
Piggy Back Power Supply
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-DPS (see page 72)
Piggy Back Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
Mounting Options:
Mounting Options:
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
Call us at 800-526-9267 or 952-941-7600
< 95 >
stand-alone
media converter
10/100 Bridging Just Convert-IT™ 10/100BASE-TX to 100BASE-FX
J/E-PSW-FX-02(xx)
10/100 Bridging Media Converter
Unit & Port LEDs allow for quick
status information
Auto-Negotiation (see page 14)
AutoCross™ (see page 14)
Table of Contents
Select Media Converter
Select Switch
Ability to force 10Mbps or
100Mbps (TP port) and full or
half-duplex on both copper and
fiber.
Automatic Link Restoration
(see page 16)
The "Just Convert-It™" Bridging Media Converter is
an inexpensive, no frills way to extend the distance
between connections with different speeds or duplex
using fiber optic cable, while maintaining the same
quality and reliability found on Transition's fullfeatured line of products.
Ordering Info
J/E-PSW-FX-02
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
J/E-PSW-FX-02(SC)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
10/100 Bridging
Connect Legacy Networking Equipment
Connect an existing 10Mbps device to
100Mbps devices.
J/E-PSW-FX-02(SM)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
J/E-PSW-FX-02(100)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
Eliminate Collision Domains
Connect two half-duplex hubs with a fullduplex connection over fiber containing no
collisions.
J/E-PSW-FX-02(101)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-CC (see page 72)
Piggy Back Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Specifications
Standards
IEEE Std. 802.3™, IEEE Std. 802.3ab™
Switches
SW1: Auto-Negotiation (UP = enable)
SW2: Full/Half Duplex (Copper) (UP =
full-duplex)
SW3: Force Speed (Copper) (UP =
100Mbps)
SW4: Full/Half Duplex (Fiber)
(UP = full-duplex)
Dimensions
Status LEDs
< 96 >
Width: 3.0" [76 mm]
Depth: 3.9" [100 mm]
Height: 1.0" [25 mm]
PWR: Lit for normal operation
LNK Act (fiber): Steady = Link;
Flashing = Rx Data
FD (fiber duplex): On = Full duplex
LNK Act (copper): Steady = Link;
Flashing = Rx Data
FD (copper duplex): On = Full duplex
100 (copper speed): On = 100Mbps
Visit our website at www.transition.com
Power
External AC/DC required; +12VDC,
0.5 A min
Power Consumption
2.5 watts
Environment
0 – 50° C operating; 5% – 95% humidity
non-condensing;
0 – 10,000 feet altitude
Shipping Weight
2 lbs. [0.90 kg]
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
Safety Compliance
Wall Mount Power Supply:
UL Listed, C-UL Listed (Canada)
WMBD-FS (see page 70)
DIN Rail Bracket (flat, small) 3.1" [79 mm]
Regulatory Compliance
FCC Class A, CISPR22/EN55022
Class A, EN55024, CE Mark
WMBS (see page 70)
Wall Mount Bracket 3.2" [81 mm]
Warranty
Lifetime
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
stand-alone
media converter
Power Over Ethernet 10/100BASE-TX to 100BASE-FX
Table of Contents
Select Media Converter
Select Switch
mounting options
ethernet
fast ethernet
SPOEB10xx-100
Power over Ethernet PSE Media Converter
10/100 bridging
Enables enterprises to provide power to
network devices over the existing CAT5
data connection.
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
Power over Cat5 to Remotely Located Devices
Transition's AC powered PoE media
converters combine data received over
a fiber optic link with -48VDC power;
providing power to Data Terminal
Equipment (DTE) Power Devices (PD)
over unshielded twisted pair cable. The
PoE converters are Power Sourcing
Equipment (PSE) and are fully
compatible with Powered Devices (PD)
that comply with the IEEE802.3af™:
2003 standard. The converters also
include a PD signature sensing and power monitoring
features per the IEEE 802.3af standard. Other features
include Over-Current Protection, Under-Current Detection
and Fault Protection Input.
Ordering Info
SPOEB1011-100
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SPOEB1013-100
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Specifications
Standards
IEEE Std. 802.3™, IEEE Std. 802.3af
Switches
SW1: Auto-Negotiation On/Off
SW2: Speed TP: Force 10Mbps or
100Mbps (SW1 off)
SW3: Duplex TP: Force Half or Full
Duplex (SW1 off)
SW4: Duplex Fiber: Half or Full Duplex
SW5: AutoCross™ On/Off
SW6: PSE On/Off
SW7: PSE/LPT on/off
SW8: Unused
This feature enhanced model offers the ability to
enable/disable many of the features as well as force port
capabilities (see switch section under specifications to the
right).
In addition, with the PSE/LPT switch enabled, a loss of
Fiber RX will disable PSE power output on the UTP port for
2 seconds to allow remote device to re-initialize.
The PoE converter is fully compatible with devices that
comply with the IEEE802.3af standard. The PoE converter
is capable of inserting power on data pairs of the MDI.
SPOEB1014-100
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [120 mm]
Height: 1.0" [25 mm]
Power
90 – 250VAC external power supply
Features
Power Consumption
20W max.
External AC power supply
Operating Temperature
0 – 40°C [32° – 104°F]
IEEE802.3af Power Over Ethernet Compatible
Storage Temperature
-25° to +85°C [-13° to +185°F]
Environment
5% – 95% humidity non-condensing;
0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Compliance
EN55022:1994+A1:1996+A2:1997
Class A; FCC Part 15 Subpart B;
UL 1950
Warranty
Lifetime
48 VDC PSE Output Voltage
Signal Pair Power Insertion
PD Detection Signature
Over-Current Protection & Under-Current Detection
Powered Device Reset
SPOEB1015-100
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
SPOEB1016-100
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
SPOEB1017-100
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
SPOEB1035-100
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[120 km/74.6 mi.] LB: 36.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
SPOEB1029-100
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
SPOEB1029-101
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
Optional Accessories
Switch selectable features and port settings
(sold separately)
Minimum Load Sensing
WMBD or WMBL (see page 70)
Wall Mount Brackets
Fault Protection Input
Mounting Options:
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
Auto-Negotiation (see page 14)
AutoCross™ (see page 14)
Link Pass Through (see page 15)
Far End Fault (FEF) (see page 14)
Automatic Link Restoration (see page 16)
Call us at 800-526-9267 or 952-941-7600
< 97 >
stand-alone
media converter
Power Over Ethernet Just Convert-IT™ 10/100BASE-TX to 100BASE-FX
J/POE-CF-01(xx)
Power over Ethernet PSE Media Converter
Enables enterprises to provide power to
network devices over the existing CAT5
data connection.
Power over Cat5 to Remotely Located Devices
Transition's AC powered PoE media
converters combine data received over
a fiber optic link with -48VDC power;
providing power to Data Terminal
Equipment (DTE) Power Devices (PD)
over unshielded twisted pair cable. The
PoE converters are Power Sourcing
Equipment (PSE) and are fully
compatible with Powered Devices (PD)
that comply with the IEEE802.3af™:
2003 standard. The converters also
include a PD signature sensing and
power monitoring features per the IEEE
802.3af standard. Other features include
Over-Current Protection, Under-Current Detection and Fault
Protection Input.
The PoE converter is fully compatible with devices that
comply with the IEEE802.3af standard. The PoE converter
is capable of inserting power on data pairs of the MDI.
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
J/POE-CF-01
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
J/POE-CF-01(SC)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Specifications
See pages 171–181 for complete fiber optic connector specs.
IEEE Std. 802.3™, IEEE Std. 802.3af
Max Packet Size
1522 bytes
Optional Accessories
MAC Addresses
2K
(sold separately)
Mounting Options:
Status LEDs
External AC power supply
IEEE802.3af Power Over Ethernet Compatible
48 VDC PSE Output Voltage
Signal Pair Power Insertion
PD Detection Signature
Over-Current Protection
Under-Current Detection
PWR: Lit for normal operation
LACT (Fiber): ON = Link; Blinking =
Activity
DPX (Fiber): ON = Full-duplex;
OFF = Half-duplex; Blinking = collision
LACT (TP): ON = Link; Blinking = Activity
SPD (TP): ON = 100Mb/s; Off = 10Mb/s
DPX (TP): ON = Full-duplex;
OFF = Half-duplex; Blinking = Collision
ON (TP): ON = PSE power being delivered
ERR (TP): ON (solid) = main power
over/under voltage;
Blink 1/second: no signature detected;
Blink 2/second: overload while applying
power;
Blink 3/second: short circuit detected;
Blink 4/second: multiple problems
detected
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [120 mm]
Height: 1.0" [25 mm]
Power
External AC/DC required; 48V DC,
0.67A
Power Consumption
20W max.
Minimum Load Sensing
Power Output
16.8W max.
Fault Protection Input
Operating Temperature
0 – 40°C [32° – 104°F]
Auto-Negotiation (see page 14)
AutoCross™ (see page 14)
Link Pass Through (see page 15)
Storage Temperature
-25° to +85°C [-13° to +185°F]
Environment
5% – 95% humidity non-condensing;
0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Regulatory Compliance
EN55022:1994+A1:1996+A2:1997
Class A; FCC Part 15 Subpart B;
UL 1950
Safety Compliance
Wall Mount Power Supply:
UL Listed & CSA certified
Warranty
Lifetime
Far End Fault (FEF) (see page 14)
Automatic Link Restoration (see page 16)
Visit our website at www.transition.com
J/POE-CF-01(SM)
[2 km/1.2 miles] Link Budget:
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Standards
Features
< 98 >
Table of Contents
Select Media Converter
Select Switch
WMBD (see page 70)
DIN Rail Mount Bracket 5.0" [127 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0” [102 mm]
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
stand-alone
media converter
10/100 Bridging 10/100BASE-TX to 100BASE-FX
mounting options
ethernet
fast ethernet
Mx/E-PSW-FX-01(xx)
Mini 10/100 Bridging Media Converter
10/100 bridging
Table of Contents
Select Media Converter
Select Switch
Connect Legacy Networking Equipment
Connect an existing 10Mbps device to 100Mbps devices.
Connect Legacy Devices & Eliminate
Collision Domains
Separate Collision Domains while linking two half-duplex
hubs with a collision free full-duplex connection over fiber.
M/E-PSW-FX-01(SC)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
The Mini Media Converters provide a cost-effective method
for integrating fiber optic cabling into a 10/100 UTP
environment. With its miniature size, the Mini offers a
space saving alternative while it converts copper to fiber
with the smallest footprint available in the industry.
M/E-PSW-FX-01(SM)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Powering Options
Depending upon the unit, this plug-and-play media
converter offers three methods for powering the unit. All
Mini's can be powered with the included power adapter,
while other options include powering through a USB port
or though an 802.3af Power over Ethernet enabled RJ-45
port.* Two power options can be used simultaneously,
providing the security of redundant power supplies. The
Mini is available with either ST or SC fiber interfaces and is
available for either multimode or single mode fiber.
M/E-PSW-FX-01(100)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
M/E-PSW-FX-01(101)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
Standard Power Adapter and POE
enabled RJ-45 option (PD):
Specifications
Standards
IEEE Std. 802.3™, 802.3af
Status LEDs
PWR (Power): (below RJ-45)
ON = Link; Flashing = Activity
FX-Link/Act (Fiber Link/Activity):
(Upper Left on RJ-45)
ON = Link; Flashing = Activity
TX-Link/Act (Copper Link/Activity):
(Upper Right on RJ-45)
ON = Link; Flashing = Activity
Features
Unit and Port LEDs allow for quick status information
Auto-Negotiation (see page 14)
Fixed Full-Duplex on fiber
Dimensions
Fixed Link Pass Through on POE and USB powered units
(see page 15)
Width: 1.8" [46 mm]
Depth: 3.3" [85 mm]
Height: 0.85" [22 mm]
Power Consumption
2.6 watts
Automatic Link Restoration (see page 16)
Power Sources
Unit accepts 5VDC to 50VDC
Wall Mount AC adapter: 12VCD
400mA
USB connector: 5VDC
TP connector IEEE802.3af PD device:
36 to 57 VDC
AutoCross™ (see page 14)
Far End Fault on all three versions (see page 14)
Powering Options: Standard power adapter;
POE enabled RJ-45; or USB port
Operating Temp
0°C to 50°C (32°F to 122°F)
M/E-PSW-FX-01(xx) features:
Auto-Negotiation
AutoCross™
Far End Fault
Storage Temp
-15°C to 65°C (-5°F to 149°F)
Humidity
5% – 95% humidity non-condensing
Altitude
0 – 10,000 ft. altitude
MP/E-PSW-FX-01(xx) features:
Auto-Negotiation
AutoCross™
Link Pass Through
Far End Fault
POE PD
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed, C-UL Listed (Canada)
Regulatory Compliance
FCC Class A, CISPR22/EN55022
Class A, EN55024, CE Mark
Warranty
Lifetime
MU/E-PSW-FX-01(xx) features:
Auto-Negotiation
AutoCross™
Link Pass Through
Far End Fault
Call us at 800-526-9267 or 952-941-7600
Standard Power Adapter:
M/E-PSW-FX-01
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Eliminate Collision Domains
*MP/E-PSW-FX-01(xx) supporting the IEEE 802.3af Power
over Ethernet standard allows this converter to be a
Powered Device (PD) and draw its power from Power
Sourcing Equipment (PSE) that is also compliant with the
IEEE 802.3af standard.
Ordering Info
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
MP/E-PSW-FX-01
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
MP/E-PSW-FX-01(SC)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
MP/E-PSW-FX-01(SM)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Standard Power Adapter and USB
powered option:
MU/E-PSW-FX-01
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
MU/E-PSW-FX-01(SC)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
MU/E-PSW-FX-01(SM)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
MU/E-PSW-FX-01(100)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX / 1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
MU/E-PSW-FX-01(101)
10/100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX / 1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
< 99 >
10/100/1000 Ethernet 10/100/1000BASE-T to 1000BASE-SX/LX
stand-alone
media converter
10/100/1000 Ethernet Media Converter
Extend Network Distance
This media converter offers a
low-cost integration option for
network managers who want to
migrate from 10/100 networks to
Gigabit Ethernet. Gigabit only
switches can now be connected
to 10/100 networks up to 125 km
away over single mode fiber or up
to 40 km over single fiber without
SGFEB10xx-10x
Table of Contents
Select Media Converter
Select Switch
the need to upgrade the 10/100
side; allowing network managers
to add new equipment gradually.
In addition to the standard 220
meters with standard SX optics,
Transition Networks also offers a
proprietary solution that will allow
users to transmit up to 2 km over
multimode (62.5/125µm) fiber
(xGFEB1024-100).
Extend Network Distance
Features
Auto-Negotiation
(see page 14)
Switch-selectable speeds on copper when Auto-Negotiation is off
AutoCross™ on TX port (see page 14)
Link Pass Through (see page 15)
Automatic Link Restoration (see page 16)
Pause (see page 15)
Remote Fiber Fault Detection
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3ab & IEEE Std. 802.3™
Data Rate
Copper: 10/100/1000 Mbps
Fiber: 1000 Mbps
Max. Packet Size
1536 bytes
RAM Buffers
256K
Filtering Addresses
4K MAC Addresses
Dip Switches
Switch 1: TX - AutoNeg Enable/Disable
Switch 2: TX - Force 10Mbs or 100Mbs with AutoNeg off
Switch 3: TX - Force Half or Full duplex with AutoNeg off
Switch 4: FBR - AutoNeg Enable/Disable
Switch 5: not used
Switch 6: LPT Enable/Disable
Jumpers
Jumper (ED): Enable/Disable AutoCross™
Status LEDs
TP (Duplex/Link/Activity):
Yellow: ON = Half-Duplex Link;
BLINK = Activity
Green: ON = Full-Duplex Link;
BLINK = Activity
TP (10Mbs/100Mbs/1000Mbs):
Off = 10Mbs; Yellow = 100Mbs; Green = 1000Mbs
PWR (Power): Green: ON = Power applied to board
LACT (Fiber Link/Activity):
Green: ON = Link; BLINK = Activity
DPX (Fiber Duplex): Green: ON = Full; OFF = Half
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Power
External AC/DC required: 12V DC, 1.25 A, unregulated, standard
Power Consumption
8 watts
Environment
0 – 50°C operating, 5% – 95% humidity non-condensing,
0 – 10,000 feet altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply: UL listed & CSA certified
Regulatory Compliance
FCC Class A, CISPR/EN55022 Class A,
EN55024, ICES-003, CE Mark
Warranty
Lifetime
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
SGFEB1013-100
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m/722 ft.]
Link Budget: 7.0 dB
[50/125µm fiber: 550 m/1804 ft.]
Link Budget: 7.0 dB
SGFEB1024-100
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-SX 1310nm Extended MM
(62.5/125 µm fiber only) (SC)
[up to 2 km] Link Budget: 7.0 dB
SGFEB1014-100
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
SGFEB1015-100
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB
SGFEB1017-100
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 20.0 dB
SGFEB1035-100
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1550nm SM (SC)
[125 km/77.7 mi.] Link Budget: 27.0 dB
SGFEB1040-100
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-X SFP Slot (empty)
See right for SFP Modules.
Single Fiber Products
Recommended use in pairs (see page 17)
SGFEB1029-100
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
SGFEB1029-101
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
SGFEB1029-102
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
SGFEB1029-103
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
See Pages 135 & 136 for Compatible SFP
Modules.
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS or SPS-1872-SA
(see page 72)
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
WMBD (see page 70)
DIN Rail Mount Bracket 5.0" [127 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0” [102 mm]
< 100 >
Visit our website at www.transition.com
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
stand-alone
media converter
OAM/IP Remotely Managed 10/100/1000BASE-T to 1000BASE-X
Remotely Managed 10/100/1000 Converters
mounting options
ethernet
fast ethernet
10/100 bridging
SBFFG10xx-1xx
NEW
10/100/1000
Applications:
• Ethernet in the First Mile (EFM)
• Fiber to the Premise (FTTP), E-Line and E-LAN
• Enterprise markets
Table of Contents
Select Media Converter
Select Switch
Features
Remotely Manage 10/100/1000 Converters
Ordering Info
MEF 9 & MEF 14 Carrier
Ethernet Certification
See pages 171–181 for complete fiber optic
connector specs.
Two selectable remote
SBFFG1013-100
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-SX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 7.0 dB
management modes:
• IP-Based remote management
• In-Band OAM 802.3ah
(remote device managed by
local peer)
SBFFG1014-100
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
SNMP
SBFFG1015-100
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB
AutoCross™ (see page 14)
Auto-Negotiation (see page 14)
SBFFG1017-100
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-X 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 21.0 dB
Pause (see page 15)
Transparent Link Pass Through (see page 15)
Specifications
Far-End-Fault (see page 14)
See pages 171–181 for complete fiber optic connector specs.
Remote Loopback (see page 16)
Standards
IEEE Std. 802.3™, IEEE Std. 802.3ah,
IEEE Std. 802.1P, IEEE Std. 802.1Q,
IEEE Std. 802.1X
Data Rate
Copper: 10/100/1000
Fiber: 1000 Mbps
Filtering Addresses
8K MAC Addresses
Non-Intrusive Echo
IEEE 802.1p™ QOS packet classification with
4 egress queues
Ipv4 IP TOS and DiffServ QOS classification, IPv6
Traffic class
IEEE 802.1q™ VLAN, 4096 entries
Static MAC, 64 entries
RAM Buffers
256K (2 Mb)
Max Frame Size
802.3ac tagged: 1628 bytes
untagged: 1632 bytes
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Double VLAN tagging (QinQ)
VLAN Tunneling
Environment
0 – 50°C; 5% – 95% humidity noncondensing; 0 – 10,000 ft. altitude
IEEE 802.1x™ Port based security
Power
Input: 100-240 VAC, 1A
Output: 12VDC, 1.25A
Shipping Weight
2 lbs. [0.90 kg]
Regulatory Compliance
CISPR/EN55022 Class B, EN55024,
EN61000, FCC Class B, CE Mark
Warranty
Lifetime
RADIUS client
RMON counters for each port
Bandwidth allocation per port (see page 16)
DMI Optical Management
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
SBFFG1035-100
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-X 1550nm SM (SC)
[120 km/77.7 mi.] Link Budget: 27.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
SBFFG1029-100
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-BX-U 1310nm TX/1550nm
RX Bi-Di SM (SC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
SBFFG1029-101
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-BX-D 1550nm TX/1310nm
RX Bi-Di SM (SC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
SBFFG1029-102
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-LX 1310nm TX/1550nm RX
Bi-Di SM (SC)
[40 km/24.8 mi.] Link Budget: 20.0 dB
SBFFG1029-103
10/100/1000B-T (RJ-45) [100 m]
to 1000BASE-LX 1550nm TX/1310nm RX
Bi-Di SM (SC)
[40 km/24.8 mi.] Link Budget: 20.0 dB
Note: all units feature USB port for local
management application.
USB port for basic setup
Cable diagnostic function for TP ports
8K MAC addresses
Remote Firmware Upgrade (see page 16)
*Future firmware upgrade; Please contact Transition
Networks for upgrade availability.
See Also:
OAM/IP-Based Remotely Managed
Point System™ Slide-In-Module Media
Converters
pages 49 - 50
Call us at 800-526-9267 or 952-941-7600
< 101 >
Table of Contents
Select Media Converter
Select Switch
1000 Bridging 1000BASE-X to 1000BASE-X
stand-alone
media converter
OAM/IP-Based Remotely Managed Media Converter
SBFFG13xx-1xx
NEW
Applications:
• Ideal for Demarcation Services in FTTx
• Ethernet in the First Mile (EFM)
• Fiber to the Premise (FTTP), E-Line and E-LAN
• Enterprise markets
Features
classification, IPv6 Traffic class
MEF 9 & MEF 14 Carrier
Ethernet Certification
IEEE 802.1q™ VLAN, 4096
entries
Two selectable remote
management modes:
• IP-Based remote management
• In-Band OAM 802.3ah
(remote device managed by
local peer)
Static MAC, 64 entries
Double VLAN tagging (QinQ)
IEEE 802.1x™ Port based
security
RADIUS client
SNMP v1, v2*
RMON counters for each port
Auto-Negotiation (see page 14)
Bandwidth allocation per port
Pause (see page 15)
(see page 16)
Transparent Link Pass Through
(see page 15)
DMI Optical Management
on -110 models
Far-End-Fault (see page 14)
USB port for basic setup
Remote Loopback
8K MAC addresses
(see page 16)
Remote Firmware Upgrade
IEEE 802.1p™ QOS packet
(see page 16)
classification with four egress
queues
*Future firmware upgrade; Please
contact Transition Networks for
upgrade availability.
Ipv4 IP TOS and DiffServ QOS
Specifications
See pages 171-181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™, IEEE Std. 802.3ah, IEEE Std. 802.1P, IEEE
Std. 802.1Q, IEEE Std. 802.1X
Data Rate
Fiber: 1000BASE-X
Fiber 2: 1000BASE-X
Filtering Addresses
8K MAC Addresses
RAM Buffers
256K (2 Mb)
Max Frame Size
802.3ac tagged: 1628 bytes
untagged: 1632 bytes
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Environment
0 – 50°C; 5% – 95% humidity non-condensing;
0 – 10,000 ft. altitude
Power
Input: 100-240 VAC, 1A
Output: 12VDC, 1.25A
Shipping Weight
2 lbs. [0.90 kg]
Regulatory Compliance
CISPR/EN55022 Class B, EN55024, EN61000,
FCC Class B, CE Mark
Warranty
Lifetime
See Also:
OAM/IP-Based Remotely Managed Point
System™ Slide-In-Module Media Converters
pages 49 - 50
< 102 >
Remotely Manage 1000BASE Converters
Visit our website at www.transition.com
Ordering Info
See pages 171-181 for complete fiber optic connector specs.
SBFFG1313-100
SBFFG1313-110 (DMI Options)
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
SBFFG1314-100
SBFFG1314-110 (DMI Options)
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-LX10 1310nm SM (SC)
[10 km / 6.2 miles]
SBFFG1315-100
SBFFG1315-110 (DMI Options)
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-LX 1310nm SM (SC)
[30 km / 18.6 miles]
SBFFG1317-100
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-LX 1550nm SM (SC)
[65 km / 40.4 miles]
SBFFG1335-100
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-LX 1550nm SM (SC)
[120 km / 74.6 miles]
SBFFG3535-100
1000BASE-LX 1550nm SM (SC)
[120 km / 74.6 miles]
to 1000BASE-LX 1550nm SM (SC)
[120 km / 74.6 miles]
SBFFG1340-100
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-X SFP Slot (Empty)
Single Fiber Products
Recommended use in pairs (see page 17)
SBFFG1329-100
SBFFG1329-110 (DMI Options)
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-BX-U 1310nm TX /
1490nm RX single fiber SM (SC)
[20 km / 12.4 miles]
SBFFG1329-101
SBFFG1329-111 (DMI Options)
1000BASE-SX 850nm MM (SC)
[220 m/722 ft.] or [550 m/1804 ft.]*
to 1000BASE-BX-D 1490nm TX /
1310nm RX single fiber SM (SC)
[20 km / 12.4 miles]
*[220 m/722 ft.: 62.5/125µm fiber]
*[550 m/1804 ft.: 50/125µm fiber]
10/100/1000 802.3ah Bridging 10/100/1000BASE-TX to 1000BASE-BX/SX/LX
stand-alone
media converter
10/100/1000 802.3ah Bridging Media Converter
mounting options
ethernet
fast ethernet
10/100 bridging
SMEFG10xx-1xx
10/100/1000
Applications
• Ethernet in the First Mile (EFM)
• Fiber to the Premise (FTTP), E-Line and E-LAN
• Enterprise markets
Table of Contents
Select Media Converter
Select Switch
Features
RMON Statistics
IEEE 802.3ah™ compliant
Automatic Link Restoration
(see page 16)
In-band OAM management
(Operation, Administration &
Maintenance)
Symmetric and Asymmetric Pause
(see page 15)
10/100/1000Mbs Auto-Negotiation
or forced mode operation on the TP
interface (see page 14)
Remote Loopback assists in
diagnosing network problems (per
802.3ah) (see page 16)
Fiber Auto-Negotiation
enable/disable to support legacy
devices (see page 14)
Bandwidth allocation: Upstream
and downstream in 64KB increments
(see page 16)
AutoCross™ (see page 14)
Remote Firmware Upgrade
(see page 16)
Transparent Link Pass Through
(see page 15)
QoS Management
802.1Q VLAN Tagging
Static VLANs
Remote Link Loss detection &
notification
DMI management interface for
optical monitoring of temperatures
and power on -110 models.
Basic management including
Discovery & Loopback; available when
connected to third party 802.3ah
compliant fiber switch.
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™; IEEE Std. 802.3ah™; IEEE Std. 802.1P;
IEEE Std. 802.1Q
Data Rate
Copper: 10/100/1000 Mbps
Fiber: 1000 Mbps
Filtering Addresses
4K MAC Addresses
RAM Buffers
256K (2 Mbps)
Status LEDs
TP (Duplex/Link/Activity):
Yellow: ON = Half-Duplex Link; BLINK = Activity
Green: ON = Full-Duplex Link; BLINK = Activity
TP (10Mbs/100Mbs/1000Mbs):
Off = 10Mbs; Yellow = 100Mbs; Green = 1000Mbs
PWR (Power): Green: ON = Power applied to board
LACT (Fiber Link/Activity): Green: ON = Link;
BLINK = Activity
FD (Fiber Duplex): Green: ON = Full; OFF = Half
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Power
External AC/DC required: 12V DC, 1.25A, unregulated,
standard
Power Consumption
5.1 watts
Environment
0 – 50°C operating,
5% – 95% humidity non-condensing,
0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL and C-UL listed (Canada)
Regulatory Compliance
FCC Class A, CISPR/EN55022 Class A, EN55024, EN61000,
CE Mark
Warranty
Lifetime
Call us at 800-526-9267 or 952-941-7600
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
Remotely Manage 10/100/1000 Converters
Must be used with the
Point System™ Chassis
Card CMEFG10xx-1xx for
full management capability
including Bandwidth
Provisioning, Digital
Diagnostics & remote
firmware upgrades.
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
Note: All stand-alone models also have a DB-9 serial interface to management
SMEFG1013-100: Link Budget: 7.0 dB
SMEFG1013-110 (with DMI mgmt.)
Link Budget: 8.5 dB
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-SX 850nm multimode (SC)
[62.5/125 µm: 220 m/722 ft.]
[50/125 µm: 550 m/1804 ft.]
SMEFG1039-100
SMEFG1039-110 (with DMI mgmt.)
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-SX SFP Bundle: 850nm
multimode (LC)
[62.5/125 µm: 220 m/722 ft.]
Link Budget: 7.5 dB
[50/125 µm: 550 m/1804 ft.]
Link Budget: 7.5 dB
SMEFG1019-100
SMEFG1019-110 (with DMI mgmt.)
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX SFP Bundle: 1310nm
single mode (LC)
[10 km/6.2 mi.] Link Budget: 11.5 dB
SMEFG1014-100: Link Budget: 7.0 dB
SMEFG1014-110 (with DMI mgmt.)
Link Budget: 12.0 dB
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX-10 1310nm SM (SC)
[10 km/6.2 mi.]
SMEFG1015-100: Link Budget: 15.0 dB
SMEFG1015-110 (with DMI mgmt.)
Link Budget: 19.0 dB
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[30 km/18.6 mi.]
SMEFG1017-100
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 21.0 dB
SMEFG1035-100
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1550nm SM (SC)
[120 km/74.6 mi.] Link Budget: 27.0 dB
SMEFG1040-100
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-X SFP Slot (empty)
See page 121 for SFP modules.
Single Fiber Products
Recommended use in pairs (see page 17)
SMEFG1029-100: Link Budget: 14.0 dB
SMEFG1029-110 (with DMI mgmt.)
Link Budget: 11.0 dB
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-BX-U 1310nm TX / 1490nm
RX single fiber single mode (SC)
[20 km/12.4 mi.]
SMEFG1029-101: Link Budget: 14.0 dB
SMEFG1029-111 (with DMI mgmt.)
Link Budget: 11.0 dB
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-BX-D 1490nm TX / 1310nm
RX single fiber single mode (SC)
[20 km/12.4 mi.]
SMEFG1029-102
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-BX-U 1310nm TX / 1490nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
SMEFG1029-103
10/100/1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-BX-D 1490nm TX / 1310nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
Single fiber options for 40 km, 60 km,
80 km and 120 km are available upon
request. Please contact Transition
Networks.
< 103 >
stand-alone
media converter
Gigabit Ethernet 1000BASE-T to 1000BASE-SX/LX
Gigabit Ethernet Media Converter
Migrate to Gigabit Ethernet in a
cost-effective manner.
Used in conjunction with lower cost
1000BASE-T switches, companies can
take advantage of the high bandwidth
Gigabit Ethernet offers without all of
the higher costs.
SGETF10xx-110
Table of Contents
Select Media Converter
Select Switch
Transition Networks’s 1000BASE-T to
SX/LX converters allow users to
extend the bandwidth to those users
outside the reach of the 1000BASE-T
standard (up to 125 km).
Migrate to Gigabit Ethernet
Features
Copper & Fiber Auto-Negotiation (see page 14)
Transparent Link Pass Through (see page 15)
Automatic Link Restoration (see page 16)
Pause (see page 15)
Remote Fault Detect
(see page 17)
Specifications
Standards
IEEE Std. 802.3ab™ and IEEE Std. 802.3™
6-position Switch
SW1: Remote Fiber Fault Detect (Down=Enabled)
SW2: Symmetric Pause
SW3: Asymmetric Pause
SW4: Transparent Link Pass Through (UP=Enabled)
SW5: Fiber Auto-Negotiation (Down=Enabled)
SW6: Loopback (Down=Enabled)
Status LEDs
PWR (Power): Steady green LED indicates connection to
external AC power
RXF (Fiber receive): Flashing LED indicates reception of data
on fiber link
LKF (Fiber link): Steady LED indicates fiber link connection
RXC (Copper receive): Flashing LED indicates reception of
data on copper link
LKC (Copper link): Steady LED indicates copper link
connection
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Power
External AC/DC required; 12V DC, 1.5A; unregulated;
standard
Environment
0 – 50° C operating; 5% – 95% humidity non-condensing;
0 – 10,000 feet altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply: UL Listed, C-UL Listed (Canada)
Regulatory Compliance
FCC Class A, CISPR22/EN55022 Class A, EN55024,
EN61000, CE Mark
Warranty
Lifetime
See Also:
Point System™ Slide-In-Module Gigabit
Ethernet Media Converters
page 52
< 104 >
Visit our website at www.transition.com
Ordering Info
SGETF1013-110
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-SX 850nm MM (SC)
[62.5/125µm fiber: 220 m/722 ft.]
Link Budget: 7.0 dB
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
SGETF1029-112
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
SGETF1029-113
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
SGETF1024-110
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-SX 1300nm Extended MM
(62.5/125 µm fiber only) (SC)
SGETF1029-116
[2 km /1.2 miles] Link Budget: 7.0 dB
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1510nm TX / 1590nm
SGETF1039-110
RX single fiber SM (SC)
1000BASE-T (RJ-45) [100 m/328 ft.]
[80 km/49.6 mi.] Link Budget: 24.0 dB
to 1000BASE-SX 850nm MM (LC)
(via TN-SFP-SX)
SGETF1029-117
[62.5/125µm fiber: 220 m/722 ft.]
1000BASE-T (RJ-45) [100 m/328 ft.]
Link Budget: 8.0 dB
to 1000BASE-LX 1590nm TX / 1510nm
[50/125µm fiber: 550 m / 1804 ft.]
RX single fiber SM (SC)
Link Budget: 8.0 dB
[80 km/49.6 mi.] Link Budget: 24.0 dB
SGETF1014-110
1000BASE-T (RJ-45) [100 m/328 ft.]
Optional Accessories
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB (sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SGETF1015-110
SPS-1872-PS (see page 72)
1000BASE-T (RJ-45) [100 m/328 ft.] Piggy Back Power Supply
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB SPS-1872-SA (see page 72)
Stand-Alone Power Supply
SGETF1017-110
1000BASE-T (RJ-45) [100 m/328 ft.] Mounting Options:
E-MCR-04 (see page 70)
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 20.0 dB 12-slot Media Converter Rack
SGETF1035-110
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1550nm SM (SC)
[125 km/77.7 mi.] Link Budget: 27.0 dB
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
SGETF1040-110
1000BASE-T (RJ-45) [100 m/328 ft.]
to SFP slot (empty)
WMBD-F (see page 70)
DIN Rail Bracket (flat, small) 3.1" [79 mm]
Single Fiber Products
Recommended use in pairs (see next
pages)
SGETF1029-110
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
SGETF1029-111
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
Gigabit Ethernet Just Convert-IT™ 1000BASE-T to 1000BASE-SX/LX
stand-alone
media converter
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
J/GE-CF-01(xxx)
Gigabit Ethernet Media Converter
gigabit ethernet
Table of Contents
Select Media Converter
Select Switch
Convert 1000BASE-T ports over to
1000BASE-SX/LX on a port-by-port
basis. Used individually or in pairs,
this media converter can extend
Gigabit Ethernet up to 2 km over
multimode fiber or up to 65 km over
single mode fiber.
Extend Network Distance
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
J/GE-CF-01(SX)
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-SX 850nm MM (SC)
220 m / 722 ft.] Link Budget: 7.0 dB
550 m / 1804 ft.] Link Budget: 7.0 dB
The Just Convert-It™ 1000BASE-T to
1000BASE-SX/LX Media converter is
an inexpensive, no frills way to extend
the distance between Gigabit Ethernet
connections with the use of fiber optic
cable, while maintaining the same
quality and reliability found on
Transition's full-featured line of
products.
J/GE-CF-01(LX1)
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 10.5 dB
J/GE-CF-01(LX2)
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB
Features
Auto-Negotiation
AutoCross™
J/GE-CF-01(LX6)
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 21.0 dB
(see page 14)
(see page 14)
Automatic Link Restoration
(see page 16)
Specifications
See pages 171–181 for complete fiber optic connector specs.
Call us at 800-526-9267 or 952-941-7600
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
Standards
IEEE Std. 802.3™ 2000
Status LEDs
PWR (Power):
Lit for normal operation
FLNK (Fiber Link): ON = fiber link
LACT (Link/Activity):
ON = Copper link
Flashing = Activity on copper link
DPX/COLL (Duplex/Collision):
ON = Copper link Full-duplex
OFF = Copper link Half-duplex;
Flashing = Collisions on Half-duplex
copper link
Dimensions
Width: 3.0" [76 mm]
Depth: 4.0" [102 mm]
Height: 1.0" [25 mm]
Power
External AC/DC included:
12 VDC, 0.4 A, unregulated
Power Consumption
3.2 watts
Environment
0 – 50°C operating, 5% – 95%
humidity non-condensing,
0 – 10,000 feet altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance
EN55024, CISPR22/EN55022
Class A, FCC Class A, CE Mark
Warranty
Lifetime
J/GE-CF-01(LX101)
1000BASE-T (RJ-45) [100 m/328 ft.]
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
*62.5/125µm fiber: 220 m / 722 ft.
50/125µm fiber: 550 m / 1804 ft.
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-CC (see page 72)
Piggy Back Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-FS (see page 70)
DIN Rail Bracket (flat, small) 3.1" [79 mm]
WMBS (see page 70)
Wall Mount Bracket 3.2" [81 mm]
< 105 >
Gigabit Ethernet/Fibre Channel Optical Mode Conversion 1000BASE-SX to 1000BASE-LX
stand-alone
media converter
Gigabit Ethernet/Fibre Channel Optical Mode Converter
Link Pass Through (see page 15)
Automatic Link Restoration
(see page 16)
Protocol Transparency
SFMFF1xxx-22x
Table of Contents
Select Media Converter
Select Switch
Ideal for campus area networks or
other applications requiring the
distance advantages of single mode
fiber.
Convert 1000BASE-SX ports on a
Gigabit Ethernet switch to 1000BASELX on a port-by-port basis.
Extend Network Distance
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
Used individually or in
pairs, this media converter
can extend 1000Mbps
Gigabit Ethernet or Fibre
Channel signals over single
mode fiber up to 125 km.
SFMFF1313-220
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget 7.5 dB
to 1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget 7.5 dB
SFMFF1324-220
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget 7.0 dB
to 1000BASE-LX 1310nm Extended MM
(62.5/125µm fiber only) (SC)
[up to 2 km] Link Budget: 7.0 dB
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3—2000™
Status LEDs
PWR (Power): Steady green LED indicates connection to external
AC power
LKS (Single mode fiber link): Steady LED indicates single mode
fiber link
LKM (Multimode fiber link): Steady LED indicates multimode fiber
link
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [120 mm]
Height: 1.0" [25 mm]
Power
External AC/DC required; 12V DC, 0.5A; unregulated; standard
Environment
0 – 50° C operating; 5% – 90% humidity non-condensing;
0 – 10,000 feet altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL and C-UL Listed (Canada)
Regulatory Compliance
FCC & CISPR Class A & B; CE Mark
Warranty
Lifetime
SFMFF1424-220
1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
to 1000BASE-LX 1310nm Extended MM
(62.5/125µm fiber only) (SC)
[up to 2 km] Link Budget: 7.0 dB
SFMFF1314-220
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
SFMFF1414-220
1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
SFMFF1315-220
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB
SFMFF1317-220
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 20.0 dB
SFMFF1335-220
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1550nm SM (SC)
[125 km/77.7 mi.] Link Budget: 27.0 dB
See Also:
Point System™ Slide-In-Module Gigabit
Ethernet/Fibre Channel Media Converters
page 53
< 106 >
Visit our website at www.transition.com
Single Fiber Products
Recommended use in pairs (see page 17)
SFMFF1329-220
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
SFMFF1329-221
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
SFMFF1329-222
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
SFMFF1329-223
1000BASE-SX 850nm multimode (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
Link Budget: 7.0 dB
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
*62.5/125µm fiber: 220 m / 722 ft.
50/125µm fiber: 550 m / 1804 ft.
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS (see page 72)
Piggy Back Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
stand-alone
media converter
Gigabit Ethernet Optical Mode Conversion 1000BASE-SX to 1000BASE-LX with signal retiming/regeneration
Gigabit Media Converter with Signal Retiming & Regeneration
Auto-Negotiation (see page 14)
Link Pass Through (see page 15)
Pause (see page 15)
Convert 1000BASE-SX ports over to 1000BASE-LX on a
port-by-port basis. Used individually or in pairs, this
media converter can extend Gigabit Ethernet over single
mode fiber up to 125km. Or cascade two or more
converters in a link to achieve even greater distances.
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
SFMFF13xx-28x
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
Extend Network Distance
Table of Contents
Select Media Converter
Select Switch
Transition Networks' Gigabit Ethernet optical mode
converters now include signal retiming, regeneration & reamplification to maintain signal integrity and allow for
maximum network distance without signal degradation.
Distances of hundreds of kilometers are possible when
cascading two or more devices in the same link.
Specifications
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™
Status LEDs
PWR (Power):
Lit for normal operation
LKS (Single Mode Fiber Link):
ON = Fiber Link
LKM (Multimode Fiber Link):
ON = Fiber Link
ACT (Activity):
Blinking = data reception on either
fiber link
Switches
Switch 1: Fiber Auto-Negotiation
on/off
Switch 2: Link Pass Through on/off
Switch 3&4: Pause configuration
determined by combined setting
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [120 mm]
Height: 1.0" [25 mm]
Power
External AC/DC included; 12V DC,
0.5A; unregulated
Power Consumption
3.5 watts
Environment
0 – 50°C operating; 5% – 95%
humidity non-condensing;
0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance
EN55024; CISPR22/EN55022
Class A; FCC Class A; CE Mark
Warranty
Lifetime
See Also:
Point System™ Slide-In-Module Gigabit
Ethernet Optical Mode Converters
page 54
Call us at 800-526-9267 or 952-941-7600
See pages 171–181 for complete fiber optic connector specs.
SFMFF1324-280
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1310nm Extended MM
(SC) (62.5/125µm fiber only)
[up to 2 km] Link Budget: 7.0 dB
SFMFF1314-280
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
SFMFF1414-280
1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
SFMFF1315-280
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB
SFMFF1317-280
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 21.0 dB
SFMFF1335-280
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1550nm SM (SC)
[125 km/77.7 mi.] Link Budget: 27.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
SFMFF1329-280
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.5 dB
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
SFMFF1329-281
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
SFMFF1329-282
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1310nm TX / 1550nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
SFMFF1329-283
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1550nm TX / 1310nm
RX single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
SFMFF1329-286
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1510nm TX / 1590nm
RX single fiber single mode (SC)
[80 km/49.6 mi.] Link Budget: 24.0 dB
SFMFF1329-287
1000BASE-SX 850nm multimode (SC)
[220 m/722 ft.]* Link Budget: 7.0 dB
[550 m/1804 ft.]* Link Budget: 7.0 dB
to 1000BASE-LX 1590nm TX / 1510nm
RX single fiber single mode (SC)
[80 km/49.6 mi.] Link Budget: 24.0 dB
*62.5/125µm fiber: 220 m / 722 ft.
50/125µm fiber: 550 m / 1804 ft.
< 107 >
Gigabit Ethernet Media Conversion 1000BASE-T to 1000BASE-SX
stand-alone
media converter
CCH-MCMxx-xx-xxx
Plug-n-Play Universal Module System
NEW
These new Gigabit Ethernet media conversion modules offer the
highest density media converter solution on the market today and are
the result of a co-development effort between Transition Networks and
Corning Cabling Systems. Each electrical-to-optical (EO) module
includes (12) 1000Base-T RJ-45 ports on the front and (2) 12-fiber
MTP 1000Base-SX optical ports on the rear to extend transmission
reach (up to 750m on 50/125um fiber) while drastically reducing bulky
copper cabling. The modules compatibility with the Plug & Play™
Universal System, part of Corning's LANscape® Pretium™ Solution,
offer virtually seamless integration into embedded fiber infrastructure.
Features
AutoCross™ (see page 14)
Copper and Fiber Auto-Negotiation
(see page 16)
Automatic Link Restoration
(see page 16)
Link Pass Through (see page 15)
Pause
(see page 15)
Hot-Swappable
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std 802.3TM - 2005
Status LEDs
Port 1 (TP):
Port 2 (TP):
Port 4 (TP):
Port 3, 5-12 (TP):
Port 1-12 (Fiber):
ON green = TP Link
ON orange = unit is operating
over temperature range
ON green = TP Link
ON orange = No link but power is
detected
ON green = TP Link
ON orange = Fan Fault
ON green = TP Link
ON green = Fiber Link
Dimensions
Width: 1.4" [36 mm]
Depth: 6.1" [155 mm]
Height: 6.1" [155 mm]
Power Consumption
17 watts, 1.41A @ 12VDC
Maximum Packet Size
10KB
MTBF
36,063 hours [MIL-217F2]
324,255 hours [Bellcore 7]
Environment
0 – 40°C operating; -15°C – 65°C
storage; 5-95% humidity non-condensing;
0-10,000 feet altitude
Shipping Weight
2 lbs. [0.9 kg]
Compliance
EN55024; CISPR22/EN55022
Class A; FCC Class A; CE Mark; UL60950
Warranty
Lifetime
< 108 >
Visit our website at www.transition.com
Ordering Info
See pages 171–181 for complete
fiber optic connector specs.
CCH-MCM12-RJ-70S
(12) 1000BASE-T (RJ-45) to
(12) 1000BASE-SX
850nm Multimode MTP (2)
[50/125um fiber: 750 m/2460 ft.]
[62.5/125um fiber: 350 m/1148 ft.]
Link Budget: 8.5 dB
Table of Contents
Select Media Converter
Select Switch
stand-alone
media converter
Table of Contents
Select Media Converter
Select Switch
Optical Line Converter with SFP Slots
Universal platform to
accommodate any optical
conversion options available via
SFP interfaces.
These converters offer an
excellent upgrade path for
networks. Today’s Fast Ethernet
applications can be upgraded to
Gigabit speeds tomorrow with a
simple SFP swap. The converter
remains installed, managed and
fully operational at any of these
speeds.
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
SFMFF4040-100
Small Form Factor Pluggable Conversion
gigabit ethernet
(2) SFP Slots for SFP interfaces
Protocol Transparency
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
Enterprise Application
Ordering Info
SFMFF4040-100
SFP Slot (empty) to SFP Slot (empty)
See Pages 135 & 136 for Compatible SFP
Modules.
Service Provider Application
Optional Accessories
Two SFP module slots allow for
seamless connectivity between
different wavelengths or fiber
modes for speeds up to 1Gbps.
Protocol independence allows for
use in broad range of applications
including Fast and Gigabit
Ethernet, FDDI, ESCON, SONET
OC-3, OC-12, OC-48 and Fibre
Channel.
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS or SPS-1872-SA
(see page 72)
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
WMBD (see page 70)
DIN Rail Mount Bracket 5.0" [127 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0” [102 mm]
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
Specifications
Standards
Multi-Source Agreement (MSA), Small
Form Factor Pluggable (SFP)
Status LEDs
LK1: Link on Port 1
LK2: Link on Port 2
PWR: Power
Dimensions
Width: 3.25" [83 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
with SFP modules installed.
Automatic Link Restoration (see page 16)
Power Consumption
2 watts with TN-SFP-xx modules
installed
Power
External AC/DC required: 12 VDC 0.5A
Optical Intrusion Detection
Environment
SFMFF4040-100 Board:
-10 – 60°C operating temp;
See SFP Module temperature ratings;
5% to 95% humidity
(non-condensing); 0 – 10,000 feet
Safety Compliance
Wall Mount Power Supply:
UL listed and CSA certified
Regulatory Compliance
FCC Class A; EN55024 (CISPR 22)
Class A; ICES-003; CISPRB;
CE Mark
Warranty
Lifetime
Features
CWDM and DWDM SFP-ready platform
Link Pass Through (see page 15)
Preconfigured bundles
Monitor the physical layer of optical networks for
signal strength degradation. The user can specify the
threshold for sudden signal strength deterioration.
Such a change often indicates a physical intrusion or
fiber damage.
See Also:
Point System™ Slide-In-Module Optical Line
Converters
page 56
Call us at 800-526-9267 or 952-941-7600
< 109 >
STM-1/OC-3 Media Conversion STM Electrical to OC-3 Fiber
stand-alone
media converter
SSTM1EOxx
SFP-based Converter Module
NEW
Transition Networks SFP-based STM1E/OC-3 media converter module
now makes the migration between electrical and optical STM-1
interfaces easier than ever. Offered as a master bundle with SFPs
already installed, these media converters offer ultimate flexibility by
providing protocol-independent, Multi-Source Agreement (MSA)
compliant SFP slots allowing each slot to be used for either electrical
or optical interfaces.
Features
Link Pass Through
(see page 15)
Automatic Link Restoration
(see page 15)
Industry standard MSA
compliant SFP ports
STM-1Electrical interface at 155Mbps
compatible with G.703, ES1, CMI
encoded signal
Jitter specification according ITU-T
G.825 and ETSI EN 300 462-4-1
Pre-configured master bundles with
SFPs installed
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
ITU-T; G.825, G.703, ES1, CMI
ETSI EN 300 462-4-1,
SONET OC-3/SDH STM-1 (S-1.1)
MSA Multi-Source Agreement
SFP Small Form Factor Pluggable
Status LEDs
PWR(Power): Lit for normal operation
LK1: on = Link on Port 1
LK2: on = Link on Port 2
Dimensions
Width: 3.25" [83 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Power Consumption
2.0 watts with TN-SFP-xx modules installed
Power
External AC/DC required; 12 VDC; 0.5A included
Environment
-10 – 60°C operating Converter; 0 – 70°C operating
TN-SFP-OCx; -40 – 85°C operating TN-SFP-STM1E;
5-95% humidity non-condensing; 0-10,000 feet altitude
Ordering Info
See pages 171–181 for complete
fiber optic connector specs.
SSTM1EOM
(1) SFMFF4040-100 (media converter)
with installed:
(1) TN-SFP-STM1E
STM-1E SFP (mini-BNC)
(1) TN-SFP-OC3M
OC-3 SFP 1300nm multimode LC
[2 km/1.2 mi.] Link Budget: 11.0 dB
SSTM1EOS
(1) SFMFF4040-100 (media converter)
with installed:
(1) TN-SFP-STM1E
STM-1E SFP (mini-BNC)
(1) TN-SFP-OC3S
OC-3 SFP 1310nm single mode LC
[20 km/12.4 mi.] Link Budget: 17.0 dB
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS or SPS-1872-SA
(see page 72)
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
WMBD (see page 70)
DIN Rail Mount Bracket 5.0" [127 mm]
Shipping Weight
1 lbs. [0.45 kg]
Safety Compliance
Wall Mount Power Supply: UL Listed and CSA certified
WMBL (see page 70)
Wall Mount Bracket 4.0” [102 mm]
Regulatory Compliance
EN55024; CISPR22/EN55022
Class A; FCC Class A; CE Mark
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
Warranty
Lifetime
< 110 >
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
OC12 ATM/Sonet/SDH Single Mode to Multimode Fiber
stand-alone
media converter
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
F-SM-MM-06(xx) & SFMFF131x-21x
Single Mode to Multimode Media Converter
Link Pass Through (see page 15)
Automatic Link Restoration (see page 16)
Protocol Transparency
Extend Network Distance
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
Extend Network Distance
Convert multimode 622 Mbps interfaces to single mode
fiber on a port-by-port basis and extend ATM or SONET
over single mode fiber up to 60 km.
Table of Contents
Select Media Converter
Select Switch
Use this converter to extend the reach of an ATM switch
with a multimode port up to 60 km across single mode
fiber.
Reduce the cost of an ATM/SONET deployment by
purchasing ATM/SONET devices with lower cost
multimode fiber interfaces and use a media converter to
introduce single mode fiber ports only where you need
them.
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
ANSI T1.646, ITU G.957
Status LEDs
Power: Lit for normal operation
MMF: Lit for active
SMF: Lit for active
Dimensions
Width: 3.0" [76 mm]
Depth: 4.7" [119 mm]
Height: 1.0" [25 mm]
Power
External AC/DC required; 12V DC.
.5A; unregulated; standard
Power Consumption
3.1 watts
Environment
0 – 50°C, 5% – 90% humidity (noncondensing), 0 – 10,000 feet
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance
CE Mark
F-SM-MM-06: CISPR/EN55022 Class
A; FCC Class A
SFMFF131x-21x: CISPR/EN55022
Class A&B; FCC Class A&B
Warranty
Lifetime
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
F-SM-MM-06
622 Mbps fiber optic 1300nm MM (SC)
[2 km/1.2 miles] Link Budget: 7.0 dB
to 622 Mbps fiber optic 1310nm SM (SC)
[15 km/9.3 mi.] Link Budget: 13.0 dB
F-SM-MM-06(XL)
622 Mbps fiber optic 1300nm MM (SC)
[2 km/1.2 miles] Link Budget: 7.0 dB
to 622 Mbps fiber optic 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
SFMFF1314-210
622 Mbps fiber optic 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 7.0 dB
to 622 Mbps fiber optic 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 11.0 dB
SFMFF1316-210
622 Mbps fiber optic 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 7.0 dB
to 622 Mbps fiber optic 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
SFMFF1317-210
622 Mbps fiber optic 1300nm MM (SC)
[2 km/1.2 miles] Link Budget: 7.0 dB
to 622 Mbps 1550nm SM (SC)
[60 km/37.3 mi.] Link Budget: 25.0 dB
SFMFF1329-210
622 Mbps fiber optic 1300nm MM (SC)
[2 km/1.2 miles] Link Budget: 7.0 dB
to 622 Mbps 1310nm TX / 1550nm RX
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
See Also:
OC12 ATM/SONET/SDH
Point System™ Slide-In-Module Media Converters
page 57
Call us at 800-526-9267 or 952-941-7600
SFMFF1329-211
622 Mbps fiber optic 1300nm MM (SC)
[2 km/1.2 miles] Link Budget: 7.0 dB
to 622 Mbps 1550nm TX / 1310nm RX
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
Optional Accessories
(sold separately)
F-SM-MM-06(xx) or SFMFF131x-21x:
SPS-1872-SA (see page 72)
Wide Input (18 – 72VDC) Stand-Alone
Power Supply
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
F-SM-MM-06(xx):
SPS-1872-CC (see page 72)
Wide Input (18 – 72VDC) Piggy Back Power
Supply
WMBD-FS (see page 70)
DIN Rail Bracket (flat, small) 3.1" [79 mm]
SFMFF131x-21x:
SPS-1872-PS (see page 72)
Wide Input (18 – 72VDC) Piggy Back Power
Supply
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [109 mm]
< 111 >
stand-alone
media converter
Table of Contents
Select Media Converter
Select Switch
DS3-T3/E3 Coax to Fiber
SCSCF30xx-10x
DS3-T3/E3 Coax to Fiber Media Converter
Extend a DS3 or E3 over fiber
The DS3-T3/E3 copper to fiber
media converter will provide a
solution for those users that
desire to extend the point of
presence of their DS3 or E3
Connection or use it to connect
remote locations via T3/E3.
Integrate Voice & Data on Fiber Network
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
SCSCF3011-100
(2) Coax (BNC)
to 1300nm multimode (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
Upgrade from Multiple T1
Features
SCSCF3013-100
(2) Coax (BNC)
to 1300nm multimode (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
AIS (Alarm Indication Signal) All
1’s or Blue detected on both ports.
(unframed)
AIS generated in both directions
SCSCF3018-100
(2) Coax (BNC)
to 1300nm multimode (MT-RJ)
[2 km / 1.2 mi.] Link Budget: 14.5 dB
selectable Blue or 1’s.
Digital Loopback on fiber & copper
ports
Coax Line build out for operation
less than 255 feet or 255 feet to 1000
feet.
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
ANSI, ITU-TS, AT&T, ETSI, G.703,
G.921 and G.956
Switches
SW1: DS3/E3 selector: On for E3
SW2: Coax Line build out: On for less
than 255 feet of cable
SW3: AIS (unframed) transmit: On for
transmit AIS if receive loss of carrier
SW4: AIS Blue/AIS All 1’s: On for Blue
alarm
Front Switch: Right/Left – loop-back
fiber/copper, Center – Normal
Switch selectable DS3/T3 or E3 rate
LED indications for all operation modes
Supports fractional/channelized DS3/E3
STS-1 optional
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS (see page 72)
Piggy Back Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Jumpers
Status LEDs
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
See Also:
DS3-T3/E3 Point System™ Slide-In-Module
Media Converters
page 58
< 112 >
Visit our website at www.transition.com
Jumper (J11): Connect output coax
port to chassis ground (per G.703)
Jumper (J12): Connect input coax
port to chassis ground (per G.703)
PWR (Power): On for normal
operation
SDC Copper: Green – Link is up;
Green Flashing – Coax is in loop-back
mode; Yellow – AIS (unframed)
detected.
SDF Fiber: Green – Link is up; Green
Flashing – Fiber is in loop-back mode;
Yellow – AIS (unframed) detected.
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Power Consumption
6 watts max.
Power
External AC/DC required; 12V DC, .8A;
unregulated; standard
Environment
0 – 50°C, 5% – 90% humidity (noncondensing), 0 – 10,000 feet
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance
CISPR/EN55022 Class A; FCC Class A;
CE Mark
Warranty
Lifetime
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
SCSCF3014-100
(2) Coax (BNC)
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
SCSCF3015-100
(2) Coax (BNC)
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
SCSCF3016-100
(2) Coax (BNC)
to 1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
SCSCF3017-100
(2) Coax (BNC)
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
SCSCF3029-100
(2) Coax (BNC)
to 1310nm TX / 1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SCSCF3029-101
(2) Coax (BNC)
to 1550nm TX / 1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SCSCF3029-102
(2) Coax (BNC)
to 1310nm TX / 1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
SCSCF3029-103
(2) Coax (BNC)
to 1550nm TX / 1310nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
High Speed Serial: V.35/X.21/RS449/RS530/RS232 with Remote In-Band Management
stand-alone
media converter
Remotely Managed High Speed Serial Media Converter
SPSVT26xx-10x
Table of Contents
Select Media Converter
Select Switch
Connect High Speed Serial signals on copper to fiber
Supports multiple protocols through the use of a universal 26-pin
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
serial interface connector.
Extend the point of presence of a copper V.35 / X.21 / RS449 /
rs232
rs422/485
t1/e1
pots 2-wire
video
industrial
RS530 / RS232 connection at data rates up to 10 Mbps.
Selectable DCE speeds
Features
In-band remote management when
used in conjunction with Point System™
card
Operational speeds up to 10Mbps
Copper & Fiber Loopback
Synchronous or asynchronous
capability
LED indications for Lock, Loopback &
Data
Use a combination of any copper
interface: (RS449 to V.35, RS530 to
X.21, DTE-DTE, DTE-DCE, DCE-DCE,
etc.) All interfaces converted at the
physical level.
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
ITU-T; ISO-2593
Data Rate
1.2Kb/s to 10Mb/s
Switches
Side panel, external DCE speed switch, sixteen position:
• 0 – TT = Receive CLK
• 8 – 768 Kbps
• 1 – 56 Kbps
• 9 – 1.024 Mbps
• 2 – 64 Kbps
• A – 1.544 Mbps
• 3 – 112 Kbps
• B – 2.048 Mbps
• 4 – 128 Kbps
• C – 3.072 Mbps
• 5 – 256 Kbps
• D – 4.096 Mbps
• 6 – 384 Kbps
• E – 6.144 Mbps
• 7 – 512 Kbps
• F – Asynchronous Mode
Speeds can also be set on DCE converters locally or remotely
via software.
Front Panel, Loop-back Selector Switch: Right Position:
Loop Fiber Back & Loop Copper Back
Left Position: Normal Operation
Internal Jumpers
Jumper (J4): Hardware: The terminal timing switch controls
the terminal timing function. The loop-back switch controls
the loop-back function.
Software: The terminal timing switch and the loop-back
switch are disabled. These two functions are controlled by
the most recently saved, on-board microprocessor settings.
Jumper (J6): RX Clock Polarity: Set to sample the receive
data on the rising or falling edge of the receive clock.
Jumper (J7): TX Clock Polarity: Set to sample the transmit
data on the rising or falling edge of the receive clock.
Status LEDs
The Copper LED uses a green LED
Smart Serial Link: Green - Link is up;
Green Flashing - In loop-back mode;
Fiber: Green - Link is up;
Green Flashing - In loop-back mode;
Power: Green - ON power applied to board
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
SPSVT2611-100
26-pin
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SPSVT2613-100
26-pin
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SPSVT2614-100
26-pin
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
SPSVT2615-100
26-pin
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
Cable Assemblies
[cable length: 3 meters / 10 feet]
21DCE-3
DB-15 (FT) (26-pin) to (DCE) [3 m/10 ft.]
21DTE-3
DB-15 (MT) (26-pin) to (DTE) [3 m/10 ft.]
232DCE-3
DB-25 (FT) (26-pin) to (DCE) [3 m/10 ft.]
232DTE-3
DB-25 (MT) (26-pin) to(DTE) [3 m/10 ft.]
35DCE-3
V.35 (FT) (26-pin) to (DCE) [3 m/10 ft.]
35DTE-3
V.35 (MT) (26-pin) to (DTE) [3 m/10 ft.]
Single Fiber Products
Recommended use in pairs (see page 17)
35DTE-3C
V.35 (MT) (26-pin) to (DTE) [3 m/10 ft.]
SPSVT2629-100
26-pin
to 1310nm TX / 1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
449DCE-3
DB-37 (FT) (26-pin) to (DCE) [3 m/10 ft.]
SPSVT2629-101
26-pin
to 1550nm TX / 1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SPSVT2629-102
26-pin
to 1310nm TX / 1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
SPSVT2629-103
26-pin
to 1550nm TX / 1310nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
Optional Accessories
449DTE-3
DB-37 (MT) (26-pin) to (DTE) [3 m/10 ft.]
530DCE-3
DB-25 (FT) (26-pin) to (DCE) [3 m/10 ft.]
530DTE-3
DB-25 (MT) (26-pin) to (DTE) [3 m/10 ft.]
Copper Distances
Standard
Range*
RS232/V.24
15 meters
RS449/V.36
1.2 km
V.35
600 meters
X.21
1.2 km
RS530
1.2 km
*For reference only. Contact Transition
Networks for detailed range information.
(sold separately)
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [120 mm]
Height: 1.0" [25 mm]
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS (see page 72)
Piggy Back Power Supply
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
Power Consumption
5.0 watts
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
Power
External AC/DC required; 12 VDC; 1A; regulated wall mount
adapter via 2mm connector
Environment
0 – 50°C, 5% – 90% humidity (non-condensing),
0 – 10,000 feet
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply: UL Listed and CSA certified
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
Regulatory Compliance
CISPR/EN55022, EN55024, EN60950 Class A;
FCC Class A; CE Mark
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
Warranty
Lifetime
Call us at 800-526-9267 or 952-941-7600
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
< 113 >
stand-alone
media converter
RS232 Copper to Fiber with Remote Management
SRS2F311x-100
Remotely Managed RS232 Media Converter
Remote management
Local or Remote Loopback
Table of Contents
Select Media Converter
Select Switch
DTE/DCE switch for easy
installation with straight-through
cabling
on copper and fiber (see page 16)
Extend Network Distance
Extend Network Distance
Link a remote terminal to a host
computer: Connect multiple devices,
such as security scanners, POS
devices, remote terminals and
building access/alarming systems to a
host computer. Ideal for campus or
business environments where remote
devices can be networked in a pointto-point configuration where
distances are greater than the 15
meter limitation of conventional
copper serial cables.
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
SRS2F3111-100
DB-9 [15 m/49 ft.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SRS2F3113-100
DB-9 [15 m/49 ft.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Transition Networks' serial RS232 to
Fiber Media Converter allows you to
extend the distance between serial
connections with the use of fiber optic
cable. This full-featured converter
transmits the full complement of
RS232 flow control/handshaking
signals optically and supports full or
half-duplex asynchronous data
transmission at speeds up to 115Kb/s.
The diagnostic features included on this converter make
installation easy and intuitive. A DTE/DCE switch eliminates
the frustration over selecting the appropriate cable. A loopback switch allows for complete diagnostic testing prior to
system turn-up or during troubleshooting. Unit and Port
LEDs allow for quick status information of the converter.
In addition to status LEDs and switch settings for local
management, these converters can also be managed from
remote locations when used in conjunction with a managed
Point System™ chassis.
Additional Features
Full/Half-duplex asynchronous transmission at speeds
up to 115Kb/s
Supports the following flow control signaling:
1. DCD - Data Carrier Detect
2. RXD - Receive Data
3. TXD - Transmit Data
4. DTR - Data Terminal Ready
5. SG - Signal Ground
6. DSR - Data Set Ready
7. RTS - Request To Send
8. CTS - Clear To Send
See Also:
Point System™ Slide-In-Module RS232
Media Converters
page 60
< 114 >
Visit our website at www.transition.com
SRS2F3114-100
DB-9 [15 m/49 ft.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
SRS2F3115-100
DB-9 [15 m/49 ft.]
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
Optional Accessories
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
EIA/TIA-574, EIA/TIA RS-232E
Data Rate
115 Kb/s
Switches
DTE/DCE: Select appropriate position
Loopback: Norm = normal operation;
Loop = Fiber and copper loop-back
Status LEDs
P: (Power): Lit for normal operation
RX: Steady = Copper Link;
Flashing = Rx Data
FL: Steady = Fiber Link;
Flashing = Loop back mode
Dimensions
Width: 3.3" [84 mm]
Depth: 4.8" [122 mm]
Height: 1.2" [30 mm]
Power Consumption
5.0 watts
Power
External AC/DC; 12VDC, 0.5A min
Environment
0 – 50°C, 5% – 95% humidity (noncondensing), 0 – 10,000 feet
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance
CISPR22/EN55022 Class A +
EN55024; EN60950 Class A;
FCC Class A; CE Mark
Warranty
Lifetime
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS (see page 72)
Piggy Back Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
stand-alone
media converter
RS232 Just
Convert-IT™
Copper to Fiber
Table of Contents
Select Media Converter
Select Switch
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
J/RS232-xF-01(xx)
RS232 Copper to Fiber Media Converter
rs232
Link a remote terminal to a host
computer: Connect multiple devices,
such as security scanners, POS
devices, remote terminals and
building access/alarming systems to a
host computer. Ideal for campus or
business environments where remote
devices can be networked in a pointto-point configuration where
distances are greater than the 15
meter limitation of conventional
copper serial cables.
rs422/485
t1/e1
pots 2-wire
video
industrial
Extend Network Distance
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
J/RS232-CF-01
DB-9 (female) [15 m/49 ft.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
J/RS232-CF-01(SC)
DB-9 (female) [15 m/49 ft.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Transition Networks’s “Just ConvertIT™” serial RS-232 to Fiber Media
Converter is an inexpensive, no frills
way to extend the distance between
serial connections with the use of
fiber optic cable. This converter
supports full or half-duplex data
transmission at speeds up to
120Kb/s. Unit and Port LEDs allow for
quick status information on the
converter.
Features
Offered with either a male or female connector
Full/Half-duplex transmission at speeds up to 120Kb/s
Fiber LED lights to show link with or without data
transmission
Call us at 800-526-9267 or 952-941-7600
J/RS232-TF-01
DB-9 (male) [15 m/49 ft.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
J/RS232-TF-01(SC)
DB-9 (male) [15 m/49 ft.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Optional Accessories
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
EIA/TIA-574, EIA/TIA RS-232E
Status LEDs
PWR: Lit for normal operation
RX: Steady = Link;
Flashing = Rx Data
FL: Steady = Fiber Link
Dimensions
Width: 3.0" [76 mm]
Depth: 3.9" [100 mm]
Height: 1.0" [25 mm]
Power Consumption
3.0 watts
Power
External AC/DC; 12VDC, 0.5A min
Environment
0 – 50°C, 5% – 95% humidity (noncondensing), 0 – 10,000 feet
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance
CISPR22/EN55022 Class A +
EN55024; EN60950 Class A; FCC
Class A; CE Mark
Warranty
Lifetime
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS (see page 72)
Piggy Back Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-FS (see page 70)
DIN Rail Bracket (flat) 3.1" [79 mm]
WMBS (see page 70)
Wall Mount Bracket 3.2" [81 mm]
< 115 >
stand-alone
media converter
Table of Contents
Select Media Converter
Select Switch
RS422/485 Copper to Fiber
SRS4F3x1x-100
RS422/485 Copper to Fiber Media Converter
Link a remote terminal to a host
computer: Connect multiple devices,
such as security scanners, POS
devices, remote terminals and
building access/alarming systems to a
host computer. Ideal for campus or
business environments where remote
devices can be networked in either a
point-to-point or point to multi-point
configuration.
Extend Network Distance
Transition Networks's serial RS422/485 to Fiber Media Converter
allows you to extend the distance
between serial connections with the
use of fiber optic cable. This fullfeatured converter operates in 2-wire
mode for RS-422 and either 2-wire or
4-wire mode for RS-485 and supports
full or half-duplex data transmission
at speeds up to 1.25 Mb/s.
Connect Multiple Devices
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
SRS4F3111-100
DB-9 [1.2 km/0.7 mi.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SRS4F3113-100
DB-9 [1.2 km/0.7 mi.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SRS4F3114-100
DB-9 [1.2 km/0.7 mi.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
EIA/TIA RS-422, EIA/TIA RS-485
Switches
SW1: 130 ohm resistor Rx
(Down = enable)
SW2: 130 ohm resistor Tx
(Down = enable)
SW3: 1k ohm "pull-down"
(Down = enable)
SW4: 1k ohm "pull-up"
(Down = enable)
SW5: 2-wire / 4-wire
(Down = 4-wire)
SW6: RS-485 / RS-422
(Down = RS-422)
Features
RS422 or RS485 operation
2-wire or 4-wire in operation in RS-485 mode
Full/Half-duplex transmission at speeds up to
1.25 Mb/s
Status LEDs
PWR: Power: Lit for normal operation
RXC: Steady = Data Rx on copper link;
Flashing = Rx Data at low speed
RXF: Steady = Fiber Link
Dimensions
Width: 3.3" [84 mm]
Depth: 4.8" [122 mm]
Height: 0.90" [22 mm]
Power Consumption
5.0 watts
Power
External AC/DC; 12VDC, 0.5A min
Environment
0 – 50°C operating; 5 – 95% humidity
non-condensing;
0 – 10,000 feet altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance
CISPR22/EN55022; EN55024;
EN60950 Class A; FCC Class A;
CE Mark; UL 1950
Warranty
Lifetime
SRS4F3115-100
DB-9 [1.2 km/0.7 mi.]
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
SRS4F3116-100
DB-9 [1.2 km/0.7 mi.]
to 1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
SRS4F3211-100
Terminal Block [1.2 km/0.7 mi.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SRS4F3213-100
Terminal Block [1.2 km/0.7 mi.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SRS4F3214-100
Terminal Block [1.2 km/0.7 mi.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
SRS4F3215-100
Terminal Block [1.2 km/0.7 mi.]
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS (see page 72)
Piggy Back Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Mounting Options:
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
See Also:
Point System™ Slide-In-Module
RS422/485 Media Converters
page 61
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket
5.0" [127 mm]
< 116 >
Visit our website at www.transition.com
stand-alone
media converter
T1/E1 Copper to Fiber with Remote In-Band Management
Remotely Managed T1/E1 Media Converter
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
SSDTFx0xx-1xx
Table of Contents
Select Media Converter
Select Switch
Remote management in a stand-alone device. When used in conjunction
with a managed Point System™ chassis, this stand-alone unit can be
managed remotely.
The Remotely Managed T1/E1 copper to fiber media converter will provide a
solution for users who desire to extend their T1 or E1 circuits over fiber and
remotely manage them “in-band” from admin locations.
rs422/485
t1/e1
pots 2-wire
video
industrial
Features
Provide Campus Interconnects
With the exception of
Ethernet, T1/E1 is one of
the most common
campus/ metropolitan
area networking
interconnects. A copper to
fiber conversion on the
premise side of the T1/E1
makes it easier to
integrate voice traffic,
frame relay or IP type
traffic on your fiber
network.
Remote Management
Stand-alone can be
managed remotely when
used with a managed
chassis.
Remote unit in-band management (see page 15)
Local or Remote Loopbacks on copper or fiber in software mode
(see page 16)
Loopback
switch facilitates local installation
Converts the copper ports on T1/E1 devices, such as a PBX or
T1/E1 Router, to multimode or single mode fiber
Switch selectable RJ-48 connectors for T1 or E1
Jitter attenuators optimize Bit Error Rate (BER) performance
Network debug procedures make BER testing more convenient
Built-in troubleshooting with the addition of a
selectable TAOS (Transmit All Ones) switch on the fiber and copper
interfaces allows the network engineer to test all T1/E1 equipment on
that network segment and ensure the network link.
Dry Relay Contacts enable the media converter to be tied into a
separate alarm circuit commonly found in a T1/E1 twisted pair
environment. Contacts will be activated on loss of power or loss of
fiber link.
LED provides Alarm Indication Signal (AIS)
Can be used with fractional T1/E1 circuits
Report converter status
• Copper & Fiber Link status
• Hardware switch settings: LBO, AIS Copper, AIS Fiber, HW/SW
• AIS detected Copper & Fiber
• Model Number
• Copper & Fiber Connector
Extend T1 Networks
Extend T1 to other
buildings in a campus or
MAN from 2 km to 80 km
for voice or data
applications.
Remote commands:
• Loopback Copper & Fiber
• AIS transmitted on Fiber on loss of Copper link
• AIS Transmitted on Copper on loss of Fiber link
See next page for Ordering Info
See Also:
T1/E1 Point System™ Slide-In-Module
Media Converters
page 62-63
Call us at 800-526-9267 or 952-941-7600
< 117 >
stand-alone
media converter
T1/E1 Copper to Fiber with Remote In-Band Management
Table of Contents
Select Media Converter
Select Switch
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
ITU-T, ANSI, AT&T, ETSI
Switches
SW1: 1, 2, 3: Line Build out for short
haul/DB in Long Haul (see table)
Short Haul mode:
SW1: Pos 4 not used
SW2 - 1: Transmit all ones into
copper on loss of fiber link (Up =
Disabled)
SW2 - 2: Transmit all ones (AIS) into
fiber on loss of copper link (Up =
Disabled)
SW2 - 3: Long Haul/Short Haul
(Up = Short Haul)
SW2 - 4: T1/E1 selection (Up = T1)
See pages 171–181 for complete fiber optic connector specs.
SSDTF1011-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 850nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 13.5 dB
SSDTF3011-115
(2) Coax (BNC) [100 m / 328 ft.]
850nm multimode (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SSDTF1013-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 850nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 13.5 dB
SSDTF3013-115
(2) Coax (BNC) [100 m / 328 ft.]
850nm multimode (SC)
[2 km / 1.2 mi.] Link Budget: 13.5 dB
SSDTF1018-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1300nm multimode (MT-RJ)
[2 km/1.2 mi.] Link Budget: 14.5 dB
SSDTF3018-115
(2) Coax (BNC) [100 m / 328 ft.]
1300nm multimode (MT-RJ)
[2 km / 1.2 mi.] Link Budget: 14.5 dB
SSDTF1027-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1300nm multimode (ST)
[5 km / 3.1 mi.] Link Budget: 13.5 dB
SSDTF3027-115
(2) Coax (BNC) [100 m / 328 ft.]
1300nm multimode (ST)
[5 km / 3.1 mi.] Link Budget: 13.5 dB
SSDTF1012-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
1310nm single mode (ST)
[8 km / 5 mi.] Link Budget: 7.0 dB
SSDTF3012-115
(2) Coax (BNC) [100 m / 328 ft.]
1310nm single mode (ST)
[8 km / 5 mi.] Link Budget: 7.0 dB
SSDTF1022-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1310nm single mode (ST)
[15 km / 9.3 mi.] Link Budget: 10.0 dB
SSDTF3022-115
(2) Coax (BNC) [100 m / 328 ft.]
1310nm single mode (ST)
[15 km / 9.3 mi.] Link Budget: 10.0 dB
SSDTF1014-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
SSDTF3014-115
(2) Coax (BNC) [100 m / 328 ft.]
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
SSDTF1015-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 30.0 dB
SSDTF3015-115
(2) Coax (BNC) [100 m / 328 ft.]
1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 30.0 dB
Optional Accessories
SSDTF1016-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 33.0 dB
SSDTF3016-115
(2) Coax (BNC) [100 m / 328 ft.]
to 1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 33.0 dB
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS (see page 72)
Piggy Back Power Supply
SSDTF1017-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
SSDTF3017-115
(2) Coax (BNC) [100 m / 328 ft.]
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Single Fiber Products
Recommended use in pairs (see page 17)
Single Fiber Products
Recommended use in pairs (see page 17)
Mounting Options:
SSDTF1029-105
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1310nm TX / 1550nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SSDTF3029-115
(2) Coax (BNC) [100 m / 328 ft.]
to 1310nm TX / 1550nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SSDTF1029-106
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1550nm TX / 1310nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SSDTF3029-116
(2) Coax (BNC) [100 m / 328 ft.]
to 1550nm TX / 1310nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
SSDTF1029-107
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1310nm TX / 1550nm RX single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
SSDTF3029-117
(2) Coax (BNC) [100 m / 328 ft.]
to 1310nm TX / 1550nm RX single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
SSDTF1029-108
Twisted Pair (RJ-48) [1.5 km/0.9 mi.]
to 1550nm TX / 1310nm RX single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
SSDTF3029-118
(2) Coax (BNC) [100 m / 328 ft.]
to 1550nm TX / 1310nm RX single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
3-position Jumper
Status LEDs
Hardware: Converter mode is
determined by 4-position switch
settings
Software: Converter mode is
determined by most recently saved
on-board microprocessor settings.
PWR (Power): Steady green LED
indicates connection to external AC
power
SDC (Signal Detect/Copper): On
indicates twisted pair link is up
SDF (Signal Detect/Fiber): On
indicates fiber link is up
Dimensions
Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Power
External AC/DC provided; 12V DC;
0.5A; unregulated; standard;
UL listed
Environment
0 – 50°C, 5% – 95% humidity (noncondensing), 0 – 10,000 feet
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
CSA certified
Regulatory Compliance
CISPR/EN55022 Class A;
FCC Class A; CE Mark
Warranty
Lifetime
E-MCR-04 (see page 70)
12-slot Media Converter Rack
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
< 118 >
Ordering Info
Visit our website at www.transition.com
4X T1/E1/J1 to Fiber Transport Mux
stand-alone
media converter
S4TEF10xx-10x
4x T1/E1/J1 Copper to Fiber Media Converter
Low cost transport capability: (4) T1/E1/J1 and (1) RS232 data channel line
Target applications of the converter include: FTTx, such as Fiber-to-the-Business, Fiberto-the-Building, Fiber-to-the-MDU and Fiber-to-the-Home.
Automatic Link Restoration (see page 16)
Remote Management (see page 15)
Table of Contents
Select Media Converter
Select Switch
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
The product provides physical layer status monitoring and alarm classification functions for
Telecom operators to manage their fiber optic network and reduce operation and
maintenance costs.
pots 2-wire
video
industrial
Application
Copper connections are compatible with G.703 and AMI/B8ZS/HDB3; while the optical
connection will run at 155Mbps. A hardware-based solution guarantees the constant bit rate
of TDM transport without requiring traffic management.
Features
Local and Remote Loopback
(see page 16)
AIS/TAOS
LEDs for each data port
DIP switches for line code, line length,
local loopback or remote loopback
T1/E1/J1 mode settings
Dry Relay Contacts on each TDM port
Local (AUX) Management Interface
(RS232 connector)
Switch selection for Data or Management
mode on RS232 interface
Access to complete status information
on local and remote device
Access to local and remote configuration
Switch or SNMP selected Baud rate
operation
Remote Firmware Upgrade (see page 16)
Specifications
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
See pages 171–181 for complete fiber optic connector specs.
Note: RS-232 cable included with each unit (6-pin DIN to DB-9)
Standards
Switches
Dimensions
AMI/B8ZS/HDB3; G.703
Telecordia TR-NWT-001089: FCC
Part 68, UL1459; ITU-T, ANSI, AT&T,
ETSI; TBR 12; PD 7024: 1994
(NTR 4)
Numerous switch settings for line
coding, line buildout, loopback (per
port), AIS setting, data/mgmt
RS-232 and RS-232 port speed and
parity
Width: 3.7" [94 mm]
Depth: 4.7" [119 mm]
Height: 1.8" [46 mm]
Power
External AC/DC provided; 12VDC,
1.25A; unregulated; standard;
UL Listed
Power Consumption
6.0 watts
Operating Temperature
0 – 50°C
Storage Temperature
-40 to +85°C
Altitude
0 – 10,000 ft.
Operating Humidity
5% – 95% (non-condensing
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL listed and CSA certified
Regulatory Compliance
FCC Class A, VCCI Class A,
CISPR/EN55022 Class A,
ICES-003, CE Mark
Warranty
Lifetime
See Also:
4x T1 Transport Mux
Point System™ Slide-In-Module Media
Converters
page 64
S4TEF1011-100
1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1013-100
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1014-100
1310nm single mode (SC)
[20 km/12.4 mi.]
Link Budget: 16.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1015-100
1310nm single mode (SC)
[40 km/24.9 mi.]
Link Budget: 26.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1016-100
1310nm single mode (SC)
[60 km/37.3 mi.]
Link Budget: 29.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1017-100
1550nm single mode (SC)
[80 km/49.7 mi.]
Link Budget: 29.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1035-100
1550nm single mode (SC)
[120 km/74.6 mi.]
Link Budget: 36.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
Single Fiber Products
Recommended use in pairs (see page 17)
S4TEF1029-100
1310nm TX/1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1029-101
1550nm TX / 1310nm RX single
fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1029-102
1310nm TX / 1550nm RX single
fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1029-103
1550nm TX / 1310nm RX single
fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 6-pin DIN [3 m / 10 ft.]
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Mounting Options:
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
Call us at 800-526-9267 or 952-941-7600
< 119 >
stand-alone
media converter
4X T1/E1/J1 + 10/100 Ethernet to Fiber Transport Mux
4x T1/E1/J1 + 10/100 Ethernet Transport Mux
Low cost transport capability:
(4) T1/E1/J1; (1) Ethernet and (1)
RS232 data channel line
Target applications include: FTTx,
such as Fiber-to-the-Business, Fiberto-the-Building, Fiber-to-the-MDU and
Fiber-to-the-Home.
These products offer a low cost
transport capability for four T1/E1/J1,
one Ethernet and one data channel
line (x4TEF10XX-11X). The offering
will provide copper connections
compatible with G.703,
AMI/B8ZS/HDB3, 10/100BASE-TX, as
well as RS232 channel; while the
optical connection will run at
155Mbps. TDM traffic is not mapped
to Ethernet. A hardware-based
solution guarantees the constant bit
rate of TDM transport without
requiring traffic management. The
product provides physical layer status
monitoring, alarm classification and
data classification functions for
Telecom providers to manage their
fiber optic network and reduce
operation and maintenance costs.
Target applications of the converter
include: FTTx, such as Fiber-to-theBusiness, Fiber-to-the-Building, Fiber
to-the-MDU and Fiber-to-the-Home.
Features
Auto-Negotiation for
10/100BASE-TX
(see page 14)
AutoCross™ (auto MDI/MDI-X)
(see page 14)
Transparent Link Pass Through for
Ethernet (see page 15)
Automatic Link Restoration
(see page 16)
Pause (Flow Control) (see page 15)
Remote Management (see page 15)
Local and Remote Loopback
(see page 16)
Remote Fiber Loss Signaling
AIS/TAOS
LEDs for each data port
DIP switches for line code, line
length, local loopback or remote
loopback
T1/E1/J1 mode settings
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™ 2003; Telecordia TR-NWT-001089: FCC
Part 68, UL1459; ITU-T, ANSI, AT&T, ETSI; TBR 12; PD
7024: 1994 (NTR 4); AMI/B8ZS/HDB3; G.703
Switches
Numerous switch settings for line coding, line buildout,
loopback (per port), AIS setting, data/mgmt
RS-232 and RS-232 port speed and parity
Ethernet port settings
Auto-Negotiation, Force speed/duplex and enable
Transparent Link Pass Through
Dimensions
Width: 3.7" [94 mm]
Depth: 4.7" [119 mm]
Height: 1.8" [46 mm]
Power
External AC/DC provided; 12VDC, 1.25A; unregulated;
standard; UL listed
Power Consumption
6.0 watts
Operating Temperature
0 – 50°C
Storage Temperature
-40 to +85°C
Altitude
0 – 10,000 ft.
Operating Humidity
5% – 95% (non-condensing)
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL listed, and CSA certified
Regulatory Compliance
FCC Class A, VCCI Class A, CISPR/EN55022 Class A, ICES003, CE Mark
Warranty
Lifetime
S4TEF10xx-11x
Dry Relay Contacts on each TDM
port
Local (AUX) Management Interface
(RS232 connector)
Switch selection for Data or
Management mode on RS232
interface
Access to complete status
information on local and remote
device
Access to local and remote
configuration
Switch or SNMP selected Baud rate
operation
802.1Q VLAN Management
Remote Firmware Upgrade
(see page 16)
Visit our website at www.transition.com
Application
Ordering Info
See pages 171–181 for complete fiber optic connector specs.
Note: RS-232 cable included with each unit (6-pin DIN to DB-9)
S4TEF1011-110
1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1013-110
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1014-110
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1015-110
1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1016-110
1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1017-110
1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1035-110
1550nm single mode (SC)
[120 km/74.6 mi.] Link Budget: 36.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
< 120 >
Table of Contents
Select Media Converter
Select Switch
Single Fiber Products
Recommended use in pairs (see page 17)
S4TEF1029-110
1310nm TX/1550nm RX single fiber
SM (SC) [20 km/12.4 mi.] LB: 19.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1029-111
1550nm TX/1310nm RX single fiber
SM (SC) [20 km/12.4 mi.] LB: 19.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1029-112
1310nm TX/1550nm RX single fiber
SM (SC) [40 km/24.9 mi.] LB: 25.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
S4TEF1029-113
1550nm TX/1310nm RX single fiber
SM (SC) [40 km/24.9 mi.] LB: 25.0 dB
to
(4) RJ-48 [1.5 km / 0.9 mi.]
plus 10/100BASE-TX (RJ-45) [100 m]
plus 6-pin DIN [3 m / 10 ft.]
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
Mounting Options:
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
WMBD-F (see page 70)
DIN Rail Bracket (flat) 3.3" [84 mm]
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
WMBV (see page 70)
Vertical Wall Mount Bracket 5.0" [127 mm]
stand-alone
media converter
Table of Contents
Select Media Converter
Select Switch
POTS 2-wire Copper to Fiber
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
SAPTF33xx-1xx
POTS 2-wire Copper to Fiber Media Converter
t1/e1
pots 2-wire
Connect central-office voice grade
signals to distant Plain Old Telephone
equipment (POTS) utilizing standard
telephone signaling. Two units are
required to implement an end to end
system. Unit A connects to a
telephone line or PBX and has the
ability to detect ringing voltages and
to act as a telephone (LINE SIDE
FXS). Unit B is the reciprocal unit and
has the ability to act as a Central
Office and connects to a telephone
device (CUSTOMER SIDE FXO.
Loop Extender / Isolator
Features
Audio transmission
Caller ID
Automatic Ring Down
Duplex or single fiber options
Automatic Ring Down
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
Line Side FXS: SAPTF3311-100
Customer Side FXO: SAPTF3311-110
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
FCC Part 68, TBR21
Analog Port (Telephone Emulation or FXS)
Connector: RJ-11
Impedance: 600 ohms
REN: 0.48
Loop Current: 20 to 100 ma.
Insertion Loss: 0.0 +/-1.0 dB at 1000
Hz when both ports are terminated at
600 ohms
Analog Port (Central Office Emulation or FXO)
Impedance: 600 ohms
Battery Source: 48 VDC +/- 5V
Ringing Supply: 90Vp-p
Ring Frequency: 15 – 30 Hz.
(Reproduces frequency detected by
side A)
Ring Cadence: Reproduces cadence
detected by side A
Insertion Loss: 1.0 +/- 1.0 dB @ 1000
Hz when both ports are terminated at
600 ohms
Voice Frequency
300Hz – 3KHz
Switches/Optional Jumpers
See Also:
POTS 2-wire
Point System™ Slide-In-Module Media
Converters
page 67
video
industrial
Automatic Ring Down/Normal
Line Side FXS: SAPTF3313-100
Customer Side FXO: SAPTF3313-110
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Line Side FXS: SAPTF3314-100
Customer Side FXO: SAPTF3314-110
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Line Side FXS: SAPTF3315-100
Customer Side FXO: SAPTF3315-110
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
Line Side FXS: SAPTF3317-100
Customer Side FXO: SAPTF3317-110
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
Single Fiber Products
Recommended use in pairs (see page 17)
Line Side FXS: SAPTF3329-100
Customer Side FXO: SAPTF3329-110
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
Line Side FXS: SAPTF3329-101
Customer Side FXO: SAPTF3329-111
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
Status LEDs
LED colors are Green
Fiber Link: On indicates fiber link up;
In Use: On indicates unit in use;
Flashing indicates ringing;
Power: On indicates power is on
Dimensions
Width: 3.7" [94 mm]
Depth: 4.7" [119 mm]
Height: 1.8" [46 mm]
Power
External AC/DC provided; 12VDC,
1.25A; unregulated; standard;
UL Listed
Environment
0 – 50°C, 5% – 95% humidity (noncondensing), 0 – 10,000 feet
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance
FCC Class A; VCCI Class A;
EN 55022 (CISPR 22) Class A; ICES
003; CE Mark
Note: Single Fiber products should be
paired by application:
Warranty
Lifetime
Loop Extender/Isolator Application
Line Side FXS: CAPTF3329-100
Customer Side FXO: CAPTF3329-111
Line Side FXS: SAPTF3329-102
Customer Side FXO: SAPTF3329-112
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
Line Side FXS: SAPTF3329-103
Customer Side FXO: SAPTF33129-113
Twisted Pair (RJ-11) [5 km / 3.1 mi.]
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
Automatic Ring Down Application
Line Side FXS: CAPTF3329-102
Customer Side FXO: CAPTF3329-103
Call us at 800-526-9267 or 952-941-7600
< 121 >
stand-alone
media converter
Table of Contents
Select Media Converter
Select Switch
Analog CCTV Video: NTSC, PAL, SECAM
J/VD-xX-01
Analog CCTV Video Copper to Fiber Media Converter
Transmitter
Receiver
Connect uni-directional analog video devices over fiber
Transition Networks’s analog
composite video media transmitter,
J/VD-TX-01, converts a CCTV signal
from cameras to multimode or single
mode fiber for up to 10 km. Transition
Networks’s analog video media
receiver,
J/VD-RX-01, converts the optical
signal back to an analog composite
video signal. All conversion is
performed in real time. Automatic
gain control installed on both Transmitter and Receiver
maintains desired quality of video’s contrast and brightness
for extended distances. No field adjustments are necessary.
Wide input range power supply allows for multiple choices
of power source including camera power supply.
Ordering Info
J/VD-TX-01: Video Transmitter
BNC (75 ohm)
to Multimode (ST)
[1 km/ 0.6 miles]
J/VD-RX-01: Video Receiver
BNC (75 ohm)
to Multimode (ST)
[1 km/ 0.6 miles]
Specifications
Video Formats
NTSC, PAL, SECAM
Optical Specs
Multimode: 850nm
6.0 dB Link Budget
To assure best quality Transition Networks’s Transmitters &
Receivers should be used on both ends of the link.
Single Mode: 1310nm
10.0 dB Link Budget
LEDs
Features
AM Modulation
J/VD-RX-01(xx) Receiver:
Pwr: ON = Power connected
RX: ON = Fiber Video feed IN
NTSC, PAL, SECAM compatibility
Compatible with all video CCTV equipment
Real Time Full Color Video
Dimensions
Automatic Gain Control on Transmitter
Automatic Gain Control on Receiver
Transmitter/Miniature Receiver:
Width: 2.0" [51 mm]
Depth: 2.2" [56 mm]
Height: 1.0" [25 mm]
Receiver:
Width: 4.0" [102 mm]
Depth: 3.0" [76 mm]
Height: 1.0" [25 mm]
Link Pass Through
Wide input power supply:
J/VD-TX-01(xx) Transmitter:
Pwr: ON = Power connected
RX: ON = Copper Video feed IN
Power Supply
• Transmitter: 9 – 24 VAC; 9 – 40 VDC
• Receiver: 9 – 16 VAC/DC
Transmitter:
9 – 40 VDC, 9 – 24 VAC
Receiver:
9 – 16 VAC/DC
Video Specification:
• Input Video: .5 to 2-volt pk-pk
(75 ohms)
Power Consumption
• Bandwidth: 5 Hz – 10 MHz
Storage Temperature
-25 to 85°C
• Differential Gain: < 5 %
Altitude
0 – 10,000 feet
• Differential Phase: < 5°
Operating Humidity
5% – 95% non-condensing
• Tilt: < 1%
Shipping Weight
1 lb. (0.45 kg)
Safety Compliance
CE Mark
Power Supply: UL listed, EN60950
• Signal/Noise Ratio: 60dB
Extended temperature rating for use in controlled
outdoor applications
Analog CCTV Video Point System™
Slide-In-Module Media Converters
page 68
< 122 >
Visit our website at www.transition.com
-40 to 75°C
Regulatory Compliance for Emissions
FCC Class A, EN55022 Class A
Regulatory Compliance for Immunity
EN55024
Warranty
See Also:
2 watts
Operating Temperature (Standard)
Lifetime
J/VD-MRX-01: Miniature Video Receiver
BNC (75 ohm)
to Multimode (ST)
[1 km/ 0.6 miles]
J/VD-TX-01(SC): Video Transmitter
BNC (75 ohm)
to Multimode (SC)
[1 km/ 0.6 miles]
J/VD-RX-01(SC): Video Receiver
BNC (75 ohm)
to Multimode (SC)
[1 km/ 0.6 miles]
J/VD-MRX-01(SC): Miniature Video
Receiver
BNC (75 ohm)
to Multimode (SC)
[1 km/ 0.6 miles]
J/VD-TX-01(SM): Video Transmitter
BNC (75 ohm)
to Single Mode (ST)
[10 km/ 6.2 miles]
J/VD-RX-01(SM): Video Receiver
BNC (75 ohm)
to Single Mode (ST)
[10 km/ 6.2 miles]
J/VD-MRX-01(SM): Miniature Video
Receiver
BNC (75 ohm)
to Single Mode (ST)
[10 km/ 6.2 miles]
Optional Accessory
(sold separately)
Mounting Kit:
WMBJ-V
Wall Mount Bracket Kit
stand-alone
media converter
Analog CCTV Video + Data: Transmitter & Receiver
SVIDF201x-100
V
NEW
D
Transition Networks's Analog Video +
Data TX and RX units transport
analog composite video and data
simultaneously over multimode or
single mode fiber up to 20 km. The
TX device receives the video output
from the camera and transmits it over
the fiber cable. In addition, the TX
device receives the data stream over
fiber and transmits it to the camera to
control PTZ functionality. The RX
device receives the video signal on
fiber and converts it back to an analog
composite video stream and outputs
the video on coaxial cable to the
monitor. In addition, the RX device
receives the data stream from the PTZ
controller and transmits it over the
fiber cable to the other end of the link.
SVIDF201x-110
NEW
Table of Contents
Select Media Converter
Select Switch
video
Connect uni-directional analog video devices over fiber
All conversion is performed in real
time. Automatic gain control installed
on both Transmitter and Receiver
maintains desired quality of video’s
contrast and brightness for extended distances. No field
adjustments are necessary. Wide input range power supply
allows for multiple choices of power source including
camera power supply.
Features
AM Modulation
NTSC, PAL, SECAM compatibility
Video Transmitter (camera side)
SVIDF2011-100
BNC (75 ohm) [228 m/750 ft.]
to 850nm Multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SVIDF2013-100
BNC (75 ohm) [228 m/750 ft.]
to 850nm Multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SVIDF2012-100
BNC (75 ohm) [228 m/750 ft.]
to 1310nm Single Mode (ST)
[20 km/12.4 mi.] Link Budget: 15.0 dB
Video Receiver
(monitor/controller side)
Video Formats
NTSC, PAL, SECAM
Data Formats
RS-232, RS-422, RS-485
Data Rate
Serial: 115 kb/s
Status LEDs
PWR (Power): ON = Power connected
V (video): ON = video signal present
D (data): ON = data transmitted
Dimensions
Transmitter:
Width: 2.9" [74 mm]
Depth: 3.0" [76 mm]
Height: 1.0" [25 mm]
Receiver:
Width: 3.3" [84 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Wide input power supply:
• Transmitter: 9 – 24 VAC; 9 – 40 VDC
Power Supply
Automatic Gain Control on TX and RX
Input Power (TX):
9 – 24 VAC/VDC direct input
Input Power (RX):
External AC/DC; 12 VDC, 0.4A
Real Time Full Color Video
Video Specification:
SVIDF2011-110
BNC (75 ohm) [228 m/750 ft.]
to 850nm Multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Specifications
Extended temperature rating
Transparent to Data Encoding/Compatible with Major
CCTV Camera Manufacturers
Environment
-100 models: -40°C to +75°C
operating temperature
-110 models: 0°C to +60°C operating
temperature
Altitude
0 – 10,000 feet
• Input Video: 0.5 to 2-volt pk-pk (75 ohms)
Operating Humidity
5% – 95% non-condensing
• Receiver: 9 – 16 VAC/DC
Shipping Weight
2 lbs. [0.90 kg]
• Differential Gain: < 5 %
Compliance
CISPR/EN55022 Class A + EN55024;
EN60950 Class A; FCC Class A;
CE Mark
Warranty
Lifetime
• Differential Phase: < 5°
• Tilt: < 1%
• Signal/Noise Ratio: 60dB
industrial
Ordering Info
Supports unidirectional RS-232, RS-422 or RS485 data
transmission for PTZ camera functionality
• Bandwidth: 5 Hz – 10 MHz
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
SVIDF2013-110
BNC (75 ohm) [228 m/750 ft.]
to 850nm Multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SVIDF2012-110
BNC (75 ohm) [228 m/750 ft.]
to 1310nm Single Mode (ST)
[20 km/12.4 mi.] Link Budget: 15.0 dB
Optional Accessories
(sold separately)
Mounting Options:
WMBJ-V (see page 70)
Wall Mount Bracket Kit
(for -100 models only)
WMBD (see page 70)
DIN Rail Bracket 5.0" [127 mm]
(for -110 models only)
WMBL (see page 70)
Wall Mount Bracket 4.0" [102 mm]
(for -110 models only)
E-MCR-04 (see page 70)
12-slot Media Converter Rack
(for -110 models only)
RMS19-SA4-01 (see page 71)
4-slot Media Converter Shelf
(for -110 models only)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS (see page 72)
Piggy Back Power Supply
SPS-1872-SA (see page 72)
Stand-Alone Power Supply
(for -110 models only)
See Also:
Analog CCTV Video + Data Point System™
Slide-In-Module Media Converters
page 69
Call us at 800-526-9267 or 952-941-7600
< 123 >
stand-alone
media converter
Table of Contents
Select Media Converter
Select Switch
Industrial 10/100BASE-TX to 100BASE-FX
SISTF101x-111-LRx
Industrial Media Converter
NEW
Transition Networks’s Industrial Media Converters are hardened devices
designed to reliably operate in harsh environments such as those found
on factory floors, outdoor enclosures or other hazardous environments.
Eliminate EMI and RFI issues or overcome distance limitations with
copper based cabling by using the Industrial Media Converter to
convert your copper based equipment over to fiber optics. The media
converter can connect to either 10Base-T or 100Base-TX ports and
provides a 100Base-FX fiber optic connection for links up to 20km.
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
Extend Network Distance in Industrial
Applications
Features
Auto-Negotiation (see page 14)
AutoCross™ (see page 14)
Link Pass Through (see page 15)
Included
Standard (0°C to 60°C) or extended
(-40°C to 75°C) operating temperature
SISTF1014-111-LR
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
Dry Contact Relay Alarm Output
Dual Auto-Sensing Redundant DC Power Inputs
Media Converter Mode or Switch Converter Mode
Extended Operating Temperature
-40°C to +75°C
Barrel connector interface cable included for
SISTF1011-111-LRT
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
connecting external AC/DC power supply
Specifications
Dimensions
Width: 2.1" [54 mm]
Depth: 4.1" [105 mm]
Height: 5.3" [135 mm]
Standards
IEEE Std. 802.3™, 802.3u™, 802.3x™
Status LEDs
PWR (Power): ON = Unit has power
connected
PWR 1 (Power): ON = primary power
connected
PWR 2 (Power): ON = backup power
connected
Fault: ON = Power failure or port link failure
LNK/ACT (Ports 1 – 2): ON = Link;
Flashing = data transmitting
HDX/FDX (Ports 1 – 2):
ON = Full duplex mode
10/100 (UTP): ON = 100Mbps
Ingress Protection
IP 31
Input Power
12 to 48 VDC, 0.2A-0.7A, redundant inputs
with reverse polarity protection; Additional
barrel connector
1: Enable / Disable Port Alarms
2: Enable / Disable Link Pass Through
3: Full / Half Duplex 100BASE-FX
4: Converter / Switch Mode
Shipping Weight
Dip Switches
Power Consumption 4.6 watts
Environment
0 to +60°C Std. operating temp.
-40 to +75°C Ext. operating temp.
5 – 95% humidity non-condensing
0 – 10,000 feet altitude
-40 to +85°C storage temp.
2 lbs. [0.90 kg]
Safety Compliance
UL 60950; UL508; CSA C22.2 no 60950
EMI Compliance
CISPR/EN55022 Class A; FCC Class A;
CE Mark; EN61000-4-2; EN61000-4-3;
EN61000-4-4; EN61000-4-5; EN61000-4-6
Environmental Compliance
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Warranty
< 124 >
Visit our website at www.transition.com
SISTF1011-111-LR
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SISTF1013-111-LR
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
DIN Rail Mounting and Wall Mount Brackets
See pages 171–181 for complete fiber optic connector specs.
Standard Operating Temperature
0°C to +60°C
Lifetime
SISTF1013-111-LRT
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SISTF1014-111-LRT
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
Optional Accessories
(sold separately)
External AC/DC Power Supply:
SPS-UA12DHT
(100-240 VAC input -25°C to +70°C
operating temperature)
Table of Contents
Select Media Converter
Select Switch
Industrial 10/100BASE-TX to 100BASE-FX
stand-alone
media converter
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
SISTF101x-141-LRx
Industrial Switch
NEW
Transition Networks’s Industrial Switches are hardened devices
designed to reliably operate in harsh environments such as those found
on factory floors, outdoor enclosures or other hazardous environments.
Eliminate EMI and RFI issues or overcome distance limitations with
copper based cabling by using the Industrial Media Converter to
convert your copper based equipment over to fiber optics. The media
converter can connect to either 10Base-T or 100Base-TX ports and
provides a 100Base-FX fiber optic connection for links up to 20km.
industrial
Extend Network Distance in Industrial
Applications
Features
Auto-Negotiation (see page 14)
Ordering Info
Standard Operating Temperature
0°C to +60°C
SISTF1011-141-LR
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
AutoCross™ (see page 14)
DIN Rail Mounting and Wall Mount Brackets
Included
SISTF1013-141-LR
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
Standard (0°C to 60°C) or extended
(-40°C to 75°C) operating temperature
Dual Auto-Sensing Redundant DC Power Inputs
Barrel connector interface cable included for
connecting external AC/DC power supply
SISTF1014-141-LR
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
Extended Operating Temperature
-40°C to +75°C
Specifications
See pages 171–181 for complete fiber optic connector specs.
Data Memory Buffer 512Kb
Standards
IEEE Std. 802.3™, 802.3u™, 802.3x™
Backplane
1.0 Gbps
Status LEDs
PWR (Power): ON = Unit has power
connected
PWR 1 (Power): ON = primary power
connected
PWR 2 (Power): ON = backup power
connected
Fault: ON = Power failure or port link failure
LNK/ACT (fiber): ON = Link;
Flashing = data transmitting
FDX/COL (fiber): ON = Full duplex mode;
Flashing = collisions occurring
RJ-45 (Ports 1 – 4):
ON orange = Full duplex mode;
Flashing orange = collisions occurring;
ON green = UTP link;
Flashing green = data transmitting
Dimensions
Width: 2.1" [54 mm]
Depth: 4.1" [105 mm]
Height: 5.3" [135 mm]
Dip Switches
1: Full Duplex Fiber / Half Duplex Fiber
Safety Compliance
UL 60950; UL508; CSA C22.2 no 60950
Data Transfer Rate
10BASE-T: 14,880 pps
100BASE-TX: 148,800 pps
EMI Compliance
MAC Addresses
1K
CISPR/EN55022; EN60950 Class A; FCC
Class A; CE Mark; EN61000-4-2;
EN61000-4-3; EN61000-4-4; EN61000-4-5;
EN61000-4-6
Ingress Protection
IP 31
Input Power
12 to 48 VDC, 0.2A-0.7A, redundant inputs
with reverse polarity protection; Additional
barrel connector
Power Consumption 3.3 watts
Environment
Shipping Weight
0 to +60°C Std. operating temp.
-40 to +75°C Ext. operating temp.
5 – 95% humidity non-condensing
0 – 10,000 feet altitude
-40 to +85°C storage temp.
2 lbs. [0.90 kg]
SISTF1011-141-LRT
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SISTF1013-141-LRT
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SISTF1014-141-LRT
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
Optional Accessories
(sold separately)
External AC/DC Power Supply:
SPS-UA12DHT
(100-240 VAC input -25°C to +70°C
operating temperature)
Environmental Compliance
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Warranty
Call us at 800-526-9267 or 952-941-7600
Lifetime
< 125 >
stand-alone
media converter
Table of Contents
Select Media Converter
Select Switch
Industrial Switch 10/100BASE-TX
SISTF1010-1x0-LRx
Industrial Switch
NEW
Transition Networks’s Industrial Switches are hardened
devices designed to reliably operate in harsh environments
such as those found on factory floors, outdoor enclosures
or other hazardous environments.
Ordering Info
Features
Specifications
Auto-Negotiation (see page 14)
Standards
IEEE Std. 802.3™, 802.3u™,
802.3x™
Status LEDs
PWR (Power): ON = unit has power
connected
PWR 1 (Power): ON = primary
power connected
PWR 2 (Power): ON = backup
power connected
LNK/ACT (ports 1 – 8): ON = Link;
FLASHING = data transmitting
FDX/COL (ports 1 – 8): ON = Full
duplex mode; FLASHING = collisions
occurring
AutoCross™ (see page 14)
Standard (0°C to 60°C) or Extended operating
temperature (-40°C to 75°C)
Dual Auto-Sensing Redundant DC Power Inputs
DIN Rail Mounting and Wall Mount Brackets Included
Barrel connector interface cable included
for connecting external AC/DC power supply
Utilize Ethernet Connectivity in
Industrial Automation
Data Transfer Rate
10BASE-T: 14,880 pps
100BASE-TX: 148,800 pps
MAC Addresses
-150 models: 1K
-180 models: 2K
Data Memory Buffer -150 models: 512Kb
-180 models: 1Mb
Backplane
-150 models: 1.0 Gbps
-180 models: 1.6 Gbps
Dimensions
Width: 2.1" [54 mm]
Depth: 4.1" [105 mm]
Height: 5.3" [135 mm]
Ingress Protection
IP 31
Input Power
12 to 48 VDC; 0.2A; redundant
inputs with reverse polarity
protection
Additional barrel connector
Power Consumption -150 models: 2.8 Watts
-180 models: 4.6 Watts
Environment
0 to +60°C standard operating
temperature;
-40 to +75°C extended operating
temperature;
5% – 95% humidity noncondensing;
0 – 10,000 ft. altitude
-40 to +85°C storage temperature
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
UL 60950; UL508; CSA C22.2 no
60950
EMI Compliance
CISPR22/EN55022; EN60950 Class
A; FCC Class A; CE Mark; EN610004-2; EN61000-4-3; EN61000-4-4;
EN61000-4-5;
EN61000-4-6
Environmental Compliance
Warranty
< 126 >
Visit our website at www.transition.com
IEC60068-2-32 (Free fall);
IEC60068-2-27 (Shock);
IEC60068-2-6 (Vibration)
Lifetime
Standard Operating
Temperature: 0°C to +60°C
Extended Operating
Temperature: -40°C to +75°C
SISTF1010-150-LR (standard temp)
SISTF1010-150-LRT (extended temp)
(5) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
SISTF1010-180-LR (standard temp)
SISTF1010-180-LRT (extended temp)
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
Optional Accessories
(sold separately)
External AC/DC Power Supply:
SPS-UA12DHT
(100-240 VAC input -25°C to +70°C
operating temperature)
Industrial 10/100BASE-TX to 100BASE-FX
stand-alone
media converter
NEW
Incorporate Redundant Ring technology into your industrial automation
network to increase reliability and system uptime. Critical
communication needs can now be protected using redundant copper or
fiber links with switching recovery times of less than 300ms. These 8port switches can be SNMP managed via web browser to configure all
of the latest advanced industrial networking capability including IGMP
snooping, VLANs, QoS, port mirroring and trunking.
industrial
Transition Networks’s Industrial Switches are hardened devices
designed to reliably operate in harsh environments such as those found
on factory floors, outdoor enclosures or other hazardous environments.
Features
Ordering Info
Industrial Redundant Ring Topologies
AutoCross™ (see page 14)
IEEE 802.1P, 4-level priority queuing
Auto-Negotiation (see page 14)
IEEE 802.1Q VLAN capability
Redundant Ring Switching Technology
(recovery time < 300ms)
SISTM1014-162-LR
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
SNMP trap and SMTP email trap support
SNTP Clock Synchronization
Bandwidth Allocation
Extended Operating Temperature
-40°C to +75°C
Ingress Packet Filtering
DHCP Client Support
SISTM1010-180-LRT
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
Spanning Tree/Rapid Spanning Tree
TFTP Firmware Update
Dual Homing Application Support
System Configuration Restore/Backup
Specifications
Standard (0°C to 60°C) or extended
(-40°C to 75°C) operating temperature
Barrel connector interface cable included for
connecting external AC/DC power supply
Dimensions
Standards
IEEE Std. 802.3™, 802.1p™, 802.1Q™,
802.3u™, 802.1d™, 802.1w™, 802.3x™
Status LEDs
PWR (Power): ON = power connected
R.M.: ON = Device is the Master in the
redundant ring network
PWR 1 (Power): ON = primary power
connected
PWR 2 (Power): ON = backup power
connected
Fault: ON = Fault on port link or loss of PWR
1 or PWR 2
LNK/ACT (Fiber): ON = Link on fiber
100Mb/s; Flashing = data transmitting
FDX/COL (Fiber): ON = Full duplex link on
fiber; Flashing = collisions occurring
10BASE-T: 14,880 pps
100BASE-TX: 148,800 pps
MAC Addresses
2K
Max Packet Size
1536 bytes
Data Memory Buffer 1Mb
Backplane
2.0 Gbps
SNMP MIB
RFC 1213 MIBII, RFC 1493 Bridge MIB,
RMON RFC 1757, RFC 2674 VLAN MIB, RFC
1643 Ethernet like MIB, RFC 1215 Trap MIB
SISTM1010-180-LR
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
SISTM1013-162-LR
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
Port Trunking/Mirroring
Dry Contact Relays
Standard Operating Temperature
0°C to +60°C
SISTM1011-162-LR
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
IGMP Snooping V1 with Query mode
Auto-Sensing Redundant DC Power Inputs
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
SISTM101x-1xx-LRx
Managed Redundant Industrial Switch
Data Transfer Rate
Table of Contents
Select Media Converter
Select Switch
Width: 2.1" [54 mm]
Depth: 4.1" [105 mm]
Height: 5.3" [135 mm]
Ingress Protection
IP 31
Input Power
12 to 48 VDC, 0.2A, redundant inputs with
reverse polarity protection; Additional barrel
connector cable
Power Consumption -180 Models: 4.6 watts
-162 Models: 6.0 watts
Environment
0 to +60°C Std. operating temp.
-40 to +75°C Ext. operating temp.
-40 to +85°C storage temp.
5 – 95% humidity non-condensing
0 – 10,000 feet altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
UL 60950; cUL60950
EMI Compliance
CISPR22/EN55022; EN60950 Class A; FCC
Class A; CE Mark; EN61000-4-2; EN61000-43; EN61000-4-4; EN61000-4-5; EN61000-4-6
Warranty
Lifetime
SISTM1011-162-LRT
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (ST)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SISTM1013-162-LRT
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
SISTM1014-162-LRT
(6) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
Optional Accessories
(sold separately)
External AC/DC Power Supply:
SPS-UA12DHT
(100-240 VAC input -25°C to +70°C
operating temperature)
< 127 >
stand-alone
media converter
Substation Industrial Switch 10/100BASE-TX to 100BASE-FX
SIBTF10xx-1xx-Mx
Substation Industrial Switch
Extend Network Distance in Substation
Eliminate EMI and RFI
issues or overcome
distance limitations
with copper based
cabling by using the
Industrial Switch to
convert your copper
based equipment over
to fiber optics. The
switch can connect to
either 10BASE-T or
100BASE-TX ports and
provides a 100BASEFX fiber optic
connection for links up
to 20km in both
duplex and single fiber
configurations.
Specifications
See pages 171–181 for complete fiber optic connector specs.
Transition Networks's Substation Industrial Switches
are hardened devices designed to reliably operate in
harsh substation environments or other hazardous
environments (Class 1, Div. 2). The switches are
IEEE1613 compliant and offer many, industry first
features such as a Lifetime Warranty, Automatic Link
Restoration, Far-End Fault, Pause and the widest
selection of fiber optic ports and distances.
A wide voltage input range accommodates both AC
and DC voltage inputs and the extended operating
temperature range of -40°C to +75°C with no fans,
offers flexibility in the mounting environment with
the utmost in reliability. For mission critical
applications, a dual fiber port version is offered that
can be used in a redundant fiber ring or multiple
path configurations.
Standards
IEEE Std. 802.3™, 802.3u™, 802.3x™,
802.3p™
Status LEDs
PRI P.G. (Power):
ON = primary power connected
AUX P.G. (Power):
ON = auxiliary power connected
FAULT: ON = unit failed to initialize
correctly
100M: ON = Link on fiber 100Mb/s;
FLASHING = data transmitting
10M: ON = Link on copper 10Mb/s;
FLASHING = data transmitting
Switches
Switch 1: Auto-Negotiation on/off
Switch 2: Force 10Mb or 100Mb (copper)
Switch 3: Full/Half duplex (copper)
Switch 4: Full/Half duplex
Switch 5: Full/Half duplex (fiber port 5, if
present)
Switch 6: Link Pass Through on/off
(-110 models only)
Switch 7: Fiber Redundancy on/off
(-130 models only)
Switch 8: AutoCross™ On/Off
Dimensions (-110 models)
Width: 3.38" [86 mm]
Depth: 5.0" [127 mm]
Height: 6.0" [152 mm]
Features
Dimensions (-130 & -140 models)
Width: 4.13" [105 mm]
Depth: 5.0" [127 mm]
Height: 6.0" [152 mm]
IEEE 1613 compliant
Ingress Protection
IP 30
AutoCross™ (see page 14)
Input Power
Auto-Negotiation (see page 14)
48 to 170 VDC; 15W max., single or
redundant inputs
Environment
-40 to +75°C operating temp;
-40 to +85°C storage temp;
5% – 95% humidity non-condensing;
0 – 10,000 ft. altitude
Pause (see page 15)
Shipping Weight
4 lbs. [1.86 kg]
Automatic Link Restoration (see page 16)
Compliance
UL/C-UL1604 Class 1, Div 2, Groups A, B,
C, D; UL 60950; UL508; CSA C22.2 no
60950; CISPR22/EN55022; EN60950 Class
A; FCC Class A; CE Mark; IEC 61000-4;
IEC 61850-3; IEEE1613; NEMA TS-2
DIN-Rail, Rack or Wall Mounted
Warranty
Lifetime
Single or Redundant 48 – 170 VDC Power Inputs
See product manual for latest EMS and Environmental test
ratings.
Link Pass Through (-110 model) (see page 15)
Far End Fault (see page 14)
Redundant Fiber Ports (-130 model)
Dry Contact Relays
-40°C to 75°C operating temp
Hazardous Location Rated (Class 1, Div. 2/Zone2)
< 128 >
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
SIBTF1011-110-MS (single power input)
SIBTF1011-110-MR (dual power inputs)
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SIBTF1011-130-MS (single power input)
SIBTF1011-130-MR (dual power inputs)
(3) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SIBTF1011-140-MS (single power input)
SIBTF1011-140-MR (dual power inputs)
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SIBTF1013-110-MS (single power input)
SIBTF1013-110-MR (dual power inputs)
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SIBTF1013-130-MS (single power input)
SIBTF1013-130-MR (dual power inputs)
(3) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SIBTF1013-140-MS (single power input)
SIBTF1013-140-MR (dual power inputs)
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SIBTF1014-110-MS (single power input)
SIBTF1014-110-MR (dual power inputs)
(1) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
SIBTF1014-130-MS (single power input)
SIBTF1014-130-MR (dual power inputs)
(3) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (2) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
SIBTF1014-140-MS (single power input)
SIBTF1014-140-MR (dual power inputs)
(4) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to (1) 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
stand-alone
media converter
Industrial Device Server RS232 to 100BASE-FX
Transition Networks’s Industrial
Device Servers provide a serial-toEthernet conversion to enable
customers to integrate any legacy
serial-based device into their
Ethernet networks located in either
the office environment or on the
factory floor.
Table of Contents
Select Media Converter
Select Switch
SDSFE311x-100
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
Network Enable Serial Devices in Industrial Applications
industrial
Ordering Info
SDSFE3111-100
DB-9 [15 m/49 ft.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 12.0 dB
SDSFE3113-100
DB-9 [15 m/49 ft.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 12.0 dB
These hardened devices are
designed to reliably operate in
harsh environments and/or
extreme temperatures such as
those found on factory floors,
outdoor enclosures or other
hazardous environments.
SDSFE3114-100
DB-9 [15 m/49 ft.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 15.0 dB
SDSFE3115-100
DB-9 [15 m/49 ft.]
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 19.0 dB
Network-enable serial based
devices quickly and cost-effectively
with these hardened industrial
serial-to-Ethernet device servers.
The device server can connect to
RS232 serial ports and provides a
100BASE-FX Fast Ethernet fiber
optic connection for links up to
80 km.
Device servers can also help
eliminate EMI and RFI issues or
overcome distance limitations with
copper based serial cabling by
converting your copper-based
serial equipment over to fiber
optics.
Features
SDSFE3117-100
DB-9 [15 m/49 ft.]
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 34.0 dB
Optional Accessories
See pages 171–181 for complete fiber optic connector specs.
Standards
EIA/TIA-574, EIA/TIA RS232E, IEEE Std.
802.3™
Data Rate
Serial: 115 kb/s
Fiber: 100Mb/s
Drivers
Windows 95, 98, ME, 2000, 2003, XP, NT 4.0
Microsoft NT/2000/2003 Terminal Server
Signal Support
TxD, RxD, CTS, RTS, DTR, DSR, RI, DCD,
GND
Switches
Switch 1: Primary power alarm on/off
Switch 2: Redundant power alarm on/off
Switch 3: Fiber port alarm on/off
Switch 4: n/a
Status LEDs
PWR (Power): ON = primary power connected
RPS (Power): ON = backup power connected
ALM: ON = fault on port link or loss of PWR
or RPS
100 (fiber): ON = link on fiber 100Mb/s
LNK/ACT (fiber): ON = fiber link / activity
POST: ON = Power On Self Test successful;
FLASHING = performing POST
ACT (copper): ON = Serial link / activity
Dimensions
Width: 2.0" [50 mm]
Depth: 3.9" [100 mm]
Height: 4.7" [120 mm]
Remote Management
Supports asynchronous serial data
rates up to 115kb/s
Control up to 4,096 virtual COM
ports from one PC
Extended (0°C to 70°C) operating
temperature
Redundant DC Power Inputs
Dry Contact Relay output for power
failure and link down
DIN rail mounting brackets included
Call us at 800-526-9267 or 952-941-7600
(sold separately)
Specifications
Ingress Protection
IP 30
Input Power
9 to 48 VDC; 1.0A; redundant inputs
Environment
0 to +70°C standard operating temperature;
5% – 90% humidity non-condensing; 0 –
10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Compliance
CISPR22/EN55022 Class A + EN55024;
EN60950 Class A; FCC Class A; CE Mark
Warranty
Lifetime
External AC/DC Power Supply:
SPS-UA12DHT
(100-240 VAC input -25°C to +70°C
operating temperature)
See page 170 for EMS and
Environmental test ratings.
< 129 >
stand-alone
media converter
Device Server RS-232/422/485 to 100BASE-FX
Table of Contents
Select Media Converter
Select Switch
SDSFE311x-120
Transition Networks’s Device
Servers provide a serial-toEthernet conversion to enable
customers to integrate any
legacy serial-based device into
their Ethernet networks.
Network-enable serial based
devices quickly and costeffectively with these serial-toEthernet device servers. The
device server can connect to RS232, RS-422 or RS-485 serial
ports and provides a
10/100BASE-TX or 100BASE-FX
Ethernet fiber optic connection
for links up to 80 km.
Network Enable Serial Devices
Ordering Info
SDSFE3110-120
DB-9 [15 m/49 ft.]*
to RJ-45 [100 m/328 ft.]
SDSFE3111-120
DB-9 [15 m/49 ft.]*
to 1300nm multimode (ST)
[2 km / 1.2 mi.] Link Budget: 12.0 dB
SDSFE3113-120
DB-9 [15 m/49 ft.]*
to 1300nm multimode (SC)
[2 km / 1.2 mi.] Link Budget: 12.0 dB
SDSFE3114-120
DB-9 [15 m/49 ft.]*
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 15.0 dB
Features
AutoCross™ (RJ-45 model only)
(see page 14)
SDSFE3115-120
DB-9 [15 m/49 ft.]*
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 19.0 dB
Specifications
Auto-Negotiation (RJ-45 model only)
See pages 171–181 for complete fiber optic connector specs.
(see page 14)
Standards
EIA/TIA RS-232/422/485, EIA/TIA-574,
IEEE Std. 802.3™
Data Rate
Serial: 115 kb/s
RJ-45: 10/100Mb/s
Fiber: 100Mb/s
Remote Management
Supports asynchronous serial data rates up to 115kb/s
Supports RS-232, 4-wire RS-422 or
2/4-wire RS485 operation
Control up to 4,096 virtual COM ports from one PC
Drivers
Windows 95, 98, ME, 2000, 2003, XP, NT
4.0
Microsoft NT/2000/2003 Terminal Server
Switches
Switch 1: ON = console serial port (RS232); OFF = data serial port
Switch 2: RS-232 mode on/off
Switch 3: RS-422/485 (4-wire) mode
on/off
Switch 4: RS-485 (2-wire) mode on/off
Switch 7: Termination resistor on/off
Status LEDs
PWR (Power): ON = power connected
100 (RJ-45): ON = Link at 100Mb/s
LNK/ACT (RJ-45): ON = UTP link;
FLASHING = activity
LNK/ACT (Fiber): ON = fiber link;
FLASHING = activity
POST: ON = Power On Self Test successful
ACT (serial): ON = Serial link
FLASHING = activity
Dimensions
Width: 3.5" [90 mm]
Depth: 4.3" [109 mm]
Height: 1.3" [32 mm]
Input Power
External AC/DC; 9 to 32 VDC, 0.8A
Environment
0 to +50°C std. Operating temp.
5 – 90% humidity non-condensing;
0 – 10,000 feet altitude
Shipping Weight
2 lb. [0.90 kg]
Compliance
CISPR22/EN55022 Class A + EN55024;
EN60950 Class A; FCC Class A; CE Mark
Warranty
Lifetime
DIN rail mounting brackets included
< 130 >
Visit our website at www.transition.com
SDSFE3117-120
DB-9 [15 m/49 ft.]*
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 34.0 dB
*Max. distance on the serial port is
dependent on protocol:
15 m/49 ft. (RS-232);
1.2 km/0.7 mi. (RS-422/485)
stand-alone
media converter
Industrial Device Server RS-422/485 to 100BASE-FX
Transition Networks’s Industrial
Device Servers provide a serial-toEthernet conversion to enable
customers to integrate any legacy
serial-based device into their
Ethernet networks located in either
the office environment or on the
factory floor.
Table of Contents
Select Media Converter
Select Switch
SDSFE321x-110
mounting options
ethernet
fast ethernet
10/100 bridging
10/100/1000
gigabit ethernet
atm/oc-x
ds3-t3/e3
high speed serial
rs232
rs422/485
t1/e1
pots 2-wire
video
Network Enable Serial Devices in Industrial Applications
industrial
Ordering Info
SDSFE3211-110
Terminal Block [1.2 km / 0.7 miles]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 12.0 dB
SDSFE3213-110
Terminal Block [1.2 km / 0.7 miles]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 12.0 dB
These hardened devices are
designed to reliably operate in
harsh environments and/or
extreme temperatures such as
those found on factory floors,
outdoor enclosures or other
hazardous environments.
SDSFE3214-110
Terminal Block [1.2 km / 0.7 miles]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 15.0 dB
SDSFE3215-110
Terminal Block [1.2 km / 0.7 miles]
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 19.0 dB
Network-enable serial based
devices quickly and cost-effectively
with these hardened industrial
serial-to-Ethernet device servers.
The device server can connect to
RS-422 or RS-485 serial ports and
provides a 100Base-FX Fast
Ethernet fiber optic connection for
links up to 80km.
Device servers can also help
eliminate EMI and RFI issues or
overcome distance limitations with
copper based serial cabling by
converting your copper-based
serial equipment over to fiber
optics.
Features
Remote Management
SDSFE3217-110
Terminal Block [1.2 km / 0.7 miles]
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 34.0 dB
Optional Accessories
See pages 171–181 for complete fiber optic connector specs.
Standards
EIA/TIA RS-422, EIA/TIA RS-485,
IEEE Std. 802.3™
Data Rate
Serial: 115 kb/s
Fiber: 100Mb/s
Drivers
Windows 95, 98, ME, 2000, 2003, XP, NT 4.0
Microsoft NT/2000/2003 Terminal Server
Switches
Switch 1: Primary power alarm on/off
Switch 2: Redundant power alarm on/off
Switch 3: Fiber port alarm on/off
Switch 7: 2-wire 485 or 4-wire 422/485
Switch 8: Termination resistor on/off
Status LEDs
PWR (Power):
ON = primary power connected
RPS (Power):
ON = backup power connected
ALM:
ON = fault on port link or loss of PWR or RPS
100 (fiber): ON = link on fiber 100Mb/s
LNK/ACT (fiber): ON = fiber link / activity
POST:
ON = Power On Self Test successful;
FLASHING = performing POST
ACT (copper): ON = Serial link / activity
Dimensions
Width: 2.0" [50 mm]
Depth: 3.9" [100 mm]
Height: 4.7" [120 mm]
Supports asynchronous serial data
rates up to 115kb/s
Supports 4-wire RS-422 or 2/4-wire RS485
operation
Control up to 4,096 virtual COM
ports from one PC
Extended (0°C to 70°C) operating temperature
Redundant DC Power Inputs
Dry Contact Relay output for power
failure and link down
DIN rail mounting brackets included
Call us at 800-526-9267 or 952-941-7600
(sold separately)
Specifications
Ingress Protection
IP 30
Input Power
9 to 48 VDC; 1.0A; redundant inputs
Environment
0 to +70°C standard operating temperature;
5% – 90% humidity non-condensing;
0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Compliance
CISPR22/EN55022 Class A + EN55024;
EN60950 Class A; FCC Class A; CE Mark
Warranty
Lifetime
External AC/DC Power Supply:
SPS-UA12DHT
(100-240 VAC input -25°C to +70°C
operating temperature)
See page 170 for EMS and
Environmental test ratings.
< 131 >
transceivers
Table of Contents
Select Media Converter
Select Switch
Ethernet AUI to RJ-45
E-TBT-MC04
Ethernet AUI to RJ-45 Transceiver
NEW
This Attachment Unit Interface (AUI) transceiver provides a method for
connecting a workstation, or any other device with an AUI port, to
twisted pair cabling in a 10BASE-T network. Devices with AUI ports
could include: servers, hubs, bridges and routers. The E-TBT-MC04
transceiver allows twisted pair, UTP or STP, to be connected to these
AUI ports.
Ordering Info
Features
Specifications
Provides a complete interface of the AUI to
Ethernet UTP cable.
Standards
IEEE Std. 802.3™ 10BASE-T
Status LEDs
COL: Blinks when detecting collisions
STAT: Solid Green: UTP Link
established;
Blinks Green: No UTP Link;
4-Blink Pattern: Polarity reversal
detected on UTP cable
TX: Blinks when transmitting data on
the RJ-45
RX: Blinks when receiving data on the
RJ-45
Switches
SW1: SQE Test: Up is enabled
SW2: Link Test: Up is enabled
SW3: Half or Full-Duplex: Up is for
Half, Down is for Full
Dimensions
Width: 3.1" [79 mm]
Depth: 0.8" [20 mm]
Height: 1.7" [43 mm]
Power
No external power required
Supports data transfer rate of 10Mbps
CSMA/CD access mechanism
Capable of driving the UTP cable segment up to
100 meters (328 ft.) without the use of a repeater
Selectable Link test and SQE test functions
AUI locking post design allows the E-TBT-MC04 to
directly attach to a host’s AUI connector
Can be used with or without an AUI cable
LED indicators for network monitoring and
diagnosing
The RJ-45 port will automatically detect and
reverse the polarity on the receive pair if needed.
< 132 > Call us at 800-526-9267 or 952-941-7600
Input Voltage
10.2 to 15.75 VDC
Input Current
250mA@12VDC
Environment
0 – 50°C, 5% – 95% humidity noncondensing, 0 – 10,000 ft. altitude
Shipping Weight
1 lb. [0.45 kg]
Compliance
FCC & CISPR Class A, CE Mark
Warranty
Lifetime
E-TBT-MC04
10BASE5 (AUI) DB-15 male
[50 m/164 ft.]
to 10BASE-T (RJ-45)
[100 m/328 ft.]
Ethernet or Fast Ethernet Twisted Pair to Fiber
pci-based
media converters
Extend Network Distance: Two PCI-Based
Media Converters used back-to-back extend the
distance between two 10BASE-T or 100BASETX devices up to 2 km using multimode fiber or
up to 20 km using single mode fiber.
Fiber to the Desktop: Connect an existing
10BASE-T or 100BASE-TX PC, workstation or
file server directly to a fiber optic backbone in
either full or half-duplex by bringing the fiber
directly to the device. Simply connect the
twisted pair port to the existing twisted pair NIC
to create a safe, effective, space-saving
solution.
Deliver low cost, fiber optic connectivity to the
desktop with these full-featured PCI powered
media converters, designed to install directly
inside a workstation or file server and mount
into any slot on a standard PCI. No configuration
is required; making installation a breeze. Since
power is drawn directly from the PCI slot, no
additional power supply is needed, nor is there
any CPU utilization.
2 sizes to accommodate both standard
and low profile PCI slots
Ordering Info
E-TBT-FRL-N-02(ST)
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 850nm MM (ST)
[2 km/ 1.2 mi.] Link Budget: 13.5 dB
E-TBT-FRL-N-02(SC)
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 850nm MM (SC)
[2 km/ 1.2 mi.] Link Budget: 13.5 dB
Specifications
Standards
IEEE Std. 802.3™
Status LEDs
E-TBT-FRL-N-02(xx) & E-TBT-FRL-NLP-02(xx):
Power: Lit for normal operation
LKF: Link Fiber
LKC: Link Copper
RXF: Receive Fiber
RXC: Receive Copper
E-100BTX-FX-N-01(xx) & E-100BTX-FX-NLP-01(xx):
LED1: Steady = Copper link
LED2: Steady = Fiber link
Switches
E-TBT-FRL-N-02(xx) & E-TBT-FRL-NLP-02(xx):
S1: Switch to enable/disable LinK Pass Through
E-100BTX-FX-N-01(xx) & E-100BTX-FX-NLP-01(xx):
S1: Auto-Negotiation On/Off
S2: Pause On/Off
S3: LPT On/Off
S4: FEF On/Off
Link Pass Through (see page 15)
Dimensions
Provides LEDs for easy network monitoring
Saves space over traditional stand-alone
converters
E-TBT-FRL-N-02(xx) & E-100BTX-FX-N-01(xx):
Width: 0.8" [19 mm]
Depth: 4.8" [121 mm]
Height: 4.8" [121 mm]
E-TBT-FRL-NLP-02(xx) & E-100BTX-FX-NLP-01(xx):
Width: 0.8" [19 mm]
Depth: 4.8" [121 mm]
Height: 3.1" [79 mm]
No need to replace existing NICs
Draws power directly from PCI slot; no
power supply needed
Power Consumption E-TBT-FRL-N-02(xx) & E-TBT-FRL-NLP-02(xx): >450mA
E-100BTX-FX-N-01(xx) & E-100BTX-FX-NLP-01(xx):
600mA
Universal PCI Compliant, supports both
3.3V and 5V signaling environments
Power Source
PCI edge connector
Environment
0°C – 50°C; 5% – 95% humidity non-condensing;
0 – 10,000 ft. altitude
Shipping Weight
1 lb. [0.45 kg]
Compliance
CISPR22/EN55022; EN55024; EN60950 Class A;
FCC Class A; CE Mark
Warranty
Lifetime
E-100BTX-FX-N-01(xx) &
E-100BTX-FX-NLP-01(xx) only:
Auto-Negotiation (see page 14)
Far End Fault
gbic modules
small form factor pluggables
cwdm
network interface cards
pcmcia adapter cards
Extended Network Distance
(see page 14)
Easily installs inside PC or file server; no
configuration required; no drivers to install
pci converters
E-TBT-FRL-Nxx-02(xx) &
E-100BTX-FX-Nxx-01(xx)
PCI-Based Copper to Fiber Media Converters
AutoCross™
Table of Contents
Select Media Converter
Select Switch
E-100BTX-FX-N-01
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm MM (ST)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
E-100BTX-FX-N-01(SC)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm MM (SC)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
E-100BTX-FX-N-01(SM)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Low Profile Cards
E-TBT-FRL-NLP-02(ST)
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 850nm MM (ST)
[2 km/ 1.2 mi.] Link Budget: 13.5 dB
E-TBT-FRL-NLP-02(SC)
10BASE-T (RJ-45) [100 m/328 ft.]
to 10BASE-FL 850nm MM (SC)
[2 km/ 1.2 mi.] Link Budget: 13.5 dB
E-100BTX-FX-NLP-01
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm MM (ST)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
E-100BTX-FX-NLP-01(SC)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm MM (SC)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
E-100BTX-FX-NLP-01(SM)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
(see page 14)
Automatic Link Restoration (see page 16)
Pause (see page 15)
Call us at 800-526-9267 or 952-941-7600
< 133 >
gbic modules
Table of Contents
Select Media Converter
Select Switch
GBIC Modules 1000BASE-LX or SX
TN-GB-xM5x
Transition Networks’s GBIC transceiver is a plug-in module and it is
hot-swappable. It allows for seamless integration of fiber with copper
LAN connections wherever GBIC interface slots are available. This
device is economical, it saves time, offers flexibility and eliminates the
necessity for replacing entire devices when the customers need to
change or upgrade fiber connections.
Fiber Connections with GBICs
Notes:
Using Transition Networks GBIC
modules will not void or interfere with
the original equipment manufacturer's
warranty or maintenance contracts.
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
TN-GB-MM5
1000BASE-SX 850nm MM (SC)
[62.5/125µm: 220 m / 722 ft.]
Link Budget: 8.5 dB
[50/125µm: 550 m / 1804 ft.]
Link Budget: 8.5 dB
Transition Networks GBICs are built to
comply with IEEE 802.3z which is
intended to provide Gigabit
interconnectivity between different
vendors.
TN-GB-SM5
1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 11.0 dB
Transition’s GBIC modules are
compatible with all major switch and
router vendors.
Specifications
Features
Laser Class 1 Product
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE 802.3z 1000BASE-SX;
1000BASE-LX
Dimensions
Width: 1.2" [30 mm]
Depth: 2.6" [65 mm]
Height: 0.40" [10 mm]
Compliant with 802.3z 1000BASE-SX; 1000BASE-LX
Plug-and-Play module
Hot-swappable
Power
TTL Logic Interface
Power Consumption
< 134 >
TN-GB-SM53
1000BASE-LX 1310nm SM (SC)
[30 km/18.6 mi.] Link Budget: 19.0 dB
Visit our website at www.transition.com
TN-GB-xxx: 5V,
no external power required
MIL-GBIC-xxx: 3.3/5V,
no external power required
0.8 watts
Environment
0°C – 70°C
Compliance
UL Registered, CSA, IEC 60825-1 and
IEC 60825-2, CE Marked
Warranty
Lifetime
TN-GB-SM55
1000BASE-LX 1550nm SM (SC)
[50 km/31.1 mi.] Link Budget: 19.0 dB
TN-GB-SM58
1000BASE-LX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 24.0 dB
TN-GB-SM512
1000BASE-LX 1550nm SM (SC)
[120 km/74.6 mi.] Link Budget: 32.0 dB
GBIC Modules for use with
MIL-SM808G(xx) Switch):
MIL-GBIC-SX
1000BASE-SX 850nm MM (SC)
[62.5/125µm: 220 m / 722 ft.]
Link Budget: 8.5 dB
[50/125µm: 550 m / 1804 ft.]
Link Budget: 8.5 dB
MIL-GBIC-LX10
1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 11.0 dB
small form factor
pluggables
Table of Contents
Select Media Converter
Select Switch
Small Form Factor Pluggables
pci converters
TN-SFP-xxx
gbic modules
Hot-Pluggable SFP Footprint LC Optical Transceiver
small form factor pluggables
Digital Diagnostic Function
cwdm
network interface cards
pcmcia adapter cards
Class 1 Laser International Safety Standard IEC-60825 Compliant
Compatible with Small Form Factor Pluggable
Multi-Sourcing Agreement (MSA)
Ordering Info
TN-SFP-OC3M
SFP 100BASE-FX/OC-3
1300nm MM (LC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Note: Per Cisco Systems’s literature,
the Cisco switches with SFP slots do
not accept modules other than Cisco’s
own SFPs. The Cisco switch identifies
the manufacturer ID along with the
part number and blocks operations to
this port for non-Cisco interfaces.
Other major SFP switch manufacturers
do not indicate in their literature that
such restrictions are imposed.
Fiber Connections with SFPs
TN-SFP-OC3S
SFP 100BASE-FX/OC-3
1310nm SM (LC)
[20 km/12.4 mi.] Link Budget: 17.0 dB
TN-SFP-OC12M
OC-12/STM-4 SFP 1300nm MM (LC)
[1 km/0.6 miles] Link Budget: 7.0 dB
TN-SFP-OC12S
OC-12/STM-4 SFP 1310nm SM (LC)
[20 km/12.4 mi.] Link Budget: 14.0 dB
TN-SFP-SX (model without DMI)
TN-SFP-SXD (model with DMI)
1000BASE-SX 850nm MM (LC)
[62.5/125µm: 220 m/722 ft.]
Link Budget: 8.0 dB
[50/125µm: 550 m/1804 ft.]
Link Budget: 8.0 dB
Transition Networks’s SFP units fully
comply with Multi-Sourcing Agreement
(MSA). This compliance allows
Transition Networks SFP modules to
be used on other MSA-compliant SFP
platforms without any problems.
TN-SFP-ESX5
1000BASE-SX 1300nm Ext. MM (LC)
[50/125µm fiber only:
up to 2 km/1.2 mi.] Link Budget: 8.0 dB
Specifications
Applications
See pages 171–181 for complete fiber optic connector specs.
Gigabit Ethernet Switches and Routers
Standards
IEEE 802.3 2003; ANSI X3.297-1997
Fibre Channel Switch Infrastructure
Dimensions
Width: 0.52" [13 mm]
Depth: 2.18" [55 mm]
Height: 0.33" [8 mm]
XDSL Applications
Metro Edge Switching
Power
3.3V
Power Consumption
0.66 watts
Environment
TN-SFP-SX
TN-SFP-LX1
TN-SFP-ESX6
TN-SFP-FC2XM
-10°C – 85°C
TN-SFP-SXD
TN-SFP-ESX5
TN-SFP-ELX1
TN-SFP-FC2XS2:
TN-SFP-LX3
TN-SFP-LX8
TN-SFP-OCx
TN-SFP-FC2XS40
0°C – 70°C
TN-SFP-LX5
TN-SFP-LX12
TN-SFP-LX16
TN-SFP-FC2XS15:
Additional Features
TN-SFP-SX or -LXx SFP modules:
Compliant with IEEE 802.3z Gigabit Ethernet
Compliant with Fiber Channel 1X SM-LC-L FC-PI
TN-SFP-OC3x SFP modules:
Compliant with 100BASE-FX
Compliant with Intermediate-Reach SONET OC-3 /
SDH STM-1 (S-1.1)
TN-SFP-OC12x SFP modules:
Compliant with Intermediate-Reach SONET OC-12 /
SDH STM-4 (S-4.1)
TN-SFP-FC2Xx SFP modules:
Compliant with IEEE 802.3z Gigabit Ethernet
Compliant with Fiber Channel 1X/2X SM-LC-L FC-PI
Compliant with Short-Reach SONET OC-48 / SDH
STM-16 (S-16.1)
Compliance
IEC-60825; FDA 21; CFR 1040.10 and
1040.11
Warranty
Lifetime
TN-SFP-ESX6
1000BASE-SX 1300nm Ext. MM (LC)
[62.5/125µm fiber only:
up to 2 km/1.2 mi.] Link Budget: 8.0 dB
TN-SFP-LX1 (model with DMI)
TN-SFP-ELX1 (model without DMI)
1000BASE-LX 1310nm (LC) SM
[10 km/6.2 mi.] Link Budget: 11.5 dB
TN-SFP-LX3
1000BASE-LX 1310nm (LC) SM
[30 km/18.6 mi.] Link Budget: 19.0 dB
TN-SFP-LX5
1000BASE-LX 1550nm (LC) SM
[50 km/31.1 mi.] Link Budget: 19.0 dB
TN-SFP-LX8
1000BASE-LX 1550nm (LC) SM
[80 km/49.7 mi.] Link Budget: 24.0 dB
TN-SFP-LX12
1000BASE-LX 1550nm (LC) SM
[120 km/74.6 mi.] Link Budget: 32.0 dB
TN-SFP-LX16
1000BASE-LX 1550nm (LC) SM
[160 km/99.4 mi.] Link Budget: 37.0 dB
TN-SFP-FC2XM
OC-48/STM-16/Fibre Channel
1x/2x/1000BASE-SX 850nm (LC) MM
[62.5/125µm: 150 m/492 ft.]*
Link Budget: 6.0 dB
[50/125µm: 300 m/984 ft.]*
Link Budget: 6.0 dB
TN-SFP-FC2XS2
Fibre Channel 2x/1x / OC-48 / STM-16/
1000BASE-LX 1310nm SM (LC)
[2 km/1.2 miles] Link Budget: 8.5 dB
TN-SFP-FC2XS15
Fibre Channel 2x/1x / OC-48 / STM-16/
1000BASE-LX 1310nm SM (LC)
[15 km/9.3 mi.] Link Budget: 13.0 dB
TN-SFP-FC2XS40
Fibre Channel 2x/1x / OC-48 / STM-16/
1000BASE-LX 1310nm SM (LC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
*Link distance at 1000BASE-SX and Fibre
Channel 1x:
220m/722 ft using 62.5/125um MMF
550m/1804 ft using 50/125um MMF
*Link distance at Fibre Channel 2x/OC-48/STM-16:
150m/492 ft using 62.5/125um MMF
300m/984 ft using 50/125um MMF
Call us at 800-526-9267 or 952-941-7600
< 135 >
small form factor
pluggables
Table of Contents
Select Media Converter
Select Switch
Small Form Factor Pluggables CWDM Wavelengths
TN-SFP-xxx-Cxx
Course Wavelength Division Multiplexing (CWDM)
ITU Grid Compliant Wavelengths
NEW
Hot-Pluggable SFP Footprint LC Optical Transceiver
Digital Diagnostic Function
Class 1 Laser International Safety Standard IEC-60825 Compliant
Ordering Info
Compatible with Small Form Factor Pluggable
TN-SFP-OC3S8-Cxx
SFP 100BASE-FX/OC-3 (LC) SM
[80 km/49.7 mi.] Link Budget: 29.0 dB
Multi-Sourcing Agreement (MSA)
Note: Per Cisco Systems’s
literature, the Cisco switches with
SFP slots do not accept modules
other than Cisco’s own SFPs. The
Cisco switch identifies the
manufacturer ID along with the
part number and blocks
operations to this port for nonCisco interfaces. Other major SFP
switch manufacturers do not
indicate in their literature that
such restrictions are imposed.
TN-SFP-OC12S-Cxx
OC-12/STM-4 (LC) SM
[80 km/49.7 mi.] Link Budget: 29.0 dB
Fiber Connections with SFPs
Transition Networks’s SFP units
fully comply with Multi-Sourcing
Agreement (MSA). This
compliance allows Transition
Networks SFP modules to be
used on other MSA-compliant
SFP platforms without any
problems.
TN-SFP-LX8-Cxx
1000BASE-LX/Fibre Channel 1x
(LC) SM
[80 km/49.7 mi.] Link Budget: 24.0 dB
TN-SFP-OC48S-Cxx
OC-48/STM-16/Fibre Channel
2x/1x/1000BASE-LX (LC) SM
[40 km/24.9 mi.] Link Budget: 18.0 dB
xx = center wavelength (λc)
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE 802.3 2003; ANSI X3.2971997 (see additional standards by
part number to the left)
Applications
Date Rate (Mb/s)
Gigabit Ethernet Switches and Routers
Output Wavelength
-5.5nm < λc < +7.5nm
Dimensions
Width: 0.52" [13 mm]
Depth: 2.18" [55 mm]
Height: 0.33" [8 mm]
Power
3.3V
Fibre Channel Switch Infrastructure
XDSL Applications
Metro Edge Switching
Power Consumption
0.66 watts
SKU
Min
Typical
Max
Additional Features
TN-SFP-OC3S8-Cxx
-TN-SFP-OC12S-Cxx
-TN-SFP-LX8-Cxx
100
TN-SFP-OC48S-Cxx 622
200
--2670
TN-SFP-LX8-Cxx SFP modules:
Compliant with IEEE 802.3z Gigabit Ethernet
Compliant with Fiber Channel 1X SM-LC-L FC-PI
TN-SFP-OC3S8-Cxx SFP modules:
Compliant with 100BASE-FX
Compliant with Intermediate-Reach SONET OC-3 /
SDH STM-1 (S-1.1)
TN-SFP-OC12S-Cxx SFP modules:
Compliant with Intermediate-Reach SONET OC-12 /
SDH STM-4 (S-4.1)
TN-SFP-OC48S-Cxx SFP modules:
Compliant with IEEE 802.3z Gigabit Ethernet
Compliant with Fiber Channel 1X/2X SM-LC-L FC-PI
Compliant with Short-Reach SONET OC-48 / SDH
STM-16 (S-16.1)
< 136 >
Visit our website at www.transition.com
155
622
1250
2488
Environment
0°C – 70°C
Compliance
IEC-60825; FDA 21; CFR 1040.10
and 1040.11
Warranty
Lifetime
27 = 1270nm
29 = 1290nm
31 = 1310nm
33 = 1330nm
35 = 1350nm
37 = 1370nm
39 = 1390nm
41 = 1410nm
43 = 1430nm
45 = 1450nm
47 = 1470nm
49 = 1490nm
51 = 1510nm
53 = 1530nm
55 = 1550nm
57 = 1570nm
59 = 1590nm
61 = 1610nm
Course Wavelength Division Multiplexing (CWDM)
CWDM
Table of Contents
Select Media Converter
Select Switch
CWDM-xxxxxxxxR
pci converters
gbic modules
Ordering Info
NEW
small form factor pluggables
CWDM-_ _____ __R
Connectors
Module Type
A
M
Features
Increase bandwidth on existing fiber infrastructure
Alleviate fiber exhaustion
Transmit multiple protocols over an existing duplex
fiber link by combining the fiber outputs of multiple
media converters
cwdm
Add/Drop Mux
LC
LC/PC
Mux/Demux
SC
SC/PC
Channel Configuration
Channel Configuration
(Module Type A Only)
(Module Type M Only)
network interface cards
pcmcia adapter cards
1A451
1 Ch. Add/Drop 1510nm (group 451)
451
4 Ch. 1510/1530/1550/1570nm
1B451
1 Ch. Add/Drop 1530nm (group 451)
453
4 Ch. 1530/1550/1570/1590nm
1C451
1 Ch. Add/Drop 1550nm (group 451)
455
4 Ch. 1550/1570/1590/1610nm
1D451
1 Ch. Add/Drop 1570nm (group 451)
551
5 Ch. 1510/1530/1550/1570nm + 1310nm
5 Ch. 1530/1550/1570/1590nm + 1310nm
Provide scalable bandwidth of up to 20Gbps over
1A453
1 Ch. Add/Drop 1530nm (group 453)
553
existing fiber links
1B453
1 Ch. Add/Drop 1550nm (group 453)
555
5 Ch. 1550/1570/1590/1610nm + 1310nm
”Plug and play,” no configuration of CWDM
components
1C453
1 Ch. Add/Drop 1570nm (group 453)
847
8 Ch. 1470 ~ 1610nm
1D453
1 Ch. Add/Drop 1590nm (group 453)
947
9 Ch. 1470 ~ 1610nm + 1310nm
1A455
1 Ch. Add/Drop 1550nm (group 455)
1B455
1 Ch. Add/Drop 1570nm (group 455)
*Note: 1310nm channel is wideband (+/- 50nm)
1C455
1 Ch. Add/Drop 1590nm (group 455)
Other channel configurations may be available upon request.
Please contact Transition Networks.
1D455
1 Ch. Add/Drop 1610nm (group 455)
1A847
1 Ch. Add/Drop 1470nm (group 847)
1B847
1 Ch. Add/Drop 1490nm (group 847)
Accessory (sold separately)
1C847
1 Ch. Add/Drop 1510nm (group 847)
Examples
CWDM-MB19R1
19” Rack Mount Bracket, 1RU High, holds 2 CWDM Modules
1D847
1 Ch. Add/Drop 1530nm (group 847)
1E847
1 Ch. Add/Drop 1550nm (group 847)
CWDM-M455LCR
CWDM Mux/Demux Module,
4 channel, 1550 nm ~ 1610nm
1F847
1 Ch. Add/Drop 1570nm (group 847)
1G847
1 Ch. Add/Drop 1590nm (group 847)
1H847
1 Ch. Add/Drop 1610nm (group 847)
Use existing standard optical ports on switches and
routers
•Utilize Optical Line Converter as transponder
Lifetime Warranty
CWDM-1D847SCR
CWDM Add/Drop Mux Module,
1 channel drop (1530nm)
pass 1470nm ~ 1510nm &
pass 1500nm ~ 1610nm
Specifications
4 Channel Mux/Demux Specific Optical Specs
Operating Wavelength:
Center Wavelength (λc):
Max Insertion Loss*:
5 Channel Mux/Demux Specific Optical Specs
CWDM Operating Wavelength:
CWDM Center Wavelength (λc):
1310nm Ch. Operating Wavelength:
1310nm Ch. Center Wavelength (λc):
CWDM Max. Insertion Loss*:
1310nm Ch. Max Insertion Loss*:
1310nm Ch. Port Isolation:
Min.(@CWDM bands)
8 Channel Mux/Demux Specific Optical Specs
Operating Wavelength:
Center Wavelength (λc):
Max Insertion Loss*:
9 Channel Mux/Demux Specific Optical Specs
CWDM Operating Wavelength:
CWDM Center Wavelength (λc):
1310nm Ch. Operating Wavelength:
1310nm Ch. Center Wavelength (λc):
CWDM Max. Insertion Loss*:
1310nm Ch. Max Insertion Loss*:
1310nm Ch. Port Isolation:
Min.(@CWDM bands)
1500nm ~ 1620nm
1510nm ~ 1610nm
1.7 dB/channel
1500nm ~ 1620nm
1510nm ~ 1610nm
1260nm ~ 1360nm
1310nm
2.0 dB/channel
1.0 dB/channel
30 dB
1460nm ~ 1620nm
1470nm ~ 1610nm
3.0 dB/channel
1460nm ~ 1620nm
1470nm ~ 1610nm
1260nm ~ 1360nm
1310nm
3.3 dB/channel
1.0 dB/channel
30 dB
*Note: All Insertion Loss values include one connector
pair
Call us at 800-526-9267 or 952-941-7600
1 Channel Add/Drop (4 ch. group) Specific Optical Specs
Operating Wavelength:
Center Wavelength (λc):
Add/Drop Ch. Max Insertion Loss*:
Pass Ch. Max Insertion Loss*:
1500nm ~ 1620nm
1510nm ~ 1610nm
0.7 dB
1.0 dB
1 Channel Add/Drop (8 ch. group) Specific Optical Specs
Operating Wavelength:
Center Wavelength (λc):
Add/Drop Ch. Max Insertion Loss*:
Pass Ch. Max Insertion Loss*:
1460nm ~ 1620nm
1470nm ~ 1610nm
0.7 dB
1.0 dB
General Optical Specs (applies to all CWDM configurations)
CWDM Channel Spacing:
CWDM Channel Passband:
Passband Ripple:
Adjacent Channel Isolation:
Non-adjacent Channel Isolation:
Directivity:
Return Loss:
Polarization Dependent Loss (PDL):
Optical Operating Power:
20nm
-5.5nm < λc < +7.5nm
0.5 dB max.
30 dB min.
40 dB min.
50 dB min.
45 dB min.
0.2 dB max.
300 mW max.
Fiber Type
Corning SMF-28
Dimensions
Module
Width: 8.3" [212 mm]
Depth: 7.6" [192 mm]
Height: 1.7" [43 mm]
Environment
0°C to +70°C operating temperature
-40°C to +85°C storage temperature
Warranty
Lifetime
Rack Mount Bracket
Width: 18.9" [481 mm]
Depth: 1.6" [40 mm]
Height: 1.7" [44 mm]
< 137 >
network interface
cards
Table of Contents
Select Media Converter
Select Switch
Redundant Fast Ethernet 100BASE-FX
Redundant Ethernet Network Interface Cards
Maintain network stability and
reliability with a redundant NIC.
Dual-port NICs provide redundancy
and, if port failure is detected, the
auto-failover feature automatically
transfers network communications
to the secondary port without
disrupting the network. Whether
it’s a desktop solution or network
server, using a redundant NIC with
auto-failover guarantees consistent
reliable network performance.
ND-FX-xx-01
Redundancy
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
ND-FX-ST-01
(2) 100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
ND-FX-SC-01
(2) 100BASE-FX 1300nm MM (SC)
[2 km / 1.2 mi.] Link Budget: 11.0 dB
ND-FX-MT-01
(2) 100BASE-FX 1300nm MM (MT-RJ)
[2 km/1.2 mi.] Link Budget: 14.5 dB
Features
Specifications
LED status indicators monitor Full/Half Duplex,
Collisions, Activity, Port Select, Link Status and
Magic Packet.
See pages 171–181 for complete fiber optic connector specs.
Supported by the latest drivers for a wide variety
of operating systems including Windows 2000,
3.X, 9X & NT; Novell; Banyan; Solaris; Linux; UNIX
and supports most popular LAN protocols.
Standards
IEEE Std. 802.3™ 100BASE-FX
Controls
IRQ and DMA Controlled by PCI Bus
Status LEDs
Supported for Desktop Management Task Force
(DMTF) DMI 2.0 specification and PermaNet for
network servers running Novell Netware or
Microsoft Windows NT.
Full/Half-Duplex
Collision
Activity
Port Select
Link Status
Magic Packet
Dimensions
Fast Ethernet Dual Port
Width: 0.5" [13 mm]
Depth: 5.5" [140 mm]
Height: 3.8" [96 mm]
Power
+5V DC 800mA max.
Standby Power
+5V DC 500mA min.
Environment
0° – 50°C; 5% – 90% humidity noncondensing; 0 – 10,000 ft. altitude
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
FCC Class A Part 15, VCCI Class 1,
EN55022 Class 1
Warranty
Lifetime
Supports PC98/PC99 and Wired for Management
baseline specifications; full OnNow support and
AMD’s Magic Packet technology for remote wake-up
and power-on. Supports Advanced Configuration
and Power Interface (ACPI) specification version 1.0.
< 138 >
Visit our website at www.transition.com
Operation
Operates as a TIA SP4360A Type I, II
device
Table of Contents
Select Media Converter
Select Switch
Fast Ethernet 100BASE-FX
network interface
cards
pci converters
gbic modules
small form factor pluggables
cwdm
N-FX-xx-02(x)
Fast Ethernet Network Interface Cards
network interface cards
pcmcia adapter cards
The Fast Ethernet NIC provides a 100BASE-FX fiber
port and delivers low cost, fiber optic connectivity to
the desktop in fiber rich LAN environments. With
both standard and low profile form factors; driver
support for most popular operating systems; and
PCI 2.2 plug-and-play capability; installation is a
breeze in virtually any PC in your network.
100BASE-FX
Features
Lifetime Warranty
32-bit bus master
Supports 802.1P/Q VLAN tag
IP multicast filter
PCI 2.1 and 2.2 compliant
Wake-On-LAN (WOL) power management
Product Number
(standard profile)
Product Number
(standard profile
20-pack)
Product Number
(low profile)
Product Number
(low profile 20-pack)
Both standard and low profile form factors
N-FX-ST-02
N-FX-ST-02-020
N-FX-ST-02(L)
N-FX-ST-02(L)-020
N-FX-SC-02
N-FX-SC-02-020
N-FX-SC-02(L)
N-FX-SC-02(L)-020
N-FX-MT-02
N-FX-MT-02-020
N-FX-MT-02(L)
N-FX-MT-02(L)-020
N-FX-LC-02
N-FX-LC-02-020
N-FX-LC-02(L)
N-FX-LC-02(L)-020
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™ 2000
IEEE Std. 802.1P
IEEE Std. 802.1Q
N-FX-SC5-02
N-FX-SC5-02(L)
N-FX-SC20-02
N-FX-SC20-02(L)
Expansion Bus Standard PCI 2.1, 2.2
Single Fiber Products
Status LEDs
LINK/ACT (Link/Activity):
ON = communication link;
FLASHING = activity on link
FDX (Full-duplex):
ON = Full-duplex link
N-FX-SB201-02
N-FX-SB201-02(L)
N-FX-SB202-02
N-FX-SB202-02(L)
Windows 95, 98 ME, 2000, 2003,
XP, NT 4.0, VISTA
NDIS 2,3,4,5
NetWare Server 3.12, 4.x, 5.x, 6.x
NetWare DOS Client ODI
MAC OS
Linux x86 Kernel 2.2.x ~ 2.6.x
Linux AMD64 Kernel 2.4.x ~ 2.6.x
FreeBSD 3.2, 4.x, 5.x
SCO Unixware 7.1, OpenUnix 8
SCO Open Server 5.0.x
Solaris 8, 9, 10
Bundled Products
LAN Drivers
Boot Server Support
PXE
RPL
NetWare NCP/IPX
DHCP
BOOTP
PCB Dimensions
Width: 2.2" [56 mm]
Depth: 4.8" [122 mm]
Height: 0.9" [23 mm]
Power
1.0A @ +5V
Environment
0° – 50°C; 5% – 95% humidity noncondensing; 0 – 10,000 ft. altitude
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
FCC Class B Part 15, CE Mark
Warranty
Lifetime
Call us at 800-526-9267 or 952-941-7600
Description
100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 12.0 dB
100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 12.0 dB
100BASE-FX 1300nm MM (MT-RJ)
[2 km/1.2 mi.] Link Budget: 12.0 dB
100BASE-FX 1300nm MM (LC)
[2 km/1.2 mi.] Link Budget: 12.0 dB
100BASE-FX 1310nm SM (SC)
[5 km/3.1 mi.] Link Budget: 12.0 dB
100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
100BASE-FX 1310nm / 1550nm
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 18.0 dB
100BASE-FX 1550nm / 1310nm
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 18.0 dB
N-FX-ST-02F
(includes extra low profile bracket and Boot ROM is installed)
100BASE-FX 1300nm MM (ST)
[2 km/1.2 miles] Link Budget: 12.0 dB
N-FX-SC-02F
(includes extra low profile bracket and Boot ROM is installed)
100BASE-FX 1300nm MM (SC)
[2 km/1.2 miles] Link Budget: 12.0 dB
Optional Accessories (sold separately)
Product Number
Description
BTR-NFX
Boot ROM chip supporting both BBS (BIOS Boot Specification) and non-BBS compliant PCs
< 139 >
network interface
cards
Table of Contents
Select Media Converter
Select Switch
Fast Ethernet 10/100BASE-TX + 100BASE-FX
NDM-FTX-xx-01(x)
Dual Media Network Interface Cards
The Fast Ethernet Dual Media NIC provides both a
10/100BASE-TX copper port and a 100BASE-FX
fiber port to allow ultimate flexibility for installation
in both new and legacy LAN environments. With
both standard and low profile form factors, driver
support for most popular operating systems and
PCI 2.2 plug-and-play capability helps make
installation a breeze in virtually any PC in your
network.
Application
Features
Lifetime Warranty
32-bit bus master
Supports 802.1P/Q VLAN tag
IP multicast filter
PCI 2.1 and 2.2 compliant
Wake-On-LAN (WOL) power management
Both standard and low profile form factors
Product Number
(standard profile)
Product Number
(standard profile
20-pack)
Product Number
(low profile)
Product Number
(low profile 20-pack)
NDM-FTX-ST-01
NDM-FTX-ST-01-020
NDM-FTX-ST-01(L)
NDM-FTX-ST-01(L)-020
NDM-FTX-SC-01
NDM-FTX-SC-01-020
NDM-FTX-MT-01
NDM-FTX-MT-01-020
NDM-FTX-SC5-01
NDM-FTX-SC5-01-020
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™
IEEE Std 802.1P
IEEE Std 802.1Q
Expansion Bus Standard PCI 2.1, 2.2
Status LEDs
LINK/ACT (Link/Activity):
ON = communication link;
FLASHING = activity on link
FDX (Full-duplex):
ON = Full-duplex link
LAN Drivers
NetWare Server 4.1x, 5.X
NetWare DOS Client ODI
Windows 95, 98, ME, 2000, 2003,
XP, NT 4.0
Linux
Boot Server Support
Novell RPL Boot ROM
PXE Boot ROM
PCB Dimensions
Width: 4.8" [122 mm]
Depth: 7.1" [180 mm]
Height: 0.9" [23 mm]
Power
1.0A @ +5V
Environment
0° – 50°C; 5% – 95% humidity noncondensing; 0 – 10,000 ft. altitude
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
FCC Part 15 Class A, CE Mark
Warranty
Lifetime
< 140 >
NDM-FTX-SC20-01
Description
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 12.0 dB
NDM-FTX-SC-01(L) NDM-FTX-SC-01(L)-020 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 12.0 dB
NDM-FTX-MT-01(L) NDM-FTX-MT-01(L)-020 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
100BASE-FX 1300nm MM (MT-RJ)
[2 km/1.2 mi.] Link Budget: 12.0 dB
NDM-FTX-SC5-01(L) NDM-FTX-SC5-01(L)-020 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
100BASE-FX 1310nm SM (SC)
[5 km/3.1 mi.] Link Budget: 12.0 dB
NDM-FTX-SC20-01(L)
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Single Fiber Products
NDM-FTX-SB201-01
NDM-FTX-SB201-01(L)
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
100BASE-FX 1310nm / 1550nm
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 18.0 dB
NDM-FTX-SB202-01
NDM-FTX-SB202-01(L)
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
100BASE-FX 1550nm / 1310nm
single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 18.0 dB
Optional Accessories (sold separately)
Product Number
Description
BTR-NDM-PXE
PXE Boot ROM
BTR-NDM-RPL
RPL Boot ROM
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
Gigabit Ethernet 1000BASE-SX/LX
network interface
cards
pci converters
gbic modules
small form factor pluggables
cwdm
N-GxX-xx-01(x)
Gigabit Ethernet Network Interface Cards
network interface cards
pcmcia adapter cards
The Gigabit Ethernet NIC provides a 1000BASE-SX/LX fiber
port to deliver fiber optic connectivity to the desktop in fiber
rich LAN environments. With both standard and low profile
form factors, driver support for most popular operating
systems and PCI 2.2 plug-and-play capability helps make
installation a breeze in virtually any PC in your network.
Application
Features
Lifetime Warranty
Supports 32/64-bit PCI 2.2 bus
Supports 802.1P/Q VLAN tag
Full-duplex flow control
Plug-and-Play auto-configuration
TCP, UDP & IP checksum off-loading
Product Number
(standard profile)
Product Number
(standard profile
20-pack)
Product Number
(low profile)
Product Number
(low profile 20-pack)
N-GSX-SC-01
N-GSX-SC-01-020
N-GSX-SC-01(L)
N-GSX-SC-01(L)-020
1000BASE-SX 850nm MM (SC)
[62.5/125µm: 220 m / 722 ft.]
[50/125µm: 550 m / 1804 ft.]
Link Budget: 8.5 dB
N-GSX-LC-01
N-GSX-LC-01-020
N-GSX-LC-01(L)
N-GSX-LC-01(L)-020
1000BASE-SX 850nm MM (LC)
[62.5/125µm: 220 m / 722 ft.]
[50/125µm: 550 m / 1804 ft.]
Link Budget: 8.5 dB
Supports jumbo frames up to 9KB
Both standard and low profile form factors
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
Description
N-GLX-SC-01
N-GLX-SC-01(L)
1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 10.5 dB
N-GLX-LC-01
N-GLX-LC-01(L)
1000BASE-LX 1310nm SM (LC)
[10 km/6.2 mi.] Link Budget: 10.5 dB
Optional Accessories (sold separately)
Product Number
Description
BTR-NGX-PXE
PXE Boot ROM
IEEE Std. 802.3™
IEEE Std. 802.1P
IEEE Std. 802.1Q
Expansion Bus Standard PCI 2.2 bus 32/64-bit, 33/66MHz
Status LEDs
LINK/ACT (Link/Activity):
ON = communication link;
FLASHING = activity on link
FDX (Full-duplex):
ON = Full-duplex link
LAN Drivers
NetWare Server 4.x, 5.x, 6.x
NetWare DOS Client ODI
Windows 98, ME, 2000, 2003, XP,
NT 4.0, VISTA
Linux
SCO UnixWare 7.1.x
OpenUnix 8.0
Boot Server Support
PXE Boot ROM (optional)
PCB Dimensions
Width: 2.2" [56 mm]
Depth: 6.5" [165 mm]
Height: 0.9" [23 mm]
Power
2.0A @ +5V
Environment
0° – 50°C; 5% – 95% humidity noncondensing; 0 – 10,000 ft. altitude
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
FCC Class B Part 15, CE Mark
Warranty
Lifetime
Call us at 800-526-9267 or 952-941-7600
< 141 >
pcmcia
fiber adapters
Table of Contents
Select Media Converter
Select Switch
Fast Ethernet 100BASE-FX
PCMxx-FX-xx-01
Fast Ethernet PCMCIA Fiber Adapter Cards
Fast Ethernet PCMCIA cards provide a 100BASE-FX fiber
port to deliver fiber optic connectivity to the laptop in
high-security, fiber rich LAN environments. They are
offered in either 16-bit PC Card or high-performance 32bit CardBus versions to match virtually any laptop PC and
help save money by eliminating the need for a docking
station and a fixed, fiber NIC.
Application
Ordering Info
See pages 171–181 for complete fiber
optic connector specs.
PCM16-FX-ST-01 (16-bit PC Card)
PCM32-FX-ST-01 (32-bit PC CardBus)
100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 12.0 dB
Features
PCM16-FX-SC-01 (16-bit PC Card)
PCM32-FX-SC-01 (32-bit PC CardBus)
100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 12.0 dB
Lifetime Warranty
32-bit CardBus or 16-bit PC card option
Dongle-less fiber connection
for fiber to the
notebook applications in either high security or high
bandwidth LAN environments
Flow control and full/half duplex (32-bit)
PCMCIA Type II compliant
PCM16-FX-LC-01 (16-bit PC Card)
PCM32-FX-LC-01 (32-bit PC CardBus)
100BASE-FX 1300nm MM (LC)
[2 km/1.2 mi.] Link Budget: 12.0 dB
Specifications
See pages 171–181 for complete fiber optic connector specs.
Standards
IEEE Std. 802.3™
PCMCIA Type II CardBus
PCMCIA Release 2.x
JEIDA 4.x
Card Slot
PC Card 68-pin connector to PC
Status LEDs
PCM16-FX-xx-01:
LINK: On = communication link; ACT:
Flashing = collisions occurring
Diagnostic LEDs
PCM32-FX-xx-01:
LINK/ACT: On = communication link;
Flashing = activity on link
FDX/COL: On = full duplex link;
Flashing = collisions occurring
LAN Drivers
PCM16-FX-xx-01:
NetWare 3.x, 4.0
NetWare DOS Client ODI
Windows 95, 98, ME, 2000, XP, NT
4.0
PCM32-FX-xx-01:
NetWare 3.x, 4.0
NetWare DOS Client ODI
Windows 95, 98, ME, 2000, XP, NT
3.51, NT 4.0
Windows for Workgroup 3.1/3.11
Linux
Dimensions
< 142 >
Visit our website at www.transition.com
Width: 2.1" [54 mm]
Depth: 4.7" [120 mm]
Height: 0.6" [16 mm]
Power
0.7A @ +5V max.
Environment
0° – 50°C; 5% – 95% humidity noncondensing; 0 – 10,000 ft. altitude
Shipping Weight
1 lb. [0.45 kg]
Compliance
FCC Class A Part 15, CE Mark
Warranty
Lifetime
PCM16-FX-SC5-01 (16-bit PC Card)
PCM32-FX-SC5-01 (32-bit PC CardBus)
100BASE-FX 1310nm SM (SC)
[5 km/3.1 mi.] Link Budget: 12.0 dB
PCM16-FX-SC20-01 (16-bit PC Card)
PCM32-FX-SC20-01 (32-bit PC CardBus)
100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
MILAN
managed switches
Table of Contents
Select Media Converter
Select Switch
8-port 10/100 Layer 2 Managed Switch
8-port 10/100BASE-TX
Auto MDI-MDIX
Non-blocking architecture for full
wire speed performance
IGMP/GVRP
Store and forward architecture
IEEE802.1q VLAN tagging
IEEE802.1p Class of service
Internal Power Supply
10/100 copper
MIL-SM800P
(8) 10/100 ports
10/100 with fiber
10/100/1000 with fiber
Port Mirroring
8K MAC Address
Telnet/ Web-Based management
TFTP Firmware Upgrade
Features
Non-blocking full wire speed performance
Store-and-forward architecture
10-inch design for desktop or rackmount
Static MAC addresses for secure network
Backpressure and flow control
Console port on rear panel
Conforms to IEEE 802.3, 802.3u, and 802.3x
Ethernet Standards
Automatic MDI/MDIX crossover for each
10Base-T/100Base-TX port
LED indicators for Power, 100M, LK/ACT, FD/COL
Management interface: Console port, Web-based
GUI, Telnet and SNMP
VLANs: Supports port based VLAN, up to 256
Groups, and Compatible IEEE 802.1Q VLAN Tagging,
VLAN Tagging ID up to 4094
Port Mirroring: Supports source-port-based,
destination-port-based and source-destination-port
mirroring
Spanning Tree: Insures only one path between
any two nodes on network
Broadcast Storm Filtering: Only allows a
percentage of port’s total bandwidth before
broadcast traffic is dropped
Scheduling schemes: Packets can be transmitted
by different priority schemes; FIFO, WRR with Enable
Delay Bound, All High before Low
Trunking: Supports 802.3ad port trunking with
flexible load distribution with 800Mbps aggregate
bandwidth per trunk group
VLAN Options: Supports VLAN tagging, 802.1Q,
port based VLANs, overlapping VLANs
Class of Service: Supports 802.1p Class of
service with 2-level priority queuing
IGMP, GVRP: IGMP support to reduce IP
multicast traffic for the multimedia applications,
support for Group VLAN Resolution Protocol
The MIL-SM800P series of layer 2 managed
switches provides high performance non-blocking
switching. The switch has (8) 10/100 autoMDI/MDIX ports.
Ordering Info
MIL-SM800P
8-port 10/100 switch
Management features include port based, dynamic
and static VLANs, GVRP, VLAN tagging, IGMP
Snooping, port mirroring, and port security. Security
includes static addressing, filtering and blocking of
packets to identified MAC addresses. Two priority
queues per port insure minimum delay for voice over
IP or multimedia network data. Console port
provides local management while Telnet and Webbased management is provided via any network
device.
Non-blocking architecture assures rapid packet
delivery while 8,000 MAC address table provides
swift lookup and packet forwarding.
Other ASIC features that enhance performance are
included such as 802.1d spanning tree, 802.3x flow
control, 802.3ad link aggregation and broadcast
storm control.
Specifications
Standards
• IEEE802.3 10BASE-T 10Mbps, Half/Full Duplex
• IEEE802.3u 100BASE-TX, 10/100Mbps, Half/Full Duplex
• IEEE802.3x Flow control and Back-pressure
• IEEE802.3ad Link Aggregation
• IEEE802.1Q VLAN Tagging
• IEEE802.1p Class of service
• IEEE802.1d Spanning Tree Protocol
MAC Address Table
8K with Auto-learning function
Packet Buffer
2MBits
Back-plane bandwidth
Up to 3.8 Gbps
System throughput
2.67 Mpps packet per second on fullduplex mode
Voltage
100~240VAC
Frequency
50/60HZ
Power Consumption
17W
Operation Temperature
0° to 45°C (32° to 113°F)
Operation Humidity
10% to 90% (non-condensing)
Dimensions
Width: 10.0" [250 mm]
Depth: 5.25" [132 mm]
Height: 1.75" [37.5 mm]
Weight
2.0 lbs 6 oz.
Emissions & Safety
FCC Class A, CE Mark, UL listed
Technical Support & Warranty
Free technical support and advanced warranty support
for 5 years. Includes free telephone support, 24-hour
support via web and ftp.
Call us at 800-526-9267 or 952-941-7600
< 143 >
MILAN
managed switches
8-port 10/100 Layer 2 Managed Switch with 100BASE-FX uplink port
MIL-SM801P(xx)
(8) 10/100 ports + (1) 100BASE-FX port
8-port 10/100BASE-TX
IGMP/GVRP
Non-blocking architecture for full
wire speed performance
Port Mirroring
IEEE802.1q VLAN tagging
IEEE802.1p Class of service
Auto MDI-MDIX
Internal Power Supply
8K MAC Address
Telnet/ Web-Based management
TFTP Firmware Upgrade
(1) 100Mbps fiber port
Features
Non-blocking full wire speed performance
Store-and-forward architecture
10-inch design for desktop or rackmount
Static MAC addresses for secure network
Backpressure and flow control
Console port on rear panel
Conforms to IEEE 802.3, 802.3u, and 802.3x
Ethernet Standards
Automatic MDI/MDIX crossover for each
10Base-T/100Base-TX port
LED indicators for Power, 100M, LK/ACT, FD/COL
Management interface: Console port, Web-based
GUI, Telnet and SNMP
VLANs: Supports port based VLAN, up to 256
Groups, and Compatible IEEE 802.1Q VLAN Tagging,
VLAN Tagging ID up to 4094
Port Mirroring: Supports source-port-based,
destination-port-based and source-destination-port
mirroring
Spanning Tree: Insures only one path between
any two nodes on network
Broadcast Storm Filtering: Only allows a
percentage of port’s total bandwidth before
broadcast traffic is dropped
The MIL-SM801P series of layer 2 managed
switches provides high performance non-blocking
switching. The switch has (8) 10/100 autoMDI/MDIX ports and one fixed 100Mbps fiber port.
Management features include port based, dynamic
and static VLANs, GVRP, VLAN tagging, IGMP
Snooping, port mirroring, and port security. Security
includes static addressing, filtering and blocking of
packets to identified MAC addresses. Two priority
queues per port insure minimum delay for voice over
IP or multimedia network data. Console port
provides local management while Telnet and Webbased management is provided via any network
device.
Non-blocking architecture assures rapid packet
delivery while 8,000 MAC address table provides
swift lookup and packet forwarding.
Other ASIC features that enhance performance are
included such as 802.1d spanning tree, 802.3x flow
control, 802.3ad link aggregation and broadcast
storm control.
Specifications
Standards
• IEEE802.3 10BASE-T 10Mbps, Half/Full Duplex
• IEEE802.3u 100BASE-TX, 10/100Mbps, Half/Full Duplex
• IEEE802.3x Flow control and Back-pressure
• IEEE802.3ad Link Aggregation
• IEEE802.1Q VLAN Tagging
• IEEE802.1p Class of service
• IEEE802.1d Spanning Tree Protocol
Scheduling schemes: Packets can be transmitted
by different priority schemes; FIFO, WRR with Enable
Delay Bound, All High before Low
MAC Address Table
8K with Auto-learning function
Packet Buffer
2MBits
Back-plane bandwidth
Up to 3.8 Gbps
Trunking: Supports 802.3ad port trunking with
flexible load distribution with 800Mbps aggregate
bandwidth per trunk group
System throughput
2.67 Mpps packet per second on fullduplex mode
Voltage
100~240VAC
Frequency
50/60HZ
VLAN Options: Supports VLAN tagging, 802.1Q,
port based VLANs, overlapping VLANs
Power Consumption
17W
Operation Temperature
0° to 45°C (32° to 113°F)
Class of Service: Supports 802.1p Class of
service with 2-level priority queuing
Operation Humidity
10% to 90% (non-condensing)
Dimensions
Width: 10.0" [250 mm]
Depth: 5.25" [132 mm]
Height: 1.75" [37.5 mm]
IGMP, GVRP: IGMP support to reduce IP
multicast traffic for the multimedia applications,
support for Group VLAN Resolution Protocol
< 144 >
Table of Contents
Select Media Converter
Select Switch
Visit our website at www.transition.com
Weight
2.0 lbs 6 oz.
Emissions & Safety
FCC Class A, CE Mark, UL listed
Technical Support & Warranty
Free technical support and advanced warranty support
for 5 years. Includes free telephone support, 24-hour
support via web and ftp.
Ordering Info
MIL-SM801PST
8-port 10/100 switch plus
(1) 100BASE-FX MM (ST)
[2 km/1.2 miles]
MIL-SM801PSC
8-port 10/100 switch plus
(1) 100BASE-FX MM (SC)
[2 km/1.2 miles]
MIL-SM801PSC-15
8-port 10/100 switch plus
(1) 100BASE-FX SM (SC)
[15 km/9.5 miles]
MILAN
managed switches
8-port 10/100 Layer 2 Managed Switch with Gigabit uplink port
MIL-SM801G
(8) 10/100 ports + (1) 1000BASE-SX port
8-port 10/100BASE-TX
IGMP/GVRP
1 Gigabit fiber port
Port Mirroring
Non-blocking architecture
8K MAC Address
IEEE802.1q VLAN tagging
Telnet/ Web-Based management
IEEE802.1p Class of service
TFTP Firmware Upgrade
Auto MDI-MDIX
Internal Power Supply
Features
Non-blocking full wire speed performance
Store-and-forward architecture
10-inch design for desktop or rackmount
Static MAC addresses for secure network
Backpressure and flow control
Console port on rear panel
Conforms to IEEE 802.3, 802.3u, and 802.3x
Ethernet Standards
Automatic MDI/MDIX crossover for each
10Base-T/100Base-TX port
One fixed 1000BASE-SX port
LED indicators for Power, 100M, LK/ACT, FD/COL
DHCP auto-provisioning for group firmware and
configuration upgrade using DHCP option
60,66 & 67
Table of Contents
Select Media Converter
Select Switch
10/100 copper
10/100 with fiber
10/100/1000 with fiber
The MIL-SM801G series of layer 2 managed
switches provides high performance non-blocking
switching. The switch has (8) 10/100 autoMDI/MDIX ports and one fixed 1000Mbps fiber port.
Management features include port based, dynamic
and static VLANs, GVRP, VLAN tagging, IGMP
Snooping, port mirroring, and port security. Security
includes static addressing, filtering and blocking of
packets to identified MAC addresses. Two priority
queues per port insure minimum delay for voice over
IP or multimedia network data. Console port
provides local management while Telnet and Webbased management is provided via any network
device.
Ordering Info
MIL-SM801G
8-port 10/100 switch plus
(1) 1000BASE-SX 850nm MM (SC)
[62.5/125µm fiber: 220 m / 722 ft.]
[50/125µm fiber: 550 m / 1804 ft.]
MIL-SM801GLX-10
8-port 10/100 switch plus
(1) 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 miles]
Non-blocking architecture assures rapid packet
delivery while 8,000 MAC address table provides
swift lookup and packet forwarding.
Other ASIC features that enhance performance are
included such as 802.1d spanning tree, 802.3x flow
control, 802.3ad link aggregation and broadcast
storm control.
Management interface: Console port, Web-based
GUI, Telnet and SNMP
VLANs: Supports port based VLAN, up to 256
Groups, and Compatible IEEE 802.1Q VLAN Tagging,
VLAN Tagging ID up to 4094
Port Mirroring: Supports source-port-based,
destination-port-based and source-destination-port
mirroring
Spanning Tree: Insures only one path between
any two nodes on network
Broadcast Storm Filtering: Only allows a
percentage of port’s total bandwidth before
broadcast traffic is dropped
Scheduling schemes: Packets can be transmitted
by different priority schemes; FIFO, WRR, with
Enable Delay Bound, All High before Low
Trunking: Supports 802.3ad port trunking with
flexible load distribution with 800Mbps aggregate
bandwidth per trunk group
VLAN Options: Supports VLAN tagging, 802.1Q,
port based VLANs, overlapping VLANs
Class of Service: Supports 802.1p Class of
service with 2-level priority queuing
IGMP, GVRP: IGMP support to reduce IP
multicast traffic for the multimedia applications,
support for Group VLAN Resolution Protocol
Call us at 800-526-9267 or 952-941-7600
Specifications
Standards
• IEEE802.3 10BASE-T 10Mbps, Half/Full Duplex
• IEEE802.3u 100BASE-TX, 10/100Mbps, Half/Full Duplex
• IEEE802.3z Gigabit SX/LX 1000Mbps
• IEEE802.3ab Gigabit 1000T 10/100/1000Mbps
• IEEE802.3x Flow control and Back-pressure
• IEEE802.3ad Link Aggregation
• IEEE802.1Q VLAN Tagging
• IEEE802.1p Class of service
• IEEE802.1d Spanning Tree Protocol
MAC Address Table
8K with Auto-learning function
Packet Buffer
2MBits
Back-plane bandwidth
Up to 3.8 Gbps
System throughput
2.67 Mpps packet per second on fullduplex mode
Voltage
100~240VAC
Frequency
50/60HZ
Power Consumption
19W
Operation Temperature
0° to 45°C (32° to 113°F)
Operation Humidity
10% to 90% (non-condensing)
Dimensions
Width: 10.0" [250 mm]
Depth: 5.25" [132 mm]
Height: 1.75" [37.5 mm]
Weight
2.0 lbs 6 oz.
Emissions & Safety
FCC Class A, CE Mark, UL listed
Technical Support & Warranty
Free technical support and advanced warranty support
for 5 years. Includes free telephone support, 24-hour
support via web and ftp.
< 145 >
MILAN
managed switches
8-port 100BASE-FX Layer 2 Managed Switch with SFP uplink port
MIL-SM808GP(xx)
(8) 100BASE-FX ports + (1) SFP port
High Back-plane Bandwidth
5.6 Gbps
IEEE802.1Q VLAN tagging
IEEE802.1P Class of service
Port, Protocol, Tagged VLANs and
GVRP support
Internal Power Supply
IGMP Query and IGMP Snooping
Port Mirroring /Port Security
NEW
Web-GUI/ Console/Telnet/SNMP
Management
TFTP Firmware Upgrade
SFP Port
Features
Non-blocking full speed performance
Store-and-forward, shared memory architecture
Designed for desktop or rackmount
Static MAC addresses and MAC filtering for secure
networks
Backpressure and flow control
Serial console port for out of band management
Conforms to IEEE 802.1D, 802.3u/z/ab Ethernet
Standards
LED indicators for Power, 100M, LK/ACT, FD/COL
Management interface: Console port, Web-based
GUI, Telnet and SNMP
VLANs: Supports port based or protocol based
VLANs, up to 256 Groups, and IEEE 802.1Q VLAN
Tagging, VLAN Tagging ID up to 4094
Port Mirroring: Supports source-port-based,
destination-port-based and source-destination-port
mirroring of transmit, receive or bi-directional data.
Spanning Tree: Insures only one path between
any two nodes on network
Broadcast Storm Filtering: Only allows a
percentage of port’s total bandwidth before
broadcast traffic is dropped
Scheduling schemes: Packets can be transmitted
by different priority schemes; FIFO, WRR with Enable
Delay Bound, All High before Low
Trunking: Supports 802.3ad port trunking with
flexible load distribution with 800Mbps aggregate
bandwidth per trunk group
VLAN Options: Supports VLAN tagging, 802.1Q,
port based VLANs, overlapping VLANs
Class of Service: Supports 802.1p Class of
service with 2-level priority queuing
IGMP: Query modes for flat Layer 2 environments
needing multicast traffic limiting and IGMP snooping
mode to limit traffic to specific ports within VLANs.
GVRP: Support for Group VLAN Resolution
Protocol dynamic join and leave of IEEE 802.1Q
VLAN types.
< 146 >
Table of Contents
Select Media Converter
Select Switch
Visit our website at www.transition.com
The MIL-SM808G series of layer 2 managed
switches provides high performance non-blocking
switching. The switch has (8) 100BASE-FX ports and
one fixed SFP port. This is the ideal switch for
aggregating remote classroom or workgroup
switches.
Management features include port based, dynamic
and static VLANs, GVRP, VLAN tagging, IGMP
Snooping, port mirroring, and port security. Security
includes static addressing, filtering and blocking of
packets to identified MAC addresses. Two priority
queues with selection of queue management, insure
minimum delay for voice over IP or multimedia
network data. Console port provides local
management while Telnet and Web-based
management is provided via any network device.
Non-blocking 5.6Gbps, store and forward, shared
memory architecture assures rapid packet delivery
while 8,000 MAC address table provides swift lookup
and packet forwarding.
Other ASIC features that enhance performance are
included such as 802.1d spanning tree, 802.3x flow
control, 802.3ad link aggregation and broadcast
storm control.
Specifications
Standards
• IEEE802.3u 100BASE-FX
• IEEE802.3z Gigabit SX/LX 1000Mbps
• IEEE802.3ab Gigabit 1000T 10/100/1000Mbps
• IEEE802.3x Flow control and Back-pressure
• IEEE802.3ad Link Aggregation
• IEEE802.1Q VLAN Tagging
• IEEE802.1p Class of service
• IEEE802.1d Spanning Tree Protocol
MAC Address Table
8K with Auto-learning function
Packet Buffer
2MBits
Back-plane bandwidth
5.6 Gbps
System throughput
148,800 pps for 100Mbps
1,488,000pps for Gigabit
Voltage
100~240VAC
Frequency
50/60HZ
Power Consumption
17W Maximum
Operation Temperature
0° to 45°C (32° to 113°F)
Operation Humidity
10% to 90% (non-condensing)
Dimensions
Width: 17.6" [250 mm]
Depth: 6.4" [160 mm]
Height: 1.75" [44 mm]
Weight
2.0 lbs. 6 oz.
Emissions & Safety
FCC Class A, CE Mark, UL listed
Technical Support & Warranty
Free technical support and advanced warranty support
for 5 years. Includes free telephone support, 24-hour
support via web and ftp.
Ordering Info
MIL-SM808GPST
8-port 100BASE-FX switch
multimode (ST) [2 km/1.2 miles]
plus (1) SFP port
MIL-SM808GPSC
8-port 100BASE-FX switch
multimode (SC) [2 km/1.2 miles]
plus (1) SFP port
MIL-SM808GPSC-15
8-port 100BASE-FX switch
single mode (SC) [15 km/9.5 miles]
plus (1) SFP port
MIL-SM808GPSC-60
8-port 100BASE-FX switch
single mode (SC) [60 km/37.3 miles]
plus (1) SFP port
Optional Accessories
(sold separately)
SFP Modules (see pages 135-136)
24-port 10/100 Layer 2 Stackable Managed Switch
MILAN
managed switches
(24) 10/100 ports + (1) slot for Dual-Port Modules
Manage through the master
Simplify deployment with built-
switch up to a stack of 8 switches
in DHCP Client protocol
Built-in IEEE 802.1X
Authentication using a centralized
RADIUS server
Supports Bandwidth
Provisioning and rate monitoring
MIL-SM2401M-STK
with Dual-Port
uplink modules
10/100 copper
10/100 with fiber
10/100/1000 with fiber
Internal Power Supply
Table of Contents
Select Media Converter
Select Switch
LED indicators provide real-
time status
High Performance Non-blocking Switch with
Advanced Features
24 Auto-sensing 10/100 Auto MDI/MDI-X ports
Dual port module bay for 100Mbps or 1000Mbps fiber
or copper ports
Non-blocking full wire speed performance
Store-and-forward architecture
1 U high 19 inch rack mount design
IEEE 802.1X support for centralized authentication or
static MAC address filters for limiting network access.
Backpressure and flow control
Console port, Telnet, SNMP or Web-based GUI
Management
Conforms to IEEE 802.3, 802.3u, and 802.3x Standards
Automatic MDI/MDIX crossover for each 10/100 port
IP Stacking. The IP stacking function allows up to eight
MIL-SM2401M-STK switches to be joined as a single unit
group. The stackable switches can then be managed
through a single IP address.
Specifications
Standards Compliance
IEEE802.3 10BASE-T 10Mbps,
Half/Full Duplex
IEEE802.3u 100BASE-TX,
10/100Mbps, Half/Full Duplex
IEEE802.3z Gigabit SX/LX 1000Mbps
IEEE802.3ab Gigabit 1000T
10/100/1000Mbps
IEEE802.3x Flow control and Backpressure
IEEE802.3ad Link Aggregation
IEEE802.1Q VLAN Tagging
IEEE802.1q Quality of Service
IEEE802.1p Class of service
IEEE802.1d Spanning Tree Protocol
IEEE802.1w Rapid Spanning Tree
IEEE802.1x EAP Authentication
MAC Address Table
8K with Auto-learning function
Packet Buffer
3Mb
Backplane bandwidth
8.8 Gbps
System throughput
Wire speed 6.5 Mpps
Voltage
100 – 240 VAC
Frequency
50/60 HZ
Power Consumption
34W Maximum
Operating Temperature
32° to 104° F (0° to 40° C)
Relative Humidity
10% to 90% non-condensing
Dimensions
Width: 17.4" [440 mm]
Depth: 9.15" [225 mm]
Height: 1.75" [44.5 mm]
Weight
6 lbs. 8 oz.
Emissions & Safety
FCC Class A, CE Mark, UL listed
Technical Support & Warranty
Free technical support and advanced warranty support
for 5 years. Includes free telephone support, 24-hour
support via web and ftp.
Call us at 800-526-9267 or 952-941-7600
Features
The MIL-SM2401M-STK series of layer 2 stackable
managed switches provides high performance nonblocking switching. The switch has (24) 10/100 auto
MDI/MDIX parts and (1) expansion slot. This is an ideal
switch for workgroup, department, or backbone computing
environments.
Management Features include Port-based, dynamic and
static VLANs, GVRP, VLAN tagging, IGMP Snooping, Port
Mirroring, Port Security. Security includes static
addressing, filtering and blocking of packets to identified
MAC addresses and IEEE 802.1X authentication utilizing a
centralized RADIUS server. Two priority queues per port
insure minimum delay for voice over IP or multimedia
network data. The bandwidth rate limiting feature allows for
selecting different limits in each direction down to 100
Kbps and in 100 Kbps increments. Console port provides
local management while Telnet and Web-base management
is provided via any network device. Our private MIB allows
for configuring and management from any SNMP Manager.
Non-blocking 8.8Gbps architecture assures rapid packet
delivery while 8K MAC address table provides swift lookup
and packet forwarding. ASIC based counters make SNMP
management highly reliable and accurate.
Management Interface Console port, WEB Browser
Interface, Telnet and Simple Network Management Protocol
(SNMP)
VLANs Supports port or protocol based VLANs, up to
2,048 Groups, and Compatible IEEE802.1Q VLAN Tagging,
VLAN Tagging ID up to 4094 with GVRP for automatic
connection to other parts of the network.
Port Mirroring Supports source-port based,
destination-port-based and source-destination-port
mirroring
Spanning Tree Insures only one path between any two
nodes on network
Broadcast Storm Monitoring and Filtering Only allows a
percentage of port’s total bandwidth before broadcast
traffic is dropped
Ordering Info
MIL-SM2401M-STK
24-port 10/100 Stackable Managed
Switch with 1 slot for Dual-Port
Modules
Dual-Port Modules:
(sold separately)
MIL-M24-02ST
(2) port 100BASE-FX 1300nm MM
(ST) [2 km/1.2 miles]
MIL-M24-02SC
(2) port 100BASE-FX 1300nm MM
(SC) [2 km/1.2 miles]
MIL-M24-02SC-15
(2) port 100BASE-FX 1310nm SM (SC)
[15 km/9.5 miles]
MIL-M24-02SC-30
(2) port 100BASE-FX 1310nm SM (SC)
[30 km/18.6 miles]
MIL-M24-02SC-60
(2) port 100BASE-FX 1310nm SM (SC)
[60 km/37.3 miles]
MIL-M24-20GB
(2) GBIC slots (empty)
MIL-M24-20SC
(2) port 1000BASE-SX 850nm MM
(SC) [62.5/125µm fiber: 220 m/722 ft.]
[50/125µm fiber: 550 m/1804 ft.]
MIL-M24-20SC-10
(2) port 1000BASE-LX 1310nm SM
(SC) [10 km/6.2 miles]
MIL-M24-20TC
(1) port 1000BASE-T (RJ-45)
[100 m/328 ft.]
(1) 1000BASE-SX 850nm MM (SC)
[62.5/125µm fiber: 220 m/722 ft.]
[50/125µm fiber: 550 m/1804 ft.]
MIL-M24-02T
(2) port 1000BASE-T (RJ-45)
[100 m/328 ft.]
Bandwidth rate limiting Selectively set ingress and
egress rate limiting on a per port basis in 100 Kbps
increments starting at 100 Kbps.
Queue scheduling schemes Packets can be transmitted
by different priority schemes; FIFO, WRR, with Enable
Delay Bound, All High before Low
Link Aggregation Supports 802.3ad port trunking with
flexible load distribution with 4 ports per trunk group
Class of Service Supports 802.1p Class of service with
2-level priority queuing
IGMP Groom multicast traffic to the ports needing it
with IGMP snooping per port and IGMP Query mode
< 147 >
MILAN
managed switches
8-port 10/100 Power Over Ethernet (POE) Layer 2+ Remotely Managed Switch
MIL-SM802GAF
(8) 10/100 ports + (1) SFP/RJ-45 Combo port
8-port Managed Switch with 4-
Remote Management
port integrated POE injector
Optional Reverse Polarity Cable
4 ports with full POE
Supports SNMP v1, v2c and v3
functionality
Table of Contents
Select Media Converter
Select Switch
NEW
Power over unused pins for
Legacy support
Features
IGMP v1 & v2
8-port 10/100 Base-TX plus
100/1000Base-X or 10/100/1000Base-T
Connect and power Wireless Access Points, Network
Cameras and VOIP
MIL-SM802GAF
8-port 10/100 POE Remotely Managed
switch with (4) POE Injector ports
and (1) SFP/copper port
4 ports with full PSE POE delivery
Reverse polarity POE cable
MIL-LRPC
POE Reverse Polarity Cable
IEEE Std. 802.3af Compliant
Full 15.4 Watts per port
POE Legacy and Reverse Polarity
Support
Ordering Info
Optional Accessories
(sold separately)
SFP Modules (see pages 135-136)
MIL-SM802GAF
Remote Device power shutdown
IEEE802.1p Class of service
Ipv4 IP TOS and DiffServ QOS classification,
IPv6 Traffic class with 4 queues per port
Specifications
Standards
IEEE 802.1q™ VLAN, up to 256 groups,
VLAN tagging ID up to 4096
Static MAC, 50 entries
IEEE 802.1x
RADIUS client
DHCP Client and Server, SNTP
Auto MDI-MDIX
IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex;
IEEE Std. 802.3u 100BASE-TX, 10/100Mbps,
Half/Full Duplex;
IEEE Std. 802.3x Flow control and Back-pressure;
IEEE Std. 802.3ad Link Aggregation;
IEEE Std. 802.1Q VLAN Tagging;
IEEE Std. 802.1p Class of service;
IEEE Std. 802.1d Spanning Tree Protocol;
IEEE Std. 802.1X Authentication Protocol
IEEE Std. 802.3ab 1000BASE-T
IEEE Std. 802.3z Gigabit Fiber
IEEE Std. 802.3af Power Over Ethernet
IEEE 802.1w Rapid Spanning Tree Protocol
IGMP/GVRP
Protocols
CSMA/CD
Port Mirroring
Technology
Store and Forward switching architecture
8K MAC Address
Transfer Rate
14,880 pps for 10Mbps
148,800 pps for 100Mbps
1,488,000 pps for Gigabit Fiber Ethernet Port
Connectors
10/100 Copper: 8x RJ-45 incl. 4x(POE) Ports
Fiber: 1x dual speed SFP port
100BASEFX/1000BASE-X
MAC Address
8K MAC address table
Telnet/CLI/Web-based management
TFTP Firmware Upgrade
The MIL-SM802GAF connects remote POE segment to the
network over fiber. The switch delivers a full 15.4Watts of
DC power on each of four POE switch ports. POE ports
provide data connection and the power source (PSE) for
such POE PD devices as Wireless Access Points, VoIP
phones and Network Cameras. The series includes a PD
signature sensing and power monitoring features per the
IEEE 802.3af standard. Other POE features include OverCurrent Protection and Under-Current Detection. The series
is fully compatible with devices that comply with the
IEEE802.3af standard and it is capable of inserting power
on the unused pairs of the MDI.
Management features include port based, dynamic and
static VLANs, GVRP, VLAN tagging, IGMP Snooping or
querying, port mirroring, port security. Security includes
static addressing, filtering and blocking of packets to
identified MAC addresses. Four priority queues insure
minimum delay for voice over IP or multimedia network
data.
Non-blocking 5.6Gbps architecture assures rapid packet
delivery while 8,000 MAC address table provides swift
lookup and packet forwarding.
< 148 >
Visit our website at www.transition.com
Memory Buffer
384Kbytes (3Mbits)
Jumbo packet support
Max 9Kbytes jumbo packet size
Network Cable
10BASE-T: 2-pair UTP/STP Cat. 3, 4, 5 cable; EIA/TIA568 100-ohm (100 m)
100BASE-TX: 2-pair UTP/STP Cat. 5 cable; EIA/TIA568 100-ohm (100 m)
Backplane
5.6Gbps
LEDs
RJ-45 port: 10/100; Link/Activity; Full duplex/Collision
Fiber: Link/Activity
Power: On/Off
Power Supply
Built-in AC power supply: AC 100~240V, 50/60Hz,
110W;
Power Consumption
(DC) 20 watts (Non-POE functions)
Operating Temperature
0° to 45°C (32° to 113°)
Operating Humidity
10% to 90% (non-condensing)
Dimensions
Width: 8.5" [217 mm]
Depth: 5.5" [140 mm]
Height: 1.7" [44 mm]
EMI
FCC Class A, CE Mark
Safety Compliance
UL, cUL
For larger port-count POE
applications, please refer to:
MIL-SM8TXAF2GPA
MIL-SM2401MAF
For smaller port-count POE
applications, please refer to
our POE media conversion
products:
SPOEB10xx-100
J/POE-CF-01(xx)
MILAN
managed switches
8-port 10/100 Power Over Ethernet Layer 2 Remotely Managed Switch
Managed Switch
AC and DC power inputs
8 ports with full POE
Supports SNMP v1, v2c and v3
Power over unused pins for
functionality; power limit per
classification
legacy support
Dual Speed 100/1000 SFP slot
Optional Reverse Polarity Cable
Features
IGMP v1 & v2
8-port 10/100 Base-TX plus
100Base-FX/1000 Base-X SFP
10/100 with fiber
10/100/1000 with fiber
NEW
Table of Contents
Select Media Converter
Select Switch
Connect and power Wireless Access Points, Network
Cameras and VOIP
Ordering Info
MIL-SM8TXAF2GPA
8-port 10/100 POE Remotely Managed
switch with (2) SFP Combo Gigabit
ports
8 ports with integrated
POE injectors
Never Down Ring Technology
MIL-LRPC
POE Reverse Polarity Cable
IEEE Std. 802.3af Compliance
Optional Accessories
Full 15.4 Watts per port
POE Legacy and Reverse Polarity
Support
10/100 copper
MIL-SM8TXAF2GPA
(8) 10/100 ports + (2) SFP/RJ-45 Combo ports
(sold separately)
SFP Modules (see pages 135-136)
MIL-SM8TXAF2GPA
Non-blocking switching architecture
IEEE802.1p Class of service
Ipv4 IP TOS and DiffServ QOS classification, IPv6 Traffic
class with 4 queues per port
Specifications
Standards
IEEE 802.1q VLAN, up tp 256 groups,
VLAN tagging ID up to 4096.
Static MAC, 100 entries
IEEE 802.1x
RADIUS client
DHCP Client and Server, SNTP
Auto MDI-MDIX
IGMP/GVRP
Port Mirroring
Protocols
CSMA/CD
Technology
Store and Forward switching architecture
Transfer Rate
14,880 pps for 10Mbps
148,800 pps for 100Mbps
1,488,000 pps for Gigabit Fiber Ethernet Port
Connectors
10/100 copper: 8x RJ-45 with Auto-MDIX
Fiber:Two dual speed SFP ports
100BASE-FX/1000 BASE-X
8K MAC Address
Telnet/ Web-Based management
TFTP Firmware Upgrade and configuration backup
The MIL-SM8TXAF2GPA connects remote POE segment to
the network over fiber. The switch delivers a full 15.4Watts
of DC power on each of eight POE switch ports. POE ports
provide data connection and the power source (PSE) for
such POE PD devices as Wireless Access Points, VoIP
phones and Network Cameras. The series includes a PD
signature sensing and power monitoring features per the
IEEE 802.3af standard. Other POE features include OverCurrent Protection and Under-Current Detection. The series
is fully compatible with devices that comply with the
IEEE802.3af standard and it is capable of inserting power on
the unused pairs of the MDI.
Management features include port based, dynamic and static
VLANs, GVRP, VLAN tagging, IGMP Snooping or querying,
port mirroring, port security. Security includes static
addressing, filtering and blocking of packets to identified
MAC addresses. Four priority queues insure minimum delay
for voice over IP or multimedia network data.
Non-blocking 5.6Gbps architecture assures rapid packet
delivery while 8,000 MAC address table provides swift
lookup and packet forwarding.
Call us at 800-526-9267 or 952-941-7600
IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex;
IEEE Std. 802.3u 100BASE-TX, 10/100Mbps,
Half/Full Duplex;
IEEE Std. 802.3x Flow control and Back-pressure;
IEEE Std. 802.3ad Link Aggregation;
IEEE Std. 802.1Q VLAN Tagging;
IEEE Std. 802.3ab 1000BASE-T
IEEE 802.3z Gigabit Fiber
IEEE 802.3af Power over Ethernet
IEEE Std. 802.1p Class of service;
IEEE Std. 802.1d Spanning Tree Protocol;
IEEE Std. 802.1w Rapid Spanning Tree Protocol;
IEEE Std. 802.1X Authentication Protocol
MAC Address
8K MAC address table
Jumbo packet support
Max 9Kbytes jumbo packet size
Network Cable
10BASE-T: 2-pair UTP/STP Cat. 3, 4, 5 cable; EIA/TIA568 100-ohm (100 m)
100BASE-TX: 2-pair UTP/STP Cat. 5 cable; EIA/TIA-568
100-ohm (100 m)
Backplane
5.6Gbps
LEDs
RJ-45 port: 10/100; Link/Activity; Full duplex/Collision
Fiber: Link/Activity
Power: On/Off
POE: PWR FWD
Power Supply
Built-in AC power supply: AC 100~240V, 50/60Hz,
200W;
Optional External AC/DC Power Supply 48VDC Input
Power Consumption
(DC) 20 watts (Non-POE functions)
Operating Temperature
0° to 45°C (32° to 113°)
Operating Humidity
10% to 90% (non-condensing)
Dimensions
Width: 11" [280 mm]
Depth: 8.3" [211 mm]
Height: 1.7" [44 mm]
EMI
FCC Class A, CE Mark
Safety Compliance
UL, cUL
For larger port-count POE
applications, please refer to our
24-port remotely-managed
POE switch:
MIL-SM2401MAF
For smaller port-count POE
applications, please refer to our
POE media conversion
products:
SPOEB10xx-100
J/POE-CF-01(xx)
< 149 >
MILAN
managed switches
24-port 10/100 Power Over Ethernet Layer 2 Remotely Managed Switch
(24) 10/100 ports + (2) SFP/RJ-45 Combo ports
Managed POE Switch
24 ports with full POE
functionality; power limit per
classification
MIL-SM2401MAF
Table of Contents
Select Media Converter
Select Switch
DC and AC power inputs on
switch
IGMP v1, v2
Auto-MDIX on all ports
High Back-plane bandwidth
8.8Gbps
Features
15.4 Watts of DC power per port
Connect and power Wireless Access Points, Network
Cameras and VOIP
Ordering Info
24 ports with full PoE functionality
MIL-SM2401MAF
24-port 10/100 POE Remotely
Managed switch with (2) SFP/RJ-45
Combo ports
Enable/Disable POE function
Power limit by classification
Power limit by management power
feeding priority
Legacy Power Signature Detection
Optional Accessories
(sold separately)
SFP Modules (see pages 135-136)
for unique electrical signatures
Auto-Negotiation
12K Jumbo Frame support
True non-blocking switching
8K MAC address table
Specifications
Back pressure and flow control
Standards
Store and forward switching architecture
384Kbytes memory buffer
Management: Console port, Web-based GUI, telnet and SNMP
Firmware update: TFTP firmware upgrade
Port Trunk: Supports IEEE802.3ad with LACP function. Up to 7 trunk groups and
group member up to 4.
VLAN: Supports port based VLAN, up to 256 static VLAN groups and up to 2048
dynamic VLAN groups. VLAN tagging up to 4094. Compatible with IEEE802.1Q
and IEEE802.1v
IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex;
IEEE Std. 802.3u 100BASE-TX, 10/100Mbps,
Half/Full Duplex;
IEEE Std. 802.3af Power over Ethernet
IEEE Std. 802.1w Rapid Spanning Tree Protocol
IEEE Std. 802.3z Gigabit SX/LX
IEEE Std. 802.3ab Gigabit 1000T
IEEE Std. 802.3x Flow control and Back-pressure;
IEEE Std. 802.3ad Link Aggregation;
IEEE Std. 802.1Q VLAN Tagging;
IEEE Std. 802.1p Class of service;
IEEE Std. 802.1d Spanning Tree Protocol;
IEEE Std. 802.1X Authentication Protocol
Protocols
CSMA/CD
Technology
Store and Forward switching architecture
Transfer Rate
14,880 pps for 10Mbps
148,800 pps for 100Mbps
Spanning Tree: Supports IEEE802.1w rapid spanning tree and IEEE802.1d
spanning tree.
Connectors
10/100 copper: 24x RJ-45 with Auto-MDIX, Two SFP
Gigabit ports/RJ-45 10/100/1000BASE-T
Port Mirror: Supports RX, TX and Both packet mirror
MAC Address
8K MAC address table
Quality of Service: Support port based, Tag based and IPv4 ToS
Class of Service: Supports 802.1p class of service with 2-level priority queuing.
IGMP: Supports IGMP V1, V2
Broadcast Storm: Only allows a percentage of port’s total bandwidth before
broadcast traffic is dropped. Enable/Disable, 5%, 10%, 20%, 25%
The MIL-SM2401MAF Power over Ethernet series of layer 2 managed switches
provides high performance non-blocking switching. The switch has (24) autosensing 10/100 auto MDI/MDIX ports with full PoE functionality. The switch also
has (2) SFP Gigabit ports.
Management features include port based, dynamic and static VLANs, GVRP, IGMP,
port mirroring, and port security. Security includes static addressing, filtering and
blocking of packets to identified MAC address. Two priority queues per port insure
minimum delay for voice over IP or multimedia network data. Console port
provides local management while Telnet and Web-based management is provide via
any network device.
Memory Buffer
384Kbytes (3Mbits)
Jumbo packet support
Max 12Kbytes jumbo packet size
Network Cable
10BASE-T: 2-pair UTP/STP Cat. 3, 4, 5 cable; EIA/TIA568 100-ohm (100 m)
100BASE-TX: 2-pair UTP/STP Cat. 5 cable; EIA/TIA-568
100-ohm (100 m)
Backplane
8.8Gbps
LEDs
RJ-45 port: 10/100; Link/Activity; Full duplex/Collision
Fiber: Link/Activity
Power: On/Off
Power Supply
Built-in AC power supply: AC 90~240V, 50/60Hz, 200W;
Extra power input: DC 48V
Power Consumption
20W Maximum with additional DC power input
Operating Temperature
0° to 40°C (32° to 96°)
Operating Humidity
10% to 90% (non-condensing)
Non-blocking 8.8Gbps architecture assures rapid packet delivery while 8,000 MAC
address table provides swift lookup and packet forwarding.
Dimensions
Other ASIC features that enhance performance are included such as 802.1d
spanning tree, 802.3x flow control, 802.3ad link aggregation and broadcast storm
control.
Width: 17.0" [440 mm]
Depth: 11.0" [280 mm]
Height: 1.7" [44 mm]
EMI
FCC Class A, CE Mark
Safety Compliance
UL, cUL
< 150 >
Visit our website at www.transition.com
MILAN
managed switches
48-port 10/100 Multi-Layer Stackable Managed Switch
(48) 10/100 ports + (2) SFP/RJ-45 Combo ports & (2) stacking ports
Auto-sensing 10/100 ports
Multi-Layer Protocol Support
(2) hot-swappable Gigabit
Small Form Factor Pluggable
interfaces
Simplified Network
Management
(2) 10/100/1000 Stacking Ports
1U Rack-Mount Form Factor
10/100 copper
MIL-SM4804G
10/100 with fiber
10/100/1000 with fiber
Outstanding Value
Table of Contents
Select Media Converter
Select Switch
Robust Security
Most Powerful, Flexible Multi-Layer Switch
in its Class
The MILAN Multi-Layer 10/100 switch delivers maximum
throughput and flexibility where you need it:
• High-density workgroups at the edge of the network
• The backbone of small networks
The non-blocking design of the switch delivers
simultaneous, full wire-speed, low-latency throughput to all
ports. In addition, the 1U rack-mount form factor uses less
rack space and provides a lower per-port cost over
comparable switches.
Multi-Layer Management Features
Graphical User Interface HTML browser-based with
password protection for local and remote management
Command Line Interface Industry-standard CLI
Front panel Graphical representation of unit with realtime network and port status
Port Status Displays current per-port configuration
showing speed, flow-control, bandwidth status and port
security status.
• 48-Port Fast Ethernet with Auto-MDI/MDIX (100BaseTX, 10BaseT): RJ-45
• 2 Combo (RJ-45/SFP) Ports
• 2 Gigabit Ethernet Ports with Auto-MDI/MDI-X (1000BASET, 100BASETX,
10BASET): RJ-45 for Stacking
• Console: Serial (RS-232): DB9
LED Indicators
Port, Uplink, System, Diagnostic, Stack/Master
Performance
17.6 Gbps Switching Fabric
8k MAC Addresses
Dimensions
Width: 17.4" [440 mm]
Depth: 12.8" [324 mm]
Height: 1.7" [43 mm]
Mounting
Install into a standard 19-inch rack (1 RU height) or placed on a
desktop; rackmount kit included
Operating Temperature
32° to 104° F (0° to 40° C)
Relative Humidity
10% to 90% non-condensing
Power Requirements
Auto-switching, 110/240 VAC, 47 – 63Hz; 35W
Standards Compliance
IEEE 802.1DF Spanning tree and bridge filters
IEEE 802.1W Rapid spanning tree and bridge filters
IEEE 802.1p Quality of Service (QoS)
IEEE 802.1X EAP Authentication
IEEE 802.1p Prioritization (Class of Service)
IEEE 802.1Q Virtual LAN (VLAN) Tagging
IEEE 802.3ad Link aggregation (LACP)
IEEE 802.3ac Frame extension for VLAN tagging
IEEE 802.3x Flow control and back pressure
IEEE 802.3z 1000BaseSX/LX over single mode/ multimode fiber; max distance
49200 ft. (15 km)
IEEE 802.3ab 1000BaseT over Cat. 5 UTP (4 pairs); max distance 328 ft. (100
meters)
IEEE 802.3u 100BaseTX over Cat. 5 UTP (2 pairs); max distance 328 ft. (100
meters)
IEEE 802.3 10BaseT over Cat. 3 UTP (2 pairs); max distance 328 ft. (100 meters)
RFC 2674 Extended Bridge MIB
RFC 2665 Ether-Like MIB
RFC 2863 Interface MIB
RFC 1493 Bridge MIB
RFC 1213 MIB II
Emissions & Safety
FCC Class A, CE Mark, UL listed
Technical Support & Warranty
Free technical support and advanced warranty support for 5 years. Includes free
telephone support, 24-hour support via web and ftp.
Call us at 800-526-9267 or 952-941-7600
MIL-SM4804G
48-port 10/100 Multi-Layer Stackable
Managed Switch with (2) SFP Gigabit
ports and (2) Gigabit stacking ports
Optional Accessories
(sold separately)
SFP Modules (see pages 135-136)
Port Statistics Displays link, type and state of each port
including RX/TX/Error for each port and unit. Table view
also shows current, peak average & total packets for each
port.
Specifications
Connectors
Ordering Info
Port Controls Configure the state (enabled, disabled),
link status (up, down) and mode (speed, duplex); AutoNegotiation, flow control, priority and bandwidth limits.
Link Aggregation Set up IEEE 802.3ad Port Trunking
with flexible load distribution, up to 8 ports per trunk group.
VLAN Configuration Supports port or protocol based
VLANs up to 255 active VLANs (0~4094). GVRP for
automatic VLAN registration and dynamic VLAN
management.
Spanning Tree Supports IEEE802.1D STP and
IEEE802.1w RSTP
IGMP Supports IGMP v1/v2 Snooping and Query
functions
Port Mirroring Monitor network traffic by Enable/disable
Port Mirroring and select the ports for packet analysis
Remote Management Supports SNMP v1/v2c, RMON,
and Telnet
Security Port and MAC-based IEEE802.1X
Authentication, TACACS+, SSL, SSH v1.5/v2, and Access
Control List (ACL)
Jumbo Frame Supports up to 9100Kb Jumbo Frames
Quality of Service (QoS)
• L2/L3/L4 Traffic Classification/Priority Management,
based on IEEE802.1p 4 priority queues control, based on
IP Precedence/TOS & DSCP/TOS, and based on
TCP/UDP port numbers
• Supports WRR & SPF for priority queues, DiffServ/IPToS
Prioritization, and Random Early Detection (RED)
Bandwidth Control Supports Ingress/Egress based
Bandwidth Limiting
IP Stacking Single IP Address, closed loop Stacking, up
to 8 units:
• Manage Trunking, VLAN memberships, Packet priority
and Port Mirroring across stack
< 151 >
MILAN
managed switches
9-port 10/100/1000 Layer 2 Indoor/Protected Outdoor Remote IP-Managed Switch
MIL-SM8002TG
(9) 10/100/1000 ports + (2) SFP/RJ-45 Combo ports
9-port 10/100/1000BASE-T
Auto MDI/MDI-X
Non-blocking switching
architecture
(2) 1000BASE-X SFP combo
ports
IEEE 802.1q VLAN tagging & Q
in Q for SNMP GVRP/MVR
Indoor/Outdoor installation up
IEEE 802.1p Class of Service 4
priority queues
to 60°C (140°F)
Additional Features
IGMP query and snooping
Connect Indoor or Protected Outdoor Ethernet Devices
over High Speed Dual Gigabit Links
802.1X Authentication
Port Mirroring
8K MAC Address
Optional Accessories
Telnet/Web-based management
(sold separately)
SFP Modules (see pages 135-136)
TFTP firmware and configuration
upgrade
Enable/disable ports
Auto-Negotiation
Forced modes,
10H/10H/100H/100F/1000F
Auto-MDIX on all ports
802.3X Flow control and Back-pressure
Specifications
16Mb System Memory
Standards
8Mb Flash ROM
1Mbps Buffer
Broadcast storm filter
DHCP Client, Relay, Server
SNTP and SMTP support
MAC Address Security
Bandwidth Allocation
IEEE Std. 802.3 10BASE-T;
IEEE Std. 802.3u 100BASE-TX;
IEEE Std. 802.3z Gigabit fiber;
IEEE Std. 802.3ab 1000BASE-T;
IEEE Std. 802.3x Flow control and
Back-pressure;
IEEE Std. 802.3ad Port trunk with LACP;
IEEE Std. 802.1d Spanning Tree Protocol;
IEEE Std. 802.1w Rapid spanning tree;
IEEE Std. 802.1p Class of service
IEEE Std. 802.1q VLAN Tagging
IEEE Std. 802.1x user authentication
QoS port-based/Tag based, IPv4, Tos/Ipv4, IPv6,
DiffServ
Ingress & Egress MAC address filter & static source
MAC address lock
Protocols
CSMA/CD
Technology
Store and Forward switching architecture
Connectors
10/100/1000 copper: 9x RJ-45 with
AutoCross (Auto MDI/MDI-X), Two SFP
ports
Software Features
MAC Address
8K MAC address table
Memory Buffer
128Kbytes
Management: Remote IP-Based Management, Web
Management, SNMP V1/2, Telnet, Menu based CLI
Firmware update: TFTP firmware upgrade and
configuration backup
System default: Restore function for system default
Port Trunk: Supports IEEE802.3ad port trunk with link
aggregation control protocol (LACP). Up to 3 trunk groups
and maximum group member up to 8 ports.
VLAN: Port Based VLAN; IEEE802.1Q, 4096 VLAN IDs,
256/2048 static/dynamic VLAN groups, 256 GVRP Groups
Quality of Service: Support port based, Tag based and
IPv4 ToS, IPv4/IPv6 Diff Serve
Class of Service: Per port supports 2 priority queues
Spanning Tree: Supports IEEE802.1w rapid spanning
tree and IEEE 802.1d
Port Mirror: Supports TX or bi-directional RX packet
mirroring
IGMP: Supports IGMP V1, V2
Broadcast Storm: Enable/Disable, 5%, 10%, 20%, 25%
Visit our website at www.transition.com
Ordering Info
MIL-SM8002TG
9-port 10/100/1000 Indoor/Outdoor
Remotely Managed switch with (2)
SFP combo Gigabit ports
RADIUS/TACACS+
< 152 >
Table of Contents
Select Media Converter
Select Switch
Jumbo packet support
Network Cable
Max 9Kbytes jumbo packet size
10BASE-T: 2-pair UTP/STP Cat. 3, 4, 5
cable; EIA/TIA-568 100-ohm (100 m)
100BASE-TX: 2-pair UTP/STP Cat. 5 cable;
EIA/TIA-568 100-ohm (100 m);
1000BASE-T: 4-pair UTP/STP Cat. 5e
cable; EIA/TIA-568 100-ohm (100 m)
Backplane
18Gbps
LEDs
RJ-45 port: 10/100/1000; Link/Activity;
Full duplex/Collision
Fiber: Link/Activity
Power: On/Off
Power Supply
Internal power: 100 – 240VAC
Power Consumption
10 watts max.
Operation Temperature
0° to 60°C (32° to 140°F)
Operation Humidity
10% to 90% (non-condensing)
Dimensions
Width: 217 mm
Depth: 140 mm
Height: 43 mm
EMI
FCC Class A, CE Mark
Safety Compliance
UL, cUL
Technical Support & Warranty
Free technical support and advanced
warranty support for 5 years. Includes free
telephone support, 24-hour support via
web and ftp.
24-port 10/100/1000 Multi-Layer Managed Switch
MILAN
managed switches
(24) 10/100/1000 ports + (4) SFP/RJ-45 Combo ports
Auto-sensing 10/100/1000 ports
Robust Security
(4) hot-swappable Small Form
Factor Pluggable interfaces
Multi-Layer Protocol Support
L2/L3/L4 Traffic classification
Prioritization
Table of Contents
Select Media Converter
Select Switch
10/100 copper
10/100 with fiber
MIL-SM24004TG
10/100/1000 with fiber
Simplified Network
Management
Outstanding Value
IGMP v1, v2
Most Powerful, Gigabit Multi-Layer Switch in
its Class
Multi-Layer Management Features
The MILAN Multi-Layer Gigabit Ethernet switch delivers
maximum throughput and flexibility where you need it:
Command Line Interface: Industry-standard CLI
• High-density workgroups at the edge of the network
• The backbone of small networks
It also supports L2/L4 Gigabit Switching performance and
eliminates network bottlenecks with wire-speed switching
fabric.
Specifications
Connectors
• 24-Port 10/100/1000 Ethernet with
Auto-MDI/MDIX (1000BaseT,
100BaseTX, 10BaseT): RJ-45
• 4 Combo (RJ-45/SFP) Ports
• Console: Serial (RS-232): DB9
LED Indicators
Port, Uplink, System, Diagnostic
Performance
48 Gbps Switching Fabric
16k MAC Addresses
Buffer
1MB
Dimensions
Width: 17.4" [440 mm]
Depth: 12.8" [324 mm]
Height: 1.7" [43 mm]
Operating Temperature
32° to 104° F (0° to 40° C)
Relative Humidity
10% to 90% non-condensing
Power Requirements
Auto-switching, 110/240 VAC,
47~63Hz; 35W
Standards Compliance
IEEE 802.1D Spanning tree and bridge filters
IEEE 802.1W Rapid spanning tree and bridge filters
IEEE802.1S Multiple Spanning Tree
IEEE 802.1p Quality of Service (QoS)
IEEE 802.1X EAP Authentication
IEEE 802.1p Prioritization (Class of Service)
IEEE 802.1Q Virtual LAN (VLAN) Tagging
IEEE 802.3ad Link aggregation (LACP)
IEEE 802.3ac Frame extension for VLAN tagging
IEEE 802.3x Flow control and back pressure
IEEE 802.3z 1000BaseSX/LX over SM/MM fiber [15 km]
IEEE 802.3ab 1000BaseT over Cat. 5 UTP (4 pairs) [100 m]
IEEE 802.3u 100BaseTX over Cat. 5 UTP (2 pairs) [100 m]
IEEE 802.3 10BaseT over Cat. 3 UTP (2 pairs) [100 m]
RFC 2674 Extended Bridge MIB
RFC 2665 Ether-Like MIB
RFC 2863 Interface MIB
RFC 1493 Bridge MIB
RFC 1213 MIB II
RFC 792 ICMP
RFC 1112 IGMP
RFC 2236 IGMPv2
RFC 2618 RADIUS+
RFC 1757 (group 1,2,3,9) RMON
RFC 1157 SNMP
RFC 1907 SNMPv2
RFC 2030 SNTP
Emissions & Safety
FCC Class A, CE Mark, UL listed
Technical Support & Warranty
Free technical support and advanced warranty support
for 5 years. Includes free telephone support, 24-hour
support via web and ftp.
Call us at 800-526-9267 or 952-941-7600
Graphical User Interface: HTML browser-based with
password protection for local and remote management
Front panel: Graphical representation of unit with realtime network and port status
Port Status: Displays current per-port configuration
showing speed, flow-control, bandwidth status and port
security status.
Port Statistics: Displays link, type and state of each port
including RX/TX/Error for each port and unit. Table view
also shows current, peak average & total packets for each
port.
Ordering Info
MIL-SM24004TG
24-port 10/100/1000BASE-T Ethernet
Multi-Layer Managed switch with (4)
SFP Combo Gigabit Ports
Optional Accessories
(sold separately)
SFP Modules (see pages 135-136)
Port Controls: Configure the state (enabled, disabled),
link status (up, down) and mode (speed, duplex); AutoNegotiation, flow control, priority, bandwidth limits, MAC
address learning mode & MAC filtering.
Link Aggregation: Set up IEEE 802.3ad Port Trunking
with flexible load distribution, up to 8 ports per trunk group.
VLAN Configuration: Supports 802.1q tagged port or
protocol based VLANs up to 255 active VLANs (0~4094).
GVRP for automatic VLAN registration and dynamic VLAN
management.
Spanning Tree: Supports IEEE802.1D STP, IEEE802.1w
RSTP and IEEE 802.1S Multiple Spanning Tree
IGMP: Supports IGMP v1/v2 Snooping and Query
functions
Port Mirroring: Monitor network traffic by Enable/disable
Port Mirroring and select the ports for packet analysis
Remote Management: Supports SNMP v1/v2c, RMON,
and Telnet
Security: Port and MAC-based IEEE802.1X
Authentication, TACACS+, SSL, SSH v1.5/v2, and Standard,
Extended IP & MAC Access Control List (ACL)
Jumbo Frame: Supports up to 9KB Jumbo Frames
Quality of Service (QoS):
• L2/L3/L4 Traffic Classification/Priority Management,
based on IEEE802.1p 4 priority queues control, based on
IP Precedence/TOS & DSCP/TOS, and based on
TCP/UDP port numbers
• Supports WRR & SPF for priority queues, DiffServ/IPToS
Prioritization, and Random Early Detection (RED)
Bandwidth Control: Supports Ingress/Egress based
Bandwidth Limiting
Remote Firmware Upgrade: and Remote Configuration
Storage support
Editable configuration file
System Log
SNTP Clock Synchronization
DNS Server
< 153 >
5 or 8-port 10/100BASE-TX Compact Switches
MILAN
unmanaged switches
Table of Contents
Select Media Converter
Select Switch
MIL-S500 &
MIL-S800
(5) or (8) 10/100BASE-TX ports
Full Duplex Flow Control
Store-and-Forward
Auto-Negotiating
With award-winning performance in an incredibly compact
design, MILAN by Transition's MIL-S500 and MIL-S800
Switches auto-negotiate 10/100Mbps connections for fast
and simple switching in workgroup, small office, and home
environments. Features include:
Full/Half Duplex
Each port capable of operating at full or half duplex,
allowing up to 200 Mbps for end users. Flow control and
back pressure minimize packet loss and maximize
performance.
Features
Filtering/Forwarding/Learning:Non-blocking, full wire
speed
Ports: Auto-negotiating for speed and duplex
Forwarding mode: Store-and-forward
Auto-MDI/MDIX: Crossover cables not needed
LEDs: Power, 100 Mbps, Link/Activity, FDX/COL
MIL-BRSW
Mounting bracket for MIL-S800
Ruggedized Chassis
Sturdy metal enclosures with optional mounting brackets
and magnets for installation in nontraditional environments.
Straightforward Diagnostics
Perpetual port status provided via front-side LEDs to
simplify troubleshooting.
Secure and Safe
UL, cUL, and TUV Certifications; conforms to IEEE 802.3,
802.3u, and 802.3x standards.
Specifications
IEEE Std. 802.3 10BASE-T
Ethernet; IEEE Std. 802.3
100BASE-TX Ethernet; IEEE Std.
802.3x full-duplex flow control
Operating Temperature
MIL-S500: 1K
MIL-S800: 2K
Relative Humidity
10% to 90%
Weight
MIL-S500: 0.26 kg (9 oz)
MIL-S800: 0.45 kg (1 lb.)
External Power Supply
DC Output Power: 9V DC, 700mA
Power Consumption
MIL-S500: 1.5 Watts maximum
MIL-S800: 4.2 Watts maximum
Compliance
Safety: UL, cUL, TUV
Emissions: FCC Class B, CISPR 22 Class B,
CE Mark
Packet Buffer
MIL-S500: 128 KB
MIL-S800: 128KB
Network Interface
10BASE-T: RJ-45 Categories 3, 4,
5 100-ohm UTP
100BASE-TX: RJ-45 Category 5
100-ohm UTP
Dimensions
MIL-S500:
Width: 4.3" [110 mm]
Depth: 2.8" [70 mm]
Height: 0.7" [19 mm]
MIL-S800:
Width: 6.5" [165 mm]
Depth: 4.0" [100 mm]
Height: 1.0" [24 mm]
< 154 >
Visit our website at www.transition.com
MIL-S800
8-Port 10/100BASE-TX Switch
(sold separately)
Mounting Brackets:
MIL-BR500
Mounting bracket for MIL-S500
Automatic MDI/MDIX
Provides automatic cable detection on 10/100BASE-TX
ports for adjusting to straight-through or crossover cables
during installation.
MAC Address Table
MIL-S500
5-Port 10/100BASE-TX Micro Switch
Optional Accessories
High-performance Switching
Non-blocking architecture assures rapid packet delivery,
while extensive MAC address tables and memory buffering
provide swift lookup and packet forwarding.
Standards Compliance
Ordering Info
0° to 45°C (32°F to 113°F )
Storage Temperature
-25°C to 70°C ( -13°F to 158°F )
Operating Humidity
10% to 90% ( non-condensing )
Technical Support & Warranty
Free technical support and advanced warranty
support for 5 years. Includes free telephone
support, 24-hour support via web and ftp.
8-port 10/100BASE-TX Compact Switches with internal power
MILAN
unmanaged switches
(8) 10/100BASE-TX ports
MIL-S800i
10/100 copper
10/100 with fiber
10/100/1000
10/100/1000 with fiber
10/100 Unmanaged Switch
Compact Size
Internal power supply
Table of Contents
Select Media Converter
Select Switch
Store-and-Forward
Auto-MDI/MDIX
The industry’s smallest 8-port compact switch with an
internal power supply—MILAN by Transition’s MIL-S800i—
auto-negotiates 10/100Mbps connections for fast and
simple switching in workgroup, small office, and home
environments. Features include:
Full/Half Duplex
Each port is capable of operating at full or half duplex,
allowing up to 200 Mbps for end users. Flow control and
back pressure minimize packet loss and maximize
performance.
Ruggedized Chassis
Sturdy metal enclosures with wall holes mounts for
installation in non-traditional environments
Straightforward Diagnostics
Perpetual port status provided via LEDs on top of switch to
simplify troubleshooting.
Ordering Info
MIL-S800i
8-port 10/100BASE-TX Micro Switch
with internal power supply
Secure and Safe
Class B, UL, cUL, and TUV Certifications; conforms to IEEE
802.3, 802.3u, and 802.3x standards.
High-performance Switching
Non-blocking architecture assures rapid packet delivery,
while 4K MAC address table and memory buffering provide
swift lookup and packet forwarding.
MDI/MDIX
Provides automatic cable detection on 10/100BASE-TX
ports for adjusting to straight-through or crossover cables
during installation.
Specifications
Standards
IEEE Std. 802.3 10BASE-T Ethernet;
IEEE Std. 802.3 100BASE-TX Ethernet;
IEEE Std. 802.3x full-duplex flow control
Network Interface
10BASE-T: RJ-45 Categories 3, 4, 5
100-ohm UTP;
100BASE-TX: RJ-45 Category 5
100-ohm UTP
Buffer Memory
256KB
Dimensions
Width: 6.3" [160 mm]
Depth: 4.0" [100 mm]
Height: 1.0" [28 mm]
Operating Temperature
0 to 45°C (32°F to 113°F )
Operating Humidity 10% to 90% ( non-condensing )
Storage Temperature -25°C to 75°C (-13°F to 167°F )
Relative Humidity
10% to 95%
Weight
0.45 kg (1 lb.)
Internal Power Supply
AC Power: 100 – 240 VAC
Line Frequency: 50/60Hz
Power Consumption
7 Watts maximum
Compliance
Safety: UL, cUL, TUV/GS, CE
Emissions: FCC Class B, CISPR 22
Class B, CE Mark, VCCI Class B
Technical Support & Warranty
Free technical support and advanced warranty
support for 5 years. Includes free telephone
support, 24-hour support via web and ftp.
Call us at 800-526-9267 or 952-941-7600
< 155 >
5 or 8-port 10/100BASE-TX Switches with built-in fiber
MILAN
unmanaged switches
MIL-S501xx &
MIL-S801xx
(5) or (8) 10/100BASE-TX ports + (1) fiber port
Auto-Negotiation
Table of Contents
Select Media Converter
Select Switch
Full/Half duplex Flow Control
Full/Half duplex Fiber Mode Control
Compact Size
Sturdy Metal Enclosure
MiLAN's 10/100Mbps Switches with Fiber provide multiple
10/100BASE-TX ports with one 100BASE-FX fiber port.
Both the MIL-S501 and MIL-S801 Series are ideal for
alleviating traffic bottlenecks in workgroup environments;
by combining copper and fiber ports in the same chassis,
they offer an inexpensive solution for segmenting LANs
and easily interconnecting networks in campus or multitenant environments.
High-Powered Switching
Each switch operates at wire speed with automatic MAC
address learning and aging, requiring no user
configuration; MIL-S801 has non-blocking 1.8Gbps
architecture assuring rapid packet delivery.
Fiber Connectivity
Four different connection types: SC or ST for Multimode
and SC or ST for Single Mode—ideal for linking longdistance network segments up to 37 miles (60 km).
Auto MDI/MDIX
Automatic cable detection for adjusting 10/100BASE-TX
ports to straight-through or crossover cables during install
Compact and Flexible
Sturdy metal enclosure with wall mounts, optional
mounting brackets and all media connections on front
panel.
Half/Full Duplex
All ports running at 100Mbps operate in either half or full
duplex mode, providing up to 200Mbps of bandwidth for
end users.
MIL-S501ST
5-Port 10/100BASE-TX + (1)
100BASE-FX multimode (ST)
[2 km/1.2 miles]
MIL-S501SC
5-Port 10/100BASE-TX + (1)
100BASE-FX multimode (SC)
[2 km/1.2 miles]
MIL-S501SC-15
5-Port 10/100BASE-TX + (1)
100BASE-FX single mode (SC)
[15 km/9.3 miles]
MIL-S501SC-30
5-Port 10/100BASE-TX + (1)
100BASE-FX single mode (SC)
[30 km/18.6 miles]
Simple Configuration
Flow control minimizes packet loss, while all copper ports
auto negotiate for speed.
MIL-S501SC-60
5-Port 10/100BASE-TX + (1)
100BASE-FX single mode (SC)
[60 km/37.3 miles]
MIL-S801ST
8-Port 10/100BASE-TX + (1)
100BASE-FX multimode (ST)
[2 km/1.2 miles]
Specifications
Standards Compliance
IEEE 802.3 10BASE-T;
IEEE 802.3u 100BASE-TX/FX
System LEDs
Power, Speed, Link, Activity, and
Duplex
Packet Forwarding
Store-and-Forward
MAC Address Support
4K
Packet Buffer Memory
256KB
Operating Temperature
0° to 45°C (32°F to 113°F)
Storage Temperature
-25°C to 70°C (-13°F to 158°F)
Operating Humidity
10% to 90% ( non-condensing )
Relative Humidity
10% to 90%
Chassis
Metal
Power Supply
MIL-S501 External
MIL-S801 Internal
AC Input Voltage
100 – 240 VAC
DC Output Power
9VDC, 700mA (MIL-S501)
Power Consumption
5.5 Watts maximum
Optional Accessories
Dimensions
MIL-S501:
Width: 6.5" [165mm]
Depth: 4.0" [100mm]
Height: 1.0" [24mm]
(sold separately)
Mounting Brackets:
MIL-S801:
Width: 9.8" [250 mm]
Depth:5.2" [132 mm]
Height: 1.5" [37 mm]
MIL-RMS801
Mounting bracket for MIL-S801
MIL-S501: 0.45 kg [1 lb.]
MIL-S801: 1.35 kg [3 lbs.]
Safety
UL, cUL, TUV
Emissions
FCC Class B, CISPR 22 Class B, CE Mark
Technical Support & Warranty
Free technical support and advanced warranty
support for 5 years. Includes free telephone
support, 24-hour support via web and ftp.
Visit our website at www.transition.com
MIL-S801SC
8-Port 10/100BASE-TX + (1)
100BASE-FX multimode (SC)
[2 km/1.2 miles]
MIL-S801SC-60
8-Port 10/100BASE-TX + (1)
100BASE-FX single mode (SC)
[60 km/37.3 miles]
Weight
< 156 >
Ordering Info
MIL-BRSW
Mounting bracket for MIL-S501
16 or 24-port 10/100BASE-TX Compact Switches
MILAN
unmanaged switches
MIL-S1600S &
MIL-S2400S
(16) or (24) 10/100BASE-TX ports
Automatic MDI/MDIX
Table of Contents
Select Media Converter
Select Switch
10/100 copper
10/100 with fiber
10/100/1000
10/100/1000 with fiber
Wire Speed Performance
Auto-Negotiation for Speed and Duplex
Store and Forward Architecture
Ruggedized metal chassis with internal power supply
Front panel LED status indicators
The MIL-S1600S and MIL-S2400S compact Fast
Ethernet Switches have sixteen or twenty-four
10/100 Base-TX ports with low latency and error-free
performance provided via an advanced store-andforward architecture. Other features include:
Automatic MDI / MDIX
Cable detection and correction is automatic as the
switch adjusts for straight-through or crossover
cables during installation—no uplink port necessary.
High-performance Switching
Non-blocking architecture assures rapid packet
delivery and the extensive 8,000 MAC address table
and memory buffering provide swift lookup and
packet forwarding.
Full Duplex Operation
Bandwidth for each port is effectively doubled,
increasing the speed of a 100Mbps port to
200Mbps.
Ordering Info
Flow Control
Enhances packet transmission by full-duplex flow
control and half-duplex back pressure, providing
congestion control on busy ports.
MIL-S2400S
24-port 10/100BASE-TX switch
“small form factor”
MIL-S1600S
16-port 10/100BASE-TX switch
“small form factor”
Rugged Chassis
Sturdy metal enclosures for added durability.
Straight Forward Diagnostics
Perpetual port status provided via LEDs to simplify
troubleshooting.
Standards
Conforms to IEEE 802.3, 802.3u, and 802.3x
standards.
Specifications
Ports
MIL-S1600S: 16 fixed 10/100BASETX ports: RJ-45 connectors
MIL-S4200S: 24 fixed 10/100BASETX ports: RJ-45 connectors
Standards
IEEE 802.3 10BASE-T; IEEE 802.3u
100BASE-TX/FX; IEEE 802.3x
Dimensions
Width: 9.8" [250 mm]
Depth: 5.2" [132 mm]
Height: 1.5" [37 mm]
Weight
3 lbs. [1.35 kg]
Chassis
Metal
Mounting
Desktop rubber feet
Packet Forwarding
Store-and-Forward
Safety
UL, cUL
Address Support
8K MAC entry
Emissions
FCC Class A, CE Mark
System LEDs
Power, Link/Activity
Power Supply
Switch Fabric
3.2Gbps for MIL-S1600S
4.8Gbps for MIL-S2400S
Universal AC power input: 100 to 240 VAC
50 – 60Hz; Output rate: +3.3V/3A
Latency
5 ms
Buffer Memory
512kb
Operating Temperature
Technical Support & Warranty
Free technical support and advanced warranty
support for 5 years. Includes free telephone
support, 24-hour support via web and ftp.
0 to 45°C ( 32°F to 113°F )
Storage Temperature -40°C to 70°C ( -40°F to 158°F )
Operating Humidity 10% to 90% ( non-condensing)
Relative Humidity
10% to 90%
Call us at 800-526-9267 or 952-941-7600
< 157 >
MILAN
unmanaged switches
5-port 10/100/1000BASE-T Unmanaged Switch
MIL-S5000T
(5) 10/100/1000BASE-T ports
Full wire speed reception and
transmission with 10 Gbps
backplane speed
Table of Contents
Select Media Converter
Select Switch
Supports IEEE802.3x Flow
Control for full duplex
Rugged metal chassis with
external power supply
The Most Affordable Way to Go Gig!
With Gigabit Ethernet rapidly gaining in popularity, we are
excited to offer a 5-Port Gigabit Ethernet switch that will
transform your current crawling Fast Ethernet network into
blazing fast network that runs at 1000 Mbps!
Five 10/100/1000BaseT Ports in a small footprint
The MIL-S5000T is a hard-working switch that delivers
exceptional performance. Right out of the box, this switch
can give you five 10/100/1000 Gigabit Ethernet ports and
best yet, it will take up as little desk space as your tiny USB
hub. Imagine transferring data/voice/multimedia files
across your network at 2 Gbps full duplex; the waiting
game is eliminated. Whether you need 10BaseT,
100BaseTX or 1000BaseT, this switch is ready to run with
any version of Ethernet over copper cabling.
Features:
(5) 10/100/1000BaseT ports
Small footprint takes up minimal desktop space
Compatible with any computers/laptop machines with an
Ethernet port
Supports Auto-MDI/MDIX which eliminates cabling
confusion
Performance, Performance, Performance
MILAN once again delivers the highest performance switch
in its class. A single integrated switch engine automatically
filters and forwards traffic at full line rate for all 5 ports
simultaneously.
Specifications
Connectors
(5) 10/100/1000 Mbps Gigabit
Ethernet (10BaseT, 100BaseTX,
1000BaseT): RJ-45
Status Indicators
Power plus 3 indicators per
RJ-45 port (link/activity,
10/100 Mbps, 1000 Mbps)
Performance
Flow Control: Supports IEEE802.3x Flow Control
Memory: Embedded 256KB packet buffer
Address Table: 8K entries
Case
Rugged metal chassis with deskmount kit included
Dimensions
Width: 6.7" [171 mm]
Depth: 3.9" [98 mm]
Height: 1.1" [29 mm]
< 158 >
Visit our website at www.transition.com
Standards Compliance
Network: IEEE 802.3z/ab Gigabit Ethernet over 4 pairs of UTP
Category 5 (1000BaseT); IEEE 802.3u Fast Ethernet over 2 pairs of
UTP Category 5 (100BaseTX); IEEE 802.3 Ethernet (10BaseT)
Expansion: Auto-Uplink (MDI/MDIX) on all five RJ-45 ports. Uplink
to additional switches using standard or crossover cables
Operating Temperature
32° to 104° F (0° to 40° C)
Relative Humidity
10% to 90% non-condensing
Power
External power supply; Output: DC 7.5V/1.5A;
Consumption: 8.5 watts (max.)
Emissions
FCC Class A and CE Mark
Warranty
5-year product warranty covers defects in
manufacturing and workmanship; Technical
Support: 5 years of free telephone support
plus 24-hour support via web
Ordering Info
MIL-S5000T
5-port 10/100/1000BASE-T switch
8-Port 10/100/1000BASE-T Compact Workgroup Switch
MILAN
unmanaged switches
Internal Power Supply
10/100 copper
10/100 with fiber
MIL-S8TA
(8) 10/100/1000BASE-T ports
Small Form factor
Table of Contents
Select Media Converter
Select Switch
10/100/1000
NEW
10/100/1000 with fiber
8 10/100/1000BaseT Auto-negotiating ports
Auto-MDI/MDIX which eliminates cabling confusion
Wall Mount Brackets
Specifications
Standards Compliance
Network: IEEE 802.3 2002
Physical Characteristics
Enclosure Case
Rugged metal chassis
Dimensions
Width: 6.5" [165 mm]
Depth: 4.0" [100 mm]
Height: 1.3" [33 mm]
Internal Power Supply
AC 100 – 240V, 50/60Hz
Connectors
(8) 10/100/1000 Mbps Gigabit
Ethernet
(10BASE-T, 100BASE-TX, 1000BASET) RJ-45
Status Indicators
3 indicators per RJ-45 port:
Link/Activity, 10/100 Mbps,
1000 Mbps
Performance
Flow Control
CoS
Memory
MAC Address Table
MDI/MDI-X
Environmental Range
Operating Temperature
Relative Humidity
Power
Power Consumption
Emissions
32° to 113°F (0° to 45°C)
10% to 90% non-condension
Internal power supply
7.6 watts (max.)
FCC Class A and CE Mark
Ordering Info
MIL-S8TA
8-port 10/100/1000BASE-T switch
Technical Support & Warranty
Free technical support and advanced
warranty support for 5 years.
Includes free telephone support, 24hour support via web and ftp.
Supports IEEE802.3x Flow Control
Two queues, WRR 4:1
Embedded 144KB packet buffer
8K entries
Auto
Call us at 800-526-9267 or 952-941-7600
< 159 >
8-port 10/100/1000BASE-T Gigabit Switch
MILAN
unmanaged switches
with console management
MIL-S8000G
(8) 10/100/1000BASE-T ports
10/100/1000Mbps - All Ports
Store and Forward Architecture
Automatic MDI/MDIX
Light Console Management
Wire Speed Performance
Port-based VLANs
Auto-Negotiation for Speed and
Port Mirroring
Duplex
Port Trunking
Gigabit Ethernet over copper technology is a cost-effective
way to upgrade network equipment from Fast Ethernet to
Gigabit speeds. By using standard 4-pair Category 5 copper
cabling, you don’t need to pull expensive fiber optic
cabling. This technology will create high-speed backbone
connections between switches, servers, database and end
stations.
The MILAN MIL-S8000G Gigabit Ethernet Switch has eight
10/100/1000 Base-TX ports with low latency and error-free
performance provided via an advanced store-and-forward
architecture.
Other features include:
Automatic MDI / MDIX: Cable detection and correction is
automatic as the switch adjusts for straight-through or
crossover cables during installation - no uplink port
necessary
High-performance Switching: Non-blocking architecture
backplane of 16G assures rapid packet delivery and the
extensive 8,000 MAC address table and memory buffering
provide swift lookup and packet forwarding.
Full Duplex Operation: Bandwidth for each port is
effectively doubled, increasing the speed of a 1000Mbps
port to 2000Mbps
Flow Control: Enhances packet transmission by fullduplex flow control and half-duplex back pressure,
providing congestion control on busy ports
Console Management: Light management via the
console port- Port Status, Port configuration, Port-based
VLANs, Port trunking, Port Mirroring, Aging
Rugged Chassis: Standard 19-inch rackmount design
with mounting brackets included
Standards: Conforms to IEEE 802.3, 802.3u, 802.3ab
and 802.3x standards
Power: Internal Power Supply
LED Indicators: Front side LEDs provide system status
on Power along with 100M, 1000M, LK/ACT and FD per
port
Specifications
Ports
8 fixed 10/100/1000BASE-TX ports:
RJ-45 connectors
Standards
IEEE 802.3 10BASE-T; IEEE 802.3u
100BASE-TX; IEEE 802.3x Flow
Control; IEEE 802.3ab 1000BASE-T
Packet Forwarding
Store-and-Forward
Address Support
8K MAC entry
System LEDs
Unit: Power
Per Port: 100, 1000, Link/Activity,
Full Duplex/ Collision
Switch Fabric
16 Gbps
Buffer Memory
512kb
Operating Temperature
0 to 45°C ( 32°F to 113°F )
Storage Temperature
-40°C to 70°C ( -40°F to 158°F )
Operating Humidity
Relative Humidity
< 160 >
10% to 90% ( non-condensing)
10% to 90%
Visit our website at www.transition.com
Dimensions
Width: 17.4" [440 mm]
Depth: 8.8" [224 mm]
Height: 1.75" [44 mm]
Weight
2.9 kg (6.4 lbs)
Chassis
Metal
Mounting
Desktop rubber feet included
Rackmount kit included
Safety
UL, cUL
Emissions
FCC Class A, CE Mark
Internal Power Supply
Universal AC power input: 100 to
240 VAC 50-60Hz
Power Consumption 30 Watts maximum
Technical Support & Warranty
Free technical support and advanced warranty
support for 5 years. Includes free telephone
support, 24-hour support via web and ftp.
Table of Contents
Select Media Converter
Select Switch
Ordering Info
MIL-S8000G
8-port 10/100/1000BASE-T switch with
console management
8-port 10/100/1000BASE-T Gigabit Smart Switch
MILAN
unmanaged switches
with SFP uplink slot
10/100 copper
10/100 with fiber
MIL-S8001TG
(8) 10/100/1000BASE-T ports + (1) SFP slot
SMART features include:
Ruggedized metal chassis with
console Management, 4K VLANs,
QoS, and Broadcast Storm
Filtering.
Internal power supply
10/100/1000
10/100/1000 with fiber
Front panel LED status
indicators
Table of Contents
Select Media Converter
Select Switch
Full wire speed reception and
transmission with 16 Gbps
backplane speed.
The Smart Choice for Flexible, Gigabit
Ethernet!
Smart Connectivity
Like all MiLAN unmanaged switches, the MIL-S8001TG is
completely plug-and-play; no configuration is required for
basic operation. Advanced configurations can be accessed
through MiLAN’s easy to use menu-driven management
system.
With Gigabit Ethernet rapidly becoming the de facto
standard, MiLAN Technology is proud to introduce our new
8-Port Gigabit Ethernet switch. The new MIL-S8001TG will
transform your current Fast Ethernet network into a blazing
fast Gigabit Ethernet network that runs at 1000 Mbps!
Advanced Features
Console-Managed: All advanced features are accessible
from an easy-to use console interface. No cryptic
command line commands or third party network
management applications required.
Converge Copper and Fiber Gigabit Networks
The MIL-S8001TG is a hard-working switch that delivers
exceptional performance. Right out of the box, the MILS8001TG gives you eight 10/100/1000 Gigabit Ethernet
ports and a Mini-GBIC slot that will interface with any
industry-standard Small-Form-Pluggable Gigabit Ethernet
Interface transceivers. The addition of the Mini-GBIC slot
allows for flexible Gigabit fiber deployment by converging it
with cost-effective Gigabit copper connectivity. Imagine
transferring data/voice/multimedia files across your
network at 2 Gbps full duplex per port, the waiting game is
over.
Specifications
Connectors
Ordering Info
MIL-S8001TG
8-port 10/100/1000BASE-T switch with
(1) SFP uplink slot
Optional Accessories
(sold separately)
SFP Modules (see pages 135-136)
VLAN: Supports 4K 802.1Q tagged-based VLANs plus
port-based VLANs
Quality of Service (QoS): 802.1p/TOS support efficiently
control network resources by classifying traffic and
prioritizing network traffic flows
Supports Broadcast Storm Filtering that eliminates
unnecessary network traffic
Increase network performance with 9.5KB Jumbo Frame
support
Software Features (cont’d.)
Queue Ratio: High / Middle / Low/ Lowest=8/4/2/1
Copper: Eight 10/100/1000 Mbps
Gigabit Ethernet (10BaseT,
100BaseTX, 1000BaseT): RJ-45
Fiber: One Industry-Standard SmallForm-Pluggable GBIC transceiver slot
Trunking: Supports one trunk group, and the trunk member can be
Port(5,6,7,8),Port(6,7,8) or Port(7,8)
Broadcast Storm: Disable or Enable (Supports rate setting)
Case
Ruggedized metal chassis
Status Indicators
RJ-45: Power plus 3 indicators per
RJ-45 port (link/activity, 10/100/1000
Mbps, Duplex/Collision)
Dimensions
Width: 250 mm
Depth: 132 mm
Height: 37 mm
Mini-GBIC: Link/Activity
Power
Console
RS-232
Internal Universal power supply; Input: 90 – 240V,
50/60Hz; Output: DC 5 V/4 A (internal)
Performance
Efficiency: Gigabit Switching (1.488,000 pps) and Fast
Ethernet Switching (148,800 pps)
Flow Control: Supports IEEE802.3x Flow Control (FullDuplex) and Back Pressure (Half-Duplex)
Switch Architecture: Single-Chip non-blocking wirespeed design, 16 Gbps Backplane
Power Consumption
22 watts (max.)
Standards Compliance
Network:
IEEE 802.3ab 1000BaseT, IEEE 802.3u 100BaseTX;
IEEE 802.3 10BaseT; IEEE 802.3z 1000BaseSX/LX;
IEEE 802.3x Flow Control; IEEE 802.1p Quality of
Service; IEEE 802.1Q Tag VLAN
Expansion:
Auto-MDI/MDIX on all eight RJ-45 ports. Uplink to
additional switches using standard or crossover cables
Memory Embedded: 1.5Mb packet buffer
Mini-GBIC slot: Compatible with industry standard small-formpluggable GBICs for a wide variety of fiber connections
and distances
Address Table: 4K entries
Emissions:
FCC Class A and CE Mark
Safety:
EN60950
Software Features
VLAN: Port Based VLAN up to 8 groups; 4K
IEEE802.1Q Tag VLAN
Quality of Service (QoS): 2 Types of quality of service:
1.Port based priority. 2. 802.1p/TOS priority tag.
Priority Queue: System provides 4 queues for High
and Low priority.
Call us at 800-526-9267 or 952-941-7600
Operating Temperature
32° to 113°F (0° to 45°C)
Relative Humidity
10% to 90% non-condensing
Warranty
5-year product warranty covers defects in
manufacturing and workmanship; 5 years of
free telephone support plus 24-hour support
via web.
< 161 >
MILAN
unmanaged switches
24-port 10/100/1000BASE-T Switches with (2) SFP uplink slots
MIL-S24T2GPA
(24) 10/100/1000BASE-T ports + (2) SFP slots
Full wire speed reception and
transmission with 48 Gbps
backplane speed
2 SFP Combo Ports for Optical
Ruggedized metal chassis with
external power supply
Supports IEEE802.3x Flow
Control for full duplex
Connectivity
JUMBO Frames Support
802.1x Flow Control
Full Duplex Pause
Half Duplex Backpressure
Internal Power Supply
Front panel LED status
indicators
Next Generation of Copper and Fiber
Switching
The switch provides 48Gbps Gigabit switching
performance with an added benefit of combining
copper and fiber interfaces in a compact 1U design.
The MIL-S24T2GPA delivers cost-efficient switching
capability for 24 ports of Copper Gigabit Ethernet
and two combo ports for SFP based Gigabit
Ethernet.
Two Combo SFP Ports
The switch enables fiber connectivity through two
hot-swappable Small Form-factor Pluggable (SFP)
gigabit interfaces.
With Gigabit Ethernet rapidly gaining in popularity,
network administrators are demanding higher
density 10/100/1000 Mbps switches.
Ordering Info
(24) 10/100/1000BASE-T Ports
The MIL-S24T2GPA is a hard-working switch that
delivers exceptional performance. Combining wirespeed switch fabric together with shared memory
architecture design, they eliminate head-of-line
blocking and easily out perform other first
generation Gigabit switches using old-fashioned
“bridge” architecture. Whether you need 10BASE-T,
100BASE-TX or 1000BASE-T, this switch is ready to
run with any version of Ethernet over copper cabling.
Performance, Performance, Performance
MiLAN by Transition Networks delivers the highest
performance switch in its class. A single integrated
switch engine automatically filters and forwards
traffic at full line rate for all 24 ports simultaneously.
With a Jumbo Frame compatible network
infrastructure, you’ll be transferring data at Ethernet
Packet of 9 KB instead of 1.5KB—that’s almost 4X
larger than conventional switches.
Specifications
Connectors
MIL-S24T2GPA: (24) 10/100/1000 Mbps Gigabit
Ethernet (10BaseT, 100BaseTX, 1000BaseT):
RJ-45 plus 2 SFP combo open slots for
1000Base-x, optical or copper SFP modules
Status Indicators
Power plus LED indicators per
RJ-45 port (duplex, link/activity,
10/100 Mbps, 1000 Mbps)
Performance
Backplane Speed: 48 Gbps
Switch Architecture: Shared memory
Maximum Frame Size: 9 KB Jumbo Frame
Filtering and Forwarding: Includes multi-layer filtering
and forwarding
Forwarding Table: 8K MAC addresses
RAM Buffer: 4Mbps
Case
< 162 >
Table of Contents
Select Media Converter
Select Switch
Ruggedized Metal Chassis
Visit our website at www.transition.com
Dimensions
Width: 17.3" [440 mm]
Depth: 6.33" [161 mm]
Height: 1.7" [44 mm]
Weight
8.25 lbs.
Standards Compliance
Network: IEEE 802.3ab Gigabit Ethernet over 4 pairs of UTP
Category 5 (1000BaseT);
IEEE 802.3z Gigabit Ethernet over Fiber optics
(1000Base-SX/LX);
IEEE 802.3u Fast Ethernet over 2 pairs of UTP Category 5
(100BaseTX);
IEEE 802.3 Ethernet (10BaseT)
Protocol: CSMA/CD
Expansion: Auto-MDI/MDIX on all RJ-45 ports
Operating Temperature
32° to 104° F (0° to 40° C)
Relative Humidity
10% to 95% non-condensing
Power
100 – 240 VAC, 50/60 Hz, internal switching
supply
Power Consumption
47 watts (max.)
Emissions
FCC Class A and CE Mark
Warranty
Five-year product warranty covers defects in
manufacturing and workmanship; Five-year
technical support plus 24-hour support via
web
MIL-S24T2GPA
24-port 10/100/1000BASE-T switch
with (2) SFP uplink ports
Optional Accessories
(sold separately)
SFP Modules (see pages 135-136)
MILAN
poe products
Table of Contents
Select Media Converter
Select Switch
Power Over Ethernet (PoE) Injectors & Splitters
poe injectors & splitters
MIL-x100x
Power Over Ethernet (PoE) Injectors & Splitters
Ensures uninterrupted network
operation by providing a "power safe"
path to the user
Furnishes easy and cost-effective
installation with fewer cables and
electrical outlets
Intelligent detection process to
detect Power over Ethernet enabled
terminals and protect legacy
endpoints
1U height and 19" Rack mountable
(MIL-L800i only)
3x/as400 repeaters
cabling connectors & baluns
patch cords
reference
Provides one central secure
location for power
(MIL-L800i & MIL-L100i)
Best Way to Bring Power to Your Network
MILAN by Transition’s new EmPowered Ethernet™ Series
Power over Ethernet solutions deliver unified supply of data,
voice, and video as well as electrical power through a single
source by sending power over standard Category 5 and
above twisted pair cables. Power over Ethernet simplifies
installation and eliminates the need to run separate power
cords and LAN cables to each Access Point or port
locations.
reduce cabling and outlet requirements while providing the
lowest total cost of ownership.
Legacy Installation: ensures safe delivery of power to
existing legacy devices as well as power-enabled terminals.
MIL-L800i
EmPowered™ Ethernet 8-Port POE
Injector Hub
Our PoE products provide organizations with affordable,
easy-to-use solutions that enable them to migrate their
network infrastructure to support a growing number of
advanced cost-saving, performance enhancing applications,
such as streamlining wireless, VOIP, Network IP camera
deployments, and centralized power backup solutions.
Whether on a factory floor or in an enterprise facility,
running power to hard to reach locations with MILAN by
Transition’s Power over Ethernet solutions significantly
Preservation of Cabling Infrastructure: avoids altering
existing wiring and does not damage cabling infrastructure
already in place.
MIL-L100s
EmPowered™ Ethernet 1-port POE Dual
Voltage Splitter (5v/12V)
IEEE802.3af Compliant
The EmPowered Ethernet™ Series Power over Ethernet
solutions are IEEE802.3af compliant, which means that you
are ensured of the following:
Ordering Info
MIL-L100i
EmPowered™ Ethernet 1-port POE
Injector
Data Integrity: Power delivery over Ethernet cables does not
cause data degradation or loss of data integrity.
Power Shut Off: When data is disconnected POE power is
not provided to the PD device. This provides and easy PD
reset option.
Specifications
Specifications
MIL-L100i
MIL-L800i
Specifications
MIL-L100s
Standards
IEEE802.3af Compliant
IEEE802.3 10BASE-T
IEEE 802.3u 100BASE-TX
Standards
IEEE802.3af Compliant
IEEE802.3 10BASE-T
IEEE 802.3u 100BASE-TX
Standards
IEEE802.3af Compliant
IEEE802.3 10BASE-T
IEEE 802.3u 100BASE-TX
LEDs
System: Power
Management
Microsoft® Windows-based utility for
power management
LEDs
System: Power
Ports
• (1) DATA IN RJ-45 Ethernet Port
• (1) DATA OUT PoE Injector RJ-45
Ethernet Port
• (1) POWER OUT JACK, 5.5x2 mm
Dip Switch
5V/12V Dip switch
Ports
• (1) DATA IN RJ-45 Ethernet
Port
• (1) DATA OUT PoE Injector
RJ-45 Ethernet Port
Cable Requirements
10BASE-T: 2-pair UTP/STP
Cat.3,4,5 cable
EIA/TIA-568 100-ohm(100
m)
100BASE-TX: 2-pair
UTP/STP Cat.5 cable
EIA/TIA-568 100-ohm(100
m)
Weight
200g
Dimensions
Width: 117 mm
Depth: 60 mm
Height: 35 mm
Power Output
-48 VDC, 300 mA
Power Input
AC 100~240V, 50~60Hz,
0.3A
Power Management Functions
• Current ports serviced list
• System total serviced power budget
• Power port disable/ enable
• Power support priority
• Power overload auto shut down
• Power port operation status
• Power consumption limit
LEDs
System: Power
Per Port: Port Forwarding, Power Off
Ports
• (8) DATA IN RJ-45 Ethernet Ports
• (8) DATA OUT PoE Injector RJ-45 Ethernet Ports
• (1) RS-232 Console Port
Cable Requirements
10BASE-T: 2-pair UTP/STP Cat.3,4,5 cable;
EIA/TIA-568 100-ohm(100 m)
100BASE-TX: 2-pair UTP/STP Cat.5 cable;
EIA/TIA-568 100-ohm(100 m)
Weight
2.7 kg
Operating Environment 0~ 40°C , 90% Relative
Humidity (non-condensing)
Dimensions
440 mm x 224 mm x 44 mm (W x D x
H)
Storage Temperature
Mounting
19" rack mountable
Power Output
• -48 VDC via Pins (+)4/5:(-)7/8
• Current (per port max.): 350mA @
48VDC
Power Input
AC 100~240V, 50/60 Hz, IEC power
socket with fuse and power switch
EMI and Safety
0~70°C, 95% Relative
Humidity (non-condensing)
FCC Class B, CE Mark; UL,
cUL, CE/EN60950
Cable Requirements 10BASE-T: 2-pair UTP/STP Cat.3,4,5
cable; EIA/TIA-568 100-ohm(100 m)
100BASE-TX: 2-pair UTP/STP Cat.5
cable; EIA/TIA-568 100-ohm(100 m)
Weight
150g
Dimensions
Width: 80 mm
Depth: 55 mm
Height: 26 mm
Power Output
5 (default) or 12 VDC
Power Input
-48 VDC
Operating Environment
0~ 40°C , 90% Relative Humidity
(non-condensing)
Storage Temperature
0~70°C, 95% Relative Humidity
(non-condensing)
EMI and Safety
FCC Class B, CE Mark, CE/EN60950
Power Consumption 130 Watts Maximum
Operating Environment
0~45°C, 10~90% Relative Humidity
(non-condensing)
Storage Temperature
0~70°C, 95% Relative Humidity
(non-condensing)
EMI and Safety
Call us at 800-526-9267 or 952-941-7600
FCC Class A, CE Mark; UL, cUL ,
CE/EN60950
< 163 >
Table of Contents
Select Media Converter
Select Switch
Fiber Optic Patch Cords
networking
cables
FPC-xxx-xxxx-xxM
Ordering Info
FPC-____-____-__M
Length
Cable Type
Transition Networks's high-quality fiber optic patch
cords are designed to meet or exceed industry
specifications and are offered in a wide variety of
connector styles, fiber types and lengths. Each cable
assembly is 100% optically inspected, tested and
individually packaged with descriptive labeling and
test results included.
xx
MD5
Multimode 50/125µm duplex
MD6
Multimode 62.5/125µm duplex
SD
Single Mode 8/125µm duplex
MD5G
Multimode 50/125µm duplex
(10-Gigabit Optimized)
Length in meters
Available lengths:
1, 2 and 3 meters
Note: Other lengths may
be available upon request.
Connector Type
Features
LC
MT
SC
ST
10-Gigabit Ethernet laser-optimized multimode
cable for runs up to 550 meters. Ideal for campus
LAN backbone and storage area network (SAN)
applications.
Factory terminated and 100% optical testing to
guarantee test results.
Individually packaged with IL and RL test results
included.
Available fiber types include single mode 8/125µm
and multimode 50/125µm or 62.5/125µm.
Lifetime Warranty
LC/PC
MT-RJ/PC
SC/PC
ST/PC
(List each end separately.)
Examples:
FPC-MD6-LCMT-03M
Fiber Patch Cord, duplex multimode 62.5/125µm, LC to MT-RJ, 3 meters long
FPC-SD-SCSC-01M
Fiber Patch Cord, duplex single mode 8/125µm, SC to SC, 1 meter long
Specifications
Multimode Fiber
Standards
Specifications
ITU-T G.651; IEC 60793-2-10
Type A1A.1, A1B
Multimode Fiber (10-Gigabit Optimized)
Specifications
Single Mode Fiber
Standards
Standards
TIA/EIA-492-AAAC; IEC 60793-2-10
Type A1A.2; ISO/IEC 11801 OM-3
Telcordia GR-20, GR-326-CORE;
TIA/EIA-492-CAAB; ITU-T G.652.D;
IEC 60793-2-50 Type B1.3
Fiber Optic Connector Specs
Max. Insertion Loss: < 0.5 dB
Max. Insertion Loss: < 0.7 dB
(MT-RJ only)
Typical Insertion Loss: < 0.3 dB
Fiber Optic Connector Specs
Max. Insertion Loss: < 0.5 dB
Max. Insertion Loss: < 0.7 dB
(MT-RJ only)
Typical Insertion Loss: < 0.3 dB
Fiber Optic Cable Specs
Fiber Optic Cable Specs
Fiber Optic Connector Specs
Max. Insertion Loss: < 0.3 dB
Typical Insertion Loss: < 0.2 dB
Max. Reflectance: < -55.0 dB
Typical Reflectance: < -57.0 dB
Core/Cladding Diameter 50/125µm or 62.5/125µm
Core/Cladding Diameter 50/125µm
Fiber Optic Cable Specs
Jacketing
2mm or 3mm tight buffered,
OFNR, orange PVC (diameter will
depend on connector type)
Jacketing
Core/Cladding Diameter 8.3/125µm
50/125µm: 500MHz/km @
850nm; 500MHz/km @ 1300nm
62.5/125µm: 160MHz/km @
850nm; 500MHz/km @ 1300nm
Bandwidth
Max: 3.5 dB/km @850nm; 1.5
dB/km @1300nm
Typical: 3.0 dB/km @850nm; 1.0
dB/km @1300nm
Attenuation
Length specified:
+ 0.15m (+6.0") / -0.0m (-0.0")
Environment
Warranty
Bandwidth
Attenuation
Length Tolerance
< 164 >
2mm or 3mm tight buffered, OFNR,
purple PVC (diameter will depend on
connector type)
Jacketing
LED w/OFL: 3500MHz/km @ 850nm;
500MHz/km @ 1300nm
Laser: 4700MHz/km @ 850nm;
500MHz/km @ 1300nm
2mm or 3mm tight buffered, OFNR,
yellow PVC (diameter will depend on
connector type)
Attenuation
Max: 0.35 dB/km @ 1310nm;
0.21 dB/km @ 1550nm
Length Tolerance
Max: 2.4 dB/km @ 850nm; 0.6 dB/km
@ 1300nm
Typical: 2.0 dB/km @ 850nm; 0.5
dB/km @ 1300nm
Length specified:
+ 0.15m (+6.0") / -0.0m (-0.0")
Environment
-40°C to +85°C operating
temperature, 5% – 95% humidity
non-condensing
Length Tolerance
Length specified:
+ 0.15m (+6.0") / -0.0m (-0.0")
Warranty
Lifetime
-40°C to +85°C operating
temperature, 5% – 95% humidity
non-condensing
Environment
-40°C to +85°C operating
temperature, 5% – 95% humidity
non-condensing
Lifetime
Warranty
Lifetime
Visit our website at www.transition.com
networking
cables
Table of Contents
Select Media Converter
Select Switch
Copper Patch Cords
CPC-xxxx-xxF
poe injectors & splitters
3x/as400 repeaters
cabling connectors
patch cords
reference
Features
Snagless, molded boots provide strain
relief and prevent kinking as well as snagless
cable mining.
All Cat5e cables tested to 350MHz; Cat6
cables tested to 250MHz.
All have 4-pair, 24 AWG construction with
RJ-45 connectors.
Available in both straight or crossover
pinning.
Lifetime Warranty
Specifications
Standards
TIA/EIA-568-A, B
Ordering Info
CPC-____-__F
Length
Cable Type
5EB
X5ER
6B
X6R
xx
Cat 5e Straight-through
Length in feet
03 = 3 ft. [0.91 m]
Cat 5e Crossover
Available lengths:
1, 2, 3, 5 and 10 feet
Cat 6 Straight-through
Cat 6 Crossover
Cable Specs Cat 5e
Cable Type
4-pair UTP
Conductor Gauge
24 AWG, stranded
Notes:
All cables include molded boot; same color as the cable.
Jacket
PVC, 80C, OD=5.3mm
Standard color for straight-through cables is black.
Frequency
up to 350MHz
Standard color for crossover cables is red.
Impedance
100 +/- 15 ohms
Attenuation (max.)
24dB/100m @ 100MHz;
49dB/100m @ 350MHz
Custom colors and lengths may be available upon request.
Cable Specs Cat 6
Cable Type
4-pair UTP
Conductor Gauge
24 AWG, stranded
Jacket
PVC, 80C, OD=6.2mm
Frequency
up to 250MHz
Impedance
100 +/- 15 ohms @ 100MHz
Attenuation (max.)
24dB/100m @ 100MHz;
39dB/100m @ 250MHz
Length Tolerance
Length specified +/- 2%
Environment
-40°C to +85°C operating
temperature, 5% – 95% humidity
non-condensing
Warranty
Lifetime
Call us at 800-526-9267 or 952-941-7600
< 165 >
Fiber Optic Reference Guide
Calculating
Table of Contents
Select Media Converter
Select Switch
Fiber Loss and Distance Estimates
There are a number of ways to tackle the problem of determining the power
requirements for a particular fiber optic link. The easiest and most accurate way
is to perform an Optical Time Domain Reflectometer (OTDR) trace of the actual
link. This will give you the actual loss values for all events (connectors, splices
and fiber loss) in the link. In the absence of an actual OTDR trace, there are two
alternatives that can be used to estimate the power requirements of the link:
1. Estimate the total link loss across an existing fiber optic link if the fiber length
and loss variables are known.
2. Estimate the maximum fiber distance if optical budget and loss variable are
known.
Loss variables are connectors, splices and attenuation per kilometer of the fiber.
If actual values for all of the loss variables are not known, an estimation for each
is needed to complete the calculations. In this case, one would want to take a
worst case approach to assure that there is adequate power available for the link.
The following table includes commonly accepted loss values used in these
calculations:
Fiber Type
Multimode
50/125µm
Wavelength
Fiber attenuation Fiber attenuation
/ km *
/ km #
Connector
Loss
Splice Loss
850nm
3.5 dB
2.5 dB
0.75 dB
0.1 dB
1300nm
1.5 dB
0.8 dB
0.75 dB
0.1 dB
Multimode
62.5/125µm
850nm
3.5 dB
3.0 dB
0.75 dB
0.1 dB
1300nm
1.5 dB
0.7 dB
0.75 dB
0.1 dB
Single Mode
9µm
1310nm
0.4 dB
0.35 dB
0.75 dB
0.1 dB
Single Mode
9µm
1550nm
0.3 dB
0.22 dB
0.75 dB
0.1 dB
*These values are per TIA/EIA and other industry specifications and are the values used by
Transition Networks in all link loss calculations.
#These values are one example of the performance that can be obtained with a new fiber
installation.
The IEEE also recommends maximum cable distances as defined in the table
below:
Standard
Data Rate
(Mbps)
Cable Type
IEEE Standard
Distance
2 km
10BASE-FL
10
850nm Multimode 50/125µm or 62.5/125µm
100BASE-FX
100
1300nm Multimode 50/125µm or 62.5/125µm
2 km
100BASE-SX
100
850nm Multimode 50/125µm or 62.5/125µm
300 m
1000BASE-SX
1000
1000BASE-LX
1000
1000BASE-LH
1000
850nm Multimode 50/125µm
550 m
850nm Multimode 62.5/125µm
220 m
1300nm Multimode 50/125µm or 62.5/125µm
550 m
1310nm Single mode 9/125µm
5 km
1550nm Single mode 9/125µm
70 km
Transition Networks assumes the multimode standard distances defined by IEEE
for all of its products.
Fiber Optic Definitions
Before discussing actual fiber optic budget
calculations, please review the following
commonly used terms:
Maximum Transmit Power The maximum
output power in dBm (decibels relative to
1mW) of the optical
transmitter/transceiver. This is abbreviated
as Max TX PWR in the connector
specifications listed in this catalog.
Minimum Transmit Power The minimum
output power in dBm (decibels relative to
1mW) of the optical
transmitter/transceiver. This is abbreviated
as Min. TX PWR in the connector
specifications listed in this catalog.
Launch Power The actual output power in
dBm (decibels relative to 1mW) of the
optical transmitter/transceiver. This value
will reside somewhere within the max. and
min. transmit power levels listed.
Receive Sensitivity The minimum input
power in dBm (decibels relative to 1mW)
necessary to correctly drive the optical
receiver. This is abbreviated as RX
Sensitivity in the connector specifications
listed in this catalog.
Maximum Receive Power The maximum
input power in dBm (decibels relative to
1mW) the optical receiver can safely accept
without overdriving the receiver. This is
abbreviated as Max In PWR in the
connector specifications listed in this
catalog.
Link Budget The amount of power
available for dissipation over the fiber link
between end devices. It is calculated using
worst case assumptions by subtracting the
receive sensitivity from the minimum
transmit power.
Link Loss The total amount of power
dissipation over the fiber link between end
devices. It is calculated using maximum
loss values for distance, splices and
connectors.
Splice Loss The amount of power loss
attributable to a fiber optic spliced
connection.
Connector Loss The amount of power loss
attributable to a fiber optic connector pair.
Attenuation The amount of power loss per
kilometer over the fiber link. Attenuation is
wavelength specific and will depend greatly
on type and condition of the optical fiber
found in the link.
Safety Margin It is common practice to
add a couple of dB loss as a safety buffer
to account for items such as fiber aging,
splice and connector degradation over time
and environmental factors such as
temperature and humidity.
< 166 >
Visit our website at www.transition.com
Fiber Optic Reference Guide
Calculating
Fiber Loss and Distance Estimates
Estimate Total Link Loss
This calculation will estimate the total link loss through a particular fiber optic
link where the fiber length, as well as the number of splices and connectors, are
known. This calculation is simply the sum of all worst-case loss variables in the
link:
Link Loss =
Table of Contents
Select Media Converter
Select Switch
wireless products
poe injectors & splitters
3x/as400 repeaters
cabling connectors
patch cords
reference
[fiber length (km) x fiber attenuation per km] +
[splice loss x # of splices] +
[connector loss x # of connectors] + [safety margin]
For example: Assume a 40 km single mode link at 1310nm with 2 connector
pairs and 5 splices.
Link Loss =
[40km x 0.4dB/km] + [0.1dB x 5] + [0.75dB x 2] + [3.0dB]
= 21.0dB
In this example, an estimated 21.0 dB of power would be required to transmit
across this link. Of course, it is very important to measure and verify the actual
link loss values once the link is established to identify any potential performance
issues.
Estimate Fiber Distance
This calculation will estimate the maximum distance of a particular fiber optic
link given the optical budget and the number of connectors and splices contained
in the link:
Fiber Length =
[Optical budget] - [link loss]
[fiber loss/km]
Fiber Length =
{[(min. TX PWR) - (RX sensitivity)]
- [splice loss x # of splices]
- [connector loss x # of connectors]
- [safety margin]}
÷ [fiber lost/km]
For example: Assume a Fast Ethernet Single mode link at 1310nm with 2
connector pairs and 5 splices.
Fiber Length =
[(-8.0dB) - (-34.0dB)] - [0.1dB x 5] - [0.75dB x 2] - [3.0dB]
[0.4dB/km]
Fiber Length =
[26.0dB] - [0.5dB] - [1.5dB] - [3.0dB] = 52.5 km
[0.4dB/km]
In this example, an estimated 52.5 km distance is possible before dissipating the
optical power to a value below the Rx sensitivity. As always, it is very important
to measure and verify the actual link loss values once the link is established to
identify any potential performance issues. Actual maximum distances will very
depending on:
Actual optical fiber attenuation per km
Optical fiber design and age
Quality of connectors and actual loss per pair
Quality of splices and actual loss per splice
Quantity of splices and connectors in the link
Note: The recommended fiber distances listed in this catalog are based on
calculations similar to those shown above. These distances are a suggestion at
best and are no substitute for actual measurements of link loss using an OTDR
or other similar optical loss test sets. Transition Networks has no way of
guaranteeing distance results due to the myriad of variables involved in a fiber
link loss calculation.
Call us at 800-526-9267 or 952-941-7600
< 167 >
Switching Terminology / Feature Glossary
Feature / Protocol
< 168 >
Known As
Standard
Table of Contents
Select Media Converter
Select Switch
Description
Auto-Negotiation
N-WAY Protocol
IEEE 802.3u
With Auto-Negotiation in place, Ethernet can determine the common set of options
supported between a pair of "link partners." Twisted-pair link partners can use AutoNegotiation to figure out the highest speed that they each support as well as
automatically setting full-duplex operation if both ends support that mode.
Auto MDI / MDIX
Auto MDI / MDIX
-
Auto MDI/MDIX automatically detects the MDI or MDIX setting on a connecting
device in order to obtain a link. This means installers can use either a straight
through or crossover cable when connecting to any device.
Flow Control
Flow Control
IEEE 802.3X
Prevents congestion and overloading when a sending port is transmitting more
data than a receiving port can receive.
Port Labeling
Port Labeling
-
The ability to assign names to ports through the management interface.
IP Stacking
IP Stacking
Proprietary
The capability to stack multiple switches together and manage them under one IP
address.
Jumbo Frames
Jumbo Frames
-
Jumbo frames are frames larger than the standard Ethernet frame size, which is
1518 bytes (1522 if VLAN-tagged). Though this is not a standard, more and more
vendors are adding support for jumbo frames.
MAC Table Size
FDB, MAC
-
MAC Table, also known as Forwarding Data Base (FDB), is where switches store
learned addresses. The size of the MAC table determines how many unicast
streams the switch can support without flooding.
Static MAC Entry
Static MAC Entry
-
Static MAC entry support means that users can assign MAC addresses to ports
manually that never age out.
MAC-based Security
MAC Lockdown
-
MAC Lockdown is the ability to lock the learning mechanism down on a port. This
means that no further MACs will be learned on those ports.
Private Virtual-LAN
PVLANs
Proprietary
Private VLANs are the non standardized way of segmenting ports into separate
groups.
802.1Q Virtual-LAN
VLAN, VID, dot1Q
IEEE 802.1Q
802.1Q is a standardized way of segmenting and distributing VLAN information.
Switches that support 802.1Q can recognize, forward, a tag packets upon egress.
Max VLAN Support
Max VLANs
-
The number of VLANs supported on a single switch
GVRP
GVRP
Part of IEEE 802.1Q The GARP (Generic Attribute Registration Protocol) VLAN Registration Protocol
and IEEE 802.1p
(GVRP) defines a GARP application that provides the 802.1Q-compliant VLAN
pruning and dynamic VLAN creation on 802.1Q ports. GVRP is an application
defined in the IEEE 802.1P standard that allows for the control of 802.1Q VLANs.
Spanning-Tree
STP
IEEE 802.1D
Spanning-Tree Protocol prevents loops from being formed when switches are
interconnected via multiple paths.
Rapid Spanning Tree
RSTP
IEEE 802.1w
IEEE 802.1w Rapid Spanning Tree Protocol is an improvement to 802.1D standard
that provides faster spanning tree convergence after a topology change.
Link Aggregation
Control Protocol
LACP
IEEE 802.3ad
Link Aggregation Control Protocol allows you to bundle several physical ports
together to form a single logical channel. LACP allows a switch to negotiate an
automatic bundle by sending LACP packets to the peer.
Internet Group
Multicast Protocol
IGMP snooping
-
IGMP snooping allows a switch to "listen in" on the IGMP conversation between
hosts and routers. Based on the query and reports being passed through the
switch, a forwarding database for multicast is created.
IGMP Query Mode
IGMP Query Mode
-
IGMP Query Mode allows MILAN managed switches to advertise Multicast groups.
Port-based
Authentication
802.1X
IEEE 802.1X
802.1X allows each user's access to the LAN to be conditioned on who the user is,
not which Ethernet receptacle he or she happened to plug into.
L2/L3/L4 Access
Control List Port
Based
ACLs
-
ACLs allow administrators to create, permit and deny lists based on various traffic
characteristics such as Source MAC, Destination MAC, Source IP, Destination IP,
and UDP/TCP ports.
Remote Access Dial
In User Services
RADIUS
Authentication
RFC 2865 and RFC
2866
Allows secure centralized authentication management using UDP to the switches
management.
Terminal Access
Controller Access
Control System Plus
Authentication
TACACS +
Authentication
Cisco Proprietary
TACACS+ is Cisco’s proprietary implementation of centralized authentication using
TCP to access switch management.
Secure Shell
(Secured Telnet)
SSH
RFC 4251
SSH is used to provide a secure Telnet session to the console/command line
interface of a network device through an insecure environment.
Visit our website at www.transition.com
Switching Terminology / Feature Glossary
Feature / Protocol
Known As
Standard
Table of Contents
Select Media Converter
Select Switch
Description
Secure Sockets Layer SSL
(HTTPS)
RFC 2818
SSL is used to manage a network device via it’s web interface.
802.1p Prioritization
CoS
IEEE 802.1p
The ability to send traffic to various prioritization queues based on the 802.1q
VLAN Tag priority field.
CoS Queues
CoS Queues
IEEE 802.1p
Class of Service allows traffic to be directed into different priority levels or
“internal queues” in the switch on a particular network transaction. When network
traffic congestion occurs, the data assigned to a higher queue will get through
first.
Weighted Fair Queue
Forwarding
WFQ Forwarding
-
A method of scheduling the number of forwarding packets per CoS queued.
Strict Priority
Forwarding
SPF
-
A method of scheduling CoS queued traffic where high priority queues always take
precedence over low priority queues.
Differentiated Services DSCP / DiffServ
Prioritization
Prioritization
RFC 3290
The ability to prioritize traffic internally based on the DSCP field in the IP header of
a packet.
DiffServ Modification
DSCP / DiffServ
Remark
RFC 3290
The ability to change the DSCP field value on egress
IP Type of Service
Prioritization
IPToS
-
The ability to prioritize traffic internally based on the IPToS field in the IP header of
a packet.
TCP/UDP Port
Prioritization
Layer 4
Prioritization
-
The ability to prioritize traffic internally based on the a TCP or UDP port number.
Port-Based Rate
Limiting / metering
Rate Limiting
-
The ability regulate throughput per port
Simple Network
SNMP
Management Protocol
RFC 1157
A set of protocols for managing complex IP networks.
Remote Monitoring
RMON
RFC 1271
A part of SNMP, RMON is a network management protocol that gathers remote
network information.
Dynamic Host
DHCP
Configuration Protocol
RFC 2131
DHCP lets a network administrator supervise and distribute IP addresses from a
central point, and automatically sends a new address when a computer is plugged
into a different place in the network.
Command Line
Interface
CLI
-
Allows users to setup switch configurations by using simple command phrases
through a console / telnet session.
Web-based
Management
Web GUI
-
Allows users to manage the switch through a web browser.
Telnet
Telnet
RFC 854
A terminal emulation program for TCP/IP networks that runs on your computer
and connects your PC to a switches management.
Event log
Event log
-
Logs events such as port link down, configuration changes, etc. in a database.
Simple Network Time
Protocol
SNTP
RFC 2030
Used to synchronize times on IP devices over a network.
TFTP download/upload TFTP
RFC 1350
The ability to load the firmware and configuration files through a TFTP server.
Auto-provisioning
-
Auto-provisioning is a process that enables centralized management for multiple
end user devices. It uses DHCP option 60, 66 and 67 to provide centralized
firmware and configuration management. The feature provides mass firmware
upgrade capability as well as booting-up full end device configuration without any
manual intervention.
-
Select MILAN switches implement this solution to support automated firmware and
configuration control.
Call us at 800-526-9267 or 952-941-7600
< 169 >
stand-alone
media converter
Table of Contents
Select Media Converter
Select Switch
Industrial Test Levels
EMS Type Tests
Test
Description
IEC61000-4-2
ESD
IEC61000-4-3
Radiated RFI
Test Levels
Severity Level
Air Discharge
+/- 8KV
3
Contact Discharge
+/- 6KV
3
ESD Contact Indirect
+/- 6KV
3
Housing
10V/m, 80 MHz – 1 GHz
3
AM 1 KHz, 80% modulation
10V/m, 0.9 – 1.8 GHz
FM 200 Hz, 50% modulation
IEC61000-4-4
IEC61000-4-5
IEC61000-4-6
Burst
(Fast Transient)
Surge
Induced
(Conducted RFI)
PWR Supply Lines
+/- 2KV
3
Communication Lines
+/- 1KV
3
Relay
+/- 1KV
3
PWR Supply Lines
+/- 2KV, 12 ohm, CM
+/- 1KV, 2 ohm, DM
3
Relay
+/- 2KV, 12 ohm, CM
+/- 1KV, 2 ohm, DM
3
PWR Supply Lines
10 Vrms, 150 KHz – 80 MHz
3
AM 1 KHz, 80% modulation
Communication Lines
10 Vrms, 150 KHz – 80 MHz
3
AM 1 KHz, 80% modulation
Relay
10 Vrms, 150 KHz – 80 MHz
3
AM 1 KHz, 80% modulation
Environmental Type Tests
Test
Description
Test Levels
IEC60068-2-6
Vibration
10 – 500 – 10 HZ, 0.5 oct./min, 4g, X, Y, Z (3 axes)
IEC60068-2-27
Shock
50 g, 11ms, 4g, +/- X, +/- Y, +/- Z (6 direction)
IEC60068-2-32
Free Fall
75 cm, 1 corner, 3 edges, 6 faces (total 10 drops)
< 170 >
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
Fiber Specification Table
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
C4TEF1011-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
64
CBFFG1313-100 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
50
C4TEF1011-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
65
CBFFG1313-100 SM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
50
C4TEF1013-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
64
CBFFG1313-110 MM
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
50
C4TEF1013-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
65
CBFFG1313-110 SM
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
50
C4TEF1014-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
64
CBFFG1314-100 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
50
C4TEF1014-110
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
65
CBFFG1314-100 SM
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
50
C4TEF1015-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
64
CBFFG1314-110 MM
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
50
C4TEF1015-110
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
65
CBFFG1314-110 SM
-9.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
12.0 dB
50
C4TEF1016-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
64
CBFFG1315-100 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
50
C4TEF1016-110
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
65
CBFFG1315-100 SM
-5.0 dBm
0.0 dBm
-20.0 dBm
-3.0 dBm
15.0 dB
50
C4TEF1017-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
64
CBFFG1315-110 MM
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
50
C4TEF1017-110
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
65
CBFFG1315-110 SM
-5.0 dBm
0.0 dBm
-24.0 dBm
-3.0 dBm
19.0 dB
50
C4TEF1029-100
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
64
CBFFG1317-100 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
50
C4TEF1029-101
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
64
CBFFG1317-100 SM
-3.0 dBm
-2.0 dBm
-24.0 dBm
-3.0 dBm
21.0 dB
50
C4TEF1029-102
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
64
CBFFG1329-100 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
50
C4TEF1029-103
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
64
CBFFG1329-100 SM
-8.0 dBm
-3.0 dBm
-22.0 dBm
-3.0 dBm
14.0 dB
50
C4TEF1029-110
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
65
CBFFG1329-101 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
50
C4TEF1029-111
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
65
CBFFG1329-101 SM
-8.0 dBm
-3.0 dBm
-22.0 dBm
-3.0 dBm
14.0 dB
50
C4TEF1029-112
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
65
CBFFG1329-110 MM
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
50
C4TEF1029-113
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
65
CBFFG1329-110 SM
-9.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
11.0 dB
50
C4TEF1035-100
0.0 dBm
+5.0 dBm
-36.0 dBm
-3.0 dBm
36.0 dB
64
CBFFG1329-111 MM
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
50
C4TEF1035-110
0.0 dBm
+5.0 dBm
-36.0 dBm
-3.0 dBm
36.0 dB
65
CBFFG1329-111 SM
-9.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
11.0 dB
50
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
50
0.0 dBm
5.0 dBm
-32.0 dBm
CAPTF3311-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
67
CBFFG1335-100 MM
CAPTF3311-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
67
CBFFG1335-100 SM
-9.0 dBm
32.0 dB
50
CAPTF3313-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
67
CBFTF1011-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
43
CAPTF3313-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
67
CBFTF1011-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
44
CAPTF3314-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
67
CBFTF1011-120
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
44
CAPTF3314-110
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
67
CBFTF1011-140
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
44
CAPTF3315-100
-27.0 dBm -10.0 dBm
-34.0 dBm -14.0 dBm
7.0 dB
67
CBFTF1011-155
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
46
CAPTF3315-110
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
67
CBFTF1013-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
43
CAPTF3329-100
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
67
CBFTF1013-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
44
CAPTF3329-101
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
67
CBFTF1013-120
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
44
CAPTF3329-102
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
67
CBFTF1013-140
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
44
CAPTF3329-103
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
67
CBFTF1013-155
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
46
CAPTF3329-110
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
67
CBFTF1014-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
43
CAPTF3329-111
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
67
CBFTF1014-110
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
44
CAPTF3329-112
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
67
CBFTF1014-120
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
44
CAPTF3329-113
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
67
CBFTF1014-140
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
44
CBFFG1013-100
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
49
CBFTF1014-155
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
46
CBFFG1013-110
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
49
CBFTF1015-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
43
CBFFG1014-100
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
49
CBFTF1015-110
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
44
CBFFG1014-110
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
49
CBFTF1015-120
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
44
CBFFG1015-100
-5.0 dBm
0.0 dBm
-20.0 dBm
-3.0 dBm
15.0 dB
49
CBFTF1015-140
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
44
CBFFG1015-110
-5.0 dBm
0.0 dBm
-20.0 dBm
-3.0 dBm
15.0 dB
49
CBFTF1015-155
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
46
CBFFG1017-100
-3.0 dBm
-2.0 dBm
-24.0 dBm
-3.0 dBm
21.0 dB
49
CBFTF1016-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
43
CBFFG1029-100
-8.0 dBm
-3.0 dBm
-22.0 dBm
3.0 dBm
14.0 dB
49
CBFTF1016-110
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
44
CBFFG1029-101
-8.0 dBm
-3.0 dBm
-22.0 dBm
3.0 dBm
14.0 dB
49
CBFTF1016-120
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
44
CBFFG1029-102
-3.0 dBm
2.0 dBm
-23.0 dBm
-3.0 dBm
20.0 dB
49
CBFTF1016-140
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
44
CBFFG1029-103
-3.0 dBm
2.0 dBm
-23.0 dBm
3.0 dBm
20.0 dB
49
CBFTF1017-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
43
CBFFG1029-110
-8.0 dBm
-3.0 dBm
-22.0 dBm
3.0 dBm
14.0 dB
49
CBFTF1017-110
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
44
CBFFG1029-111
-8.0 dBm
-3.0 dBm
-22.0 dBm
3.0 dBm
14.0 dB
49
CBFTF1017-120
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
44
CBFFG1035-100
0.0 dBm
5.0 dBm
-27.0 dBm
-3.0 dBm
27.0 dB
49
CBFTF1017-140
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
44
Call us at 800-526-9267 or 952-941-7600
< 171 >
Table of Contents
Select Media Converter
Select Switch
Fiber Specification Table
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
CBFTF1018-100
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
43
CETTF1013-105
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
33
CBFTF1018-110
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
44
CETTF1013-200
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
33
CBFTF1018-120
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
44
CETTF1014-105
-19.0 dBm -14.0 dBm
-34.0 dBm
-3.0 dBm
15.0 dB
33
CBFTF1018-140
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
44
CETTF1014-200
-27.0 dBm -10.0 dBm
-34.0 dBm -14.0 dBm
7.0 dB
33
CBFTF1018-155
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
46
CETTF1015-105
-18.0 dBm
-7.0 dBm
-32.0 dBm
-7.0 dBm
14.0 dB
33
CBFTF1019-100
-15.2 dBm
-8.0 dBm
-32.5 dBm
-3.0 dBm
17.3 dB
43
CETTF1018-105
-16.0 dBm -10.0 dBm
-29.5 dBm
-7.2 dBm
13.5 dB
33
CBFTF1029-100
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
43
CETTF1022-105
-15.0 dBm
-5.0 dBm
-34.0 dBm -14.0 dBm
19.0 dB
33
CBFTF1029-101
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
43
CETTF1022-200
-15.0 dBm
-5.0 dBm
-34.0 dBm -14.0 dBm
19.0 dB
33
CBFTF1029-102
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
43
CETTF1027-105
-19.0 dBm -15.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
33
CBFTF1029-103
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
43
CETTF1027-200
-19.0 dBm -15.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
33
CBFTF1029-110
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
44
CETTF1029-105
-14.0 dBm
-8.0 dBm
-33.0 dBm
-3.0 dBm
19.0 dB
33
CBFTF1029-111
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
44
CETTF1029-106
-14.0 dBm
-8.0 dBm
-33.0 dBm
-3.0 dBm
19.0 dB
33
CBFTF1029-112
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
44
CFBRM1011-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
40
CBFTF1029-113
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
44
CFBRM1011-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
40
CBFTF1029-120
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
44
CFBRM1013-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
40
CBFTF1029-121
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
44
CFBRM1013-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
40
CBFTF1029-122
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
44
CFBRM1014-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
40
CBFTF1029-123
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
44
CFBRM1014-110
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
40
CBFTF1029-140
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
44
CFBRM1015-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
40
CBFTF1029-141
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
44
CFBRM1016-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
40
CBFTF1029-142
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
44
CFBRM1017-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
40
CBFTF1029-143
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
44
CFBRM1029-100
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
40
CBFTF1029-155
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
46
CFBRM1029-101
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
40
CBFTF1029-156
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
46
CFBRM1029-110
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
40
CBFTF1029-157
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
46
CFBRM1029-111
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
40
CBFTF1029-158
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
46
CFBRM1035-100
0.0 dBm
+5.0 dBm
-36.0 dBm
-3.0 dBm
36.0 dB
40
0.0 dBm
+5.0 dBm
-36.0 dBm
-3.0 dBm
36.0 dB
43
CFBRM1313-100 FEMM -19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
41
-30.0 dBm -14.0 dBm
11.0 dB
43
CFBRM1313-100 GEMM -10.0 dBm
-17.0 dBm
-2.0 dBm
8.5dB
108
CBFTF1035-100
CBFTF1039-100
CCH-MCM12-RJ-70S
-19.0 dBm -14.0 dBm
-7.5 dBm
-2.0 dBm
-16.0 dBm
0.0 dBm
7.0 dB
41
CFBRM1313-110 FEMM -19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
41
-18.0 dBm
0.0 dBm
8.5 dB
41
11.0 dB
41
CCSCF3011-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
58
CFBRM1313-110 GEMM
CCSCF3013-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
58
CFBRM1314-100 MM
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
CCSCF3014-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
58
CFBRM1314-100 SM
-13.0 dBm
-20.0 dBm
CCSCF3015-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
58
CFBRM1314-110 MM
-19.0 dBm -14.0 dBm
CCSCF3016-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
58
CFBRM1314-110 SM
CCSCF3017-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
58
CFBRM1315-100 MM
CCSCF3018-100
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
58
CFBRM1315-100 SM
CCSCF3029-100
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
58
CFBRM1315-110 MM
CCSCF3029-101
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
58
CFBRM1315-110 SM
CCSCF3029-102
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
58
CFBRM1317-100 MM
CCSCF3029-103
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
58
CFBRM1317-100 SM
CEMTF1011-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
66
CFBRM1329-100 MM
CEMTF1013-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
66
CFBRM1329-100 SM
CEMTF1014-100
-15.0 dBm
-31.0 dBm
16.0 dB
66
CFBRM1329-101 MM
-8.0 dBm
-8.0 dBm
CEMTF1015-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
66
CFBRM1329-101 SM
CEMTF1029-100
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
66
CFBRM1329-110 MM
CEMTF1029-101
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
66
CFBRM1329-110 SM
CEMTF1029-102
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
66
CFBRM1329-111 MM
-8.0 dBm
-3.0 dBm
-33.0 dBm
CEMTF1029-103
-3.0 dBm
25.0 dB
66
CFBRM1329-111 SM
CETTF1011-105
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
33
CFBRM1335-100 MM
CETTF1011-200
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
33
CFBRM1335-100 SM
CETTF1012-105
-27.0 dBm -10.0 dBm
-34.0 dBm -14.0 dBm
7.0 dB
33
CFETF1011-105
CETTF1012-200
-27.0 dBm -10.0 dBm
-34.0 dBm -14.0 dBm
7.0 dB
33
CFETF1011-205
< 172 >
-9.5 dBm
-4.0 dBm
-9.0 dBm
-4.0 dBm
-3.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
-5.0 dBm
0.0 dBm
-19.0 dBm -14.0 dBm
-5.0 dBm
0.0 dBm
-19.0 dBm -14.0 dBm
-3.0 dBm
2.0 dBm
-19.0 dBm -14.0 dBm
-8.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
-8.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
-9.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
-9.0 dBm
-3.0 dBm
-3.0 dBm
7.0 dB
41
-30.0 dBm -14.0 dBm
11.0 dB
41
-3.0 dBm
12.0 dB
41
-30.0 dBm -14.0 dBm
-21.0 dBm
11.0 dB
41
-20.0 dBm
-3.0 dBm
15.0 dB
41
-30.0 dBm -14.0 dBm
11.0 dB
41
-24.0 dBm
-3.0 dBm
19.0 dB
41
-30.0 dBm -14.0 dBm
11.0 dB
41
-24.0 dBm
-3.0 dBm
21.0 dB
41
-30.0 dBm -14.0 dBm
11.0 dB
41
-22.0 dBm
-3.0 dBm
14.0 dB
41
-30.0 dBm -14.0 dBm
11.0 dB
41
-3.0 dBm
14.0 dB
41
-30.0 dBm -14.0 dBm
-22.0 dBm
11.0 dB
41
-3.0 dBm
11.0 dB
41
-30.0 dBm -14.0 dBm
-20.0 dBm
11.0 dB
41
-3.0 dBm
11.0 dB
41
-30.0 dBm -14.0 dBm
11.0 dB
41
-32.0 dBm
-9.0 dBm
32.0 dB
41
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
35
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
36
-19.0 dBm -14.0 dBm
0.0 dBm
5.0 dBm
-20.0 dBm
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
Fiber Specification Table
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
CFETF1013-105
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
35
CFMFF1324-280 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
CFETF1013-205
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
36
CFMFF1324-280 MME
-10.0 dBm
-3.0 dBm
-17.0 dBm
-3.0 dBm
7.0 dB
54
CFETF1014-105
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
35
CFMFF1329-200 MM
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
38
CFETF1014-205
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
36
CFMFF1329-200 SM
-13.0 dBm
CFETF1015-105
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
35
CFMFF1329-201 MM
-19.0 dBm -14.0 dBm
CFETF1015-205
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
36
CFMFF1329-201 SM
-13.0 dBm
CFETF1016-105
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
35
CFMFF1329-202 MM
-19.0 dBm -14.0 dBm
CFETF1016-205
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
36
CFMFF1329-202 SM
CFETF1017-105
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
35
CFMFF1329-203 MM
-5.0 dBm
0.0 dBm
-34.0 dBm
CFETF1017-205
-8.0 dBm
-6.0 dBm
-6.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
-7.0 dBm
29.0 dB
36
CFMFF1329-203 SM
CFETF1018-105
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
35
CFMFF1329-210 MM
-19.0 dBm -14.0 dBm
-8.0 dBm
CFETF1018-205
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
36
CFMFF1329-210 SM
-14.0 dBm
CFETF1019-205
-15.2 dBm
-8.0 dBm
-32.5 dBm
-3.0 dBm
17.3 dB
36
CFMFF1329-211 MM
-19.0 dBm -14.0 dBm
CFETF1029-205
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
36
CFMFF1329-211 SM
-14.0 dBm
CFETF1029-206
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
36
CFMFF1329-212 MM
-19.0 dBm -14.0 dBm
CFETF1029-207
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
36
CFMFF1329-212 SM
CFETF1029-208
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
36
CFMFF1329-213 MM
CFETF1029-209
-5.0 dBm
0.0 dBm
-34.0 dBm
-3.0 dBm
29.0 dB
36
CFMFF1329-213 SM
CFETF1029-210
-6.0 dBm
0.0 dBm
-34.0 dBm
-3.0 dBm
28.0 dB
36
CFMFF1329-220 MM
CFETF1029-211
-2.0 dBm
+3.0 dBm
-35.0 dBm
-3.0 dBm
33.0 dB
36
CFMFF1329-220 SM
CFETF1029-212
-3.0 dBm
+2.0 dBm
-35.0 dBm
-3.0 dBm
32.0 dB
36
CFMFF1329-221 MM
-5.0 dBm
-3.0 dBm
-8.0 dBm
-8.0 dBm
0.0 dBm
-19.0 dBm -14.0 dBm
-6.0 dBm
0.0 dBm
-19.0 dBm -14.0 dBm
-8.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
19.0 dB
38
11.0 dB
38
-3.0 dBm
19.0 dB
38
-30.0 dBm -14.0 dBm
-32.0 dBm
11.0 dB
38
-3.0 dBm
25.0 dB
38
-30.0 dBm -14.0 dBm
-33.0 dBm
11.0 dB
38
-33.0 dBm
-3.0 dBm
25.0 dB
38
-26.0 dBm -14.0 dBm
7.0 dB
57
-8.0 dBm
14.0 dB
57
-26.0 dBm -14.0 dBm
-28.0 dBm
7.0 dB
57
-8.0 dBm
14.0 dB
57
-26.0 dBm -14.0 dBm
-28.0 dBm
7.0 dB
57
-8.0 dBm
23.0 dB
57
-26.0 dBm -14.0 dBm
7.0 dB
57
-8.0 dBm
22.0 dB
57
-26.0 dBm -14.0 dBm
7.0 dB
53
-28.0 dBm
-28.0 dBm
-21.0 dBm
-3.0 dBm
13.0 dB
53
-26.0 dBm -14.0 dBm
7.0 dB
53
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
36
CFMFF1329-221 SM
CFMFF1313-200
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
38
CFMFF1329-222 MM
CFMFF1313-220
-10.0 dBm
0.0 dBm
7.0 dB
53
CFMFF1329-222 SM
CFMFF1314-200 MM
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
38
CFMFF1329-223 MM
CFMFF1314-200 SM
-15.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
38
CFMFF1329-223 SM
-3.0 dBm
2.0 dBm
-23.0 dBm
CFMFF1314-210 MM
-19.0 dBm -14.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
57
CFMFF1329-280 MM
-10.0 dBm
-4.0 dBm
CFMFF1314-210 SM
-15.0 dBm
-8.0 dBm
-26.0 dBm -14.0 dBm
11.0 dB
57
CFMFF1329-280 SM
-8.0 dBm
CFMFF1314-220 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
53
CFMFF1329-281 MM
-10.0 dBm
CFMFF1314-220 SM
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
53
CFMFF1329-281 SM
-8.0 dBm
CFMFF1314-280 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
54
CFMFF1329-282 MM
-10.0 dBm
-2.0 dBm
+3.0 dBm
-35.0 dBm
CFMFF1314-280 SM
CFMFF1315-200 MM
-8.0 dBm
-19.0 dBm -14.0 dBm
-17.0 dBm
-3.0 dBm
-3.0 dBm
-30.0 dBm -14.0 dBm
CFETF1039-205
-4.0 dBm
-8.0 dBm
-32.0 dBm
-3.0 dBm
13.0 dB
53
-26.0 dBm -14.0 dBm
7.0 dB
53
-8.0 dBm
20.0 dB
53
-26.0 dBm -14.0 dBm
7.0 dB
53
-8.0 dBm
20.0 dB
53
-17.0 dBm
0.0 dBm
7.0 dB
54
-3.0 dBm
-21.0 dBm
-3.0 dBm
13.0 dB
54
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
54
-3.0 dBm
-21.0 dBm
-3.0 dBm
13.0 dB
54
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
54
54
-19.0 dBm -14.0 dBm
-3.0 dBm
54
2.0 dBm
-19.0 dBm -14.0 dBm
-21.0 dBm
-23.0 dBm
-3.0 dBm
33.0 dB
54
CFMFF1329-282 SM
-3.0 dBm
2.0 dBm
-23.0 dBm
-8.0 dBm
20.0 dB
-30.0 dBm -14.0 dBm
11.0 dB
38
CFMFF1329-283 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
54
-34.0 dBm
26.0 dB
38
CFMFF1329-283 SM
-3.0 dBm
2.0 dBm
-23.0 dBm
-8.0 dBm
20.0 dB
54
0.0 dBm
CFMFF1315-200 SM
-8.0 dBm
-2.0 dBm
CFMFF1315-220 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
53
CFMFF1329-286 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
7.0 dB
54
CFMFF1315-220 SM
-5.0 dBm
0.0 dBm
-20.0 dBm
-3.0 dBm
15.0 dB
53
CFMFF1329-286 SM
-2.0 dBm
+3.0 dBm
-26.0 dBm
-3.0 dBm 24.0 dBm
54
CFMFF1315-280 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
54
CFMFF1329-287 MM
-2.0 dBm
+3.0 dBm
-26.0 dBm
-3.0 dBm
24.0 dB
54
-5.0 dBm
0.0 dBm
-20.0 dBm
54
CFMFF1315-280 SM
CFMFF1316-200 MM
CFMFF1316-200 SM
CFMFF1316-210 MM
CFMFF1316-210 SM
CFMFF1317-200 MM
CFMFF1317-200 SM
CFMFF1317-210 MM
-19.0 dBm -14.0 dBm
-5.0 dBm
0.0 dBm
-19.0 dBm -14.0 dBm
-3.0 dBm
2.0 dBm
-19.0 dBm -14.0 dBm
-5.0 dBm
0.0 dBm
-19.0 dBm -14.0 dBm
-7.0 dBm
-3.0 dBm
15.0 dB
54
CFMFF1329-287 SM
-2.0 dBm
+3.0 dBm
-26.0 dBm
-3.0 dBm
24.0 dB
-30.0 dBm -14.0 dBm
11.0 dB
38
CFMFF1335-220 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
53
-34.0 dBm
-7.0 dBm
29.0 dB
38
CFMFF1335-220 SM
0.0 dBm
5.0 dBm
-27.0 dBm
-3.0 dBm
27.0 dB
53
-31.0 dBm -14.0 dBm
12.0 dB
57
CFMFF1335-280 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
54
-28.0 dBm
-7.0 dBm
25.0 dB
57
CFMFF1335-280 SM
0.0 dBm
5.0 dBm
-27.0 dBm
-3.0 dBm
27.0 dB
54
-30.0 dBm -14.0 dBm
11.0 dB
38
CFMFF1414-200 SM
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
38
-34.0 dBm
-7.0 dBm
29.0 dB
38
CFMFF1414-220 SM
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
53
-26.0 dBm -14.0 dBm
7.0 dB
57
CFMFF1414-280 SM
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
54
CFMFF1317-210 SM
-3.0 dBm
2.0 dBm
-28.0 dBm
-7.0 dBm
25.0 dB
57
CFMFF1415-200 SM
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
38
CFMFF1317-220 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
53
CFMFF1415-200 SM
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
38
53
CFMFF1317-220 SM
-3.0 dBm
2.0 dBm
-23.0 dBm
-3.0 dBm
20.0 dB
53
CFMFF1424-220 MM
-10.0 dBm
-3.0 dBm
-17.0 dBm
-3.0 dBm
7.0 dB
CFMFF1317-280 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
54
CFMFF1424-220 SM
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
53
CFMFF1317-280 SM
-3.0 dBm
+2.0 dBm
-24.0 dBm
-3.0 dBm
21.0 dB
54
CFMFF1429-200 MM
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
38
CFMFF1324-220 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
53
CFMFF1429-200 SM
-13.0 dBm
-6.0 dBm
-32.0 dBm
-6.0 dBm
19.0 dB
38
CFMFF1324-220 MME
-10.0 dBm
-3.0 dBm
-17.0 dBm
-3.0 dBm
7.0 dB
53
CFMFF1429-201 MM
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
38
Call us at 800-526-9267 or 952-941-7600
< 173 >
Table of Contents
Select Media Converter
Select Switch
Fiber Specification Table
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
Product SKU
CFMFF1429-201 SM
-13.0 dBm
-6.0 dBm
-32.0 dBm
CFMFF1429-202 MM
-15.0 dBm
-8.0 dBm
-31.0 dBm
-3.0 dBm
19.0 dB
38
-8.0 dBm
16.0 dB
38
CFMFF1429-202 SM
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
CFMFF1429-203 MM
-15.0 dBm
CFMFF1429-203 SM
-8.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
CFMFF1429-210 MM
-15.0 dBm
-8.0 dBm
-28.0 dBm
CFMFF1429-210 SM
-14.0 dBm
-8.0 dBm
CFMFF1429-211 MM
-15.0 dBm
CFMFF1429-211 SM
-14.0 dBm
CFMFF1429-212 MM
-15.0 dBm
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
CMEFG1029-100
-8.0 dBm
-3.0 dBm
-22.0 dBm
+3.0 dBm
14.0 dB
CMEFG1029-101
-8.0 dBm
-3.0 dBm
-22.0 dBm
-3.0 dBm
14.0 dB
51
38
CMEFG1029-102
-3.0 dBm
+2.0 dBm
-23.0 dBm
-3.0 dBm
20.0 dB
51
16.0 dB
38
CMEFG1029-103
-3.0 dBm
+2.0 dBm
-23.0 dBm
+3.0 dBm
20.0 dB
51
25.0 dB
38
CMEFG1029-110
-9.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
11.0 dB
51
-7.0 dBm
13.0 dB
57
CMEFG1029-111
-9.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
11.0 dB
51
-28.0 dBm
-8.0 dBm
14.0 dB
57
CMEFG1035-100
0.0 dBm
5.0 dBm
-27.0 dBm
-3.0 dBm
27.0 dB
51
-8.0 dBm
-28.0 dBm
-7.0 dBm
13.0 dB
57
CMEFG1039-100
-9.5 dBm
-4.0 dBm
-17.0 dBm
-3.0 dBm
7.5 dB
51
-8.0 dBm
-28.0 dBm
-8.0 dBm
14.0 dB
57
CMEFG1039-110
-9.5 dBm
-4.0 dBm
-17.0 dBm
-3.0 dBm
7.5 dB
51
-8.0 dBm
-28.0 dBm
-7.0 dBm
13.0 dB
57
CPSVT2611-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
59
51
CFMFF1429-212 SM
-5.0 dBm
0.0 dBm
-28.0 dBm
-8.0 dBm
23.0 dB
57
CPSVT2613-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
59
CFMFF1429-213 MM
-15.0 dBm
-8.0 dBm
-28.0 dBm
-7.0 dBm
13.0 dB
57
CPSVT2614-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
59
CFMFF1429-213 SM
-6.0 dBm
0.0 dBm
-28.0 dBm
-8.0 dBm
22.0 dB
57
CPSVT2629-100
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
59
CGETF1013-110
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
52
CPSVT2629-101
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
59
CGETF1014-110
-9.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
12.0 dB
52
CPSVT2629-102
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
59
CGETF1015-110
-5.0 dBm
0.0 dBm
-21.0 dBm
-3.0 dBm
16.0 dB
52
CPSVT2629-103
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
59
CGETF1017-110
-3.0 dBm
2.0 dBm
-24.0 dBm
-3.0 dBm
21.0 dB
52
CRMFE1011-200
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
37
CGETF1024-110
-10.0 dBm
-3.0 dBm
-17.0 dBm
-3.0 dBm
7.0 dB
52
CRMFE1013-200
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
37
CGETF1029-110
-8.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
13.0 dB
52
CRMFE1014-200
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
37
CGETF1029-111
-9.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
13.0 dB
52
CRMFE1015-200
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
37
CGETF1029-112
-3.0 dBm
2.0 dBm
-23.0 dBm
-3.0 dBm
20.0 dB
52
CRMFE1016-200
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
37
CGETF1029-113
-3.0 dBm
2.0 dBm
-23.0 dBm
-3.0 dBm
20.0 dB
52
CRMFE1017-200
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
37
CGETF1035-110
0.0 dBm
5.0 dBm
-27.0 dBm
-9.0 dBm
27.0 dB
52
CRMFE1018-200
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
37
CGETF1039-110
-9.0 dBm
-4.0 dBm
-17.0 dBm
-3.0 dBm
8.0 dB
52
CRMFE1029-200
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
37
CGFEB1013-100
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
47
CRMFE1029-201
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
37
CGFEB1013-110
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
48
CRMFE1029-202
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
37
CGFEB1014-100
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
47
CRMFE1029-203
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
37
CGFEB1014-110
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
48
CRMFE1035-200
0.0 dBm
+5.0 dBm
-36.0 dBm
-3.0 dBm
36.0 dB
37
CGFEB1015-100
-5.0 dBm
0.0 dBm
-20.0 dBm
-3.0 dBm
15.0 dB
47
CRS2F3111-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
60
CGFEB1015-110
-5.0 dBm
0.0 dBm
-20.0 dBm
-3.0 dBm
15.0 dB
48
CRS2F3113-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
60
CGFEB1017-100
-3.0 dBm
2.0 dBm
-23.0 dBm
-3.0 dBm
20.0 dB
47
CRS2F3114-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-7.0 dBm
16.0 dB
60
CGFEB1017-110
-3.0 dBm
2.0 dBm
-23.0 dBm
-3.0 dBm
20.0 dB
48
CRS2F3115-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
60
CGFEB1024-100
-10.0 dBm
-3.0 dBm
-17.0 dBm
-3.0 dBm
7.0 dB
47
CRS4F3111-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
61
CGFEB1024-110
-10.0 dBm
-3.0 dBm
-17.0 dBm
-3.0 dBm
7.0 dB
48
CRS4F3113-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
61
CGFEB1029-100
-8.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
13.0 dB
47
CRS4F3114-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
61
CGFEB1029-101
-8.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
13.0 dB
47
CRS4F3115-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
61
CGFEB1029-102
-3.0 dBm
2.0 dBm
-23.0 dBm
-8.0 dBm
20.0 dB
47
CRS4F3211-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
61
CGFEB1029-103
-3.0 dBm
2.0 dBm
-23.0 dBm
-8.0 dBm
20.0 dB
47
CRS4F3213-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
61
CGFEB1029-104
-2.0 dBm
+3.0 dBm
-26.0 dBm
-3.0 dBm
24.0 dB
47
CRS4F3214-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-7.0 dBm
16.0 dB
61
CGFEB1029-105
-2.0 dBm
+3.0 dBm
-26.0 dBm
-3.0 dBm
24.0 dB
47
CRS4F3215-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
61
CGFEB1029-110
-8.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
13.0 dB
48
CSDTF1011-105
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
62
CGFEB1029-111
-8.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
13.0 dB
48
CSDTF1012-105
-27.0 dBm -10.0 dBm
-34.0 dBm -14.0 dBm
7.0 dB
62
CGFEB1035-100
0.0 dBm
5.0 dBm
-27.0 dBm
-3.0 dBm
27.0 dB
47
CSDTF1013-105
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
62
CMEFG1013-100
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
51
CSDTF1014-105
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
62
CMEFG1013-110
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
51
CSDTF1015-105
-8.0 dBm
-2.0 dBm
-38.0 dBm
-8.0 dBm
30.0 dB
62
CMEFG1014-100
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
51
CSDTF1016-105
-5.0 dBm
0.0 dBm
-38.0 dBm
-7.0 dBm
33.0 dB
62
CMEFG1014-110
-9.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
12.0 dB
51
CSDTF1017-105
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
62
CMEFG1015-100
-5.0 dBm
0.0 dBm
-20.0 dBm
-3.0 dBm
15.0 dB
51
CSDTF1018-105
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
62
CMEFG1015-110
-5.0 dBm
0.0 dBm
-24.0 dBm
-3.0 dBm
19.0 dB
51
CSDTF1022-105
-15.0 dBm
-5.0 dBm
-25.0 dBm -14.0 dBm
10.0 dB
62
CMEFG1017-100
-3.0 dBm
+2.0 dBm
-24.0 dBm
-3.0 dBm
21.0 dB
51
CSDTF1027-105
-19.0 dBm -15.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
62
CMEFG1019-100
-9.5 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
11.5 dB
51
CSDTF1029-105
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
62
CMEFG1019-110
-9.5 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
11.5 dB
51
CSDTF1029-106
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
62
< 174 >
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
Fiber Specification Table
Product SKU
CSDTF1029-107
CSDTF1029-108
CSDTF3011-115
CSDTF3012-115
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
-8.0 dBm
-3.0 dBm
-14.0 dBm -12.0 dBm
-27.0 dBm -10.0 dBm
-33.0 dBm
-3.0 dBm
-25.0 dBm -12.0 dBm
-34.0 dBm -14.0 dBm
Link
Budget Page
Product SKU
25.0 dB
62
E-100BTX-FX-NLP-01(SC) -19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
133
62
E-100BTX-FX-NLP-01(SM) -15.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
133
62
E-TBT-FRL-05
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
74
62
E-TBT-FRL-05(HT)
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
75
-19.0 dBm -15.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
74
25.0 dB
11.0 dB
7.0 dB
Min TX
PWR
Max TX
PWR
-8.0 dBm
RX
Sensitivity
Max In
PWR
Link
Budget Page
CSDTF3013-115
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
62
E-TBT-FRL-05(L)
CSDTF3014-115
-15.0 dBm
-31.0 dBm
16.0 dB
62
E-TBT-FRL-05(LH)
-15.0 dBm
-25.0 dBm -14.0 dBm
10.0 dB
74
-16.0 dBm -10.0 dBm
-29.5 dBm
-7.2 dBm
13.5 dB
74
-8.0 dBm
-8.0 dBm
-5.0 dBm
CSDTF3015-115
-8.0 dBm
-2.0 dBm
-38.0 dBm
-8.0 dBm
30.0 dB
62
E-TBT-FRL-05(MT)
CSDTF3016-115
-5.0 dBm
0.0 dBm
-38.0 dBm
-7.0 dBm
33.0 dB
62
E-TBT-FRL-05(SC)
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
74
CSDTF3017-115
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
62
E-TBT-FRL-05(SCHT)
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
75
-33.5 dBm -14.0 dBm
14.5 dB
62
E-TBT-FRL-05(SM)
-27.0 dBm -10.0 dBm
-34.0 dBm -14.0 dBm
7.0 dB
74
62
E-TBT-FRL-05(SMHT)
-15.0 dBm
-38.0 dBm
-27.0 dBm -10.0 dBm
CSDTF3018-115
CSDTF3022-115
-19.0 dBm -14.0 dBm
-15.0 dBm
-5.0 dBm
-25.0 dBm -14.0 dBm
10.0 dB
-8.0 dBm
-8.0 dBm
23.0 dB
75
-34.0 dBm -14.0 dBm
7.0 dB
74
CSDTF3027-115
-19.0 dBm -15.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
62
E-TBT-FRL-05(XC)
CSDTF3029-115
-13.0 dBm
-32.0 dBm
19.0 dB
62
E-TBT-FRL-05(XCHT)
-18.0 dBm
-7.0 dBm
-32.0 dBm
-7.0x dBm
14.0 dB
75
-5.0 dBm
0.0 dBm
-38.0 dBm
-7.0 dBm
33.0 dB
75
-6.0 dBm
-3.0 dBm
CSDTF3029-116
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
62
E-TBT-FRL-05(XLHT)
CSDTF3029-117
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
62
E-TBT-FRL-N-02(SC)
-16.0 dBm -10.0 dBm
-29.5 dBm
-7.2 dBm
13.5 dB
133
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
133
CSDTF3029-118
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
62
E-TBT-FRL-N-02(ST)
CSEFE1012-100
-15.0 dBm
-8.0 dBm
-32.0 dBm
-5.0 dBm
17.0 dB
34
E-TBT-FRL-NLP-02(SC)
-16.0 dBm -10.0 dBm
-29.5 dBm
-7.2 dBm
13.5 dB
133
CSEFE1014-100
-15.0 dBm
-8.0 dBm
-32.0 dBm
-5.0 dBm
17.0 dB
34
E-TBT-FRL-NLP-02(ST)
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
133
CSEFE1015-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-5.0 dBm
26.0 dB
34
F-SM-MM-02 MM
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
85
CSEFE1022-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-5.0 dBm
26.0 dB
34
F-SM-MM-02 SM
-15.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
85
34
F-SM-MM-02(LH) MM
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
85
34
F-SM-MM-02(LH) SM
-34.0 dBm
-7.0 dBm
26.0 dB
85
-30.0 dBm -14.0 dBm
11.0 dB
85
CSEFE1029-100
CSEFE1029-101
-14.0 dBm
-14.0 dBm
-8.0 dBm
-8.0 dBm
-33.0 dBm
-33.0 dBm
-3.0 dBm
-3.0 dBm
19.0 dB
19.0 dB
CSETF1011-205
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
39
F-SM-MM-02(LW) MM
CSETF1013-205
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
39
F-SM-MM-02(LW) SM
-8.0 dBm
-8.0 dBm
-2.0 dBm
-19.0 dBm -14.0 dBm
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
85
11.0 dB
85
E-100BTX-FX-05
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
81
E-100BTX-FX-05(100)
-13.0 dBm
-32.0 dBm
19.0 dB
81
F-SM-MM-02(XL) SM
-7.0 dBm
29.0 dB
85
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
79
-6.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
F-SM-MM-02(XL) MM
-5.0 dBm
0.0 dBm
-34.0 dBm
E-100BTX-FX-05(101)
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
81
F-SM-MM-05 MM
E-100BTX-FX-05(102)
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
81
F-SM-MM-05 SM
-27.0 dBm -10.0 dBm
-34.0 dBm -14.0 dBm
7.0 dB
79
E-100BTX-FX-05(103)
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
81
F-SM-MM-06 MM
-19.0 dBm -14.0 dBm
-26.0 dBm -14.0 dBm
7.0 dB
111
E-100BTX-FX-05(104)
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
81
F-SM-MM-06 SM
-15.0 dBm
-28.0 dBm
-7.0 dBm
13.0 dB
111
81
F-SM-MM-06(XL) MM
-19.0 dBm -14.0 dBm
-26.0 dBm -14.0 dBm
7.0 dB
111
E-100BTX-FX-05(105)
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
E-100BTX-FX-05(106)
-2.0 dBm
3.0 dBm
-35.0 dBm
-3.0 dBm
33.0 dB
81
F-SM-MM-06(XL) SM
E-100BTX-FX-05(107)
-3.0 dBm
2.0 dBm
-35.0 dBm
-3.0 dBm
32.0 dB
81
J/E-CF-02
-16.0 dBm -10.0 dBm
-29.5 dBm
-7.2 dBm
13.5 dB
77
82
J/E-CF-02(SC)
-16.0 dBm
-32.5 dBm
-8.0 dBm
16.5 dB
77
81
J/E-CF-02(SM)
-27.0 dBm -10.0 dBm
-34.0 dBm -14.0 dBm
7.0 dB
77
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
96
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
96
E-100BTX-FX-05(HT)
E-100BTX-FX-05(LC)
-19.0 dBm -14.0 dBm
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
11.0 dB
-3.0 dBm
-8.0 dBm
2.0 dBm
-29.0 dBm
-7.0 dBm
26.0 dB
111
-9.0 dBm
E-100BTX-FX-05(LH)
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
81
J/E-PSW-FX-02
E-100BTX-FX-05(LHHT)
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
82
J/E-PSW-FX-02(SC)
E-100BTX-FX-05(LW)
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
81
J/E-PSW-FX-02(SM)
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
96
E-100BTX-FX-05(LWHT)
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
82
J/E-PSW-FX-02(100)
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
96
-33.5 dBm -14.0 dBm
14.5 dB
81
J/E-PSW-FX-02(101)
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
96
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
83
83
E-100BTX-FX-05(MT)
-19.0 dBm -14.0 dBm
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
81
J/FE-CF-03
E-100BTX-FX-05(SCHT) -19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
82
J/FE-CF-03(SC)
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
81
J/FE-CF-03(SM)
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
83
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
19.0 dB
83
83
E-100BTX-FX-05(SC)
E-100BTX-FX-05(SM)
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
E-100BTX-FX-05(SMHT) -15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
82
J/FE-CF-03(LH)
E-100BTX-FX-05(SMLC) -15.2 dBm
-8.0 dBm
-32.5 dBm
-3.0 dBm
17.3 dB
81
J/FE-CF-03(100)
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
81
J/FE-CF-03(101)
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
83
9.5 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
10.5 dB
105
E-100BTX-FX-05(XL)
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
E-100BTX-FX-05(XLHT)
-5.0 dBm
0.0 dBm
-38.0 dBm
-8.0 dBm
33.0 dB
82
J/GE-CF-01(LX1)
E-100BTX-FX-05(XLW)
0.0 dBm
+5.0 dBm
-36.0 dBm
-3.0 dBm
36.0 dB
81
J/GE-CF-01(LX2)
-5.0 dBm
0.0 dBm
-20.0 dBm
-3.0 dBm
15.0 dB
105
E-100BTX-FX-N-01
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
133
J/GE-CF-01(LX6)
-3.0 dBm
+2.0 dBm
-24.0 dBm
-3.0 dBm
21.0 dB
105
E-100BTX-FX-N-01(SC)
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
133
J/GE-CF-01(LX101)
-8.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
13.0 dB
105
133
J/GE-CF-01(SX)
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
105
133
J/POE-CF-01
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
98
E-100BTX-FX-N-01(SM) -15.0 dBm
E-100BTX-FX-NLP-01
-8.0 dBm
-19.0 dBm -14.0 dBm
-31.0 dBm
-8.0 dBm
-30.0 dBm -14.0 dBm
Call us at 800-526-9267 or 952-941-7600
16.0 dB
11.0 dB
< 175 >
Table of Contents
Select Media Converter
Select Switch
Fiber Specification Table
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
J/POE-CF-01(SC)
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
98
N-GLX-LC-01(L)
-9.5 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
10.5 dB
141
J/POE-CF-01(SM)
-15.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
98
N-GLX-SC-01
-9.5 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
10.5 dB
141
J/RS232-CF-01
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
115
N-GLX-SC-01(L)
-9.5 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
10.5 dB
141
J/RS232-CF-01(SC)
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
115
N-GSX-LC-01
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
141
J/RS232-TF-01
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
115
N-GSX-LC-01(L)
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
141
J/RS232-TF-01(SC)
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
115
N-GSX-SC-01
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
141
M/E-PSW-FX-01
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
99
N-GSX-SC-01(L)
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
141
M/E-PSW-FX-01(SC)
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
99
ND-FX-MT-01
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
138
M/E-PSW-FX-01(SM)
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
99
ND-FX-SC-01
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
138
M/E-PSW-FX-01(100)
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
99
ND-FX-ST-01
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
138
M/E-PSW-FX-01(101)
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
99
NDM-FTX-MT-01
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
140
MIL-GBIC-SX
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
134
NDM-FTX-MT-01(L)
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
140
MIL-GBIC-LX10
-9.5 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
10.5 dB
134
NDM-FTX-SB201-01
-14.0 dBm
-32.0 dBm
18.0 dB
140
-8.0 dBm
-8.0 dBm
0.0 dBm
MIL-S501SC
-19.0 dBm -14.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
156
NDM-FTX-SB201-01(L)
-14.0 dBm
-8.0 dBm
-32.0 dBm
0.0 dBm
18.0 dB
140
MIL-S501SC-15
-20.0 dBm
0.0 dBm
-32.0 dBm
12.0 dB
156
NDM-FTX-SB202-01
-14.0 dBm
-8.0 dBm
-32.0 dBm
0.0 dBm
18.0 dB
140
MIL-S501SC-30
-15.0 dBm
-8.0 dBm
-34.0 dBm
0.0 dBm
19.0 dB
156
NDM-FTX-SB202-01(L)
-14.0 dBm
-8.0 dBm
-32.0 dBm
0.0 dBm
18.0 dB
140
MIL-S501SC-60
-5.0 dBm
0.0 dBm
-35.0 dBm
0.0 dBm
19.0 dB
156
NDM-FTX-SC-01
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
140
0.0 dBm
MIL-S501ST
-19.0 dBm -14.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
156
NDM-FTX-SC-01(L)
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
140
MIL-S801SC
-19.0 dBm -14.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
156
NDM-FTX-SC5-01
-19.0 dBm -14.0 dBm
-31.0 dBm
-7.5 dBm
12.0 dB
140
MIL-S801SC-60
-15.0 dBm
-34.0 dBm
0.0 dBm
19.0 dB
156
NDM-FTX-SC5-01(L)
-19.0 dBm -14.0 dBm
-31.0 dBm
-7.5 dBm
12.0 dB
140
MIL-S801ST
-19.0 dBm -14.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
156
NDM-FTX-SC20-01
-15.0 dBm
-8.0 dBm
-31.0 dBm
0.0 dBm
16.0 dB
140
-8.0 dBm
-31.0 dBm
-8.0 dBm
MIL-SM801G
-10.0 dBm
0.0 dBm
7.0 dB
145
NDM-FTX-SC20-01(L)
-15.0 dBm
0.0 dBm
16.0 dB
140
MIL-SM801PST
-19.0 dBm -14.0 dBm
-4.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
144
NDM-FTX-ST-01
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
140
MIL-SM801PSC
-19.0 dBm -14.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
144
NDM-FTX-ST-01(L)
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
140
MIL-SM801PSC-15
-20.0 dBm
-32.0 dBm
0.0 dBm
12.0 dB
144
PCM16-FX-LC-01
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
142
MIL-SM808GPST
-19.0 dBm -14.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
146
PCM16-FX-SC-01
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
142
MIL-SM808GPSC
-19.0 dBm -14.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
146
PCM16-FX-SC5-01
-19.0 dBm -14.0 dBm
-31.0 dBm
-7.5 dBm
12.0 dB
142
MIL-SM808GPSC-15
-20.0 dBm
0.0 dBm
-32.0 dBm
0.0 dBm
12.0 dB
146
PCM16-FX-SC20-01
-15.0 dBm
-31.0 dBm
0.0 dBm
16.0 dB
142
MIL-SM808GPSC-60
-5.0 dBm
0.0 dBm
-35.0 dBm
0.0 dBm
19.0 dB
146
PCM16-FX-ST-01
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
142
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
142
142
0.0 dBm
-17.0 dBm
-8.0 dBm
MP/E-PSW-FX-01
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
99
PCM32-FX-LC-01
MP/E-PSW-FX-01(SC)
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
99
PCM32-FX-SC-01
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
MP/E-PSW-FX-01(SM)
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
99
PCM32-FX-SC5-01
-19.0 dBm -14.0 dBm
-31.0 dBm
-7.5 dBm
12.0 dB
142
MU/E-PSW-FX-01(100)
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
99
PCM32-FX-SC20-01
-15.0 dBm
-31.0 dBm
0.0 dBm
16.0 dB
142
MU/E-PSW-FX-01(101)
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
99
PCM32-FX-ST-01
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
142
MU/E-PSW-FX-01
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
99
S4TEF1011-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
119
MU/E-PSW-FX-01(SC)
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
99
S4TEF1011-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
120
MU/E-PSW-FX-01(SM)
-15.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
99
S4TEF1013-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
119
N-FX-LC-02
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
139
S4TEF1013-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
120
N-FX-LC-02(L)
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
139
S4TEF1014-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
119
N-FX-MT-02
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
139
S4TEF1014-110
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
120
N-FX-MT-02(L)
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
139
S4TEF1015-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
119
N-FX-SB201-02
-14.0 dbm
-8.0 dBm
-32.0 dBm
0.0 dBm
18.0 dB
139
S4TEF1015-110
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
120
N-FX-SB202-02
-14.0 dbm
-8.0 dBm
-32.0 dBm
0.0 dBm
18.0 dB
139
S4TEF1016-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
119
N-FX-SC-02
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
139
S4TEF1016-110
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
120
N-FX-SC-02(L)
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
139
S4TEF1017-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
119
N-FX-SC5-02
-19.0 dBm -14.0 dBm
-31.0 dBm
-7.5 dBm
12.0 dB
139
S4TEF1017-110
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
120
N-FX-SC5-02(L)
-19.0 dBm -14.0 dBm
-31.0 dBm
-7.5 dBm
12.0 dB
139
S4TEF1029-100
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
119
N-FX-SC20-02
-15.0 dBm
-8.0 dBm
-31.0 dBm
0.0 dBm
16.0 dB
139
S4TEF1029-101
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
119
N-FX-SC20-02(L)
-15.0 dBm
-8.0 dBm
-31.0 dBm
0.0 dBm
16.0 dB
139
S4TEF1029-102
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
119
N-FX-ST-02
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
139
S4TEF1029-103
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
119
N-FX-ST-02(L)
-19.0 dBm -14.0 dBm
-31.0 dBm -17.0 dBm
12.0 dB
139
S4TEF1029-110
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
120
-20.0 dBm
10.5 dB
141
S4TEF1029-111
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
120
N-GLX-LC-01
< 176 >
-9.5 dBm
-8.0 dBm
-3.0 dBm
-3.0 dBm
-8.0 dBm
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
Fiber Specification Table
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
S4TEF1029-112
-8.0 dBm
-3.0 dBm
-33.0 dBm
S4TEF1029-113
-8.0 dBm
-3.0 dBm
-33.0 dBm
S4TEF1035-100
0.0 dBm
+5.0 dBm
S4TEF1035-110
0.0 dBm
+5.0 dBm
Product SKU
Link
Budget Page
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
-3.0 dBm
25.0 dB
120
-3.0 dBm
25.0 dB
120
-36.0 dBm
-3.0 dBm
36.0 dB
-36.0 dBm
-3.0 dBm
36.0 dB
Link
Budget Page
SBFFG1329-111 SM
-9.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
11.0 dB
102
SBFFG1335-100 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
102
119
SBFFG1335-100 SM
0.0 dBm
5.0 dBm
-32.0 dBm
-9.0 dBm
32.0 dB
102
120
SBFFG3535-100 MM
0.0 dBm
5.0 dBm
-32.0 dBm
-9.0 dBm
32.0 dB
102
0.0 dBm
5.0 dBm
-32.0 dBm
-9.0 dBm
32.0 dB
102
SAPTF3311-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
121
SBFFG3535-100 SM
SAPTF3311-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
121
SBFTF1011-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
93
SAPTF3313-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
121
SBFTF1011-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
94
SAPTF3313-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
121
SBFTF1011-120
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
94
SAPTF3314-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
121
SBFTF1011-140
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
94
SAPTF3314-110
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
121
SBFTF1013-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
93
SAPTF3315-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-8.0 dBm
26.0 dB
121
SBFTF1013-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
94
SAPTF3315-110
-8.0 dBm
-2.0 dBm
-34.0 dBm
-8.0 dBm
26.0 dB
121
SBFTF1013-120
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
94
SAPTF3317-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
121
SBFTF1013-140
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
94
SAPTF3317-110
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
121
SBFTF1014-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
93
SAPTF3329-100
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
121
SBFTF1014-110
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
94
SAPTF3329-101
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
121
SBFTF1014-120
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
94
SAPTF3329-102
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
121
SBFTF1014-140
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
94
SAPTF3329-103
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
121
SBFTF1015-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
93
SAPTF3329-110
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
121
SBFTF1015-110
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
94
SAPTF3329-111
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
121
SBFTF1015-120
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
94
SAPTF3329-112
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
121
SBFTF1015-140
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
94
SAPTF3329-113
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
121
SBFTF1016-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
93
SBFFG1013-100
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
101
SBFTF1016-110
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
94
SBFFG1014-100
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
101
SBFTF1016-120
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
94
SBFFG1015-100
-5.0 dBm
0.0 dBm
-20.0 dBm
-3.0 dBm
15.0 dB
101
SBFTF1016-140
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
94
SBFFG1017-100
-3.0 dBm
-2.0 dBm
-24.0 dBm
-3.0 dBm
21.0 dB
101
SBFTF1017-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
93
SBFFG1029-100
-8.0 dBm
-3.0 dBm
-22.0 dBm
3.0 dBm
14.0 dB
101
SBFTF1017-110
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
94
SBFFG1029-101
-8.0 dBm
-3.0 dBm
-22.0 dBm
3.0 dBm
14.0 dB
101
SBFTF1017-120
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
94
SBFFG1029-102
-3.0 dBm
2.0 dBm
-23.0 dBm
-3.0 dBm
20.0 dB
101
SBFTF1017-140
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
94
SBFFG1029-103
-3.0 dBm
2.0 dBm
-23.0 dBm
3.0 dBm
20.0 dB
101
SBFTF1018-100
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
93
SBFFG1035-100
0.0 dBm
5.0 dBm
-27.0 dBm
-3.0 dBm
27.0 dB
101
SBFTF1018-110
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
94
SBFFG1313-100 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
102
SBFTF1018-120
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
94
SBFFG1313-100 SM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
102
SBFTF1018-140
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
94
SBFFG1313-110 MM
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
102
SBFTF1019-100
-15.2 dBm
-8.0 dBm
-32.5 dBm
-3.0 dBm
17.3 dB
93
SBFFG1313-110 SM
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
102
SBFTF1029-100
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
93
SBFFG1314-100 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
102
SBFTF1029-101
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
93
SBFFG1314-100 SM
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
102
SBFTF1029-102
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
93
SBFFG1314-110 MM
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
102
SBFTF1029-103
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
93
SBFFG1314-110 SM
-9.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
12.0 dB
102
SBFTF1029-104
-5.0 dBm
0.0 dBm
-34.0 dBm
-3.0 dBm
29.0 dB
93
SBFFG1315-100 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
102
SBFTF1029-105
-6.0 dBm
0.0 dBm
-34.0 dBm
-3.0 dBm
28.0 dB
93
SBFFG1315-100 SM
-5.0 dBm
0.0 dBm
-20.0 dBm
-3.0 dBm
15.0 dB
102
SBFTF1029-110
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
94
SBFFG1315-110 MM
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
102
SBFTF1029-111
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
94
SBFFG1315-110 SM
-5.0 dBm
0.0 dBm
-24.0 dBm
-3.0 dBm
19.0 dB
102
SBFTF1029-112
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
94
SBFFG1317-100 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
102
SBFTF1029-113
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
94
SBFFG1317-100 SM
-3.0 dBm
-2.0 dBm
-24.0 dBm
-3.0 dBm
21.0 dB
102
SBFTF1029-120
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
94
SBFFG1329-100 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
102
SBFTF1029-121
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
94
SBFFG1329-100 SM
-8.0 dBm
-3.0 dBm
-22.0 dBm
-3.0 dBm
14.0 dB
102
SBFTF1029-122
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
94
SBFFG1329-101 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
102
SBFTF1029-123
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
94
SBFFG1329-101 SM
-8.0 dBm
-3.0 dBm
-22.0 dBm
-3.0 dBm
14.0 dB
102
SBFTF1029-140
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
94
SBFFG1329-110 MM
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
102
SBFTF1029-141
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
94
SBFFG1329-110 SM
-9.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
11.0 dB
102
SBFTF1029-142
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
94
SBFFG1329-111 MM
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
102
SBFTF1029-143
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
94
Call us at 800-526-9267 or 952-941-7600
< 177 >
Table of Contents
Select Media Converter
Select Switch
Fiber Specification Table
Product SKU
SBFTF1035-100
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
0.0 dBm
+5.0 dBm
-36.0 dBm
Link
Budget Page
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
-3.0 dBm
36.0 dB
93
SFBRM1029-180
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
89
SBFTF1039-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
93
SFBRM1029-181
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
89
SCSCF3011-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
112
SFBRM1029-182
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
89
SCSCF3013-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
112
SFBRM1029-183
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
89
SCSCF3014-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
112
SFBRM1029-190
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
89
SCSCF3015-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
112
SFBRM1029-191
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
89
SCSCF3016-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
112
SFBRM1035-100
0.0 dBm
+5.0 dBm
-36.0 dBm
-3.0 dBm
36.0 dB
88
-5.0 dBm
0.0 dBm
-34.0 dBm
SCSCF3017-100
-7.0 dBm
29.0 dB
112
SFBRM1035-180
0.0 dBm
+5.0 dBm
-36.0 dBm
-3.0 dBm
36.0 dB
89
SCSCF3018-100
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
112
SFBRM1040-180
0.0 dBm
+5.0 dBm
-36.0 dBm
-3.0 dBm
36.0 dB
89
SCSCF3029-100
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
112
SFBRM1313-100 FEMM -19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
90
SCSCF3029-101
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
112
SFBRM1313-100 GEMM -10.0 dBm
-17.0 dBm
SCSCF3029-102
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
112
SFBRM1313-110 FEMM -19.0 dBm -14.0 dBm
-8.0 dBm
-3.0 dBm
-33.0 dBm
SCSCF3029-103
-4.0 dBm
-3.0 dBm
25.0 dB
112
SFBRM1313-110 GEMM
SDSFE3111-100
-19.0 dBm -14.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
129
SFBRM1314-100 MM
-19.0 dBm -14.0 dBm
SDSFE3111-120
-19.0 dBm -14.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
130
SFBRM1314-100 SM
-13.0 dBm
SDSFE3113-100
-19.0 dBm -14.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
129
SFBRM1314-110 MM
-19.0 dBm -14.0 dBm
SDSFE3113-120
-19.0 dBm -14.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
130
SFBRM1314-110 SM
SDSFE3114-100
-15.0 dBm
-3.0 dBm
-30.0 dBm
-3.0 dBm
15.0 dB
129
SFBRM1315-100 MM
SDSFE3114-120
-15.0 dBm
-3.0 dBm
-30.0 dBm
-3.0 dBm
15.0 dB
130
SFBRM1315-100 SM
SDSFE3115-100
-15.0 dBm
-8.0 dBm
-34.0 dBm
-7.0 dBm
19.0 dB
129
SFBRM1315-110 MM
SDSFE3115-120
-15.0 dBm
-8.0 dBm
-34.0 dBm
-7.0 dBm
19.0 dB
130
SFBRM1315-110 SM
SDSFE3117-100
-3.0 dBm
+3.0 dBm
-37.0 dBm
0.0 dBm
34.0 dB
129
SFBRM1317-100 MM
SDSFE3117-120
-3.0 dBm
+3.0 dBm
-37.0 dBm
0.0 dBm
34.0 dB
130
SFBRM1317-100 SM
SDSFE3211-110
-19.0 dBm -14.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
131
SFBRM1329-100 MM
SDSFE3213-110
-19.0 dBm -14.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
131
SFBRM1329-100 SM
SDSFE3214-110
-15.0 dBm
-3.0 dBm
-30.0 dBm
-3.0 dBm
15.0 dB
131
SFBRM1329-101 MM
SDSFE3215-110
-15.0 dBm
-8.0 dBm
-34.0 dBm
-7.0 dBm
19.0 dB
131
SFBRM1329-101 SM
SDSFE3217-110
-3.0 dBm
+3.0 dBm
-37.0 dBm
0.0 dBm
34.0 dB
131
SFBRM1329-102 MM
-9.5 dBm
-9.0 dBm
-4.0 dBm
-3.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
-5.0 dBm
0.0 dBm
-19.0 dBm -14.0 dBm
-5.0 dBm
0.0 dBm
-19.0 dBm -14.0 dBm
-3.0 dBm
2.0 dBm
-19.0 dBm -14.0 dBm
-8.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
-8.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
0.0 dBm
7.0 dB
90
-30.0 dBm -14.0 dBm
11.0 dB
90
0.0 dBm
8.5 dB
90
-30.0 dBm -14.0 dBm
-18.0 dBm
11.0 dB
90
-3.0 dBm
7.0 dB
90
-30.0 dBm -14.0 dBm
-20.0 dBm
11.0 dB
90
-3.0 dBm
12.0 dB
90
-30.0 dBm -14.0 dBm
-21.0 dBm
11.0 dB
90
-20.0 dBm
-3.0 dBm
15.0 dB
90
-30.0 dBm -14.0 dBm
11.0 dB
90
-24.0 dBm
-3.0 dBm
19.0 dB
90
-30.0 dBm -14.0 dBm
11.0 dB
90
-24.0 dBm
-3.0 dBm
21.0 dB
90
-30.0 dBm -14.0 dBm
11.0 dB
90
-3.0 dBm
14.0 dB
90
-30.0 dBm -14.0 dBm
-22.0 dBm
11.0 dB
90
-3.0 dBm
14.0 dB
90
-30.0 dBm -14.0 dBm
-22.0 dBm
11.0 dB
90
-23.0 dBm
90
SEPOE1011-150
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
78
SFBRM1329-102 SM
SEPOE1013-150
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
78
SFBRM1329-103 MM
SFBRM1011-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
88
SFBRM1329-103 SM
SFBRM1011-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
88
SFBRM1329-110 MM
SFBRM1011-180
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
89
SFBRM1329-110 SM
SFBRM1011-190
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
89
SFBRM1329-111 MM
SFBRM1013-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
88
SFBRM1329-111 SM
SFBRM1013-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
88
SFBRM1335-100 MM
SFBRM1013-180
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
89
SFBRM1335-100 SM
-9.0 dBm
32.0 dB
90
SFBRM1013-190
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
89
SFEPE1011-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
86
SFBRM1014-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
88
SFEPE1011-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
86
SFBRM1014-110
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
88
SFEPE1013-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
86
SFBRM1014-180
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
89
SFEPE1013-110
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
86
SFBRM1014-190
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
89
SFEPE1014-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
86
SFBRM1015-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
88
SFEPE1014-110
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
86
SFBRM1015-180
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
89
SFMFF1313-200
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
85
SFBRM1016-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
88
SFMFF1313-220
0.0 dBm
7.5 dB
106
SFBRM1016-180
-5.0 dBm
-0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
89
SFMFF1314-210 MM
-19.0 dBm -14.0 dBm
-31.0 dBm -14.0 dBm
12.0 dB
111
SFBRM1017-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
88
SFMFF1314-210 SM
-15.0 dBm
-8.0 dBm
-26.0 dBm -14.0 dBm
11.0 dB
111
SFBRM1017-180
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
89
SFMFF1314-220 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
106
SFBRM1029-100
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
88
SFMFF1314-220 SM
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
106
SFBRM1029-101
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
88
SFMFF1314-280 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
107
SFBRM1029-110
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
88
SFMFF1314-280 SM
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
107
SFBRM1029-111
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
88
SFMFF1315-220 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
106
< 178 >
-3.0 dBm
+2.0 dBm
-19.0 dBm -14.0 dBm
-3.0 dBm
+2.0 dBm
-19.0 dBm -14.0 dBm
-9.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
-9.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
0.0 dBm
-9.5 dBm
5.0 dBm
-4.0 dBm
-3.0 dBm
20.0 dB
-30.0 dBm -14.0 dBm
11.0 dB
90
-23.0 dBm
+3.0 dBm
20.0 dB
90
-30.0 dBm -14.0 dBm
11.0 dB
90
-20.0 dBm
-3.0 dBm
11.0 dB
90
-30.0 dBm -14.0 dBm
11.0 dB
90
-3.0 dBm
11.0 dB
90
-30.0 dBm -14.0 dBm
-20.0 dBm
11.0 dB
90
-32.0 dBm
-17.0 dBm
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
Fiber Specification Table
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
SFMFF1315-220 SM
-5.0 dBm
0.0 dBm
-20.0 dBm
-3.0 dBm
15.0 dB
106
SFMFF1335-220 SM
0.0 dBm
5.0 dBm
-27.0 dBm
-3.0 dBm
27.0 dB
SFMFF1315-280 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
107
SFMFF1335-280 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
107
SFMFF1315-280 SM
-5.0 dBm
0.0 dBm
-20.0 dBm
-3.0 dBm
15.0 dB
107
SFMFF1335-280 SM
0.0 dBm
5.0 dBm
-27.0 dBm
-3.0 dBm
27.0 dB
107
7.0 dB
111
SFMFF1414-220 SM
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
106
25.0 dB
111
SFMFF1414-280
-13.0 dbm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
107
85
SFMFF1316-210 MM
SFMFF1316-210 SM
SFMFF1317-210 MM
-19.0 dBm -14.0 dBm
-3.0 dBm
2.0 dBm
-19.0 dBm -14.0 dBm
-26.0 dBm -14.0 dBm
-28.0 dBm
-7.0 dBm
-26.0 dBm -14.0 dBm
106
7.0 dB
111
SFMFF1415-200 SM
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
SFMFF1317-210 SM
-3.0 dBm
2.0 dBm
-28.0 dBm
-7.0 dBm
25.0 dB
111
SFMFF1415-200 SMLH
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
85
SFMFF1317-220 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
106
SFMFF1417-200 MM
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
85
SFMFF1317-220 SM
-3.0 dBm
2.0 dBm
-23.0 dBm
-3.0 dBm
20.0 dB
106
SFMFF1417-200 SM
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
85
SFMFF1317-280 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
107
SFMFF1424-220 MME
-10.0 dBm
-3.0 dBm
-17.0 dBm
-3.0 dBm
7.0 dB
106
SFMFF1317-280 SM
-3.0 dBm
+2.0 dBm
-24.0 dBm
-3.0 dBm
21.0 dB
107
SFMFF1424-220 SM
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
106
SFMFF1324-220 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
106
SFMFF1429-200 MM
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
85
SFMFF1324-220 MME
-10.0 dBm
-3.0 dBm
-17.0 dBm
-3.0 dBm
7.0 dB
106
SFMFF1429-200 SM
-13.0 dBm
-6.0 dBm
-32.0 dBm
-6.0 dBm
19.0 dB
85
SFMFF1324-280 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
107
SFMFF1429-201 MM
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
85
SFMFF1324-280 MME
-10.0 dBm
-3.0 dBm
-17.0 dBm
-3.0 dBm
7.0 dB
107
SFMFF1429-201 SM
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
85
SFMFF1329-200 MM
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
85
SFMFF1429-202 MM
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
85
SFMFF1329-200 SM
-13.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
85
SFMFF1429-202 SM
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
85
SFMFF1329-201 MM
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
85
SFMFF1429-203 MM
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
85
SFMFF1329-201 SM
-13.0 dBm
SFMFF1329-202 MM
-19.0 dBm -14.0 dBm
SFMFF1329-202 SM
SFMFF1329-203 MM
SFMFF1329-203 SM
SFMFF1329-204 MM
SFMFF1329-204 SM
SFMFF1329-205 MM
SFMFF1329-205 SM
-8.0 dBm
-6.0 dBm
-6.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
-8.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
-5.0 dBm
0.0 dBm
-19.0 dBm -14.0 dBm
-6.0 dBm
0.0 dBm
-3.0 dBm
19.0 dB
85
SFMFF1429-203 SM
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
85
-30.0 dBm -14.0 dBm
-32.0 dBm
11.0 dB
85
SGETF1013-110
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
104
-3.0 dBm
25.0 dB
85
SGETF1014-110
-9.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
12.0 dB
104
-30.0 dBm -14.0 dBm
-33.0 dBm
11.0 dB
85
SGETF1015-110
-5.0 dBm
0.0 dBm
-21.0 dBm
-3.0 dBm
16.0 dB
104
104
-3.0 dBm
25.0 dB
85
SGETF1017-110
-3.0 dBm
2.0 dBm
-24.0 dBm
-3.0 dBm
21.0 dB
-30.0 dBm -14.0 dBm
-33.0 dBm
11.0 dB
85
SGETF1024-110
-10.0 dBm
-3.0 dBm
-17.0 dBm
-3.0 dBm
7.0 dB
104
-34.0 dBm
-3.0 dBm
29.0 dB
85
SGETF1029-110
-8.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
13.0 dB
104
-30.0 dBm -14.0 dBm
11.0 dB
85
SGETF1029-111
-9.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
12.0 dB
104
-34.0 dBm
28.0 dB
85
SGETF1029-112
-3.0 dBm
2.0 dBm
-23.0 dBm
-3.0 dBm
20.0 dB
104
-3.0 dBm
SFMFF1329-210 MM
-19.0 dBm -14.0 dBm
-26.0 dBm -14.0 dBm
SFMFF1329-210 SM
-14.0 dBm
-28.0 dBm
SFMFF1329-211 MM
-19.0 dBm -14.0 dBm
SFMFF1329-211 SM
-14.0 dBm
SFMFF1329-220 MM
-19.0 dBm -14.0 dBm
SFMFF1329-220 SM
SFMFF1329-221 MM
SFMFF1329-221 SM
SFMFF1329-222 MM
SFMFF1329-222 SM
SFMFF1329-223 MM
-8.0 dBm
-8.0 dBm
-8.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
-8.0 dBm
-3.0 dBm
-19.0 dBm -14.0 dBm
-3.0 dBm
2.0 dBm
-19.0 dBm -14.0 dBm
7.0 dB
111
SGETF1029-113
-3.0 dBm
2.0 dBm
-23.0 dBm
-3.0 dBm
20.0 dB
104
-8.0 dBm
14.0 dB
111
SGETF1029-116
-2.0 dBm
3.0 dBm
-26.0 dBm
-3.0 dBm
24.0 dB
104
-26.0 dBm -14.0 dBm
7.0 dB
111
SGETF1029-117
-2.0 dBm
3.0 dBm
-26.0 dBm
-3.0 dBm
24.0 dB
104
104
-8.0 dBm
14.0 dB
111
SGETF1035-110
0.0 dBm
5.0 dBm
-27.0 dBm
-9.0 dBm
27.0 dB
-26.0 dBm -14.0 dBm
-28.0 dBm
7.0 dB
106
SGETF1039-110
-9.0 dBm
-4.0 dBm
-17.0 dBm
-3.0 dBm
8.0 dB
104
13.0 dB
106
SGFEB1013-100
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
100
7.0 dB
106
SGFEB1014-100
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
100
13.0 dB
106
SGFEB1015-100
-5.0 dBm
0.0 dBm
-20.0 dBm
-3.0 dBm
15.0 dB
100
-21.0 dBm
-3.0 dBm
-26.0 dBm -14.0 dBm
-21.0 dBm
-3.0 dBm
-26.0 dBm -14.0 dBm
7.0 dB
106
SGFEB1017-100
-3.0 dBm
2.0 dBm
-23.0 dBm
-3.0 dBm
20.0 dB
100
-8.0 dBm
20.0 dB
106
SGFEB1024-100
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
100
-26.0 dBm -14.0 dBm
7.0 dB
106
SGFEB1029-100
-8.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
13.0 dB
100
-23.0 dBm
SFMFF1329-223 SM
-3.0 dBm
2.0 dBm
-23.0 dBm
-8.0 dBm
20.0 dB
106
SGFEB1029-101
-8.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
13.0 dB
100
SFMFF1329-280 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
107
SGFEB1029-102
-3.0 dBm
2.0 dBm
-23.0 dBm
-8.0 dBm
20.0 dB
100
SFMFF1329-280 SM
-8.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
13.0 dB
107
SGFEB1029-103
-3.0 dBm
2.0 dBm
-23.0 dBm
-8.0 dBm
20.0 dB
100
SFMFF1329-281 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
107
SGFEB1035-100
0.0 dBm
5.0 dBm
-27.0 dBm
-3.0 dBm
27.0 dB
100
SFMFF1329-281 SM
-8.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
13.0 dB
107
SIBTF1011-110-MS
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
128
SFMFF1329-282 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
107
SIBTF1011-110-MR
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
128
SFMFF1329-282 SM
-3.0 dBm
2.0 dBm
-23.0 dBm
-8.0 dBm
20.0 dB
107
SIBTF1011-130-MS
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
128
SFMFF1329-283 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
107
SIBTF1011-130-MR
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
128
SFMFF1329-283 SM
-3.0 dBm
2.0 dBm
-23.0 dBm
-8.0 dBm
20.0 dB
107
SIBTF1011-140-MS
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
128
SFMFF1329-286 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
107
SIBTF1011-140-MR
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
128
SFMFF1329-286 SM
-2.0 dBm
+3.0 dBm
-26.0 dBm
-3.0 dBm
24.0 dB
107
SIBTF1013-110-MS
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
128
SFMFF1329-287 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
107
SIBTF1013-110-MR
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
128
SFMFF1329-287 SM
-2.0 dBm
+3.0 dBm
-26.0 dBm
-3.0 dBm
24.0 db
107
SIBTF1013-130-MS
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
128
SFMFF1335-220 MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
106
SIBTF1013-130-MR
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
128
Call us at 800-526-9267 or 952-941-7600
< 179 >
Table of Contents
Select Media Converter
Select Switch
Fiber Specification Table
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
SIBTF1013-140-MS
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
128
SPSVT2629-102
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
113
SIBTF1013-140-MR
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
128
SPSVT2629-103
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
113
SIBTF1014-110-MS
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
128
SRMFE1011-200
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
84
SIBTF1014-110-MR
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
128
SRMFE1013-200
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
84
SIBTF1014-130-MS
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
128
SRMFE1014-200
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
84
SIBTF1014-130-MR
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
128
SRMFE1015-200
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
84
SIBTF1014-140-MS
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
128
SRMFE1016-200
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
84
SIBTF1014-140-MR
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
128
SRMFE1017-200
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
84
SISTF1011-111-LR
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
124
SRMFE1018-200
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
84
SISTF1011-111-LRT
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
124
SRMFE1029-200
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
84
SISTF1011-141-LR
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
125
SRMFE1029-201
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
84
SISTF1011-141-LRT
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
125
SRMFE1029-202
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
84
SISTF1013-111-LR
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
124
SRMFE1029-203
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
84
SISTF1013-111-LRT
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
124
SRS2F3111-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
114
SISTF1013-141-LR
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
125
SRS2F3113-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
114
SISTF1013-141-LRT
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
125
SRS2F3114-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
114
SISTF1014-111-LR
-15.0 dBm
-8.0 dBm
-32.0 dBm
-5.0 dBm
17.0 dB
124
SRS2F3115-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
114
SISTF1014-111-LRT
-15.0 dBm
-8.0 dBm
-32.0 dBm
-5.0 dBm
17.0 dB
124
SRS4F3111-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
116
SISTF1014-141-LR
-15.0 dBm
-8.0 dBm
-32.0 dBm
-5.0 dBm
17.0 dB
125
SRS4F3113-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
116
SISTF1014-141-LRT
-15.0 dBm
-8.0 dBm
-32.0 dBm
-5.0 dBm
17.0 dB
125
SRS4F3114-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-7.0 dBm
16.0 dB
116
SMEFG1013-100
-10.0 dBm
-4.0 dBm
-17.0 dBm
0.0 dBm
7.0 dB
103
SRS4F3115-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
116
SMEFG1013-110
-9.5 dBm
-4.0 dBm
-18.0 dBm
0.0 dBm
8.5 dB
103
SRS4F3211-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
116
SMEFG1014-100
-13.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
7.0 dB
103
SRS4F3213-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
116
SMEFG1014-110
-9.0 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
12.0 dB
103
SRS4F3214-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-7.0 dBm
16.0 dB
116
SMEFG1015-100
-5.0 dBm
0.0 dBm
-20.0 dBm
-3.0 dBm
15.0 dB
103
SRS4F3215-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
116
SMEFG1015-110
-5.0 dBm
0.0 dBm
-24.0 dBm
-3.0 dBm
19.0 dB
103
SSDTF1011-105
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
117
SMEFG1017-100
-3.0 dBm
+2.0 dBm
-24.0 dBm
-3.0 dBm
21.0 dB
103
SSDTF1012-105
-27.0 dBm -10.0 dBm
-34.0 dBm -14.0 dBm
7.0 dB
117
SMEFG1019-100
-9.5 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
11.5 dB
103
SSDTF1013-105
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
117
SMEFG1019-110
-9.5 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
11.5 dB
103
SSDTF1014-105
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
117
SMEFG1029-100
-8.0 dBm
-3.0 dBm
-22.0 dBm
+3.0 dBm
14.0 dB
103
SSDTF1015-105
-8.0 dBm
-2.0 dBm
-38.0 dBm
-8.0 dBm
30.0 dB
117
SMEFG1029-101
-8.0 dBm
-3.0 dBm
-22.0 dBm
+3.0 dBm
14.0 dB
103
SSDTF1016-105
-5.0 dBm
0.0 dBm
-38.0 dBm
-7.0 dBm
33.0 dB
117
SMEFG1029-102
-3.0 dBm
+2.0 dBm
-23.0 dBm
-3.0 dBm
20.0 dB
103
SSDTF1017-105
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
117
SMEFG1029-103
-3.0 dBm
+2.0 dBm
-23.0 dBm
+3.0 dBm
20.0 dB
103
SSDTF1018-105
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
117
SMEFG1029-110
-9.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
11.0 dB
103
SSDTF1022-105
-15.0 dBm
-5.0 dBm
-25.0 dBm -14.0 dBm
10.0 dB
117
SMEFG1029-111
-9.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
11.0 dB
103
SSDTF1027-105
-19.0 dBm -15.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
117
SMEFG1035-100
0.0 dBm
5.0 dBm
-27.0 dBm
-3.0 dBm
27.0 dB
103
SSDTF1029-105
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
117
SMEFG1039-100
-9.5 dBm
-4.0 dBm
-17.0 dBm
-3.0 dBm
7.5 dB
103
SSDTF1029-106
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
117
SMEFG1039-110
-9.5 dBm
-4.0 dBm
-17.0 dBm
-3.0 dBm
7.5 dB
103
SSDTF1029-107
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
117
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
117
11.0 dB
117
SPOEB1011-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
97
SSDTF1029-108
SPOEB1013-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
97
SSDTF3011-115
-14.0 dBm -12.0 dBm
-25.0 dBm -12.0 dBm
SPOEB1014-100
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
97
SSDTF3012-115
-27.0 dBm -10.0 dBm
-34.0 dBm -14.0 dBm
7.0 dB
117
SPOEB1015-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
97
SSDTF3013-115
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
117
SPOEB1016-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
97
SSDTF3014-115
-15.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
16.0 dB
117
SPOEB1017-100
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
97
SSDTF3015-115
-8.0 dBm
-2.0 dBm
-38.0 dBm
-8.0 dBm
30.0 dB
117
SPOEB1029-100
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
97
SSDTF3016-115
-5.0 dBm
0.0 dBm
-38.0 dBm
-7.0 dBm
33.0 dB
117
SPOEB1029-101
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
97
SSDTF3017-115
-5.0 dBm
0.0 dBm
-34.0 dBm
-7.0 dBm
29.0 dB
117
SPOEB1035-100
0.0 dBm
+5.0 dBm
-36.0 dBm
-3.0 dBm
36.0 dB
97
SSDTF3018-115
-19.0 dBm -14.0 dBm
-33.5 dBm -14.0 dBm
14.5 dB
117
SPSVT2611-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
113
SSDTF3022-115
-15.0 dBm
-5.0 dBm
-25.0 dBm -14.0 dBm
10.0 dB
117
SPSVT2613-100
-19.0 dBm -14.0 dBm
-30.0 dBm -14.0 dBm
11.0 dB
113
SSDTF3027-115
-19.0 dBm -15.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
117
SPSVT2614-100
-15.0 dBm
-31.0 dBm
16.0 dB
113
SSDTF3029-115
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
117
-8.0 dBm
-8.0 dBm
SPSVT2615-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-7.0 dBm
26.0 dB
113
SSDTF3029-116
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
117
SPSVT2629-100
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
113
SSDTF3029-117
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
117
SPSVT2629-101
-13.0 dBm
-6.0 dBm
-32.0 dBm
-3.0 dBm
19.0 dB
113
SSDTF3029-118
-8.0 dBm
-3.0 dBm
-33.0 dBm
-3.0 dBm
25.0 dB
117
< 180 >
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
Fiber Specification Table
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
Product SKU
SSEFE1012-100
-15.0 dBm
-8.0 dBm
-32.0 dBm
SSEFE1014-100
-15.0 dBm
-8.0 dBm
-32.0 dBm
-5.0 dBm
17.0 dB
80
-5.0 dBm
17.0 dB
80
SSEFE1015-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-5.0 dBm
26.0 dB
SSEFE1022-100
-8.0 dBm
-2.0 dBm
-34.0 dBm
-5.0 dBm
SSEFE1029-100
-14.0 dBm
-8.0 dBm
-33.0 dBm
SSEFE1029-101
-14.0 dBm
-8.0 dBm
-33.0 dBm
SSETF1011-205
SSETF1013-205
Product SKU
Min TX
PWR
Max TX
PWR
RX
Sensitivity
Max In
PWR
Link
Budget Page
TN-SFP-OC12S-C39
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-OC12S-C41
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
80
TN-SFP-OC12S-C43
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
26.0 dB
80
TN-SFP-OC12S-C45
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
-3.0 dBm
19.0 dB
80
TN-SFP-OC12S-C47
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
-3.0 dBm
19.0 dB
80
TN-SFP-OC12S-C49
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
87
TN-SFP-OC12S-C51
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
-19.0 dBm -14.0 dBm
-32.5 dBm -14.0 dBm
13.5 dB
87
TN-SFP-OC12S-C53
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
TN-GB-MM5
-9.5 dBm
-4.0 dBm
-18.0 dBm
-3. dBm
8.5 dB
134
TN-SFP-OC12S-C55
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
TN-GB-SM5
-9.0 dBm
-3.0 dBm
-20.0 dBm
-3.0 dBm
11.0 dB
134
TN-SFP-OC12S-C57
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
TN-GB-SM512
0.0 dBm
+5.0 dBm
-32.0 dBm
-9.0 dBm
32.0 dB
134
TN-SFP-OC12S-C59
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
TN-GB-SM53
-5.0 dBm
0.0 dBm
-24.0 dBm
-3.0 dBm
19.0 dB
134
TN-SFP-OC12S-C61
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
TN-GB-SM55
-5.0 dBm
0.0 dBm
-24.0 dBm
-3.0 dBm
19.0 dB
134
TN-SFP-OC3M
-19.0 dBm -12.0 dBm
-30.0 dBm
-8.0 dBm
11.0 dB
135
TN-GB-SM58
0.0 dBm
+5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
134
TN-SFP-OC3S
-14.0 dBm
-8.0 dBm
-31.0 dBm
-8.0 dBm
17.0 dB
135
TN-SFP-ELX1
-9.5 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
11.5 dB
135
TN-SFP-OC3S8-C27
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-ESX5
-10.0 dBm
-3.0 dBm
-18.0 dBm
-3.0 dBm
8.0 dB
135
TN-SFP-OC3S8-C29
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-ESX6
-10.0 dBm
-3.0 dBm
-18.0 dBm
-3.0 dBm
8.0 dB
135
TN-SFP-OC3S8-C31
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-FC2XM
-9.0 dBm
-4.0 dBm
-15.0 dBm
-3.0 dBm
6.0 dB
135
TN-SFP-OC3S8-C33
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-FC2XS15
-5.0 dBm
0.0 dBm
-18.0 dBm
0.0 dBm
13.0 dB
135
TN-SFP-OC3S8-C35
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-FC2XS2
-9.5 dBm
-3.0 dBm
-18.0 dBm
-3.0 dBm
8.5 dB
135
TN-SFP-OC3S8-C37
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-FC2XS40
-2.0 dBm
+3.0 dBm
-28.0 dBm
-9.0 dBm
26.0 dB
135
TN-SFP-OC3S8-C39
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-LX1
-9.5 dBm
-3.0 dBm
-21.0 dBm
-3.0 dBm
11.5 dB
135
TN-SFP-OC3S8-C41
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-LX12
0.0 dBm
+5.0 dBm
-32.0 dBm
-9.0 dBm
32.0 dB
135
TN-SFP-OC3S8-C43
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-LX3
-5.0 dBm
0.0 dBm
-24.0 dBm
-3.0 dBm
19.0 dB
135
TN-SFP-OC3S8-C45
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-LX5
-5.0 dBm
0.0 dBm
-24.0 dBm
-3.0 dBm
19.0 dB
135
TN-SFP-OC3S8-C47
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-LX8
0.0 dBm
+5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
135
TN-SFP-OC3S8-C49
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-LX8-C27
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC3S8-C51
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-LX8-C29
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC3S8-C53
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-LX8-C31
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC3S8-C55
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-LX8-C33
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC3S8-C57
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-LX8-C35
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC3S8-C59
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-LX8-C37
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC3S8-C61
-5.0 dBm
-0.0 dBm
-34.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-LX8-C39
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC48S-C27
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-LX8-C41
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC48S-C29
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-LX8-C43
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC48S-C31
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-LX8-C45
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC48S-C33
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-LX8-C47
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC48S-C35
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-LX8-C49
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC48S-C37
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-LX8-C51
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC48S-C39
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-LX8-C53
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC48S-C41
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-LX8-C55
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC48S-C43
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-LX8-C57
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC48S-C45
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-LX8-C59
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC48S-C47
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-LX8-C61
0.0 dBm
5.0 dBm
-24.0 dBm
-3.0 dBm
24.0 dB
136
TN-SFP-OC48S-C49
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
+1.0 dBm
+5.0 dBm
-36.0 dBm -10.0 dBm
37.0 dB
135
TN-SFP-OC48S-C51
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-LX16
TN-SFP-OC12M
-19.0 dBm -12.0 dBm
-26.0 dBm
-8.0 dBm
7.0 dB
135
TN-SFP-OC48S-C53
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-OC12S
-14.0 dBm
-8.0 dBm
-28.0 dBm
-5.0 dBm
14.0 dB
135
TN-SFP-OC48S-C55
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-OC12S-C27
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-OC48S-C57
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-OC12S-C29
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-OC48S-C59
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-OC12S-C31
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-OC48S-C61
-2.0 dBm
3.0 dBm
-20.0 dBm
0.0 dBm
18.0 dB
136
TN-SFP-OC12S-C33
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-SX
-9.0 dBm
-4.0 dBm
-17.0 dBm
-3.0 dBm
8.0 dB
135
TN-SFP-OC12S-C35
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
TN-SFP-SXD
-9.0 dBm
-4.0 dBm
-17.0 dBm
-3.0 dBm
8.0 dB
135
TN-SFP-OC12S-C37
0.0 dBm
5.0 dBm
-29.0 dBm
-8.0 dBm
29.0 dB
136
Call us at 800-526-9267 or 952-941-7600
< 181 >
Table of Contents
Select Media Converter
Select Switch
Product Number Index
Product Number
Page
Product Number
Page
Product Number
Page
Product Number
Page
1000MCC-1 . . . . . . . . . . . . . . . . . . . . . . . 55
CAPTF3329-112 . . . . . . . . . . . . . . . . . . . 67
CBFTF1016-110 . . . . . . . . . . . . . . . . . . . 44
CEMTF1029-100 . . . . . . . . . . . . . . . . . . . 66
21DCE-3 . . . . . . . . . . . . . . . . . . . . 59 & 113
CAPTF3329-113 . . . . . . . . . . . . . . . . . . . 67
CBFTF1016-120 . . . . . . . . . . . . . . . . . . . 44
CEMTF1029-101 . . . . . . . . . . . . . . . . 66
21DTE-3 . . . . . . . . . . . . . . . . . . . . 59 & 113
CBFFG1013-100 . . . . . . . . . . . . . . . . . . . 49
CBFTF1016-140 . . . . . . . . . . . . . . . . . . . 44
CEMTF1029-102 . . . . . . . . . . . . . . . . 66
232DCE-3 . . . . . . . . . . . . . . . . . . . 59 & 113
CBFFG1013-110 . . . . . . . . . . . . . . . . . . . 49
CBFTF1017-100 . . . . . . . . . . . . . . . . . . . 43
CEMTF1029-103 . . . . . . . . . . . . . . . . 66
232DTE-3 . . . . . . . . . . . . . . . . . . . 59 & 113
CBFFG1014-100 . . . . . . . . . . . . . . . . . . . 49
CBFTF1017-110 . . . . . . . . . . . . . . . . . . . 44
CETTF1011-105. . . . . . . . . . . . . . . . . . . . 33
35DCE-3 . . . . . . . . . . . . . . . . . . . . 59 & 113
CBFFG1014-110 . . . . . . . . . . . . . . . . . . . 49
CBFTF1017-120 . . . . . . . . . . . . . . . . . . . 44
CETTF1011-200 . . . . . . . . . . . . . . . . . 33
35DTE-3 . . . . . . . . . . . . . . . . . . . . 59 & 113
CBFFG1015-100 . . . . . . . . . . . . . . . . . . . 49
CBFTF1017-140 . . . . . . . . . . . . . . . . . . . 44
CETTF1012-105. . . . . . . . . . . . . . . . . . . . 33
449DCE-3 . . . . . . . . . . . . . . . . . . . 59 & 113
CBFFG1015-110 . . . . . . . . . . . . . . . . . . . 49
CBFTF1018-100 . . . . . . . . . . . . . . . . . . . 43
CETTF1012-200. . . . . . . . . . . . . . . . . . . . 33
449DTE-3 . . . . . . . . . . . . . . . . . . . 59 & 113
CBFFG1017-100 . . . . . . . . . . . . . . . . . . . 49
CBFTF1018-110 . . . . . . . . . . . . . . . . . . . 44
CETTF1013-105. . . . . . . . . . . . . . . . . . . . 33
530DCE-3 . . . . . . . . . . . . . . . . . . . 59 & 113
CBFFG1029-100 . . . . . . . . . . . . . . . . . . . 49
CBFTF1018-120 . . . . . . . . . . . . . . . . . . . 44
CETTF1013-200. . . . . . . . . . . . . . . . . . . . 33
530DTE-3 . . . . . . . . . . . . . . . . . . . 59 & 113
CBFFG1029-101 . . . . . . . . . . . . . . . . . . . 49
CBFTF1018-140 . . . . . . . . . . . . . . . . . . . 44
CETTF1014-105. . . . . . . . . . . . . . . . . . . . 33
BTR-NDM-PXE . . . . . . . . . . . . . . . . . . . 140
CBFFG1029-102 . . . . . . . . . . . . . . . . . . . 49
CBFTF1018-155 . . . . . . . . . . . . . . . . . . . 46
CETTF1014-200. . . . . . . . . . . . . . . . . . . . 33
BTR-NDM-RPL . . . . . . . . . . . . . . . . . . . 140
CBFFG1029-103 . . . . . . . . . . . . . . . . . . . 49
CBFTF1019-100 . . . . . . . . . . . . . . . . . . . 43
CETTF1015-105. . . . . . . . . . . . . . . . . . . . 33
BTR-NFX . . . . . . . . . . . . . . . . . . . . . . . . 139
CBFFG1029-110 . . . . . . . . . . . . . . . . . . . 49
CBFTF1029-100 . . . . . . . . . . . . . . . . . . . 43
CETTF1018-105. . . . . . . . . . . . . . . . . . . . 33
BTR-NGX-PXE . . . . . . . . . . . . . . . . . . . . 141
CBFFG1029-111 . . . . . . . . . . . . . . . . . . . 49
CBFTF1029-101 . . . . . . . . . . . . . . . . . . . 43
CETTF1022-105. . . . . . . . . . . . . . . . . . . . 33
C4TEF1011-100. . . . . . . . . . . . . . . . . . . . 64
CBFFG1035-100 . . . . . . . . . . . . . . . . . . . 49
CBFTF1029-102 . . . . . . . . . . . . . . . . . . . 43
CETTF1022-200. . . . . . . . . . . . . . . . . . . . 33
C4TEF1011-110. . . . . . . . . . . . . . . . . . . . 65
CBFFG1313-100 . . . . . . . . . . . . . . . . . . . 50
CBFTF1029-103 . . . . . . . . . . . . . . . . . . . 43
CETTF1027-105. . . . . . . . . . . . . . . . . . . . 33
C4TEF1013-100. . . . . . . . . . . . . . . . . . . . 64
CBFFG1313-110 . . . . . . . . . . . . . . . . . . . 50
CBFTF1029-110. . . . . . . . . . . . . . . . . 44
CETTF1027-200. . . . . . . . . . . . . . . . . . . . 33
C4TEF1013-110. . . . . . . . . . . . . . . . . . . . 65
CBFFG1314-100 . . . . . . . . . . . . . . . . . . . 50
CBFTF1029-111 . . . . . . . . . . . . . . . . . . . 44
CETTF1029-105. . . . . . . . . . . . . . . . . . . . 33
C4TEF1014-100. . . . . . . . . . . . . . . . . . . . 64
CBFFG1314-110 . . . . . . . . . . . . . . . . . . . 50
CBFTF1029-112 . . . . . . . . . . . . . . . . . . . 44
CETTF1029-106. . . . . . . . . . . . . . . . . . . . 33
C4TEF1014-110. . . . . . . . . . . . . . . . . . . . 65
CBFFG1315-100 . . . . . . . . . . . . . . . . . . . 50
CBFTF1029-113 . . . . . . . . . . . . . . . . . . . 44
CFBRM1011-100. . . . . . . . . . . . . . . . . . . 40
C4TEF1015-100. . . . . . . . . . . . . . . . . . . . 64
CBFFG1315-110 . . . . . . . . . . . . . . . . . . . 50
CBFTF1029-120 . . . . . . . . . . . . . . . . . . . 44
CFBRM1011-110. . . . . . . . . . . . . . . . . . . 40
C4TEF1015-110. . . . . . . . . . . . . . . . . . . . 65
CBFFG1317-100 . . . . . . . . . . . . . . . . . . . 50
CBFTF1029-121. . . . . . . . . . . . . . . . . 44
CFBRM1013-100. . . . . . . . . . . . . . . . . . . 40
C4TEF1016-100. . . . . . . . . . . . . . . . . . . . 64
CBFFG1329-100 . . . . . . . . . . . . . . . . . . . 50
CBFTF1029-122. . . . . . . . . . . . . . . . . 44
CFBRM1013-110. . . . . . . . . . . . . . . . . . . 40
C4TEF1016-110. . . . . . . . . . . . . . . . . . . . 65
CBFFG1329-101 . . . . . . . . . . . . . . . . . . . 50
CBFTF1029-123 . . . . . . . . . . . . . . . . . . . 44
CFBRM1014-100. . . . . . . . . . . . . . . . . . . 40
C4TEF1017-100. . . . . . . . . . . . . . . . . . . . 64
CBFFG1329-110 . . . . . . . . . . . . . . . . . . . 50
CBFTF1029-140 . . . . . . . . . . . . . . . . . . . 44
CFBRM1014-110. . . . . . . . . . . . . . . . . . . 40
C4TEF1017-110. . . . . . . . . . . . . . . . . . . . 65
CBFFG1329-111 . . . . . . . . . . . . . . . . . . . 50
CBFTF1029-141 . . . . . . . . . . . . . . . . . . . 44
CFBRM1015-100. . . . . . . . . . . . . . . . . . . 40
C4TEF1029-100. . . . . . . . . . . . . . . . . . . . 64
CBFFG1335-100 . . . . . . . . . . . . . . . . . . . 50
CBFTF1029-142 . . . . . . . . . . . . . . . . . . . 44
CFBRM1016-100. . . . . . . . . . . . . . . . . . . 40
C4TEF1029-101. . . . . . . . . . . . . . . . . . . . 64
CBFFG1340-100 . . . . . . . . . . . . . . . . . . . 50
CBFTF1029-143 . . . . . . . . . . . . . . . . . . . 44
CFBRM1017-100. . . . . . . . . . . . . . . . . . . 40
C4TEF1029-102. . . . . . . . . . . . . . . . . . . . 64
CBFTF1010-130 . . . . . . . . . . . . . . . . . . . 42
CBFTF1029-155 . . . . . . . . . . . . . . . . . . . 46
CFBRM1029-100. . . . . . . . . . . . . . . . . . . 40
C4TEF1029-103. . . . . . . . . . . . . . . . . . . . 64
CBFTF1011-100 . . . . . . . . . . . . . . . . . . . 43
CBFTF1029-156 . . . . . . . . . . . . . . . . . . . 46
CFBRM1029-101. . . . . . . . . . . . . . . . . . . 40
C4TEF1029-110. . . . . . . . . . . . . . . . . . . . 65
CBFTF1011-110 . . . . . . . . . . . . . . . . . . . 44
CBFTF1029-157. . . . . . . . . . . . . . . . . 46
CFBRM1029-110. . . . . . . . . . . . . . . . . . . 40
C4TEF1029-111. . . . . . . . . . . . . . . . . . . . 65
CBFTF1011-120 . . . . . . . . . . . . . . . . . . . 44
CBFTF1029-158. . . . . . . . . . . . . . . . . 46
CFBRM1029-111. . . . . . . . . . . . . . . . . . . 40
C4TEF1029-112. . . . . . . . . . . . . . . . . . . . 65
CBFTF1011-140 . . . . . . . . . . . . . . . . . . . 44
CBFTF1035-100 . . . . . . . . . . . . . . . . . . . 43
CFBRM1035-100. . . . . . . . . . . . . . . . . . . 40
C4TEF1029-113. . . . . . . . . . . . . . . . . . . . 65
CBFTF1011-155 . . . . . . . . . . . . . . . . . . . 46
CBFTF1039-100. . . . . . . . . . . . . . . . . 43
CFBRM1040-100. . . . . . . . . . . . . . . . . . . 40
C4TEF1035-100. . . . . . . . . . . . . . . . . . . . 64
CBFTF1013-100 . . . . . . . . . . . . . . . . . . . 43
CCH-MCM12-RJ-70S . . . . . . . . . . . . . . 108
CFBRM1313-100. . . . . . . . . . . . . . . . . . . 41
C4TEF1035-110. . . . . . . . . . . . . . . . . . . . 65
CBFTF1013-110 . . . . . . . . . . . . . . . . . . . 44
CCSCF3011-100 . . . . . . . . . . . . . . . . . . . 58
CFBRM1313-110. . . . . . . . . . . . . . . . . . . 41
CAPTF3311-100 . . . . . . . . . . . . . . . . . . . 67
CBFTF1013-120 . . . . . . . . . . . . . . . . . . . 44
CCSCF3013-100 . . . . . . . . . . . . . . . . . . . 58
CFBRM1314-100. . . . . . . . . . . . . . . . . . . 41
CAPTF3311-110 . . . . . . . . . . . . . . . . . . . 67
CBFTF1013-140 . . . . . . . . . . . . . . . . . . . 44
CCSCF3014-100 . . . . . . . . . . . . . . . . . . . 58
CFBRM1314-110. . . . . . . . . . . . . . . . . . . 41
CAPTF3313-100 . . . . . . . . . . . . . . . . . . . 67
CBFTF1013-155 . . . . . . . . . . . . . . . . . . . 46
CCSCF3015-100 . . . . . . . . . . . . . . . . . . . 58
CFBRM1315-100. . . . . . . . . . . . . . . . . . . 41
CAPTF3313-110 . . . . . . . . . . . . . . . . . . . 67
CBFTF1014-100 . . . . . . . . . . . . . . . . . . . 43
CCSCF3016-100 . . . . . . . . . . . . . . . . . . . 58
CFBRM1315-110. . . . . . . . . . . . . . . . . . . 41
CAPTF3314-100 . . . . . . . . . . . . . . . . . . . 67
CBFTF1014-110 . . . . . . . . . . . . . . . . . . . 44
CCSCF3017-100 . . . . . . . . . . . . . . . . . . . 58
CFBRM1317-100. . . . . . . . . . . . . . . . . . . 41
CAPTF3314-110 . . . . . . . . . . . . . . . . . . . 67
CBFTF1014-120 . . . . . . . . . . . . . . . . . . . 44
CCSCF3018-100 . . . . . . . . . . . . . . . . . . . 58
CFBRM1329-100. . . . . . . . . . . . . . . . . . . 41
CAPTF3315-100 . . . . . . . . . . . . . . . . . . . 67
CBFTF1014-140 . . . . . . . . . . . . . . . . . . . 44
CCSCF3029-100 . . . . . . . . . . . . . . . . . . . 58
CFBRM1329-101. . . . . . . . . . . . . . . . . . . 41
CAPTF3315-110 . . . . . . . . . . . . . . . . . . . 67
CBFTF1014-155 . . . . . . . . . . . . . . . . . . . 46
CCSCF3029-101 . . . . . . . . . . . . . . . . . . . 58
CFBRM1329-110. . . . . . . . . . . . . . . . . . . 41
CAPTF3329-100 . . . . . . . . . . . . . . . . . . . 67
CBFTF1015-100 . . . . . . . . . . . . . . . . . . . 43
CCSCF3029-102 . . . . . . . . . . . . . . . . . . . 58
CFBRM1329-111. . . . . . . . . . . . . . . . . . . 41
CAPTF3329-101 . . . . . . . . . . . . . . . . . . . 67
CBFTF1015-110 . . . . . . . . . . . . . . . . . . . 44
CCSCF3029-103 . . . . . . . . . . . . . . . . . . . 58
CFBRM1335-100. . . . . . . . . . . . . . . . . . . 41
CAPTF3329-102 . . . . . . . . . . . . . . . . . . . 67
CBFTF1015-120 . . . . . . . . . . . . . . . . . . . 44
CEMTF1011-100 . . . . . . . . . . . . . . . . . . . 66
CFETF1011-105. . . . . . . . . . . . . . . . . . . . 35
CAPTF3329-103 . . . . . . . . . . . . . . . . . . . 67
CBFTF1015-140 . . . . . . . . . . . . . . . . . . . 44
CEMTF1013-100 . . . . . . . . . . . . . . . . . . . 66
CFETF1011-205. . . . . . . . . . . . . . . . . . . . 36
CAPTF3329-110 . . . . . . . . . . . . . . . . . . . 67
CBFTF1015-155 . . . . . . . . . . . . . . . . . . . 46
CEMTF1014-100 . . . . . . . . . . . . . . . . . . . 66
CFETF1013-105. . . . . . . . . . . . . . . . . . . . 35
CAPTF3329-111 . . . . . . . . . . . . . . . . . . . 67
CBFTF1016-100 . . . . . . . . . . . . . . . . . . . 43
CEMTF1015-100 . . . . . . . . . . . . . . . . . . . 66
CFETF1013-205. . . . . . . . . . . . . . . . . . . . 36
< 182 >
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
Product Number Index
Product Number
Page
Product Number
Page
Product Number
Page
Product Number
Page
CFETF1014-105. . . . . . . . . . . . . . . . . . . . 35
CFMFF1329-282 . . . . . . . . . . . . . . . . . . . 54
CGFEB1040-100 . . . . . . . . . . . . . . . . . . . 47
CPSMC0200-226. . . . . . . . . . . . . . . . . . . 20
CFETF1014-205. . . . . . . . . . . . . . . . . . . . 36
CFMFF1329-283 . . . . . . . . . . . . . . . . . . . 54
CMEFG1013-100 . . . . . . . . . . . . . . . . . . . 51
CPSMC0800-100. . . . . . . . . . . . . . . . . . . 20
CFETF1015-105. . . . . . . . . . . . . . . . . . . . 35
CFMFF1329-286 . . . . . . . . . . . . . . . . . . . 54
CMEFG1013-110 . . . . . . . . . . . . . . . . . . . 51
CPSMC0810-100. . . . . . . . . . . . . . . . . . . 20
CFETF1015-205. . . . . . . . . . . . . . . . . . . . 36
CFMFF1329-287 . . . . . . . . . . . . . . . . . . . 54
CMEFG1014-100 . . . . . . . . . . . . . . . . . . . 51
CPSMC1300-100. . . . . . . . . . . . . . . . . . . 21
CFETF1016-105. . . . . . . . . . . . . . . . . . . . 35
CFMFF1335-220 . . . . . . . . . . . . . . . . . . . 53
CMEFG1014-110 . . . . . . . . . . . . . . . . . . . 51
CPSMC1310-100. . . . . . . . . . . . . . . . . . . 21
CFETF1016-205. . . . . . . . . . . . . . . . . . . . 36
CFMFF1335-280 . . . . . . . . . . . . . . . . . . . 54
CMEFG1015-100 . . . . . . . . . . . . . . . . . . . 51
CPSMC1320-100. . . . . . . . . . . . . . . . . . . 21
CFETF1017-105. . . . . . . . . . . . . . . . . . . . 35
CFMFF1414-200 . . . . . . . . . . . . . . . . . . . 38
CMEFG1015-110 . . . . . . . . . . . . . . . . . . . 51
CPSMC1800-200. . . . . . . . . . . . . . . . . . . 21
CFETF1017-205. . . . . . . . . . . . . . . . . . . . 36
CFMFF1414-220 . . . . . . . . . . . . . . . . . . . 53
CMEFG1017-100 . . . . . . . . . . . . . . . . . . . 51
CPSMC1810-200. . . . . . . . . . . . . . . . . . . 21
CFETF1018-105. . . . . . . . . . . . . . . . . . . . 35
CFMFF1414-280 . . . . . . . . . . . . . . . . . . . 54
CMEFG1019-100 . . . . . . . . . . . . . . . . . . . 51
CPSMC1900-100. . . . . . . . . . . . . . . . . . . 21
CFETF1018-205. . . . . . . . . . . . . . . . . . . . 36
CFMFF1415-200 . . . . . . . . . . . . . . . . . . . 38
CMEFG1019-110 . . . . . . . . . . . . . . . . . . . 51
CPSMC1910-100. . . . . . . . . . . . . . . . . . . 21
CFETF1019-205. . . . . . . . . . . . . . . . . . . . 36
CFMFF1424-220 . . . . . . . . . . . . . . . . . . . 53
CMEFG1029-100 . . . . . . . . . . . . . . . . . . . 51
CPSMM-120 . . . . . . . . . . . . . . . . . . . . . . 24
CFETF1029-205. . . . . . . . . . . . . . . . . . . . 36
CFMFF1429-200 . . . . . . . . . . . . . . . . . . . 38
CMEFG1029-101 . . . . . . . . . . . . . . . . . . . 51
CPSMM-200 . . . . . . . . . . . . . . . . . . . . . . 24
CFETF1029-206. . . . . . . . . . . . . . . . . . . . 36
CFMFF1429-201 . . . . . . . . . . . . . . . . . . . 38
CMEFG1029-102 . . . . . . . . . . . . . . . . . . . 51
CPSMM-210 . . . . . . . . . . . . . . . . . . . . . . 24
CFETF1029-207. . . . . . . . . . . . . . . . . . . . 36
CFMFF1429-202 . . . . . . . . . . . . . . . . . . . 38
CMEFG1029-103 . . . . . . . . . . . . . . . . . . . 51
CPSMP-120. . . . . . . . . . . . . . . . . . . . . . . 21
CFETF1029-208 . . . . . . . . . . . . . . . . . 36
CFMFF1429-203 . . . . . . . . . . . . . . . . . . . 38
CMEFG1029-110 . . . . . . . . . . . . . . . . . . . 51
CPSMP-130. . . . . . . . . . . . . . . . . . . . . . . 21
CFETF1029-209. . . . . . . . . . . . . . . . . . . . 36
CFMFF1429-210 . . . . . . . . . . . . . . . . . . . 57
CMEFG1029-111 . . . . . . . . . . . . . . . . . . . 51
CPSMP-140. . . . . . . . . . . . . . . . . . . . . . . 21
CFETF1029-210. . . . . . . . . . . . . . . . . . . . 36
CFMFF1429-211 . . . . . . . . . . . . . . . . . . . 57
CMEFG1035-100 . . . . . . . . . . . . . . . . . . . 51
CPSMP-180. . . . . . . . . . . . . . . . . . . . . . . 20
CFETF1029-211. . . . . . . . . . . . . . . . . . . . 36
CFMFF1429-212 . . . . . . . . . . . . . . . . . . . 57
CMEFG1039-100 . . . . . . . . . . . . . . . . . . . 51
CPSMP-190. . . . . . . . . . . . . . . . . . . . . . . 20
CFETF1029-212. . . . . . . . . . . . . . . . . . . . 36
CFMFF1429-213 . . . . . . . . . . . . . . . . . . . 57
CMEFG1039-110 . . . . . . . . . . . . . . . . . . . 51
CPSMP-200. . . . . . . . . . . . . . . . . . . . . . . 21
CFETF1039-205. . . . . . . . . . . . . . . . . . . . 36
CFMFF4040-100 . . . . . . . . . . . . . . . . . . . 56
CMEFG1040-100 . . . . . . . . . . . . . . . . . . . 51
CPSMP-210. . . . . . . . . . . . . . . . . . . . . . . 21
CFMFF1313-200 . . . . . . . . . . . . . . . . . . . 38
CGETF1013-110 . . . . . . . . . . . . . . . . . . . 52
CPC-5EB-01F. . . . . . . . . . . . . . . . . . . . . 165
CPSRE1-190 . . . . . . . . . . . . . . . . . . . . . . 20
CFMFF1313-220 . . . . . . . . . . . . . . . . . . . 53
CGETF1014-110 . . . . . . . . . . . . . . . . . . . 52
CPC-5EB-02F. . . . . . . . . . . . . . . . . . . . . 165
CPSRE2-190 . . . . . . . . . . . . . . . . . . . . . . 20
CFMFF1314-200 . . . . . . . . . . . . . . . . . . . 38
CGETF1015-110 . . . . . . . . . . . . . . . . . . . 52
CPC-5EB-03F. . . . . . . . . . . . . . . . . . . . . 165
CPSRE-230 . . . . . . . . . . . . . . . . . . . . . . . 21
CFMFF1314-210 . . . . . . . . . . . . . . . . . . . 57
CGETF1017-110 . . . . . . . . . . . . . . . . . . . 52
CPC-5EB-05F. . . . . . . . . . . . . . . . . . . . . 165
CPSRE-238 . . . . . . . . . . . . . . . . . . . . . . . 20
CFMFF1314-220 . . . . . . . . . . . . . . . . . . . 53
CGETF1024-110 . . . . . . . . . . . . . . . . . . . 52
CPC-5EB-07F. . . . . . . . . . . . . . . . . . . . . 165
CPSVT2611-100 . . . . . . . . . . . . . . . . . . . 59
CFMFF1314-280 . . . . . . . . . . . . . . . . . . . 54
CGETF1029-110 . . . . . . . . . . . . . . . . . . . 52
CPC-5EB-10F. . . . . . . . . . . . . . . . . . . . . 165
CPSVT2613-100 . . . . . . . . . . . . . . . . . . . 59
CFMFF1315-200 . . . . . . . . . . . . . . . . . . . 38
CGETF1029-111 . . . . . . . . . . . . . . . . . . . 52
CPC-6B-01F. . . . . . . . . . . . . . . . . . . . . . 165
CPSVT2614-100 . . . . . . . . . . . . . . . . . . . 59
CFMFF1315-220 . . . . . . . . . . . . . . . . . . . 53
CGETF1029-112 . . . . . . . . . . . . . . . . . . . 52
CPC-6B-03F. . . . . . . . . . . . . . . . . . . . . . 165
CPSVT2629-100 . . . . . . . . . . . . . . . . . . . 59
CFMFF1315-280 . . . . . . . . . . . . . . . . . . . 54
CGETF1029-113 . . . . . . . . . . . . . . . . . . . 52
CPC-6B-05F. . . . . . . . . . . . . . . . . . . . . . 165
CPSVT2629-101 . . . . . . . . . . . . . . . . . . . 59
CFMFF1316-200 . . . . . . . . . . . . . . . . . . . 38
CGETF1035-110 . . . . . . . . . . . . . . . . . . . 52
CPC-6B-07F. . . . . . . . . . . . . . . . . . . . . . 165
CPSVT2629-102 . . . . . . . . . . . . . . . . . . . 59
CFMFF1316-210 . . . . . . . . . . . . . . . . . . . 57
CGETF1039-110 . . . . . . . . . . . . . . . . . . . 52
CPC-6B-10F. . . . . . . . . . . . . . . . . . . . . . 165
CPSVT2629-103 . . . . . . . . . . . . . . . . . . . 59
CFMFF1317-200 . . . . . . . . . . . . . . . . . . . 38
CGETF1040-110 . . . . . . . . . . . . . . . . . . . 52
CPC-X5ER-01F . . . . . . . . . . . . . . . . . . . 165
CRMFE1011-200 . . . . . . . . . . . . . . . . . . . 37
CFMFF1317-210 . . . . . . . . . . . . . . . . . . . 57
CGFEB1013-100 . . . . . . . . . . . . . . . . . . . 47
CPC-X5ER-02F . . . . . . . . . . . . . . . . . . . 165
CRMFE1013-200 . . . . . . . . . . . . . . . . . . . 37
CFMFF1317-220 . . . . . . . . . . . . . . . . . . . 53
CGFEB1013-110 . . . . . . . . . . . . . . . . . . . 48
CPC-X5ER-03F . . . . . . . . . . . . . . . . . . . 165
CRMFE1014-200 . . . . . . . . . . . . . . . . . . . 37
CFMFF1317-280 . . . . . . . . . . . . . . . . . . . 54
CGFEB1014-100 . . . . . . . . . . . . . . . . . . . 47
CPC-X5ER-05F . . . . . . . . . . . . . . . . . . . 165
CRMFE1015-200 . . . . . . . . . . . . . . . . . . . 37
CFMFF1324-220 . . . . . . . . . . . . . . . . . . . 53
CGFEB1014-110 . . . . . . . . . . . . . . . . . . . 48
CPC-X5ER-07F . . . . . . . . . . . . . . . . . . . 165
CRMFE1016-200 . . . . . . . . . . . . . . . . . . . 37
CFMFF1324-280 . . . . . . . . . . . . . . . . . . . 54
CGFEB1015-100 . . . . . . . . . . . . . . . . . . . 47
CPC-X5ER-10F . . . . . . . . . . . . . . . . . . . 165
CRMFE1017-200 . . . . . . . . . . . . . . . . . . . 37
CFMFF1329-200 . . . . . . . . . . . . . . . . . . . 38
CGFEB1015-110 . . . . . . . . . . . . . . . . . . . 48
CPC-X6R-01F . . . . . . . . . . . . . . . . . . . . 165
CRMFE1018-200 . . . . . . . . . . . . . . . . . . . 37
CFMFF1329-201 . . . . . . . . . . . . . . . . . . . 38
CGFEB1017-100 . . . . . . . . . . . . . . . . . . . 47
CPC-X6R-03F . . . . . . . . . . . . . . . . . . . . 165
CRMFE1029-200 . . . . . . . . . . . . . . . . . . . 37
CFMFF1329-202 . . . . . . . . . . . . . . . . . . . 38
CGFEB1017-110 . . . . . . . . . . . . . . . . . . . 48
CPC-X6R-05F . . . . . . . . . . . . . . . . . . . . 165
CRMFE1029-201 . . . . . . . . . . . . . . . . . . . 37
CFMFF1329-203 . . . . . . . . . . . . . . . . . . . 38
CGFEB1024-100 . . . . . . . . . . . . . . . . . . . 47
CPC-X6R-07F . . . . . . . . . . . . . . . . . . . . 165
CRMFE1029-202 . . . . . . . . . . . . . . . . . . . 37
CFMFF1329-210 . . . . . . . . . . . . . . . . . . . 57
CGFEB1024-110 . . . . . . . . . . . . . . . . . . . 48
CPC-X6R-10F . . . . . . . . . . . . . . . . . . . . 165
CRMFE1029-203 . . . . . . . . . . . . . . . . . . . 37
CFMFF1329-211 . . . . . . . . . . . . . . . . . . . 57
CGFEB1029-100 . . . . . . . . . . . . . . . . . . . 47
CPSFM-200 . . . . . . . . . . . . . . . . . . . . . . . 21
CRMFE1035-200 . . . . . . . . . . . . . . . . . . . 37
CFMFF1329-212 . . . . . . . . . . . . . . . . . . . 57
CGFEB1029-101 . . . . . . . . . . . . . . . . . . . 47
CPSFP-200 . . . . . . . . . . . . . . . . . . . . 20–21
CRS2F3111-100 . . . . . . . . . . . . . . . . . . . 60
CFMFF1329-213 . . . . . . . . . . . . . . . . . . . 57
CGFEB1029-102 . . . . . . . . . . . . . . . . . . . 47
CPSLD-100 . . . . . . . . . . . . . . . . . . . . 20–21
CRS2F3113-100 . . . . . . . . . . . . . . . . . . . 60
CFMFF1329-220 . . . . . . . . . . . . . . . . . . . 53
CGFEB1029-103 . . . . . . . . . . . . . . . . . . . 47
CPSMC0100-200. . . . . . . . . . . . . . . . . . . 20
CRS2F3114-100 . . . . . . . . . . . . . . . . . . . 60
CFMFF1329-221 . . . . . . . . . . . . . . . . . . . 53
CGFEB1029-104 . . . . . . . . . . . . . . . . . . . 47
CPSMC0100-210. . . . . . . . . . . . . . . . . . . 20
CRS2F3115-100 . . . . . . . . . . . . . . . . . . . 60
CFMFF1329-222 . . . . . . . . . . . . . . . . . . . 53
CGFEB1029-105 . . . . . . . . . . . . . . . . . . . 47
CPSMC0100-226. . . . . . . . . . . . . . . . . . . 20
CRS4F3111-100 . . . . . . . . . . . . . . . . . . . 61
CFMFF1329-223 . . . . . . . . . . . . . . . . . . . 53
CGFEB1029-110 . . . . . . . . . . . . . . . . . . . 48
CPSMC0200-200. . . . . . . . . . . . . . . . . . . 20
CRS4F3113-100 . . . . . . . . . . . . . . . . . . . 61
CFMFF1329-280 . . . . . . . . . . . . . . . . . . . 54
CGFEB1029-111 . . . . . . . . . . . . . . . . . . . 48
CPSMC0200-210. . . . . . . . . . . . . . . . . . . 20
CRS4F3114-100 . . . . . . . . . . . . . . . . . . . 61
CFMFF1329-281 . . . . . . . . . . . . . . . . . . . 54
CGFEB1035-100 . . . . . . . . . . . . . . . . . . . 47
CPSMC0200-221. . . . . . . . . . . . . . . . . . . 20
CRS4F3115-100 . . . . . . . . . . . . . . . . . . . 61
Call us at 800-526-9267 or 952-941-7600
< 183 >
Table of Contents
Select Media Converter
Select Switch
Product Number Index
Product Number
Page
Product Number
Page
Product Number
Page
Product Number
Page
CRS4F3211-100 . . . . . . . . . . . . . . . . . . . 61
CWDM-A1A453LCR. . . . . . . . . . . . . . . . 137
CWDM-M553LCR . . . . . . . . . . . . . . . . . 137
E-TBT-FRL-05(XLHT) . . . . . . . . . . . . . . . 75
CRS4F3213-100 . . . . . . . . . . . . . . . . . . . 61
CWDM-A1A453SCR . . . . . . . . . . . . . . . 137
CWDM-M553SCR . . . . . . . . . . . . . . . . . 137
E-TBT-FRL-N-02(SC). . . . . . . . . . . . . . . 133
CRS4F3214-100 . . . . . . . . . . . . . . . . . . . 61
CWDM-A1A455LCR. . . . . . . . . . . . . . . . 137
CWDM-M555LCR . . . . . . . . . . . . . . . . . 137
E-TBT-FRL-N-02(ST) . . . . . . . . . . . . . . . 133
CRS4F3215-100 . . . . . . . . . . . . . . . . . . . 61
CWDM-A1A455SCR . . . . . . . . . . . . . . . 137
CWDM-M847LCR . . . . . . . . . . . . . . . . . 137
E-TBT-FRL-NLP-02(SC). . . . . . . . . . . . . 133
CSDTF1011-105 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1A847LCR. . . . . . . . . . . . . . . . 137
CWDM-M847SCR . . . . . . . . . . . . . . . . . 137
E-TBT-FRL-NLP-02(ST). . . . . . . . . . . . . 133
CSDTF1012-105 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1A847SCR . . . . . . . . . . . . . . . 137
CWDM-M947LCR . . . . . . . . . . . . . . . . . 137
E-TBT-MC04 . . . . . . . . . . . . . . . . . . . . . 132
CSDTF1013-105 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1B451LCR. . . . . . . . . . . . . . . . 137
CWDM-M947SCR . . . . . . . . . . . . . . . . . 137
FPC-MD5G-LCLC-01M . . . . . . . . . . . . . 164
CSDTF1014-105 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1B451SCR . . . . . . . . . . . . . . . 137
CWDM-MB19R1 . . . . . . . . . . . . . . . . . . 137
FPC-MD5G-LCLC-02M . . . . . . . . . . . . . 164
CSDTF1015-105 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1B453LCR. . . . . . . . . . . . . . . . 137
E-100BTX-FX-05 . . . . . . . . . . . . . . . . . . . 81
FPC-MD5G-LCLC-03M . . . . . . . . . . . . . 164
CSDTF1016-105 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1B453SCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(100). . . . . . . . . . . . . . . 81
FPC-MD5G-LCLC-05M . . . . . . . . . . . . . 164
CSDTF1017-105 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1B455LCR. . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(101). . . . . . . . . . . . . . . 81
FPC-MD5G-LCSC-01M . . . . . . . . . . . . . 164
CSDTF1018-105 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1B455SCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(102). . . . . . . . . . . . . . . 81
FPC-MD5G-LCSC-02M . . . . . . . . . . . . . 164
CSDTF1022-105 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1B847LCR. . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(103). . . . . . . . . . . . . . . 81
FPC-MD5G-LCSC-03M . . . . . . . . . . . . . 164
CSDTF1027-105 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1B847SCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(104). . . . . . . . . . . . . . . 81
FPC-MD5G-LCSC-05M . . . . . . . . . . . . . 164
CSDTF1029-105 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1C451SCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(105). . . . . . . . . . . . . . . 81
FPC-MD5G-LCST-01M . . . . . . . . . . . . . 164
CSDTF1029-106 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1C453LCR. . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(106). . . . . . . . . . . . . . . 81
FPC-MD5G-LCST-02M . . . . . . . . . . . . . 164
CSDTF1029-107 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1C453SCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(107). . . . . . . . . . . . . . . 81
FPC-MD5G-LCST-03M . . . . . . . . . . . . . 164
CSDTF1029-108 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1C455LCR. . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(HT) . . . . . . . . . . . . . 82
FPC-MD5G-LCST-05M . . . . . . . . . . . . . 164
CSDTF3011-115 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1C455SCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(LC). . . . . . . . . . . . . . . . 81
FPC-MD5G-SCSC-01M . . . . . . . . . . . . . 164
CSDTF3012-115 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1C847LCR. . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(LH) . . . . . . . . . . . . . 81
FPC-MD5G-SCSC-02M . . . . . . . . . . . . . 164
CSDTF3013-115 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1C847SCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(LHHT) . . . . . . . . . . . 82
FPC-MD5G-SCSC-03M . . . . . . . . . . . . . 164
CSDTF3014-115 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1D451LCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(LW) . . . . . . . . . . . . . 81
FPC-MD5G-SCSC-05M . . . . . . . . . . . . . 164
CSDTF3015-115 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1D451SCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(LWHT) . . . . . . . . . . . 82
FPC-MD5-LCLC-01M. . . . . . . . . . . . . . . 164
CSDTF3016-115 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1D453LCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(MT) . . . . . . . . . . . . . . . 81
FPC-MD5-LCLC-02M. . . . . . . . . . . . . . . 164
CSDTF3017-115 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1D453SCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(SC) . . . . . . . . . . . . . . . 81
FPC-MD5-LCLC-03M. . . . . . . . . . . . . . . 164
CSDTF3018-115 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1D455LCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(SCHT) . . . . . . . . . . . . . 82
FPC-MD5-LCLC-05M. . . . . . . . . . . . . . . 164
CSDTF3022-115 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1D455SCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(SM) . . . . . . . . . . . . . 81
FPC-MD5-LCSC-01M . . . . . . . . . . . . . . 164
CSDTF3027-115 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1D847LCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(SMHT) . . . . . . . . . . . 82
FPC-MD5-LCSC-02M . . . . . . . . . . . . . . 164
CSDTF3029-115 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1D847SCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(SMLC) . . . . . . . . . . . . . 81
FPC-MD5-LCSC-03M . . . . . . . . . . . . . . 164
CSDTF3029-116 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1E847LCR. . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(XL) . . . . . . . . . . . . . 81
FPC-MD5-LCSC-05M . . . . . . . . . . . . . . 164
CSDTF3029-117 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1E847SCR. . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(XLHT) . . . . . . . . . . . 82
FPC-MD5-LCST-01M. . . . . . . . . . . . . . . 164
CSDTF3029-118 . . . . . . . . . . . . . . . . . . . 62
CWDM-A1F847LCR. . . . . . . . . . . . . . . . 137
E-100BTX-FX-05(XLW) . . . . . . . . . . . . 81
FPC-MD5-LCST-02M. . . . . . . . . . . . . . . 164
CSEFE1012-100 . . . . . . . . . . . . . . . . . . . 34
CWDM-A1F847SCR. . . . . . . . . . . . . . . . 137
E-100BTX-FX-N-01 . . . . . . . . . . . . . . . . 133
FPC-MD5-LCST-03M. . . . . . . . . . . . . . . 164
CSEFE1014-100 . . . . . . . . . . . . . . . . . . . 34
CWDM-A1G847LCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-N-01(SC). . . . . . . . . . . . . 133
FPC-MD5-LCST-05M. . . . . . . . . . . . . . . 164
CSEFE1015-100 . . . . . . . . . . . . . . . . . . . 34
CWDM-A1G847SCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-N-01(SM) . . . . . . . . . . 133
FPC-MD5-SCSC-01M . . . . . . . . . . . . . . 164
CSEFE1022-100 . . . . . . . . . . . . . . . . . . . 34
CWDM-A1H847LCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-NLP-01 . . . . . . . . . . . . . . 133
FPC-MD5-SCSC-02M . . . . . . . . . . . . . . 164
CSEFE1029-100 . . . . . . . . . . . . . . . . . . . 34
CWDM-A1H847SCR . . . . . . . . . . . . . . . 137
E-100BTX-FX-NLP-01(SC) . . . . . . . . . . 133
FPC-MD5-SCSC-03M . . . . . . . . . . . . . . 164
CSEFE1029-101 . . . . . . . . . . . . . . . . . . . 34
CWDM-M451LCR . . . . . . . . . . . . . . . . . 137
E-100BTX-FX-NLP-01(SM). . . . . . . . . 133
FPC-MD5-SCSC-05M . . . . . . . . . . . . . . 164
CSETF1011-205 . . . . . . . . . . . . . . . . . . . 39
CWDM-M451SCR . . . . . . . . . . . . . . . . . 137
E-MCR-04 . . . . . . . . . . . . . . . . . . . . . . . . 70
FPC-MD6-LCLC-01M. . . . . . . . . . . . . . . 164
CSETF1013-205 . . . . . . . . . . . . . . . . . . . 39
CWDM-M451ULCR . . . . . . . . . . . . . . . . 137
E-MCR-04(T) . . . . . . . . . . . . . . . . . . . . . . 70
FPC-MD6-LCLC-02M. . . . . . . . . . . . . . . 164
CVIDF2011-110. . . . . . . . . . . . . . . . . . . . 69
CWDM-M451USCR . . . . . . . . . . . . . . . . 137
E-TBT-FRL-05 . . . . . . . . . . . . . . . . . . . . . 74
FPC-MD6-LCLC-03M. . . . . . . . . . . . . . . 164
CVIDF2011-150. . . . . . . . . . . . . . . . . . . . 68
CWDM-M453LCR . . . . . . . . . . . . . . . . . 137
E-TBT-FRL-05(HT). . . . . . . . . . . . . . . . . . 75
FPC-MD6-LCSC-01M . . . . . . . . . . . . . . 164
CVIDF2011-155. . . . . . . . . . . . . . . . . . . . 68
CWDM-M453SCR . . . . . . . . . . . . . . . . . 137
E-TBT-FRL-05(L) . . . . . . . . . . . . . . . . . . . 74
FPC-MD6-LCSC-02M . . . . . . . . . . . . . . 164
CVIDF2012-110. . . . . . . . . . . . . . . . . . . . 69
CWDM-M453ULCR . . . . . . . . . . . . . . . . 137
E-TBT-FRL-05(LH). . . . . . . . . . . . . . . . . . 74
FPC-MD6-LCSC-03M . . . . . . . . . . . . . . 164
CVIDF2012-150. . . . . . . . . . . . . . . . . . . . 68
CWDM-M453USCR . . . . . . . . . . . . . . . . 137
E-TBT-FRL-05(MT) . . . . . . . . . . . . . . . . . 74
FPC-MD6-LCSC-05M . . . . . . . . . . . . . . 164
CVIDF2012-155. . . . . . . . . . . . . . . . . . . . 68
CWDM-M455LCR . . . . . . . . . . . . . . . . . 137
E-TBT-FRL-05(SC). . . . . . . . . . . . . . . . . . 74
FPC-MD6-LCST-01M. . . . . . . . . . . . . . . 164
CVIDF2013-110. . . . . . . . . . . . . . . . . . . . 69
CWDM-M455SCR . . . . . . . . . . . . . . . . . 137
E-TBT-FRL-05(SCHT) . . . . . . . . . . . . . . . 75
FPC-MD6-LCST-02M. . . . . . . . . . . . . . . 164
CVIDF2013-150. . . . . . . . . . . . . . . . . . . . 68
CWDM-M455ULCR . . . . . . . . . . . . . . . . 137
E-TBT-FRL-05(SM) . . . . . . . . . . . . . . . . . 74
FPC-MD6-LCST-03M. . . . . . . . . . . . . . . 164
CVIDF2013-155. . . . . . . . . . . . . . . . . . . . 68
CWDM-M455USCR . . . . . . . . . . . . . . . . 137
E-TBT-FRL-05(SMHT) . . . . . . . . . . . . . . . 75
FPC-MD6-MTSC-01M . . . . . . . . . . . . . . 164
CWDM-A1A451LCR. . . . . . . . . . . . . . . . 137
CWDM-M551LCR . . . . . . . . . . . . . . . . . 137
E-TBT-FRL-05(XC). . . . . . . . . . . . . . . . . . 74
FPC-MD6-MTSC-02M . . . . . . . . . . . . . . 164
CWDM-A1A451SCR . . . . . . . . . . . . . . . 137
CWDM-M551SCR . . . . . . . . . . . . . . . . . 137
E-TBT-FRL-05(XCHT) . . . . . . . . . . . . . . . 75
FPC-MD6-MTSC-03M . . . . . . . . . . . . . . 164
< 184 >
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
Product Number Index
Product Number
Page
Product Number
Page
Product Number
Page
Product Number
Page
FPC-MD6-MTST-01M . . . . . . . . . . . . . . 164
J/FE-CF-03(SC) . . . . . . . . . . . . . . . . . . . . 83
MIL-S500 . . . . . . . . . . . . . . . . . . . . . . . 154
NDM-FTX-SC-01 . . . . . . . . . . . . . . . . . . 140
FPC-MD6-MTST-02M . . . . . . . . . . . . . . 164
J/FE-CF-03(SM) . . . . . . . . . . . . . . . . . . . 83
MIL-S5000T . . . . . . . . . . . . . . . . . . . . . 158
NDM-FTX-SC-01-020 . . . . . . . . . . . . . . 140
FPC-MD6-MTST-03M . . . . . . . . . . . . . . 164
J/GE-CF-01(LX1) . . . . . . . . . . . . . . . . . . 105
MIL-S501SC . . . . . . . . . . . . . . . . . . . . . 156
NDM-FTX-SC-01(L). . . . . . . . . . . . . . . . 140
FPC-MD6-SCSC-01M . . . . . . . . . . . . . . 164
J/GE-CF-01(LX101) . . . . . . . . . . . . . . . . 105
MIL-S501SC-15. . . . . . . . . . . . . . . . . . . 156
NDM-FTX-SC-01(L)-020 . . . . . . . . . . . . 140
FPC-MD6-SCSC-02M . . . . . . . . . . . . . . 164
J/GE-CF-01(LX2) . . . . . . . . . . . . . . . . . . 105
MIL-S501SC-30. . . . . . . . . . . . . . . . . . . 156
NDM-FTX-SC20-01 . . . . . . . . . . . . . . . . 140
FPC-MD6-SCSC-03M . . . . . . . . . . . . . . 164
J/GE-CF-01(LX6) . . . . . . . . . . . . . . . . . . 105
MIL-S501SC-60. . . . . . . . . . . . . . . . . . . 156
NDM-FTX-SC20-01(L). . . . . . . . . . . . . . 140
FPC-MD6-SCSC-05M . . . . . . . . . . . . . . 164
J/GE-CF-01(SX). . . . . . . . . . . . . . . . . . . 105
MIL-S501ST . . . . . . . . . . . . . . . . . . . . . 156
NDM-FTX-SC5-01 . . . . . . . . . . . . . . . . . 140
FPC-MD6-STSC-01M . . . . . . . . . . . . . . 164
J/POE-CF-01 . . . . . . . . . . . . . . . . . . . . . . 98
MIL-S800 . . . . . . . . . . . . . . . . . . . . . . . 154
NDM-FTX-SC5-01-020 . . . . . . . . . . . . . 140
FPC-MD6-STSC-02M . . . . . . . . . . . . . . 164
J/POE-CF-01(SC). . . . . . . . . . . . . . . . . . . 98
MIL-S8000G . . . . . . . . . . . . . . . . . . . . . 160
NDM-FTX-SC5-01(L). . . . . . . . . . . . . . . 140
FPC-MD6-STSC-03M . . . . . . . . . . . . . . 164
J/POE-CF-01(SM) . . . . . . . . . . . . . . . . . . 98
MIL-S8TA . . . . . . . . . . . . . . . . . . . . . . . 159
NDM-FTX-SC5-01(L)-020 . . . . . . . . . . . 140
FPC-MD6-STSC-05M . . . . . . . . . . . . . . 164
J/RS232-CF-01 . . . . . . . . . . . . . . . . . . . 115
MIL-S8001TG . . . . . . . . . . . . . . . . . . . . 161
NDM-FTX-ST-01 . . . . . . . . . . . . . . . . . . 140
FPC-MD6-STST-01M. . . . . . . . . . . . . . . 164
J/RS232-CF-01(SC). . . . . . . . . . . . . . . . 115
MIL-S800i . . . . . . . . . . . . . . . . . . . . . . . 155
NDM-FTX-ST-01-020. . . . . . . . . . . . . . . 140
FPC-MD6-STST-02M. . . . . . . . . . . . . . . 164
J/RS232-TF-01 . . . . . . . . . . . . . . . . . . . 115
MIL-S801SC . . . . . . . . . . . . . . . . . . . . . 156
NDM-FTX-ST-01(L) . . . . . . . . . . . . . . . . 140
FPC-MD6-STST-03M. . . . . . . . . . . . . . . 164
J/RS232-TF-01(SC). . . . . . . . . . . . . . . . 115
MIL-S801SC-60. . . . . . . . . . . . . . . . . . . 156
NDM-FTX-ST-01(L)-020 . . . . . . . . . . . . 140
FPC-MD6-STST-05M. . . . . . . . . . . . . . . 164
J/VD-MRX-01 . . . . . . . . . . . . . . . . . . . . 122
MIL-S801ST . . . . . . . . . . . . . . . . . . . . . 156
N-FX-LC-02 . . . . . . . . . . . . . . . . . . . . . . 139
FPC-SD-LCLC-01M . . . . . . . . . . . . . . . . 164
J/VD-MRX-01(SC) . . . . . . . . . . . . . . . . . 122
MIL-SM24004TG. . . . . . . . . . . . . . . . . . 153
N-FX-LC-02-020 . . . . . . . . . . . . . . . . . . 139
FPC-SD-LCLC-02M . . . . . . . . . . . . . . . . 164
J/VD-MRX-01(SM) . . . . . . . . . . . . . . . . 122
MIL-SM2401MAF . . . . . . . . . . . . . . . . . 150
N-FX-LC-02(L). . . . . . . . . . . . . . . . . . . . 139
FPC-SD-LCLC-03M . . . . . . . . . . . . . . . . 164
J/VD-RX-01 . . . . . . . . . . . . . . . . . . . . . . 122
MIL-SM2401M-STK . . . . . . . . . . . . . . . 147
N-FX-LC-02(L)-020 . . . . . . . . . . . . . . . . 139
FPC-SD-LCSC-01M . . . . . . . . . . . . . . . . 164
JVD-RX-01(SC) . . . . . . . . . . . . . . . . . . . 122
MIL-SM4804G. . . . . . . . . . . . . . . . . . . . 151
N-FX-MT-02. . . . . . . . . . . . . . . . . . . . . . 139
FPC-SD-LCSC-02M . . . . . . . . . . . . . . . . 164
JVD-RX-01(SM) . . . . . . . . . . . . . . . . . . 122
MIL-SM8002TG. . . . . . . . . . . . . . . . . . . 152
N-FX-MT-02-020 . . . . . . . . . . . . . . . . . . 139
FPC-SD-LCSC-03M . . . . . . . . . . . . . . . . 164
JVD-TX-01. . . . . . . . . . . . . . . . . . . . . . . 122
MIL-SM800P . . . . . . . . . . . . . . . . . . . . . 143
N-FX-MT-02(L) . . . . . . . . . . . . . . . . . . . 139
FPC-SD-LCST-01M . . . . . . . . . . . . . . . . 164
JVD-TX-01(SC) . . . . . . . . . . . . . . . . . . . 122
MIL-SM801G. . . . . . . . . . . . . . . . . . . . . 145
N-FX-MT-02(L)-020. . . . . . . . . . . . . . . . 139
FPC-SD-LCST-02M . . . . . . . . . . . . . . . . 164
JVD-TX-01(SM). . . . . . . . . . . . . . . . . . . 122
MIL-SM801GLX-10 . . . . . . . . . . . . . . . . 145
N-FX-SB201-02 . . . . . . . . . . . . . . . . . . . 139
FPC-SD-LCST-03M . . . . . . . . . . . . . . . . 164
M/E-PSW-FX-01 . . . . . . . . . . . . . . . . . . . 99
MIL-SM801PSC. . . . . . . . . . . . . . . . . . . 144
N-FX-SB201-02(L) . . . . . . . . . . . . . . . . 139
FPC-SD-SCSC-01M . . . . . . . . . . . . . . . . 164
M/E-PSW-FX-01(SC) . . . . . . . . . . . . . . . . 99
MIL-SM801PSC-15 . . . . . . . . . . . . . . . . 144
N-FX-SB202-02 . . . . . . . . . . . . . . . . . . . 139
FPC-SD-SCSC-02M . . . . . . . . . . . . . . . . 164
M/E-PSW-FX-01(SM) . . . . . . . . . . . . . . . 99
MIL-SM801PST. . . . . . . . . . . . . . . . . . . 144
N-FX-SB202-02(L) . . . . . . . . . . . . . . . . 139
FPC-SD-SCSC-03M . . . . . . . . . . . . . . . . 164
M/E-PSW-FX-01(100) . . . . . . . . . . . . . . . 99
MIL-SM802GAF. . . . . . . . . . . . . . . . . . . 148
N-FX-SC-02 . . . . . . . . . . . . . . . . . . . . . . 139
FPC-SD-STSC-01M . . . . . . . . . . . . . . . . 164
M/E-PSW-FX-01(101) . . . . . . . . . . . . . . . 99
MIL-SM808GPSC . . . . . . . . . . . . . . . . . 146
N-FX-SC-02-020 . . . . . . . . . . . . . . . . . . 139
FPC-SD-STSC-02M . . . . . . . . . . . . . . . . 164
MIL-BR500 . . . . . . . . . . . . . . . . . . . . . . 154
MIL-SM808GPSC-15. . . . . . . . . . . . . . . 146
N-FX-SC-02F . . . . . . . . . . . . . . . . . . . . . 139
FPC-SD-STSC-03M . . . . . . . . . . . . . . . . 164
MIL-BRSW . . . . . . . . . . . . . . . . . 154 & 156
MIL-SM808GPSC-60. . . . . . . . . . . . . . . 146
N-FX-SC-02(L) . . . . . . . . . . . . . . . . . . . 139
FPC-SD-STST-01M . . . . . . . . . . . . . . . . 164
MIL-FT240TX . . . . . . . . . . . . . . . . . . . . . 91
MIL-SM808GPST . . . . . . . . . . . . . . . . . 146
N-FX-SC-02(L)-020 . . . . . . . . . . . . . . . . 139
FPC-SD-STST-02M . . . . . . . . . . . . . . . . 164
MIL-GBIC-SX. . . . . . . . . . . . . . . . . . . . . 134
MIL-SM8TXAF2GPA . . . . . . . . . . . . . . . 149
N-FX-SC20-02 . . . . . . . . . . . . . . . . . . . . 139
FPC-SD-STST-03M . . . . . . . . . . . . . . . . 164
MIL-GBIC-LX10 . . . . . . . . . . . . . . . . . . . 134
MP/E-PSW-FX-01 . . . . . . . . . . . . . . . . . . 99
N-FX-SC20-02(L) . . . . . . . . . . . . . . . . . 139
F-SM-MM-02. . . . . . . . . . . . . . . . . . . . . . 85
MIL-L100i . . . . . . . . . . . . . . . . . . . . . . . 163
MP/E-PSW-FX-01(SC). . . . . . . . . . . . . . . 99
N-FX-SC5-02 . . . . . . . . . . . . . . . . . . . . . 139
F-SM-MM-02(LH) . . . . . . . . . . . . . . . . . . 85
MIL-L100s. . . . . . . . . . . . . . . . . . . . . . . 163
MPE-PSW-FX-01(SM) . . . . . . . . . . . . . . . 99
N-FX-SC5-02(L) . . . . . . . . . . . . . . . . . . 139
F-SM-MM-02(LW) . . . . . . . . . . . . . . . . . . 85
MIL-L800i . . . . . . . . . . . . . . . . . . . . . . . 163
MU/E-PSW-FX-01 . . . . . . . . . . . . . . . . . . 99
N-FX-ST-02 . . . . . . . . . . . . . . . . . . . . . . 139
F-SM-MM-02(XL) . . . . . . . . . . . . . . . . . . 85
MIL-LRPC . . . . . . . . . . . . . . . . . . . . . . . 148
MU/E-PSW-FX-01(SC). . . . . . . . . . . . . . . 99
N-FX-ST-02-020 . . . . . . . . . . . . . . . . . . 139
F-SM-MM-05. . . . . . . . . . . . . . . . . . . . . . 79
MIL-M24-02SC . . . . . . . . . . . . . . . . . . . 147
MU/E-PSW-FX-01(SM) . . . . . . . . . . . . . . 99
N-FX-ST-02F . . . . . . . . . . . . . . . . . . . . . 139
F-SM-MM-06. . . . . . . . . . . . . . . . . . . . . 111
MIL-M24-02SC-15 . . . . . . . . . . . . . . . . 147
MU/E-PSW-FX-01(100) . . . . . . . . . . . . . . 99
N-FX-ST-02(L). . . . . . . . . . . . . . . . . . . . 139
F-SM-MM-06(XL) . . . . . . . . . . . . . . . . . 111
MIL-M24-02SC-30 . . . . . . . . . . . . . . . . 147
MU/E-PSW-FX-01(101) . . . . . . . . . . . . . . 99
N-FX-ST-02(L)-020 . . . . . . . . . . . . . . . . 139
J/E-CF-02 . . . . . . . . . . . . . . . . . . . . . . . . 77
MIL-M24-02SC-60 . . . . . . . . . . . . . . . . 147
ND-FX-MT-01 . . . . . . . . . . . . . . . . . . . . 138
N-GLX-LC-01. . . . . . . . . . . . . . . . . . . . . 141
J/E-CF-02(SC) . . . . . . . . . . . . . . . . . . . . . 77
MIL-M24-02ST . . . . . . . . . . . . . . . . . . . 147
ND-FX-SC-01. . . . . . . . . . . . . . . . . . . . . 138
N-GLX-LC-01(L) . . . . . . . . . . . . . . . . . . 141
J/E-CF-02(SM) . . . . . . . . . . . . . . . . . . . . 77
MIL-M24-02T . . . . . . . . . . . . . . . . . . . . 147
ND-FX-ST-01 . . . . . . . . . . . . . . . . . . . . . 138
N-GLX-SC-01. . . . . . . . . . . . . . . . . . . . . 141
J/E-CX-TBT-02. . . . . . . . . . . . . . . . . . . . . 76
MIL-M24-20GB . . . . . . . . . . . . . . . . . . . 147
NDM-FTX-MT-01 . . . . . . . . . . . . . . . . . . 140
N-GLX-SC-01(L) . . . . . . . . . . . . . . . . . . 141
J/E-PSW-FX-02 . . . . . . . . . . . . . . . . . . . . 96
MIL-M24-20SC . . . . . . . . . . . . . . . . . . . 147
NDM-FTX-MT-01-020 . . . . . . . . . . . . . . 140
N-GSX-LC-01. . . . . . . . . . . . . . . . . . . . . 141
J/E-PSW-FX-02(SC) . . . . . . . . . . . . . . . . 96
MIL-M24-20SC-10 . . . . . . . . . . . . . . . . 147
NDM-FTX-MT-01(L) . . . . . . . . . . . . . . . 140
N-GSX-LC-01-020 . . . . . . . . . . . . . . . . . 141
J/E-PSW-FX-02(SM) . . . . . . . . . . . . . . . . 96
MIL-M24-20TC . . . . . . . . . . . . . . . . . . . 147
NDM-FTX-MT-01(L)-020 . . . . . . . . . . . . 140
N-GSX-LC-01(L) . . . . . . . . . . . . . . . . . . 141
J/E-PSW-FX-02(100). . . . . . . . . . . . . . . . 96
MIL-RMS801. . . . . . . . . . . . . . . . . . . . . 156
NDM-FTX-SB201-01 . . . . . . . . . . . . . . . 140
N-GSX-LC-01(L)-020. . . . . . . . . . . . . . . 141
J/E-PSW-FX-02(101). . . . . . . . . . . . . . . . 96
MIL-S1600S . . . . . . . . . . . . . . . . . . . . . 157
NDM-FTX-SB201-01(L). . . . . . . . . . . . . 140
N-GSX-SC-01 . . . . . . . . . . . . . . . . . . . . 141
J/FE-CF-03 . . . . . . . . . . . . . . . . . . . . . . . 83
MIL-S2400S . . . . . . . . . . . . . . . . . . . . . 157
NDM-FTX-SB202-01 . . . . . . . . . . . . . . . 140
N-GSX-SC-01-020 . . . . . . . . . . . . . . . . . 141
J/FE-CF-03(LH) . . . . . . . . . . . . . . . . . . . . 83
MIL-S24T2GPA . . . . . . . . . . . . . . . . . . . 162
NDM-FTX-SB202-01(L). . . . . . . . . . . . . 140
N-GSX-SC-01(L) . . . . . . . . . . . . . . . . . . 141
Call us at 800-526-9267 or 952-941-7600
< 185 >
Table of Contents
Select Media Converter
Select Switch
Product Number Index
Product Number
Page
Product Number
Page
Product Number
Page
Product Number
Page
N-GSX-SC-01(L)-020 . . . . . . . . . . . . . . 141
SAPTF3329-113 . . . . . . . . . . . . . . . . . . 121
SBFTF1018-120 . . . . . . . . . . . . . . . . . . . 94
SEPOE1013-150 . . . . . . . . . . . . . . . . . . . 78
PCM16-FX-LC-01 . . . . . . . . . . . . . . . . . 142
SBFFG1013-100 . . . . . . . . . . . . . . . . . . 101
SBFTF1018-140 . . . . . . . . . . . . . . . . . . . 94
SFBRM1011-100. . . . . . . . . . . . . . . . . . . 88
PCM16-FX-SC-01 . . . . . . . . . . . . . . . . . 142
SBFFG1014-100 . . . . . . . . . . . . . . . . . . 101
SBFTF1019-100 . . . . . . . . . . . . . . . . . . . 93
SFBRM1011-110. . . . . . . . . . . . . . . . . . . 88
PCM16-FX-SC20-01 . . . . . . . . . . . . . . . 142
SBFFG1015-100 . . . . . . . . . . . . . . . . . . 101
SBFTF1029-100 . . . . . . . . . . . . . . . . . . . 93
SFBRM1011-180. . . . . . . . . . . . . . . . . . . 89
PCM16-FX-SC5-01 . . . . . . . . . . . . . . . . 142
SBFFG1017-100 . . . . . . . . . . . . . . . . . . 101
SBFTF1029-101 . . . . . . . . . . . . . . . . . . . 93
SFBRM1011-190. . . . . . . . . . . . . . . . . . . 89
PCM16-FX-ST-01 . . . . . . . . . . . . . . . . . 142
SBFFG1029-100 . . . . . . . . . . . . . . . . . . 101
SBFTF1029-102 . . . . . . . . . . . . . . . . . . . 93
SFBRM1013-100. . . . . . . . . . . . . . . . . . . 88
PCM32-FX-LC-01 . . . . . . . . . . . . . . . . . 142
SBFFG1029-101 . . . . . . . . . . . . . . . . . . 101
SBFTF1029-103 . . . . . . . . . . . . . . . . . . . 93
SFBRM1013-110. . . . . . . . . . . . . . . . . . . 88
PCM32-FX-SC-01 . . . . . . . . . . . . . . . . . 142
SBFFG1029-102 . . . . . . . . . . . . . . . . . . 101
SBFTF1029-104 . . . . . . . . . . . . . . . . . . . 93
SFBRM1013-180. . . . . . . . . . . . . . . . . . . 89
PCM32-FX-SC20-01 . . . . . . . . . . . . . . . 142
SBFFG1029-103 . . . . . . . . . . . . . . . . . . 101
SBFTF1029-105 . . . . . . . . . . . . . . . . . . . 93
SFBRM1013-190. . . . . . . . . . . . . . . . . . . 89
PCM32-FX-SC5-01 . . . . . . . . . . . . . . . . 142
SBFFG1035-100 . . . . . . . . . . . . . . . . . . 101
SBFTF1029-110 . . . . . . . . . . . . . . . . . . . 94
SFBRM1014-100. . . . . . . . . . . . . . . . . . . 88
PCM32-FX-ST-01 . . . . . . . . . . . . . . . . . 142
SBFFG1313-100 . . . . . . . . . . . . . . . . . . 102
SBFTF1029-111 . . . . . . . . . . . . . . . . . . . 94
SFBRM1014-110. . . . . . . . . . . . . . . . . . . 88
RMS19-SA4-01 . . . . . . . . . . . . . . . . . . . . 71
SBFFG1313-110 . . . . . . . . . . . . . . . . . . 102
SBFTF1029-112 . . . . . . . . . . . . . . . . . . . 94
SFBRM1014-180. . . . . . . . . . . . . . . . . . . 89
S4TEF1011-100. . . . . . . . . . . . . . . . . . . 119
SBFFG1314-100 . . . . . . . . . . . . . . . . . . 102
SBFTF1029-113 . . . . . . . . . . . . . . . . . . . 94
SFBRM1014-190. . . . . . . . . . . . . . . . . . . 89
S4TEF1011-110. . . . . . . . . . . . . . . . . . . 120
SBFFG1314-110 . . . . . . . . . . . . . . . . . . 102
SBFTF1029-120 . . . . . . . . . . . . . . . . . . . 94
SFBRM1015-100. . . . . . . . . . . . . . . . . . . 88
S4TEF1013-100. . . . . . . . . . . . . . . . . . . 119
SBFFG1315-100 . . . . . . . . . . . . . . . . . . 102
SBFTF1029-121 . . . . . . . . . . . . . . . . . . . 94
SFBRM1015-180. . . . . . . . . . . . . . . . . . . 89
S4TEF1013-110. . . . . . . . . . . . . . . . . . . 120
SBFFG1315-110 . . . . . . . . . . . . . . . . . . 102
SBFTF1029-122 . . . . . . . . . . . . . . . . . . . 94
SFBRM1016-100. . . . . . . . . . . . . . . . . . . 88
S4TEF1014-100. . . . . . . . . . . . . . . . . . . 119
SBFFG1317-100 . . . . . . . . . . . . . . . . . . 102
SBFTF1029-123 . . . . . . . . . . . . . . . . . . . 94
SFBRM1016-180. . . . . . . . . . . . . . . . . . . 89
S4TEF1014-110. . . . . . . . . . . . . . . . . . . 120
SBFFG1329-100 . . . . . . . . . . . . . . . . . . 102
SBFTF1029-140 . . . . . . . . . . . . . . . . . . . 94
SFBRM1017-100. . . . . . . . . . . . . . . . . . . 88
S4TEF1015-100. . . . . . . . . . . . . . . . . . . 119
SBFFG1329-101 . . . . . . . . . . . . . . . . . . 102
SBFTF1029-141 . . . . . . . . . . . . . . . . . . . 94
SFBRM1017-180. . . . . . . . . . . . . . . . . . . 89
S4TEF1015-110. . . . . . . . . . . . . . . . . . . 120
SBFFG1329-110 . . . . . . . . . . . . . . . . . . 102
SBFTF1029-142 . . . . . . . . . . . . . . . . . . . 94
SFBRM1029-100. . . . . . . . . . . . . . . . . . . 88
S4TEF1016-100. . . . . . . . . . . . . . . . . . . 119
SBFFG1329-111 . . . . . . . . . . . . . . . . . . 102
SBFTF1029-143 . . . . . . . . . . . . . . . . . . . 94
SFBRM1029-101. . . . . . . . . . . . . . . . . . . 88
S4TEF1016-110. . . . . . . . . . . . . . . . . . . 120
SBFFG1335-100 . . . . . . . . . . . . . . . . . . 102
SBFTF1035-100 . . . . . . . . . . . . . . . . . . . 93
SFBRM1029-110. . . . . . . . . . . . . . . . . . . 88
S4TEF1017-100. . . . . . . . . . . . . . . . . . . 119
SBFFG1340-100 . . . . . . . . . . . . . . . . . . 102
SBFTF1039-100 . . . . . . . . . . . . . . . . . . . 93
SFBRM1029-111. . . . . . . . . . . . . . . . . . . 88
S4TEF1017-110. . . . . . . . . . . . . . . . . . . 120
SBFFG3535-100 . . . . . . . . . . . . . . . . . . 102
SCSCF3011-100 . . . . . . . . . . . . . . . . . . 112
SFBRM1029-180. . . . . . . . . . . . . . . . . . . 89
S4TEF1029-100. . . . . . . . . . . . . . . . . . . 119
SBFTF1010-130 . . . . . . . . . . . . . . . . . . . 92
SCSCF3013-100 . . . . . . . . . . . . . . . . . . 112
SFBRM1029-190. . . . . . . . . . . . . . . . . . . 89
S4TEF1029-101. . . . . . . . . . . . . . . . . . . 119
SBFTF1011-100 . . . . . . . . . . . . . . . . . . . 93
SCSCF3014-100 . . . . . . . . . . . . . . . . . . 112
SFBRM1029-181. . . . . . . . . . . . . . . . . . . 89
S4TEF1029-102. . . . . . . . . . . . . . . . . . . 119
SBFTF1011-110 . . . . . . . . . . . . . . . . . . . 94
SCSCF3015-100 . . . . . . . . . . . . . . . . . . 112
SFBRM1029-191. . . . . . . . . . . . . . . . . . . 89
S4TEF1029-103. . . . . . . . . . . . . . . . . . . 119
SBFTF1011-120 . . . . . . . . . . . . . . . . . . . 94
SCSCF3016-100 . . . . . . . . . . . . . . . . . . 112
SFBRM1029-182. . . . . . . . . . . . . . . . . . . 89
S4TEF1029-110. . . . . . . . . . . . . . . . . . . 120
SBFTF1011-140 . . . . . . . . . . . . . . . . . . . 94
SCSCF3017-100 . . . . . . . . . . . . . . . . . . 112
SFBRM1029-183. . . . . . . . . . . . . . . . . . . 89
S4TEF1029-111. . . . . . . . . . . . . . . . . . . 120
SBFTF1013-100 . . . . . . . . . . . . . . . . . . . 93
SCSCF3018-100 . . . . . . . . . . . . . . . . . . 112
SFBRM1035-100. . . . . . . . . . . . . . . . . . . 88
S4TEF1029-112. . . . . . . . . . . . . . . . . . . 120
SBFTF1013-110 . . . . . . . . . . . . . . . . . . . 94
SCSCF3029-100 . . . . . . . . . . . . . . . . . . 112
SFBRM1035-180. . . . . . . . . . . . . . . . . . . 89
S4TEF1029-113. . . . . . . . . . . . . . . . . . . 120
SBFTF1013-120 . . . . . . . . . . . . . . . . . . . 94
SCSCF3029-101 . . . . . . . . . . . . . . . . . . 112
SFBRM1040-100. . . . . . . . . . . . . . . . . . . 88
S4TEF1035-100. . . . . . . . . . . . . . . . . . . 119
SBFTF1013-140 . . . . . . . . . . . . . . . . . . . 94
SCSCF3029-102 . . . . . . . . . . . . . . . . . . 112
SFBRM1040-180. . . . . . . . . . . . . . . . . . . 89
S4TEF1035-110. . . . . . . . . . . . . . . . . . . 120
SBFTF1014-100 . . . . . . . . . . . . . . . . . . . 93
SCSCF3029-103 . . . . . . . . . . . . . . . . . . 112
SFBRM1313-100. . . . . . . . . . . . . . . . . . . 90
SAPTF3311-100 . . . . . . . . . . . . . . . . . . 121
SBFTF1014-110 . . . . . . . . . . . . . . . . . . . 94
SDSFE3110-120 . . . . . . . . . . . . . . . . . . 130
SFBRM1313-110. . . . . . . . . . . . . . . . . . . 90
SAPTF3311-110 . . . . . . . . . . . . . . . . . . 121
SBFTF1014-120 . . . . . . . . . . . . . . . . . . . 94
SDSFE3111-100 . . . . . . . . . . . . . . . . . . 129
SFBRM1314-100. . . . . . . . . . . . . . . . . . . 90
SAPTF3313-100 . . . . . . . . . . . . . . . . . . 121
SBFTF1014-140 . . . . . . . . . . . . . . . . . . . 94
SDSFE3111-120 . . . . . . . . . . . . . . . . . . 130
SFBRM1314-110. . . . . . . . . . . . . . . . . . . 90
SAPTF3313-110 . . . . . . . . . . . . . . . . . . 121
SBFTF1015-100 . . . . . . . . . . . . . . . . . . . 93
SDSFE3113-100 . . . . . . . . . . . . . . . . . . 129
SFBRM1315-100. . . . . . . . . . . . . . . . . . . 90
SAPTF3314-100 . . . . . . . . . . . . . . . . . . 121
SBFTF1015-110 . . . . . . . . . . . . . . . . . . . 94
SDSFE3113-120 . . . . . . . . . . . . . . . . . . 130
SFBRM1315-110. . . . . . . . . . . . . . . . . . . 90
SAPTF3314-110 . . . . . . . . . . . . . . . . . . 121
SBFTF1015-120 . . . . . . . . . . . . . . . . . . . 94
SDSFE3114-100 . . . . . . . . . . . . . . . . . . 129
SFBRM1317-100. . . . . . . . . . . . . . . . . . . 90
SAPTF3315-100 . . . . . . . . . . . . . . . . . . 121
SBFTF1015-140 . . . . . . . . . . . . . . . . . . . 94
SDSFE3114-120 . . . . . . . . . . . . . . . . . . 130
SFBRM1329-100. . . . . . . . . . . . . . . . . . . 90
SAPTF3315-110 . . . . . . . . . . . . . . . . . . 121
SBFTF1016-100 . . . . . . . . . . . . . . . . . . . 93
SDSFE3115-100 . . . . . . . . . . . . . . . . . . 129
SFBRM1329-101. . . . . . . . . . . . . . . . . . . 90
SAPTF3317-100 . . . . . . . . . . . . . . . . . . 121
SBFTF1016-110 . . . . . . . . . . . . . . . . . . . 94
SDSFE3115-120 . . . . . . . . . . . . . . . . . . 130
SFBRM1329-102. . . . . . . . . . . . . . . . . . . 90
SAPTF3317-110 . . . . . . . . . . . . . . . . . . 121
SBFTF1016-120 . . . . . . . . . . . . . . . . . . . 94
SDSFE3117-100 . . . . . . . . . . . . . . . . . . 129
SFBRM1329-103. . . . . . . . . . . . . . . . . . . 90
SAPTF3329-100 . . . . . . . . . . . . . . . . . . 121
SBFTF1016-140 . . . . . . . . . . . . . . . . . . . 94
SDSFE3117-120 . . . . . . . . . . . . . . . . . . 130
SFBRM1329-110. . . . . . . . . . . . . . . . . . . 90
SAPTF3329-101 . . . . . . . . . . . . . . . . . . 121
SBFTF1017-100 . . . . . . . . . . . . . . . . . . . 93
SDSFE3211-110 . . . . . . . . . . . . . . . . . . 131
SFBRM1329-111. . . . . . . . . . . . . . . . . . . 90
SAPTF3329-102 . . . . . . . . . . . . . . . . . . 121
SBFTF1017-110 . . . . . . . . . . . . . . . . . . . 94
SDSFE3213-110 . . . . . . . . . . . . . . . . . . 131
SFBRM1335-100. . . . . . . . . . . . . . . . . . . 90
SAPTF3329-103 . . . . . . . . . . . . . . . . . . 121
SBFTF1017-120 . . . . . . . . . . . . . . . . . . . 94
SDSFE3214-110 . . . . . . . . . . . . . . . . . . 131
SFEPE1011-100 . . . . . . . . . . . . . . . . . . . 86
SAPTF3329-110 . . . . . . . . . . . . . . . . . . 121
SBFTF1017-140 . . . . . . . . . . . . . . . . . . . 94
SDSFE3215-110 . . . . . . . . . . . . . . . . . . 131
SFEPE1011-110 . . . . . . . . . . . . . . . . . . . 86
SAPTF3329-111 . . . . . . . . . . . . . . . . . . 121
SBFTF1018-100 . . . . . . . . . . . . . . . . . . . 93
SDSFE3217-110 . . . . . . . . . . . . . . . . . . 131
SFEPE1013-100 . . . . . . . . . . . . . . . . . . . 86
SAPTF3329-112 . . . . . . . . . . . . . . . . . . 121
SBFTF1018-110 . . . . . . . . . . . . . . . . . . . 94
SEPOE1011-150 . . . . . . . . . . . . . . . . . . . 78
SFEPE1013-110 . . . . . . . . . . . . . . . . . . . 86
< 186 >
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
Product Number Index
Product Number
Page
Product Number
Page
Product Number
Page
Product Number
Page
SFEPE1014-100 . . . . . . . . . . . . . . . . . . . 86
SGETF1029-112 . . . . . . . . . . . . . . . . . . 104
SISTF1014-141-LRT . . . . . . . . . . . . . . . 125
SRMFE1014-200 . . . . . . . . . . . . . . . . . . . 84
SFEPE1014-110 . . . . . . . . . . . . . . . . . . . 86
SGETF1029-113 . . . . . . . . . . . . . . . . . . 104
SISTM1010-180-LR . . . . . . . . . . . . . . . 127
SRMFE1015-200 . . . . . . . . . . . . . . . . . . . 84
SFMFF1313-200 . . . . . . . . . . . . . . . . . . . 85
SGETF1029-116 . . . . . . . . . . . . . . . . . . 104
SISTM1010-180-LRT. . . . . . . . . . . . . . . 127
SRMFE1016-200 . . . . . . . . . . . . . . . . . . . 84
SFMFF1313-220 . . . . . . . . . . . . . . . . . . 106
SGETF1029-117 . . . . . . . . . . . . . . . . . . 104
SISTM1011-162-LR . . . . . . . . . . . . . . . 127
SRMFE1017-200 . . . . . . . . . . . . . . . . . . . 84
SFMFF1314-210 . . . . . . . . . . . . . . . . . . 111
SGETF1035-110 . . . . . . . . . . . . . . . . . . 104
SISTM1011-162-LRT. . . . . . . . . . . . . . . 127
SRMFE1018-200 . . . . . . . . . . . . . . . . . . . 84
SFMFF1314-220 . . . . . . . . . . . . . . . . . . 106
SGETF1039-110 . . . . . . . . . . . . . . . . . . 104
SISTM1013-162-LR . . . . . . . . . . . . . . . 127
SRMFE1029-200 . . . . . . . . . . . . . . . . . . . 84
SFMFF1314-280 . . . . . . . . . . . . . . . . . . 107
SGETF1040-110 . . . . . . . . . . . . . . . . . . 104
SISTM1013-162-LRT. . . . . . . . . . . . . . . 127
SRMFE1029-201 . . . . . . . . . . . . . . . . . . . 84
SFMFF1315-220 . . . . . . . . . . . . . . . . . . 106
SGFEB1013-100 . . . . . . . . . . . . . . . . . . 100
SISTM1014-162-LR . . . . . . . . . . . . . . . 127
SRMFE1029-202 . . . . . . . . . . . . . . . . . . . 84
SFMFF1315-280 . . . . . . . . . . . . . . . . . . 107
SGFEB1014-100 . . . . . . . . . . . . . . . . . . 100
SISTM1014-162-LRT. . . . . . . . . . . . . . . 127
SRMFE1029-203 . . . . . . . . . . . . . . . . . . . 84
SFMFF1316-210 . . . . . . . . . . . . . . . . . . 111
SGFEB1015-100 . . . . . . . . . . . . . . . . . . 100
SMEFG1013-100 . . . . . . . . . . . . . . . . . . 103
SRS2F3111-100 . . . . . . . . . . . . . . . . . . 114
SFMFF1317-210 . . . . . . . . . . . . . . . . . . 111
SGFEB1017-100 . . . . . . . . . . . . . . . . . . 100
SMEFG1013-110 . . . . . . . . . . . . . . . . . . 103
SRS2F3113-100 . . . . . . . . . . . . . . . . . . 114
SFMFF1317-220 . . . . . . . . . . . . . . . . . . 106
SGFEB1024-100 . . . . . . . . . . . . . . . . . . 100
SMEFG1014-100 . . . . . . . . . . . . . . . . . . 103
SRS2F3114-100 . . . . . . . . . . . . . . . . . . 114
SFMFF1317-280 . . . . . . . . . . . . . . . . . . 107
SGFEB1029-100 . . . . . . . . . . . . . . . . . . 100
SMEFG1014-110 . . . . . . . . . . . . . . . . . . 103
SRS2F3115-100 . . . . . . . . . . . . . . . . . . 114
SFMFF1324-220 . . . . . . . . . . . . . . . . . . 106
SGFEB1029-101 . . . . . . . . . . . . . . . . . . 100
SMEFG1015-100 . . . . . . . . . . . . . . . . . . 103
SRS4F3111-100 . . . . . . . . . . . . . . . . . . 116
SFMFF1324-280 . . . . . . . . . . . . . . . . . . 107
SGFEB1029-102 . . . . . . . . . . . . . . . . . . 100
SMEFG1015-110 . . . . . . . . . . . . . . . . . . 103
SRS4F3113-100 . . . . . . . . . . . . . . . . . . 116
SFMFF1329-200 . . . . . . . . . . . . . . . . . . . 85
SGFEB1029-103 . . . . . . . . . . . . . . . . . . 100
SMEFG1017-100 . . . . . . . . . . . . . . . . . . 103
SRS4F3114-100 . . . . . . . . . . . . . . . . . . 116
SFMFF1329-201 . . . . . . . . . . . . . . . . . . . 85
SGFEB1035-100 . . . . . . . . . . . . . . . . . . 100
SMEFG1019-100 . . . . . . . . . . . . . . . . . . 103
SRS4F3115-100 . . . . . . . . . . . . . . . . . . 116
SFMFF1329-202 . . . . . . . . . . . . . . . . . . . 85
SGFEB1040-100 . . . . . . . . . . . . . . . . . . 100
SMEFG1019-110 . . . . . . . . . . . . . . . . . . 103
SRS4F3116-100 . . . . . . . . . . . . . . . . . . 116
SFMFF1329-203 . . . . . . . . . . . . . . . . . . . 85
SIBTF1011-110-MS. . . . . . . . . . . . . . . . 128
SMEFG1029-100 . . . . . . . . . . . . . . . . . . 103
SRS4F3211-100 . . . . . . . . . . . . . . . . . . 116
SFMFF1329-205 . . . . . . . . . . . . . . . . . . . 85
SIBTF1011-110-MR . . . . . . . . . . . . . . . 128
SMEFG1029-101 . . . . . . . . . . . . . . . . . . 103
SRS4F3213-100 . . . . . . . . . . . . . . . . . . 116
SFMFF1329-210 . . . . . . . . . . . . . . . . . . 111
SIBTF1011-130-MS. . . . . . . . . . . . . . . . 128
SMEFG1029-102 . . . . . . . . . . . . . . . . . . 103
SRS4F3214-100 . . . . . . . . . . . . . . . . . . 116
SFMFF1329-211 . . . . . . . . . . . . . . . . . . 111
SIBTF1011-130-MR . . . . . . . . . . . . . . . 128
SMEFG1029-103 . . . . . . . . . . . . . . . . . . 103
SRS4F3215-100 . . . . . . . . . . . . . . . . . . 116
SFMFF1329-220 . . . . . . . . . . . . . . . . . . 106
SIBTF1011-140-MS. . . . . . . . . . . . . . . . 128
SMEFG1029-110 . . . . . . . . . . . . . . . . . . 103
SSDTF1011-105 . . . . . . . . . . . . . . . . . . 117
SFMFF1329-221 . . . . . . . . . . . . . . . . . . 106
SIBTF1011-140-MR . . . . . . . . . . . . . . . 128
SMEFG1029-111 . . . . . . . . . . . . . . . . . . 103
SSDTF1012-105 . . . . . . . . . . . . . . . . . . 117
SFMFF1329-222 . . . . . . . . . . . . . . . . . . 106
SIBTF1013-110-MS. . . . . . . . . . . . . . . . 128
SMEFG1035-100 . . . . . . . . . . . . . . . . . . 103
SSDTF1013-105 . . . . . . . . . . . . . . . . . . 117
SFMFF1329-223 . . . . . . . . . . . . . . . . . . 106
SIBTF1013-110-MR . . . . . . . . . . . . . . . 128
SMEFG1039-100 . . . . . . . . . . . . . . . . . . 103
SSDTF1014-105 . . . . . . . . . . . . . . . . . . 117
SFMFF1329-280 . . . . . . . . . . . . . . . . . . 107
SIBTF1013-130-MS. . . . . . . . . . . . . . . . 128
SMEFG1039-110 . . . . . . . . . . . . . . . . . . 103
SSDTF1015-105 . . . . . . . . . . . . . . . . . . 117
SFMFF1329-281 . . . . . . . . . . . . . . . . . . 107
SIBTF1013-130-MR . . . . . . . . . . . . . . . 128
SMEFG1040-100 . . . . . . . . . . . . . . . . . . 103
SSDTF1016-105 . . . . . . . . . . . . . . . . . . 117
SFMFF1329-282 . . . . . . . . . . . . . . . . . . 107
SIBTF1013-140-MS. . . . . . . . . . . . . . . . 128
SPOEB1011-100 . . . . . . . . . . . . . . . . . . . 97
SSDTF1017-105 . . . . . . . . . . . . . . . . . . 117
SFMFF1329-283 . . . . . . . . . . . . . . . . . . 107
SIBTF1013-140-MR . . . . . . . . . . . . . . . 128
SPOEB1013-100 . . . . . . . . . . . . . . . . . . . 97
SSDTF1018-105 . . . . . . . . . . . . . . . . . . 117
SFMFF1329-286 . . . . . . . . . . . . . . . . . . 107
SIBTF1014-110-MS. . . . . . . . . . . . . . . . 128
SPOEB1014-100 . . . . . . . . . . . . . . . . . . . 97
SSDTF1022-105 . . . . . . . . . . . . . . . . . . 117
SFMFF1329-287 . . . . . . . . . . . . . . . . . . 107
SIBTF1014-110-MR . . . . . . . . . . . . . . . 128
SPOEB1015-100 . . . . . . . . . . . . . . . . . . . 97
SSDTF1027-105 . . . . . . . . . . . . . . . . . . 117
SFMFF1335-220 . . . . . . . . . . . . . . . . . . 106
SIBTF1014-130-MS. . . . . . . . . . . . . . . . 128
SPOEB1016-100 . . . . . . . . . . . . . . . . . . . 97
SSDTF1029-105 . . . . . . . . . . . . . . . . . . 117
SFMFF1335-280 . . . . . . . . . . . . . . . . . . 107
SIBTF1014-130-MR . . . . . . . . . . . . . . . 128
SPOEB1017-100 . . . . . . . . . . . . . . . . . . . 97
SSDTF1029-106 . . . . . . . . . . . . . . . . . . 117
SFMFF1414-220 . . . . . . . . . . . . . . . . . . 106
SIBTF1014-140-MS. . . . . . . . . . . . . . . . 128
SPOEB1029-100 . . . . . . . . . . . . . . . . . . . 97
SSDTF1029-107 . . . . . . . . . . . . . . . . . . 117
SFMFF1414-280 . . . . . . . . . . . . . . . . . . 107
SIBTF1014-140-MR . . . . . . . . . . . . . . . 128
SPOEB1029-101 . . . . . . . . . . . . . . . . . . . 97
SSDTF1029-108 . . . . . . . . . . . . . . . . . . 117
SFMFF1415-200 . . . . . . . . . . . . . . . . . . . 85
SISTF1010-150-LR . . . . . . . . . . . . . . . . 126
SPOEB1035-100 . . . . . . . . . . . . . . . . . . . 97
SSDTF3011-115 . . . . . . . . . . . . . . . . . . 117
SFMFF1417-200 . . . . . . . . . . . . . . . . . . . 85
SISTF1010-150-LRT . . . . . . . . . . . . . . . 126
SPS-1872-CC . . . . . . . . . . . . . . . . . . . . . 72
SSDTF3012-115 . . . . . . . . . . . . . . . . . . 117
SFMFF1424-220 . . . . . . . . . . . . . . . . . . 106
SISTF1010-180-LR . . . . . . . . . . . . . . . . 126
SPS-1872-DPS . . . . . . . . . . . . . . . . . . . . 72
SSDTF3013-115 . . . . . . . . . . . . . . . . . . 117
SFMFF1429-200 . . . . . . . . . . . . . . . . . . . 85
SISTF1010-180-LRT . . . . . . . . . . . . . . . 126
SPS-1872-PS . . . . . . . . . . . . . . . . . . . . . 72
SSDTF3014-115 . . . . . . . . . . . . . . . . . . 117
SFMFF1429-201 . . . . . . . . . . . . . . . . . . . 85
SISTF1011-111-LR . . . . . . . . . . . . . . . . 124
SPS-1872-SA . . . . . . . . . . . . . . . . . . . . . 72
SSDTF3015-115 . . . . . . . . . . . . . . . . . . 117
SFMFF1429-202 . . . . . . . . . . . . . . . . . . . 85
SISTF1011-111-LRT . . . . . . . . . . . . . . . 124
SPSVT2611-100 . . . . . . . . . . . . . . . . . . 113
SSDTF3016-115 . . . . . . . . . . . . . . . . . . 117
SFMFF1429-203 . . . . . . . . . . . . . . . . . . . 85
SISTF1011-141-LR . . . . . . . . . . . . . . . . 125
SPSVT2613-100 . . . . . . . . . . . . . . . . . . 113
SSDTF3017-115 . . . . . . . . . . . . . . . . . . 117
SFMFF4040-100 . . . . . . . . . . . . . . . . . . 109
SISTF1011-141-LRT . . . . . . . . . . . . . . . 125
SPSVT2614-100 . . . . . . . . . . . . . . . . . . 113
SSDTF3018-115 . . . . . . . . . . . . . . . . . . 117
SGETF1013-110 . . . . . . . . . . . . . . . . . . 104
SISTF1013-111-LR . . . . . . . . . . . . . . . . 124
SPSVT2615-100 . . . . . . . . . . . . . . . . . . 113
SSDTF3022-115 . . . . . . . . . . . . . . . . . . 117
SGETF1014-110 . . . . . . . . . . . . . . . . . . 104
SISTF1013-111-LRT . . . . . . . . . . . . . . . 124
SPSVT2629-100 . . . . . . . . . . . . . . . . . . 113
SSDTF3027-115 . . . . . . . . . . . . . . . . . . 117
SGETF1015-110 . . . . . . . . . . . . . . . . . . 104
SISTF1013-141-LR . . . . . . . . . . . . . . . . 125
SPSVT2629-101 . . . . . . . . . . . . . . . . . . 113
SSDTF3029-115 . . . . . . . . . . . . . . . . . . 117
SGETF1017-110 . . . . . . . . . . . . . . . . . . 104
SISTF1013-141-LRT . . . . . . . . . . . . . . . 125
SPSVT2629-102 . . . . . . . . . . . . . . . . . . 113
SSDTF3029-116 . . . . . . . . . . . . . . . . . . 117
SGETF1024-110 . . . . . . . . . . . . . . . . . . 104
SISTF1014-111-LR . . . . . . . . . . . . . . . . 124
SPSVT2629-103 . . . . . . . . . . . . . . . . . . 113
SSDTF3029-117 . . . . . . . . . . . . . . . . . . 117
SGETF1029-110 . . . . . . . . . . . . . . . . . . 104
SISTF1014-111-LRT . . . . . . . . . . . . . . . 124
SRMFE1011-200 . . . . . . . . . . . . . . . . . . . 84
SSDTF3029-118 . . . . . . . . . . . . . . . . . . 117
SGETF1029-111 . . . . . . . . . . . . . . . . . . 104
SISTF1014-141-LR . . . . . . . . . . . . . . . . 125
SRMFE1013-200 . . . . . . . . . . . . . . . . . . . 84
SSEFE1012-100 . . . . . . . . . . . . . . . . . . . 80
Call us at 800-526-9267 or 952-941-7600
< 187 >
Table of Contents
Select Media Converter
Select Switch
Product Number Index
Product Number
Page
Product Number
Page
Product Number
Page
SSEFE1014-100 . . . . . . . . . . . . . . . . . . . 80
TN-SFP-LX8-C61. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C47 . . . . . . . . . . . . . . . 136
SSEFE1015-100 . . . . . . . . . . . . . . . . . . . 80
TN-SFP-OC12M. . . . . . . . . . . . . . . . . . . 135
TN-SFP-OC48S-C49 . . . . . . . . . . . . . . . 136
SSEFE1022-100 . . . . . . . . . . . . . . . . . . . 80
TN-SFP-OC12S . . . . . . . . . . . . . . . . . . . 135
TN-SFP-OC48S-C51 . . . . . . . . . . . . . . . 136
SSEFE1029-100 . . . . . . . . . . . . . . . . . . . 80
TN-SFP-OC12S-C27 . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C53 . . . . . . . . . . . . . . . 136
SSEFE1029-101 . . . . . . . . . . . . . . . . . . . 80
TN-SFP-OC12S-C29 . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C55 . . . . . . . . . . . . . . . 136
SSETF1011-205 . . . . . . . . . . . . . . . . . . . 87
TN-SFP-OC12S-C31 . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C57 . . . . . . . . . . . . . . . 136
SSETF1013-205 . . . . . . . . . . . . . . . . . . . 87
TN-SFP-OC12S-C33 . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C59 . . . . . . . . . . . . . . . 136
SSTM1EOM . . . . . . . . . . . . . . . . . . . . . . 110
TN-SFP-OC12S-C35 . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C61 . . . . . . . . . . . . . . . 136
SSTM1EOS . . . . . . . . . . . . . . . . . . . . . . 110
TN-SFP-OC12S-C37 . . . . . . . . . . . . . . . 136
TN-SFP-SX . . . . . . . . . . . . . . . . . . . . . . 135
SVIDF2011-100. . . . . . . . . . . . . . . . . . . 123
TN-SFP-OC12S-C39 . . . . . . . . . . . . . . . 136
TN-SFP-SXD . . . . . . . . . . . . . . . . . . . . . 135
SVIDF2011-110. . . . . . . . . . . . . . . . . . . 123
TN-SFP-OC12S-C41 . . . . . . . . . . . . . . . 136
WMBD . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
SVIDF2012-100. . . . . . . . . . . . . . . . . . . 123
TN-SFP-OC12S-C43 . . . . . . . . . . . . . . . 136
WMBD-E . . . . . . . . . . . . . . . . . . . . . . . . . 70
SVIDF2012-110. . . . . . . . . . . . . . . . . . . 123
TN-SFP-OC12S-C45 . . . . . . . . . . . . . . . 136
WMBD-F . . . . . . . . . . . . . . . . . . . . . . . . . 70
SVIDF2013-100. . . . . . . . . . . . . . . . . . . 123
TN-SFP-OC12S-C47 . . . . . . . . . . . . . . . 136
WMBD-FS . . . . . . . . . . . . . . . . . . . . . . . . 70
SVIDF2013-110. . . . . . . . . . . . . . . . . . . 123
TN-SFP-OC12S-C49 . . . . . . . . . . . . . . . 136
WMBJ-V . . . . . . . . . . . . . . . . . . . . . . . . . 70
TN-GB-MM5 . . . . . . . . . . . . . . . . . . . . . 134
TN-SFP-OC12S-C51 . . . . . . . . . . . . . . . 136
WMBL . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
TN-GB-SM5 . . . . . . . . . . . . . . . . . . . . . . 134
TN-SFP-OC12S-C53 . . . . . . . . . . . . . . . 136
WMBP . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
TN-GB-SM512 . . . . . . . . . . . . . . . . . . . . 134
TN-SFP-OC12S-C55 . . . . . . . . . . . . . . . 136
WMBS . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
TN-GB-SM53 . . . . . . . . . . . . . . . . . . . . . 134
TN-SFP-OC12S-C57 . . . . . . . . . . . . . . . 136
WMBV . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
TN-GB-SM55 . . . . . . . . . . . . . . . . . . . . . 134
TN-SFP-OC12S-C59 . . . . . . . . . . . . . . . 136
WMBV-E . . . . . . . . . . . . . . . . . . . . . . . . . 70
TN-GB-SM58 . . . . . . . . . . . . . . . . . . . . . 134
TN-SFP-OC12S-C61 . . . . . . . . . . . . . . . 136
TN-SFP-ELX1 . . . . . . . . . . . . . . . . . . . . 135
TN-SFP-OC3M. . . . . . . . . . . . . . . . . . . . 135
TN-SFP-ESX5 . . . . . . . . . . . . . . . . . . . . 135
TN-SFP-OC3S . . . . . . . . . . . . . . . . . . . . 135
TN-SFP-ESX6 . . . . . . . . . . . . . . . . . . . . 135
TN-SFP-OC3S8-C27 . . . . . . . . . . . . . . . 136
TN-SFP-FC2XM . . . . . . . . . . . . . . . . . . . 135
TN-SFP-OC3S8-C29 . . . . . . . . . . . . . . . 136
TN-SFP-FC2XS15 . . . . . . . . . . . . . . . . . 135
TN-SFP-OC3S8-C31 . . . . . . . . . . . . . . . 136
TN-SFP-FC2XS2 . . . . . . . . . . . . . . . . . . 135
TN-SFP-OC3S8-C33 . . . . . . . . . . . . . . . 136
TN-SFP-FC2XS40 . . . . . . . . . . . . . . . . . 135
TN-SFP-OC3S8-C35 . . . . . . . . . . . . . . . 136
TN-SFP-LX1 . . . . . . . . . . . . . . . . . . . . . 135
TN-SFP-OC3S8-C37 . . . . . . . . . . . . . . . 136
TN-SFP-LX12 . . . . . . . . . . . . . . . . . . . . 135
TN-SFP-OC3S8-C39 . . . . . . . . . . . . . . . 136
TN-SFP-LX16 . . . . . . . . . . . . . . . . . . . . 135
TN-SFP-OC3S8-C41 . . . . . . . . . . . . . . . 136
TN-SFP-LX3 . . . . . . . . . . . . . . . . . . . . . 135
TN-SFP-OC3S8-C43 . . . . . . . . . . . . . . . 136
TN-SFP-LX5 . . . . . . . . . . . . . . . . . . . . . 135
TN-SFP-OC3S8-C45 . . . . . . . . . . . . . . . 136
TN-SFP-LX8 . . . . . . . . . . . . . . . . . . . . . 135
TN-SFP-OC3S8-C47 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C27. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC3S8-C49 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C29. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC3S8-C51 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C31. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC3S8-C53 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C33. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC3S8-C55 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C35. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC3S8-C57 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C37. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC3S8-C59 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C39. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC3S8-C61 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C41. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C27 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C43. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C29 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C45. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C31 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C47. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C33 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C49. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C35 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C51. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C37 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C53. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C39 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C55. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C41 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C57. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C43 . . . . . . . . . . . . . . . 136
TN-SFP-LX8-C59. . . . . . . . . . . . . . . . . . 136
TN-SFP-OC48S-C45 . . . . . . . . . . . . . . . 136
< 188 >
Visit our website at www.transition.com
Table of Contents
Select Media Converter
Select Switch
Table of Contents
Select Media Converter
Select Switch
Worldwide Headquarters
6475 City West Parkway
Eden Prairie, MN 55344 USA
tel: 952.941.7600
toll free: 800.526.9267
fax: 952.941.2322
sales@transition.com
info@transition.com
techsupport@transition.com
www.transition.com
West Coast Office
710 Lakeway Drive • Suite 185
Sunnyvale, CA 94085
tel: 408.744.2775
toll free: 800.466.4526
fax: 408.744.2871
Dystrybutor: Meditronik Sp. z o.o.
02-952 Warszawa, ul. Wiertnicza 129, tel. (+48 22) 651-72-42, fax (+48 22) 651-72-46
http://www.meditronik.com.pl
e-mail: office@meditronik.com.pl
North America
Canada - Eastern
tel: +1 603-750-7169
fax: +1 815-360-7401
Canada - Western
tel: +1 425-487-6788
fax: +1 360-234-9170
Eastern Europe
tel: +420 2 2426 6901
fax: +420 2 2426 6854
Latin America
Mexico, Central America, Caribbean
tel: +1 952-996-1517
fax: +1-952-941-2322
South America
tel: +1 727-812-9656
fax: +1 952-941-2322
Brazil
tel: +55 11 8244-7630
Europe
EMEA Headquarters / Germany
tel: +49 611 974 8460
fax: +49 611 950 4672
Eastern & Southern Europe
tel: +420 2 2426 6901
fax: +420 2 2426 6854
Sweden
tel / fax: +46 8-243-454
United Kingdom
tel: +44 (0)1691 830016
fax: +44 (0)1691 830876
Asia
China / Hong Kong
tel: +1 952-941-7600
fax: +1 952-941-2322
P/N 900003
ISO 9001 Quality System Certified in USA
© 2007 Transition Networks, Inc.
All trademarks are the property of their respective owners.
Technical information in this document is subject to
change without notice.
India & Southeast Asia
tel: +65 6288-9810
fax: +65 6234-0564
Japan
tel: +81 03 3357 9980
fax: +81 03 5360 4480
Download PDF
Similar pages