HP ProLiant BL420c Generation 8 (Gen8) Server

QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Overview
Redefining the term "entry-level" in the blade market, the BL420c Gen8 provides breakthrough server blade economics for
essential enterprise workloads.
1. Access panel
7.
2. Cache module connector
3.
4.
5.
6.
Two (2) PCIe 3.0 mezzanine I/O expansion slots
FlexibleLOM Adapter
MicroSDHC card connector
FlexibleLOM connectors (2) supporting one (1)
FlexibleLOM Adapter
Up to two (2) Intel® Xeon® E5-2400v2 or E5-2400 series
processors
8. Internal USB 2.0 connector and Trusted Platform Module
(TPM) connectors
9. HP c-Class Blade SUV (Serial, USB, VGA) connector
10. Two (2) small form factor (SFF) hot-plug drive bays
11. SAS controller
12. Twelve (12) DDR3 DIMM memory slots (6 per processor)
What's New
Support for the Intel® Xeon® processor E5-2400 v2 product family
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 1
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Standard Features
NOTE: This document covers the HP ProLiant BL420c Gen8 server blade only. For information on HP BladeSystems cClass Platinum Enclosures and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the
following:
HP BladeSystem c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs at
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
NOTE: The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c7000 Enclosure QuickSpecs at
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
NOTE: The c7000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c-Class Interconnect and Mezzanine Components at
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
NOTE: For proper BladeSystem operation, the minimum required versions of HP Onboard Administrator and HP Virtual
Connect are required and available via the HP Service Pack for ProLiant, please see http://www.hp.com/go/spp/download.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information Factory Integrated Models" section.
Processor
E5-2400 v2 series Processors
One of the following
Intel® Xeon® E5-2470v2 (2.4GHz/10-core/25MB/95W) Processor
depending on Model
Intel® Xeon® E5-2450v2 (2.5GHz/8-core/20MB/95W) Processor
Intel® Xeon® E5-2440v2 (1.9GHz/8-core/20MB/95W) Processor
Intel® Xeon® E5-2430v2 (2.5GHz/6-core/15MB/80W) Processor
Intel® Xeon® E5-2420v2 (2.2GHz/6-core/15MB/80W) Processor
Intel® Xeon® E5-2407v2 (2.4GHz/4-core/10MB/80W) Processor
Intel® Xeon® E5-2403v2 (1.8GHz/4-core/10MB/80W) Processor
Intel® Xeon® E5-2450Lv2 (1.7GHz/10-core/25MB/60W) Processor
Intel® Xeon® E5-2430Lv2 (2.4GHz/6-core/15MB/60W) Processor
E5-2400 series Processors
Intel® Xeon® E5-2470 (2.3GHz/8-core/20MB/95W) Processor
Intel® Xeon® E5-2450 (2.1GHz/8-core/20MB/95W) Processor
Intel® Xeon® E5-2450L (1.8GHz/8-core/20MB/70W) Processor
Intel® Xeon® E5-2440 (2.4GHz/6-core/15MB/95W) Processor
Intel® Xeon® E5-2430 (2.2GHz/6-core/15MB/95W) Processor
Intel® Xeon® E5-2430L (2.0GHz/6-core/15MB/60W) Processor
Intel® Xeon® E5-2420 (1.9GHz/6-core/15MB/95W) Processor
Intel® Xeon® E5-2407 (2.2GHz/4-core/10MB/80W) Processor
Intel® Xeon® E5-2403 (1.8GHz/4-core/10MB/80W) Processor
NOTE: In a 2 processor configuration, there are twelve (12) total available DIMM slots.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed
may depend on the quantity and type of DIMMs installed.
NOTE: The BL420c Gen8 supports one or two processors.
NOTE: The BL420c Gen8 includes two I/O mezzanine expansion slots. A processor must be
installed in processor slot 1 for access to the first mezzanine expansion slot (expansion slot 1). A
processor must be installed in processor slot 2 for access to the second mezzanine expansion
slot (expansion slot 2).
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 2
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Standard Features
NOTE: All processors within the server must be identical. Mixing different processor models is
not supported.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies
except the E5-2403 and E5-2407.
NOTE: The letter "L" following the model number indicates denotes lower wattage.
NOTE: The processor model as well as the memory configuration determines the maximum
speed memory can operate. Please see the see the "Memory" section later in this document.
Cache Memory
One of the following
depending on Model
25MB shared L3 cache
NOTE: For Ten-core processors.
20MB shared L3 cache
NOTE: For Eight-core processors.
15MB shared L3 cache
NOTE: For Six-core processors.
10MB shared L3 cache
NOTE: For Quad-core processors.
Chipset
Intel® C600 Series Chipset
Intel® E5-2400 Processor Family
NOTE: For more information regarding Intel chipsets, please see the following:
http://www.intel.com/products/server/chipsets/.
Upgradeability
Upgradeable to two (2) processors
NOTE: Processor upgrade available from Intel® Xeon® Processors E5-2400 to E5-2400 v2.
Please contact HP Technology Sales (http://www.hp.com/support), your local HP Re-seller, or
reference the following Customer Advisory: ProLiant Servers-Instructions for Upgrading an HP
ProLiant Gen8 Server from an Intel Xeon Processor E5-2400 to an Intel Xeon Processor E52400v2, regarding critical details before upgrading. An explanation of requirements and
limitations are provided.
On System
HP iLO (Firmware: HP iLO 4)
Management Chipset NOTE: For more information, visit: http://www.hp.com/go/ilo
Memory Protection
Advanced ECC
Memory Online Spare Mode (Rank Spare Mode)
Memory Lockstep Mode
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 3
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Standard Features
Memory
One of the following
depending on Model
Type
HP SmartMemory
DDR3 Load Reduced (LRDIMM), Registered (RDIMM), or Unbuffered
ECC (UDIMM)
Standard (Pre12GB (3 x 4GB) DDR3 1333MHz RDIMMs at 1.35V
configured Models)
24GB (6 x 4GB) DDR3 1600MHz RDIMMs at 1.5V
Maximum (LRDIMM)
384GB (12 x 32GB) up to 1600MHz at 1.5V
Maximum (RDIMM)
192GB (12 x 16GB) up to 1600MHz at 1.5V
192GB (12 x 16GB) up to 1333MHz at 1.35V
Maximum (UDIMM)
96GB (12 x 8GB) up to 1600MHz at 1.5V
96GB (12 x 8GB) up to 1333MHz at 1.35V
NOTE: HP memory from previous generation servers are not qualified or warranted with this
server. HP SmartMemory is required to realize the memory performance improvements and
enhanced functionality listed in this document for Gen8. For additional information, please see
the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be
mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and
LRDIMM.
NOTE: The Intel Xeon E5-2400 Processor Family cannot be configured with the new 1866MHz
HP Smart Memory or the new 1600MHz Low Voltage (1.35v) HP Smart Memory.
NOTE: Depending on the memory configuration and processor model, 1866MHz, 1600MHz and
1333MHz memory may operate at a lower speed. Please see the see the "Memory" section later
in this document and the Online Memory Configuration Tool for details at:
www.hp.com/go/ddr3memory-configurator.
NOTE: The Intel Xeon E5-2400v2 processor architecture supports memory speeds up to
1600MHz. 1866MHz HP Smart Memory will run at 1600MHz.
Network Controller
One of the following
depending on Model
NOTE: Supports one of the following FlexibleLOMs and iLO Management.
One (1) HP FlexFabric 10Gb 2-port 554FLB FlexibleLOM
NOTE: Supports FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI,
iSCSI boot, and autosensing 10Gb/1Gb Ethernet.
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP BladeSystem cClass interconnect components. Both ports will operate at the same speed.
NOTE: FlexFabric capabilities require the use of an HP Virtual Connect FlexFabric module. Fibre
Channel over Ethernet (FCoE) is supported with the HP 10GbE Pass-Thru Module, HP 6120XG
Blade Switch with the CEE license installed, HP Cisco B22HP Fabric Extender and HP Cisco
B22HP Fabric Extender with 16 FET for BladeSystem c-Class. Learn more at
www.hp.com/go/virtualconnect.
One (1) HP Flex-10 10Gb 2-port 530FLB FlexibleLOM
One (1) HP Ethernet 10Gb 2-port 560FLB FlexibleLOM
One (1) HP Ethernet 1Gb 2-port 361FLB FlexibleLOM
NOTE: FlexibleLOMs are not compatible with prior generation c-Class server blades
Standard iLO Network Controller:
One (1) 10/100 Mbps port for the HP iLO 4 On System Management Chipset
One (1) 10/100 Mbps port for the HP iLO 4 to Onboard Administrator link. The Onboard
Administrator (with 10/100/1000 Mbps) to BladeSystem link is 1Gbps.
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 4
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Standard Features
Expansion Slots
Two (2) I/O expansion mezzanine slots:
x8 PCIe 3.0 Type A (supports Type A mezzanine cards) (expansion slot 1).
NOTE: This expansion slot supports dual-port mezzanine cards: one port is routed to
interconnect module bay 3 and the other to bay 4.
x16 PCIe 3.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2).
NOTE: This expansion slot supports dual-port and quad-port mezzanine cards. For dualport cards, one port is routed to interconnect module bay 5 and the other to bay 6. For
quad-port cards, one port is routed to interconnect module bay 5, one to bay 6, one to bay
7, and one to bay 8.
NOTE: A second processor must be installed (in processor slot 2) to have access to the
second expansion slot (expansion slot 2).
Mezzanine card options include:
Dual-port 10Gb FlexFabric,10Gb Flex-10, 10GbE options, and quad-port 1Gb Ethernet
server adapter mezzanine options for additional network ports
Dual-port 8Gb Fibre Channel HBA for SAN connectivity
QDR and FDR InfiniBand for low latency and high bandwidth server interconnectivity
I/O accelerator mezzanine options for high transaction rate local storage
HP Server ROM
HP ROM (read only memory) is now digitally signed using HP's Corporate Signing Service. This
signature is verified before the flash process starts, reducing accidental programming and
preventing malicious efforts to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before
control is passed to the customer-installed operating system. The ROM also provides the
capability of booting from various fixed media (HDD, CD-ROM) and removable media (USB), to
continue operation to the operating system.
HP ROM performs very early configuration of the video controller, to allow monitoring of
initialization progress via an attached monitor. If configuration or hardware errors are discovered
during this early phase of hardware initialization, suitable messages are now displayed on the
connected monitor. Additionally, these configuration or hardware errors are logged to the
Integrated Management Log (IML) to assist in diagnosis.
HP's ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide:
www.hp.com/support/rbsu
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 5
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
QuickSpecs
Standard Features
Storage Controller
One of the following
depending on Model
One (1) HP Smart Array P220i Controller with 512MB FBWC, (RAID 0
and 1)
NOTE: Upgradeable firmware with recovery ROM.
NOTE: The HP Smart Array P220i supports two (2) small form factor
(SFF) hot plug drive bays.
One (1) HP Dynamic Smart Array B320i Controller (SATA RAID 0 and
1 standard; SAS RAID 0 and 1 standard on preconfigured models and
optional with SAS License Key upgrade on Configure-to-Order models)
NOTE: HP Dynamic Smart Array B320i supports two (2) small form
factor (SFF) hot plug drive bays.
NOTE: The server supports up to a combined total of two (2) FBWC
supercap options.
Available Options: Smart Array Advanced Pack Software for enhanced
performance, reliability, availability, and security of system data, SAS
License Key (RAID 0 and 1) and HP 512MB FBWC for B-Series Smart
Array.
Maximum Internal
Storage
Hot Plug SFF SAS
2.4TB
Interfaces
Micro SDHC Slot
Industry Standard
Compliance
ACPI 2.0
Microsoft® Logo certifications
USB 2.0 Support
IPMI 2.0
Secure Digital 2.0
TPM 1.2 Support
IEEE (specific IEEE standards dependent on Ethernet adapter card(s) installed)
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP
SSL 2.0
DMTF Systems Management Architecture for Server Hardware Command Line Protocol
(SMASH CLP)
Active Directory v1.0
PCIe 3.0
2 x 1.2TB
Hot Plug SFF SATA
2.0TB
2 x 1.0TB
Hot Plug SFF SAS SSD 1.6TB
2 x 800GB
Hot Plug SFF SATA
1.6TB
2 x 800GB
SSD
NOTE: The ProLiant BL420c Gen8 server includes the new HP hot plug small form factor (SFF)
SmartDrive carrier for enhanced management and reduced maintenance errors. HP drives from
previous generation servers are not compatible with the ProLiant BL420c Gen8 drive bays.
One (1) internal Micro Secure Digital High Capacity (Micro SDHC) card
slot
USB 2.0 Port
One (1) internal USB 2.0 connector for USB flash media drive keys
NOTE: The above options are for integrated hypervisor virtualization environments needing a
low cost boot solution with the highest performance and reliability.
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 6
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Standard Features
Operating Systems
and Virtualization
Software Support for
ProLiant Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Canonical Ubuntu
Oracle Solaris
VMware
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please visit
our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page
http://www.hp.com/support/BL420cGen8
Enclosures
HP offers two different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16)
ProLiant BL420c Gen8 servers plugged vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to eight (8) HP
ProLiant BL420c Gen8 servers plugged horizontally.
Server blades, storage blades, interconnect modules, power supplies, fans, and redundant
Onboard Administrator modules are all designed to fit into the c3000 and c7000
enclosures.
NOTE: For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html
Graphics
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
Form Factor
HP ProLiant BL420c Gen8 is a half-height server blade that plugs into the HP BladeSystem
c3000 and c7000 enclosures.
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 7
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Standard Features
On System
Management
HP iLO Management
Engine
HP iLO Management Engine is a comprehensive set of embedded
management features supporting the complete lifecycle of the server,
from initial deployment, through ongoing management, to service
alerting and remote support. HP iLO Management Engine comes
standard on all HP ProLiant Gen8 servers. The HP iLO Management
Engine portfolio includes:
HP iLO: The HP iLO (Integrated Lights-Out) management
processor is the core foundation for the HP iLO Management
Engine.
HP Agentless Management: Provides built in server health
monitoring and alerting capability without OS agents, that starts
working the moment a power cord and an Ethernet cable are
connected.
HP Active Health System Always on, continuous monitoring for
increased stability and shorter downtimes; 100% configuration
history; Health and service alerts and easy export and upload to
Service and Support.
HP Intelligent Provisioning: lets customers provision and
configure a single server without any separate media. No more
SmartStart CDs or firmware DVD are needed.
To start Intelligent Provisioning:
Press the F10 key during the ProLiant Gen8 server
boot process (also known as power on self test or
POST).
Please go to the Intelligent Provisioning website at
www.hp.com/go/intelligentprovisioning for additional
information and to view usage videos.
Use the Service Pack for ProLiant (SPP) at
www.hp.com/go/spp to get firmware and software
updates.
HP iLO Mobile App: Enables the ability to access, deploy, and
manage your server anytime from anywhere from select
smartphones and mobile devices. For additional information
please visit: www.hp.com/go/ilo/mobileapp
NOTE: For more information, visit: http://www.hp.com/go/ilo or HP iLO
Management Engine technologies whitepaper
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 8
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Standard Features
HP Insight
HP Service Pack for
management software ProLiant (SPP)
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager
(HP SUM) provide a comprehensive approach to firmware and system
software maintenance. Together they provide better operating stability
and ensure maximum uptime. The SPP will be updated at a predictable
cadence, typically coinciding with new HP server hardware launches.
By enabling firmware to be updated online and integrating firmware and
system software updates in one operation, HP SUM and the SPP offer
faster updates of individual servers and dramatically faster updates of
entire BladeSystem enclosures. Further improving system uptime and
stability is the fact that HP provides 12 months of support for each
Service Pack for ProLiant release.
The user experience around HP SUM and the SPP has been improved
in several ways, starting with the web download. A single web page
provides access to a single download containing both the latest version
of HP SUM and the latest SPP. Optional smaller subsets with only
specific types of servers or specific operating systems are offered to
save on download time. The HP SUM application provides a
straightforward, intuitive user interface that guides the user through the
steps of discovery, analyses and update, providing comprehensive
information on available updates, criticality and interdependencies.
This information is also available in reports. By providing the option of
multiple local or shared repositories which can be easily updated from
hp.com, HP SUM provides the tools to optimize stability and
consistency throughout the company. While HP SUM and the SPP
recommend the combinations of firmware and system software that HP
has found to be the best practice, the application gives customers the
flexibility to set their own specific baseline.
The Service Pack for ProLiant has been rigorously tested with specific
attention for interaction between firmware, drivers and agents both
within the server as well as in interaction with the BladeSystem
enclosure components (Onboard Administrator and Virtual Connect).
This testing ensures the highest quality as well as providing the input
for HP SUM to deploy updates taking into account all
interdependencies, when determining the correct updates and order of
update deployment.
NOTE: The Service Pack for ProLiant (which includes HP SUM) can be
downloaded from www.hp.com/go/spp/download. More information can
be found: http://www.hp.com/go/SmartUpdate, www.hp.com/go/spp and
http://www.hp.com/go/hpsum
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 9
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Standard Features
Security
Availability
Power-on password
Administrator's password
Keyboard password (QuickLock)
HP iLO 4 On System Management Chipset with:
SSL encryption
Secure Shell version 2
Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES)
on browser, CLP and XML scripting interface
AES and RC4 encryption of video
External USB port enable/disable
Serial interface control
TPM (Trusted Platform Module) 1.2 option
Advanced Encryption Standard (AES)
Intel® Advanced Encryption Standard-New Instructions (AES-NI)
Memory
Advanced ECC uses single device data correction (SDDC) to detect and correct single
and all multi-bit error that occurs within a single DRAM chip. Both x4 and x8 SDDC are
supported (x8 requires lockstep mode).
Memory online spare mode (also known as rank spare mode) detects a rank that is
degrading and switches operation to the spare rank.
Memory Lockstep mode is used to correct a single x8 DRAM device failure on a DIMM.
The DIMMs in each paired memory channel must have identical HP part numbers.
Memory demand and patrol scrubbing to prevent accumulation of correctable errors and
reducing the likelihood of unplanned downtime.
Failed DIMM isolation improves the service time thus improving the overall system
availability.
Address parity protection available on RDIMMs and LRDIMMs detects address bit errors
improving service time and overall system availability.
Mezzanine options and I/O
Support for one (1) FlexibleLOM, providing two (2) (i.e. redundant) Ethernet ports
Multiple mezzanine I/O expansion slots that support a wide variety of mezzanine cards
each supporting multiple data paths routed to redundant interconnect modules.
Network Adapter Teaming (bonding) provides network fault tolerance, transmit load
balancing, and switch-assisted load balancing.
Storage
Two (2) Small Form Factor hot-plug SAS/SATA/SSD drive bays.
Choice of SAS controller:
HP Smart Array P220i Controller with 512MB FBWC, RAID 0 and 1 support, and
upgradeable firmware with recovery ROM capability.
HP Dynamic Smart Array B320i controller with optional 512MB FBWC upgrade
and/or SAS license upgrade for RAID 0 and 1 support (SAS license comes standard
on pre-configured models and comes as an upgrade option when selecting
Configure-to-Order models).
Optional HP D2200sb Storage Blade for direct attached and shared storage within the cClass enclosure.
Optional dual-port Fibre Channel mezzanine cards for redundant SAN connections.
Processor/Chipset
Processor internal sensors & thermal control protection against over-temperature
conditions.
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 10
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Standard Features
Cache parity/ECC protects cache data from accidental data corruption.
Machine Check Architecture (MCA) detects and captures hardware errors such as system
bus, memory ECC, parity, and cache, and improves service time.
Intel® QPI Protocol Protection allows detection of data errors using a checksum of 8-bits.
Core Disable for FRB (fault resilient boot) allows a system to power-on despite a failing
core-pair. It uses BIST (built-in self test) results to detect a failure and disables the target
core-pair upon subsequent boot.
Server Blade Enclosure Infrastructure
Pooled power for true N+N power redundancy through up to six (6) hot-plug, highefficiency, enclosure-based power supplies (configuration dependent).
Up to ten (10) redundant enclosure-based hot-plug HP Active Cool fans that scale to meet
future demands and optimize airflow, reduce power draw, and improve acoustic
performance.
Dual grid power providing redundant rack enclosure power feeds to the server blade
enclosure.
HP Dynamic Power Saver Mode the total enclosure power consumption is monitored in
real time and automatically adjusted with changes in demand for improved efficiency and
reliability.
HP Dynamic Power Capping safely limits power usage without impacting performance by
capping peak instead of average power usage, removes risk to electrical infrastructure
with fast-acting, hardware-based capping algorithm, and reclaims more power by
dynamically controlling power limits based on workload demand.
Up to eight interconnect modules per server blade enclosure providing four simultaneous
redundant fabrics for FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand,
iSCSI, etc.
Enclosure crosslinks between adjacent to provide interconnect module-to-module
connections or as Virtual Connect module stacking links.
Optional enclosure redundant Onboard Administrator system management module.
Warranty
This product is covered by a global limited warranty and supported by HP Services and a
worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair
is available for three years from date of purchase. Support for software and initial setup is
available for 90 days from date of purchase. Enhancements to warranty services are available
through HP Care Pack services or customized service agreements. Certain restrictions and
exclusions apply. Hard drives have either a one year or three year warranty; refer to specific hard
drive QuickSpecs for details.
NOTE: Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support. Warranty
repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts
fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and
labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional
CSR parts are also designed for easy replacement but may involve added complexity.
Customers may choose to have HP replace Optional CSR parts at no charge. Additional
information regarding worldwide limited warranty and technical support is available at
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 11
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Optional Features
Fibre Channel Support Up to two (2) optional Fibre Channel mezzanine HBAs are supported on the HP ProLiant BL420c
Gen8.
Compatible SAN
HP ProLiant BL420c Gen8 server blades are optimized for HP MSA, EVA and XP.
HP ProLiant BL420c Gen8 server blades are compatible with select 3rd party SANs. Please see
blade storage page for more details at:
http://h18004.www1.hp.com/products/blades/components/c-class-sans.html.
HP Virtual Connect
HP Virtual Connect is an interconnect option for BladeSystem c-Class that simplifies server
connectivity to data and storage networks, and reduces costs. Unique HP Flex-10 technology
makes maximum use of network bandwidths, provide dynamic tuning and enable extreme
flexibility to meet individual server and infrastructure requirements by allocating up to 4 network
connections per server port. Virtual Connect FlexFabric modules extend those capabilities to
allocate one function per port to storage connections. HP Virtual Connect Enterprise Manager
(VCEM) provides server management software with a central console to administer network
connections and workloads for thousands of servers. For more information on Virtual Connect
Enterprise Manager, see http://www.hp.com/go/vcem. For more information on Virtual Connect
Ethernet, Fibre Channel, Converged Network and management options, see
http://www.hp.com/go/virtualconnect.
HP Insight
HP Insight Control
management software
HP Matrix Operating
Environment
HP iLO Scale-Out
HP iLO Advanced
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, migrate, monitor, remote control, and optimize your IT
infrastructure through a single, simple management console. For more
information about this service, see http://www.hp.com/services/insight.
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff
and proactive delivery of software updates.
The HP Matrix Operating Environment (Matrix OE) for ProLiant and
Integrity servers is an integrated command center that helps you
instantly adjust to dynamic business demands. This advanced
infrastructure management software lets you reduce the cost of
common data center tasks by up to 40 percent while keeping pace with
your changing business.
The HP Matrix OE includes the automated provisioning, optimization,
and recovery management capabilities for HP CloudSystem Matrix, the
ideal platform for private cloud and Infrastructure as a Service (IaaS).
For more information, see http://www.hp.com/go/matrixoe.
The HP iLO Scale-Out license ideal for web/hosting/cloud service
providers and High Performance Computing environments. This
license is a specific subset of iLO Advanced functionality, provides fast
remote access through Text Console via SSH, lower operational cost
with Dynamic power capping, and faster time to resolution through
Email-based Alerting and proactive notifications. With this newly
designed HP iLO Scale-Out HPC customers now have a server
management package solely design and priced for their massive data
environments. HP iLO Scale-Out is available on all HP ProLiant Gen8
BL and SL platforms. For more information, see:
http://www.hp.com/go/iLO/scale-out
HP Integrated Lights-Out Advanced License a product option,
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 12
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Optional Features
providing smart remote server management without compromise. iLO
Advanced unlocks the full set of remote administration functionality for
all HP ProLiant servers by activating the full Virtual Keyboard Video
and Mouse remote console, multi-user collaboration, console record
and replay, GUI-based and scripted virtual media and virtual folders,
and enhanced security and power management functionality. For more
information, see: http://www.hp.com/go/iloadvance
HP OneView
The HP OneView architecture combines server, storage, and networking with control of
datacenter environmentals into a single, integrated management platform. Architected to deliver
lifecycle management for the complete Converged Infrastructure, it facilitates collaboration,
removes friction, collapses cycle times, eliminates error-prone work, and accelerates time to
value. HP OneView v1.0 combines management of servers and virtual connect with open
integration to automate and customize existing tools and processes. With OneView, you'll work
smarter-with greater visibility and control-and fully capitalize on the benefits of a Converged
Infrastructure.
For more information on HP OneView management, see: http://www.hp.com/go/oneview.
High Performance
Clusters
HP Cluster Platforms
HP HPC Interconnects
HP Insight Cluster
Management Utility
HP Cluster Platforms are specifically engineered, factory-integrated
large-scale ProLiant clusters optimized for High Performance
Computing, with a choice of servers, networks and software. Operating
system options include specially priced offerings for Red Hat Enterprise
Linux and SUSE Linux Enterprise Server, as well as Microsoft
Windows HPC Server. A Cluster Platform Configurator simplifies
ordering. http://www.hp.com/go/clusters
High Performance Computing (HPC) interconnect technologies are
available for this server as part of the HP Cluster Platform portfolio.
These high-speed InfiniBand and Gigabit interconnects are fully
supported by HP when integrated within an HP cluster. Flexible,
validated solutions can be defined with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP Insight Cluster Management Utility (CMU) is an HP-licensed and
HP-supported suite of tools that are used for lifecycle management of
hyperscale clusters of Linux ProLiant systems. CMU includes software
for the centralized provisioning, management and monitoring of nodes.
CMU makes the administration of clusters user friendly, efficient, and
effective. http://www.hp.com/go/cmu
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 13
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Optional Features
Storage Software
Whether you need to solve a specific data protection, archiving, or storage command and control
challenge, or deliver on strategic consolidation, compliance, or continuity initiatives, look no
further than HP storage software. Our storage software helps you reduce costs, simplify storage
infrastructure, protect vital assets and respond faster to business opportunities.
Storage software that gets the job done:
Data Protection and Recovery Software
Whether you're a large enterprise or a smaller business, HP data protection and recovery
software will cost-effectively protect you against disaster and ensure business continuity.
Data Archive and Migration Software
HP's storage software enables you to comply with data retention and retrieval
requirements, improve application performance, and reduce costs by efficiently migrating
infrequently accessed or less valuable data to lower cost storage.
Storage Resource Management Software (SRM)
HP's storage resource management software reduces operational costs and provides the
command and control foundation you need to efficiently manage and visualize your
physical and virtual environments.
Data Replication Software
HP offers array-based and host-based replication software for use in disaster recovery,
testing, application development and reporting.
Storage Device Management Software
Maximize your investment in HP storage and networking with software that enables
hardware-specific configuration, performance tuning and connectivity management.
HP StoreVirtual VSA
HP StoreVirtual VSA allows you to create fully featured shared storage on a VMware vSphere or
Microsoft Hyper-V virtualized server. This server model starting November 2013, includes a
limited license for HP StoreVirtual VSA software with 1TB of capacity. To download the license
key and StoreVirtual VSA software, visit www.hp.com/go/unlockVSA.
NOTE: You will need your server serial number in order to complete the registration form. Fully
functional, capacity-based licenses are available in 4TB, 10T and 50TB sizes. For more
information and access to the 60-day free trial, visit: www.hp.com/go/tryVSA
HP Insight Online
HP Insight Online is a new addition to the HP Support Center for one stop, secure access to
product and HP support information personalized to your IT environment. Insight Online can
automatically display devices remotely monitored by HP Insight Remote Support. With Insight
Online's easy navigation you can efficiently track your IT support contracts and device status
from anywhere and at anytime. http://www.hp.com/go/insightonline
HP Proactive Insight
experience
Prevent problems with innovative, automated monitoring tools and proactive services. The HP
Proactive Insight experience consist of using Insight Online, Insight Remote Support, and
Proactive Care Support Service as one integrated solution. The Proactive Insight experience
provides you with expert advice and personalized, cloud-based automated IT support, helping to
prevent unplanned down time and solve problems quickly. For more information, visit:
www.hp.com/go/proactiveinsightexperience
Expansion Blade
Support
Supports one (1) optional storage, tape, or PCI expansion blade.
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 14
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Optional Features
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include a
wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape
libraries and configurable network switches.
For more information on Factory Express services on your specific server model please contact
your sales representative or go to: http://www.hp.com/go/factory-express.html
HP Simple
Configurator
SCE is a guided self service tool to help sales and non technical people provide customers with
initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration
help, or use in your existing ordering processes. If you require "custom" rack configuration or
configuration for products not available in SCE, please contact HP's Customer Business Center
or an Authorized Partner for assistance. http://www.hp.com/products/configurator
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 15
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Service and Support
Service and Support
HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner
who understands your increasingly complex business technology environment. That's why it
makes sense to team up with the people who know HP infrastructure hardware and software
best - the experienced professionals at HP Services.
Protect your business beyond warranty with HP Care Pack Services
HP Care Pack services offer complete care and support expertise with committed response
choices designed to meet your IT and business needs.
HP Foundation Care services offer scalable reactive support-packages for HP industry-standard
servers and software. You can choose the type and level of service that is most suitable for your
IT and business needs. HP Proactive Care delivers high levels of system availability through
proactive service management and advanced technical response.
Recommended HP Care Pack Services for your HP product
Optimized Care
3-Year HP 6 hour Call to Repair Response, Proactive Care
Combined reactive and proactive support for hardware and software helping optimize your
systems and delivering high levels of availability through proactive service management and
advanced technical response. Hardware problem resolution to return the hardware in operating
condition within 6 hours of the initial service request. A Technical Account Manager, as your
single point of contact, will own your call or issue end to end until resolved.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf
HP Install c-Class Server Blade Service
This easy-to-buy, easy-to-use HP Care Pack service helps ensure that your new HP hardware is
installed smoothly, efficiently, and with minimal disruption of your IT and business operations.
Standard Care
3-Year HP 24x7 4 hour response, Proactive Care Service
This service gives you combined reactive and proactive support including rapid access to our
Advanced Solution Center to manage and prevent problems and a Technical Support Specialist
with a broad level of technical knowledge that will engage with additional technical expertise as
needed from HP's vast global resources.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf
HP Install c-Class Server Blade Service
This easy-to-buy, easy-to-use HP Care Pack service helps ensure that your new HP hardware is
installed smoothly, efficiently, and with minimal disruption of your IT and business operations.
Related Services
HP Proactive Care Personalized Support - Environmental Option
The Personalized Support option provides an assigned Account Support Manager who can bring
best practices from across the industry plus extra technical skills to your IT team. This option is
only available as an add-on to HP Proactive Care Support.
HP Proactive Select Service
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You
can buy Proactive Select Service Credits when you purchase your hardware and then use the
credits over the next 12 months. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA23842ENN.pdf
Additional HP Care Pack services can be found at:
http://www.hp.com/go/cpc
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 16
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Service and Support
Insight Online/Insight HP Insight Remote Support provides 24 X 7 remote monitoring, proactive notifications, and
Remote Support
problem resolution. This comes at no additional cost with your HP solution. Learn more about
Insight Remote Support http://www.hp.com/go/insightremotesupport and Insight Online
http://www.hp.com/go/insightonline
NOTE: Insight Remote Support is a prerequisite for Proactive Care. All blades within a single HP
BladeSystem enclosure must be at the same service level.
HP Support Center
Personalized online support portal with access to information, tools and experts to support HP
business products. Submit support cases online, chat with HP experts, access support
resources or collaborate with peers. Learn more http://www.hp.com/go/hpsc
HP's Support Center Mobile App allows you to resolve issues yourself or quickly connect to an
agent for live support. Now, you can get access to personalized IT support anywhere, anytime.
HP Insight Remote Support and HP Support Center are available at no additional cost with a HP
warranty, HP Care Pack or HP contractual support agreement.
NOTE: HP Support Center Mobile App is subject to local availability.
Parts and Materials
HP will provide HP-supported replacement parts and materials necessary to maintain the
covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the
maximum usage limitations as set forth in the manufacturer's operating manual, product
quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as
part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash
Drives replaced by HP due to malfunction.
For more information To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP
sales representative or HP Authorized ServiceOne Channel Partner. Or visit:
www.hp.com/services/bladesystem
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 17
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Preconfigured Models
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
E5-2400 series Processors
HP ProLiant BL420c
Processor(s)
(2) Intel® Xeon® E5-2450 (2.1GHz/8-core/20MB/95W)
Gen8 E5-2450 2P
Cache Memory
20MB L3 Cache
24GB-R P220i SFF
Memory
24GB (6 x 4GB-R DDR3-1600)
Server
NOTE: Total of 12 DIMM slots.
668356-B21
Network Controller
One (1) HP FlexFabric 10Gb 2-port 554FLB FlexibleLOM
Storage Controller
HP Smart Array P220i Controller with 512MB FBWC RAID 0,1
Hard Drive
None Ship Standard
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD drives
Internal Storage
SAS: 2.4TB; SATA: 2.0TB; SAS SSD: 1.6TB; SATA SSD: 1.6TB
Optical Drive Bay
None
Expansion Slots
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports
Type A and Type B mezzanine cards.
Management
HP iLO Management Engine (standard)
Optional: HP iLO Scale-Out or HP Insight Control
Form Factor
Warranty
HP ProLiant BL420c
Gen8 E5-2450L 1P
12GB-R B320i SFF
Server
668358-B21
Processor(s)
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
Up to eight (8) half-height blades supported in the HP BladeSystem
c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem
c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site
support.
(1) Intel® Xeon® E5-2450L (1.8GHz/8-core/20MB/70W)
20MB Level 3 cache
12GB (3 x 4GB-R DDR3-1333)
NOTE: Total of 12 DIMM slots.
One (1) HP Ethernet 1Gb 2-port 361FLB FlexibleLOM
HP Dynamic Smart Array B320i Controller with SAS license key RAID
0,1
None Ship Standard
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD drives
SAS: 2.4TB; SATA: 2.0TB; SAS SSD: 1.6TB; SATA SSD: 1.6TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports
Type A and Type B mezzanine cards.
HP iLO Management Engine (standard)
Optional: HP iLO Scale-Out or HP Insight Control
Up to eight (8) half-height blades supported in the HP BladeSystem
c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem
c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site
support.
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 18
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Preconfigured Models
HP ProLiant BL420c
Gen8 E5-2430 1P
12GB-R B320i SFF
Server
668357-B21
Processor(s)
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
HP ProLiant BL420c
Gen8 E5-2403 1P
12GB-R B320i SFF
Server
668359-B21
Processor(s)
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
(1) Intel® Xeon® E5-2430 (2.2GHz/6-core/15MB/95W)
15MB Level 3 cache
12GB (3 x 4GB-R DDR3-1333)
NOTE: Total of 12 DIMM slots.
One (1) HP Ethernet 1Gb 2-port 361FLB FlexibleLOM
HP Dynamic Smart Array B320i Controller with SAS license key RAID
0,1
None Ship Standard
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD drives
SAS: 2.4TB; SATA: 2.0TB; SAS SSD: 1.6TB; SATA SSD: 1.6TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports
Type A and Type B mezzanine cards.
HP iLO Management Engine (standard)
Optional: HP iLO Scale-Out or HP Insight Control
Up to eight (8) half-height blades supported in the HP BladeSystem
c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem
c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site
support.
(1) Intel® Xeon® E5-2403 (1.8GHz/4-core/10MB/80W)
10MB Level 3 cache
12GB (3 x 4GB-R DDR3-1333)
NOTE: Total of 12 DIMM slots.
One (1) HP Ethernet 1Gb 2-port 361FLB FlexibleLOM
HP Dynamic Smart Array B320i Controller with SAS license key RAID
0,1
None Ship Standard
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD drives
SAS: 2.4TB; SATA: 2.0TB; SAS SSD: 1.6TB; SATA SSD: 1.6TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports
Type A and Type B mezzanine cards.
HP iLO Management Engine (standard)
Optional: HP iLO Scale-Out or HP Insight Control
Up to eight (8) half-height blades supported in the HP BladeSystem
c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem
c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site
support.
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 19
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model (configure-to-order or CTO
server). To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact
your local sales representative for information on CTO product offerings and requirements.
NOTE: Configure-to-order server blades must start with a CTO Blade Server.
NOTE: FIO indicates that this option is only available as a factory installable option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
HP Models
HP ProLiant BL420c Gen8 10Gb FlexibleLOM Configure-to-order Blade Server
Configurable Model ships with:
One (1) FlexibleLOM connector providing a choice of one (1) of the supported
10Gb FlexibleLOMs (see Step 2)
One (1) SAS controller connector providing a choice of one (1) of the supported
SAS controllers (see step 2)
Two (2) HP small form factor hot-plug SAS/SATA/SSD hard drive bays
One (1) x8 PCIe 3.0 I/O expansion slot (Type A)
One (1) x16 PCIe 3.0 I/O expansion slot (Type B)
One (1) integrated USB connector and one (1) Micro SDHC connector
One (1) TPM connector
HP iLO Management Engine (standard)
640996-B21
HP ProLiant BL420c Gen8 1Gb FlexibleLOM Configure-to-order Blade Server
Configurable Model ships with:
One (1) FlexibleLOM connector providing a choice of one (1) of the supported
1Gb FlexibleLOMs (see Step 2)
One (1) SAS controller connector providing a choice of one (1) of the supported
SAS controllers (see step 2)
Two (2) HP small form factor hot-plug SAS/SATA/SSD hard drive bays
One (1) x8 PCIe 3.0 I/O expansion slot (Type A)
One (1) x16 PCIe 3.0 I/O expansion slot (Type B)
One (1) integrated USB connector and one (1) Micro SDHC connector
One (1) TPM connector
HP iLO Management Engine (standard)
690142-B21
Step 2: Choose Required Options (one of the following from each list unless
otherwise noted)
HP Processors
For single processor configuration choose:
Core Processor Option Kits
NOTE: All configure-to-order processor kits (i.e. xxxxxx-L21) contain one (1)
processor.
NOTE: If two processors are desired, select one xxxxxx-L21 here in Step 2 and
one xxxxxx-B21 in Step 4.
E5-2400 v2 series Processors
HP BL420c Gen8 Intel® Xeon® E5-2470v2 (2.4GHz/10-core/25MB/95W) FIO
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2450v2 (2.5GHz/8-core/20MB/95W) FIO
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2440v2 (1.9GHz/8-core/20MB/95W) FIO
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2430 v2 (2.5GHz/6-core/15MB/80W) FIO
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2420v2 (2.2GHz/6-core/15MB/80W) FIO
Processor Kit
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
724181-L21
724182-L21
724183-L21
724184-L21
724185-L21
Page 20
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Configuration Information - Factory Integrated Models
HP BL420c Gen8 Intel® Xeon® E5-2407v2 (2.4GHz/4-core/10MB/80W) FIO
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2403v2 (1.8GHz/4-core/10MB/80W) FIO
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2450Lv2 (1.7GHz/10-core/25MB/60W) FIO
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2430Lv2 (2.4GHz/6-core/15MB/60W) FIO
Processor Kit
E5-2400 series Processors
HP BL420c Gen8 Intel® Xeon® E5-2470 (2.3GHz/8-core/20MB/95W) FIO
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2450 (2.1GHz/8-core/20MB/95W) FIO
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2450L (1.8GHz/8-core/20MB/70W) FIO
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2440 (2.4GHz/6-core/15MB/95W) FIO
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2430 (2.2GHz/6-core/15MB/95W) FIO
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2430L (2.0GHz/6-core/15MB/60W) FIO
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2420 (1.9GHz/6-core/15MB/95W) FIO
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2407 (2.2GHz/4-core/10MB/80W) FIO
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2403 (1.8GHz/4-core/10MB/80W) FIO
Processor Kit
NOTE: In a 2 processor configuration, there are twelve (12) total available DIMM
slots.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual
memory speed may depend on the quantity and type of DIMMs installed.
NOTE: The BL420c Gen8 supports one or two processors.
NOTE: The BL420c Gen8 includes two I/O mezzanine expansion slots. A
processor must be installed in processor slot 1 for access to the first mezzanine
expansion slot (expansion slot 1). A processor must be installed in processor
slot 2 for access to the second mezzanine expansion slot (expansion slot 2).
NOTE: All processors within the server must be identical. Mixing different
processor models is not supported.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost
Technologies except the E5-2403 and E5-2407.
NOTE: The letter "L" following the model number indicates denotes lower
wattage.
NOTE: The processor model as well as the memory configuration determines
the maximum speed memory can operate. Please see the see the "Memory"
section later in this document.
HP Memory
724188-L21
724189-L21
724190-L21
724191-L21
667372-L21
667373-L21
667423-L21
667374-L21
667375-L21
667424-L21
667376-L21
667421-L21
667422-L21
NOTE: HP memory from previous generation servers are not qualified or
warranted with this HP ProLiant BL420c Server. HP SmartMemory is required to
realize the memory performance improvements and enhanced functionality listed
in this document for Gen8. For additional information, please see the HP
SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 21
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Configuration Information - Factory Integrated Models
cannot be mixed within a server. The majority of ProLiant Gen8 servers support
RDIMM, UDIMM and LRDIMM.
NOTE: A minimum of one DIMM is required per server.
NOTE: For additional memory rules and guidelines, see the "Memory" section
later in this document.
HP SmartMemory
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series Processors.
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS11 Low Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS11 Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11
Low Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS11 Low Voltage Memory Kit
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9
Low Voltage Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS9 Low Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS11 Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series Processors.
HP 2GB (1x2GB) Single Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS11 Low Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS-11
Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS-11
Low Voltage Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS11 Memory Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS9 Low Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
713981-B21
731765-B21
713983-B21
713985-B21
647893-B21
647895-B21
647897-B21
647899-B21
690802-B21
647901-B21
672631-B21
713975-B21
713977-B21
713979-B21
669320-B21
647905-B21
669322-B21
647907-B21
669324-B21
Page 22
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Configuration Information - Factory Integrated Models
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series Processors.
HP 32GB (1x32GB) Quad Rank x4 PC3-14900L (DDR3-1866) Load Reduced
CAS-13 Memory Kit
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced
CAS-9 Low Voltage Memory Kit
NOTE: Depending on the memory configuration and processor model, 1866MHz,
1600MHz and 1333MHz memory may operate at a lower speed. Please see the
see the "Memory" section later in this document and the Online Memory
Configuration Tool for details at: www.hp.com/go/ddr3memory-configurator.
HP Networking
FlexibleLOM Adapters
NOTE: The server requires one (1) FlexibleLOM that is installed in the
FlexibleLOM connectors. All FlexibleLOMs are dual port: One port is routed to
interconnect module bay 1 and the other to bay 2.
10Gb FlexibleLOM Adapters
HP Ethernet 10Gb 2-port 560FLB FIO Adapter
HP FlexFabric 10Gb 2-port 554FLB FIO Adapter
HP FlexFabric 10Gb 2-port 534FLB FIO Adapter
HP Flex-10 10Gb 2-port 530FLB FIO Adapter
NOTE: HP ProLiant BL420c Gen8 10Gb FlexibleLOM Configure-to-order Blade
Server (640996-B21) must be selected in order to select one of the 10Gb
FlexibleLOM Adapters
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: www.hp.com/go/ProLiantNICs
1Gb FlexibleLOM Adapters
HP Ethernet 1Gb 2-port 361FLB FIO Adapter
NOTE: HP ProLiant BL420c Gen8 1Gb FlexibleLOM Configure-to-order Blade
Server (690142-B21) must be selected in order to select the 1Gb FlexibleLOM
Adapter.
HP Storage Controller HP Dynamic Smart Array B320i FIO Adapter for BL420c Gen8
NOTE: B320i controller requires SAS License Key for SAS RAID 0,1 (see "HP
Storage Controllers - Optional Upgrades" below in the section labeled "Core
Options").
HP Smart Array P220i Controller FIO Kit
NOTE: P220i Controller comes standard with 512MB FBWC.
647909-B21
708643-B21
647903-B21
684214-B21
684212-B21
700742-B21
684211-B21
684216-B21
651732-B21
690164-B21
Step 3: Choose Additional Factory Integration Options
HP Insight Software
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single
Server FIO License
Converged
HP OneView with iLO Advanced - Server hardware required on same
Infrastructure
purchase order
Management Software HP OneView for Blade Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
HP OneView for Blade Server incl 3yr 24x7 Supp FIO Bundle 1 Svr E-LTU
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
C6N36A
F6Q89A
F6Q89AAE
Page 23
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Configuration Information - Factory Integrated Models
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below. For additional
options, including server blade enclosures interconnect, mezzanine options and power subsystem options; please see the
Core Options and Additional sections below; or the following:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
NOTE: The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
NOTE: The c7000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html and
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 24
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Core Options
HP Networking
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server
memory.
NOTE: A 10 Gigabit Ethernet adapter supports linking at 1Gbps or 10Gbps
when connected to an interconnect module with 10Gb Ethernet downlinks.
NOTE: A 10 Gigabit Ethernet adapter supports linking at only 1Gbps when
connected to an interconnect module with 1Gb Ethernet downlinks.
NOTE: The 10 Gigabit Ethernet adapters on each server blade connect to a
10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 2-4
(HP BladeSystem c3000 Enclosure).
10 Gigabit Ethernet Mezzanines
HP Ethernet 10Gb 2-port 560M Adapter
HP FlexFabric 10Gb 2-port 554M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/14221_div/14221_div.html.
HP Flex-10 10Gb 2-port 552M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/14218_div/14218_div.html.
HP FlexFabric 10Gb 2-port 534M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/14617_div/14617_div.html
HP Flex-10 10Gb 2-port 530M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/14217_div/14217_div.html.
1 Gigabit Ethernet Mezzanines
HP Ethernet 1Gb 4-port 366M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/14335_div/14335_div.html
FlexibleLOM Adapters
NOTE: The server supports one (1) FlexibleLOM that is installed in the
FlexibleLOM connectors and is already included in the pre-configured models.
However, it must be added in Step 2 for Configure-to-order Models. The
FlexibleLOM options below are used to change these original FlexibleLOMs.
10 Gigabit Ethernet FlexibleLOM Adapters
HP Ethernet 10Gb 2-port 560FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/14331_div/14331_div.html
HP FlexFabric 10Gb 2-port 554FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/14219_div/14219_div.html
HP FlexFabric 10Gb 2-port 534FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/14617_div/14617_div.html
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
665246-B21
647590-B21
674764-B21
700748-B21
631884-B21
615729-B21
655639-B21
647586-B21
700741-B21
Page 25
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Core Options
HP Fibre Channel
HP Processors
HP Flex-10 10Gb 2-port 530FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/14216_div/14216_div.html
1Gb FlexibleLOM Adapters
HP Ethernet 1Gb 2-port 361FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/14333_div/14333_div.html
656590-B21
HP LPe1205A 8Gb Fibre Channel Host Bus Adapter for BladeSystem c-Class
NOTE: Please see QuickSpecs for technical specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/14338_div/14338_div.html
HP QMH2572 8Gb Fibre Channel Host Bus Adapter for BladeSystem c-Class
NOTE: Please see QuickSpecs for technical specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/14230_div/14230_div.html
659818-B21
NOTE: The BL420c Gen8 supports one or two processors.
NOTE: The BL420c Gen8 includes two I/O mezzanine expansion slots. A
processor must be installed in processor slot 1 for access to the first mezzanine
expansion slot (expansion slot 1). A processor must be installed in processor
slot 2 for access to the second mezzanine expansion slot (expansion slot 2).
NOTE: All processors within the server must be identical.
NOTE: the letter "L" preceding the model number indicates denotes lower
wattage.
NOTE: The processor model as well as the memory configuration determines
the maximum speed memory can operate. Please see the see the "Memory"
section later in this document.
E5-2400 v2 series Processors
HP BL420c Gen8 Intel® Xeon® E5-2470v2 (2.4GHz/10-core/25MB/95W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2450v2 (2.5GHz/8-core/20MB/95W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2440v2 (1.9GHz/8-core/20MB/95W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2430v2 (2.5GHz/6-core/15MB/80W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2420v2 (2.2GHz/6-core/15MB/80W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2407v2 (2.4GHz/4-core/10MB/80W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2403v2 (1.8GHz/4-core/10MB/80W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2450Lv2 (1.7GHz/10-core/25MB/60W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2430Lv2 (2.4GHz/6-core/15MB/60W)
Processor Kit
E5-2400 series Processors
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
652500-B21
651281-B21
724181-B21
724182-B21
724183-B21
724184-B21
724185-B21
724188-B21
724189-B21
724190-B21
724191-B21
Page 26
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Core Options
HP BL420c Gen8 Intel® Xeon® E5-2470 (2.3GHz/8-core/20MB/95W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2450 (2.1GHz/8-core/20MB/95W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2450L (1.8GHz/8-core/20MB/70W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2440 (2.4GHz/6-core/15MB/95W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2430 (2.2GHz/6-core/15MB/95W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2430L (2.0GHz/6-core/15MB/60W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2420 (1.9GHz/6-core/15MB/95W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2407 (2.2GHz/4-core/10MB/80W)
Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2403 (1.8GHz/4-core/10MB/80W)
Processor Kit
667372-B21
667373-B21
667423-B21
667374-B21
667375-B21
667424-B21
667376-B21
667421-B21
667422-B21
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual
memory speed may depend on the quantity and type of DIMMs installed.
NOTE: The BL420c Gen8 supports one or two processors.
NOTE: The BL420c Gen8 includes two I/O mezzanine expansion slots. A
processor must be installed in processor slot 1 for access to the first mezzanine
expansion slot (expansion slot 1). A processor must be installed in processor
slot 2 for access to the second mezzanine expansion slot (expansion slot 2).
NOTE: All processors within the server must be identical. Mixing different
processor models is not supported.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost
Technologies except the E5-2403 and E5-2407.
NOTE: The letter "L" following the model number indicates denotes lower
wattage.
NOTE: The processor model as well as the memory configuration determines
the maximum speed memory can operate. Please see the see the "Memory"
section later in this document.
HP Memory
NOTE: HP memory from previous generation servers are not qualified or
warranted with this HP ProLiant BL420c Gen8 Server. HP SmartMemory is
required to realize the memory performance improvements and enhanced
functionality listed in this document for Gen8. For additional information, please
see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies
and cannot be mixed within a server. The majority of ProLiant Gen8 servers
support RDIMM, UDIMM and LRDIMM.
HP SmartMemory
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series
Processors.
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS11 Low Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS11 Low Voltage Memory Kit
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
713981-B21
731765-B21
Page 27
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Core Options
HP 8GB (1x8GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS11 Low Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered
CAS-11 Low Voltage Memory Kit
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS9 Low Voltage Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS11 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS11 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered
CAS-9 Low Voltage Memory Kit
713983-B21
HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS11 Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series
Processors.
HP 2GB (1x2GB) Single Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS11 Low Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS11 Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS11 Low Voltage Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS11 Memory Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS9 Low Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series
Processors.
HP 32GB (1x32GB) Quad Rank x4 PC3-14900L (DDR3-1866) Load Reduced
CAS-13 Memory Kit
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced
CAS-9 Low Voltage Memory Kit
672631-B21
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
713985-B21
647893-B21
647895-B21
647897-B21
647899-B21
690802-B21
647901-B21
713975-B21
713977-B21
713979-B21
669320-B21
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
708643-B21
647903-B21
Page 28
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Core Options
NOTE: Depending on the memory configuration and processor model,
1866MHz, 1600MHz and 1333MHz memory may operate at a lower speed.
Please see the see the "Memory" section later in this document and the Online
Memory Configuration Tool for details at: www.hp.com/go/ddr3memoryconfigurator.
HP Hard Drives
NOTE: The ProLiant BL420c Gen8 server includes the new HP hot-plug small
form factor (SFF) SmartDrive carrier for enhanced management and reduced
maintenance errors. HP drives from previous generation servers are not
compatible with the BL420c Gen8 drive bays.
NOTE: The mixing of standard SAS drives with SAS SSD is supported within
the server, but limits the RAID configuration to two separate RAID 0 volumes.
Mixing of other drives types is not supported.
NOTE: HP hard drives have either a one year or three year warranty; refer to
the specific hard drive QuickSpecs for details.
NOTE: The hard drive options are not required when configuring a drive-less
model.
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard
Drive
NOTE: Please see the QuickSpecs for technical specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html.
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr
Warranty Hard
Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard
Drive
NOTE: Please see QuickSpecs for technical specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html.
6G SAS ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State
Drives
HP 800GB 6G SAS Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty Solid State Drive
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
655710-B21
655708-B21
718162-B21
652589-B21
652583-B21
652572-B21
652564-B21
652611-B21
652605-B21
652749-B21
652745-B21
690829-B21
Page 29
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Core Options
HP 400GB 6G SAS Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty Solid State Drive
HP 200GB 6G SAS Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty Solid State Drive
6G SAS SLC Hot Plug SFF (2.5-inch) Enterprise Performance Solid State
Drives
HP 400GB 6G SAS SLC SFF (2.5-inch) SC Enterprise Performance 3yr
Warranty Solid State Drive
HP 200GB 6G SAS SLC SFF (2.5-inch) SC Enterprise Performance 3yr
Warranty Solid State Drive
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot Solid
State Drives
NOTE: These drives support Gen8 servers only.
HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty
Solid State Drive
HP 80GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty
Solid State Drive
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid
State Drives
NOTE: These drives support Gen8 servers only.
HP 800GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty
Solid State Drive
HP 600GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty
Solid State Drive
HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty
Solid State Drive
HP 300GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty
Solid State Drive
HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty
Solid State Drive
6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State
Drives
HP 800GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty Solid State Drive
HP 400GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty Solid State Drive
HP 200GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty Solid State Drive
HP 100GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty Solid State Drive
NOTE: The mixing of standard SAS drives with SAS SSD is supported within
the server, but limits the RAID configuration to two separate RAID 0 volumes.
Mixing of other drives types is not supported.
NOTE: HP Dynamic Smart Array B320i Controller requires a SAS license key
for RAID 0 and 1 functionality for SAS drives when selecting a Configure-toOrder server. The SAS RAID license comes standard with preconfigured
servers. SATA RAID 0/1 standard.
NOTE: Please see the QuickSpecs for technical specifications and information
at:
http://h18000.www1.hp.com/products/quickspecs/14038_div/14038_div.html.
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
690827-B21
690825-B21
653082-B21
653078-B21
717965-B21
734360-B21
717973-B21
739898-B21
717971-B21
739888-B21
717969-B21
691868-B21
691866-B21
691864-B21
691862-B21
Page 30
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Additional Options
HP Insight software
HP iLO Advanced
HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Single
Server License
HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic
License
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO
Electronic License
HP Insight Control Server Provisioning Media Kit
HP Insight Management Media Kit
NOTE: HP Insight Management Media Kit contains DVDs without licenses.
Contains HP Systems Insight Manager, HP Insight Control, HP Matrix Operating
Environment, and Virtual Connect Enterprise Manager software. Uses an
integrated installer to perform quick and accurate software installation and
updates.
NOTE: HP Insight Control 7.2 introduces Insight Control server provisioning, a
new capability ideal for multi-server OS and firmware provisioning to ProLiant
and BladeSystem servers. Insight Control server provisioning is included and
licensed as part of HP Insight Control. A media kit, "HP Insight Control server
provisioning USB media kit" (# BD883A), including a USB, is available for
customers who require a physical copy of the media loaded with Insight Control
server provisioning software. Please note that this media kit is separate and in
addition to the "HP Insight Management DVD media kit" (#C6N31A).
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase
multiple licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: Licenses ship without media. The HP Insight Management Media Kit can
be ordered separately, or can be downloaded at:
http://www.hp.com/go/insightupdates.
NOTE: For additional license kits, please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html
HP Integrated Lights-Out (iLO) Advanced for ProLiant BladeSystem Remote
Management
HP iLO Advanced for BladeSystem including 1yr 24x7 Technical Support and
Updates E-LTU
NOTE: The Electronic software license is available in EMEA only.
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server
License
HP iLO Advanced for BladeSystem including 3yr 24x7 Technical Support and
Updates E-LTU
NOTE: The Electronic software license is available in EMEA only.
HP iLO Advanced Blade 1 Server License with 3yr 24x7 Tech Support and
Updates
HP Integrated Lights-Out (iLO)
HP iLO Scale Out
HP Integrated Lights-Out Scale-Out 3yr 24x7 Tech Support and Updates Flex
Quantity License
HP Integrated Lights-Out Scale-Out 1yr 24x7 Tech Support and Updates Flex
Quantity License
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
C6N27A
C6N28ABE
C6N36ABE
BD883A
C6N31A
E6U60ABE
512488-B21
E6U63ABE
BD502A
BD776A
BD778A
Page 31
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Additional Options
HP Integrated Lights-Out Scale-Out including 3yr 24x7 Tech Support and
Updates Flex Qty E-LTU
HP Integrated Lights-Out Scale-Out including 1yr 24x7 Tech Support and
Updates Flex Qty E-LTU
HP Integrated Lights-Out Scale-Out including 3yr 24x7 Tech Support and
Updates Tracking License
HP Integrated Lights-Out Scale-Out including 1yr 24x7 Tech Support and
Updates Tracking License
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits, including electronic delivery options, please
see the iLO QuickSpecs at http://www.hp.com/go/iLO
Converged
HP OneView
Infrastructure
HP OneView with iLO Advanced
Management Software
HP OneView incl 3yr 24x7 Supp Phys 1 Svr Lic
HP OneView incl 3yr 24x7 Supp Flex Qty E-LTU
HP OneView Media Kit Phys No Lic
HP OneView Media Kit Phys No Lic
HP OneView w/o iLO Adv incl 3yr 24x7 Supp Phys 1 Svr Lic
HP OneView w/o iLO Adv inc 3yr 24x7 Supp Flex Qty E-LTU
NOTE: For additional license kits please see the QuickSpecs at
http://h18004.www1.hp.com/products/quickspecs/14621_div/14621_div.html
High Performance
Clusters
HP I/O Accelerator
Options
HP Cluster Management Utility
HP Insight Cluster Management Utility 1yr 24x7 Flexible License
HP Insight Cluster Management Utility 3yr 24x7 Flexible License
NOTE: These part numbers can be used to purchase one certificate for multiple
licenses and support with a single activation key. Each license is for one node
(server). Customer will receive a printed end user license agreement and license
entitlement certificate via physical shipment. The license entitlement certificate
must be redeemed online in order to obtain a license key. Customer also will
receive a support agreement.
HP Insight Cluster Management Utility Media
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html.
HP 1.2TB Multi Level Cell IO Accelerator for BladeSystem c-Class
NOTE: This option is a Type B mezzanine and only supported on mezzanine 2,
which requires the second processor to be installed for functionality.
HP 785GB Multi Level Cell IO Accelerator for BladeSystem c-Class
NOTE: This option is a Type B mezzanine and only supported on mezzanine 2,
which requires the second processor to be installed for functionality.
HP 365GB Multi Level Cell IO Accelerator for BladeSystem c-Class
NOTE: This option is a Type B mezzanine and only supported on mezzanine 2,
which requires the second processor to be installed for functionality.
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
BD776AAE
BD778AAE
BD777A
BD779A
E5Y34A
E5Y35AAE
E5Y37A
E5Y38A
E5Y39AAE
QL803B
BD476A
BD477A
QK763A
QK762A
QK761A
Page 32
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Additional Options
HP Security
HP Trusted Platform Module Option
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can
securely store artifacts used to authenticate the server platform. These artifacts
can include passwords, certificates and encryption keys. Windows® BitLocker™
Drive Encryption (BitLocker) is a data protection feature available in Windows
Server® 2008. BitLocker leverages the enhanced security capabilities of a
Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to
help protect user data and to ensure that a server running Windows Server 2008
has not been tampered with while the system was offline.
NOTE: For more information about TPM, including a white paper, go to:
http://www.hp.com/go/TPM.
NOTE: ProLiant OS pre-installed units will come with the partition required for
TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be
retained. Misplacing or losing the key could result in data loss.
HP Storage Controllers HP Smart Array P731m/2G Controller
HP Smart Array P731m/2GB FBWC 6Gb 4-ports Ext Mezzanine SAS Controller
NOTE: This option is a Type B mezzanine and only supported on mezzanine 2,
which requires the second processor to be installed for functionality.
HP Smart Array P731m/512 FBWC 6Gb 4-ports Ext Mezzanine SAS Controller
NOTE: This option is a Type B mezzanine and only supported on mezzanine 2,
which requires the second processor to be installed for functionality.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/14626_div/14626_div.html.
(Smart Array P731m Controller)
HP Smart Array P721m Controller
HP Smart Array P721m/2G FBWC 4-ports Ext Mezzanine SAS Controller
NOTE: This option is a Type B mezzanine and only supported on mezzanine 2,
which requires the second processor to be installed for functionality.
HP Smart Array P721m/512 4-ports Ext Mezzanine SAS Controller
NOTE: This option is a Type B mezzanine and only supported on mezzanine 2,
which requires the second processor to be installed for functionality.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/14404_div/14404_div.html.
(Smart Array P721m Controller)
HP Dynamic Smart Array B320i Specific Options:
NOTE: The following storage controller options below are not supported on the
HP Smart Array P220i controller.
HP 512MB B-series Dynamic Smart Array Flash Backed Write Cache with 24
inch Cable
HP SAS License Key No Media 1 Single Server License for B320i
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/13200_div/13200_div.html
(Smart Array Advanced Pack)
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
488069-B21
698535-B21
698536-B21
650072-B21
655636-B21
676473-B21
BC393A
Page 33
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Additional Options
HP InfiniBand
Mezzanines
HP Ultrium Tape
Blades
NOTE: When an InfiniBand adapter is installed in mezzanine slot 1, only one
port is active (regardless of operating mode). When installed in any other
mezzanine slot, both ports are active.
NOTE: InfiniBand QDR and FDR speeds are only supported on the HP
BladeSystem c7000 Enclosure. For additional information, please see the HP
BladeSystem c7000 Enclosure and InfiniBand QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12586_div/12586_div.html
http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html
HP Infiniband QDR/Ethernet 10Gb 2-port 544M Adapter
NOTE: The QDR InfiniBand adapter may be installed in any mezzanine slot of
the server.
HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544M Adapter
NOTE: The FDR InfiniBand adapter must be installed in mezzanine slot 1 for
FDR mode and may be installed in any mezzanine slot if operated in any other
mode.
HP InfiniBand FDR 2-port 545M Adapter
644160-B21
644161-B22
702213-B21
HP StoreEver LTO-4 Ultrium SB1760c Tape Blade
NOTE: LTO-4 Ultrium tape technology.
HP StoreEver LTO-5 Ultrium SB3000c Tape Blade
NOTE: LTO-5 Ultrium tape technology.
NOTE: For the above Ultrium tape drives, please see the QuickSpecs for
technical specifications and additional information at:
http://h18000.www1.hp.com/products/quickspecs/12729_div/12729_div.html
AQ697B
HP Storage Blades
HP D2200sb PCIe Storage Blade
NOTE: Please see the QuickSpecs for technical specifications and additional
information at: http://h18006.www1.hp.com/storage/bladesystem/index.html.
AP880A
HP Expansion Blade
HP BLc PCI Expansion Blade
NOTE: The PCI Expansion Blade provides PCI card slots for an adjacent cClass Server Blade. Order one PCI expansion Blade for each server blade
needing standard PCI-X or PCIe expansion slots.
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one
PCIe connect board which requires installation.
NOTE: Please see the QuickSpecs for technical specifications and additional
information at
http://h18000.www1.hp.com/products/quickspecs/12753_div/12753_div.html
448018-B21
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
BS580B
Page 34
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Additional Options
HP Flash Media Kits
for USB Drives
HP Flash Media Kits for USB Drives
HP 2GB USB Flash Media Drive Key Kit
NOTE: HP qualified blank USB key for use with HP ProLiant servers that
support the VMware virtualization environment. HP recommends this industry
standard USB flash device for use with VMware ESXi. USB device must be
installed in the internal slot of the ProLiant server for use with VMware ESXi.
Refer to HP VMware Getting Started Guide for installation instructions.
HP Enterprise Mainstream Flash Media Kits for Memory Cards
HP 8GB microSD Enterprise Mainstream Flash Media Kit
HP 32GB microSD Enterprise Mainstream Flash Media Kit
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13971_div/13971_div.html
HP Care Pack Services Proactive Care - Collaborative Support plus Proactive services delivered by the
on shore/near shore Advanced Solution Center (ASC) and backed by the global
delivery organization, end-to-end case ownership from a Technical Solution
Specialists and Technical Account Manager who remotely delivers
firmware/software revision management, proactive scans and incident trend
reports. Recommended for customers running a virtualized infrastructure and/or
customers who desire an enhanced call support experience.
HP 3 year 4 hour 24x7 ProLiant BL4xxc Proactive Care Service
HP 3 year 4 hour 24x7 with Defective Media Retention ProLiant BL4xxc
Proactive Care Service
HP 3 year 6 hour Call To Repair 24x7 ProLiant BL4xxc Proactive Care Service
HP 3 year 6hr Call To Repair 24x7 with Defective Media Retention ProLiant
BL4xxc Proactive Care SVC
Proactive Care Personalized Support Environmental Option - to add an
onsite Account Support Manager (ASM) to Proactive Care. ASM is an assigned
resource who delivers support planning and brings technical expertise and best
practices advice for the customer's environment.
HP 3 year ISS ProactiveCare Personalized Support
Installation Services - reduce the time required to get your system up and
running and help minimize disruptions to your business.
HP Install c-Class Server Blade Service
HP Hardware Installation during Non Standard Hours c-Class Server Blade
Service
Additional HP Care Pack services can be found at:
http://www.hp.com/go/cpc
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
608447-B21
726116-B21
700139-B21
737953-B21
U3B14E
U3B17E
U3B20E
U3B23E
U6W98E
UE493E
UG869E
Page 35
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
QuickSpecs
Memory
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Memory Subsystem Architecture
Each Intel® Xeon® E5-2400 family or Intel Xeon E5-2400v2 family processor socket contains three memory channels that
support two DIMMs each for a total of six (6) DIMMs per installed processor or a grand total of twelve (12) DIMMs for the
server. Up to 32GB capacity DIMMs are supported for 384GB of memory (12 DIMM slots x 32GB per DIMM).
Memory Population Rules and Guidelines:
A minimum of one DIMM is required per server.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
To maximize performance, it is recommended to balance the total memory capacity between all installed processors
and to load the channels similarly whenever possible.
RDIMMs operating at either 1.35V or 1.5V may be mixed in any order, but the system will power them at the higher
voltage.
RDIMMs, LRDIMMs, and UDIMMs cannot be mixed.
DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
The maximum memory speed is a function of the memory type, memory configuration, and processor model.
The maximum memory capacity is a function of the memory type and number of installed processors.
HP memory from previous generation servers is not compatible with the BL420c Gen8 Server Blade.
To realize the performance memory capabilities listed in this document, HP SmartMemory is required. For additional
information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html.
For memory population rules and additional memory guidelines, please see the BL420c Gen8 user guide at
http://www.hp.com/support.
BL420c Gen8 Supported Memory Bandwidth on Intel E5-2400 series Processors
Load
Reduced
Unbuffered with ECC DIMMs
DIMM Type
Registered DIMMS (RDIMMs)
(LRDIMMs)
(UDIMMs)
DIMM Rank
Single Dual Dual
Quad
Single
Dual
Single
Dual Rank Rank Rank Rank
Rank
Rank
Rank
Rank (1R)
(2R)
(1R) (2R) (2R)
(4R)
(1R)
(2R)
DIMM Capacity
4GB 4GB 8GB 8GB 8GB 16GB 16GB
32GB
2GB 2GB 4GB 4GB 8GB 8GB
DIMM Native Speed
1333 1600 1333 1600 1600 1333 1600
1333
1333 1600 1333 1600 1600 1333
(MHz)
Voltage1
LV Std LV Std Std
LV Std
LV
LV Std LV Std Std LV
1LV= low voltage at 1.35V; Std = standard voltage at 1.5V.
SLOTS THAT CAN BE POPULATED
12 slot servers
12
12
12
12
12
12
12
12
12
12
12
12
12
12
MAXIMUM CAPACITY (GB)2
12 slot servers
48
96
96
96
192
192
384
24
24
48
48
96
96
48
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel
1333 1600 1333 1600 1600 1333 1600
2 DIMM Per Channel
1333 1600 1333 1600 1600 1333 1600
13333
13333
1333 1600 1333 1600 1600 1333
13334 1600 13334 1600 1600 13334
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 36
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
QuickSpecs
Memory
2
3
Maximum capacity will vary based on individual server platform qualification schedule
Using HP SmartMemory, 1333MHz LRDIMM operate at 1.35V for 2 DIMMs per channel (2DPC). Third party 1333MHz
LRDIMM memory may only support 1.5V at 2DPC.
4 Using HP SmartMemory, UDIMMs at 2DPC are supported up to 1333MHz. Third party UDIMMs at 2DPC may only
support up to 1066MHz.
NOTE: Maximum memory speed is a function of the processor QPI bus speed; see the table below "Memory Speed by
Processor Model".
Intel Gen8 Supported Memory Bandwidth on E5-2400v2 series Processor
Load
Reduced
DIMM Type
Registered DIMM
(LRDIMMs)
DIMM Rank
Single
Dual
Quad
Single Dual Rank Rank (1R) Rank (2R) Rank
Rank (1R)
(2R)
(4R)
DIMM Capacity
4GB
8GB
8GB
16GB
32GB
DIMM Native Speed
1600
1600
1600
1600
1866
(MT/s) - >
Voltage
LV
LV
LV
LV
Std
1LV= low voltage at 1.35V; Std = standard voltage at 1.5V.
Unbuffered DIMM
Single
Dual
Rank
Rank
(1R)
(2R)
2GB
4GB
8GB
1600
1600
1600
LV
LV
LV
SLOTS THAT CAN BE POPULATED
12 slot servers
12
12
12
12
12
12
12
12
MAXIMUM CAPACITY (GB)*
12 slot servers
48
96
96
192
384
24
48
96
1600
1600
1600
1600
POPULATED DIMM SPEED (MT/s)
1 DIMM Per Channel
1600
1600
1600
1600
16001
1600
1
2 DIMM Per Channel
1600
1600
1600
1600
1600
1600
Memory speed is a function of the processor QPI bus speed.
* Maximum capacity will vary based on individual server platform qualification schedule
1Intel Xeon E5-2400v2 architecture supports maximum 1600MHz memory speeds.
Memory Speed by E5-2400 series Processor Model
Processor Models
E5-2450, E5-2450L, E5-2470
E5-2420, E5-2430, E5-2430L, E5-2440
E5-2403, E5-2407
Supported Memory Speeds
1600/1333/1066MHz
1333/1066MHz
1066MHz
Memory Speed by E5-2400 v2 series Processor Model
Processor Models
E5-2420 v2, E5-2430 v2, E5-2430L v2, E5-2440 v2, E5-2450
v2, E5-2450L v2, E5-2470 v2
E5-2403 v2, E5-2407 v2
Supported Memory Speeds
1600/1333MHz
1333MHz
Standard and Maximum Memory Capacity (Pre-configured Models)
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 37
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
QuickSpecs
Memory
Pre-Configured Models
Standard Memory
E5-2450 (6x4GB 1600)
E5-2450L, E5-2430, E5-2403
(3x4GB 1333)
24GB
(6x 4GB)
12GB
(3x 4GB)
Maximum Memory Plus
Optional Memory
120GB
(6x4GB + 6x 16GB)
156GB
(3x 4GB + 9x 16GB)
Standard Memory Replaced
with Optional Memory
384GB
(12x 32GB LRDIMM)
384GB
(12x 32GB LRDIMM)
NOTE: Capacity references are rounded to the common gigabyte (GB) values.
2GB = 2,048MB
4GB = 4,096MB
8GB = 8,192MB
16GB = 16,384MB
32GB = 32,768MB
Memory options part number decoder
Following are memory options available from HP:
NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant BL420c Gen8
Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in
this document for Gen8. For additional information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a server. The
majority of ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM.
HP Memory
HP SmartMemory
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2400 v2 series Processors.
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS713981-B21
11 Low Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS731765-B21
11 Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11
713983-B21
Low Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS713985-B21
11 Low Voltage Memory Kit
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2400 series
Processors.
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 38
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Memory
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9
Low Voltage Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS9 Low Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS11 Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series Processors.
HP 2GB (1x2GB) Single Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS11 Low Voltage Memory Kit
647893-B21
HP 4GB (1x4GB) Dual Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS-11
Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS-11
Low Voltage Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS11 Memory Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS9 Low Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series Processors.
HP 32GB (1x32GB) Quad Rank x4 PC3-14900L (DDR3-1866) Load Reduced
CAS-13 Memory Kit
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced
CAS-9 Low Voltage Memory Kit
NOTE: Depending on the memory configuration and processor model, 1866MHz,
1600MHz and 1333MHz memory may operate at a lower speed. Please see the
see the "Memory" section in this document and the Online Memory Configuration
Tool for details at: www.hp.com/go/ddr3memory-configurator.
713977-B21
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
647895-B21
647897-B21
647899-B21
690802-B21
647901-B21
672631-B21
713975-B21
713979-B21
669320-B21
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
708643-B21
647903-B21
Page 39
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Storage
1-2
Maximum Internal Storage
Hot Plug SFF SAS
2.4TB
Hot Plug SFF SATA
2.0TB
Hot Plug SFF SAS SSD 1.6TB
Hot Plug SFF SATA
1.6TB
SSD
2 x SFF hot-plug SAS, SATA, SAS SDD, and SATA
SSD hard drives
2 x 1.2TB
2 x 1.0TB
2 x 800GB
2 x 800GB
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 40
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Technical Specifications
System Unit
Dimensions (H x W x
D)
(with bezel)
Weight
(approximate)
Power Specifications
7.11 x 2.18 x 20.37 in (18.07 x 5.54 x 51.76 cm)
Maximum: all processors, 14.00 lb (6.33 kg)
12 DIMMs, hard drives,
mezzanine cards, and two
flash cache batteries
installed)
Minimum: one processor 10.50 lb (4.75 kg)
and 2 DIMMs installed
For power specifications including input requirements, BTU rating, and
power supply output, please see the:
HP BladeSystem c3000 Enclosure QuickSpecs at
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html.
HP BladeSystem c7000 Enclosure QuickSpecs at
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html.
System Inlet
Temperature
To review typical system power ratings use the HP Power Advisor which
is available via the online tool located at:
www.hp.com/go/hppoweradvisor.
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1,000 ft) above sea level to
a maximum of 3,050 m (10,000 ft), no direct
sustained sunlight.
Maximum rate of change is 10°C/hr (18°F/hr).
The upper limit may be limited by the type
and number of options installed.
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
System performance may be reduced if
operating with a fan fault or above 30°C
(86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate
of change is 20°C/hr (36°F/hr).
Operating
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature,
non-condensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
Operating
3,050 m (10,000 ft). This value may be
limited by the type and number of options
installed. Maximum allowable altitude change
rate is 457 m/min (1,500 ft/min).
Non-operating
9,144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1,500
ft/min).
For acoustic noise specifications, please see the HP BladeSystem cClass Enclosures QuickSpecs located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 41
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Technical Specifications
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
HP Smart Array P220i Disk Drive Interface
Controller
Server Interface
Cache Memory
Logical Drives
Supported
Host Memory
Addressing
RAID Support
Other
6Gb/s SAS (Serial Attached SCSI)
x4 PCI Express host interface
512MB flash backed write cache (FBWC) cache standard
64 (with included 512MB cache)
HP Dynamic Smart
Dimensions
Array B320i Controller Disk Drive Interface Transfer rate
Connectors
Server Interface
Speed
Cache Memory
Embedded
Up to 6Gb/s SAS (Serial Attached SCSI)
Up to 6Gb/s SATA (Serial ATA)
2 internal 4X connectors
x8 PCIe 3.0 provides 8GB/s maximum bandwidth
8 6Gb/s SAS links provide 4.8GB/s maximum bandwidth
Zero Memory RAID has no cache memory
optional 40-bit 512MB ECC protected Flash Backed Write Cache
(FBWC)
Zero Memory, Up to 2 logical volumes (8 physical drives)
Up to 64 logical drives with cache
64-bit, supporting greater than 4GB server memory space
Logical Drives
Supported
Host Memory
Addressing
Hot Plug Support
RAID Support
64-bit, supporting servers memory space greater than 4GB
RAID 1 (mirroring) and RAID 0 (striping)
Upgradeable firmware with recovery ROM
Online drive flash (with SAS drives)
Yes
RAID 0 (Striping), RAID 1 (Mirroring)
RAID 1+0 (Striping & Mirroring)
RAID 5 with optional 512MB FBWC
NOTE: 512 MB cache is required to enable RAID 5 support
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 42
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Technical Specifications
HP FlexFabric 10Gb
2-port 554FLB
FlexibleLOM
Type
Integrated dual-port KR 10Gb FlexibleLOM with FlexFabric (Flex-10,
FCoE, hardware-based iSCSI, iSCSI boot, TCP/IP offload engine, and
autosensing 1Gb/10Gb Ethernet capability)
Network Processor
Emulex BE3
Data Transfer Method x8 PCIe 2.0
Network Transfer Rate Two ports, each at 20Gbps full duplex; 40Gbps aggregate full duplex
theoretical bandwidth
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with
1Gb HP BladeSystem c-Class interconnect components. Both ports will
operate at the same speed.
NOTE: Each port on the 554FLB adapter transmits from the server at
20Gbps (theoretical) full duplex.
IEEE Compliance
802.1p, 802.1q, 802.1qau, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4)
and 802.3x
Standard Features
ProLiant Teaming including Network Fault Tolerance, Transmit Load
Balancing, and Switch-Assisted Load Balancing
9K Jumbo frames (4K Jumbo frames when in FCoE mode)
Microsoft Windows Receive Side Scaling (RSS)
Hardware-based accelerated iSCSI
iSCSI boot
Flex-10 capability
Fibre Channel over Ethernet (FCoE)
TCP/IP offload engine (stateless TCP/IP)
Autosensing 1Gb/10Gb Ethernet
HP Ethernet 1Gb
Type
2-port 361FLB Adapter Network Processor
Data Transfer Method
Network Transfer Rate
IEEE Compliance
Standard Features
Dual port 1Gb Ethernet FlexibleLOM
Intel I350 Ethernet Controller
x4 PCIe 2.0
Two ports, each at 1000 Mbps full duplex (theoretical maximum)
NOTE: The 361FLB adapter transmits from the server at only 1 Gbps
full duplex per port.
802.1p, 802.1Q, 802.3, 802.3ad, and 802.3x, IEEE1588, 802.1AS
ProLiant Teaming including Network Fault Tolerance, Transmit Load
Balancing, and Switch-Assisted Load Balancing
TCP/IP checksum offloading
large send offloading
Wake-on-LAN
jumbo frames
PXE
VLAN tagging
Virtualization
IEEE 1588, DMA Coalescing
HP Sea of Sensors 3-D Technology
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 43
QuickSpecs
HP ProLiant BL420c Generation 8 (Gen8) Server
Blade
Technical Specifications
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon
Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 14324 Worldwide QuickSpecs — Version 20 — 3.31.2014
Page 44
Download PDF
Similar pages