Industrial Device Server 4/8 Port Device Server
v1.5 / Dec, 2011
Industrial 4-port/8-port slim type serial to Ethernet device server
Industrial
Media Converter
Features
Industrial
Ethernet Switch
IDS-141A/181A
▪ Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
▪ Multiple host devices :
5 host devices: Virtual COM, TCP Server, TCP Client mode;
4 IP ranges : UDP
▪ NAT Pass-Through : the user can manage IDS-181A/141A through NAT router
Industrial
Device Server
▪ Security : SSL data encryption; secured management by HTTPS and SSH
IP Access : IP White List
▪ Update DNS Hostname : DDNS
▪ Event Warning by Syslog, Email, SNMP trap and Relay
▪ Configurable by Web-based and Windows utility (DS-Tool)
Industrial Wireless
Access Point
▪ Various Windows O.S. supported :
Windows NT/ 2000 / XP / 2003 / VISTA(32/64-bit) / Windows 7(32/64-bit)
IDS-181A/141A is an innovative secure 8-port/4-port RS-232 to 1-port LAN serial to Ethernet device server featuring the standard features of device
server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP, Ethernet modem. In addition, the
Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, and DDNS make
it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On
the other hand, IDS-181A/141A can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails.
Further, IDS-181A/141A features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.
Industrial
M2M Gateway
IDS-181A/141A provides dual redundant power inputs, 12~48VDC on terminal block and DC power jack to guarantee a non-stop operation. With
wide operating temperature, -40~70°C, and rugged IP-30 housing design, IDS-181A/141A could operate in the harsh industrial environment. Therefore IDS181A/141A is the best solution to the high demand of secure serial to Ethernet critical data communication.
Industrial Cellular
VPN Router
Introduction
DS-Tool
LAN
Serial
RS-232
RS-232
Serial
Multiple Host PCs
NAT Router Pass-Through
D esign ed for R u gged E xcellence
Network
Management Software
IDS-141A/181A
IDS-141A/181A
Accessories
In practical operation of serial device servers, Windows utility (DS-Tool) is supported. This utility is very helpful for you to manage and monitor all of
industrial device servers in the industrial network.
3-39
Industrial Device Server 4/8 Port Device Server
v1.5 / Dec, 2011
LAN
Serial
Data Encryption
Data Encryption
IDS-141A/181A
LAN
Serial
RS-232
3
Data Encryption
IDS-141A/181A
Connect Through PPPoE / DDNS
SSL Data Encryption
Industrial Device Server
RS-232
IDS-141A/181A
TCP Server
IDS-141A/181A
TCP Client
TCP Server/Client Mode
Monitoring and Configuration interface
Dimensions
Unit=mm
3-40
w w w.ori ng-net wo rk in g.co m
Credit Card
Machine
Industrial Device Server 4/8 Port Device Server
v1.5 / Dec, 2011
8
7
6
5
4
3
2
1
P5
P1
Industrial
Ethernet Switch
Pin Definitions
P9
P6
DB9 Male Pin Assignment
OD 5.0mm
4
P43
2
P21
DB62 Male with 4/8-port
RS-232 connector
P62
4-port DB9 Male connector
1
Industrial
Device Server
P1
3
Pin #
RS-232
1
DCD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
N.C.
RS 232 mode act as DTE
Industrial
Media Converter
8-port DB9 Male connector
Industrial Wireless
Access Point
Industrial Cellular
VPN Router
DB62 Male to 8-port DB9 connector
(For IDS-181A)
DB62 Male to 4-port DB9 connector
(For IDS-141A)
Industrial
M2M Gateway
Accessories
Network
Management Software
D esign ed for R u gged E xcellence
3-41
Industrial Device Server 4/8 Port Device Server
v1.5 / Dec, 2011
Specifications
ORing Device Server Model
IDS-181A
IDS-141A
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
1
Serial Ports
3
RS-232 Serial port number
Serial Baud Rate
110 bps to 115.2 Kbps
Industrial Device Server
Data Bits
7, 8
Parity
odd, even, none, mark, space
Stop Bits
1, 1.5, 2
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Flow Control
XON/XOFF, RTS/CTS, DTR/DSR
8
4
Connector
DB62 Female (provide DB62 to 8 ports DB9 cable)
Operation Mode
RS-232
DB62 Female (provide DB62 to 4 ports DB9 cable)
Network Features
Network Protocols
ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS
LED Indicators
10/100Base-T(X) RJ45 Port Indicator
PWR 1(2) / Ready :
Green On : Power is on and functioning Normally.
Green Blinking : Located by Administrator.
Green for port Link/Act. Amber for port Link/Act at 100Mbps.
Serial TX / RX LEDs
Red : Serial port is receiving data
Power Indicator
Green : Serial port is transmitting data
Fault Contact
Relay
Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power
Triple DC inputs. 12~48VDC on 6-pin terminal block and power jack
Power Consumption (Typ.)
4.5 Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present on terminal block
3.7 Watts
Physical Characteristics
Enclosure
IP-30
Dimensions (W x D x H)
26.1(W) x 94.9(D) x 144.3(H) mm
Weight (g)
358 g
355 g
Environmental
Storage Temperature
-40 to 85°C (-40 to 185°F)
Operating Temperature
-40 to 70°C (-40 to 158°F)
Operating Humidity
5% to 95% Non-condensing
Regulatory Approvals
EMI
Shock
FCC Part 15, CISPR (EN55022) class A
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8,
EN61000-4-11
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Safety
EN60950-1
EMS
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C )
Warranty
3-42
w w w.ori ng-net wo rk in g.co m
73,914
5 years
76,637
Industrial Device Server 4/8 Port Device Server
v1.5 / Dec, 2011
Industrial
Ethernet Switch
Ordering Information
I DS -1 A B -A
Code Definition
Serial Port Number
Model Name
Description
IDS-181A-US
Industrial 8-port slim type secure serial to Ethernet device server with 8xRS-232 and 1x10/100Base-T(X), DB62 connector, US
adapter
IDS-181A-EU
Industrial 8-port slim type secure serial to Ethernet device server with 8xRS-232 and 1x10/100Base-T(X), DB62 connector, EU
adapter
IDS-141A-US
Industrial 4-port slim type secure serial to Ethernet device server with 4xRS-232 and 1x10/100Base-T(X), DB62 connector, US
adapter
IDS-141A-EU
Industrial 4-port slim type secure serial to Ethernet device server with 4xRS-232 and 1x10/100Base-T(X), DB62 connector, EU
adapter
Optional Accessories (Can be purchased separately)
‧DR-45 series, 45W DIN-Rail power supply
‧DR-75 series, 75W DIN-Rail power supply
‧DR-120 series, 120W DIN-Rail power supply
‧SDR-240-48, 240W DIN-Rail power supply
‧SDR-480-48, 480W DIN-Rail power supply
‧PAA-121000, 12VDC/1000mA 12W Power Adapter, US plug
‧PAE-121000, 12VDC/1000mA 12W Power Adapter, EU plug
Industrial Wireless
Access Point
Packing List
‧IDS-181A/141A
‧DIN-Rail Kit
‧Wall-mount Kit
‧DB62 to DB9 Cable
‧ORing Tool CD
‧Quick Installation Guide
Industrial
Device Server
Available
Model
- 1: 1 port
Industrial
Media Converter
- 4: 4 ports
- 8: 8 ports
Option
10/100Mbps Ethernet Port Number
Industrial Cellular
VPN Router
Industrial
M2M Gateway
Accessories
Network
Management Software
D esign ed for R u gged E xcellence
3-43
Download PDF
Similar pages