Table of Contents
Disc Handling And Maintenance..........5
Notice .............................................................................2
User Guide ......................................................................3
The Remote Control uses and maintains......................... 4
Disc Handling And Maintenance .....................................5
Playable Disc .................................................................6
Front Panel's Diagram .................................................... 7
Remote Control's Diagram............................................... 8
Function Instructions................................................9~12
Basic Operations ..................................................................13~28
M pP3 Functions
............................................................. 29
Touch screen function introduction.........................30~37
Troubleshooting .....................................................38~39
Installation
.................................................................. 40
Characteristics And Specifications .............................. 41
1
Notice
Characteristics And Specification
Important prevention measure
CHARACTERISTICS
FM
Frequency range ( Europe/Aust )........................................................... 87.5-108.0MHz
Frequency range( America )................................................................... 87.5-107.9MHz
Intermediate frequency...................................................................................... 10.7MHz
Practicality neat (S/N 30dB) .................................................................. less than 22dB
Stereo separation .................................................................................. more than 25dB
AM
Frequency range ( Europe )....................................................................... 522-1620KHz
Frequency range ( Aust )........................................................................... 5 22-1710KHz
Frequency range( America )....................................................................... 530-1710KHz
Intermediatef requency.. .................................................................................... 450KHz
Practicalityn eat (S/N 20dB) ................................................................... lessth an4 8dB
TFT LCD Monitor
Please read the entire instruction Manual about your monitor and preserve properly
it, by win prepare later to consult.
1. Before operating this monitor , please read this instruction manual carefully.
2. Please preserve the instruction manual in convenient place, in order to consult
sequence of operation and security information.
3. Please pay more attention to the instruction manual each warning, and strictly
carries on the operation according to the instruction.
4. Other people except have read and grasped the operation explanation,
otherwise, do not let him use this system.
5. Do not install the monitor in which may cause:
A. Block off the driver ' s sightline.
B. Affects the vehicles any operating system or the security function
performance (including the button of the security aerocyst and caution light),
or interrupts the driver safe driving the position.
6. If operates this monitor to disperse your attention. Causes you are unable to
drive vehicles safely. Please observe the safe driving rule and pay attention to all
present traffic regulations, if you are operating system or reading the display in
trouble. Please park your car safely, then make with the necessary ajudgement.
7. Please remember to tie the safety belt when you driving, otherwise, if the
accident has happened. The injured degree will intensify.
8. Do not wear the earphone when you driving.
9. To ensure safety. Do not use some function when the brake is pulled up and the
vehicle is driving.
10. Do not turn up the volume too high. You can ' t hear the outer activity.
! CAUTION
Liquid screen size.............................................................6.5 inch(Diagonal)
LCD dimension ............................................. 154.4(W)X92.6(H)X5.90(D)mm
Display format ............................................................ 480X(R,G,B)X234 dot
Display area...........................................................137.52(W)
77.22(V)mm
Specifications
Power .............................................................................................. DC12-13.8V, -earth
Dimensions.. ................................................................... 178(L)X158(W)X100.5(H)mm
NOTICE: The specification and design of this product are subject to changes
without prior notice.
Don ' t try installing or repairing your monitor . If you have no training about
electronic setup and car fittings, and who have no relational experiences. You
will be injured by electric shock or other danger.
! CAUTION
In order to avoid the accident and break the relational law. Do not use the display
monitor which the driver can be watching with this unit.
In order to avoid the accident has happened, and break the relational law. Do not
use the front DVD function when driving, and the back monitor should not install
it in which separate the driver' s attention.
In some country or states, even if the driver or others, watching image from the
monitor will break the law. In similar area, must keep the rules and do not use the
DVD function.
! CAUTION
Do not install the vehicles which have no ACC function.
41
2
User Guide
Installation
About unit
CAUTION:
! Notice
A. This unit is used at the 13.8V DC ground. In the condition of the negative
ground connect with the metal body of car, so it is safe to operate.
B. Fix the unit in the steady parts. If you parked your car to direct the sunlight wait
until the temperature in the car becomes normal before operating the unit.
C. If this unit is out of order. Please shut off the power sources immediately and
contact with authorized repairman in time. Do not disassemble it by yourself.
D. Please forgive us that we are irresponsible for the damages by your own defect.
1. Always use an experienced installation technician.
2. The location of the player must not obstruct the driver .
3. Do not install the player in excessive dusty, shakable, high-temperature
or humid condition.
,
Note : these conditions will adversely affect the player s operation.
4. Follow the player connecting diagram, using the appendixes provided with
the unit.
Protect LCD monitor
When this unit does not use in long time. Do not expose the LCD monitor to direct
sunlight. Otherwise, it will cause the function out of gear.When use the mobile
phone, please keep away from the monitor, so that video signal was interrupted
decause of spot, color stripe, etc.
Body
Mounting metal bar
Hex. nut
! Notice
A. When your hands have sweat, water.
B. When your hands have dirt.
Do not touch the monitor to avoid it was damaged and cause the operating can' t
control.
Flat washer
Screw
RESET MPU
Press ' RESET ' button to reset MPU to
default MPU must reset as following
situation:
When finished the installation before
use this unit first.
If this unit can ' t operate normally.
When the monitor appears
exceptionally or the error message.
Flexible washer
Press RESET
Hex. Bolt
Car panel
1. Turn off the Ignition switch.
2. Use the pen point or other edgily tools to press.
Unit
Car back video input function
This unit includes car back video input function. (When car back camera connects
this player), during the operation of car backing, this player changes from play
mode to car back video input mode automatically.
Then the screen shows you back view, it protects you more safely.
Install the screw
Install the bracket
Note:Maybe some camera lens can' t match with this monitor,so it will appear
horizontal line on picture.Only need press 9P/N button over 2 seconds on
remote control to set system match in 3 seconds,then solve this question.
3
40
The Remote Control uses and maintains
Troubleshooting
The troubles in DVD playing
Trouble
Fails to
dialogue
language and
subtitle
language
Install battery
Reason
Measure
If the disc does not record
The playing DVD has not
multi-lingual record content. muti-lingual, you will not switch
it.
If the disc has not record
You have to switch in the
subtitle. The subtitle can't
item of the disc menu.
display.
Do not display The playing DVD has no
subtitle.
the subtitle
You only switch in display
items of the disc menu.
Fails to accord
to D/K mode in The playing DVD has not
multi-lingual record content.
DVD SETUP
to carry out
playing.
The playing DVD has not
shoot scene which from
multi-angle.
The disc has signal which
forbid copy.
(Some may have this
signal.)
To prize the battery tray with the tip tool.
Pull out the battery tray and insert the battery +
towards up.
If the disc has not record
subtitle. The subtitle can't
display.
3V
+
Use the disc menu to switch.
3V
+
If the disc has not record the
selecting language in DVD
SETUP. It can't switch to
selecting language.
If the DVD has not record the
scent from multi-angle, you will
not switch in multi-angle.
Fails to switch
angle
You are trying to multi-angle Watch the record scene from
watch scene which has not
multi-angle shoot to switch in
shoot from milti-angle.
multi-angle.
The picture
unclear /
Distortion &
Dark.
Slide out the battery seat from the back of remote contr
ol, then according to
anode and negative direction to insert the battery.
When use it first. Please pull out film which the battery protrudes.
After installed the battery to push back the tray.
!
CAUTION
Please keep the battery away from the children. If the battery was pushed back
by him. Please see a doctor at once.
!
CAUTION
Only use a 3V lithium battery.
The remote control does not use in one month at least, please take out the
battery.
Do not electricize to the battery, tears down, heats up or abandons it in the fire.
Do not operate the battery with metal tool.
Do not store the battery with metal material.
If the battery leak liquid, please wipe it off and install the new battery.
Deal with the used battery. To obey the local government laws and regulations
of your country or the environment public organization' s rules.
Because of the unit compatible
duplication system.
Therefore, when play the disc
which has forbid copying signal,
the image can watch when
certain display monitors appear
the horizontal stripe or oder
flaws.
The troubles in VCD playing
Trouble
PBC (play control)
menu display will
not be searched
out.
Fails to repeat &
track and time
searching.
Reason
Measure
The playing VCD has
no PBC.
The playing VCD has
PBC.
39
The VCD without PBC can not
carry out this operation.
The VCD with PBC can not
carry out this operation.
Use remote control
'
The remote control operation aimed the front panel. The remote control cant
work normally to direct the sunlight.
!
CAUTION
Do not keep the remote control to direct the high temperature or sunlig
h t.
Do not keep the remote control falling the floor. So that it was clipped in below of
the brake or gun.
4
Disc Handling And Maintenance
Troubleshooting
Common Trouble
Disc Using
To keep the disc clean, please hold the disc edge only, do not touch its
surface.
Do not stick the label or adhere things on the disc.
Trouble
The power
fails to put
through the
unit does not
work
Reason
Measure
The down-lead and tie-in
has disconnected.
Please check whether the power
has been connected correctly.
Fuse broke off.
Removes reason which the fuse
broke off, then chang the fuse.
For god's sake to install the right
same tating fuse.
The noise and other factor
caused the Built-in MPU
fails to work normally.
Press 'RESET' button.
The wire has discconnected. Connect the wire correctly.
Incorrect
Correct
No sound
Do not expose the disc into direct sunshine or near the hot sources.
After playing, please store it into the disc box.
No picture
Disc Cleaning
1 Before playing, wipe the disc with a clean cloth, from the centre hole
towards the outer edge .
Touch screen
can ' t operate
normally by
tiuching
The remote
control does
not work
Disc Storing
After playing, please store the disc into the dis c box and keep them in room
temperature. It can help to extend the using life of the disc effectively.
5
Enforce the repose, slow motion
or per frame to play has no
sound.
The grip brake wire has
disconnected.
Connect the grip brak wrie, then
pull it up.
The grip brake has not
pulled up.
Connect the grip brak wrie, then
pull it up.
Icon display, The disc forbid operating.
the operation
This operation's structure
is unable to
with the disc do not
carry on
compatible.
Audio and
video leap
2 Never use alcohol, thinner, cleaning fluid, static electricity prevention
liquids or any other solvent to clean discs.
The unit enforcing the play
with repose, slow motion or
per frame to play.
The operation is unable to cany
on.
The operation is unable to cany
on.
The unit installed loose.
Fix the unit steadily.
Built-in MPU is unable to
normal work.
After launder the operations
normally.
The remote control does
not aim at its receiver
window.
The remote control aimed its
receive window.
The battery of remote
control die down.
Please use new battery instead.
Radio signal too low to store the
correct frequenly into the
storage.
Fail to reset
tune in radio
mode.
38
Playable Disc
Touch screen function introduction
This unit can play DVD, S-VCD, VCD, CD, MP3, MP4 etc. format discs.
1
Disc
types
3
DVD
Disc
symbols
VIDEO
Recorded
Contents
Audio+Video
(Motion Picture)
Disc Sizes
Playing time
About 2 hours
(single side disc)
12cm
About 4 hours
(double sides disc)
4
2
Audio+Video
(Note: The product does not correct any more after leaving factory,
because of all of products were corrected in production.
When touch no effection in the center screen, but touch the
sides of screen is valid,first press ' RESET '; and press
' POWER 'all the while, then leave the ' RESET ', press ' POWER '
over 2 seconds.
12cm
About 45 minutes
Audio+Video
(Motion Picture)
12cm
About 74 minutes
Audio
12cm
About 74 minutes
MP3
Audio
12cm
About 600 minutes
MP4
Audio+Video
compressed format
12cm
S-VCD
SVCD
COMPACT
VCD
DIGITAL VIDEO
(Motion Picture)
TV system/Radio frequency setup
COMPACT
CD
AUDIO VIDEO
OSD
TV
PAL
BG
DK
I
M
N
L
L
NTSC
SECAM
QUIT
DIGITAL AUDIO
SYS
RADIO
EUR.
USA.
AUS.
RUS.
MD,EAST
Picture 9-4
,
This interface setup TV system/radio frequency according to customer s
location. After setup it, press POWER on panel over 2 sec to turn off the unit
on panel over 2 sec to turn off the unit once, it will memory long this setup.
NOTICE:
Some DVD, S-VCD, VCD discs playing operation may be limited by the software
designer s special regulation, please refer to the instruction manual of disc. This
unit can play recorded discs (CD-R,CD-RW) too, but it depends on the quality and
recorded situation, some kinds of discs can not play in this unit.
PAY ATTENTION :
This player cannot playback diameter 8cm disc. To avoid damage of it, please
do not insert and play the above mentioned disc in this player.
37
6
Touch screen function introduction
Front Panel s Diagram
1
3
2
4
5
7
6
8
9 10
Touch screen character grounding setup
IR
R
AUDIO VIDEO
OSD
SYS
TRANS
BACK.R
BACK.G
BACK.B
07
1
00
00
2
22
QUIT
Picture 9-3
15
14
13
1. Power on/off & mute button
2. RESET button
3. Radio /searching up/DVD/next track/ fast-forward
4. Radio/searching down/ DVD/last track/fast-backward
12
11
1
Character grounding setup
07
Touch TRANS
to adjust the dark/light of character grounding.
2
RGB setup
Setup BACK.R/BACK.G/BACK.B to adjust the grounding of monitor, from
default blue to adjust to red/yellow etc.
If want to memory you setting color, after selecting you want it, Touch
QUIT for exit, turn off ' POWER ' and turn on it, you selected color will
memory in the unit for long time.
5. Disc play/pause button
Touch screen correcting setup
6. Disc slot window
7. Clock display button
8. Disc eject button
9. Remote control receiver
10. USB port
11. Radio/DVD/video/USB switch
12.PAL/NTSC switch
13. TFT off
14. LCD
15. Volume +/- button
7
To set up this button when touch screen working has warp,in order to set up
accurately, you can choose pointed tools (but pay attention to not damage
the screen surface) to operate. Touch '
' the center point in picture 9-3 to
appear ' + ' four times in turn(see next picture).According to the sequence of
picture,each time appear' + 'to click the crosspoint of ' + ',until click the fourth
to finish correction.
(Note: While correct the touch screen, must point at the ' + ' center point and
cant't touch other position or it will no effect or incline.)
36
Remote Control s Diagram
Touch screen function introduction
6
7
Treble adjust setup
Touch TRE to decrease treble loudness, touch TRE to increase treble
loudness.
Bass adjust setup
Touch BASS to decrease bass loudness, touch BASS to increase
bass loudness.
1
4
Personel picture effect setup.
Touch one of 1 - 5 on screen and adjust SATURATION/HUE/CONTRAST/
BRIGHT then the setup parameter will automatically to one of 1 - 5 which
selected.
1
2
3
4
5
6
7
8
9
SETUP
0/10
10+
21
2
3
Picture setup
22
1
5
19
STOP
18
17
6
7
16
8
AUDIO VIDEO
OSD
4
30
HUE
3
2
30
20
SATURATION
2
5
17
CONTRAST
1
3
4
3
4
5
9
Picture 9-2
SATURATION setup
Touch SATURATION
20
to adjust the saturation of picture color.
HUE setup
Touch HUE
30
to adjust the deep/light of picture color.
CONTRAST setup
Touch CONTRAST
30
to adjust the picture contrast.
BRIGHT setup
Touch BRIGHT
30
to adjust the picture bright.
_
10
13
12
11
1. Disc eject button
2. Random button
3. Repeat button
4. Set up button/*Location
5. Radio/stereo&DVD/stop
button/*Return
6. Radio/DVD/video/USB switch
7. Direction button / / /
8. Radio/searching down/last track
& fast-backward/*Zoom out
9. OSD/CLEAR button/*GPS
10. Volume up
11. Clock display button
(Note:The function with
35
14
+
5
1
2
15
SYS
BRIGHT
QUIT
20
12. Volume down
13. Language menu
14. Menu button
15. Radio/searching up/next track &
& fast-forward/*Zoom in
16. Confirm button
17. Band & Play/pause button
18. Title/zoom button
19. Radio/AMS & DVD/Searching
/Bookmarking/Program
20. PAL/NTSC switch
21. Numeric button
1-9, 0/10,10+
22. Power ON/OFF & mute button
*
only is valid in GPS mode.)
8
Function Instructions
Power on/off & mute button(
Touch screen function introduction
)
Press this button on panel/remote control to turn on the player.In turn on mode,
Press this button to activate the selecting mode of mute on/off.Press it for over
2 seconds to turn off the unit.
13
digit add 1 (If select track 35, first touch 10+ three times, then touch
5 ). ( VCD/DVD only)
QUIT For page quit button, touch it to quit the current page to return to
last page.
Volume control button(VOL+/-)
Press ' VOL+/- ' on panel or press it on remote control anytime to increase or
decrease the volume.
Radio DVD/video/USB switch(MODE)
press ' MODE ' button to switch as following:
Radio
DVD
USB
AV
E Multi-functional setup interface operation
After entering this interface AUDIO for audio setup interface see picture
9-1
VIDEO for picture setup interface see picture 9-2
OSD for screen
display accord interface ( see picture 9-3
SYS for country system select
setup interface see picture 9-4 .
1.In radio mode, press it change to disc playing mode.If no disc but with USB
in the unit, it will change to USB mode automatically.
2. In disc playing mode, press this button to change to USB mode.If no USB in
the unit, It will change to outer video AV/AUX input mode automatically.
3. In USB mode, press this button to change to outer video AV/AUX input mode.
Press it again to resume the radio mode.
AUDIO VIDEO
OSD
SYS
1
6
5
OFF
LOUD
2
7
--
TRE,
Reset button(RESET)
--
BASS
Press this button on panel to reset all the setting to default.
3
QUIT
EQ
1
2
3
4
5
Band switch & play/pause
In radio mode, press this button time and again to select needed band [FM1,FM2,
FM3,AM1,AM2,AM3].
In playing disc mode, means disc playing or pause function.
4
Picture 9-1
Clock display button(CLK)
1. Press 'CLK' button will display the time on screen.
2. Press it over 2 sec to enter the time adjust mode, the minute flashes, press
VOL '+/-' to adjust it, then press 'CLK' again, the hour flashes, press VOL'+/-'
to adjust it, after adjusting press it over 2 sec. the time will stop flashing.
Notice: The time will not disappear automatically. If you wouldn't like to display
the time, press 'CLK' once again.
TFT OFF button
Press 'TFT OFF' button on panel to close or open the TFT monitor.
Stereo and L/R channel button(S.L.R)
1. In FM band, press this button to switch Mono, Stereo output.
2. In disc playing mode, if the contents of disc have channel switch function,
press it to switch Stereo/Left/Right channel output.
9
Audio setup
1
2
3
4
5
Front/rear speaker setup touch
to setup the volume of front speaker,
touch
to setup the volume of rear speaker.
Left/right channel setup, touch to setup the volume of left speaker,
touch
to setup the volume of right speaker.
Interface quit button, touch QUIT button to return the last page.
Personal EQ storage setup
Touch any one of 1 - 5 on screen. Then adjust BAS/TRE/LOUD the
setup parameter will store to one of 1 - 5 which selected.
Loud setup
Touch LOUD to close LOUD, the monitor show
OFF
Touch LOUD to open LOUD, the monitor show
ON
34
Touch screen function introduction
Function Instructions
1
Touch this button to choose track up, press it over 2 sec means fastbackward function.
2
Touch this button means disc pause/play function.
3
Touch this button to choose track down, press it over 2 sec means
fast-forward function.
4
Repeat button, Touch this button to repeat single track playback or full
disc playback mode.
5
Random button, Touch this button to choose random function.
6 A-B Repeat playback button, fix point repeat (A-B) allow to playback
repeatly between any 2 points, In playback process, In start point (A) of
playback, when the point A has setup, then setup the end point (B) of
needed playback. When the point B has setup, then touch A-B button, it
will playback repeatly between A and B. If want to quit this function, then
touch A-B button once again.
7 MENU To setup the open and close of menu.
8 1/2 In this interface, press this button to enter the next page interface.
see picture 6
9 Source Touch this button to enter the main interface mode of unit to
choose other mode.(see picture 3
10 Setup Touch this button to enter the function setup interface.(see
picture9-1/2/3/4
13
QUIT
11
1
2
3
5
4
6
7
8
Display all selected functions.
Radio/searching down/DVD/last track/fast-backward(
)
1. In radio mode, Press
on panel/remote control to adjust the receiver
frequency down. Press and hold it for over 2 seconds to search down
automatically.
2. In disc playing mode, Press
to select the last track.
3. In disc playing mode, press
button over 2 seconds to select fast-backward
f unction to select fast backward speed as following:
Example: fast backward X2, X4, X8 ,X16 playing.
Radio/searching up/DVD/next track/fast-forward(
)
1. In radio mode, Press
on panel/remote control to adjust the receiver
frequency up. Press and hold it for over 2 seconds to search up automatically.
2. In disc playing mode, Press
to select the next track.
3. In disc playing mode, press
button for over 2 seconds to select fast
forward, to select fast forward speed as following:
Example: fast backward X2, X4, X8 ,X16 playing.
Disc eject button (
)
Press it to eject a disc, and change to radio mode automatically. After ejecting
the disc, it will enter automatically if not take it out in 10 seconds, but not
playing.
Disc slot window
Insert the disc into slot, CD will begin to play, and the name and number of the
track will appear too.
Auto-memory & scan storage button(AMS)
+10
0
LCD
9
12
1. In radio made,press PRG/AMS on remote control over 3 sec, the unit will
select the strongest local 6 stations automatically to store the NO.1-6 stations in
order. FM includes FM1, FM2, FM3, each can store 6 stations, at most 18
stations. AM includes AM1, AM 2, AM3, each can store 6 stations, at most 18
stations.
Confirm button(ENTER)
Press this button to confirm the selected menu.
Picture 6
11
12
For menu direction select, menu confirm button.
The digital button is used to select track, if certain part or track has 2
digits, first touch 10+ ; then touch the first digit (If select track 15, first
touch 10+ button once, then touch 5 ). Touch 10+ once, the second
Language menu(AUDIO)
In disc playing mode, press it on remote control to adjust channel output as below.
Left
Right
Mix
Stereo
USB function selection
Insert USB to USB port of this player, it will automatically playback the
33
10
Touch screen function introduction
Function Instructions
contents of USB.
1.During USB playback mode, press
button for selection of next track,
press
button for selection of last track. Press 2RPT on panel or
press 7RPT on remote control over 2 seconds to select the content of
USB for repeat playback function. Press 3RDM on panel or press
8RDM on remote control over 2 seconds to select the content of USB
for random playback function. Press direction button
/ / /
on remote
control to select you liked tracks for playback.
2.If desire changing to other playback mode, you can press MODE button
to switch.
1
2
Touch this button to enter the radio mode. (See picture 1)
Touch this button to enter the TV mode. This unit no TV function
now).
This is SD card mode, when insert SD card on panel. This unit no
SD card function now).
Touch this button to enter the outer AUX input mode. (See picture 4)
AUX
Touch this button to enter the bluetooth mode.(This unit no bluetooth
function now).
Touch this button to enter the disc playback mode. (See picture 5)
Touch this button to enter the GPS mode.(While no GPS function,
so no this operation.)
Touch this button to enter the USB playback mode.
The
main interface quit button, touch this button to quit the original
QUIT
operation mode. For example: From disc playback mode to enter the main
interface, to quit means former disc playback mode.
RADIO
TV
3
CARD
4
5
Bluetooth
6
7
DVD
PLAYER
NAV
8
9
Numeric button
In radio mode
1. Press and hold any one button 1-6 on remote control for over 2 seconds to
store the radio stations to the memory you are listening.
2. From 1-6, press any one button to call out the memory.
In disc playing mode
1. Numeric buttons on remote control are used to select the tracks . If certain
segment or track has two digits, press the first digit, and press the second
digit, then press ENTER button (eg: select track 15 ,you can press
1 once then press 5 and press ENTER button).
2. In disc playing mode, press and hold 7RPT button over 2 seconds means
Single song repeat/Full disc repeat/ repeat OFF.
3. In disc playing mode, press and hold 8RDM button over 2 seconds means
Random playback.
Press it again to shut off this function.
4. In DVD or VCD mode, first press STOP on remote control, then press and
hold 9P/N over 2 seconds interchange between PAL/NTSC systems.
USB
C. AUX mode
1
Some VCD and S-VCD discs(especially Karaoke discs) have some menus.
They are used to select the contents you want to enjoy. This type of menu can
also be called PBC .
When playing this type of discs:
1. Press the MENU button to setup PBC.
2. Press the numeric buttons to enter the segment of the track you want to play.
While PBC shut off, you can press numeric button on remote control to select
track. While PBC turn on, press numeric button on remote control can not
select track.
Warning! If no operations are executed within 10 seconds after the PBC MENU
is displayed, the unit will continue to play from the first track.
D. The operation of disc playback interface
Source
1
Setup
2
3
4
5
Picture 5
11
2
Source Touch this button to enter the main interface of unit to choose
other mode. see picture 3
Setup Touch this button to enter the function setup interface see picture
9-1/2/3/4
9
MENU SETUP
Setup
Picture 4
1
2
VCD/SVCD PBC MENU
Source
32
A-B
MENU
1
6
7
8
2
10
Touch screen function introduction
Function Instructions
10
Touch this button to eject disc when a disc in the tray.
11 BAND Touch this button to choose FM1 FM2 FM3 AM1 AM2 AM3.
12
Last page / next page interface choose button, Touch this button to
enter the next page of radio. (See picture 4)
13 Band/LO/DX show column.
14 The disc show column, it will show the disc symbol when a disc in the tray.
FM1
Source
DX
1
1. In disc playing mode, press this button on remote control to memory stop mode.
Press BAND/
button again to continue playback.
2. Continuously press STOP button twice to stop completely. press
BAND/
button to play the disc newly.
3. In radio mode, press this button means sound channels switch function.
8 7 . 5 0 MHz
TITLE/ZOOM BUTTON
2
3
5
4
6
BAND
1. In DVD disc playing mode, Press this button on remote control to activate
selecting title function.
2. Press this button on remote control over 2 seconds to activate the picture
enlarge function. Press once to enlarge one times of the original, twice to
enlarge for 2 times; and three times to enlarge for 3 times, press it again
to return Normal.
14
Picture 2
15
Touch any one of 1 - 6 button over 2 sec to store the listening station to
this button memory. Touch any one of preset stations 1 - 6 to call out the
stations which preset to this memory.
B. The main interface operation
1
3
2
TV
RADIO
4
PLAYER
CARD
USB
Bluetooth
NAV
QUIT
7
6
Picture 3
31
OSD/CLEAR
1. In disc playing mode, Press OSD on remote control over 2 seconds, the
OSD will display the current playing disc message eg. Disc type, disc reading
time, title, chapter, audio, subtitle, angle,bit rate, track, ect.These display
message depends on disc type, version format and authoring of disc. (This
function don' t support the still picture disc, such as CD/MP3 disc, press this
button over 2 seconds OSD no valid). If want to quit OSD, then press it over
2 seconds.
Note: This information only can be watching but can t be adjusted.
AUX
DVD
5
1. In radio mode, press this button on remote control to use auto-memory and
scan storage function.
2. In disc playing mode, press this button for search setup playback, press it
over 2 seconds for program setup playback function. (Details will be
described in program playback).
RADIO/STEREO & DVD/STOP BUTTON
Setup
22
1
Radio AMS & DVD Searching/Bookmarking/Program(PRG/AMS)
8
9
NOTE: If has horizontal line twinkling under the screen while reverse
your car, the reason that camera video system is not same as
this unit, then press 9 P/N on remote control in order to
make the same as system between camera video and this unit.
In this way, the picture will not appear horizontal line twinkling.
,
All of the outer input video system must be same as this unit s,
then switch MODE button, it will not has horizontal line
twinkling.
If need to use this correct system for long time, press POWER
to turn off the unit, to turn on it again, the correct system will
memory in the unit for long time.
12
Basic Operations
Touch screen function introduction
A. The introduction of radio s touch interface
Basic playback
In disc playing mode, press
on panel or remote control to eject the
disc, if doesn't take out the disc, and press it to start playback. If no take it
out within 10 seconds, it will enter the units automatically, but no reading
disc, display radio mode interface and disc icon. If want to continue
playback, press MODE to switch to disc playing mode and playback it
repeatly.
When turn on the unit first time, the monitor will enter the radio default interface.
The display mode as picture 1:
13
1
DX
1
3
Pausing Playback
1. Press BAND/
2. Press BAND/
FM1
Source
14
Setup
2
8 7 . 5 0 MHz
on remote control to pause playback (still mode ).
on remote control to resume normal playback.
4
Stopping Playback (show the Player logo screen ) and Resuming
Playback after Stopping
1. Press STOP to stop playback and show the logo playback is stopped.
on remote control to resume playback
2. Press BAND/
from the location where playback is stopped (DVD, VCD 1.1, VCD 2.0/SVCD/
CVD and audio CD).
on remote control
3. Press STOP twice to stop playing, then press BAND/
to resume playback from the beginning of the disc.
5
7
8
9
10
11
12
Picture 1 introduction:
2
3
4
5
6
Menu Navigation (DVD/VCD)
13
6
BAND
Picture 1
1
1. Press TITLE to invoke Title Menu (DVD/VCD only, dependent on authoring of
disc).
It must open PBC in VCD format, or it will return to title menu.
2. Press direction buttons to highlight selected Title Menu entry.
3. Press ENTER or BAND/
on remote control to select the highlighted entry.
If the highlighted entry indicates a title,that title will play from Chapter 1.
4. Press MENU to invoke the menu screen included on many DVDs (DVD only).
5. Press
/ / /
direction buttons to highlight a selected menu entry.
LO DX
AMS
Fast Forward/Fast Backward
In normal disc playing mode, press
or
on panel or remote control
for fast forward / fast backward, each press it over 2 seconds once, the
different speed will be selected as X2, X4, X8, X16 for fast forward /fast
backward, the most speed is X16 . In X16 fast forward speed mode, press
over 2 seconds to resume normal playback. In X16 fast backward
speed mode, press
over 2 seconds to resume normal playback.
22
7
8
9
Source Touch this button to enter the main interface mode to choose
other mode. (See picture 3)
Setup Touch this button to enter function setup interface. see picture
9-1/2/3/4
The show column of radio position and frequency.
The show column of volumn adjustment.
Touch this button to search stations up, press it over 2 seconds to
search stations fast upward.
AMS Touch this button to search stations automatically, and played 5
seconds in each station, touch it over 2 sec to search stations
automatically, and stored to NO.1-6 in order. FM stored in FM1:1-6,
FM2:1-6 , FM3:1-6, at most 18 stations, AM stored in AM1:1-6, AM2:1-6 ,
AM3:1-6, at most 18 stations.
Touch this button to search stations down, press it over 2 seconds to
search stations fast downward.
LO DX
Touch this button to choose LO/DX mode, the show column will
display opeartion indication: LO or DX.
Touch this button to choose Radio/Stereo/Mono mode.
30
Basic Operations
MP3 Functions
MP3 adopts to a standard which is the newest compressed technique of video digital
playing, one disc can store more than 600 types of music, or more than 160 songs, and
have the same quality as CD.
6. Press ENTER or BAND/
on remote control to select the highlighted entry.
If the highlighted entry indicates a c hapter or title, the disc will play from the
selected spot.
DISC PLAYBACK
Use the digital button to select the song playing directly.
1. According to the basic operating process, insert the disc correctly, the player will
start to search the disc information, and then show the message on the screen.
2. Within 10 tracks can be selected to press numeric button directly.
3. Selecting track is two digit or three digit.
Eg: selecting the 35th track, press 3 button, and press 5 ,then press
ENTER button it will playback the 35th track automatically. If selecting
135th track, press 1 button, and press 3 button, then press 5 , and
press ENTER again.
SELECT TRACK
1. The MP3 Menu is automatically opened and a list of tracks displayed when an MP3
disc is inserted into the player.
The player plays the first track auto matically, the elapsed time within the
track is displayed on the right side of the top line, when the track is finished,
the second track will begin playin g and the track number on the top line will
be updated. Press STOP to stop playback of the current track.
Means current folder
Means the current playing track
Means all the tracks of disc
Means the playing time
Means the playing track
07/16
00 00 23
/CD01/Track06.MP3
Filter
Repeat :Off
Mode
:Normal
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Music Playing
Selecting a Track to Play
1. Use the
/ / /
direction buttons to move to different track numbers.
2. Press the RIGHT direction button when the highlighted track is in the column on
the far right, and up to five more tracks in the current directory will be displayed.
3. Press the LEFT direction button when the highlighted track is in the column to the
far left, and the previous five tracks will be displayed.
4. Press ENTER on a track number, and that track will begin to play.
5. Enter a track number with the number keys to play a track and press SELECT/
ENTER. The digits will appear in the message area as the keys are pressed.
In this case, the track display doesn t change. After pressing SELECT/ENTER, the
track display changes if the selected track is not in the current display.
29
Menu Navigation (PBC)
1. Press MENU to enable/disable PBC functionality with VCD 2.0/SVCD/CVDdiscs.
PBC must be enable for menu navigation.
2. Press a number on the number pad to select a track to play (VCD 2.0/SVCD/CVD
only).
Note:
While VCD in PBC shut off, you can press numeric button on remote control to
select track. In PBC turn on, press numeric button can't select track directly.
You should press PRG/AMS button to select track in searching.
Skipping to the Next/Previous Chapter/Track
1. Press
to skip forward to the beginning of the next chapter (DVD) or track
(VCD/SVCD/CVD, audio CD).
2. Press
to skip backward to the beginning of the previous chapter or track.
Note:
Playback resumes to normal speed after skipping to the beginning of a chapter.
Advanced Playback
1. Search playback
A. In disc playing mode, press PRG/AMS on remote control once, to pop
up the search setup item: title, chapter, track, time, full disc time, etc.
For selecting setup search playback, the setup column display depends
on disc format.
B. Enter the search setup column, press
/
direction button on remote
control to move the yellow cursor, until to desired option, press 0 - 9
numeric button on remote control to set the desired title, chapter, track,
time or full disc time, etc. then press Enter enter the setting search
position for playback.
Note: press PRG/AMS once, to pop up search setup column, if no
operation in 10 seconds, the setup column will disappear
automatically.
2. Program playback
A. In DVD/VCD playing mode, press PRG/AMS on remote control over 2
seconds to enter the program playback list, press
/
direction button
on remote control to move the yellow cursor, and select title, chapter or
14
Basic Operations
Basic Operations
track for program in the left list, then press Enter to program into the
right program list, this list was most programed 16 chapters/tracks as
bellow:
3. Press
press
direction button, move cursor to Divx Registration option,
Enter to pop up the following window, select OK option.
Language
Video
Program
The current
playing disc
track list
1
3
5
7
9
11
13
15
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Play
Clear
2
4
6
8
10
12
14
16
Audio
Divx Video Demand
Your registration code is:
D7YYMU91
(http://www.divx.com/vod)
Rating
Program list
OK
Misc
Clear All
4. Press
press
B. After programed chapters/tracks for need to playback, press
direction button to move the yellow cursor to select Play , press
Enter to playback the programed chapters/tracks in program list.
C. In program mode, move the yellow cursor to Clear , press Enter
to clear the last chapter/track in the program list, then move the yellow
cursor to Clear all , press Enter to clear all of chapters/tracks in the
program list, next to press PRG/AMS over 2 seconds to continue
playback the current disc.
direction button, move cursor to
Enter to select On/Off option.
On = Turn on screen saver
Off = Turn off screen saver
3. CD/MP3 Program playback
Step1 select files add to program playback list.
A. In CD/MP3 menu, press
direction button on remote control to select
yellow cursor, then move to right.
B. Next to press
/
direction button, and select Edit mode , then
press Enter button (now Edit mode was selected).
C. Next to press
direction button, select the files which need add to
program list, press Enter button (the selected files have
marks.)
D. After selecting files which need to add to program list, press
direction button, then press
direction button select add to program,
press Enter on remote control (Now the selected files of C will add to
program list).
15
28
Screen saver option,
Basic Operations
Basic Operations
Press
/
direction button to select : 1 Kid Safe/2 G/3 PG/4 PG-13
/5 PG-R/6 R/7 NC-17/8 Adult. Then press Enter to cycle through
the available option.
Kid Safe = Only title a parental control setting of 1 are allowed to play
G
= Only title a parental control setting of 2 or less are allowed to play
PG
= Only title a parental control setting of 3 or less are allowed to play
PG-13 = Only title a parental control setting of 4 or less are allowed to play
PG-R
= Only title a parental control setting of 5 or less are allowed to play
R
= Only title a parental control setting of 6 or less are allowed to play
NC-17 = Only title a parental control setting of 7 or less are allowed to play
Adult
= Allow any title to play (factory default).
Notes:
1. Parental Control functions only if the DVD title has it encoded in its
program. Parental Control does not work for VCD/SVCD/CVD or CD Audio.
2. The Rating can change only while unlock the password.
3. Set password setting:
Press
/
direction button, move yellow cursor to Set password ,
press Enter to pop up the Enter password window, enter the
back-door password (Back-door password:8888) then set new password,
and open parental control options.
Misc settings
1. In setup interface mode, press
/
direction button, move yellow
cursor to Misc option, press Enter to appear Misc as bellow:
2. Press
direction button, move cursor to Use Default Settings option,
press Enter to pop up window Use Default Settings , there are two
selections: Yes/No.
No = Return to use Default Settings.
Yes = Use Default Settings.
Language
Video
Audio
Use Default Settings
Divx Registration
Screen saver
Rating
Misc
27
:On
07/16
00 00 23
/CD01/Track06.MP3
Filter
Repeat :Off
Mode
:Normal
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Music Playing
Step2 view the program list.
E. Next to D press
direction button to select program view (Now the
selected files of C will display on the left).
Step3 play the tracks of program list.
F. Next to E press
direction button, the cursor move to program mode,
press Enter button (Now quit program mode).
G. Next to press
direction button, select desired playback track in
program list, press Enter to start program playback.
Step4 add the tracks to program list.
H. If add tracks to program list, repeat A-E operation to add the tracks of
program list.
Step5 clear the tracks of program list.
I. First press STOP on remote control twice to stop the current playback
fully.
J. Next to G or H press
direction button, then press
/
direction button
to select Edit mode newly.
K. Now select the tracks of program list randomly, the selected tracks have
marks.
L. Then press
direction button to move yellow cursor, select Clear
program playback to press Enter button, now the selected tracks of
K will be cleared from program list.
4. CD-ROM basic operation
A. CD-ROM disc is same as the CD/MP3disc operation.
B. In CD-ROM disc playing mode, press
direction button to move
yellow cursor, select filter to view audio, picture, video mode, the open
mode have
marks, these 3 options factory default is open mode.
C. Next to press
direction button to return the left, press
direction button to select picture folder, and move cursor to select
picture files, then press Enter have picture output.
16
Basic Operations
Basic Operations
D. Next to press STOP button to return picture files list, press
/
direction button to view picture files, then the picture from picture files will
display in the right JPEG preview window.
E. At the same time the audio and picture playback mode, press Title/Zoom
on remote control to preview 9 menu, then press
/ / /
direction
button to select the desired picture, then press Enter to open it.
F.In open picture mode,press
direction button to rotate picture
clockwise for 90 degrees,press it again for 180 degrees,then press it for
270 degrees,next press it the picture no rotate to back normal mode.
press
direction button to rotate counter clockwise for 90 degrees,
press it again for 180 degrees,then press it for 270 degrees,next press it
the picture no rotate to back normal mode.
Press
/
direction button to rotate picture for 180 degrees,press it
again the picture no rotate to back normal mode.
Language
Video
Digital Output
Smart Sound
Audio
Rating
:PCM
Off
Classical
Rock
Jazz
Pop
Misc
Press
/
direction button to select : Off/Classical/Rock/Jazz/Pop
option. Press Enter to cycle through the available option.
Rating settings
1. In setup interface mode, press
/
direction button to move yellow
cursor to Rating option, press Enter to appear Ratings as bellow:
SD card & USB Ripping
* (This unit no SD card function now.)
To insert CD format disc playback while SD card & USB in the unit as below
(This operation is valid only CD format disc.)
Language
Video
Parental control
:8. Adult
Set Password
Audio
00
07/16
00
23
/Track06.CDA
Contents
Ripping
Filter
Repeat :Off
Mode
:Normal
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Track08
Rating
Misc
2. Press
direction button, move cursor to Parental control option,
press Enter to appear 8 kinds of Parental control for selection as bellow:
Music Playing
Language
Video
Audio
1.press
direction button to move the cursor to right side,then press
/
direction button to move the cursor to Ripping ,press Enter
on remote control to confirm.
17
Rating
Misc
1 Kid Safe
2 G
Set Password
3 PG
4 PG-13
5 PG-R
6 R
7 NC-17
8 Adult
Parental control
26
Basic Operations
Basic Operations
Press
/
direction button to select : Standard/Bright/Soft/Dynamic
option, press Enter to cycle through the available option.
00
07/16
Audio settings
1. In setup interface mode, press
/
direction button to move yellow
cursor to Audio option, press Enter to appear as bellow:
Language
Video
Digital Output
Smart Sound
:PCM
:Off
00
23
/Track06.CDA
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Track08
Contents Ripping
Destination
Select all
Rip quality:High
Available space
0MB
Size of selected
0MB
Audio
Rating
Misc
2.Next to press
direction button to move the cursor to Destination
then press Enter on remote control to appear 2 kinds of destination for
selecting.
2. Press
direction button, move cursor to Digital Output option,
press Enter to appear 3 kinds of Digital Output for selection as bellow:
Language
Video
Digital Output
Smart Sound
Audio
Off
PCM
All
00
07/16
00
23
/Track06.CDA
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Track08
SD
USB
Contents Ripping
Destination
Select all
Rip quality:High
Available space
0MB
Size of selected
0MB
Rating
Misc
Press
/
direction button to select : Off/PCM /All option. Press Enter
to cycle through the available option.
3. Press
direction button, move cursor to Smart Sound option,
press Enter to appear 5 kinds of Smart Sound for selection as bellow:
25
press
direction button to select SD card or USB option,then
press Enter to appear
mark in back of the confirmed option.
3.Next to press
/
direction button to select the desired files whilch
ripping to SD card or USB ,ten press Enter button (the selected
files have
marks).
If will select all to press
direction button to move the cursor to
Select all ,then press Enter to confirm.
If will unselect all to press
direction button to move the cursor to
Unselect all ,then press Enter to confirm.
18
Basic Operations
Basic Operations
4.After selecting the desired files which ripping to SD card or USB
press
/
direction button to move the cursor to Rip quality ,
press Enter to select the rip quality[Medium/High/Best/Low].
5.Next to press
direction button to move the cursor to Ripping
start ,then press Enter to start ripping.
,
3. Press
Enter
direction button, move cursor to Video mode option, press
to appear 4 kinds of video mode for selection as bellow:
Language
Video
Audio
Rating
00
07/16
00
23
0/100
Available space
Cancel
0MB
:4 : 3
Fill
Original
Auto Fit
Pan Scan
Misc
Contents Ripping
Un select all
quality:High
Dont removeRip
card
start
Track 0.2.CAD
/Track06.CDA
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Track08
Aspect Ratio
View Mode
TV System
Smart Picture
Press
/
direction button to select : Fill/Original/Auto Fit/Pan Scan
option, press Enter to cycle through the available option.
4. Press
Enter
Size of selected
direction button, move cursor to TV system option, press
to appear 3 kinds of TV system for selection as bellow:
29MB
Language
Video
Audio
If want to stop ripping, press Enter directly,press
button to select Yes ,then press Enter to confirm.
00
07/16
00
23
Contents Ripping
Un select all
quality:High
Dont removeRip
card
start
DoTrack
want to
stops
0.2.CAD
/Track06.CDA
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Track08
0/100No
Yes
Cancel
Available space
0MB
Rating
direction
Aspect Ratio
View Mode
TV System
Smart Picture
Misc
Press
/
direction button to select : NTSC/PAL/Auto option, press
Enter to cycle through the available option.
5. Press
Enter
direction button, move cursor to Smart Picture option, press
to appear 4 kinds of Smart Picture for selection as bellow:
Language
Size of selected
Video
29MB
Audio
Rating
Aspect Ratio
View Mode
TV System
Smart Picture
Misc
19
:4 : 3
: Auto Fit
NTSC
PAL
Auto
24
:4 : 3
: Auto Fit
: NTSC
Standard
Bright
Soft
Dynamic
Basic Operations
Basic Operations
Press
/
direction button to select different subtitle language: English/
French/Spanish/Italian/Portuguese/Thal/Chinese/Turkish/Russian. Then
press Enter to cycle through the available option.
Notes:
1. The above language output depends on disc.
2. The factory default language preference is English.
Playback setup interface operation
To enter setup interface
A. In disc playing mode, press Setup once remote control to enter setup
interface.
B. In setup interface have 5 option for selection: Language, Video, Audio,
Rating, Misc.
Language settings
Video settings
1. In setup interface mode, press
/
direction button to move yellow
cursor to Video option, press Enter to appear video setup as bellow:
1. In setup interface mode, press
/
direction button on remote control
to move yellow cursor to Language option, press Enter to appear as
bellow:
Language
Video
Language
Video
Audio
Rating
Aspect Ratio
View Mode
TV System
Smart Picture
4:3
Auto Fit
NTSC
Standard
Audio
Rating
Misc
OSD language
Subtitle
DIVX Subtitle
Audio
DVD menu
English
English
Unicode
English
English
Misc
2. Press
direction button to move cursor to Aspect Ratio option,
press Enter to appear 2 kinds of mode for selection as bellow:
Language
Video
Audio
Rating
Aspect Ratio
View Mode
TV System
Smart Picture
4: 3
16:9
Standard
Misc
2. Press
direction button to move cursor to OSD Language , press
Enter to appear 9 kinds of language for selection as bellow:
Language OSD language
Subtitle
Video
DIVX Subtitle
Audio
Audio
DVD menu
Rating
..
Turkce
Russian
Misc
Press
/
direction button to select : 4:3 / 16:9 option, press Enter to
cycle through the available option.
23
English
Francais
~
Espanol
Italiano
~
Portugues
20
Basic Operations
Basic Operations
Press
/
direction button to select different language: English/
..
~
~
Francais/Espanol/Italiano/Portugues/
/
/Turkce/Russian. Then
press Enter to cycle through the available option.
3. Press
Enter
direction button to move cursor to Subtitle option, press
to appear 11kinds of subtitle language for selection as bellow:
Language OSD language
Subtitle
Video
DIVX Subtitle
Audio
Audio
DVD menu
Rating
Misc
English
French
Spanish
Italian
Portuguese
Thal
Chinese
Turkish
Russian
Press
/
direction button to select different subtitle language: English/
French/Spanish/Italian/Portuguese/Thal/Chinese/Turkish/Russian/AUTO/
OFF. Then press Enter to cycle through the available option.
4. Press
direction button to move cursor to Divx Subtitle option,
press Enter
button to appear 7 kinds of Divx subtitle for selection as
bellow:
Language OSD language
Subtitle
Video
DIVX Subtitle
Audio
Audio
DVD menu
Rating
Misc
21
:English
Unicode
Western European
Turkish
Central European
Cyrillic
Thai
Chinese
ISO8859 Thai
Press
/
direction button to select : Unicode/Western European
/Turkish/Central European/Cyrillic/Thai/Chinese/ISO8859 Thai option.
Then press Enter to cycle through the available option.
5. Press
direction button to move cursor to Audio option, press
Enter to appear 9 kinds of audio language for selection as bellow:
Language OSD language
Subtitle
Video
DIVX Subtitle
Audio
Audio
DVD menu
Rating
Misc
English
French
Spanish
Italian
Portuguese
Thal
Chinese
Turkish
Russian
Press
/
direction button to select : English/French/Spanish/Italian/
Portuguese/Thal/Chinese/Turkish/Russian. Then press Enter to cycle
through the available option.
6. Press
direction button to move cursor to DVD menu option, press
Enter to appear 9 kinds of menu language for selection as bellow:
Language OSD language
Subtitle
Video
DIVX Subtitle
Audio
Audio
DVD menu
Rating
Misc
22
English
French
Spanish
Italian
Portuguese
Thal
Chinese
Turkish
Russian
Download PDF
Similar pages