stage management products - choir “stick” mics

STAGE MANAGEMENT PRODUCTS - CHOIR “STICK” MICS
#CSM-40 AND #CSM-60 CHOIR “STICK” MICROPHONES
The CSM-60 and CSM-40 Choir “Stick” Microphone offers the ultimate performance of an
overhead hanging choir mic in a totally portable
configuration. The low profile, light weight, black,
aluminum, space age alloy “Stick” mic is available
in both 40” and 60” models. The “Boom Stick”
places the microphone element ideally above and
over any choir. This versatile “Stick” microphone
mounts on any standard microphone stand with any
standard taper-body mic stand clip. It is extremely
stable and will not easily tip over. Five pick-up
pattern choices mean one will be right for your
needs. Use the CSM-40 or CSM-60 Choir “Stick”
Microphone for children or adult groups on the
stage steps, portable risers or anywhere.
Choir “Stick” Microphone Model Numbers
MODEL # DESCRIPTION
#CSM-40/C..........40” Long Choir “Stick” Mic w/ 120º Cardioid Element
#CSM-40/H..........40” Long Choir “Stick” Mic w/ 100º Hypercardioid Element
#CSM-40/ML.......40” Long Choir “Stick” Mic w/ 90º MicroLine Element
#CSM-60/C..........60” Long Choir “Stick” Mic w/ 120º Cardioid Element
#CSM-60/H..........60” Long Choir “Stick” Mic w/ 100º Hypercardioid Element
#CSM-60/ML.......60” Long Choir “Stick” Mic w/ 90º MicroLine Element
#CSM-40 AND #CSM-60 CHOIR “STICK” MICROPHONE SPECIFICATIONS
®
MODEL
NUMBER
MOUNT
TYPE
POLAR
PATTERN
ELEMENT
TYPE
FREQUENCY
RESPONSE
OPEN CIRCUIT
SENSITIVITY1
MAX INPUT
SOUND LEVEL2
DYNAMIC
RANGE3
SIGNAL-TONOISE RATIO4
#CSM-40/60C
Stick Mic
Cardioid
-42 dB (7.9mV)
142 dB SPL
115 dB
67 dB
Stick Mic
Hypercardioid
40-20,000 Hz
-42 dB (7.9mV)
142 dB SPL
115 dB
67 dB
#CSM-40/60ML
Stick Mic
Microline
Fixed-charge
back plate
permanently
polarized
condenser
40-20,000 Hz
#CSM-40/60H
30-20,000 Hz
-35 dB (17.7mV)
135 dB SPL
109 dB
68 dB
1re 1V at 1 Pa = 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB | 2 1 kHz at 1% T.H.D | 3 1 kHz at Max SPL | 4 1 kHz at 1 Pa - Typical A-weighted using System 1
#CSM-40 AND #CSM-60 CHOIR “STICK” MICROPHONE DESCRIPTIONS
The CSM-40 (40” long) and CSM-60 (60” long)
Choir “Stick” Microphone features AUDIO
TECHNICA’S miniature back-plate condenser
elements assembled into an ultra light weight
aluminum boom shaft (.312” Dia.) for long reach,
high performance microphone applications. Each
“Stick” microphone version is supplied with a
Taper-Body Clutch Stand Mount and a U-U Clip
ready for use with any standard microphone stand. The CSM “STICK” MICROPHONE is a wide
range condenser microphone available with a series
of interchangeable elements. It is designed for
quality sound reinforcement, professional recording, television, and other demanding sound pickup
situations. The small-diameter gooseneck design
permits highly flexible positioning while maintaining a smooth, well contoured appearance. The
OUTPUT CONNECTION POWER MODULE
for the “Stick” microphone is an Integral 3-pin
XLRM-type, phased with PHANTOM POWER
REQUIREMENTS of 9-52V dc, 2mA typical and
an IMPEDANCE range of 200 ohms.
CHOIR “STICK” MICROPHONE
AUDIO-TECHNICA® PICK-UP ELEMENTS
CSM ELEMENT
The flexible design of the Audio Technica gooseneck allows greater
maneuverability of the condenser while maintaining a sleek, compact
appearance. Extra Audio Technica elements (Cardioid, Hypercardioid,
and MicroLine) optional.
ML™ ELEMENT
The MicroLine™ element designed by Audio Technica has a flexible
gooseneck and extra long microphone yielding a tighter pattern and
longer reach.
Choir “Stick” Microphone shown in use at a music conference
CHOIR “STICK” MIC INCLUDES...
TAPER BODY CLUTCH STAND MOUNT AND U-U CLIP
TAPER BODY CLUTCH STAND MOUNT
The simple design of the Taper Body Clutch Stand Mount
makes it easy to use on almost any standard microphone
stand. The compact size creates a sleek look while maintaining a stable foundation.
U-U CLIP
#Clutch Stand Mount
2
#U-U Clip
The U-U Power Module Clip captures the power module
against the mic stand for easy connection with mating cable. Made with state of the art molded plastic, this clip is strong
and durable. Available in black.
The Choir “Stick” Microphone is supplied
with a Phantom Power Module, a “U-U”
Power Module Clip, and a Taper Body Clutch
Stand Mount. The “Stick” Mic also requires
9-52v of Phantom Power and Does Not include
the stand.
For more information on Ace’s Choir
“Stick” Mics including specifications, polar patterns, and
installation guides, visit
www.acebackstage.
com
ACE BACKSTAGE CO., INC. • 24846 Avenue Rockefeller • Suite 200 • Valencia, CA 91355 • Tel: 661-295-5760 • Fax: 661-295-1122 • Web: www.acebackstage.com
Download PDF
Similar pages